diff options
Diffstat (limited to 'drivers/media/video')
73 files changed, 11502 insertions, 3289 deletions
diff --git a/drivers/media/video/Kconfig b/drivers/media/video/Kconfig index fbe5b6168cc..29a11c1db1b 100644 --- a/drivers/media/video/Kconfig +++ b/drivers/media/video/Kconfig @@ -24,7 +24,7 @@ config VIDEO_HELPER_CHIPS_AUTO decode audio/video standards. This option will autoselect all pertinent modules to each selected video module. - Unselect this only if you know exaclty what you are doing, since + Unselect this only if you know exactly what you are doing, since it may break support on some boards. In doubt, say Y. @@ -184,9 +184,17 @@ config VIDEO_KS0127 To compile this driver as a module, choose M here: the module will be called ks0127. +config VIDEO_OV7670 + tristate "OmniVision OV7670 sensor support" + depends on I2C && VIDEO_V4L2 + ---help--- + This is a Video4Linux2 sensor-level driver for the OmniVision + OV7670 VGA camera. It currently only works with the M88ALP01 + controller. + config VIDEO_SAA7110 tristate "Philips SAA7110 video decoder" - depends on VIDEO_V4L1 + depends on VIDEO_V4L1 && I2C ---help--- Support for the Philips SAA7110 video decoders. @@ -567,18 +575,6 @@ config VIDEO_ZORAN_AVS6EYES help Support for the AverMedia 6 Eyes video surveillance card. -config VIDEO_ZR36120 - tristate "Zoran ZR36120/36125 Video For Linux" - depends on PCI && I2C && VIDEO_V4L1 && BROKEN - help - Support for ZR36120/ZR36125 based frame grabber/overlay boards. - This includes the Victor II, WaveWatcher, Video Wonder, Maxi-TV, - and Buster boards. Please read the material in - <file:Documentation/video4linux/zr36120.txt> for more information. - - To compile this driver as a module, choose M here: the - module will be called zr36120. - config VIDEO_MEYE tristate "Sony Vaio Picturebook Motion Eye Video For Linux" depends on PCI && SONYPI && VIDEO_V4L1 @@ -670,6 +666,15 @@ config VIDEO_M32R_AR_M64278 To compile this driver as a module, choose M here: the module will be called arv. +config VIDEO_CAFE_CCIC + tristate "Marvell 88ALP01 (Cafe) CMOS Camera Controller support" + depends on I2C && VIDEO_V4L2 + select VIDEO_OV7670 + ---help--- + This is a video4linux2 driver for the Marvell 88ALP01 integrated + CMOS camera controller. This is the controller found on first- + generation OLPC systems. + # # USB Multimedia device configuration # @@ -681,6 +686,8 @@ source "drivers/media/video/pvrusb2/Kconfig" source "drivers/media/video/em28xx/Kconfig" +source "drivers/media/video/usbvision/Kconfig" + source "drivers/media/video/usbvideo/Kconfig" source "drivers/media/video/et61x251/Kconfig" diff --git a/drivers/media/video/Makefile b/drivers/media/video/Makefile index af57abce8a6..9b1f3f06bb7 100644 --- a/drivers/media/video/Makefile +++ b/drivers/media/video/Makefile @@ -2,7 +2,6 @@ # Makefile for the video capture/playback device drivers. # -zoran-objs := zr36120.o zr36120_i2c.o zr36120_mem.o zr36067-objs := zoran_procfs.o zoran_device.o \ zoran_driver.o zoran_card.o tuner-objs := tuner-core.o tuner-types.o tuner-simple.o \ @@ -23,7 +22,6 @@ obj-$(CONFIG_VIDEO_TDA7432) += tda7432.o obj-$(CONFIG_VIDEO_TDA9875) += tda9875.o obj-$(CONFIG_SOUND_TVMIXER) += tvmixer.o -obj-$(CONFIG_VIDEO_ZR36120) += zoran.o obj-$(CONFIG_VIDEO_SAA6588) += saa6588.o obj-$(CONFIG_VIDEO_SAA5246A) += saa5246a.o obj-$(CONFIG_VIDEO_SAA5249) += saa5249.o @@ -64,6 +62,7 @@ obj-$(CONFIG_VIDEO_MEYE) += meye.o obj-$(CONFIG_VIDEO_SAA7134) += ir-kbd-i2c.o saa7134/ obj-$(CONFIG_VIDEO_CX88) += cx88/ obj-$(CONFIG_VIDEO_EM28XX) += em28xx/ +obj-$(CONFIG_VIDEO_USBVISION) += usbvision/ obj-$(CONFIG_VIDEO_TVP5150) += tvp5150.o obj-$(CONFIG_VIDEO_PVRUSB2) += pvrusb2/ obj-$(CONFIG_VIDEO_MSP3400) += msp3400.o @@ -92,6 +91,9 @@ obj-$(CONFIG_VIDEO_UPD64031A) += upd64031a.o obj-$(CONFIG_VIDEO_UPD64083) += upd64083.o obj-$(CONFIG_VIDEO_CX2341X) += cx2341x.o +obj-$(CONFIG_VIDEO_CAFE_CCIC) += cafe_ccic.o +obj-$(CONFIG_VIDEO_OV7670) += ov7670.o + obj-$(CONFIG_USB_DABUSB) += dabusb.o obj-$(CONFIG_USB_OV511) += ov511.o obj-$(CONFIG_USB_SE401) += se401.o diff --git a/drivers/media/video/bt8xx/bttv-cards.c b/drivers/media/video/bt8xx/bttv-cards.c index a84903e0d81..21ebe8f1381 100644 --- a/drivers/media/video/bt8xx/bttv-cards.c +++ b/drivers/media/video/bt8xx/bttv-cards.c @@ -4001,7 +4001,7 @@ static void __devinit init_PXC200(struct bttv *btv) * - sleep 1ms * - write 0x0E * read from GPIO_DATA into buf (uint_32) - * - if ( buf>>18 & 0x01 ) || ( buf>>19 && 0x01 != 0 ) + * - if ( buf>>18 & 0x01 ) || ( buf>>19 & 0x01 != 0 ) * error. ERROR_CPLD_Check_Failed. */ /* ----------------------------------------------------------------------- */ diff --git a/drivers/media/video/bt8xx/bttv-driver.c b/drivers/media/video/bt8xx/bttv-driver.c index 6e1ddad9f0c..3c8e4742dcc 100644 --- a/drivers/media/video/bt8xx/bttv-driver.c +++ b/drivers/media/video/bt8xx/bttv-driver.c @@ -1793,7 +1793,7 @@ static int bttv_common_ioctls(struct bttv *btv, unsigned int cmd, void *arg) memset(i,0,sizeof(*i)); i->index = n; i->type = V4L2_INPUT_TYPE_CAMERA; - i->audioset = 0; + i->audioset = 1; if (i->index == bttv_tvcards[btv->c.type].tuner) { sprintf(i->name, "Television"); i->type = V4L2_INPUT_TYPE_TUNER; diff --git a/drivers/media/video/bt8xx/bttv-i2c.c b/drivers/media/video/bt8xx/bttv-i2c.c index 70de6c96e20..62b873076e0 100644 --- a/drivers/media/video/bt8xx/bttv-i2c.c +++ b/drivers/media/video/bt8xx/bttv-i2c.c @@ -479,11 +479,7 @@ int __devexit fini_bttv_i2c(struct bttv *btv) if (0 != btv->i2c_rc) return 0; - if (btv->use_i2c_hw) { - return i2c_del_adapter(&btv->c.i2c_adap); - } else { - return i2c_bit_del_bus(&btv->c.i2c_adap); - } + return i2c_del_adapter(&btv->c.i2c_adap); } /* diff --git a/drivers/media/video/bt8xx/bttv-input.c b/drivers/media/video/bt8xx/bttv-input.c index 933d6db09ac..cbc012f71f5 100644 --- a/drivers/media/video/bt8xx/bttv-input.c +++ b/drivers/media/video/bt8xx/bttv-input.c @@ -259,24 +259,59 @@ static void bttv_rc5_timer_keyup(unsigned long data) /* ---------------------------------------------------------------------- */ +static void bttv_ir_start(struct bttv *btv, struct bttv_ir *ir) +{ + if (ir->polling) { + init_timer(&ir->timer); + ir->timer.function = bttv_input_timer; + ir->timer.data = (unsigned long)btv; + ir->timer.expires = jiffies + HZ; + add_timer(&ir->timer); + } else if (ir->rc5_gpio) { + /* set timer_end for code completion */ + init_timer(&ir->timer_end); + ir->timer_end.function = bttv_rc5_timer_end; + ir->timer_end.data = (unsigned long)ir; + + init_timer(&ir->timer_keyup); + ir->timer_keyup.function = bttv_rc5_timer_keyup; + ir->timer_keyup.data = (unsigned long)ir; + } +} + +static void bttv_ir_stop(struct bttv *btv) +{ + if (btv->remote->polling) { + del_timer_sync(&btv->remote->timer); + flush_scheduled_work(); + } + + if (btv->remote->rc5_gpio) { + u32 gpio; + + del_timer_sync(&btv->remote->timer_end); + flush_scheduled_work(); + + gpio = bttv_gpio_read(&btv->c); + bttv_gpio_write(&btv->c, gpio & ~(1 << 4)); + } +} + int bttv_input_init(struct bttv *btv) { struct bttv_ir *ir; IR_KEYTAB_TYPE *ir_codes = NULL; struct input_dev *input_dev; int ir_type = IR_TYPE_OTHER; + int err = -ENOMEM; if (!btv->has_remote) return -ENODEV; ir = kzalloc(sizeof(*ir),GFP_KERNEL); input_dev = input_allocate_device(); - if (!ir || !input_dev) { - kfree(ir); - input_free_device(input_dev); - return -ENOMEM; - } - memset(ir,0,sizeof(*ir)); + if (!ir || !input_dev) + goto err_out_free; /* detect & configure */ switch (btv->c.type) { @@ -348,10 +383,9 @@ int bttv_input_init(struct bttv *btv) break; } if (NULL == ir_codes) { - dprintk(KERN_INFO "Ooops: IR config error [card=%d]\n",btv->c.type); - kfree(ir); - input_free_device(input_dev); - return -ENODEV; + dprintk(KERN_INFO "Ooops: IR config error [card=%d]\n", btv->c.type); + err = -ENODEV; + goto err_out_free; } if (ir->rc5_gpio) { @@ -389,32 +423,26 @@ int bttv_input_init(struct bttv *btv) input_dev->cdev.dev = &btv->c.pci->dev; btv->remote = ir; - if (ir->polling) { - init_timer(&ir->timer); - ir->timer.function = bttv_input_timer; - ir->timer.data = (unsigned long)btv; - ir->timer.expires = jiffies + HZ; - add_timer(&ir->timer); - } else if (ir->rc5_gpio) { - /* set timer_end for code completion */ - init_timer(&ir->timer_end); - ir->timer_end.function = bttv_rc5_timer_end; - ir->timer_end.data = (unsigned long)ir; - - init_timer(&ir->timer_keyup); - ir->timer_keyup.function = bttv_rc5_timer_keyup; - ir->timer_keyup.data = (unsigned long)ir; - } + bttv_ir_start(btv, ir); /* all done */ - input_register_device(btv->remote->dev); - printk(DEVNAME ": %s detected at %s\n",ir->name,ir->phys); + err = input_register_device(btv->remote->dev); + if (err) + goto err_out_stop; /* the remote isn't as bouncy as a keyboard */ ir->dev->rep[REP_DELAY] = repeat_delay; ir->dev->rep[REP_PERIOD] = repeat_period; return 0; + + err_out_stop: + bttv_ir_stop(btv); + btv->remote = NULL; + err_out_free: + input_free_device(input_dev); + kfree(ir); + return err; } void bttv_input_fini(struct bttv *btv) @@ -422,22 +450,7 @@ void bttv_input_fini(struct bttv *btv) if (btv->remote == NULL) return; - if (btv->remote->polling) { - del_timer_sync(&btv->remote->timer); - flush_scheduled_work(); - } - - - if (btv->remote->rc5_gpio) { - u32 gpio; - - del_timer_sync(&btv->remote->timer_end); - flush_scheduled_work(); - - gpio = bttv_gpio_read(&btv->c); - bttv_gpio_write(&btv->c, gpio & ~(1 << 4)); - } - + bttv_ir_stop(btv); input_unregister_device(btv->remote->dev); kfree(btv->remote); btv->remote = NULL; diff --git a/drivers/media/video/cafe_ccic-regs.h b/drivers/media/video/cafe_ccic-regs.h new file mode 100644 index 00000000000..b2c22a0d664 --- /dev/null +++ b/drivers/media/video/cafe_ccic-regs.h @@ -0,0 +1,160 @@ +/* + * Register definitions for the m88alp01 camera interface. Offsets in bytes + * as given in the spec. + * + * Copyright 2006 One Laptop Per Child Association, Inc. + * + * Written by Jonathan Corbet, corbet@lwn.net. + * + * This file may be distributed under the terms of the GNU General + * Public License, version 2. + */ +#define REG_Y0BAR 0x00 +#define REG_Y1BAR 0x04 +#define REG_Y2BAR 0x08 +/* ... */ + +#define REG_IMGPITCH 0x24 /* Image pitch register */ +#define IMGP_YP_SHFT 2 /* Y pitch params */ +#define IMGP_YP_MASK 0x00003ffc /* Y pitch field */ +#define IMGP_UVP_SHFT 18 /* UV pitch (planar) */ +#define IMGP_UVP_MASK 0x3ffc0000 +#define REG_IRQSTATRAW 0x28 /* RAW IRQ Status */ +#define IRQ_EOF0 0x00000001 /* End of frame 0 */ +#define IRQ_EOF1 0x00000002 /* End of frame 1 */ +#define IRQ_EOF2 0x00000004 /* End of frame 2 */ +#define IRQ_SOF0 0x00000008 /* Start of frame 0 */ +#define IRQ_SOF1 0x00000010 /* Start of frame 1 */ +#define IRQ_SOF2 0x00000020 /* Start of frame 2 */ +#define IRQ_OVERFLOW 0x00000040 /* FIFO overflow */ +#define IRQ_TWSIW 0x00010000 /* TWSI (smbus) write */ +#define IRQ_TWSIR 0x00020000 /* TWSI read */ +#define IRQ_TWSIE 0x00040000 /* TWSI error */ +#define TWSIIRQS (IRQ_TWSIW|IRQ_TWSIR|IRQ_TWSIE) +#define FRAMEIRQS (IRQ_EOF0|IRQ_EOF1|IRQ_EOF2|IRQ_SOF0|IRQ_SOF1|IRQ_SOF2) +#define ALLIRQS (TWSIIRQS|FRAMEIRQS|IRQ_OVERFLOW) +#define REG_IRQMASK 0x2c /* IRQ mask - same bits as IRQSTAT */ +#define REG_IRQSTAT 0x30 /* IRQ status / clear */ + +#define REG_IMGSIZE 0x34 /* Image size */ +#define IMGSZ_V_MASK 0x1fff0000 +#define IMGSZ_V_SHIFT 16 +#define IMGSZ_H_MASK 0x00003fff +#define REG_IMGOFFSET 0x38 /* IMage offset */ + +#define REG_CTRL0 0x3c /* Control 0 */ +#define C0_ENABLE 0x00000001 /* Makes the whole thing go */ + +/* Mask for all the format bits */ +#define C0_DF_MASK 0x00fffffc /* Bits 2-23 */ + +/* RGB ordering */ +#define C0_RGB4_RGBX 0x00000000 +#define C0_RGB4_XRGB 0x00000004 +#define C0_RGB4_BGRX 0x00000008 +#define C0_RGB4_XBGR 0x0000000c +#define C0_RGB5_RGGB 0x00000000 +#define C0_RGB5_GRBG 0x00000004 +#define C0_RGB5_GBRG 0x00000008 +#define C0_RGB5_BGGR 0x0000000c + +/* Spec has two fields for DIN and DOUT, but they must match, so + combine them here. */ +#define C0_DF_YUV 0x00000000 /* Data is YUV */ +#define C0_DF_RGB 0x000000a0 /* ... RGB */ +#define C0_DF_BAYER 0x00000140 /* ... Bayer */ +/* 8-8-8 must be missing from the below - ask */ +#define C0_RGBF_565 0x00000000 +#define C0_RGBF_444 0x00000800 +#define C0_RGB_BGR 0x00001000 /* Blue comes first */ +#define C0_YUV_PLANAR 0x00000000 /* YUV 422 planar format */ +#define C0_YUV_PACKED 0x00008000 /* YUV 422 packed */ +#define C0_YUV_420PL 0x0000a000 /* YUV 420 planar */ +/* Think that 420 packed must be 111 - ask */ +#define C0_YUVE_YUYV 0x00000000 /* Y1CbY0Cr */ +#define C0_YUVE_YVYU 0x00010000 /* Y1CrY0Cb */ +#define C0_YUVE_VYUY 0x00020000 /* CrY1CbY0 */ +#define C0_YUVE_UYVY 0x00030000 /* CbY1CrY0 */ +#define C0_YUVE_XYUV 0x00000000 /* 420: .YUV */ +#define C0_YUVE_XYVU 0x00010000 /* 420: .YVU */ +#define C0_YUVE_XUVY 0x00020000 /* 420: .UVY */ +#define C0_YUVE_XVUY 0x00030000 /* 420: .VUY */ +/* Bayer bits 18,19 if needed */ +#define C0_HPOL_LOW 0x01000000 /* HSYNC polarity active low */ +#define C0_VPOL_LOW 0x02000000 /* VSYNC polarity active low */ +#define C0_VCLK_LOW 0x04000000 /* VCLK on falling edge */ +#define C0_DOWNSCALE 0x08000000 /* Enable downscaler */ +#define C0_SIFM_MASK 0xc0000000 /* SIF mode bits */ +#define C0_SIF_HVSYNC 0x00000000 /* Use H/VSYNC */ +#define CO_SOF_NOSYNC 0x40000000 /* Use inband active signaling */ + + +#define REG_CTRL1 0x40 /* Control 1 */ +#define C1_444ALPHA 0x00f00000 /* Alpha field in RGB444 */ +#define C1_ALPHA_SHFT 20 +#define C1_DMAB32 0x00000000 /* 32-byte DMA burst */ +#define C1_DMAB16 0x02000000 /* 16-byte DMA burst */ +#define C1_DMAB64 0x04000000 /* 64-byte DMA burst */ +#define C1_DMAB_MASK 0x06000000 +#define C1_TWOBUFS 0x08000000 /* Use only two DMA buffers */ +#define C1_PWRDWN 0x10000000 /* Power down */ + +#define REG_CLKCTRL 0x88 /* Clock control */ +#define CLK_DIV_MASK 0x0000ffff /* Upper bits RW "reserved" */ + +#define REG_GPR 0xb4 /* General purpose register. This + controls inputs to the power and reset + pins on the OV7670 used with OLPC; + other deployments could differ. */ +#define GPR_C1EN 0x00000020 /* Pad 1 (power down) enable */ +#define GPR_C0EN 0x00000010 /* Pad 0 (reset) enable */ +#define GPR_C1 0x00000002 /* Control 1 value */ +/* + * Control 0 is wired to reset on OLPC machines. For ov7x sensors, + * it is active low, for 0v6x, instead, it's active high. What + * fun. + */ +#define GPR_C0 0x00000001 /* Control 0 value */ + +#define REG_TWSIC0 0xb8 /* TWSI (smbus) control 0 */ +#define TWSIC0_EN 0x00000001 /* TWSI enable */ +#define TWSIC0_MODE 0x00000002 /* 1 = 16-bit, 0 = 8-bit */ +#define TWSIC0_SID 0x000003fc /* Slave ID */ +#define TWSIC0_SID_SHIFT 2 +#define TWSIC0_CLKDIV 0x0007fc00 /* Clock divider */ +#define TWSIC0_MASKACK 0x00400000 /* Mask ack from sensor */ +#define TWSIC0_OVMAGIC 0x00800000 /* Make it work on OV sensors */ + +#define REG_TWSIC1 0xbc /* TWSI control 1 */ +#define TWSIC1_DATA 0x0000ffff /* Data to/from camchip */ +#define TWSIC1_ADDR 0x00ff0000 /* Address (register) */ +#define TWSIC1_ADDR_SHIFT 16 +#define TWSIC1_READ 0x01000000 /* Set for read op */ +#define TWSIC1_WSTAT 0x02000000 /* Write status */ +#define TWSIC1_RVALID 0x04000000 /* Read data valid */ +#define TWSIC1_ERROR 0x08000000 /* Something screwed up */ + + +#define REG_UBAR 0xc4 /* Upper base address register */ + +/* + * Here's the weird global control registers which are said to live + * way up here. + */ +#define REG_GL_CSR 0x3004 /* Control/status register */ +#define GCSR_SRS 0x00000001 /* SW Reset set */ +#define GCSR_SRC 0x00000002 /* SW Reset clear */ +#define GCSR_MRS 0x00000004 /* Master reset set */ +#define GCSR_MRC 0x00000008 /* HW Reset clear */ +#define GCSR_CCIC_EN 0x00004000 /* CCIC Clock enable */ +#define REG_GL_IMASK 0x300c /* Interrupt mask register */ +#define GIMSK_CCIC_EN 0x00000004 /* CCIC Interrupt enable */ + +#define REG_LEN REG_GL_IMASK + 4 + + +/* + * Useful stuff that probably belongs somewhere global. + */ +#define VGA_WIDTH 640 +#define VGA_HEIGHT 480 diff --git a/drivers/media/video/cafe_ccic.c b/drivers/media/video/cafe_ccic.c new file mode 100644 index 00000000000..e347c7ebc98 --- /dev/null +++ b/drivers/media/video/cafe_ccic.c @@ -0,0 +1,2228 @@ +/* + * A driver for the CMOS camera controller in the Marvell 88ALP01 "cafe" + * multifunction chip. Currently works with the Omnivision OV7670 + * sensor. + * + * Copyright 2006 One Laptop Per Child Association, Inc. + * + * Written by Jonathan Corbet, corbet@lwn.net. + * + * This file may be distributed under the terms of the GNU General + * Public License, version 2. + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/moduleparam.h> +#include <linux/init.h> +#include <linux/fs.h> +#include <linux/pci.h> +#include <linux/i2c.h> +#include <linux/interrupt.h> +#include <linux/spinlock.h> +#include <linux/videodev2.h> +#include <media/v4l2-common.h> +#include <linux/device.h> +#include <linux/wait.h> +#include <linux/list.h> +#include <linux/dma-mapping.h> +#include <linux/delay.h> +#include <linux/debugfs.h> +#include <linux/jiffies.h> +#include <linux/vmalloc.h> + +#include <asm/uaccess.h> +#include <asm/io.h> + +#include "cafe_ccic-regs.h" + +#define CAFE_VERSION 0x000001 + + +/* + * Parameters. + */ +MODULE_AUTHOR("Jonathan Corbet <corbet@lwn.net>"); +MODULE_DESCRIPTION("Marvell 88ALP01 CMOS Camera Controller driver"); +MODULE_LICENSE("GPL"); +MODULE_SUPPORTED_DEVICE("Video"); + +/* + * Internal DMA buffer management. Since the controller cannot do S/G I/O, + * we must have physically contiguous buffers to bring frames into. + * These parameters control how many buffers we use, whether we + * allocate them at load time (better chance of success, but nails down + * memory) or when somebody tries to use the camera (riskier), and, + * for load-time allocation, how big they should be. + * + * The controller can cycle through three buffers. We could use + * more by flipping pointers around, but it probably makes little + * sense. + */ + +#define MAX_DMA_BUFS 3 +static int alloc_bufs_at_load = 0; +module_param(alloc_bufs_at_load, bool, 0444); +MODULE_PARM_DESC(alloc_bufs_at_load, + "Non-zero value causes DMA buffers to be allocated at module " + "load time. This increases the chances of successfully getting " + "those buffers, but at the cost of nailing down the memory from " + "the outset."); + +static int n_dma_bufs = 3; +module_param(n_dma_bufs, uint, 0644); +MODULE_PARM_DESC(n_dma_bufs, + "The number of DMA buffers to allocate. Can be either two " + "(saves memory, makes timing tighter) or three."); + +static int dma_buf_size = VGA_WIDTH * VGA_HEIGHT * 2; /* Worst case */ +module_param(dma_buf_size, uint, 0444); +MODULE_PARM_DESC(dma_buf_size, + "The size of the allocated DMA buffers. If actual operating " + "parameters require larger buffers, an attempt to reallocate " + "will be made."); + +static int min_buffers = 1; +module_param(min_buffers, uint, 0644); +MODULE_PARM_DESC(min_buffers, + "The minimum number of streaming I/O buffers we are willing " + "to work with."); + +static int max_buffers = 10; +module_param(max_buffers, uint, 0644); +MODULE_PARM_DESC(max_buffers, + "The maximum number of streaming I/O buffers an application " + "will be allowed to allocate. These buffers are big and live " + "in vmalloc space."); + +static int flip = 0; +module_param(flip, bool, 0444); +MODULE_PARM_DESC(flip, + "If set, the sensor will be instructed to flip the image " + "vertically."); + + +enum cafe_state { + S_NOTREADY, /* Not yet initialized */ + S_IDLE, /* Just hanging around */ + S_FLAKED, /* Some sort of problem */ + S_SINGLEREAD, /* In read() */ + S_SPECREAD, /* Speculative read (for future read()) */ + S_STREAMING /* Streaming data */ +}; + +/* + * Tracking of streaming I/O buffers. + */ +struct cafe_sio_buffer { + struct list_head list; + struct v4l2_buffer v4lbuf; + char *buffer; /* Where it lives in kernel space */ + int mapcount; + struct cafe_camera *cam; +}; + +/* + * A description of one of our devices. + * Locking: controlled by s_mutex. Certain fields, however, require + * the dev_lock spinlock; they are marked as such by comments. + * dev_lock is also required for access to device registers. + */ +struct cafe_camera +{ + enum cafe_state state; + unsigned long flags; /* Buffer status, mainly (dev_lock) */ + int users; /* How many open FDs */ + struct file *owner; /* Who has data access (v4l2) */ + + /* + * Subsystem structures. + */ + struct pci_dev *pdev; + struct video_device v4ldev; + struct i2c_adapter i2c_adapter; + struct i2c_client *sensor; + + unsigned char __iomem *regs; + struct list_head dev_list; /* link to other devices */ + + /* DMA buffers */ + unsigned int nbufs; /* How many are alloc'd */ + int next_buf; /* Next to consume (dev_lock) */ + unsigned int dma_buf_size; /* allocated size */ + void *dma_bufs[MAX_DMA_BUFS]; /* Internal buffer addresses */ + dma_addr_t dma_handles[MAX_DMA_BUFS]; /* Buffer bus addresses */ + unsigned int specframes; /* Unconsumed spec frames (dev_lock) */ + unsigned int sequence; /* Frame sequence number */ + unsigned int buf_seq[MAX_DMA_BUFS]; /* Sequence for individual buffers */ + + /* Streaming buffers */ + unsigned int n_sbufs; /* How many we have */ + struct cafe_sio_buffer *sb_bufs; /* The array of housekeeping structs */ + struct list_head sb_avail; /* Available for data (we own) (dev_lock) */ + struct list_head sb_full; /* With data (user space owns) (dev_lock) */ + struct tasklet_struct s_tasklet; + + /* Current operating parameters */ + enum v4l2_chip_ident sensor_type; /* Currently ov7670 only */ + struct v4l2_pix_format pix_format; + + /* Locks */ + struct mutex s_mutex; /* Access to this structure */ + spinlock_t dev_lock; /* Access to device */ + + /* Misc */ + wait_queue_head_t smbus_wait; /* Waiting on i2c events */ + wait_queue_head_t iowait; /* Waiting on frame data */ +#ifdef CONFIG_VIDEO_ADV_DEBUG + struct dentry *dfs_regs; + struct dentry *dfs_cam_regs; +#endif +}; + +/* + * Status flags. Always manipulated with bit operations. + */ +#define CF_BUF0_VALID 0 /* Buffers valid - first three */ +#define CF_BUF1_VALID 1 +#define CF_BUF2_VALID 2 +#define CF_DMA_ACTIVE 3 /* A frame is incoming */ +#define CF_CONFIG_NEEDED 4 /* Must configure hardware */ + + + +/* + * Start over with DMA buffers - dev_lock needed. + */ +static void cafe_reset_buffers(struct cafe_camera *cam) +{ + int i; + + cam->next_buf = -1; + for (i = 0; i < cam->nbufs; i++) + clear_bit(i, &cam->flags); + cam->specframes = 0; +} + +static inline int cafe_needs_config(struct cafe_camera *cam) +{ + return test_bit(CF_CONFIG_NEEDED, &cam->flags); +} + +static void cafe_set_config_needed(struct cafe_camera *cam, int needed) +{ + if (needed) + set_bit(CF_CONFIG_NEEDED, &cam->flags); + else + clear_bit(CF_CONFIG_NEEDED, &cam->flags); +} + + + + +/* + * Debugging and related. + */ +#define cam_err(cam, fmt, arg...) \ + dev_err(&(cam)->pdev->dev, fmt, ##arg); +#define cam_warn(cam, fmt, arg...) \ + dev_warn(&(cam)->pdev->dev, fmt, ##arg); +#define cam_dbg(cam, fmt, arg...) \ + dev_dbg(&(cam)->pdev->dev, fmt, ##arg); + + +/* ---------------------------------------------------------------------*/ +/* + * We keep a simple list of known devices to search at open time. + */ +static LIST_HEAD(cafe_dev_list); +static DEFINE_MUTEX(cafe_dev_list_lock); + +static void cafe_add_dev(struct cafe_camera *cam) +{ + mutex_lock(&cafe_dev_list_lock); + list_add_tail(&cam->dev_list, &cafe_dev_list); + mutex_unlock(&cafe_dev_list_lock); +} + +static void cafe_remove_dev(struct cafe_camera *cam) +{ + mutex_lock(&cafe_dev_list_lock); + list_del(&cam->dev_list); + mutex_unlock(&cafe_dev_list_lock); +} + +static struct cafe_camera *cafe_find_dev(int minor) +{ + struct cafe_camera *cam; + + mutex_lock(&cafe_dev_list_lock); + list_for_each_entry(cam, &cafe_dev_list, dev_list) { + if (cam->v4ldev.minor == minor) + goto done; + } + cam = NULL; + done: + mutex_unlock(&cafe_dev_list_lock); + return cam; +} + + +static struct cafe_camera *cafe_find_by_pdev(struct pci_dev *pdev) +{ + struct cafe_camera *cam; + + mutex_lock(&cafe_dev_list_lock); + list_for_each_entry(cam, &cafe_dev_list, dev_list) { + if (cam->pdev == pdev) + goto done; + } + cam = NULL; + done: + mutex_unlock(&cafe_dev_list_lock); + return cam; +} + + +/* ------------------------------------------------------------------------ */ +/* + * Device register I/O + */ +static inline void cafe_reg_write(struct cafe_camera *cam, unsigned int reg, + unsigned int val) +{ + iowrite32(val, cam->regs + reg); +} + +static inline unsigned int cafe_reg_read(struct cafe_camera *cam, + unsigned int reg) +{ + return ioread32(cam->regs + reg); +} + + +static inline void cafe_reg_write_mask(struct cafe_camera *cam, unsigned int reg, + unsigned int val, unsigned int mask) +{ + unsigned int v = cafe_reg_read(cam, reg); + + v = (v & ~mask) | (val & mask); + cafe_reg_write(cam, reg, v); +} + +static inline void cafe_reg_clear_bit(struct cafe_camera *cam, + unsigned int reg, unsigned int val) +{ + cafe_reg_write_mask(cam, reg, 0, val); +} + +static inline void cafe_reg_set_bit(struct cafe_camera *cam, + unsigned int reg, unsigned int val) +{ + cafe_reg_write_mask(cam, reg, val, val); +} + + + +/* -------------------------------------------------------------------- */ +/* + * The I2C/SMBUS interface to the camera itself starts here. The + * controller handles SMBUS itself, presenting a relatively simple register + * interface; all we have to do is to tell it where to route the data. + */ +#define CAFE_SMBUS_TIMEOUT (HZ) /* generous */ + +static int cafe_smbus_write_done(struct cafe_camera *cam) +{ + unsigned long flags; + int c1; + + /* + * We must delay after the interrupt, or the controller gets confused + * and never does give us good status. Fortunately, we don't do this + * often. + */ + udelay(20); + spin_lock_irqsave(&cam->dev_lock, flags); + c1 = cafe_reg_read(cam, REG_TWSIC1); + spin_unlock_irqrestore(&cam->dev_lock, flags); + return (c1 & (TWSIC1_WSTAT|TWSIC1_ERROR)) != TWSIC1_WSTAT; +} + +static int cafe_smbus_write_data(struct cafe_camera *cam, + u16 addr, u8 command, u8 value) +{ + unsigned int rval; + unsigned long flags; + + spin_lock_irqsave(&cam->dev_lock, flags); + rval = TWSIC0_EN | ((addr << TWSIC0_SID_SHIFT) & TWSIC0_SID); + rval |= TWSIC0_OVMAGIC; /* Make OV sensors work */ + /* + * Marvell sez set clkdiv to all 1's for now. + */ + rval |= TWSIC0_CLKDIV; + cafe_reg_write(cam, REG_TWSIC0, rval); + (void) cafe_reg_read(cam, REG_TWSIC1); /* force write */ + rval = value | ((command << TWSIC1_ADDR_SHIFT) & TWSIC1_ADDR); + cafe_reg_write(cam, REG_TWSIC1, rval); + spin_unlock_irqrestore(&cam->dev_lock, flags); + msleep(2); /* Required or things flake */ + + wait_event_timeout(cam->smbus_wait, cafe_smbus_write_done(cam), + CAFE_SMBUS_TIMEOUT); + spin_lock_irqsave(&cam->dev_lock, flags); + rval = cafe_reg_read(cam, REG_TWSIC1); + spin_unlock_irqrestore(&cam->dev_lock, flags); + + if (rval & TWSIC1_WSTAT) { + cam_err(cam, "SMBUS write (%02x/%02x/%02x) timed out\n", addr, + command, value); + return -EIO; + } + if (rval & TWSIC1_ERROR) { + cam_err(cam, "SMBUS write (%02x/%02x/%02x) error\n", addr, + command, value); + return -EIO; + } + return 0; +} + + + +static int cafe_smbus_read_done(struct cafe_camera *cam) +{ + unsigned long flags; + int c1; + + /* + * We must delay after the interrupt, or the controller gets confused + * and never does give us good status. Fortunately, we don't do this + * often. + */ + udelay(20); + spin_lock_irqsave(&cam->dev_lock, flags); + c1 = cafe_reg_read(cam, REG_TWSIC1); + spin_unlock_irqrestore(&cam->dev_lock, flags); + return c1 & (TWSIC1_RVALID|TWSIC1_ERROR); +} + + + +static int cafe_smbus_read_data(struct cafe_camera *cam, + u16 addr, u8 command, u8 *value) +{ + unsigned int rval; + unsigned long flags; + + spin_lock_irqsave(&cam->dev_lock, flags); + rval = TWSIC0_EN | ((addr << TWSIC0_SID_SHIFT) & TWSIC0_SID); + rval |= TWSIC0_OVMAGIC; /* Make OV sensors work */ + /* + * Marvel sez set clkdiv to all 1's for now. + */ + rval |= TWSIC0_CLKDIV; + cafe_reg_write(cam, REG_TWSIC0, rval); + (void) cafe_reg_read(cam, REG_TWSIC1); /* force write */ + rval = TWSIC1_READ | ((command << TWSIC1_ADDR_SHIFT) & TWSIC1_ADDR); + cafe_reg_write(cam, REG_TWSIC1, rval); + spin_unlock_irqrestore(&cam->dev_lock, flags); + + wait_event_timeout(cam->smbus_wait, + cafe_smbus_read_done(cam), CAFE_SMBUS_TIMEOUT); + spin_lock_irqsave(&cam->dev_lock, flags); + rval = cafe_reg_read(cam, REG_TWSIC1); + spin_unlock_irqrestore(&cam->dev_lock, flags); + + if (rval & TWSIC1_ERROR) { + cam_err(cam, "SMBUS read (%02x/%02x) error\n", addr, command); + return -EIO; + } + if (! (rval & TWSIC1_RVALID)) { + cam_err(cam, "SMBUS read (%02x/%02x) timed out\n", addr, + command); + return -EIO; + } + *value = rval & 0xff; + return 0; +} + +/* + * Perform a transfer over SMBUS. This thing is called under + * the i2c bus lock, so we shouldn't race with ourselves... + */ +static int cafe_smbus_xfer(struct i2c_adapter *adapter, u16 addr, + unsigned short flags, char rw, u8 command, + int size, union i2c_smbus_data *data) +{ + struct cafe_camera *cam = i2c_get_adapdata(adapter); + int ret = -EINVAL; + + /* + * Refuse to talk to anything but OV cam chips. We should + * never even see an attempt to do so, but one never knows. + */ + if (cam->sensor && addr != cam->sensor->addr) { + cam_err(cam, "funky smbus addr %d\n", addr); + return -EINVAL; + } + /* + * This interface would appear to only do byte data ops. OK + * it can do word too, but the cam chip has no use for that. + */ + if (size != I2C_SMBUS_BYTE_DATA) { + cam_err(cam, "funky xfer size %d\n", size); + return -EINVAL; + } + + if (rw == I2C_SMBUS_WRITE) + ret = cafe_smbus_write_data(cam, addr, command, data->byte); + else if (rw == I2C_SMBUS_READ) + ret = cafe_smbus_read_data(cam, addr, command, &data->byte); + return ret; +} + + +static void cafe_smbus_enable_irq(struct cafe_camera *cam) +{ + unsigned long flags; + + spin_lock_irqsave(&cam->dev_lock, flags); + cafe_reg_set_bit(cam, REG_IRQMASK, TWSIIRQS); + spin_unlock_irqrestore(&cam->dev_lock, flags); +} + +static u32 cafe_smbus_func(struct i2c_adapter *adapter) +{ + return I2C_FUNC_SMBUS_READ_BYTE_DATA | + I2C_FUNC_SMBUS_WRITE_BYTE_DATA; +} + +static struct i2c_algorithm cafe_smbus_algo = { + .smbus_xfer = cafe_smbus_xfer, + .functionality = cafe_smbus_func +}; + +/* Somebody is on the bus */ +static int cafe_cam_init(struct cafe_camera *cam); +static void cafe_ctlr_stop_dma(struct cafe_camera *cam); +static void cafe_ctlr_power_down(struct cafe_camera *cam); + +static int cafe_smbus_attach(struct i2c_client *client) +{ + struct cafe_camera *cam = i2c_get_adapdata(client->adapter); + + /* + * Don't talk to chips we don't recognize. + */ + if (client->driver->id == I2C_DRIVERID_OV7670) { + cam->sensor = client; + return cafe_cam_init(cam); + } + return -EINVAL; +} + +static int cafe_smbus_detach(struct i2c_client *client) +{ + struct cafe_camera *cam = i2c_get_adapdata(client->adapter); + + if (cam->sensor == client) { + cafe_ctlr_stop_dma(cam); + cafe_ctlr_power_down(cam); + cam_err(cam, "lost the sensor!\n"); + cam->sensor = NULL; /* Bummer, no camera */ + cam->state = S_NOTREADY; + } + return 0; +} + +static int cafe_smbus_setup(struct cafe_camera *cam) +{ + struct i2c_adapter *adap = &cam->i2c_adapter; + int ret; + + cafe_smbus_enable_irq(cam); + adap->id = I2C_HW_SMBUS_CAFE; + adap->class = I2C_CLASS_CAM_DIGITAL; + adap->owner = THIS_MODULE; + adap->client_register = cafe_smbus_attach; + adap->client_unregister = cafe_smbus_detach; + adap->algo = &cafe_smbus_algo; + strcpy(adap->name, "cafe_ccic"); + i2c_set_adapdata(adap, cam); + ret = i2c_add_adapter(adap); + if (ret) + printk(KERN_ERR "Unable to register cafe i2c adapter\n"); + return ret; +} + +static void cafe_smbus_shutdown(struct cafe_camera *cam) +{ + i2c_del_adapter(&cam->i2c_adapter); +} + + +/* ------------------------------------------------------------------- */ +/* + * Deal with the controller. + */ + +/* + * Do everything we think we need to have the interface operating + * according to the desired format. + */ +static void cafe_ctlr_dma(struct cafe_camera *cam) +{ + /* + * Store the first two Y buffers (we aren't supporting + * planar formats for now, so no UV bufs). Then either + * set the third if it exists, or tell the controller + * to just use two. + */ + cafe_reg_write(cam, REG_Y0BAR, cam->dma_handles[0]); + cafe_reg_write(cam, REG_Y1BAR, cam->dma_handles[1]); + if (cam->nbufs > 2) { + cafe_reg_write(cam, REG_Y2BAR, cam->dma_handles[2]); + cafe_reg_clear_bit(cam, REG_CTRL1, C1_TWOBUFS); + } + else + cafe_reg_set_bit(cam, REG_CTRL1, C1_TWOBUFS); + cafe_reg_write(cam, REG_UBAR, 0); /* 32 bits only for now */ +} + +static void cafe_ctlr_image(struct cafe_camera *cam) +{ + int imgsz; + struct v4l2_pix_format *fmt = &cam->pix_format; + + imgsz = ((fmt->height << IMGSZ_V_SHIFT) & IMGSZ_V_MASK) | + (fmt->bytesperline & IMGSZ_H_MASK); + cafe_reg_write(cam, REG_IMGSIZE, imgsz); + cafe_reg_write(cam, REG_IMGOFFSET, 0); + /* YPITCH just drops the last two bits */ + cafe_reg_write_mask(cam, REG_IMGPITCH, fmt->bytesperline, + IMGP_YP_MASK); + /* + * Tell the controller about the image format we are using. + */ + switch (cam->pix_format.pixelformat) { + case V4L2_PIX_FMT_YUYV: + cafe_reg_write_mask(cam, REG_CTRL0, + C0_DF_YUV|C0_YUV_PACKED|C0_YUVE_YUYV, + C0_DF_MASK); + break; + + case V4L2_PIX_FMT_RGB444: + cafe_reg_write_mask(cam, REG_CTRL0, + C0_DF_RGB|C0_RGBF_444|C0_RGB4_XRGB, + C0_DF_MASK); + /* Alpha value? */ + break; + + case V4L2_PIX_FMT_RGB565: + cafe_reg_write_mask(cam, REG_CTRL0, + C0_DF_RGB|C0_RGBF_565|C0_RGB5_BGGR, + C0_DF_MASK); + break; + + default: + cam_err(cam, "Unknown format %x\n", cam->pix_format.pixelformat); + break; + } + /* + * Make sure it knows we want to use hsync/vsync. + */ + cafe_reg_write_mask(cam, REG_CTRL0, C0_SIF_HVSYNC, + C0_SIFM_MASK); +} + + +/* + * Configure the controller for operation; caller holds the + * device mutex. + */ +static int cafe_ctlr_configure(struct cafe_camera *cam) +{ + unsigned long flags; + + spin_lock_irqsave(&cam->dev_lock, flags); + cafe_ctlr_dma(cam); + cafe_ctlr_image(cam); + cafe_set_config_needed(cam, 0); + spin_unlock_irqrestore(&cam->dev_lock, flags); + return 0; +} + +static void cafe_ctlr_irq_enable(struct cafe_camera *cam) +{ + /* + * Clear any pending interrupts, since we do not + * expect to have I/O active prior to enabling. + */ + cafe_reg_write(cam, REG_IRQSTAT, FRAMEIRQS); + cafe_reg_set_bit(cam, REG_IRQMASK, FRAMEIRQS); +} + +static void cafe_ctlr_irq_disable(struct cafe_camera *cam) +{ + cafe_reg_clear_bit(cam, REG_IRQMASK, FRAMEIRQS); +} + +/* + * Make the controller start grabbing images. Everything must + * be set up before doing this. + */ +static void cafe_ctlr_start(struct cafe_camera *cam) +{ + /* set_bit performs a read, so no other barrier should be + needed here */ + cafe_reg_set_bit(cam, REG_CTRL0, C0_ENABLE); +} + +static void cafe_ctlr_stop(struct cafe_camera *cam) +{ + cafe_reg_clear_bit(cam, REG_CTRL0, C0_ENABLE); +} + +static void cafe_ctlr_init(struct cafe_camera *cam) +{ + unsigned long flags; + + spin_lock_irqsave(&cam->dev_lock, flags); + /* + * Added magic to bring up the hardware on the B-Test board + */ + cafe_reg_write(cam, 0x3038, 0x8); + cafe_reg_write(cam, 0x315c, 0x80008); + /* + * Go through the dance needed to wake the device up. + * Note that these registers are global and shared + * with the NAND and SD devices. Interaction between the + * three still needs to be examined. + */ + cafe_reg_write(cam, REG_GL_CSR, GCSR_SRS|GCSR_MRS); /* Needed? */ + cafe_reg_write(cam, REG_GL_CSR, GCSR_SRC|GCSR_MRC); + cafe_reg_write(cam, REG_GL_CSR, GCSR_SRC|GCSR_MRS); + mdelay(5); /* FIXME revisit this */ + cafe_reg_write(cam, REG_GL_CSR, GCSR_CCIC_EN|GCSR_SRC|GCSR_MRC); + cafe_reg_set_bit(cam, REG_GL_IMASK, GIMSK_CCIC_EN); + /* + * Make sure it's not powered down. + */ + cafe_reg_clear_bit(cam, REG_CTRL1, C1_PWRDWN); + /* + * Turn off the enable bit. It sure should be off anyway, + * but it's good to be sure. + */ + cafe_reg_clear_bit(cam, REG_CTRL0, C0_ENABLE); + /* + * Mask all interrupts. + */ + cafe_reg_write(cam, REG_IRQMASK, 0); + /* + * Clock the sensor appropriately. Controller clock should + * be 48MHz, sensor "typical" value is half that. + */ + cafe_reg_write_mask(cam, REG_CLKCTRL, 2, CLK_DIV_MASK); + spin_unlock_irqrestore(&cam->dev_lock, flags); +} + + +/* + * Stop the controller, and don't return until we're really sure that no + * further DMA is going on. + */ +static void cafe_ctlr_stop_dma(struct cafe_camera *cam) +{ + unsigned long flags; + + /* + * Theory: stop the camera controller (whether it is operating + * or not). Delay briefly just in case we race with the SOF + * interrupt, then wait until no DMA is active. + */ + spin_lock_irqsave(&cam->dev_lock, flags); + cafe_ctlr_stop(cam); + spin_unlock_irqrestore(&cam->dev_lock, flags); + mdelay(1); + wait_event_timeout(cam->iowait, + !test_bit(CF_DMA_ACTIVE, &cam->flags), HZ); + if (test_bit(CF_DMA_ACTIVE, &cam->flags)) + cam_err(cam, "Timeout waiting for DMA to end\n"); + /* This would be bad news - what now? */ + spin_lock_irqsave(&cam->dev_lock, flags); + cam->state = S_IDLE; + cafe_ctlr_irq_disable(cam); + spin_unlock_irqrestore(&cam->dev_lock, flags); +} + +/* + * Power up and down. + */ +static void cafe_ctlr_power_up(struct cafe_camera *cam) +{ + unsigned long flags; + + spin_lock_irqsave(&cam->dev_lock, flags); + cafe_reg_clear_bit(cam, REG_CTRL1, C1_PWRDWN); + /* + * Put the sensor into operational mode (assumes OLPC-style + * wiring). Control 0 is reset - set to 1 to operate. + * Control 1 is power down, set to 0 to operate. + */ + cafe_reg_write(cam, REG_GPR, GPR_C1EN|GPR_C0EN); /* pwr up, reset */ + mdelay(1); /* Marvell says 1ms will do it */ + cafe_reg_write(cam, REG_GPR, GPR_C1EN|GPR_C0EN|GPR_C0); + mdelay(1); /* Enough? */ + spin_unlock_irqrestore(&cam->dev_lock, flags); +} + +static void cafe_ctlr_power_down(struct cafe_camera *cam) +{ + unsigned long flags; + + spin_lock_irqsave(&cam->dev_lock, flags); + cafe_reg_write(cam, REG_GPR, GPR_C1EN|GPR_C0EN|GPR_C1); + cafe_reg_set_bit(cam, REG_CTRL1, C1_PWRDWN); + spin_unlock_irqrestore(&cam->dev_lock, flags); +} + +/* -------------------------------------------------------------------- */ +/* + * Communications with the sensor. + */ + +static int __cafe_cam_cmd(struct cafe_camera *cam, int cmd, void *arg) +{ + struct i2c_client *sc = cam->sensor; + int ret; + + if (sc == NULL || sc->driver == NULL || sc->driver->command == NULL) + return -EINVAL; + ret = sc->driver->command(sc, cmd, arg); + if (ret == -EPERM) /* Unsupported command */ + return 0; + return ret; +} + +static int __cafe_cam_reset(struct cafe_camera *cam) +{ + int zero = 0; + return __cafe_cam_cmd(cam, VIDIOC_INT_RESET, &zero); +} + +/* + * We have found the sensor on the i2c. Let's try to have a + * conversation. + */ +static int cafe_cam_init(struct cafe_camera *cam) +{ + int ret; + + mutex_lock(&cam->s_mutex); + if (cam->state != S_NOTREADY) + cam_warn(cam, "Cam init with device in funky state %d", + cam->state); + ret = __cafe_cam_reset(cam); + if (ret) + goto out; + ret = __cafe_cam_cmd(cam, VIDIOC_INT_G_CHIP_IDENT, &cam->sensor_type); + if (ret) + goto out; +// if (cam->sensor->addr != OV7xx0_SID) { + if (cam->sensor_type != V4L2_IDENT_OV7670) { + cam_err(cam, "Unsupported sensor type %d", cam->sensor->addr); + ret = -EINVAL; + goto out; + } +/* Get/set parameters? */ + ret = 0; + cam->state = S_IDLE; + out: + mutex_unlock(&cam->s_mutex); + return ret; +} + +/* + * Configure the sensor to match the parameters we have. Caller should + * hold s_mutex + */ +static int cafe_cam_set_flip(struct cafe_camera *cam) +{ + struct v4l2_control ctrl; + + memset(&ctrl, 0, sizeof(ctrl)); + ctrl.id = V4L2_CID_VFLIP; + ctrl.value = flip; + return __cafe_cam_cmd(cam, VIDIOC_S_CTRL, &ctrl); +} + + +static int cafe_cam_configure(struct cafe_camera *cam) +{ + struct v4l2_format fmt; + int ret, zero = 0; + + if (cam->state != S_IDLE) + return -EINVAL; + fmt.fmt.pix = cam->pix_format; + ret = __cafe_cam_cmd(cam, VIDIOC_INT_INIT, &zero); + if (ret == 0) + ret = __cafe_cam_cmd(cam, VIDIOC_S_FMT, &fmt); + /* + * OV7670 does weird things if flip is set *before* format... + */ + ret += cafe_cam_set_flip(cam); + return ret; +} + +/* -------------------------------------------------------------------- */ +/* + * DMA buffer management. These functions need s_mutex held. + */ + +/* FIXME: this is inefficient as hell, since dma_alloc_coherent just + * does a get_free_pages() call, and we waste a good chunk of an orderN + * allocation. Should try to allocate the whole set in one chunk. + */ +static int cafe_alloc_dma_bufs(struct cafe_camera *cam, int loadtime) +{ + int i; + + cafe_set_config_needed(cam, 1); + if (loadtime) + cam->dma_buf_size = dma_buf_size; + else + cam->dma_buf_size = cam->pix_format.sizeimage; + if (n_dma_bufs > 3) + n_dma_bufs = 3; + + cam->nbufs = 0; + for (i = 0; i < n_dma_bufs; i++) { + cam->dma_bufs[i] = dma_alloc_coherent(&cam->pdev->dev, + cam->dma_buf_size, cam->dma_handles + i, + GFP_KERNEL); + if (cam->dma_bufs[i] == NULL) { + cam_warn(cam, "Failed to allocate DMA buffer\n"); + break; + } + /* For debug, remove eventually */ + memset(cam->dma_bufs[i], 0xcc, cam->dma_buf_size); + (cam->nbufs)++; + } + + switch (cam->nbufs) { + case 1: + dma_free_coherent(&cam->pdev->dev, cam->dma_buf_size, + cam->dma_bufs[0], cam->dma_handles[0]); + cam->nbufs = 0; + case 0: + cam_err(cam, "Insufficient DMA buffers, cannot operate\n"); + return -ENOMEM; + + case 2: + if (n_dma_bufs > 2) + cam_warn(cam, "Will limp along with only 2 buffers\n"); + break; + } + return 0; +} + +static void cafe_free_dma_bufs(struct cafe_camera *cam) +{ + int i; + + for (i = 0; i < cam->nbufs; i++) { + dma_free_coherent(&cam->pdev->dev, cam->dma_buf_size, + cam->dma_bufs[i], cam->dma_handles[i]); + cam->dma_bufs[i] = NULL; + } + cam->nbufs = 0; +} + + + + + +/* ----------------------------------------------------------------------- */ +/* + * Here starts the V4L2 interface code. + */ + +/* + * Read an image from the device. + */ +static ssize_t cafe_deliver_buffer(struct cafe_camera *cam, + char __user *buffer, size_t len, loff_t *pos) +{ + int bufno; + unsigned long flags; + + spin_lock_irqsave(&cam->dev_lock, flags); + if (cam->next_buf < 0) { + cam_err(cam, "deliver_buffer: No next buffer\n"); + spin_unlock_irqrestore(&cam->dev_lock, flags); + return -EIO; + } + bufno = cam->next_buf; + clear_bit(bufno, &cam->flags); + if (++(cam->next_buf) >= cam->nbufs) + cam->next_buf = 0; + if (! test_bit(cam->next_buf, &cam->flags)) + cam->next_buf = -1; + cam->specframes = 0; + spin_unlock_irqrestore(&cam->dev_lock, flags); + + if (len > cam->pix_format.sizeimage) + len = cam->pix_format.sizeimage; + if (copy_to_user(buffer, cam->dma_bufs[bufno], len)) + return -EFAULT; + (*pos) += len; + return len; +} + +/* + * Get everything ready, and start grabbing frames. + */ +static int cafe_read_setup(struct cafe_camera *cam, enum cafe_state state) +{ + int ret; + unsigned long flags; + + /* + * Configuration. If we still don't have DMA buffers, + * make one last, desperate attempt. + */ + if (cam->nbufs == 0) + if (cafe_alloc_dma_bufs(cam, 0)) + return -ENOMEM; + + if (cafe_needs_config(cam)) { + cafe_cam_configure(cam); + ret = cafe_ctlr_configure(cam); + if (ret) + return ret; + } + + /* + * Turn it loose. + */ + spin_lock_irqsave(&cam->dev_lock, flags); + cafe_reset_buffers(cam); + cafe_ctlr_irq_enable(cam); + cam->state = state; + cafe_ctlr_start(cam); + spin_unlock_irqrestore(&cam->dev_lock, flags); + return 0; +} + + +static ssize_t cafe_v4l_read(struct file *filp, + char __user *buffer, size_t len, loff_t *pos) +{ + struct cafe_camera *cam = filp->private_data; + int ret; + + /* + * Perhaps we're in speculative read mode and already + * have data? + */ + mutex_lock(&cam->s_mutex); + if (cam->state == S_SPECREAD) { + if (cam->next_buf >= 0) { + ret = cafe_deliver_buffer(cam, buffer, len, pos); + if (ret != 0) + goto out_unlock; + } + } else if (cam->state == S_FLAKED || cam->state == S_NOTREADY) { + ret = -EIO; + goto out_unlock; + } else if (cam->state != S_IDLE) { + ret = -EBUSY; + goto out_unlock; + } + + /* + * v4l2: multiple processes can open the device, but only + * one gets to grab data from it. + */ + if (cam->owner && cam->owner != filp) { + ret = -EBUSY; + goto out_unlock; + } + cam->owner = filp; + + /* + * Do setup if need be. + */ + if (cam->state != S_SPECREAD) { + ret = cafe_read_setup(cam, S_SINGLEREAD); + if (ret) + goto out_unlock; + } + /* + * Wait for something to happen. This should probably + * be interruptible (FIXME). + */ + wait_event_timeout(cam->iowait, cam->next_buf >= 0, HZ); + if (cam->next_buf < 0) { + cam_err(cam, "read() operation timed out\n"); + cafe_ctlr_stop_dma(cam); + ret = -EIO; + goto out_unlock; + } + /* + * Give them their data and we should be done. + */ + ret = cafe_deliver_buffer(cam, buffer, len, pos); + + out_unlock: + mutex_unlock(&cam->s_mutex); + return ret; +} + + + + + + + + +/* + * Streaming I/O support. + */ + + + +static int cafe_vidioc_streamon(struct file *filp, void *priv, + enum v4l2_buf_type type) +{ + struct cafe_camera *cam = filp->private_data; + int ret = -EINVAL; + + if (type != V4L2_BUF_TYPE_VIDEO_CAPTURE) + goto out; + mutex_lock(&cam->s_mutex); + if (cam->state != S_IDLE || cam->n_sbufs == 0) + goto out_unlock; + + cam->sequence = 0; + ret = cafe_read_setup(cam, S_STREAMING); + + out_unlock: + mutex_unlock(&cam->s_mutex); + out: + return ret; +} + + +static int cafe_vidioc_streamoff(struct file *filp, void *priv, + enum v4l2_buf_type type) +{ + struct cafe_camera *cam = filp->private_data; + int ret = -EINVAL; + + if (type != V4L2_BUF_TYPE_VIDEO_CAPTURE) + goto out; + mutex_lock(&cam->s_mutex); + if (cam->state != S_STREAMING) + goto out_unlock; + + cafe_ctlr_stop_dma(cam); + ret = 0; + + out_unlock: + mutex_unlock(&cam->s_mutex); + out: + return ret; +} + + + +static int cafe_setup_siobuf(struct cafe_camera *cam, int index) +{ + struct cafe_sio_buffer *buf = cam->sb_bufs + index; + + INIT_LIST_HEAD(&buf->list); + buf->v4lbuf.length = PAGE_ALIGN(cam->pix_format.sizeimage); + buf->buffer = vmalloc_user(buf->v4lbuf.length); + if (buf->buffer == NULL) + return -ENOMEM; + buf->mapcount = 0; + buf->cam = cam; + + buf->v4lbuf.index = index; + buf->v4lbuf.type = V4L2_BUF_TYPE_VIDEO_CAPTURE; + buf->v4lbuf.field = V4L2_FIELD_NONE; + buf->v4lbuf.memory = V4L2_MEMORY_MMAP; + /* + * Offset: must be 32-bit even on a 64-bit system. video-buf + * just uses the length times the index, but the spec warns + * against doing just that - vma merging problems. So we + * leave a gap between each pair of buffers. + */ + buf->v4lbuf.m.offset = 2*index*buf->v4lbuf.length; + return 0; +} + +static int cafe_free_sio_buffers(struct cafe_camera *cam) +{ + int i; + + /* + * If any buffers are mapped, we cannot free them at all. + */ + for (i = 0; i < cam->n_sbufs; i++) + if (cam->sb_bufs[i].mapcount > 0) + return -EBUSY; + /* + * OK, let's do it. + */ + for (i = 0; i < cam->n_sbufs; i++) + vfree(cam->sb_bufs[i].buffer); + cam->n_sbufs = 0; + kfree(cam->sb_bufs); + cam->sb_bufs = NULL; + INIT_LIST_HEAD(&cam->sb_avail); + INIT_LIST_HEAD(&cam->sb_full); + return 0; +} + + + +static int cafe_vidioc_reqbufs(struct file *filp, void *priv, + struct v4l2_requestbuffers *req) +{ + struct cafe_camera *cam = filp->private_data; + int ret; + + /* + * Make sure it's something we can do. User pointers could be + * implemented without great pain, but that's not been done yet. + */ + if (req->type != V4L2_BUF_TYPE_VIDEO_CAPTURE) + return -EINVAL; + if (req->memory != V4L2_MEMORY_MMAP) + return -EINVAL; + /* + * If they ask for zero buffers, they really want us to stop streaming + * (if it's happening) and free everything. Should we check owner? + */ + mutex_lock(&cam->s_mutex); + if (req->count == 0) { + if (cam->state == S_STREAMING) + cafe_ctlr_stop_dma(cam); + ret = cafe_free_sio_buffers (cam); + goto out; + } + /* + * Device needs to be idle and working. We *could* try to do the + * right thing in S_SPECREAD by shutting things down, but it + * probably doesn't matter. + */ + if (cam->state != S_IDLE || (cam->owner && cam->owner != filp)) { + ret = -EBUSY; + goto out; + } + cam->owner = filp; + + if (req->count < min_buffers) + req->count = min_buffers; + else if (req->count > max_buffers) + req->count = max_buffers; + if (cam->n_sbufs > 0) { + ret = cafe_free_sio_buffers(cam); + if (ret) + goto out; + } + + cam->sb_bufs = kzalloc(req->count*sizeof(struct cafe_sio_buffer), + GFP_KERNEL); + if (cam->sb_bufs == NULL) { + ret = -ENOMEM; + goto out; + } + for (cam->n_sbufs = 0; cam->n_sbufs < req->count; (cam->n_sbufs++)) { + ret = cafe_setup_siobuf(cam, cam->n_sbufs); + if (ret) + break; + } + + if (cam->n_sbufs == 0) /* no luck at all - ret already set */ + kfree(cam->sb_bufs); + else + ret = 0; + req->count = cam->n_sbufs; /* In case of partial success */ + + out: + mutex_unlock(&cam->s_mutex); + return ret; +} + + +static int cafe_vidioc_querybuf(struct file *filp, void *priv, + struct v4l2_buffer *buf) +{ + struct cafe_camera *cam = filp->private_data; + int ret = -EINVAL; + + mutex_lock(&cam->s_mutex); + if (buf->type != V4L2_BUF_TYPE_VIDEO_CAPTURE) + goto out; + if (buf->index < 0 || buf->index >= cam->n_sbufs) + goto out; + *buf = cam->sb_bufs[buf->index].v4lbuf; + ret = 0; + out: + mutex_unlock(&cam->s_mutex); + return ret; +} + +static int cafe_vidioc_qbuf(struct file *filp, void *priv, + struct v4l2_buffer *buf) +{ + struct cafe_camera *cam = filp->private_data; + struct cafe_sio_buffer *sbuf; + int ret = -EINVAL; + unsigned long flags; + + mutex_lock(&cam->s_mutex); + if (buf->type != V4L2_BUF_TYPE_VIDEO_CAPTURE) + goto out; + if (buf->index < 0 || buf->index >= cam->n_sbufs) + goto out; + sbuf = cam->sb_bufs + buf->index; + if (sbuf->v4lbuf.flags & V4L2_BUF_FLAG_QUEUED) { + ret = 0; /* Already queued?? */ + goto out; + } + if (sbuf->v4lbuf.flags & V4L2_BUF_FLAG_DONE) { + /* Spec doesn't say anything, seems appropriate tho */ + ret = -EBUSY; + goto out; + } + sbuf->v4lbuf.flags |= V4L2_BUF_FLAG_QUEUED; + spin_lock_irqsave(&cam->dev_lock, flags); + list_add(&sbuf->list, &cam->sb_avail); + spin_unlock_irqrestore(&cam->dev_lock, flags); + ret = 0; + out: + mutex_unlock(&cam->s_mutex); + return ret; +} + +static int cafe_vidioc_dqbuf(struct file *filp, void *priv, + struct v4l2_buffer *buf) +{ + struct cafe_camera *cam = filp->private_data; + struct cafe_sio_buffer *sbuf; + int ret = -EINVAL; + unsigned long flags; + + mutex_lock(&cam->s_mutex); + if (buf->type != V4L2_BUF_TYPE_VIDEO_CAPTURE) + goto out_unlock; + if (cam->state != S_STREAMING) + goto out_unlock; + if (list_empty(&cam->sb_full) && filp->f_flags & O_NONBLOCK) { + ret = -EAGAIN; + goto out_unlock; + } + + while (list_empty(&cam->sb_full) && cam->state == S_STREAMING) { + mutex_unlock(&cam->s_mutex); + if (wait_event_interruptible(cam->iowait, + !list_empty(&cam->sb_full))) { + ret = -ERESTARTSYS; + goto out; + } + mutex_lock(&cam->s_mutex); + } + + if (cam->state != S_STREAMING) + ret = -EINTR; + else { + spin_lock_irqsave(&cam->dev_lock, flags); + /* Should probably recheck !list_empty() here */ + sbuf = list_entry(cam->sb_full.next, + struct cafe_sio_buffer, list); + list_del_init(&sbuf->list); + spin_unlock_irqrestore(&cam->dev_lock, flags); + sbuf->v4lbuf.flags &= ~V4L2_BUF_FLAG_DONE; + *buf = sbuf->v4lbuf; + ret = 0; + } + + out_unlock: + mutex_unlock(&cam->s_mutex); + out: + return ret; +} + + + +static void cafe_v4l_vm_open(struct vm_area_struct *vma) +{ + struct cafe_sio_buffer *sbuf = vma->vm_private_data; + /* + * Locking: done under mmap_sem, so we don't need to + * go back to the camera lock here. + */ + sbuf->mapcount++; +} + + +static void cafe_v4l_vm_close(struct vm_area_struct *vma) +{ + struct cafe_sio_buffer *sbuf = vma->vm_private_data; + + mutex_lock(&sbuf->cam->s_mutex); + sbuf->mapcount--; + /* Docs say we should stop I/O too... */ + if (sbuf->mapcount == 0) + sbuf->v4lbuf.flags &= ~V4L2_BUF_FLAG_MAPPED; + mutex_unlock(&sbuf->cam->s_mutex); +} + +static struct vm_operations_struct cafe_v4l_vm_ops = { + .open = cafe_v4l_vm_open, + .close = cafe_v4l_vm_close +}; + + +static int cafe_v4l_mmap(struct file *filp, struct vm_area_struct *vma) +{ + struct cafe_camera *cam = filp->private_data; + unsigned long offset = vma->vm_pgoff << PAGE_SHIFT; + int ret = -EINVAL; + int i; + struct cafe_sio_buffer *sbuf = NULL; + + if (! (vma->vm_flags & VM_WRITE) || ! (vma->vm_flags & VM_SHARED)) + return -EINVAL; + /* + * Find the buffer they are looking for. + */ + mutex_lock(&cam->s_mutex); + for (i = 0; i < cam->n_sbufs; i++) + if (cam->sb_bufs[i].v4lbuf.m.offset == offset) { + sbuf = cam->sb_bufs + i; + break; + } + if (sbuf == NULL) + goto out; + + ret = remap_vmalloc_range(vma, sbuf->buffer, 0); + if (ret) + goto out; + vma->vm_flags |= VM_DONTEXPAND; + vma->vm_private_data = sbuf; + vma->vm_ops = &cafe_v4l_vm_ops; + sbuf->v4lbuf.flags |= V4L2_BUF_FLAG_MAPPED; + cafe_v4l_vm_open(vma); + ret = 0; + out: + mutex_unlock(&cam->s_mutex); + return ret; +} + + + +static int cafe_v4l_open(struct inode *inode, struct file *filp) +{ + struct cafe_camera *cam; + + cam = cafe_find_dev(iminor(inode)); + if (cam == NULL) + return -ENODEV; + filp->private_data = cam; + + mutex_lock(&cam->s_mutex); + if (cam->users == 0) { + cafe_ctlr_power_up(cam); + __cafe_cam_reset(cam); + cafe_set_config_needed(cam, 1); + /* FIXME make sure this is complete */ + } + (cam->users)++; + mutex_unlock(&cam->s_mutex); + return 0; +} + + +static int cafe_v4l_release(struct inode *inode, struct file *filp) +{ + struct cafe_camera *cam = filp->private_data; + + mutex_lock(&cam->s_mutex); + (cam->users)--; + if (filp == cam->owner) { + cafe_ctlr_stop_dma(cam); + cafe_free_sio_buffers(cam); + cam->owner = NULL; + } + if (cam->users == 0) { + cafe_ctlr_power_down(cam); + if (! alloc_bufs_at_load) + cafe_free_dma_bufs(cam); + } + mutex_unlock(&cam->s_mutex); + return 0; +} + + + +static unsigned int cafe_v4l_poll(struct file *filp, + struct poll_table_struct *pt) +{ + struct cafe_camera *cam = filp->private_data; + + poll_wait(filp, &cam->iowait, pt); + if (cam->next_buf >= 0) + return POLLIN | POLLRDNORM; + return 0; +} + + + +static int cafe_vidioc_queryctrl(struct file *filp, void *priv, + struct v4l2_queryctrl *qc) +{ + struct cafe_camera *cam = filp->private_data; + int ret; + + mutex_lock(&cam->s_mutex); + ret = __cafe_cam_cmd(cam, VIDIOC_QUERYCTRL, qc); + mutex_unlock(&cam->s_mutex); + return ret; +} + + +static int cafe_vidioc_g_ctrl(struct file *filp, void *priv, + struct v4l2_control *ctrl) +{ + struct cafe_camera *cam = filp->private_data; + int ret; + + mutex_lock(&cam->s_mutex); + ret = __cafe_cam_cmd(cam, VIDIOC_G_CTRL, ctrl); + mutex_unlock(&cam->s_mutex); + return ret; +} + + +static int cafe_vidioc_s_ctrl(struct file *filp, void *priv, + struct v4l2_control *ctrl) +{ + struct cafe_camera *cam = filp->private_data; + int ret; + + mutex_lock(&cam->s_mutex); + ret = __cafe_cam_cmd(cam, VIDIOC_S_CTRL, ctrl); + mutex_unlock(&cam->s_mutex); + return ret; +} + + + + + +static int cafe_vidioc_querycap(struct file *file, void *priv, + struct v4l2_capability *cap) +{ + strcpy(cap->driver, "cafe_ccic"); + strcpy(cap->card, "cafe_ccic"); + cap->version = CAFE_VERSION; + cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | + V4L2_CAP_READWRITE | V4L2_CAP_STREAMING; + return 0; +} + + +/* + * The default format we use until somebody says otherwise. + */ +static struct v4l2_pix_format cafe_def_pix_format = { + .width = VGA_WIDTH, + .height = VGA_HEIGHT, + .pixelformat = V4L2_PIX_FMT_YUYV, + .field = V4L2_FIELD_NONE, + .bytesperline = VGA_WIDTH*2, + .sizeimage = VGA_WIDTH*VGA_HEIGHT*2, +}; + +static int cafe_vidioc_enum_fmt_cap(struct file *filp, + void *priv, struct v4l2_fmtdesc *fmt) +{ + struct cafe_camera *cam = priv; + int ret; + + if (fmt->type != V4L2_BUF_TYPE_VIDEO_CAPTURE) + return -EINVAL; + mutex_lock(&cam->s_mutex); + ret = __cafe_cam_cmd(cam, VIDIOC_ENUM_FMT, fmt); + mutex_unlock(&cam->s_mutex); + return ret; +} + + +static int cafe_vidioc_try_fmt_cap (struct file *filp, void *priv, + struct v4l2_format *fmt) +{ + struct cafe_camera *cam = priv; + int ret; + + mutex_lock(&cam->s_mutex); + ret = __cafe_cam_cmd(cam, VIDIOC_TRY_FMT, fmt); + mutex_unlock(&cam->s_mutex); + return ret; +} + +static int cafe_vidioc_s_fmt_cap(struct file *filp, void *priv, + struct v4l2_format *fmt) +{ + struct cafe_camera *cam = priv; + int ret; + + /* + * Can't do anything if the device is not idle + * Also can't if there are streaming buffers in place. + */ + if (cam->state != S_IDLE || cam->n_sbufs > 0) + return -EBUSY; + /* + * See if the formatting works in principle. + */ + ret = cafe_vidioc_try_fmt_cap(filp, priv, fmt); + if (ret) + return ret; + /* + * Now we start to change things for real, so let's do it + * under lock. + */ + mutex_lock(&cam->s_mutex); + cam->pix_format = fmt->fmt.pix; + /* + * Make sure we have appropriate DMA buffers. + */ + ret = -ENOMEM; + if (cam->nbufs > 0 && cam->dma_buf_size < cam->pix_format.sizeimage) + cafe_free_dma_bufs(cam); + if (cam->nbufs == 0) { + if (cafe_alloc_dma_bufs(cam, 0)) + goto out; + } + /* + * It looks like this might work, so let's program the sensor. + */ + ret = cafe_cam_configure(cam); + if (! ret) + ret = cafe_ctlr_configure(cam); + out: + mutex_unlock(&cam->s_mutex); + return ret; +} + +/* + * Return our stored notion of how the camera is/should be configured. + * The V4l2 spec wants us to be smarter, and actually get this from + * the camera (and not mess with it at open time). Someday. + */ +static int cafe_vidioc_g_fmt_cap(struct file *filp, void *priv, + struct v4l2_format *f) +{ + struct cafe_camera *cam = priv; + + f->fmt.pix = cam->pix_format; + return 0; +} + +/* + * We only have one input - the sensor - so minimize the nonsense here. + */ +static int cafe_vidioc_enum_input(struct file *filp, void *priv, + struct v4l2_input *input) +{ + if (input->index != 0) + return -EINVAL; + + input->type = V4L2_INPUT_TYPE_CAMERA; + input->std = V4L2_STD_ALL; /* Not sure what should go here */ + strcpy(input->name, "Camera"); + return 0; +} + +static int cafe_vidioc_g_input(struct file *filp, void *priv, unsigned int *i) +{ + *i = 0; + return 0; +} + +static int cafe_vidioc_s_input(struct file *filp, void *priv, unsigned int i) +{ + if (i != 0) + return -EINVAL; + return 0; +} + +/* from vivi.c */ +static int cafe_vidioc_s_std(struct file *filp, void *priv, v4l2_std_id *a) +{ + return 0; +} + +/* + * G/S_PARM. Most of this is done by the sensor, but we are + * the level which controls the number of read buffers. + */ +static int cafe_vidioc_g_parm(struct file *filp, void *priv, + struct v4l2_streamparm *parms) +{ + struct cafe_camera *cam = priv; + int ret; + + mutex_lock(&cam->s_mutex); + ret = __cafe_cam_cmd(cam, VIDIOC_G_PARM, parms); + mutex_unlock(&cam->s_mutex); + parms->parm.capture.readbuffers = n_dma_bufs; + return ret; +} + +static int cafe_vidioc_s_parm(struct file *filp, void *priv, + struct v4l2_streamparm *parms) +{ + struct cafe_camera *cam = priv; + int ret; + + mutex_lock(&cam->s_mutex); + ret = __cafe_cam_cmd(cam, VIDIOC_S_PARM, parms); + mutex_unlock(&cam->s_mutex); + parms->parm.capture.readbuffers = n_dma_bufs; + return ret; +} + + +static void cafe_v4l_dev_release(struct video_device *vd) +{ + struct cafe_camera *cam = container_of(vd, struct cafe_camera, v4ldev); + + kfree(cam); +} + + +/* + * This template device holds all of those v4l2 methods; we + * clone it for specific real devices. + */ + +static struct file_operations cafe_v4l_fops = { + .owner = THIS_MODULE, + .open = cafe_v4l_open, + .release = cafe_v4l_release, + .read = cafe_v4l_read, + .poll = cafe_v4l_poll, + .mmap = cafe_v4l_mmap, + .ioctl = video_ioctl2, + .llseek = no_llseek, +}; + +static struct video_device cafe_v4l_template = { + .name = "cafe", + .type = VFL_TYPE_GRABBER, + .type2 = VID_TYPE_CAPTURE, + .minor = -1, /* Get one dynamically */ + .tvnorms = V4L2_STD_NTSC_M, + .current_norm = V4L2_STD_NTSC_M, /* make mplayer happy */ + + .fops = &cafe_v4l_fops, + .release = cafe_v4l_dev_release, + + .vidioc_querycap = cafe_vidioc_querycap, + .vidioc_enum_fmt_cap = cafe_vidioc_enum_fmt_cap, + .vidioc_try_fmt_cap = cafe_vidioc_try_fmt_cap, + .vidioc_s_fmt_cap = cafe_vidioc_s_fmt_cap, + .vidioc_g_fmt_cap = cafe_vidioc_g_fmt_cap, + .vidioc_enum_input = cafe_vidioc_enum_input, + .vidioc_g_input = cafe_vidioc_g_input, + .vidioc_s_input = cafe_vidioc_s_input, + .vidioc_s_std = cafe_vidioc_s_std, + .vidioc_reqbufs = cafe_vidioc_reqbufs, + .vidioc_querybuf = cafe_vidioc_querybuf, + .vidioc_qbuf = cafe_vidioc_qbuf, + .vidioc_dqbuf = cafe_vidioc_dqbuf, + .vidioc_streamon = cafe_vidioc_streamon, + .vidioc_streamoff = cafe_vidioc_streamoff, + .vidioc_queryctrl = cafe_vidioc_queryctrl, + .vidioc_g_ctrl = cafe_vidioc_g_ctrl, + .vidioc_s_ctrl = cafe_vidioc_s_ctrl, + .vidioc_g_parm = cafe_vidioc_g_parm, + .vidioc_s_parm = cafe_vidioc_s_parm, +}; + + + + + + + +/* ---------------------------------------------------------------------- */ +/* + * Interrupt handler stuff + */ + + + +static void cafe_frame_tasklet(unsigned long data) +{ + struct cafe_camera *cam = (struct cafe_camera *) data; + int i; + unsigned long flags; + struct cafe_sio_buffer *sbuf; + + spin_lock_irqsave(&cam->dev_lock, flags); + for (i = 0; i < cam->nbufs; i++) { + int bufno = cam->next_buf; + if (bufno < 0) { /* "will never happen" */ + cam_err(cam, "No valid bufs in tasklet!\n"); + break; + } + if (++(cam->next_buf) >= cam->nbufs) + cam->next_buf = 0; + if (! test_bit(bufno, &cam->flags)) + continue; + if (list_empty(&cam->sb_avail)) + break; /* Leave it valid, hope for better later */ + clear_bit(bufno, &cam->flags); + /* + * We could perhaps drop the spinlock during this + * big copy. Something to consider. + */ + sbuf = list_entry(cam->sb_avail.next, + struct cafe_sio_buffer, list); + memcpy(sbuf->buffer, cam->dma_bufs[bufno], + cam->pix_format.sizeimage); + sbuf->v4lbuf.bytesused = cam->pix_format.sizeimage; + sbuf->v4lbuf.sequence = cam->buf_seq[bufno]; + sbuf->v4lbuf.flags &= ~V4L2_BUF_FLAG_QUEUED; + sbuf->v4lbuf.flags |= V4L2_BUF_FLAG_DONE; + list_move_tail(&sbuf->list, &cam->sb_full); + } + if (! list_empty(&cam->sb_full)) + wake_up(&cam->iowait); + spin_unlock_irqrestore(&cam->dev_lock, flags); +} + + + +static void cafe_frame_complete(struct cafe_camera *cam, int frame) +{ + /* + * Basic frame housekeeping. + */ + if (test_bit(frame, &cam->flags) && printk_ratelimit()) + cam_err(cam, "Frame overrun on %d, frames lost\n", frame); + set_bit(frame, &cam->flags); + clear_bit(CF_DMA_ACTIVE, &cam->flags); + if (cam->next_buf < 0) + cam->next_buf = frame; + cam->buf_seq[frame] = ++(cam->sequence); + + switch (cam->state) { + /* + * If in single read mode, try going speculative. + */ + case S_SINGLEREAD: + cam->state = S_SPECREAD; + cam->specframes = 0; + wake_up(&cam->iowait); + break; + + /* + * If we are already doing speculative reads, and nobody is + * reading them, just stop. + */ + case S_SPECREAD: + if (++(cam->specframes) >= cam->nbufs) { + cafe_ctlr_stop(cam); + cafe_ctlr_irq_disable(cam); + cam->state = S_IDLE; + } + wake_up(&cam->iowait); + break; + /* + * For the streaming case, we defer the real work to the + * camera tasklet. + * + * FIXME: if the application is not consuming the buffers, + * we should eventually put things on hold and restart in + * vidioc_dqbuf(). + */ + case S_STREAMING: + tasklet_schedule(&cam->s_tasklet); + break; + + default: + cam_err(cam, "Frame interrupt in non-operational state\n"); + break; + } +} + + + + +static void cafe_frame_irq(struct cafe_camera *cam, unsigned int irqs) +{ + unsigned int frame; + + cafe_reg_write(cam, REG_IRQSTAT, FRAMEIRQS); /* Clear'em all */ + /* + * Handle any frame completions. There really should + * not be more than one of these, or we have fallen + * far behind. + */ + for (frame = 0; frame < cam->nbufs; frame++) + if (irqs & (IRQ_EOF0 << frame)) + cafe_frame_complete(cam, frame); + /* + * If a frame starts, note that we have DMA active. This + * code assumes that we won't get multiple frame interrupts + * at once; may want to rethink that. + */ + if (irqs & (IRQ_SOF0 | IRQ_SOF1 | IRQ_SOF2)) + set_bit(CF_DMA_ACTIVE, &cam->flags); +} + + + +static irqreturn_t cafe_irq(int irq, void *data) +{ + struct cafe_camera *cam = data; + unsigned int irqs; + + spin_lock(&cam->dev_lock); + irqs = cafe_reg_read(cam, REG_IRQSTAT); + if ((irqs & ALLIRQS) == 0) { + spin_unlock(&cam->dev_lock); + return IRQ_NONE; + } + if (irqs & FRAMEIRQS) + cafe_frame_irq(cam, irqs); + if (irqs & TWSIIRQS) { + cafe_reg_write(cam, REG_IRQSTAT, TWSIIRQS); + wake_up(&cam->smbus_wait); + } + spin_unlock(&cam->dev_lock); + return IRQ_HANDLED; +} + + +/* -------------------------------------------------------------------------- */ +#ifdef CONFIG_VIDEO_ADV_DEBUG +/* + * Debugfs stuff. + */ + +static char cafe_debug_buf[1024]; +static struct dentry *cafe_dfs_root; + +static void cafe_dfs_setup(void) +{ + cafe_dfs_root = debugfs_create_dir("cafe_ccic", NULL); + if (IS_ERR(cafe_dfs_root)) { + cafe_dfs_root = NULL; /* Never mind */ + printk(KERN_NOTICE "cafe_ccic unable to set up debugfs\n"); + } +} + +static void cafe_dfs_shutdown(void) +{ + if (cafe_dfs_root) + debugfs_remove(cafe_dfs_root); +} + +static int cafe_dfs_open(struct inode *inode, struct file *file) +{ + file->private_data = inode->i_private; + return 0; +} + +static ssize_t cafe_dfs_read_regs(struct file *file, + char __user *buf, size_t count, loff_t *ppos) +{ + struct cafe_camera *cam = file->private_data; + char *s = cafe_debug_buf; + int offset; + + for (offset = 0; offset < 0x44; offset += 4) + s += sprintf(s, "%02x: %08x\n", offset, + cafe_reg_read(cam, offset)); + for (offset = 0x88; offset <= 0x90; offset += 4) + s += sprintf(s, "%02x: %08x\n", offset, + cafe_reg_read(cam, offset)); + for (offset = 0xb4; offset <= 0xbc; offset += 4) + s += sprintf(s, "%02x: %08x\n", offset, + cafe_reg_read(cam, offset)); + for (offset = 0x3000; offset <= 0x300c; offset += 4) + s += sprintf(s, "%04x: %08x\n", offset, + cafe_reg_read(cam, offset)); + return simple_read_from_buffer(buf, count, ppos, cafe_debug_buf, + s - cafe_debug_buf); +} + +static struct file_operations cafe_dfs_reg_ops = { + .owner = THIS_MODULE, + .read = cafe_dfs_read_regs, + .open = cafe_dfs_open +}; + +static ssize_t cafe_dfs_read_cam(struct file *file, + char __user *buf, size_t count, loff_t *ppos) +{ + struct cafe_camera *cam = file->private_data; + char *s = cafe_debug_buf; + int offset; + + if (! cam->sensor) + return -EINVAL; + for (offset = 0x0; offset < 0x8a; offset++) + { + u8 v; + + cafe_smbus_read_data(cam, cam->sensor->addr, offset, &v); + s += sprintf(s, "%02x: %02x\n", offset, v); + } + return simple_read_from_buffer(buf, count, ppos, cafe_debug_buf, + s - cafe_debug_buf); +} + +static struct file_operations cafe_dfs_cam_ops = { + .owner = THIS_MODULE, + .read = cafe_dfs_read_cam, + .open = cafe_dfs_open +}; + + + +static void cafe_dfs_cam_setup(struct cafe_camera *cam) +{ + char fname[40]; + + if (!cafe_dfs_root) + return; + sprintf(fname, "regs-%d", cam->v4ldev.minor); + cam->dfs_regs = debugfs_create_file(fname, 0444, cafe_dfs_root, + cam, &cafe_dfs_reg_ops); + sprintf(fname, "cam-%d", cam->v4ldev.minor); + cam->dfs_cam_regs = debugfs_create_file(fname, 0444, cafe_dfs_root, + cam, &cafe_dfs_cam_ops); +} + + +static void cafe_dfs_cam_shutdown(struct cafe_camera *cam) +{ + if (! IS_ERR(cam->dfs_regs)) + debugfs_remove(cam->dfs_regs); + if (! IS_ERR(cam->dfs_cam_regs)) + debugfs_remove(cam->dfs_cam_regs); +} + +#else + +#define cafe_dfs_setup() +#define cafe_dfs_shutdown() +#define cafe_dfs_cam_setup(cam) +#define cafe_dfs_cam_shutdown(cam) +#endif /* CONFIG_VIDEO_ADV_DEBUG */ + + + + +/* ------------------------------------------------------------------------*/ +/* + * PCI interface stuff. + */ + +static int cafe_pci_probe(struct pci_dev *pdev, + const struct pci_device_id *id) +{ + int ret; + u16 classword; + struct cafe_camera *cam; + /* + * Make sure we have a camera here - we'll get calls for + * the other cafe devices as well. + */ + pci_read_config_word(pdev, PCI_CLASS_DEVICE, &classword); + if (classword != PCI_CLASS_MULTIMEDIA_VIDEO) + return -ENODEV; + /* + * Start putting together one of our big camera structures. + */ + ret = -ENOMEM; + cam = kzalloc(sizeof(struct cafe_camera), GFP_KERNEL); + if (cam == NULL) + goto out; + mutex_init(&cam->s_mutex); + mutex_lock(&cam->s_mutex); + spin_lock_init(&cam->dev_lock); + cam->state = S_NOTREADY; + cafe_set_config_needed(cam, 1); + init_waitqueue_head(&cam->smbus_wait); + init_waitqueue_head(&cam->iowait); + cam->pdev = pdev; + cam->pix_format = cafe_def_pix_format; + INIT_LIST_HEAD(&cam->dev_list); + INIT_LIST_HEAD(&cam->sb_avail); + INIT_LIST_HEAD(&cam->sb_full); + tasklet_init(&cam->s_tasklet, cafe_frame_tasklet, (unsigned long) cam); + /* + * Get set up on the PCI bus. + */ + ret = pci_enable_device(pdev); + if (ret) + goto out_free; + pci_set_master(pdev); + + ret = -EIO; + cam->regs = pci_iomap(pdev, 0, 0); + if (! cam->regs) { + printk(KERN_ERR "Unable to ioremap cafe-ccic regs\n"); + goto out_free; + } + ret = request_irq(pdev->irq, cafe_irq, IRQF_SHARED, "cafe-ccic", cam); + if (ret) + goto out_iounmap; + cafe_ctlr_init(cam); + cafe_ctlr_power_up(cam); + /* + * Set up I2C/SMBUS communications + */ + mutex_unlock(&cam->s_mutex); /* attach can deadlock */ + ret = cafe_smbus_setup(cam); + if (ret) + goto out_freeirq; + /* + * Get the v4l2 setup done. + */ + mutex_lock(&cam->s_mutex); + cam->v4ldev = cafe_v4l_template; + cam->v4ldev.debug = 0; +// cam->v4ldev.debug = V4L2_DEBUG_IOCTL_ARG; + ret = video_register_device(&cam->v4ldev, VFL_TYPE_GRABBER, -1); + if (ret) + goto out_smbus; + /* + * If so requested, try to get our DMA buffers now. + */ + if (alloc_bufs_at_load) { + if (cafe_alloc_dma_bufs(cam, 1)) + cam_warn(cam, "Unable to alloc DMA buffers at load" + " will try again later."); + } + + cafe_dfs_cam_setup(cam); + mutex_unlock(&cam->s_mutex); + cafe_add_dev(cam); + return 0; + + out_smbus: + cafe_smbus_shutdown(cam); + out_freeirq: + cafe_ctlr_power_down(cam); + free_irq(pdev->irq, cam); + out_iounmap: + pci_iounmap(pdev, cam->regs); + out_free: + kfree(cam); + out: + return ret; +} + + +/* + * Shut down an initialized device + */ +static void cafe_shutdown(struct cafe_camera *cam) +{ +/* FIXME: Make sure we take care of everything here */ + cafe_dfs_cam_shutdown(cam); + if (cam->n_sbufs > 0) + /* What if they are still mapped? Shouldn't be, but... */ + cafe_free_sio_buffers(cam); + cafe_remove_dev(cam); + cafe_ctlr_stop_dma(cam); + cafe_ctlr_power_down(cam); + cafe_smbus_shutdown(cam); + cafe_free_dma_bufs(cam); + free_irq(cam->pdev->irq, cam); + pci_iounmap(cam->pdev, cam->regs); + video_unregister_device(&cam->v4ldev); + /* kfree(cam); done in v4l_release () */ +} + + +static void cafe_pci_remove(struct pci_dev *pdev) +{ + struct cafe_camera *cam = cafe_find_by_pdev(pdev); + + if (cam == NULL) { + cam_warn(cam, "pci_remove on unknown pdev %p\n", pdev); + return; + } + mutex_lock(&cam->s_mutex); + if (cam->users > 0) + cam_warn(cam, "Removing a device with users!\n"); + cafe_shutdown(cam); +/* No unlock - it no longer exists */ +} + + + + +static struct pci_device_id cafe_ids[] = { + { PCI_DEVICE(0x1148, 0x4340) }, /* Temporary ID on devel board */ + { PCI_DEVICE(0x11ab, 0x4100) }, /* Eventual real ID */ + { PCI_DEVICE(0x11ab, 0x4102) }, /* Really eventual real ID */ + { 0, } +}; + +MODULE_DEVICE_TABLE(pci, cafe_ids); + +static struct pci_driver cafe_pci_driver = { + .name = "cafe1000-ccic", + .id_table = cafe_ids, + .probe = cafe_pci_probe, + .remove = cafe_pci_remove, +}; + + + + +static int __init cafe_init(void) +{ + int ret; + + printk(KERN_NOTICE "Marvell M88ALP01 'CAFE' Camera Controller version %d\n", + CAFE_VERSION); + cafe_dfs_setup(); + ret = pci_register_driver(&cafe_pci_driver); + if (ret) { + printk(KERN_ERR "Unable to register cafe_ccic driver\n"); + goto out; + } + request_module("ov7670"); /* FIXME want something more general */ + ret = 0; + + out: + return ret; +} + + +static void __exit cafe_exit(void) +{ + pci_unregister_driver(&cafe_pci_driver); + cafe_dfs_shutdown(); +} + +module_init(cafe_init); +module_exit(cafe_exit); diff --git a/drivers/media/video/compat_ioctl32.c b/drivers/media/video/compat_ioctl32.c index d82a488f12a..f065ad12cc6 100644 --- a/drivers/media/video/compat_ioctl32.c +++ b/drivers/media/video/compat_ioctl32.c @@ -118,7 +118,7 @@ static int native_ioctl(struct file *file, unsigned int cmd, unsigned long arg) ret = file->f_op->unlocked_ioctl(file, cmd, arg); else if (file->f_op->ioctl) { lock_kernel(); - ret = file->f_op->ioctl(file->f_dentry->d_inode, file, cmd, arg); + ret = file->f_op->ioctl(file->f_path.dentry->d_inode, file, cmd, arg); unlock_kernel(); } diff --git a/drivers/media/video/cpia_pp.c b/drivers/media/video/cpia_pp.c index 41f4b8d1755..b12cec94f4c 100644 --- a/drivers/media/video/cpia_pp.c +++ b/drivers/media/video/cpia_pp.c @@ -82,6 +82,8 @@ struct pp_cam_entry { struct pardevice *pdev; struct parport *port; struct work_struct cb_task; + void (*cb_func)(void *cbdata); + void *cb_data; int open_count; wait_queue_head_t wq_stream; /* image state flags */ @@ -130,6 +132,20 @@ static void cpia_parport_disable_irq( struct parport *port ) { #define PARPORT_CHUNK_SIZE PAGE_SIZE +static void cpia_pp_run_callback(struct work_struct *work) +{ + void (*cb_func)(void *cbdata); + void *cb_data; + struct pp_cam_entry *cam; + + cam = container_of(work, struct pp_cam_entry, cb_task); + cb_func = cam->cb_func; + cb_data = cam->cb_data; + work_release(work); + + cb_func(cb_data); +} + /**************************************************************************** * * CPiA-specific low-level parport functions for nibble uploads @@ -664,7 +680,9 @@ static int cpia_pp_registerCallback(void *privdata, void (*cb)(void *cbdata), vo int retval = 0; if(cam->port->irq != PARPORT_IRQ_NONE) { - INIT_WORK(&cam->cb_task, cb, cbdata); + cam->cb_func = cb; + cam->cb_data = cbdata; + INIT_WORK_NAR(&cam->cb_task, cpia_pp_run_callback); } else { retval = -1; } diff --git a/drivers/media/video/cx88/Kconfig b/drivers/media/video/cx88/Kconfig index 0f9d9696361..b2a66ba625f 100644 --- a/drivers/media/video/cx88/Kconfig +++ b/drivers/media/video/cx88/Kconfig @@ -53,6 +53,7 @@ config VIDEO_CX88_DVB select DVB_OR51132 if !DVB_FE_CUSTOMISE select DVB_CX22702 if !DVB_FE_CUSTOMISE select DVB_LGDT330X if !DVB_FE_CUSTOMISE + select DVB_TUNER_LGH06XF if !DVB_FE_CUSTOMISE select DVB_NXT200X if !DVB_FE_CUSTOMISE select DVB_CX24123 if !DVB_FE_CUSTOMISE select DVB_ISL6421 if !DVB_FE_CUSTOMISE diff --git a/drivers/media/video/cx88/cx88-blackbird.c b/drivers/media/video/cx88/cx88-blackbird.c index 46738321ada..0cf0360588e 100644 --- a/drivers/media/video/cx88/cx88-blackbird.c +++ b/drivers/media/video/cx88/cx88-blackbird.c @@ -50,7 +50,6 @@ MODULE_PARM_DESC(debug,"enable debug messages [blackbird]"); #define dprintk(level,fmt, arg...) if (debug >= level) \ printk(KERN_DEBUG "%s/2-bb: " fmt, dev->core->name , ## arg) -static LIST_HEAD(cx8802_devlist); /* ------------------------------------------------------------------ */ @@ -882,7 +881,7 @@ static int mpeg_do_ioctl(struct inode *inode, struct file *file, BLACKBIRD_MPEG_CAPTURE, BLACKBIRD_RAW_BITS_NONE); - cx88_do_ioctl(inode, file, 0, dev->core, cmd, arg, mpeg_do_ioctl); + cx88_do_ioctl(inode, file, 0, dev->core, cmd, arg, cx88_ioctl_hook); blackbird_initialize_codec(dev); cx88_set_scale(dev->core, dev->width, dev->height, @@ -914,11 +913,15 @@ static int mpeg_do_ioctl(struct inode *inode, struct file *file, } default: - return cx88_do_ioctl(inode, file, 0, dev->core, cmd, arg, mpeg_do_ioctl); + return cx88_do_ioctl(inode, file, 0, dev->core, cmd, arg, cx88_ioctl_hook); } return 0; } +int (*cx88_ioctl_hook)(struct inode *inode, struct file *file, + unsigned int cmd, void *arg); +unsigned int (*cx88_ioctl_translator)(unsigned int cmd); + static unsigned int mpeg_translate_ioctl(unsigned int cmd) { return cmd; @@ -927,33 +930,49 @@ static unsigned int mpeg_translate_ioctl(unsigned int cmd) static int mpeg_ioctl(struct inode *inode, struct file *file, unsigned int cmd, unsigned long arg) { - cmd = mpeg_translate_ioctl( cmd ); - return video_usercopy(inode, file, cmd, arg, mpeg_do_ioctl); + cmd = cx88_ioctl_translator( cmd ); + return video_usercopy(inode, file, cmd, arg, cx88_ioctl_hook); } static int mpeg_open(struct inode *inode, struct file *file) { int minor = iminor(inode); - struct cx8802_dev *h,*dev = NULL; + struct cx8802_dev *dev = NULL; struct cx8802_fh *fh; - struct list_head *list; + struct cx8802_driver *drv = NULL; + int err; - list_for_each(list,&cx8802_devlist) { - h = list_entry(list, struct cx8802_dev, devlist); - if (h->mpeg_dev->minor == minor) - dev = h; - } - if (NULL == dev) + dev = cx8802_get_device(inode); + + dprintk( 1, "%s\n", __FUNCTION__); + + if (dev == NULL) return -ENODEV; - if (blackbird_initialize_codec(dev) < 0) + /* Make sure we can acquire the hardware */ + drv = cx8802_get_driver(dev, CX88_MPEG_BLACKBIRD); + if (drv) { + err = drv->request_acquire(drv); + if(err != 0) { + dprintk(1,"%s: Unable to acquire hardware, %d\n", __FUNCTION__, err); + return err; + } + } + + if (blackbird_initialize_codec(dev) < 0) { + if (drv) + drv->request_release(drv); return -EINVAL; + } dprintk(1,"open minor=%d\n",minor); /* allocate + initialize per filehandle data */ fh = kzalloc(sizeof(*fh),GFP_KERNEL); - if (NULL == fh) + if (NULL == fh) { + if (drv) + drv->request_release(drv); return -ENOMEM; + } file->private_data = fh; fh->dev = dev; @@ -974,6 +993,8 @@ static int mpeg_open(struct inode *inode, struct file *file) static int mpeg_release(struct inode *inode, struct file *file) { struct cx8802_fh *fh = file->private_data; + struct cx8802_dev *dev = NULL; + struct cx8802_driver *drv = NULL; /* blackbird_api_cmd(fh->dev, CX2341X_ENC_STOP_CAPTURE, 3, 0, BLACKBIRD_END_NOW, 0, 0x13); */ blackbird_api_cmd(fh->dev, CX2341X_ENC_STOP_CAPTURE, 3, 0, @@ -992,6 +1013,16 @@ static int mpeg_release(struct inode *inode, struct file *file) videobuf_mmap_free(&fh->mpegq); file->private_data = NULL; kfree(fh); + + /* Make sure we release the hardware */ + dev = cx8802_get_device(inode); + if (dev == NULL) + return -ENODEV; + + drv = cx8802_get_driver(dev, CX88_MPEG_BLACKBIRD); + if (drv) + drv->request_release(drv); + return 0; } @@ -1043,6 +1074,44 @@ static struct video_device cx8802_mpeg_template = /* ------------------------------------------------------------------ */ +/* The CX8802 MPEG API will call this when we can use the hardware */ +static int cx8802_blackbird_advise_acquire(struct cx8802_driver *drv) +{ + struct cx88_core *core = drv->core; + int err = 0; + + switch (core->board) { + case CX88_BOARD_HAUPPAUGE_HVR1300: + /* By default, core setup will leave the cx22702 out of reset, on the bus. + * We left the hardware on power up with the cx22702 active. + * We're being given access to re-arrange the GPIOs. + * Take the bus off the cx22702 and put the cx23416 on it. + */ + cx_clear(MO_GP0_IO, 0x00000080); /* cx22702 in reset */ + cx_set(MO_GP0_IO, 0x00000004); /* Disable the cx22702 */ + break; + default: + err = -ENODEV; + } + return err; +} + +/* The CX8802 MPEG API will call this when we need to release the hardware */ +static int cx8802_blackbird_advise_release(struct cx8802_driver *drv) +{ + struct cx88_core *core = drv->core; + int err = 0; + + switch (core->board) { + case CX88_BOARD_HAUPPAUGE_HVR1300: + /* Exit leaving the cx23416 on the bus */ + break; + default: + err = -ENODEV; + } + return err; +} + static void blackbird_unregister_video(struct cx8802_dev *dev) { if (dev->mpeg_dev) { @@ -1073,28 +1142,23 @@ static int blackbird_register_video(struct cx8802_dev *dev) /* ----------------------------------------------------------- */ -static int __devinit blackbird_probe(struct pci_dev *pci_dev, - const struct pci_device_id *pci_id) +static int cx8802_blackbird_probe(struct cx8802_driver *drv) { - struct cx8802_dev *dev; - struct cx88_core *core; + struct cx88_core *core = drv->core; + struct cx8802_dev *dev = core->dvbdev; int err; - /* general setup */ - core = cx88_core_get(pci_dev); - if (NULL == core) - return -EINVAL; + dprintk( 1, "%s\n", __FUNCTION__); + dprintk( 1, " ->being probed by Card=%d Name=%s, PCI %02x:%02x\n", + core->board, + core->name, + core->pci_bus, + core->pci_slot); err = -ENODEV; if (!(cx88_boards[core->board].mpeg & CX88_MPEG_BLACKBIRD)) goto fail_core; - err = -ENOMEM; - dev = kzalloc(sizeof(*dev),GFP_KERNEL); - if (NULL == dev) - goto fail_core; - dev->pci = pci_dev; - dev->core = core; dev->width = 720; dev->height = 576; cx2341x_fill_defaults(&dev->params); @@ -1106,64 +1170,36 @@ static int __devinit blackbird_probe(struct pci_dev *pci_dev, dev->height = 576; } - err = cx8802_init_common(dev); - if (0 != err) - goto fail_free; - /* blackbird stuff */ printk("%s/2: cx23416 based mpeg encoder (blackbird reference design)\n", core->name); host_setup(dev->core); - list_add_tail(&dev->devlist,&cx8802_devlist); blackbird_register_video(dev); /* initial device configuration: needed ? */ return 0; - fail_free: - kfree(dev); fail_core: - cx88_core_put(core,pci_dev); return err; } -static void __devexit blackbird_remove(struct pci_dev *pci_dev) +static int cx8802_blackbird_remove(struct cx8802_driver *drv) { - struct cx8802_dev *dev = pci_get_drvdata(pci_dev); - /* blackbird */ - blackbird_unregister_video(dev); - list_del(&dev->devlist); + blackbird_unregister_video(drv->core->dvbdev); - /* common */ - cx8802_fini_common(dev); - cx88_core_put(dev->core,dev->pci); - kfree(dev); + return 0; } -static struct pci_device_id cx8802_pci_tbl[] = { - { - .vendor = 0x14f1, - .device = 0x8802, - .subvendor = PCI_ANY_ID, - .subdevice = PCI_ANY_ID, - },{ - /* --- end of list --- */ - } -}; -MODULE_DEVICE_TABLE(pci, cx8802_pci_tbl); - -static struct pci_driver blackbird_pci_driver = { - .name = "cx88-blackbird", - .id_table = cx8802_pci_tbl, - .probe = blackbird_probe, - .remove = __devexit_p(blackbird_remove), -#ifdef CONFIG_PM - .suspend = cx8802_suspend_common, - .resume = cx8802_resume_common, -#endif +static struct cx8802_driver cx8802_blackbird_driver = { + .type_id = CX88_MPEG_BLACKBIRD, + .hw_access = CX8802_DRVCTL_SHARED, + .probe = cx8802_blackbird_probe, + .remove = cx8802_blackbird_remove, + .advise_acquire = cx8802_blackbird_advise_acquire, + .advise_release = cx8802_blackbird_advise_release, }; static int blackbird_init(void) @@ -1176,17 +1212,22 @@ static int blackbird_init(void) printk(KERN_INFO "cx2388x: snapshot date %04d-%02d-%02d\n", SNAPSHOT/10000, (SNAPSHOT/100)%100, SNAPSHOT%100); #endif - return pci_register_driver(&blackbird_pci_driver); + cx88_ioctl_hook = mpeg_do_ioctl; + cx88_ioctl_translator = mpeg_translate_ioctl; + return cx8802_register_driver(&cx8802_blackbird_driver); } static void blackbird_fini(void) { - pci_unregister_driver(&blackbird_pci_driver); + cx8802_unregister_driver(&cx8802_blackbird_driver); } module_init(blackbird_init); module_exit(blackbird_fini); +EXPORT_SYMBOL(cx88_ioctl_hook); +EXPORT_SYMBOL(cx88_ioctl_translator); + /* ----------------------------------------------------------- */ /* * Local variables: diff --git a/drivers/media/video/cx88/cx88-cards.c b/drivers/media/video/cx88/cx88-cards.c index f764a57c56b..c791708b133 100644 --- a/drivers/media/video/cx88/cx88-cards.c +++ b/drivers/media/video/cx88/cx88-cards.c @@ -281,18 +281,22 @@ struct cx88_board cx88_boards[] = { .type = CX88_VMUX_TELEVISION, .vmux = 0, .gpio0 = 0x0000bde2, + .extadc = 1, },{ .type = CX88_VMUX_COMPOSITE1, .vmux = 1, .gpio0 = 0x0000bde6, + .extadc = 1, },{ .type = CX88_VMUX_SVIDEO, .vmux = 2, .gpio0 = 0x0000bde6, + .extadc = 1, }}, .radio = { .type = CX88_RADIO, .gpio0 = 0x0000bd62, + .extadc = 1, }, .mpeg = CX88_MPEG_BLACKBIRD, }, @@ -353,6 +357,7 @@ struct cx88_board cx88_boards[] = { .type = CX88_VMUX_SVIDEO, .vmux = 2, .gpio0 = 0x0000fde6, // 0x0000fda6 L,R RCA audio in? + .extadc = 1, }}, .radio = { .type = CX88_RADIO, @@ -523,6 +528,7 @@ struct cx88_board cx88_boards[] = { .input = {{ .type = CX88_VMUX_TELEVISION, .vmux = 0, + .extadc = 1, }}, .mpeg = CX88_MPEG_BLACKBIRD, }, @@ -646,18 +652,22 @@ struct cx88_board cx88_boards[] = { .type = CX88_VMUX_TELEVISION, .vmux = 0, .gpio0 = 0x00009d80, + .extadc = 1, },{ .type = CX88_VMUX_COMPOSITE1, .vmux = 1, .gpio0 = 0x00009d76, + .extadc = 1, },{ .type = CX88_VMUX_SVIDEO, .vmux = 2, .gpio0 = 0x00009d76, + .extadc = 1, }}, .radio = { .type = CX88_RADIO, .gpio0 = 0x00009d00, + .extadc = 1, }, .mpeg = CX88_MPEG_BLACKBIRD, }, @@ -786,25 +796,29 @@ struct cx88_board cx88_boards[] = { .tuner_addr = ADDR_UNSET, .radio_addr = ADDR_UNSET, .tda9887_conf = TDA9887_PRESENT, - .mpeg = CX88_MPEG_BLACKBIRD, .input = {{ .type = CX88_VMUX_COMPOSITE1, .vmux = 0, .gpio0 = 0x0000cd73, + .extadc = 1, },{ .type = CX88_VMUX_SVIDEO, .vmux = 1, .gpio0 = 0x0000cd73, + .extadc = 1, },{ .type = CX88_VMUX_TELEVISION, .vmux = 3, .gpio0 = 0x0000cdb3, + .extadc = 1, }}, .radio = { .type = CX88_RADIO, .vmux = 2, .gpio0 = 0x0000cdf3, + .extadc = 1, }, + .mpeg = CX88_MPEG_BLACKBIRD, }, [CX88_BOARD_KWORLD_VSTREAM_EXPERT_DVD] = { /* Alexander Wold <awold@bigfoot.com> */ @@ -1050,7 +1064,6 @@ struct cx88_board cx88_boards[] = { .mpeg = CX88_MPEG_DVB, }, [CX88_BOARD_KWORLD_HARDWARE_MPEG_TV_XPERT] = { - /* FIXME: Audio not working for s-video / composite inputs. */ .name = "KWorld HardwareMpegTV XPert", .tuner_type = TUNER_PHILIPS_TDA8290, .radio_type = UNSET, @@ -1065,10 +1078,12 @@ struct cx88_board cx88_boards[] = { .type = CX88_VMUX_COMPOSITE1, .vmux = 1, .gpio0 = 0x3de6, + .extadc = 1, },{ .type = CX88_VMUX_SVIDEO, .vmux = 2, .gpio0 = 0x3de6, + .extadc = 1, }}, .radio = { .type = CX88_RADIO, @@ -1252,35 +1267,35 @@ struct cx88_board cx88_boards[] = { .gpio0 = 0x070b, }}, }, - [CX88_BOARD_TE_DTV_250_OEM_SWANN] = { - .name = "Shenzhen Tungsten Ages Tech TE-DTV-250 / Swann OEM", - .tuner_type = TUNER_LG_PAL_NEW_TAPC, - .radio_type = UNSET, - .tuner_addr = ADDR_UNSET, - .radio_addr = ADDR_UNSET, - .input = {{ - .type = CX88_VMUX_TELEVISION, - .vmux = 0, - .gpio0 = 0x003fffff, - .gpio1 = 0x00e00000, - .gpio2 = 0x003fffff, - .gpio3 = 0x02000000, - },{ - .type = CX88_VMUX_COMPOSITE1, - .vmux = 1, - .gpio0 = 0x003fffff, - .gpio1 = 0x00e00000, - .gpio2 = 0x003fffff, - .gpio3 = 0x02000000, - },{ - .type = CX88_VMUX_SVIDEO, - .vmux = 2, - .gpio0 = 0x003fffff, - .gpio1 = 0x00e00000, - .gpio2 = 0x003fffff, - .gpio3 = 0x02000000, - }}, - }, + [CX88_BOARD_TE_DTV_250_OEM_SWANN] = { + .name = "Shenzhen Tungsten Ages Tech TE-DTV-250 / Swann OEM", + .tuner_type = TUNER_LG_PAL_NEW_TAPC, + .radio_type = UNSET, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .input = {{ + .type = CX88_VMUX_TELEVISION, + .vmux = 0, + .gpio0 = 0x003fffff, + .gpio1 = 0x00e00000, + .gpio2 = 0x003fffff, + .gpio3 = 0x02000000, + },{ + .type = CX88_VMUX_COMPOSITE1, + .vmux = 1, + .gpio0 = 0x003fffff, + .gpio1 = 0x00e00000, + .gpio2 = 0x003fffff, + .gpio3 = 0x02000000, + },{ + .type = CX88_VMUX_SVIDEO, + .vmux = 2, + .gpio0 = 0x003fffff, + .gpio1 = 0x00e00000, + .gpio2 = 0x003fffff, + .gpio3 = 0x02000000, + }}, + }, [CX88_BOARD_HAUPPAUGE_HVR1300] = { .name = "Hauppauge WinTV-HVR1300 DVB-T/Hybrid MPEG Encoder", .tuner_type = TUNER_PHILIPS_FMD1216ME_MK3, @@ -1293,17 +1308,20 @@ struct cx88_board cx88_boards[] = { .type = CX88_VMUX_TELEVISION, .vmux = 0, .gpio0 = 0xe780, + .extadc = 1, },{ .type = CX88_VMUX_COMPOSITE1, .vmux = 1, .gpio0 = 0xe780, + .extadc = 1, },{ .type = CX88_VMUX_SVIDEO, .vmux = 2, .gpio0 = 0xe780, + .extadc = 1, }}, /* fixme: Add radio support */ - .mpeg = CX88_MPEG_DVB, + .mpeg = CX88_MPEG_DVB | CX88_MPEG_BLACKBIRD, }, }; const unsigned int cx88_bcount = ARRAY_SIZE(cx88_boards); @@ -1513,6 +1531,10 @@ struct cx88_subid cx88_subids[] = { },{ .subvendor = 0x17de, .subdevice = 0x0840, + .card = CX88_BOARD_KWORLD_HARDWARE_MPEG_TV_XPERT, + },{ + .subvendor = 0x1421, + .subdevice = 0x0305, .card = CX88_BOARD_KWORLD_HARDWARE_MPEG_TV_XPERT, },{ .subvendor = 0x18ac, diff --git a/drivers/media/video/cx88/cx88-core.c b/drivers/media/video/cx88/cx88-core.c index 4b655f2ef27..453af5e943f 100644 --- a/drivers/media/video/cx88/cx88-core.c +++ b/drivers/media/video/cx88/cx88-core.c @@ -1153,7 +1153,7 @@ void cx88_core_put(struct cx88_core *core, struct pci_dev *pci) mutex_lock(&devlist); cx88_ir_fini(core); if (0 == core->i2c_rc) - i2c_bit_del_bus(&core->i2c_adap); + i2c_del_adapter(&core->i2c_adap); list_del(&core->devlist); iounmap(core->lmmio); cx88_devcount--; diff --git a/drivers/media/video/cx88/cx88-dvb.c b/drivers/media/video/cx88/cx88-dvb.c index 0ef13e7efa2..8b203354fcc 100644 --- a/drivers/media/video/cx88/cx88-dvb.c +++ b/drivers/media/video/cx88/cx88-dvb.c @@ -42,7 +42,7 @@ #include "cx22702.h" #include "or51132.h" #include "lgdt330x.h" -#include "lg_h06xf.h" +#include "lgh06xf.h" #include "nxt200x.h" #include "cx24123.h" #include "isl6421.h" @@ -57,7 +57,7 @@ module_param(debug, int, 0644); MODULE_PARM_DESC(debug,"enable debug messages [dvb]"); #define dprintk(level,fmt, arg...) if (debug >= level) \ - printk(KERN_DEBUG "%s/2-dvb: " fmt, dev->core->name , ## arg) + printk(KERN_DEBUG "%s/2-dvb: " fmt, core->name, ## arg) /* ------------------------------------------------------------------ */ @@ -74,8 +74,8 @@ static int dvb_buf_setup(struct videobuf_queue *q, return 0; } -static int dvb_buf_prepare(struct videobuf_queue *q, struct videobuf_buffer *vb, - enum v4l2_field field) +static int dvb_buf_prepare(struct videobuf_queue *q, + struct videobuf_buffer *vb, enum v4l2_field field) { struct cx8802_dev *dev = q->priv_data; return cx8802_buf_prepare(q, dev, (struct cx88_buffer*)vb,field); @@ -87,7 +87,8 @@ static void dvb_buf_queue(struct videobuf_queue *q, struct videobuf_buffer *vb) cx8802_buf_queue(dev, (struct cx88_buffer*)vb); } -static void dvb_buf_release(struct videobuf_queue *q, struct videobuf_buffer *vb) +static void dvb_buf_release(struct videobuf_queue *q, + struct videobuf_buffer *vb) { cx88_free_buffer(q, (struct cx88_buffer*)vb); } @@ -100,6 +101,26 @@ static struct videobuf_queue_ops dvb_qops = { }; /* ------------------------------------------------------------------ */ + +static int cx88_dvb_bus_ctrl(struct dvb_frontend* fe, int acquire) +{ + struct cx8802_dev *dev= fe->dvb->priv; + struct cx8802_driver *drv = NULL; + int ret = 0; + + drv = cx8802_get_driver(dev, CX88_MPEG_DVB); + if (drv) { + if (acquire) + ret = drv->request_acquire(drv); + else + ret = drv->request_release(drv); + } + + return ret; +} + +/* ------------------------------------------------------------------ */ + static int dvico_fusionhdtv_demod_init(struct dvb_frontend* fe) { static u8 clock_config [] = { CLOCK_CTL, 0x38, 0x39 }; @@ -268,35 +289,6 @@ static struct mt352_config dntv_live_dvbt_pro_config = { }; #endif -static int dvico_hybrid_tuner_set_params(struct dvb_frontend *fe, - struct dvb_frontend_parameters *params) -{ - u8 pllbuf[4]; - struct cx8802_dev *dev= fe->dvb->priv; - struct i2c_msg msg = - { .addr = dev->core->pll_addr, .flags = 0, - .buf = pllbuf, .len = 4 }; - int err; - - dvb_pll_configure(dev->core->pll_desc, pllbuf, - params->frequency, - params->u.ofdm.bandwidth); - - if (fe->ops.i2c_gate_ctrl) - fe->ops.i2c_gate_ctrl(fe, 1); - if ((err = i2c_transfer(&dev->core->i2c_adap, &msg, 1)) != 1) { - printk(KERN_WARNING "cx88-dvb: %s error " - "(addr %02x <- %02x, err = %i)\n", - __FUNCTION__, pllbuf[0], pllbuf[1], err); - if (err < 0) - return err; - else - return -EREMOTEIO; - } - - return 0; -} - static struct zl10353_config dvico_fusionhdtv_hybrid = { .demod_address = 0x0f, .no_tuner = 1, @@ -311,28 +303,12 @@ static struct cx22702_config connexant_refboard_config = { .output_mode = CX22702_SERIAL_OUTPUT, }; -static struct cx22702_config hauppauge_novat_config = { - .demod_address = 0x43, - .output_mode = CX22702_SERIAL_OUTPUT, -}; - -static struct cx22702_config hauppauge_hvr1100_config = { +static struct cx22702_config hauppauge_hvr_config = { .demod_address = 0x63, .output_mode = CX22702_SERIAL_OUTPUT, }; -static struct cx22702_config hauppauge_hvr1300_config = { - .demod_address = 0x63, - .output_mode = CX22702_SERIAL_OUTPUT, -}; - -static struct cx22702_config hauppauge_hvr3000_config = { - .demod_address = 0x63, - .output_mode = CX22702_SERIAL_OUTPUT, -}; - -static int or51132_set_ts_param(struct dvb_frontend* fe, - int is_punctured) +static int or51132_set_ts_param(struct dvb_frontend* fe, int is_punctured) { struct cx8802_dev *dev= fe->dvb->priv; dev->ts_gen_cntrl = is_punctured ? 0x04 : 0x00; @@ -344,50 +320,6 @@ static struct or51132_config pchdtv_hd3000 = { .set_ts_params = or51132_set_ts_param, }; -static int lgdt3302_tuner_set_params(struct dvb_frontend* fe, - struct dvb_frontend_parameters* params) -{ - /* FIXME make this routine use the tuner-simple code. - * It could probably be shared with a number of ATSC - * frontends. Many share the same tuner with analog TV. */ - - struct cx8802_dev *dev= fe->dvb->priv; - struct cx88_core *core = dev->core; - u8 buf[4]; - struct i2c_msg msg = - { .addr = dev->core->pll_addr, .flags = 0, .buf = buf, .len = 4 }; - int err; - - dvb_pll_configure(core->pll_desc, buf, params->frequency, 0); - dprintk(1, "%s: tuner at 0x%02x bytes: 0x%02x 0x%02x 0x%02x 0x%02x\n", - __FUNCTION__, msg.addr, buf[0],buf[1],buf[2],buf[3]); - - if (fe->ops.i2c_gate_ctrl) - fe->ops.i2c_gate_ctrl(fe, 1); - if ((err = i2c_transfer(&core->i2c_adap, &msg, 1)) != 1) { - printk(KERN_WARNING "cx88-dvb: %s error " - "(addr %02x <- %02x, err = %i)\n", - __FUNCTION__, buf[0], buf[1], err); - if (err < 0) - return err; - else - return -EREMOTEIO; - } - return 0; -} - -static int lgdt3303_tuner_set_params(struct dvb_frontend* fe, - struct dvb_frontend_parameters* params) -{ - struct cx8802_dev *dev= fe->dvb->priv; - struct cx88_core *core = dev->core; - - /* Put the analog decoder in standby to keep it quiet */ - cx88_call_i2c_clients (dev->core, TUNER_SET_STANDBY, NULL); - - return lg_h06xf_pll_set(fe, &core->i2c_adap, params); -} - static int lgdt330x_pll_rf_set(struct dvb_frontend* fe, int index) { struct cx8802_dev *dev= fe->dvb->priv; @@ -432,8 +364,7 @@ static struct lgdt330x_config pchdtv_hd5500 = { .set_ts_params = lgdt330x_set_ts_param, }; -static int nxt200x_set_ts_param(struct dvb_frontend* fe, - int is_punctured) +static int nxt200x_set_ts_param(struct dvb_frontend* fe, int is_punctured) { struct cx8802_dev *dev= fe->dvb->priv; dev->ts_gen_cntrl = is_punctured ? 0x04 : 0x00; @@ -469,11 +400,10 @@ static int kworld_dvbs_100_set_voltage(struct dvb_frontend* fe, struct cx8802_dev *dev= fe->dvb->priv; struct cx88_core *core = dev->core; - if (voltage == SEC_VOLTAGE_OFF) { + if (voltage == SEC_VOLTAGE_OFF) cx_write(MO_GP0_IO, 0x000006fb); - } else { + else cx_write(MO_GP0_IO, 0x000006f9); - } if (core->prev_set_voltage) return core->prev_set_voltage(fe, voltage); @@ -522,7 +452,7 @@ static int dvb_register(struct cx8802_dev *dev) switch (dev->core->board) { case CX88_BOARD_HAUPPAUGE_DVB_T1: dev->dvb.frontend = dvb_attach(cx22702_attach, - &hauppauge_novat_config, + &connexant_refboard_config, &dev->core->i2c_adap); if (dev->dvb.frontend != NULL) { dvb_attach(dvb_pll_attach, dev->dvb.frontend, 0x61, @@ -547,32 +477,11 @@ static int dvb_register(struct cx8802_dev *dev) case CX88_BOARD_HAUPPAUGE_HVR1100: case CX88_BOARD_HAUPPAUGE_HVR1100LP: dev->dvb.frontend = dvb_attach(cx22702_attach, - &hauppauge_hvr1100_config, - &dev->core->i2c_adap); - if (dev->dvb.frontend != NULL) { - dvb_attach(dvb_pll_attach, dev->dvb.frontend, 0x61, - &dev->core->i2c_adap, - &dvb_pll_fmd1216me); - } - break; - case CX88_BOARD_HAUPPAUGE_HVR1300: - dev->dvb.frontend = dvb_attach(cx22702_attach, - &hauppauge_hvr1300_config, - &dev->core->i2c_adap); - if (dev->dvb.frontend != NULL) { - dvb_attach(dvb_pll_attach, dev->dvb.frontend, 0x61, - &dev->core->i2c_adap, - &dvb_pll_fmd1216me); - } - break; - case CX88_BOARD_HAUPPAUGE_HVR3000: - dev->dvb.frontend = dvb_attach(cx22702_attach, - &hauppauge_hvr3000_config, + &hauppauge_hvr_config, &dev->core->i2c_adap); if (dev->dvb.frontend != NULL) { dvb_attach(dvb_pll_attach, dev->dvb.frontend, 0x61, - &dev->core->i2c_adap, - &dvb_pll_fmd1216me); + &dev->core->i2c_adap, &dvb_pll_fmd1216me); } break; case CX88_BOARD_DVICO_FUSIONHDTV_DVB_T_PLUS: @@ -647,18 +556,17 @@ static int dvb_register(struct cx8802_dev *dev) #endif break; case CX88_BOARD_DVICO_FUSIONHDTV_DVB_T_HYBRID: - dev->core->pll_addr = 0x61; - dev->core->pll_desc = &dvb_pll_thomson_fe6600; dev->dvb.frontend = dvb_attach(zl10353_attach, &dvico_fusionhdtv_hybrid, &dev->core->i2c_adap); if (dev->dvb.frontend != NULL) { - dev->dvb.frontend->ops.tuner_ops.set_params = dvico_hybrid_tuner_set_params; + dvb_attach(dvb_pll_attach, dev->dvb.frontend, 0x61, + &dev->core->i2c_adap, + &dvb_pll_thomson_fe6600); } break; case CX88_BOARD_PCHDTV_HD3000: - dev->dvb.frontend = dvb_attach(or51132_attach, - &pchdtv_hd3000, + dev->dvb.frontend = dvb_attach(or51132_attach, &pchdtv_hd3000, &dev->core->i2c_adap); if (dev->dvb.frontend != NULL) { dvb_attach(dvb_pll_attach, dev->dvb.frontend, 0x61, @@ -679,13 +587,13 @@ static int dvb_register(struct cx8802_dev *dev) /* Select RF connector callback */ fusionhdtv_3_gold.pll_rf_set = lgdt330x_pll_rf_set; - dev->core->pll_addr = 0x61; - dev->core->pll_desc = &dvb_pll_microtune_4042; dev->dvb.frontend = dvb_attach(lgdt330x_attach, &fusionhdtv_3_gold, &dev->core->i2c_adap); if (dev->dvb.frontend != NULL) { - dev->dvb.frontend->ops.tuner_ops.set_params = lgdt3302_tuner_set_params; + dvb_attach(dvb_pll_attach, dev->dvb.frontend, 0x61, + &dev->core->i2c_adap, + &dvb_pll_microtune_4042); } } break; @@ -699,13 +607,13 @@ static int dvb_register(struct cx8802_dev *dev) mdelay(100); cx_set(MO_GP0_IO, 9); mdelay(200); - dev->core->pll_addr = 0x61; - dev->core->pll_desc = &dvb_pll_thomson_dtt761x; dev->dvb.frontend = dvb_attach(lgdt330x_attach, &fusionhdtv_3_gold, &dev->core->i2c_adap); if (dev->dvb.frontend != NULL) { - dev->dvb.frontend->ops.tuner_ops.set_params = lgdt3302_tuner_set_params; + dvb_attach(dvb_pll_attach, dev->dvb.frontend, 0x61, + &dev->core->i2c_adap, + &dvb_pll_thomson_dtt761x); } } break; @@ -723,7 +631,8 @@ static int dvb_register(struct cx8802_dev *dev) &fusionhdtv_5_gold, &dev->core->i2c_adap); if (dev->dvb.frontend != NULL) { - dev->dvb.frontend->ops.tuner_ops.set_params = lgdt3303_tuner_set_params; + dvb_attach(lgh06xf_attach, dev->dvb.frontend, + &dev->core->i2c_adap); } } break; @@ -741,7 +650,8 @@ static int dvb_register(struct cx8802_dev *dev) &pchdtv_hd5500, &dev->core->i2c_adap); if (dev->dvb.frontend != NULL) { - dev->dvb.frontend->ops.tuner_ops.set_params = lgdt3303_tuner_set_params; + dvb_attach(lgh06xf_attach, dev->dvb.frontend, + &dev->core->i2c_adap); } } break; @@ -782,6 +692,24 @@ static int dvb_register(struct cx8802_dev *dev) dev->dvb.frontend->ops.set_voltage = geniatech_dvbs_set_voltage; } break; + case CX88_BOARD_HAUPPAUGE_HVR1300: + dev->dvb.frontend = dvb_attach(cx22702_attach, + &hauppauge_hvr_config, + &dev->core->i2c_adap); + if (dev->dvb.frontend != NULL) { + dvb_attach(dvb_pll_attach, dev->dvb.frontend, 0x61, + &dev->core->i2c_adap, &dvb_pll_fmd1216me); + } + break; + case CX88_BOARD_HAUPPAUGE_HVR3000: + dev->dvb.frontend = dvb_attach(cx22702_attach, + &hauppauge_hvr_config, + &dev->core->i2c_adap); + if (dev->dvb.frontend != NULL) { + dvb_attach(dvb_pll_attach, dev->dvb.frontend, 0x61, + &dev->core->i2c_adap, &dvb_pll_fmd1216me); + } + break; default: printk("%s: The frontend of your DVB/ATSC card isn't supported yet\n", dev->core->name); @@ -796,6 +724,8 @@ static int dvb_register(struct cx8802_dev *dev) dev->dvb.frontend->ops.info.frequency_min = dev->core->pll_desc->min; dev->dvb.frontend->ops.info.frequency_max = dev->core->pll_desc->max; } + /* Ensure all frontends negotiate bus access */ + dev->dvb.frontend->ops.ts_bus_ctrl = cx88_dvb_bus_ctrl; /* Put the analog decoder in standby to keep it quiet */ cx88_call_i2c_clients (dev->core, TUNER_SET_STANDBY, NULL); @@ -806,37 +736,67 @@ static int dvb_register(struct cx8802_dev *dev) /* ----------------------------------------------------------- */ -static int __devinit dvb_probe(struct pci_dev *pci_dev, - const struct pci_device_id *pci_id) +/* CX8802 MPEG -> mini driver - We have been given the hardware */ +static int cx8802_dvb_advise_acquire(struct cx8802_driver *drv) { - struct cx8802_dev *dev; - struct cx88_core *core; + struct cx88_core *core = drv->core; + int err = 0; + dprintk( 1, "%s\n", __FUNCTION__); + + switch (core->board) { + case CX88_BOARD_HAUPPAUGE_HVR1300: + /* We arrive here with either the cx23416 or the cx22702 + * on the bus. Take the bus from the cx23416 and enable the + * cx22702 demod + */ + cx_set(MO_GP0_IO, 0x00000080); /* cx22702 out of reset and enable */ + cx_clear(MO_GP0_IO, 0x00000004); + udelay(1000); + break; + default: + err = -ENODEV; + } + return err; +} + +/* CX8802 MPEG -> mini driver - We no longer have the hardware */ +static int cx8802_dvb_advise_release(struct cx8802_driver *drv) +{ + struct cx88_core *core = drv->core; + int err = 0; + dprintk( 1, "%s\n", __FUNCTION__); + + switch (core->board) { + case CX88_BOARD_HAUPPAUGE_HVR1300: + /* Do Nothing, leave the cx22702 on the bus. */ + break; + default: + err = -ENODEV; + } + return err; +} + +static int cx8802_dvb_probe(struct cx8802_driver *drv) +{ + struct cx88_core *core = drv->core; + struct cx8802_dev *dev = drv->core->dvbdev; int err; - /* general setup */ - core = cx88_core_get(pci_dev); - if (NULL == core) - return -EINVAL; + dprintk( 1, "%s\n", __FUNCTION__); + dprintk( 1, " ->being probed by Card=%d Name=%s, PCI %02x:%02x\n", + core->board, + core->name, + core->pci_bus, + core->pci_slot); err = -ENODEV; if (!(cx88_boards[core->board].mpeg & CX88_MPEG_DVB)) goto fail_core; - err = -ENOMEM; - dev = kzalloc(sizeof(*dev),GFP_KERNEL); - if (NULL == dev) - goto fail_core; - dev->pci = pci_dev; - dev->core = core; - - err = cx8802_init_common(dev); - if (0 != err) - goto fail_free; - #ifdef HAVE_VP3054_I2C err = vp3054_i2c_probe(dev); if (0 != err) - goto fail_free; + goto fail_core; #endif /* dvb stuff */ @@ -848,28 +808,16 @@ static int __devinit dvb_probe(struct pci_dev *pci_dev, sizeof(struct cx88_buffer), dev); err = dvb_register(dev); - if (0 != err) - goto fail_fini; + if (err != 0) + printk("%s dvb_register failed err = %d\n", __FUNCTION__, err); - /* Maintain a reference to cx88-video can query the 8802 device. */ - core->dvbdev = dev; - return 0; - - fail_fini: - cx8802_fini_common(dev); - fail_free: - kfree(dev); fail_core: - cx88_core_put(core,pci_dev); return err; } -static void __devexit dvb_remove(struct pci_dev *pci_dev) +static int cx8802_dvb_remove(struct cx8802_driver *drv) { - struct cx8802_dev *dev = pci_get_drvdata(pci_dev); - - /* Destroy any 8802 reference. */ - dev->core->dvbdev = NULL; + struct cx8802_dev *dev = drv->core->dvbdev; /* dvb */ videobuf_dvb_unregister(&dev->dvb); @@ -878,33 +826,16 @@ static void __devexit dvb_remove(struct pci_dev *pci_dev) vp3054_i2c_remove(dev); #endif - /* common */ - cx8802_fini_common(dev); - cx88_core_put(dev->core,dev->pci); - kfree(dev); + return 0; } -static struct pci_device_id cx8802_pci_tbl[] = { - { - .vendor = 0x14f1, - .device = 0x8802, - .subvendor = PCI_ANY_ID, - .subdevice = PCI_ANY_ID, - },{ - /* --- end of list --- */ - } -}; -MODULE_DEVICE_TABLE(pci, cx8802_pci_tbl); - -static struct pci_driver dvb_pci_driver = { - .name = "cx88-dvb", - .id_table = cx8802_pci_tbl, - .probe = dvb_probe, - .remove = __devexit_p(dvb_remove), -#ifdef CONFIG_PM - .suspend = cx8802_suspend_common, - .resume = cx8802_resume_common, -#endif +static struct cx8802_driver cx8802_dvb_driver = { + .type_id = CX88_MPEG_DVB, + .hw_access = CX8802_DRVCTL_SHARED, + .probe = cx8802_dvb_probe, + .remove = cx8802_dvb_remove, + .advise_acquire = cx8802_dvb_advise_acquire, + .advise_release = cx8802_dvb_advise_release, }; static int dvb_init(void) @@ -917,12 +848,12 @@ static int dvb_init(void) printk(KERN_INFO "cx2388x: snapshot date %04d-%02d-%02d\n", SNAPSHOT/10000, (SNAPSHOT/100)%100, SNAPSHOT%100); #endif - return pci_register_driver(&dvb_pci_driver); + return cx8802_register_driver(&cx8802_dvb_driver); } static void dvb_fini(void) { - pci_unregister_driver(&dvb_pci_driver); + cx8802_unregister_driver(&cx8802_dvb_driver); } module_init(dvb_init); diff --git a/drivers/media/video/cx88/cx88-input.c b/drivers/media/video/cx88/cx88-input.c index ee48995a4ab..8136673fe9e 100644 --- a/drivers/media/video/cx88/cx88-input.c +++ b/drivers/media/video/cx88/cx88-input.c @@ -145,9 +145,9 @@ static void ir_timer(unsigned long data) schedule_work(&ir->work); } -static void cx88_ir_work(void *data) +static void cx88_ir_work(struct work_struct *work) { - struct cx88_IR *ir = data; + struct cx88_IR *ir = container_of(work, struct cx88_IR, work); unsigned long timeout; cx88_ir_handle_key(ir); @@ -155,6 +155,35 @@ static void cx88_ir_work(void *data) mod_timer(&ir->timer, timeout); } +static void cx88_ir_start(struct cx88_core *core, struct cx88_IR *ir) +{ + if (ir->polling) { + INIT_WORK(&ir->work, cx88_ir_work); + init_timer(&ir->timer); + ir->timer.function = ir_timer; + ir->timer.data = (unsigned long)ir; + schedule_work(&ir->work); + } + if (ir->sampling) { + core->pci_irqmask |= (1 << 18); /* IR_SMP_INT */ + cx_write(MO_DDS_IO, 0xa80a80); /* 4 kHz sample rate */ + cx_write(MO_DDSCFG_IO, 0x5); /* enable */ + } +} + +static void cx88_ir_stop(struct cx88_core *core, struct cx88_IR *ir) +{ + if (ir->sampling) { + cx_write(MO_DDSCFG_IO, 0x0); + core->pci_irqmask &= ~(1 << 18); + } + + if (ir->polling) { + del_timer_sync(&ir->timer); + flush_scheduled_work(); + } +} + /* ---------------------------------------------------------------------- */ int cx88_ir_init(struct cx88_core *core, struct pci_dev *pci) @@ -163,14 +192,12 @@ int cx88_ir_init(struct cx88_core *core, struct pci_dev *pci) struct input_dev *input_dev; IR_KEYTAB_TYPE *ir_codes = NULL; int ir_type = IR_TYPE_OTHER; + int err = -ENOMEM; ir = kzalloc(sizeof(*ir), GFP_KERNEL); input_dev = input_allocate_device(); - if (!ir || !input_dev) { - kfree(ir); - input_free_device(input_dev); - return -ENOMEM; - } + if (!ir || !input_dev) + goto err_out_free; ir->input = input_dev; @@ -202,13 +229,19 @@ int cx88_ir_init(struct cx88_core *core, struct pci_dev *pci) ir->sampling = 1; break; case CX88_BOARD_WINFAST_DTV2000H: - case CX88_BOARD_WINFAST2000XP_EXPERT: ir_codes = ir_codes_winfast; ir->gpio_addr = MO_GP0_IO; ir->mask_keycode = 0x8f8; ir->mask_keyup = 0x100; ir->polling = 50; /* ms */ break; + case CX88_BOARD_WINFAST2000XP_EXPERT: + ir_codes = ir_codes_winfast; + ir->gpio_addr = MO_GP0_IO; + ir->mask_keycode = 0x8f8; + ir->mask_keyup = 0x100; + ir->polling = 1; /* ms */ + break; case CX88_BOARD_IODATA_GVBCTV7E: ir_codes = ir_codes_iodata_bctv7e; ir->gpio_addr = MO_GP0_IO; @@ -216,7 +249,7 @@ int cx88_ir_init(struct cx88_core *core, struct pci_dev *pci) ir->mask_keydown = 0x02; ir->polling = 5; /* ms */ break; - case CX88_BOARD_PROLINK_PLAYTVPVR: + case CX88_BOARD_PROLINK_PLAYTVPVR: case CX88_BOARD_PIXELVIEW_PLAYTV_ULTRA_PRO: ir_codes = ir_codes_pixelview; ir->gpio_addr = MO_GP1_IO; @@ -274,9 +307,8 @@ int cx88_ir_init(struct cx88_core *core, struct pci_dev *pci) } if (NULL == ir_codes) { - kfree(ir); - input_free_device(input_dev); - return -ENODEV; + err = -ENODEV; + goto err_out_free; } /* init input device */ @@ -301,23 +333,22 @@ int cx88_ir_init(struct cx88_core *core, struct pci_dev *pci) ir->core = core; core->ir = ir; - if (ir->polling) { - INIT_WORK(&ir->work, cx88_ir_work, ir); - init_timer(&ir->timer); - ir->timer.function = ir_timer; - ir->timer.data = (unsigned long)ir; - schedule_work(&ir->work); - } - if (ir->sampling) { - core->pci_irqmask |= (1 << 18); /* IR_SMP_INT */ - cx_write(MO_DDS_IO, 0xa80a80); /* 4 kHz sample rate */ - cx_write(MO_DDSCFG_IO, 0x5); /* enable */ - } + cx88_ir_start(core, ir); /* all done */ - input_register_device(ir->input); + err = input_register_device(ir->input); + if (err) + goto err_out_stop; return 0; + + err_out_stop: + cx88_ir_stop(core, ir); + core->ir = NULL; + err_out_free: + input_free_device(input_dev); + kfree(ir); + return err; } int cx88_ir_fini(struct cx88_core *core) @@ -328,15 +359,7 @@ int cx88_ir_fini(struct cx88_core *core) if (NULL == ir) return 0; - if (ir->sampling) { - cx_write(MO_DDSCFG_IO, 0x0); - core->pci_irqmask &= ~(1 << 18); - } - if (ir->polling) { - del_timer(&ir->timer); - flush_scheduled_work(); - } - + cx88_ir_stop(core, ir); input_unregister_device(ir->input); kfree(ir); diff --git a/drivers/media/video/cx88/cx88-mpeg.c b/drivers/media/video/cx88/cx88-mpeg.c index 6b23a4e6f66..1fe1a833c7c 100644 --- a/drivers/media/video/cx88/cx88-mpeg.c +++ b/drivers/media/video/cx88/cx88-mpeg.c @@ -44,8 +44,12 @@ module_param(debug,int,0644); MODULE_PARM_DESC(debug,"enable debug messages [mpeg]"); #define dprintk(level,fmt, arg...) if (debug >= level) \ - printk(KERN_DEBUG "%s/2: " fmt, dev->core->name , ## arg) + printk(KERN_DEBUG "%s/2-mpeg: " fmt, dev->core->name, ## arg) +#define mpeg_dbg(level,fmt, arg...) if (debug >= level) \ + printk(KERN_DEBUG "%s/2-mpeg: " fmt, core->name, ## arg) + +static LIST_HEAD(cx8802_devlist); /* ------------------------------------------------------------------ */ static int cx8802_start_dma(struct cx8802_dev *dev, @@ -65,17 +69,13 @@ static int cx8802_start_dma(struct cx8802_dev *dev, /* FIXME: this needs a review. * also: move to cx88-blackbird + cx88-dvb source files? */ - if (cx88_boards[core->board].mpeg == (CX88_MPEG_DVB | CX88_MPEG_BLACKBIRD) ) { - /* Report a warning until the mini driver patch is applied, - * else the following conditions will set the dma registers incorrectly. - * This will be removed in the next major patch and changes to the conditions - * will be made. - */ - printk(KERN_INFO "%s() board->(CX88_MPEG_DVB | CX88_MPEG_BLACKBIRD) is invalid\n", __FUNCTION__); - return -EINVAL; - } - if (cx88_boards[core->board].mpeg & CX88_MPEG_DVB) { + dprintk( 1, "core->active_type_id = 0x%08x\n", core->active_type_id); + + if ( (core->active_type_id == CX88_MPEG_DVB) && + (cx88_boards[core->board].mpeg & CX88_MPEG_DVB) ) { + + dprintk( 1, "cx8802_start_dma doing .dvb\n"); /* negedge driven & software reset */ cx_write(TS_GEN_CNTRL, 0x0040 | dev->ts_gen_cntrl); udelay(100); @@ -93,15 +93,17 @@ static int cx8802_start_dma(struct cx8802_dev *dev, cx_write(MO_PINMUX_IO, 0x88); /* Enable MPEG parallel IO and video signal pins */ udelay(100); break; + case CX88_BOARD_HAUPPAUGE_HVR1300: + break; default: cx_write(TS_SOP_STAT, 0x00); break; } cx_write(TS_GEN_CNTRL, dev->ts_gen_cntrl); udelay(100); - } - - if (cx88_boards[core->board].mpeg & CX88_MPEG_BLACKBIRD) { + } else if ( (core->active_type_id == CX88_MPEG_BLACKBIRD) && + (cx88_boards[core->board].mpeg & CX88_MPEG_BLACKBIRD) ) { + dprintk( 1, "cx8802_start_dma doing .blackbird\n"); cx_write(MO_PINMUX_IO, 0x88); /* enable MPEG parallel IO */ cx_write(TS_GEN_CNTRL, 0x46); /* punctured clock TS & posedge driven & software reset */ @@ -112,6 +114,10 @@ static int cx8802_start_dma(struct cx8802_dev *dev, cx_write(TS_GEN_CNTRL, 0x06); /* punctured clock TS & posedge driven */ udelay(100); + } else { + printk( "%s() Failed. Unsupported value in .mpeg (0x%08x)\n", __FUNCTION__, + cx88_boards[core->board].mpeg ); + return -EINVAL; } /* reset counter */ @@ -542,8 +548,315 @@ int cx8802_resume_common(struct pci_dev *pci_dev) return 0; } +struct cx8802_dev * cx8802_get_device(struct inode *inode) +{ + int minor = iminor(inode); + struct cx8802_dev *h = NULL; + struct list_head *list; + + list_for_each(list,&cx8802_devlist) { + h = list_entry(list, struct cx8802_dev, devlist); + if (h->mpeg_dev->minor == minor) + return h; + } + + return NULL; +} + +struct cx8802_driver * cx8802_get_driver(struct cx8802_dev *dev, enum cx88_board_type btype) +{ + struct cx8802_dev *h = NULL; + struct cx8802_driver *d = NULL; + struct list_head *list; + struct list_head *list2; + + list_for_each(list,&cx8802_devlist) { + h = list_entry(list, struct cx8802_dev, devlist); + if (h != dev) + continue; + + list_for_each(list2, &h->drvlist.devlist) { + d = list_entry(list2, struct cx8802_driver, devlist); + + /* only unregister the correct driver type */ + if (d->type_id == btype) { + return d; + } + } + } + + return NULL; +} + +/* Driver asked for hardware access. */ +int cx8802_request_acquire(struct cx8802_driver *drv) +{ + struct cx88_core *core = drv->core; + + /* Fail a request for hardware if the device is busy. */ + if (core->active_type_id != CX88_BOARD_NONE) + return -EBUSY; + + if (drv->advise_acquire) + { + core->active_type_id = drv->type_id; + drv->advise_acquire(drv); + + mpeg_dbg(1,"%s() Post acquire GPIO=%x\n", __FUNCTION__, cx_read(MO_GP0_IO)); + } + + return 0; +} + +/* Driver asked to release hardware. */ +int cx8802_request_release(struct cx8802_driver *drv) +{ + struct cx88_core *core = drv->core; + + if (drv->advise_release) + { + drv->advise_release(drv); + core->active_type_id = CX88_BOARD_NONE; + mpeg_dbg(1,"%s() Post release GPIO=%x\n", __FUNCTION__, cx_read(MO_GP0_IO)); + } + + return 0; +} + +static int cx8802_check_driver(struct cx8802_driver *drv) +{ + if (drv == NULL) + return -ENODEV; + + if ((drv->type_id != CX88_MPEG_DVB) && + (drv->type_id != CX88_MPEG_BLACKBIRD)) + return -EINVAL; + + if ((drv->hw_access != CX8802_DRVCTL_SHARED) && + (drv->hw_access != CX8802_DRVCTL_EXCLUSIVE)) + return -EINVAL; + + if ((drv->probe == NULL) || + (drv->remove == NULL) || + (drv->advise_acquire == NULL) || + (drv->advise_release == NULL)) + return -EINVAL; + + return 0; +} + +int cx8802_register_driver(struct cx8802_driver *drv) +{ + struct cx8802_dev *h; + struct cx8802_driver *driver; + struct list_head *list; + int err = 0, i = 0; + + printk(KERN_INFO "%s() ->registering driver type=%s access=%s\n", __FUNCTION__ , + drv->type_id == CX88_MPEG_DVB ? "dvb" : "blackbird", + drv->hw_access == CX8802_DRVCTL_SHARED ? "shared" : "exclusive"); + + if ((err = cx8802_check_driver(drv)) != 0) { + printk(KERN_INFO "%s() cx8802_driver is invalid\n", __FUNCTION__ ); + return err; + } + + list_for_each(list,&cx8802_devlist) { + h = list_entry(list, struct cx8802_dev, devlist); + + printk(KERN_INFO "CORE %s: subsystem: %04x:%04x, board: %s [card=%d]\n", + h->core->name,h->pci->subsystem_vendor, + h->pci->subsystem_device,cx88_boards[h->core->board].name, + h->core->board); + + /* Bring up a new struct for each driver instance */ + driver = kzalloc(sizeof(*drv),GFP_KERNEL); + if (driver == NULL) + return -ENOMEM; + + /* Snapshot of the driver registration data */ + drv->core = h->core; + drv->suspend = cx8802_suspend_common; + drv->resume = cx8802_resume_common; + drv->request_acquire = cx8802_request_acquire; + drv->request_release = cx8802_request_release; + memcpy(driver, drv, sizeof(*driver)); + + err = drv->probe(driver); + if (err == 0) { + i++; + mutex_lock(&drv->core->lock); + list_add_tail(&driver->devlist,&h->drvlist.devlist); + mutex_unlock(&drv->core->lock); + } else { + printk(KERN_ERR "%s() ->probe failed err = %d\n", __FUNCTION__, err); + } + + } + if (i == 0) + err = -ENODEV; + else + err = 0; + + return err; +} + +int cx8802_unregister_driver(struct cx8802_driver *drv) +{ + struct cx8802_dev *h; + struct cx8802_driver *d; + struct list_head *list; + struct list_head *list2, *q; + int err = 0, i = 0; + + printk(KERN_INFO "%s() ->unregistering driver type=%s\n", __FUNCTION__ , + drv->type_id == CX88_MPEG_DVB ? "dvb" : "blackbird"); + + list_for_each(list,&cx8802_devlist) { + i++; + h = list_entry(list, struct cx8802_dev, devlist); + + printk(KERN_INFO "CORE %s: subsystem: %04x:%04x, board: %s [card=%d]\n", + h->core->name,h->pci->subsystem_vendor, + h->pci->subsystem_device,cx88_boards[h->core->board].name, + h->core->board); + + list_for_each_safe(list2, q, &h->drvlist.devlist) { + d = list_entry(list2, struct cx8802_driver, devlist); + + /* only unregister the correct driver type */ + if (d->type_id != drv->type_id) + continue; + + err = d->remove(d); + if (err == 0) { + mutex_lock(&drv->core->lock); + list_del(list2); + mutex_unlock(&drv->core->lock); + } else + printk(KERN_ERR "%s() ->remove failed err = %d\n", __FUNCTION__, err); + + } + + } + + return err; +} + /* ----------------------------------------------------------- */ +static int __devinit cx8802_probe(struct pci_dev *pci_dev, + const struct pci_device_id *pci_id) +{ + struct cx8802_dev *dev; + struct cx88_core *core; + int err; + + /* general setup */ + core = cx88_core_get(pci_dev); + if (NULL == core) + return -EINVAL; + printk("%s/2: cx2388x 8802 Driver Manager\n", core->name); + + err = -ENODEV; + if (!cx88_boards[core->board].mpeg) + goto fail_core; + + err = -ENOMEM; + dev = kzalloc(sizeof(*dev),GFP_KERNEL); + if (NULL == dev) + goto fail_core; + dev->pci = pci_dev; + dev->core = core; + + err = cx8802_init_common(dev); + if (err != 0) + goto fail_free; + + INIT_LIST_HEAD(&dev->drvlist.devlist); + list_add_tail(&dev->devlist,&cx8802_devlist); + + /* Maintain a reference so cx88-video can query the 8802 device. */ + core->dvbdev = dev; + return 0; + + fail_free: + kfree(dev); + fail_core: + cx88_core_put(core,pci_dev); + return err; +} + +static void __devexit cx8802_remove(struct pci_dev *pci_dev) +{ + struct cx8802_dev *dev; + struct cx8802_driver *h; + struct list_head *list; + + dev = pci_get_drvdata(pci_dev); + + dprintk( 1, "%s\n", __FUNCTION__); + + list_for_each(list,&dev->drvlist.devlist) { + h = list_entry(list, struct cx8802_driver, devlist); + dprintk( 1, " ->driver\n"); + if (h->remove == NULL) { + printk(KERN_ERR "%s .. skipping driver, no probe function\n", __FUNCTION__); + continue; + } + printk(KERN_INFO "%s .. Removing driver type %d\n", __FUNCTION__, h->type_id); + cx8802_unregister_driver(h); + list_del(&dev->drvlist.devlist); + } + + /* Destroy any 8802 reference. */ + dev->core->dvbdev = NULL; + + /* common */ + cx8802_fini_common(dev); + cx88_core_put(dev->core,dev->pci); + kfree(dev); +} + +static struct pci_device_id cx8802_pci_tbl[] = { + { + .vendor = 0x14f1, + .device = 0x8802, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + },{ + /* --- end of list --- */ + } +}; +MODULE_DEVICE_TABLE(pci, cx8802_pci_tbl); + +static struct pci_driver cx8802_pci_driver = { + .name = "cx88-mpeg driver manager", + .id_table = cx8802_pci_tbl, + .probe = cx8802_probe, + .remove = __devexit_p(cx8802_remove), +}; + +static int cx8802_init(void) +{ + printk(KERN_INFO "cx2388x cx88-mpeg Driver Manager version %d.%d.%d loaded\n", + (CX88_VERSION_CODE >> 16) & 0xff, + (CX88_VERSION_CODE >> 8) & 0xff, + CX88_VERSION_CODE & 0xff); +#ifdef SNAPSHOT + printk(KERN_INFO "cx2388x: snapshot date %04d-%02d-%02d\n", + SNAPSHOT/10000, (SNAPSHOT/100)%100, SNAPSHOT%100); +#endif + return pci_register_driver(&cx8802_pci_driver); +} + +static void cx8802_fini(void) +{ + pci_unregister_driver(&cx8802_pci_driver); +} + +module_init(cx8802_init); +module_exit(cx8802_fini); EXPORT_SYMBOL(cx8802_buf_prepare); EXPORT_SYMBOL(cx8802_buf_queue); EXPORT_SYMBOL(cx8802_cancel_buffers); @@ -551,9 +864,10 @@ EXPORT_SYMBOL(cx8802_cancel_buffers); EXPORT_SYMBOL(cx8802_init_common); EXPORT_SYMBOL(cx8802_fini_common); -EXPORT_SYMBOL(cx8802_suspend_common); -EXPORT_SYMBOL(cx8802_resume_common); - +EXPORT_SYMBOL(cx8802_register_driver); +EXPORT_SYMBOL(cx8802_unregister_driver); +EXPORT_SYMBOL(cx8802_get_device); +EXPORT_SYMBOL(cx8802_get_driver); /* ----------------------------------------------------------- */ /* * Local variables: diff --git a/drivers/media/video/cx88/cx88-tvaudio.c b/drivers/media/video/cx88/cx88-tvaudio.c index 58ba9f77352..3482e0114d4 100644 --- a/drivers/media/video/cx88/cx88-tvaudio.c +++ b/drivers/media/video/cx88/cx88-tvaudio.c @@ -143,19 +143,6 @@ static void set_audio_finish(struct cx88_core *core, u32 ctl) cx88_start_audio_dma(core); if (cx88_boards[core->board].mpeg & CX88_MPEG_BLACKBIRD) { - /* sets sound input from external adc */ - switch (core->board) { - case CX88_BOARD_HAUPPAUGE_ROSLYN: - case CX88_BOARD_KWORLD_MCE200_DELUXE: - case CX88_BOARD_KWORLD_HARDWARE_MPEG_TV_XPERT: - case CX88_BOARD_PIXELVIEW_PLAYTV_P7000: - case CX88_BOARD_ASUS_PVR_416: - cx_clear(AUD_CTL, EN_I2SIN_ENABLE); - break; - default: - cx_set(AUD_CTL, EN_I2SIN_ENABLE); - } - cx_write(AUD_I2SINPUTCNTL, 4); cx_write(AUD_BAUDRATE, 1); /* 'pass-thru mode': this enables the i2s output to the mpeg encoder */ diff --git a/drivers/media/video/cx88/cx88-video.c b/drivers/media/video/cx88/cx88-video.c index 90e298d074d..8613378428f 100644 --- a/drivers/media/video/cx88/cx88-video.c +++ b/drivers/media/video/cx88/cx88-video.c @@ -454,6 +454,14 @@ static int video_mux(struct cx88_core *core, unsigned int input) cx_clear(MO_FILTER_ODD, 0x00002020); break; } + + if (cx88_boards[core->board].mpeg & CX88_MPEG_BLACKBIRD) { + /* sets sound input from external adc */ + if (INPUT(input)->extadc) + cx_set(AUD_CTL, EN_I2SIN_ENABLE); + else + cx_clear(AUD_CTL, EN_I2SIN_ENABLE); + } return 0; } @@ -1490,6 +1498,30 @@ int cx88_do_ioctl(struct inode *inode, struct file *file, int radio, mutex_unlock(&core->lock); return 0; } +#ifdef CONFIG_VIDEO_ADV_DEBUG + /* ioctls to allow direct acces to the cx2388x registers */ + case VIDIOC_INT_G_REGISTER: + { + struct v4l2_register *reg = arg; + + if (reg->i2c_id != 0) + return -EINVAL; + /* cx2388x has a 24-bit register space */ + reg->val = cx_read(reg->reg&0xffffff); + return 0; + } + case VIDIOC_INT_S_REGISTER: + { + struct v4l2_register *reg = arg; + + if (reg->i2c_id != 0) + return -EINVAL; + if (!capable(CAP_SYS_ADMIN)) + return -EPERM; + cx_write(reg->reg&0xffffff, reg->val); + return 0; + } +#endif default: return v4l_compat_translate_ioctl(inode,file,cmd,arg, diff --git a/drivers/media/video/cx88/cx88-vp3054-i2c.c b/drivers/media/video/cx88/cx88-vp3054-i2c.c index 2b4f1970c7d..6068c9bf82c 100644 --- a/drivers/media/video/cx88/cx88-vp3054-i2c.c +++ b/drivers/media/video/cx88/cx88-vp3054-i2c.c @@ -168,7 +168,7 @@ void vp3054_i2c_remove(struct cx8802_dev *dev) dev->core->board != CX88_BOARD_DNTV_LIVE_DVB_T_PRO) return; - i2c_bit_del_bus(&vp3054_i2c->adap); + i2c_del_adapter(&vp3054_i2c->adap); kfree(vp3054_i2c); } diff --git a/drivers/media/video/cx88/cx88.h b/drivers/media/video/cx88/cx88.h index 3bc91aad4fe..7054e941f1d 100644 --- a/drivers/media/video/cx88/cx88.h +++ b/drivers/media/video/cx88/cx88.h @@ -74,6 +74,11 @@ enum cx88_board_type { CX88_MPEG_BLACKBIRD }; +enum cx8802_board_access { + CX8802_DRVCTL_SHARED = 1, + CX8802_DRVCTL_EXCLUSIVE = 2, +}; + /* ----------------------------------------------------------- */ /* tv norms */ @@ -220,6 +225,7 @@ struct cx88_input { enum cx88_itype type; unsigned int vmux; u32 gpio0, gpio1, gpio2, gpio3; + unsigned int extadc:1; }; struct cx88_board { @@ -330,6 +336,7 @@ struct cx88_core { /* cx88-video needs to access cx8802 for hybrid tuner pll access. */ struct cx8802_dev *dvbdev; + enum cx88_board_type active_type_id; }; struct cx8800_dev; @@ -405,6 +412,31 @@ struct cx8802_suspend_state { int disabled; }; +struct cx8802_driver { + struct cx88_core *core; + struct list_head devlist; + + /* Type of driver and access required */ + enum cx88_board_type type_id; + enum cx8802_board_access hw_access; + + /* MPEG 8802 internal only */ + int (*suspend)(struct pci_dev *pci_dev, pm_message_t state); + int (*resume)(struct pci_dev *pci_dev); + + /* MPEG 8802 -> mini driver - Driver probe and configuration */ + int (*probe)(struct cx8802_driver *drv); + int (*remove)(struct cx8802_driver *drv); + + /* MPEG 8802 -> mini driver - Access for hardware control */ + int (*advise_acquire)(struct cx8802_driver *drv); + int (*advise_release)(struct cx8802_driver *drv); + + /* MPEG 8802 <- mini driver - Access for hardware control */ + int (*request_acquire)(struct cx8802_driver *drv); + int (*request_release)(struct cx8802_driver *drv); +}; + struct cx8802_dev { struct cx88_core *core; spinlock_t slock; @@ -439,6 +471,9 @@ struct cx8802_dev { /* mpeg params */ struct cx2341x_mpeg_params params; + + /* List of attached drivers */ + struct cx8802_driver drvlist; }; /* ----------------------------------------------------------- */ @@ -571,6 +606,11 @@ void cx88_get_stereo(struct cx88_core *core, struct v4l2_tuner *t); void cx88_set_stereo(struct cx88_core *core, u32 mode, int manual); int cx88_audio_thread(void *data); +int cx8802_register_driver(struct cx8802_driver *drv); +int cx8802_unregister_driver(struct cx8802_driver *drv); +struct cx8802_dev * cx8802_get_device(struct inode *inode); +struct cx8802_driver * cx8802_get_driver(struct cx8802_dev *dev, enum cx88_board_type btype); + /* ----------------------------------------------------------- */ /* cx88-input.c */ @@ -600,6 +640,13 @@ extern int cx88_do_ioctl(struct inode *inode, struct file *file, int radio, extern const u32 cx88_user_ctrls[]; extern int cx8800_ctrl_query(struct v4l2_queryctrl *qctrl); +/* ----------------------------------------------------------- */ +/* cx88-blackbird.c */ +/* used by cx88-ivtv ioctl emulation layer */ +extern int (*cx88_ioctl_hook)(struct inode *inode, struct file *file, + unsigned int cmd, void *arg); +extern unsigned int (*cx88_ioctl_translator)(unsigned int cmd); + /* * Local variables: * c-basic-offset: 8 diff --git a/drivers/media/video/et61x251/et61x251_core.c b/drivers/media/video/et61x251/et61x251_core.c index f786ab11d2c..86e353b26b5 100644 --- a/drivers/media/video/et61x251/et61x251_core.c +++ b/drivers/media/video/et61x251/et61x251_core.c @@ -1182,8 +1182,6 @@ static void et61x251_release_resources(struct et61x251_device* cam) video_set_drvdata(cam->v4ldev, NULL); video_unregister_device(cam->v4ldev); - usb_put_dev(cam->usbdev); - mutex_unlock(&et61x251_sysfs_lock); kfree(cam->control_buffer); @@ -1275,6 +1273,7 @@ static int et61x251_release(struct inode* inode, struct file* filp) if (cam->state & DEV_DISCONNECTED) { et61x251_release_resources(cam); + usb_put_dev(cam->usbdev); mutex_unlock(&cam->dev_mutex); kfree(cam); return 0; diff --git a/drivers/media/video/ir-kbd-i2c.c b/drivers/media/video/ir-kbd-i2c.c index 1457b160222..59edf58204d 100644 --- a/drivers/media/video/ir-kbd-i2c.c +++ b/drivers/media/video/ir-kbd-i2c.c @@ -268,9 +268,9 @@ static void ir_timer(unsigned long data) schedule_work(&ir->work); } -static void ir_work(void *data) +static void ir_work(struct work_struct *work) { - struct IR_i2c *ir = data; + struct IR_i2c *ir = container_of(work, struct IR_i2c, work); ir_key_poll(ir); mod_timer(&ir->timer, jiffies+HZ/10); } @@ -305,15 +305,14 @@ static int ir_attach(struct i2c_adapter *adap, int addr, int ir_type; struct IR_i2c *ir; struct input_dev *input_dev; + int err; ir = kzalloc(sizeof(struct IR_i2c),GFP_KERNEL); input_dev = input_allocate_device(); if (!ir || !input_dev) { - input_free_device(input_dev); - kfree(ir); - return -ENOMEM; + err = -ENOMEM; + goto err_out_free; } - memset(ir,0,sizeof(*ir)); ir->c = client_template; ir->input = input_dev; @@ -355,32 +354,34 @@ static int ir_attach(struct i2c_adapter *adap, int addr, break; case 0x7a: case 0x47: + case 0x71: /* Handled by saa7134-input */ name = "SAA713x remote"; ir_type = IR_TYPE_OTHER; break; default: /* shouldn't happen */ - printk(DEVNAME ": Huh? unknown i2c address (0x%02x)?\n",addr); - kfree(ir); - return -1; + printk(DEVNAME ": Huh? unknown i2c address (0x%02x)?\n", addr); + err = -ENODEV; + goto err_out_free; } /* Sets name */ snprintf(ir->c.name, sizeof(ir->c.name), "i2c IR (%s)", name); - ir->ir_codes=ir_codes; + ir->ir_codes = ir_codes; /* register i2c device * At device register, IR codes may be changed to be * board dependent. */ - i2c_attach_client(&ir->c); + err = i2c_attach_client(&ir->c); + if (err) + goto err_out_free; /* If IR not supported or disabled, unregisters driver */ if (ir->get_key == NULL) { - i2c_detach_client(&ir->c); - kfree(ir); - return -1; + err = -ENODEV; + goto err_out_detach; } /* Phys addr can only be set after attaching (for ir->c.dev.bus_id) */ @@ -389,24 +390,33 @@ static int ir_attach(struct i2c_adapter *adap, int addr, ir->c.dev.bus_id); /* init + register input device */ - ir_input_init(input_dev,&ir->ir,ir_type,ir->ir_codes); + ir_input_init(input_dev, &ir->ir, ir_type, ir->ir_codes); input_dev->id.bustype = BUS_I2C; input_dev->name = ir->c.name; input_dev->phys = ir->phys; - /* register event device */ - input_register_device(ir->input); + err = input_register_device(ir->input); + if (err) + goto err_out_detach; + printk(DEVNAME ": %s detected at %s [%s]\n", - ir->input->name,ir->input->phys,adap->name); + ir->input->name, ir->input->phys, adap->name); /* start polling via eventd */ - INIT_WORK(&ir->work, ir_work, ir); + INIT_WORK(&ir->work, ir_work); init_timer(&ir->timer); ir->timer.function = ir_timer; ir->timer.data = (unsigned long)ir; schedule_work(&ir->work); return 0; + + err_out_detach: + i2c_detach_client(&ir->c); + err_out_free: + input_free_device(input_dev); + kfree(ir); + return err; } static int ir_detach(struct i2c_client *client) @@ -414,7 +424,7 @@ static int ir_detach(struct i2c_client *client) struct IR_i2c *ir = i2c_get_clientdata(client); /* kill outstanding polls */ - del_timer(&ir->timer); + del_timer_sync(&ir->timer); flush_scheduled_work(); /* unregister devices */ @@ -439,7 +449,7 @@ static int ir_probe(struct i2c_adapter *adap) */ static const int probe_bttv[] = { 0x1a, 0x18, 0x4b, 0x64, 0x30, -1}; - static const int probe_saa7134[] = { 0x7a, 0x47, -1 }; + static const int probe_saa7134[] = { 0x7a, 0x47, 0x71, -1 }; static const int probe_em28XX[] = { 0x30, 0x47, -1 }; const int *probe = NULL; struct i2c_client c; diff --git a/drivers/media/video/msp3400-driver.c b/drivers/media/video/msp3400-driver.c index cf43df3fe70..e1b56dc13c3 100644 --- a/drivers/media/video/msp3400-driver.c +++ b/drivers/media/video/msp3400-driver.c @@ -56,7 +56,7 @@ #include <media/tvaudio.h> #include <media/msp3400.h> #include <linux/kthread.h> -#include <linux/suspend.h> +#include <linux/freezer.h> #include "msp3400-driver.h" /* ---------------------------------------------------------------------- */ diff --git a/drivers/media/video/mxb.c b/drivers/media/video/mxb.c index b0aea4002d1..152cc6b3e15 100644 --- a/drivers/media/video/mxb.c +++ b/drivers/media/video/mxb.c @@ -160,10 +160,6 @@ static int mxb_probe(struct saa7146_dev* dev) printk("mxb: saa7111 i2c module not available.\n"); return -ENODEV; } - if ((result = request_module("tuner")) < 0) { - printk("mxb: tuner i2c module not available.\n"); - return -ENODEV; - } if ((result = request_module("tea6420")) < 0) { printk("mxb: tea6420 i2c module not available.\n"); return -ENODEV; @@ -176,6 +172,10 @@ static int mxb_probe(struct saa7146_dev* dev) printk("mxb: tda9840 i2c module not available.\n"); return -ENODEV; } + if ((result = request_module("tuner")) < 0) { + printk("mxb: tuner i2c module not available.\n"); + return -ENODEV; + } mxb = kzalloc(sizeof(struct mxb), GFP_KERNEL); if( NULL == mxb ) { diff --git a/drivers/media/video/ov7670.c b/drivers/media/video/ov7670.c new file mode 100644 index 00000000000..89dd18c3c5c --- /dev/null +++ b/drivers/media/video/ov7670.c @@ -0,0 +1,1333 @@ +/* + * A V4L2 driver for OmniVision OV7670 cameras. + * + * Copyright 2006 One Laptop Per Child Association, Inc. Written + * by Jonathan Corbet with substantial inspiration from Mark + * McClelland's ovcamchip code. + * + * This file may be distributed under the terms of the GNU General + * Public License, version 2. + */ +#include <linux/init.h> +#include <linux/module.h> +#include <linux/moduleparam.h> +#include <linux/slab.h> +#include <linux/delay.h> +#include <linux/videodev.h> +#include <media/v4l2-common.h> +#include <linux/i2c.h> + + +MODULE_AUTHOR("Jonathan Corbet <corbet@lwn.net."); +MODULE_DESCRIPTION("A low-level driver for OmniVision ov7670 sensors"); +MODULE_LICENSE("GPL"); + +/* + * Basic window sizes. These probably belong somewhere more globally + * useful. + */ +#define VGA_WIDTH 640 +#define VGA_HEIGHT 480 +#define QVGA_WIDTH 320 +#define QVGA_HEIGHT 240 +#define CIF_WIDTH 352 +#define CIF_HEIGHT 288 +#define QCIF_WIDTH 176 +#define QCIF_HEIGHT 144 + +/* + * Our nominal (default) frame rate. + */ +#define OV7670_FRAME_RATE 30 + +/* + * The 7670 sits on i2c with ID 0x42 + */ +#define OV7670_I2C_ADDR 0x42 + +/* Registers */ +#define REG_GAIN 0x00 /* Gain lower 8 bits (rest in vref) */ +#define REG_BLUE 0x01 /* blue gain */ +#define REG_RED 0x02 /* red gain */ +#define REG_VREF 0x03 /* Pieces of GAIN, VSTART, VSTOP */ +#define REG_COM1 0x04 /* Control 1 */ +#define COM1_CCIR656 0x40 /* CCIR656 enable */ +#define REG_BAVE 0x05 /* U/B Average level */ +#define REG_GbAVE 0x06 /* Y/Gb Average level */ +#define REG_AECHH 0x07 /* AEC MS 5 bits */ +#define REG_RAVE 0x08 /* V/R Average level */ +#define REG_COM2 0x09 /* Control 2 */ +#define COM2_SSLEEP 0x10 /* Soft sleep mode */ +#define REG_PID 0x0a /* Product ID MSB */ +#define REG_VER 0x0b /* Product ID LSB */ +#define REG_COM3 0x0c /* Control 3 */ +#define COM3_SWAP 0x40 /* Byte swap */ +#define COM3_SCALEEN 0x08 /* Enable scaling */ +#define COM3_DCWEN 0x04 /* Enable downsamp/crop/window */ +#define REG_COM4 0x0d /* Control 4 */ +#define REG_COM5 0x0e /* All "reserved" */ +#define REG_COM6 0x0f /* Control 6 */ +#define REG_AECH 0x10 /* More bits of AEC value */ +#define REG_CLKRC 0x11 /* Clocl control */ +#define CLK_EXT 0x40 /* Use external clock directly */ +#define CLK_SCALE 0x3f /* Mask for internal clock scale */ +#define REG_COM7 0x12 /* Control 7 */ +#define COM7_RESET 0x80 /* Register reset */ +#define COM7_FMT_MASK 0x38 +#define COM7_FMT_VGA 0x00 +#define COM7_FMT_CIF 0x20 /* CIF format */ +#define COM7_FMT_QVGA 0x10 /* QVGA format */ +#define COM7_FMT_QCIF 0x08 /* QCIF format */ +#define COM7_RGB 0x04 /* bits 0 and 2 - RGB format */ +#define COM7_YUV 0x00 /* YUV */ +#define COM7_BAYER 0x01 /* Bayer format */ +#define COM7_PBAYER 0x05 /* "Processed bayer" */ +#define REG_COM8 0x13 /* Control 8 */ +#define COM8_FASTAEC 0x80 /* Enable fast AGC/AEC */ +#define COM8_AECSTEP 0x40 /* Unlimited AEC step size */ +#define COM8_BFILT 0x20 /* Band filter enable */ +#define COM8_AGC 0x04 /* Auto gain enable */ +#define COM8_AWB 0x02 /* White balance enable */ +#define COM8_AEC 0x01 /* Auto exposure enable */ +#define REG_COM9 0x14 /* Control 9 - gain ceiling */ +#define REG_COM10 0x15 /* Control 10 */ +#define COM10_HSYNC 0x40 /* HSYNC instead of HREF */ +#define COM10_PCLK_HB 0x20 /* Suppress PCLK on horiz blank */ +#define COM10_HREF_REV 0x08 /* Reverse HREF */ +#define COM10_VS_LEAD 0x04 /* VSYNC on clock leading edge */ +#define COM10_VS_NEG 0x02 /* VSYNC negative */ +#define COM10_HS_NEG 0x01 /* HSYNC negative */ +#define REG_HSTART 0x17 /* Horiz start high bits */ +#define REG_HSTOP 0x18 /* Horiz stop high bits */ +#define REG_VSTART 0x19 /* Vert start high bits */ +#define REG_VSTOP 0x1a /* Vert stop high bits */ +#define REG_PSHFT 0x1b /* Pixel delay after HREF */ +#define REG_MIDH 0x1c /* Manuf. ID high */ +#define REG_MIDL 0x1d /* Manuf. ID low */ +#define REG_MVFP 0x1e /* Mirror / vflip */ +#define MVFP_MIRROR 0x20 /* Mirror image */ +#define MVFP_FLIP 0x10 /* Vertical flip */ + +#define REG_AEW 0x24 /* AGC upper limit */ +#define REG_AEB 0x25 /* AGC lower limit */ +#define REG_VPT 0x26 /* AGC/AEC fast mode op region */ +#define REG_HSYST 0x30 /* HSYNC rising edge delay */ +#define REG_HSYEN 0x31 /* HSYNC falling edge delay */ +#define REG_HREF 0x32 /* HREF pieces */ +#define REG_TSLB 0x3a /* lots of stuff */ +#define TSLB_YLAST 0x04 /* UYVY or VYUY - see com13 */ +#define REG_COM11 0x3b /* Control 11 */ +#define COM11_NIGHT 0x80 /* NIght mode enable */ +#define COM11_NMFR 0x60 /* Two bit NM frame rate */ +#define COM11_HZAUTO 0x10 /* Auto detect 50/60 Hz */ +#define COM11_50HZ 0x08 /* Manual 50Hz select */ +#define COM11_EXP 0x02 +#define REG_COM12 0x3c /* Control 12 */ +#define COM12_HREF 0x80 /* HREF always */ +#define REG_COM13 0x3d /* Control 13 */ +#define COM13_GAMMA 0x80 /* Gamma enable */ +#define COM13_UVSAT 0x40 /* UV saturation auto adjustment */ +#define COM13_UVSWAP 0x01 /* V before U - w/TSLB */ +#define REG_COM14 0x3e /* Control 14 */ +#define COM14_DCWEN 0x10 /* DCW/PCLK-scale enable */ +#define REG_EDGE 0x3f /* Edge enhancement factor */ +#define REG_COM15 0x40 /* Control 15 */ +#define COM15_R10F0 0x00 /* Data range 10 to F0 */ +#define COM15_R01FE 0x80 /* 01 to FE */ +#define COM15_R00FF 0xc0 /* 00 to FF */ +#define COM15_RGB565 0x10 /* RGB565 output */ +#define COM15_RGB555 0x30 /* RGB555 output */ +#define REG_COM16 0x41 /* Control 16 */ +#define COM16_AWBGAIN 0x08 /* AWB gain enable */ +#define REG_COM17 0x42 /* Control 17 */ +#define COM17_AECWIN 0xc0 /* AEC window - must match COM4 */ +#define COM17_CBAR 0x08 /* DSP Color bar */ + +/* + * This matrix defines how the colors are generated, must be + * tweaked to adjust hue and saturation. + * + * Order: v-red, v-green, v-blue, u-red, u-green, u-blue + * + * They are nine-bit signed quantities, with the sign bit + * stored in 0x58. Sign for v-red is bit 0, and up from there. + */ +#define REG_CMATRIX_BASE 0x4f +#define CMATRIX_LEN 6 +#define REG_CMATRIX_SIGN 0x58 + + +#define REG_BRIGHT 0x55 /* Brightness */ +#define REG_CONTRAS 0x56 /* Contrast control */ + +#define REG_GFIX 0x69 /* Fix gain control */ + +#define REG_RGB444 0x8c /* RGB 444 control */ +#define R444_ENABLE 0x02 /* Turn on RGB444, overrides 5x5 */ +#define R444_RGBX 0x01 /* Empty nibble at end */ + +#define REG_HAECC1 0x9f /* Hist AEC/AGC control 1 */ +#define REG_HAECC2 0xa0 /* Hist AEC/AGC control 2 */ + +#define REG_BD50MAX 0xa5 /* 50hz banding step limit */ +#define REG_HAECC3 0xa6 /* Hist AEC/AGC control 3 */ +#define REG_HAECC4 0xa7 /* Hist AEC/AGC control 4 */ +#define REG_HAECC5 0xa8 /* Hist AEC/AGC control 5 */ +#define REG_HAECC6 0xa9 /* Hist AEC/AGC control 6 */ +#define REG_HAECC7 0xaa /* Hist AEC/AGC control 7 */ +#define REG_BD60MAX 0xab /* 60hz banding step limit */ + + +/* + * Information we maintain about a known sensor. + */ +struct ov7670_format_struct; /* coming later */ +struct ov7670_info { + struct ov7670_format_struct *fmt; /* Current format */ + unsigned char sat; /* Saturation value */ + int hue; /* Hue value */ +}; + + + + +/* + * The default register settings, as obtained from OmniVision. There + * is really no making sense of most of these - lots of "reserved" values + * and such. + * + * These settings give VGA YUYV. + */ + +struct regval_list { + unsigned char reg_num; + unsigned char value; +}; + +static struct regval_list ov7670_default_regs[] = { + { REG_COM7, COM7_RESET }, +/* + * Clock scale: 3 = 15fps + * 2 = 20fps + * 1 = 30fps + */ + { REG_CLKRC, 0x1 }, /* OV: clock scale (30 fps) */ + { REG_TSLB, 0x04 }, /* OV */ + { REG_COM7, 0 }, /* VGA */ + /* + * Set the hardware window. These values from OV don't entirely + * make sense - hstop is less than hstart. But they work... + */ + { REG_HSTART, 0x13 }, { REG_HSTOP, 0x01 }, + { REG_HREF, 0xb6 }, { REG_VSTART, 0x02 }, + { REG_VSTOP, 0x7a }, { REG_VREF, 0x0a }, + + { REG_COM3, 0 }, { REG_COM14, 0 }, + /* Mystery scaling numbers */ + { 0x70, 0x3a }, { 0x71, 0x35 }, + { 0x72, 0x11 }, { 0x73, 0xf0 }, + { 0xa2, 0x02 }, { REG_COM10, 0x0 }, + + /* Gamma curve values */ + { 0x7a, 0x20 }, { 0x7b, 0x10 }, + { 0x7c, 0x1e }, { 0x7d, 0x35 }, + { 0x7e, 0x5a }, { 0x7f, 0x69 }, + { 0x80, 0x76 }, { 0x81, 0x80 }, + { 0x82, 0x88 }, { 0x83, 0x8f }, + { 0x84, 0x96 }, { 0x85, 0xa3 }, + { 0x86, 0xaf }, { 0x87, 0xc4 }, + { 0x88, 0xd7 }, { 0x89, 0xe8 }, + + /* AGC and AEC parameters. Note we start by disabling those features, + then turn them only after tweaking the values. */ + { REG_COM8, COM8_FASTAEC | COM8_AECSTEP | COM8_BFILT }, + { REG_GAIN, 0 }, { REG_AECH, 0 }, + { REG_COM4, 0x40 }, /* magic reserved bit */ + { REG_COM9, 0x18 }, /* 4x gain + magic rsvd bit */ + { REG_BD50MAX, 0x05 }, { REG_BD60MAX, 0x07 }, + { REG_AEW, 0x95 }, { REG_AEB, 0x33 }, + { REG_VPT, 0xe3 }, { REG_HAECC1, 0x78 }, + { REG_HAECC2, 0x68 }, { 0xa1, 0x03 }, /* magic */ + { REG_HAECC3, 0xd8 }, { REG_HAECC4, 0xd8 }, + { REG_HAECC5, 0xf0 }, { REG_HAECC6, 0x90 }, + { REG_HAECC7, 0x94 }, + { REG_COM8, COM8_FASTAEC|COM8_AECSTEP|COM8_BFILT|COM8_AGC|COM8_AEC }, + + /* Almost all of these are magic "reserved" values. */ + { REG_COM5, 0x61 }, { REG_COM6, 0x4b }, + { 0x16, 0x02 }, { REG_MVFP, 0x07|MVFP_MIRROR }, + { 0x21, 0x02 }, { 0x22, 0x91 }, + { 0x29, 0x07 }, { 0x33, 0x0b }, + { 0x35, 0x0b }, { 0x37, 0x1d }, + { 0x38, 0x71 }, { 0x39, 0x2a }, + { REG_COM12, 0x78 }, { 0x4d, 0x40 }, + { 0x4e, 0x20 }, { REG_GFIX, 0 }, + { 0x6b, 0x4a }, { 0x74, 0x10 }, + { 0x8d, 0x4f }, { 0x8e, 0 }, + { 0x8f, 0 }, { 0x90, 0 }, + { 0x91, 0 }, { 0x96, 0 }, + { 0x9a, 0 }, { 0xb0, 0x84 }, + { 0xb1, 0x0c }, { 0xb2, 0x0e }, + { 0xb3, 0x82 }, { 0xb8, 0x0a }, + + /* More reserved magic, some of which tweaks white balance */ + { 0x43, 0x0a }, { 0x44, 0xf0 }, + { 0x45, 0x34 }, { 0x46, 0x58 }, + { 0x47, 0x28 }, { 0x48, 0x3a }, + { 0x59, 0x88 }, { 0x5a, 0x88 }, + { 0x5b, 0x44 }, { 0x5c, 0x67 }, + { 0x5d, 0x49 }, { 0x5e, 0x0e }, + { 0x6c, 0x0a }, { 0x6d, 0x55 }, + { 0x6e, 0x11 }, { 0x6f, 0x9f }, /* "9e for advance AWB" */ + { 0x6a, 0x40 }, { REG_BLUE, 0x40 }, + { REG_RED, 0x60 }, + { REG_COM8, COM8_FASTAEC|COM8_AECSTEP|COM8_BFILT|COM8_AGC|COM8_AEC|COM8_AWB }, + + /* Matrix coefficients */ + { 0x4f, 0x80 }, { 0x50, 0x80 }, + { 0x51, 0 }, { 0x52, 0x22 }, + { 0x53, 0x5e }, { 0x54, 0x80 }, + { 0x58, 0x9e }, + + { REG_COM16, COM16_AWBGAIN }, { REG_EDGE, 0 }, + { 0x75, 0x05 }, { 0x76, 0xe1 }, + { 0x4c, 0 }, { 0x77, 0x01 }, + { REG_COM13, 0xc3 }, { 0x4b, 0x09 }, + { 0xc9, 0x60 }, { REG_COM16, 0x38 }, + { 0x56, 0x40 }, + + { 0x34, 0x11 }, { REG_COM11, COM11_EXP|COM11_HZAUTO }, + { 0xa4, 0x88 }, { 0x96, 0 }, + { 0x97, 0x30 }, { 0x98, 0x20 }, + { 0x99, 0x30 }, { 0x9a, 0x84 }, + { 0x9b, 0x29 }, { 0x9c, 0x03 }, + { 0x9d, 0x4c }, { 0x9e, 0x3f }, + { 0x78, 0x04 }, + + /* Extra-weird stuff. Some sort of multiplexor register */ + { 0x79, 0x01 }, { 0xc8, 0xf0 }, + { 0x79, 0x0f }, { 0xc8, 0x00 }, + { 0x79, 0x10 }, { 0xc8, 0x7e }, + { 0x79, 0x0a }, { 0xc8, 0x80 }, + { 0x79, 0x0b }, { 0xc8, 0x01 }, + { 0x79, 0x0c }, { 0xc8, 0x0f }, + { 0x79, 0x0d }, { 0xc8, 0x20 }, + { 0x79, 0x09 }, { 0xc8, 0x80 }, + { 0x79, 0x02 }, { 0xc8, 0xc0 }, + { 0x79, 0x03 }, { 0xc8, 0x40 }, + { 0x79, 0x05 }, { 0xc8, 0x30 }, + { 0x79, 0x26 }, + + { 0xff, 0xff }, /* END MARKER */ +}; + + +/* + * Here we'll try to encapsulate the changes for just the output + * video format. + * + * RGB656 and YUV422 come from OV; RGB444 is homebrewed. + * + * IMPORTANT RULE: the first entry must be for COM7, see ov7670_s_fmt for why. + */ + + +static struct regval_list ov7670_fmt_yuv422[] = { + { REG_COM7, 0x0 }, /* Selects YUV mode */ + { REG_RGB444, 0 }, /* No RGB444 please */ + { REG_COM1, 0 }, + { REG_COM15, COM15_R00FF }, + { REG_COM9, 0x18 }, /* 4x gain ceiling; 0x8 is reserved bit */ + { 0x4f, 0x80 }, /* "matrix coefficient 1" */ + { 0x50, 0x80 }, /* "matrix coefficient 2" */ + { 0x51, 0 }, /* vb */ + { 0x52, 0x22 }, /* "matrix coefficient 4" */ + { 0x53, 0x5e }, /* "matrix coefficient 5" */ + { 0x54, 0x80 }, /* "matrix coefficient 6" */ + { REG_COM13, COM13_GAMMA|COM13_UVSAT }, + { 0xff, 0xff }, +}; + +static struct regval_list ov7670_fmt_rgb565[] = { + { REG_COM7, COM7_RGB }, /* Selects RGB mode */ + { REG_RGB444, 0 }, /* No RGB444 please */ + { REG_COM1, 0x0 }, + { REG_COM15, COM15_RGB565 }, + { REG_COM9, 0x38 }, /* 16x gain ceiling; 0x8 is reserved bit */ + { 0x4f, 0xb3 }, /* "matrix coefficient 1" */ + { 0x50, 0xb3 }, /* "matrix coefficient 2" */ + { 0x51, 0 }, /* vb */ + { 0x52, 0x3d }, /* "matrix coefficient 4" */ + { 0x53, 0xa7 }, /* "matrix coefficient 5" */ + { 0x54, 0xe4 }, /* "matrix coefficient 6" */ + { REG_COM13, COM13_GAMMA|COM13_UVSAT }, + { 0xff, 0xff }, +}; + +static struct regval_list ov7670_fmt_rgb444[] = { + { REG_COM7, COM7_RGB }, /* Selects RGB mode */ + { REG_RGB444, R444_ENABLE }, /* Enable xxxxrrrr ggggbbbb */ + { REG_COM1, 0x40 }, /* Magic reserved bit */ + { REG_COM15, COM15_R01FE|COM15_RGB565 }, /* Data range needed? */ + { REG_COM9, 0x38 }, /* 16x gain ceiling; 0x8 is reserved bit */ + { 0x4f, 0xb3 }, /* "matrix coefficient 1" */ + { 0x50, 0xb3 }, /* "matrix coefficient 2" */ + { 0x51, 0 }, /* vb */ + { 0x52, 0x3d }, /* "matrix coefficient 4" */ + { 0x53, 0xa7 }, /* "matrix coefficient 5" */ + { 0x54, 0xe4 }, /* "matrix coefficient 6" */ + { REG_COM13, COM13_GAMMA|COM13_UVSAT|0x2 }, /* Magic rsvd bit */ + { 0xff, 0xff }, +}; + + + + +/* + * Low-level register I/O. + */ + +static int ov7670_read(struct i2c_client *c, unsigned char reg, + unsigned char *value) +{ + int ret; + + ret = i2c_smbus_read_byte_data(c, reg); + if (ret >= 0) + *value = (unsigned char) ret; + return ret; +} + + +static int ov7670_write(struct i2c_client *c, unsigned char reg, + unsigned char value) +{ + return i2c_smbus_write_byte_data(c, reg, value); +} + + +/* + * Write a list of register settings; ff/ff stops the process. + */ +static int ov7670_write_array(struct i2c_client *c, struct regval_list *vals) +{ + while (vals->reg_num != 0xff || vals->value != 0xff) { + int ret = ov7670_write(c, vals->reg_num, vals->value); + if (ret < 0) + return ret; + vals++; + } + return 0; +} + + +/* + * Stuff that knows about the sensor. + */ +static void ov7670_reset(struct i2c_client *client) +{ + ov7670_write(client, REG_COM7, COM7_RESET); + msleep(1); +} + + +static int ov7670_init(struct i2c_client *client) +{ + return ov7670_write_array(client, ov7670_default_regs); +} + + + +static int ov7670_detect(struct i2c_client *client) +{ + unsigned char v; + int ret; + + ret = ov7670_init(client); + if (ret < 0) + return ret; + ret = ov7670_read(client, REG_MIDH, &v); + if (ret < 0) + return ret; + if (v != 0x7f) /* OV manuf. id. */ + return -ENODEV; + ret = ov7670_read(client, REG_MIDL, &v); + if (ret < 0) + return ret; + if (v != 0xa2) + return -ENODEV; + /* + * OK, we know we have an OmniVision chip...but which one? + */ + ret = ov7670_read(client, REG_PID, &v); + if (ret < 0) + return ret; + if (v != 0x76) /* PID + VER = 0x76 / 0x73 */ + return -ENODEV; + ret = ov7670_read(client, REG_VER, &v); + if (ret < 0) + return ret; + if (v != 0x73) /* PID + VER = 0x76 / 0x73 */ + return -ENODEV; + return 0; +} + + +/* + * Store information about the video data format. The color matrix + * is deeply tied into the format, so keep the relevant values here. + * The magic matrix nubmers come from OmniVision. + */ +static struct ov7670_format_struct { + __u8 *desc; + __u32 pixelformat; + struct regval_list *regs; + int cmatrix[CMATRIX_LEN]; +} ov7670_formats[] = { + { + .desc = "YUYV 4:2:2", + .pixelformat = V4L2_PIX_FMT_YUYV, + .regs = ov7670_fmt_yuv422, + .cmatrix = { 128, -128, 0, -34, -94, 128 }, + }, + { + .desc = "RGB 444", + .pixelformat = V4L2_PIX_FMT_RGB444, + .regs = ov7670_fmt_rgb444, + .cmatrix = { 179, -179, 0, -61, -176, 228 }, + }, + { + .desc = "RGB 565", + .pixelformat = V4L2_PIX_FMT_RGB565, + .regs = ov7670_fmt_rgb565, + .cmatrix = { 179, -179, 0, -61, -176, 228 }, + }, +}; +#define N_OV7670_FMTS (sizeof(ov7670_formats)/sizeof(ov7670_formats[0])) + +/* + * All formats we support are 2 bytes/pixel. + */ +#define BYTES_PER_PIXEL 2 + +/* + * Then there is the issue of window sizes. Try to capture the info here. + */ + +/* + * QCIF mode is done (by OV) in a very strange way - it actually looks like + * VGA with weird scaling options - they do *not* use the canned QCIF mode + * which is allegedly provided by the sensor. So here's the weird register + * settings. + */ +static struct regval_list ov7670_qcif_regs[] = { + { REG_COM3, COM3_SCALEEN|COM3_DCWEN }, + { REG_COM3, COM3_DCWEN }, + { REG_COM14, COM14_DCWEN | 0x01}, + { 0x73, 0xf1 }, + { 0xa2, 0x52 }, + { 0x7b, 0x1c }, + { 0x7c, 0x28 }, + { 0x7d, 0x3c }, + { 0x7f, 0x69 }, + { REG_COM9, 0x38 }, + { 0xa1, 0x0b }, + { 0x74, 0x19 }, + { 0x9a, 0x80 }, + { 0x43, 0x14 }, + { REG_COM13, 0xc0 }, + { 0xff, 0xff }, +}; + +static struct ov7670_win_size { + int width; + int height; + unsigned char com7_bit; + int hstart; /* Start/stop values for the camera. Note */ + int hstop; /* that they do not always make complete */ + int vstart; /* sense to humans, but evidently the sensor */ + int vstop; /* will do the right thing... */ + struct regval_list *regs; /* Regs to tweak */ +/* h/vref stuff */ +} ov7670_win_sizes[] = { + /* VGA */ + { + .width = VGA_WIDTH, + .height = VGA_HEIGHT, + .com7_bit = COM7_FMT_VGA, + .hstart = 158, /* These values from */ + .hstop = 14, /* Omnivision */ + .vstart = 10, + .vstop = 490, + .regs = NULL, + }, + /* CIF */ + { + .width = CIF_WIDTH, + .height = CIF_HEIGHT, + .com7_bit = COM7_FMT_CIF, + .hstart = 170, /* Empirically determined */ + .hstop = 90, + .vstart = 14, + .vstop = 494, + .regs = NULL, + }, + /* QVGA */ + { + .width = QVGA_WIDTH, + .height = QVGA_HEIGHT, + .com7_bit = COM7_FMT_QVGA, + .hstart = 164, /* Empirically determined */ + .hstop = 20, + .vstart = 14, + .vstop = 494, + .regs = NULL, + }, + /* QCIF */ + { + .width = QCIF_WIDTH, + .height = QCIF_HEIGHT, + .com7_bit = COM7_FMT_VGA, /* see comment above */ + .hstart = 456, /* Empirically determined */ + .hstop = 24, + .vstart = 14, + .vstop = 494, + .regs = ov7670_qcif_regs, + }, +}; + +#define N_WIN_SIZES (sizeof(ov7670_win_sizes)/sizeof(ov7670_win_sizes[0])) + + +/* + * Store a set of start/stop values into the camera. + */ +static int ov7670_set_hw(struct i2c_client *client, int hstart, int hstop, + int vstart, int vstop) +{ + int ret; + unsigned char v; +/* + * Horizontal: 11 bits, top 8 live in hstart and hstop. Bottom 3 of + * hstart are in href[2:0], bottom 3 of hstop in href[5:3]. There is + * a mystery "edge offset" value in the top two bits of href. + */ + ret = ov7670_write(client, REG_HSTART, (hstart >> 3) & 0xff); + ret += ov7670_write(client, REG_HSTOP, (hstop >> 3) & 0xff); + ret += ov7670_read(client, REG_HREF, &v); + v = (v & 0xc0) | ((hstop & 0x7) << 3) | (hstart & 0x7); + msleep(10); + ret += ov7670_write(client, REG_HREF, v); +/* + * Vertical: similar arrangement, but only 10 bits. + */ + ret += ov7670_write(client, REG_VSTART, (vstart >> 2) & 0xff); + ret += ov7670_write(client, REG_VSTOP, (vstop >> 2) & 0xff); + ret += ov7670_read(client, REG_VREF, &v); + v = (v & 0xf0) | ((vstop & 0x3) << 2) | (vstart & 0x3); + msleep(10); + ret += ov7670_write(client, REG_VREF, v); + return ret; +} + + +static int ov7670_enum_fmt(struct i2c_client *c, struct v4l2_fmtdesc *fmt) +{ + struct ov7670_format_struct *ofmt; + + if (fmt->index >= N_OV7670_FMTS) + return -EINVAL; + + ofmt = ov7670_formats + fmt->index; + fmt->flags = 0; + strcpy(fmt->description, ofmt->desc); + fmt->pixelformat = ofmt->pixelformat; + return 0; +} + + +static int ov7670_try_fmt(struct i2c_client *c, struct v4l2_format *fmt, + struct ov7670_format_struct **ret_fmt, + struct ov7670_win_size **ret_wsize) +{ + int index; + struct ov7670_win_size *wsize; + struct v4l2_pix_format *pix = &fmt->fmt.pix; + + for (index = 0; index < N_OV7670_FMTS; index++) + if (ov7670_formats[index].pixelformat == pix->pixelformat) + break; + if (index >= N_OV7670_FMTS) + return -EINVAL; + if (ret_fmt != NULL) + *ret_fmt = ov7670_formats + index; + /* + * Fields: the OV devices claim to be progressive. + */ + if (pix->field == V4L2_FIELD_ANY) + pix->field = V4L2_FIELD_NONE; + else if (pix->field != V4L2_FIELD_NONE) + return -EINVAL; + /* + * Round requested image size down to the nearest + * we support, but not below the smallest. + */ + for (wsize = ov7670_win_sizes; wsize < ov7670_win_sizes + N_WIN_SIZES; + wsize++) + if (pix->width >= wsize->width && pix->height >= wsize->height) + break; + if (wsize >= ov7670_win_sizes + N_WIN_SIZES) + wsize--; /* Take the smallest one */ + if (ret_wsize != NULL) + *ret_wsize = wsize; + /* + * Note the size we'll actually handle. + */ + pix->width = wsize->width; + pix->height = wsize->height; + pix->bytesperline = pix->width*BYTES_PER_PIXEL; + pix->sizeimage = pix->height*pix->bytesperline; + return 0; +} + +/* + * Set a format. + */ +static int ov7670_s_fmt(struct i2c_client *c, struct v4l2_format *fmt) +{ + int ret; + struct ov7670_format_struct *ovfmt; + struct ov7670_win_size *wsize; + struct ov7670_info *info = i2c_get_clientdata(c); + unsigned char com7; + + ret = ov7670_try_fmt(c, fmt, &ovfmt, &wsize); + if (ret) + return ret; + /* + * COM7 is a pain in the ass, it doesn't like to be read then + * quickly written afterward. But we have everything we need + * to set it absolutely here, as long as the format-specific + * register sets list it first. + */ + com7 = ovfmt->regs[0].value; + com7 |= wsize->com7_bit; + ov7670_write(c, REG_COM7, com7); + /* + * Now write the rest of the array. Also store start/stops + */ + ov7670_write_array(c, ovfmt->regs + 1); + ov7670_set_hw(c, wsize->hstart, wsize->hstop, wsize->vstart, + wsize->vstop); + ret = 0; + if (wsize->regs) + ret = ov7670_write_array(c, wsize->regs); + info->fmt = ovfmt; + return 0; +} + +/* + * Implement G/S_PARM. There is a "high quality" mode we could try + * to do someday; for now, we just do the frame rate tweak. + */ +static int ov7670_g_parm(struct i2c_client *c, struct v4l2_streamparm *parms) +{ + struct v4l2_captureparm *cp = &parms->parm.capture; + unsigned char clkrc; + int ret; + + if (parms->type != V4L2_BUF_TYPE_VIDEO_CAPTURE) + return -EINVAL; + ret = ov7670_read(c, REG_CLKRC, &clkrc); + if (ret < 0) + return ret; + memset(cp, 0, sizeof(struct v4l2_captureparm)); + cp->capability = V4L2_CAP_TIMEPERFRAME; + cp->timeperframe.numerator = 1; + cp->timeperframe.denominator = OV7670_FRAME_RATE; + if ((clkrc & CLK_EXT) == 0 && (clkrc & CLK_SCALE) > 1) + cp->timeperframe.denominator /= (clkrc & CLK_SCALE); + return 0; +} + +static int ov7670_s_parm(struct i2c_client *c, struct v4l2_streamparm *parms) +{ + struct v4l2_captureparm *cp = &parms->parm.capture; + struct v4l2_fract *tpf = &cp->timeperframe; + unsigned char clkrc; + int ret, div; + + if (parms->type != V4L2_BUF_TYPE_VIDEO_CAPTURE) + return -EINVAL; + if (cp->extendedmode != 0) + return -EINVAL; + /* + * CLKRC has a reserved bit, so let's preserve it. + */ + ret = ov7670_read(c, REG_CLKRC, &clkrc); + if (ret < 0) + return ret; + if (tpf->numerator == 0 || tpf->denominator == 0) + div = 1; /* Reset to full rate */ + else + div = (tpf->numerator*OV7670_FRAME_RATE)/tpf->denominator; + if (div == 0) + div = 1; + else if (div > CLK_SCALE) + div = CLK_SCALE; + clkrc = (clkrc & 0x80) | div; + tpf->numerator = 1; + tpf->denominator = OV7670_FRAME_RATE/div; + return ov7670_write(c, REG_CLKRC, clkrc); +} + + + +/* + * Code for dealing with controls. + */ + + + + + +static int ov7670_store_cmatrix(struct i2c_client *client, + int matrix[CMATRIX_LEN]) +{ + int i, ret; + unsigned char signbits; + + /* + * Weird crap seems to exist in the upper part of + * the sign bits register, so let's preserve it. + */ + ret = ov7670_read(client, REG_CMATRIX_SIGN, &signbits); + signbits &= 0xc0; + + for (i = 0; i < CMATRIX_LEN; i++) { + unsigned char raw; + + if (matrix[i] < 0) { + signbits |= (1 << i); + if (matrix[i] < -255) + raw = 0xff; + else + raw = (-1 * matrix[i]) & 0xff; + } + else { + if (matrix[i] > 255) + raw = 0xff; + else + raw = matrix[i] & 0xff; + } + ret += ov7670_write(client, REG_CMATRIX_BASE + i, raw); + } + ret += ov7670_write(client, REG_CMATRIX_SIGN, signbits); + return ret; +} + + +/* + * Hue also requires messing with the color matrix. It also requires + * trig functions, which tend not to be well supported in the kernel. + * So here is a simple table of sine values, 0-90 degrees, in steps + * of five degrees. Values are multiplied by 1000. + * + * The following naive approximate trig functions require an argument + * carefully limited to -180 <= theta <= 180. + */ +#define SIN_STEP 5 +static const int ov7670_sin_table[] = { + 0, 87, 173, 258, 342, 422, + 499, 573, 642, 707, 766, 819, + 866, 906, 939, 965, 984, 996, + 1000 +}; + +static int ov7670_sine(int theta) +{ + int chs = 1; + int sine; + + if (theta < 0) { + theta = -theta; + chs = -1; + } + if (theta <= 90) + sine = ov7670_sin_table[theta/SIN_STEP]; + else { + theta -= 90; + sine = 1000 - ov7670_sin_table[theta/SIN_STEP]; + } + return sine*chs; +} + +static int ov7670_cosine(int theta) +{ + theta = 90 - theta; + if (theta > 180) + theta -= 360; + else if (theta < -180) + theta += 360; + return ov7670_sine(theta); +} + + + + +static void ov7670_calc_cmatrix(struct ov7670_info *info, + int matrix[CMATRIX_LEN]) +{ + int i; + /* + * Apply the current saturation setting first. + */ + for (i = 0; i < CMATRIX_LEN; i++) + matrix[i] = (info->fmt->cmatrix[i]*info->sat) >> 7; + /* + * Then, if need be, rotate the hue value. + */ + if (info->hue != 0) { + int sinth, costh, tmpmatrix[CMATRIX_LEN]; + + memcpy(tmpmatrix, matrix, CMATRIX_LEN*sizeof(int)); + sinth = ov7670_sine(info->hue); + costh = ov7670_cosine(info->hue); + + matrix[0] = (matrix[3]*sinth + matrix[0]*costh)/1000; + matrix[1] = (matrix[4]*sinth + matrix[1]*costh)/1000; + matrix[2] = (matrix[5]*sinth + matrix[2]*costh)/1000; + matrix[3] = (matrix[3]*costh - matrix[0]*sinth)/1000; + matrix[4] = (matrix[4]*costh - matrix[1]*sinth)/1000; + matrix[5] = (matrix[5]*costh - matrix[2]*sinth)/1000; + } +} + + + +static int ov7670_t_sat(struct i2c_client *client, int value) +{ + struct ov7670_info *info = i2c_get_clientdata(client); + int matrix[CMATRIX_LEN]; + int ret; + + info->sat = value; + ov7670_calc_cmatrix(info, matrix); + ret = ov7670_store_cmatrix(client, matrix); + return ret; +} + +static int ov7670_q_sat(struct i2c_client *client, __s32 *value) +{ + struct ov7670_info *info = i2c_get_clientdata(client); + + *value = info->sat; + return 0; +} + +static int ov7670_t_hue(struct i2c_client *client, int value) +{ + struct ov7670_info *info = i2c_get_clientdata(client); + int matrix[CMATRIX_LEN]; + int ret; + + if (value < -180 || value > 180) + return -EINVAL; + info->hue = value; + ov7670_calc_cmatrix(info, matrix); + ret = ov7670_store_cmatrix(client, matrix); + return ret; +} + + +static int ov7670_q_hue(struct i2c_client *client, __s32 *value) +{ + struct ov7670_info *info = i2c_get_clientdata(client); + + *value = info->hue; + return 0; +} + + +/* + * Some weird registers seem to store values in a sign/magnitude format! + */ +static unsigned char ov7670_sm_to_abs(unsigned char v) +{ + if ((v & 0x80) == 0) + return v + 128; + else + return 128 - (v & 0x7f); +} + + +static unsigned char ov7670_abs_to_sm(unsigned char v) +{ + if (v > 127) + return v & 0x7f; + else + return (128 - v) | 0x80; +} + +static int ov7670_t_brightness(struct i2c_client *client, int value) +{ + unsigned char com8, v; + int ret; + + ov7670_read(client, REG_COM8, &com8); + com8 &= ~COM8_AEC; + ov7670_write(client, REG_COM8, com8); + v = ov7670_abs_to_sm(value); + ret = ov7670_write(client, REG_BRIGHT, v); + return ret; +} + +static int ov7670_q_brightness(struct i2c_client *client, __s32 *value) +{ + unsigned char v; + int ret = ov7670_read(client, REG_BRIGHT, &v); + + *value = ov7670_sm_to_abs(v); + return ret; +} + +static int ov7670_t_contrast(struct i2c_client *client, int value) +{ + return ov7670_write(client, REG_CONTRAS, (unsigned char) value); +} + +static int ov7670_q_contrast(struct i2c_client *client, __s32 *value) +{ + unsigned char v; + int ret = ov7670_read(client, REG_CONTRAS, &v); + + *value = v; + return ret; +} + +static int ov7670_q_hflip(struct i2c_client *client, __s32 *value) +{ + int ret; + unsigned char v; + + ret = ov7670_read(client, REG_MVFP, &v); + *value = (v & MVFP_MIRROR) == MVFP_MIRROR; + return ret; +} + + +static int ov7670_t_hflip(struct i2c_client *client, int value) +{ + unsigned char v; + int ret; + + ret = ov7670_read(client, REG_MVFP, &v); + if (value) + v |= MVFP_MIRROR; + else + v &= ~MVFP_MIRROR; + msleep(10); /* FIXME */ + ret += ov7670_write(client, REG_MVFP, v); + return ret; +} + + + +static int ov7670_q_vflip(struct i2c_client *client, __s32 *value) +{ + int ret; + unsigned char v; + + ret = ov7670_read(client, REG_MVFP, &v); + *value = (v & MVFP_FLIP) == MVFP_FLIP; + return ret; +} + + +static int ov7670_t_vflip(struct i2c_client *client, int value) +{ + unsigned char v; + int ret; + + ret = ov7670_read(client, REG_MVFP, &v); + if (value) + v |= MVFP_FLIP; + else + v &= ~MVFP_FLIP; + msleep(10); /* FIXME */ + ret += ov7670_write(client, REG_MVFP, v); + return ret; +} + + +static struct ov7670_control { + struct v4l2_queryctrl qc; + int (*query)(struct i2c_client *c, __s32 *value); + int (*tweak)(struct i2c_client *c, int value); +} ov7670_controls[] = +{ + { + .qc = { + .id = V4L2_CID_BRIGHTNESS, + .type = V4L2_CTRL_TYPE_INTEGER, + .name = "Brightness", + .minimum = 0, + .maximum = 255, + .step = 1, + .default_value = 0x80, + .flags = V4L2_CTRL_FLAG_SLIDER + }, + .tweak = ov7670_t_brightness, + .query = ov7670_q_brightness, + }, + { + .qc = { + .id = V4L2_CID_CONTRAST, + .type = V4L2_CTRL_TYPE_INTEGER, + .name = "Contrast", + .minimum = 0, + .maximum = 127, + .step = 1, + .default_value = 0x40, /* XXX ov7670 spec */ + .flags = V4L2_CTRL_FLAG_SLIDER + }, + .tweak = ov7670_t_contrast, + .query = ov7670_q_contrast, + }, + { + .qc = { + .id = V4L2_CID_SATURATION, + .type = V4L2_CTRL_TYPE_INTEGER, + .name = "Saturation", + .minimum = 0, + .maximum = 256, + .step = 1, + .default_value = 0x80, + .flags = V4L2_CTRL_FLAG_SLIDER + }, + .tweak = ov7670_t_sat, + .query = ov7670_q_sat, + }, + { + .qc = { + .id = V4L2_CID_HUE, + .type = V4L2_CTRL_TYPE_INTEGER, + .name = "HUE", + .minimum = -180, + .maximum = 180, + .step = 5, + .default_value = 0, + .flags = V4L2_CTRL_FLAG_SLIDER + }, + .tweak = ov7670_t_hue, + .query = ov7670_q_hue, + }, + { + .qc = { + .id = V4L2_CID_VFLIP, + .type = V4L2_CTRL_TYPE_BOOLEAN, + .name = "Vertical flip", + .minimum = 0, + .maximum = 1, + .step = 1, + .default_value = 0, + }, + .tweak = ov7670_t_vflip, + .query = ov7670_q_vflip, + }, + { + .qc = { + .id = V4L2_CID_HFLIP, + .type = V4L2_CTRL_TYPE_BOOLEAN, + .name = "Horizontal mirror", + .minimum = 0, + .maximum = 1, + .step = 1, + .default_value = 0, + }, + .tweak = ov7670_t_hflip, + .query = ov7670_q_hflip, + }, +}; +#define N_CONTROLS (sizeof(ov7670_controls)/sizeof(ov7670_controls[0])) + +static struct ov7670_control *ov7670_find_control(__u32 id) +{ + int i; + + for (i = 0; i < N_CONTROLS; i++) + if (ov7670_controls[i].qc.id == id) + return ov7670_controls + i; + return NULL; +} + + +static int ov7670_queryctrl(struct i2c_client *client, + struct v4l2_queryctrl *qc) +{ + struct ov7670_control *ctrl = ov7670_find_control(qc->id); + + if (ctrl == NULL) + return -EINVAL; + *qc = ctrl->qc; + return 0; +} + +static int ov7670_g_ctrl(struct i2c_client *client, struct v4l2_control *ctrl) +{ + struct ov7670_control *octrl = ov7670_find_control(ctrl->id); + int ret; + + if (octrl == NULL) + return -EINVAL; + ret = octrl->query(client, &ctrl->value); + if (ret >= 0) + return 0; + return ret; +} + +static int ov7670_s_ctrl(struct i2c_client *client, struct v4l2_control *ctrl) +{ + struct ov7670_control *octrl = ov7670_find_control(ctrl->id); + int ret; + + if (octrl == NULL) + return -EINVAL; + ret = octrl->tweak(client, ctrl->value); + if (ret >= 0) + return 0; + return ret; +} + + + + + + +/* + * Basic i2c stuff. + */ +static struct i2c_driver ov7670_driver; + +static int ov7670_attach(struct i2c_adapter *adapter) +{ + int ret; + struct i2c_client *client; + struct ov7670_info *info; + + /* + * For now: only deal with adapters we recognize. + */ + if (adapter->id != I2C_HW_SMBUS_CAFE) + return -ENODEV; + + client = kzalloc(sizeof (struct i2c_client), GFP_KERNEL); + if (! client) + return -ENOMEM; + client->adapter = adapter; + client->addr = OV7670_I2C_ADDR; + client->driver = &ov7670_driver, + strcpy(client->name, "OV7670"); + /* + * Set up our info structure. + */ + info = kzalloc(sizeof (struct ov7670_info), GFP_KERNEL); + if (! info) { + ret = -ENOMEM; + goto out_free; + } + info->fmt = &ov7670_formats[0]; + info->sat = 128; /* Review this */ + i2c_set_clientdata(client, info); + + /* + * Make sure it's an ov7670 + */ + ret = ov7670_detect(client); + if (ret) + goto out_free_info; + i2c_attach_client(client); + return 0; + + out_free_info: + kfree(info); + out_free: + kfree(client); + return ret; +} + + +static int ov7670_detach(struct i2c_client *client) +{ + i2c_detach_client(client); + kfree(i2c_get_clientdata(client)); + kfree(client); + return 0; +} + + +static int ov7670_command(struct i2c_client *client, unsigned int cmd, + void *arg) +{ + switch (cmd) { + case VIDIOC_INT_G_CHIP_IDENT: + * (enum v4l2_chip_ident *) arg = V4L2_IDENT_OV7670; + return 0; + + case VIDIOC_INT_RESET: + ov7670_reset(client); + return 0; + + case VIDIOC_INT_INIT: + return ov7670_init(client); + + case VIDIOC_ENUM_FMT: + return ov7670_enum_fmt(client, (struct v4l2_fmtdesc *) arg); + case VIDIOC_TRY_FMT: + return ov7670_try_fmt(client, (struct v4l2_format *) arg, NULL, NULL); + case VIDIOC_S_FMT: + return ov7670_s_fmt(client, (struct v4l2_format *) arg); + case VIDIOC_QUERYCTRL: + return ov7670_queryctrl(client, (struct v4l2_queryctrl *) arg); + case VIDIOC_S_CTRL: + return ov7670_s_ctrl(client, (struct v4l2_control *) arg); + case VIDIOC_G_CTRL: + return ov7670_g_ctrl(client, (struct v4l2_control *) arg); + case VIDIOC_S_PARM: + return ov7670_s_parm(client, (struct v4l2_streamparm *) arg); + case VIDIOC_G_PARM: + return ov7670_g_parm(client, (struct v4l2_streamparm *) arg); + } + return -EINVAL; +} + + + +static struct i2c_driver ov7670_driver = { + .driver = { + .name = "ov7670", + }, + .id = I2C_DRIVERID_OV7670, + .class = I2C_CLASS_CAM_DIGITAL, + .attach_adapter = ov7670_attach, + .detach_client = ov7670_detach, + .command = ov7670_command, +}; + + +/* + * Module initialization + */ +static int __init ov7670_mod_init(void) +{ + printk(KERN_NOTICE "OmniVision ov7670 sensor driver, at your service\n"); + return i2c_add_driver(&ov7670_driver); +} + +static void __exit ov7670_mod_exit(void) +{ + i2c_del_driver(&ov7670_driver); +} + +module_init(ov7670_mod_init); +module_exit(ov7670_mod_exit); diff --git a/drivers/media/video/pvrusb2/pvrusb2-context.c b/drivers/media/video/pvrusb2/pvrusb2-context.c index f129f316d20..cf129746205 100644 --- a/drivers/media/video/pvrusb2/pvrusb2-context.c +++ b/drivers/media/video/pvrusb2/pvrusb2-context.c @@ -45,16 +45,21 @@ static void pvr2_context_trigger_poll(struct pvr2_context *mp) } -static void pvr2_context_poll(struct pvr2_context *mp) +static void pvr2_context_poll(struct work_struct *work) { + struct pvr2_context *mp = + container_of(work, struct pvr2_context, workpoll); pvr2_context_enter(mp); do { pvr2_hdw_poll(mp->hdw); } while (0); pvr2_context_exit(mp); } -static void pvr2_context_setup(struct pvr2_context *mp) +static void pvr2_context_setup(struct work_struct *work) { + struct pvr2_context *mp = + container_of(work, struct pvr2_context, workinit); + pvr2_context_enter(mp); do { if (!pvr2_hdw_dev_ok(mp->hdw)) break; pvr2_hdw_setup(mp->hdw); @@ -92,8 +97,8 @@ struct pvr2_context *pvr2_context_create( } mp->workqueue = create_singlethread_workqueue("pvrusb2"); - INIT_WORK(&mp->workinit,(void (*)(void*))pvr2_context_setup,mp); - INIT_WORK(&mp->workpoll,(void (*)(void*))pvr2_context_poll,mp); + INIT_WORK(&mp->workinit, pvr2_context_setup); + INIT_WORK(&mp->workpoll, pvr2_context_poll); queue_work(mp->workqueue,&mp->workinit); done: return mp; diff --git a/drivers/media/video/pvrusb2/pvrusb2-cx2584x-v4l.c b/drivers/media/video/pvrusb2/pvrusb2-cx2584x-v4l.c index df8feac16ae..848fb233d80 100644 --- a/drivers/media/video/pvrusb2/pvrusb2-cx2584x-v4l.c +++ b/drivers/media/video/pvrusb2/pvrusb2-cx2584x-v4l.c @@ -221,7 +221,7 @@ static unsigned int decoder_describe(struct pvr2_v4l_cx2584x *ctxt, static void decoder_reset(struct pvr2_v4l_cx2584x *ctxt) { int ret; - ret = pvr2_i2c_client_cmd(ctxt->client,VIDIOC_INT_RESET,0); + ret = pvr2_i2c_client_cmd(ctxt->client,VIDIOC_INT_RESET,NULL); pvr2_trace(PVR2_TRACE_CHIPS,"i2c cx25840 decoder_reset (ret=%d)",ret); } @@ -260,6 +260,22 @@ int pvr2_i2c_cx2584x_v4l_setup(struct pvr2_hdw *hdw, sizeof(decoder_ops[0]))) - 1; hdw->decoder_ctrl = &ctxt->ctrl; cp->handler = &ctxt->handler; + { + /* + Mike Isely <isely@pobox.com> 19-Nov-2006 - This bit + of nuttiness for cx25840 causes that module to + correctly set up its video scaling. This is really + a problem in the cx25840 module itself, but we work + around it here. The problem has not been seen in + ivtv because there VBI is supported and set up. We + don't do VBI here (at least not yet) and thus we + never attempted to even set it up. + */ + struct v4l2_format fmt; + memset(&fmt,0,sizeof(fmt)); + fmt.type = V4L2_BUF_TYPE_SLICED_VBI_CAPTURE; + pvr2_i2c_client_cmd(ctxt->client,VIDIOC_S_FMT,&fmt); + } pvr2_trace(PVR2_TRACE_CHIPS,"i2c 0x%x cx2584x V4L2 handler set up", cp->client->addr); return !0; diff --git a/drivers/media/video/pvrusb2/pvrusb2-hdw.c b/drivers/media/video/pvrusb2/pvrusb2-hdw.c index f920e0ccacd..d2004965187 100644 --- a/drivers/media/video/pvrusb2/pvrusb2-hdw.c +++ b/drivers/media/video/pvrusb2/pvrusb2-hdw.c @@ -356,28 +356,6 @@ static int ctrl_freq_set(struct pvr2_ctrl *cptr,int m,int v) return 0; } -static int ctrl_hres_max_get(struct pvr2_ctrl *cptr,int *vp) -{ - /* If we're dealing with a 24xxx device, force the horizontal - maximum to be 720 no matter what, since we can't get the device - to work properly with any other value. Otherwise just return - the normal value. */ - *vp = cptr->info->def.type_int.max_value; - if (cptr->hdw->hdw_type == PVR2_HDW_TYPE_24XXX) *vp = 720; - return 0; -} - -static int ctrl_hres_min_get(struct pvr2_ctrl *cptr,int *vp) -{ - /* If we're dealing with a 24xxx device, force the horizontal - minimum to be 720 no matter what, since we can't get the device - to work properly with any other value. Otherwise just return - the normal value. */ - *vp = cptr->info->def.type_int.min_value; - if (cptr->hdw->hdw_type == PVR2_HDW_TYPE_24XXX) *vp = 720; - return 0; -} - static int ctrl_vres_max_get(struct pvr2_ctrl *cptr,int *vp) { /* Actual maximum depends on the video standard in effect. */ @@ -758,10 +736,6 @@ static const struct pvr2_ctl_info control_defs[] = { .default_value = 720, DEFREF(res_hor), DEFINT(19,720), - /* Hook in check for clamp on horizontal resolution in - order to avoid unsolved problem involving cx25840. */ - .get_max_value = ctrl_hres_max_get, - .get_min_value = ctrl_hres_min_get, },{ .desc = "Vertical capture resolution", .name = "resolution_ver", @@ -1953,8 +1927,8 @@ struct pvr2_hdw *pvr2_hdw_create(struct usb_interface *intf, return hdw; fail: if (hdw) { - if (hdw->ctl_read_urb) usb_free_urb(hdw->ctl_read_urb); - if (hdw->ctl_write_urb) usb_free_urb(hdw->ctl_write_urb); + usb_free_urb(hdw->ctl_read_urb); + usb_free_urb(hdw->ctl_write_urb); if (hdw->ctl_read_buffer) kfree(hdw->ctl_read_buffer); if (hdw->ctl_write_buffer) kfree(hdw->ctl_write_buffer); if (hdw->controls) kfree(hdw->controls); @@ -2575,12 +2549,10 @@ static void pvr2_ctl_timeout(unsigned long data) struct pvr2_hdw *hdw = (struct pvr2_hdw *)data; if (hdw->ctl_write_pend_flag || hdw->ctl_read_pend_flag) { hdw->ctl_timeout_flag = !0; - if (hdw->ctl_write_pend_flag && hdw->ctl_write_urb) { + if (hdw->ctl_write_pend_flag) usb_unlink_urb(hdw->ctl_write_urb); - } - if (hdw->ctl_read_pend_flag && hdw->ctl_read_urb) { + if (hdw->ctl_read_pend_flag) usb_unlink_urb(hdw->ctl_read_urb); - } } } diff --git a/drivers/media/video/pvrusb2/pvrusb2-i2c-core.c b/drivers/media/video/pvrusb2/pvrusb2-i2c-core.c index 3b9012f8e38..f9bb41d8f4f 100644 --- a/drivers/media/video/pvrusb2/pvrusb2-i2c-core.c +++ b/drivers/media/video/pvrusb2/pvrusb2-i2c-core.c @@ -185,6 +185,79 @@ static int pvr2_i2c_basic_op(struct pvr2_hdw *hdw, } } + +/* This is a special entry point for cases of I2C transaction attempts to + the IR receiver. The implementation here simulates the IR receiver by + issuing a command to the FX2 firmware and using that response to return + what the real I2C receiver would have returned. We use this for 24xxx + devices, where the IR receiver chip has been removed and replaced with + FX2 related logic. */ +static int i2c_24xxx_ir(struct pvr2_hdw *hdw, + u8 i2c_addr,u8 *wdata,u16 wlen,u8 *rdata,u16 rlen) +{ + u8 dat[4]; + unsigned int stat; + + if (!(rlen || wlen)) { + /* This is a probe attempt. Just let it succeed. */ + return 0; + } + + /* We don't understand this kind of transaction */ + if ((wlen != 0) || (rlen == 0)) return -EIO; + + if (rlen < 3) { + /* Mike Isely <isely@pobox.com> Appears to be a probe + attempt from lirc. Just fill in zeroes and return. If + we try instead to do the full transaction here, then bad + things seem to happen within the lirc driver module + (version 0.8.0-7 sources from Debian, when run under + vanilla 2.6.17.6 kernel) - and I don't have the patience + to chase it down. */ + if (rlen > 0) rdata[0] = 0; + if (rlen > 1) rdata[1] = 0; + return 0; + } + + /* Issue a command to the FX2 to read the IR receiver. */ + LOCK_TAKE(hdw->ctl_lock); do { + hdw->cmd_buffer[0] = 0xec; + stat = pvr2_send_request(hdw, + hdw->cmd_buffer,1, + hdw->cmd_buffer,4); + dat[0] = hdw->cmd_buffer[0]; + dat[1] = hdw->cmd_buffer[1]; + dat[2] = hdw->cmd_buffer[2]; + dat[3] = hdw->cmd_buffer[3]; + } while (0); LOCK_GIVE(hdw->ctl_lock); + + /* Give up if that operation failed. */ + if (stat != 0) return stat; + + /* Mangle the results into something that looks like the real IR + receiver. */ + rdata[2] = 0xc1; + if (dat[0] != 1) { + /* No code received. */ + rdata[0] = 0; + rdata[1] = 0; + } else { + u16 val; + /* Mash the FX2 firmware-provided IR code into something + that the normal i2c chip-level driver expects. */ + val = dat[1]; + val <<= 8; + val |= dat[2]; + val >>= 1; + val &= ~0x0003; + val |= 0x8000; + rdata[0] = (val >> 8) & 0xffu; + rdata[1] = val & 0xffu; + } + + return 0; +} + /* This is a special entry point that is entered if an I2C operation is attempted to a wm8775 chip on model 24xxx hardware. Autodetect of this part doesn't work, but we know it is really there. So let's look for @@ -887,17 +960,17 @@ void pvr2_i2c_core_init(struct pvr2_hdw *hdw) { unsigned int idx; - // The default action for all possible I2C addresses is just to do - // the transfer normally. + /* The default action for all possible I2C addresses is just to do + the transfer normally. */ for (idx = 0; idx < PVR2_I2C_FUNC_CNT; idx++) { hdw->i2c_func[idx] = pvr2_i2c_basic_op; } - // If however we're dealing with new hardware, insert some hacks in - // the I2C transfer stack to let things work better. + /* However, deal with various special cases for 24xxx hardware. */ if (hdw->hdw_type == PVR2_HDW_TYPE_24XXX) { hdw->i2c_func[0x1b] = i2c_hack_wm8775; hdw->i2c_func[0x44] = i2c_hack_cx25840; + hdw->i2c_func[0x18] = i2c_24xxx_ir; } // Configure the adapter and set up everything else related to it. diff --git a/drivers/media/video/pvrusb2/pvrusb2-io.c b/drivers/media/video/pvrusb2/pvrusb2-io.c index 70aa63eba0c..57fb3203354 100644 --- a/drivers/media/video/pvrusb2/pvrusb2-io.c +++ b/drivers/media/video/pvrusb2/pvrusb2-io.c @@ -289,7 +289,7 @@ static void pvr2_buffer_done(struct pvr2_buffer *bp) pvr2_buffer_set_none(bp); bp->signature = 0; bp->stream = NULL; - if (bp->purb) usb_free_urb(bp->purb); + usb_free_urb(bp->purb); pvr2_trace(PVR2_TRACE_BUF_POOL,"/*---TRACE_FLOW---*/" " bufferDone %p",bp); } diff --git a/drivers/media/video/pvrusb2/pvrusb2-v4l2.c b/drivers/media/video/pvrusb2/pvrusb2-v4l2.c index 97e974d9b9c..bb40e908597 100644 --- a/drivers/media/video/pvrusb2/pvrusb2-v4l2.c +++ b/drivers/media/video/pvrusb2/pvrusb2-v4l2.c @@ -711,8 +711,8 @@ static void pvr2_v4l2_dev_destroy(struct pvr2_v4l2_dev *dip) dip->devbase.minor,pvr2_config_get_name(dip->config)); /* Paranoia */ - dip->v4lp = 0; - dip->stream = 0; + dip->v4lp = NULL; + dip->stream = NULL; /* Actual deallocation happens later when all internal references are gone. */ @@ -1076,7 +1076,7 @@ struct pvr2_v4l2 *pvr2_v4l2_create(struct pvr2_context *mnp) vp->vdev = kmalloc(sizeof(*vp->vdev),GFP_KERNEL); if (!vp->vdev) { kfree(vp); - return 0; + return NULL; } memset(vp->vdev,0,sizeof(*vp->vdev)); pvr2_channel_init(&vp->channel,mnp); diff --git a/drivers/media/video/pwc/pwc-if.c b/drivers/media/video/pwc/pwc-if.c index 46c11483088..a996aad7927 100644 --- a/drivers/media/video/pwc/pwc-if.c +++ b/drivers/media/video/pwc/pwc-if.c @@ -866,11 +866,9 @@ int pwc_isoc_init(struct pwc_device *pdev) } if (ret) { /* De-allocate in reverse order */ - while (i >= 0) { - if (pdev->sbuf[i].urb != NULL) - usb_free_urb(pdev->sbuf[i].urb); + while (i--) { + usb_free_urb(pdev->sbuf[i].urb); pdev->sbuf[i].urb = NULL; - i--; } return ret; } @@ -1095,8 +1093,7 @@ static int pwc_video_open(struct inode *inode, struct file *file) PWC_DEBUG_OPEN(">> video_open called(vdev = 0x%p).\n", vdev); pdev = (struct pwc_device *)vdev->priv; - if (pdev == NULL) - BUG(); + BUG_ON(!pdev); if (pdev->vopen) { PWC_DEBUG_OPEN("I'm busy, someone is using the device.\n"); return -EBUSY; diff --git a/drivers/media/video/saa6588.c b/drivers/media/video/saa6588.c index a81285ca7d5..92eabf88a09 100644 --- a/drivers/media/video/saa6588.c +++ b/drivers/media/video/saa6588.c @@ -212,8 +212,10 @@ static void read_from_buf(struct saa6588 *s, struct rds_command *a) if (rd_blocks > s->block_count) rd_blocks = s->block_count; - if (!rd_blocks) + if (!rd_blocks) { + spin_unlock_irqrestore(&s->lock, flags); return; + } for (i = 0; i < rd_blocks; i++) { if (block_to_user_buf(s, buf_ptr)) { @@ -322,9 +324,9 @@ static void saa6588_timer(unsigned long data) schedule_work(&s->work); } -static void saa6588_work(void *data) +static void saa6588_work(struct work_struct *work) { - struct saa6588 *s = (struct saa6588 *)data; + struct saa6588 *s = container_of(work, struct saa6588, work); saa6588_i2c_poll(s); mod_timer(&s->timer, jiffies + msecs_to_jiffies(20)); @@ -417,7 +419,7 @@ static int saa6588_attach(struct i2c_adapter *adap, int addr, int kind) saa6588_configure(s); /* start polling via eventd */ - INIT_WORK(&s->work, saa6588_work, s); + INIT_WORK(&s->work, saa6588_work); init_timer(&s->timer); s->timer.function = saa6588_timer; s->timer.data = (unsigned long)s; diff --git a/drivers/media/video/saa7115.c b/drivers/media/video/saa7115.c index c5719f7bd1a..c2374ed7ba9 100644 --- a/drivers/media/video/saa7115.c +++ b/drivers/media/video/saa7115.c @@ -851,7 +851,7 @@ static int saa711x_set_size(struct i2c_client *client, int width, int height) /* On 60Hz, it is using a higher Vertical Output Size */ if (!is_50hz) - res+=(VRES_60HZ-480)>>1; + res += (VRES_60HZ - 480) >> 1; /* height */ saa711x_write(client, R_CE_B_VERT_OUTPUT_WINDOW_LENGTH, @@ -907,7 +907,7 @@ static int saa711x_set_size(struct i2c_client *client, int width, int height) /* Activates task "B" */ saa711x_write(client, R_80_GLOBAL_CNTL_1, - saa711x_read(client,R_80_GLOBAL_CNTL_1)|0x20); + saa711x_read(client,R_80_GLOBAL_CNTL_1) | 0x20); return 0; } @@ -932,11 +932,11 @@ static void saa711x_set_v4lstd(struct i2c_client *client, v4l2_std_id std) if (std & V4L2_STD_525_60) { v4l_dbg(1, debug, client, "decoder set standard 60 Hz\n"); saa711x_writeregs(client, saa7115_cfg_60hz_video); - saa711x_set_size(client,720,480); + saa711x_set_size(client, 720, 480); } else { v4l_dbg(1, debug, client, "decoder set standard 50 Hz\n"); saa711x_writeregs(client, saa7115_cfg_50hz_video); - saa711x_set_size(client,720,576); + saa711x_set_size(client, 720, 576); } /* Register 0E - Bits D6-D4 on NO-AUTO mode @@ -1464,19 +1464,24 @@ static int saa711x_attach(struct i2c_adapter *adapter, int address, int kind) client->driver = &i2c_driver_saa711x; snprintf(client->name, sizeof(client->name) - 1, "saa7115"); - v4l_dbg(1, debug, client, "detecting saa7115 client on address 0x%x\n", address << 1); - - for (i=0;i<0x0f;i++) { + for (i = 0; i < 0x0f; i++) { saa711x_write(client, 0, i); - name[i] = (saa711x_read(client, 0) &0x0f) +'0'; - if (name[i]>'9') - name[i]+='a'-'9'-1; + name[i] = (saa711x_read(client, 0) & 0x0f) + '0'; + if (name[i] > '9') + name[i] += 'a' - '9' - 1; } - name[i]='\0'; + name[i] = '\0'; saa711x_write(client, 0, 5); chip_id = saa711x_read(client, 0) & 0x0f; + /* Check whether this chip is part of the saa711x series */ + if (memcmp(name, "1f711", 5)) { + v4l_dbg(1, debug, client, "chip found @ 0x%x (ID %s) does not match a known saa711x chip.\n", + address << 1, name); + return 0; + } + snprintf(client->name, sizeof(client->name) - 1, "saa711%d",chip_id); v4l_info(client, "saa711%d found (%s) @ 0x%x (%s)\n", chip_id, name, address << 1, adapter->name); diff --git a/drivers/media/video/saa7134/saa7134-alsa.c b/drivers/media/video/saa7134/saa7134-alsa.c index 4abf5c03a74..ffb0f647a86 100644 --- a/drivers/media/video/saa7134/saa7134-alsa.c +++ b/drivers/media/video/saa7134/saa7134-alsa.c @@ -1,10 +1,6 @@ /* * SAA713x ALSA support for V4L * - * - * Caveats: - * - Volume doesn't work (it's always at max) - * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation, version 2 @@ -614,13 +610,18 @@ static int snd_card_saa7134_capture_open(struct snd_pcm_substream * substream) snd_card_saa7134_pcm_t *pcm; snd_card_saa7134_t *saa7134 = snd_pcm_substream_chip(substream); struct saa7134_dev *dev = saa7134->dev; - int err; + int amux, err; mutex_lock(&dev->dmasound.lock); dev->dmasound.read_count = 0; dev->dmasound.read_offset = 0; + amux = dev->input->amux; + if ((amux < 1) || (amux > 3)) + amux = 1; + dev->dmasound.input = amux - 1; + mutex_unlock(&dev->dmasound.lock); pcm = kzalloc(sizeof(*pcm), GFP_KERNEL); @@ -713,6 +714,8 @@ static int snd_saa7134_volume_put(struct snd_kcontrol * kcontrol, struct snd_ctl_elem_value * ucontrol) { snd_card_saa7134_t *chip = snd_kcontrol_chip(kcontrol); + struct saa7134_dev *dev = chip->dev; + int change, addr = kcontrol->private_value; int left, right; @@ -727,10 +730,52 @@ static int snd_saa7134_volume_put(struct snd_kcontrol * kcontrol, if (right > 20) right = 20; spin_lock_irq(&chip->mixer_lock); - change = chip->mixer_volume[addr][0] != left || - chip->mixer_volume[addr][1] != right; - chip->mixer_volume[addr][0] = left; - chip->mixer_volume[addr][1] = right; + change = 0; + if (chip->mixer_volume[addr][0] != left) { + change = 1; + right = left; + } + if (chip->mixer_volume[addr][1] != right) { + change = 1; + left = right; + } + if (change) { + switch (dev->pci->device) { + case PCI_DEVICE_ID_PHILIPS_SAA7134: + switch (addr) { + case MIXER_ADDR_TVTUNER: + left = 20; + break; + case MIXER_ADDR_LINE1: + saa_andorb(SAA7134_ANALOG_IO_SELECT, 0x10, + (left > 10) ? 0x00 : 0x10); + break; + case MIXER_ADDR_LINE2: + saa_andorb(SAA7134_ANALOG_IO_SELECT, 0x20, + (left > 10) ? 0x00 : 0x20); + break; + } + break; + case PCI_DEVICE_ID_PHILIPS_SAA7133: + case PCI_DEVICE_ID_PHILIPS_SAA7135: + switch (addr) { + case MIXER_ADDR_TVTUNER: + left = 20; + break; + case MIXER_ADDR_LINE1: + saa_andorb(0x0594, 0x10, + (left > 10) ? 0x00 : 0x10); + break; + case MIXER_ADDR_LINE2: + saa_andorb(0x0594, 0x20, + (left > 10) ? 0x00 : 0x20); + break; + } + break; + } + chip->mixer_volume[addr][0] = left; + chip->mixer_volume[addr][1] = right; + } spin_unlock_irq(&chip->mixer_lock); return change; } diff --git a/drivers/media/video/saa7134/saa7134-cards.c b/drivers/media/video/saa7134/saa7134-cards.c index c9d8e3b9cc3..4dead84aff4 100644 --- a/drivers/media/video/saa7134/saa7134-cards.c +++ b/drivers/media/video/saa7134/saa7134-cards.c @@ -2462,14 +2462,17 @@ struct saa7134_board saa7134_boards[] = { .vmux = 1, .amux = TV, .tv = 1, + .gpio = 0x0000000, },{ .name = name_comp1, .vmux = 3, .amux = LINE2, + .gpio = 0x0200000, },{ .name = name_svideo, .vmux = 8, .amux = LINE2, + .gpio = 0x0200000, }}, .radio = { .name = name_radio, @@ -2969,7 +2972,7 @@ struct saa7134_board saa7134_boards[] = { /* Petr Baudis <pasky@ucw.cz> */ .name = "AVerMedia TV Hybrid A16AR", .audio_clock = 0x187de7, - .tuner_type = TUNER_PHILIPS_TDA8290, /* untested */ + .tuner_type = TUNER_PHILIPS_TD1316, /* untested */ .radio_type = TUNER_TEA5767, /* untested */ .tuner_addr = ADDR_UNSET, .radio_addr = ADDR_UNSET, @@ -3022,6 +3025,158 @@ struct saa7134_board saa7134_boards[] = { .amux = LINE1, }, }, + [SAA7134_BOARD_PINNACLE_PCTV_310i] = { + .name = "Pinnacle PCTV 310i", + .audio_clock = 0x00187de7, + .tuner_type = TUNER_PHILIPS_TDA8290, + .radio_type = UNSET, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .mpeg = SAA7134_MPEG_DVB, + .gpiomask = 0x000200000, + .inputs = {{ + .name = name_tv, + .vmux = 4, + .amux = TV, + .tv = 1, + },{ + .name = name_comp1, + .vmux = 1, + .amux = LINE2, + },{ + .name = name_comp2, + .vmux = 0, + .amux = LINE2, + },{ + .name = name_svideo, + .vmux = 8, + .amux = LINE2, + }}, + .radio = { + .name = name_radio, + .amux = TV, + .gpio = 0x0200000, + }, + }, + [SAA7134_BOARD_AVERMEDIA_STUDIO_507] = { + /* Mikhail Fedotov <mo_fedotov@mail.ru> */ + .name = "Avermedia AVerTV Studio 507", + .audio_clock = 0x00187de7, + .tuner_type = TUNER_PHILIPS_FM1256_IH3, + .radio_type = UNSET, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .tda9887_conf = TDA9887_PRESENT, + .gpiomask = 0x03, + .inputs = {{ + .name = name_tv, + .vmux = 1, + .amux = TV, + .tv = 1, + .gpio = 0x00, + },{ + .name = name_comp1, + .vmux = 0, + .amux = LINE2, + .gpio = 0x00, + },{ + .name = name_comp2, + .vmux = 3, + .amux = LINE2, + .gpio = 0x00, + },{ + .name = name_svideo, + .vmux = 8, + .amux = LINE2, + .gpio = 0x00, + }}, + .radio = { + .name = name_radio, + .amux = LINE2, + .gpio = 0x01, + }, + .mute = { + .name = name_mute, + .amux = LINE1, + .gpio = 0x00, + }, + }, + [SAA7134_BOARD_VIDEOMATE_DVBT_200A] = { + /* Francis Barber <fedora@barber-family.id.au> */ + .name = "Compro Videomate DVB-T200A", + .audio_clock = 0x00187de7, + .tuner_type = TUNER_ABSENT, + .radio_type = UNSET, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .tda9887_conf = TDA9887_PRESENT | TDA9887_PORT1_ACTIVE, + .mpeg = SAA7134_MPEG_DVB, + .inputs = {{ + .name = name_tv, + .vmux = 3, + .amux = TV, + .tv = 1, + },{ + .name = name_comp1, + .vmux = 1, + .amux = LINE2, + },{ + .name = name_svideo, + .vmux = 8, + .amux = LINE2, + }}, + }, + [SAA7134_BOARD_HAUPPAUGE_HVR1110] = { + /* Thomas Genty <tomlohave@gmail.com> */ + .name = "Hauppauge WinTV-HVR1110 DVB-T/Hybrid", + .audio_clock = 0x00187de7, + .tuner_type = TUNER_PHILIPS_TDA8290, + .radio_type = UNSET, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .mpeg = SAA7134_MPEG_DVB, + .inputs = {{ + .name = name_tv, + .vmux = 1, + .amux = TV, + .tv = 1, + },{ + .name = name_comp1, + .vmux = 3, + .amux = LINE2, /* FIXME: audio doesn't work on svideo/composite */ + },{ + .name = name_svideo, + .vmux = 8, + .amux = LINE2, /* FIXME: audio doesn't work on svideo/composite */ + }}, + .radio = { + .name = name_radio, + .amux = TV, + }, + }, + [SAA7134_BOARD_CINERGY_HT_PCMCIA] = { + .name = "Terratec Cinergy HT PCMCIA", + .audio_clock = 0x00187de7, + .tuner_type = TUNER_PHILIPS_TDA8290, + .radio_type = UNSET, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .mpeg = SAA7134_MPEG_DVB, + .inputs = {{ + .name = name_tv, + .vmux = 1, + .amux = TV, + .tv = 1, + },{ + .name = name_comp1, + .vmux = 0, + .amux = LINE1, + },{ + .name = name_svideo, + .vmux = 6, + .amux = LINE1, + }}, + }, }; const unsigned int saa7134_bcount = ARRAY_SIZE(saa7134_boards); @@ -3631,6 +3786,36 @@ struct pci_device_id saa7134_pci_tbl[] = { .subdevice = 0x4860, .driver_data = SAA7134_BOARD_ASUS_EUROPA2_HYBRID, },{ + .vendor = PCI_VENDOR_ID_PHILIPS, + .device = PCI_DEVICE_ID_PHILIPS_SAA7133, + .subvendor = 0x11bd, + .subdevice = 0x002f, + .driver_data = SAA7134_BOARD_PINNACLE_PCTV_310i, + },{ + .vendor = PCI_VENDOR_ID_PHILIPS, + .device = PCI_DEVICE_ID_PHILIPS_SAA7133, + .subvendor = 0x1461, /* Avermedia Technologies Inc */ + .subdevice = 0x9715, + .driver_data = SAA7134_BOARD_AVERMEDIA_STUDIO_507, + },{ + .vendor = PCI_VENDOR_ID_PHILIPS, + .device = PCI_DEVICE_ID_PHILIPS_SAA7133, + .subvendor = 0x1043, + .subdevice = 0x4876, + .driver_data = SAA7134_BOARD_ASUSTeK_P7131_DUAL, + },{ + .vendor = PCI_VENDOR_ID_PHILIPS, + .device = PCI_DEVICE_ID_PHILIPS_SAA7133, + .subvendor = 0x0070, + .subdevice = 0x6701, + .driver_data = SAA7134_BOARD_HAUPPAUGE_HVR1110, + },{ + .vendor = PCI_VENDOR_ID_PHILIPS, + .device = PCI_DEVICE_ID_PHILIPS_SAA7133, + .subvendor = 0x153b, + .subdevice = 0x1172, + .driver_data = SAA7134_BOARD_CINERGY_HT_PCMCIA, + },{ /* --- boards without eeprom + subsystem ID --- */ .vendor = PCI_VENDOR_ID_PHILIPS, .device = PCI_DEVICE_ID_PHILIPS_SAA7134, @@ -3717,13 +3902,16 @@ int saa7134_board_init1(struct saa7134_dev *dev) case SAA7134_BOARD_AVERMEDIA_305: case SAA7134_BOARD_AVERMEDIA_STUDIO_307: case SAA7134_BOARD_AVERMEDIA_307: + case SAA7134_BOARD_AVERMEDIA_STUDIO_507: case SAA7134_BOARD_AVERMEDIA_GO_007_FM: + case SAA7134_BOARD_AVERMEDIA_777: /* case SAA7134_BOARD_SABRENT_SBTTVFM: */ /* not finished yet */ case SAA7134_BOARD_VIDEOMATE_TV_PVR: case SAA7134_BOARD_VIDEOMATE_GOLD_PLUS: case SAA7134_BOARD_VIDEOMATE_TV_GOLD_PLUSII: case SAA7134_BOARD_VIDEOMATE_DVBT_300: case SAA7134_BOARD_VIDEOMATE_DVBT_200: + case SAA7134_BOARD_VIDEOMATE_DVBT_200A: case SAA7134_BOARD_MANLI_MTV001: case SAA7134_BOARD_MANLI_MTV002: case SAA7134_BOARD_BEHOLD_409FM: @@ -3734,6 +3922,7 @@ int saa7134_board_init1(struct saa7134_dev *dev) case SAA7134_BOARD_FLYDVBT_LR301: case SAA7134_BOARD_FLYDVBTDUO: case SAA7134_BOARD_PROTEUS_2309: + case SAA7134_BOARD_AVERMEDIA_A16AR: dev->has_remote = SAA7134_REMOTE_GPIO; break; case SAA7134_BOARD_FLYDVBS_LR300: @@ -3772,7 +3961,6 @@ int saa7134_board_init1(struct saa7134_dev *dev) saa_writeb(SAA7134_GPIO_GPMODE3, 0x08); saa_writeb(SAA7134_GPIO_GPSTATUS3, 0x00); break; - case SAA7134_BOARD_AVERMEDIA_A16AR: case SAA7134_BOARD_AVERMEDIA_CARDBUS: /* power-up tuner chip */ saa_andorl(SAA7134_GPIO_GPMODE0 >> 2, 0xffffffff, 0xffffffff); @@ -3792,7 +3980,9 @@ int saa7134_board_init1(struct saa7134_dev *dev) break; /* i2c remotes */ case SAA7134_BOARD_PINNACLE_PCTV_110i: + case SAA7134_BOARD_PINNACLE_PCTV_310i: case SAA7134_BOARD_UPMOST_PURPLE_TV: + case SAA7134_BOARD_HAUPPAUGE_HVR1110: dev->has_remote = SAA7134_REMOTE_I2C; break; case SAA7134_BOARD_AVERMEDIA_A169_B: @@ -3923,9 +4113,11 @@ int saa7134_board_init2(struct saa7134_dev *dev) } break; case SAA7134_BOARD_PHILIPS_TIGER: + case SAA7134_BOARD_PINNACLE_PCTV_310i: case SAA7134_BOARD_TEVION_DVBT_220RF: case SAA7134_BOARD_ASUSTeK_P7131_DUAL: case SAA7134_BOARD_MEDION_MD8800_QUADRO: + case SAA7134_BOARD_HAUPPAUGE_HVR1110: /* this is a hybrid board, initialize to analog mode * and configure firmware eeprom address */ @@ -3951,6 +4143,14 @@ int saa7134_board_init2(struct saa7134_dev *dev) i2c_transfer(&dev->i2c_adap, &msg, 1); } break; + case SAA7134_BOARD_CINERGY_HT_PCMCIA: + /* make the tda10046 find its eeprom */ + { + u8 data[] = { 0x3c, 0x33, 0x60}; + struct i2c_msg msg = {.addr=0x08, .flags=0, .buf=data, .len = sizeof(data)}; + i2c_transfer(&dev->i2c_adap, &msg, 1); + } + break; case SAA7134_BOARD_KWORLD_ATSC110: { /* enable tuner */ @@ -3963,6 +4163,29 @@ int saa7134_board_init2(struct saa7134_dev *dev) dev->name, i); } break; + case SAA7134_BOARD_VIDEOMATE_DVBT_200: + case SAA7134_BOARD_VIDEOMATE_DVBT_200A: + /* The T200 and the T200A share the same pci id. Consequently, + * we are going to query eeprom to try to find out which one we + * are actually looking at. */ + + /* Don't do this if the board was specifically selected with an + * insmod option or if we have the default configuration T200*/ + if(!dev->autodetected || (dev->eedata[0x41] == 0xd0)) + break; + if(dev->eedata[0x41] == 0x02) { + /* Reconfigure board as T200A */ + dev->board = SAA7134_BOARD_VIDEOMATE_DVBT_200A; + dev->tuner_type = saa7134_boards[dev->board].tuner_type; + dev->tda9887_conf = saa7134_boards[dev->board].tda9887_conf; + printk(KERN_INFO "%s: Reconfigured board as %s\n", + dev->name, saa7134_boards[dev->board].name); + } else { + printk(KERN_WARNING "%s: Unexpected tuner type info: %x in eeprom\n", + dev->name, dev->eedata[0x41]); + break; + } + break; } return 0; } diff --git a/drivers/media/video/saa7134/saa7134-core.c b/drivers/media/video/saa7134/saa7134-core.c index 5c9e63dfbea..ed038fff3b4 100644 --- a/drivers/media/video/saa7134/saa7134-core.c +++ b/drivers/media/video/saa7134/saa7134-core.c @@ -889,15 +889,16 @@ static int __devinit saa7134_initdev(struct pci_dev *pci_dev, must_configure_manually(); dev->board = SAA7134_BOARD_UNKNOWN; } + dev->autodetected = card[dev->nr] != dev->board; dev->tuner_type = saa7134_boards[dev->board].tuner_type; dev->tda9887_conf = saa7134_boards[dev->board].tda9887_conf; if (UNSET != tuner[dev->nr]) dev->tuner_type = tuner[dev->nr]; - printk(KERN_INFO "%s: subsystem: %04x:%04x, board: %s [card=%d,%s]\n", - dev->name,pci_dev->subsystem_vendor, - pci_dev->subsystem_device,saa7134_boards[dev->board].name, - dev->board, card[dev->nr] == dev->board ? - "insmod option" : "autodetected"); + printk(KERN_INFO "%s: subsystem: %04x:%04x, board: %s [card=%d,%s]\n", + dev->name,pci_dev->subsystem_vendor, + pci_dev->subsystem_device,saa7134_boards[dev->board].name, + dev->board, dev->autodetected ? + "autodetected" : "insmod option"); /* get mmio */ if (!request_mem_region(pci_resource_start(pci_dev,0), diff --git a/drivers/media/video/saa7134/saa7134-dvb.c b/drivers/media/video/saa7134/saa7134-dvb.c index 1ba53b525ad..fa833987909 100644 --- a/drivers/media/video/saa7134/saa7134-dvb.c +++ b/drivers/media/video/saa7134/saa7134-dvb.c @@ -50,6 +50,10 @@ static unsigned int antenna_pwr = 0; module_param(antenna_pwr, int, 0444); MODULE_PARM_DESC(antenna_pwr,"enable antenna power (Pinnacle 300i)"); +static int use_frontent = 0; +module_param(use_frontent, int, 0644); +MODULE_PARM_DESC(use_frontent,"for cards with multiple frontends (0: terrestrial, 1: satellite)"); + /* ------------------------------------------------------------------ */ static int pinnacle_antenna_pwr(struct saa7134_dev *dev, int on) { @@ -293,7 +297,7 @@ static int philips_tu1216_tuner_60_set_params(struct dvb_frontend *fe, struct dv return philips_tda6651_pll_set(0x60, fe, params); } -static int philips_tu1216_request_firmware(struct dvb_frontend *fe, +static int philips_tda1004x_request_firmware(struct dvb_frontend *fe, const struct firmware **fw, char *name) { struct saa7134_dev *dev = fe->dvb->priv; @@ -308,7 +312,7 @@ static struct tda1004x_config philips_tu1216_60_config = { .xtal_freq = TDA10046_XTAL_4M, .agc_config = TDA10046_AGC_DEFAULT, .if_freq = TDA10046_FREQ_3617, - .request_firmware = philips_tu1216_request_firmware, + .request_firmware = philips_tda1004x_request_firmware, }; /* ------------------------------------------------------------------ */ @@ -331,12 +335,12 @@ static struct tda1004x_config philips_tu1216_61_config = { .xtal_freq = TDA10046_XTAL_4M, .agc_config = TDA10046_AGC_DEFAULT, .if_freq = TDA10046_FREQ_3617, - .request_firmware = philips_tu1216_request_firmware, + .request_firmware = philips_tda1004x_request_firmware, }; /* ------------------------------------------------------------------ */ -static int philips_europa_tuner_init(struct dvb_frontend *fe) +static int philips_td1316_tuner_init(struct dvb_frontend *fe) { struct saa7134_dev *dev = fe->dvb->priv; static u8 msg[] = { 0x0b, 0xf5, 0x86, 0xab }; @@ -347,18 +351,8 @@ static int philips_europa_tuner_init(struct dvb_frontend *fe) fe->ops.i2c_gate_ctrl(fe, 1); if (i2c_transfer(&dev->i2c_adap, &init_msg, 1) != 1) return -EIO; - msleep(1); - - /* switch the board to dvb mode */ - init_msg.addr = 0x43; - init_msg.len = 0x02; - msg[0] = 0x00; - msg[1] = 0x40; if (fe->ops.i2c_gate_ctrl) - fe->ops.i2c_gate_ctrl(fe, 1); - if (i2c_transfer(&dev->i2c_adap, &init_msg, 1) != 1) - return -EIO; - + fe->ops.i2c_gate_ctrl(fe, 0); return 0; } @@ -367,6 +361,22 @@ static int philips_td1316_tuner_set_params(struct dvb_frontend *fe, struct dvb_f return philips_tda6651_pll_set(0x61, fe, params); } +static int philips_europa_tuner_init(struct dvb_frontend *fe) +{ + struct saa7134_dev *dev = fe->dvb->priv; + static u8 msg[] = { 0x00, 0x40}; + struct i2c_msg init_msg = {.addr = 0x43,.flags = 0,.buf = msg,.len = sizeof(msg) }; + + + if (philips_td1316_tuner_init(fe)) + return -EIO; + msleep(1); + if (i2c_transfer(&dev->i2c_adap, &init_msg, 1) != 1) + return -EIO; + + return 0; +} + static int philips_europa_tuner_sleep(struct dvb_frontend *fe) { struct saa7134_dev *dev = fe->dvb->priv; @@ -671,7 +681,7 @@ static struct tda1004x_config tda827x_lifeview_config = { .invert = 1, .invert_oclk = 0, .xtal_freq = TDA10046_XTAL_16M, - .agc_config = TDA10046_AGC_TDA827X, + .agc_config = TDA10046_AGC_TDA827X_GP11, .if_freq = TDA10046_FREQ_045, .request_firmware = NULL, }; @@ -812,32 +822,40 @@ static int philips_tda827xa_tuner_sleep(u8 addr, struct dvb_frontend *fe) if (fe->ops.i2c_gate_ctrl) fe->ops.i2c_gate_ctrl(fe, 1); i2c_transfer(&dev->i2c_adap, &tuner_msg, 1); + if (fe->ops.i2c_gate_ctrl) + fe->ops.i2c_gate_ctrl(fe, 0); return 0; } /* ------------------------------------------------------------------ */ -static int philips_tiger_tuner_set_params(struct dvb_frontend *fe, struct dvb_frontend_parameters *params) +static int tda8290_i2c_gate_ctrl(struct dvb_frontend* fe, int enable) { - int ret; struct saa7134_dev *dev = fe->dvb->priv; static u8 tda8290_close[] = { 0x21, 0xc0}; static u8 tda8290_open[] = { 0x21, 0x80}; struct i2c_msg tda8290_msg = {.addr = 0x4b,.flags = 0, .len = 2}; - - /* close tda8290 i2c bridge */ - tda8290_msg.buf = tda8290_close; - ret = i2c_transfer(&dev->i2c_adap, &tda8290_msg, 1); - if (ret != 1) + if (enable) { + tda8290_msg.buf = tda8290_close; + } else { + tda8290_msg.buf = tda8290_open; + } + if (i2c_transfer(&dev->i2c_adap, &tda8290_msg, 1) != 1) return -EIO; msleep(20); + return 0; +} + +/* ------------------------------------------------------------------ */ + +static int philips_tiger_tuner_set_params(struct dvb_frontend *fe, struct dvb_frontend_parameters *params) +{ + int ret; + ret = philips_tda827xa_pll_set(0x61, fe, params); if (ret != 0) return ret; - /* open tda8290 i2c bridge */ - tda8290_msg.buf = tda8290_open; - i2c_transfer(&dev->i2c_adap, &tda8290_msg, 1); - return ret; + return 0; } static int philips_tiger_tuner_init(struct dvb_frontend *fe) @@ -867,13 +885,80 @@ static struct tda1004x_config philips_tiger_config = { .invert = 1, .invert_oclk = 0, .xtal_freq = TDA10046_XTAL_16M, - .agc_config = TDA10046_AGC_TDA827X, + .agc_config = TDA10046_AGC_TDA827X_GP11, + .if_freq = TDA10046_FREQ_045, + .request_firmware = NULL, +}; +/* ------------------------------------------------------------------ */ + +static int cinergy_ht_tuner_init(struct dvb_frontend *fe) +{ + struct saa7134_dev *dev = fe->dvb->priv; + static u8 data[] = { 0x3c, 0x33, 0x62}; + struct i2c_msg msg = {.addr=0x08, .flags=0, .buf=data, .len = sizeof(data)}; + + if (i2c_transfer(&dev->i2c_adap, &msg, 1) != 1) + return -EIO; + return 0; +} + +static int cinergy_ht_tuner_sleep(struct dvb_frontend *fe) +{ + struct saa7134_dev *dev = fe->dvb->priv; + static u8 data[] = { 0x3c, 0x33, 0x60}; + struct i2c_msg msg = {.addr=0x08, .flags=0, .buf=data, .len = sizeof(data)}; + + i2c_transfer(&dev->i2c_adap, &msg, 1); + philips_tda827xa_tuner_sleep( 0x61, fe); + return 0; +} + +static struct tda1004x_config cinergy_ht_config = { + .demod_address = 0x08, + .invert = 1, + .invert_oclk = 0, + .xtal_freq = TDA10046_XTAL_16M, + .agc_config = TDA10046_AGC_TDA827X_GP01, .if_freq = TDA10046_FREQ_045, .request_firmware = NULL, }; /* ------------------------------------------------------------------ */ +static struct tda1004x_config pinnacle_pctv_310i_config = { + .demod_address = 0x08, + .invert = 1, + .invert_oclk = 0, + .xtal_freq = TDA10046_XTAL_16M, + .agc_config = TDA10046_AGC_TDA827X_GP11, + .if_freq = TDA10046_FREQ_045, + .request_firmware = philips_tda1004x_request_firmware, +}; + +/* ------------------------------------------------------------------ */ + +static struct tda1004x_config hauppauge_hvr_1110_config = { + .demod_address = 0x08, + .invert = 1, + .invert_oclk = 0, + .xtal_freq = TDA10046_XTAL_16M, + .agc_config = TDA10046_AGC_TDA827X_GP11, + .if_freq = TDA10046_FREQ_045, + .request_firmware = philips_tda1004x_request_firmware, +}; + +/* ------------------------------------------------------------------ */ + +static struct tda1004x_config asus_p7131_dual_config = { + .demod_address = 0x08, + .invert = 1, + .invert_oclk = 0, + .xtal_freq = TDA10046_XTAL_16M, + .agc_config = TDA10046_AGC_TDA827X_GP11, + .if_freq = TDA10046_FREQ_045, + .request_firmware = philips_tda1004x_request_firmware, +}; + static int asus_p7131_dual_tuner_init(struct dvb_frontend *fe) { struct saa7134_dev *dev = fe->dvb->priv; @@ -921,7 +1006,7 @@ static struct tda1004x_config lifeview_trio_config = { .invert = 1, .invert_oclk = 0, .xtal_freq = TDA10046_XTAL_16M, - .agc_config = TDA10046_AGC_TDA827X_GPL, + .agc_config = TDA10046_AGC_TDA827X_GP00, .if_freq = TDA10046_FREQ_045, .request_firmware = NULL, }; @@ -958,7 +1043,7 @@ static struct tda1004x_config ads_tech_duo_config = { .invert = 1, .invert_oclk = 0, .xtal_freq = TDA10046_XTAL_16M, - .agc_config = TDA10046_AGC_TDA827X_GPL, + .agc_config = TDA10046_AGC_TDA827X_GP00, .if_freq = TDA10046_FREQ_045, .request_firmware = NULL, }; @@ -983,7 +1068,7 @@ static struct tda1004x_config tevion_dvbt220rf_config = { .invert = 1, .invert_oclk = 0, .xtal_freq = TDA10046_XTAL_16M, - .agc_config = TDA10046_AGC_TDA827X, + .agc_config = TDA10046_AGC_TDA827X_GP11, .if_freq = TDA10046_FREQ_045, .request_firmware = NULL, }; @@ -1028,7 +1113,7 @@ static struct tda1004x_config md8800_dvbt_config = { .invert = 1, .invert_oclk = 0, .xtal_freq = TDA10046_XTAL_16M, - .agc_config = TDA10046_AGC_TDA827X, + .agc_config = TDA10046_AGC_TDA827X_GP11, .if_freq = TDA10046_FREQ_045, .request_firmware = NULL, }; @@ -1147,6 +1232,8 @@ static int dvb_init(struct saa7134_dev *dev) &philips_europa_config, &dev->i2c_adap); if (dev->dvb.frontend) { + dev->original_demod_sleep = dev->dvb.frontend->ops.sleep; + dev->dvb.frontend->ops.sleep = philips_europa_demod_sleep; dev->dvb.frontend->ops.tuner_ops.init = philips_europa_tuner_init; dev->dvb.frontend->ops.tuner_ops.sleep = philips_europa_tuner_sleep; dev->dvb.frontend->ops.tuner_ops.set_params = philips_td1316_tuner_set_params; @@ -1166,6 +1253,29 @@ static int dvb_init(struct saa7134_dev *dev) &philips_tiger_config, &dev->i2c_adap); if (dev->dvb.frontend) { + dev->dvb.frontend->ops.i2c_gate_ctrl = tda8290_i2c_gate_ctrl; + dev->dvb.frontend->ops.tuner_ops.init = philips_tiger_tuner_init; + dev->dvb.frontend->ops.tuner_ops.sleep = philips_tiger_tuner_sleep; + dev->dvb.frontend->ops.tuner_ops.set_params = philips_tiger_tuner_set_params; + } + break; + case SAA7134_BOARD_PINNACLE_PCTV_310i: + dev->dvb.frontend = dvb_attach(tda10046_attach, + &pinnacle_pctv_310i_config, + &dev->i2c_adap); + if (dev->dvb.frontend) { + dev->dvb.frontend->ops.i2c_gate_ctrl = tda8290_i2c_gate_ctrl; + dev->dvb.frontend->ops.tuner_ops.init = philips_tiger_tuner_init; + dev->dvb.frontend->ops.tuner_ops.sleep = philips_tiger_tuner_sleep; + dev->dvb.frontend->ops.tuner_ops.set_params = philips_tiger_tuner_set_params; + } + break; + case SAA7134_BOARD_HAUPPAUGE_HVR1110: + dev->dvb.frontend = dvb_attach(tda10046_attach, + &hauppauge_hvr_1110_config, + &dev->i2c_adap); + if (dev->dvb.frontend) { + dev->dvb.frontend->ops.i2c_gate_ctrl = tda8290_i2c_gate_ctrl; dev->dvb.frontend->ops.tuner_ops.init = philips_tiger_tuner_init; dev->dvb.frontend->ops.tuner_ops.sleep = philips_tiger_tuner_sleep; dev->dvb.frontend->ops.tuner_ops.set_params = philips_tiger_tuner_set_params; @@ -1173,9 +1283,10 @@ static int dvb_init(struct saa7134_dev *dev) break; case SAA7134_BOARD_ASUSTeK_P7131_DUAL: dev->dvb.frontend = dvb_attach(tda10046_attach, - &philips_tiger_config, + &asus_p7131_dual_config, &dev->i2c_adap); if (dev->dvb.frontend) { + dev->dvb.frontend->ops.i2c_gate_ctrl = tda8290_i2c_gate_ctrl; dev->dvb.frontend->ops.tuner_ops.init = asus_p7131_dual_tuner_init; dev->dvb.frontend->ops.tuner_ops.sleep = asus_p7131_dual_tuner_sleep; dev->dvb.frontend->ops.tuner_ops.set_params = philips_tiger_tuner_set_params; @@ -1192,12 +1303,27 @@ static int dvb_init(struct saa7134_dev *dev) } break; case SAA7134_BOARD_FLYDVB_TRIO: - dev->dvb.frontend = dvb_attach(tda10046_attach, - &lifeview_trio_config, - &dev->i2c_adap); - if (dev->dvb.frontend) { - dev->dvb.frontend->ops.tuner_ops.sleep = lifeview_trio_tuner_sleep; - dev->dvb.frontend->ops.tuner_ops.set_params = lifeview_trio_tuner_set_params; + if(! use_frontent) { //terrestrial + dev->dvb.frontend = dvb_attach(tda10046_attach, + &lifeview_trio_config, + &dev->i2c_adap); + if (dev->dvb.frontend) { + dev->dvb.frontend->ops.tuner_ops.sleep = lifeview_trio_tuner_sleep; + dev->dvb.frontend->ops.tuner_ops.set_params = + lifeview_trio_tuner_set_params; + } + } else { //satellite + dev->dvb.frontend = dvb_attach(tda10086_attach, &flydvbs, &dev->i2c_adap); + if (dev->dvb.frontend) { + if (dvb_attach(tda826x_attach, dev->dvb.frontend, 0x63, + &dev->i2c_adap, 0) == NULL) { + printk("%s: Lifeview Trio, No tda826x found!\n", __FUNCTION__); + } + if (dvb_attach(isl6421_attach, dev->dvb.frontend, &dev->i2c_adap, + 0x08, 0, 0) == NULL) { + printk("%s: Lifeview Trio, No ISL6421 found!\n", __FUNCTION__); + } + } } break; case SAA7134_BOARD_ADS_DUO_CARDBUS_PTV331: @@ -1279,7 +1405,27 @@ static int dvb_init(struct saa7134_dev *dev) dev->dvb.frontend->ops.tuner_ops.set_params = philips_fmd1216_tuner_set_params; } break; + case SAA7134_BOARD_VIDEOMATE_DVBT_200A: + dev->dvb.frontend = dvb_attach(tda10046_attach, + &philips_europa_config, + &dev->i2c_adap); + if (dev->dvb.frontend) { + dev->dvb.frontend->ops.tuner_ops.init = philips_td1316_tuner_init; + dev->dvb.frontend->ops.tuner_ops.set_params = philips_td1316_tuner_set_params; + } + break; + case SAA7134_BOARD_CINERGY_HT_PCMCIA: + dev->dvb.frontend = dvb_attach(tda10046_attach, + &cinergy_ht_config, + &dev->i2c_adap); + if (dev->dvb.frontend) { + dev->dvb.frontend->ops.i2c_gate_ctrl = tda8290_i2c_gate_ctrl; + dev->dvb.frontend->ops.tuner_ops.init = cinergy_ht_tuner_init; + dev->dvb.frontend->ops.tuner_ops.sleep = cinergy_ht_tuner_sleep; + dev->dvb.frontend->ops.tuner_ops.set_params = philips_tiger_tuner_set_params; + } + break; default: printk("%s: Huh? unknown DVB card?\n",dev->name); break; diff --git a/drivers/media/video/saa7134/saa7134-empress.c b/drivers/media/video/saa7134/saa7134-empress.c index 65d044086ce..daaae870a2c 100644 --- a/drivers/media/video/saa7134/saa7134-empress.c +++ b/drivers/media/video/saa7134/saa7134-empress.c @@ -343,9 +343,10 @@ static struct video_device saa7134_empress_template = .minor = -1, }; -static void empress_signal_update(void* data) +static void empress_signal_update(struct work_struct *work) { - struct saa7134_dev* dev = (struct saa7134_dev*) data; + struct saa7134_dev* dev = + container_of(work, struct saa7134_dev, empress_workqueue); if (dev->nosignal) { dprintk("no video signal\n"); @@ -378,7 +379,7 @@ static int empress_init(struct saa7134_dev *dev) "%s empress (%s)", dev->name, saa7134_boards[dev->board].name); - INIT_WORK(&dev->empress_workqueue, empress_signal_update, (void*) dev); + INIT_WORK(&dev->empress_workqueue, empress_signal_update); err = video_register_device(dev->empress_dev,VFL_TYPE_GRABBER, empress_nr[dev->nr]); @@ -399,7 +400,7 @@ static int empress_init(struct saa7134_dev *dev) sizeof(struct saa7134_buf), dev); - empress_signal_update(dev); + empress_signal_update(&dev->empress_workqueue); return 0; } diff --git a/drivers/media/video/saa7134/saa7134-i2c.c b/drivers/media/video/saa7134/saa7134-i2c.c index 6162550c413..6f9fe86fed9 100644 --- a/drivers/media/video/saa7134/saa7134-i2c.c +++ b/drivers/media/video/saa7134/saa7134-i2c.c @@ -341,6 +341,7 @@ static int attach_inform(struct i2c_client *client) switch (client->addr) { case 0x7a: case 0x47: + case 0x71: { struct IR_i2c *ir = i2c_get_clientdata(client); d1printk("%s i2c IR detected (%s).\n", diff --git a/drivers/media/video/saa7134/saa7134-input.c b/drivers/media/video/saa7134/saa7134-input.c index ff5991136f4..60b38defd9b 100644 --- a/drivers/media/video/saa7134/saa7134-input.c +++ b/drivers/media/video/saa7134/saa7134-input.c @@ -112,6 +112,27 @@ static int get_key_purpletv(struct IR_i2c *ir, u32 *ir_key, u32 *ir_raw) return 1; } +static int get_key_hvr1110(struct IR_i2c *ir, u32 *ir_key, u32 *ir_raw) +{ + unsigned char buf[5], cod4, code3, code4; + + /* poll IR chip */ + if (5 != i2c_master_recv(&ir->c,buf,5)) + return -EIO; + + cod4 = buf[4]; + code4 = (cod4 >> 2); + code3 = buf[3]; + if (code3 == 0) + /* no key pressed */ + return 0; + + /* return key */ + *ir_key = code4; + *ir_raw = code4; + return 1; +} + void saa7134_input_irq(struct saa7134_dev *dev) { struct saa7134_ir *ir = dev->remote; @@ -131,6 +152,23 @@ static void saa7134_input_timer(unsigned long data) mod_timer(&ir->timer, timeout); } +static void saa7134_ir_start(struct saa7134_dev *dev, struct saa7134_ir *ir) +{ + if (ir->polling) { + init_timer(&ir->timer); + ir->timer.function = saa7134_input_timer; + ir->timer.data = (unsigned long)dev; + ir->timer.expires = jiffies + HZ; + add_timer(&ir->timer); + } +} + +static void saa7134_ir_stop(struct saa7134_dev *dev) +{ + if (dev->remote->polling) + del_timer_sync(&dev->remote->timer); +} + int saa7134_input_init1(struct saa7134_dev *dev) { struct saa7134_ir *ir; @@ -141,6 +179,7 @@ int saa7134_input_init1(struct saa7134_dev *dev) u32 mask_keyup = 0; int polling = 0; int ir_type = IR_TYPE_OTHER; + int err; if (dev->has_remote != SAA7134_REMOTE_GPIO) return -ENODEV; @@ -184,8 +223,8 @@ int saa7134_input_init1(struct saa7134_dev *dev) case SAA7134_BOARD_AVERMEDIA_307: case SAA7134_BOARD_AVERMEDIA_STUDIO_305: case SAA7134_BOARD_AVERMEDIA_STUDIO_307: + case SAA7134_BOARD_AVERMEDIA_STUDIO_507: case SAA7134_BOARD_AVERMEDIA_GO_007_FM: - case SAA7134_BOARD_AVERMEDIA_A16AR: ir_codes = ir_codes_avermedia; mask_keycode = 0x0007C8; mask_keydown = 0x000010; @@ -194,6 +233,16 @@ int saa7134_input_init1(struct saa7134_dev *dev) saa_setb(SAA7134_GPIO_GPMODE0, 0x4); saa_setb(SAA7134_GPIO_GPSTATUS0, 0x4); break; + case SAA7134_BOARD_AVERMEDIA_777: + case SAA7134_BOARD_AVERMEDIA_A16AR: + ir_codes = ir_codes_avermedia; + mask_keycode = 0x02F200; + mask_keydown = 0x000400; + polling = 50; // ms + /* Without this we won't receive key up events */ + saa_setb(SAA7134_GPIO_GPMODE1, 0x1); + saa_setb(SAA7134_GPIO_GPSTATUS1, 0x1); + break; case SAA7134_BOARD_KWORLD_TERMINATOR: ir_codes = ir_codes_pixelview; mask_keycode = 0x00001f; @@ -257,9 +306,8 @@ int saa7134_input_init1(struct saa7134_dev *dev) ir = kzalloc(sizeof(*ir), GFP_KERNEL); input_dev = input_allocate_device(); if (!ir || !input_dev) { - kfree(ir); - input_free_device(input_dev); - return -ENOMEM; + err = -ENOMEM; + goto err_out_free; } ir->dev = input_dev; @@ -290,18 +338,22 @@ int saa7134_input_init1(struct saa7134_dev *dev) } input_dev->cdev.dev = &dev->pci->dev; - /* all done */ dev->remote = ir; - if (ir->polling) { - init_timer(&ir->timer); - ir->timer.function = saa7134_input_timer; - ir->timer.data = (unsigned long)dev; - ir->timer.expires = jiffies + HZ; - add_timer(&ir->timer); - } + saa7134_ir_start(dev, ir); + + err = input_register_device(ir->dev); + if (err) + goto err_out_stop; - input_register_device(ir->dev); return 0; + + err_out_stop: + saa7134_ir_stop(dev); + dev->remote = NULL; + err_out_free: + input_free_device(input_dev); + kfree(ir); + return err; } void saa7134_input_fini(struct saa7134_dev *dev) @@ -309,8 +361,7 @@ void saa7134_input_fini(struct saa7134_dev *dev) if (NULL == dev->remote) return; - if (dev->remote->polling) - del_timer_sync(&dev->remote->timer); + saa7134_ir_stop(dev); input_unregister_device(dev->remote->dev); kfree(dev->remote); dev->remote = NULL; @@ -326,6 +377,7 @@ void saa7134_set_i2c_ir(struct saa7134_dev *dev, struct IR_i2c *ir) switch (dev->board) { case SAA7134_BOARD_PINNACLE_PCTV_110i: + case SAA7134_BOARD_PINNACLE_PCTV_310i: snprintf(ir->c.name, sizeof(ir->c.name), "Pinnacle PCTV"); if (pinnacle_remote == 0) { ir->get_key = get_key_pinnacle_color; @@ -340,6 +392,11 @@ void saa7134_set_i2c_ir(struct saa7134_dev *dev, struct IR_i2c *ir) ir->get_key = get_key_purpletv; ir->ir_codes = ir_codes_purpletv; break; + case SAA7134_BOARD_HAUPPAUGE_HVR1110: + snprintf(ir->c.name, sizeof(ir->c.name), "HVR 1110"); + ir->get_key = get_key_hvr1110; + ir->ir_codes = ir_codes_hauppauge_new; + break; default: dprintk("Shouldn't get here: Unknown board %x for I2C IR?\n",dev->board); break; diff --git a/drivers/media/video/saa7134/saa7134.h b/drivers/media/video/saa7134/saa7134.h index 7cf96b43025..e88ad7b40c4 100644 --- a/drivers/media/video/saa7134/saa7134.h +++ b/drivers/media/video/saa7134/saa7134.h @@ -227,6 +227,11 @@ struct saa7134_format { #define SAA7134_BOARD_PROTEUS_2309 98 #define SAA7134_BOARD_AVERMEDIA_A16AR 99 #define SAA7134_BOARD_ASUS_EUROPA2_HYBRID 100 +#define SAA7134_BOARD_PINNACLE_PCTV_310i 101 +#define SAA7134_BOARD_AVERMEDIA_STUDIO_507 102 +#define SAA7134_BOARD_VIDEOMATE_DVBT_200A 103 +#define SAA7134_BOARD_HAUPPAUGE_HVR1110 104 +#define SAA7134_BOARD_CINERGY_HT_PCMCIA 105 #define SAA7134_MAXBOARDS 8 #define SAA7134_INPUT_MAX 8 @@ -446,6 +451,9 @@ struct saa7134_dev { struct v4l2_prio_state prio; #endif + /* insmod option/autodetected */ + int autodetected; + /* various device info */ unsigned int resources; struct video_device *video_dev; diff --git a/drivers/media/video/sn9c102/sn9c102_core.c b/drivers/media/video/sn9c102/sn9c102_core.c index a4702d3c2ac..18458d46c0f 100644 --- a/drivers/media/video/sn9c102/sn9c102_core.c +++ b/drivers/media/video/sn9c102/sn9c102_core.c @@ -775,7 +775,7 @@ static int sn9c102_start_transfer(struct sn9c102_device* cam) return 0; free_urbs: - for (i = 0; (i < SN9C102_URBS) && cam->urb[i]; i++) + for (i = 0; i < SN9C102_URBS; i++) usb_free_urb(cam->urb[i]); free_buffers: @@ -1462,8 +1462,6 @@ static void sn9c102_release_resources(struct sn9c102_device* cam) video_set_drvdata(cam->v4ldev, NULL); video_unregister_device(cam->v4ldev); - usb_put_dev(cam->usbdev); - mutex_unlock(&sn9c102_sysfs_lock); kfree(cam->control_buffer); @@ -1555,6 +1553,7 @@ static int sn9c102_release(struct inode* inode, struct file* filp) if (cam->state & DEV_DISCONNECTED) { sn9c102_release_resources(cam); + usb_put_dev(cam->usbdev); mutex_unlock(&cam->dev_mutex); kfree(cam); return 0; diff --git a/drivers/media/video/stv680.c b/drivers/media/video/stv680.c index 6d1ef1e2e8e..a1ec3aca3f9 100644 --- a/drivers/media/video/stv680.c +++ b/drivers/media/video/stv680.c @@ -687,7 +687,7 @@ static int stv680_start_stream (struct usb_stv *stv680) stv680->sbuf[i].data = kmalloc (stv680->rawbufsize, GFP_KERNEL); if (stv680->sbuf[i].data == NULL) { PDEBUG (0, "STV(e): Could not kmalloc raw data buffer %i", i); - return -1; + goto nomem_err; } } @@ -698,7 +698,7 @@ static int stv680_start_stream (struct usb_stv *stv680) stv680->scratch[i].data = kmalloc (stv680->rawbufsize, GFP_KERNEL); if (stv680->scratch[i].data == NULL) { PDEBUG (0, "STV(e): Could not kmalloc raw scratch buffer %i", i); - return -1; + goto nomem_err; } stv680->scratch[i].state = BUFFER_UNUSED; } @@ -706,7 +706,7 @@ static int stv680_start_stream (struct usb_stv *stv680) for (i = 0; i < STV680_NUMSBUF; i++) { urb = usb_alloc_urb (0, GFP_KERNEL); if (!urb) - return -ENOMEM; + goto nomem_err; /* sbuf is urb->transfer_buffer, later gets memcpyed to scratch */ usb_fill_bulk_urb (urb, stv680->udev, @@ -721,6 +721,21 @@ static int stv680_start_stream (struct usb_stv *stv680) stv680->framecount = 0; return 0; + + nomem_err: + for (i = 0; i < STV680_NUMSCRATCH; i++) { + kfree(stv680->scratch[i].data); + stv680->scratch[i].data = NULL; + } + for (i = 0; i < STV680_NUMSBUF; i++) { + usb_kill_urb(stv680->urb[i]); + usb_free_urb(stv680->urb[i]); + stv680->urb[i] = NULL; + kfree(stv680->sbuf[i].data); + stv680->sbuf[i].data = NULL; + } + return -ENOMEM; + } static int stv680_stop_stream (struct usb_stv *stv680) diff --git a/drivers/media/video/tda9887.c b/drivers/media/video/tda9887.c index 87ffb0e84a7..fde576f1101 100644 --- a/drivers/media/video/tda9887.c +++ b/drivers/media/video/tda9887.c @@ -482,6 +482,12 @@ static int tda9887_set_config(struct tuner *t, char *buf) buf[1] &= ~cQSS; if (t->tda9887_config & TDA9887_GATING_18) buf[3] &= ~cGating_36; + + if (t->tda9887_config & TDA9887_GAIN_NORMAL) { + radio_stereo.e &= ~cTunerGainLow; + radio_mono.e &= ~cTunerGainLow; + } + return 0; } diff --git a/drivers/media/video/tuner-core.c b/drivers/media/video/tuner-core.c index 40590bae5ff..705daaa2a4f 100644 --- a/drivers/media/video/tuner-core.c +++ b/drivers/media/video/tuner-core.c @@ -443,6 +443,10 @@ static int tuner_attach(struct i2c_adapter *adap, int addr, int kind) printk("%02x ",buffer[i]); printk("\n"); } + /* HACK: This test were added to avoid tuner to probe tda9840 and tea6415c on the MXB card */ + if (adap->id == I2C_HW_SAA7146 && addr < 0x4a) + return -ENODEV; + /* autodetection code based on the i2c addr */ if (!no_autodetect) { switch (addr) { diff --git a/drivers/media/video/tuner-simple.c b/drivers/media/video/tuner-simple.c index 63db4e97ae6..1b9b0742f75 100644 --- a/drivers/media/video/tuner-simple.c +++ b/drivers/media/video/tuner-simple.c @@ -108,6 +108,7 @@ static int tuner_stereo(struct i2c_client *c) case TUNER_PHILIPS_FM1216ME_MK3: case TUNER_PHILIPS_FM1236_MK3: case TUNER_PHILIPS_FM1256_IH3: + case TUNER_LG_NTSC_TAPE: stereo = ((status & TUNER_SIGNAL) == TUNER_STEREO_MK3); break; default: @@ -421,6 +422,7 @@ static void default_set_radio_freq(struct i2c_client *c, unsigned int freq) case TUNER_PHILIPS_FM1216ME_MK3: case TUNER_PHILIPS_FM1236_MK3: case TUNER_PHILIPS_FMD1216ME_MK3: + case TUNER_LG_NTSC_TAPE: buffer[3] = 0x19; break; case TUNER_TNF_5335MF: @@ -465,6 +467,8 @@ static void default_set_radio_freq(struct i2c_client *c, unsigned int freq) config |= TDA9887_INTERCARRIER; /* if (params->port1_set_for_fm_mono) config &= ~TDA9887_PORT1_ACTIVE;*/ + if (params->fm_gain_normal) + config |= TDA9887_GAIN_NORMAL; i2c_clients_command(c->adapter, TDA9887_SET_CONFIG, &config); } if (4 != (rc = i2c_master_send(c,buffer,4))) diff --git a/drivers/media/video/tuner-types.c b/drivers/media/video/tuner-types.c index 781682373b6..74c3e6f96f1 100644 --- a/drivers/media/video/tuner-types.c +++ b/drivers/media/video/tuner-types.c @@ -651,6 +651,7 @@ static struct tuner_params tuner_microtune_4049_fm5_params[] = { .has_tda9887 = 1, .port1_invert_for_secam_lc = 1, .default_pll_gating_18 = 1, + .fm_gain_normal=1, }, }; @@ -672,16 +673,6 @@ static struct tuner_params tuner_panasonic_vp27_params[] = { }, }; -/* ------------ TUNER_LG_NTSC_TAPE - LGINNOTEK NTSC ------------ */ - -static struct tuner_params tuner_lg_ntsc_tape_params[] = { - { - .type = TUNER_PARAM_TYPE_NTSC, - .ranges = tuner_fm1236_mk3_ntsc_ranges, - .count = ARRAY_SIZE(tuner_fm1236_mk3_ntsc_ranges), - }, -}; - /* ------------ TUNER_TNF_8831BGFF - Philips PAL ------------ */ static struct tuner_range tuner_tnf_8831bgff_pal_ranges[] = { @@ -1331,8 +1322,8 @@ struct tunertype tuners[] = { }, [TUNER_LG_NTSC_TAPE] = { /* LGINNOTEK NTSC */ .name = "LG NTSC (TAPE series)", - .params = tuner_lg_ntsc_tape_params, - .count = ARRAY_SIZE(tuner_lg_ntsc_tape_params), + .params = tuner_fm1236_mk3_params, + .count = ARRAY_SIZE(tuner_fm1236_mk3_params), }, [TUNER_TNF_8831BGFF] = { /* Philips PAL */ .name = "Tenna TNF 8831 BGFF)", diff --git a/drivers/media/video/tvaudio.c b/drivers/media/video/tvaudio.c index fcaef4bf828..d506dfaa45a 100644 --- a/drivers/media/video/tvaudio.c +++ b/drivers/media/video/tvaudio.c @@ -29,6 +29,7 @@ #include <linux/init.h> #include <linux/smp_lock.h> #include <linux/kthread.h> +#include <linux/freezer.h> #include <media/tvaudio.h> #include <media/v4l2-common.h> diff --git a/drivers/media/video/tveeprom.c b/drivers/media/video/tveeprom.c index e6baaee038b..2624e3f7dd2 100644 --- a/drivers/media/video/tveeprom.c +++ b/drivers/media/video/tveeprom.c @@ -430,7 +430,7 @@ void tveeprom_hauppauge_analog(struct i2c_client *c, struct tveeprom *tvee, tvee->has_radio = eeprom_data[i+len-1]; /* old style tag, don't know how to detect IR presence, mark as unknown. */ - tvee->has_ir = 2; + tvee->has_ir = -1; tvee->model = eeprom_data[i+8] + (eeprom_data[i+9] << 8); @@ -468,7 +468,7 @@ void tveeprom_hauppauge_analog(struct i2c_client *c, struct tveeprom *tvee, (eeprom_data[i+6] << 8) + (eeprom_data[i+7] << 16); - if ( (eeprom_data[i + 8] && 0xf0) && + if ( (eeprom_data[i + 8] & 0xf0) && (tvee->serial_number < 0xffffff) ) { tvee->MAC_address[0] = 0x00; tvee->MAC_address[1] = 0x0D; @@ -653,13 +653,14 @@ void tveeprom_hauppauge_analog(struct i2c_client *c, struct tveeprom *tvee, STRM(decoderIC, tvee->decoder_processor), tvee->decoder_processor); } - if (tvee->has_ir == 2) + if (tvee->has_ir == -1) tveeprom_info("has %sradio\n", tvee->has_radio ? "" : "no "); else - tveeprom_info("has %sradio, has %sIR remote\n", + tveeprom_info("has %sradio, has %sIR receiver, has %sIR transmitter\n", tvee->has_radio ? "" : "no ", - tvee->has_ir ? "" : "no "); + (tvee->has_ir & 1) ? "" : "no ", + (tvee->has_ir & 2) ? "" : "no "); } EXPORT_SYMBOL(tveeprom_hauppauge_analog); diff --git a/drivers/media/video/usbvideo/quickcam_messenger.c b/drivers/media/video/usbvideo/quickcam_messenger.c index 9a26b9484aa..ec0ff2247f0 100644 --- a/drivers/media/video/usbvideo/quickcam_messenger.c +++ b/drivers/media/video/usbvideo/quickcam_messenger.c @@ -86,6 +86,7 @@ MODULE_DEVICE_TABLE(usb, qcm_table); static void qcm_register_input(struct qcm *cam, struct usb_device *dev) { struct input_dev *input_dev; + int error; usb_make_path(dev, cam->input_physname, sizeof(cam->input_physname)); strncat(cam->input_physname, "/input0", sizeof(cam->input_physname)); @@ -106,7 +107,13 @@ static void qcm_register_input(struct qcm *cam, struct usb_device *dev) input_dev->private = cam; - input_register_device(cam->input); + error = input_register_device(cam->input); + if (error) { + warn("Failed to register camera's input device, err: %d\n", + error); + input_free_device(cam->input); + cam->input = NULL; + } } static void qcm_unregister_input(struct qcm *cam) @@ -190,8 +197,7 @@ static int qcm_alloc_int_urb(struct qcm *cam) static void qcm_free_int(struct qcm *cam) { - if (cam->button_urb) - usb_free_urb(cam->button_urb); + usb_free_urb(cam->button_urb); } #endif /* CONFIG_INPUT */ diff --git a/drivers/media/video/usbvision/Kconfig b/drivers/media/video/usbvision/Kconfig new file mode 100644 index 00000000000..fc24ef05b3f --- /dev/null +++ b/drivers/media/video/usbvision/Kconfig @@ -0,0 +1,12 @@ +config VIDEO_USBVISION + tristate "USB video devices based on Nogatech NT1003/1004/1005" + depends on I2C && VIDEO_V4L2 + select VIDEO_TUNER + select VIDEO_SAA711X if VIDEO_HELPER_CHIPS_AUTO + ---help--- + There are more than 50 different USB video devices based on + NT1003/1004/1005 USB Bridges. This driver enables using those + devices. + + To compile this driver as a module, choose M here: the + module will be called usbvision. diff --git a/drivers/media/video/usbvision/Makefile b/drivers/media/video/usbvision/Makefile new file mode 100644 index 00000000000..9ac92a80c64 --- /dev/null +++ b/drivers/media/video/usbvision/Makefile @@ -0,0 +1,5 @@ +usbvision-objs := usbvision-core.o usbvision-video.o usbvision-i2c.o usbvision-cards.o + +obj-$(CONFIG_VIDEO_USBVISION) += usbvision.o + +EXTRA_CFLAGS += -Idrivers/media/video diff --git a/drivers/media/video/usbvision/usbvision-cards.c b/drivers/media/video/usbvision/usbvision-cards.c new file mode 100644 index 00000000000..134eb9865df --- /dev/null +++ b/drivers/media/video/usbvision/usbvision-cards.c @@ -0,0 +1,157 @@ +/* + * USBVISION.H + * usbvision header file + * + * Copyright (c) 1999-2005 Joerg Heckenbach <joerg@heckenbach-aw.de> + * + * This module is part of usbvision driver project. + * Updates to driver completed by Dwaine P. Garden + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + + +#include <linux/list.h> +#include <linux/i2c.h> +#include <media/v4l2-dev.h> +#include <media/tuner.h> +#include "usbvision.h" + +/* Supported Devices: A table for usbvision.c*/ +struct usbvision_device_data_st usbvision_device_data[] = { + {0xFFF0, 0xFFF0, -1, CODEC_SAA7111, 3, V4L2_STD_NTSC, 1, 1, 1, 1, TUNER_PHILIPS_NTSC_M, -1, -1, -1, -1, -1, "Custom Dummy USBVision Device"}, + {0x0A6F, 0x0400, -1, CODEC_SAA7113, 4, V4L2_STD_NTSC, 1, 0, 1, 0, 0, -1, -1, -1, -1, -1, "Xanboo"}, + {0x050D, 0x0208, -1, CODEC_SAA7113, 2, V4L2_STD_PAL, 1, 0, 1, 0, 0, -1, -1, 0, 3, 7, "Belkin USBView II"}, + {0x0571, 0x0002, 0, CODEC_SAA7111, 2, V4L2_STD_PAL, 0, 0, 1, 0, 0, -1, -1, -1, -1, 7, "echoFX InterView Lite"}, + {0x0573, 0x0003, -1, CODEC_SAA7111, 2, V4L2_STD_NTSC, 1, 0, 1, 0, 0, -1, -1, -1, -1, -1, "USBGear USBG-V1 resp. HAMA USB"}, + {0x0573, 0x0400, -1, CODEC_SAA7113, 4, V4L2_STD_NTSC, 0, 0, 1, 0, 0, -1, -1, 0, 3, 7, "D-Link V100"}, + {0x0573, 0x2000, -1, CODEC_SAA7111, 2, V4L2_STD_NTSC, 1, 0, 1, 0, 0, -1, -1, -1, -1, -1, "X10 USB Camera"}, + {0x0573, 0x2d00, -1, CODEC_SAA7111, 2, V4L2_STD_PAL, 1, 0, 1, 0, 0, -1, -1, -1, 3, 7, "Osprey 50"}, + {0x0573, 0x2d01, -1, CODEC_SAA7113, 2, V4L2_STD_NTSC, 0, 0, 1, 0, 0, -1, -1, 0, 3, 7, "Hauppauge USB-Live Model 600"}, + {0x0573, 0x2101, -1, CODEC_SAA7113, 2, V4L2_STD_PAL, 2, 0, 1, 0, 0, -1, -1, 0, 3, 7, "Zoran Co. PMD (Nogatech) AV-grabber Manhattan"}, + {0x0573, 0x4100, -1, CODEC_SAA7111, 3, V4L2_STD_NTSC, 1, 1, 1, 1, TUNER_PHILIPS_NTSC_M, -1, -1, -1, 20, -1, "Nogatech USB-TV (NTSC) FM"}, + {0x0573, 0x4110, -1, CODEC_SAA7111, 3, V4L2_STD_NTSC, 1, 1, 1, 1, TUNER_PHILIPS_NTSC_M, -1, -1, -1, 20, -1, "PNY USB-TV (NTSC) FM"}, + {0x0573, 0x4450, 0, CODEC_SAA7113, 3, V4L2_STD_PAL, 1, 1, 1, 1, TUNER_PHILIPS_PAL, -1, -1, 0, 3, 7, "PixelView PlayTv-USB PRO (PAL) FM"}, + {0x0573, 0x4550, 0, CODEC_SAA7113, 3, V4L2_STD_PAL, 1, 1, 1, 1, TUNER_PHILIPS_PAL, -1, -1, 0, 3, 7, "ZTV ZT-721 2.4GHz USB A/V Receiver"}, + {0x0573, 0x4d00, -1, CODEC_SAA7111, 3, V4L2_STD_NTSC, 1, 0, 1, 1, TUNER_PHILIPS_NTSC_M, -1, -1, -1, 20, -1, "Hauppauge WinTv-USB USA"}, + {0x0573, 0x4d01, -1, CODEC_SAA7111, 3, V4L2_STD_NTSC, 1, 0, 1, 1, TUNER_PHILIPS_NTSC_M, -1, -1, -1, -1, -1, "Hauppauge WinTv-USB"}, + {0x0573, 0x4d02, -1, CODEC_SAA7111, 3, V4L2_STD_NTSC, 1, 0, 1, 1, TUNER_PHILIPS_NTSC_M, -1, -1, -1, -1, -1, "Hauppauge WinTv-USB (NTSC)"}, + {0x0573, 0x4d03, -1, CODEC_SAA7111, 3, V4L2_STD_SECAM, 1, 0, 1, 1, TUNER_PHILIPS_SECAM, -1, -1, -1, -1, -1, "Hauppauge WinTv-USB (SECAM) "}, + {0x0573, 0x4d10, -1, CODEC_SAA7111, 3, V4L2_STD_NTSC, 1, 1, 1, 1, TUNER_PHILIPS_NTSC_M, -1, -1, -1, -1, -1, "Hauppauge WinTv-USB (NTSC) FM"}, + {0x0573, 0x4d11, -1, CODEC_SAA7111, 3, V4L2_STD_PAL, 1, 1, 1, 1, TUNER_PHILIPS_PAL, -1, -1, -1, -1, -1, "Hauppauge WinTv-USB (PAL) FM"}, + {0x0573, 0x4d12, -1, CODEC_SAA7111, 3, V4L2_STD_PAL, 1, 1, 1, 1, TUNER_PHILIPS_PAL, -1, -1, -1, -1, -1, "Hauppauge WinTv-USB (PAL) FM"}, + {0x0573, 0x4d2a, 0, CODEC_SAA7113, 3, V4L2_STD_NTSC, 1, 1, 1, 1, TUNER_MICROTUNE_4049FM5, -1, -1, 0, 3, 7, "Hauppauge WinTv USB (NTSC) FM Model 602 40201 Rev B285"}, + {0x0573, 0x4d2b, 0, CODEC_SAA7113, 3, V4L2_STD_NTSC, 1, 1, 1, 1, TUNER_MICROTUNE_4049FM5, -1, -1, 0, 3, 7, "Hauppauge WinTv USB (NTSC) FM Model 602 40201 Rev B282"}, + {0x0573, 0x4d2c, 0, CODEC_SAA7113, 3, V4L2_STD_PAL, 1, 0, 1, 1, TUNER_PHILIPS_FM1216ME_MK3, -1, -1, 0, 3, 7, "Hauppauge WinTv USB (PAL/SECAM) 40209 Rev E1A5"}, + {0x0573, 0x4d20, 0, CODEC_SAA7113, 3, V4L2_STD_PAL, 1, 1, 1, 1, TUNER_PHILIPS_PAL, -1, -1, 0, 3, 7, "Hauppauge WinTv-USB II (PAL) FM Model 40201 Rev B226"}, + {0x0573, 0x4d21, 0, CODEC_SAA7113, 3, V4L2_STD_PAL, 1, 0, 1, 1, TUNER_PHILIPS_PAL, -1, -1, 0, 3, 7, "Hauppauge WinTv-USB II (PAL)"}, + {0x0573, 0x4d22, 0, CODEC_SAA7113, 3, V4L2_STD_PAL, 1, 0, 1, 1, TUNER_PHILIPS_PAL, -1, -1, 0, 3, 7, "Hauppauge WinTv-USB II (PAL) MODEL 566"}, + {0x0573, 0x4d23, -1, CODEC_SAA7113, 3, V4L2_STD_SECAM, 1, 0, 1, 1, TUNER_PHILIPS_SECAM, -1, -1, 0, 3, 7, "Hauppauge WinTv-USB (SECAM) 4D23"}, + {0x0573, 0x4d25, -1, CODEC_SAA7113, 3, V4L2_STD_SECAM, 1, 0, 1, 1, TUNER_PHILIPS_SECAM, -1, -1, 0, 3, 7, "Hauppauge WinTv-USB (SECAM) Model 40209 Rev B234"}, + {0x0573, 0x4d26, -1, CODEC_SAA7113, 3, V4L2_STD_SECAM, 1, 0, 1, 1, TUNER_PHILIPS_SECAM, -1, -1, 0, 3, 7, "Hauppauge WinTv-USB (SECAM) Model 40209 Rev B243"}, + {0x0573, 0x4d27, -1, CODEC_SAA7113, 3, V4L2_STD_PAL, 1, 0, 1, 1, TUNER_ALPS_TSBE1_PAL, -1, -1, 0, 3, 7, "Hauppauge WinTv-USB Model 40204 Rev B281"}, + {0x0573, 0x4d28, -1, CODEC_SAA7113, 3, V4L2_STD_PAL, 1, 0, 1, 1, TUNER_ALPS_TSBE1_PAL, -1, -1, 0, 3, 7, "Hauppauge WinTv-USB Model 40204 Rev B283"}, + {0x0573, 0x4d29, -1, CODEC_SAA7113, 3, V4L2_STD_PAL, 1, 0, 1, 1, TUNER_PHILIPS_PAL, -1, -1, 0, 3, 7, "Hauppauge WinTv-USB Model 40205 Rev B298"}, + {0x0573, 0x4d30, -1, CODEC_SAA7113, 3, V4L2_STD_NTSC, 1, 1, 1, 1, TUNER_PHILIPS_NTSC_M, -1, -1, 0, 3, 7, "Hauppauge WinTv-USB FM Model 40211 Rev B123"}, + {0x0573, 0x4d31, 0, CODEC_SAA7113, 3, V4L2_STD_PAL, 1, 1, 1, 1, TUNER_PHILIPS_PAL, -1, -1, 0, 3, 7, "Hauppauge WinTv-USB III (PAL) FM Model 568"}, + {0x0573, 0x4d32, 0, CODEC_SAA7113, 3, V4L2_STD_PAL, 1, 1, 1, 1, TUNER_PHILIPS_PAL, -1, -1, 0, 3, 7, "Hauppauge WinTv-USB III (PAL) FM Model 573"}, + {0x0573, 0x4d35, 0, CODEC_SAA7113, 3, V4L2_STD_PAL, 1, 1, 1, 1, TUNER_MICROTUNE_4049FM5, -1, -1, 0, 3, 7, "Hauppauge WinTv-USB III (PAL) FM Model 40219 Rev B252"}, + {0x0573, 0x4d37, 0, CODEC_SAA7113, 3, V4L2_STD_PAL, 1, 1, 1, 1, TUNER_PHILIPS_FM1216ME_MK3, -1, -1, 0, 3, 7, "Hauppauge WinTV USB device Model 40219 Rev E189"}, + {0x0768, 0x0006, -1, CODEC_SAA7113, 3, V4L2_STD_NTSC, 1, 1, 1, 1, TUNER_PHILIPS_NTSC_M, -1, -1, 5, 5, -1, "Camtel Technology USB TV Genie Pro FM Model TVB330"}, + {0x07d0, 0x0001, -1, CODEC_SAA7113, 2, V4L2_STD_PAL, 0, 0, 1, 0, 0, -1, -1, 0, 3, 7, "Digital Video Creator I"}, + {0x07d0, 0x0002, -1, CODEC_SAA7111, 2, V4L2_STD_NTSC, 0, 0, 1, 0, 0, -1, -1, 82, 20, 7, "Global Village GV-007 (NTSC)"}, + {0x07d0, 0x0003, 0, CODEC_SAA7113, 2, V4L2_STD_NTSC, 0, 0, 1, 0, 0, -1, -1, 0, 3, 7, "Dazzle Fusion Model DVC-50 Rev 1 (NTSC)"}, + {0x07d0, 0x0004, 0, CODEC_SAA7113, 2, V4L2_STD_PAL, 0, 0, 1, 0, 0, -1, -1, 0, 3, 7, "Dazzle Fusion Model DVC-80 Rev 1 (PAL)"}, + {0x07d0, 0x0005, 0, CODEC_SAA7113, 2, V4L2_STD_SECAM, 0, 0, 1, 0, 0, -1, -1, 0, 3, 7, "Dazzle Fusion Model DVC-90 Rev 1 (SECAM)"}, + {0x2304, 0x010d, -1, CODEC_SAA7111, 3, V4L2_STD_PAL, 1, 0, 0, 1, TUNER_TEMIC_4066FY5_PAL_I, -1, -1, -1, -1, -1, "Pinnacle Studio PCTV USB (PAL)"}, + {0x2304, 0x0109, -1, CODEC_SAA7111, 3, V4L2_STD_SECAM, 1, 0, 1, 1, TUNER_PHILIPS_SECAM, -1, -1, -1, -1, -1, "Pinnacle Studio PCTV USB (SECAM)"}, + {0x2304, 0x0110, -1, CODEC_SAA7111, 3, V4L2_STD_PAL, 1, 1, 1, 1, TUNER_PHILIPS_PAL, -1, -1,128, 23, -1, "Pinnacle Studio PCTV USB (PAL) FM"}, + {0x2304, 0x0111, -1, CODEC_SAA7111, 3, V4L2_STD_PAL, 1, 0, 1, 1, TUNER_PHILIPS_PAL, -1, -1, -1, -1, -1, "Miro PCTV USB"}, + {0x2304, 0x0112, -1, CODEC_SAA7111, 3, V4L2_STD_NTSC, 1, 1, 1, 1, TUNER_PHILIPS_NTSC_M, -1, -1, -1, -1, -1, "Pinnacle Studio PCTV USB (NTSC) FM"}, + {0x2304, 0x0210, -1, CODEC_SAA7113, 3, V4L2_STD_PAL, 1, 1, 1, 1, TUNER_TEMIC_4009FR5_PAL, -1, -1, 0, 3, 7, "Pinnacle Studio PCTV USB (PAL) FM"}, + {0x2304, 0x0212, -1, CODEC_SAA7111, 3, V4L2_STD_NTSC, 1, 1, 1, 1, TUNER_TEMIC_4039FR5_NTSC, -1, -1, 0, 3, 7, "Pinnacle Studio PCTV USB (NTSC) FM"}, + {0x2304, 0x0214, -1, CODEC_SAA7113, 3, V4L2_STD_PAL, 1, 1, 1, 1, TUNER_TEMIC_4009FR5_PAL, -1, -1, 0, 3, 7, "Pinnacle Studio PCTV USB (PAL) FM"}, + {0x2304, 0x0300, -1, CODEC_SAA7113, 2, V4L2_STD_NTSC, 1, 0, 1, 0, 0, -1, -1, 0, 3, 7, "Pinnacle Studio Linx Video input cable (NTSC)"}, + {0x2304, 0x0301, -1, CODEC_SAA7113, 2, V4L2_STD_PAL, 1, 0, 1, 0, 0, -1, -1, 0, 3, 7, "Pinnacle Studio Linx Video input cable (PAL)"}, + {0x2304, 0x0419, -1, CODEC_SAA7113, 3, V4L2_STD_PAL, 1, 1, 1, 1, TUNER_TEMIC_4009FR5_PAL, -1, -1, 0, 3, 7, "Pinnacle PCTV Bungee USB (PAL) FM"}, + {0x2400, 0x4200, -1, CODEC_SAA7111, 3, VIDEO_MODE_NTSC, 1, 0, 1, 1, TUNER_PHILIPS_NTSC_M, -1, -1, -1, -1, -1, "Hauppauge WinTv-USB"}, + {} /* Terminating entry */ +}; + +/* Supported Devices */ + +struct usb_device_id usbvision_table [] = { + { USB_DEVICE(0xFFF0, 0xFFF0) }, /* Custom Dummy USBVision Device */ + { USB_DEVICE(0x0A6F, 0x0400) }, /* Xanboo */ + { USB_DEVICE(0x050d, 0x0208) }, /* Belkin USBView II */ + { USB_DEVICE(0x0571, 0x0002) }, /* echoFX InterView Lite */ + { USB_DEVICE(0x0573, 0x0003) }, /* USBGear USBG-V1 */ + { USB_DEVICE(0x0573, 0x0400) }, /* D-Link V100 */ + { USB_DEVICE(0x0573, 0x2000) }, /* X10 USB Camera */ + { USB_DEVICE(0x0573, 0x2d00) }, /* Osprey 50 */ + { USB_DEVICE(0x0573, 0x2d01) }, /* Hauppauge USB-Live Model 600 */ + { USB_DEVICE(0x0573, 0x2101) }, /* Zoran Co. PMD (Nogatech) AV-grabber Manhattan */ + { USB_DEVICE(0x0573, 0x4100) }, /* Nogatech USB-TV FM (NTSC) */ + { USB_DEVICE(0x0573, 0x4110) }, /* PNY USB-TV (NTSC) FM */ + { USB_DEVICE(0x0573, 0x4450) }, /* PixelView PlayTv-USB PRO (PAL) FM */ + { USB_DEVICE(0x0573, 0x4550) }, /* ZTV ZT-721 2.4GHz USB A/V Receiver */ + { USB_DEVICE(0x0573, 0x4d00) }, /* Hauppauge WinTv-USB USA */ + { USB_DEVICE(0x0573, 0x4d01) }, /* Hauppauge WinTv-USB */ + { USB_DEVICE(0x0573, 0x4d02) }, /* Hauppauge WinTv-USB UK */ + { USB_DEVICE(0x0573, 0x4d03) }, /* Hauppauge WinTv-USB France */ + { USB_DEVICE(0x0573, 0x4d10) }, /* Hauppauge WinTv-USB with FM USA radio */ + { USB_DEVICE(0x0573, 0x4d11) }, /* Hauppauge WinTv-USB (PAL) with FM radio */ + { USB_DEVICE(0x0573, 0x4d12) }, /* Hauppauge WinTv-USB UK with FM Radio */ + { USB_DEVICE(0x0573, 0x4d2a) }, /* Hauppague WinTv USB Model 602 40201 Rev B285 */ + { USB_DEVICE(0x0573, 0x4d2b) }, /* Hauppague WinTv USB Model 602 40201 Rev B282 */ + { USB_DEVICE(0x0573, 0x4d2c) }, /* Hauppague WinTv USB Model 40209 Rev. E1A5 PAL*/ + { USB_DEVICE(0x0573, 0x4d20) }, /* Hauppauge WinTv-USB II (PAL) FM Model 40201 Rev B226 */ + { USB_DEVICE(0x0573, 0x4d21) }, /* Hauppauge WinTv-USB II (PAL) with FM radio*/ + { USB_DEVICE(0x0573, 0x4d22) }, /* Hauppauge WinTv-USB II (PAL) Model 566 */ + { USB_DEVICE(0x0573, 0x4d23) }, /* Hauppauge WinTv-USB France 4D23*/ + { USB_DEVICE(0x0573, 0x4d25) }, /* Hauppauge WinTv-USB Model 40209 rev B234 */ + { USB_DEVICE(0x0573, 0x4d26) }, /* Hauppauge WinTv-USB Model 40209 Rev B243 */ + { USB_DEVICE(0x0573, 0x4d27) }, /* Hauppauge WinTv-USB Model 40204 Rev B281 */ + { USB_DEVICE(0x0573, 0x4d28) }, /* Hauppauge WinTv-USB Model 40204 Rev B283 */ + { USB_DEVICE(0x0573, 0x4d29) }, /* Hauppauge WinTv-USB Model 40205 Rev B298 */ + { USB_DEVICE(0x0573, 0x4d30) }, /* Hauppauge WinTv-USB FM Model 40211 Rev B123 */ + { USB_DEVICE(0x0573, 0x4d31) }, /* Hauppauge WinTv-USB III (PAL) with FM radio Model 568 */ + { USB_DEVICE(0x0573, 0x4d32) }, /* Hauppauge WinTv-USB III (PAL) FM Model 573 */ + { USB_DEVICE(0x0573, 0x4d35) }, /* Hauppauge WinTv-USB III (SECAM) FM Model 40219 Rev B252 */ + { USB_DEVICE(0x0573, 0x4d37) }, /* Hauppauge WinTv-USB Model 40219 Rev E189 */ + { USB_DEVICE(0x0768, 0x0006) }, /* Camtel Technology USB TV Genie Pro FM Model TVB330 */ + { USB_DEVICE(0x07d0, 0x0001) }, /* Digital Video Creator I */ + { USB_DEVICE(0x07d0, 0x0002) }, /* Global Village GV-007 (NTSC) */ + { USB_DEVICE(0x07d0, 0x0003) }, /* Dazzle Fusion Model DVC-50 Rev 1 (NTSC) */ + { USB_DEVICE(0x07d0, 0x0004) }, /* Dazzle Fusion Model DVC-80 Rev 1 (PAL) */ + { USB_DEVICE(0x07d0, 0x0005) }, /* Dazzle Fusion Model DVC-90 Rev 1 (SECAM) */ + { USB_DEVICE(0x2304, 0x010d) }, /* Pinnacle Studio PCTV USB (PAL) */ + { USB_DEVICE(0x2304, 0x0109) }, /* Pinnacle Studio PCTV USB (SECAM) */ + { USB_DEVICE(0x2304, 0x0110) }, /* Pinnacle Studio PCTV USB (PAL) */ + { USB_DEVICE(0x2304, 0x0111) }, /* Miro PCTV USB */ + { USB_DEVICE(0x2304, 0x0112) }, /* Pinnacle Studio PCTV USB (NTSC) with FM radio */ + { USB_DEVICE(0x2304, 0x0210) }, /* Pinnacle Studio PCTV USB (PAL) with FM radio */ + { USB_DEVICE(0x2304, 0x0212) }, /* Pinnacle Studio PCTV USB (NTSC) with FM radio */ + { USB_DEVICE(0x2304, 0x0214) }, /* Pinnacle Studio PCTV USB (PAL) with FM radio */ + { USB_DEVICE(0x2304, 0x0300) }, /* Pinnacle Studio Linx Video input cable (NTSC) */ + { USB_DEVICE(0x2304, 0x0301) }, /* Pinnacle Studio Linx Video input cable (PAL) */ + { USB_DEVICE(0x2304, 0x0419) }, /* Pinnacle PCTV Bungee USB (PAL) FM */ + + { USB_DEVICE(0x2400, 0x4200) }, /* Hauppauge WinTv-USB2 Model 42012 */ + + { } /* Terminating entry */ +}; + +MODULE_DEVICE_TABLE (usb, usbvision_table); diff --git a/drivers/media/video/usbvision/usbvision-core.c b/drivers/media/video/usbvision/usbvision-core.c new file mode 100644 index 00000000000..797b97baf9e --- /dev/null +++ b/drivers/media/video/usbvision/usbvision-core.c @@ -0,0 +1,2554 @@ +/* + * usbvision-core.c - driver for NT100x USB video capture devices + * + * + * Copyright (c) 1999-2005 Joerg Heckenbach <joerg@heckenbach-aw.de> + * Dwaine Garden <dwainegarden@rogers.com> + * + * This module is part of usbvision driver project. + * Updates to driver completed by Dwaine P. Garden + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include <linux/kernel.h> +#include <linux/sched.h> +#include <linux/list.h> +#include <linux/timer.h> +#include <linux/slab.h> +#include <linux/mm.h> +#include <linux/utsname.h> +#include <linux/highmem.h> +#include <linux/smp_lock.h> +#include <linux/videodev.h> +#include <linux/vmalloc.h> +#include <linux/module.h> +#include <linux/init.h> +#include <linux/spinlock.h> +#include <asm/io.h> +#include <linux/videodev2.h> +#include <linux/video_decoder.h> +#include <linux/i2c.h> + +#include <media/saa7115.h> +#include <media/v4l2-common.h> +#include <media/tuner.h> +#include <media/audiochip.h> + +#include <linux/moduleparam.h> +#include <linux/workqueue.h> + +#ifdef CONFIG_KMOD +#include <linux/kmod.h> +#endif + +#include "usbvision.h" + +static unsigned int core_debug = 0; +module_param(core_debug,int,0644); +MODULE_PARM_DESC(core_debug,"enable debug messages [core]"); + +static unsigned int force_testpattern = 0; +module_param(force_testpattern,int,0644); +MODULE_PARM_DESC(force_testpattern,"enable test pattern display [core]"); + +static int adjustCompression = 1; // Set the compression to be adaptive +module_param(adjustCompression, int, 0444); +MODULE_PARM_DESC(adjustCompression, " Set the ADPCM compression for the device. Default: 1 (On)"); + +static int SwitchSVideoInput = 0; // To help people with Black and White output with using s-video input. Some cables and input device are wired differently. +module_param(SwitchSVideoInput, int, 0444); +MODULE_PARM_DESC(SwitchSVideoInput, " Set the S-Video input. Some cables and input device are wired differently. Default: 0 (Off)"); + +#define ENABLE_HEXDUMP 0 /* Enable if you need it */ + + +#ifdef USBVISION_DEBUG + #define PDEBUG(level, fmt, args...) \ + if (core_debug & (level)) info("[%s:%d] " fmt, __PRETTY_FUNCTION__, __LINE__ , ## args) +#else + #define PDEBUG(level, fmt, args...) do {} while(0) +#endif + +#define DBG_HEADER 1<<0 +#define DBG_IRQ 1<<1 +#define DBG_ISOC 1<<2 +#define DBG_PARSE 1<<3 +#define DBG_SCRATCH 1<<4 +#define DBG_FUNC 1<<5 + +static const int max_imgwidth = MAX_FRAME_WIDTH; +static const int max_imgheight = MAX_FRAME_HEIGHT; +static const int min_imgwidth = MIN_FRAME_WIDTH; +static const int min_imgheight = MIN_FRAME_HEIGHT; + +/* The value of 'scratch_buf_size' affects quality of the picture + * in many ways. Shorter buffers may cause loss of data when client + * is too slow. Larger buffers are memory-consuming and take longer + * to work with. This setting can be adjusted, but the default value + * should be OK for most desktop users. + */ +#define DEFAULT_SCRATCH_BUF_SIZE (0x20000) // 128kB memory scratch buffer +static const int scratch_buf_size = DEFAULT_SCRATCH_BUF_SIZE; + +// Function prototypes +static int usbvision_request_intra (struct usb_usbvision *usbvision); +static int usbvision_unrequest_intra (struct usb_usbvision *usbvision); +static int usbvision_adjust_compression (struct usb_usbvision *usbvision); +static int usbvision_measure_bandwidth (struct usb_usbvision *usbvision); + +/*******************************/ +/* Memory management functions */ +/*******************************/ + +/* + * Here we want the physical address of the memory. + * This is used when initializing the contents of the area. + */ + +void *usbvision_rvmalloc(unsigned long size) +{ + void *mem; + unsigned long adr; + + size = PAGE_ALIGN(size); + mem = vmalloc_32(size); + if (!mem) + return NULL; + + memset(mem, 0, size); /* Clear the ram out, no junk to the user */ + adr = (unsigned long) mem; + while (size > 0) { + SetPageReserved(vmalloc_to_page((void *)adr)); + adr += PAGE_SIZE; + size -= PAGE_SIZE; + } + + return mem; +} + +void usbvision_rvfree(void *mem, unsigned long size) +{ + unsigned long adr; + + if (!mem) + return; + + size = PAGE_ALIGN(size); + + adr = (unsigned long) mem; + while ((long) size > 0) { + ClearPageReserved(vmalloc_to_page((void *)adr)); + adr += PAGE_SIZE; + size -= PAGE_SIZE; + } + + vfree(mem); +} + + + +#if ENABLE_HEXDUMP +static void usbvision_hexdump(const unsigned char *data, int len) +{ + char tmp[80]; + int i, k; + + for (i = k = 0; len > 0; i++, len--) { + if (i > 0 && (i % 16 == 0)) { + printk("%s\n", tmp); + k = 0; + } + k += sprintf(&tmp[k], "%02x ", data[i]); + } + if (k > 0) + printk("%s\n", tmp); +} +#endif + +/******************************** + * scratch ring buffer handling + ********************************/ +int scratch_len(struct usb_usbvision *usbvision) /*This returns the amount of data actually in the buffer */ +{ + int len = usbvision->scratch_write_ptr - usbvision->scratch_read_ptr; + if (len < 0) { + len += scratch_buf_size; + } + PDEBUG(DBG_SCRATCH, "scratch_len() = %d\n", len); + + return len; +} + + +/* This returns the free space left in the buffer */ +int scratch_free(struct usb_usbvision *usbvision) +{ + int free = usbvision->scratch_read_ptr - usbvision->scratch_write_ptr; + if (free <= 0) { + free += scratch_buf_size; + } + if (free) { + free -= 1; /* at least one byte in the buffer must */ + /* left blank, otherwise there is no chance to differ between full and empty */ + } + PDEBUG(DBG_SCRATCH, "return %d\n", free); + + return free; +} + + +/* This puts data into the buffer */ +int scratch_put(struct usb_usbvision *usbvision, unsigned char *data, int len) +{ + int len_part; + + if (usbvision->scratch_write_ptr + len < scratch_buf_size) { + memcpy(usbvision->scratch + usbvision->scratch_write_ptr, data, len); + usbvision->scratch_write_ptr += len; + } + else { + len_part = scratch_buf_size - usbvision->scratch_write_ptr; + memcpy(usbvision->scratch + usbvision->scratch_write_ptr, data, len_part); + if (len == len_part) { + usbvision->scratch_write_ptr = 0; /* just set write_ptr to zero */ + } + else { + memcpy(usbvision->scratch, data + len_part, len - len_part); + usbvision->scratch_write_ptr = len - len_part; + } + } + + PDEBUG(DBG_SCRATCH, "len=%d, new write_ptr=%d\n", len, usbvision->scratch_write_ptr); + + return len; +} + +/* This marks the write_ptr as position of new frame header */ +void scratch_mark_header(struct usb_usbvision *usbvision) +{ + PDEBUG(DBG_SCRATCH, "header at write_ptr=%d\n", usbvision->scratch_headermarker_write_ptr); + + usbvision->scratch_headermarker[usbvision->scratch_headermarker_write_ptr] = + usbvision->scratch_write_ptr; + usbvision->scratch_headermarker_write_ptr += 1; + usbvision->scratch_headermarker_write_ptr %= USBVISION_NUM_HEADERMARKER; +} + +/* This gets data from the buffer at the given "ptr" position */ +int scratch_get_extra(struct usb_usbvision *usbvision, unsigned char *data, int *ptr, int len) +{ + int len_part; + if (*ptr + len < scratch_buf_size) { + memcpy(data, usbvision->scratch + *ptr, len); + *ptr += len; + } + else { + len_part = scratch_buf_size - *ptr; + memcpy(data, usbvision->scratch + *ptr, len_part); + if (len == len_part) { + *ptr = 0; /* just set the y_ptr to zero */ + } + else { + memcpy(data + len_part, usbvision->scratch, len - len_part); + *ptr = len - len_part; + } + } + + PDEBUG(DBG_SCRATCH, "len=%d, new ptr=%d\n", len, *ptr); + + return len; +} + + +/* This sets the scratch extra read pointer */ +void scratch_set_extra_ptr(struct usb_usbvision *usbvision, int *ptr, int len) +{ + *ptr = (usbvision->scratch_read_ptr + len)%scratch_buf_size; + + PDEBUG(DBG_SCRATCH, "ptr=%d\n", *ptr); +} + + +/*This increments the scratch extra read pointer */ +void scratch_inc_extra_ptr(int *ptr, int len) +{ + *ptr = (*ptr + len) % scratch_buf_size; + + PDEBUG(DBG_SCRATCH, "ptr=%d\n", *ptr); +} + + +/* This gets data from the buffer */ +int scratch_get(struct usb_usbvision *usbvision, unsigned char *data, int len) +{ + int len_part; + if (usbvision->scratch_read_ptr + len < scratch_buf_size) { + memcpy(data, usbvision->scratch + usbvision->scratch_read_ptr, len); + usbvision->scratch_read_ptr += len; + } + else { + len_part = scratch_buf_size - usbvision->scratch_read_ptr; + memcpy(data, usbvision->scratch + usbvision->scratch_read_ptr, len_part); + if (len == len_part) { + usbvision->scratch_read_ptr = 0; /* just set the read_ptr to zero */ + } + else { + memcpy(data + len_part, usbvision->scratch, len - len_part); + usbvision->scratch_read_ptr = len - len_part; + } + } + + PDEBUG(DBG_SCRATCH, "len=%d, new read_ptr=%d\n", len, usbvision->scratch_read_ptr); + + return len; +} + + +/* This sets read pointer to next header and returns it */ +int scratch_get_header(struct usb_usbvision *usbvision,struct usbvision_frame_header *header) +{ + int errCode = 0; + + PDEBUG(DBG_SCRATCH, "from read_ptr=%d", usbvision->scratch_headermarker_read_ptr); + + while (usbvision->scratch_headermarker_write_ptr - + usbvision->scratch_headermarker_read_ptr != 0) { + usbvision->scratch_read_ptr = + usbvision->scratch_headermarker[usbvision->scratch_headermarker_read_ptr]; + usbvision->scratch_headermarker_read_ptr += 1; + usbvision->scratch_headermarker_read_ptr %= USBVISION_NUM_HEADERMARKER; + scratch_get(usbvision, (unsigned char *)header, USBVISION_HEADER_LENGTH); + if ((header->magic_1 == USBVISION_MAGIC_1) + && (header->magic_2 == USBVISION_MAGIC_2) + && (header->headerLength == USBVISION_HEADER_LENGTH)) { + errCode = USBVISION_HEADER_LENGTH; + header->frameWidth = header->frameWidthLo + (header->frameWidthHi << 8); + header->frameHeight = header->frameHeightLo + (header->frameHeightHi << 8); + break; + } + } + + return errCode; +} + + +/*This removes len bytes of old data from the buffer */ +void scratch_rm_old(struct usb_usbvision *usbvision, int len) +{ + + usbvision->scratch_read_ptr += len; + usbvision->scratch_read_ptr %= scratch_buf_size; + PDEBUG(DBG_SCRATCH, "read_ptr is now %d\n", usbvision->scratch_read_ptr); +} + + +/*This resets the buffer - kills all data in it too */ +void scratch_reset(struct usb_usbvision *usbvision) +{ + PDEBUG(DBG_SCRATCH, "\n"); + + usbvision->scratch_read_ptr = 0; + usbvision->scratch_write_ptr = 0; + usbvision->scratch_headermarker_read_ptr = 0; + usbvision->scratch_headermarker_write_ptr = 0; + usbvision->isocstate = IsocState_NoFrame; +} + +int usbvision_scratch_alloc(struct usb_usbvision *usbvision) +{ + usbvision->scratch = vmalloc(scratch_buf_size); + scratch_reset(usbvision); + if(usbvision->scratch == NULL) { + err("%s: unable to allocate %d bytes for scratch", + __FUNCTION__, scratch_buf_size); + return -ENOMEM; + } + return 0; +} + +void usbvision_scratch_free(struct usb_usbvision *usbvision) +{ + if (usbvision->scratch != NULL) { + vfree(usbvision->scratch); + usbvision->scratch = NULL; + } +} + +/* + * usbvision_testpattern() + * + * Procedure forms a test pattern (yellow grid on blue background). + * + * Parameters: + * fullframe: if TRUE then entire frame is filled, otherwise the procedure + * continues from the current scanline. + * pmode 0: fill the frame with solid blue color (like on VCR or TV) + * 1: Draw a colored grid + * + */ +void usbvision_testpattern(struct usb_usbvision *usbvision, int fullframe, + int pmode) +{ + static const char proc[] = "usbvision_testpattern"; + struct usbvision_frame *frame; + unsigned char *f; + int num_cell = 0; + int scan_length = 0; + static int num_pass = 0; + + if (usbvision == NULL) { + printk(KERN_ERR "%s: usbvision == NULL\n", proc); + return; + } + if (usbvision->curFrame == NULL) { + printk(KERN_ERR "%s: usbvision->curFrame is NULL.\n", proc); + return; + } + + /* Grab the current frame */ + frame = usbvision->curFrame; + + /* Optionally start at the beginning */ + if (fullframe) { + frame->curline = 0; + frame->scanlength = 0; + } + + /* Form every scan line */ + for (; frame->curline < frame->frmheight; frame->curline++) { + int i; + + f = frame->data + (usbvision->curwidth * 3 * frame->curline); + for (i = 0; i < usbvision->curwidth; i++) { + unsigned char cb = 0x80; + unsigned char cg = 0; + unsigned char cr = 0; + + if (pmode == 1) { + if (frame->curline % 32 == 0) + cb = 0, cg = cr = 0xFF; + else if (i % 32 == 0) { + if (frame->curline % 32 == 1) + num_cell++; + cb = 0, cg = cr = 0xFF; + } else { + cb = + ((num_cell * 7) + + num_pass) & 0xFF; + cg = + ((num_cell * 5) + + num_pass * 2) & 0xFF; + cr = + ((num_cell * 3) + + num_pass * 3) & 0xFF; + } + } else { + /* Just the blue screen */ + } + + *f++ = cb; + *f++ = cg; + *f++ = cr; + scan_length += 3; + } + } + + frame->grabstate = FrameState_Done; + frame->scanlength += scan_length; + ++num_pass; + +} + +/* + * usbvision_decompress_alloc() + * + * allocates intermediate buffer for decompression + */ +int usbvision_decompress_alloc(struct usb_usbvision *usbvision) +{ + int IFB_size = MAX_FRAME_WIDTH * MAX_FRAME_HEIGHT * 3 / 2; + usbvision->IntraFrameBuffer = vmalloc(IFB_size); + if (usbvision->IntraFrameBuffer == NULL) { + err("%s: unable to allocate %d for compr. frame buffer", __FUNCTION__, IFB_size); + return -ENOMEM; + } + return 0; +} + +/* + * usbvision_decompress_free() + * + * frees intermediate buffer for decompression + */ +void usbvision_decompress_free(struct usb_usbvision *usbvision) +{ + if (usbvision->IntraFrameBuffer != NULL) { + vfree(usbvision->IntraFrameBuffer); + usbvision->IntraFrameBuffer = NULL; + } +} + +/************************************************************ + * Here comes the data parsing stuff that is run as interrupt + ************************************************************/ +/* + * usbvision_find_header() + * + * Locate one of supported header markers in the scratch buffer. + */ +static enum ParseState usbvision_find_header(struct usb_usbvision *usbvision) +{ + struct usbvision_frame *frame; + int foundHeader = 0; + + frame = usbvision->curFrame; + + while (scratch_get_header(usbvision, &frame->isocHeader) == USBVISION_HEADER_LENGTH) { + // found header in scratch + PDEBUG(DBG_HEADER, "found header: 0x%02x%02x %d %d %d %d %#x 0x%02x %u %u", + frame->isocHeader.magic_2, + frame->isocHeader.magic_1, + frame->isocHeader.headerLength, + frame->isocHeader.frameNum, + frame->isocHeader.framePhase, + frame->isocHeader.frameLatency, + frame->isocHeader.dataFormat, + frame->isocHeader.formatParam, + frame->isocHeader.frameWidth, + frame->isocHeader.frameHeight); + + if (usbvision->requestIntra) { + if (frame->isocHeader.formatParam & 0x80) { + foundHeader = 1; + usbvision->lastIsocFrameNum = -1; // do not check for lost frames this time + usbvision_unrequest_intra(usbvision); + break; + } + } + else { + foundHeader = 1; + break; + } + } + + if (foundHeader) { + frame->frmwidth = frame->isocHeader.frameWidth * usbvision->stretch_width; + frame->frmheight = frame->isocHeader.frameHeight * usbvision->stretch_height; + frame->v4l2_linesize = (frame->frmwidth * frame->v4l2_format.depth)>> 3; + } + else { // no header found + PDEBUG(DBG_HEADER, "skipping scratch data, no header"); + scratch_reset(usbvision); + return ParseState_EndParse; + } + + // found header + if (frame->isocHeader.dataFormat==ISOC_MODE_COMPRESS) { + //check isocHeader.frameNum for lost frames + if (usbvision->lastIsocFrameNum >= 0) { + if (((usbvision->lastIsocFrameNum + 1) % 32) != frame->isocHeader.frameNum) { + // unexpected frame drop: need to request new intra frame + PDEBUG(DBG_HEADER, "Lost frame before %d on USB", frame->isocHeader.frameNum); + usbvision_request_intra(usbvision); + return ParseState_NextFrame; + } + } + usbvision->lastIsocFrameNum = frame->isocHeader.frameNum; + } + usbvision->header_count++; + frame->scanstate = ScanState_Lines; + frame->curline = 0; + + if (force_testpattern) { + usbvision_testpattern(usbvision, 1, 1); + return ParseState_NextFrame; + } + return ParseState_Continue; +} + +static enum ParseState usbvision_parse_lines_422(struct usb_usbvision *usbvision, + long *pcopylen) +{ + volatile struct usbvision_frame *frame; + unsigned char *f; + int len; + int i; + unsigned char yuyv[4]={180, 128, 10, 128}; // YUV components + unsigned char rv, gv, bv; // RGB components + int clipmask_index, bytes_per_pixel; + int stretch_bytes, clipmask_add; + + frame = usbvision->curFrame; + f = frame->data + (frame->v4l2_linesize * frame->curline); + + /* Make sure there's enough data for the entire line */ + len = (frame->isocHeader.frameWidth * 2)+5; + if (scratch_len(usbvision) < len) { + PDEBUG(DBG_PARSE, "out of data in line %d, need %u.\n", frame->curline, len); + return ParseState_Out; + } + + if ((frame->curline + 1) >= frame->frmheight) { + return ParseState_NextFrame; + } + + bytes_per_pixel = frame->v4l2_format.bytes_per_pixel; + stretch_bytes = (usbvision->stretch_width - 1) * bytes_per_pixel; + clipmask_index = frame->curline * MAX_FRAME_WIDTH; + clipmask_add = usbvision->stretch_width; + + for (i = 0; i < frame->frmwidth; i+=(2 * usbvision->stretch_width)) { + + scratch_get(usbvision, &yuyv[0], 4); + + if (frame->v4l2_format.format == V4L2_PIX_FMT_YUYV) { + *f++ = yuyv[0]; // Y + *f++ = yuyv[3]; // U + } + else { + + YUV_TO_RGB_BY_THE_BOOK(yuyv[0], yuyv[1], yuyv[3], rv, gv, bv); + switch (frame->v4l2_format.format) { + case V4L2_PIX_FMT_RGB565: + *f++ = (0x1F & (bv >> 3)) | (0xE0 & (gv << 3)); + *f++ = (0x07 & (gv >> 5)) | (0xF8 & rv); + break; + case V4L2_PIX_FMT_RGB24: + *f++ = bv; + *f++ = gv; + *f++ = rv; + break; + case V4L2_PIX_FMT_RGB32: + *f++ = bv; + *f++ = gv; + *f++ = rv; + f++; + break; + case V4L2_PIX_FMT_RGB555: + *f++ = (0x1F & (bv >> 3)) | (0xE0 & (gv << 2)); + *f++ = (0x03 & (gv >> 6)) | (0x7C & (rv >> 1)); + break; + } + } + clipmask_index += clipmask_add; + f += stretch_bytes; + + if (frame->v4l2_format.format == V4L2_PIX_FMT_YUYV) { + *f++ = yuyv[2]; // Y + *f++ = yuyv[1]; // V + } + else { + + YUV_TO_RGB_BY_THE_BOOK(yuyv[2], yuyv[1], yuyv[3], rv, gv, bv); + switch (frame->v4l2_format.format) { + case V4L2_PIX_FMT_RGB565: + *f++ = (0x1F & (bv >> 3)) | (0xE0 & (gv << 3)); + *f++ = (0x07 & (gv >> 5)) | (0xF8 & rv); + break; + case V4L2_PIX_FMT_RGB24: + *f++ = bv; + *f++ = gv; + *f++ = rv; + break; + case V4L2_PIX_FMT_RGB32: + *f++ = bv; + *f++ = gv; + *f++ = rv; + f++; + break; + case V4L2_PIX_FMT_RGB555: + *f++ = (0x1F & (bv >> 3)) | (0xE0 & (gv << 2)); + *f++ = (0x03 & (gv >> 6)) | (0x7C & (rv >> 1)); + break; + } + } + clipmask_index += clipmask_add; + f += stretch_bytes; + } + + frame->curline += usbvision->stretch_height; + *pcopylen += frame->v4l2_linesize * usbvision->stretch_height; + + if (frame->curline >= frame->frmheight) { + return ParseState_NextFrame; + } + else { + return ParseState_Continue; + } +} + +/* The decompression routine */ +static int usbvision_decompress(struct usb_usbvision *usbvision,unsigned char *Compressed, + unsigned char *Decompressed, int *StartPos, + int *BlockTypeStartPos, int Len) +{ + int RestPixel, Idx, MaxPos, Pos, ExtraPos, BlockLen, BlockTypePos, BlockTypeLen; + unsigned char BlockByte, BlockCode, BlockType, BlockTypeByte, Integrator; + + Integrator = 0; + Pos = *StartPos; + BlockTypePos = *BlockTypeStartPos; + MaxPos = 396; //Pos + Len; + ExtraPos = Pos; + BlockLen = 0; + BlockByte = 0; + BlockCode = 0; + BlockType = 0; + BlockTypeByte = 0; + BlockTypeLen = 0; + RestPixel = Len; + + for (Idx = 0; Idx < Len; Idx++) { + + if (BlockLen == 0) { + if (BlockTypeLen==0) { + BlockTypeByte = Compressed[BlockTypePos]; + BlockTypePos++; + BlockTypeLen = 4; + } + BlockType = (BlockTypeByte & 0xC0) >> 6; + + //statistic: + usbvision->ComprBlockTypes[BlockType]++; + + Pos = ExtraPos; + if (BlockType == 0) { + if(RestPixel >= 24) { + Idx += 23; + RestPixel -= 24; + Integrator = Decompressed[Idx]; + } else { + Idx += RestPixel - 1; + RestPixel = 0; + } + } else { + BlockCode = Compressed[Pos]; + Pos++; + if (RestPixel >= 24) { + BlockLen = 24; + } else { + BlockLen = RestPixel; + } + RestPixel -= BlockLen; + ExtraPos = Pos + (BlockLen / 4); + } + BlockTypeByte <<= 2; + BlockTypeLen -= 1; + } + if (BlockLen > 0) { + if ((BlockLen%4) == 0) { + BlockByte = Compressed[Pos]; + Pos++; + } + if (BlockType == 1) { //inter Block + Integrator = Decompressed[Idx]; + } + switch (BlockByte & 0xC0) { + case 0x03<<6: + Integrator += Compressed[ExtraPos]; + ExtraPos++; + break; + case 0x02<<6: + Integrator += BlockCode; + break; + case 0x00: + Integrator -= BlockCode; + break; + } + Decompressed[Idx] = Integrator; + BlockByte <<= 2; + BlockLen -= 1; + } + } + *StartPos = ExtraPos; + *BlockTypeStartPos = BlockTypePos; + return Idx; +} + + +/* + * usbvision_parse_compress() + * + * Parse compressed frame from the scratch buffer, put + * decoded RGB value into the current frame buffer and add the written + * number of bytes (RGB) to the *pcopylen. + * + */ +static enum ParseState usbvision_parse_compress(struct usb_usbvision *usbvision, + long *pcopylen) +{ +#define USBVISION_STRIP_MAGIC 0x5A +#define USBVISION_STRIP_LEN_MAX 400 +#define USBVISION_STRIP_HEADER_LEN 3 + + struct usbvision_frame *frame; + unsigned char *f,*u = NULL ,*v = NULL; + unsigned char StripData[USBVISION_STRIP_LEN_MAX]; + unsigned char StripHeader[USBVISION_STRIP_HEADER_LEN]; + int Idx, IdxEnd, StripLen, StripPtr, StartBlockPos, BlockPos, BlockTypePos; + int clipmask_index, bytes_per_pixel, rc; + int imageSize; + unsigned char rv, gv, bv; + static unsigned char *Y, *U, *V; + + frame = usbvision->curFrame; + imageSize = frame->frmwidth * frame->frmheight; + if ( (frame->v4l2_format.format == V4L2_PIX_FMT_YUV422P) || + (frame->v4l2_format.format == V4L2_PIX_FMT_YVU420) ) { // this is a planar format + //... v4l2_linesize not used here. + f = frame->data + (frame->width * frame->curline); + } else + f = frame->data + (frame->v4l2_linesize * frame->curline); + + if (frame->v4l2_format.format == V4L2_PIX_FMT_YUYV){ //initialise u and v pointers + // get base of u and b planes add halfoffset + + u = frame->data + + imageSize + + (frame->frmwidth >>1) * frame->curline ; + v = u + (imageSize >>1 ); + + } else if (frame->v4l2_format.format == V4L2_PIX_FMT_YVU420){ + + v = frame->data + imageSize + ((frame->curline* (frame->width))>>2) ; + u = v + (imageSize >>2) ; + } + + if (frame->curline == 0) { + usbvision_adjust_compression(usbvision); + } + + if (scratch_len(usbvision) < USBVISION_STRIP_HEADER_LEN) { + return ParseState_Out; + } + + //get strip header without changing the scratch_read_ptr + scratch_set_extra_ptr(usbvision, &StripPtr, 0); + scratch_get_extra(usbvision, &StripHeader[0], &StripPtr, + USBVISION_STRIP_HEADER_LEN); + + if (StripHeader[0] != USBVISION_STRIP_MAGIC) { + // wrong strip magic + usbvision->stripMagicErrors++; + return ParseState_NextFrame; + } + + if (frame->curline != (int)StripHeader[2]) { + //line number missmatch error + usbvision->stripLineNumberErrors++; + } + + StripLen = 2 * (unsigned int)StripHeader[1]; + if (StripLen > USBVISION_STRIP_LEN_MAX) { + // strip overrun + // I think this never happens + usbvision_request_intra(usbvision); + } + + if (scratch_len(usbvision) < StripLen) { + //there is not enough data for the strip + return ParseState_Out; + } + + if (usbvision->IntraFrameBuffer) { + Y = usbvision->IntraFrameBuffer + frame->frmwidth * frame->curline; + U = usbvision->IntraFrameBuffer + imageSize + (frame->frmwidth / 2) * (frame->curline / 2); + V = usbvision->IntraFrameBuffer + imageSize / 4 * 5 + (frame->frmwidth / 2) * (frame->curline / 2); + } + else { + return ParseState_NextFrame; + } + + bytes_per_pixel = frame->v4l2_format.bytes_per_pixel; + clipmask_index = frame->curline * MAX_FRAME_WIDTH; + + scratch_get(usbvision, StripData, StripLen); + + IdxEnd = frame->frmwidth; + BlockTypePos = USBVISION_STRIP_HEADER_LEN; + StartBlockPos = BlockTypePos + (IdxEnd - 1) / 96 + (IdxEnd / 2 - 1) / 96 + 2; + BlockPos = StartBlockPos; + + usbvision->BlockPos = BlockPos; + + if ((rc = usbvision_decompress(usbvision, StripData, Y, &BlockPos, &BlockTypePos, IdxEnd)) != IdxEnd) { + //return ParseState_Continue; + } + if (StripLen > usbvision->maxStripLen) { + usbvision->maxStripLen = StripLen; + } + + if (frame->curline%2) { + if ((rc = usbvision_decompress(usbvision, StripData, V, &BlockPos, &BlockTypePos, IdxEnd/2)) != IdxEnd/2) { + //return ParseState_Continue; + } + } + else { + if ((rc = usbvision_decompress(usbvision, StripData, U, &BlockPos, &BlockTypePos, IdxEnd/2)) != IdxEnd/2) { + //return ParseState_Continue; + } + } + + if (BlockPos > usbvision->comprBlockPos) { + usbvision->comprBlockPos = BlockPos; + } + if (BlockPos > StripLen) { + usbvision->stripLenErrors++; + } + + for (Idx = 0; Idx < IdxEnd; Idx++) { + if(frame->v4l2_format.format == V4L2_PIX_FMT_YUYV) { + *f++ = Y[Idx]; + *f++ = Idx & 0x01 ? U[Idx/2] : V[Idx/2]; + } + else if(frame->v4l2_format.format == V4L2_PIX_FMT_YUV422P) { + *f++ = Y[Idx]; + if ( Idx & 0x01) + *u++ = U[Idx>>1] ; + else + *v++ = V[Idx>>1]; + } + else if (frame->v4l2_format.format == V4L2_PIX_FMT_YVU420) { + *f++ = Y [Idx]; + if ( !(( Idx & 0x01 ) | ( frame->curline & 0x01 )) ){ + +/* only need do this for 1 in 4 pixels */ +/* intraframe buffer is YUV420 format */ + + *u++ = U[Idx >>1]; + *v++ = V[Idx >>1]; + } + + } + else { + YUV_TO_RGB_BY_THE_BOOK(Y[Idx], U[Idx/2], V[Idx/2], rv, gv, bv); + switch (frame->v4l2_format.format) { + case V4L2_PIX_FMT_GREY: + *f++ = Y[Idx]; + break; + case V4L2_PIX_FMT_RGB555: + *f++ = (0x1F & (bv >> 3)) | (0xE0 & (gv << 2)); + *f++ = (0x03 & (gv >> 6)) | (0x7C & (rv >> 1)); + break; + case V4L2_PIX_FMT_RGB565: + *f++ = (0x1F & (bv >> 3)) | (0xE0 & (gv << 3)); + *f++ = (0x07 & (gv >> 5)) | (0xF8 & rv); + break; + case V4L2_PIX_FMT_RGB24: + *f++ = bv; + *f++ = gv; + *f++ = rv; + break; + case V4L2_PIX_FMT_RGB32: + *f++ = bv; + *f++ = gv; + *f++ = rv; + f++; + break; + } + } + clipmask_index++; + } + /* Deal with non-integer no. of bytes for YUV420P */ + if (frame->v4l2_format.format != V4L2_PIX_FMT_YVU420 ) + *pcopylen += frame->v4l2_linesize; + else + *pcopylen += frame->curline & 0x01 ? frame->v4l2_linesize : frame->v4l2_linesize << 1; + + frame->curline += 1; + + if (frame->curline >= frame->frmheight) { + return ParseState_NextFrame; + } + else { + return ParseState_Continue; + } + +} + + +/* + * usbvision_parse_lines_420() + * + * Parse two lines from the scratch buffer, put + * decoded RGB value into the current frame buffer and add the written + * number of bytes (RGB) to the *pcopylen. + * + */ +static enum ParseState usbvision_parse_lines_420(struct usb_usbvision *usbvision, + long *pcopylen) +{ + struct usbvision_frame *frame; + unsigned char *f_even = NULL, *f_odd = NULL; + unsigned int pixel_per_line, block; + int pixel, block_split; + int y_ptr, u_ptr, v_ptr, y_odd_offset; + const int y_block_size = 128; + const int uv_block_size = 64; + const int sub_block_size = 32; + const int y_step[] = { 0, 0, 0, 2 }, y_step_size = 4; + const int uv_step[]= { 0, 0, 0, 4 }, uv_step_size = 4; + unsigned char y[2], u, v; /* YUV components */ + int y_, u_, v_, vb, uvg, ur; + int r_, g_, b_; /* RGB components */ + unsigned char g; + int clipmask_even_index, clipmask_odd_index, bytes_per_pixel; + int clipmask_add, stretch_bytes; + + frame = usbvision->curFrame; + f_even = frame->data + (frame->v4l2_linesize * frame->curline); + f_odd = f_even + frame->v4l2_linesize * usbvision->stretch_height; + + /* Make sure there's enough data for the entire line */ + /* In this mode usbvision transfer 3 bytes for every 2 pixels */ + /* I need two lines to decode the color */ + bytes_per_pixel = frame->v4l2_format.bytes_per_pixel; + stretch_bytes = (usbvision->stretch_width - 1) * bytes_per_pixel; + clipmask_even_index = frame->curline * MAX_FRAME_WIDTH; + clipmask_odd_index = clipmask_even_index + MAX_FRAME_WIDTH; + clipmask_add = usbvision->stretch_width; + pixel_per_line = frame->isocHeader.frameWidth; + + if (scratch_len(usbvision) < (int)pixel_per_line * 3) { + //printk(KERN_DEBUG "out of data, need %d\n", len); + return ParseState_Out; + } + + if ((frame->curline + 1) >= frame->frmheight) { + return ParseState_NextFrame; + } + + block_split = (pixel_per_line%y_block_size) ? 1 : 0; //are some blocks splitted into different lines? + + y_odd_offset = (pixel_per_line / y_block_size) * (y_block_size + uv_block_size) + + block_split * uv_block_size; + + scratch_set_extra_ptr(usbvision, &y_ptr, y_odd_offset); + scratch_set_extra_ptr(usbvision, &u_ptr, y_block_size); + scratch_set_extra_ptr(usbvision, &v_ptr, y_odd_offset + + (4 - block_split) * sub_block_size); + + for (block = 0; block < (pixel_per_line / sub_block_size); + block++) { + + + for (pixel = 0; pixel < sub_block_size; pixel +=2) { + scratch_get(usbvision, &y[0], 2); + scratch_get_extra(usbvision, &u, &u_ptr, 1); + scratch_get_extra(usbvision, &v, &v_ptr, 1); + + //I don't use the YUV_TO_RGB macro for better performance + v_ = v - 128; + u_ = u - 128; + vb = 132252 * v_; + uvg= -53281 * u_ - 25625 * v_; + ur = 104595 * u_; + + if(frame->v4l2_format.format == V4L2_PIX_FMT_YUYV) { + *f_even++ = y[0]; + *f_even++ = v; + } + else { + y_ = 76284 * (y[0] - 16); + + b_ = (y_ + vb) >> 16; + g_ = (y_ + uvg)>> 16; + r_ = (y_ + ur) >> 16; + + switch (frame->v4l2_format.format) { + case V4L2_PIX_FMT_RGB565: + g = LIMIT_RGB(g_); + *f_even++ = (0x1F & (LIMIT_RGB(b_) >> 3)) | (0xE0 & (g << 3)); + *f_even++ = (0x07 & ( g >> 5)) | (0xF8 & LIMIT_RGB(r_)); + break; + case V4L2_PIX_FMT_RGB24: + *f_even++ = LIMIT_RGB(b_); + *f_even++ = LIMIT_RGB(g_); + *f_even++ = LIMIT_RGB(r_); + break; + case V4L2_PIX_FMT_RGB32: + *f_even++ = LIMIT_RGB(b_); + *f_even++ = LIMIT_RGB(g_); + *f_even++ = LIMIT_RGB(r_); + f_even++; + break; + case V4L2_PIX_FMT_RGB555: + g = LIMIT_RGB(g_); + *f_even++ = (0x1F & (LIMIT_RGB(b_) >> 3)) | (0xE0 & (g << 2)); + *f_even++ = (0x03 & ( g >> 6)) | + (0x7C & (LIMIT_RGB(r_) >> 1)); + break; + } + } + clipmask_even_index += clipmask_add; + f_even += stretch_bytes; + + if(frame->v4l2_format.format == V4L2_PIX_FMT_YUYV) { + *f_even++ = y[1]; + *f_even++ = u; + } + else { + y_ = 76284 * (y[1] - 16); + + b_ = (y_ + vb) >> 16; + g_ = (y_ + uvg)>> 16; + r_ = (y_ + ur) >> 16; + + switch (frame->v4l2_format.format) { + case V4L2_PIX_FMT_RGB565: + g = LIMIT_RGB(g_); + *f_even++ = (0x1F & (LIMIT_RGB(b_) >> 3)) | (0xE0 & (g << 3)); + *f_even++ = (0x07 & ( g >> 5)) | (0xF8 & LIMIT_RGB(r_)); + break; + case V4L2_PIX_FMT_RGB24: + *f_even++ = LIMIT_RGB(b_); + *f_even++ = LIMIT_RGB(g_); + *f_even++ = LIMIT_RGB(r_); + break; + case V4L2_PIX_FMT_RGB32: + *f_even++ = LIMIT_RGB(b_); + *f_even++ = LIMIT_RGB(g_); + *f_even++ = LIMIT_RGB(r_); + f_even++; + break; + case V4L2_PIX_FMT_RGB555: + g = LIMIT_RGB(g_); + *f_even++ = (0x1F & (LIMIT_RGB(b_) >> 3)) | (0xE0 & (g << 2)); + *f_even++ = (0x03 & ( g >> 6)) | + (0x7C & (LIMIT_RGB(r_) >> 1)); + break; + } + } + clipmask_even_index += clipmask_add; + f_even += stretch_bytes; + + scratch_get_extra(usbvision, &y[0], &y_ptr, 2); + + if(frame->v4l2_format.format == V4L2_PIX_FMT_YUYV) { + *f_odd++ = y[0]; + *f_odd++ = v; + } + else { + y_ = 76284 * (y[0] - 16); + + b_ = (y_ + vb) >> 16; + g_ = (y_ + uvg)>> 16; + r_ = (y_ + ur) >> 16; + + switch (frame->v4l2_format.format) { + case V4L2_PIX_FMT_RGB565: + g = LIMIT_RGB(g_); + *f_odd++ = (0x1F & (LIMIT_RGB(b_) >> 3)) | (0xE0 & (g << 3)); + *f_odd++ = (0x07 & ( g >> 5)) | (0xF8 & LIMIT_RGB(r_)); + break; + case V4L2_PIX_FMT_RGB24: + *f_odd++ = LIMIT_RGB(b_); + *f_odd++ = LIMIT_RGB(g_); + *f_odd++ = LIMIT_RGB(r_); + break; + case V4L2_PIX_FMT_RGB32: + *f_odd++ = LIMIT_RGB(b_); + *f_odd++ = LIMIT_RGB(g_); + *f_odd++ = LIMIT_RGB(r_); + f_odd++; + break; + case V4L2_PIX_FMT_RGB555: + g = LIMIT_RGB(g_); + *f_odd++ = (0x1F & (LIMIT_RGB(b_) >> 3)) | (0xE0 & (g << 2)); + *f_odd++ = (0x03 & ( g >> 6)) | + (0x7C & (LIMIT_RGB(r_) >> 1)); + break; + } + } + clipmask_odd_index += clipmask_add; + f_odd += stretch_bytes; + + if(frame->v4l2_format.format == V4L2_PIX_FMT_YUYV) { + *f_odd++ = y[1]; + *f_odd++ = u; + } + else { + y_ = 76284 * (y[1] - 16); + + b_ = (y_ + vb) >> 16; + g_ = (y_ + uvg)>> 16; + r_ = (y_ + ur) >> 16; + + switch (frame->v4l2_format.format) { + case V4L2_PIX_FMT_RGB565: + g = LIMIT_RGB(g_); + *f_odd++ = (0x1F & (LIMIT_RGB(b_) >> 3)) | (0xE0 & (g << 3)); + *f_odd++ = (0x07 & ( g >> 5)) | (0xF8 & LIMIT_RGB(r_)); + break; + case V4L2_PIX_FMT_RGB24: + *f_odd++ = LIMIT_RGB(b_); + *f_odd++ = LIMIT_RGB(g_); + *f_odd++ = LIMIT_RGB(r_); + break; + case V4L2_PIX_FMT_RGB32: + *f_odd++ = LIMIT_RGB(b_); + *f_odd++ = LIMIT_RGB(g_); + *f_odd++ = LIMIT_RGB(r_); + f_odd++; + break; + case V4L2_PIX_FMT_RGB555: + g = LIMIT_RGB(g_); + *f_odd++ = (0x1F & (LIMIT_RGB(b_) >> 3)) | (0xE0 & (g << 2)); + *f_odd++ = (0x03 & ( g >> 6)) | + (0x7C & (LIMIT_RGB(r_) >> 1)); + break; + } + } + clipmask_odd_index += clipmask_add; + f_odd += stretch_bytes; + } + + scratch_rm_old(usbvision,y_step[block % y_step_size] * sub_block_size); + scratch_inc_extra_ptr(&y_ptr, y_step[(block + 2 * block_split) % y_step_size] + * sub_block_size); + scratch_inc_extra_ptr(&u_ptr, uv_step[block % uv_step_size] + * sub_block_size); + scratch_inc_extra_ptr(&v_ptr, uv_step[(block + 2 * block_split) % uv_step_size] + * sub_block_size); + } + + scratch_rm_old(usbvision, pixel_per_line * 3 / 2 + + block_split * sub_block_size); + + frame->curline += 2 * usbvision->stretch_height; + *pcopylen += frame->v4l2_linesize * 2 * usbvision->stretch_height; + + if (frame->curline >= frame->frmheight) + return ParseState_NextFrame; + else + return ParseState_Continue; +} + +/* + * usbvision_parse_data() + * + * Generic routine to parse the scratch buffer. It employs either + * usbvision_find_header() or usbvision_parse_lines() to do most + * of work. + * + */ +static void usbvision_parse_data(struct usb_usbvision *usbvision) +{ + struct usbvision_frame *frame; + enum ParseState newstate; + long copylen = 0; + unsigned long lock_flags; + + frame = usbvision->curFrame; + + PDEBUG(DBG_PARSE, "parsing len=%d\n", scratch_len(usbvision)); + + while (1) { + + newstate = ParseState_Out; + if (scratch_len(usbvision)) { + if (frame->scanstate == ScanState_Scanning) { + newstate = usbvision_find_header(usbvision); + } + else if (frame->scanstate == ScanState_Lines) { + if (usbvision->isocMode == ISOC_MODE_YUV420) { + newstate = usbvision_parse_lines_420(usbvision, ©len); + } + else if (usbvision->isocMode == ISOC_MODE_YUV422) { + newstate = usbvision_parse_lines_422(usbvision, ©len); + } + else if (usbvision->isocMode == ISOC_MODE_COMPRESS) { + newstate = usbvision_parse_compress(usbvision, ©len); + } + + } + } + if (newstate == ParseState_Continue) { + continue; + } + else if ((newstate == ParseState_NextFrame) || (newstate == ParseState_Out)) { + break; + } + else { + return; /* ParseState_EndParse */ + } + } + + if (newstate == ParseState_NextFrame) { + frame->grabstate = FrameState_Done; + do_gettimeofday(&(frame->timestamp)); + frame->sequence = usbvision->frame_num; + + spin_lock_irqsave(&usbvision->queue_lock, lock_flags); + list_move_tail(&(frame->frame), &usbvision->outqueue); + usbvision->curFrame = NULL; + spin_unlock_irqrestore(&usbvision->queue_lock, lock_flags); + + usbvision->frame_num++; + + /* This will cause the process to request another frame. */ + if (waitqueue_active(&usbvision->wait_frame)) { + PDEBUG(DBG_PARSE, "Wake up !"); + wake_up_interruptible(&usbvision->wait_frame); + } + } + else + frame->grabstate = FrameState_Grabbing; + + + /* Update the frame's uncompressed length. */ + frame->scanlength += copylen; +} + + +/* + * Make all of the blocks of data contiguous + */ +static int usbvision_compress_isochronous(struct usb_usbvision *usbvision, + struct urb *urb) +{ + unsigned char *packet_data; + int i, totlen = 0; + + for (i = 0; i < urb->number_of_packets; i++) { + int packet_len = urb->iso_frame_desc[i].actual_length; + int packet_stat = urb->iso_frame_desc[i].status; + + packet_data = urb->transfer_buffer + urb->iso_frame_desc[i].offset; + + /* Detect and ignore errored packets */ + if (packet_stat) { // packet_stat != 0 ????????????? + PDEBUG(DBG_ISOC, "data error: [%d] len=%d, status=%X", i, packet_len, packet_stat); + usbvision->isocErrCount++; + continue; + } + + /* Detect and ignore empty packets */ + if (packet_len < 0) { + PDEBUG(DBG_ISOC, "error packet [%d]", i); + usbvision->isocSkipCount++; + continue; + } + else if (packet_len == 0) { /* Frame end ????? */ + PDEBUG(DBG_ISOC, "null packet [%d]", i); + usbvision->isocstate=IsocState_NoFrame; + usbvision->isocSkipCount++; + continue; + } + else if (packet_len > usbvision->isocPacketSize) { + PDEBUG(DBG_ISOC, "packet[%d] > isocPacketSize", i); + usbvision->isocSkipCount++; + continue; + } + + PDEBUG(DBG_ISOC, "packet ok [%d] len=%d", i, packet_len); + + if (usbvision->isocstate==IsocState_NoFrame) { //new frame begins + usbvision->isocstate=IsocState_InFrame; + scratch_mark_header(usbvision); + usbvision_measure_bandwidth(usbvision); + PDEBUG(DBG_ISOC, "packet with header"); + } + + /* + * If usbvision continues to feed us with data but there is no + * consumption (if, for example, V4L client fell asleep) we + * may overflow the buffer. We have to move old data over to + * free room for new data. This is bad for old data. If we + * just drop new data then it's bad for new data... choose + * your favorite evil here. + */ + if (scratch_free(usbvision) < packet_len) { + + usbvision->scratch_ovf_count++; + PDEBUG(DBG_ISOC, "scratch buf overflow! scr_len: %d, n: %d", + scratch_len(usbvision), packet_len); + scratch_rm_old(usbvision, packet_len - scratch_free(usbvision)); + } + + /* Now we know that there is enough room in scratch buffer */ + scratch_put(usbvision, packet_data, packet_len); + totlen += packet_len; + usbvision->isocDataCount += packet_len; + usbvision->isocPacketCount++; + } +#if ENABLE_HEXDUMP + if (totlen > 0) { + static int foo = 0; + if (foo < 1) { + printk(KERN_DEBUG "+%d.\n", usbvision->scratchlen); + usbvision_hexdump(data0, (totlen > 64) ? 64 : totlen); + ++foo; + } + } +#endif + return totlen; +} + +static void usbvision_isocIrq(struct urb *urb) +{ + int errCode = 0; + int len; + struct usb_usbvision *usbvision = urb->context; + int i; + unsigned long startTime = jiffies; + struct usbvision_frame **f; + + /* We don't want to do anything if we are about to be removed! */ + if (!USBVISION_IS_OPERATIONAL(usbvision)) + return; + + f = &usbvision->curFrame; + + /* Manage streaming interruption */ + if (usbvision->streaming == Stream_Interrupt) { + usbvision->streaming = Stream_Idle; + if ((*f)) { + (*f)->grabstate = FrameState_Ready; + (*f)->scanstate = ScanState_Scanning; + } + PDEBUG(DBG_IRQ, "stream interrupted"); + wake_up_interruptible(&usbvision->wait_stream); + } + + /* Copy the data received into our scratch buffer */ + len = usbvision_compress_isochronous(usbvision, urb); + + usbvision->isocUrbCount++; + usbvision->urb_length = len; + + if (usbvision->streaming == Stream_On) { + + /* If we collected enough data let's parse! */ + if (scratch_len(usbvision) > USBVISION_HEADER_LENGTH) { /* 12 == header_length */ + /*If we don't have a frame we're current working on, complain */ + if(!list_empty(&(usbvision->inqueue))) { + if (!(*f)) { + (*f) = list_entry(usbvision->inqueue.next,struct usbvision_frame, frame); + } + usbvision_parse_data(usbvision); + } + else { + PDEBUG(DBG_IRQ, "received data, but no one needs it"); + scratch_reset(usbvision); + } + } + } + else { + PDEBUG(DBG_IRQ, "received data, but no one needs it"); + scratch_reset(usbvision); + } + + usbvision->timeInIrq += jiffies - startTime; + + for (i = 0; i < USBVISION_URB_FRAMES; i++) { + urb->iso_frame_desc[i].status = 0; + urb->iso_frame_desc[i].actual_length = 0; + } + + urb->status = 0; + urb->dev = usbvision->dev; + errCode = usb_submit_urb (urb, GFP_ATOMIC); + + /* Disable this warning. By design of the driver. */ + // if(errCode) { + // err("%s: usb_submit_urb failed: error %d", __FUNCTION__, errCode); + // } + + return; +} + +/*************************************/ +/* Low level usbvision access functions */ +/*************************************/ + +/* + * usbvision_read_reg() + * + * return < 0 -> Error + * >= 0 -> Data + */ + +int usbvision_read_reg(struct usb_usbvision *usbvision, unsigned char reg) +{ + int errCode = 0; + unsigned char buffer[1]; + + if (!USBVISION_IS_OPERATIONAL(usbvision)) + return -1; + + errCode = usb_control_msg(usbvision->dev, usb_rcvctrlpipe(usbvision->dev, 1), + USBVISION_OP_CODE, + USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_ENDPOINT, + 0, (__u16) reg, buffer, 1, HZ); + + if (errCode < 0) { + err("%s: failed: error %d", __FUNCTION__, errCode); + return errCode; + } + return buffer[0]; +} + +/* + * usbvision_write_reg() + * + * return 1 -> Reg written + * 0 -> usbvision is not yet ready + * -1 -> Something went wrong + */ + +int usbvision_write_reg(struct usb_usbvision *usbvision, unsigned char reg, + unsigned char value) +{ + int errCode = 0; + + if (!USBVISION_IS_OPERATIONAL(usbvision)) + return 0; + + errCode = usb_control_msg(usbvision->dev, usb_sndctrlpipe(usbvision->dev, 1), + USBVISION_OP_CODE, + USB_DIR_OUT | USB_TYPE_VENDOR | + USB_RECIP_ENDPOINT, 0, (__u16) reg, &value, 1, HZ); + + if (errCode < 0) { + err("%s: failed: error %d", __FUNCTION__, errCode); + } + return errCode; +} + + +static void usbvision_ctrlUrb_complete(struct urb *urb) +{ + struct usb_usbvision *usbvision = (struct usb_usbvision *)urb->context; + + PDEBUG(DBG_IRQ, ""); + usbvision->ctrlUrbBusy = 0; + if (waitqueue_active(&usbvision->ctrlUrb_wq)) { + wake_up_interruptible(&usbvision->ctrlUrb_wq); + } +} + + +static int usbvision_write_reg_irq(struct usb_usbvision *usbvision,int address, + unsigned char *data, int len) +{ + int errCode = 0; + + PDEBUG(DBG_IRQ, ""); + if (len > 8) { + return -EFAULT; + } +// down(&usbvision->ctrlUrbLock); + if (usbvision->ctrlUrbBusy) { +// up(&usbvision->ctrlUrbLock); + return -EBUSY; + } + usbvision->ctrlUrbBusy = 1; +// up(&usbvision->ctrlUrbLock); + + usbvision->ctrlUrbSetup.bRequestType = USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_ENDPOINT; + usbvision->ctrlUrbSetup.bRequest = USBVISION_OP_CODE; + usbvision->ctrlUrbSetup.wValue = 0; + usbvision->ctrlUrbSetup.wIndex = cpu_to_le16(address); + usbvision->ctrlUrbSetup.wLength = cpu_to_le16(len); + usb_fill_control_urb (usbvision->ctrlUrb, usbvision->dev, + usb_sndctrlpipe(usbvision->dev, 1), + (unsigned char *)&usbvision->ctrlUrbSetup, + (void *)usbvision->ctrlUrbBuffer, len, + usbvision_ctrlUrb_complete, + (void *)usbvision); + + memcpy(usbvision->ctrlUrbBuffer, data, len); + + errCode = usb_submit_urb(usbvision->ctrlUrb, GFP_ATOMIC); + if (errCode < 0) { + // error in usb_submit_urb() + usbvision->ctrlUrbBusy = 0; + } + PDEBUG(DBG_IRQ, "submit %d byte: error %d", len, errCode); + return errCode; +} + + +static int usbvision_init_compression(struct usb_usbvision *usbvision) +{ + int errCode = 0; + + usbvision->lastIsocFrameNum = -1; + usbvision->isocDataCount = 0; + usbvision->isocPacketCount = 0; + usbvision->isocSkipCount = 0; + usbvision->comprLevel = 50; + usbvision->lastComprLevel = -1; + usbvision->isocUrbCount = 0; + usbvision->requestIntra = 1; + usbvision->isocMeasureBandwidthCount = 0; + + return errCode; +} + +/* this function measures the used bandwidth since last call + * return: 0 : no error + * sets usedBandwidth to 1-100 : 1-100% of full bandwidth resp. to isocPacketSize + */ +static int usbvision_measure_bandwidth (struct usb_usbvision *usbvision) +{ + int errCode = 0; + + if (usbvision->isocMeasureBandwidthCount < 2) { // this gives an average bandwidth of 3 frames + usbvision->isocMeasureBandwidthCount++; + return errCode; + } + if ((usbvision->isocPacketSize > 0) && (usbvision->isocPacketCount > 0)) { + usbvision->usedBandwidth = usbvision->isocDataCount / + (usbvision->isocPacketCount + usbvision->isocSkipCount) * + 100 / usbvision->isocPacketSize; + } + usbvision->isocMeasureBandwidthCount = 0; + usbvision->isocDataCount = 0; + usbvision->isocPacketCount = 0; + usbvision->isocSkipCount = 0; + return errCode; +} + +static int usbvision_adjust_compression (struct usb_usbvision *usbvision) +{ + int errCode = 0; + unsigned char buffer[6]; + + PDEBUG(DBG_IRQ, ""); + if ((adjustCompression) && (usbvision->usedBandwidth > 0)) { + usbvision->comprLevel += (usbvision->usedBandwidth - 90) / 2; + RESTRICT_TO_RANGE(usbvision->comprLevel, 0, 100); + if (usbvision->comprLevel != usbvision->lastComprLevel) { + int distorsion; + if (usbvision->bridgeType == BRIDGE_NT1004 || usbvision->bridgeType == BRIDGE_NT1005) { + buffer[0] = (unsigned char)(4 + 16 * usbvision->comprLevel / 100); // PCM Threshold 1 + buffer[1] = (unsigned char)(4 + 8 * usbvision->comprLevel / 100); // PCM Threshold 2 + distorsion = 7 + 248 * usbvision->comprLevel / 100; + buffer[2] = (unsigned char)(distorsion & 0xFF); // Average distorsion Threshold (inter) + buffer[3] = (unsigned char)(distorsion & 0xFF); // Average distorsion Threshold (intra) + distorsion = 1 + 42 * usbvision->comprLevel / 100; + buffer[4] = (unsigned char)(distorsion & 0xFF); // Maximum distorsion Threshold (inter) + buffer[5] = (unsigned char)(distorsion & 0xFF); // Maximum distorsion Threshold (intra) + } + else { //BRIDGE_NT1003 + buffer[0] = (unsigned char)(4 + 16 * usbvision->comprLevel / 100); // PCM threshold 1 + buffer[1] = (unsigned char)(4 + 8 * usbvision->comprLevel / 100); // PCM threshold 2 + distorsion = 2 + 253 * usbvision->comprLevel / 100; + buffer[2] = (unsigned char)(distorsion & 0xFF); // distorsion threshold bit0-7 + buffer[3] = 0; //(unsigned char)((distorsion >> 8) & 0x0F); // distorsion threshold bit 8-11 + distorsion = 0 + 43 * usbvision->comprLevel / 100; + buffer[4] = (unsigned char)(distorsion & 0xFF); // maximum distorsion bit0-7 + buffer[5] = 0; //(unsigned char)((distorsion >> 8) & 0x01); // maximum distorsion bit 8 + } + errCode = usbvision_write_reg_irq(usbvision, USBVISION_PCM_THR1, buffer, 6); + if (errCode == 0){ + PDEBUG(DBG_IRQ, "new compr params %#02x %#02x %#02x %#02x %#02x %#02x", buffer[0], + buffer[1], buffer[2], buffer[3], buffer[4], buffer[5]); + usbvision->lastComprLevel = usbvision->comprLevel; + } + } + } + return errCode; +} + +static int usbvision_request_intra (struct usb_usbvision *usbvision) +{ + int errCode = 0; + unsigned char buffer[1]; + + PDEBUG(DBG_IRQ, ""); + usbvision->requestIntra = 1; + buffer[0] = 1; + usbvision_write_reg_irq(usbvision, USBVISION_FORCE_INTRA, buffer, 1); + return errCode; +} + +static int usbvision_unrequest_intra (struct usb_usbvision *usbvision) +{ + int errCode = 0; + unsigned char buffer[1]; + + PDEBUG(DBG_IRQ, ""); + usbvision->requestIntra = 0; + buffer[0] = 0; + usbvision_write_reg_irq(usbvision, USBVISION_FORCE_INTRA, buffer, 1); + return errCode; +} + +/******************************* + * usbvision utility functions + *******************************/ + +int usbvision_power_off(struct usb_usbvision *usbvision) +{ + int errCode = 0; + + PDEBUG(DBG_FUNC, ""); + + errCode = usbvision_write_reg(usbvision, USBVISION_PWR_REG, USBVISION_SSPND_EN); + if (errCode == 1) { + usbvision->power = 0; + } + PDEBUG(DBG_FUNC, "%s: errCode %d", (errCode!=1)?"ERROR":"power is off", errCode); + return errCode; +} + +/* + * usbvision_set_video_format() + * + */ +static int usbvision_set_video_format(struct usb_usbvision *usbvision, int format) +{ + static const char proc[] = "usbvision_set_video_format"; + int rc; + unsigned char value[2]; + + if (!USBVISION_IS_OPERATIONAL(usbvision)) + return 0; + + PDEBUG(DBG_FUNC, "isocMode %#02x", format); + + if ((format != ISOC_MODE_YUV422) + && (format != ISOC_MODE_YUV420) + && (format != ISOC_MODE_COMPRESS)) { + printk(KERN_ERR "usbvision: unknown video format %02x, using default YUV420", + format); + format = ISOC_MODE_YUV420; + } + value[0] = 0x0A; //TODO: See the effect of the filter + value[1] = format; + rc = usb_control_msg(usbvision->dev, usb_sndctrlpipe(usbvision->dev, 1), + USBVISION_OP_CODE, + USB_DIR_OUT | USB_TYPE_VENDOR | + USB_RECIP_ENDPOINT, 0, + (__u16) USBVISION_FILT_CONT, value, 2, HZ); + + if (rc < 0) { + printk(KERN_ERR "%s: ERROR=%d. USBVISION stopped - " + "reconnect or reload driver.\n", proc, rc); + } + usbvision->isocMode = format; + return rc; +} + +/* + * usbvision_set_output() + * + */ + +int usbvision_set_output(struct usb_usbvision *usbvision, int width, + int height) +{ + int errCode = 0; + int UsbWidth, UsbHeight; + unsigned int frameRate=0, frameDrop=0; + unsigned char value[4]; + + if (!USBVISION_IS_OPERATIONAL(usbvision)) { + return 0; + } + + if (width > MAX_USB_WIDTH) { + UsbWidth = width / 2; + usbvision->stretch_width = 2; + } + else { + UsbWidth = width; + usbvision->stretch_width = 1; + } + + if (height > MAX_USB_HEIGHT) { + UsbHeight = height / 2; + usbvision->stretch_height = 2; + } + else { + UsbHeight = height; + usbvision->stretch_height = 1; + } + + RESTRICT_TO_RANGE(UsbWidth, MIN_FRAME_WIDTH, MAX_USB_WIDTH); + UsbWidth &= ~(MIN_FRAME_WIDTH-1); + RESTRICT_TO_RANGE(UsbHeight, MIN_FRAME_HEIGHT, MAX_USB_HEIGHT); + UsbHeight &= ~(1); + + PDEBUG(DBG_FUNC, "usb %dx%d; screen %dx%d; stretch %dx%d", + UsbWidth, UsbHeight, width, height, + usbvision->stretch_width, usbvision->stretch_height); + + /* I'll not rewrite the same values */ + if ((UsbWidth != usbvision->curwidth) || (UsbHeight != usbvision->curheight)) { + value[0] = UsbWidth & 0xff; //LSB + value[1] = (UsbWidth >> 8) & 0x03; //MSB + value[2] = UsbHeight & 0xff; //LSB + value[3] = (UsbHeight >> 8) & 0x03; //MSB + + errCode = usb_control_msg(usbvision->dev, usb_sndctrlpipe(usbvision->dev, 1), + USBVISION_OP_CODE, + USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_ENDPOINT, + 0, (__u16) USBVISION_LXSIZE_O, value, 4, HZ); + + if (errCode < 0) { + err("%s failed: error %d", __FUNCTION__, errCode); + return errCode; + } + usbvision->curwidth = usbvision->stretch_width * UsbWidth; + usbvision->curheight = usbvision->stretch_height * UsbHeight; + } + + if (usbvision->isocMode == ISOC_MODE_YUV422) { + frameRate = (usbvision->isocPacketSize * 1000) / (UsbWidth * UsbHeight * 2); + } + else if (usbvision->isocMode == ISOC_MODE_YUV420) { + frameRate = (usbvision->isocPacketSize * 1000) / ((UsbWidth * UsbHeight * 12) / 8); + } + else { + frameRate = FRAMERATE_MAX; + } + + if (usbvision->tvnorm->id & V4L2_STD_625_50) { + frameDrop = frameRate * 32 / 25 - 1; + } + else if (usbvision->tvnorm->id & V4L2_STD_525_60) { + frameDrop = frameRate * 32 / 30 - 1; + } + + RESTRICT_TO_RANGE(frameDrop, FRAMERATE_MIN, FRAMERATE_MAX); + + PDEBUG(DBG_FUNC, "frameRate %d fps, frameDrop %d", frameRate, frameDrop); + + frameDrop = FRAMERATE_MAX; // We can allow the maximum here, because dropping is controlled + + /* frameDrop = 7; => framePhase = 1, 5, 9, 13, 17, 21, 25, 0, 4, 8, ... + => frameSkip = 4; + => frameRate = (7 + 1) * 25 / 32 = 200 / 32 = 6.25; + + frameDrop = 9; => framePhase = 1, 5, 8, 11, 14, 17, 21, 24, 27, 1, 4, 8, ... + => frameSkip = 4, 3, 3, 3, 3, 4, 3, 3, 3, 3, 4, ... + => frameRate = (9 + 1) * 25 / 32 = 250 / 32 = 7.8125; + */ + errCode = usbvision_write_reg(usbvision, USBVISION_FRM_RATE, frameDrop); + return errCode; +} + + +/* + * usbvision_frames_alloc + * allocate the maximum frames this driver can manage + */ +int usbvision_frames_alloc(struct usb_usbvision *usbvision) +{ + int i; + + /* Allocate memory for the frame buffers */ + usbvision->max_frame_size = MAX_FRAME_SIZE; + usbvision->fbuf_size = USBVISION_NUMFRAMES * usbvision->max_frame_size; + usbvision->fbuf = usbvision_rvmalloc(usbvision->fbuf_size); + + if(usbvision->fbuf == NULL) { + err("%s: unable to allocate %d bytes for fbuf ", + __FUNCTION__, usbvision->fbuf_size); + return -ENOMEM; + } + spin_lock_init(&usbvision->queue_lock); + init_waitqueue_head(&usbvision->wait_frame); + init_waitqueue_head(&usbvision->wait_stream); + + /* Allocate all buffers */ + for (i = 0; i < USBVISION_NUMFRAMES; i++) { + usbvision->frame[i].index = i; + usbvision->frame[i].grabstate = FrameState_Unused; + usbvision->frame[i].data = usbvision->fbuf + + i * usbvision->max_frame_size; + /* + * Set default sizes for read operation. + */ + usbvision->stretch_width = 1; + usbvision->stretch_height = 1; + usbvision->frame[i].width = usbvision->curwidth; + usbvision->frame[i].height = usbvision->curheight; + usbvision->frame[i].bytes_read = 0; + } + return 0; +} + +/* + * usbvision_frames_free + * frees memory allocated for the frames + */ +void usbvision_frames_free(struct usb_usbvision *usbvision) +{ + /* Have to free all that memory */ + if (usbvision->fbuf != NULL) { + usbvision_rvfree(usbvision->fbuf, usbvision->fbuf_size); + usbvision->fbuf = NULL; + } +} +/* + * usbvision_empty_framequeues() + * prepare queues for incoming and outgoing frames + */ +void usbvision_empty_framequeues(struct usb_usbvision *usbvision) +{ + u32 i; + + INIT_LIST_HEAD(&(usbvision->inqueue)); + INIT_LIST_HEAD(&(usbvision->outqueue)); + + for (i = 0; i < USBVISION_NUMFRAMES; i++) { + usbvision->frame[i].grabstate = FrameState_Unused; + usbvision->frame[i].bytes_read = 0; + } +} + +/* + * usbvision_stream_interrupt() + * stops streaming + */ +int usbvision_stream_interrupt(struct usb_usbvision *usbvision) +{ + int ret = 0; + + /* stop reading from the device */ + + usbvision->streaming = Stream_Interrupt; + ret = wait_event_timeout(usbvision->wait_stream, + (usbvision->streaming == Stream_Idle), + msecs_to_jiffies(USBVISION_NUMSBUF*USBVISION_URB_FRAMES)); + return ret; +} + +/* + * usbvision_set_compress_params() + * + */ + +static int usbvision_set_compress_params(struct usb_usbvision *usbvision) +{ + static const char proc[] = "usbvision_set_compresion_params: "; + int rc; + unsigned char value[6]; + + value[0] = 0x0F; // Intra-Compression cycle + value[1] = 0x01; // Reg.45 one line per strip + value[2] = 0x00; // Reg.46 Force intra mode on all new frames + value[3] = 0x00; // Reg.47 FORCE_UP <- 0 normal operation (not force) + value[4] = 0xA2; // Reg.48 BUF_THR I'm not sure if this does something in not compressed mode. + value[5] = 0x00; // Reg.49 DVI_YUV This has nothing to do with compression + + //catched values for NT1004 + // value[0] = 0xFF; // Never apply intra mode automatically + // value[1] = 0xF1; // Use full frame height for virtual strip width; One line per strip + // value[2] = 0x01; // Force intra mode on all new frames + // value[3] = 0x00; // Strip size 400 Bytes; do not force up + // value[4] = 0xA2; // + if (!USBVISION_IS_OPERATIONAL(usbvision)) + return 0; + + rc = usb_control_msg(usbvision->dev, usb_sndctrlpipe(usbvision->dev, 1), + USBVISION_OP_CODE, + USB_DIR_OUT | USB_TYPE_VENDOR | + USB_RECIP_ENDPOINT, 0, + (__u16) USBVISION_INTRA_CYC, value, 5, HZ); + + if (rc < 0) { + printk(KERN_ERR "%sERROR=%d. USBVISION stopped - " + "reconnect or reload driver.\n", proc, rc); + return rc; + } + + if (usbvision->bridgeType == BRIDGE_NT1004) { + value[0] = 20; // PCM Threshold 1 + value[1] = 12; // PCM Threshold 2 + value[2] = 255; // Distorsion Threshold inter + value[3] = 255; // Distorsion Threshold intra + value[4] = 43; // Max Distorsion inter + value[5] = 43; // Max Distorsion intra + } + else { + value[0] = 20; // PCM Threshold 1 + value[1] = 12; // PCM Threshold 2 + value[2] = 255; // Distorsion Threshold d7-d0 + value[3] = 0; // Distorsion Threshold d11-d8 + value[4] = 43; // Max Distorsion d7-d0 + value[5] = 0; // Max Distorsion d8 + } + + if (!USBVISION_IS_OPERATIONAL(usbvision)) + return 0; + + rc = usb_control_msg(usbvision->dev, usb_sndctrlpipe(usbvision->dev, 1), + USBVISION_OP_CODE, + USB_DIR_OUT | USB_TYPE_VENDOR | + USB_RECIP_ENDPOINT, 0, + (__u16) USBVISION_PCM_THR1, value, 6, HZ); + + if (rc < 0) { + printk(KERN_ERR "%sERROR=%d. USBVISION stopped - " + "reconnect or reload driver.\n", proc, rc); + return rc; + } + + + return rc; +} + + +/* + * usbvision_set_input() + * + * Set the input (saa711x, ...) size x y and other misc input params + * I've no idea if this parameters are right + * + */ +int usbvision_set_input(struct usb_usbvision *usbvision) +{ + static const char proc[] = "usbvision_set_input: "; + int rc; + unsigned char value[8]; + unsigned char dvi_yuv_value; + + if (!USBVISION_IS_OPERATIONAL(usbvision)) + return 0; + + /* Set input format expected from decoder*/ + if (usbvision_device_data[usbvision->DevModel].Vin_Reg1 >= 0) { + value[0] = usbvision_device_data[usbvision->DevModel].Vin_Reg1 & 0xff; + } else if(usbvision_device_data[usbvision->DevModel].Codec == CODEC_SAA7113) { + /* SAA7113 uses 8 bit output */ + value[0] = USBVISION_8_422_SYNC; + } else { + /* I'm sure only about d2-d0 [010] 16 bit 4:2:2 usin sync pulses + * as that is how saa7111 is configured */ + value[0] = USBVISION_16_422_SYNC; + /* | USBVISION_VSNC_POL | USBVISION_VCLK_POL);*/ + } + + rc = usbvision_write_reg(usbvision, USBVISION_VIN_REG1, value[0]); + if (rc < 0) { + printk(KERN_ERR "%sERROR=%d. USBVISION stopped - " + "reconnect or reload driver.\n", proc, rc); + return rc; + } + + + if (usbvision->tvnorm->id & V4L2_STD_PAL) { + value[0] = 0xC0; + value[1] = 0x02; //0x02C0 -> 704 Input video line length + value[2] = 0x20; + value[3] = 0x01; //0x0120 -> 288 Input video n. of lines + value[4] = 0x60; + value[5] = 0x00; //0x0060 -> 96 Input video h offset + value[6] = 0x16; + value[7] = 0x00; //0x0016 -> 22 Input video v offset + } else if (usbvision->tvnorm->id & V4L2_STD_SECAM) { + value[0] = 0xC0; + value[1] = 0x02; //0x02C0 -> 704 Input video line length + value[2] = 0x20; + value[3] = 0x01; //0x0120 -> 288 Input video n. of lines + value[4] = 0x01; + value[5] = 0x00; //0x0001 -> 01 Input video h offset + value[6] = 0x01; + value[7] = 0x00; //0x0001 -> 01 Input video v offset + } else { /* V4L2_STD_NTSC */ + value[0] = 0xD0; + value[1] = 0x02; //0x02D0 -> 720 Input video line length + value[2] = 0xF0; + value[3] = 0x00; //0x00F0 -> 240 Input video number of lines + value[4] = 0x50; + value[5] = 0x00; //0x0050 -> 80 Input video h offset + value[6] = 0x10; + value[7] = 0x00; //0x0010 -> 16 Input video v offset + } + + if (usbvision_device_data[usbvision->DevModel].X_Offset >= 0) { + value[4]=usbvision_device_data[usbvision->DevModel].X_Offset & 0xff; + value[5]=(usbvision_device_data[usbvision->DevModel].X_Offset & 0x0300) >> 8; + } + + if (usbvision_device_data[usbvision->DevModel].Y_Offset >= 0) { + value[6]=usbvision_device_data[usbvision->DevModel].Y_Offset & 0xff; + value[7]=(usbvision_device_data[usbvision->DevModel].Y_Offset & 0x0300) >> 8; + } + + rc = usb_control_msg(usbvision->dev, usb_sndctrlpipe(usbvision->dev, 1), + USBVISION_OP_CODE, /* USBVISION specific code */ + USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_ENDPOINT, 0, + (__u16) USBVISION_LXSIZE_I, value, 8, HZ); + if (rc < 0) { + printk(KERN_ERR "%sERROR=%d. USBVISION stopped - " + "reconnect or reload driver.\n", proc, rc); + return rc; + } + + + dvi_yuv_value = 0x00; /* U comes after V, Ya comes after U/V, Yb comes after Yb */ + + if(usbvision_device_data[usbvision->DevModel].Dvi_yuv >= 0){ + dvi_yuv_value = usbvision_device_data[usbvision->DevModel].Dvi_yuv & 0xff; + } + else if(usbvision_device_data[usbvision->DevModel].Codec == CODEC_SAA7113) { + /* This changes as the fine sync control changes. Further investigation necessary */ + dvi_yuv_value = 0x06; + } + + return (usbvision_write_reg(usbvision, USBVISION_DVI_YUV, dvi_yuv_value)); +} + + +/* + * usbvision_set_dram_settings() + * + * Set the buffer address needed by the usbvision dram to operate + * This values has been taken with usbsnoop. + * + */ + +static int usbvision_set_dram_settings(struct usb_usbvision *usbvision) +{ + int rc; + unsigned char value[8]; + + if (usbvision->isocMode == ISOC_MODE_COMPRESS) { + value[0] = 0x42; + value[1] = 0x71; + value[2] = 0xff; + value[3] = 0x00; + value[4] = 0x98; + value[5] = 0xe0; + value[6] = 0x71; + value[7] = 0xff; + // UR: 0x0E200-0x3FFFF = 204288 Words (1 Word = 2 Byte) + // FDL: 0x00000-0x0E099 = 57498 Words + // VDW: 0x0E3FF-0x3FFFF + } + else { + value[0] = 0x42; + value[1] = 0x00; + value[2] = 0xff; + value[3] = 0x00; + value[4] = 0x00; + value[5] = 0x00; + value[6] = 0x00; + value[7] = 0xff; + } + /* These are the values of the address of the video buffer, + * they have to be loaded into the USBVISION_DRM_PRM1-8 + * + * Start address of video output buffer for read: drm_prm1-2 -> 0x00000 + * End address of video output buffer for read: drm_prm1-3 -> 0x1ffff + * Start address of video frame delay buffer: drm_prm1-4 -> 0x20000 + * Only used in compressed mode + * End address of video frame delay buffer: drm_prm1-5-6 -> 0x3ffff + * Only used in compressed mode + * Start address of video output buffer for write: drm_prm1-7 -> 0x00000 + * End address of video output buffer for write: drm_prm1-8 -> 0x1ffff + */ + + if (!USBVISION_IS_OPERATIONAL(usbvision)) + return 0; + + rc = usb_control_msg(usbvision->dev, usb_sndctrlpipe(usbvision->dev, 1), + USBVISION_OP_CODE, /* USBVISION specific code */ + USB_DIR_OUT | USB_TYPE_VENDOR | + USB_RECIP_ENDPOINT, 0, + (__u16) USBVISION_DRM_PRM1, value, 8, HZ); + + if (rc < 0) { + err("%sERROR=%d", __FUNCTION__, rc); + return rc; + } + + /* Restart the video buffer logic */ + if ((rc = usbvision_write_reg(usbvision, USBVISION_DRM_CONT, USBVISION_RES_UR | + USBVISION_RES_FDL | USBVISION_RES_VDW)) < 0) + return rc; + rc = usbvision_write_reg(usbvision, USBVISION_DRM_CONT, 0x00); + + return rc; +} + +/* + * () + * + * Power on the device, enables suspend-resume logic + * & reset the isoc End-Point + * + */ + +int usbvision_power_on(struct usb_usbvision *usbvision) +{ + int errCode = 0; + + PDEBUG(DBG_FUNC, ""); + + usbvision_write_reg(usbvision, USBVISION_PWR_REG, USBVISION_SSPND_EN); + usbvision_write_reg(usbvision, USBVISION_PWR_REG, + USBVISION_SSPND_EN | USBVISION_RES2); + usbvision_write_reg(usbvision, USBVISION_PWR_REG, + USBVISION_SSPND_EN | USBVISION_PWR_VID); + errCode = usbvision_write_reg(usbvision, USBVISION_PWR_REG, + USBVISION_SSPND_EN | USBVISION_PWR_VID | USBVISION_RES2); + if (errCode == 1) { + usbvision->power = 1; + } + PDEBUG(DBG_FUNC, "%s: errCode %d", (errCode<0)?"ERROR":"power is on", errCode); + return errCode; +} + + +/* + * usbvision timer stuff + */ + +// to call usbvision_power_off from task queue +static void call_usbvision_power_off(struct work_struct *work) +{ + struct usb_usbvision *usbvision = container_of(work, struct usb_usbvision, powerOffWork); + + PDEBUG(DBG_FUNC, ""); + down_interruptible(&usbvision->lock); + if(usbvision->user == 0) { + usbvision_i2c_usb_del_bus(&usbvision->i2c_adap); + + usbvision_power_off(usbvision); + usbvision->initialized = 0; + } + up(&usbvision->lock); +} + +static void usbvision_powerOffTimer(unsigned long data) +{ + struct usb_usbvision *usbvision = (void *) data; + + PDEBUG(DBG_FUNC, ""); + del_timer(&usbvision->powerOffTimer); + INIT_WORK(&usbvision->powerOffWork, call_usbvision_power_off); + (void) schedule_work(&usbvision->powerOffWork); + +} + +void usbvision_init_powerOffTimer(struct usb_usbvision *usbvision) +{ + init_timer(&usbvision->powerOffTimer); + usbvision->powerOffTimer.data = (long) usbvision; + usbvision->powerOffTimer.function = usbvision_powerOffTimer; +} + +void usbvision_set_powerOffTimer(struct usb_usbvision *usbvision) +{ + mod_timer(&usbvision->powerOffTimer, jiffies + USBVISION_POWEROFF_TIME); +} + +void usbvision_reset_powerOffTimer(struct usb_usbvision *usbvision) +{ + if (timer_pending(&usbvision->powerOffTimer)) { + del_timer(&usbvision->powerOffTimer); + } +} + +/* + * usbvision_begin_streaming() + * Sure you have to put bit 7 to 0, if not incoming frames are droped, but no + * idea about the rest + */ +int usbvision_begin_streaming(struct usb_usbvision *usbvision) +{ + int errCode = 0; + + if (usbvision->isocMode == ISOC_MODE_COMPRESS) { + usbvision_init_compression(usbvision); + } + errCode = usbvision_write_reg(usbvision, USBVISION_VIN_REG2, USBVISION_NOHVALID | + usbvision->Vin_Reg2_Preset); + return errCode; +} + +/* + * usbvision_restart_isoc() + * Not sure yet if touching here PWR_REG make loose the config + */ + +int usbvision_restart_isoc(struct usb_usbvision *usbvision) +{ + int ret; + + if ( + (ret = + usbvision_write_reg(usbvision, USBVISION_PWR_REG, + USBVISION_SSPND_EN | USBVISION_PWR_VID)) < 0) + return ret; + if ( + (ret = + usbvision_write_reg(usbvision, USBVISION_PWR_REG, + USBVISION_SSPND_EN | USBVISION_PWR_VID | + USBVISION_RES2)) < 0) + return ret; + if ( + (ret = + usbvision_write_reg(usbvision, USBVISION_VIN_REG2, + USBVISION_KEEP_BLANK | USBVISION_NOHVALID | + usbvision->Vin_Reg2_Preset)) < 0) return ret; + + /* TODO: schedule timeout */ + while ((usbvision_read_reg(usbvision, USBVISION_STATUS_REG) && 0x01) != 1); + + return 0; +} + +int usbvision_audio_off(struct usb_usbvision *usbvision) +{ + if (usbvision_write_reg(usbvision, USBVISION_IOPIN_REG, USBVISION_AUDIO_MUTE) < 0) { + printk(KERN_ERR "usbvision_audio_off: can't wirte reg\n"); + return -1; + } + usbvision->AudioMute = 0; + usbvision->AudioChannel = USBVISION_AUDIO_MUTE; + return 0; +} + +int usbvision_set_audio(struct usb_usbvision *usbvision, int AudioChannel) +{ + if (!usbvision->AudioMute) { + if (usbvision_write_reg(usbvision, USBVISION_IOPIN_REG, AudioChannel) < 0) { + printk(KERN_ERR "usbvision_set_audio: can't write iopin register for audio switching\n"); + return -1; + } + } + usbvision->AudioChannel = AudioChannel; + return 0; +} + +int usbvision_setup(struct usb_usbvision *usbvision,int format) +{ + usbvision_set_video_format(usbvision, format); + usbvision_set_dram_settings(usbvision); + usbvision_set_compress_params(usbvision); + usbvision_set_input(usbvision); + usbvision_set_output(usbvision, MAX_USB_WIDTH, MAX_USB_HEIGHT); + usbvision_restart_isoc(usbvision); + + /* cosas del PCM */ + return USBVISION_IS_OPERATIONAL(usbvision); +} + + +int usbvision_sbuf_alloc(struct usb_usbvision *usbvision) +{ + int i, errCode = 0; + const int sb_size = USBVISION_URB_FRAMES * USBVISION_MAX_ISOC_PACKET_SIZE; + + /* Clean pointers so we know if we allocated something */ + for (i = 0; i < USBVISION_NUMSBUF; i++) + usbvision->sbuf[i].data = NULL; + + for (i = 0; i < USBVISION_NUMSBUF; i++) { + usbvision->sbuf[i].data = kzalloc(sb_size, GFP_KERNEL); + if (usbvision->sbuf[i].data == NULL) { + err("%s: unable to allocate %d bytes for sbuf", __FUNCTION__, sb_size); + errCode = -ENOMEM; + break; + } + } + return errCode; +} + + +void usbvision_sbuf_free(struct usb_usbvision *usbvision) +{ + int i; + + for (i = 0; i < USBVISION_NUMSBUF; i++) { + if (usbvision->sbuf[i].data != NULL) { + kfree(usbvision->sbuf[i].data); + usbvision->sbuf[i].data = NULL; + } + } +} + +/* + * usbvision_init_isoc() + * + */ +int usbvision_init_isoc(struct usb_usbvision *usbvision) +{ + struct usb_device *dev = usbvision->dev; + int bufIdx, errCode, regValue; + + if (!USBVISION_IS_OPERATIONAL(usbvision)) + return -EFAULT; + + usbvision->curFrame = NULL; + scratch_reset(usbvision); + + /* Alternate interface 1 is is the biggest frame size */ + errCode = usb_set_interface(dev, usbvision->iface, usbvision->ifaceAltActive); + if (errCode < 0) { + usbvision->last_error = errCode; + return -EBUSY; + } + + regValue = (16 - usbvision_read_reg(usbvision, USBVISION_ALTER_REG)) & 0x0F; + usbvision->isocPacketSize = (regValue == 0) ? 0 : (regValue * 64) - 1; + PDEBUG(DBG_ISOC, "ISO Packet Length:%d", usbvision->isocPacketSize); + + usbvision->usb_bandwidth = regValue >> 1; + PDEBUG(DBG_ISOC, "USB Bandwidth Usage: %dMbit/Sec", usbvision->usb_bandwidth); + + + + /* We double buffer the Iso lists */ + + for (bufIdx = 0; bufIdx < USBVISION_NUMSBUF; bufIdx++) { + int j, k; + struct urb *urb; + + urb = usb_alloc_urb(USBVISION_URB_FRAMES, GFP_KERNEL); + if (urb == NULL) { + err("%s: usb_alloc_urb() failed", __FUNCTION__); + return -ENOMEM; + } + usbvision->sbuf[bufIdx].urb = urb; + urb->dev = dev; + urb->context = usbvision; + urb->pipe = usb_rcvisocpipe(dev, usbvision->video_endp); + urb->transfer_flags = URB_ISO_ASAP; + urb->interval = 1; + urb->transfer_buffer = usbvision->sbuf[bufIdx].data; + urb->complete = usbvision_isocIrq; + urb->number_of_packets = USBVISION_URB_FRAMES; + urb->transfer_buffer_length = + usbvision->isocPacketSize * USBVISION_URB_FRAMES; + for (j = k = 0; j < USBVISION_URB_FRAMES; j++, + k += usbvision->isocPacketSize) { + urb->iso_frame_desc[j].offset = k; + urb->iso_frame_desc[j].length = usbvision->isocPacketSize; + } + } + + + /* Submit all URBs */ + for (bufIdx = 0; bufIdx < USBVISION_NUMSBUF; bufIdx++) { + errCode = usb_submit_urb(usbvision->sbuf[bufIdx].urb, GFP_KERNEL); + if (errCode) { + err("%s: usb_submit_urb(%d) failed: error %d", __FUNCTION__, bufIdx, errCode); + } + } + + usbvision->streaming = Stream_Idle; + PDEBUG(DBG_ISOC, "%s: streaming=1 usbvision->video_endp=$%02x", __FUNCTION__, usbvision->video_endp); + return 0; +} + +/* + * usbvision_stop_isoc() + * + * This procedure stops streaming and deallocates URBs. Then it + * activates zero-bandwidth alt. setting of the video interface. + * + */ +void usbvision_stop_isoc(struct usb_usbvision *usbvision) +{ + int bufIdx, errCode, regValue; + + if ((usbvision->streaming == Stream_Off) || (usbvision->dev == NULL)) + return; + + /* Unschedule all of the iso td's */ + for (bufIdx = 0; bufIdx < USBVISION_NUMSBUF; bufIdx++) { + usb_kill_urb(usbvision->sbuf[bufIdx].urb); + usb_free_urb(usbvision->sbuf[bufIdx].urb); + usbvision->sbuf[bufIdx].urb = NULL; + } + + + PDEBUG(DBG_ISOC, "%s: streaming=Stream_Off\n", __FUNCTION__); + usbvision->streaming = Stream_Off; + + if (!usbvision->remove_pending) { + + /* Set packet size to 0 */ + errCode = usb_set_interface(usbvision->dev, usbvision->iface, + usbvision->ifaceAltInactive); + if (errCode < 0) { + err("%s: usb_set_interface() failed: error %d", __FUNCTION__, errCode); + usbvision->last_error = errCode; + } + regValue = (16 - usbvision_read_reg(usbvision, USBVISION_ALTER_REG)) & 0x0F; + usbvision->isocPacketSize = (regValue == 0) ? 0 : (regValue * 64) - 1; + PDEBUG(DBG_ISOC, "ISO Packet Length:%d", usbvision->isocPacketSize); + + usbvision->usb_bandwidth = regValue >> 1; + PDEBUG(DBG_ISOC, "USB Bandwidth Usage: %dMbit/Sec", usbvision->usb_bandwidth); + } +} + +int usbvision_muxsel(struct usb_usbvision *usbvision, int channel) +{ + int mode[4]; + int audio[]= {1, 0, 0, 0}; + struct v4l2_routing route; + //channel 0 is TV with audiochannel 1 (tuner mono) + //channel 1 is Composite with audio channel 0 (line in) + //channel 2 is S-Video with audio channel 0 (line in) + //channel 3 is additional video inputs to the device with audio channel 0 (line in) + + RESTRICT_TO_RANGE(channel, 0, usbvision->video_inputs); + usbvision->ctl_input = channel; + route.input = SAA7115_COMPOSITE1; + call_i2c_clients(usbvision, VIDIOC_INT_S_VIDEO_ROUTING,&route); + call_i2c_clients(usbvision, VIDIOC_S_INPUT, &usbvision->ctl_input); + + // set the new channel + // Regular USB TV Tuners -> channel: 0 = Television, 1 = Composite, 2 = S-Video + // Four video input devices -> channel: 0 = Chan White, 1 = Chan Green, 2 = Chan Yellow, 3 = Chan Red + + switch (usbvision_device_data[usbvision->DevModel].Codec) { + case CODEC_SAA7113: + if (SwitchSVideoInput) { // To handle problems with S-Video Input for some devices. Use SwitchSVideoInput parameter when loading the module. + mode[2] = 1; + } + else { + mode[2] = 7; + } + if (usbvision_device_data[usbvision->DevModel].VideoChannels == 4) { + mode[0] = 0; mode[1] = 2; mode[3] = 3; // Special for four input devices + } + else { + mode[0] = 0; mode[1] = 2; //modes for regular saa7113 devices + } + break; + case CODEC_SAA7111: + mode[0] = 0; mode[1] = 1; mode[2] = 7; //modes for saa7111 + break; + default: + mode[0] = 0; mode[1] = 1; mode[2] = 7; //default modes + } + route.input = mode[channel]; + call_i2c_clients(usbvision, VIDIOC_INT_S_VIDEO_ROUTING,&route); + usbvision->channel = channel; + usbvision_set_audio(usbvision, audio[channel]); + return 0; +} + +/* + * Overrides for Emacs so that we follow Linus's tabbing style. + * --------------------------------------------------------------------------- + * Local variables: + * c-basic-offset: 8 + * End: + */ diff --git a/drivers/media/video/usbvision/usbvision-i2c.c b/drivers/media/video/usbvision/usbvision-i2c.c new file mode 100644 index 00000000000..0f3fba7ea6f --- /dev/null +++ b/drivers/media/video/usbvision/usbvision-i2c.c @@ -0,0 +1,571 @@ +/* + * I2C_ALGO_USB.C + * i2c algorithm for USB-I2C Bridges + * + * Copyright (c) 1999-2005 Joerg Heckenbach <joerg@heckenbach-aw.de> + * Dwaine Garden <dwainegarden@rogers.com> + * + * This module is part of usbvision driver project. + * Updates to driver completed by Dwaine P. Garden + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/delay.h> +#include <linux/slab.h> +#include <linux/version.h> +#include <linux/utsname.h> +#include <linux/init.h> +#include <asm/uaccess.h> +#include <linux/ioport.h> +#include <linux/errno.h> +#include <linux/sched.h> +#include <linux/usb.h> +#include <linux/i2c.h> +#include "usbvision.h" + +#define DBG_I2C 1<<0 +#define DBG_ALGO 1<<1 + +static int i2c_debug = 0; + +module_param (i2c_debug, int, 0644); // debug_i2c_usb mode of the device driver +MODULE_PARM_DESC(i2c_debug, "enable debug messages [i2c]"); + +#define PDEBUG(level, fmt, args...) \ + if (i2c_debug & (level)) info("[%s:%d] " fmt, __PRETTY_FUNCTION__, __LINE__ , ## args) + +static int usbvision_i2c_write(void *data, unsigned char addr, char *buf, + short len); +static int usbvision_i2c_read(void *data, unsigned char addr, char *buf, + short len); + +static inline int try_write_address(struct i2c_adapter *i2c_adap, + unsigned char addr, int retries) +{ + struct i2c_algo_usb_data *adap = i2c_adap->algo_data; + void *data; + int i, ret = -1; + char buf[4]; + + data = i2c_get_adapdata(i2c_adap); + buf[0] = 0x00; + for (i = 0; i <= retries; i++) { + ret = (usbvision_i2c_write(data, addr, buf, 1)); + if (ret == 1) + break; /* success! */ + udelay(5 /*adap->udelay */ ); + if (i == retries) /* no success */ + break; + udelay(adap->udelay); + } + if (i) { + PDEBUG(DBG_ALGO,"Needed %d retries for address %#2x", i, addr); + PDEBUG(DBG_ALGO,"Maybe there's no device at this address"); + } + return ret; +} + +static inline int try_read_address(struct i2c_adapter *i2c_adap, + unsigned char addr, int retries) +{ + struct i2c_algo_usb_data *adap = i2c_adap->algo_data; + void *data; + int i, ret = -1; + char buf[4]; + + data = i2c_get_adapdata(i2c_adap); + for (i = 0; i <= retries; i++) { + ret = (usbvision_i2c_read(data, addr, buf, 1)); + if (ret == 1) + break; /* success! */ + udelay(5 /*adap->udelay */ ); + if (i == retries) /* no success */ + break; + udelay(adap->udelay); + } + if (i) { + PDEBUG(DBG_ALGO,"Needed %d retries for address %#2x", i, addr); + PDEBUG(DBG_ALGO,"Maybe there's no device at this address"); + } + return ret; +} + +static inline int usb_find_address(struct i2c_adapter *i2c_adap, + struct i2c_msg *msg, int retries, + unsigned char *add) +{ + unsigned short flags = msg->flags; + + unsigned char addr; + int ret; + if ((flags & I2C_M_TEN)) { + /* a ten bit address */ + addr = 0xf0 | ((msg->addr >> 7) & 0x03); + /* try extended address code... */ + ret = try_write_address(i2c_adap, addr, retries); + if (ret != 1) { + err("died at extended address code, while writing"); + return -EREMOTEIO; + } + add[0] = addr; + if (flags & I2C_M_RD) { + /* okay, now switch into reading mode */ + addr |= 0x01; + ret = try_read_address(i2c_adap, addr, retries); + if (ret != 1) { + err("died at extended address code, while reading"); + return -EREMOTEIO; + } + } + + } else { /* normal 7bit address */ + addr = (msg->addr << 1); + if (flags & I2C_M_RD) + addr |= 1; + if (flags & I2C_M_REV_DIR_ADDR) + addr ^= 1; + + add[0] = addr; + if (flags & I2C_M_RD) + ret = try_read_address(i2c_adap, addr, retries); + else + ret = try_write_address(i2c_adap, addr, retries); + + if (ret != 1) { + return -EREMOTEIO; + } + } + return 0; +} + +static int +usb_xfer(struct i2c_adapter *i2c_adap, struct i2c_msg msgs[], int num) +{ + struct i2c_msg *pmsg; + void *data; + int i, ret; + unsigned char addr; + + data = i2c_get_adapdata(i2c_adap); + + for (i = 0; i < num; i++) { + pmsg = &msgs[i]; + ret = usb_find_address(i2c_adap, pmsg, i2c_adap->retries, &addr); + if (ret != 0) { + PDEBUG(DBG_ALGO,"got NAK from device, message #%d", i); + return (ret < 0) ? ret : -EREMOTEIO; + } + + if (pmsg->flags & I2C_M_RD) { + /* read bytes into buffer */ + ret = (usbvision_i2c_read(data, addr, pmsg->buf, pmsg->len)); + if (ret < pmsg->len) { + return (ret < 0) ? ret : -EREMOTEIO; + } + } else { + /* write bytes from buffer */ + ret = (usbvision_i2c_write(data, addr, pmsg->buf, pmsg->len)); + if (ret < pmsg->len) { + return (ret < 0) ? ret : -EREMOTEIO; + } + } + } + return num; +} + +static int algo_control(struct i2c_adapter *adapter, unsigned int cmd, unsigned long arg) +{ + return 0; +} + +static u32 usb_func(struct i2c_adapter *adap) +{ + return I2C_FUNC_SMBUS_EMUL | I2C_FUNC_10BIT_ADDR | I2C_FUNC_PROTOCOL_MANGLING; +} + + +/* -----exported algorithm data: ------------------------------------- */ + +static struct i2c_algorithm i2c_usb_algo = { + .master_xfer = usb_xfer, + .smbus_xfer = NULL, + .algo_control = algo_control, + .functionality = usb_func, +}; + + +/* + * registering functions to load algorithms at runtime + */ +int usbvision_i2c_usb_add_bus(struct i2c_adapter *adap) +{ + PDEBUG(DBG_I2C, "I2C debugging is enabled [i2c]"); + PDEBUG(DBG_ALGO, "ALGO debugging is enabled [i2c]"); + + /* register new adapter to i2c module... */ + + adap->algo = &i2c_usb_algo; + + adap->timeout = 100; /* default values, should */ + adap->retries = 3; /* be replaced by defines */ + + i2c_add_adapter(adap); + + PDEBUG(DBG_ALGO,"i2c bus for %s registered", adap->name); + + return 0; +} + + +int usbvision_i2c_usb_del_bus(struct i2c_adapter *adap) +{ + + i2c_del_adapter(adap); + + PDEBUG(DBG_ALGO,"i2c bus for %s unregistered", adap->name); + + return 0; +} + + +/* ----------------------------------------------------------------------- */ +/* usbvision specific I2C functions */ +/* ----------------------------------------------------------------------- */ +static struct i2c_adapter i2c_adap_template; +static struct i2c_algo_usb_data i2c_algo_template; +static struct i2c_client i2c_client_template; + +int usbvision_init_i2c(struct usb_usbvision *usbvision) +{ + memcpy(&usbvision->i2c_adap, &i2c_adap_template, + sizeof(struct i2c_adapter)); + memcpy(&usbvision->i2c_algo, &i2c_algo_template, + sizeof(struct i2c_algo_usb_data)); + memcpy(&usbvision->i2c_client, &i2c_client_template, + sizeof(struct i2c_client)); + + sprintf(usbvision->i2c_adap.name + strlen(usbvision->i2c_adap.name), + " #%d", usbvision->vdev->minor & 0x1f); + PDEBUG(DBG_I2C,"Adaptername: %s", usbvision->i2c_adap.name); + + i2c_set_adapdata(&usbvision->i2c_adap, usbvision); + i2c_set_clientdata(&usbvision->i2c_client, usbvision); + i2c_set_algo_usb_data(&usbvision->i2c_algo, usbvision); + + usbvision->i2c_adap.algo_data = &usbvision->i2c_algo; + usbvision->i2c_client.adapter = &usbvision->i2c_adap; + + if (usbvision_write_reg(usbvision, USBVISION_SER_MODE, USBVISION_IIC_LRNACK) < 0) { + printk(KERN_ERR "usbvision_init_i2c: can't write reg\n"); + return -EBUSY; + } + +#ifdef CONFIG_MODULES + /* Request the load of the i2c modules we need */ + switch (usbvision_device_data[usbvision->DevModel].Codec) { + case CODEC_SAA7113: + request_module("saa7115"); + break; + case CODEC_SAA7111: + request_module("saa7115"); + break; + } + if (usbvision_device_data[usbvision->DevModel].Tuner == 1) { + request_module("tuner"); + } +#endif + + return usbvision_i2c_usb_add_bus(&usbvision->i2c_adap); +} + +void call_i2c_clients(struct usb_usbvision *usbvision, unsigned int cmd, + void *arg) +{ + BUG_ON(NULL == usbvision->i2c_adap.algo_data); + i2c_clients_command(&usbvision->i2c_adap, cmd, arg); +} + +static int attach_inform(struct i2c_client *client) +{ + struct usb_usbvision *usbvision; + + usbvision = (struct usb_usbvision *)i2c_get_adapdata(client->adapter); + + switch (client->addr << 1) { + case 0x43: + case 0x4b: + { + struct tuner_setup tun_setup; + + tun_setup.mode_mask = T_ANALOG_TV | T_RADIO; + tun_setup.type = TUNER_TDA9887; + tun_setup.addr = client->addr; + + call_i2c_clients(usbvision, TUNER_SET_TYPE_ADDR, &tun_setup); + + break; + } + case 0x42: + PDEBUG(DBG_I2C,"attach_inform: saa7114 detected."); + break; + case 0x4a: + PDEBUG(DBG_I2C,"attach_inform: saa7113 detected."); + break; + case 0xa0: + PDEBUG(DBG_I2C,"attach_inform: eeprom detected."); + break; + + default: + { + struct tuner_setup tun_setup; + + PDEBUG(DBG_I2C,"attach inform: detected I2C address %x", client->addr << 1); + usbvision->tuner_addr = client->addr; + + if ((usbvision->have_tuner) && (usbvision->tuner_type != -1)) { + tun_setup.mode_mask = T_ANALOG_TV | T_RADIO; + tun_setup.type = usbvision->tuner_type; + tun_setup.addr = usbvision->tuner_addr; + call_i2c_clients(usbvision, TUNER_SET_TYPE_ADDR, &tun_setup); + } + } + break; + } + return 0; +} + +static int detach_inform(struct i2c_client *client) +{ + struct usb_usbvision *usbvision; + + usbvision = (struct usb_usbvision *)i2c_get_adapdata(client->adapter); + + PDEBUG(DBG_I2C,"usbvision[%d] detaches %s", usbvision->nr, client->name); + return 0; +} + +static int +usbvision_i2c_read_max4(struct usb_usbvision *usbvision, unsigned char addr, + char *buf, short len) +{ + int rc, retries; + + for (retries = 5;;) { + rc = usbvision_write_reg(usbvision, USBVISION_SER_ADRS, addr); + if (rc < 0) + return rc; + + /* Initiate byte read cycle */ + /* USBVISION_SER_CONT <- d0-d2 n. of bytes to r/w */ + /* d3 0=Wr 1=Rd */ + rc = usbvision_write_reg(usbvision, USBVISION_SER_CONT, + (len & 0x07) | 0x18); + if (rc < 0) + return rc; + + /* Test for Busy and ACK */ + do { + /* USBVISION_SER_CONT -> d4 == 0 busy */ + rc = usbvision_read_reg(usbvision, USBVISION_SER_CONT); + } while (rc > 0 && ((rc & 0x10) != 0)); /* Retry while busy */ + if (rc < 0) + return rc; + + /* USBVISION_SER_CONT -> d5 == 1 Not ack */ + if ((rc & 0x20) == 0) /* Ack? */ + break; + + /* I2C abort */ + rc = usbvision_write_reg(usbvision, USBVISION_SER_CONT, 0x00); + if (rc < 0) + return rc; + + if (--retries < 0) + return -1; + } + + switch (len) { + case 4: + buf[3] = usbvision_read_reg(usbvision, USBVISION_SER_DAT4); + case 3: + buf[2] = usbvision_read_reg(usbvision, USBVISION_SER_DAT3); + case 2: + buf[1] = usbvision_read_reg(usbvision, USBVISION_SER_DAT2); + case 1: + buf[0] = usbvision_read_reg(usbvision, USBVISION_SER_DAT1); + break; + default: + printk(KERN_ERR + "usbvision_i2c_read_max4: buffer length > 4\n"); + } + + if (i2c_debug & DBG_I2C) { + int idx; + for (idx = 0; idx < len; idx++) { + PDEBUG(DBG_I2C,"read %x from address %x", (unsigned char)buf[idx], addr); + } + } + return len; +} + + +static int usbvision_i2c_write_max4(struct usb_usbvision *usbvision, + unsigned char addr, const char *buf, + short len) +{ + int rc, retries; + int i; + unsigned char value[6]; + unsigned char ser_cont; + + ser_cont = (len & 0x07) | 0x10; + + value[0] = addr; + value[1] = ser_cont; + for (i = 0; i < len; i++) + value[i + 2] = buf[i]; + + for (retries = 5;;) { + rc = usb_control_msg(usbvision->dev, + usb_sndctrlpipe(usbvision->dev, 1), + USBVISION_OP_CODE, + USB_DIR_OUT | USB_TYPE_VENDOR | + USB_RECIP_ENDPOINT, 0, + (__u16) USBVISION_SER_ADRS, value, + len + 2, HZ); + + if (rc < 0) + return rc; + + rc = usbvision_write_reg(usbvision, USBVISION_SER_CONT, + (len & 0x07) | 0x10); + if (rc < 0) + return rc; + + /* Test for Busy and ACK */ + do { + rc = usbvision_read_reg(usbvision, USBVISION_SER_CONT); + } while (rc > 0 && ((rc & 0x10) != 0)); /* Retry while busy */ + if (rc < 0) + return rc; + + if ((rc & 0x20) == 0) /* Ack? */ + break; + + /* I2C abort */ + usbvision_write_reg(usbvision, USBVISION_SER_CONT, 0x00); + + if (--retries < 0) + return -1; + + } + + if (i2c_debug & DBG_I2C) { + int idx; + for (idx = 0; idx < len; idx++) { + PDEBUG(DBG_I2C,"wrote %x at address %x", (unsigned char)buf[idx], addr); + } + } + return len; +} + +static int usbvision_i2c_write(void *data, unsigned char addr, char *buf, + short len) +{ + char *bufPtr = buf; + int retval; + int wrcount = 0; + int count; + int maxLen = 4; + struct usb_usbvision *usbvision = (struct usb_usbvision *) data; + + while (len > 0) { + count = (len > maxLen) ? maxLen : len; + retval = usbvision_i2c_write_max4(usbvision, addr, bufPtr, count); + if (retval > 0) { + len -= count; + bufPtr += count; + wrcount += count; + } else + return (retval < 0) ? retval : -EFAULT; + } + return wrcount; +} + +static int usbvision_i2c_read(void *data, unsigned char addr, char *buf, + short len) +{ + char temp[4]; + int retval, i; + int rdcount = 0; + int count; + struct usb_usbvision *usbvision = (struct usb_usbvision *) data; + + while (len > 0) { + count = (len > 3) ? 4 : len; + retval = usbvision_i2c_read_max4(usbvision, addr, temp, count); + if (retval > 0) { + for (i = 0; i < len; i++) + buf[rdcount + i] = temp[i]; + len -= count; + rdcount += count; + } else + return (retval < 0) ? retval : -EFAULT; + } + return rdcount; +} + +static struct i2c_algo_usb_data i2c_algo_template = { + .data = NULL, + .inb = usbvision_i2c_read, + .outb = usbvision_i2c_write, + .udelay = 10, + .mdelay = 10, + .timeout = 100, +}; + +static struct i2c_adapter i2c_adap_template = { + .owner = THIS_MODULE, + .name = "usbvision", + .id = I2C_HW_B_BT848, /* FIXME */ + .algo = NULL, + .algo_data = NULL, + .client_register = attach_inform, + .client_unregister = detach_inform, +#ifdef I2C_ADAP_CLASS_TV_ANALOG + .class = I2C_ADAP_CLASS_TV_ANALOG, +#else + .class = I2C_CLASS_TV_ANALOG, +#endif +}; + +static struct i2c_client i2c_client_template = { + .name = "usbvision internal", +}; + +EXPORT_SYMBOL(usbvision_i2c_usb_add_bus); +EXPORT_SYMBOL(usbvision_i2c_usb_del_bus); + +/* + * Overrides for Emacs so that we follow Linus's tabbing style. + * --------------------------------------------------------------------------- + * Local variables: + * c-basic-offset: 8 + * End: + */ diff --git a/drivers/media/video/usbvision/usbvision-video.c b/drivers/media/video/usbvision/usbvision-video.c new file mode 100644 index 00000000000..864446c012e --- /dev/null +++ b/drivers/media/video/usbvision/usbvision-video.c @@ -0,0 +1,2051 @@ +/* + * USB USBVISION Video device driver 0.9.9 + * + * + * + * Copyright (c) 1999-2005 Joerg Heckenbach <joerg@heckenbach-aw.de> + * + * This module is part of usbvision driver project. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + * + * Let's call the version 0.... until compression decoding is completely + * implemented. + * + * This driver is written by Jose Ignacio Gijon and Joerg Heckenbach. + * It was based on USB CPiA driver written by Peter Pregler, + * Scott J. Bertin and Johannes Erdfelt + * Ideas are taken from bttv driver by Ralph Metzler, Marcus Metzler & + * Gerd Knorr and zoran 36120/36125 driver by Pauline Middelink + * Updates to driver completed by Dwaine P. Garden + * + * + * TODO: + * - use submit_urb for all setup packets + * - Fix memory settings for nt1004. It is 4 times as big as the + * nt1003 memory. + * - Add audio on endpoint 3 for nt1004 chip. Seems impossible, needs a codec interface. Which one? + * - Clean up the driver. + * - optimization for performance. + * - Add Videotext capability (VBI). Working on it..... + * - Check audio for other devices + * + */ + +#include <linux/version.h> +#include <linux/kernel.h> +#include <linux/sched.h> +#include <linux/list.h> +#include <linux/timer.h> +#include <linux/slab.h> +#include <linux/mm.h> +#include <linux/utsname.h> +#include <linux/highmem.h> +#include <linux/smp_lock.h> +#include <linux/videodev.h> +#include <linux/vmalloc.h> +#include <linux/module.h> +#include <linux/init.h> +#include <linux/spinlock.h> +#include <asm/io.h> +#include <linux/videodev2.h> +#include <linux/video_decoder.h> +#include <linux/i2c.h> + +#include <media/saa7115.h> +#include <media/v4l2-common.h> +#include <media/tuner.h> +#include <media/audiochip.h> + +#include <linux/moduleparam.h> +#include <linux/workqueue.h> + +#ifdef CONFIG_KMOD +#include <linux/kmod.h> +#endif + +#include "usbvision.h" + +#define DRIVER_AUTHOR "Joerg Heckenbach <joerg@heckenbach-aw.de>, Dwaine Garden <DwaineGarden@rogers.com>" +#define DRIVER_NAME "usbvision" +#define DRIVER_ALIAS "USBVision" +#define DRIVER_DESC "USBVision USB Video Device Driver for Linux" +#define DRIVER_LICENSE "GPL" +#define USBVISION_DRIVER_VERSION_MAJOR 0 +#define USBVISION_DRIVER_VERSION_MINOR 9 +#define USBVISION_DRIVER_VERSION_PATCHLEVEL 9 +#define USBVISION_DRIVER_VERSION KERNEL_VERSION(USBVISION_DRIVER_VERSION_MAJOR,USBVISION_DRIVER_VERSION_MINOR,USBVISION_DRIVER_VERSION_PATCHLEVEL) +#define USBVISION_VERSION_STRING __stringify(USBVISION_DRIVER_VERSION_MAJOR) "." __stringify(USBVISION_DRIVER_VERSION_MINOR) "." __stringify(USBVISION_DRIVER_VERSION_PATCHLEVEL) + +#define ENABLE_HEXDUMP 0 /* Enable if you need it */ + + +#ifdef USBVISION_DEBUG + #define PDEBUG(level, fmt, args...) \ + if (video_debug & (level)) info("[%s:%d] " fmt, __PRETTY_FUNCTION__, __LINE__ , ## args) +#else + #define PDEBUG(level, fmt, args...) do {} while(0) +#endif + +#define DBG_IOCTL 1<<0 +#define DBG_IO 1<<1 +#define DBG_PROBE 1<<2 +#define DBG_MMAP 1<<3 + +//String operations +#define rmspace(str) while(*str==' ') str++; +#define goto2next(str) while(*str!=' ') str++; while(*str==' ') str++; + + +static int usbvision_nr = 0; // sequential number of usbvision device + +static struct usbvision_v4l2_format_st usbvision_v4l2_format[] = { + { 1, 1, 8, V4L2_PIX_FMT_GREY , "GREY" }, + { 1, 2, 16, V4L2_PIX_FMT_RGB565 , "RGB565" }, + { 1, 3, 24, V4L2_PIX_FMT_RGB24 , "RGB24" }, + { 1, 4, 32, V4L2_PIX_FMT_RGB32 , "RGB32" }, + { 1, 2, 16, V4L2_PIX_FMT_RGB555 , "RGB555" }, + { 1, 2, 16, V4L2_PIX_FMT_YUYV , "YUV422" }, + { 1, 2, 12, V4L2_PIX_FMT_YVU420 , "YUV420P" }, // 1.5 ! + { 1, 2, 16, V4L2_PIX_FMT_YUV422P , "YUV422P" } +}; + +/* supported tv norms */ +static struct usbvision_tvnorm tvnorms[] = { + { + .name = "PAL", + .id = V4L2_STD_PAL, + }, { + .name = "NTSC", + .id = V4L2_STD_NTSC, + }, { + .name = "SECAM", + .id = V4L2_STD_SECAM, + }, { + .name = "PAL-M", + .id = V4L2_STD_PAL_M, + } +}; + +#define TVNORMS ARRAY_SIZE(tvnorms) + +// Function prototypes +static void usbvision_release(struct usb_usbvision *usbvision); + +// Default initalization of device driver parameters +static int isocMode = ISOC_MODE_COMPRESS; // Set the default format for ISOC endpoint +static int video_debug = 0; // Set the default Debug Mode of the device driver +static int PowerOnAtOpen = 1; // Set the default device to power on at startup +static int video_nr = -1; // Sequential Number of Video Device +static int radio_nr = -1; // Sequential Number of Radio Device +static int vbi_nr = -1; // Sequential Number of VBI Device +static char *CustomDevice=NULL; // Set as nothing.... + +// Grab parameters for the device driver + +#if defined(module_param) // Showing parameters under SYSFS +module_param(isocMode, int, 0444); +module_param(video_debug, int, 0444); +module_param(PowerOnAtOpen, int, 0444); +module_param(video_nr, int, 0444); +module_param(radio_nr, int, 0444); +module_param(vbi_nr, int, 0444); +module_param(CustomDevice, charp, 0444); +#else // Old Style +MODULE_PARAM(isocMode, "i"); +MODULE_PARM(video_debug, "i"); // Grab the Debug Mode of the device driver +MODULE_PARM(adjustCompression, "i"); // Grab the compression to be adaptive +MODULE_PARM(PowerOnAtOpen, "i"); // Grab the device to power on at startup +MODULE_PARM(SwitchSVideoInput, "i"); // To help people with Black and White output with using s-video input. Some cables and input device are wired differently. +MODULE_PARM(video_nr, "i"); // video_nr option allows to specify a certain /dev/videoX device (like /dev/video0 or /dev/video1 ...) +MODULE_PARM(radio_nr, "i"); // radio_nr option allows to specify a certain /dev/radioX device (like /dev/radio0 or /dev/radio1 ...) +MODULE_PARM(vbi_nr, "i"); // vbi_nr option allows to specify a certain /dev/vbiX device (like /dev/vbi0 or /dev/vbi1 ...) +MODULE_PARM(CustomDevice, "s"); // .... CustomDevice +#endif + +MODULE_PARM_DESC(isocMode, " Set the default format for ISOC endpoint. Default: 0x60 (Compression On)"); +MODULE_PARM_DESC(video_debug, " Set the default Debug Mode of the device driver. Default: 0 (Off)"); +MODULE_PARM_DESC(PowerOnAtOpen, " Set the default device to power on when device is opened. Default: 1 (On)"); +MODULE_PARM_DESC(video_nr, "Set video device number (/dev/videoX). Default: -1 (autodetect)"); +MODULE_PARM_DESC(radio_nr, "Set radio device number (/dev/radioX). Default: -1 (autodetect)"); +MODULE_PARM_DESC(vbi_nr, "Set vbi device number (/dev/vbiX). Default: -1 (autodetect)"); +MODULE_PARM_DESC(CustomDevice, " Define the fine tuning parameters for the device. Default: null"); + + +// Misc stuff +MODULE_AUTHOR(DRIVER_AUTHOR); +MODULE_DESCRIPTION(DRIVER_DESC); +MODULE_LICENSE(DRIVER_LICENSE); +MODULE_VERSION(USBVISION_VERSION_STRING); +MODULE_ALIAS(DRIVER_ALIAS); + + +/****************************************************************************************/ +/* SYSFS Code - Copied from the stv680.c usb module. */ +/* Device information is located at /sys/class/video4linux/video0 */ +/* Device parameters information is located at /sys/module/usbvision */ +/* Device USB Information is located at /sys/bus/usb/drivers/USBVision Video Grabber */ +/****************************************************************************************/ + + +#define YES_NO(x) ((x) ? "Yes" : "No") + +static inline struct usb_usbvision *cd_to_usbvision(struct class_device *cd) +{ + struct video_device *vdev = to_video_device(cd); + return video_get_drvdata(vdev); +} + +static ssize_t show_version(struct class_device *cd, char *buf) +{ + return sprintf(buf, "%s\n", USBVISION_VERSION_STRING); +} +static CLASS_DEVICE_ATTR(version, S_IRUGO, show_version, NULL); + +static ssize_t show_model(struct class_device *class_dev, char *buf) +{ + struct video_device *vdev = to_video_device(class_dev); + struct usb_usbvision *usbvision = video_get_drvdata(vdev); + return sprintf(buf, "%s\n", usbvision_device_data[usbvision->DevModel].ModelString); +} +static CLASS_DEVICE_ATTR(model, S_IRUGO, show_model, NULL); + +static ssize_t show_hue(struct class_device *class_dev, char *buf) +{ + struct video_device *vdev = to_video_device(class_dev); + struct usb_usbvision *usbvision = video_get_drvdata(vdev); + struct v4l2_control ctrl; + ctrl.id = V4L2_CID_HUE; + ctrl.value = 0; + call_i2c_clients(usbvision, VIDIOC_G_CTRL, &ctrl); + return sprintf(buf, "%d\n", ctrl.value >> 8); +} +static CLASS_DEVICE_ATTR(hue, S_IRUGO, show_hue, NULL); + +static ssize_t show_contrast(struct class_device *class_dev, char *buf) +{ + struct video_device *vdev = to_video_device(class_dev); + struct usb_usbvision *usbvision = video_get_drvdata(vdev); + struct v4l2_control ctrl; + ctrl.id = V4L2_CID_CONTRAST; + ctrl.value = 0; + call_i2c_clients(usbvision, VIDIOC_G_CTRL, &ctrl); + return sprintf(buf, "%d\n", ctrl.value >> 8); +} +static CLASS_DEVICE_ATTR(contrast, S_IRUGO, show_contrast, NULL); + +static ssize_t show_brightness(struct class_device *class_dev, char *buf) +{ + struct video_device *vdev = to_video_device(class_dev); + struct usb_usbvision *usbvision = video_get_drvdata(vdev); + struct v4l2_control ctrl; + ctrl.id = V4L2_CID_BRIGHTNESS; + ctrl.value = 0; + call_i2c_clients(usbvision, VIDIOC_G_CTRL, &ctrl); + return sprintf(buf, "%d\n", ctrl.value >> 8); +} +static CLASS_DEVICE_ATTR(brightness, S_IRUGO, show_brightness, NULL); + +static ssize_t show_saturation(struct class_device *class_dev, char *buf) +{ + struct video_device *vdev = to_video_device(class_dev); + struct usb_usbvision *usbvision = video_get_drvdata(vdev); + struct v4l2_control ctrl; + ctrl.id = V4L2_CID_SATURATION; + ctrl.value = 0; + call_i2c_clients(usbvision, VIDIOC_G_CTRL, &ctrl); + return sprintf(buf, "%d\n", ctrl.value >> 8); +} +static CLASS_DEVICE_ATTR(saturation, S_IRUGO, show_saturation, NULL); + +static ssize_t show_streaming(struct class_device *class_dev, char *buf) +{ + struct video_device *vdev = to_video_device(class_dev); + struct usb_usbvision *usbvision = video_get_drvdata(vdev); + return sprintf(buf, "%s\n", YES_NO(usbvision->streaming==Stream_On?1:0)); +} +static CLASS_DEVICE_ATTR(streaming, S_IRUGO, show_streaming, NULL); + +static ssize_t show_compression(struct class_device *class_dev, char *buf) +{ + struct video_device *vdev = to_video_device(class_dev); + struct usb_usbvision *usbvision = video_get_drvdata(vdev); + return sprintf(buf, "%s\n", YES_NO(usbvision->isocMode==ISOC_MODE_COMPRESS)); +} +static CLASS_DEVICE_ATTR(compression, S_IRUGO, show_compression, NULL); + +static ssize_t show_device_bridge(struct class_device *class_dev, char *buf) +{ + struct video_device *vdev = to_video_device(class_dev); + struct usb_usbvision *usbvision = video_get_drvdata(vdev); + return sprintf(buf, "%d\n", usbvision->bridgeType); +} +static CLASS_DEVICE_ATTR(bridge, S_IRUGO, show_device_bridge, NULL); + +static void usbvision_create_sysfs(struct video_device *vdev) +{ + int res; + if (vdev) { + res=video_device_create_file(vdev, &class_device_attr_version); + res=video_device_create_file(vdev, &class_device_attr_model); + res=video_device_create_file(vdev, &class_device_attr_hue); + res=video_device_create_file(vdev, &class_device_attr_contrast); + res=video_device_create_file(vdev, &class_device_attr_brightness); + res=video_device_create_file(vdev, &class_device_attr_saturation); + res=video_device_create_file(vdev, &class_device_attr_streaming); + res=video_device_create_file(vdev, &class_device_attr_compression); + res=video_device_create_file(vdev, &class_device_attr_bridge); + } +} + +static void usbvision_remove_sysfs(struct video_device *vdev) +{ + if (vdev) { + video_device_remove_file(vdev, &class_device_attr_version); + video_device_remove_file(vdev, &class_device_attr_model); + video_device_remove_file(vdev, &class_device_attr_hue); + video_device_remove_file(vdev, &class_device_attr_contrast); + video_device_remove_file(vdev, &class_device_attr_brightness); + video_device_remove_file(vdev, &class_device_attr_saturation); + video_device_remove_file(vdev, &class_device_attr_streaming); + video_device_remove_file(vdev, &class_device_attr_compression); + video_device_remove_file(vdev, &class_device_attr_bridge); + } +} + + +/* + * usbvision_open() + * + * This is part of Video 4 Linux API. The driver can be opened by one + * client only (checks internal counter 'usbvision->user'). The procedure + * then allocates buffers needed for video processing. + * + */ +static int usbvision_v4l2_open(struct inode *inode, struct file *file) +{ + struct video_device *dev = video_devdata(file); + struct usb_usbvision *usbvision = (struct usb_usbvision *) video_get_drvdata(dev); + int errCode = 0; + + PDEBUG(DBG_IO, "open"); + + + usbvision_reset_powerOffTimer(usbvision); + + if (usbvision->user) + errCode = -EBUSY; + else { + /* Allocate memory for the frame buffers */ + errCode = usbvision_frames_alloc(usbvision); + if(!errCode) { + /* Allocate memory for the scratch ring buffer */ + errCode = usbvision_scratch_alloc(usbvision); + if(!errCode) { + /* Allocate memory for the USB S buffers */ + errCode = usbvision_sbuf_alloc(usbvision); + if ((!errCode) && (usbvision->isocMode==ISOC_MODE_COMPRESS)) { + /* Allocate intermediate decompression buffers only if needed */ + errCode = usbvision_decompress_alloc(usbvision); + } + } + } + if (errCode) { + /* Deallocate all buffers if trouble */ + usbvision_frames_free(usbvision); + usbvision_scratch_free(usbvision); + usbvision_sbuf_free(usbvision); + usbvision_decompress_free(usbvision); + } + } + + /* If so far no errors then we shall start the camera */ + if (!errCode) { + down(&usbvision->lock); + if (usbvision->power == 0) { + usbvision_power_on(usbvision); + usbvision_init_i2c(usbvision); + } + + /* Send init sequence only once, it's large! */ + if (!usbvision->initialized) { + int setup_ok = 0; + setup_ok = usbvision_setup(usbvision,isocMode); + if (setup_ok) + usbvision->initialized = 1; + else + errCode = -EBUSY; + } + + if (!errCode) { + usbvision_begin_streaming(usbvision); + errCode = usbvision_init_isoc(usbvision); + /* device needs to be initialized before isoc transfer */ + usbvision_muxsel(usbvision,0); + usbvision->user++; + } + else { + if (PowerOnAtOpen) { + usbvision_i2c_usb_del_bus(&usbvision->i2c_adap); + usbvision_power_off(usbvision); + usbvision->initialized = 0; + } + } + up(&usbvision->lock); + } + + if (errCode) { + } + + /* prepare queues */ + usbvision_empty_framequeues(usbvision); + + PDEBUG(DBG_IO, "success"); + return errCode; +} + +/* + * usbvision_v4l2_close() + * + * This is part of Video 4 Linux API. The procedure + * stops streaming and deallocates all buffers that were earlier + * allocated in usbvision_v4l2_open(). + * + */ +static int usbvision_v4l2_close(struct inode *inode, struct file *file) +{ + struct video_device *dev = video_devdata(file); + struct usb_usbvision *usbvision = (struct usb_usbvision *) video_get_drvdata(dev); + + PDEBUG(DBG_IO, "close"); + down(&usbvision->lock); + + usbvision_audio_off(usbvision); + usbvision_restart_isoc(usbvision); + usbvision_stop_isoc(usbvision); + + usbvision_decompress_free(usbvision); + usbvision_rvfree(usbvision->fbuf, usbvision->fbuf_size); + usbvision_scratch_free(usbvision); + usbvision_sbuf_free(usbvision); + + usbvision->user--; + + if (PowerOnAtOpen) { + /* power off in a little while to avoid off/on every close/open short sequences */ + usbvision_set_powerOffTimer(usbvision); + usbvision->initialized = 0; + } + + up(&usbvision->lock); + + if (usbvision->remove_pending) { + info("%s: Final disconnect", __FUNCTION__); + usbvision_release(usbvision); + } + + PDEBUG(DBG_IO, "success"); + + + return 0; +} + + +/* + * usbvision_ioctl() + * + * This is part of Video 4 Linux API. The procedure handles ioctl() calls. + * + */ +static int usbvision_v4l2_do_ioctl(struct inode *inode, struct file *file, + unsigned int cmd, void *arg) +{ + struct video_device *dev = video_devdata(file); + struct usb_usbvision *usbvision = (struct usb_usbvision *) video_get_drvdata(dev); + + if (!USBVISION_IS_OPERATIONAL(usbvision)) + return -EFAULT; + + switch (cmd) { + +#ifdef CONFIG_VIDEO_ADV_DEBUG + /* ioctls to allow direct acces to the NT100x registers */ + case VIDIOC_INT_G_REGISTER: + { + struct v4l2_register *reg = arg; + int errCode; + + if (reg->i2c_id != 0) + return -EINVAL; + /* NT100x has a 8-bit register space */ + errCode = usbvision_read_reg(usbvision, reg->reg&0xff); + if (errCode < 0) { + err("%s: VIDIOC_INT_G_REGISTER failed: error %d", __FUNCTION__, errCode); + } + else { + reg->val=(unsigned char)errCode; + PDEBUG(DBG_IOCTL, "VIDIOC_INT_G_REGISTER reg=0x%02X, value=0x%02X", + (unsigned int)reg->reg, reg->val); + errCode = 0; // No error + } + return errCode; + } + case VIDIOC_INT_S_REGISTER: + { + struct v4l2_register *reg = arg; + int errCode; + + if (reg->i2c_id != 0) + return -EINVAL; + if (!capable(CAP_SYS_ADMIN)) + return -EPERM; + errCode = usbvision_write_reg(usbvision, reg->reg&0xff, reg->val); + if (errCode < 0) { + err("%s: VIDIOC_INT_S_REGISTER failed: error %d", __FUNCTION__, errCode); + } + else { + PDEBUG(DBG_IOCTL, "VIDIOC_INT_S_REGISTER reg=0x%02X, value=0x%02X", + (unsigned int)reg->reg, reg->val); + errCode = 0; + } + return 0; + } +#endif + case VIDIOC_QUERYCAP: + { + struct v4l2_capability *vc=arg; + + memset(vc, 0, sizeof(*vc)); + strlcpy(vc->driver, "USBVision", sizeof(vc->driver)); + strlcpy(vc->card, usbvision_device_data[usbvision->DevModel].ModelString, + sizeof(vc->card)); + strlcpy(vc->bus_info, usbvision->dev->dev.bus_id, + sizeof(vc->bus_info)); + vc->version = USBVISION_DRIVER_VERSION; + vc->capabilities = V4L2_CAP_VIDEO_CAPTURE | + V4L2_CAP_AUDIO | + V4L2_CAP_READWRITE | + V4L2_CAP_STREAMING | + (usbvision->have_tuner ? V4L2_CAP_TUNER : 0); + PDEBUG(DBG_IOCTL, "VIDIOC_QUERYCAP"); + return 0; + } + case VIDIOC_ENUMINPUT: + { + struct v4l2_input *vi = arg; + int chan; + + if ((vi->index >= usbvision->video_inputs) || (vi->index < 0) ) + return -EINVAL; + if (usbvision->have_tuner) { + chan = vi->index; + } + else { + chan = vi->index + 1; //skip Television string + } + switch(chan) { + case 0: + if (usbvision_device_data[usbvision->DevModel].VideoChannels == 4) { + strcpy(vi->name, "White Video Input"); + } + else { + strcpy(vi->name, "Television"); + vi->type = V4L2_INPUT_TYPE_TUNER; + vi->audioset = 1; + vi->tuner = chan; + vi->std = V4L2_STD_PAL | V4L2_STD_NTSC | V4L2_STD_SECAM; + } + break; + case 1: + vi->type = V4L2_INPUT_TYPE_CAMERA; + if (usbvision_device_data[usbvision->DevModel].VideoChannels == 4) { + strcpy(vi->name, "Green Video Input"); + } + else { + strcpy(vi->name, "Composite Video Input"); + } + vi->std = V4L2_STD_PAL; + break; + case 2: + vi->type = V4L2_INPUT_TYPE_CAMERA; + if (usbvision_device_data[usbvision->DevModel].VideoChannels == 4) { + strcpy(vi->name, "Yellow Video Input"); + } + else { + strcpy(vi->name, "S-Video Input"); + } + vi->std = V4L2_STD_PAL; + break; + case 3: + vi->type = V4L2_INPUT_TYPE_CAMERA; + strcpy(vi->name, "Red Video Input"); + vi->std = V4L2_STD_PAL; + break; + } + PDEBUG(DBG_IOCTL, "VIDIOC_ENUMINPUT name=%s:%d tuners=%d type=%d norm=%x", + vi->name, vi->index, vi->tuner,vi->type,(int)vi->std); + return 0; + } + case VIDIOC_ENUMSTD: + { + struct v4l2_standard *e = arg; + unsigned int i; + int ret; + + i = e->index; + if (i >= TVNORMS) + return -EINVAL; + ret = v4l2_video_std_construct(e, tvnorms[e->index].id, + tvnorms[e->index].name); + e->index = i; + if (ret < 0) + return ret; + return 0; + } + case VIDIOC_G_INPUT: + { + int *input = arg; + *input = usbvision->ctl_input; + return 0; + } + case VIDIOC_S_INPUT: + { + int *input = arg; + if ((*input >= usbvision->video_inputs) || (*input < 0) ) + return -EINVAL; + usbvision->ctl_input = *input; + + down(&usbvision->lock); + usbvision_muxsel(usbvision, usbvision->ctl_input); + usbvision_set_input(usbvision); + usbvision_set_output(usbvision, usbvision->curwidth, usbvision->curheight); + up(&usbvision->lock); + return 0; + } + case VIDIOC_G_STD: + { + v4l2_std_id *id = arg; + + *id = usbvision->tvnorm->id; + + PDEBUG(DBG_IOCTL, "VIDIOC_G_STD std_id=%s", usbvision->tvnorm->name); + return 0; + } + case VIDIOC_S_STD: + { + v4l2_std_id *id = arg; + unsigned int i; + + for (i = 0; i < TVNORMS; i++) + if (*id == tvnorms[i].id) + break; + if (i == TVNORMS) + for (i = 0; i < TVNORMS; i++) + if (*id & tvnorms[i].id) + break; + if (i == TVNORMS) + return -EINVAL; + + down(&usbvision->lock); + usbvision->tvnorm = &tvnorms[i]; + + call_i2c_clients(usbvision, VIDIOC_S_STD, + &usbvision->tvnorm->id); + + up(&usbvision->lock); + + PDEBUG(DBG_IOCTL, "VIDIOC_S_STD std_id=%s", usbvision->tvnorm->name); + return 0; + } + case VIDIOC_G_TUNER: + { + struct v4l2_tuner *vt = arg; + + if (!usbvision->have_tuner || vt->index) // Only tuner 0 + return -EINVAL; + strcpy(vt->name, "Television"); + /* Let clients fill in the remainder of this struct */ + call_i2c_clients(usbvision,VIDIOC_G_TUNER,vt); + + PDEBUG(DBG_IOCTL, "VIDIOC_G_TUNER signal=%x, afc=%x",vt->signal,vt->afc); + return 0; + } + case VIDIOC_S_TUNER: + { + struct v4l2_tuner *vt = arg; + + // Only no or one tuner for now + if (!usbvision->have_tuner || vt->index) + return -EINVAL; + /* let clients handle this */ + call_i2c_clients(usbvision,VIDIOC_S_TUNER,vt); + + PDEBUG(DBG_IOCTL, "VIDIOC_S_TUNER"); + return 0; + } + case VIDIOC_G_FREQUENCY: + { + struct v4l2_frequency *freq = arg; + + freq->tuner = 0; // Only one tuner + freq->type = V4L2_TUNER_ANALOG_TV; + freq->frequency = usbvision->freq; + PDEBUG(DBG_IOCTL, "VIDIOC_G_FREQUENCY freq=0x%X", (unsigned)freq->frequency); + return 0; + } + case VIDIOC_S_FREQUENCY: + { + struct v4l2_frequency *freq = arg; + + // Only no or one tuner for now + if (!usbvision->have_tuner || freq->tuner) + return -EINVAL; + + usbvision->freq = freq->frequency; + call_i2c_clients(usbvision, cmd, freq); + PDEBUG(DBG_IOCTL, "VIDIOC_S_FREQUENCY freq=0x%X", (unsigned)freq->frequency); + return 0; + } + case VIDIOC_G_AUDIO: + { + struct v4l2_audio *v = arg; + memset(v,0, sizeof(v)); + strcpy(v->name, "TV"); + PDEBUG(DBG_IOCTL, "VIDIOC_G_AUDIO"); + return 0; + } + case VIDIOC_S_AUDIO: + { + struct v4l2_audio *v = arg; + if(v->index) { + return -EINVAL; + } + PDEBUG(DBG_IOCTL, "VIDIOC_S_AUDIO"); + return 0; + } + case VIDIOC_QUERYCTRL: + { + struct v4l2_queryctrl *ctrl = arg; + int id=ctrl->id; + + memset(ctrl,0,sizeof(*ctrl)); + ctrl->id=id; + + call_i2c_clients(usbvision, cmd, arg); + + if (ctrl->type) + return 0; + else + return -EINVAL; + + PDEBUG(DBG_IOCTL,"VIDIOC_QUERYCTRL id=%x value=%x",ctrl->id,ctrl->type); + } + case VIDIOC_G_CTRL: + { + struct v4l2_control *ctrl = arg; + PDEBUG(DBG_IOCTL,"VIDIOC_G_CTRL id=%x value=%x",ctrl->id,ctrl->value); + call_i2c_clients(usbvision, VIDIOC_G_CTRL, ctrl); + return 0; + } + case VIDIOC_S_CTRL: + { + struct v4l2_control *ctrl = arg; + + PDEBUG(DBG_IOCTL, "VIDIOC_S_CTRL id=%x value=%x",ctrl->id,ctrl->value); + call_i2c_clients(usbvision, VIDIOC_S_CTRL, ctrl); + return 0; + } + case VIDIOC_REQBUFS: + { + struct v4l2_requestbuffers *vr = arg; + int ret; + + RESTRICT_TO_RANGE(vr->count,1,USBVISION_NUMFRAMES); + + // Check input validity : the user must do a VIDEO CAPTURE and MMAP method. + if((vr->type != V4L2_BUF_TYPE_VIDEO_CAPTURE) || + (vr->memory != V4L2_MEMORY_MMAP)) + return -EINVAL; + + if(usbvision->streaming == Stream_On) { + if ((ret = usbvision_stream_interrupt(usbvision))) + return ret; + } + + usbvision_empty_framequeues(usbvision); + + usbvision->curFrame = NULL; + + PDEBUG(DBG_IOCTL, "VIDIOC_REQBUFS count=%d",vr->count); + return 0; + } + case VIDIOC_QUERYBUF: + { + struct v4l2_buffer *vb = arg; + struct usbvision_frame *frame; + + // FIXME : must control that buffers are mapped (VIDIOC_REQBUFS has been called) + + if(vb->type != V4L2_CAP_VIDEO_CAPTURE) { + return -EINVAL; + } + if(vb->index>=USBVISION_NUMFRAMES) { + return -EINVAL; + } + // Updating the corresponding frame state + vb->flags = 0; + frame = &usbvision->frame[vb->index]; + if(frame->grabstate >= FrameState_Ready) + vb->flags |= V4L2_BUF_FLAG_QUEUED; + if(frame->grabstate >= FrameState_Done) + vb->flags |= V4L2_BUF_FLAG_DONE; + if(frame->grabstate == FrameState_Unused) + vb->flags |= V4L2_BUF_FLAG_MAPPED; + vb->memory = V4L2_MEMORY_MMAP; + + vb->m.offset = vb->index*usbvision->max_frame_size; + + vb->memory = V4L2_MEMORY_MMAP; + vb->field = V4L2_FIELD_NONE; + vb->length = usbvision->curwidth*usbvision->curheight*usbvision->palette.bytes_per_pixel; + vb->timestamp = usbvision->frame[vb->index].timestamp; + vb->sequence = usbvision->frame[vb->index].sequence; + return 0; + } + case VIDIOC_QBUF: + { + struct v4l2_buffer *vb = arg; + struct usbvision_frame *frame; + unsigned long lock_flags; + + // FIXME : works only on VIDEO_CAPTURE MODE, MMAP. + if(vb->type != V4L2_CAP_VIDEO_CAPTURE) { + return -EINVAL; + } + if(vb->index>=USBVISION_NUMFRAMES) { + return -EINVAL; + } + + frame = &usbvision->frame[vb->index]; + + if (frame->grabstate != FrameState_Unused) { + return -EAGAIN; + } + + /* Mark it as ready and enqueue frame */ + frame->grabstate = FrameState_Ready; + frame->scanstate = ScanState_Scanning; + frame->scanlength = 0; /* Accumulated in usbvision_parse_data() */ + + vb->flags &= ~V4L2_BUF_FLAG_DONE; + + /* set v4l2_format index */ + frame->v4l2_format = usbvision->palette; + + spin_lock_irqsave(&usbvision->queue_lock, lock_flags); + list_add_tail(&usbvision->frame[vb->index].frame, &usbvision->inqueue); + spin_unlock_irqrestore(&usbvision->queue_lock, lock_flags); + + PDEBUG(DBG_IOCTL, "VIDIOC_QBUF frame #%d",vb->index); + return 0; + } + case VIDIOC_DQBUF: + { + struct v4l2_buffer *vb = arg; + int ret; + struct usbvision_frame *f; + unsigned long lock_flags; + + if (vb->type != V4L2_BUF_TYPE_VIDEO_CAPTURE) + return -EINVAL; + + if (list_empty(&(usbvision->outqueue))) { + if (usbvision->streaming == Stream_Idle) + return -EINVAL; + ret = wait_event_interruptible + (usbvision->wait_frame, + !list_empty(&(usbvision->outqueue))); + if (ret) + return ret; + } + + spin_lock_irqsave(&usbvision->queue_lock, lock_flags); + f = list_entry(usbvision->outqueue.next, + struct usbvision_frame, frame); + list_del(usbvision->outqueue.next); + spin_unlock_irqrestore(&usbvision->queue_lock, lock_flags); + + f->grabstate = FrameState_Unused; + + vb->memory = V4L2_MEMORY_MMAP; + vb->flags = V4L2_BUF_FLAG_MAPPED | V4L2_BUF_FLAG_QUEUED | V4L2_BUF_FLAG_DONE; + vb->index = f->index; + vb->sequence = f->sequence; + vb->timestamp = f->timestamp; + vb->field = V4L2_FIELD_NONE; + vb->bytesused = f->scanlength; + + return 0; + } + case VIDIOC_STREAMON: + { + int b=V4L2_BUF_TYPE_VIDEO_CAPTURE; + + usbvision->streaming = Stream_On; + + call_i2c_clients(usbvision,VIDIOC_STREAMON , &b); + + PDEBUG(DBG_IOCTL, "VIDIOC_STREAMON"); + + return 0; + } + case VIDIOC_STREAMOFF: + { + int *type = arg; + int b=V4L2_BUF_TYPE_VIDEO_CAPTURE; + + if (*type != V4L2_BUF_TYPE_VIDEO_CAPTURE) + return -EINVAL; + + if(usbvision->streaming == Stream_On) { + usbvision_stream_interrupt(usbvision); + // Stop all video streamings + call_i2c_clients(usbvision,VIDIOC_STREAMOFF , &b); + } + usbvision_empty_framequeues(usbvision); + + PDEBUG(DBG_IOCTL, "VIDIOC_STREAMOFF"); + return 0; + } + case VIDIOC_ENUM_FMT: + { + struct v4l2_fmtdesc *vfd = arg; + + if(vfd->index>=USBVISION_SUPPORTED_PALETTES-1) { + return -EINVAL; + } + vfd->flags = 0; + vfd->type = V4L2_BUF_TYPE_VIDEO_CAPTURE; + strcpy(vfd->description,usbvision_v4l2_format[vfd->index].desc); + vfd->pixelformat = usbvision_v4l2_format[vfd->index].format; + memset(vfd->reserved, 0, sizeof(vfd->reserved)); + return 0; + } + case VIDIOC_G_FMT: + { + struct v4l2_format *vf = arg; + + switch (vf->type) { + case V4L2_BUF_TYPE_VIDEO_CAPTURE: + { + vf->fmt.pix.width = usbvision->curwidth; + vf->fmt.pix.height = usbvision->curheight; + vf->fmt.pix.pixelformat = usbvision->palette.format; + vf->fmt.pix.bytesperline = usbvision->curwidth*usbvision->palette.bytes_per_pixel; + vf->fmt.pix.sizeimage = vf->fmt.pix.bytesperline*usbvision->curheight; + vf->fmt.pix.colorspace = V4L2_COLORSPACE_SMPTE170M; + vf->fmt.pix.field = V4L2_FIELD_NONE; /* Always progressive image */ + PDEBUG(DBG_IOCTL, "VIDIOC_G_FMT w=%d, h=%d, format=%s", + vf->fmt.pix.width, vf->fmt.pix.height,usbvision->palette.desc); + return 0; + } + default: + PDEBUG(DBG_IOCTL, "VIDIOC_G_FMT invalid type %d",vf->type); + return -EINVAL; + } + return 0; + } + case VIDIOC_TRY_FMT: + case VIDIOC_S_FMT: + { + struct v4l2_format *vf = arg; + int formatIdx,ret; + + switch(vf->type) { + case V4L2_BUF_TYPE_VIDEO_CAPTURE: + { + /* Find requested format in available ones */ + for(formatIdx=0;formatIdx<USBVISION_SUPPORTED_PALETTES;formatIdx++) { + if(vf->fmt.pix.pixelformat == usbvision_v4l2_format[formatIdx].format) { + usbvision->palette = usbvision_v4l2_format[formatIdx]; + break; + } + } + /* robustness */ + if(formatIdx == USBVISION_SUPPORTED_PALETTES) { + return -EINVAL; + } + RESTRICT_TO_RANGE(vf->fmt.pix.width, MIN_FRAME_WIDTH, MAX_FRAME_WIDTH); + RESTRICT_TO_RANGE(vf->fmt.pix.height, MIN_FRAME_HEIGHT, MAX_FRAME_HEIGHT); + + vf->fmt.pix.bytesperline = vf->fmt.pix.width*usbvision->palette.bytes_per_pixel; + vf->fmt.pix.sizeimage = vf->fmt.pix.bytesperline*vf->fmt.pix.height; + + if(cmd == VIDIOC_TRY_FMT) { + PDEBUG(DBG_IOCTL, "VIDIOC_TRY_FMT grabdisplay w=%d, h=%d, format=%s", + vf->fmt.pix.width, vf->fmt.pix.height,usbvision->palette.desc); + return 0; + } + + /* stop io in case it is already in progress */ + if(usbvision->streaming == Stream_On) { + if ((ret = usbvision_stream_interrupt(usbvision))) + return ret; + } + usbvision_empty_framequeues(usbvision); + + usbvision->curFrame = NULL; + + // by now we are committed to the new data... + down(&usbvision->lock); + usbvision_set_output(usbvision, vf->fmt.pix.width, vf->fmt.pix.height); + up(&usbvision->lock); + + PDEBUG(DBG_IOCTL, "VIDIOC_S_FMT grabdisplay w=%d, h=%d, format=%s", + vf->fmt.pix.width, vf->fmt.pix.height,usbvision->palette.desc); + return 0; + } + default: + return -EINVAL; + } + } + default: + return -ENOIOCTLCMD; + } + return 0; +} + +static int usbvision_v4l2_ioctl(struct inode *inode, struct file *file, + unsigned int cmd, unsigned long arg) +{ + return video_usercopy(inode, file, cmd, arg, usbvision_v4l2_do_ioctl); +} + + +static ssize_t usbvision_v4l2_read(struct file *file, char *buf, + size_t count, loff_t *ppos) +{ + struct video_device *dev = video_devdata(file); + struct usb_usbvision *usbvision = (struct usb_usbvision *) video_get_drvdata(dev); + int noblock = file->f_flags & O_NONBLOCK; + unsigned long lock_flags; + + int frmx = -1; + int ret,i; + struct usbvision_frame *frame; + + PDEBUG(DBG_IO, "%s: %ld bytes, noblock=%d", __FUNCTION__, (unsigned long)count, noblock); + + if (!USBVISION_IS_OPERATIONAL(usbvision) || (buf == NULL)) + return -EFAULT; + + /* no stream is running, make it running ! */ + usbvision->streaming = Stream_On; + call_i2c_clients(usbvision,VIDIOC_STREAMON , NULL); + + /* First, enqueue as many frames as possible (like a user of VIDIOC_QBUF would do) */ + for(i=0;i<USBVISION_NUMFRAMES;i++) { + frame = &usbvision->frame[i]; + if(frame->grabstate == FrameState_Unused) { + /* Mark it as ready and enqueue frame */ + frame->grabstate = FrameState_Ready; + frame->scanstate = ScanState_Scanning; + frame->scanlength = 0; /* Accumulated in usbvision_parse_data() */ + + /* set v4l2_format index */ + frame->v4l2_format = usbvision->palette; + + spin_lock_irqsave(&usbvision->queue_lock, lock_flags); + list_add_tail(&frame->frame, &usbvision->inqueue); + spin_unlock_irqrestore(&usbvision->queue_lock, lock_flags); + } + } + + /* Then try to steal a frame (like a VIDIOC_DQBUF would do) */ + if (list_empty(&(usbvision->outqueue))) { + if(noblock) + return -EAGAIN; + + ret = wait_event_interruptible + (usbvision->wait_frame, + !list_empty(&(usbvision->outqueue))); + if (ret) + return ret; + } + + spin_lock_irqsave(&usbvision->queue_lock, lock_flags); + frame = list_entry(usbvision->outqueue.next, + struct usbvision_frame, frame); + list_del(usbvision->outqueue.next); + spin_unlock_irqrestore(&usbvision->queue_lock, lock_flags); + + /* An error returns an empty frame */ + if (frame->grabstate == FrameState_Error) { + frame->bytes_read = 0; + return 0; + } + + PDEBUG(DBG_IO, "%s: frmx=%d, bytes_read=%ld, scanlength=%ld", __FUNCTION__, + frame->index, frame->bytes_read, frame->scanlength); + + /* copy bytes to user space; we allow for partials reads */ + if ((count + frame->bytes_read) > (unsigned long)frame->scanlength) + count = frame->scanlength - frame->bytes_read; + + if (copy_to_user(buf, frame->data + frame->bytes_read, count)) { + return -EFAULT; + } + + frame->bytes_read += count; + PDEBUG(DBG_IO, "%s: {copy} count used=%ld, new bytes_read=%ld", __FUNCTION__, + (unsigned long)count, frame->bytes_read); + + // For now, forget the frame if it has not been read in one shot. +/* if (frame->bytes_read >= frame->scanlength) {// All data has been read */ + frame->bytes_read = 0; + + /* Mark it as available to be used again. */ + usbvision->frame[frmx].grabstate = FrameState_Unused; +/* } */ + + return count; +} + +static int usbvision_v4l2_mmap(struct file *file, struct vm_area_struct *vma) +{ + unsigned long size = vma->vm_end - vma->vm_start, + start = vma->vm_start; + void *pos; + u32 i; + + struct video_device *dev = video_devdata(file); + struct usb_usbvision *usbvision = (struct usb_usbvision *) video_get_drvdata(dev); + + down(&usbvision->lock); + + if (!USBVISION_IS_OPERATIONAL(usbvision)) { + up(&usbvision->lock); + return -EFAULT; + } + + if (!(vma->vm_flags & VM_WRITE) || + size != PAGE_ALIGN(usbvision->curwidth*usbvision->curheight*usbvision->palette.bytes_per_pixel)) { + up(&usbvision->lock); + return -EINVAL; + } + + for (i = 0; i < USBVISION_NUMFRAMES; i++) { + if (((usbvision->max_frame_size*i) >> PAGE_SHIFT) == vma->vm_pgoff) + break; + } + if (i == USBVISION_NUMFRAMES) { + PDEBUG(DBG_MMAP, "mmap: user supplied mapping address is out of range"); + up(&usbvision->lock); + return -EINVAL; + } + + /* VM_IO is eventually going to replace PageReserved altogether */ + vma->vm_flags |= VM_IO; + vma->vm_flags |= VM_RESERVED; /* avoid to swap out this VMA */ + + pos = usbvision->frame[i].data; + while (size > 0) { + + if (vm_insert_page(vma, start, vmalloc_to_page(pos))) { + PDEBUG(DBG_MMAP, "mmap: vm_insert_page failed"); + up(&usbvision->lock); + return -EAGAIN; + } + start += PAGE_SIZE; + pos += PAGE_SIZE; + size -= PAGE_SIZE; + } + + up(&usbvision->lock); + return 0; +} + + +/* + * Here comes the stuff for radio on usbvision based devices + * + */ +static int usbvision_radio_open(struct inode *inode, struct file *file) +{ + struct video_device *dev = video_devdata(file); + struct usb_usbvision *usbvision = (struct usb_usbvision *) video_get_drvdata(dev); + struct v4l2_frequency freq; + int errCode = 0; + + PDEBUG(DBG_IO, "%s:", __FUNCTION__); + + down(&usbvision->lock); + + if (usbvision->user) { + err("%s: Someone tried to open an already opened USBVision Radio!", __FUNCTION__); + errCode = -EBUSY; + } + else { + if(PowerOnAtOpen) { + usbvision_reset_powerOffTimer(usbvision); + if (usbvision->power == 0) { + usbvision_power_on(usbvision); + usbvision_init_i2c(usbvision); + } + } + + // If so far no errors then we shall start the radio + usbvision->radio = 1; + call_i2c_clients(usbvision,AUDC_SET_RADIO,&usbvision->tuner_type); + freq.frequency = 1517; //SWR3 @ 94.8MHz + call_i2c_clients(usbvision, VIDIOC_S_FREQUENCY, &freq); + usbvision_set_audio(usbvision, USBVISION_AUDIO_RADIO); + usbvision->user++; + } + + if (errCode) { + if (PowerOnAtOpen) { + usbvision_i2c_usb_del_bus(&usbvision->i2c_adap); + usbvision_power_off(usbvision); + usbvision->initialized = 0; + } + } + up(&usbvision->lock); + return errCode; +} + + +static int usbvision_radio_close(struct inode *inode, struct file *file) +{ + struct video_device *dev = video_devdata(file); + struct usb_usbvision *usbvision = (struct usb_usbvision *) video_get_drvdata(dev); + int errCode = 0; + + PDEBUG(DBG_IO, ""); + + down(&usbvision->lock); + + usbvision_audio_off(usbvision); + usbvision->radio=0; + usbvision->user--; + + if (PowerOnAtOpen) { + usbvision_set_powerOffTimer(usbvision); + usbvision->initialized = 0; + } + + up(&usbvision->lock); + + if (usbvision->remove_pending) { + info("%s: Final disconnect", __FUNCTION__); + usbvision_release(usbvision); + } + + + PDEBUG(DBG_IO, "success"); + + return errCode; +} + +static int usbvision_do_radio_ioctl(struct inode *inode, struct file *file, + unsigned int cmd, void *arg) +{ + struct video_device *dev = video_devdata(file); + struct usb_usbvision *usbvision = (struct usb_usbvision *) video_get_drvdata(dev); + + if (!USBVISION_IS_OPERATIONAL(usbvision)) + return -EIO; + + switch (cmd) { + case VIDIOC_QUERYCAP: + { + struct v4l2_capability *vc=arg; + + memset(vc, 0, sizeof(*vc)); + strlcpy(vc->driver, "USBVision", sizeof(vc->driver)); + strlcpy(vc->card, usbvision_device_data[usbvision->DevModel].ModelString, + sizeof(vc->card)); + strlcpy(vc->bus_info, usbvision->dev->dev.bus_id, + sizeof(vc->bus_info)); + vc->version = USBVISION_DRIVER_VERSION; + vc->capabilities = (usbvision->have_tuner ? V4L2_CAP_TUNER : 0); + PDEBUG(DBG_IO, "VIDIOC_QUERYCAP"); + return 0; + } + case VIDIOC_QUERYCTRL: + { + struct v4l2_queryctrl *ctrl = arg; + int id=ctrl->id; + + memset(ctrl,0,sizeof(*ctrl)); + ctrl->id=id; + + call_i2c_clients(usbvision, cmd, arg); + PDEBUG(DBG_IO,"VIDIOC_QUERYCTRL id=%x value=%x",ctrl->id,ctrl->type); + + if (ctrl->type) + return 0; + else + return -EINVAL; + + } + case VIDIOC_G_CTRL: + { + struct v4l2_control *ctrl = arg; + + call_i2c_clients(usbvision, VIDIOC_G_CTRL, ctrl); + PDEBUG(DBG_IO,"VIDIOC_G_CTRL id=%x value=%x",ctrl->id,ctrl->value); + return 0; + } + case VIDIOC_S_CTRL: + { + struct v4l2_control *ctrl = arg; + + call_i2c_clients(usbvision, VIDIOC_S_CTRL, ctrl); + PDEBUG(DBG_IO, "VIDIOC_S_CTRL id=%x value=%x",ctrl->id,ctrl->value); + return 0; + } + case VIDIOC_G_TUNER: + { + struct v4l2_tuner *t = arg; + + if (t->index > 0) + return -EINVAL; + + memset(t,0,sizeof(*t)); + strcpy(t->name, "Radio"); + t->type = V4L2_TUNER_RADIO; + + /* Let clients fill in the remainder of this struct */ + call_i2c_clients(usbvision,VIDIOC_G_TUNER,t); + PDEBUG(DBG_IO, "VIDIOC_G_TUNER signal=%x, afc=%x",t->signal,t->afc); + return 0; + } + case VIDIOC_S_TUNER: + { + struct v4l2_tuner *vt = arg; + + // Only no or one tuner for now + if (!usbvision->have_tuner || vt->index) + return -EINVAL; + /* let clients handle this */ + call_i2c_clients(usbvision,VIDIOC_S_TUNER,vt); + + PDEBUG(DBG_IO, "VIDIOC_S_TUNER"); + return 0; + } + case VIDIOC_G_AUDIO: + { + struct v4l2_audio *a = arg; + + memset(a,0,sizeof(*a)); + strcpy(a->name,"Radio"); + PDEBUG(DBG_IO, "VIDIOC_G_AUDIO"); + return 0; + } + case VIDIOC_S_AUDIO: + case VIDIOC_S_INPUT: + case VIDIOC_S_STD: + return 0; + + case VIDIOC_G_FREQUENCY: + { + struct v4l2_frequency *f = arg; + + memset(f,0,sizeof(*f)); + + f->type = V4L2_TUNER_RADIO; + f->frequency = usbvision->freq; + call_i2c_clients(usbvision, cmd, f); + PDEBUG(DBG_IO, "VIDIOC_G_FREQUENCY freq=0x%X", (unsigned)f->frequency); + + return 0; + } + case VIDIOC_S_FREQUENCY: + { + struct v4l2_frequency *f = arg; + + if (f->tuner != 0) + return -EINVAL; + usbvision->freq = f->frequency; + call_i2c_clients(usbvision, cmd, f); + PDEBUG(DBG_IO, "VIDIOC_S_FREQUENCY freq=0x%X", (unsigned)f->frequency); + + return 0; + } + default: + { + PDEBUG(DBG_IO, "%s: Unknown command %x", __FUNCTION__, cmd); + return -ENOIOCTLCMD; + } + } + return 0; +} + + +static int usbvision_radio_ioctl(struct inode *inode, struct file *file, + unsigned int cmd, unsigned long arg) +{ + return video_usercopy(inode, file, cmd, arg, usbvision_do_radio_ioctl); +} + + +/* + * Here comes the stuff for vbi on usbvision based devices + * + */ +static int usbvision_vbi_open(struct inode *inode, struct file *file) +{ + /* TODO */ + return -EINVAL; + +} + +static int usbvision_vbi_close(struct inode *inode, struct file *file) +{ + /* TODO */ + return -EINVAL; +} + +static int usbvision_do_vbi_ioctl(struct inode *inode, struct file *file, + unsigned int cmd, void *arg) +{ + /* TODO */ + return -EINVAL; +} + +static int usbvision_vbi_ioctl(struct inode *inode, struct file *file, + unsigned int cmd, unsigned long arg) +{ + return video_usercopy(inode, file, cmd, arg, usbvision_do_vbi_ioctl); +} + + +// +// Video registration stuff +// + +// Video template +static struct file_operations usbvision_fops = { + .owner = THIS_MODULE, + .open = usbvision_v4l2_open, + .release = usbvision_v4l2_close, + .read = usbvision_v4l2_read, + .mmap = usbvision_v4l2_mmap, + .ioctl = usbvision_v4l2_ioctl, + .llseek = no_llseek, +}; +static struct video_device usbvision_video_template = { + .owner = THIS_MODULE, + .type = VID_TYPE_TUNER | VID_TYPE_CAPTURE, + .hardware = VID_HARDWARE_USBVISION, + .fops = &usbvision_fops, + .name = "usbvision-video", + .release = video_device_release, + .minor = -1, +}; + + +// Radio template +static struct file_operations usbvision_radio_fops = { + .owner = THIS_MODULE, + .open = usbvision_radio_open, + .release = usbvision_radio_close, + .ioctl = usbvision_radio_ioctl, + .llseek = no_llseek, +}; + +static struct video_device usbvision_radio_template= +{ + .owner = THIS_MODULE, + .type = VID_TYPE_TUNER, + .hardware = VID_HARDWARE_USBVISION, + .fops = &usbvision_radio_fops, + .release = video_device_release, + .name = "usbvision-radio", + .minor = -1, +}; + + +// vbi template +static struct file_operations usbvision_vbi_fops = { + .owner = THIS_MODULE, + .open = usbvision_vbi_open, + .release = usbvision_vbi_close, + .ioctl = usbvision_vbi_ioctl, + .llseek = no_llseek, +}; + +static struct video_device usbvision_vbi_template= +{ + .owner = THIS_MODULE, + .type = VID_TYPE_TUNER, + .hardware = VID_HARDWARE_USBVISION, + .fops = &usbvision_vbi_fops, + .release = video_device_release, + .name = "usbvision-vbi", + .minor = -1, +}; + + +static struct video_device *usbvision_vdev_init(struct usb_usbvision *usbvision, + struct video_device *vdev_template, + char *name) +{ + struct usb_device *usb_dev = usbvision->dev; + struct video_device *vdev; + + if (usb_dev == NULL) { + err("%s: usbvision->dev is not set", __FUNCTION__); + return NULL; + } + + vdev = video_device_alloc(); + if (NULL == vdev) { + return NULL; + } + *vdev = *vdev_template; +// vdev->minor = -1; + vdev->dev = &usb_dev->dev; + snprintf(vdev->name, sizeof(vdev->name), "%s", name); + video_set_drvdata(vdev, usbvision); + return vdev; +} + +// unregister video4linux devices +static void usbvision_unregister_video(struct usb_usbvision *usbvision) +{ + // vbi Device: + if (usbvision->vbi) { + PDEBUG(DBG_PROBE, "unregister /dev/vbi%d [v4l2]", usbvision->vbi->minor & 0x1f); + if (usbvision->vbi->minor != -1) { + video_unregister_device(usbvision->vbi); + } + else { + video_device_release(usbvision->vbi); + } + usbvision->vbi = NULL; + } + + // Radio Device: + if (usbvision->rdev) { + PDEBUG(DBG_PROBE, "unregister /dev/radio%d [v4l2]", usbvision->rdev->minor & 0x1f); + if (usbvision->rdev->minor != -1) { + video_unregister_device(usbvision->rdev); + } + else { + video_device_release(usbvision->rdev); + } + usbvision->rdev = NULL; + } + + // Video Device: + if (usbvision->vdev) { + PDEBUG(DBG_PROBE, "unregister /dev/video%d [v4l2]", usbvision->vdev->minor & 0x1f); + if (usbvision->vdev->minor != -1) { + video_unregister_device(usbvision->vdev); + } + else { + video_device_release(usbvision->vdev); + } + usbvision->vdev = NULL; + } +} + +// register video4linux devices +static int __devinit usbvision_register_video(struct usb_usbvision *usbvision) +{ + // Video Device: + usbvision->vdev = usbvision_vdev_init(usbvision, &usbvision_video_template, "USBVision Video"); + if (usbvision->vdev == NULL) { + goto err_exit; + } + if (video_register_device(usbvision->vdev, VFL_TYPE_GRABBER, video_nr)<0) { + goto err_exit; + } + info("USBVision[%d]: registered USBVision Video device /dev/video%d [v4l2]", usbvision->nr,usbvision->vdev->minor & 0x1f); + + // Radio Device: + if (usbvision_device_data[usbvision->DevModel].Radio) { + // usbvision has radio + usbvision->rdev = usbvision_vdev_init(usbvision, &usbvision_radio_template, "USBVision Radio"); + if (usbvision->rdev == NULL) { + goto err_exit; + } + if (video_register_device(usbvision->rdev, VFL_TYPE_RADIO, radio_nr)<0) { + goto err_exit; + } + info("USBVision[%d]: registered USBVision Radio device /dev/radio%d [v4l2]", usbvision->nr, usbvision->rdev->minor & 0x1f); + } + // vbi Device: + if (usbvision_device_data[usbvision->DevModel].vbi) { + usbvision->vbi = usbvision_vdev_init(usbvision, &usbvision_vbi_template, "USBVision VBI"); + if (usbvision->vdev == NULL) { + goto err_exit; + } + if (video_register_device(usbvision->vbi, VFL_TYPE_VBI, vbi_nr)<0) { + goto err_exit; + } + info("USBVision[%d]: registered USBVision VBI device /dev/vbi%d [v4l2] (Not Working Yet!)", usbvision->nr,usbvision->vbi->minor & 0x1f); + } + // all done + return 0; + + err_exit: + err("USBVision[%d]: video_register_device() failed", usbvision->nr); + usbvision_unregister_video(usbvision); + return -1; +} + +/* + * usbvision_alloc() + * + * This code allocates the struct usb_usbvision. It is filled with default values. + * + * Returns NULL on error, a pointer to usb_usbvision else. + * + */ +static struct usb_usbvision *usbvision_alloc(struct usb_device *dev) +{ + struct usb_usbvision *usbvision; + + if ((usbvision = kzalloc(sizeof(struct usb_usbvision), GFP_KERNEL)) == NULL) { + goto err_exit; + } + + usbvision->dev = dev; + + init_MUTEX(&usbvision->lock); /* to 1 == available */ + + // prepare control urb for control messages during interrupts + usbvision->ctrlUrb = usb_alloc_urb(USBVISION_URB_FRAMES, GFP_KERNEL); + if (usbvision->ctrlUrb == NULL) { + goto err_exit; + } + init_waitqueue_head(&usbvision->ctrlUrb_wq); + init_MUTEX(&usbvision->ctrlUrbLock); /* to 1 == available */ + + usbvision_init_powerOffTimer(usbvision); + + return usbvision; + +err_exit: + if (usbvision && usbvision->ctrlUrb) { + usb_free_urb(usbvision->ctrlUrb); + } + if (usbvision) { + kfree(usbvision); + } + return NULL; +} + +/* + * usbvision_release() + * + * This code does final release of struct usb_usbvision. This happens + * after the device is disconnected -and- all clients closed their files. + * + */ +static void usbvision_release(struct usb_usbvision *usbvision) +{ + PDEBUG(DBG_PROBE, ""); + + down(&usbvision->lock); + + usbvision_reset_powerOffTimer(usbvision); + + usbvision->initialized = 0; + + up(&usbvision->lock); + + usbvision_remove_sysfs(usbvision->vdev); + usbvision_unregister_video(usbvision); + + if (usbvision->ctrlUrb) { + usb_free_urb(usbvision->ctrlUrb); + } + + kfree(usbvision); + + PDEBUG(DBG_PROBE, "success"); +} + + +/******************************** usb interface *****************************************/ + +static void usbvision_configure_video(struct usb_usbvision *usbvision) +{ + int model,i; + + if (usbvision == NULL) + return; + + model = usbvision->DevModel; + usbvision->palette = usbvision_v4l2_format[2]; // V4L2_PIX_FMT_RGB24; + + if (usbvision_device_data[usbvision->DevModel].Vin_Reg2 >= 0) { + usbvision->Vin_Reg2_Preset = usbvision_device_data[usbvision->DevModel].Vin_Reg2 & 0xff; + } else { + usbvision->Vin_Reg2_Preset = 0; + } + + for (i = 0; i < TVNORMS; i++) + if (usbvision_device_data[model].VideoNorm == tvnorms[i].mode) + break; + if (i == TVNORMS) + i = 0; + usbvision->tvnorm = &tvnorms[i]; /* set default norm */ + + usbvision->video_inputs = usbvision_device_data[model].VideoChannels; + usbvision->ctl_input = 0; + + /* This should be here to make i2c clients to be able to register */ + usbvision_audio_off(usbvision); //first switch off audio + if (!PowerOnAtOpen) { + usbvision_power_on(usbvision); //and then power up the noisy tuner + usbvision_init_i2c(usbvision); + } +} + +/* + * usbvision_probe() + * + * This procedure queries device descriptor and accepts the interface + * if it looks like USBVISION video device + * + */ +static int __devinit usbvision_probe(struct usb_interface *intf, const struct usb_device_id *devid) +{ + struct usb_device *dev = interface_to_usbdev(intf); + __u8 ifnum = intf->altsetting->desc.bInterfaceNumber; + const struct usb_host_interface *interface; + struct usb_usbvision *usbvision = NULL; + const struct usb_endpoint_descriptor *endpoint; + int model; + + PDEBUG(DBG_PROBE, "VID=%#04x, PID=%#04x, ifnum=%u", + dev->descriptor.idVendor, dev->descriptor.idProduct, ifnum); + /* Is it an USBVISION video dev? */ + model = 0; + for(model = 0; usbvision_device_data[model].idVendor; model++) { + if (le16_to_cpu(dev->descriptor.idVendor) != usbvision_device_data[model].idVendor) { + continue; + } + if (le16_to_cpu(dev->descriptor.idProduct) != usbvision_device_data[model].idProduct) { + continue; + } + + info("%s: %s found", __FUNCTION__, usbvision_device_data[model].ModelString); + break; + } + + if (usbvision_device_data[model].idVendor == 0) { + return -ENODEV; //no matching device + } + if (usbvision_device_data[model].Interface >= 0) { + interface = &dev->actconfig->interface[usbvision_device_data[model].Interface]->altsetting[0]; + } + else { + interface = &dev->actconfig->interface[ifnum]->altsetting[0]; + } + endpoint = &interface->endpoint[1].desc; + if ((endpoint->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) != USB_ENDPOINT_XFER_ISOC) { + err("%s: interface %d. has non-ISO endpoint!", __FUNCTION__, ifnum); + err("%s: Endpoint attribures %d", __FUNCTION__, endpoint->bmAttributes); + return -ENODEV; + } + if ((endpoint->bEndpointAddress & USB_ENDPOINT_DIR_MASK) == USB_DIR_OUT) { + err("%s: interface %d. has ISO OUT endpoint!", __FUNCTION__, ifnum); + return -ENODEV; + } + + usb_get_dev(dev); + + if ((usbvision = usbvision_alloc(dev)) == NULL) { + err("%s: couldn't allocate USBVision struct", __FUNCTION__); + return -ENOMEM; + } + if (dev->descriptor.bNumConfigurations > 1) { + usbvision->bridgeType = BRIDGE_NT1004; + } + else if (usbvision_device_data[model].ModelString == "Dazzle Fusion Model DVC-90 Rev 1 (SECAM)") { + usbvision->bridgeType = BRIDGE_NT1005; + } + else { + usbvision->bridgeType = BRIDGE_NT1003; + } + PDEBUG(DBG_PROBE, "bridgeType %d", usbvision->bridgeType); + + down(&usbvision->lock); + + usbvision->nr = usbvision_nr++; + + usbvision->have_tuner = usbvision_device_data[model].Tuner; + if (usbvision->have_tuner) { + usbvision->tuner_type = usbvision_device_data[model].TunerType; + } + + usbvision->tuner_addr = ADDR_UNSET; + + usbvision->DevModel = model; + usbvision->remove_pending = 0; + usbvision->iface = ifnum; + usbvision->ifaceAltInactive = 0; + usbvision->ifaceAltActive = 1; + usbvision->video_endp = endpoint->bEndpointAddress; + usbvision->isocPacketSize = 0; + usbvision->usb_bandwidth = 0; + usbvision->user = 0; + usbvision->streaming = Stream_Off; + usbvision_register_video(usbvision); + usbvision_configure_video(usbvision); + up(&usbvision->lock); + + + usb_set_intfdata (intf, usbvision); + usbvision_create_sysfs(usbvision->vdev); + + PDEBUG(DBG_PROBE, "success"); + return 0; +} + + +/* + * usbvision_disconnect() + * + * This procedure stops all driver activity, deallocates interface-private + * structure (pointed by 'ptr') and after that driver should be removable + * with no ill consequences. + * + */ +static void __devexit usbvision_disconnect(struct usb_interface *intf) +{ + struct usb_usbvision *usbvision = usb_get_intfdata(intf); + + PDEBUG(DBG_PROBE, ""); + + if (usbvision == NULL) { + err("%s: usb_get_intfdata() failed", __FUNCTION__); + return; + } + usb_set_intfdata (intf, NULL); + + down(&usbvision->lock); + + // At this time we ask to cancel outstanding URBs + usbvision_stop_isoc(usbvision); + + if (usbvision->power) { + usbvision_i2c_usb_del_bus(&usbvision->i2c_adap); + usbvision_power_off(usbvision); + } + usbvision->remove_pending = 1; // Now all ISO data will be ignored + + usb_put_dev(usbvision->dev); + usbvision->dev = NULL; // USB device is no more + + up(&usbvision->lock); + + if (usbvision->user) { + info("%s: In use, disconnect pending", __FUNCTION__); + wake_up_interruptible(&usbvision->wait_frame); + wake_up_interruptible(&usbvision->wait_stream); + } + else { + usbvision_release(usbvision); + } + + PDEBUG(DBG_PROBE, "success"); + +} + +static struct usb_driver usbvision_driver = { + .name = "usbvision", + .id_table = usbvision_table, + .probe = usbvision_probe, + .disconnect = usbvision_disconnect +}; + +/* + * customdevice_process() + * + * This procedure preprocesses CustomDevice parameter if any + * + */ +void customdevice_process(void) +{ + usbvision_device_data[0]=usbvision_device_data[1]; + usbvision_table[0]=usbvision_table[1]; + + if(CustomDevice) + { + char *parse=CustomDevice; + + PDEBUG(DBG_PROBE, "CustomDevide=%s", CustomDevice); + + /*format is CustomDevice="0x0573 0x4D31 0 7113 3 PAL 1 1 1 5 -1 -1 -1 -1 -1" + usbvision_device_data[0].idVendor; + usbvision_device_data[0].idProduct; + usbvision_device_data[0].Interface; + usbvision_device_data[0].Codec; + usbvision_device_data[0].VideoChannels; + usbvision_device_data[0].VideoNorm; + usbvision_device_data[0].AudioChannels; + usbvision_device_data[0].Radio; + usbvision_device_data[0].Tuner; + usbvision_device_data[0].TunerType; + usbvision_device_data[0].Vin_Reg1; + usbvision_device_data[0].Vin_Reg2; + usbvision_device_data[0].X_Offset; + usbvision_device_data[0].Y_Offset; + usbvision_device_data[0].Dvi_yuv; + usbvision_device_data[0].ModelString; + */ + + rmspace(parse); + usbvision_device_data[0].ModelString="USBVISION Custom Device"; + + parse+=2; + sscanf(parse,"%x",&usbvision_device_data[0].idVendor); + goto2next(parse); + PDEBUG(DBG_PROBE, "idVendor=0x%.4X", usbvision_device_data[0].idVendor); + parse+=2; + sscanf(parse,"%x",&usbvision_device_data[0].idProduct); + goto2next(parse); + PDEBUG(DBG_PROBE, "idProduct=0x%.4X", usbvision_device_data[0].idProduct); + sscanf(parse,"%d",&usbvision_device_data[0].Interface); + goto2next(parse); + PDEBUG(DBG_PROBE, "Interface=%d", usbvision_device_data[0].Interface); + sscanf(parse,"%d",&usbvision_device_data[0].Codec); + goto2next(parse); + PDEBUG(DBG_PROBE, "Codec=%d", usbvision_device_data[0].Codec); + sscanf(parse,"%d",&usbvision_device_data[0].VideoChannels); + goto2next(parse); + PDEBUG(DBG_PROBE, "VideoChannels=%d", usbvision_device_data[0].VideoChannels); + + switch(*parse) + { + case 'P': + PDEBUG(DBG_PROBE, "VideoNorm=PAL"); + usbvision_device_data[0].VideoNorm=VIDEO_MODE_PAL; + break; + + case 'S': + PDEBUG(DBG_PROBE, "VideoNorm=SECAM"); + usbvision_device_data[0].VideoNorm=VIDEO_MODE_SECAM; + break; + + case 'N': + PDEBUG(DBG_PROBE, "VideoNorm=NTSC"); + usbvision_device_data[0].VideoNorm=VIDEO_MODE_NTSC; + break; + + default: + PDEBUG(DBG_PROBE, "VideoNorm=PAL (by default)"); + usbvision_device_data[0].VideoNorm=VIDEO_MODE_PAL; + break; + } + goto2next(parse); + + sscanf(parse,"%d",&usbvision_device_data[0].AudioChannels); + goto2next(parse); + PDEBUG(DBG_PROBE, "AudioChannels=%d", usbvision_device_data[0].AudioChannels); + sscanf(parse,"%d",&usbvision_device_data[0].Radio); + goto2next(parse); + PDEBUG(DBG_PROBE, "Radio=%d", usbvision_device_data[0].Radio); + sscanf(parse,"%d",&usbvision_device_data[0].Tuner); + goto2next(parse); + PDEBUG(DBG_PROBE, "Tuner=%d", usbvision_device_data[0].Tuner); + sscanf(parse,"%d",&usbvision_device_data[0].TunerType); + goto2next(parse); + PDEBUG(DBG_PROBE, "TunerType=%d", usbvision_device_data[0].TunerType); + sscanf(parse,"%d",&usbvision_device_data[0].Vin_Reg1); + goto2next(parse); + PDEBUG(DBG_PROBE, "Vin_Reg1=%d", usbvision_device_data[0].Vin_Reg1); + sscanf(parse,"%d",&usbvision_device_data[0].Vin_Reg2); + goto2next(parse); + PDEBUG(DBG_PROBE, "Vin_Reg2=%d", usbvision_device_data[0].Vin_Reg2); + sscanf(parse,"%d",&usbvision_device_data[0].X_Offset); + goto2next(parse); + PDEBUG(DBG_PROBE, "X_Offset=%d", usbvision_device_data[0].X_Offset); + sscanf(parse,"%d",&usbvision_device_data[0].Y_Offset); + goto2next(parse); + PDEBUG(DBG_PROBE, "Y_Offset=%d", usbvision_device_data[0].Y_Offset); + sscanf(parse,"%d",&usbvision_device_data[0].Dvi_yuv); + PDEBUG(DBG_PROBE, "Dvi_yuv=%d", usbvision_device_data[0].Dvi_yuv); + + //add to usbvision_table also + usbvision_table[0].match_flags=USB_DEVICE_ID_MATCH_DEVICE; + usbvision_table[0].idVendor=usbvision_device_data[0].idVendor; + usbvision_table[0].idProduct=usbvision_device_data[0].idProduct; + + } +} + + + +/* + * usbvision_init() + * + * This code is run to initialize the driver. + * + */ +static int __init usbvision_init(void) +{ + int errCode; + + PDEBUG(DBG_PROBE, ""); + + PDEBUG(DBG_IOCTL, "IOCTL debugging is enabled [video]"); + PDEBUG(DBG_IO, "IO debugging is enabled [video]"); + PDEBUG(DBG_PROBE, "PROBE debugging is enabled [video]"); + PDEBUG(DBG_MMAP, "MMAP debugging is enabled [video]"); + + /* disable planar mode support unless compression enabled */ + if (isocMode != ISOC_MODE_COMPRESS ) { + // FIXME : not the right way to set supported flag + usbvision_v4l2_format[6].supported = 0; // V4L2_PIX_FMT_YVU420 + usbvision_v4l2_format[7].supported = 0; // V4L2_PIX_FMT_YUV422P + } + + customdevice_process(); + + errCode = usb_register(&usbvision_driver); + + if (errCode == 0) { + info(DRIVER_DESC " : " USBVISION_VERSION_STRING); + PDEBUG(DBG_PROBE, "success"); + } + return errCode; +} + +static void __exit usbvision_exit(void) +{ + PDEBUG(DBG_PROBE, ""); + + usb_deregister(&usbvision_driver); + PDEBUG(DBG_PROBE, "success"); +} + +module_init(usbvision_init); +module_exit(usbvision_exit); + +/* + * Overrides for Emacs so that we follow Linus's tabbing style. + * --------------------------------------------------------------------------- + * Local variables: + * c-basic-offset: 8 + * End: + */ diff --git a/drivers/media/video/usbvision/usbvision.h b/drivers/media/video/usbvision/usbvision.h new file mode 100644 index 00000000000..0e7e3d653ca --- /dev/null +++ b/drivers/media/video/usbvision/usbvision.h @@ -0,0 +1,558 @@ +/* + * USBVISION.H + * usbvision header file + * + * Copyright (c) 1999-2005 Joerg Heckenbach <joerg@heckenbach-aw.de> + * Dwaine Garden <dwainegarden@rogers.com> + * + * + * Report problems to v4l MailingList : http://www.redhat.com/mailman/listinfo/video4linux-list + * + * This module is part of usbvision driver project. + * Updates to driver completed by Dwaine P. Garden + * v4l2 conversion by Thierry Merle <thierry.merle@free.fr> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + + +#ifndef __LINUX_USBVISION_H +#define __LINUX_USBVISION_H + +#include <linux/list.h> +#include <linux/usb.h> +#include <media/v4l2-common.h> +#include <media/tuner.h> +#include <linux/videodev2.h> + +#define USBVISION_DEBUG /* Turn on debug messages */ + +#ifndef VID_HARDWARE_USBVISION + #define VID_HARDWARE_USBVISION 34 /* USBVision Video Grabber */ +#endif + +#define USBVISION_PWR_REG 0x00 + #define USBVISION_SSPND_EN (1 << 1) + #define USBVISION_RES2 (1 << 2) + #define USBVISION_PWR_VID (1 << 5) + #define USBVISION_E2_EN (1 << 7) +#define USBVISION_CONFIG_REG 0x01 +#define USBVISION_ADRS_REG 0x02 +#define USBVISION_ALTER_REG 0x03 +#define USBVISION_FORCE_ALTER_REG 0x04 +#define USBVISION_STATUS_REG 0x05 +#define USBVISION_IOPIN_REG 0x06 + #define USBVISION_IO_1 (1 << 0) + #define USBVISION_IO_2 (1 << 1) + #define USBVISION_AUDIO_IN 0 + #define USBVISION_AUDIO_TV 1 + #define USBVISION_AUDIO_RADIO 2 + #define USBVISION_AUDIO_MUTE 3 +#define USBVISION_SER_MODE 0x07 +#define USBVISION_SER_ADRS 0x08 +#define USBVISION_SER_CONT 0x09 +#define USBVISION_SER_DAT1 0x0A +#define USBVISION_SER_DAT2 0x0B +#define USBVISION_SER_DAT3 0x0C +#define USBVISION_SER_DAT4 0x0D +#define USBVISION_EE_DATA 0x0E +#define USBVISION_EE_LSBAD 0x0F +#define USBVISION_EE_CONT 0x10 +#define USBVISION_DRM_CONT 0x12 + #define USBVISION_REF (1 << 0) + #define USBVISION_RES_UR (1 << 2) + #define USBVISION_RES_FDL (1 << 3) + #define USBVISION_RES_VDW (1 << 4) +#define USBVISION_DRM_PRM1 0x13 +#define USBVISION_DRM_PRM2 0x14 +#define USBVISION_DRM_PRM3 0x15 +#define USBVISION_DRM_PRM4 0x16 +#define USBVISION_DRM_PRM5 0x17 +#define USBVISION_DRM_PRM6 0x18 +#define USBVISION_DRM_PRM7 0x19 +#define USBVISION_DRM_PRM8 0x1A +#define USBVISION_VIN_REG1 0x1B + #define USBVISION_8_422_SYNC 0x01 + #define USBVISION_16_422_SYNC 0x02 + #define USBVISION_VSNC_POL (1 << 3) + #define USBVISION_HSNC_POL (1 << 4) + #define USBVISION_FID_POL (1 << 5) + #define USBVISION_HVALID_PO (1 << 6) + #define USBVISION_VCLK_POL (1 << 7) +#define USBVISION_VIN_REG2 0x1C + #define USBVISION_AUTO_FID (1 << 0) + #define USBVISION_NONE_INTER (1 << 1) + #define USBVISION_NOHVALID (1 << 2) + #define USBVISION_UV_ID (1 << 3) + #define USBVISION_FIX_2C (1 << 4) + #define USBVISION_SEND_FID (1 << 5) + #define USBVISION_KEEP_BLANK (1 << 7) +#define USBVISION_LXSIZE_I 0x1D +#define USBVISION_MXSIZE_I 0x1E +#define USBVISION_LYSIZE_I 0x1F +#define USBVISION_MYSIZE_I 0x20 +#define USBVISION_LX_OFFST 0x21 +#define USBVISION_MX_OFFST 0x22 +#define USBVISION_LY_OFFST 0x23 +#define USBVISION_MY_OFFST 0x24 +#define USBVISION_FRM_RATE 0x25 +#define USBVISION_LXSIZE_O 0x26 +#define USBVISION_MXSIZE_O 0x27 +#define USBVISION_LYSIZE_O 0x28 +#define USBVISION_MYSIZE_O 0x29 +#define USBVISION_FILT_CONT 0x2A +#define USBVISION_VO_MODE 0x2B +#define USBVISION_INTRA_CYC 0x2C +#define USBVISION_STRIP_SZ 0x2D +#define USBVISION_FORCE_INTRA 0x2E +#define USBVISION_FORCE_UP 0x2F +#define USBVISION_BUF_THR 0x30 +#define USBVISION_DVI_YUV 0x31 +#define USBVISION_AUDIO_CONT 0x32 +#define USBVISION_AUD_PK_LEN 0x33 +#define USBVISION_BLK_PK_LEN 0x34 +#define USBVISION_PCM_THR1 0x38 +#define USBVISION_PCM_THR2 0x39 +#define USBVISION_DIST_THR_L 0x3A +#define USBVISION_DIST_THR_H 0x3B +#define USBVISION_MAX_DIST_L 0x3C +#define USBVISION_MAX_DIST_H 0x3D +#define USBVISION_OP_CODE 0x33 + +#define MAX_BYTES_PER_PIXEL 4 + +#define MIN_FRAME_WIDTH 64 +#define MAX_USB_WIDTH 320 //384 +#define MAX_FRAME_WIDTH 320 //384 /*streching sometimes causes crashes*/ + +#define MIN_FRAME_HEIGHT 48 +#define MAX_USB_HEIGHT 240 //288 +#define MAX_FRAME_HEIGHT 240 //288 /*Streching sometimes causes crashes*/ + +#define MAX_FRAME_SIZE (MAX_FRAME_WIDTH * MAX_FRAME_HEIGHT * MAX_BYTES_PER_PIXEL) +#define USBVISION_CLIPMASK_SIZE (MAX_FRAME_WIDTH * MAX_FRAME_HEIGHT / 8) //bytesize of clipmask + +#define USBVISION_URB_FRAMES 32 +#define USBVISION_MAX_ISOC_PACKET_SIZE 959 // NT1003 Specs Document says 1023 + +#define USBVISION_NUM_HEADERMARKER 20 +#define USBVISION_NUMFRAMES 3 /* Maximum number of frames an application can get */ +#define USBVISION_NUMSBUF 2 /* Dimensioning the USB S buffering */ + +#define USBVISION_POWEROFF_TIME 3 * (HZ) // 3 seconds + + +#define FRAMERATE_MIN 0 +#define FRAMERATE_MAX 31 + +enum { + ISOC_MODE_YUV422 = 0x03, + ISOC_MODE_YUV420 = 0x14, + ISOC_MODE_COMPRESS = 0x60, +}; + +/* This macro restricts an int variable to an inclusive range */ +#define RESTRICT_TO_RANGE(v,mi,ma) { if ((v) < (mi)) (v) = (mi); else if ((v) > (ma)) (v) = (ma); } + +/* + * We use macros to do YUV -> RGB conversion because this is + * very important for speed and totally unimportant for size. + * + * YUV -> RGB Conversion + * --------------------- + * + * B = 1.164*(Y-16) + 2.018*(V-128) + * G = 1.164*(Y-16) - 0.813*(U-128) - 0.391*(V-128) + * R = 1.164*(Y-16) + 1.596*(U-128) + * + * If you fancy integer arithmetics (as you should), hear this: + * + * 65536*B = 76284*(Y-16) + 132252*(V-128) + * 65536*G = 76284*(Y-16) - 53281*(U-128) - 25625*(V-128) + * 65536*R = 76284*(Y-16) + 104595*(U-128) + * + * Make sure the output values are within [0..255] range. + */ +#define LIMIT_RGB(x) (((x) < 0) ? 0 : (((x) > 255) ? 255 : (x))) +#define YUV_TO_RGB_BY_THE_BOOK(my,mu,mv,mr,mg,mb) { \ + int mm_y, mm_yc, mm_u, mm_v, mm_r, mm_g, mm_b; \ + mm_y = (my) - 16; \ + mm_u = (mu) - 128; \ + mm_v = (mv) - 128; \ + mm_yc= mm_y * 76284; \ + mm_b = (mm_yc + 132252*mm_v ) >> 16; \ + mm_g = (mm_yc - 53281*mm_u - 25625*mm_v ) >> 16; \ + mm_r = (mm_yc + 104595*mm_u ) >> 16; \ + mb = LIMIT_RGB(mm_b); \ + mg = LIMIT_RGB(mm_g); \ + mr = LIMIT_RGB(mm_r); \ +} + +/* Debugging aid */ +#define USBVISION_SAY_AND_WAIT(what) { \ + wait_queue_head_t wq; \ + init_waitqueue_head(&wq); \ + printk(KERN_INFO "Say: %s\n", what); \ + interruptible_sleep_on_timeout (&wq, HZ*3); \ +} + +/* + * This macro checks if usbvision is still operational. The 'usbvision' + * pointer must be valid, usbvision->dev must be valid, we are not + * removing the device and the device has not erred on us. + */ +#define USBVISION_IS_OPERATIONAL(udevice) (\ + (udevice != NULL) && \ + ((udevice)->dev != NULL) && \ + ((udevice)->last_error == 0) && \ + (!(udevice)->remove_pending)) + +/* I2C structures */ +struct i2c_algo_usb_data { + void *data; /* private data for lowlevel routines */ + int (*inb) (void *data, unsigned char addr, char *buf, short len); + int (*outb) (void *data, unsigned char addr, char *buf, short len); + + /* local settings */ + int udelay; + int mdelay; + int timeout; +}; + +#define I2C_USB_ADAP_MAX 16 + +/* ----------------------------------------------------------------- */ +/* usbvision video structures */ +/* ----------------------------------------------------------------- */ +enum ScanState { + ScanState_Scanning, /* Scanning for header */ + ScanState_Lines /* Parsing lines */ +}; + +/* Completion states of the data parser */ +enum ParseState { + ParseState_Continue, /* Just parse next item */ + ParseState_NextFrame, /* Frame done, send it to V4L */ + ParseState_Out, /* Not enough data for frame */ + ParseState_EndParse /* End parsing */ +}; + +enum FrameState { + FrameState_Unused, /* Unused (no MCAPTURE) */ + FrameState_Ready, /* Ready to start grabbing */ + FrameState_Grabbing, /* In the process of being grabbed into */ + FrameState_Done, /* Finished grabbing, but not been synced yet */ + FrameState_DoneHold, /* Are syncing or reading */ + FrameState_Error, /* Something bad happened while processing */ +}; + +/* stream states */ +enum StreamState { + Stream_Off, /* Driver streaming is completely OFF */ + Stream_Idle, /* Driver streaming is ready to be put ON by the application */ + Stream_Interrupt, /* Driver streaming must be interrupted */ + Stream_On, /* Driver streaming is put ON by the application */ +}; + +enum IsocState { + IsocState_InFrame, /* Isoc packet is member of frame */ + IsocState_NoFrame, /* Isoc packet is not member of any frame */ +}; + +struct usb_device; + +struct usbvision_sbuf { + char *data; + struct urb *urb; +}; + +#define USBVISION_MAGIC_1 0x55 +#define USBVISION_MAGIC_2 0xAA +#define USBVISION_HEADER_LENGTH 0x0c +#define USBVISION_SAA7111_ADDR 0x48 +#define USBVISION_SAA7113_ADDR 0x4a +#define USBVISION_IIC_LRACK 0x20 +#define USBVISION_IIC_LRNACK 0x30 +#define USBVISION_FRAME_FORMAT_PARAM_INTRA (1<<7) + +struct usbvision_v4l2_format_st { + int supported; + int bytes_per_pixel; + int depth; + int format; + char *desc; +}; +#define USBVISION_SUPPORTED_PALETTES ARRAY_SIZE(usbvision_v4l2_format) + +struct usbvision_frame_header { + unsigned char magic_1; /* 0 magic */ + unsigned char magic_2; /* 1 magic */ + unsigned char headerLength; /* 2 */ + unsigned char frameNum; /* 3 */ + unsigned char framePhase; /* 4 */ + unsigned char frameLatency; /* 5 */ + unsigned char dataFormat; /* 6 */ + unsigned char formatParam; /* 7 */ + unsigned char frameWidthLo; /* 8 */ + unsigned char frameWidthHi; /* 9 */ + unsigned char frameHeightLo; /* 10 */ + unsigned char frameHeightHi; /* 11 */ + __u16 frameWidth; /* 8 - 9 after endian correction*/ + __u16 frameHeight; /* 10 - 11 after endian correction*/ +}; + +/* tvnorms */ +struct usbvision_tvnorm { + char *name; + v4l2_std_id id; + /* mode for saa7113h */ + int mode; +}; + +struct usbvision_frame { + char *data; /* Frame buffer */ + struct usbvision_frame_header isocHeader; /* Header from stream */ + + int width; /* Width application is expecting */ + int height; /* Height */ + int index; /* Frame index */ + int frmwidth; /* Width the frame actually is */ + int frmheight; /* Height */ + + volatile int grabstate; /* State of grabbing */ + int scanstate; /* State of scanning */ + + struct list_head frame; + + int curline; /* Line of frame we're working on */ + + long scanlength; /* uncompressed, raw data length of frame */ + long bytes_read; /* amount of scanlength that has been read from data */ + struct usbvision_v4l2_format_st v4l2_format; /* format the user needs*/ + int v4l2_linesize; /* bytes for one videoline*/ + struct timeval timestamp; + int sequence; // How many video frames we send to user +}; + +#define CODEC_SAA7113 7113 +#define CODEC_SAA7111 7111 +#define BRIDGE_NT1003 1003 +#define BRIDGE_NT1004 1004 +#define BRIDGE_NT1005 1005 + +struct usbvision_device_data_st { + int idVendor; + int idProduct; + int Interface; /* to handle special interface number like BELKIN and Hauppauge WinTV-USB II */ + int Codec; + int VideoChannels; + __u64 VideoNorm; + int AudioChannels; + int Radio; + int vbi; + int Tuner; + int TunerType; + int Vin_Reg1; + int Vin_Reg2; + int X_Offset; + int Y_Offset; + int Dvi_yuv; + char *ModelString; +}; + +/* Declared on usbvision-cards.c */ +extern struct usbvision_device_data_st usbvision_device_data[]; +extern struct usb_device_id usbvision_table[]; + +struct usb_usbvision { + struct video_device *vdev; /* Video Device */ + struct video_device *rdev; /* Radio Device */ + struct video_device *vbi; /* VBI Device */ + + /* i2c Declaration Section*/ + struct i2c_adapter i2c_adap; + struct i2c_algo_usb_data i2c_algo; + struct i2c_client i2c_client; + + struct urb *ctrlUrb; + unsigned char ctrlUrbBuffer[8]; + int ctrlUrbBusy; + struct usb_ctrlrequest ctrlUrbSetup; + wait_queue_head_t ctrlUrb_wq; // Processes waiting + struct semaphore ctrlUrbLock; + + /* configuration part */ + int have_tuner; + int tuner_type; + int tuner_addr; + int bridgeType; // NT1003, NT1004, NT1005 + int channel; + int radio; + int video_inputs; // # of inputs + unsigned long freq; + int AudioMute; + int AudioChannel; + int isocMode; // format of video data for the usb isoc-transfer + unsigned int nr; // Number of the device + + /* Device structure */ + struct usb_device *dev; + unsigned char iface; /* Video interface number */ + unsigned char ifaceAltActive, ifaceAltInactive; /* Alt settings */ + unsigned char Vin_Reg2_Preset; + struct semaphore lock; + struct timer_list powerOffTimer; + struct work_struct powerOffWork; + int power; /* is the device powered on? */ + int user; /* user count for exclusive use */ + int initialized; /* Had we already sent init sequence? */ + int DevModel; /* What type of USBVISION device we got? */ + enum StreamState streaming; /* Are we streaming Isochronous? */ + int last_error; /* What calamity struck us? */ + int curwidth; /* width of the frame the device is currently set to*/ + int curheight; /* height of the frame the device is currently set to*/ + int stretch_width; /* stretch-factor for frame width (from usb to screen)*/ + int stretch_height; /* stretch-factor for frame height (from usb to screen)*/ + char *fbuf; /* Videodev buffer area for mmap*/ + int max_frame_size; /* Bytes in one video frame */ + int fbuf_size; /* Videodev buffer size */ + spinlock_t queue_lock; /* spinlock for protecting mods on inqueue and outqueue */ + struct list_head inqueue, outqueue; /* queued frame list and ready to dequeue frame list */ + wait_queue_head_t wait_frame; /* Processes waiting */ + wait_queue_head_t wait_stream; /* Processes waiting */ + struct usbvision_frame *curFrame; // pointer to current frame, set by usbvision_find_header + struct usbvision_frame frame[USBVISION_NUMFRAMES]; // frame buffer + struct usbvision_sbuf sbuf[USBVISION_NUMSBUF]; // S buffering + volatile int remove_pending; /* If set then about to exit */ + + /* Scratch space from the Isochronous Pipe.*/ + unsigned char *scratch; + int scratch_read_ptr; + int scratch_write_ptr; + int scratch_headermarker[USBVISION_NUM_HEADERMARKER]; + int scratch_headermarker_read_ptr; + int scratch_headermarker_write_ptr; + enum IsocState isocstate; + struct usbvision_v4l2_format_st palette; + + struct v4l2_capability vcap; /* Video capabilities */ + unsigned int ctl_input; /* selected input */ + struct usbvision_tvnorm *tvnorm; /* selected tv norm */ + unsigned char video_endp; /* 0x82 for USBVISION devices based */ + + // Decompression stuff: + unsigned char *IntraFrameBuffer; /* Buffer for reference frame */ + int BlockPos; //for test only + int requestIntra; // 0 = normal; 1 = intra frame is requested; + int lastIsocFrameNum; // check for lost isoc frames + int isocPacketSize; // need to calculate usedBandwidth + int usedBandwidth; // used bandwidth 0-100%, need to set comprLevel + int comprLevel; // How strong (100) or weak (0) is compression + int lastComprLevel; // How strong (100) or weak (0) was compression + int usb_bandwidth; /* Mbit/s */ + + /* Statistics that can be overlayed on the screen */ + unsigned long isocUrbCount; // How many URBs we received so far + unsigned long urb_length; /* Length of last URB */ + unsigned long isocDataCount; /* How many bytes we received */ + unsigned long header_count; /* How many frame headers we found */ + unsigned long scratch_ovf_count; /* How many times we overflowed scratch */ + unsigned long isocSkipCount; /* How many empty ISO packets received */ + unsigned long isocErrCount; /* How many bad ISO packets received */ + unsigned long isocPacketCount; // How many packets we totally got + unsigned long timeInIrq; // How long do we need for interrupt + int isocMeasureBandwidthCount; + int frame_num; // How many video frames we send to user + int maxStripLen; // How big is the biggest strip + int comprBlockPos; + int stripLenErrors; // How many times was BlockPos greater than StripLen + int stripMagicErrors; + int stripLineNumberErrors; + int ComprBlockTypes[4]; +}; + + +/* --------------------------------------------------------------- */ +/* defined in usbvision-i2c.c */ +/* i2c-algo-usb declaration */ +/* --------------------------------------------------------------- */ + +int usbvision_i2c_usb_add_bus(struct i2c_adapter *); +int usbvision_i2c_usb_del_bus(struct i2c_adapter *); + +static inline void *i2c_get_algo_usb_data (struct i2c_algo_usb_data *dev) +{ + return dev->data; +} + +static inline void i2c_set_algo_usb_data (struct i2c_algo_usb_data *dev, void *data) +{ + dev->data = data; +} + + +/* ----------------------------------------------------------------------- */ +/* usbvision specific I2C functions */ +/* ----------------------------------------------------------------------- */ +int usbvision_init_i2c(struct usb_usbvision *usbvision); +void call_i2c_clients(struct usb_usbvision *usbvision, unsigned int cmd,void *arg); + +/* defined in usbvision-core.c */ +void *usbvision_rvmalloc(unsigned long size); +void usbvision_rvfree(void *mem, unsigned long size); +int usbvision_read_reg(struct usb_usbvision *usbvision, unsigned char reg); +int usbvision_write_reg(struct usb_usbvision *usbvision, unsigned char reg, + unsigned char value); + +int usbvision_frames_alloc(struct usb_usbvision *usbvision); +void usbvision_frames_free(struct usb_usbvision *usbvision); +int usbvision_scratch_alloc(struct usb_usbvision *usbvision); +void usbvision_scratch_free(struct usb_usbvision *usbvision); +int usbvision_sbuf_alloc(struct usb_usbvision *usbvision); +void usbvision_sbuf_free(struct usb_usbvision *usbvision); +int usbvision_decompress_alloc(struct usb_usbvision *usbvision); +void usbvision_decompress_free(struct usb_usbvision *usbvision); + +int usbvision_setup(struct usb_usbvision *usbvision,int format); +int usbvision_init_isoc(struct usb_usbvision *usbvision); +int usbvision_restart_isoc(struct usb_usbvision *usbvision); +void usbvision_stop_isoc(struct usb_usbvision *usbvision); + +int usbvision_set_audio(struct usb_usbvision *usbvision, int AudioChannel); +int usbvision_audio_off(struct usb_usbvision *usbvision); + +int usbvision_begin_streaming(struct usb_usbvision *usbvision); +void usbvision_empty_framequeues(struct usb_usbvision *dev); +int usbvision_stream_interrupt(struct usb_usbvision *dev); + +int usbvision_muxsel(struct usb_usbvision *usbvision, int channel); +int usbvision_set_input(struct usb_usbvision *usbvision); +int usbvision_set_output(struct usb_usbvision *usbvision, int width, int height); + +void usbvision_init_powerOffTimer(struct usb_usbvision *usbvision); +void usbvision_set_powerOffTimer(struct usb_usbvision *usbvision); +void usbvision_reset_powerOffTimer(struct usb_usbvision *usbvision); +int usbvision_power_off(struct usb_usbvision *usbvision); +int usbvision_power_on(struct usb_usbvision *usbvision); + +#endif /* __LINUX_USBVISION_H */ + +/* + * Overrides for Emacs so that we follow Linus's tabbing style. + * --------------------------------------------------------------------------- + * Local variables: + * c-basic-offset: 8 + * End: + */ diff --git a/drivers/media/video/v4l1-compat.c b/drivers/media/video/v4l1-compat.c index 1d899e2db39..8a13e595304 100644 --- a/drivers/media/video/v4l1-compat.c +++ b/drivers/media/video/v4l1-compat.c @@ -350,6 +350,7 @@ v4l_compat_translate_ioctl(struct inode *inode, struct video_buffer *buffer = arg; memset(buffer, 0, sizeof(*buffer)); + memset(&fbuf2, 0, sizeof(fbuf2)); err = drv(inode, file, VIDIOC_G_FBUF, &fbuf2); if (err < 0) { @@ -616,6 +617,7 @@ v4l_compat_translate_ioctl(struct inode *inode, case VIDIOCSPICT: /* set tone controls & partial capture format */ { struct video_picture *pict = arg; + memset(&fbuf2, 0, sizeof(fbuf2)); set_v4l_control(inode, file, V4L2_CID_BRIGHTNESS, pict->brightness, drv); @@ -708,12 +710,22 @@ v4l_compat_translate_ioctl(struct inode *inode, } case VIDIOCSTUNER: /* select a tuner input */ { - err = 0; + struct video_tuner *tun = arg; + struct v4l2_tuner t; + memset(&t,0,sizeof(t)); + + t.index=tun->tuner; + + err = drv(inode, file, VIDIOC_S_INPUT, &t); + if (err < 0) + dprintk("VIDIOCSTUNER / VIDIOC_S_INPUT: %d\n",err); + break; } case VIDIOCGFREQ: /* get frequency */ { unsigned long *freq = arg; + memset(&freq2,0,sizeof(freq2)); freq2.tuner = 0; err = drv(inode, file, VIDIOC_G_FREQUENCY, &freq2); @@ -726,8 +738,8 @@ v4l_compat_translate_ioctl(struct inode *inode, case VIDIOCSFREQ: /* set frequency */ { unsigned long *freq = arg; + memset(&freq2,0,sizeof(freq2)); - freq2.tuner = 0; drv(inode, file, VIDIOC_G_FREQUENCY, &freq2); freq2.frequency = *freq; err = drv(inode, file, VIDIOC_S_FREQUENCY, &freq2); @@ -738,6 +750,7 @@ v4l_compat_translate_ioctl(struct inode *inode, case VIDIOCGAUDIO: /* get audio properties/controls */ { struct video_audio *aud = arg; + memset(&aud2,0,sizeof(aud2)); err = drv(inode, file, VIDIOC_G_AUDIO, &aud2); if (err < 0) { @@ -898,6 +911,7 @@ v4l_compat_translate_ioctl(struct inode *inode, { int *i = arg; + memset(&buf2,0,sizeof(buf2)); buf2.index = *i; buf2.type = V4L2_BUF_TYPE_VIDEO_CAPTURE; err = drv(inode, file, VIDIOC_QUERYBUF, &buf2); diff --git a/drivers/media/video/v4l2-common.c b/drivers/media/video/v4l2-common.c index 78d28b03ec9..752c82c37f5 100644 --- a/drivers/media/video/v4l2-common.c +++ b/drivers/media/video/v4l2-common.c @@ -87,6 +87,78 @@ MODULE_LICENSE("GPL"); */ +char *v4l2_norm_to_name(v4l2_std_id id) +{ + char *name; + + switch (id) { + case V4L2_STD_PAL: + name="PAL"; break; + case V4L2_STD_PAL_BG: + name="PAL-BG"; break; + case V4L2_STD_PAL_DK: + name="PAL-DK"; break; + case V4L2_STD_PAL_B: + name="PAL-B"; break; + case V4L2_STD_PAL_B1: + name="PAL-B1"; break; + case V4L2_STD_PAL_G: + name="PAL-G"; break; + case V4L2_STD_PAL_H: + name="PAL-H"; break; + case V4L2_STD_PAL_I: + name="PAL-I"; break; + case V4L2_STD_PAL_D: + name="PAL-D"; break; + case V4L2_STD_PAL_D1: + name="PAL-D1"; break; + case V4L2_STD_PAL_K: + name="PAL-K"; break; + case V4L2_STD_PAL_M: + name="PAL-M"; break; + case V4L2_STD_PAL_N: + name="PAL-N"; break; + case V4L2_STD_PAL_Nc: + name="PAL-Nc"; break; + case V4L2_STD_PAL_60: + name="PAL-60"; break; + case V4L2_STD_NTSC: + name="NTSC"; break; + case V4L2_STD_NTSC_M: + name="NTSC-M"; break; + case V4L2_STD_NTSC_M_JP: + name="NTSC-M-JP"; break; + case V4L2_STD_NTSC_443: + name="NTSC-443"; break; + case V4L2_STD_NTSC_M_KR: + name="NTSC-M-KR"; break; + case V4L2_STD_SECAM: + name="SECAM"; break; + case V4L2_STD_SECAM_DK: + name="SECAM-DK"; break; + case V4L2_STD_SECAM_B: + name="SECAM-B"; break; + case V4L2_STD_SECAM_D: + name="SECAM-D"; break; + case V4L2_STD_SECAM_G: + name="SECAM-G"; break; + case V4L2_STD_SECAM_H: + name="SECAM-H"; break; + case V4L2_STD_SECAM_K: + name="SECAM-K"; break; + case V4L2_STD_SECAM_K1: + name="SECAM-K1"; break; + case V4L2_STD_SECAM_L: + name="SECAM-L"; break; + case V4L2_STD_SECAM_LC: + name="SECAM-LC"; break; + default: + name="Unknown"; break; + } + + return name; +} + /* Fill in the fields of a v4l2_standard structure according to the 'id' and 'transmission' parameters. Returns negative on error. */ int v4l2_video_std_construct(struct v4l2_standard *vs, @@ -184,11 +256,13 @@ char *v4l2_field_names[] = { }; char *v4l2_type_names[] = { - [V4L2_BUF_TYPE_VIDEO_CAPTURE] = "video-cap", - [V4L2_BUF_TYPE_VIDEO_OVERLAY] = "video-over", - [V4L2_BUF_TYPE_VIDEO_OUTPUT] = "video-out", - [V4L2_BUF_TYPE_VBI_CAPTURE] = "vbi-cap", - [V4L2_BUF_TYPE_VBI_OUTPUT] = "vbi-out", + [V4L2_BUF_TYPE_VIDEO_CAPTURE] = "video-cap", + [V4L2_BUF_TYPE_VIDEO_OVERLAY] = "video-over", + [V4L2_BUF_TYPE_VIDEO_OUTPUT] = "video-out", + [V4L2_BUF_TYPE_VBI_CAPTURE] = "vbi-cap", + [V4L2_BUF_TYPE_VBI_OUTPUT] = "vbi-out", + [V4L2_BUF_TYPE_SLICED_VBI_CAPTURE] = "sliced-vbi-cap", + [V4L2_BUF_TYPE_SLICED_VBI_OUTPUT] = "slicec-vbi-out", }; static char *v4l2_memory_names[] = { @@ -1451,6 +1525,7 @@ u32 v4l2_ctrl_next(const u32 * const * ctrl_classes, u32 id) /* ----------------------------------------------------------------- */ +EXPORT_SYMBOL(v4l2_norm_to_name); EXPORT_SYMBOL(v4l2_video_std_construct); EXPORT_SYMBOL(v4l2_prio_init); diff --git a/drivers/media/video/video-buf-dvb.c b/drivers/media/video/video-buf-dvb.c index f53edf1923b..fcc5467e763 100644 --- a/drivers/media/video/video-buf-dvb.c +++ b/drivers/media/video/video-buf-dvb.c @@ -20,7 +20,7 @@ #include <linux/fs.h> #include <linux/kthread.h> #include <linux/file.h> -#include <linux/suspend.h> +#include <linux/freezer.h> #include <media/video-buf.h> #include <media/video-buf-dvb.h> diff --git a/drivers/media/video/videodev.c b/drivers/media/video/videodev.c index d424a4129d6..6a0e8ca7294 100644 --- a/drivers/media/video/videodev.c +++ b/drivers/media/video/videodev.c @@ -105,7 +105,7 @@ static DEFINE_MUTEX(videodev_lock); struct video_device* video_devdata(struct file *file) { - return video_device[iminor(file->f_dentry->d_inode)]; + return video_device[iminor(file->f_path.dentry->d_inode)]; } /* @@ -342,7 +342,7 @@ static void dbgbuf(unsigned int cmd, struct video_device *vfd, dbgarg (cmd, "%02ld:%02d:%02d.%08ld index=%d, type=%s, " "bytesused=%d, flags=0x%08d, " - "field=%0d, sequence=%d, memory=%s, offset/userptr=0x%08lx\n", + "field=%0d, sequence=%d, memory=%s, offset/userptr=0x%08lx, length=%d\n", (p->timestamp.tv_sec/3600), (int)(p->timestamp.tv_sec/60)%60, (int)(p->timestamp.tv_sec%60), @@ -352,7 +352,7 @@ static void dbgbuf(unsigned int cmd, struct video_device *vfd, p->bytesused,p->flags, p->field,p->sequence, prt_names(p->memory,v4l2_memory_names), - p->m.userptr); + p->m.userptr, p->length); dbgarg2 ("timecode= %02d:%02d:%02d type=%d, " "flags=0x%08d, frames=%d, userbits=0x%08x\n", tc->hours,tc->minutes,tc->seconds, @@ -369,9 +369,13 @@ static inline void dbgrect(struct video_device *vfd, char *s, static inline void v4l_print_pix_fmt (struct video_device *vfd, struct v4l2_pix_format *fmt) { - dbgarg2 ("width=%d, height=%d, format=0x%08x, field=%s, " + dbgarg2 ("width=%d, height=%d, format=%c%c%c%c, field=%s, " "bytesperline=%d sizeimage=%d, colorspace=%d\n", - fmt->width,fmt->height,fmt->pixelformat, + fmt->width,fmt->height, + (fmt->pixelformat & 0xff), + (fmt->pixelformat >> 8) & 0xff, + (fmt->pixelformat >> 16) & 0xff, + (fmt->pixelformat >> 24) & 0xff, prt_names(fmt->field,v4l2_field_names_FIXME), fmt->bytesperline,fmt->sizeimage,fmt->colorspace); }; @@ -428,6 +432,10 @@ static int __video_do_ioctl(struct inode *inode, struct file *file, v4l_print_ioctl(vfd->name, cmd); } + if (_IOC_TYPE(cmd)=='v') + return v4l_compat_translate_ioctl(inode,file,cmd,arg, + __video_do_ioctl); + switch(cmd) { /* --- capabilities ------------------------------------------ */ case VIDIOC_QUERYCAP: @@ -526,12 +534,13 @@ static int __video_do_ioctl(struct inode *inode, struct file *file, } if (!ret) dbgarg (cmd, "index=%d, type=%d, flags=%d, " - "description=%s," - " pixelformat=0x%8x\n", + "pixelformat=%c%c%c%c, description='%s'\n", f->index, f->type, f->flags, - f->description, - f->pixelformat); - + (f->pixelformat & 0xff), + (f->pixelformat >> 8) & 0xff, + (f->pixelformat >> 16) & 0xff, + (f->pixelformat >> 24) & 0xff, + f->description); break; } case VIDIOC_G_FMT: @@ -829,20 +838,85 @@ static int __video_do_ioctl(struct inode *inode, struct file *file, case VIDIOC_ENUMSTD: { struct v4l2_standard *p = arg; - unsigned int index = p->index; + v4l2_std_id id = vfd->tvnorms,curr_id=0; + unsigned int index = p->index,i; - if (!vfd->tvnormsize) { - printk (KERN_WARNING "%s: no TV norms defined!\n", - vfd->name); + if (index<0) { + ret=-EINVAL; break; } - if (index<0 || index >= vfd->tvnormsize) { - ret=-EINVAL; - break; + /* Return norm array on a canonical way */ + for (i=0;i<= index && id; i++) { + if ( (id & V4L2_STD_PAL) == V4L2_STD_PAL) { + curr_id = V4L2_STD_PAL; + } else if ( (id & V4L2_STD_PAL_BG) == V4L2_STD_PAL_BG) { + curr_id = V4L2_STD_PAL_BG; + } else if ( (id & V4L2_STD_PAL_DK) == V4L2_STD_PAL_DK) { + curr_id = V4L2_STD_PAL_DK; + } else if ( (id & V4L2_STD_PAL_B) == V4L2_STD_PAL_B) { + curr_id = V4L2_STD_PAL_B; + } else if ( (id & V4L2_STD_PAL_B1) == V4L2_STD_PAL_B1) { + curr_id = V4L2_STD_PAL_B1; + } else if ( (id & V4L2_STD_PAL_G) == V4L2_STD_PAL_G) { + curr_id = V4L2_STD_PAL_G; + } else if ( (id & V4L2_STD_PAL_H) == V4L2_STD_PAL_H) { + curr_id = V4L2_STD_PAL_H; + } else if ( (id & V4L2_STD_PAL_I) == V4L2_STD_PAL_I) { + curr_id = V4L2_STD_PAL_I; + } else if ( (id & V4L2_STD_PAL_D) == V4L2_STD_PAL_D) { + curr_id = V4L2_STD_PAL_D; + } else if ( (id & V4L2_STD_PAL_D1) == V4L2_STD_PAL_D1) { + curr_id = V4L2_STD_PAL_D1; + } else if ( (id & V4L2_STD_PAL_K) == V4L2_STD_PAL_K) { + curr_id = V4L2_STD_PAL_K; + } else if ( (id & V4L2_STD_PAL_M) == V4L2_STD_PAL_M) { + curr_id = V4L2_STD_PAL_M; + } else if ( (id & V4L2_STD_PAL_N) == V4L2_STD_PAL_N) { + curr_id = V4L2_STD_PAL_N; + } else if ( (id & V4L2_STD_PAL_Nc) == V4L2_STD_PAL_Nc) { + curr_id = V4L2_STD_PAL_Nc; + } else if ( (id & V4L2_STD_PAL_60) == V4L2_STD_PAL_60) { + curr_id = V4L2_STD_PAL_60; + } else if ( (id & V4L2_STD_NTSC) == V4L2_STD_NTSC) { + curr_id = V4L2_STD_NTSC; + } else if ( (id & V4L2_STD_NTSC_M) == V4L2_STD_NTSC_M) { + curr_id = V4L2_STD_NTSC_M; + } else if ( (id & V4L2_STD_NTSC_M_JP) == V4L2_STD_NTSC_M_JP) { + curr_id = V4L2_STD_NTSC_M_JP; + } else if ( (id & V4L2_STD_NTSC_443) == V4L2_STD_NTSC_443) { + curr_id = V4L2_STD_NTSC_443; + } else if ( (id & V4L2_STD_NTSC_M_KR) == V4L2_STD_NTSC_M_KR) { + curr_id = V4L2_STD_NTSC_M_KR; + } else if ( (id & V4L2_STD_SECAM) == V4L2_STD_SECAM) { + curr_id = V4L2_STD_SECAM; + } else if ( (id & V4L2_STD_SECAM_DK) == V4L2_STD_SECAM_DK) { + curr_id = V4L2_STD_SECAM_DK; + } else if ( (id & V4L2_STD_SECAM_B) == V4L2_STD_SECAM_B) { + curr_id = V4L2_STD_SECAM_B; + } else if ( (id & V4L2_STD_SECAM_D) == V4L2_STD_SECAM_D) { + curr_id = V4L2_STD_SECAM_D; + } else if ( (id & V4L2_STD_SECAM_G) == V4L2_STD_SECAM_G) { + curr_id = V4L2_STD_SECAM_G; + } else if ( (id & V4L2_STD_SECAM_H) == V4L2_STD_SECAM_H) { + curr_id = V4L2_STD_SECAM_H; + } else if ( (id & V4L2_STD_SECAM_K) == V4L2_STD_SECAM_K) { + curr_id = V4L2_STD_SECAM_K; + } else if ( (id & V4L2_STD_SECAM_K1) == V4L2_STD_SECAM_K1) { + curr_id = V4L2_STD_SECAM_K1; + } else if ( (id & V4L2_STD_SECAM_L) == V4L2_STD_SECAM_L) { + curr_id = V4L2_STD_SECAM_L; + } else if ( (id & V4L2_STD_SECAM_LC) == V4L2_STD_SECAM_LC) { + curr_id = V4L2_STD_SECAM_LC; + } else { + break; + } + id &= ~curr_id; } - v4l2_video_std_construct(p, vfd->tvnorms[p->index].id, - vfd->tvnorms[p->index].name); + if (i<=index) + return -EINVAL; + + v4l2_video_std_construct(p, curr_id,v4l2_norm_to_name(curr_id)); p->index = index; dbgarg (cmd, "index=%d, id=%Ld, name=%s, fps=%d/%d, " @@ -868,39 +942,23 @@ static int __video_do_ioctl(struct inode *inode, struct file *file, } case VIDIOC_S_STD: { - v4l2_std_id *id = arg; - unsigned int i; - - if (!vfd->tvnormsize) { - printk (KERN_WARNING "%s: no TV norms defined!\n", - vfd->name); - break; - } + v4l2_std_id *id = arg,norm; dbgarg (cmd, "value=%Lu\n", (long long unsigned) *id); - /* First search for exact match */ - for (i = 0; i < vfd->tvnormsize; i++) - if (*id == vfd->tvnorms[i].id) - break; - /* Then for a generic video std that contains desired std */ - if (i == vfd->tvnormsize) - for (i = 0; i < vfd->tvnormsize; i++) - if (*id & vfd->tvnorms[i].id) - break; - if (i == vfd->tvnormsize) { + norm = (*id) & vfd->tvnorms; + if ( vfd->tvnorms && !norm) /* Check if std is supported */ break; - } /* Calls the specific handler */ if (vfd->vidioc_s_std) - ret=vfd->vidioc_s_std(file, fh, i); + ret=vfd->vidioc_s_std(file, fh, &norm); else ret=-EINVAL; /* Updates standard information */ - if (!ret) - vfd->current_norm=*id; + if (ret>=0) + vfd->current_norm=norm; break; } @@ -1088,9 +1146,13 @@ static int __video_do_ioctl(struct inode *inode, struct file *file, case VIDIOC_G_AUDIO: { struct v4l2_audio *p=arg; + __u32 index=p->index; if (!vfd->vidioc_g_audio) break; + + memset(p,0,sizeof(*p)); + p->index=index; dbgarg(cmd, "Get for index=%d\n", p->index); ret=vfd->vidioc_g_audio(file, fh, p); if (!ret) @@ -1288,25 +1350,12 @@ static int __video_do_ioctl(struct inode *inode, struct file *file, ret=vfd->vidioc_g_parm(file, fh, p); } else { struct v4l2_standard s; - int i; - - if (!vfd->tvnormsize) { - printk (KERN_WARNING "%s: no TV norms defined!\n", - vfd->name); - break; - } if (p->type != V4L2_BUF_TYPE_VIDEO_CAPTURE) return -EINVAL; - for (i = 0; i < vfd->tvnormsize; i++) - if (vfd->tvnorms[i].id == vfd->current_norm) - break; - if (i >= vfd->tvnormsize) - return -EINVAL; - v4l2_video_std_construct(&s, vfd->current_norm, - vfd->tvnorms[i].name); + v4l2_norm_to_name(vfd->current_norm)); memset(p,0,sizeof(*p)); @@ -1329,8 +1378,14 @@ static int __video_do_ioctl(struct inode *inode, struct file *file, case VIDIOC_G_TUNER: { struct v4l2_tuner *p=arg; + __u32 index=p->index; + if (!vfd->vidioc_g_tuner) break; + + memset(p,0,sizeof(*p)); + p->index=index; + ret=vfd->vidioc_g_tuner(file, fh, p); if (!ret) dbgarg (cmd, "index=%d, name=%s, type=%d, " @@ -1363,6 +1418,9 @@ static int __video_do_ioctl(struct inode *inode, struct file *file, struct v4l2_frequency *p=arg; if (!vfd->vidioc_g_frequency) break; + + memset(p,0,sizeof(*p)); + ret=vfd->vidioc_g_frequency(file, fh, p); if (!ret) dbgarg (cmd, "tuner=%d, type=%d, frequency=%d\n", @@ -1396,12 +1454,7 @@ static int __video_do_ioctl(struct inode *inode, struct file *file, ret=vfd->vidioc_log_status(file, fh); break; } - - /* --- Others --------------------------------------------- */ - - default: - ret=v4l_compat_translate_ioctl(inode,file,cmd,arg,__video_do_ioctl); - } + } /* switch */ if (vfd->debug & V4L2_DEBUG_IOCTL_ARG) { if (ret<0) { diff --git a/drivers/media/video/vino.c b/drivers/media/video/vino.c index 6b6dff4d236..a373c142e74 100644 --- a/drivers/media/video/vino.c +++ b/drivers/media/video/vino.c @@ -782,7 +782,7 @@ static int vino_i2c_add_bus(void) static int vino_i2c_del_bus(void) { - return i2c_sgi_del_bus(&vino_i2c_adapter); + return i2c_del_adapter(&vino_i2c_adapter); } static int i2c_camera_command(unsigned int cmd, void *arg) diff --git a/drivers/media/video/vivi.c b/drivers/media/video/vivi.c index 3c8dc72dc8e..474ddb77964 100644 --- a/drivers/media/video/vivi.c +++ b/drivers/media/video/vivi.c @@ -36,6 +36,7 @@ #include <media/v4l2-common.h> #include <linux/kthread.h> #include <linux/highmem.h> +#include <linux/freezer.h> /* Wake up at about 30 fps */ #define WAKE_NUMERATOR 30 @@ -1043,16 +1044,8 @@ static int vidioc_streamoff(struct file *file, void *priv, enum v4l2_buf_type i) return (0); } -static struct v4l2_tvnorm tvnorms[] = { - { - .name = "NTSC-M", - .id = V4L2_STD_NTSC_M, - } -}; - -static int vidioc_s_std (struct file *file, void *priv, v4l2_std_id a) +static int vidioc_s_std (struct file *file, void *priv, v4l2_std_id *i) { - return 0; } @@ -1332,8 +1325,8 @@ static struct video_device vivi = { #ifdef CONFIG_VIDEO_V4L1_COMPAT .vidiocgmbuf = vidiocgmbuf, #endif - .tvnorms = tvnorms, - .tvnormsize = ARRAY_SIZE(tvnorms), + .tvnorms = V4L2_STD_NTSC_M, + .current_norm = V4L2_STD_NTSC_M, }; /* ----------------------------------------------------------------- Initialization and module stuff @@ -1360,8 +1353,6 @@ static int __init vivi_init(void) dev->vidq.timeout.data = (unsigned long)dev; init_timer(&dev->vidq.timeout); - vivi.current_norm = tvnorms[0].id; - ret = video_register_device(&vivi, VFL_TYPE_GRABBER, video_nr); printk(KERN_INFO "Video Technology Magazine Virtual Video Capture Board (Load status: %d)\n", ret); return ret; diff --git a/drivers/media/video/zc0301/zc0301_core.c b/drivers/media/video/zc0301/zc0301_core.c index 5b556342442..52d0f759ee0 100644 --- a/drivers/media/video/zc0301/zc0301_core.c +++ b/drivers/media/video/zc0301/zc0301_core.c @@ -489,7 +489,7 @@ static int zc0301_start_transfer(struct zc0301_device* cam) return 0; free_urbs: - for (i = 0; (i < ZC0301_URBS) && cam->urb[i]; i++) + for (i = 0; i < ZC0301_URBS; i++) usb_free_urb(cam->urb[i]); free_buffers: diff --git a/drivers/media/video/zoran_card.c b/drivers/media/video/zoran_card.c index 653822ce391..4d1eb2fba34 100644 --- a/drivers/media/video/zoran_card.c +++ b/drivers/media/video/zoran_card.c @@ -849,7 +849,7 @@ zoran_register_i2c (struct zoran *zr) static void zoran_unregister_i2c (struct zoran *zr) { - i2c_bit_del_bus((&zr->i2c_adapter)); + i2c_del_adapter(&zr->i2c_adapter); } /* Check a zoran_params struct for correctness, insert default params */ diff --git a/drivers/media/video/zoran_procfs.c b/drivers/media/video/zoran_procfs.c index c7f6f648836..c374c76b375 100644 --- a/drivers/media/video/zoran_procfs.c +++ b/drivers/media/video/zoran_procfs.c @@ -144,7 +144,7 @@ static int zoran_open(struct inode *inode, struct file *file) static ssize_t zoran_write(struct file *file, const char __user *buffer, size_t count, loff_t *ppos) { - struct zoran *zr = PDE(file->f_dentry->d_inode)->data; + struct zoran *zr = PDE(file->f_path.dentry->d_inode)->data; char *string, *sp; char *line, *ldelim, *varname, *svar, *tdelim; @@ -165,7 +165,7 @@ static ssize_t zoran_write(struct file *file, const char __user *buffer, } string[count] = 0; dprintk(4, KERN_INFO "%s: write_proc: name=%s count=%zu zr=%p\n", - ZR_DEVNAME(zr), file->f_dentry->d_name.name, count, zr); + ZR_DEVNAME(zr), file->f_path.dentry->d_name.name, count, zr); ldelim = " \t\n"; tdelim = "="; line = strpbrk(sp, ldelim); diff --git a/drivers/media/video/zr36120.c b/drivers/media/video/zr36120.c deleted file mode 100644 index 0cbf564388a..00000000000 --- a/drivers/media/video/zr36120.c +++ /dev/null @@ -1,2079 +0,0 @@ -/* - zr36120.c - Zoran 36120/36125 based framegrabbers - - Copyright (C) 1998-1999 Pauline Middelink <middelin@polyware.nl> - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 2 of the License, or - (at your option) any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program; if not, write to the Free Software - Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. -*/ - -#include <linux/module.h> -#include <linux/delay.h> -#include <linux/init.h> -#include <linux/errno.h> -#include <linux/fs.h> -#include <linux/kernel.h> -#include <linux/major.h> -#include <linux/slab.h> -#include <linux/vmalloc.h> -#include <linux/mm.h> -#include <linux/pci.h> -#include <linux/signal.h> -#include <linux/wait.h> -#include <asm/io.h> -#include <asm/pgtable.h> -#include <asm/page.h> -#include <linux/sched.h> -#include <linux/video_decoder.h> - -#include <asm/uaccess.h> - -#include "tuner.h" -#include "zr36120.h" -#include "zr36120_mem.h" - -/* mark an required function argument unused - lintism */ -#define UNUSED(x) (void)(x) - -/* sensible default */ -#ifndef CARDTYPE -#define CARDTYPE 0 -#endif - -/* Anybody who uses more than four? */ -#define ZORAN_MAX 4 - -static unsigned int triton1=0; /* triton1 chipset? */ -static unsigned int cardtype[ZORAN_MAX]={ [ 0 ... ZORAN_MAX-1 ] = CARDTYPE }; -static int video_nr = -1; -static int vbi_nr = -1; - -static struct pci_device_id zr36120_pci_tbl[] = { - { PCI_VENDOR_ID_ZORAN,PCI_DEVICE_ID_ZORAN_36120, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, - { 0 } -}; -MODULE_DEVICE_TABLE(pci, zr36120_pci_tbl); - -MODULE_AUTHOR("Pauline Middelink <middelin@polyware.nl>"); -MODULE_DESCRIPTION("Zoran ZR36120 based framegrabber"); -MODULE_LICENSE("GPL"); - -module_param(triton1, uint, 0); -module_param_array(cardtype, uint, NULL, 0); -module_param(video_nr, int, 0); -module_param(vbi_nr, int, 0); - -static int zoran_cards; -static struct zoran zorans[ZORAN_MAX]; - -/* - * the meaning of each element can be found in zr36120.h - * Determining the value of gpdir/gpval can be tricky. The - * best way is to run the card under the original software - * and read the values from the general purpose registers - * 0x28 and 0x2C. How you do that is left as an exercise - * to the impatient reader :) - */ -#define T 1 /* to separate the bools from the ints */ -#define F 0 -static struct tvcard tvcards[] = { - /* reported working by <middelin@polyware.nl> */ -/*0*/ { "Trust Victor II", - 2, 0, T, T, T, T, 0x7F, 0x80, { 1, SVHS(6) }, { 0 } }, - /* reported working by <Michael.Paxton@aihw.gov.au> */ -/*1*/ { "Aitech WaveWatcher TV-PCI", - 3, 0, T, F, T, T, 0x7F, 0x80, { 1, TUNER(3), SVHS(6) }, { 0 } }, - /* reported working by ? */ -/*2*/ { "Genius Video Wonder PCI Video Capture Card", - 2, 0, T, T, T, T, 0x7F, 0x80, { 1, SVHS(6) }, { 0 } }, - /* reported working by <Pascal.Gabriel@wanadoo.fr> */ -/*3*/ { "Guillemot Maxi-TV PCI", - 2, 0, T, T, T, T, 0x7F, 0x80, { 1, SVHS(6) }, { 0 } }, - /* reported working by "Craig Whitmore <lennon@igrin.co.nz> */ -/*4*/ { "Quadrant Buster", - 3, 3, T, F, T, T, 0x7F, 0x80, { SVHS(1), TUNER(2), 3 }, { 1, 2, 3 } }, - /* a debug entry which has all inputs mapped */ -/*5*/ { "ZR36120 based framegrabber (all inputs enabled)", - 6, 0, T, T, T, T, 0x7F, 0x80, { 1, 2, 3, 4, 5, 6 }, { 0 } } -}; -#undef T -#undef F -#define NRTVCARDS (sizeof(tvcards)/sizeof(tvcards[0])) - -#ifdef __sparc__ -#define ENDIANESS 0 -#else -#define ENDIANESS ZORAN_VFEC_LE -#endif - -static struct { const char name[8]; uint mode; uint bpp; } palette2fmt[] = { -/* n/a */ { "n/a", 0, 0 }, -/* GREY */ { "GRAY", 0, 0 }, -/* HI240 */ { "HI240", 0, 0 }, -/* RGB565 */ { "RGB565", ZORAN_VFEC_RGB_RGB565|ENDIANESS, 2 }, -/* RGB24 */ { "RGB24", ZORAN_VFEC_RGB_RGB888|ENDIANESS|ZORAN_VFEC_PACK24, 3 }, -/* RGB32 */ { "RGB32", ZORAN_VFEC_RGB_RGB888|ENDIANESS, 4 }, -/* RGB555 */ { "RGB555", ZORAN_VFEC_RGB_RGB555|ENDIANESS, 2 }, -/* YUV422 */ { "YUV422", ZORAN_VFEC_RGB_YUV422|ENDIANESS, 2 }, -/* YUYV */ { "YUYV", 0, 0 }, -/* UYVY */ { "UYVY", 0, 0 }, -/* YUV420 */ { "YUV420", 0, 0 }, -/* YUV411 */ { "YUV411", 0, 0 }, -/* RAW */ { "RAW", 0, 0 }, -/* YUV422P */ { "YUV422P", 0, 0 }, -/* YUV411P */ { "YUV411P", 0, 0 }}; -#define NRPALETTES (sizeof(palette2fmt)/sizeof(palette2fmt[0])) -#undef ENDIANESS - -/* ----------------------------------------------------------------------- */ -/* ZORAN chipset detector */ -/* shamelessly stolen from bttv.c */ -/* Reason for beeing here: we need to detect if we are running on a */ -/* Triton based chipset, and if so, enable a certain bit */ -/* ----------------------------------------------------------------------- */ -static -void __init handle_chipset(void) -{ - /* Just in case some nut set this to something dangerous */ - if (triton1) - triton1 = ZORAN_VDC_TRICOM; - - if (pci_pci_problems & PCIPCI_TRITON) { - printk(KERN_INFO "zoran: Host bridge 82437FX Triton PIIX\n"); - triton1 = ZORAN_VDC_TRICOM; - } -} - -/* ----------------------------------------------------------------------- */ -/* ZORAN functions */ -/* ----------------------------------------------------------------------- */ - -static void zoran_set_geo(struct zoran* ztv, struct vidinfo* i); - -#if 0 /* unused */ -static -void zoran_dump(struct zoran *ztv) -{ - char str[256]; - char *p=str; /* shut up, gcc! */ - int i; - - for (i=0; i<0x60; i+=4) { - if ((i % 16) == 0) { - if (i) printk("%s\n",str); - p = str; - p+= sprintf(str, KERN_DEBUG " %04x: ",i); - } - p += sprintf(p, "%08x ",zrread(i)); - } -} -#endif /* unused */ - -static -void reap_states(struct zoran* ztv) -{ - /* count frames */ - ztv->fieldnr++; - - /* - * Are we busy at all? - * This depends on if there is a workqueue AND the - * videotransfer is enabled on the chip... - */ - if (ztv->workqueue && (zrread(ZORAN_VDC) & ZORAN_VDC_VIDEN)) - { - struct vidinfo* newitem; - - /* did we get a complete frame? */ - if (zrread(ZORAN_VSTR) & ZORAN_VSTR_GRAB) - return; - -DEBUG(printk(CARD_DEBUG "completed %s at %p\n",CARD,ztv->workqueue->kindof==FBUFFER_GRAB?"grab":"read",ztv->workqueue)); - - /* we are done with this buffer, tell everyone */ - ztv->workqueue->status = FBUFFER_DONE; - ztv->workqueue->fieldnr = ztv->fieldnr; - /* not good, here for BTTV_FIELDNR reasons */ - ztv->lastfieldnr = ztv->fieldnr; - - switch (ztv->workqueue->kindof) { - case FBUFFER_GRAB: - wake_up_interruptible(&ztv->grabq); - break; - case FBUFFER_VBI: - wake_up_interruptible(&ztv->vbiq); - break; - default: - printk(CARD_INFO "somebody killed the workqueue (kindof=%d)!\n",CARD,ztv->workqueue->kindof); - } - - /* item completed, skip to next item in queue */ - write_lock(&ztv->lock); - newitem = ztv->workqueue->next; - ztv->workqueue->next = 0; /* mark completed */ - ztv->workqueue = newitem; - write_unlock(&ztv->lock); - } - - /* - * ok, so it seems we have nothing in progress right now. - * Lets see if we can find some work. - */ - if (ztv->workqueue) - { - struct vidinfo* newitem; -again: - -DEBUG(printk(CARD_DEBUG "starting %s at %p\n",CARD,ztv->workqueue->kindof==FBUFFER_GRAB?"grab":"read",ztv->workqueue)); - - /* loadup the frame settings */ - read_lock(&ztv->lock); - zoran_set_geo(ztv,ztv->workqueue); - read_unlock(&ztv->lock); - - switch (ztv->workqueue->kindof) { - case FBUFFER_GRAB: - case FBUFFER_VBI: - zrand(~ZORAN_OCR_OVLEN, ZORAN_OCR); - zror(ZORAN_VSTR_SNAPSHOT,ZORAN_VSTR); - zror(ZORAN_VDC_VIDEN,ZORAN_VDC); - - /* start single-shot grab */ - zror(ZORAN_VSTR_GRAB, ZORAN_VSTR); - break; - default: - printk(CARD_INFO "what is this doing on the queue? (kindof=%d)\n",CARD,ztv->workqueue->kindof); - write_lock(&ztv->lock); - newitem = ztv->workqueue->next; - ztv->workqueue->next = 0; - ztv->workqueue = newitem; - write_unlock(&ztv->lock); - if (newitem) - goto again; /* yeah, sure.. */ - } - /* bye for now */ - return; - } -DEBUG(printk(CARD_DEBUG "nothing in queue\n",CARD)); - - /* - * What? Even the workqueue is empty? Am i really here - * for nothing? Did i come all that way to... do nothing? - */ - - /* do we need to overlay? */ - if (test_bit(STATE_OVERLAY, &ztv->state)) - { - /* are we already overlaying? */ - if (!(zrread(ZORAN_OCR) & ZORAN_OCR_OVLEN) || - !(zrread(ZORAN_VDC) & ZORAN_VDC_VIDEN)) - { -DEBUG(printk(CARD_DEBUG "starting overlay\n",CARD)); - - read_lock(&ztv->lock); - zoran_set_geo(ztv,&ztv->overinfo); - read_unlock(&ztv->lock); - - zror(ZORAN_OCR_OVLEN, ZORAN_OCR); - zrand(~ZORAN_VSTR_SNAPSHOT,ZORAN_VSTR); - zror(ZORAN_VDC_VIDEN,ZORAN_VDC); - } - - /* - * leave overlaying on, but turn interrupts off. - */ - zrand(~ZORAN_ICR_EN,ZORAN_ICR); - return; - } - - /* do we have any VBI idle time processing? */ - if (test_bit(STATE_VBI, &ztv->state)) - { - struct vidinfo* item; - struct vidinfo* lastitem; - - /* protect the workqueue */ - write_lock(&ztv->lock); - lastitem = ztv->workqueue; - if (lastitem) - while (lastitem->next) lastitem = lastitem->next; - for (item=ztv->readinfo; item!=ztv->readinfo+ZORAN_VBI_BUFFERS; item++) - if (item->next == 0 && item->status == FBUFFER_FREE) - { -DEBUG(printk(CARD_DEBUG "%p added to queue\n",CARD,item)); - item->status = FBUFFER_BUSY; - if (!lastitem) - ztv->workqueue = item; - else - lastitem->next = item; - lastitem = item; - } - write_unlock(&ztv->lock); - if (ztv->workqueue) - goto again; /* hey, _i_ graduated :) */ - } - - /* - * Then we must be realy IDLE - */ -DEBUG(printk(CARD_DEBUG "turning off\n",CARD)); - /* nothing further to do, disable DMA and further IRQs */ - zrand(~ZORAN_VDC_VIDEN,ZORAN_VDC); - zrand(~ZORAN_ICR_EN,ZORAN_ICR); -} - -static -void zoran_irq(int irq, void *dev_id) -{ - u32 stat,estat; - int count = 0; - struct zoran *ztv = dev_id; - - UNUSED(irq); - for (;;) { - /* get/clear interrupt status bits */ - stat=zrread(ZORAN_ISR); - estat=stat & zrread(ZORAN_ICR); - if (!estat) - return; - zrwrite(estat,ZORAN_ISR); - IDEBUG(printk(CARD_DEBUG "estat %08x\n",CARD,estat)); - IDEBUG(printk(CARD_DEBUG " stat %08x\n",CARD,stat)); - - if (estat & ZORAN_ISR_CODE) - { - IDEBUG(printk(CARD_DEBUG "CodReplIRQ\n",CARD)); - } - if (estat & ZORAN_ISR_GIRQ0) - { - IDEBUG(printk(CARD_DEBUG "GIRQ0\n",CARD)); - if (!ztv->card->usegirq1) - reap_states(ztv); - } - if (estat & ZORAN_ISR_GIRQ1) - { - IDEBUG(printk(CARD_DEBUG "GIRQ1\n",CARD)); - if (ztv->card->usegirq1) - reap_states(ztv); - } - - count++; - if (count > 10) - printk(CARD_ERR "irq loop %d (%x)\n",CARD,count,estat); - if (count > 20) - { - zrwrite(0, ZORAN_ICR); - printk(CARD_ERR "IRQ lockup, cleared int mask\n",CARD); - } - } -} - -static -int zoran_muxsel(struct zoran* ztv, int channel, int norm) -{ - int rv; - - /* set the new video norm */ - rv = i2c_control_device(&(ztv->i2c), I2C_DRIVERID_VIDEODECODER, DECODER_SET_NORM, &norm); - if (rv) - return rv; - ztv->norm = norm; - - /* map the given channel to the cards decoder's channel */ - channel = ztv->card->video_mux[channel] & CHANNEL_MASK; - - /* set the new channel */ - rv = i2c_control_device(&(ztv->i2c), I2C_DRIVERID_VIDEODECODER, DECODER_SET_INPUT, &channel); - return rv; -} - -/* Tell the interrupt handler what to to. */ -static -void zoran_cap(struct zoran* ztv, int on) -{ -DEBUG(printk(CARD_DEBUG "zoran_cap(%d) state=%x\n",CARD,on,ztv->state)); - - if (on) { - ztv->running = 1; - - /* - * turn interrupts (back) on. The DMA will be enabled - * inside the irq handler when it detects a restart. - */ - zror(ZORAN_ICR_EN,ZORAN_ICR); - } - else { - /* - * turn both interrupts and DMA off - */ - zrand(~ZORAN_VDC_VIDEN,ZORAN_VDC); - zrand(~ZORAN_ICR_EN,ZORAN_ICR); - - ztv->running = 0; - } -} - -static ulong dmask[] = { - 0xFFFFFFFF, 0xFFFFFFFE, 0xFFFFFFFC, 0xFFFFFFF8, - 0xFFFFFFF0, 0xFFFFFFE0, 0xFFFFFFC0, 0xFFFFFF80, - 0xFFFFFF00, 0xFFFFFE00, 0xFFFFFC00, 0xFFFFF800, - 0xFFFFF000, 0xFFFFE000, 0xFFFFC000, 0xFFFF8000, - 0xFFFF0000, 0xFFFE0000, 0xFFFC0000, 0xFFF80000, - 0xFFF00000, 0xFFE00000, 0xFFC00000, 0xFF800000, - 0xFF000000, 0xFE000000, 0xFC000000, 0xF8000000, - 0xF0000000, 0xE0000000, 0xC0000000, 0x80000000 -}; - -static -void zoran_built_overlay(struct zoran* ztv, int count, struct video_clip *vcp) -{ - ulong* mtop; - int ystep = (ztv->vidXshift + ztv->vidWidth+31)/32; /* next DWORD */ - int i; - -DEBUG(printk(KERN_DEBUG " overlay at %p, ystep=%d, clips=%d\n",ztv->overinfo.overlay,ystep,count)); - - for (i=0; i<count; i++) { - struct video_clip *vp = vcp+i; - UNUSED(vp); -DEBUG(printk(KERN_DEBUG " %d: clip(%d,%d,%d,%d)\n", i,vp->x,vp->y,vp->width,vp->height)); - } - - /* - * activate the visible portion of the screen - * Note we take some shortcuts here, because we - * know the width can never be < 32. (I.e. a DWORD) - * We also assume the overlay starts somewhere in - * the FIRST dword. - */ - { - int start = ztv->vidXshift; - ulong firstd = dmask[start]; - ulong lastd = ~dmask[(start + ztv->overinfo.w) & 31]; - mtop = ztv->overinfo.overlay; - for (i=0; i<ztv->overinfo.h; i++) { - int w = ztv->vidWidth; - ulong* line = mtop; - if (start & 31) { - *line++ = firstd; - w -= 32-(start&31); - } - memset(line, ~0, w/8); - if (w & 31) - line[w/32] = lastd; - mtop += ystep; - } - } - - /* process clipping regions */ - for (i=0; i<count; i++) { - int h; - if (vcp->x < 0 || (uint)vcp->x > ztv->overinfo.w || - vcp->y < 0 || vcp->y > ztv->overinfo.h || - vcp->width < 0 || (uint)(vcp->x+vcp->width) > ztv->overinfo.w || - vcp->height < 0 || (vcp->y+vcp->height) > ztv->overinfo.h) - { - DEBUG(printk(CARD_DEBUG "invalid clipzone (%d,%d,%d,%d) not in (0,0,%d,%d), adapting\n",CARD,vcp->x,vcp->y,vcp->width,vcp->height,ztv->overinfo.w,ztv->overinfo.h)); - if (vcp->x < 0) vcp->x = 0; - if ((uint)vcp->x > ztv->overinfo.w) vcp->x = ztv->overinfo.w; - if (vcp->y < 0) vcp->y = 0; - if (vcp->y > ztv->overinfo.h) vcp->y = ztv->overinfo.h; - if (vcp->width < 0) vcp->width = 0; - if ((uint)(vcp->x+vcp->width) > ztv->overinfo.w) vcp->width = ztv->overinfo.w - vcp->x; - if (vcp->height < 0) vcp->height = 0; - if (vcp->y+vcp->height > ztv->overinfo.h) vcp->height = ztv->overinfo.h - vcp->y; -// continue; - } - - mtop = &ztv->overinfo.overlay[vcp->y*ystep]; - for (h=0; h<=vcp->height; h++) { - int w; - int x = ztv->vidXshift + vcp->x; - for (w=0; w<=vcp->width; w++) { - clear_bit(x&31, &mtop[x/32]); - x++; - } - mtop += ystep; - } - ++vcp; - } - - mtop = ztv->overinfo.overlay; - zrwrite(virt_to_bus(mtop), ZORAN_MTOP); - zrwrite(virt_to_bus(mtop+ystep), ZORAN_MBOT); - zraor((ztv->vidInterlace*ystep)<<0,~ZORAN_OCR_MASKSTRIDE,ZORAN_OCR); -} - -struct tvnorm -{ - u16 Wt, Wa, Ht, Ha, HStart, VStart; -}; - -static struct tvnorm tvnorms[] = { - /* PAL-BDGHI */ -/* { 864, 720, 625, 576, 131, 21 },*/ -/*00*/ { 864, 768, 625, 576, 81, 17 }, - /* NTSC */ -/*01*/ { 858, 720, 525, 480, 121, 10 }, - /* SECAM */ -/*02*/ { 864, 720, 625, 576, 131, 21 }, - /* BW50 */ -/*03*/ { 864, 720, 625, 576, 131, 21 }, - /* BW60 */ -/*04*/ { 858, 720, 525, 480, 121, 10 } -}; -#define TVNORMS (sizeof(tvnorms)/sizeof(tvnorm)) - -/* - * Program the chip for a setup as described in the vidinfo struct. - * - * Side-effects: calculates vidXshift, vidInterlace, - * vidHeight, vidWidth which are used in a later stage - * to calculate the overlay mask - * - * This is an internal function, as such it does not check the - * validity of the struct members... Spectaculair crashes will - * follow /very/ quick when you're wrong and the chip right :) - */ -static -void zoran_set_geo(struct zoran* ztv, struct vidinfo* i) -{ - ulong top, bot; - int stride; - int winWidth, winHeight; - int maxWidth, maxHeight, maxXOffset, maxYOffset; - long vfec; - -DEBUG(printk(CARD_DEBUG "set_geo(rect=(%d,%d,%d,%d), norm=%d, format=%d, bpp=%d, bpl=%d, busadr=%lx, overlay=%p)\n",CARD,i->x,i->y,i->w,i->h,ztv->norm,i->format,i->bpp,i->bpl,i->busadr,i->overlay)); - - /* - * make sure the DMA transfers are inhibited during our - * reprogramming of the chip - */ - zrand(~ZORAN_VDC_VIDEN,ZORAN_VDC); - - maxWidth = tvnorms[ztv->norm].Wa; - maxHeight = tvnorms[ztv->norm].Ha/2; - maxXOffset = tvnorms[ztv->norm].HStart; - maxYOffset = tvnorms[ztv->norm].VStart; - - /* setup vfec register (keep ExtFl,TopField and VCLKPol settings) */ - vfec = (zrread(ZORAN_VFEC) & (ZORAN_VFEC_EXTFL|ZORAN_VFEC_TOPFIELD|ZORAN_VFEC_VCLKPOL)) | - (palette2fmt[i->format].mode & (ZORAN_VFEC_RGB|ZORAN_VFEC_ERRDIF|ZORAN_VFEC_LE|ZORAN_VFEC_PACK24)); - - /* - * Set top, bottom ptrs. Since these must be DWORD aligned, - * possible adjust the x and the width of the window. - * so the endposition stay the same. The vidXshift will make - * sure we are not writing pixels before the requested x. - */ - ztv->vidXshift = 0; - winWidth = i->w; - if (winWidth < 0) - winWidth = -winWidth; - top = i->busadr + i->x*i->bpp + i->y*i->bpl; - if (top & 3) { - ztv->vidXshift = (top & 3) / i->bpp; - winWidth += ztv->vidXshift; - DEBUG(printk(KERN_DEBUG " window-x shifted %d pixels left\n",ztv->vidXshift)); - top &= ~3; - } - - /* - * bottom points to next frame but in interleaved mode we want - * to 'mix' the 2 frames to one capture, so 'bot' points to one - * (physical) line below the top line. - */ - bot = top + i->bpl; - zrwrite(top,ZORAN_VTOP); - zrwrite(bot,ZORAN_VBOT); - - /* - * Make sure the winWidth is DWORD aligned too, - * thereby automaticly making sure the stride to the - * next line is DWORD aligned too (as required by spec). - */ - if ((winWidth*i->bpp) & 3) { -DEBUG(printk(KERN_DEBUG " window-width enlarged by %d pixels\n",(winWidth*i->bpp) & 3)); - winWidth += (winWidth*i->bpp) & 3; - } - - /* determine the DispMode and stride */ - if (i->h >= 0 && i->h <= maxHeight) { - /* single frame grab suffices for this height. */ - vfec |= ZORAN_VFEC_DISPMOD; - ztv->vidInterlace = 0; - stride = i->bpl - (winWidth*i->bpp); - winHeight = i->h; - } - else { - /* interleaving needed for this height */ - ztv->vidInterlace = 1; - stride = i->bpl*2 - (winWidth*i->bpp); - winHeight = i->h/2; - } - if (winHeight < 0) /* can happen for VBI! */ - winHeight = -winHeight; - - /* safety net, sometimes bpl is too short??? */ - if (stride<0) { -DEBUG(printk(CARD_DEBUG "WARNING stride = %d\n",CARD,stride)); - stride = 0; - } - - zraor((winHeight<<12)|(winWidth<<0),~(ZORAN_VDC_VIDWINHT|ZORAN_VDC_VIDWINWID), ZORAN_VDC); - zraor(stride<<16,~ZORAN_VSTR_DISPSTRIDE,ZORAN_VSTR); - - /* remember vidWidth, vidHeight for overlay calculations */ - ztv->vidWidth = winWidth; - ztv->vidHeight = winHeight; -DEBUG(printk(KERN_DEBUG " top=%08lx, bottom=%08lx\n",top,bot)); -DEBUG(printk(KERN_DEBUG " winWidth=%d, winHeight=%d\n",winWidth,winHeight)); -DEBUG(printk(KERN_DEBUG " maxWidth=%d, maxHeight=%d\n",maxWidth,maxHeight)); -DEBUG(printk(KERN_DEBUG " stride=%d\n",stride)); - - /* - * determine horizontal scales and crops - */ - if (i->w < 0) { - int Hstart = 1; - int Hend = Hstart + winWidth; -DEBUG(printk(KERN_DEBUG " Y: scale=0, start=%d, end=%d\n", Hstart, Hend)); - zraor((Hstart<<10)|(Hend<<0),~(ZORAN_VFEH_HSTART|ZORAN_VFEH_HEND),ZORAN_VFEH); - } - else { - int Wa = maxWidth; - int X = (winWidth*64+Wa-1)/Wa; - int We = winWidth*64/X; - int HorDcm = 64-X; - int hcrop1 = 2*(Wa-We)/4; - /* - * BUGFIX: Juha Nurmela <junki@qn-lpr2-165.quicknet.inet.fi> - * found the solution to the color phase shift. - * See ChangeLog for the full explanation) - */ - int Hstart = (maxXOffset + hcrop1) | 1; - int Hend = Hstart + We - 1; - -DEBUG(printk(KERN_DEBUG " X: scale=%d, start=%d, end=%d\n", HorDcm, Hstart, Hend)); - - zraor((Hstart<<10)|(Hend<<0),~(ZORAN_VFEH_HSTART|ZORAN_VFEH_HEND),ZORAN_VFEH); - vfec |= HorDcm<<14; - - if (HorDcm<16) - vfec |= ZORAN_VFEC_HFILTER_1; /* no filter */ - else if (HorDcm<32) - vfec |= ZORAN_VFEC_HFILTER_3; /* 3 tap filter */ - else if (HorDcm<48) - vfec |= ZORAN_VFEC_HFILTER_4; /* 4 tap filter */ - else vfec |= ZORAN_VFEC_HFILTER_5; /* 5 tap filter */ - } - - /* - * Determine vertical scales and crops - * - * when height is negative, we want to read starting at line 0 - * One day someone might need access to these lines... - */ - if (i->h < 0) { - int Vstart = 0; - int Vend = Vstart + winHeight; -DEBUG(printk(KERN_DEBUG " Y: scale=0, start=%d, end=%d\n", Vstart, Vend)); - zraor((Vstart<<10)|(Vend<<0),~(ZORAN_VFEV_VSTART|ZORAN_VFEV_VEND),ZORAN_VFEV); - } - else { - int Ha = maxHeight; - int Y = (winHeight*64+Ha-1)/Ha; - int He = winHeight*64/Y; - int VerDcm = 64-Y; - int vcrop1 = 2*(Ha-He)/4; - int Vstart = maxYOffset + vcrop1; - int Vend = Vstart + He - 1; - -DEBUG(printk(KERN_DEBUG " Y: scale=%d, start=%d, end=%d\n", VerDcm, Vstart, Vend)); - zraor((Vstart<<10)|(Vend<<0),~(ZORAN_VFEV_VSTART|ZORAN_VFEV_VEND),ZORAN_VFEV); - vfec |= VerDcm<<8; - } - -DEBUG(printk(KERN_DEBUG " F: format=%d(=%s)\n",i->format,palette2fmt[i->format].name)); - - /* setup the requested format */ - zrwrite(vfec, ZORAN_VFEC); -} - -static -void zoran_common_open(struct zoran* ztv, int flags) -{ - UNUSED(flags); - - /* already opened? */ - if (ztv->users++ != 0) - return; - - /* unmute audio */ - /* /what/ audio? */ - - ztv->state = 0; - - /* setup the encoder to the initial values */ - ztv->picture.colour=254<<7; - ztv->picture.brightness=128<<8; - ztv->picture.hue=128<<8; - ztv->picture.contrast=216<<7; - i2c_control_device(&ztv->i2c, I2C_DRIVERID_VIDEODECODER, DECODER_SET_PICTURE, &ztv->picture); - - /* default to the composite input since my camera is there */ - zoran_muxsel(ztv, 0, VIDEO_MODE_PAL); -} - -static -void zoran_common_close(struct zoran* ztv) -{ - if (--ztv->users != 0) - return; - - /* mute audio */ - /* /what/ audio? */ - - /* stop the chip */ - zoran_cap(ztv, 0); -} - -/* - * Open a zoran card. Right now the flags are just a hack - */ -static int zoran_open(struct video_device *dev, int flags) -{ - struct zoran *ztv = (struct zoran*)dev; - struct vidinfo* item; - char* pos; - - DEBUG(printk(CARD_DEBUG "open(dev,%d)\n",CARD,flags)); - - /********************************************* - * We really should be doing lazy allocing... - *********************************************/ - /* allocate a frame buffer */ - if (!ztv->fbuffer) - ztv->fbuffer = bmalloc(ZORAN_MAX_FBUFSIZE); - if (!ztv->fbuffer) { - /* could not get a buffer, bail out */ - return -ENOBUFS; - } - /* at this time we _always_ have a framebuffer */ - memset(ztv->fbuffer,0,ZORAN_MAX_FBUFSIZE); - - if (!ztv->overinfo.overlay) - ztv->overinfo.overlay = kmalloc(1024*1024/8, GFP_KERNEL); - if (!ztv->overinfo.overlay) { - /* could not get an overlay buffer, bail out */ - bfree(ztv->fbuffer, ZORAN_MAX_FBUFSIZE); - return -ENOBUFS; - } - /* at this time we _always_ have a overlay */ - - /* clear buffer status, and give them a DMAable address */ - pos = ztv->fbuffer; - for (item=ztv->grabinfo; item!=ztv->grabinfo+ZORAN_MAX_FBUFFERS; item++) - { - item->status = FBUFFER_FREE; - item->memadr = pos; - item->busadr = virt_to_bus(pos); - pos += ZORAN_MAX_FBUFFER; - } - - /* do the common part of all open's */ - zoran_common_open(ztv, flags); - - return 0; -} - -static -void zoran_close(struct video_device* dev) -{ - struct zoran *ztv = (struct zoran*)dev; - - DEBUG(printk(CARD_DEBUG "close(dev)\n",CARD)); - - /* driver specific closure */ - clear_bit(STATE_OVERLAY, &ztv->state); - - zoran_common_close(ztv); - - /* - * This is sucky but right now I can't find a good way to - * be sure its safe to free the buffer. We wait 5-6 fields - * which is more than sufficient to be sure. - */ - msleep(100); /* Wait 1/10th of a second */ - - /* free the allocated framebuffer */ - bfree(ztv->fbuffer, ZORAN_MAX_FBUFSIZE); - ztv->fbuffer = 0; - kfree(ztv->overinfo.overlay); - ztv->overinfo.overlay = 0; - -} - -/* - * This read function could be used reentrant in a SMP situation. - * - * This is made possible by the spinlock which is kept till we - * found and marked a buffer for our own use. The lock must - * be released as soon as possible to prevent lock contention. - */ -static -long zoran_read(struct video_device* dev, char* buf, unsigned long count, int nonblock) -{ - struct zoran *ztv = (struct zoran*)dev; - unsigned long max; - struct vidinfo* unused = 0; - struct vidinfo* done = 0; - - DEBUG(printk(CARD_DEBUG "zoran_read(%p,%ld,%d)\n",CARD,buf,count,nonblock)); - - /* find ourself a free or completed buffer */ - for (;;) { - struct vidinfo* item; - - write_lock_irq(&ztv->lock); - for (item=ztv->grabinfo; item!=ztv->grabinfo+ZORAN_MAX_FBUFFERS; item++) - { - if (!unused && item->status == FBUFFER_FREE) - unused = item; - if (!done && item->status == FBUFFER_DONE) - done = item; - } - if (done || unused) - break; - - /* no more free buffers, wait for them. */ - write_unlock_irq(&ztv->lock); - if (nonblock) - return -EWOULDBLOCK; - interruptible_sleep_on(&ztv->grabq); - if (signal_pending(current)) - return -EINTR; - } - - /* Do we have 'ready' data? */ - if (!done) { - /* no? than this will take a while... */ - if (nonblock) { - write_unlock_irq(&ztv->lock); - return -EWOULDBLOCK; - } - - /* mark the unused buffer as wanted */ - unused->status = FBUFFER_BUSY; - unused->w = 320; - unused->h = 240; - unused->format = VIDEO_PALETTE_RGB24; - unused->bpp = palette2fmt[unused->format].bpp; - unused->bpl = unused->w * unused->bpp; - unused->next = 0; - { /* add to tail of queue */ - struct vidinfo* oldframe = ztv->workqueue; - if (!oldframe) ztv->workqueue = unused; - else { - while (oldframe->next) oldframe = oldframe->next; - oldframe->next = unused; - } - } - write_unlock_irq(&ztv->lock); - - /* tell the state machine we want it filled /NOW/ */ - zoran_cap(ztv, 1); - - /* wait till this buffer gets grabbed */ - wait_event_interruptible(ztv->grabq, - (unused->status != FBUFFER_BUSY)); - /* see if a signal did it */ - if (signal_pending(current)) - return -EINTR; - done = unused; - } - else - write_unlock_irq(&ztv->lock); - - /* Yes! we got data! */ - max = done->bpl * done->h; - if (count > max) - count = max; - if (copy_to_user((void*)buf, done->memadr, count)) - count = -EFAULT; - - /* keep the engine running */ - done->status = FBUFFER_FREE; -// zoran_cap(ztv,1); - - /* tell listeners this buffer became free */ - wake_up_interruptible(&ztv->grabq); - - /* goodbye */ - DEBUG(printk(CARD_DEBUG "zoran_read() returns %lu\n",CARD,count)); - return count; -} - -static -long zoran_write(struct video_device* dev, const char* buf, unsigned long count, int nonblock) -{ - struct zoran *ztv = (struct zoran *)dev; - UNUSED(ztv); UNUSED(dev); UNUSED(buf); UNUSED(count); UNUSED(nonblock); - DEBUG(printk(CARD_DEBUG "zoran_write\n",CARD)); - return -EINVAL; -} - -static -unsigned int zoran_poll(struct video_device *dev, struct file *file, poll_table *wait) -{ - struct zoran *ztv = (struct zoran *)dev; - struct vidinfo* item; - unsigned int mask = 0; - - poll_wait(file, &ztv->grabq, wait); - - for (item=ztv->grabinfo; item!=ztv->grabinfo+ZORAN_MAX_FBUFFERS; item++) - if (item->status == FBUFFER_DONE) - { - mask |= (POLLIN | POLLRDNORM); - break; - } - - DEBUG(printk(CARD_DEBUG "zoran_poll()=%x\n",CARD,mask)); - - return mask; -} - -/* append a new clipregion to the vector of video_clips */ -static -void new_clip(struct video_window* vw, struct video_clip* vcp, int x, int y, int w, int h) -{ - vcp[vw->clipcount].x = x; - vcp[vw->clipcount].y = y; - vcp[vw->clipcount].width = w; - vcp[vw->clipcount].height = h; - vw->clipcount++; -} - -static -int zoran_ioctl(struct video_device* dev, unsigned int cmd, void *arg) -{ - struct zoran* ztv = (struct zoran*)dev; - - switch (cmd) { - case VIDIOCGCAP: - { - struct video_capability c; - DEBUG(printk(CARD_DEBUG "VIDIOCGCAP\n",CARD)); - - strcpy(c.name,ztv->video_dev.name); - c.type = VID_TYPE_CAPTURE| - VID_TYPE_OVERLAY| - VID_TYPE_CLIPPING| - VID_TYPE_FRAMERAM| - VID_TYPE_SCALES; - if (ztv->have_tuner) - c.type |= VID_TYPE_TUNER; - if (pci_problems & (PCIPCI_FAIL|PCIAGP_FAIL)) - c.type &= ~VID_TYPE_OVERLAY; - if (ztv->have_decoder) { - c.channels = ztv->card->video_inputs; - c.audios = ztv->card->audio_inputs; - } else - /* no decoder -> no channels */ - c.channels = c.audios = 0; - c.maxwidth = 768; - c.maxheight = 576; - c.minwidth = 32; - c.minheight = 32; - if (copy_to_user(arg,&c,sizeof(c))) - return -EFAULT; - break; - } - - case VIDIOCGCHAN: - { - struct video_channel v; - int mux; - if (copy_from_user(&v, arg,sizeof(v))) - return -EFAULT; - DEBUG(printk(CARD_DEBUG "VIDIOCGCHAN(%d)\n",CARD,v.channel)); - v.flags=VIDEO_VC_AUDIO -#ifdef VIDEO_VC_NORM - |VIDEO_VC_NORM -#endif - ; - v.tuners=0; - v.type=VIDEO_TYPE_CAMERA; -#ifdef I_EXPECT_POSSIBLE_NORMS_IN_THE_API - v.norm=VIDEO_MODE_PAL| - VIDEO_MODE_NTSC| - VIDEO_MODE_SECAM; -#else - v.norm=VIDEO_MODE_PAL; -#endif - /* too many inputs? no decoder -> no channels */ - if (!ztv->have_decoder || v.channel < 0 || v.channel >= ztv->card->video_inputs) - return -EINVAL; - - /* now determine the name of the channel */ - mux = ztv->card->video_mux[v.channel]; - if (mux & IS_TUNER) { - /* lets assume only one tuner, yes? */ - strcpy(v.name,"Television"); - v.type = VIDEO_TYPE_TV; - if (ztv->have_tuner) { - v.flags |= VIDEO_VC_TUNER; - v.tuners = 1; - } - } - else if (mux & IS_SVHS) - sprintf(v.name,"S-Video-%d",v.channel); - else - sprintf(v.name,"CVBS-%d",v.channel); - - if (copy_to_user(arg,&v,sizeof(v))) - return -EFAULT; - break; - } - case VIDIOCSCHAN: - { /* set video channel */ - struct video_channel v; - if (copy_from_user(&v, arg,sizeof(v))) - return -EFAULT; - DEBUG(printk(CARD_DEBUG "VIDIOCSCHAN(%d,%d)\n",CARD,v.channel,v.norm)); - - /* too many inputs? no decoder -> no channels */ - if (!ztv->have_decoder || v.channel >= ztv->card->video_inputs || v.channel < 0) - return -EINVAL; - - if (v.norm != VIDEO_MODE_PAL && - v.norm != VIDEO_MODE_NTSC && - v.norm != VIDEO_MODE_SECAM && - v.norm != VIDEO_MODE_AUTO) - return -EOPNOTSUPP; - - /* make it happen, nr1! */ - return zoran_muxsel(ztv,v.channel,v.norm); - } - - case VIDIOCGTUNER: - { - struct video_tuner v; - if (copy_from_user(&v, arg,sizeof(v))) - return -EFAULT; - DEBUG(printk(CARD_DEBUG "VIDIOCGTUNER(%d)\n",CARD,v.tuner)); - - /* Only no or one tuner for now */ - if (!ztv->have_tuner || v.tuner) - return -EINVAL; - - strcpy(v.name,"Television"); - v.rangelow = 0; - v.rangehigh = ~0; - v.flags = VIDEO_TUNER_PAL|VIDEO_TUNER_NTSC|VIDEO_TUNER_SECAM; - v.mode = ztv->norm; - v.signal = 0xFFFF; /* unknown */ - - if (copy_to_user(arg,&v,sizeof(v))) - return -EFAULT; - break; - } - case VIDIOCSTUNER: - { - struct video_tuner v; - if (copy_from_user(&v, arg, sizeof(v))) - return -EFAULT; - DEBUG(printk(CARD_DEBUG "VIDIOCSTUNER(%d,%d)\n",CARD,v.tuner,v.mode)); - - /* Only no or one tuner for now */ - if (!ztv->have_tuner || v.tuner) - return -EINVAL; - - /* and it only has certain valid modes */ - if( v.mode != VIDEO_MODE_PAL && - v.mode != VIDEO_MODE_NTSC && - v.mode != VIDEO_MODE_SECAM) - return -EOPNOTSUPP; - - /* engage! */ - return zoran_muxsel(ztv,v.tuner,v.mode); - } - - case VIDIOCGPICT: - { - struct video_picture p = ztv->picture; - DEBUG(printk(CARD_DEBUG "VIDIOCGPICT\n",CARD)); - p.depth = ztv->depth; - switch (p.depth) { - case 8: p.palette=VIDEO_PALETTE_YUV422; - break; - case 15: p.palette=VIDEO_PALETTE_RGB555; - break; - case 16: p.palette=VIDEO_PALETTE_RGB565; - break; - case 24: p.palette=VIDEO_PALETTE_RGB24; - break; - case 32: p.palette=VIDEO_PALETTE_RGB32; - break; - } - if (copy_to_user(arg, &p, sizeof(p))) - return -EFAULT; - break; - } - case VIDIOCSPICT: - { - struct video_picture p; - if (copy_from_user(&p, arg,sizeof(p))) - return -EFAULT; - DEBUG(printk(CARD_DEBUG "VIDIOCSPICT(%d,%d,%d,%d,%d,%d,%d)\n",CARD,p.brightness,p.hue,p.colour,p.contrast,p.whiteness,p.depth,p.palette)); - - /* depth must match with framebuffer */ - if (p.depth != ztv->depth) - return -EINVAL; - - /* check if palette matches this bpp */ - if (p.palette>NRPALETTES || - palette2fmt[p.palette].bpp != ztv->overinfo.bpp) - return -EINVAL; - - write_lock_irq(&ztv->lock); - ztv->overinfo.format = p.palette; - ztv->picture = p; - write_unlock_irq(&ztv->lock); - - /* tell the decoder */ - i2c_control_device(&ztv->i2c, I2C_DRIVERID_VIDEODECODER, DECODER_SET_PICTURE, &p); - break; - } - - case VIDIOCGWIN: - { - struct video_window vw; - DEBUG(printk(CARD_DEBUG "VIDIOCGWIN\n",CARD)); - read_lock(&ztv->lock); - vw.x = ztv->overinfo.x; - vw.y = ztv->overinfo.y; - vw.width = ztv->overinfo.w; - vw.height = ztv->overinfo.h; - vw.chromakey= 0; - vw.flags = 0; - if (ztv->vidInterlace) - vw.flags|=VIDEO_WINDOW_INTERLACE; - read_unlock(&ztv->lock); - if (copy_to_user(arg,&vw,sizeof(vw))) - return -EFAULT; - break; - } - case VIDIOCSWIN: - { - struct video_window vw; - struct video_clip *vcp; - int on; - if (copy_from_user(&vw,arg,sizeof(vw))) - return -EFAULT; - DEBUG(printk(CARD_DEBUG "VIDIOCSWIN(%d,%d,%d,%d,%x,%d)\n",CARD,vw.x,vw.y,vw.width,vw.height,vw.flags,vw.clipcount)); - - if (vw.flags) - return -EINVAL; - - if (vw.clipcount <0 || vw.clipcount>256) - return -EDOM; /* Too many! */ - - /* - * Do any clips. - */ - vcp = vmalloc(sizeof(struct video_clip)*(vw.clipcount+4)); - if (vcp==NULL) - return -ENOMEM; - if (vw.clipcount && copy_from_user(vcp,vw.clips,sizeof(struct video_clip)*vw.clipcount)) { - vfree(vcp); - return -EFAULT; - } - - on = ztv->running; - if (on) - zoran_cap(ztv, 0); - - /* - * strange, it seems xawtv sometimes calls us with 0 - * width and/or height. Ignore these values - */ - if (vw.x == 0) - vw.x = ztv->overinfo.x; - if (vw.y == 0) - vw.y = ztv->overinfo.y; - - /* by now we are committed to the new data... */ - write_lock_irq(&ztv->lock); - ztv->overinfo.x = vw.x; - ztv->overinfo.y = vw.y; - ztv->overinfo.w = vw.width; - ztv->overinfo.h = vw.height; - write_unlock_irq(&ztv->lock); - - /* - * Impose display clips - */ - if (vw.x+vw.width > ztv->swidth) - new_clip(&vw, vcp, ztv->swidth-vw.x, 0, vw.width-1, vw.height-1); - if (vw.y+vw.height > ztv->sheight) - new_clip(&vw, vcp, 0, ztv->sheight-vw.y, vw.width-1, vw.height-1); - - /* built the requested clipping zones */ - zoran_set_geo(ztv, &ztv->overinfo); - zoran_built_overlay(ztv, vw.clipcount, vcp); - vfree(vcp); - - /* if we were on, restart the video engine */ - if (on) - zoran_cap(ztv, 1); - break; - } - - case VIDIOCCAPTURE: - { - int v; - if (get_user(v, (int *)arg)) - return -EFAULT; - DEBUG(printk(CARD_DEBUG "VIDIOCCAPTURE(%d)\n",CARD,v)); - - if (v==0) { - clear_bit(STATE_OVERLAY, &ztv->state); - zoran_cap(ztv, 1); - } - else { - /* is VIDIOCSFBUF, VIDIOCSWIN done? */ - if (ztv->overinfo.busadr==0 || ztv->overinfo.w==0 || ztv->overinfo.h==0) - return -EINVAL; - - set_bit(STATE_OVERLAY, &ztv->state); - zoran_cap(ztv, 1); - } - break; - } - - case VIDIOCGFBUF: - { - struct video_buffer v; - DEBUG(printk(CARD_DEBUG "VIDIOCGFBUF\n",CARD)); - read_lock(&ztv->lock); - v.base = (void *)ztv->overinfo.busadr; - v.height = ztv->sheight; - v.width = ztv->swidth; - v.depth = ztv->depth; - v.bytesperline = ztv->overinfo.bpl; - read_unlock(&ztv->lock); - if(copy_to_user(arg, &v,sizeof(v))) - return -EFAULT; - break; - } - case VIDIOCSFBUF: - { - struct video_buffer v; - if(!capable(CAP_SYS_ADMIN)) - return -EPERM; - if (pcipci_problems & (PCIPCI_FAIL|PCIAGP_FAIL)) - return -ENXIO; - if (copy_from_user(&v, arg,sizeof(v))) - return -EFAULT; - DEBUG(printk(CARD_DEBUG "VIDIOCSFBUF(%p,%d,%d,%d,%d)\n",CARD,v.base, v.width,v.height,v.depth,v.bytesperline)); - - if (v.depth!=15 && v.depth!=16 && v.depth!=24 && v.depth!=32) - return -EINVAL; - if (v.bytesperline<1) - return -EINVAL; - if (ztv->running) - return -EBUSY; - write_lock_irq(&ztv->lock); - ztv->overinfo.busadr = (ulong)v.base; - ztv->sheight = v.height; - ztv->swidth = v.width; - ztv->depth = v.depth; /* bits per pixel */ - ztv->overinfo.bpp = ((v.depth+1)&0x38)/8;/* bytes per pixel */ - ztv->overinfo.bpl = v.bytesperline; /* bytes per line */ - write_unlock_irq(&ztv->lock); - break; - } - - case VIDIOCKEY: - { - /* Will be handled higher up .. */ - break; - } - - case VIDIOCSYNC: - { - int i; - if (get_user(i, (int *) arg)) - return -EFAULT; - DEBUG(printk(CARD_DEBUG "VIDEOCSYNC(%d)\n",CARD,i)); - if (i<0 || i>ZORAN_MAX_FBUFFERS) - return -EINVAL; - switch (ztv->grabinfo[i].status) { - case FBUFFER_FREE: - return -EINVAL; - case FBUFFER_BUSY: - /* wait till this buffer gets grabbed */ - wait_event_interruptible(ztv->grabq, - (ztv->grabinfo[i].status != FBUFFER_BUSY)); - /* see if a signal did it */ - if (signal_pending(current)) - return -EINTR; - /* don't fall through; a DONE buffer is not UNUSED */ - break; - case FBUFFER_DONE: - ztv->grabinfo[i].status = FBUFFER_FREE; - /* tell ppl we have a spare buffer */ - wake_up_interruptible(&ztv->grabq); - break; - } - DEBUG(printk(CARD_DEBUG "VIDEOCSYNC(%d) returns\n",CARD,i)); - break; - } - - case VIDIOCMCAPTURE: - { - struct video_mmap vm; - struct vidinfo* frame; - if (copy_from_user(&vm,arg,sizeof(vm))) - return -EFAULT; - DEBUG(printk(CARD_DEBUG "VIDIOCMCAPTURE(%d,(%d,%d),%d)\n",CARD,vm.frame,vm.width,vm.height,vm.format)); - if (vm.frame<0 || vm.frame>ZORAN_MAX_FBUFFERS || - vm.width<32 || vm.width>768 || - vm.height<32 || vm.height>576 || - vm.format>NRPALETTES || - palette2fmt[vm.format].mode == 0) - return -EINVAL; - - /* we are allowed to take over UNUSED and DONE buffers */ - frame = &ztv->grabinfo[vm.frame]; - if (frame->status == FBUFFER_BUSY) - return -EBUSY; - - /* setup the other parameters if they are given */ - write_lock_irq(&ztv->lock); - frame->w = vm.width; - frame->h = vm.height; - frame->format = vm.format; - frame->bpp = palette2fmt[frame->format].bpp; - frame->bpl = frame->w*frame->bpp; - frame->status = FBUFFER_BUSY; - frame->next = 0; - { /* add to tail of queue */ - struct vidinfo* oldframe = ztv->workqueue; - if (!oldframe) ztv->workqueue = frame; - else { - while (oldframe->next) oldframe = oldframe->next; - oldframe->next = frame; - } - } - write_unlock_irq(&ztv->lock); - zoran_cap(ztv, 1); - break; - } - - case VIDIOCGMBUF: - { - struct video_mbuf mb; - int i; - DEBUG(printk(CARD_DEBUG "VIDIOCGMBUF\n",CARD)); - mb.size = ZORAN_MAX_FBUFSIZE; - mb.frames = ZORAN_MAX_FBUFFERS; - for (i=0; i<ZORAN_MAX_FBUFFERS; i++) - mb.offsets[i] = i*ZORAN_MAX_FBUFFER; - if(copy_to_user(arg, &mb,sizeof(mb))) - return -EFAULT; - break; - } - - case VIDIOCGUNIT: - { - struct video_unit vu; - DEBUG(printk(CARD_DEBUG "VIDIOCGUNIT\n",CARD)); - vu.video = ztv->video_dev.minor; - vu.vbi = ztv->vbi_dev.minor; - vu.radio = VIDEO_NO_UNIT; - vu.audio = VIDEO_NO_UNIT; - vu.teletext = VIDEO_NO_UNIT; - if(copy_to_user(arg, &vu,sizeof(vu))) - return -EFAULT; - break; - } - - case VIDIOCGFREQ: - { - unsigned long v = ztv->tuner_freq; - if (copy_to_user(arg,&v,sizeof(v))) - return -EFAULT; - DEBUG(printk(CARD_DEBUG "VIDIOCGFREQ\n",CARD)); - break; - } - case VIDIOCSFREQ: - { - unsigned long v; - if (copy_from_user(&v, arg, sizeof(v))) - return -EFAULT; - DEBUG(printk(CARD_DEBUG "VIDIOCSFREQ\n",CARD)); - - if (ztv->have_tuner) { - int fixme = v; - if (i2c_control_device(&(ztv->i2c), I2C_DRIVERID_TUNER, TUNER_SET_TVFREQ, &fixme) < 0) - return -EAGAIN; - } - ztv->tuner_freq = v; - break; - } - - /* Why isn't this in the API? - * And why doesn't it take a buffer number? - case BTTV_FIELDNR: - { - unsigned long v = ztv->lastfieldnr; - if (copy_to_user(arg,&v,sizeof(v))) - return -EFAULT; - DEBUG(printk(CARD_DEBUG "BTTV_FIELDNR\n",CARD)); - break; - } - */ - - default: - return -ENOIOCTLCMD; - } - return 0; -} - -static -int zoran_mmap(struct vm_area_struct *vma, struct video_device* dev, const char* adr, unsigned long size) -{ - struct zoran* ztv = (struct zoran*)dev; - unsigned long start = (unsigned long)adr; - unsigned long pos; - - DEBUG(printk(CARD_DEBUG "zoran_mmap(0x%p,%ld)\n",CARD,adr,size)); - - /* sanity checks */ - if (size > ZORAN_MAX_FBUFSIZE || !ztv->fbuffer) - return -EINVAL; - - /* start mapping the whole shabang to user memory */ - pos = (unsigned long)ztv->fbuffer; - while (size>0) { - unsigned long pfn = virt_to_phys((void*)pos) >> PAGE_SHIFT; - if (remap_pfn_range(vma, start, pfn, PAGE_SIZE, PAGE_SHARED)) - return -EAGAIN; - start += PAGE_SIZE; - pos += PAGE_SIZE; - size -= PAGE_SIZE; - } - return 0; -} - -static struct video_device zr36120_template= -{ - .owner = THIS_MODULE, - .name = "UNSET", - .type = VID_TYPE_TUNER|VID_TYPE_CAPTURE|VID_TYPE_OVERLAY, - .hardware = VID_HARDWARE_ZR36120, - .open = zoran_open, - .close = zoran_close, - .read = zoran_read, - .write = zoran_write, - .poll = zoran_poll, - .ioctl = zoran_ioctl, - .compat_ioctl = v4l_compat_ioctl32, - .mmap = zoran_mmap, - .minor = -1, -}; - -static -int vbi_open(struct video_device *dev, int flags) -{ - struct zoran *ztv = dev->priv; - struct vidinfo* item; - - DEBUG(printk(CARD_DEBUG "vbi_open(dev,%d)\n",CARD,flags)); - - /* - * During VBI device open, we continiously grab VBI-like - * data in the vbi buffer when we have nothing to do. - * Only when there is an explicit request for VBI data - * (read call) we /force/ a read. - */ - - /* allocate buffers */ - for (item=ztv->readinfo; item!=ztv->readinfo+ZORAN_VBI_BUFFERS; item++) - { - item->status = FBUFFER_FREE; - - /* alloc */ - if (!item->memadr) { - item->memadr = bmalloc(ZORAN_VBI_BUFSIZE); - if (!item->memadr) { - /* could not get a buffer, bail out */ - while (item != ztv->readinfo) { - item--; - bfree(item->memadr, ZORAN_VBI_BUFSIZE); - item->memadr = 0; - item->busadr = 0; - } - return -ENOBUFS; - } - } - - /* determine the DMAable address */ - item->busadr = virt_to_bus(item->memadr); - } - - /* do the common part of all open's */ - zoran_common_open(ztv, flags); - - set_bit(STATE_VBI, &ztv->state); - /* start read-ahead */ - zoran_cap(ztv, 1); - - return 0; -} - -static -void vbi_close(struct video_device *dev) -{ - struct zoran *ztv = dev->priv; - struct vidinfo* item; - - DEBUG(printk(CARD_DEBUG "vbi_close(dev)\n",CARD)); - - /* driver specific closure */ - clear_bit(STATE_VBI, &ztv->state); - - zoran_common_close(ztv); - - /* - * This is sucky but right now I can't find a good way to - * be sure its safe to free the buffer. We wait 5-6 fields - * which is more than sufficient to be sure. - */ - msleep(100); /* Wait 1/10th of a second */ - - for (item=ztv->readinfo; item!=ztv->readinfo+ZORAN_VBI_BUFFERS; item++) - { - if (item->memadr) - bfree(item->memadr, ZORAN_VBI_BUFSIZE); - item->memadr = 0; - } - -} - -/* - * This read function could be used reentrant in a SMP situation. - * - * This is made possible by the spinlock which is kept till we - * found and marked a buffer for our own use. The lock must - * be released as soon as possible to prevent lock contention. - */ -static -long vbi_read(struct video_device* dev, char* buf, unsigned long count, int nonblock) -{ - struct zoran *ztv = dev->priv; - unsigned long max; - struct vidinfo* unused = 0; - struct vidinfo* done = 0; - - DEBUG(printk(CARD_DEBUG "vbi_read(0x%p,%ld,%d)\n",CARD,buf,count,nonblock)); - - /* find ourself a free or completed buffer */ - for (;;) { - struct vidinfo* item; - - write_lock_irq(&ztv->lock); - for (item=ztv->readinfo; item!=ztv->readinfo+ZORAN_VBI_BUFFERS; item++) { - if (!unused && item->status == FBUFFER_FREE) - unused = item; - if (!done && item->status == FBUFFER_DONE) - done = item; - } - if (done || unused) - break; - - /* no more free buffers, wait for them. */ - write_unlock_irq(&ztv->lock); - if (nonblock) - return -EWOULDBLOCK; - interruptible_sleep_on(&ztv->vbiq); - if (signal_pending(current)) - return -EINTR; - } - - /* Do we have 'ready' data? */ - if (!done) { - /* no? than this will take a while... */ - if (nonblock) { - write_unlock_irq(&ztv->lock); - return -EWOULDBLOCK; - } - - /* mark the unused buffer as wanted */ - unused->status = FBUFFER_BUSY; - unused->next = 0; - { /* add to tail of queue */ - struct vidinfo* oldframe = ztv->workqueue; - if (!oldframe) ztv->workqueue = unused; - else { - while (oldframe->next) oldframe = oldframe->next; - oldframe->next = unused; - } - } - write_unlock_irq(&ztv->lock); - - /* tell the state machine we want it filled /NOW/ */ - zoran_cap(ztv, 1); - - /* wait till this buffer gets grabbed */ - wait_event_interruptible(ztv->vbiq, - (unused->status != FBUFFER_BUSY)); - /* see if a signal did it */ - if (signal_pending(current)) - return -EINTR; - done = unused; - } - else - write_unlock_irq(&ztv->lock); - - /* Yes! we got data! */ - max = done->bpl * -done->h; - if (count > max) - count = max; - - /* check if the user gave us enough room to write the data */ - if (!access_ok(VERIFY_WRITE, buf, count)) { - count = -EFAULT; - goto out; - } - - /* - * Now transform/strip the data from YUV to Y-only - * NB. Assume the Y is in the LSB of the YUV data. - */ - { - unsigned char* optr = buf; - unsigned char* eptr = buf+count; - - /* are we beeing accessed from an old driver? */ - if (count == 2*19*2048) { - /* - * Extreme HACK, old VBI programs expect 2048 points - * of data, and we only got 864 orso. Double each - * datapoint and clear the rest of the line. - * This way we have appear to have a - * sample_frequency of 29.5 Mc. - */ - int x,y; - unsigned char* iptr = done->memadr+1; - for (y=done->h; optr<eptr && y<0; y++) - { - /* copy to doubled data to userland */ - for (x=0; optr+1<eptr && x<-done->w; x++) - { - unsigned char a = iptr[x*2]; - __put_user(a, optr++); - __put_user(a, optr++); - } - /* and clear the rest of the line */ - for (x*=2; optr<eptr && x<done->bpl; x++) - __put_user(0, optr++); - /* next line */ - iptr += done->bpl; - } - } - else { - /* - * Other (probably newer) programs asked - * us what geometry we are using, and are - * reading the correct size. - */ - int x,y; - unsigned char* iptr = done->memadr+1; - for (y=done->h; optr<eptr && y<0; y++) - { - /* copy to doubled data to userland */ - for (x=0; optr<eptr && x<-done->w; x++) - __put_user(iptr[x*2], optr++); - /* and clear the rest of the line */ - for (;optr<eptr && x<done->bpl; x++) - __put_user(0, optr++); - /* next line */ - iptr += done->bpl; - } - } - - /* API compliance: - * place the framenumber (half fieldnr) in the last long - */ - __put_user(done->fieldnr/2, ((ulong*)eptr)[-1]); - } - - /* keep the engine running */ - done->status = FBUFFER_FREE; - zoran_cap(ztv, 1); - - /* tell listeners this buffer just became free */ - wake_up_interruptible(&ztv->vbiq); - - /* goodbye */ -out: - DEBUG(printk(CARD_DEBUG "vbi_read() returns %lu\n",CARD,count)); - return count; -} - -static -unsigned int vbi_poll(struct video_device *dev, struct file *file, poll_table *wait) -{ - struct zoran *ztv = dev->priv; - struct vidinfo* item; - unsigned int mask = 0; - - poll_wait(file, &ztv->vbiq, wait); - - for (item=ztv->readinfo; item!=ztv->readinfo+ZORAN_VBI_BUFFERS; item++) - if (item->status == FBUFFER_DONE) - { - mask |= (POLLIN | POLLRDNORM); - break; - } - - DEBUG(printk(CARD_DEBUG "vbi_poll()=%x\n",CARD,mask)); - - return mask; -} - -static -int vbi_ioctl(struct video_device *dev, unsigned int cmd, void *arg) -{ - struct zoran* ztv = dev->priv; - - switch (cmd) { - case VIDIOCGVBIFMT: - { - struct vbi_format f; - DEBUG(printk(CARD_DEBUG "VIDIOCGVBIINFO\n",CARD)); - f.sampling_rate = 14750000UL; - f.samples_per_line = -ztv->readinfo[0].w; - f.sample_format = VIDEO_PALETTE_RAW; - f.start[0] = f.start[1] = ztv->readinfo[0].y; - f.start[1] += 312; - f.count[0] = f.count[1] = -ztv->readinfo[0].h; - f.flags = VBI_INTERLACED; - if (copy_to_user(arg,&f,sizeof(f))) - return -EFAULT; - break; - } - case VIDIOCSVBIFMT: - { - struct vbi_format f; - int i; - if (copy_from_user(&f, arg,sizeof(f))) - return -EFAULT; - DEBUG(printk(CARD_DEBUG "VIDIOCSVBIINFO(%d,%d,%d,%d,%d,%d,%d,%x)\n",CARD,f.sampling_rate,f.samples_per_line,f.sample_format,f.start[0],f.start[1],f.count[0],f.count[1],f.flags)); - - /* lots of parameters are fixed... (PAL) */ - if (f.sampling_rate != 14750000UL || - f.samples_per_line > 864 || - f.sample_format != VIDEO_PALETTE_RAW || - f.start[0] < 0 || - f.start[0] != f.start[1]-312 || - f.count[0] != f.count[1] || - f.start[0]+f.count[0] >= 288 || - f.flags != VBI_INTERLACED) - return -EINVAL; - - write_lock_irq(&ztv->lock); - ztv->readinfo[0].y = f.start[0]; - ztv->readinfo[0].w = -f.samples_per_line; - ztv->readinfo[0].h = -f.count[0]; - ztv->readinfo[0].bpl = f.samples_per_line*ztv->readinfo[0].bpp; - for (i=1; i<ZORAN_VBI_BUFFERS; i++) - ztv->readinfo[i] = ztv->readinfo[i]; - write_unlock_irq(&ztv->lock); - break; - } - default: - return -ENOIOCTLCMD; - } - return 0; -} - -static struct video_device vbi_template= -{ - .owner = THIS_MODULE, - .name = "UNSET", - .type = VID_TYPE_CAPTURE|VID_TYPE_TELETEXT, - .hardware = VID_HARDWARE_ZR36120, - .open = vbi_open, - .close = vbi_close, - .read = vbi_read, - .write = zoran_write, - .poll = vbi_poll, - .ioctl = vbi_ioctl, - .minor = -1, -}; - -/* - * Scan for a Zoran chip, request the irq and map the io memory - */ -static -int __init find_zoran(void) -{ - int result; - struct zoran *ztv; - struct pci_dev *dev = NULL; - unsigned char revision; - int zoran_num = 0; - - while ((dev = pci_get_device(PCI_VENDOR_ID_ZORAN,PCI_DEVICE_ID_ZORAN_36120, dev))) - { - /* Ok, a ZR36120/ZR36125 found! */ - ztv = &zorans[zoran_num]; - ztv->dev = dev; - - if (pci_enable_device(dev)) - continue; - - pci_read_config_byte(dev, PCI_CLASS_REVISION, &revision); - printk(KERN_INFO "zoran: Zoran %x (rev %d) ", - dev->device, revision); - printk("bus: %d, devfn: %d, irq: %d, ", - dev->bus->number, dev->devfn, dev->irq); - printk("memory: 0x%08lx.\n", ztv->zoran_adr); - - ztv->zoran_mem = ioremap(ztv->zoran_adr, 0x1000); - DEBUG(printk(KERN_DEBUG "zoran: mapped-memory at 0x%p\n",ztv->zoran_mem)); - - result = request_irq(dev->irq, zoran_irq, - IRQF_SHARED|IRQF_DISABLED,"zoran", ztv); - if (result==-EINVAL) - { - iounmap(ztv->zoran_mem); - printk(KERN_ERR "zoran: Bad irq number or handler\n"); - continue; - } - if (result==-EBUSY) - printk(KERN_ERR "zoran: IRQ %d busy, change your PnP config in BIOS\n",dev->irq); - if (result < 0) { - iounmap(ztv->zoran_mem); - continue; - } - /* Enable bus-mastering */ - pci_set_master(dev); - /* Keep a reference */ - pci_dev_get(dev); - zoran_num++; - } - if(zoran_num) - printk(KERN_INFO "zoran: %d Zoran card(s) found.\n",zoran_num); - return zoran_num; -} - -static -int __init init_zoran(int card) -{ - struct zoran *ztv = &zorans[card]; - int i; - - /* if the given cardtype valid? */ - if (cardtype[card]>=NRTVCARDS) { - printk(KERN_INFO "invalid cardtype(%d) detected\n",cardtype[card]); - return -1; - } - - /* reset the zoran */ - zrand(~ZORAN_PCI_SOFTRESET,ZORAN_PCI); - udelay(10); - zror(ZORAN_PCI_SOFTRESET,ZORAN_PCI); - udelay(10); - - /* zoran chip specific details */ - ztv->card = tvcards+cardtype[card]; /* point to the selected card */ - ztv->norm = 0; /* PAL */ - ztv->tuner_freq = 0; - - /* videocard details */ - ztv->swidth = 800; - ztv->sheight = 600; - ztv->depth = 16; - - /* State details */ - ztv->fbuffer = 0; - ztv->overinfo.kindof = FBUFFER_OVERLAY; - ztv->overinfo.status = FBUFFER_FREE; - ztv->overinfo.x = 0; - ztv->overinfo.y = 0; - ztv->overinfo.w = 768; /* 640 */ - ztv->overinfo.h = 576; /* 480 */ - ztv->overinfo.format = VIDEO_PALETTE_RGB565; - ztv->overinfo.bpp = palette2fmt[ztv->overinfo.format].bpp; - ztv->overinfo.bpl = ztv->overinfo.bpp*ztv->swidth; - ztv->overinfo.busadr = 0; - ztv->overinfo.memadr = 0; - ztv->overinfo.overlay = 0; - for (i=0; i<ZORAN_MAX_FBUFFERS; i++) { - ztv->grabinfo[i] = ztv->overinfo; - ztv->grabinfo[i].kindof = FBUFFER_GRAB; - } - init_waitqueue_head(&ztv->grabq); - - /* VBI details */ - ztv->readinfo[0] = ztv->overinfo; - ztv->readinfo[0].kindof = FBUFFER_VBI; - ztv->readinfo[0].w = -864; - ztv->readinfo[0].h = -38; - ztv->readinfo[0].format = VIDEO_PALETTE_YUV422; - ztv->readinfo[0].bpp = palette2fmt[ztv->readinfo[0].format].bpp; - ztv->readinfo[0].bpl = 1024*ztv->readinfo[0].bpp; - for (i=1; i<ZORAN_VBI_BUFFERS; i++) - ztv->readinfo[i] = ztv->readinfo[0]; - init_waitqueue_head(&ztv->vbiq); - - /* maintenance data */ - ztv->have_decoder = 0; - ztv->have_tuner = 0; - ztv->tuner_type = 0; - ztv->running = 0; - ztv->users = 0; - rwlock_init(&ztv->lock); - ztv->workqueue = 0; - ztv->fieldnr = 0; - ztv->lastfieldnr = 0; - - if (triton1) - zrand(~ZORAN_VDC_TRICOM, ZORAN_VDC); - - /* external FL determines TOP frame */ - zror(ZORAN_VFEC_EXTFL, ZORAN_VFEC); - - /* set HSpol */ - if (ztv->card->hsync_pos) - zrwrite(ZORAN_VFEH_HSPOL, ZORAN_VFEH); - /* set VSpol */ - if (ztv->card->vsync_pos) - zrwrite(ZORAN_VFEV_VSPOL, ZORAN_VFEV); - - /* Set the proper General Purpuse register bits */ - /* implicit: no softreset, 0 waitstates */ - zrwrite(ZORAN_PCI_SOFTRESET|(ztv->card->gpdir<<0),ZORAN_PCI); - /* implicit: 3 duration and recovery PCI clocks on guest 0-3 */ - zrwrite(ztv->card->gpval<<24,ZORAN_GUEST); - - /* clear interrupt status */ - zrwrite(~0, ZORAN_ISR); - - /* - * i2c template - */ - ztv->i2c = zoran_i2c_bus_template; - sprintf(ztv->i2c.name,"zoran-%d",card); - ztv->i2c.data = ztv; - - /* - * Now add the template and register the device unit - */ - ztv->video_dev = zr36120_template; - strcpy(ztv->video_dev.name, ztv->i2c.name); - ztv->video_dev.priv = ztv; - if (video_register_device(&ztv->video_dev, VFL_TYPE_GRABBER, video_nr) < 0) - return -1; - - ztv->vbi_dev = vbi_template; - strcpy(ztv->vbi_dev.name, ztv->i2c.name); - ztv->vbi_dev.priv = ztv; - if (video_register_device(&ztv->vbi_dev, VFL_TYPE_VBI, vbi_nr) < 0) { - video_unregister_device(&ztv->video_dev); - return -1; - } - i2c_register_bus(&ztv->i2c); - - /* set interrupt mask - the PIN enable will be set later */ - zrwrite(ZORAN_ICR_GIRQ0|ZORAN_ICR_GIRQ1|ZORAN_ICR_CODE, ZORAN_ICR); - - printk(KERN_INFO "%s: installed %s\n",ztv->i2c.name,ztv->card->name); - return 0; -} - -static -void release_zoran(int max) -{ - struct zoran *ztv; - int i; - - for (i=0;i<max; i++) - { - ztv = &zorans[i]; - - /* turn off all capturing, DMA and IRQs */ - /* reset the zoran */ - zrand(~ZORAN_PCI_SOFTRESET,ZORAN_PCI); - udelay(10); - zror(ZORAN_PCI_SOFTRESET,ZORAN_PCI); - udelay(10); - - /* first disable interrupts before unmapping the memory! */ - zrwrite(0, ZORAN_ICR); - zrwrite(0xffffffffUL,ZORAN_ISR); - - /* free it */ - free_irq(ztv->dev->irq,ztv); - - /* unregister i2c_bus */ - i2c_unregister_bus((&ztv->i2c)); - - /* unmap and free memory */ - if (ztv->zoran_mem) - iounmap(ztv->zoran_mem); - - /* Drop PCI device */ - pci_dev_put(ztv->dev); - - video_unregister_device(&ztv->video_dev); - video_unregister_device(&ztv->vbi_dev); - } -} - -void __exit zr36120_exit(void) -{ - release_zoran(zoran_cards); -} - -int __init zr36120_init(void) -{ - int card; - - handle_chipset(); - zoran_cards = find_zoran(); - if (zoran_cards <= 0) - return -EIO; - - /* initialize Zorans */ - for (card=0; card<zoran_cards; card++) { - if (init_zoran(card) < 0) { - /* only release the zorans we have registered */ - release_zoran(card); - return -EIO; - } - } - return 0; -} - -module_init(zr36120_init); -module_exit(zr36120_exit); diff --git a/drivers/media/video/zr36120.h b/drivers/media/video/zr36120.h deleted file mode 100644 index a71e485b0f9..00000000000 --- a/drivers/media/video/zr36120.h +++ /dev/null @@ -1,279 +0,0 @@ -/* - zr36120.h - Zoran 36120/36125 based framegrabbers - - Copyright (C) 1998-1999 Pauline Middelink (middelin@polyware.nl) - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 2 of the License, or - (at your option) any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program; if not, write to the Free Software - Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. -*/ - -#ifndef _ZR36120_H -#define _ZR36120_H - -#ifdef __KERNEL__ - -#include <linux/types.h> -#include <linux/wait.h> - -#include <linux/i2c-old.h> -#include <linux/videodev.h> - -#include <asm/io.h> - -/* - * Debug macro's, place an x behind the ) for actual debug-compilation - * E.g. #define DEBUG(x...) x - */ -#define DEBUG(x...) /* Debug driver */ -#define IDEBUG(x...) /* Debug interrupt handler */ -#define PDEBUG 0 /* Debug PCI writes */ - -/* defined in zr36120_i2c */ -extern struct i2c_bus zoran_i2c_bus_template; - -#define ZORAN_MAX_FBUFFERS 2 -#define ZORAN_MAX_FBUFFER (768*576*2) -#define ZORAN_MAX_FBUFSIZE (ZORAN_MAX_FBUFFERS*ZORAN_MAX_FBUFFER) - -#define ZORAN_VBI_BUFFERS 2 -#define ZORAN_VBI_BUFSIZE (22*1024*2) - -struct tvcard { - char* name; /* name of the cardtype */ - int video_inputs; /* number of channels defined in video_mux */ - int audio_inputs; /* number of channels defined in audio_mux */ - __u32 swapi2c:1, /* need to swap i2c wires SDA/SCL? */ - usegirq1:1, /* VSYNC at GIRQ1 instead of GIRQ0? */ - vsync_pos:1, /* positive VSYNC signal? */ - hsync_pos:1, /* positive HSYNC signal? */ - gpdir:8, /* General Purpose Direction register */ - gpval:8; /* General Purpose Value register */ - int video_mux[6]; /* mapping channel number to physical input */ -#define IS_TUNER 0x80 -#define IS_SVHS 0x40 -#define CHANNEL_MASK 0x3F - int audio_mux[6]; /* mapping channel number to physical input */ -}; -#define TUNER(x) ((x)|IS_TUNER) -#define SVHS(x) ((x)|IS_SVHS) - -struct vidinfo { - struct vidinfo* next; /* next active buffer */ - uint kindof; -#define FBUFFER_OVERLAY 0 -#define FBUFFER_GRAB 1 -#define FBUFFER_VBI 2 - uint status; -#define FBUFFER_FREE 0 -#define FBUFFER_BUSY 1 -#define FBUFFER_DONE 2 - ulong fieldnr; /* # of field, not framer! */ - uint x,y; - int w,h; /* w,h can be negative! */ - uint format; /* index in palette2fmt[] */ - uint bpp; /* lookup from palette2fmt[] */ - uint bpl; /* calc: width * bpp */ - ulong busadr; /* bus addr for DMA engine */ - char* memadr; /* kernel addr for making copies */ - ulong* overlay; /* kernel addr of overlay mask */ -}; - -struct zoran -{ - struct video_device video_dev; -#define CARD_DEBUG KERN_DEBUG "%s(%lu): " -#define CARD_INFO KERN_INFO "%s(%lu): " -#define CARD_ERR KERN_ERR "%s(%lu): " -#define CARD ztv->video_dev.name,ztv->fieldnr - - /* zoran chip specific details */ - struct i2c_bus i2c; /* i2c registration data */ - struct pci_dev* dev; /* ptr to PCI device */ - ulong zoran_adr; /* bus address of IO memory */ - char* zoran_mem; /* kernel address of IO memory */ - struct tvcard* card; /* the cardtype */ - uint norm; /* 0=PAL, 1=NTSC, 2=SECAM */ - uint tuner_freq; /* Current freq in kHz */ - struct video_picture picture; /* Current picture params */ - - /* videocard details */ - uint swidth; /* screen width */ - uint sheight; /* screen height */ - uint depth; /* depth in bits */ - - /* State details */ - char* fbuffer; /* framebuffers for mmap */ - struct vidinfo overinfo; /* overlay data */ - struct vidinfo grabinfo[ZORAN_MAX_FBUFFERS]; /* grabbing data*/ - wait_queue_head_t grabq; /* grabbers queue */ - - /* VBI details */ - struct video_device vbi_dev; - struct vidinfo readinfo[2]; /* VBI data - flip buffers */ - wait_queue_head_t vbiq; /* vbi queue */ - - /* maintenance data */ - int have_decoder; /* did we detect a mux? */ - int have_tuner; /* did we detect a tuner? */ - int users; /* howmany video/vbi open? */ - int tuner_type; /* tuner type, when found */ - int running; /* are we rolling? */ - rwlock_t lock; - long state; /* what is requested of us? */ -#define STATE_OVERLAY 0 -#define STATE_VBI 1 - struct vidinfo* workqueue; /* buffers to grab, head is active */ - ulong fieldnr; /* #field, ticked every VSYNC */ - ulong lastfieldnr; /* #field, ticked every GRAB */ - - int vidInterlace; /* calculated */ - int vidXshift; /* calculated */ - uint vidWidth; /* calculated */ - uint vidHeight; /* calculated */ -}; - -#define zrwrite(dat,adr) writel((dat),(char *) (ztv->zoran_mem+(adr))) -#define zrread(adr) readl(ztv->zoran_mem+(adr)) - -#if PDEBUG == 0 -#define zrand(dat,adr) zrwrite((dat) & zrread(adr), adr) -#define zror(dat,adr) zrwrite((dat) | zrread(adr), adr) -#define zraor(dat,mask,adr) zrwrite( ((dat)&~(mask)) | ((mask)&zrread(adr)), adr) -#else -#define zrand(dat, adr) \ -do { \ - ulong data = (dat) & zrread((adr)); \ - zrwrite(data, (adr)); \ - if (0 != (~(dat) & zrread((adr)))) \ - printk(KERN_DEBUG "zoran: zrand at %d(%d) detected set bits(%x)\n", __LINE__, (adr), (dat)); \ -} while(0) - -#define zror(dat, adr) \ -do { \ - ulong data = (dat) | zrread((adr)); \ - zrwrite(data, (adr)); \ - if ((dat) != ((dat) & zrread(adr))) \ - printk(KERN_DEBUG "zoran: zror at %d(%d) detected unset bits(%x)\n", __LINE__, (adr), (dat)); \ -} while(0) - -#define zraor(dat, mask, adr) \ -do { \ - ulong data; \ - if ((dat) & (mask)) \ - printk(KERN_DEBUG "zoran: zraor at %d(%d) detected bits(%x:%x)\n", __LINE__, (adr), (dat), (mask)); \ - data = ((dat)&~(mask)) | ((mask) & zrread((adr))); \ - zrwrite(data,(adr)); \ - if ( (dat) != (~(mask) & zrread((adr))) ) \ - printk(KERN_DEBUG "zoran: zraor at %d(%d) could not set all bits(%x:%x)\n", __LINE__, (adr), (dat), (mask)); \ -} while(0) -#endif - -#endif - -/* zoran PCI address space */ -#define ZORAN_VFEH 0x000 /* Video Front End Horizontal Conf. */ -#define ZORAN_VFEH_HSPOL (1<<30) -#define ZORAN_VFEH_HSTART (0x3FF<<10) -#define ZORAN_VFEH_HEND (0x3FF<<0) - -#define ZORAN_VFEV 0x004 /* Video Front End Vertical Conf. */ -#define ZORAN_VFEV_VSPOL (1<<30) -#define ZORAN_VFEV_VSTART (0x3FF<<10) -#define ZORAN_VFEV_VEND (0x3FF<<0) - -#define ZORAN_VFEC 0x008 /* Video Front End Scaler and Pixel */ -#define ZORAN_VFEC_EXTFL (1<<26) -#define ZORAN_VFEC_TOPFIELD (1<<25) -#define ZORAN_VFEC_VCLKPOL (1<<24) -#define ZORAN_VFEC_HFILTER (7<<21) -#define ZORAN_VFEC_HFILTER_1 (0<<21) /* no lumi, 3-tap chromo */ -#define ZORAN_VFEC_HFILTER_2 (1<<21) /* 3-tap lumi, 3-tap chromo */ -#define ZORAN_VFEC_HFILTER_3 (2<<21) /* 4-tap lumi, 4-tap chromo */ -#define ZORAN_VFEC_HFILTER_4 (3<<21) /* 5-tap lumi, 4-tap chromo */ -#define ZORAN_VFEC_HFILTER_5 (4<<21) /* 4-tap lumi, 4-tap chromo */ -#define ZORAN_VFEC_DUPFLD (1<<20) -#define ZORAN_VFEC_HORDCM (63<<14) -#define ZORAN_VFEC_VERDCM (63<<8) -#define ZORAN_VFEC_DISPMOD (1<<6) -#define ZORAN_VFEC_RGB (3<<3) -#define ZORAN_VFEC_RGB_YUV422 (0<<3) -#define ZORAN_VFEC_RGB_RGB888 (1<<3) -#define ZORAN_VFEC_RGB_RGB565 (2<<3) -#define ZORAN_VFEC_RGB_RGB555 (3<<3) -#define ZORAN_VFEC_ERRDIF (1<<2) -#define ZORAN_VFEC_PACK24 (1<<1) -#define ZORAN_VFEC_LE (1<<0) - -#define ZORAN_VTOP 0x00C /* Video Display "Top" */ - -#define ZORAN_VBOT 0x010 /* Video Display "Bottom" */ - -#define ZORAN_VSTR 0x014 /* Video Display Stride */ -#define ZORAN_VSTR_DISPSTRIDE (0xFFFF<<16) -#define ZORAN_VSTR_VIDOVF (1<<8) -#define ZORAN_VSTR_SNAPSHOT (1<<1) -#define ZORAN_VSTR_GRAB (1<<0) - -#define ZORAN_VDC 0x018 /* Video Display Conf. */ -#define ZORAN_VDC_VIDEN (1<<31) -#define ZORAN_VDC_MINPIX (0x1F<<25) -#define ZORAN_VDC_TRICOM (1<<24) -#define ZORAN_VDC_VIDWINHT (0x3FF<<12) -#define ZORAN_VDC_VIDWINWID (0x3FF<<0) - -#define ZORAN_MTOP 0x01C /* Masking Map "Top" */ - -#define ZORAN_MBOT 0x020 /* Masking Map "Bottom" */ - -#define ZORAN_OCR 0x024 /* Overlay Control */ -#define ZORAN_OCR_OVLEN (1<<15) -#define ZORAN_OCR_MASKSTRIDE (0xFF<<0) - -#define ZORAN_PCI 0x028 /* System, PCI and GPP Control */ -#define ZORAN_PCI_SOFTRESET (1<<24) -#define ZORAN_PCI_WAITSTATE (3<<16) -#define ZORAN_PCI_GENPURDIR (0xFF<<0) - -#define ZORAN_GUEST 0x02C /* GuestBus Control */ - -#define ZORAN_CSOURCE 0x030 /* Code Source Address */ - -#define ZORAN_CTRANS 0x034 /* Code Transfer Control */ - -#define ZORAN_CMEM 0x038 /* Code Memory Pointer */ - -#define ZORAN_ISR 0x03C /* Interrupt Status Register */ -#define ZORAN_ISR_CODE (1<<28) -#define ZORAN_ISR_GIRQ0 (1<<29) -#define ZORAN_ISR_GIRQ1 (1<<30) - -#define ZORAN_ICR 0x040 /* Interrupt Control Register */ -#define ZORAN_ICR_EN (1<<24) -#define ZORAN_ICR_CODE (1<<28) -#define ZORAN_ICR_GIRQ0 (1<<29) -#define ZORAN_ICR_GIRQ1 (1<<30) - -#define ZORAN_I2C 0x044 /* I2C-Bus */ -#define ZORAN_I2C_SCL (1<<1) -#define ZORAN_I2C_SDA (1<<0) - -#define ZORAN_POST 0x48 /* PostOffice */ -#define ZORAN_POST_PEN (1<<25) -#define ZORAN_POST_TIME (1<<24) -#define ZORAN_POST_DIR (1<<23) -#define ZORAN_POST_GUESTID (3<<20) -#define ZORAN_POST_GUEST (7<<16) -#define ZORAN_POST_DATA (0xFF<<0) - -#endif diff --git a/drivers/media/video/zr36120_i2c.c b/drivers/media/video/zr36120_i2c.c deleted file mode 100644 index 21fde43a6ae..00000000000 --- a/drivers/media/video/zr36120_i2c.c +++ /dev/null @@ -1,132 +0,0 @@ -/* - zr36120_i2c.c - Zoran 36120/36125 based framegrabbers - - Copyright (C) 1998-1999 Pauline Middelink <middelin@polyware.nl> - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 2 of the License, or - (at your option) any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program; if not, write to the Free Software - Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. -*/ - -#include <linux/types.h> -#include <linux/delay.h> -#include <asm/io.h> - -#include <linux/video_decoder.h> -#include <asm/uaccess.h> - -#include "tuner.h" -#include "zr36120.h" - -/* ----------------------------------------------------------------------- */ -/* I2C functions */ -/* ----------------------------------------------------------------------- */ - -/* software I2C functions */ - -#define I2C_DELAY 10 - -static void i2c_setlines(struct i2c_bus *bus,int ctrl,int data) -{ - struct zoran *ztv = (struct zoran*)bus->data; - unsigned int b = 0; - if (data) b |= ztv->card->swapi2c ? ZORAN_I2C_SCL : ZORAN_I2C_SDA; - if (ctrl) b |= ztv->card->swapi2c ? ZORAN_I2C_SDA : ZORAN_I2C_SCL; - zrwrite(b, ZORAN_I2C); - udelay(I2C_DELAY); -} - -static int i2c_getdataline(struct i2c_bus *bus) -{ - struct zoran *ztv = (struct zoran*)bus->data; - if (ztv->card->swapi2c) - return zrread(ZORAN_I2C) & ZORAN_I2C_SCL; - return zrread(ZORAN_I2C) & ZORAN_I2C_SDA; -} - -static -void attach_inform(struct i2c_bus *bus, int id) -{ - struct zoran *ztv = (struct zoran*)bus->data; - struct video_decoder_capability dc; - int rv; - - switch (id) { - case I2C_DRIVERID_VIDEODECODER: - DEBUG(printk(CARD_INFO "decoder attached\n",CARD)); - - /* fetch the capabilities of the decoder */ - rv = i2c_control_device(&ztv->i2c, I2C_DRIVERID_VIDEODECODER, DECODER_GET_CAPABILITIES, &dc); - if (rv) { - DEBUG(printk(CARD_DEBUG "decoder is not V4L aware!\n",CARD)); - break; - } - DEBUG(printk(CARD_DEBUG "capabilities %d %d %d\n",CARD,dc.flags,dc.inputs,dc.outputs)); - - /* Test if the decoder can de VBI transfers */ - if (dc.flags & 16 /*VIDEO_DECODER_VBI*/) - ztv->have_decoder = 2; - else - ztv->have_decoder = 1; - break; - case I2C_DRIVERID_TUNER: - ztv->have_tuner = 1; - DEBUG(printk(CARD_INFO "tuner attached\n",CARD)); - if (ztv->tuner_type >= 0) - { - if (i2c_control_device(&ztv->i2c,I2C_DRIVERID_TUNER,TUNER_SET_TYPE,&ztv->tuner_type)<0) - DEBUG(printk(CARD_INFO "attach_inform; tuner won't be set to type %d\n",CARD,ztv->tuner_type)); - } - break; - default: - DEBUG(printk(CARD_INFO "attach_inform; unknown device id=%d\n",CARD,id)); - break; - } -} - -static -void detach_inform(struct i2c_bus *bus, int id) -{ - struct zoran *ztv = (struct zoran*)bus->data; - - switch (id) { - case I2C_DRIVERID_VIDEODECODER: - ztv->have_decoder = 0; - DEBUG(printk(CARD_INFO "decoder detached\n",CARD)); - break; - case I2C_DRIVERID_TUNER: - ztv->have_tuner = 0; - DEBUG(printk(CARD_INFO "tuner detached\n",CARD)); - break; - default: - DEBUG(printk(CARD_INFO "detach_inform; unknown device id=%d\n",CARD,id)); - break; - } -} - -struct i2c_bus zoran_i2c_bus_template = -{ - "ZR36120", - I2C_BUSID_ZORAN, - NULL, - - SPIN_LOCK_UNLOCKED, - - attach_inform, - detach_inform, - - i2c_setlines, - i2c_getdataline, - NULL, - NULL -}; diff --git a/drivers/media/video/zr36120_mem.c b/drivers/media/video/zr36120_mem.c deleted file mode 100644 index 416eaa93b8a..00000000000 --- a/drivers/media/video/zr36120_mem.c +++ /dev/null @@ -1,78 +0,0 @@ -/* - zr36120_mem.c - Zoran 36120/36125 based framegrabbers - - Copyright (C) 1998-1999 Pauline Middelink <middelin@polyware.nl> - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 2 of the License, or - (at your option) any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program; if not, write to the Free Software - Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. -*/ - -#include <linux/mm.h> -#include <linux/pci.h> -#include <linux/slab.h> -#include <linux/module.h> -#include <asm/io.h> -#ifdef CONFIG_BIGPHYS_AREA -#include <linux/bigphysarea.h> -#endif - -#include "zr36120.h" -#include "zr36120_mem.h" - -/*******************************/ -/* Memory management functions */ -/*******************************/ - -void* bmalloc(unsigned long size) -{ - void* mem; -#ifdef CONFIG_BIGPHYS_AREA - mem = bigphysarea_alloc_pages(size/PAGE_SIZE, 1, GFP_KERNEL); -#else - /* - * The following function got a lot of memory at boottime, - * so we know its always there... - */ - mem = (void*)__get_free_pages(GFP_USER|GFP_DMA,get_order(size)); -#endif - if (mem) { - unsigned long adr = (unsigned long)mem; - while (size > 0) { - SetPageReserved(virt_to_page(phys_to_virt(adr))); - adr += PAGE_SIZE; - size -= PAGE_SIZE; - } - } - return mem; -} - -void bfree(void* mem, unsigned long size) -{ - if (mem) { - unsigned long adr = (unsigned long)mem; - unsigned long siz = size; - while (siz > 0) { - ClearPageReserved(virt_to_page(phys_to_virt(adr))); - adr += PAGE_SIZE; - siz -= PAGE_SIZE; - } -#ifdef CONFIG_BIGPHYS_AREA - bigphysarea_free_pages(mem); -#else - free_pages((unsigned long)mem,get_order(size)); -#endif - } -} - -MODULE_LICENSE("GPL"); diff --git a/drivers/media/video/zr36120_mem.h b/drivers/media/video/zr36120_mem.h deleted file mode 100644 index aad117acc91..00000000000 --- a/drivers/media/video/zr36120_mem.h +++ /dev/null @@ -1,3 +0,0 @@ -/* either kmalloc() or bigphysarea() alloced memory - continuous */ -void* bmalloc(unsigned long size); -void bfree(void* mem, unsigned long size); |