1 files changed, 52 insertions, 126 deletions

diff --git a/drivers/media/video/ov2640.c b/drivers/media/video/ov2640.c
index 9ce2fa037b9..b5247cb64fd 100644
--- a/drivers/media/video/ov2640.c
+++ b/drivers/media/video/ov2640.c
@@ -18,11 +18,13 @@
 #include <linux/i2c.h>
 #include <linux/slab.h>
 #include <linux/delay.h>
+#include <linux/v4l2-mediabus.h>
 #include <linux/videodev2.h>
+
+#include <media/soc_camera.h>
 #include <media/v4l2-chip-ident.h>
 #include <media/v4l2-subdev.h>
-#include <media/soc_camera.h>
-#include <media/soc_mediabus.h>
+#include <media/v4l2-ctrls.h>
 
 #define VAL_SET(x, mask, rshift, lshift)  \
 		((((x) >> rshift) & mask) << lshift)
@@ -299,12 +301,10 @@ struct ov2640_win_size {
 
 struct ov2640_priv {
 	struct v4l2_subdev		subdev;
-	struct ov2640_camera_info	*info;
+	struct v4l2_ctrl_handler	hdl;
 	enum v4l2_mbus_pixelcode	cfmt_code;
 	const struct ov2640_win_size	*win;
 	int				model;
-	u16				flag_vflip:1;
-	u16				flag_hflip:1;
 };
 
 /*
@@ -610,29 +610,6 @@ static enum v4l2_mbus_pixelcode ov2640_codes[] = {
 };
 
 /*
- * Supported controls
- */
-static const struct v4l2_queryctrl ov2640_controls[] = {
-	{
-		.id		= V4L2_CID_VFLIP,
-		.type		= V4L2_CTRL_TYPE_BOOLEAN,
-		.name		= "Flip Vertically",
-		.minimum	= 0,
-		.maximum	= 1,
-		.step		= 1,
-		.default_value	= 0,
-	}, {
-		.id		= V4L2_CID_HFLIP,
-		.type		= V4L2_CTRL_TYPE_BOOLEAN,
-		.name		= "Flip Horizontally",
-		.minimum	= 0,
-		.maximum	= 1,
-		.step		= 1,
-		.default_value	= 0,
-	},
-};
-
-/*
  * General functions
  */
 static struct ov2640_priv *to_ov2640(const struct i2c_client *client)
@@ -701,81 +678,23 @@ static int ov2640_s_stream(struct v4l2_subdev *sd, int enable)
 	return 0;
 }
 
-static int ov2640_set_bus_param(struct soc_camera_device *icd,
-				unsigned long flags)
-{
-	struct soc_camera_link *icl = to_soc_camera_link(icd);
-	unsigned long width_flag = flags & SOCAM_DATAWIDTH_MASK;
-
-	/* Only one width bit may be set */
-	if (!is_power_of_2(width_flag))
-		return -EINVAL;
-
-	if (icl->set_bus_param)
-		return icl->set_bus_param(icl, width_flag);
-
-	/*
-	 * Without board specific bus width settings we support only the
-	 * sensors native bus width witch are tested working
-	 */
-	if (width_flag & (SOCAM_DATAWIDTH_10 | SOCAM_DATAWIDTH_8))
-		return 0;
-
-	return 0;
-}
-
-static unsigned long ov2640_query_bus_param(struct soc_camera_device *icd)
-{
-	struct soc_camera_link *icl = to_soc_camera_link(icd);
-	unsigned long flags = SOCAM_PCLK_SAMPLE_RISING | SOCAM_MASTER |
-		SOCAM_VSYNC_ACTIVE_HIGH | SOCAM_HSYNC_ACTIVE_HIGH |
-		SOCAM_DATA_ACTIVE_HIGH;
-
-	if (icl->query_bus_param)
-		flags |= icl->query_bus_param(icl) & SOCAM_DATAWIDTH_MASK;
-	else
-		flags |= SOCAM_DATAWIDTH_10;
-
-	return soc_camera_apply_sensor_flags(icl, flags);
-}
-
-static int ov2640_g_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl)
+static int ov2640_s_ctrl(struct v4l2_ctrl *ctrl)
 {
+	struct v4l2_subdev *sd =
+		&container_of(ctrl->handler, struct ov2640_priv, hdl)->subdev;
 	struct i2c_client  *client = v4l2_get_subdevdata(sd);
-	struct ov2640_priv *priv = to_ov2640(client);
-
-	switch (ctrl->id) {
-	case V4L2_CID_VFLIP:
-		ctrl->value = priv->flag_vflip;
-		break;
-	case V4L2_CID_HFLIP:
-		ctrl->value = priv->flag_hflip;
-		break;
-	}
-	return 0;
-}
-
-static int ov2640_s_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl)
-{
-	struct i2c_client  *client = v4l2_get_subdevdata(sd);
-	struct ov2640_priv *priv = to_ov2640(client);
-	int ret = 0;
 	u8 val;
 
 	switch (ctrl->id) {
 	case V4L2_CID_VFLIP:
-		val = ctrl->value ? REG04_VFLIP_IMG : 0x00;
-		priv->flag_vflip = ctrl->value ? 1 : 0;
-		ret = ov2640_mask_set(client, REG04, REG04_VFLIP_IMG, val);
-		break;
+		val = ctrl->val ? REG04_VFLIP_IMG : 0x00;
+		return ov2640_mask_set(client, REG04, REG04_VFLIP_IMG, val);
 	case V4L2_CID_HFLIP:
-		val = ctrl->value ? REG04_HFLIP_IMG : 0x00;
-		priv->flag_hflip = ctrl->value ? 1 : 0;
-		ret = ov2640_mask_set(client, REG04, REG04_HFLIP_IMG, val);
-		break;
+		val = ctrl->val ? REG04_HFLIP_IMG : 0x00;
+		return ov2640_mask_set(client, REG04, REG04_HFLIP_IMG, val);
 	}
 
-	return ret;
+	return -EINVAL;
 }
 
 static int ov2640_g_chip_ident(struct v4l2_subdev *sd,
@@ -1023,18 +942,13 @@ static int ov2640_cropcap(struct v4l2_subdev *sd, struct v4l2_cropcap *a)
 	return 0;
 }
 
-static int ov2640_video_probe(struct soc_camera_device *icd,
-			      struct i2c_client *client)
+static int ov2640_video_probe(struct i2c_client *client)
 {
 	struct ov2640_priv *priv = to_ov2640(client);
 	u8 pid, ver, midh, midl;
 	const char *devname;
 	int ret;
 
-	/* We must have a parent by now. And it cannot be a wrong one. */
-	BUG_ON(!icd->parent ||
-	       to_soc_camera_host(icd->parent)->nr != icd->iface);
-
 	/*
 	 * check and show product ID and manufacturer ID
 	 */
@@ -1060,22 +974,17 @@ static int ov2640_video_probe(struct soc_camera_device *icd,
 		 "%s Product ID %0x:%0x Manufacturer ID %x:%x\n",
 		 devname, pid, ver, midh, midl);
 
-	return 0;
+	return v4l2_ctrl_handler_setup(&priv->hdl);
 
 err:
 	return ret;
 }
 
-static struct soc_camera_ops ov2640_ops = {
-	.set_bus_param		= ov2640_set_bus_param,
-	.query_bus_param	= ov2640_query_bus_param,
-	.controls		= ov2640_controls,
-	.num_controls		= ARRAY_SIZE(ov2640_controls),
+static const struct v4l2_ctrl_ops ov2640_ctrl_ops = {
+	.s_ctrl = ov2640_s_ctrl,
 };
 
 static struct v4l2_subdev_core_ops ov2640_subdev_core_ops = {
-	.g_ctrl		= ov2640_g_ctrl,
-	.s_ctrl		= ov2640_s_ctrl,
 	.g_chip_ident	= ov2640_g_chip_ident,
 #ifdef CONFIG_VIDEO_ADV_DEBUG
 	.g_register	= ov2640_g_register,
@@ -1083,6 +992,21 @@ static struct v4l2_subdev_core_ops ov2640_subdev_core_ops = {
 #endif
 };
 
+static int ov2640_g_mbus_config(struct v4l2_subdev *sd,
+				struct v4l2_mbus_config *cfg)
+{
+	struct i2c_client *client = v4l2_get_subdevdata(sd);
+	struct soc_camera_link *icl = soc_camera_i2c_to_link(client);
+
+	cfg->flags = V4L2_MBUS_PCLK_SAMPLE_RISING | V4L2_MBUS_MASTER |
+		V4L2_MBUS_VSYNC_ACTIVE_HIGH | V4L2_MBUS_HSYNC_ACTIVE_HIGH |
+		V4L2_MBUS_DATA_ACTIVE_HIGH;
+	cfg->type = V4L2_MBUS_PARALLEL;
+	cfg->flags = soc_camera_apply_board_flags(icl, cfg);
+
+	return 0;
+}
+
 static struct v4l2_subdev_video_ops ov2640_subdev_video_ops = {
 	.s_stream	= ov2640_s_stream,
 	.g_mbus_fmt	= ov2640_g_fmt,
@@ -1091,6 +1015,7 @@ static struct v4l2_subdev_video_ops ov2640_subdev_video_ops = {
 	.cropcap	= ov2640_cropcap,
 	.g_crop		= ov2640_g_crop,
 	.enum_mbus_fmt	= ov2640_enum_fmt,
+	.g_mbus_config	= ov2640_g_mbus_config,
 };
 
 static struct v4l2_subdev_ops ov2640_subdev_ops = {
@@ -1104,18 +1029,11 @@ static struct v4l2_subdev_ops ov2640_subdev_ops = {
 static int ov2640_probe(struct i2c_client *client,
 			const struct i2c_device_id *did)
 {
-	struct ov2640_priv        *priv;
-	struct soc_camera_device  *icd = client->dev.platform_data;
-	struct i2c_adapter        *adapter = to_i2c_adapter(client->dev.parent);
-	struct soc_camera_link    *icl;
-	int                        ret;
-
-	if (!icd) {
-		dev_err(&adapter->dev, "OV2640: missing soc-camera data!\n");
-		return -EINVAL;
-	}
+	struct ov2640_priv	*priv;
+	struct soc_camera_link	*icl = soc_camera_i2c_to_link(client);
+	struct i2c_adapter	*adapter = to_i2c_adapter(client->dev.parent);
+	int			ret;
 
-	icl = to_soc_camera_link(icd);
 	if (!icl) {
 		dev_err(&adapter->dev,
 			"OV2640: Missing platform_data for driver\n");
@@ -1135,15 +1053,23 @@ static int ov2640_probe(struct i2c_client *client,
 		return -ENOMEM;
 	}
 
-	priv->info = icl->priv;
-
 	v4l2_i2c_subdev_init(&priv->subdev, client, &ov2640_subdev_ops);
+	v4l2_ctrl_handler_init(&priv->hdl, 2);
+	v4l2_ctrl_new_std(&priv->hdl, &ov2640_ctrl_ops,
+			V4L2_CID_VFLIP, 0, 1, 1, 0);
+	v4l2_ctrl_new_std(&priv->hdl, &ov2640_ctrl_ops,
+			V4L2_CID_HFLIP, 0, 1, 1, 0);
+	priv->subdev.ctrl_handler = &priv->hdl;
+	if (priv->hdl.error) {
+		int err = priv->hdl.error;
 
-	icd->ops = &ov2640_ops;
+		kfree(priv);
+		return err;
+	}
 
-	ret = ov2640_video_probe(icd, client);
+	ret = ov2640_video_probe(client);
 	if (ret) {
-		icd->ops = NULL;
+		v4l2_ctrl_handler_free(&priv->hdl);
 		kfree(priv);
 	} else {
 		dev_info(&adapter->dev, "OV2640 Probed\n");
@@ -1155,9 +1081,9 @@ static int ov2640_probe(struct i2c_client *client,
 static int ov2640_remove(struct i2c_client *client)
 {
 	struct ov2640_priv       *priv = to_ov2640(client);
-	struct soc_camera_device *icd = client->dev.platform_data;
 
-	icd->ops = NULL;
+	v4l2_device_unregister_subdev(&priv->subdev);
+	v4l2_ctrl_handler_free(&priv->hdl);
 	kfree(priv);
 	return 0;
 }