diff options
Diffstat (limited to 'drivers/media/video/ovcamchip/ov7x10.c')
-rw-r--r-- | drivers/media/video/ovcamchip/ov7x10.c | 334 |
1 files changed, 0 insertions, 334 deletions
diff --git a/drivers/media/video/ovcamchip/ov7x10.c b/drivers/media/video/ovcamchip/ov7x10.c deleted file mode 100644 index 5206e791392..00000000000 --- a/drivers/media/video/ovcamchip/ov7x10.c +++ /dev/null @@ -1,334 +0,0 @@ -/* OmniVision OV7610/OV7110 Camera Chip Support Code - * - * Copyright (c) 1999-2004 Mark McClelland <mark@alpha.dyndns.org> - * http://alpha.dyndns.org/ov511/ - * - * Color fixes by by Orion Sky Lawlor <olawlor@acm.org> (2/26/2000) - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. NO WARRANTY OF ANY KIND is expressed or implied. - */ - -#define DEBUG - -#include <linux/slab.h> -#include "ovcamchip_priv.h" - -/* Registers */ -#define REG_GAIN 0x00 /* gain [5:0] */ -#define REG_BLUE 0x01 /* blue channel balance */ -#define REG_RED 0x02 /* red channel balance */ -#define REG_SAT 0x03 /* saturation */ -#define REG_CNT 0x05 /* Y contrast */ -#define REG_BRT 0x06 /* Y brightness */ -#define REG_BLUE_BIAS 0x0C /* blue channel bias [5:0] */ -#define REG_RED_BIAS 0x0D /* red channel bias [5:0] */ -#define REG_GAMMA_COEFF 0x0E /* gamma settings */ -#define REG_WB_RANGE 0x0F /* AEC/ALC/S-AWB settings */ -#define REG_EXP 0x10 /* manual exposure setting */ -#define REG_CLOCK 0x11 /* polarity/clock prescaler */ -#define REG_FIELD_DIVIDE 0x16 /* field interval/mode settings */ -#define REG_HWIN_START 0x17 /* horizontal window start */ -#define REG_HWIN_END 0x18 /* horizontal window end */ -#define REG_VWIN_START 0x19 /* vertical window start */ -#define REG_VWIN_END 0x1A /* vertical window end */ -#define REG_PIXEL_SHIFT 0x1B /* pixel shift */ -#define REG_YOFFSET 0x21 /* Y channel offset */ -#define REG_UOFFSET 0x22 /* U channel offset */ -#define REG_ECW 0x24 /* exposure white level for AEC */ -#define REG_ECB 0x25 /* exposure black level for AEC */ -#define REG_FRAMERATE_H 0x2A /* frame rate MSB + misc */ -#define REG_FRAMERATE_L 0x2B /* frame rate LSB */ -#define REG_ALC 0x2C /* Auto Level Control settings */ -#define REG_VOFFSET 0x2E /* V channel offset adjustment */ -#define REG_ARRAY_BIAS 0x2F /* array bias -- don't change */ -#define REG_YGAMMA 0x33 /* misc gamma settings [7:6] */ -#define REG_BIAS_ADJUST 0x34 /* misc bias settings */ - -/* Window parameters */ -#define HWSBASE 0x38 -#define HWEBASE 0x3a -#define VWSBASE 0x05 -#define VWEBASE 0x05 - -struct ov7x10 { - int auto_brt; - int auto_exp; - int bandfilt; - int mirror; -}; - -/* Lawrence Glaister <lg@jfm.bc.ca> reports: - * - * Register 0x0f in the 7610 has the following effects: - * - * 0x85 (AEC method 1): Best overall, good contrast range - * 0x45 (AEC method 2): Very overexposed - * 0xa5 (spec sheet default): Ok, but the black level is - * shifted resulting in loss of contrast - * 0x05 (old driver setting): very overexposed, too much - * contrast - */ -static struct ovcamchip_regvals regvals_init_7x10[] = { - { 0x10, 0xff }, - { 0x16, 0x03 }, - { 0x28, 0x24 }, - { 0x2b, 0xac }, - { 0x12, 0x00 }, - { 0x38, 0x81 }, - { 0x28, 0x24 }, /* 0c */ - { 0x0f, 0x85 }, /* lg's setting */ - { 0x15, 0x01 }, - { 0x20, 0x1c }, - { 0x23, 0x2a }, - { 0x24, 0x10 }, - { 0x25, 0x8a }, - { 0x26, 0xa2 }, - { 0x27, 0xc2 }, - { 0x2a, 0x04 }, - { 0x2c, 0xfe }, - { 0x2d, 0x93 }, - { 0x30, 0x71 }, - { 0x31, 0x60 }, - { 0x32, 0x26 }, - { 0x33, 0x20 }, - { 0x34, 0x48 }, - { 0x12, 0x24 }, - { 0x11, 0x01 }, - { 0x0c, 0x24 }, - { 0x0d, 0x24 }, - { 0xff, 0xff }, /* END MARKER */ -}; - -/* This initializes the OV7x10 camera chip and relevant variables. */ -static int ov7x10_init(struct i2c_client *c) -{ - struct ovcamchip *ov = i2c_get_clientdata(c); - struct ov7x10 *s; - int rc; - - DDEBUG(4, &c->dev, "entered"); - - rc = ov_write_regvals(c, regvals_init_7x10); - if (rc < 0) - return rc; - - ov->spriv = s = kzalloc(sizeof *s, GFP_KERNEL); - if (!s) - return -ENOMEM; - - s->auto_brt = 1; - s->auto_exp = 1; - - return rc; -} - -static int ov7x10_free(struct i2c_client *c) -{ - struct ovcamchip *ov = i2c_get_clientdata(c); - - kfree(ov->spriv); - return 0; -} - -static int ov7x10_set_control(struct i2c_client *c, - struct ovcamchip_control *ctl) -{ - struct ovcamchip *ov = i2c_get_clientdata(c); - struct ov7x10 *s = ov->spriv; - int rc; - int v = ctl->value; - - switch (ctl->id) { - case OVCAMCHIP_CID_CONT: - rc = ov_write(c, REG_CNT, v >> 8); - break; - case OVCAMCHIP_CID_BRIGHT: - rc = ov_write(c, REG_BRT, v >> 8); - break; - case OVCAMCHIP_CID_SAT: - rc = ov_write(c, REG_SAT, v >> 8); - break; - case OVCAMCHIP_CID_HUE: - rc = ov_write(c, REG_RED, 0xFF - (v >> 8)); - if (rc < 0) - goto out; - - rc = ov_write(c, REG_BLUE, v >> 8); - break; - case OVCAMCHIP_CID_EXP: - rc = ov_write(c, REG_EXP, v); - break; - case OVCAMCHIP_CID_FREQ: - { - int sixty = (v == 60); - - rc = ov_write_mask(c, 0x2a, sixty?0x00:0x80, 0x80); - if (rc < 0) - goto out; - - rc = ov_write(c, 0x2b, sixty?0x00:0xac); - if (rc < 0) - goto out; - - rc = ov_write_mask(c, 0x13, 0x10, 0x10); - if (rc < 0) - goto out; - - rc = ov_write_mask(c, 0x13, 0x00, 0x10); - break; - } - case OVCAMCHIP_CID_BANDFILT: - rc = ov_write_mask(c, 0x2d, v?0x04:0x00, 0x04); - s->bandfilt = v; - break; - case OVCAMCHIP_CID_AUTOBRIGHT: - rc = ov_write_mask(c, 0x2d, v?0x10:0x00, 0x10); - s->auto_brt = v; - break; - case OVCAMCHIP_CID_AUTOEXP: - rc = ov_write_mask(c, 0x29, v?0x00:0x80, 0x80); - s->auto_exp = v; - break; - case OVCAMCHIP_CID_MIRROR: - rc = ov_write_mask(c, 0x12, v?0x40:0x00, 0x40); - s->mirror = v; - break; - default: - DDEBUG(2, &c->dev, "control not supported: %d", ctl->id); - return -EPERM; - } - -out: - DDEBUG(3, &c->dev, "id=%d, arg=%d, rc=%d", ctl->id, v, rc); - return rc; -} - -static int ov7x10_get_control(struct i2c_client *c, - struct ovcamchip_control *ctl) -{ - struct ovcamchip *ov = i2c_get_clientdata(c); - struct ov7x10 *s = ov->spriv; - int rc = 0; - unsigned char val = 0; - - switch (ctl->id) { - case OVCAMCHIP_CID_CONT: - rc = ov_read(c, REG_CNT, &val); - ctl->value = val << 8; - break; - case OVCAMCHIP_CID_BRIGHT: - rc = ov_read(c, REG_BRT, &val); - ctl->value = val << 8; - break; - case OVCAMCHIP_CID_SAT: - rc = ov_read(c, REG_SAT, &val); - ctl->value = val << 8; - break; - case OVCAMCHIP_CID_HUE: - rc = ov_read(c, REG_BLUE, &val); - ctl->value = val << 8; - break; - case OVCAMCHIP_CID_EXP: - rc = ov_read(c, REG_EXP, &val); - ctl->value = val; - break; - case OVCAMCHIP_CID_BANDFILT: - ctl->value = s->bandfilt; - break; - case OVCAMCHIP_CID_AUTOBRIGHT: - ctl->value = s->auto_brt; - break; - case OVCAMCHIP_CID_AUTOEXP: - ctl->value = s->auto_exp; - break; - case OVCAMCHIP_CID_MIRROR: - ctl->value = s->mirror; - break; - default: - DDEBUG(2, &c->dev, "control not supported: %d", ctl->id); - return -EPERM; - } - - DDEBUG(3, &c->dev, "id=%d, arg=%d, rc=%d", ctl->id, ctl->value, rc); - return rc; -} - -static int ov7x10_mode_init(struct i2c_client *c, struct ovcamchip_window *win) -{ - int qvga = win->quarter; - - /******** QVGA-specific regs ********/ - - ov_write(c, 0x14, qvga?0x24:0x04); - - /******** Palette-specific regs ********/ - - if (win->format == VIDEO_PALETTE_GREY) { - ov_write_mask(c, 0x0e, 0x40, 0x40); - ov_write_mask(c, 0x13, 0x20, 0x20); - } else { - ov_write_mask(c, 0x0e, 0x00, 0x40); - ov_write_mask(c, 0x13, 0x00, 0x20); - } - - /******** Clock programming ********/ - - ov_write(c, 0x11, win->clockdiv); - - /******** Resolution-specific ********/ - - if (win->width == 640 && win->height == 480) - ov_write(c, 0x35, 0x9e); - else - ov_write(c, 0x35, 0x1e); - - return 0; -} - -static int ov7x10_set_window(struct i2c_client *c, struct ovcamchip_window *win) -{ - int ret, hwscale, vwscale; - - ret = ov7x10_mode_init(c, win); - if (ret < 0) - return ret; - - if (win->quarter) { - hwscale = 1; - vwscale = 0; - } else { - hwscale = 2; - vwscale = 1; - } - - ov_write(c, 0x17, HWSBASE + (win->x >> hwscale)); - ov_write(c, 0x18, HWEBASE + ((win->x + win->width) >> hwscale)); - ov_write(c, 0x19, VWSBASE + (win->y >> vwscale)); - ov_write(c, 0x1a, VWEBASE + ((win->y + win->height) >> vwscale)); - - return 0; -} - -static int ov7x10_command(struct i2c_client *c, unsigned int cmd, void *arg) -{ - switch (cmd) { - case OVCAMCHIP_CMD_S_CTRL: - return ov7x10_set_control(c, arg); - case OVCAMCHIP_CMD_G_CTRL: - return ov7x10_get_control(c, arg); - case OVCAMCHIP_CMD_S_MODE: - return ov7x10_set_window(c, arg); - default: - DDEBUG(2, &c->dev, "command not supported: %d", cmd); - return -ENOIOCTLCMD; - } -} - -struct ovcamchip_ops ov7x10_ops = { - .init = ov7x10_init, - .free = ov7x10_free, - .command = ov7x10_command, -}; |