diff options
Diffstat (limited to 'drivers/media/video')
146 files changed, 8683 insertions, 21803 deletions
diff --git a/drivers/media/video/Kconfig b/drivers/media/video/Kconfig index bdbc9d30541..2e15903b976 100644 --- a/drivers/media/video/Kconfig +++ b/drivers/media/video/Kconfig @@ -517,19 +517,6 @@ config VIDEO_UPD64083 endmenu # encoder / decoder chips -config DISPLAY_DAVINCI_DM646X_EVM - tristate "DM646x EVM Video Display" - depends on VIDEO_DEV && MACH_DAVINCI_DM6467_EVM - select VIDEOBUF_DMA_CONTIG - select VIDEO_DAVINCI_VPIF - select VIDEO_ADV7343 - select VIDEO_THS7303 - help - Support for DM6467 based display device. - - To compile this driver as a module, choose M here: the - module will be called vpif_display. - config VIDEO_SH_VOU tristate "SuperH VOU video output driver" depends on VIDEO_DEV && ARCH_SHMOBILE @@ -537,29 +524,22 @@ config VIDEO_SH_VOU help Support for the Video Output Unit (VOU) on SuperH SoCs. -config CAPTURE_DAVINCI_DM646X_EVM - tristate "DM646x EVM Video Capture" - depends on VIDEO_DEV && MACH_DAVINCI_DM6467_EVM +config VIDEO_VIU + tristate "Freescale VIU Video Driver" + depends on VIDEO_V4L2 && PPC_MPC512x select VIDEOBUF_DMA_CONTIG - select VIDEO_DAVINCI_VPIF - help - Support for DM6467 based capture device. - - To compile this driver as a module, choose M here: the - module will be called vpif_capture. - -config VIDEO_DAVINCI_VPIF - tristate "DaVinci VPIF Driver" - depends on DISPLAY_DAVINCI_DM646X_EVM - help - Support for DaVinci VPIF Driver. + default y + ---help--- + Support for Freescale VIU video driver. This device captures + video data, or overlays video on DIU frame buffer. - To compile this driver as a module, choose M here: the - module will be called vpif. + Say Y here if you want to enable VIU device on MPC5121e Rev2+. + In doubt, say N. config VIDEO_VIVI tristate "Virtual Video Driver" - depends on VIDEO_DEV && VIDEO_V4L2 && !SPARC32 && !SPARC64 && FONTS + depends on VIDEO_DEV && VIDEO_V4L2 && !SPARC32 && !SPARC64 + depends on (FRAMEBUFFER_CONSOLE || STI_CONSOLE) && FONTS select FONT_8x16 select VIDEOBUF_VMALLOC default n @@ -570,66 +550,7 @@ config VIDEO_VIVI Say Y here if you want to test video apps or debug V4L devices. In doubt, say N. -config VIDEO_VPSS_SYSTEM - tristate "VPSS System module driver" - depends on ARCH_DAVINCI - help - Support for vpss system module for video driver - -config VIDEO_VPFE_CAPTURE - tristate "VPFE Video Capture Driver" - depends on VIDEO_V4L2 && ARCH_DAVINCI - select VIDEOBUF_DMA_CONTIG - help - Support for DMXXXX VPFE based frame grabber. This is the - common V4L2 module for following DMXXX SoCs from Texas - Instruments:- DM6446 & DM355. - - To compile this driver as a module, choose M here: the - module will be called vpfe-capture. - -config VIDEO_DM6446_CCDC - tristate "DM6446 CCDC HW module" - depends on ARCH_DAVINCI_DM644x && VIDEO_VPFE_CAPTURE - select VIDEO_VPSS_SYSTEM - default y - help - Enables DaVinci CCD hw module. DaVinci CCDC hw interfaces - with decoder modules such as TVP5146 over BT656 or - sensor module such as MT9T001 over a raw interface. This - module configures the interface and CCDC/ISIF to do - video frame capture from slave decoders. - - To compile this driver as a module, choose M here: the - module will be called vpfe. - -config VIDEO_DM355_CCDC - tristate "DM355 CCDC HW module" - depends on ARCH_DAVINCI_DM355 && VIDEO_VPFE_CAPTURE - select VIDEO_VPSS_SYSTEM - default y - help - Enables DM355 CCD hw module. DM355 CCDC hw interfaces - with decoder modules such as TVP5146 over BT656 or - sensor module such as MT9T001 over a raw interface. This - module configures the interface and CCDC/ISIF to do - video frame capture from a slave decoders - - To compile this driver as a module, choose M here: the - module will be called vpfe. - -config VIDEO_ISIF - tristate "ISIF HW module" - depends on ARCH_DAVINCI_DM365 && VIDEO_VPFE_CAPTURE - select VIDEO_VPSS_SYSTEM - default y - help - Enables ISIF hw module. This is the hardware module for - configuring ISIF in VPFE to capture Raw Bayer RGB data from - a image sensor or YUV data from a YUV source. - - To compile this driver as a module, choose M here: the - module will be called vpfe. +source "drivers/media/video/davinci/Kconfig" source "drivers/media/video/omap/Kconfig" @@ -955,6 +876,12 @@ config VIDEO_PXA27x ---help--- This is a v4l2 driver for the PXA27x Quick Capture Interface +config VIDEO_SH_MOBILE_CSI2 + tristate "SuperH Mobile MIPI CSI-2 Interface driver" + depends on VIDEO_DEV && SOC_CAMERA && HAVE_CLK + ---help--- + This is a v4l2 driver for the SuperH MIPI CSI-2 Interface + config VIDEO_SH_MOBILE_CEU tristate "SuperH Mobile CEU Interface driver" depends on VIDEO_DEV && SOC_CAMERA && HAS_DMA && HAVE_CLK @@ -969,6 +896,19 @@ config VIDEO_OMAP2 ---help--- This is a v4l2 driver for the TI OMAP2 camera capture interface +config VIDEO_MX2_HOSTSUPPORT + bool + +config VIDEO_MX2 + tristate "i.MX27/i.MX25 Camera Sensor Interface driver" + depends on VIDEO_DEV && SOC_CAMERA && (MACH_MX27 || ARCH_MX25) + select VIDEOBUF_DMA_CONTIG + select VIDEO_MX2_HOSTSUPPORT + ---help--- + This is a v4l2 driver for the i.MX27 and the i.MX25 Camera Sensor + Interface + + # # USB Multimedia device configuration # @@ -1000,61 +940,6 @@ source "drivers/media/video/usbvideo/Kconfig" source "drivers/media/video/et61x251/Kconfig" -config VIDEO_OVCAMCHIP - tristate "OmniVision Camera Chip support (DEPRECATED)" - depends on I2C && VIDEO_V4L1 - default n - ---help--- - This driver is DEPRECATED please use the gspca ov519 module - instead. Note that for the ov511 / ov518 support of the gspca module - you need atleast version 0.6.0 of libv4l and for the w9968cf - atleast version 0.6.3 of libv4l. - - Support for the OmniVision OV6xxx and OV7xxx series of camera chips. - This driver is intended to be used with the ov511 and w9968cf USB - camera drivers. - - To compile this driver as a module, choose M here: the - module will be called ovcamchip. - -config USB_W9968CF - tristate "USB W996[87]CF JPEG Dual Mode Camera support (DEPRECATED)" - depends on VIDEO_V4L1 && I2C && VIDEO_OVCAMCHIP - default n - ---help--- - This driver is DEPRECATED please use the gspca ov519 module - instead. Note that for the w9968cf support of the gspca module - you need atleast version 0.6.3 of libv4l. - - Say Y here if you want support for cameras based on OV681 or - Winbond W9967CF/W9968CF JPEG USB Dual Mode Camera Chips. - - This driver has an optional plugin, which is distributed as a - separate module only (released under GPL). It allows to use higher - resolutions and framerates, but cannot be included in the official - Linux kernel for performance purposes. - - See <file:Documentation/video4linux/w9968cf.txt> for more info. - - To compile this driver as a module, choose M here: the - module will be called w9968cf. - -config USB_OV511 - tristate "USB OV511 Camera support (DEPRECATED)" - depends on VIDEO_V4L1 - default n - ---help--- - This driver is DEPRECATED please use the gspca ov519 module - instead. Note that for the ov511 / ov518 support of the gspca module - you need atleast version 0.6.0 of libv4l. - - Say Y here if you want to connect this type of camera to your - computer's USB port. See <file:Documentation/video4linux/ov511.txt> - for more information and for a list of supported cameras. - - To compile this driver as a module, choose M here: the - module will be called ov511. - config USB_SE401 tristate "USB SE401 Camera support" depends on VIDEO_V4L1 @@ -1068,25 +953,6 @@ config USB_SE401 source "drivers/media/video/sn9c102/Kconfig" -config USB_STV680 - tristate "USB STV680 (Pencam) Camera support (DEPRECATED)" - depends on VIDEO_V4L1 - default n - ---help--- - This driver is DEPRECATED please use the gspca stv0680 module - instead. Note that for the gspca stv0680 module you need - atleast version 0.6.3 of libv4l. - - Say Y here if you want to connect this type of camera to your - computer's USB port. This includes the Pencam line of cameras. - See <file:Documentation/video4linux/stv680.txt> for more information - and for a list of supported cameras. - - To compile this driver as a module, choose M here: the - module will be called stv680. - -source "drivers/media/video/zc0301/Kconfig" - source "drivers/media/video/pwc/Kconfig" config USB_ZR364XX diff --git a/drivers/media/video/Makefile b/drivers/media/video/Makefile index cc93859d316..1051ecc602e 100644 --- a/drivers/media/video/Makefile +++ b/drivers/media/video/Makefile @@ -105,7 +105,6 @@ obj-$(CONFIG_VIDEO_TLG2300) += tlg2300/ obj-$(CONFIG_VIDEO_CX231XX) += cx231xx/ obj-$(CONFIG_VIDEO_USBVISION) += usbvision/ obj-$(CONFIG_VIDEO_PVRUSB2) += pvrusb2/ -obj-$(CONFIG_VIDEO_OVCAMCHIP) += ovcamchip/ obj-$(CONFIG_VIDEO_CPIA2) += cpia2/ obj-$(CONFIG_VIDEO_MXB) += mxb.o obj-$(CONFIG_VIDEO_HEXIUM_ORION) += hexium_orion.o @@ -127,17 +126,13 @@ obj-$(CONFIG_VIDEO_CX2341X) += cx2341x.o obj-$(CONFIG_VIDEO_CAFE_CCIC) += cafe_ccic.o obj-$(CONFIG_USB_DABUSB) += dabusb.o -obj-$(CONFIG_USB_OV511) += ov511.o obj-$(CONFIG_USB_SE401) += se401.o -obj-$(CONFIG_USB_STV680) += stv680.o -obj-$(CONFIG_USB_W9968CF) += w9968cf.o obj-$(CONFIG_USB_ZR364XX) += zr364xx.o obj-$(CONFIG_USB_STKWEBCAM) += stkwebcam.o obj-$(CONFIG_USB_SN9C102) += sn9c102/ obj-$(CONFIG_USB_ET61X251) += et61x251/ obj-$(CONFIG_USB_PWC) += pwc/ -obj-$(CONFIG_USB_ZC0301) += zc0301/ obj-$(CONFIG_USB_GSPCA) += gspca/ obj-$(CONFIG_VIDEO_HDPVR) += hdpvr/ @@ -151,6 +146,7 @@ obj-$(CONFIG_USB_S2255) += s2255drv.o obj-$(CONFIG_VIDEO_IVTV) += ivtv/ obj-$(CONFIG_VIDEO_CX18) += cx18/ +obj-$(CONFIG_VIDEO_VIU) += fsl-viu.o obj-$(CONFIG_VIDEO_VIVI) += vivi.o obj-$(CONFIG_VIDEO_MEM2MEM_TESTDEV) += mem2mem_testdev.o obj-$(CONFIG_VIDEO_CX23885) += cx23885/ @@ -162,8 +158,10 @@ obj-$(CONFIG_SOC_CAMERA) += soc_camera.o soc_mediabus.o obj-$(CONFIG_SOC_CAMERA_PLATFORM) += soc_camera_platform.o # soc-camera host drivers have to be linked after camera drivers obj-$(CONFIG_VIDEO_MX1) += mx1_camera.o +obj-$(CONFIG_VIDEO_MX2) += mx2_camera.o obj-$(CONFIG_VIDEO_MX3) += mx3_camera.o obj-$(CONFIG_VIDEO_PXA27x) += pxa_camera.o +obj-$(CONFIG_VIDEO_SH_MOBILE_CSI2) += sh_mobile_csi2.o obj-$(CONFIG_VIDEO_SH_MOBILE_CEU) += sh_mobile_ceu_camera.o obj-$(CONFIG_ARCH_DAVINCI) += davinci/ @@ -177,7 +175,7 @@ obj-$(CONFIG_VIDEO_SAA7164) += saa7164/ obj-$(CONFIG_VIDEO_IR_I2C) += ir-kbd-i2c.o -obj-$(CONFIG_ARCH_DAVINCI) += davinci/ +obj-y += davinci/ obj-$(CONFIG_ARCH_OMAP) += omap/ diff --git a/drivers/media/video/ak881x.c b/drivers/media/video/ak881x.c index 1573392f74b..b388654d48c 100644 --- a/drivers/media/video/ak881x.c +++ b/drivers/media/video/ak881x.c @@ -126,7 +126,7 @@ static int ak881x_try_g_mbus_fmt(struct v4l2_subdev *sd, v4l_bound_align_image(&mf->width, 0, 720, 2, &mf->height, 0, ak881x->lines, 1, 0); mf->field = V4L2_FIELD_INTERLACED; - mf->code = V4L2_MBUS_FMT_YUYV8_2X8_LE; + mf->code = V4L2_MBUS_FMT_YUYV8_2X8; mf->colorspace = V4L2_COLORSPACE_SMPTE170M; return 0; @@ -136,7 +136,7 @@ static int ak881x_s_mbus_fmt(struct v4l2_subdev *sd, struct v4l2_mbus_framefmt *mf) { if (mf->field != V4L2_FIELD_INTERLACED || - mf->code != V4L2_MBUS_FMT_YUYV8_2X8_LE) + mf->code != V4L2_MBUS_FMT_YUYV8_2X8) return -EINVAL; return ak881x_try_g_mbus_fmt(sd, mf); @@ -148,7 +148,7 @@ static int ak881x_enum_mbus_fmt(struct v4l2_subdev *sd, unsigned int index, if (index) return -EINVAL; - *code = V4L2_MBUS_FMT_YUYV8_2X8_LE; + *code = V4L2_MBUS_FMT_YUYV8_2X8; return 0; } diff --git a/drivers/media/video/au0828/Makefile b/drivers/media/video/au0828/Makefile index 4d262315818..5c7f2f7d980 100644 --- a/drivers/media/video/au0828/Makefile +++ b/drivers/media/video/au0828/Makefile @@ -1,4 +1,4 @@ -au0828-objs := au0828-core.o au0828-i2c.o au0828-cards.o au0828-dvb.o au0828-video.o +au0828-objs := au0828-core.o au0828-i2c.o au0828-cards.o au0828-dvb.o au0828-video.o au0828-vbi.o obj-$(CONFIG_VIDEO_AU0828) += au0828.o diff --git a/drivers/media/video/au0828/au0828-vbi.c b/drivers/media/video/au0828/au0828-vbi.c new file mode 100644 index 00000000000..63f593070ee --- /dev/null +++ b/drivers/media/video/au0828/au0828-vbi.c @@ -0,0 +1,138 @@ +/* + au0828-vbi.c - VBI driver for au0828 + + Copyright (C) 2010 Devin Heitmueller <dheitmueller@kernellabs.com> + + This work was sponsored by GetWellNetwork Inc. + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA + 02110-1301, USA. + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/init.h> +#include <linux/slab.h> + +#include "au0828.h" + +static unsigned int vbibufs = 5; +module_param(vbibufs, int, 0644); +MODULE_PARM_DESC(vbibufs, "number of vbi buffers, range 2-32"); + +/* ------------------------------------------------------------------ */ + +static void +free_buffer(struct videobuf_queue *vq, struct au0828_buffer *buf) +{ + struct au0828_fh *fh = vq->priv_data; + struct au0828_dev *dev = fh->dev; + unsigned long flags = 0; + if (in_interrupt()) + BUG(); + + /* We used to wait for the buffer to finish here, but this didn't work + because, as we were keeping the state as VIDEOBUF_QUEUED, + videobuf_queue_cancel marked it as finished for us. + (Also, it could wedge forever if the hardware was misconfigured.) + + This should be safe; by the time we get here, the buffer isn't + queued anymore. If we ever start marking the buffers as + VIDEOBUF_ACTIVE, it won't be, though. + */ + spin_lock_irqsave(&dev->slock, flags); + if (dev->isoc_ctl.vbi_buf == buf) + dev->isoc_ctl.vbi_buf = NULL; + spin_unlock_irqrestore(&dev->slock, flags); + + videobuf_vmalloc_free(&buf->vb); + buf->vb.state = VIDEOBUF_NEEDS_INIT; +} + +static int +vbi_setup(struct videobuf_queue *q, unsigned int *count, unsigned int *size) +{ + struct au0828_fh *fh = q->priv_data; + struct au0828_dev *dev = fh->dev; + + *size = dev->vbi_width * dev->vbi_height * 2; + + if (0 == *count) + *count = vbibufs; + if (*count < 2) + *count = 2; + if (*count > 32) + *count = 32; + return 0; +} + +static int +vbi_prepare(struct videobuf_queue *q, struct videobuf_buffer *vb, + enum v4l2_field field) +{ + struct au0828_fh *fh = q->priv_data; + struct au0828_dev *dev = fh->dev; + struct au0828_buffer *buf = container_of(vb, struct au0828_buffer, vb); + int rc = 0; + + buf->vb.size = dev->vbi_width * dev->vbi_height * 2; + + if (0 != buf->vb.baddr && buf->vb.bsize < buf->vb.size) + return -EINVAL; + + buf->vb.width = dev->vbi_width; + buf->vb.height = dev->vbi_height; + buf->vb.field = field; + + if (VIDEOBUF_NEEDS_INIT == buf->vb.state) { + rc = videobuf_iolock(q, &buf->vb, NULL); + if (rc < 0) + goto fail; + } + + buf->vb.state = VIDEOBUF_PREPARED; + return 0; + +fail: + free_buffer(q, buf); + return rc; +} + +static void +vbi_queue(struct videobuf_queue *vq, struct videobuf_buffer *vb) +{ + struct au0828_buffer *buf = container_of(vb, + struct au0828_buffer, + vb); + struct au0828_fh *fh = vq->priv_data; + struct au0828_dev *dev = fh->dev; + struct au0828_dmaqueue *vbiq = &dev->vbiq; + + buf->vb.state = VIDEOBUF_QUEUED; + list_add_tail(&buf->vb.queue, &vbiq->active); +} + +static void vbi_release(struct videobuf_queue *q, struct videobuf_buffer *vb) +{ + struct au0828_buffer *buf = container_of(vb, struct au0828_buffer, vb); + free_buffer(q, buf); +} + +struct videobuf_queue_ops au0828_vbi_qops = { + .buf_setup = vbi_setup, + .buf_prepare = vbi_prepare, + .buf_queue = vbi_queue, + .buf_release = vbi_release, +}; diff --git a/drivers/media/video/au0828/au0828-video.c b/drivers/media/video/au0828/au0828-video.c index 52f25aabb6d..7989a7ba7c4 100644 --- a/drivers/media/video/au0828/au0828-video.c +++ b/drivers/media/video/au0828/au0828-video.c @@ -314,6 +314,23 @@ static inline void buffer_filled(struct au0828_dev *dev, wake_up(&buf->vb.done); } +static inline void vbi_buffer_filled(struct au0828_dev *dev, + struct au0828_dmaqueue *dma_q, + struct au0828_buffer *buf) +{ + /* Advice that buffer was filled */ + au0828_isocdbg("[%p/%d] wakeup\n", buf, buf->vb.i); + + buf->vb.state = VIDEOBUF_DONE; + buf->vb.field_count++; + do_gettimeofday(&buf->vb.ts); + + dev->isoc_ctl.vbi_buf = NULL; + + list_del(&buf->vb.queue); + wake_up(&buf->vb.done); +} + /* * Identify the buffer header type and properly handles */ @@ -327,6 +344,9 @@ static void au0828_copy_video(struct au0828_dev *dev, int linesdone, currlinedone, offset, lencopy, remain; int bytesperline = dev->width << 1; /* Assumes 16-bit depth @@@@ */ + if (len == 0) + return; + if (dma_q->pos + len > buf->vb.size) len = buf->vb.size - dma_q->pos; @@ -414,17 +434,98 @@ static inline void get_next_buf(struct au0828_dmaqueue *dma_q, return; } +static void au0828_copy_vbi(struct au0828_dev *dev, + struct au0828_dmaqueue *dma_q, + struct au0828_buffer *buf, + unsigned char *p, + unsigned char *outp, unsigned long len) +{ + unsigned char *startwrite, *startread; + int bytesperline; + int i, j = 0; + + if (dev == NULL) { + au0828_isocdbg("dev is null\n"); + return; + } + + if (dma_q == NULL) { + au0828_isocdbg("dma_q is null\n"); + return; + } + if (buf == NULL) + return; + if (p == NULL) { + au0828_isocdbg("p is null\n"); + return; + } + if (outp == NULL) { + au0828_isocdbg("outp is null\n"); + return; + } + + bytesperline = dev->vbi_width; + + if (dma_q->pos + len > buf->vb.size) + len = buf->vb.size - dma_q->pos; + + startread = p; + startwrite = outp + (dma_q->pos / 2); + + /* Make sure the bottom field populates the second half of the frame */ + if (buf->top_field == 0) + startwrite += bytesperline * dev->vbi_height; + + for (i = 0; i < len; i += 2) + startwrite[j++] = startread[i+1]; + + dma_q->pos += len; +} + + +/* + * video-buf generic routine to get the next available VBI buffer + */ +static inline void vbi_get_next_buf(struct au0828_dmaqueue *dma_q, + struct au0828_buffer **buf) +{ + struct au0828_dev *dev = container_of(dma_q, struct au0828_dev, vbiq); + char *outp; + + if (list_empty(&dma_q->active)) { + au0828_isocdbg("No active queue to serve\n"); + dev->isoc_ctl.vbi_buf = NULL; + *buf = NULL; + return; + } + + /* Get the next buffer */ + *buf = list_entry(dma_q->active.next, struct au0828_buffer, vb.queue); + /* Cleans up buffer - Usefull for testing for frame/URB loss */ + outp = videobuf_to_vmalloc(&(*buf)->vb); + memset(outp, 0x00, (*buf)->vb.size); + + dev->isoc_ctl.vbi_buf = *buf; + + return; +} + /* * Controls the isoc copy of each urb packet */ static inline int au0828_isoc_copy(struct au0828_dev *dev, struct urb *urb) { struct au0828_buffer *buf; + struct au0828_buffer *vbi_buf; struct au0828_dmaqueue *dma_q = urb->context; + struct au0828_dmaqueue *vbi_dma_q = &dev->vbiq; unsigned char *outp = NULL; + unsigned char *vbioutp = NULL; int i, len = 0, rc = 1; unsigned char *p; unsigned char fbyte; + unsigned int vbi_field_size; + unsigned int remain, lencopy; if (!dev) return 0; @@ -443,6 +544,10 @@ static inline int au0828_isoc_copy(struct au0828_dev *dev, struct urb *urb) if (buf != NULL) outp = videobuf_to_vmalloc(&buf->vb); + vbi_buf = dev->isoc_ctl.vbi_buf; + if (vbi_buf != NULL) + vbioutp = videobuf_to_vmalloc(&vbi_buf->vb); + for (i = 0; i < urb->number_of_packets; i++) { int status = urb->iso_frame_desc[i].status; @@ -472,6 +577,19 @@ static inline int au0828_isoc_copy(struct au0828_dev *dev, struct urb *urb) au0828_isocdbg("Video frame %s\n", (fbyte & 0x40) ? "odd" : "even"); if (!(fbyte & 0x40)) { + /* VBI */ + if (vbi_buf != NULL) + vbi_buffer_filled(dev, + vbi_dma_q, + vbi_buf); + vbi_get_next_buf(vbi_dma_q, &vbi_buf); + if (vbi_buf == NULL) + vbioutp = NULL; + else + vbioutp = videobuf_to_vmalloc( + &vbi_buf->vb); + + /* Video */ if (buf != NULL) buffer_filled(dev, dma_q, buf); get_next_buf(dma_q, &buf); @@ -488,9 +606,36 @@ static inline int au0828_isoc_copy(struct au0828_dev *dev, struct urb *urb) buf->top_field = 0; } + if (vbi_buf != NULL) { + if (fbyte & 0x40) + vbi_buf->top_field = 1; + else + vbi_buf->top_field = 0; + } + + dev->vbi_read = 0; + vbi_dma_q->pos = 0; dma_q->pos = 0; } - if (buf != NULL) + + vbi_field_size = dev->vbi_width * dev->vbi_height * 2; + if (dev->vbi_read < vbi_field_size) { + remain = vbi_field_size - dev->vbi_read; + if (len < remain) + lencopy = len; + else + lencopy = remain; + + if (vbi_buf != NULL) + au0828_copy_vbi(dev, vbi_dma_q, vbi_buf, p, + vbioutp, len); + + len -= lencopy; + p += lencopy; + dev->vbi_read += lencopy; + } + + if (dev->vbi_read >= vbi_field_size && buf != NULL) au0828_copy_video(dev, dma_q, buf, p, outp, len); } return rc; @@ -642,7 +787,7 @@ int au0828_analog_stream_enable(struct au0828_dev *d) au0828_writereg(d, 0x114, 0xa0); au0828_writereg(d, 0x115, 0x05); /* set y position */ - au0828_writereg(d, 0x112, 0x02); + au0828_writereg(d, 0x112, 0x00); au0828_writereg(d, 0x113, 0x00); au0828_writereg(d, 0x116, 0xf2); au0828_writereg(d, 0x117, 0x00); @@ -703,47 +848,83 @@ void au0828_analog_unregister(struct au0828_dev *dev) /* Usage lock check functions */ -static int res_get(struct au0828_fh *fh) +static int res_get(struct au0828_fh *fh, unsigned int bit) { - struct au0828_dev *dev = fh->dev; - int rc = 0; + struct au0828_dev *dev = fh->dev; - /* This instance already has stream_on */ - if (fh->stream_on) - return rc; + if (fh->resources & bit) + /* have it already allocated */ + return 1; - if (dev->stream_on) - return -EBUSY; + /* is it free? */ + mutex_lock(&dev->lock); + if (dev->resources & bit) { + /* no, someone else uses it */ + mutex_unlock(&dev->lock); + return 0; + } + /* it's free, grab it */ + fh->resources |= bit; + dev->resources |= bit; + dprintk(1, "res: get %d\n", bit); + mutex_unlock(&dev->lock); + return 1; +} - dev->stream_on = 1; - fh->stream_on = 1; - return rc; +static int res_check(struct au0828_fh *fh, unsigned int bit) +{ + return fh->resources & bit; } -static int res_check(struct au0828_fh *fh) +static int res_locked(struct au0828_dev *dev, unsigned int bit) { - return fh->stream_on; + return dev->resources & bit; } -static void res_free(struct au0828_fh *fh) +static void res_free(struct au0828_fh *fh, unsigned int bits) { - struct au0828_dev *dev = fh->dev; + struct au0828_dev *dev = fh->dev; - fh->stream_on = 0; - dev->stream_on = 0; + BUG_ON((fh->resources & bits) != bits); + + mutex_lock(&dev->lock); + fh->resources &= ~bits; + dev->resources &= ~bits; + dprintk(1, "res: put %d\n", bits); + mutex_unlock(&dev->lock); +} + +static int get_ressource(struct au0828_fh *fh) +{ + switch (fh->type) { + case V4L2_BUF_TYPE_VIDEO_CAPTURE: + return AU0828_RESOURCE_VIDEO; + case V4L2_BUF_TYPE_VBI_CAPTURE: + return AU0828_RESOURCE_VBI; + default: + BUG(); + return 0; + } } static int au0828_v4l2_open(struct file *filp) { int ret = 0; + struct video_device *vdev = video_devdata(filp); struct au0828_dev *dev = video_drvdata(filp); struct au0828_fh *fh; - int type = V4L2_BUF_TYPE_VIDEO_CAPTURE; + int type; -#ifdef VBI_IS_WORKING - if (video_devdata(filp)->vfl_type == VFL_TYPE_GRABBER) + switch (vdev->vfl_type) { + case VFL_TYPE_GRABBER: + type = V4L2_BUF_TYPE_VIDEO_CAPTURE; + break; + case VFL_TYPE_VBI: type = V4L2_BUF_TYPE_VBI_CAPTURE; -#endif + break; + default: + return -EINVAL; + } fh = kzalloc(sizeof(struct au0828_fh), GFP_KERNEL); if (NULL == fh) { @@ -781,10 +962,21 @@ static int au0828_v4l2_open(struct file *filp) dev->users++; videobuf_queue_vmalloc_init(&fh->vb_vidq, &au0828_video_qops, - NULL, &dev->slock, fh->type, + NULL, &dev->slock, + V4L2_BUF_TYPE_VIDEO_CAPTURE, V4L2_FIELD_INTERLACED, sizeof(struct au0828_buffer), fh); + /* VBI Setup */ + dev->vbi_width = 720; + dev->vbi_height = 1; + videobuf_queue_vmalloc_init(&fh->vb_vbiq, &au0828_vbi_qops, + NULL, &dev->slock, + V4L2_BUF_TYPE_VBI_CAPTURE, + V4L2_FIELD_SEQ_TB, + sizeof(struct au0828_buffer), fh); + + return ret; } @@ -794,17 +986,19 @@ static int au0828_v4l2_close(struct file *filp) struct au0828_fh *fh = filp->private_data; struct au0828_dev *dev = fh->dev; - mutex_lock(&dev->lock); - if (res_check(fh)) - res_free(fh); - - if (dev->users == 1) { + if (res_check(fh, AU0828_RESOURCE_VIDEO)) { videobuf_stop(&fh->vb_vidq); - videobuf_mmap_free(&fh->vb_vidq); + res_free(fh, AU0828_RESOURCE_VIDEO); + } + + if (res_check(fh, AU0828_RESOURCE_VBI)) { + videobuf_stop(&fh->vb_vbiq); + res_free(fh, AU0828_RESOURCE_VBI); + } + if (dev->users == 1) { if (dev->dev_state & DEV_DISCONNECTED) { au0828_analog_unregister(dev); - mutex_unlock(&dev->lock); kfree(dev); return 0; } @@ -823,10 +1017,11 @@ static int au0828_v4l2_close(struct file *filp) printk(KERN_INFO "Au0828 can't set alternate to 0!\n"); } + videobuf_mmap_free(&fh->vb_vidq); + videobuf_mmap_free(&fh->vb_vbiq); kfree(fh); dev->users--; wake_up_interruptible_nr(&dev->open, 1); - mutex_unlock(&dev->lock); return 0; } @@ -842,16 +1037,21 @@ static ssize_t au0828_v4l2_read(struct file *filp, char __user *buf, return rc; if (fh->type == V4L2_BUF_TYPE_VIDEO_CAPTURE) { - mutex_lock(&dev->lock); - rc = res_get(fh); - mutex_unlock(&dev->lock); - - if (unlikely(rc < 0)) - return rc; + if (res_locked(dev, AU0828_RESOURCE_VIDEO)) + return -EBUSY; return videobuf_read_stream(&fh->vb_vidq, buf, count, pos, 0, filp->f_flags & O_NONBLOCK); } + + if (fh->type == V4L2_BUF_TYPE_VBI_CAPTURE) { + if (!res_get(fh, AU0828_RESOURCE_VBI)) + return -EBUSY; + + return videobuf_read_stream(&fh->vb_vbiq, buf, count, pos, 0, + filp->f_flags & O_NONBLOCK); + } + return 0; } @@ -865,17 +1065,17 @@ static unsigned int au0828_v4l2_poll(struct file *filp, poll_table *wait) if (rc < 0) return rc; - mutex_lock(&dev->lock); - rc = res_get(fh); - mutex_unlock(&dev->lock); - - if (unlikely(rc < 0)) - return POLLERR; - - if (V4L2_BUF_TYPE_VIDEO_CAPTURE != fh->type) + if (fh->type == V4L2_BUF_TYPE_VIDEO_CAPTURE) { + if (!res_get(fh, AU0828_RESOURCE_VIDEO)) + return POLLERR; + return videobuf_poll_stream(filp, &fh->vb_vidq, wait); + } else if (fh->type == V4L2_BUF_TYPE_VBI_CAPTURE) { + if (!res_get(fh, AU0828_RESOURCE_VBI)) + return POLLERR; + return videobuf_poll_stream(filp, &fh->vb_vbiq, wait); + } else { return POLLERR; - - return videobuf_poll_stream(filp, &fh->vb_vidq, wait); + } } static int au0828_v4l2_mmap(struct file *filp, struct vm_area_struct *vma) @@ -888,14 +1088,10 @@ static int au0828_v4l2_mmap(struct file *filp, struct vm_area_struct *vma) if (rc < 0) return rc; - mutex_lock(&dev->lock); - rc = res_get(fh); - mutex_unlock(&dev->lock); - - if (unlikely(rc < 0)) - return rc; - - rc = videobuf_mmap_mapper(&fh->vb_vidq, vma); + if (fh->type == V4L2_BUF_TYPE_VIDEO_CAPTURE) + rc = videobuf_mmap_mapper(&fh->vb_vidq, vma); + else if (fh->type == V4L2_BUF_TYPE_VBI_CAPTURE) + rc = videobuf_mmap_mapper(&fh->vb_vbiq, vma); return rc; } @@ -911,14 +1107,6 @@ static int au0828_set_format(struct au0828_dev *dev, unsigned int cmd, maxwidth = 720; maxheight = 480; -#ifdef VBI_IS_WORKING - if (format->type == V4L2_BUF_TYPE_SLICED_VBI_CAPTURE) { - dprintk(1, "VBI format set: to be supported!\n"); - return 0; - } - if (format->type == V4L2_BUF_TYPE_VBI_CAPTURE) - return 0; -#endif if (format->type != V4L2_BUF_TYPE_VIDEO_CAPTURE) return -EINVAL; @@ -999,9 +1187,7 @@ static int vidioc_querycap(struct file *file, void *priv, /*set the device capabilities */ cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | -#ifdef VBI_IS_WORKING V4L2_CAP_VBI_CAPTURE | -#endif V4L2_CAP_AUDIO | V4L2_CAP_READWRITE | V4L2_CAP_STREAMING | @@ -1056,20 +1242,21 @@ static int vidioc_s_fmt_vid_cap(struct file *file, void *priv, struct au0828_dev *dev = fh->dev; int rc; + rc = check_dev(dev); + if (rc < 0) + return rc; + + mutex_lock(&dev->lock); + if (videobuf_queue_is_busy(&fh->vb_vidq)) { printk(KERN_INFO "%s queue busy\n", __func__); rc = -EBUSY; goto out; } - if (dev->stream_on && !fh->stream_on) { - printk(KERN_INFO "%s device in use by another fh\n", __func__); - rc = -EBUSY; - goto out; - } - - return au0828_set_format(dev, VIDIOC_S_FMT, f); + rc = au0828_set_format(dev, VIDIOC_S_FMT, f); out: + mutex_unlock(&dev->lock); return rc; } @@ -1300,6 +1487,29 @@ static int vidioc_s_frequency(struct file *file, void *priv, return 0; } + +/* RAW VBI ioctls */ + +static int vidioc_g_fmt_vbi_cap(struct file *file, void *priv, + struct v4l2_format *format) +{ + struct au0828_fh *fh = priv; + struct au0828_dev *dev = fh->dev; + + format->fmt.vbi.samples_per_line = dev->vbi_width; + format->fmt.vbi.sample_format = V4L2_PIX_FMT_GREY; + format->fmt.vbi.offset = 0; + format->fmt.vbi.flags = 0; + format->fmt.vbi.sampling_rate = 6750000 * 4 / 2; + + format->fmt.vbi.count[0] = dev->vbi_height; + format->fmt.vbi.count[1] = dev->vbi_height; + format->fmt.vbi.start[0] = 21; + format->fmt.vbi.start[1] = 284; + + return 0; +} + static int vidioc_g_chip_ident(struct file *file, void *priv, struct v4l2_dbg_chip_ident *chip) { @@ -1345,25 +1555,32 @@ static int vidioc_cropcap(struct file *file, void *priv, static int vidioc_streamon(struct file *file, void *priv, enum v4l2_buf_type type) { - struct au0828_fh *fh = priv; - struct au0828_dev *dev = fh->dev; - int rc; + struct au0828_fh *fh = priv; + struct au0828_dev *dev = fh->dev; + int rc = -EINVAL; rc = check_dev(dev); if (rc < 0) return rc; + if (unlikely(type != fh->type)) + return -EINVAL; + + dprintk(1, "vidioc_streamon fh=%p t=%d fh->res=%d dev->res=%d\n", + fh, type, fh->resources, dev->resources); + + if (unlikely(!res_get(fh, get_ressource(fh)))) + return -EBUSY; + if (type == V4L2_BUF_TYPE_VIDEO_CAPTURE) { au0828_analog_stream_enable(dev); v4l2_device_call_all(&dev->v4l2_dev, 0, video, s_stream, 1); } - mutex_lock(&dev->lock); - rc = res_get(fh); - - if (likely(rc >= 0)) + if (fh->type == V4L2_BUF_TYPE_VIDEO_CAPTURE) rc = videobuf_streamon(&fh->vb_vidq); - mutex_unlock(&dev->lock); + else if (fh->type == V4L2_BUF_TYPE_VBI_CAPTURE) + rc = videobuf_streamon(&fh->vb_vbiq); return rc; } @@ -1371,38 +1588,42 @@ static int vidioc_streamon(struct file *file, void *priv, static int vidioc_streamoff(struct file *file, void *priv, enum v4l2_buf_type type) { - struct au0828_fh *fh = priv; - struct au0828_dev *dev = fh->dev; - int i; - int ret; - int rc; + struct au0828_fh *fh = priv; + struct au0828_dev *dev = fh->dev; + int rc; + int i; rc = check_dev(dev); if (rc < 0) return rc; - if (fh->type != V4L2_BUF_TYPE_VIDEO_CAPTURE) + if (fh->type != V4L2_BUF_TYPE_VIDEO_CAPTURE && + fh->type != V4L2_BUF_TYPE_VBI_CAPTURE) return -EINVAL; if (type != fh->type) return -EINVAL; - if (type == V4L2_BUF_TYPE_VIDEO_CAPTURE) { + dprintk(1, "vidioc_streamoff fh=%p t=%d fh->res=%d dev->res=%d\n", + fh, type, fh->resources, dev->resources); + + if (fh->type == V4L2_BUF_TYPE_VIDEO_CAPTURE) { v4l2_device_call_all(&dev->v4l2_dev, 0, video, s_stream, 0); - ret = au0828_stream_interrupt(dev); - if (ret != 0) - return ret; - } + rc = au0828_stream_interrupt(dev); + if (rc != 0) + return rc; - for (i = 0; i < AU0828_MAX_INPUT; i++) { - if (AUVI_INPUT(i).audio_setup == NULL) - continue; - (AUVI_INPUT(i).audio_setup)(dev, 0); - } + for (i = 0; i < AU0828_MAX_INPUT; i++) { + if (AUVI_INPUT(i).audio_setup == NULL) + continue; + (AUVI_INPUT(i).audio_setup)(dev, 0); + } - mutex_lock(&dev->lock); - videobuf_streamoff(&fh->vb_vidq); - res_free(fh); - mutex_unlock(&dev->lock); + videobuf_streamoff(&fh->vb_vidq); + res_free(fh, AU0828_RESOURCE_VIDEO); + } else if (fh->type == V4L2_BUF_TYPE_VBI_CAPTURE) { + videobuf_streamoff(&fh->vb_vbiq); + res_free(fh, AU0828_RESOURCE_VBI); + } return 0; } @@ -1527,19 +1748,11 @@ static const struct v4l2_ioctl_ops video_ioctl_ops = { .vidioc_g_fmt_vid_cap = vidioc_g_fmt_vid_cap, .vidioc_try_fmt_vid_cap = vidioc_try_fmt_vid_cap, .vidioc_s_fmt_vid_cap = vidioc_s_fmt_vid_cap, -#ifdef VBI_IS_WORKING .vidioc_g_fmt_vbi_cap = vidioc_g_fmt_vbi_cap, - .vidioc_try_fmt_vbi_cap = vidioc_s_fmt_vbi_cap, - .vidioc_s_fmt_vbi_cap = vidioc_s_fmt_vbi_cap, -#endif + .vidioc_s_fmt_vbi_cap = vidioc_g_fmt_vbi_cap, .vidioc_g_audio = vidioc_g_audio, .vidioc_s_audio = vidioc_s_audio, .vidioc_cropcap = vidioc_cropcap, -#ifdef VBI_IS_WORKING - .vidioc_g_fmt_sliced_vbi_cap = vidioc_g_fmt_sliced_vbi_cap, - .vidioc_try_fmt_sliced_vbi_cap = vidioc_try_set_sliced_vbi_cap, - .vidioc_s_fmt_sliced_vbi_cap = vidioc_try_set_sliced_vbi_cap, -#endif .vidioc_reqbufs = vidioc_reqbufs, .vidioc_querybuf = vidioc_querybuf, .vidioc_qbuf = vidioc_qbuf, @@ -1621,8 +1834,11 @@ int au0828_analog_register(struct au0828_dev *dev, spin_lock_init(&dev->slock); mutex_init(&dev->lock); + /* init video dma queues */ INIT_LIST_HEAD(&dev->vidq.active); INIT_LIST_HEAD(&dev->vidq.queued); + INIT_LIST_HEAD(&dev->vbiq.active); + INIT_LIST_HEAD(&dev->vbiq.queued); dev->width = NTSC_STD_W; dev->height = NTSC_STD_H; @@ -1638,26 +1854,23 @@ int au0828_analog_register(struct au0828_dev *dev, return -ENOMEM; } -#ifdef VBI_IS_WORKING + /* allocate the VBI struct */ dev->vbi_dev = video_device_alloc(); if (NULL == dev->vbi_dev) { dprintk(1, "Can't allocate vbi_device.\n"); kfree(dev->vdev); return -ENOMEM; } -#endif /* Fill the video capture device struct */ *dev->vdev = au0828_video_template; dev->vdev->parent = &dev->usbdev->dev; strcpy(dev->vdev->name, "au0828a video"); -#ifdef VBI_IS_WORKING /* Setup the VBI device */ *dev->vbi_dev = au0828_video_template; dev->vbi_dev->parent = &dev->usbdev->dev; strcpy(dev->vbi_dev->name, "au0828a vbi"); -#endif /* Register the v4l2 device */ video_set_drvdata(dev->vdev, dev); @@ -1669,7 +1882,6 @@ int au0828_analog_register(struct au0828_dev *dev, return -ENODEV; } -#ifdef VBI_IS_WORKING /* Register the vbi device */ video_set_drvdata(dev->vbi_dev, dev); retval = video_register_device(dev->vbi_dev, VFL_TYPE_VBI, -1); @@ -1680,7 +1892,6 @@ int au0828_analog_register(struct au0828_dev *dev, video_device_release(dev->vdev); return -ENODEV; } -#endif dprintk(1, "%s completed!\n", __func__); diff --git a/drivers/media/video/au0828/au0828.h b/drivers/media/video/au0828/au0828.h index 207f32dec6a..9905bc4f5f5 100644 --- a/drivers/media/video/au0828/au0828.h +++ b/drivers/media/video/au0828/au0828.h @@ -60,6 +60,10 @@ #define AU0828_MAX_INPUT 4 +/* au0828 resource types (used for res_get/res_lock etc */ +#define AU0828_RESOURCE_VIDEO 0x01 +#define AU0828_RESOURCE_VBI 0x02 + enum au0828_itype { AU0828_VMUX_UNDEFINED = 0, AU0828_VMUX_COMPOSITE, @@ -115,8 +119,10 @@ enum au0828_dev_state { struct au0828_fh { struct au0828_dev *dev; - unsigned int stream_on:1; /* Locks streams */ + unsigned int resources; + struct videobuf_queue vb_vidq; + struct videobuf_queue vb_vbiq; enum v4l2_buf_type type; }; @@ -145,7 +151,8 @@ struct au0828_usb_isoc_ctl { int tmp_buf_len; /* Stores already requested buffers */ - struct au0828_buffer *buf; + struct au0828_buffer *buf; + struct au0828_buffer *vbi_buf; /* Stores the number of received fields */ int nfields; @@ -194,11 +201,14 @@ struct au0828_dev { /* Analog */ struct v4l2_device v4l2_dev; int users; - unsigned int stream_on:1; /* Locks streams */ + unsigned int resources; /* resources in use */ struct video_device *vdev; struct video_device *vbi_dev; int width; int height; + int vbi_width; + int vbi_height; + u32 vbi_read; u32 field_size; u32 frame_size; u32 bytesperline; @@ -219,6 +229,7 @@ struct au0828_dev { /* Isoc control struct */ struct au0828_dmaqueue vidq; + struct au0828_dmaqueue vbiq; struct au0828_usb_isoc_ctl isoc_ctl; spinlock_t slock; @@ -278,6 +289,9 @@ void au0828_analog_unregister(struct au0828_dev *dev); extern int au0828_dvb_register(struct au0828_dev *dev); extern void au0828_dvb_unregister(struct au0828_dev *dev); +/* au0828-vbi.c */ +extern struct videobuf_queue_ops au0828_vbi_qops; + #define dprintk(level, fmt, arg...)\ do { if (au0828_debug & level)\ printk(KERN_DEBUG DRIVER_NAME "/0: " fmt, ## arg);\ diff --git a/drivers/media/video/bt8xx/bttv-risc.c b/drivers/media/video/bt8xx/bttv-risc.c index c24b1c100e1..0fa9f39f37a 100644 --- a/drivers/media/video/bt8xx/bttv-risc.c +++ b/drivers/media/video/bt8xx/bttv-risc.c @@ -583,7 +583,7 @@ bttv_dma_free(struct videobuf_queue *q,struct bttv *btv, struct bttv_buffer *buf BUG_ON(in_interrupt()); videobuf_waiton(&buf->vb,0,0); - videobuf_dma_unmap(q, dma); + videobuf_dma_unmap(q->dev, dma); videobuf_dma_free(dma); btcx_riscmem_free(btv->c.pci,&buf->bottom); btcx_riscmem_free(btv->c.pci,&buf->top); diff --git a/drivers/media/video/cpia_usb.c b/drivers/media/video/cpia_usb.c index ef1f8939998..58d193ff591 100644 --- a/drivers/media/video/cpia_usb.c +++ b/drivers/media/video/cpia_usb.c @@ -584,7 +584,6 @@ static void cpia_disconnect(struct usb_interface *intf) { struct cam_data *cam = usb_get_intfdata(intf); struct usb_cpia *ucpia; - struct usb_device *udev; usb_set_intfdata(intf, NULL); if (!cam) @@ -606,8 +605,6 @@ static void cpia_disconnect(struct usb_interface *intf) if (waitqueue_active(&ucpia->wq_stream)) wake_up_interruptible(&ucpia->wq_stream); - udev = interface_to_usbdev(intf); - ucpia->curbuff = ucpia->workbuff = NULL; vfree(ucpia->buffers[2]); diff --git a/drivers/media/video/cx18/cx18-ioctl.c b/drivers/media/video/cx18/cx18-ioctl.c index 20eaf38ba95..d6792405f8d 100644 --- a/drivers/media/video/cx18/cx18-ioctl.c +++ b/drivers/media/video/cx18/cx18-ioctl.c @@ -1081,7 +1081,7 @@ long cx18_v4l2_ioctl(struct file *filp, unsigned int cmd, unsigned long arg) { struct video_device *vfd = video_devdata(filp); - struct cx18_open_id *id = (struct cx18_open_id *)filp->private_data; + struct cx18_open_id *id = filp->private_data; struct cx18 *cx = id->cx; long res; diff --git a/drivers/media/video/cx23885/cx23885-cards.c b/drivers/media/video/cx23885/cx23885-cards.c index d639186f645..2014daedee8 100644 --- a/drivers/media/video/cx23885/cx23885-cards.c +++ b/drivers/media/video/cx23885/cx23885-cards.c @@ -408,10 +408,18 @@ struct cx23885_subid cx23885_subids[] = { .card = CX23885_BOARD_HAUPPAUGE_HVR1275, }, { .subvendor = 0x0070, + .subdevice = 0x221d, + .card = CX23885_BOARD_HAUPPAUGE_HVR1275, + }, { + .subvendor = 0x0070, .subdevice = 0x2251, .card = CX23885_BOARD_HAUPPAUGE_HVR1255, }, { .subvendor = 0x0070, + .subdevice = 0x2259, + .card = CX23885_BOARD_HAUPPAUGE_HVR1255, + }, { + .subvendor = 0x0070, .subdevice = 0x2291, .card = CX23885_BOARD_HAUPPAUGE_HVR1210, }, { @@ -419,6 +427,38 @@ struct cx23885_subid cx23885_subids[] = { .subdevice = 0x2295, .card = CX23885_BOARD_HAUPPAUGE_HVR1210, }, { + .subvendor = 0x0070, + .subdevice = 0x2299, + .card = CX23885_BOARD_HAUPPAUGE_HVR1210, + }, { + .subvendor = 0x0070, + .subdevice = 0x229d, + .card = CX23885_BOARD_HAUPPAUGE_HVR1210, /* HVR1215 */ + }, { + .subvendor = 0x0070, + .subdevice = 0x22f0, + .card = CX23885_BOARD_HAUPPAUGE_HVR1210, + }, { + .subvendor = 0x0070, + .subdevice = 0x22f1, + .card = CX23885_BOARD_HAUPPAUGE_HVR1255, + }, { + .subvendor = 0x0070, + .subdevice = 0x22f2, + .card = CX23885_BOARD_HAUPPAUGE_HVR1275, + }, { + .subvendor = 0x0070, + .subdevice = 0x22f3, + .card = CX23885_BOARD_HAUPPAUGE_HVR1210, /* HVR1215 */ + }, { + .subvendor = 0x0070, + .subdevice = 0x22f4, + .card = CX23885_BOARD_HAUPPAUGE_HVR1210, + }, { + .subvendor = 0x0070, + .subdevice = 0x22f5, + .card = CX23885_BOARD_HAUPPAUGE_HVR1210, /* HVR1215 */ + }, { .subvendor = 0x14f1, .subdevice = 0x8651, .card = CX23885_BOARD_MYGICA_X8506, diff --git a/drivers/media/video/cx23885/cx23885-core.c b/drivers/media/video/cx23885/cx23885-core.c index 0dde57e96d3..ff76f64edac 100644 --- a/drivers/media/video/cx23885/cx23885-core.c +++ b/drivers/media/video/cx23885/cx23885-core.c @@ -1142,7 +1142,7 @@ void cx23885_free_buffer(struct videobuf_queue *q, struct cx23885_buffer *buf) BUG_ON(in_interrupt()); videobuf_waiton(&buf->vb, 0, 0); - videobuf_dma_unmap(q, dma); + videobuf_dma_unmap(q->dev, dma); videobuf_dma_free(dma); btcx_riscmem_free(to_pci_dev(q->dev), &buf->risc); buf->vb.state = VIDEOBUF_NEEDS_INIT; @@ -1953,8 +1953,12 @@ static int __devinit cx23885_initdev(struct pci_dev *pci_dev, goto fail_irq; } - err = request_irq(pci_dev->irq, cx23885_irq, - IRQF_SHARED | IRQF_DISABLED, dev->name, dev); + if (!pci_enable_msi(pci_dev)) + err = request_irq(pci_dev->irq, cx23885_irq, + IRQF_DISABLED, dev->name, dev); + else + err = request_irq(pci_dev->irq, cx23885_irq, + IRQF_SHARED | IRQF_DISABLED, dev->name, dev); if (err < 0) { printk(KERN_ERR "%s: can't get IRQ %d\n", dev->name, pci_dev->irq); @@ -2000,6 +2004,7 @@ static void __devexit cx23885_finidev(struct pci_dev *pci_dev) /* unregister stuff */ free_irq(pci_dev->irq, dev); + pci_disable_msi(pci_dev); cx23885_dev_unregister(dev); v4l2_device_unregister(v4l2_dev); diff --git a/drivers/media/video/cx23885/cx23885-dvb.c b/drivers/media/video/cx23885/cx23885-dvb.c index 0a199d774d9..3d70af28388 100644 --- a/drivers/media/video/cx23885/cx23885-dvb.c +++ b/drivers/media/video/cx23885/cx23885-dvb.c @@ -991,7 +991,7 @@ static int dvb_register(struct cx23885_tsport *port) ret = videobuf_dvb_register_bus(&port->frontends, THIS_MODULE, port, &dev->pci->dev, adapter_nr, 0, cx23885_dvb_fe_ioctl_override); - if (!ret) + if (ret) return ret; /* init CI & MAC */ diff --git a/drivers/media/video/cx23885/cx23885-input.c b/drivers/media/video/cx23885/cx23885-input.c index 5de6ba98f7a..d0b1613ede2 100644 --- a/drivers/media/video/cx23885/cx23885-input.c +++ b/drivers/media/video/cx23885/cx23885-input.c @@ -37,161 +37,55 @@ #include <linux/input.h> #include <linux/slab.h> -#include <media/ir-common.h> +#include <media/ir-core.h> #include <media/v4l2-subdev.h> #include "cx23885.h" -#define RC5_BITS 14 -#define RC5_HALF_BITS (2*RC5_BITS) -#define RC5_HALF_BITS_MASK ((1 << RC5_HALF_BITS) - 1) - -#define RC5_START_BITS_NORMAL 0x3 /* Command range 0 - 63 */ -#define RC5_START_BITS_EXTENDED 0x2 /* Command range 64 - 127 */ - -#define RC5_EXTENDED_COMMAND_OFFSET 64 - #define MODULE_NAME "cx23885" -static inline unsigned int rc5_command(u32 rc5_baseband) +static void convert_measurement(u32 x, struct ir_raw_event *y) { - return RC5_INSTR(rc5_baseband) + - ((RC5_START(rc5_baseband) == RC5_START_BITS_EXTENDED) - ? RC5_EXTENDED_COMMAND_OFFSET : 0); -} - -static void cx23885_input_process_raw_rc5(struct cx23885_dev *dev) -{ - struct card_ir *ir_input = dev->ir_input; - unsigned int code, command; - u32 rc5; - - /* Ignore codes that are too short to be valid RC-5 */ - if (ir_input->last_bit < (RC5_HALF_BITS - 1)) - return; - - /* The library has the manchester coding backwards; XOR to adapt. */ - code = (ir_input->code & RC5_HALF_BITS_MASK) ^ RC5_HALF_BITS_MASK; - rc5 = ir_rc5_decode(code); - - switch (RC5_START(rc5)) { - case RC5_START_BITS_NORMAL: - break; - case RC5_START_BITS_EXTENDED: - /* Don't allow if the remote only emits standard commands */ - if (ir_input->start == RC5_START_BITS_NORMAL) - return; - break; - default: + if (x == V4L2_SUBDEV_IR_PULSE_RX_SEQ_END) { + y->pulse = false; + y->duration = V4L2_SUBDEV_IR_PULSE_MAX_WIDTH_NS; return; } - if (ir_input->addr != RC5_ADDR(rc5)) - return; - - /* Don't generate a keypress for RC-5 auto-repeated keypresses */ - command = rc5_command(rc5); - if (RC5_TOGGLE(rc5) != RC5_TOGGLE(ir_input->last_rc5) || - command != rc5_command(ir_input->last_rc5) || - /* Catch T == 0, CMD == 0 (e.g. '0') as first keypress after init */ - RC5_START(ir_input->last_rc5) == 0) { - /* This keypress is differnet: not an auto repeat */ - ir_input_nokey(ir_input->dev, &ir_input->ir); - ir_input_keydown(ir_input->dev, &ir_input->ir, command); - } - ir_input->last_rc5 = rc5; - - /* Schedule when we should do the key up event: ir_input_nokey() */ - mod_timer(&ir_input->timer_keyup, - jiffies + msecs_to_jiffies(ir_input->rc5_key_timeout)); + y->pulse = (x & V4L2_SUBDEV_IR_PULSE_LEVEL_MASK) ? true : false; + y->duration = x & V4L2_SUBDEV_IR_PULSE_MAX_WIDTH_NS; } -static void cx23885_input_next_pulse_width_rc5(struct cx23885_dev *dev, - u32 ns_pulse) +static void cx23885_input_process_measurements(struct cx23885_dev *dev, + bool overrun) { - const int rc5_quarterbit_ns = 444444; /* 32 cycles/36 kHz/2 = 444 us */ - struct card_ir *ir_input = dev->ir_input; - int i, level, quarterbits, halfbits; - - if (!ir_input->active) { - ir_input->active = 1; - /* assume an initial space that we may not detect or measure */ - ir_input->code = 0; - ir_input->last_bit = 0; - } + struct cx23885_kernel_ir *kernel_ir = dev->kernel_ir; + struct ir_raw_event kernel_ir_event; - if (ns_pulse == V4L2_SUBDEV_IR_PULSE_RX_SEQ_END) { - ir_input->last_bit++; /* Account for the final space */ - ir_input->active = 0; - cx23885_input_process_raw_rc5(dev); - return; - } - - level = (ns_pulse & V4L2_SUBDEV_IR_PULSE_LEVEL_MASK) ? 1 : 0; - - /* Skip any leading space to sync to the start bit */ - if (ir_input->last_bit == 0 && level == 0) - return; - - /* - * With valid RC-5 we can get up to two consecutive half-bits in a - * single pulse measurment. Experiments have shown that the duration - * of a half-bit can vary. Make sure we always end up with an even - * number of quarter bits at the same level (mark or space). - */ - ns_pulse &= V4L2_SUBDEV_IR_PULSE_MAX_WIDTH_NS; - quarterbits = ns_pulse / rc5_quarterbit_ns; - if (quarterbits & 1) - quarterbits++; - halfbits = quarterbits / 2; - - for (i = 0; i < halfbits; i++) { - ir_input->last_bit++; - ir_input->code |= (level << ir_input->last_bit); - - if (ir_input->last_bit >= RC5_HALF_BITS-1) { - ir_input->active = 0; - cx23885_input_process_raw_rc5(dev); - /* - * If level is 1, a leading mark is invalid for RC5. - * If level is 0, we scan past extra intial space. - * Either way we don't want to reactivate collecting - * marks or spaces here with any left over half-bits. - */ - break; - } - } -} - -static void cx23885_input_process_pulse_widths_rc5(struct cx23885_dev *dev, - bool add_eom) -{ - struct card_ir *ir_input = dev->ir_input; - struct ir_input_state *ir_input_state = &ir_input->ir; - - u32 ns_pulse[RC5_HALF_BITS+1]; - ssize_t num = 0; + u32 sd_ir_data[64]; + ssize_t num; int count, i; + bool handle = false; do { - v4l2_subdev_call(dev->sd_ir, ir, rx_read, (u8 *) ns_pulse, - sizeof(ns_pulse), &num); + num = 0; + v4l2_subdev_call(dev->sd_ir, ir, rx_read, (u8 *) sd_ir_data, + sizeof(sd_ir_data), &num); count = num / sizeof(u32); - /* Append an end of Rx seq, if the caller requested */ - if (add_eom && count < ARRAY_SIZE(ns_pulse)) { - ns_pulse[count] = V4L2_SUBDEV_IR_PULSE_RX_SEQ_END; - count++; + for (i = 0; i < count; i++) { + convert_measurement(sd_ir_data[i], &kernel_ir_event); + ir_raw_event_store(kernel_ir->inp_dev, + &kernel_ir_event); + handle = true; } - - /* Just drain the Rx FIFO, if we're called, but not RC-5 */ - if (ir_input_state->ir_type != IR_TYPE_RC5) - continue; - - for (i = 0; i < count; i++) - cx23885_input_next_pulse_width_rc5(dev, ns_pulse[i]); } while (num != 0); + + if (overrun) + ir_raw_event_reset(kernel_ir->inp_dev); + else if (handle) + ir_raw_event_handle(kernel_ir->inp_dev); } void cx23885_input_rx_work_handler(struct cx23885_dev *dev, u32 events) @@ -230,7 +124,7 @@ void cx23885_input_rx_work_handler(struct cx23885_dev *dev, u32 events) } if (data_available) - cx23885_input_process_pulse_widths_rc5(dev, overrun); + cx23885_input_process_measurements(dev, overrun); if (overrun) { /* If there was a FIFO overrun, clear & restart the device */ @@ -241,34 +135,15 @@ void cx23885_input_rx_work_handler(struct cx23885_dev *dev, u32 events) } } -static void cx23885_input_ir_start(struct cx23885_dev *dev) +static int cx23885_input_ir_start(struct cx23885_dev *dev) { - struct card_ir *ir_input = dev->ir_input; - struct ir_input_state *ir_input_state = &ir_input->ir; struct v4l2_subdev_ir_parameters params; if (dev->sd_ir == NULL) - return; + return -ENODEV; atomic_set(&dev->ir_input_stopping, 0); - /* keyup timer set up, if needed */ - switch (dev->board) { - case CX23885_BOARD_HAUPPAUGE_HVR1850: - case CX23885_BOARD_HAUPPAUGE_HVR1290: - setup_timer(&ir_input->timer_keyup, - ir_rc5_timer_keyup, /* Not actually RC-5 specific */ - (unsigned long) ir_input); - if (ir_input_state->ir_type == IR_TYPE_RC5) { - /* - * RC-5 repeats a held key every - * 64 bits * (2 * 32/36000) sec/bit = 113.778 ms - */ - ir_input->rc5_key_timeout = 115; - } - break; - } - v4l2_subdev_call(dev->sd_ir, ir, rx_g_parameters, ¶ms); switch (dev->board) { case CX23885_BOARD_HAUPPAUGE_HVR1850: @@ -299,11 +174,21 @@ static void cx23885_input_ir_start(struct cx23885_dev *dev) break; } v4l2_subdev_call(dev->sd_ir, ir, rx_s_parameters, ¶ms); + return 0; +} + +static int cx23885_input_ir_open(void *priv) +{ + struct cx23885_kernel_ir *kernel_ir = priv; + + if (kernel_ir->cx == NULL) + return -ENODEV; + + return cx23885_input_ir_start(kernel_ir->cx); } static void cx23885_input_ir_stop(struct cx23885_dev *dev) { - struct card_ir *ir_input = dev->ir_input; struct v4l2_subdev_ir_parameters params; if (dev->sd_ir == NULL) @@ -327,21 +212,26 @@ static void cx23885_input_ir_stop(struct cx23885_dev *dev) } flush_scheduled_work(); +} - switch (dev->board) { - case CX23885_BOARD_HAUPPAUGE_HVR1850: - case CX23885_BOARD_HAUPPAUGE_HVR1290: - del_timer_sync(&ir_input->timer_keyup); - break; - } +static void cx23885_input_ir_close(void *priv) +{ + struct cx23885_kernel_ir *kernel_ir = priv; + + if (kernel_ir->cx != NULL) + cx23885_input_ir_stop(kernel_ir->cx); } int cx23885_input_init(struct cx23885_dev *dev) { - struct card_ir *ir; - struct input_dev *input_dev; - char *ir_codes = NULL; - int ir_type, ir_addr, ir_start; + struct cx23885_kernel_ir *kernel_ir; + struct input_dev *inp_dev; + struct ir_dev_props *props; + + char *rc_map; + enum rc_driver_type driver_type; + unsigned long allowed_protos; + int ret; /* @@ -354,53 +244,59 @@ int cx23885_input_init(struct cx23885_dev *dev) switch (dev->board) { case CX23885_BOARD_HAUPPAUGE_HVR1850: case CX23885_BOARD_HAUPPAUGE_HVR1290: - /* Parameters for the grey Hauppauge remote for the HVR-1850 */ - ir_codes = RC_MAP_HAUPPAUGE_NEW; - ir_type = IR_TYPE_RC5; - ir_addr = 0x1e; /* RC-5 system bits emitted by the remote */ - ir_start = RC5_START_BITS_NORMAL; /* A basic RC-5 remote */ + /* Integrated CX23888 IR controller */ + driver_type = RC_DRIVER_IR_RAW; + allowed_protos = IR_TYPE_ALL; + /* The grey Hauppauge RC-5 remote */ + rc_map = RC_MAP_RC5_HAUPPAUGE_NEW; break; - } - if (ir_codes == NULL) + default: return -ENODEV; - - ir = kzalloc(sizeof(*ir), GFP_KERNEL); - input_dev = input_allocate_device(); - if (!ir || !input_dev) { - ret = -ENOMEM; - goto err_out_free; } - ir->dev = input_dev; - ir->addr = ir_addr; - ir->start = ir_start; + /* cx23885 board instance kernel IR state */ + kernel_ir = kzalloc(sizeof(struct cx23885_kernel_ir), GFP_KERNEL); + if (kernel_ir == NULL) + return -ENOMEM; - /* init input device */ - snprintf(ir->name, sizeof(ir->name), "cx23885 IR (%s)", - cx23885_boards[dev->board].name); - snprintf(ir->phys, sizeof(ir->phys), "pci-%s/ir0", pci_name(dev->pci)); + kernel_ir->cx = dev; + kernel_ir->name = kasprintf(GFP_KERNEL, "cx23885 IR (%s)", + cx23885_boards[dev->board].name); + kernel_ir->phys = kasprintf(GFP_KERNEL, "pci-%s/ir0", + pci_name(dev->pci)); - ret = ir_input_init(input_dev, &ir->ir, ir_type); - if (ret < 0) + /* input device */ + inp_dev = input_allocate_device(); + if (inp_dev == NULL) { + ret = -ENOMEM; goto err_out_free; + } - input_dev->name = ir->name; - input_dev->phys = ir->phys; - input_dev->id.bustype = BUS_PCI; - input_dev->id.version = 1; + kernel_ir->inp_dev = inp_dev; + inp_dev->name = kernel_ir->name; + inp_dev->phys = kernel_ir->phys; + inp_dev->id.bustype = BUS_PCI; + inp_dev->id.version = 1; if (dev->pci->subsystem_vendor) { - input_dev->id.vendor = dev->pci->subsystem_vendor; - input_dev->id.product = dev->pci->subsystem_device; + inp_dev->id.vendor = dev->pci->subsystem_vendor; + inp_dev->id.product = dev->pci->subsystem_device; } else { - input_dev->id.vendor = dev->pci->vendor; - input_dev->id.product = dev->pci->device; + inp_dev->id.vendor = dev->pci->vendor; + inp_dev->id.product = dev->pci->device; } - input_dev->dev.parent = &dev->pci->dev; - - dev->ir_input = ir; - cx23885_input_ir_start(dev); - - ret = ir_input_register(ir->dev, ir_codes, NULL, MODULE_NAME); + inp_dev->dev.parent = &dev->pci->dev; + + /* kernel ir device properties */ + props = &kernel_ir->props; + props->driver_type = driver_type; + props->allowed_protos = allowed_protos; + props->priv = kernel_ir; + props->open = cx23885_input_ir_open; + props->close = cx23885_input_ir_close; + + /* Go */ + dev->kernel_ir = kernel_ir; + ret = ir_input_register(inp_dev, rc_map, props, MODULE_NAME); if (ret) goto err_out_stop; @@ -408,9 +304,12 @@ int cx23885_input_init(struct cx23885_dev *dev) err_out_stop: cx23885_input_ir_stop(dev); - dev->ir_input = NULL; + dev->kernel_ir = NULL; + /* TODO: double check clean-up of kernel_ir->inp_dev */ err_out_free: - kfree(ir); + kfree(kernel_ir->phys); + kfree(kernel_ir->name); + kfree(kernel_ir); return ret; } @@ -419,9 +318,11 @@ void cx23885_input_fini(struct cx23885_dev *dev) /* Always stop the IR hardware from generating interrupts */ cx23885_input_ir_stop(dev); - if (dev->ir_input == NULL) + if (dev->kernel_ir == NULL) return; - ir_input_unregister(dev->ir_input->dev); - kfree(dev->ir_input); - dev->ir_input = NULL; + ir_input_unregister(dev->kernel_ir->inp_dev); + kfree(dev->kernel_ir->phys); + kfree(dev->kernel_ir->name); + kfree(dev->kernel_ir); + dev->kernel_ir = NULL; } diff --git a/drivers/media/video/cx23885/cx23885-ir.c b/drivers/media/video/cx23885/cx23885-ir.c index 9a677eb080a..6ceabd4fba0 100644 --- a/drivers/media/video/cx23885/cx23885-ir.c +++ b/drivers/media/video/cx23885/cx23885-ir.c @@ -53,7 +53,7 @@ void cx23885_ir_rx_work_handler(struct work_struct *work) if (events == 0) return; - if (dev->ir_input) + if (dev->kernel_ir) cx23885_input_rx_work_handler(dev, events); } diff --git a/drivers/media/video/cx23885/cx23885.h b/drivers/media/video/cx23885/cx23885.h index 8d6a55e54ee..a33f2b71467 100644 --- a/drivers/media/video/cx23885/cx23885.h +++ b/drivers/media/video/cx23885/cx23885.h @@ -30,6 +30,7 @@ #include <media/tveeprom.h> #include <media/videobuf-dma-sg.h> #include <media/videobuf-dvb.h> +#include <media/ir-core.h> #include "btcx-risc.h" #include "cx23885-reg.h" @@ -304,6 +305,15 @@ struct cx23885_tsport { void *port_priv; }; +struct cx23885_kernel_ir { + struct cx23885_dev *cx; + char *name; + char *phys; + + struct input_dev *inp_dev; + struct ir_dev_props props; +}; + struct cx23885_dev { atomic_t refcount; struct v4l2_device v4l2_dev; @@ -363,7 +373,7 @@ struct cx23885_dev { struct work_struct ir_tx_work; unsigned long ir_tx_notifications; - struct card_ir *ir_input; + struct cx23885_kernel_ir *kernel_ir; atomic_t ir_input_stopping; /* V4l */ diff --git a/drivers/media/video/cx88/cx88-alsa.c b/drivers/media/video/cx88/cx88-alsa.c index 33082c96745..4f383cdf529 100644 --- a/drivers/media/video/cx88/cx88-alsa.c +++ b/drivers/media/video/cx88/cx88-alsa.c @@ -54,6 +54,12 @@ Data type declarations - Can be moded to a header file later ****************************************************************************/ +struct cx88_audio_buffer { + unsigned int bpl; + struct btcx_riscmem risc; + struct videobuf_dmabuf dma; +}; + struct cx88_audio_dev { struct cx88_core *core; struct cx88_dmaqueue q; @@ -75,7 +81,7 @@ struct cx88_audio_dev { struct videobuf_dmabuf *dma_risc; - struct cx88_buffer *buf; + struct cx88_audio_buffer *buf; struct snd_pcm_substream *substream; }; @@ -123,7 +129,7 @@ MODULE_PARM_DESC(debug,"enable debug messages"); static int _cx88_start_audio_dma(snd_cx88_card_t *chip) { - struct cx88_buffer *buf = chip->buf; + struct cx88_audio_buffer *buf = chip->buf; struct cx88_core *core=chip->core; struct sram_channel *audio_ch = &cx88_sram_channels[SRAM_CH25]; @@ -283,7 +289,7 @@ static int dsp_buffer_free(snd_cx88_card_t *chip) BUG_ON(!chip->dma_size); dprintk(2,"Freeing buffer\n"); - videobuf_sg_dma_unmap(&chip->pci->dev, chip->dma_risc); + videobuf_dma_unmap(&chip->pci->dev, chip->dma_risc); videobuf_dma_free(chip->dma_risc); btcx_riscmem_free(chip->pci,&chip->buf->risc); kfree(chip->buf); @@ -376,7 +382,7 @@ static int snd_cx88_hw_params(struct snd_pcm_substream * substream, snd_cx88_card_t *chip = snd_pcm_substream_chip(substream); struct videobuf_dmabuf *dma; - struct cx88_buffer *buf; + struct cx88_audio_buffer *buf; int ret; if (substream->runtime->dma_area) { @@ -391,30 +397,25 @@ static int snd_cx88_hw_params(struct snd_pcm_substream * substream, BUG_ON(!chip->dma_size); BUG_ON(chip->num_periods & (chip->num_periods-1)); - buf = videobuf_sg_alloc(sizeof(*buf)); + buf = kzalloc(sizeof(*buf), GFP_KERNEL); if (NULL == buf) return -ENOMEM; - buf->vb.memory = V4L2_MEMORY_MMAP; - buf->vb.field = V4L2_FIELD_NONE; - buf->vb.width = chip->period_size; - buf->bpl = chip->period_size; - buf->vb.height = chip->num_periods; - buf->vb.size = chip->dma_size; + buf->bpl = chip->period_size; - dma = videobuf_to_dma(&buf->vb); + dma = &buf->dma; videobuf_dma_init(dma); ret = videobuf_dma_init_kernel(dma, PCI_DMA_FROMDEVICE, - (PAGE_ALIGN(buf->vb.size) >> PAGE_SHIFT)); + (PAGE_ALIGN(chip->dma_size) >> PAGE_SHIFT)); if (ret < 0) goto error; - ret = videobuf_sg_dma_map(&chip->pci->dev, dma); + ret = videobuf_dma_map(&chip->pci->dev, dma); if (ret < 0) goto error; ret = cx88_risc_databuffer(chip->pci, &buf->risc, dma->sglist, - buf->vb.width, buf->vb.height, 1); + chip->period_size, chip->num_periods, 1); if (ret < 0) goto error; @@ -422,12 +423,10 @@ static int snd_cx88_hw_params(struct snd_pcm_substream * substream, buf->risc.jmp[0] = cpu_to_le32(RISC_JUMP|RISC_IRQ1|RISC_CNT_INC); buf->risc.jmp[1] = cpu_to_le32(buf->risc.dma); - buf->vb.state = VIDEOBUF_PREPARED; - chip->buf = buf; chip->dma_risc = dma; - substream->runtime->dma_area = chip->dma_risc->vmalloc; + substream->runtime->dma_area = chip->dma_risc->vaddr; substream->runtime->dma_bytes = chip->dma_size; substream->runtime->dma_addr = 0; return 0; @@ -740,7 +739,7 @@ static int __devinit snd_cx88_create(struct snd_card *card, pci_set_master(pci); - chip = (snd_cx88_card_t *) card->private_data; + chip = card->private_data; core = cx88_core_get(pci); if (NULL == core) { diff --git a/drivers/media/video/cx88/cx88-cards.c b/drivers/media/video/cx88/cx88-cards.c index 2918a6e38fe..e8416b76da6 100644 --- a/drivers/media/video/cx88/cx88-cards.c +++ b/drivers/media/video/cx88/cx88-cards.c @@ -45,6 +45,10 @@ static unsigned int latency = UNSET; module_param(latency,int,0444); MODULE_PARM_DESC(latency,"pci latency timer"); +static int disable_ir; +module_param(disable_ir, int, 0444); +MODULE_PARM_DESC(latency, "Disable IR support"); + #define info_printk(core, fmt, arg...) \ printk(KERN_INFO "%s: " fmt, core->name , ## arg) @@ -3498,7 +3502,10 @@ struct cx88_core *cx88_core_create(struct pci_dev *pci, int nr) } cx88_card_setup(core); - cx88_ir_init(core, pci); + if (!disable_ir) { + cx88_i2c_init_ir(core); + cx88_ir_init(core, pci); + } return core; } diff --git a/drivers/media/video/cx88/cx88-core.c b/drivers/media/video/cx88/cx88-core.c index 8b21457111b..85eb266fb35 100644 --- a/drivers/media/video/cx88/cx88-core.c +++ b/drivers/media/video/cx88/cx88-core.c @@ -218,7 +218,7 @@ cx88_free_buffer(struct videobuf_queue *q, struct cx88_buffer *buf) BUG_ON(in_interrupt()); videobuf_waiton(&buf->vb,0,0); - videobuf_dma_unmap(q, dma); + videobuf_dma_unmap(q->dev, dma); videobuf_dma_free(dma); btcx_riscmem_free(to_pci_dev(q->dev), &buf->risc); buf->vb.state = VIDEOBUF_NEEDS_INIT; diff --git a/drivers/media/video/cx88/cx88-i2c.c b/drivers/media/video/cx88/cx88-i2c.c index fb39f118455..375ad53f796 100644 --- a/drivers/media/video/cx88/cx88-i2c.c +++ b/drivers/media/video/cx88/cx88-i2c.c @@ -181,6 +181,11 @@ int cx88_i2c_init(struct cx88_core *core, struct pci_dev *pci) } else printk("%s: i2c register FAILED\n", core->name); + return core->i2c_rc; +} + +void cx88_i2c_init_ir(struct cx88_core *core) +{ /* Instantiate the IR receiver device, if present */ if (0 == core->i2c_rc) { struct i2c_board_info info; @@ -207,7 +212,6 @@ int cx88_i2c_init(struct cx88_core *core, struct pci_dev *pci) } } } - return core->i2c_rc; } /* ----------------------------------------------------------------------- */ diff --git a/drivers/media/video/cx88/cx88-input.c b/drivers/media/video/cx88/cx88-input.c index e185289e446..eccc5e49a35 100644 --- a/drivers/media/video/cx88/cx88-input.c +++ b/drivers/media/video/cx88/cx88-input.c @@ -30,6 +30,7 @@ #include <linux/module.h> #include "cx88.h" +#include <media/ir-core.h> #include <media/ir-common.h> #define MODULE_NAME "cx88xx" @@ -39,8 +40,8 @@ struct cx88_IR { struct cx88_core *core; struct input_dev *input; - struct ir_input_state ir; struct ir_dev_props props; + u64 ir_type; int users; @@ -51,7 +52,6 @@ struct cx88_IR { u32 sampling; u32 samples[16]; int scount; - unsigned long release; /* poll external decoder */ int polling; @@ -125,29 +125,21 @@ static void cx88_ir_handle_key(struct cx88_IR *ir) data = (data << 4) | ((gpio_key & 0xf0) >> 4); - ir_input_keydown(ir->input, &ir->ir, data); - ir_input_nokey(ir->input, &ir->ir); + ir_keydown(ir->input, data, 0); } else if (ir->mask_keydown) { /* bit set on keydown */ - if (gpio & ir->mask_keydown) { - ir_input_keydown(ir->input, &ir->ir, data); - } else { - ir_input_nokey(ir->input, &ir->ir); - } + if (gpio & ir->mask_keydown) + ir_keydown(ir->input, data, 0); } else if (ir->mask_keyup) { /* bit cleared on keydown */ - if (0 == (gpio & ir->mask_keyup)) { - ir_input_keydown(ir->input, &ir->ir, data); - } else { - ir_input_nokey(ir->input, &ir->ir); - } + if (0 == (gpio & ir->mask_keyup)) + ir_keydown(ir->input, data, 0); } else { /* can't distinguish keydown/up :-/ */ - ir_input_keydown(ir->input, &ir->ir, data); - ir_input_nokey(ir->input, &ir->ir); + ir_keydown(ir->input, data, 0); } } @@ -439,9 +431,7 @@ int cx88_ir_init(struct cx88_core *core, struct pci_dev *pci) snprintf(ir->name, sizeof(ir->name), "cx88 IR (%s)", core->board.name); snprintf(ir->phys, sizeof(ir->phys), "pci-%s/ir0", pci_name(pci)); - err = ir_input_init(input_dev, &ir->ir, ir_type); - if (err < 0) - goto err_out_free; + ir->ir_type = ir_type; input_dev->name = ir->name; input_dev->phys = ir->phys; @@ -516,8 +506,6 @@ void cx88_ir_irq(struct cx88_core *core) } if (!ir->scount) { /* nothing to sample */ - if (ir->ir.keypressed && time_after(jiffies, ir->release)) - ir_input_nokey(ir->input, &ir->ir); return; } @@ -553,7 +541,7 @@ void cx88_ir_irq(struct cx88_core *core) if (ircode == 0) { /* key still pressed */ ir_dprintk("pulse distance decoded repeat code\n"); - ir->release = jiffies + msecs_to_jiffies(120); + ir_repeat(ir->input); break; } @@ -567,10 +555,8 @@ void cx88_ir_irq(struct cx88_core *core) break; } - ir_dprintk("Key Code: %x\n", (ircode >> 16) & 0x7f); - - ir_input_keydown(ir->input, &ir->ir, (ircode >> 16) & 0x7f); - ir->release = jiffies + msecs_to_jiffies(120); + ir_dprintk("Key Code: %x\n", (ircode >> 16) & 0xff); + ir_keydown(ir->input, (ircode >> 16) & 0xff, 0); break; case CX88_BOARD_HAUPPAUGE: case CX88_BOARD_HAUPPAUGE_DVB_T1: @@ -606,16 +592,16 @@ void cx88_ir_irq(struct cx88_core *core) if ( dev != 0x1e && dev != 0x1f ) /* not a hauppauge remote */ break; - ir_input_keydown(ir->input, &ir->ir, code); - ir->release = jiffies + msecs_to_jiffies(120); + ir_keydown(ir->input, code, toggle); break; case CX88_BOARD_PINNACLE_PCTV_HD_800i: ircode = ir_decode_biphase(ir->samples, ir->scount, 5, 7); ir_dprintk("biphase decoded: %x\n", ircode); if ((ircode & 0xfffff000) != 0x3000) break; - ir_input_keydown(ir->input, &ir->ir, ircode & 0x3f); - ir->release = jiffies + msecs_to_jiffies(120); + /* Note: bit 0x800 being the toggle is assumed, not checked + with real hardware */ + ir_keydown(ir->input, ircode & 0x3f, ircode & 0x0800 ? 1 : 0); break; } diff --git a/drivers/media/video/cx88/cx88.h b/drivers/media/video/cx88/cx88.h index bdb03d33653..33d161a1172 100644 --- a/drivers/media/video/cx88/cx88.h +++ b/drivers/media/video/cx88/cx88.h @@ -636,6 +636,7 @@ extern struct videobuf_queue_ops cx8800_vbi_qops; /* cx88-i2c.c */ extern int cx88_i2c_init(struct cx88_core *core, struct pci_dev *pci); +extern void cx88_i2c_init_ir(struct cx88_core *core); /* ----------------------------------------------------------- */ diff --git a/drivers/media/video/dabusb.c b/drivers/media/video/dabusb.c index 0f505086774..5b176bd7afd 100644 --- a/drivers/media/video/dabusb.c +++ b/drivers/media/video/dabusb.c @@ -706,16 +706,11 @@ static long dabusb_ioctl (struct file *file, unsigned int cmd, unsigned long arg switch (cmd) { case IOCTL_DAB_BULK: - pbulk = kmalloc(sizeof (bulk_transfer_t), GFP_KERNEL); + pbulk = memdup_user((void __user *)arg, + sizeof(bulk_transfer_t)); - if (!pbulk) { - ret = -ENOMEM; - break; - } - - if (copy_from_user (pbulk, (void __user *) arg, sizeof (bulk_transfer_t))) { - ret = -EFAULT; - kfree (pbulk); + if (IS_ERR(pbulk)) { + ret = PTR_ERR(pbulk); break; } diff --git a/drivers/media/video/davinci/Kconfig b/drivers/media/video/davinci/Kconfig new file mode 100644 index 00000000000..6b195403564 --- /dev/null +++ b/drivers/media/video/davinci/Kconfig @@ -0,0 +1,93 @@ +config DISPLAY_DAVINCI_DM646X_EVM + tristate "DM646x EVM Video Display" + depends on VIDEO_DEV && MACH_DAVINCI_DM6467_EVM + select VIDEOBUF_DMA_CONTIG + select VIDEO_DAVINCI_VPIF + select VIDEO_ADV7343 + select VIDEO_THS7303 + help + Support for DM6467 based display device. + + To compile this driver as a module, choose M here: the + module will be called vpif_display. + +config CAPTURE_DAVINCI_DM646X_EVM + tristate "DM646x EVM Video Capture" + depends on VIDEO_DEV && MACH_DAVINCI_DM6467_EVM + select VIDEOBUF_DMA_CONTIG + select VIDEO_DAVINCI_VPIF + help + Support for DM6467 based capture device. + + To compile this driver as a module, choose M here: the + module will be called vpif_capture. + +config VIDEO_DAVINCI_VPIF + tristate "DaVinci VPIF Driver" + depends on DISPLAY_DAVINCI_DM646X_EVM + help + Support for DaVinci VPIF Driver. + + To compile this driver as a module, choose M here: the + module will be called vpif. + +config VIDEO_VPSS_SYSTEM + tristate "VPSS System module driver" + depends on ARCH_DAVINCI + help + Support for vpss system module for video driver + +config VIDEO_VPFE_CAPTURE + tristate "VPFE Video Capture Driver" + depends on VIDEO_V4L2 && (ARCH_DAVINCI || ARCH_OMAP3) + select VIDEOBUF_DMA_CONTIG + help + Support for DMx/AMx VPFE based frame grabber. This is the + common V4L2 module for following DMx/AMx SoCs from Texas + Instruments:- DM6446, DM365, DM355 & AM3517/05. + + To compile this driver as a module, choose M here: the + module will be called vpfe-capture. + +config VIDEO_DM6446_CCDC + tristate "DM6446 CCDC HW module" + depends on VIDEO_VPFE_CAPTURE + select VIDEO_VPSS_SYSTEM + default y + help + Enables DaVinci CCD hw module. DaVinci CCDC hw interfaces + with decoder modules such as TVP5146 over BT656 or + sensor module such as MT9T001 over a raw interface. This + module configures the interface and CCDC/ISIF to do + video frame capture from slave decoders. + + To compile this driver as a module, choose M here: the + module will be called vpfe. + +config VIDEO_DM355_CCDC + tristate "DM355 CCDC HW module" + depends on ARCH_DAVINCI_DM355 && VIDEO_VPFE_CAPTURE + select VIDEO_VPSS_SYSTEM + default y + help + Enables DM355 CCD hw module. DM355 CCDC hw interfaces + with decoder modules such as TVP5146 over BT656 or + sensor module such as MT9T001 over a raw interface. This + module configures the interface and CCDC/ISIF to do + video frame capture from a slave decoders + + To compile this driver as a module, choose M here: the + module will be called vpfe. + +config VIDEO_ISIF + tristate "ISIF HW module" + depends on ARCH_DAVINCI_DM365 && VIDEO_VPFE_CAPTURE + select VIDEO_VPSS_SYSTEM + default y + help + Enables ISIF hw module. This is the hardware module for + configuring ISIF in VPFE to capture Raw Bayer RGB data from + a image sensor or YUV data from a YUV source. + + To compile this driver as a module, choose M here: the + module will be called vpfe. diff --git a/drivers/media/video/em28xx/em28xx-cards.c b/drivers/media/video/em28xx/em28xx-cards.c index 3a4fd851451..ffbe544e30f 100644 --- a/drivers/media/video/em28xx/em28xx-cards.c +++ b/drivers/media/video/em28xx/em28xx-cards.c @@ -158,6 +158,22 @@ static struct em28xx_reg_seq evga_indtube_digital[] = { { -1, -1, -1, -1}, }; +/* + * KWorld PlusTV 340U and UB435-Q (ATSC) GPIOs map: + * EM_GPIO_0 - currently unknown + * EM_GPIO_1 - LED disable/enable (1 = off, 0 = on) + * EM_GPIO_2 - currently unknown + * EM_GPIO_3 - currently unknown + * EM_GPIO_4 - TDA18271HD/C1 tuner (1 = active, 0 = in reset) + * EM_GPIO_5 - LGDT3304 ATSC/QAM demod (1 = active, 0 = in reset) + * EM_GPIO_6 - currently unknown + * EM_GPIO_7 - currently unknown + */ +static struct em28xx_reg_seq kworld_a340_digital[] = { + {EM28XX_R08_GPIO, 0x6d, ~EM_GPIO_4, 10}, + { -1, -1, -1, -1}, +}; + /* Pinnacle Hybrid Pro eb1a:2881 */ static struct em28xx_reg_seq pinnacle_hybrid_pro_analog[] = { {EM28XX_R08_GPIO, 0xfd, ~EM_GPIO_4, 10}, @@ -1667,6 +1683,16 @@ struct em28xx_board em28xx_boards[] = { .tuner_gpio = reddo_dvb_c_usb_box, .has_dvb = 1, }, + /* 1b80:a340 - Empia EM2870, NXP TDA18271HD and LG DT3304, sold + * initially as the KWorld PlusTV 340U, then as the UB435-Q. + * Early variants have a TDA18271HD/C1, later ones a TDA18271HD/C2 */ + [EM2870_BOARD_KWORLD_A340] = { + .name = "KWorld PlusTV 340U or UB435-Q (ATSC)", + .tuner_type = TUNER_ABSENT, /* Digital-only TDA18271HD */ + .has_dvb = 1, + .dvb_gpio = kworld_a340_digital, + .tuner_gpio = default_tuner_gpio, + }, }; const unsigned int em28xx_bcount = ARRAY_SIZE(em28xx_boards); @@ -1788,6 +1814,8 @@ struct usb_device_id em28xx_id_table[] = { .driver_info = EM2820_BOARD_IODATA_GVMVP_SZ }, { USB_DEVICE(0xeb1a, 0x50a6), .driver_info = EM2860_BOARD_GADMEI_UTV330 }, + { USB_DEVICE(0x1b80, 0xa340), + .driver_info = EM2870_BOARD_KWORLD_A340 }, { }, }; MODULE_DEVICE_TABLE(usb, em28xx_id_table); diff --git a/drivers/media/video/em28xx/em28xx-dvb.c b/drivers/media/video/em28xx/em28xx-dvb.c index cf1d8c3655f..3ac8d3025fe 100644 --- a/drivers/media/video/em28xx/em28xx-dvb.c +++ b/drivers/media/video/em28xx/em28xx-dvb.c @@ -30,11 +30,13 @@ #include "tuner-simple.h" #include "lgdt330x.h" +#include "lgdt3305.h" #include "zl10353.h" #include "s5h1409.h" #include "mt352.h" #include "mt352_priv.h" /* FIXME */ #include "tda1002x.h" +#include "tda18271.h" MODULE_DESCRIPTION("driver for em28xx based DVB cards"); MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@infradead.org>"); @@ -231,6 +233,18 @@ static struct lgdt330x_config em2880_lgdt3303_dev = { .demod_chip = LGDT3303, }; +static struct lgdt3305_config em2870_lgdt3304_dev = { + .i2c_addr = 0x0e, + .demod_chip = LGDT3304, + .spectral_inversion = 1, + .deny_i2c_rptr = 1, + .mpeg_mode = LGDT3305_MPEG_PARALLEL, + .tpclk_edge = LGDT3305_TPCLK_FALLING_EDGE, + .tpvalid_polarity = LGDT3305_TP_VALID_HIGH, + .vsb_if_khz = 3250, + .qam_if_khz = 4000, +}; + static struct zl10353_config em28xx_zl10353_with_xc3028 = { .demod_address = (0x1e >> 1), .no_tuner = 1, @@ -247,6 +261,17 @@ static struct s5h1409_config em28xx_s5h1409_with_xc3028 = { .mpeg_timing = S5H1409_MPEGTIMING_CONTINOUS_NONINVERTING_CLOCK }; +static struct tda18271_std_map kworld_a340_std_map = { + .atsc_6 = { .if_freq = 3250, .agc_mode = 3, .std = 0, + .if_lvl = 1, .rfagc_top = 0x37, }, + .qam_6 = { .if_freq = 4000, .agc_mode = 3, .std = 1, + .if_lvl = 1, .rfagc_top = 0x37, }, +}; + +static struct tda18271_config kworld_a340_config = { + .std_map = &kworld_a340_std_map, +}; + static struct zl10353_config em28xx_zl10353_xc3028_no_i2c_gate = { .demod_address = (0x1e >> 1), .no_tuner = 1, @@ -572,6 +597,14 @@ static int dvb_init(struct em28xx *dev) } } break; + case EM2870_BOARD_KWORLD_A340: + dvb->frontend = dvb_attach(lgdt3305_attach, + &em2870_lgdt3304_dev, + &dev->i2c_adap); + if (dvb->frontend != NULL) + dvb_attach(tda18271_attach, dvb->frontend, 0x60, + &dev->i2c_adap, &kworld_a340_config); + break; default: em28xx_errdev("/2: The frontend of your DVB/ATSC card" " isn't supported yet\n"); diff --git a/drivers/media/video/em28xx/em28xx-input.c b/drivers/media/video/em28xx/em28xx-input.c index 5c3fd9411b1..6759cd5570d 100644 --- a/drivers/media/video/em28xx/em28xx-input.c +++ b/drivers/media/video/em28xx/em28xx-input.c @@ -65,17 +65,14 @@ struct em28xx_ir_poll_result { struct em28xx_IR { struct em28xx *dev; struct input_dev *input; - struct ir_input_state ir; char name[32]; char phys[32]; /* poll external decoder */ int polling; struct delayed_work work; - unsigned int last_toggle:1; unsigned int full_code:1; unsigned int last_readcount; - unsigned int repeat_interval; int (*get_key)(struct em28xx_IR *, struct em28xx_ir_poll_result *); @@ -291,67 +288,39 @@ static int em2874_polling_getkey(struct em28xx_IR *ir, static void em28xx_ir_handle_key(struct em28xx_IR *ir) { int result; - int do_sendkey = 0; struct em28xx_ir_poll_result poll_result; /* read the registers containing the IR status */ result = ir->get_key(ir, &poll_result); - if (result < 0) { + if (unlikely(result < 0)) { dprintk("ir->get_key() failed %d\n", result); return; } - dprintk("ir->get_key result tb=%02x rc=%02x lr=%02x data=%02x%02x\n", - poll_result.toggle_bit, poll_result.read_count, - ir->last_readcount, poll_result.rc_address, - poll_result.rc_data[0]); - - if (ir->dev->chip_id == CHIP_ID_EM2874) { - /* The em2874 clears the readcount field every time the - register is read. The em2860/2880 datasheet says that it - is supposed to clear the readcount, but it doesn't. So with - the em2874, we are looking for a non-zero read count as - opposed to a readcount that is incrementing */ - ir->last_readcount = 0; - } - - if (poll_result.read_count == 0) { - /* The button has not been pressed since the last read */ - } else if (ir->last_toggle != poll_result.toggle_bit) { - /* A button has been pressed */ - dprintk("button has been pressed\n"); - ir->last_toggle = poll_result.toggle_bit; - ir->repeat_interval = 0; - do_sendkey = 1; - } else if (poll_result.toggle_bit == ir->last_toggle && - poll_result.read_count > 0 && - poll_result.read_count != ir->last_readcount) { - /* The button is still being held down */ - dprintk("button being held down\n"); - - /* Debouncer for first keypress */ - if (ir->repeat_interval++ > 9) { - /* Start repeating after 1 second */ - do_sendkey = 1; - } - } - - if (do_sendkey) { - dprintk("sending keypress\n"); - + if (unlikely(poll_result.read_count != ir->last_readcount)) { + dprintk("%s: toggle: %d, count: %d, key 0x%02x%02x\n", __func__, + poll_result.toggle_bit, poll_result.read_count, + poll_result.rc_address, poll_result.rc_data[0]); if (ir->full_code) - ir_input_keydown(ir->input, &ir->ir, - poll_result.rc_address << 8 | - poll_result.rc_data[0]); + ir_keydown(ir->input, + poll_result.rc_address << 8 | + poll_result.rc_data[0], + poll_result.toggle_bit); else - ir_input_keydown(ir->input, &ir->ir, - poll_result.rc_data[0]); - - ir_input_nokey(ir->input, &ir->ir); + ir_keydown(ir->input, + poll_result.rc_data[0], + poll_result.toggle_bit); + + if (ir->dev->chip_id == CHIP_ID_EM2874) + /* The em2874 clears the readcount field every time the + register is read. The em2860/2880 datasheet says that it + is supposed to clear the readcount, but it doesn't. So with + the em2874, we are looking for a non-zero read count as + opposed to a readcount that is incrementing */ + ir->last_readcount = 0; + else + ir->last_readcount = poll_result.read_count; } - - ir->last_readcount = poll_result.read_count; - return; } static void em28xx_ir_work(struct work_struct *work) @@ -466,11 +435,6 @@ int em28xx_ir_init(struct em28xx *dev) usb_make_path(dev->udev, ir->phys, sizeof(ir->phys)); strlcat(ir->phys, "/input0", sizeof(ir->phys)); - /* Set IR protocol */ - err = ir_input_init(input_dev, &ir->ir, IR_TYPE_OTHER); - if (err < 0) - goto err_out_free; - input_dev->name = ir->name; input_dev->phys = ir->phys; input_dev->id.bustype = BUS_USB; diff --git a/drivers/media/video/em28xx/em28xx-video.c b/drivers/media/video/em28xx/em28xx-video.c index 20090e34173..7b9ec6e493e 100644 --- a/drivers/media/video/em28xx/em28xx-video.c +++ b/drivers/media/video/em28xx/em28xx-video.c @@ -654,12 +654,12 @@ static inline int em28xx_isoc_copy_vbi(struct em28xx *dev, struct urb *urb) } if (buf != NULL && dev->capture_type == 2) { - if (len > 4 && p[0] == 0x88 && p[1] == 0x88 && + if (len >= 4 && p[0] == 0x88 && p[1] == 0x88 && p[2] == 0x88 && p[3] == 0x88) { p += 4; len -= 4; } - if (len > 4 && p[0] == 0x22 && p[1] == 0x5a) { + if (len >= 4 && p[0] == 0x22 && p[1] == 0x5a) { em28xx_isocdbg("Video frame %d, len=%i, %s\n", p[2], len, (p[2] & 1) ? "odd" : "even"); diff --git a/drivers/media/video/em28xx/em28xx.h b/drivers/media/video/em28xx/em28xx.h index b252d1b1b2a..1c61a6b65d2 100644 --- a/drivers/media/video/em28xx/em28xx.h +++ b/drivers/media/video/em28xx/em28xx.h @@ -32,6 +32,7 @@ #include <linux/i2c.h> #include <linux/mutex.h> #include <media/ir-kbd-i2c.h> +#include <media/ir-core.h> #if defined(CONFIG_VIDEO_EM28XX_DVB) || defined(CONFIG_VIDEO_EM28XX_DVB_MODULE) #include <media/videobuf-dvb.h> #endif @@ -113,6 +114,7 @@ #define EM2870_BOARD_REDDO_DVB_C_USB_BOX 73 #define EM2800_BOARD_VC211A 74 #define EM2882_BOARD_DIKOM_DK300 75 +#define EM2870_BOARD_KWORLD_A340 76 /* Limits minimum and default number of buffers */ #define EM28XX_MIN_BUF 4 diff --git a/drivers/media/video/fsl-viu.c b/drivers/media/video/fsl-viu.c new file mode 100644 index 00000000000..8f1c94f7e00 --- /dev/null +++ b/drivers/media/video/fsl-viu.c @@ -0,0 +1,1632 @@ +/* + * Copyright 2008-2010 Freescale Semiconductor, Inc. All Rights Reserved. + * + * Freescale VIU video driver + * + * Authors: Hongjun Chen <hong-jun.chen@freescale.com> + * Porting to 2.6.35 by DENX Software Engineering, + * Anatolij Gustschin <agust@denx.de> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + */ + +#include <linux/module.h> +#include <linux/clk.h> +#include <linux/kernel.h> +#include <linux/i2c.h> +#include <linux/init.h> +#include <linux/interrupt.h> +#include <linux/io.h> +#include <linux/of_platform.h> +#include <linux/version.h> +#include <media/v4l2-common.h> +#include <media/v4l2-device.h> +#include <media/v4l2-ioctl.h> +#include <media/videobuf-dma-contig.h> + +#define DRV_NAME "fsl_viu" +#define VIU_MAJOR_VERSION 0 +#define VIU_MINOR_VERSION 5 +#define VIU_RELEASE 0 +#define VIU_VERSION KERNEL_VERSION(VIU_MAJOR_VERSION, \ + VIU_MINOR_VERSION, \ + VIU_RELEASE) + +#define BUFFER_TIMEOUT msecs_to_jiffies(500) /* 0.5 seconds */ + +#define VIU_VID_MEM_LIMIT 4 /* Video memory limit, in Mb */ + +/* I2C address of video decoder chip is 0x4A */ +#define VIU_VIDEO_DECODER_ADDR 0x25 + +/* supported controls */ +static struct v4l2_queryctrl viu_qctrl[] = { + { + .id = V4L2_CID_BRIGHTNESS, + .type = V4L2_CTRL_TYPE_INTEGER, + .name = "Brightness", + .minimum = 0, + .maximum = 255, + .step = 1, + .default_value = 127, + .flags = 0, + }, { + .id = V4L2_CID_CONTRAST, + .type = V4L2_CTRL_TYPE_INTEGER, + .name = "Contrast", + .minimum = 0, + .maximum = 255, + .step = 0x1, + .default_value = 0x10, + .flags = 0, + }, { + .id = V4L2_CID_SATURATION, + .type = V4L2_CTRL_TYPE_INTEGER, + .name = "Saturation", + .minimum = 0, + .maximum = 255, + .step = 0x1, + .default_value = 127, + .flags = 0, + }, { + .id = V4L2_CID_HUE, + .type = V4L2_CTRL_TYPE_INTEGER, + .name = "Hue", + .minimum = -128, + .maximum = 127, + .step = 0x1, + .default_value = 0, + .flags = 0, + } +}; + +static int qctl_regs[ARRAY_SIZE(viu_qctrl)]; + +static int info_level; + +#define dprintk(level, fmt, arg...) \ + do { \ + if (level <= info_level) \ + printk(KERN_DEBUG "viu: " fmt , ## arg); \ + } while (0) + +/* + * Basic structures + */ +struct viu_fmt { + char name[32]; + u32 fourcc; /* v4l2 format id */ + u32 pixelformat; + int depth; +}; + +static struct viu_fmt formats[] = { + { + .name = "RGB-16 (5/B-6/G-5/R)", + .fourcc = V4L2_PIX_FMT_RGB565, + .pixelformat = V4L2_PIX_FMT_RGB565, + .depth = 16, + }, { + .name = "RGB-32 (A-R-G-B)", + .fourcc = V4L2_PIX_FMT_RGB32, + .pixelformat = V4L2_PIX_FMT_RGB32, + .depth = 32, + } +}; + +struct viu_dev; +struct viu_buf; + +/* buffer for one video frame */ +struct viu_buf { + /* common v4l buffer stuff -- must be first */ + struct videobuf_buffer vb; + struct viu_fmt *fmt; +}; + +struct viu_dmaqueue { + struct viu_dev *dev; + struct list_head active; + struct list_head queued; + struct timer_list timeout; +}; + +struct viu_status { + u32 field_irq; + u32 vsync_irq; + u32 hsync_irq; + u32 vstart_irq; + u32 dma_end_irq; + u32 error_irq; +}; + +struct viu_reg { + u32 status_cfg; + u32 luminance; + u32 chroma_r; + u32 chroma_g; + u32 chroma_b; + u32 field_base_addr; + u32 dma_inc; + u32 picture_count; + u32 req_alarm; + u32 alpha; +} __attribute__ ((packed)); + +struct viu_dev { + struct v4l2_device v4l2_dev; + struct mutex lock; + spinlock_t slock; + int users; + + struct device *dev; + /* various device info */ + struct video_device *vdev; + struct viu_dmaqueue vidq; + enum v4l2_field capfield; + int field; + int first; + int dma_done; + + /* Hardware register area */ + struct viu_reg *vr; + + /* Interrupt vector */ + int irq; + struct viu_status irqs; + + /* video overlay */ + struct v4l2_framebuffer ovbuf; + struct viu_fmt *ovfmt; + unsigned int ovenable; + enum v4l2_field ovfield; + + /* crop */ + struct v4l2_rect crop_current; + + /* clock pointer */ + struct clk *clk; + + /* decoder */ + struct v4l2_subdev *decoder; +}; + +struct viu_fh { + struct viu_dev *dev; + + /* video capture */ + struct videobuf_queue vb_vidq; + spinlock_t vbq_lock; /* spinlock for the videobuf queue */ + + /* video overlay */ + struct v4l2_window win; + struct v4l2_clip clips[1]; + + /* video capture */ + struct viu_fmt *fmt; + int width, height, sizeimage; + enum v4l2_buf_type type; +}; + +static struct viu_reg reg_val; + +/* + * Macro definitions of VIU registers + */ + +/* STATUS_CONFIG register */ +enum status_config { + SOFT_RST = 1 << 0, + + ERR_MASK = 0x0f << 4, /* Error code mask */ + ERR_NO = 0x00, /* No error */ + ERR_DMA_V = 0x01 << 4, /* DMA in vertical active */ + ERR_DMA_VB = 0x02 << 4, /* DMA in vertical blanking */ + ERR_LINE_TOO_LONG = 0x04 << 4, /* Line too long */ + ERR_TOO_MANG_LINES = 0x05 << 4, /* Too many lines in field */ + ERR_LINE_TOO_SHORT = 0x06 << 4, /* Line too short */ + ERR_NOT_ENOUGH_LINE = 0x07 << 4, /* Not enough lines in field */ + ERR_FIFO_OVERFLOW = 0x08 << 4, /* FIFO overflow */ + ERR_FIFO_UNDERFLOW = 0x09 << 4, /* FIFO underflow */ + ERR_1bit_ECC = 0x0a << 4, /* One bit ECC error */ + ERR_MORE_ECC = 0x0b << 4, /* Two/more bits ECC error */ + + INT_FIELD_EN = 0x01 << 8, /* Enable field interrupt */ + INT_VSYNC_EN = 0x01 << 9, /* Enable vsync interrupt */ + INT_HSYNC_EN = 0x01 << 10, /* Enable hsync interrupt */ + INT_VSTART_EN = 0x01 << 11, /* Enable vstart interrupt */ + INT_DMA_END_EN = 0x01 << 12, /* Enable DMA end interrupt */ + INT_ERROR_EN = 0x01 << 13, /* Enable error interrupt */ + INT_ECC_EN = 0x01 << 14, /* Enable ECC interrupt */ + + INT_FIELD_STATUS = 0x01 << 16, /* field interrupt status */ + INT_VSYNC_STATUS = 0x01 << 17, /* vsync interrupt status */ + INT_HSYNC_STATUS = 0x01 << 18, /* hsync interrupt status */ + INT_VSTART_STATUS = 0x01 << 19, /* vstart interrupt status */ + INT_DMA_END_STATUS = 0x01 << 20, /* DMA end interrupt status */ + INT_ERROR_STATUS = 0x01 << 21, /* error interrupt status */ + + DMA_ACT = 0x01 << 27, /* Enable DMA transfer */ + FIELD_NO = 0x01 << 28, /* Field number */ + DITHER_ON = 0x01 << 29, /* Dithering is on */ + ROUND_ON = 0x01 << 30, /* Round is on */ + MODE_32BIT = 0x01 << 31, /* Data in RGBa888, + * 0 in RGB565 + */ +}; + +#define norm_maxw() 720 +#define norm_maxh() 576 + +#define INT_ALL_STATUS (INT_FIELD_STATUS | INT_VSYNC_STATUS | \ + INT_HSYNC_STATUS | INT_VSTART_STATUS | \ + INT_DMA_END_STATUS | INT_ERROR_STATUS) + +#define NUM_FORMATS ARRAY_SIZE(formats) + +static irqreturn_t viu_intr(int irq, void *dev_id); + +struct viu_fmt *format_by_fourcc(int fourcc) +{ + int i; + + for (i = 0; i < NUM_FORMATS; i++) { + if (formats[i].pixelformat == fourcc) + return formats + i; + } + + dprintk(0, "unknown pixelformat:'%4.4s'\n", (char *)&fourcc); + return NULL; +} + +void viu_start_dma(struct viu_dev *dev) +{ + struct viu_reg *vr = dev->vr; + + dev->field = 0; + + /* Enable DMA operation */ + out_be32(&vr->status_cfg, SOFT_RST); + out_be32(&vr->status_cfg, INT_FIELD_EN); +} + +void viu_stop_dma(struct viu_dev *dev) +{ + struct viu_reg *vr = dev->vr; + int cnt = 100; + u32 status_cfg; + + out_be32(&vr->status_cfg, 0); + + /* Clear pending interrupts */ + status_cfg = in_be32(&vr->status_cfg); + if (status_cfg & 0x3f0000) + out_be32(&vr->status_cfg, status_cfg & 0x3f0000); + + if (status_cfg & DMA_ACT) { + do { + status_cfg = in_be32(&vr->status_cfg); + if (status_cfg & INT_DMA_END_STATUS) + break; + } while (cnt--); + + if (cnt < 0) { + /* timed out, issue soft reset */ + out_be32(&vr->status_cfg, SOFT_RST); + out_be32(&vr->status_cfg, 0); + } else { + /* clear DMA_END and other pending irqs */ + out_be32(&vr->status_cfg, status_cfg & 0x3f0000); + } + } + + dev->field = 0; +} + +static int restart_video_queue(struct viu_dmaqueue *vidq) +{ + struct viu_buf *buf, *prev; + + dprintk(1, "%s vidq=0x%08lx\n", __func__, (unsigned long)vidq); + if (!list_empty(&vidq->active)) { + buf = list_entry(vidq->active.next, struct viu_buf, vb.queue); + dprintk(2, "restart_queue [%p/%d]: restart dma\n", + buf, buf->vb.i); + + viu_stop_dma(vidq->dev); + + /* cancel all outstanding capture requests */ + list_for_each_entry_safe(buf, prev, &vidq->active, vb.queue) { + list_del(&buf->vb.queue); + buf->vb.state = VIDEOBUF_ERROR; + wake_up(&buf->vb.done); + } + mod_timer(&vidq->timeout, jiffies+BUFFER_TIMEOUT); + return 0; + } + + prev = NULL; + for (;;) { + if (list_empty(&vidq->queued)) + return 0; + buf = list_entry(vidq->queued.next, struct viu_buf, vb.queue); + if (prev == NULL) { + list_del(&buf->vb.queue); + list_add_tail(&buf->vb.queue, &vidq->active); + + dprintk(1, "Restarting video dma\n"); + viu_stop_dma(vidq->dev); + viu_start_dma(vidq->dev); + + buf->vb.state = VIDEOBUF_ACTIVE; + mod_timer(&vidq->timeout, jiffies+BUFFER_TIMEOUT); + dprintk(2, "[%p/%d] restart_queue - first active\n", + buf, buf->vb.i); + + } else if (prev->vb.width == buf->vb.width && + prev->vb.height == buf->vb.height && + prev->fmt == buf->fmt) { + list_del(&buf->vb.queue); + list_add_tail(&buf->vb.queue, &vidq->active); + buf->vb.state = VIDEOBUF_ACTIVE; + dprintk(2, "[%p/%d] restart_queue - move to active\n", + buf, buf->vb.i); + } else { + return 0; + } + prev = buf; + } +} + +static void viu_vid_timeout(unsigned long data) +{ + struct viu_dev *dev = (struct viu_dev *)data; + struct viu_buf *buf; + struct viu_dmaqueue *vidq = &dev->vidq; + + while (!list_empty(&vidq->active)) { + buf = list_entry(vidq->active.next, struct viu_buf, vb.queue); + list_del(&buf->vb.queue); + buf->vb.state = VIDEOBUF_ERROR; + wake_up(&buf->vb.done); + dprintk(1, "viu/0: [%p/%d] timeout\n", buf, buf->vb.i); + } + + restart_video_queue(vidq); +} + +/* + * Videobuf operations + */ +static int buffer_setup(struct videobuf_queue *vq, unsigned int *count, + unsigned int *size) +{ + struct viu_fh *fh = vq->priv_data; + + *size = fh->width * fh->height * fh->fmt->depth >> 3; + if (*count == 0) + *count = 32; + + while (*size * *count > VIU_VID_MEM_LIMIT * 1024 * 1024) + (*count)--; + + dprintk(1, "%s, count=%d, size=%d\n", __func__, *count, *size); + return 0; +} + +static void free_buffer(struct videobuf_queue *vq, struct viu_buf *buf) +{ + struct videobuf_buffer *vb = &buf->vb; + void *vaddr = NULL; + + BUG_ON(in_interrupt()); + + videobuf_waiton(&buf->vb, 0, 0); + + if (vq->int_ops && vq->int_ops->vaddr) + vaddr = vq->int_ops->vaddr(vb); + + if (vaddr) + videobuf_dma_contig_free(vq, &buf->vb); + + buf->vb.state = VIDEOBUF_NEEDS_INIT; +} + +inline int buffer_activate(struct viu_dev *dev, struct viu_buf *buf) +{ + struct viu_reg *vr = dev->vr; + int bpp; + + /* setup the DMA base address */ + reg_val.field_base_addr = videobuf_to_dma_contig(&buf->vb); + + dprintk(1, "buffer_activate [%p/%d]: dma addr 0x%lx\n", + buf, buf->vb.i, (unsigned long)reg_val.field_base_addr); + + /* interlace is on by default, set horizontal DMA increment */ + reg_val.status_cfg = 0; + bpp = buf->fmt->depth >> 3; + switch (bpp) { + case 2: + reg_val.status_cfg &= ~MODE_32BIT; + reg_val.dma_inc = buf->vb.width * 2; + break; + case 4: + reg_val.status_cfg |= MODE_32BIT; + reg_val.dma_inc = buf->vb.width * 4; + break; + default: + dprintk(0, "doesn't support color depth(%d)\n", + bpp * 8); + return -EINVAL; + } + + /* setup picture_count register */ + reg_val.picture_count = (buf->vb.height / 2) << 16 | + buf->vb.width; + + reg_val.status_cfg |= DMA_ACT | INT_DMA_END_EN | INT_FIELD_EN; + + buf->vb.state = VIDEOBUF_ACTIVE; + dev->capfield = buf->vb.field; + + /* reset dma increment if needed */ + if (!V4L2_FIELD_HAS_BOTH(buf->vb.field)) + reg_val.dma_inc = 0; + + out_be32(&vr->dma_inc, reg_val.dma_inc); + out_be32(&vr->picture_count, reg_val.picture_count); + out_be32(&vr->field_base_addr, reg_val.field_base_addr); + mod_timer(&dev->vidq.timeout, jiffies + BUFFER_TIMEOUT); + return 0; +} + +static int buffer_prepare(struct videobuf_queue *vq, + struct videobuf_buffer *vb, + enum v4l2_field field) +{ + struct viu_fh *fh = vq->priv_data; + struct viu_buf *buf = container_of(vb, struct viu_buf, vb); + int rc; + + BUG_ON(fh->fmt == NULL); + + if (fh->width < 48 || fh->width > norm_maxw() || + fh->height < 32 || fh->height > norm_maxh()) + return -EINVAL; + buf->vb.size = (fh->width * fh->height * fh->fmt->depth) >> 3; + if (buf->vb.baddr != 0 && buf->vb.bsize < buf->vb.size) + return -EINVAL; + + if (buf->fmt != fh->fmt || + buf->vb.width != fh->width || + buf->vb.height != fh->height || + buf->vb.field != field) { + buf->fmt = fh->fmt; + buf->vb.width = fh->width; + buf->vb.height = fh->height; + buf->vb.field = field; + } + + if (buf->vb.state == VIDEOBUF_NEEDS_INIT) { + rc = videobuf_iolock(vq, &buf->vb, NULL); + if (rc != 0) + goto fail; + + buf->vb.width = fh->width; + buf->vb.height = fh->height; + buf->vb.field = field; + buf->fmt = fh->fmt; + } + + buf->vb.state = VIDEOBUF_PREPARED; + return 0; + +fail: + free_buffer(vq, buf); + return rc; +} + +static void buffer_queue(struct videobuf_queue *vq, struct videobuf_buffer *vb) +{ + struct viu_buf *buf = container_of(vb, struct viu_buf, vb); + struct viu_fh *fh = vq->priv_data; + struct viu_dev *dev = fh->dev; + struct viu_dmaqueue *vidq = &dev->vidq; + struct viu_buf *prev; + + if (!list_empty(&vidq->queued)) { + dprintk(1, "adding vb queue=0x%08lx\n", + (unsigned long)&buf->vb.queue); + dprintk(1, "vidq pointer 0x%p, queued 0x%p\n", + vidq, &vidq->queued); + dprintk(1, "dev %p, queued: self %p, next %p, head %p\n", + dev, &vidq->queued, vidq->queued.next, + vidq->queued.prev); + list_add_tail(&buf->vb.queue, &vidq->queued); + buf->vb.state = VIDEOBUF_QUEUED; + dprintk(2, "[%p/%d] buffer_queue - append to queued\n", + buf, buf->vb.i); + } else if (list_empty(&vidq->active)) { + dprintk(1, "adding vb active=0x%08lx\n", + (unsigned long)&buf->vb.queue); + list_add_tail(&buf->vb.queue, &vidq->active); + buf->vb.state = VIDEOBUF_ACTIVE; + mod_timer(&vidq->timeout, jiffies+BUFFER_TIMEOUT); + dprintk(2, "[%p/%d] buffer_queue - first active\n", + buf, buf->vb.i); + + buffer_activate(dev, buf); + } else { + dprintk(1, "adding vb queue2=0x%08lx\n", + (unsigned long)&buf->vb.queue); + prev = list_entry(vidq->active.prev, struct viu_buf, vb.queue); + if (prev->vb.width == buf->vb.width && + prev->vb.height == buf->vb.height && + prev->fmt == buf->fmt) { + list_add_tail(&buf->vb.queue, &vidq->active); + buf->vb.state = VIDEOBUF_ACTIVE; + dprintk(2, "[%p/%d] buffer_queue - append to active\n", + buf, buf->vb.i); + } else { + list_add_tail(&buf->vb.queue, &vidq->queued); + buf->vb.state = VIDEOBUF_QUEUED; + dprintk(2, "[%p/%d] buffer_queue - first queued\n", + buf, buf->vb.i); + } + } +} + +static void buffer_release(struct videobuf_queue *vq, + struct videobuf_buffer *vb) +{ + struct viu_buf *buf = container_of(vb, struct viu_buf, vb); + struct viu_fh *fh = vq->priv_data; + struct viu_dev *dev = (struct viu_dev *)fh->dev; + + viu_stop_dma(dev); + free_buffer(vq, buf); +} + +static struct videobuf_queue_ops viu_video_qops = { + .buf_setup = buffer_setup, + .buf_prepare = buffer_prepare, + .buf_queue = buffer_queue, + .buf_release = buffer_release, +}; + +/* + * IOCTL vidioc handling + */ +static int vidioc_querycap(struct file *file, void *priv, + struct v4l2_capability *cap) +{ + strcpy(cap->driver, "viu"); + strcpy(cap->card, "viu"); + cap->version = VIU_VERSION; + cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | + V4L2_CAP_STREAMING | + V4L2_CAP_VIDEO_OVERLAY | + V4L2_CAP_READWRITE; + return 0; +} + +static int vidioc_enum_fmt(struct file *file, void *priv, + struct v4l2_fmtdesc *f) +{ + int index = f->index; + + if (f->index > NUM_FORMATS) + return -EINVAL; + + strlcpy(f->description, formats[index].name, sizeof(f->description)); + f->pixelformat = formats[index].fourcc; + return 0; +} + +static int vidioc_g_fmt_cap(struct file *file, void *priv, + struct v4l2_format *f) +{ + struct viu_fh *fh = priv; + + f->fmt.pix.width = fh->width; + f->fmt.pix.height = fh->height; + f->fmt.pix.field = fh->vb_vidq.field; + f->fmt.pix.pixelformat = fh->fmt->pixelformat; + f->fmt.pix.bytesperline = + (f->fmt.pix.width * fh->fmt->depth) >> 3; + f->fmt.pix.sizeimage = fh->sizeimage; + return 0; +} + +static int vidioc_try_fmt_cap(struct file *file, void *priv, + struct v4l2_format *f) +{ + struct viu_fmt *fmt; + enum v4l2_field field; + unsigned int maxw, maxh; + + fmt = format_by_fourcc(f->fmt.pix.pixelformat); + if (!fmt) { + dprintk(1, "Fourcc format (0x%08x) invalid.", + f->fmt.pix.pixelformat); + return -EINVAL; + } + + field = f->fmt.pix.field; + + if (field == V4L2_FIELD_ANY) { + field = V4L2_FIELD_INTERLACED; + } else if (field != V4L2_FIELD_INTERLACED) { + dprintk(1, "Field type invalid.\n"); + return -EINVAL; + } + + maxw = norm_maxw(); + maxh = norm_maxh(); + + f->fmt.pix.field = field; + if (f->fmt.pix.height < 32) + f->fmt.pix.height = 32; + if (f->fmt.pix.height > maxh) + f->fmt.pix.height = maxh; + if (f->fmt.pix.width < 48) + f->fmt.pix.width = 48; + if (f->fmt.pix.width > maxw) + f->fmt.pix.width = maxw; + f->fmt.pix.width &= ~0x03; + f->fmt.pix.bytesperline = + (f->fmt.pix.width * fmt->depth) >> 3; + + return 0; +} + +static int vidioc_s_fmt_cap(struct file *file, void *priv, + struct v4l2_format *f) +{ + struct viu_fh *fh = priv; + int ret; + + ret = vidioc_try_fmt_cap(file, fh, f); + if (ret < 0) + return ret; + + fh->fmt = format_by_fourcc(f->fmt.pix.pixelformat); + fh->width = f->fmt.pix.width; + fh->height = f->fmt.pix.height; + fh->sizeimage = f->fmt.pix.sizeimage; + fh->vb_vidq.field = f->fmt.pix.field; + fh->type = f->type; + dprintk(1, "set to pixelformat '%4.6s'\n", (char *)&fh->fmt->name); + return 0; +} + +static int vidioc_g_fmt_overlay(struct file *file, void *priv, + struct v4l2_format *f) +{ + struct viu_fh *fh = priv; + + f->fmt.win = fh->win; + return 0; +} + +static int verify_preview(struct viu_dev *dev, struct v4l2_window *win) +{ + enum v4l2_field field; + int maxw, maxh; + + if (dev->ovbuf.base == NULL) + return -EINVAL; + if (dev->ovfmt == NULL) + return -EINVAL; + if (win->w.width < 48 || win->w.height < 32) + return -EINVAL; + + field = win->field; + maxw = dev->crop_current.width; + maxh = dev->crop_current.height; + + if (field == V4L2_FIELD_ANY) { + field = (win->w.height > maxh/2) + ? V4L2_FIELD_INTERLACED + : V4L2_FIELD_TOP; + } + switch (field) { + case V4L2_FIELD_TOP: + case V4L2_FIELD_BOTTOM: + maxh = maxh / 2; + break; + case V4L2_FIELD_INTERLACED: + break; + default: + return -EINVAL; + } + + win->field = field; + if (win->w.width > maxw) + win->w.width = maxw; + if (win->w.height > maxh) + win->w.height = maxh; + return 0; +} + +inline void viu_activate_overlay(struct viu_reg *viu_reg) +{ + struct viu_reg *vr = viu_reg; + + out_be32(&vr->field_base_addr, reg_val.field_base_addr); + out_be32(&vr->dma_inc, reg_val.dma_inc); + out_be32(&vr->picture_count, reg_val.picture_count); +} + +static int viu_start_preview(struct viu_dev *dev, struct viu_fh *fh) +{ + int bpp; + + dprintk(1, "%s %dx%d %s\n", __func__, + fh->win.w.width, fh->win.w.height, dev->ovfmt->name); + + reg_val.status_cfg = 0; + + /* setup window */ + reg_val.picture_count = (fh->win.w.height / 2) << 16 | + fh->win.w.width; + + /* setup color depth and dma increment */ + bpp = dev->ovfmt->depth / 8; + switch (bpp) { + case 2: + reg_val.status_cfg &= ~MODE_32BIT; + reg_val.dma_inc = fh->win.w.width * 2; + break; + case 4: + reg_val.status_cfg |= MODE_32BIT; + reg_val.dma_inc = fh->win.w.width * 4; + break; + default: + dprintk(0, "device doesn't support color depth(%d)\n", + bpp * 8); + return -EINVAL; + } + + dev->ovfield = fh->win.field; + if (!V4L2_FIELD_HAS_BOTH(dev->ovfield)) + reg_val.dma_inc = 0; + + reg_val.status_cfg |= DMA_ACT | INT_DMA_END_EN | INT_FIELD_EN; + + /* setup the base address of the overlay buffer */ + reg_val.field_base_addr = (u32)dev->ovbuf.base; + + dev->ovenable = 1; + viu_activate_overlay(dev->vr); + + /* start dma */ + viu_start_dma(dev); + return 0; +} + +static int vidioc_s_fmt_overlay(struct file *file, void *priv, + struct v4l2_format *f) +{ + struct viu_fh *fh = priv; + struct viu_dev *dev = (struct viu_dev *)fh->dev; + unsigned long flags; + int err; + + err = verify_preview(dev, &f->fmt.win); + if (err) + return err; + + mutex_lock(&dev->lock); + fh->win = f->fmt.win; + + spin_lock_irqsave(&dev->slock, flags); + viu_start_preview(dev, fh); + spin_unlock_irqrestore(&dev->slock, flags); + mutex_unlock(&dev->lock); + return 0; +} + +static int vidioc_try_fmt_overlay(struct file *file, void *priv, + struct v4l2_format *f) +{ + return 0; +} + +int vidioc_g_fbuf(struct file *file, void *priv, struct v4l2_framebuffer *arg) +{ + struct viu_fh *fh = priv; + struct viu_dev *dev = fh->dev; + struct v4l2_framebuffer *fb = arg; + + *fb = dev->ovbuf; + fb->capability = V4L2_FBUF_CAP_LIST_CLIPPING; + return 0; +} + +int vidioc_s_fbuf(struct file *file, void *priv, struct v4l2_framebuffer *arg) +{ + struct viu_fh *fh = priv; + struct viu_dev *dev = fh->dev; + struct v4l2_framebuffer *fb = arg; + struct viu_fmt *fmt; + + if (!capable(CAP_SYS_ADMIN) && !capable(CAP_SYS_RAWIO)) + return -EPERM; + + /* check args */ + fmt = format_by_fourcc(fb->fmt.pixelformat); + if (fmt == NULL) + return -EINVAL; + + /* ok, accept it */ + dev->ovbuf = *fb; + dev->ovfmt = fmt; + if (dev->ovbuf.fmt.bytesperline == 0) { + dev->ovbuf.fmt.bytesperline = + dev->ovbuf.fmt.width * fmt->depth / 8; + } + return 0; +} + +static int vidioc_reqbufs(struct file *file, void *priv, + struct v4l2_requestbuffers *p) +{ + struct viu_fh *fh = priv; + + return videobuf_reqbufs(&fh->vb_vidq, p); +} + +static int vidioc_querybuf(struct file *file, void *priv, + struct v4l2_buffer *p) +{ + struct viu_fh *fh = priv; + + return videobuf_querybuf(&fh->vb_vidq, p); +} + +static int vidioc_qbuf(struct file *file, void *priv, struct v4l2_buffer *p) +{ + struct viu_fh *fh = priv; + + return videobuf_qbuf(&fh->vb_vidq, p); +} + +static int vidioc_dqbuf(struct file *file, void *priv, struct v4l2_buffer *p) +{ + struct viu_fh *fh = priv; + + return videobuf_dqbuf(&fh->vb_vidq, p, + file->f_flags & O_NONBLOCK); +} + +static int vidioc_streamon(struct file *file, void *priv, enum v4l2_buf_type i) +{ + struct viu_fh *fh = priv; + + if (fh->type != V4L2_BUF_TYPE_VIDEO_CAPTURE) + return -EINVAL; + if (fh->type != i) + return -EINVAL; + + return videobuf_streamon(&fh->vb_vidq); +} + +static int vidioc_streamoff(struct file *file, void *priv, enum v4l2_buf_type i) +{ + struct viu_fh *fh = priv; + + if (fh->type != V4L2_BUF_TYPE_VIDEO_CAPTURE) + return -EINVAL; + if (fh->type != i) + return -EINVAL; + + return videobuf_streamoff(&fh->vb_vidq); +} + +#define decoder_call(viu, o, f, args...) \ + v4l2_subdev_call(viu->decoder, o, f, ##args) + +static int vidioc_s_std(struct file *file, void *priv, v4l2_std_id *id) +{ + struct viu_fh *fh = priv; + + decoder_call(fh->dev, core, s_std, *id); + return 0; +} + +/* only one input in this driver */ +static int vidioc_enum_input(struct file *file, void *priv, + struct v4l2_input *inp) +{ + struct viu_fh *fh = priv; + + if (inp->index != 0) + return -EINVAL; + + inp->type = V4L2_INPUT_TYPE_CAMERA; + inp->std = fh->dev->vdev->tvnorms; + strcpy(inp->name, "Camera"); + return 0; +} + +static int vidioc_g_input(struct file *file, void *priv, unsigned int *i) +{ + *i = 0; + return 0; +} + +static int vidioc_s_input(struct file *file, void *priv, unsigned int i) +{ + struct viu_fh *fh = priv; + + if (i > 1) + return -EINVAL; + + decoder_call(fh->dev, video, s_routing, i, 0, 0); + return 0; +} + +/* Controls */ +static int vidioc_queryctrl(struct file *file, void *priv, + struct v4l2_queryctrl *qc) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(viu_qctrl); i++) { + if (qc->id && qc->id == viu_qctrl[i].id) { + memcpy(qc, &(viu_qctrl[i]), sizeof(*qc)); + return 0; + } + } + return -EINVAL; +} + +static int vidioc_g_ctrl(struct file *file, void *priv, + struct v4l2_control *ctrl) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(viu_qctrl); i++) { + if (ctrl->id == viu_qctrl[i].id) { + ctrl->value = qctl_regs[i]; + return 0; + } + } + return -EINVAL; +} +static int vidioc_s_ctrl(struct file *file, void *priv, + struct v4l2_control *ctrl) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(viu_qctrl); i++) { + if (ctrl->id == viu_qctrl[i].id) { + if (ctrl->value < viu_qctrl[i].minimum + || ctrl->value > viu_qctrl[i].maximum) + return -ERANGE; + qctl_regs[i] = ctrl->value; + return 0; + } + } + return -EINVAL; +} + +inline void viu_activate_next_buf(struct viu_dev *dev, + struct viu_dmaqueue *viuq) +{ + struct viu_dmaqueue *vidq = viuq; + struct viu_buf *buf; + + /* launch another DMA operation for an active/queued buffer */ + if (!list_empty(&vidq->active)) { + buf = list_entry(vidq->active.next, struct viu_buf, + vb.queue); + dprintk(1, "start another queued buffer: 0x%p\n", buf); + buffer_activate(dev, buf); + } else if (!list_empty(&vidq->queued)) { + buf = list_entry(vidq->queued.next, struct viu_buf, + vb.queue); + list_del(&buf->vb.queue); + + dprintk(1, "start another queued buffer: 0x%p\n", buf); + list_add_tail(&buf->vb.queue, &vidq->active); + buf->vb.state = VIDEOBUF_ACTIVE; + buffer_activate(dev, buf); + } +} + +inline void viu_default_settings(struct viu_reg *viu_reg) +{ + struct viu_reg *vr = viu_reg; + + out_be32(&vr->luminance, 0x9512A254); + out_be32(&vr->chroma_r, 0x03310000); + out_be32(&vr->chroma_g, 0x06600F38); + out_be32(&vr->chroma_b, 0x00000409); + out_be32(&vr->alpha, 0x000000ff); + out_be32(&vr->req_alarm, 0x00000090); + dprintk(1, "status reg: 0x%08x, field base: 0x%08x\n", + in_be32(&vr->status_cfg), in_be32(&vr->field_base_addr)); +} + +static void viu_overlay_intr(struct viu_dev *dev, u32 status) +{ + struct viu_reg *vr = dev->vr; + + if (status & INT_DMA_END_STATUS) + dev->dma_done = 1; + + if (status & INT_FIELD_STATUS) { + if (dev->dma_done) { + u32 addr = reg_val.field_base_addr; + + dev->dma_done = 0; + if (status & FIELD_NO) + addr += reg_val.dma_inc; + + out_be32(&vr->field_base_addr, addr); + out_be32(&vr->dma_inc, reg_val.dma_inc); + out_be32(&vr->status_cfg, + (status & 0xffc0ffff) | + (status & INT_ALL_STATUS) | + reg_val.status_cfg); + } else if (status & INT_VSYNC_STATUS) { + out_be32(&vr->status_cfg, + (status & 0xffc0ffff) | + (status & INT_ALL_STATUS) | + reg_val.status_cfg); + } + } +} + +static void viu_capture_intr(struct viu_dev *dev, u32 status) +{ + struct viu_dmaqueue *vidq = &dev->vidq; + struct viu_reg *vr = dev->vr; + struct viu_buf *buf; + int field_num; + int need_two; + int dma_done = 0; + + field_num = status & FIELD_NO; + need_two = V4L2_FIELD_HAS_BOTH(dev->capfield); + + if (status & INT_DMA_END_STATUS) { + dma_done = 1; + if (((field_num == 0) && (dev->field == 0)) || + (field_num && (dev->field == 1))) + dev->field++; + } + + if (status & INT_FIELD_STATUS) { + dprintk(1, "irq: field %d, done %d\n", + !!field_num, dma_done); + if (unlikely(dev->first)) { + if (field_num == 0) { + dev->first = 0; + dprintk(1, "activate first buf\n"); + viu_activate_next_buf(dev, vidq); + } else + dprintk(1, "wait field 0\n"); + return; + } + + /* setup buffer address for next dma operation */ + if (!list_empty(&vidq->active)) { + u32 addr = reg_val.field_base_addr; + + if (field_num && need_two) { + addr += reg_val.dma_inc; + dprintk(1, "field 1, 0x%lx, dev field %d\n", + (unsigned long)addr, dev->field); + } + out_be32(&vr->field_base_addr, addr); + out_be32(&vr->dma_inc, reg_val.dma_inc); + out_be32(&vr->status_cfg, + (status & 0xffc0ffff) | + (status & INT_ALL_STATUS) | + reg_val.status_cfg); + return; + } + } + + if (dma_done && field_num && (dev->field == 2)) { + dev->field = 0; + buf = list_entry(vidq->active.next, + struct viu_buf, vb.queue); + dprintk(1, "viu/0: [%p/%d] 0x%lx/0x%lx: dma complete\n", + buf, buf->vb.i, + (unsigned long)videobuf_to_dma_contig(&buf->vb), + (unsigned long)in_be32(&vr->field_base_addr)); + + if (waitqueue_active(&buf->vb.done)) { + list_del(&buf->vb.queue); + do_gettimeofday(&buf->vb.ts); + buf->vb.state = VIDEOBUF_DONE; + buf->vb.field_count++; + wake_up(&buf->vb.done); + } + /* activate next dma buffer */ + viu_activate_next_buf(dev, vidq); + } +} + +static irqreturn_t viu_intr(int irq, void *dev_id) +{ + struct viu_dev *dev = (struct viu_dev *)dev_id; + struct viu_reg *vr = dev->vr; + u32 status; + u32 error; + + status = in_be32(&vr->status_cfg); + + if (status & INT_ERROR_STATUS) { + dev->irqs.error_irq++; + error = status & ERR_MASK; + if (error) + dprintk(1, "Err: error(%d), times:%d!\n", + error >> 4, dev->irqs.error_irq); + /* Clear interrupt error bit and error flags */ + out_be32(&vr->status_cfg, + (status & 0xffc0ffff) | INT_ERROR_STATUS); + } + + if (status & INT_DMA_END_STATUS) { + dev->irqs.dma_end_irq++; + dev->dma_done = 1; + dprintk(2, "VIU DMA end interrupt times: %d\n", + dev->irqs.dma_end_irq); + } + + if (status & INT_HSYNC_STATUS) + dev->irqs.hsync_irq++; + + if (status & INT_FIELD_STATUS) { + dev->irqs.field_irq++; + dprintk(2, "VIU field interrupt times: %d\n", + dev->irqs.field_irq); + } + + if (status & INT_VSTART_STATUS) + dev->irqs.vstart_irq++; + + if (status & INT_VSYNC_STATUS) { + dev->irqs.vsync_irq++; + dprintk(2, "VIU vsync interrupt times: %d\n", + dev->irqs.vsync_irq); + } + + /* clear all pending irqs */ + status = in_be32(&vr->status_cfg); + out_be32(&vr->status_cfg, + (status & 0xffc0ffff) | (status & INT_ALL_STATUS)); + + if (dev->ovenable) { + viu_overlay_intr(dev, status); + return IRQ_HANDLED; + } + + /* Capture mode */ + viu_capture_intr(dev, status); + return IRQ_HANDLED; +} + +/* + * File operations for the device + */ +static int viu_open(struct file *file) +{ + struct video_device *vdev = video_devdata(file); + struct viu_dev *dev = video_get_drvdata(vdev); + struct viu_fh *fh; + struct viu_reg *vr; + int minor = vdev->minor; + u32 status_cfg; + int i; + + dprintk(1, "viu: open (minor=%d)\n", minor); + + dev->users++; + if (dev->users > 1) { + dev->users--; + return -EBUSY; + } + + vr = dev->vr; + + dprintk(1, "open minor=%d type=%s users=%d\n", minor, + v4l2_type_names[V4L2_BUF_TYPE_VIDEO_CAPTURE], dev->users); + + /* allocate and initialize per filehandle data */ + fh = kzalloc(sizeof(*fh), GFP_KERNEL); + if (!fh) { + dev->users--; + return -ENOMEM; + } + + file->private_data = fh; + fh->dev = dev; + + fh->type = V4L2_BUF_TYPE_VIDEO_CAPTURE; + fh->fmt = format_by_fourcc(V4L2_PIX_FMT_RGB32); + fh->width = norm_maxw(); + fh->height = norm_maxh(); + dev->crop_current.width = fh->width; + dev->crop_current.height = fh->height; + + /* Put all controls at a sane state */ + for (i = 0; i < ARRAY_SIZE(viu_qctrl); i++) + qctl_regs[i] = viu_qctrl[i].default_value; + + dprintk(1, "Open: fh=0x%08lx, dev=0x%08lx, dev->vidq=0x%08lx\n", + (unsigned long)fh, (unsigned long)dev, + (unsigned long)&dev->vidq); + dprintk(1, "Open: list_empty queued=%d\n", + list_empty(&dev->vidq.queued)); + dprintk(1, "Open: list_empty active=%d\n", + list_empty(&dev->vidq.active)); + + viu_default_settings(vr); + + status_cfg = in_be32(&vr->status_cfg); + out_be32(&vr->status_cfg, + status_cfg & ~(INT_VSYNC_EN | INT_HSYNC_EN | + INT_FIELD_EN | INT_VSTART_EN | + INT_DMA_END_EN | INT_ERROR_EN | INT_ECC_EN)); + + status_cfg = in_be32(&vr->status_cfg); + out_be32(&vr->status_cfg, status_cfg | INT_ALL_STATUS); + + spin_lock_init(&fh->vbq_lock); + videobuf_queue_dma_contig_init(&fh->vb_vidq, &viu_video_qops, + dev->dev, &fh->vbq_lock, + fh->type, V4L2_FIELD_INTERLACED, + sizeof(struct viu_buf), fh); + return 0; +} + +static ssize_t viu_read(struct file *file, char __user *data, size_t count, + loff_t *ppos) +{ + struct viu_fh *fh = file->private_data; + struct viu_dev *dev = fh->dev; + int ret = 0; + + dprintk(2, "%s\n", __func__); + if (dev->ovenable) + dev->ovenable = 0; + + if (fh->type == V4L2_BUF_TYPE_VIDEO_CAPTURE) { + viu_start_dma(dev); + ret = videobuf_read_stream(&fh->vb_vidq, data, count, + ppos, 0, file->f_flags & O_NONBLOCK); + return ret; + } + return 0; +} + +static unsigned int viu_poll(struct file *file, struct poll_table_struct *wait) +{ + struct viu_fh *fh = file->private_data; + struct videobuf_queue *q = &fh->vb_vidq; + + if (V4L2_BUF_TYPE_VIDEO_CAPTURE != fh->type) + return POLLERR; + + return videobuf_poll_stream(file, q, wait); +} + +static int viu_release(struct file *file) +{ + struct viu_fh *fh = file->private_data; + struct viu_dev *dev = fh->dev; + int minor = video_devdata(file)->minor; + + viu_stop_dma(dev); + videobuf_stop(&fh->vb_vidq); + + kfree(fh); + + dev->users--; + dprintk(1, "close (minor=%d, users=%d)\n", + minor, dev->users); + return 0; +} + +void viu_reset(struct viu_reg *reg) +{ + out_be32(®->status_cfg, 0); + out_be32(®->luminance, 0x9512a254); + out_be32(®->chroma_r, 0x03310000); + out_be32(®->chroma_g, 0x06600f38); + out_be32(®->chroma_b, 0x00000409); + out_be32(®->field_base_addr, 0); + out_be32(®->dma_inc, 0); + out_be32(®->picture_count, 0x01e002d0); + out_be32(®->req_alarm, 0x00000090); + out_be32(®->alpha, 0x000000ff); +} + +static int viu_mmap(struct file *file, struct vm_area_struct *vma) +{ + struct viu_fh *fh = file->private_data; + int ret; + + dprintk(1, "mmap called, vma=0x%08lx\n", (unsigned long)vma); + + ret = videobuf_mmap_mapper(&fh->vb_vidq, vma); + + dprintk(1, "vma start=0x%08lx, size=%ld, ret=%d\n", + (unsigned long)vma->vm_start, + (unsigned long)vma->vm_end-(unsigned long)vma->vm_start, + ret); + + return ret; +} + +static struct v4l2_file_operations viu_fops = { + .owner = THIS_MODULE, + .open = viu_open, + .release = viu_release, + .read = viu_read, + .poll = viu_poll, + .ioctl = video_ioctl2, /* V4L2 ioctl handler */ + .mmap = viu_mmap, +}; + +static const struct v4l2_ioctl_ops viu_ioctl_ops = { + .vidioc_querycap = vidioc_querycap, + .vidioc_enum_fmt_vid_cap = vidioc_enum_fmt, + .vidioc_g_fmt_vid_cap = vidioc_g_fmt_cap, + .vidioc_try_fmt_vid_cap = vidioc_try_fmt_cap, + .vidioc_s_fmt_vid_cap = vidioc_s_fmt_cap, + .vidioc_enum_fmt_vid_overlay = vidioc_enum_fmt, + .vidioc_g_fmt_vid_overlay = vidioc_g_fmt_overlay, + .vidioc_try_fmt_vid_overlay = vidioc_try_fmt_overlay, + .vidioc_s_fmt_vid_overlay = vidioc_s_fmt_overlay, + .vidioc_g_fbuf = vidioc_g_fbuf, + .vidioc_s_fbuf = vidioc_s_fbuf, + .vidioc_reqbufs = vidioc_reqbufs, + .vidioc_querybuf = vidioc_querybuf, + .vidioc_qbuf = vidioc_qbuf, + .vidioc_dqbuf = vidioc_dqbuf, + .vidioc_s_std = vidioc_s_std, + .vidioc_enum_input = vidioc_enum_input, + .vidioc_g_input = vidioc_g_input, + .vidioc_s_input = vidioc_s_input, + .vidioc_queryctrl = vidioc_queryctrl, + .vidioc_g_ctrl = vidioc_g_ctrl, + .vidioc_s_ctrl = vidioc_s_ctrl, + .vidioc_streamon = vidioc_streamon, + .vidioc_streamoff = vidioc_streamoff, +}; + +static struct video_device viu_template = { + .name = "FSL viu", + .fops = &viu_fops, + .minor = -1, + .ioctl_ops = &viu_ioctl_ops, + .release = video_device_release, + + .tvnorms = V4L2_STD_NTSC_M | V4L2_STD_PAL, + .current_norm = V4L2_STD_NTSC_M, +}; + +static int __devinit viu_of_probe(struct of_device *op, + const struct of_device_id *match) +{ + struct viu_dev *viu_dev; + struct video_device *vdev; + struct resource r; + struct viu_reg __iomem *viu_regs; + struct i2c_adapter *ad; + int ret, viu_irq; + + ret = of_address_to_resource(op->dev.of_node, 0, &r); + if (ret) { + dev_err(&op->dev, "Can't parse device node resource\n"); + return -ENODEV; + } + + viu_irq = irq_of_parse_and_map(op->dev.of_node, 0); + if (viu_irq == NO_IRQ) { + dev_err(&op->dev, "Error while mapping the irq\n"); + return -EINVAL; + } + + /* request mem region */ + if (!devm_request_mem_region(&op->dev, r.start, + sizeof(struct viu_reg), DRV_NAME)) { + dev_err(&op->dev, "Error while requesting mem region\n"); + ret = -EBUSY; + goto err; + } + + /* remap registers */ + viu_regs = devm_ioremap(&op->dev, r.start, sizeof(struct viu_reg)); + if (!viu_regs) { + dev_err(&op->dev, "Can't map register set\n"); + ret = -ENOMEM; + goto err; + } + + /* Prepare our private structure */ + viu_dev = devm_kzalloc(&op->dev, sizeof(struct viu_dev), GFP_ATOMIC); + if (!viu_dev) { + dev_err(&op->dev, "Can't allocate private structure\n"); + ret = -ENOMEM; + goto err; + } + + viu_dev->vr = viu_regs; + viu_dev->irq = viu_irq; + viu_dev->dev = &op->dev; + + /* init video dma queues */ + INIT_LIST_HEAD(&viu_dev->vidq.active); + INIT_LIST_HEAD(&viu_dev->vidq.queued); + + /* initialize locks */ + mutex_init(&viu_dev->lock); + + snprintf(viu_dev->v4l2_dev.name, + sizeof(viu_dev->v4l2_dev.name), "%s", "VIU"); + ret = v4l2_device_register(viu_dev->dev, &viu_dev->v4l2_dev); + if (ret < 0) { + dev_err(&op->dev, "v4l2_device_register() failed: %d\n", ret); + goto err; + } + + ad = i2c_get_adapter(0); + viu_dev->decoder = v4l2_i2c_new_subdev(&viu_dev->v4l2_dev, ad, + "saa7115", "saa7113", VIU_VIDEO_DECODER_ADDR, NULL); + + viu_dev->vidq.timeout.function = viu_vid_timeout; + viu_dev->vidq.timeout.data = (unsigned long)viu_dev; + init_timer(&viu_dev->vidq.timeout); + viu_dev->first = 1; + + /* Allocate memory for video device */ + vdev = video_device_alloc(); + if (vdev == NULL) { + ret = -ENOMEM; + goto err_vdev; + } + + memcpy(vdev, &viu_template, sizeof(viu_template)); + + vdev->v4l2_dev = &viu_dev->v4l2_dev; + + viu_dev->vdev = vdev; + + video_set_drvdata(viu_dev->vdev, viu_dev); + + ret = video_register_device(viu_dev->vdev, VFL_TYPE_GRABBER, -1); + if (ret < 0) { + video_device_release(viu_dev->vdev); + goto err_vdev; + } + + /* enable VIU clock */ + viu_dev->clk = clk_get(&op->dev, "viu_clk"); + if (IS_ERR(viu_dev->clk)) { + dev_err(&op->dev, "failed to find the clock module!\n"); + ret = -ENODEV; + goto err_clk; + } else { + clk_enable(viu_dev->clk); + } + + /* reset VIU module */ + viu_reset(viu_dev->vr); + + /* install interrupt handler */ + if (request_irq(viu_dev->irq, viu_intr, 0, "viu", (void *)viu_dev)) { + dev_err(&op->dev, "Request VIU IRQ failed.\n"); + ret = -ENODEV; + goto err_irq; + } + + dev_info(&op->dev, "Freescale VIU Video Capture Board\n"); + return ret; + +err_irq: + clk_disable(viu_dev->clk); + clk_put(viu_dev->clk); +err_clk: + video_unregister_device(viu_dev->vdev); +err_vdev: + i2c_put_adapter(ad); + v4l2_device_unregister(&viu_dev->v4l2_dev); +err: + irq_dispose_mapping(viu_irq); + return ret; +} + +static int __devexit viu_of_remove(struct of_device *op) +{ + struct v4l2_device *v4l2_dev = dev_get_drvdata(&op->dev); + struct viu_dev *dev = container_of(v4l2_dev, struct viu_dev, v4l2_dev); + struct v4l2_subdev *sdev = list_entry(v4l2_dev->subdevs.next, + struct v4l2_subdev, list); + struct i2c_client *client = v4l2_get_subdevdata(sdev); + + free_irq(dev->irq, (void *)dev); + irq_dispose_mapping(dev->irq); + + clk_disable(dev->clk); + clk_put(dev->clk); + + video_unregister_device(dev->vdev); + i2c_put_adapter(client->adapter); + v4l2_device_unregister(&dev->v4l2_dev); + return 0; +} + +#ifdef CONFIG_PM +static int viu_suspend(struct of_device *op, pm_message_t state) +{ + struct v4l2_device *v4l2_dev = dev_get_drvdata(&op->dev); + struct viu_dev *dev = container_of(v4l2_dev, struct viu_dev, v4l2_dev); + + clk_disable(dev->clk); + return 0; +} + +static int viu_resume(struct of_device *op) +{ + struct v4l2_device *v4l2_dev = dev_get_drvdata(&op->dev); + struct viu_dev *dev = container_of(v4l2_dev, struct viu_dev, v4l2_dev); + + clk_enable(dev->clk); + return 0; +} +#endif + +/* + * Initialization and module stuff + */ +static struct of_device_id mpc512x_viu_of_match[] = { + { + .compatible = "fsl,mpc5121-viu", + }, + {}, +}; +MODULE_DEVICE_TABLE(of, mpc512x_viu_of_match); + +static struct of_platform_driver viu_of_platform_driver = { + .probe = viu_of_probe, + .remove = __devexit_p(viu_of_remove), +#ifdef CONFIG_PM + .suspend = viu_suspend, + .resume = viu_resume, +#endif + .driver = { + .name = DRV_NAME, + .owner = THIS_MODULE, + .of_match_table = mpc512x_viu_of_match, + }, +}; + +static int __init viu_init(void) +{ + return of_register_platform_driver(&viu_of_platform_driver); +} + +static void __exit viu_exit(void) +{ + of_unregister_platform_driver(&viu_of_platform_driver); +} + +module_init(viu_init); +module_exit(viu_exit); + +MODULE_DESCRIPTION("Freescale Video-In(VIU)"); +MODULE_AUTHOR("Hongjun Chen"); +MODULE_LICENSE("GPL"); diff --git a/drivers/media/video/gspca/Kconfig b/drivers/media/video/gspca/Kconfig index 5d920e584de..23db0c29f68 100644 --- a/drivers/media/video/gspca/Kconfig +++ b/drivers/media/video/gspca/Kconfig @@ -246,6 +246,15 @@ config USB_GSPCA_SPCA561 To compile this driver as a module, choose M here: the module will be called gspca_spca561. +config USB_GSPCA_SPCA1528 + tristate "SPCA1528 USB Camera Driver" + depends on VIDEO_V4L2 && USB_GSPCA + help + Say Y here if you want support for cameras based on the SPCA1528 chip. + + To compile this driver as a module, choose M here: the + module will be called gspca_spca1528. + config USB_GSPCA_SQ905 tristate "SQ Technologies SQ905 based USB Camera Driver" depends on VIDEO_V4L2 && USB_GSPCA @@ -264,6 +273,15 @@ config USB_GSPCA_SQ905C To compile this driver as a module, choose M here: the module will be called gspca_sq905c. +config USB_GSPCA_SQ930X + tristate "SQ Technologies SQ930X based USB Camera Driver" + depends on VIDEO_V4L2 && USB_GSPCA + help + Say Y here if you want support for cameras based on the SQ930X chip. + + To compile this driver as a module, choose M here: the + module will be called gspca_sq930x. + config USB_GSPCA_STK014 tristate "Syntek DV4000 (STK014) USB Camera Driver" depends on VIDEO_V4L2 && USB_GSPCA diff --git a/drivers/media/video/gspca/Makefile b/drivers/media/video/gspca/Makefile index 6e4cf1ce01c..f6616db0b7f 100644 --- a/drivers/media/video/gspca/Makefile +++ b/drivers/media/video/gspca/Makefile @@ -23,8 +23,10 @@ obj-$(CONFIG_USB_GSPCA_SPCA505) += gspca_spca505.o obj-$(CONFIG_USB_GSPCA_SPCA506) += gspca_spca506.o obj-$(CONFIG_USB_GSPCA_SPCA508) += gspca_spca508.o obj-$(CONFIG_USB_GSPCA_SPCA561) += gspca_spca561.o +obj-$(CONFIG_USB_GSPCA_SPCA1528) += gspca_spca1528.o obj-$(CONFIG_USB_GSPCA_SQ905) += gspca_sq905.o obj-$(CONFIG_USB_GSPCA_SQ905C) += gspca_sq905c.o +obj-$(CONFIG_USB_GSPCA_SQ930X) += gspca_sq930x.o obj-$(CONFIG_USB_GSPCA_SUNPLUS) += gspca_sunplus.o obj-$(CONFIG_USB_GSPCA_STK014) += gspca_stk014.o obj-$(CONFIG_USB_GSPCA_STV0680) += gspca_stv0680.o @@ -58,8 +60,10 @@ gspca_spca505-objs := spca505.o gspca_spca506-objs := spca506.o gspca_spca508-objs := spca508.o gspca_spca561-objs := spca561.o +gspca_spca1528-objs := spca1528.o gspca_sq905-objs := sq905.o gspca_sq905c-objs := sq905c.o +gspca_sq930x-objs := sq930x.o gspca_stk014-objs := stk014.o gspca_stv0680-objs := stv0680.o gspca_sunplus-objs := sunplus.o diff --git a/drivers/media/video/gspca/conex.c b/drivers/media/video/gspca/conex.c index 19fe6b24c9a..d6a75772f3f 100644 --- a/drivers/media/video/gspca/conex.c +++ b/drivers/media/video/gspca/conex.c @@ -41,7 +41,7 @@ struct sd { #define QUALITY_MAX 60 #define QUALITY_DEF 40 - u8 *jpeg_hdr; + u8 jpeg_hdr[JPEG_HDR_SZ]; }; /* V4L2 controls supported by the driver */ @@ -845,9 +845,6 @@ static int sd_start(struct gspca_dev *gspca_dev) struct sd *sd = (struct sd *) gspca_dev; /* create the JPEG header */ - sd->jpeg_hdr = kmalloc(JPEG_HDR_SZ, GFP_KERNEL); - if (!sd->jpeg_hdr) - return -ENOMEM; jpeg_define(sd->jpeg_hdr, gspca_dev->height, gspca_dev->width, 0x22); /* JPEG 411 */ jpeg_set_qual(sd->jpeg_hdr, sd->quality); @@ -862,11 +859,8 @@ static int sd_start(struct gspca_dev *gspca_dev) /* called on streamoff with alt 0 and on disconnect */ static void sd_stop0(struct gspca_dev *gspca_dev) { - struct sd *sd = (struct sd *) gspca_dev; int retry = 50; - kfree(sd->jpeg_hdr); - if (!gspca_dev->present) return; reg_w_val(gspca_dev, 0x0000, 0x00); diff --git a/drivers/media/video/gspca/cpia1.c b/drivers/media/video/gspca/cpia1.c index 58b696f455b..3747a1dcff5 100644 --- a/drivers/media/video/gspca/cpia1.c +++ b/drivers/media/video/gspca/cpia1.c @@ -1760,22 +1760,19 @@ static void sd_pkt_scan(struct gspca_dev *gspca_dev, data[25] == sd->params.roi.colEnd && data[26] == sd->params.roi.rowStart && data[27] == sd->params.roi.rowEnd) { - struct gspca_frame *frame = gspca_get_i_frame(gspca_dev); + u8 *image; atomic_set(&sd->cam_exposure, data[39] * 2); atomic_set(&sd->fps, data[41]); - if (frame == NULL) { - gspca_dev->last_packet_type = DISCARD_PACKET; - return; - } - /* Check for proper EOF for last frame */ - if ((frame->data_end - frame->data) > 4 && - frame->data_end[-4] == 0xff && - frame->data_end[-3] == 0xff && - frame->data_end[-2] == 0xff && - frame->data_end[-1] == 0xff) + image = gspca_dev->image; + if (image != NULL && + gspca_dev->image_len > 4 && + image[gspca_dev->image_len - 4] == 0xff && + image[gspca_dev->image_len - 3] == 0xff && + image[gspca_dev->image_len - 2] == 0xff && + image[gspca_dev->image_len - 1] == 0xff) gspca_frame_add(gspca_dev, LAST_PACKET, NULL, 0); diff --git a/drivers/media/video/gspca/gl860/gl860-mi2020.c b/drivers/media/video/gspca/gl860/gl860-mi2020.c index 7c31b4f2abe..57782e011c9 100644 --- a/drivers/media/video/gspca/gl860/gl860-mi2020.c +++ b/drivers/media/video/gspca/gl860/gl860-mi2020.c @@ -1,6 +1,7 @@ /* Subdriver for the GL860 chip with the MI2020 sensor - * Author Olivier LORIN, from Ice/Soro2005's logs(A), Fret_saw/Hulkie's - * logs(B) and Tricid"s logs(C). With the help of Kytrix/BUGabundo/Blazercist. + * Author Olivier LORIN, from logs by Iceman/Soro2005 + Fret_saw/Hulkie/Tricid + * with the help of Kytrix/BUGabundo/Blazercist. + * Driver achieved thanks to a webcam gift by Kytrix. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -20,47 +21,70 @@ #include "gl860.h" +static u8 dat_wbal1[] = {0x8c, 0xa2, 0x0c}; + static u8 dat_bright1[] = {0x8c, 0xa2, 0x06}; static u8 dat_bright3[] = {0x8c, 0xa1, 0x02}; static u8 dat_bright4[] = {0x90, 0x00, 0x0f}; static u8 dat_bright5[] = {0x8c, 0xa1, 0x03}; static u8 dat_bright6[] = {0x90, 0x00, 0x05}; -static u8 dat_dummy1[] = {0x90, 0x00, 0x06}; -/*static u8 dummy2[] = {0x8c, 0xa1, 0x02};*/ -/*static u8 dummy3[] = {0x90, 0x00, 0x1f};*/ - static u8 dat_hvflip1[] = {0x8c, 0x27, 0x19}; static u8 dat_hvflip3[] = {0x8c, 0x27, 0x3b}; static u8 dat_hvflip5[] = {0x8c, 0xa1, 0x03}; static u8 dat_hvflip6[] = {0x90, 0x00, 0x06}; +static struct idxdata tbl_middle_hvflip_low[] = { + {0x33, "\x90\x00\x06"}, + {6, "\xff\xff\xff"}, + {0x33, "\x90\x00\x06"}, + {6, "\xff\xff\xff"}, + {0x33, "\x90\x00\x06"}, + {6, "\xff\xff\xff"}, + {0x33, "\x90\x00\x06"}, + {6, "\xff\xff\xff"}, +}; + +static struct idxdata tbl_middle_hvflip_big[] = { + {0x33, "\x8c\xa1\x03"}, {0x33, "\x90\x00\x01"}, {0x33, "\x8c\xa1\x20"}, + {0x33, "\x90\x00\x00"}, {0x33, "\x8c\xa7\x02"}, {0x33, "\x90\x00\x00"}, + {102, "\xff\xff\xff"}, + {0x33, "\x8c\xa1\x03"}, {0x33, "\x90\x00\x02"}, {0x33, "\x8c\xa1\x20"}, + {0x33, "\x90\x00\x72"}, {0x33, "\x8c\xa7\x02"}, {0x33, "\x90\x00\x01"}, +}; + +static struct idxdata tbl_end_hvflip[] = { + {0x33, "\x8c\xa1\x02"}, {0x33, "\x90\x00\x1f"}, + {6, "\xff\xff\xff"}, + {0x33, "\x8c\xa1\x02"}, {0x33, "\x90\x00\x1f"}, + {6, "\xff\xff\xff"}, + {0x33, "\x8c\xa1\x02"}, {0x33, "\x90\x00\x1f"}, + {6, "\xff\xff\xff"}, + {0x33, "\x8c\xa1\x02"}, {0x33, "\x90\x00\x1f"}, +}; + static u8 dat_freq1[] = { 0x8c, 0xa4, 0x04 }; static u8 dat_multi5[] = { 0x8c, 0xa1, 0x03 }; static u8 dat_multi6[] = { 0x90, 0x00, 0x05 }; -static struct validx tbl_common1[] = { - {0x0000, 0x0000}, - {1, 0xffff}, /* msleep(35); */ - {0x006a, 0x0007}, {0x0063, 0x0006}, {0x006a, 0x000d}, {0x0000, 0x00c0}, - {0x0010, 0x0010}, {0x0003, 0x00c1}, {0x0042, 0x00c2}, {0x0004, 0x00d8}, - {0x0000, 0x0058}, {0x0002, 0x0004}, {0x0041, 0x0000}, +static struct validx tbl_init_at_startup[] = { + {0x0000, 0x0000}, {0x0010, 0x0010}, {0x0008, 0x00c0}, {0x0001,0x00c1}, + {0x0001, 0x00c2}, {0x0020, 0x0006}, {0x006a, 0x000d}, + {53, 0xffff}, + {0x0040, 0x0000}, {0x0063, 0x0006}, }; -static struct validx tbl_common2[] = { - {0x006a, 0x0007}, - {35, 0xffff}, - {0x00ef, 0x0006}, - {35, 0xffff}, - {0x006a, 0x000d}, - {35, 0xffff}, - {0x0000, 0x00c0}, {0x0010, 0x0010}, {0x0003, 0x00c1}, {0x0042, 0x00c2}, +static struct validx tbl_common_0B[] = { + {0x0002, 0x0004}, {0x006a, 0x0007}, {0x00ef, 0x0006}, {0x006a,0x000d}, + {0x0000, 0x00c0}, {0x0010, 0x0010}, {0x0003, 0x00c1}, {0x0042,0x00c2}, {0x0004, 0x00d8}, {0x0000, 0x0058}, {0x0041, 0x0000}, }; -static struct idxdata tbl_common3[] = { - {0x32, "\x02\x00\x08"}, {0x33, "\xf4\x03\x1d"}, +static struct idxdata tbl_common_3B[] = { + {0x33, "\x86\x25\x01"}, {0x33, "\x86\x25\x00"}, + {2, "\xff\xff\xff"}, + {0x30, "\x1a\x0a\xcc"}, {0x32, "\x02\x00\x08"}, {0x33, "\xf4\x03\x1d"}, {6, "\xff\xff\xff"}, /* 12 */ {0x34, "\x1e\x8f\x09"}, {0x34, "\x1c\x01\x28"}, {0x34, "\x1e\x8f\x09"}, {2, "\xff\xff\xff"}, /* - */ @@ -98,85 +122,58 @@ static struct idxdata tbl_common3[] = { {0x35, "\x50\x00\x06"}, {0x35, "\x48\x07\xff"}, {0x35, "\x60\x05\x89"}, {0x35, "\x58\x07\xff"}, {0x35, "\x40\x00\xa0"}, {0x35, "\x42\x00\x00"}, {0x32, "\x10\x01\xfc"}, {0x33, "\x8c\xa1\x18"}, {0x33, "\x90\x00\x3c"}, - {1, "\xff\xff\xff"}, {0x33, "\x78\x00\x00"}, - {1, "\xff\xff\xff"}, + {2, "\xff\xff\xff"}, {0x35, "\xb8\x1f\x20"}, {0x33, "\x8c\xa2\x06"}, {0x33, "\x90\x00\x10"}, {0x33, "\x8c\xa2\x07"}, {0x33, "\x90\x00\x08"}, {0x33, "\x8c\xa2\x42"}, {0x33, "\x90\x00\x0b"}, {0x33, "\x8c\xa2\x4a"}, {0x33, "\x90\x00\x8c"}, {0x35, "\xba\xfa\x08"}, {0x33, "\x8c\xa2\x02"}, {0x33, "\x90\x00\x22"}, - {0x33, "\x8c\xa2\x03"}, {0x33, "\x90\x00\xbb"}, -}; - -static struct idxdata tbl_common4[] = { - {0x33, "\x8c\x22\x2e"}, {0x33, "\x90\x00\xa0"}, {0x33, "\x8c\xa4\x08"}, + {0x33, "\x8c\xa2\x03"}, {0x33, "\x90\x00\xbb"}, {0x33, "\x8c\xa4\x04"}, + {0x33, "\x90\x00\x80"}, {0x33, "\x8c\xa7\x9d"}, {0x33, "\x90\x00\x00"}, + {0x33, "\x8c\xa7\x9e"}, {0x33, "\x90\x00\x00"}, {0x33, "\x8c\xa2\x0c"}, + {0x33, "\x90\x00\x17"}, {0x33, "\x8c\xa2\x15"}, {0x33, "\x90\x00\x04"}, + {0x33, "\x8c\xa2\x14"}, {0x33, "\x90\x00\x20"}, {0x33, "\x8c\xa1\x03"}, + {0x33, "\x90\x00\x00"}, {0x33, "\x8c\x27\x17"}, {0x33, "\x90\x21\x11"}, + {0x33, "\x8c\x27\x1b"}, {0x33, "\x90\x02\x4f"}, {0x33, "\x8c\x27\x25"}, + {0x33, "\x90\x06\x0f"}, {0x33, "\x8c\x27\x39"}, {0x33, "\x90\x21\x11"}, + {0x33, "\x8c\x27\x3d"}, {0x33, "\x90\x01\x20"}, {0x33, "\x8c\x27\x47"}, + {0x33, "\x90\x09\x4c"}, {0x33, "\x8c\x27\x03"}, {0x33, "\x90\x02\x84"}, + {0x33, "\x8c\x27\x05"}, {0x33, "\x90\x01\xe2"}, {0x33, "\x8c\x27\x07"}, + {0x33, "\x90\x06\x40"}, {0x33, "\x8c\x27\x09"}, {0x33, "\x90\x04\xb0"}, + {0x33, "\x8c\x27\x0d"}, {0x33, "\x90\x00\x00"}, {0x33, "\x8c\x27\x0f"}, + {0x33, "\x90\x00\x00"}, {0x33, "\x8c\x27\x11"}, {0x33, "\x90\x04\xbd"}, + {0x33, "\x8c\x27\x13"}, {0x33, "\x90\x06\x4d"}, {0x33, "\x8c\x27\x15"}, + {0x33, "\x90\x00\x00"}, {0x33, "\x8c\x27\x17"}, {0x33, "\x90\x21\x11"}, + {0x33, "\x8c\x27\x19"}, {0x33, "\x90\x04\x6c"}, {0x33, "\x8c\x27\x1b"}, + {0x33, "\x90\x02\x4f"}, {0x33, "\x8c\x27\x1d"}, {0x33, "\x90\x01\x02"}, + {0x33, "\x8c\x27\x1f"}, {0x33, "\x90\x02\x79"}, {0x33, "\x8c\x27\x21"}, + {0x33, "\x90\x01\x55"}, {0x33, "\x8c\x27\x23"}, {0x33, "\x90\x02\x85"}, + {0x33, "\x8c\x27\x25"}, {0x33, "\x90\x06\x0f"}, {0x33, "\x8c\x27\x27"}, + {0x33, "\x90\x20\x20"}, {0x33, "\x8c\x27\x29"}, {0x33, "\x90\x20\x20"}, + {0x33, "\x8c\x27\x2b"}, {0x33, "\x90\x10\x20"}, {0x33, "\x8c\x27\x2d"}, + {0x33, "\x90\x20\x07"}, {0x33, "\x8c\x27\x2f"}, {0x33, "\x90\x00\x04"}, + {0x33, "\x8c\x27\x31"}, {0x33, "\x90\x00\x04"}, {0x33, "\x8c\x27\x33"}, + {0x33, "\x90\x04\xbb"}, {0x33, "\x8c\x27\x35"}, {0x33, "\x90\x06\x4b"}, + {0x33, "\x8c\x27\x37"}, {0x33, "\x90\x00\x00"}, {0x33, "\x8c\x27\x39"}, + {0x33, "\x90\x21\x11"}, {0x33, "\x8c\x27\x3b"}, {0x33, "\x90\x00\x24"}, + {0x33, "\x8c\x27\x3d"}, {0x33, "\x90\x01\x20"}, {0x33, "\x8c\x27\x41"}, + {0x33, "\x90\x01\x69"}, {0x33, "\x8c\x27\x45"}, {0x33, "\x90\x04\xed"}, + {0x33, "\x8c\x27\x47"}, {0x33, "\x90\x09\x4c"}, {0x33, "\x8c\x27\x51"}, + {0x33, "\x90\x00\x00"}, {0x33, "\x8c\x27\x53"}, {0x33, "\x90\x03\x20"}, + {0x33, "\x8c\x27\x55"}, {0x33, "\x90\x00\x00"}, {0x33, "\x8c\x27\x57"}, + {0x33, "\x90\x02\x58"}, {0x33, "\x8c\x27\x5f"}, {0x33, "\x90\x00\x00"}, + {0x33, "\x8c\x27\x61"}, {0x33, "\x90\x06\x40"}, {0x33, "\x8c\x27\x63"}, + {0x33, "\x90\x00\x00"}, {0x33, "\x8c\x27\x65"}, {0x33, "\x90\x04\xb0"}, + {0x33, "\x8c\x22\x2e"}, {0x33, "\x90\x00\xa1"}, {0x33, "\x8c\xa4\x08"}, {0x33, "\x90\x00\x1f"}, {0x33, "\x8c\xa4\x09"}, {0x33, "\x90\x00\x21"}, {0x33, "\x8c\xa4\x0a"}, {0x33, "\x90\x00\x25"}, {0x33, "\x8c\xa4\x0b"}, - {0x33, "\x90\x00\x27"}, {0x33, "\x8c\x24\x11"}, {0x33, "\x90\x00\xa0"}, - {0x33, "\x8c\x24\x13"}, {0x33, "\x90\x00\xc0"}, {0x33, "\x8c\x24\x15"}, - {0x33, "\x90\x00\xa0"}, {0x33, "\x8c\x24\x17"}, {0x33, "\x90\x00\xc0"}, -}; - -static struct idxdata tbl_common5[] = { - {0x33, "\x8c\xa4\x04"}, {0x33, "\x90\x00\x80"}, {0x33, "\x8c\xa7\x9d"}, - {0x33, "\x90\x00\x00"}, {0x33, "\x8c\xa7\x9e"}, {0x33, "\x90\x00\x00"}, - {0x33, "\x8c\xa2\x0c"}, {0x33, "\x90\x00\x17"}, {0x33, "\x8c\xa2\x15"}, - {0x33, "\x90\x00\x04"}, {0x33, "\x8c\xa2\x14"}, {0x33, "\x90\x00\x20"}, - {0x33, "\x8c\xa1\x03"}, {0x33, "\x90\x00\x00"}, {0x33, "\x8c\x27\x17"}, - /* msleep(53); */ - {0x33, "\x90\x21\x11"}, {0x33, "\x8c\x27\x1b"}, {0x33, "\x90\x02\x4f"}, - {0x33, "\x8c\x27\x25"}, {0x33, "\x90\x06\x0f"}, {0x33, "\x8c\x27\x39"}, - {0x33, "\x90\x21\x11"}, {0x33, "\x8c\x27\x3d"}, {0x33, "\x90\x01\x20"}, - {0x33, "\x8c\x27\x47"}, {0x33, "\x90\x09\x4c"}, {0x33, "\x8c\x27\x03"}, - {0x33, "\x90\x02\x84"}, {0x33, "\x8c\x27\x05"}, {0x33, "\x90\x01\xe2"}, - {0x33, "\x8c\x27\x07"}, {0x33, "\x90\x06\x40"}, {0x33, "\x8c\x27\x09"}, - {0x33, "\x90\x04\xb0"}, {0x33, "\x8c\x27\x0d"}, {0x33, "\x90\x00\x00"}, - {0x33, "\x8c\x27\x0f"}, {0x33, "\x90\x00\x00"}, {0x33, "\x8c\x27\x11"}, - {0x33, "\x90\x04\xbd"}, {0x33, "\x8c\x27\x13"}, {0x33, "\x90\x06\x4d"}, - {0x33, "\x8c\x27\x15"}, {0x33, "\x90\x00\x00"}, {0x33, "\x8c\x27\x17"}, - {0x33, "\x90\x21\x11"}, {0x33, "\x8c\x27\x19"}, {0x33, "\x90\x04\x6c"}, - {0x33, "\x8c\x27\x1b"}, {0x33, "\x90\x02\x4f"}, {0x33, "\x8c\x27\x1d"}, - {0x33, "\x90\x01\x02"}, {0x33, "\x8c\x27\x1f"}, {0x33, "\x90\x02\x79"}, - {0x33, "\x8c\x27\x21"}, {0x33, "\x90\x01\x55"}, {0x33, "\x8c\x27\x23"}, - {0x33, "\x90\x02\x85"}, {0x33, "\x8c\x27\x25"}, {0x33, "\x90\x06\x0f"}, - {0x33, "\x8c\x27\x27"}, {0x33, "\x90\x20\x20"}, {0x33, "\x8c\x27\x29"}, - {0x33, "\x90\x20\x20"}, {0x33, "\x8c\x27\x2b"}, {0x33, "\x90\x10\x20"}, - {0x33, "\x8c\x27\x2d"}, {0x33, "\x90\x20\x07"}, {0x33, "\x8c\x27\x2f"}, - {0x33, "\x90\x00\x04"}, {0x33, "\x8c\x27\x31"}, {0x33, "\x90\x00\x04"}, - {0x33, "\x8c\x27\x33"}, {0x33, "\x90\x04\xbb"}, {0x33, "\x8c\x27\x35"}, - {0x33, "\x90\x06\x4b"}, {0x33, "\x8c\x27\x37"}, {0x33, "\x90\x00\x00"}, - {0x33, "\x8c\x27\x39"}, {0x33, "\x90\x21\x11"}, {0x33, "\x8c\x27\x3b"}, - {0x33, "\x90\x00\x24"}, {0x33, "\x8c\x27\x3d"}, {0x33, "\x90\x01\x20"}, - {0x33, "\x8c\x27\x41"}, {0x33, "\x90\x01\x69"}, {0x33, "\x8c\x27\x45"}, - {0x33, "\x90\x04\xed"}, {0x33, "\x8c\x27\x47"}, {0x33, "\x90\x09\x4c"}, - {0x33, "\x8c\x27\x51"}, {0x33, "\x90\x00\x00"}, {0x33, "\x8c\x27\x53"}, - {0x33, "\x90\x03\x20"}, {0x33, "\x8c\x27\x55"}, {0x33, "\x90\x00\x00"}, - {0x33, "\x8c\x27\x57"}, {0x33, "\x90\x02\x58"}, {0x33, "\x8c\x27\x5f"}, - {0x33, "\x90\x00\x00"}, {0x33, "\x8c\x27\x61"}, {0x33, "\x90\x06\x40"}, - {0x33, "\x8c\x27\x63"}, {0x33, "\x90\x00\x00"}, {0x33, "\x8c\x27\x65"}, - {0x33, "\x90\x04\xb0"}, {0x33, "\x8c\x22\x2e"}, {0x33, "\x90\x00\xa1"}, - {0x33, "\x8c\xa4\x08"}, {0x33, "\x90\x00\x1f"}, {0x33, "\x8c\xa4\x09"}, - {0x33, "\x90\x00\x21"}, {0x33, "\x8c\xa4\x0a"}, {0x33, "\x90\x00\x25"}, - {0x33, "\x8c\xa4\x0b"}, {0x33, "\x90\x00\x27"}, {0x33, "\x8c\x24\x11"}, - {0x33, "\x90\x00\xa1"}, {0x33, "\x8c\x24\x13"}, {0x33, "\x90\x00\xc1"}, - {0x33, "\x8c\x24\x15"}, -}; - -static struct validx tbl_init_at_startup[] = { - {0x0000, 0x0000}, - {53, 0xffff}, - {0x0010, 0x0010}, - {53, 0xffff}, - {0x0008, 0x00c0}, - {53, 0xffff}, - {0x0001, 0x00c1}, - {53, 0xffff}, - {0x0001, 0x00c2}, - {53, 0xffff}, - {0x0020, 0x0006}, - {53, 0xffff}, - {0x006a, 0x000d}, - {53, 0xffff}, + {0x33, "\x90\x00\x27"}, {0x33, "\x8c\x24\x11"}, {0x33, "\x90\x00\xa1"}, + {0x33, "\x8c\x24\x13"}, {0x33, "\x90\x00\xc1"}, {0x33, "\x8c\x24\x15"}, + {0x33, "\x90\x00\x6a"}, {0x33, "\x8c\x24\x17"}, {0x33, "\x90\x00\x80"}, + {0x33, "\x8c\xa1\x03"}, {0x33, "\x90\x00\x05"}, + {2, "\xff\xff\xff"}, + {0x33, "\x8c\xa1\x03"}, {0x33, "\x90\x00\x06"}, + {3, "\xff\xff\xff"}, }; static struct idxdata tbl_init_post_alt_low1[] = { @@ -209,7 +206,7 @@ static struct idxdata tbl_init_post_alt_low3[] = { {2, "\xff\xff\xff"}, {0x33, "\x8c\xa1\x20"}, {0x33, "\x90\x00\x00"}, {0x33, "\x8c\xa1\x03"}, {0x33, "\x90\x00\x01"}, {0x33, "\x8c\xa7\x02"}, {0x33, "\x90\x00\x00"}, - {2, "\xff\xff\xff"}, /* - * */ + {2, "\xff\xff\xff"}, {0x33, "\x8c\xa1\x03"}, {0x33, "\x90\x00\x05"}, {2, "\xff\xff\xff"}, {0x33, "\x8c\xa1\x03"}, {0x33, "\x90\x00\x06"}, @@ -217,61 +214,15 @@ static struct idxdata tbl_init_post_alt_low3[] = { {0x33, "\x8c\xa1\x03"}, {0x33, "\x90\x00\x05"}, {2, "\xff\xff\xff"}, {0x33, "\x8c\xa1\x03"}, {0x33, "\x90\x00\x06"}, - {1, "\xff\xff\xff"}, -}; - -static struct idxdata tbl_init_post_alt_low4[] = { - {0x32, "\x10\x01\xf8"}, {0x34, "\xce\x01\xa8"}, {0x34, "\xd0\x66\x33"}, - {0x34, "\xd2\x31\x9a"}, {0x34, "\xd4\x94\x63"}, {0x34, "\xd6\x4b\x25"}, - {0x34, "\xd8\x26\x70"}, {0x34, "\xda\x72\x4c"}, {0x34, "\xdc\xff\x04"}, - {0x34, "\xde\x01\x5b"}, {0x34, "\xe6\x01\x13"}, {0x34, "\xee\x0b\xf0"}, - {0x34, "\xf6\x0b\xa4"}, {0x35, "\x00\xf6\xe7"}, {0x35, "\x08\x0d\xfd"}, - {0x35, "\x10\x25\x63"}, {0x35, "\x18\x35\x6c"}, {0x35, "\x20\x42\x7e"}, - {0x35, "\x28\x19\x44"}, {0x35, "\x30\x39\xd4"}, {0x35, "\x38\xf5\xa8"}, - {0x35, "\x4c\x07\x90"}, {0x35, "\x44\x07\xb8"}, {0x35, "\x5c\x06\x88"}, - {0x35, "\x54\x07\xff"}, {0x34, "\xe0\x01\x52"}, {0x34, "\xe8\x00\xcc"}, - {0x34, "\xf0\x0d\x83"}, {0x34, "\xf8\x0c\xb3"}, {0x35, "\x02\xfe\xba"}, - {0x35, "\x0a\x04\xe0"}, {0x35, "\x12\x1c\x63"}, {0x35, "\x1a\x2b\x5a"}, - {0x35, "\x22\x32\x5e"}, {0x35, "\x2a\x0d\x28"}, {0x35, "\x32\x2c\x02"}, - {0x35, "\x3a\xf4\xfa"}, {0x35, "\x4e\x07\xef"}, {0x35, "\x46\x07\x88"}, - {0x35, "\x5e\x07\xc1"}, {0x35, "\x56\x04\x64"}, {0x34, "\xe4\x01\x15"}, - {0x34, "\xec\x00\x82"}, {0x34, "\xf4\x0c\xce"}, {0x34, "\xfc\x0c\xba"}, - {0x35, "\x06\x1f\x02"}, {0x35, "\x0e\x02\xe3"}, {0x35, "\x16\x1a\x50"}, - {0x35, "\x1e\x24\x39"}, {0x35, "\x26\x23\x4c"}, {0x35, "\x2e\xf9\x1b"}, - {0x35, "\x36\x23\x19"}, {0x35, "\x3e\x12\x08"}, {0x35, "\x52\x07\x22"}, - {0x35, "\x4a\x03\xd3"}, {0x35, "\x62\x06\x54"}, {0x35, "\x5a\x04\x5d"}, - {0x34, "\xe2\x01\x04"}, {0x34, "\xea\x00\xa0"}, {0x34, "\xf2\x0c\xbc"}, - {0x34, "\xfa\x0c\x5b"}, {0x35, "\x04\x17\xf2"}, {0x35, "\x0c\x02\x08"}, - {0x35, "\x14\x28\x43"}, {0x35, "\x1c\x28\x62"}, {0x35, "\x24\x2b\x60"}, - {0x35, "\x2c\x07\x33"}, {0x35, "\x34\x1f\xb0"}, {0x35, "\x3c\xed\xcd"}, - {0x35, "\x50\x00\x06"}, {0x35, "\x48\x07\xff"}, {0x35, "\x60\x05\x89"}, - {0x35, "\x58\x07\xff"}, {0x35, "\x40\x00\xa0"}, {0x35, "\x42\x00\x00"}, - {0x32, "\x10\x01\xfc"}, {0x33, "\x8c\xa1\x18"}, - /* Flip/Mirror h/v=1 */ - {0x33, "\x90\x00\x3c"}, {0x33, "\x8c\x27\x19"}, {0x33, "\x90\x04\x6c"}, - {0x33, "\x8c\x27\x3b"}, {0x33, "\x90\x00\x24"}, {0x33, "\x8c\xa1\x03"}, - {0x33, "\x90\x00\x06"}, - {130, "\xff\xff\xff"}, - {0x33, "\x90\x00\x06"}, {0x33, "\x90\x00\x06"}, {0x33, "\x90\x00\x06"}, - {0x33, "\x90\x00\x06"}, {0x33, "\x90\x00\x06"}, {0x33, "\x90\x00\x06"}, - {100, "\xff\xff\xff"}, - /* ?? */ - {0x33, "\x8c\xa1\x02"}, {0x33, "\x90\x00\x1f"}, {0x33, "\x8c\xa1\x02"}, - {0x33, "\x90\x00\x1f"}, {0x33, "\x8c\xa1\x02"}, {0x33, "\x90\x00\x1f"}, - {0x33, "\x8c\xa1\x02"}, {0x33, "\x90\x00\x1f"}, - /* Brigthness=70 */ - {0x33, "\x8c\xa2\x06"}, {0x33, "\x90\x00\x46"}, {0x33, "\x8c\xa1\x02"}, - {0x33, "\x90\x00\x0f"}, {0x33, "\x8c\xa1\x03"}, {0x33, "\x90\x00\x05"}, - /* Sharpness=20 */ - {0x32, "\x6c\x14\x08"}, }; -static struct idxdata tbl_init_post_alt_big1[] = { +static struct idxdata tbl_init_post_alt_big[] = { {0x33, "\x8c\xa1\x03"}, {0x33, "\x90\x00\x05"}, {2, "\xff\xff\xff"}, {0x33, "\x8c\xa1\x03"}, {0x33, "\x90\x00\x06"}, {2, "\xff\xff\xff"}, {0x34, "\x1e\x8f\x09"}, {0x34, "\x1c\x01\x28"}, {0x34, "\x1e\x8f\x09"}, + {2, "\xff\xff\xff"}, {0x34, "\x1e\x8f\x09"}, {0x32, "\x14\x06\xe6"}, {0x33, "\x8c\xa1\x03"}, {0x33, "\x90\x00\x05"}, {2, "\xff\xff\xff"}, @@ -285,9 +236,17 @@ static struct idxdata tbl_init_post_alt_big1[] = { {0x33, "\x90\x00\x03"}, {0x33, "\x8c\xa1\x34"}, {0x33, "\x90\x00\x03"}, {0x33, "\x8c\xa1\x03"}, {0x33, "\x90\x00\x02"}, {0x33, "\x2e\x01\x00"}, {0x34, "\x04\x00\x2a"}, {0x33, "\x8c\xa7\x02"}, {0x33, "\x90\x00\x01"}, + {0x33, "\x8c\x27\x97"}, {0x33, "\x90\x01\x00"}, + {51, "\xff\xff\xff"}, + {0x33, "\x8c\xa1\x20"}, {0x33, "\x90\x00\x00"}, {0x33, "\x8c\xa1\x03"}, + {0x33, "\x90\x00\x01"}, {0x33, "\x8c\xa7\x02"}, {0x33, "\x90\x00\x00"}, + {51, "\xff\xff\xff"}, + {0x33, "\x8c\xa1\x20"}, {0x33, "\x90\x00\x72"}, {0x33, "\x8c\xa1\x03"}, + {0x33, "\x90\x00\x02"}, {0x33, "\x8c\xa7\x02"}, {0x33, "\x90\x00\x01"}, + {51, "\xff\xff\xff"}, }; -static struct idxdata tbl_init_post_alt_big2[] = { +static struct idxdata tbl_init_post_alt_3B[] = { {0x32, "\x10\x01\xf8"}, {0x34, "\xce\x01\xa8"}, {0x34, "\xd0\x66\x33"}, {0x34, "\xd2\x31\x9a"}, {0x34, "\xd4\x94\x63"}, {0x34, "\xd6\x4b\x25"}, {0x34, "\xd8\x26\x70"}, {0x34, "\xda\x72\x4c"}, {0x34, "\xdc\xff\x04"}, @@ -316,17 +275,6 @@ static struct idxdata tbl_init_post_alt_big2[] = { {0x32, "\x10\x01\xfc"}, {0x33, "\x8c\xa1\x18"}, {0x33, "\x90\x00\x3c"}, }; -static struct idxdata tbl_init_post_alt_big3[] = { - {0x33, "\x8c\xa1\x02"}, - {0x33, "\x90\x00\x1f"}, - {0x33, "\x8c\xa1\x02"}, - {0x33, "\x90\x00\x1f"}, - {0x33, "\x8c\xa1\x02"}, - {0x33, "\x90\x00\x1f"}, - {0x33, "\x8c\xa1\x02"}, - {0x33, "\x90\x00\x1f"}, -}; - static u8 *dat_640 = "\xd0\x02\xd1\x08\xd2\xe1\xd3\x02\xd4\x10\xd5\x81"; static u8 *dat_800 = "\xd0\x02\xd1\x10\xd2\x57\xd3\x02\xd4\x18\xd5\x21"; static u8 *dat_1280 = "\xd0\x02\xd1\x20\xd2\x01\xd3\x02\xd4\x28\xd5\x01"; @@ -351,7 +299,7 @@ void mi2020_init_settings(struct gspca_dev *gspca_dev) sd->vcur.gamma = 0; sd->vcur.hue = 0; sd->vcur.saturation = 60; - sd->vcur.whitebal = 50; + sd->vcur.whitebal = 0; /* 50, not done by hardware */ sd->vcur.mirror = 0; sd->vcur.flip = 0; sd->vcur.AC50Hz = 1; @@ -361,17 +309,12 @@ void mi2020_init_settings(struct gspca_dev *gspca_dev) sd->vmax.sharpness = 40; sd->vmax.contrast = 3; sd->vmax.gamma = 2; - sd->vmax.hue = 0 + 1; /* 200 */ - sd->vmax.saturation = 0; /* 100 */ - sd->vmax.whitebal = 0; /* 100 */ + sd->vmax.hue = 0 + 1; /* 200, not done by hardware */ + sd->vmax.saturation = 0; /* 100, not done by hardware */ + sd->vmax.whitebal = 2; /* 100, not done by hardware */ sd->vmax.mirror = 1; sd->vmax.flip = 1; sd->vmax.AC50Hz = 1; - if (_MI2020b_) { - sd->vmax.contrast = 0; - sd->vmax.gamma = 0; - sd->vmax.backlight = 0; - } sd->dev_camera_settings = mi2020_camera_settings; sd->dev_init_at_startup = mi2020_init_at_startup; @@ -384,51 +327,9 @@ void mi2020_init_settings(struct gspca_dev *gspca_dev) static void common(struct gspca_dev *gspca_dev) { - s32 reso = gspca_dev->cam.cam_mode[(s32) gspca_dev->curr_mode].priv; - - if (_MI2020b_) { - fetch_validx(gspca_dev, tbl_common1, ARRAY_SIZE(tbl_common1)); - } else { - if (_MI2020_) - ctrl_out(gspca_dev, 0x40, 1, 0x0008, 0x0004, 0, NULL); - else - ctrl_out(gspca_dev, 0x40, 1, 0x0002, 0x0004, 0, NULL); - msleep(35); - fetch_validx(gspca_dev, tbl_common2, ARRAY_SIZE(tbl_common2)); - } - ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, "\x86\x25\x01"); - ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, "\x86\x25\x00"); - msleep(2); /* - * */ - ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0030, 3, "\x1a\x0a\xcc"); - if (reso == IMAGE_1600) - msleep(2); /* 1600 */ - fetch_idxdata(gspca_dev, tbl_common3, ARRAY_SIZE(tbl_common3)); - - if (_MI2020b_ || _MI2020_) - fetch_idxdata(gspca_dev, tbl_common4, - ARRAY_SIZE(tbl_common4)); - - fetch_idxdata(gspca_dev, tbl_common5, ARRAY_SIZE(tbl_common5)); - if (_MI2020b_ || _MI2020_) { - /* Different from fret */ - ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, "\x90\x00\x78"); - /* Same as fret */ - ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, "\x8c\x24\x17"); - /* Different from fret */ - ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, "\x90\x00\x90"); - } else { - ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, "\x90\x00\x6a"); - ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, "\x8c\x24\x17"); - ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, "\x90\x00\x80"); - } - ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, "\x8c\xa1\x03"); - ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, "\x90\x00\x05"); - msleep(2); - ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, "\x8c\xa1\x03"); - if (reso == IMAGE_1600) - msleep(14); /* 1600 */ - ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, "\x90\x00\x06"); - msleep(2); + fetch_validx(gspca_dev, tbl_common_0B, ARRAY_SIZE(tbl_common_0B)); + fetch_idxdata(gspca_dev, tbl_common_3B, ARRAY_SIZE(tbl_common_3B)); + ctrl_out(gspca_dev, 0x40, 1, 0x0041, 0x0000, 0, NULL); } static int mi2020_init_at_startup(struct gspca_dev *gspca_dev) @@ -441,8 +342,16 @@ static int mi2020_init_at_startup(struct gspca_dev *gspca_dev) fetch_validx(gspca_dev, tbl_init_at_startup, ARRAY_SIZE(tbl_init_at_startup)); + ctrl_out(gspca_dev, 0x40, 1, 0x7a00, 0x8030, 0, NULL); + ctrl_in(gspca_dev, 0xc0, 2, 0x7a00, 0x8030, 1, &c); + common(gspca_dev); + msleep(61); +/* ctrl_out(gspca_dev, 0x40, 11, 0x0000, 0x0000, 0, NULL); */ +/* msleep(36); */ + ctrl_out(gspca_dev, 0x40, 1, 0x0001, 0x0000, 0, NULL); + return 0; } @@ -450,17 +359,17 @@ static int mi2020_init_pre_alt(struct gspca_dev *gspca_dev) { struct sd *sd = (struct sd *) gspca_dev; - sd->mirrorMask = 0; + sd->mirrorMask = 0; + sd->vold.hue = -1; - sd->vold.backlight = -1; + /* These controls need to be reset */ sd->vold.brightness = -1; sd->vold.sharpness = -1; - sd->vold.contrast = -1; - sd->vold.gamma = -1; - sd->vold.hue = -1; - sd->vold.mirror = -1; - sd->vold.flip = -1; - sd->vold.AC50Hz = -1; + + /* If not different from default, they do not need to be set */ + sd->vold.contrast = 0; + sd->vold.gamma = 0; + sd->vold.backlight = 0; mi2020_init_post_alt(gspca_dev); @@ -472,10 +381,10 @@ static int mi2020_init_post_alt(struct gspca_dev *gspca_dev) struct sd *sd = (struct sd *) gspca_dev; s32 reso = gspca_dev->cam.cam_mode[(s32) gspca_dev->curr_mode].priv; - s32 backlight = sd->vcur.backlight; s32 mirror = (((sd->vcur.mirror > 0) ^ sd->mirrorMask) > 0); s32 flip = (((sd->vcur.flip > 0) ^ sd->mirrorMask) > 0); s32 freq = (sd->vcur.AC50Hz > 0); + s32 wbal = sd->vcur.whitebal; u8 dat_freq2[] = {0x90, 0x00, 0x80}; u8 dat_multi1[] = {0x8c, 0xa7, 0x00}; @@ -484,6 +393,7 @@ static int mi2020_init_post_alt(struct gspca_dev *gspca_dev) u8 dat_multi4[] = {0x90, 0x00, 0x00}; u8 dat_hvflip2[] = {0x90, 0x04, 0x6c}; u8 dat_hvflip4[] = {0x90, 0x00, 0x24}; + u8 dat_wbal2[] = {0x90, 0x00, 0x00}; u8 c; sd->nbIm = -1; @@ -491,23 +401,26 @@ static int mi2020_init_post_alt(struct gspca_dev *gspca_dev) dat_freq2[2] = freq ? 0xc0 : 0x80; dat_multi1[2] = 0x9d; dat_multi3[2] = dat_multi1[2] + 1; - dat_multi4[2] = dat_multi2[2] = backlight; + if (wbal == 0) { + dat_multi4[2] = dat_multi2[2] = 0; + dat_wbal2[2] = 0x17; + } else if (wbal == 1) { + dat_multi4[2] = dat_multi2[2] = 0; + dat_wbal2[2] = 0x35; + } else if (wbal == 2) { + dat_multi4[2] = dat_multi2[2] = 0x20; + dat_wbal2[2] = 0x17; + } dat_hvflip2[2] = 0x6c + 2 * (1 - flip) + (1 - mirror); dat_hvflip4[2] = 0x24 + 2 * (1 - flip) + (1 - mirror); msleep(200); - ctrl_out(gspca_dev, 0x40, 5, 0x0001, 0x0000, 0, NULL); - msleep(3); /* 35 * */ + msleep(2); common(gspca_dev); - ctrl_out(gspca_dev, 0x40, 1, 0x0041, 0x0000, 0, NULL); - msleep(70); - - if (_MI2020b_) - ctrl_out(gspca_dev, 0x40, 1, 0x0040, 0x0000, 0, NULL); - + msleep(142); ctrl_out(gspca_dev, 0x40, 1, 0x0010, 0x0010, 0, NULL); ctrl_out(gspca_dev, 0x40, 1, 0x0003, 0x00c1, 0, NULL); ctrl_out(gspca_dev, 0x40, 1, 0x0042, 0x00c2, 0, NULL); @@ -523,8 +436,7 @@ static int mi2020_init_post_alt(struct gspca_dev *gspca_dev) ctrl_out(gspca_dev, 0x40, 3, 0x0000, 0x0200, 12, dat_800); - if (_MI2020c_) - fetch_idxdata(gspca_dev, tbl_init_post_alt_low1, + fetch_idxdata(gspca_dev, tbl_init_post_alt_low1, ARRAY_SIZE(tbl_init_post_alt_low1)); if (reso == IMAGE_800) @@ -534,87 +446,10 @@ static int mi2020_init_post_alt(struct gspca_dev *gspca_dev) fetch_idxdata(gspca_dev, tbl_init_post_alt_low3, ARRAY_SIZE(tbl_init_post_alt_low3)); - if (_MI2020b_) { - ctrl_out(gspca_dev, 0x40, 1, 0x0001, 0x0010, 0, NULL); - ctrl_out(gspca_dev, 0x40, 1, 0x0000, 0x00c1, 0, NULL); - ctrl_out(gspca_dev, 0x40, 1, 0x0041, 0x00c2, 0, NULL); - msleep(150); - } else if (_MI2020c_) { - ctrl_out(gspca_dev, 0x40, 1, 0x0010, 0x0010, 0, NULL); - ctrl_out(gspca_dev, 0x40, 1, 0x0000, 0x00c1, 0, NULL); - ctrl_out(gspca_dev, 0x40, 1, 0x0041, 0x00c2, 0, NULL); - msleep(120); - ctrl_out(gspca_dev, 0x40, 1, 0x0040, 0x0000, 0, NULL); - msleep(30); - } else if (_MI2020_) { - ctrl_out(gspca_dev, 0x40, 1, 0x0001, 0x0010, 0, NULL); - ctrl_out(gspca_dev, 0x40, 1, 0x0000, 0x00c1, 0, NULL); - ctrl_out(gspca_dev, 0x40, 1, 0x0041, 0x00c2, 0, NULL); - msleep(120); - ctrl_out(gspca_dev, 0x40, 1, 0x0040, 0x0000, 0, NULL); - msleep(30); - } - - /* AC power frequency */ - ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, dat_freq1); - ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, dat_freq2); - msleep(20); - /* backlight */ - ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, dat_multi1); - ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, dat_multi2); - ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, dat_multi3); - ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, dat_multi4); - /* at init time but not after */ - ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, "\x8c\xa2\x0c"); - ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, "\x90\x00\x17"); - /* finish the backlight */ - ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, dat_multi5); - ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, dat_multi6); - msleep(5);/* " */ - - if (_MI2020c_) { - fetch_idxdata(gspca_dev, tbl_init_post_alt_low4, - ARRAY_SIZE(tbl_init_post_alt_low4)); - } else { - ctrl_in(gspca_dev, 0xc0, 2, 0x0000, 0x0000, 1, &c); - msleep(14); /* 0xd8 */ - - /* flip/mirror */ - ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, - 3, dat_hvflip1); - ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, - 3, dat_hvflip2); - ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, - 3, dat_hvflip3); - ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, - 3, dat_hvflip4); - ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, - 3, dat_hvflip5); - ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, - 3, dat_hvflip6); - msleep(21); - ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, - 3, dat_dummy1); - msleep(5); - ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, - 3, dat_dummy1); - msleep(5); - ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, - 3, dat_dummy1); - msleep(5); - ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, - 3, dat_dummy1); - msleep(5); - ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, - 3, dat_dummy1); - msleep(5); - ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, - 3, dat_dummy1); - /* end of flip/mirror main part */ - msleep(246); /* 146 */ - - sd->nbIm = 0; - } + ctrl_out(gspca_dev, 0x40, 1, 0x0010, 0x0010, 0, NULL); + ctrl_out(gspca_dev, 0x40, 1, 0x0000, 0x00c1, 0, NULL); + ctrl_out(gspca_dev, 0x40, 1, 0x0041, 0x00c2, 0, NULL); + msleep(120); break; case IMAGE_1280: @@ -643,108 +478,62 @@ static int mi2020_init_post_alt(struct gspca_dev *gspca_dev) 3, "\x90\x04\xb0"); } - fetch_idxdata(gspca_dev, tbl_init_post_alt_big1, - ARRAY_SIZE(tbl_init_post_alt_big1)); - - if (reso == IMAGE_1600) - msleep(13); /* 1600 */ - ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, "\x8c\x27\x97"); - ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, "\x90\x01\x00"); - msleep(53); - ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, "\x8c\xa1\x20"); - ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, "\x90\x00\x00"); - ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, "\x8c\xa1\x03"); - ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, "\x90\x00\x01"); - if (reso == IMAGE_1600) - msleep(13); /* 1600 */ - ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, "\x8c\xa7\x02"); - ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, "\x90\x00\x00"); - msleep(53); - ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, "\x8c\xa1\x20"); - ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, "\x90\x00\x72"); - ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, "\x8c\xa1\x03"); - ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, "\x90\x00\x02"); - if (reso == IMAGE_1600) - msleep(13); /* 1600 */ - ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, "\x8c\xa7\x02"); - ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, "\x90\x00\x01"); - msleep(53); - - if (_MI2020b_) { - ctrl_out(gspca_dev, 0x40, 1, 0x0001, 0x0010, 0, NULL); - if (reso == IMAGE_1600) - msleep(500); /* 1600 */ - ctrl_out(gspca_dev, 0x40, 1, 0x0000, 0x00c1, 0, NULL); - ctrl_out(gspca_dev, 0x40, 1, 0x0041, 0x00c2, 0, NULL); - msleep(1850); - } else if (_MI2020c_ || _MI2020_) { - ctrl_out(gspca_dev, 0x40, 1, 0x0001, 0x0010, 0, NULL); - ctrl_out(gspca_dev, 0x40, 1, 0x0000, 0x00c1, 0, NULL); - ctrl_out(gspca_dev, 0x40, 1, 0x0041, 0x00c2, 0, NULL); - msleep(1850); - ctrl_out(gspca_dev, 0x40, 1, 0x0040, 0x0000, 0, NULL); - msleep(30); - } + fetch_idxdata(gspca_dev, tbl_init_post_alt_big, + ARRAY_SIZE(tbl_init_post_alt_big)); - /* AC power frequency */ - ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, dat_freq1); - ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, dat_freq2); - msleep(20); - /* backlight */ - ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, dat_multi1); - ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, dat_multi2); - ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, dat_multi3); - ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, dat_multi4); - /* at init time but not after */ - ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, "\x8c\xa2\x0c"); - ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, "\x90\x00\x17"); - /* finish the backlight */ - ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, dat_multi5); - ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, dat_multi6); - msleep(6); /* " */ + ctrl_out(gspca_dev, 0x40, 1, 0x0001, 0x0010, 0, NULL); + ctrl_out(gspca_dev, 0x40, 1, 0x0000, 0x00c1, 0, NULL); + ctrl_out(gspca_dev, 0x40, 1, 0x0041, 0x00c2, 0, NULL); + msleep(1850); + } - ctrl_in(gspca_dev, 0xc0, 2, 0x0000, 0x0000, 1, &c); - msleep(14); + ctrl_out(gspca_dev, 0x40, 1, 0x0040, 0x0000, 0, NULL); + msleep(40); + + /* AC power frequency */ + ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, dat_freq1); + ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, dat_freq2); + msleep(33); + /* light source */ + ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, dat_multi1); + ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, dat_multi2); + ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, dat_multi3); + ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, dat_multi4); + ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, dat_wbal1); + ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, dat_wbal2); + ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, dat_multi5); + ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, dat_multi6); + msleep(7); + ctrl_in(gspca_dev, 0xc0, 2, 0x0000, 0x0000, 1, &c); + + fetch_idxdata(gspca_dev, tbl_init_post_alt_3B, + ARRAY_SIZE(tbl_init_post_alt_3B)); + + /* hvflip */ + ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, dat_hvflip1); + ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, dat_hvflip2); + ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, dat_hvflip3); + ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, dat_hvflip4); + ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, dat_hvflip5); + ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, dat_hvflip6); + msleep(250); + + if (reso == IMAGE_640 || reso == IMAGE_800) + fetch_idxdata(gspca_dev, tbl_middle_hvflip_low, + ARRAY_SIZE(tbl_middle_hvflip_low)); + else + fetch_idxdata(gspca_dev, tbl_middle_hvflip_big, + ARRAY_SIZE(tbl_middle_hvflip_big)); - if (_MI2020c_) - fetch_idxdata(gspca_dev, tbl_init_post_alt_big2, - ARRAY_SIZE(tbl_init_post_alt_big2)); + fetch_idxdata(gspca_dev, tbl_end_hvflip, + ARRAY_SIZE(tbl_end_hvflip)); - /* flip/mirror */ - ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, dat_hvflip1); - ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, dat_hvflip2); - ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, dat_hvflip3); - ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, dat_hvflip4); - ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, dat_hvflip5); - ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, dat_hvflip6); - /* end of flip/mirror main part */ - msleep(16); - ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, "\x8c\xa1\x03"); - ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, "\x90\x00\x01"); - ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, "\x8c\xa1\x20"); - ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, "\x90\x00\x00"); - if (reso == IMAGE_1600) - msleep(25); /* 1600 */ - ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, "\x8c\xa7\x02"); - ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, "\x90\x00\x00"); - msleep(103); - ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, "\x8c\xa1\x03"); - ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, "\x90\x00\x02"); - ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, "\x8c\xa1\x20"); - ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, "\x90\x00\x72"); - ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, "\x8c\xa7\x02"); - ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, "\x90\x00\x01"); - sd->nbIm = 0; - - if (_MI2020c_) - fetch_idxdata(gspca_dev, tbl_init_post_alt_big3, - ARRAY_SIZE(tbl_init_post_alt_big3)); - } + sd->nbIm = 0; sd->vold.mirror = mirror; sd->vold.flip = flip; sd->vold.AC50Hz = freq; - sd->vold.backlight = backlight; + sd->vold.whitebal = wbal; mi2020_camera_settings(gspca_dev); @@ -772,6 +561,7 @@ static int mi2020_configure_alt(struct gspca_dev *gspca_dev) static int mi2020_camera_settings(struct gspca_dev *gspca_dev) { struct sd *sd = (struct sd *) gspca_dev; + s32 reso = gspca_dev->cam.cam_mode[(s32) gspca_dev->curr_mode].priv; s32 backlight = sd->vcur.backlight; s32 bright = sd->vcur.brightness; @@ -782,6 +572,7 @@ static int mi2020_camera_settings(struct gspca_dev *gspca_dev) s32 mirror = (((sd->vcur.mirror > 0) ^ sd->mirrorMask) > 0); s32 flip = (((sd->vcur.flip > 0) ^ sd->mirrorMask) > 0); s32 freq = (sd->vcur.AC50Hz > 0); + s32 wbal = sd->vcur.whitebal; u8 dat_sharp[] = {0x6c, 0x00, 0x08}; u8 dat_bright2[] = {0x90, 0x00, 0x00}; @@ -792,6 +583,7 @@ static int mi2020_camera_settings(struct gspca_dev *gspca_dev) u8 dat_multi4[] = {0x90, 0x00, 0x00}; u8 dat_hvflip2[] = {0x90, 0x04, 0x6c}; u8 dat_hvflip4[] = {0x90, 0x00, 0x24}; + u8 dat_wbal2[] = {0x90, 0x00, 0x00}; /* Less than 4 images received -> too early to set the settings */ if (sd->nbIm < 4) { @@ -809,67 +601,89 @@ static int mi2020_camera_settings(struct gspca_dev *gspca_dev) msleep(20); } + if (wbal != sd->vold.whitebal) { + sd->vold.whitebal = wbal; + if (wbal < 0 || wbal > sd->vmax.whitebal) + wbal = 0; + + dat_multi1[2] = 0x9d; + dat_multi3[2] = dat_multi1[2] + 1; + if (wbal == 0) { + dat_multi4[2] = dat_multi2[2] = 0; + dat_wbal2[2] = 0x17; + } else if (wbal == 1) { + dat_multi4[2] = dat_multi2[2] = 0; + dat_wbal2[2] = 0x35; + } else if (wbal == 2) { + dat_multi4[2] = dat_multi2[2] = 0x20; + dat_wbal2[2] = 0x17; + } + ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, dat_multi1); + ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, dat_multi2); + ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, dat_multi3); + ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, dat_multi4); + ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, dat_wbal1); + ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, dat_wbal2); + ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, dat_multi5); + ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, dat_multi6); + } + if (mirror != sd->vold.mirror || flip != sd->vold.flip) { sd->vold.mirror = mirror; sd->vold.flip = flip; dat_hvflip2[2] = 0x6c + 2 * (1 - flip) + (1 - mirror); dat_hvflip4[2] = 0x24 + 2 * (1 - flip) + (1 - mirror); + + fetch_idxdata(gspca_dev, tbl_init_post_alt_3B, + ARRAY_SIZE(tbl_init_post_alt_3B)); + ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, dat_hvflip1); ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, dat_hvflip2); ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, dat_hvflip3); ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, dat_hvflip4); ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, dat_hvflip5); ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, dat_hvflip6); - msleep(130); - ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, dat_dummy1); - msleep(6); - ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, dat_dummy1); - msleep(6); - ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, dat_dummy1); - msleep(6); - ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, dat_dummy1); - msleep(6); - ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, dat_dummy1); - msleep(6); - ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, dat_dummy1); - msleep(6); - - /* Sometimes present, sometimes not, useful? */ - /* ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, dummy2); - * ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, dummy3); - * ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, dummy2); - * ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, dummy3); - * ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, dummy2); - * ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, dummy3); - * ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, dummy2); - * ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, dummy3);*/ + msleep(40); + + if (reso == IMAGE_640 || reso == IMAGE_800) + fetch_idxdata(gspca_dev, tbl_middle_hvflip_low, + ARRAY_SIZE(tbl_middle_hvflip_low)); + else + fetch_idxdata(gspca_dev, tbl_middle_hvflip_big, + ARRAY_SIZE(tbl_middle_hvflip_big)); + + fetch_idxdata(gspca_dev, tbl_end_hvflip, + ARRAY_SIZE(tbl_end_hvflip)); } - if (backlight != sd->vold.backlight) { - sd->vold.backlight = backlight; - if (backlight < 0 || backlight > sd->vmax.backlight) - backlight = 0; + if (bright != sd->vold.brightness) { + sd->vold.brightness = bright; + if (bright < 0 || bright > sd->vmax.brightness) + bright = 0; - dat_multi1[2] = 0x9d; - dat_multi3[2] = dat_multi1[2] + 1; - dat_multi4[2] = dat_multi2[2] = backlight; - ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, dat_multi1); - ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, dat_multi2); - ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, dat_multi3); - ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, dat_multi4); - ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, dat_multi5); - ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, dat_multi6); + dat_bright2[2] = bright; + ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, dat_bright1); + ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, dat_bright2); + ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, dat_bright3); + ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, dat_bright4); + ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, dat_bright5); + ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, dat_bright6); } - if (gam != sd->vold.gamma) { + if (cntr != sd->vold.contrast || gam != sd->vold.gamma) { + sd->vold.contrast = cntr; + if (cntr < 0 || cntr > sd->vmax.contrast) + cntr = 0; sd->vold.gamma = gam; if (gam < 0 || gam > sd->vmax.gamma) gam = 0; dat_multi1[2] = 0x6d; dat_multi3[2] = dat_multi1[2] + 1; - dat_multi4[2] = dat_multi2[2] = 0x40 + gam; + if (cntr == 0) + cntr = 4; + dat_multi4[2] = dat_multi2[2] = cntr * 0x10 + 2 - gam; ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, dat_multi1); ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, dat_multi2); ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, dat_multi3); @@ -878,14 +692,14 @@ static int mi2020_camera_settings(struct gspca_dev *gspca_dev) ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, dat_multi6); } - if (cntr != sd->vold.contrast) { - sd->vold.contrast = cntr; - if (cntr < 0 || cntr > sd->vmax.contrast) - cntr = 0; + if (backlight != sd->vold.backlight) { + sd->vold.backlight = backlight; + if (backlight < 0 || backlight > sd->vmax.backlight) + backlight = 0; - dat_multi1[2] = 0x6d; + dat_multi1[2] = 0x9d; dat_multi3[2] = dat_multi1[2] + 1; - dat_multi4[2] = dat_multi2[2] = 0x12 + 16 * cntr; + dat_multi4[2] = dat_multi2[2] = backlight; ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, dat_multi1); ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, dat_multi2); ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, dat_multi3); @@ -894,20 +708,6 @@ static int mi2020_camera_settings(struct gspca_dev *gspca_dev) ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, dat_multi6); } - if (bright != sd->vold.brightness) { - sd->vold.brightness = bright; - if (bright < 0 || bright > sd->vmax.brightness) - bright = 0; - - dat_bright2[2] = bright; - ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, dat_bright1); - ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, dat_bright2); - ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, dat_bright3); - ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, dat_bright4); - ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, dat_bright5); - ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, dat_bright6); - } - if (sharp != sd->vold.sharpness) { sd->vold.sharpness = sharp; if (sharp < 0 || sharp > sd->vmax.sharpness) @@ -928,9 +728,6 @@ static int mi2020_camera_settings(struct gspca_dev *gspca_dev) static void mi2020_post_unset_alt(struct gspca_dev *gspca_dev) { ctrl_out(gspca_dev, 0x40, 5, 0x0000, 0x0000, 0, NULL); - msleep(20); - if (_MI2020c_ || _MI2020_) - ctrl_out(gspca_dev, 0x40, 1, 0x0001, 0x0000, 0, NULL); - else - ctrl_out(gspca_dev, 0x40, 1, 0x0041, 0x0000, 0, NULL); + msleep(40); + ctrl_out(gspca_dev, 0x40, 1, 0x0001, 0x0000, 0, NULL); } diff --git a/drivers/media/video/gspca/gl860/gl860-ov9655.c b/drivers/media/video/gspca/gl860/gl860-ov9655.c index d412694c50a..5ae9619d72a 100644 --- a/drivers/media/video/gspca/gl860/gl860-ov9655.c +++ b/drivers/media/video/gspca/gl860/gl860-ov9655.c @@ -69,7 +69,7 @@ static u8 *tbl_640[] = { "\xd0\x01\xd1\x08\xd2\xe0\xd3\x01" "\xd4\x10\xd5\x80" }; -static u8 *tbl_800[] = { +static u8 *tbl_1280[] = { "\x00\x40\x07\x6a\x06\xf3\x0d\x6a" "\x10\x10\xc1\x01" , "\x12\x80\x00\x00\x01\x98\x02\x80" "\x03\x12\x04\x01\x0b\x57\x0e\x61" @@ -217,7 +217,7 @@ static int ov9655_init_post_alt(struct gspca_dev *gspca_dev) ctrl_out(gspca_dev, 0x40, 5, 0x0001, 0x0000, 0, NULL); - tbl = (reso == IMAGE_640) ? tbl_640 : tbl_800; + tbl = (reso == IMAGE_640) ? tbl_640 : tbl_1280; ctrl_out(gspca_dev, 0x40, 3, 0x0000, 0x0200, tbl_length[0], tbl[0]); diff --git a/drivers/media/video/gspca/gl860/gl860.c b/drivers/media/video/gspca/gl860/gl860.c index 9e42476c0ea..e86eb8b4aed 100644 --- a/drivers/media/video/gspca/gl860/gl860.c +++ b/drivers/media/video/gspca/gl860/gl860.c @@ -63,7 +63,7 @@ static int sd_set_##thename(struct gspca_dev *gspca_dev, s32 val)\ \ sd->vcur.thename = val;\ if (gspca_dev->streaming)\ - sd->dev_camera_settings(gspca_dev);\ + sd->waitSet = 1;\ return 0;\ } \ static int sd_get_##thename(struct gspca_dev *gspca_dev, s32 *val)\ @@ -91,7 +91,6 @@ SD_SETGET(contrast) /* control table */ static struct ctrl sd_ctrls_mi1320[GL860_NCTRLS]; static struct ctrl sd_ctrls_mi2020[GL860_NCTRLS]; -static struct ctrl sd_ctrls_mi2020b[GL860_NCTRLS]; static struct ctrl sd_ctrls_ov2640[GL860_NCTRLS]; static struct ctrl sd_ctrls_ov9655[GL860_NCTRLS]; @@ -121,8 +120,6 @@ static int gl860_build_control_table(struct gspca_dev *gspca_dev) sd_ctrls = sd_ctrls_mi1320; else if (_MI2020_) sd_ctrls = sd_ctrls_mi2020; - else if (_MI2020b_) - sd_ctrls = sd_ctrls_mi2020b; else if (_OV2640_) sd_ctrls = sd_ctrls_ov2640; else if (_OV9655_) @@ -187,19 +184,6 @@ static const struct sd_desc sd_desc_mi2020 = { .dq_callback = sd_callback, }; -static const struct sd_desc sd_desc_mi2020b = { - .name = MODULE_NAME, - .ctrls = sd_ctrls_mi2020b, - .nctrls = GL860_NCTRLS, - .config = sd_config, - .init = sd_init, - .isoc_init = sd_isoc_init, - .start = sd_start, - .stop0 = sd_stop0, - .pkt_scan = sd_pkt_scan, - .dq_callback = sd_callback, -}; - static const struct sd_desc sd_desc_ov2640 = { .name = MODULE_NAME, .ctrls = sd_ctrls_ov2640, @@ -235,9 +219,9 @@ static struct v4l2_pix_format mi2020_mode[] = { .colorspace = V4L2_COLORSPACE_SRGB, .priv = 0 }, - { 800, 600, V4L2_PIX_FMT_SGBRG8, V4L2_FIELD_NONE, + { 800, 598, V4L2_PIX_FMT_SGBRG8, V4L2_FIELD_NONE, .bytesperline = 800, - .sizeimage = 800 * 600, + .sizeimage = 800 * 598, .colorspace = V4L2_COLORSPACE_SRGB, .priv = 1 }, @@ -247,9 +231,9 @@ static struct v4l2_pix_format mi2020_mode[] = { .colorspace = V4L2_COLORSPACE_SRGB, .priv = 2 }, - {1600, 1200, V4L2_PIX_FMT_SGBRG8, V4L2_FIELD_NONE, + {1600, 1198, V4L2_PIX_FMT_SGBRG8, V4L2_FIELD_NONE, .bytesperline = 1600, - .sizeimage = 1600 * 1200, + .sizeimage = 1600 * 1198, .colorspace = V4L2_COLORSPACE_SRGB, .priv = 3 }, @@ -344,8 +328,6 @@ static int sd_config(struct gspca_dev *gspca_dev, sd->sensor = ID_OV9655; else if (strcmp(sensor, "MI2020") == 0) sd->sensor = ID_MI2020; - else if (strcmp(sensor, "MI2020b") == 0) - sd->sensor = ID_MI2020b; /* Get sensor and set the suitable init/start/../stop functions */ if (gl860_guess_sensor(gspca_dev, vendor_id, product_id) == -1) @@ -369,13 +351,6 @@ static int sd_config(struct gspca_dev *gspca_dev, dev_init_settings = mi2020_init_settings; break; - case ID_MI2020b: - gspca_dev->sd_desc = &sd_desc_mi2020b; - cam->cam_mode = mi2020_mode; - cam->nmodes = ARRAY_SIZE(mi2020_mode); - dev_init_settings = mi2020_init_settings; - break; - case ID_OV2640: gspca_dev->sd_desc = &sd_desc_ov2640; cam->cam_mode = ov2640_mode; @@ -620,10 +595,7 @@ int gl860_RTx(struct gspca_dev *gspca_dev, else if (len > 1 && r < len) PDEBUG(D_ERR, "short ctrl transfer %d/%d", r, len); - if ((_MI2020_ || _MI2020b_ || _MI2020c_) && (val || index)) - msleep(1); - if (_OV2640_) - msleep(1); + msleep(1); return r; } @@ -767,8 +739,6 @@ static int gl860_guess_sensor(struct gspca_dev *gspca_dev, PDEBUG(D_PROBE, "05e3:f191 sensor MI1320 (1.3M)"); } else if (_MI2020_) { PDEBUG(D_PROBE, "05e3:0503 sensor MI2020 (2.0M)"); - } else if (_MI2020b_) { - PDEBUG(D_PROBE, "05e3:0503 sensor MI2020 alt. driver (2.0M)"); } else if (_OV9655_) { PDEBUG(D_PROBE, "05e3:0503 sensor OV9655 (1.3M)"); } else if (_OV2640_) { diff --git a/drivers/media/video/gspca/gl860/gl860.h b/drivers/media/video/gspca/gl860/gl860.h index 305061ff838..49ad4acbf60 100644 --- a/drivers/media/video/gspca/gl860/gl860.h +++ b/drivers/media/video/gspca/gl860/gl860.h @@ -32,19 +32,16 @@ #define ID_OV2640 2 #define ID_OV9655 4 #define ID_MI2020 8 -#define ID_MI2020b 16 #define _MI1320_ (((struct sd *) gspca_dev)->sensor == ID_MI1320) #define _MI2020_ (((struct sd *) gspca_dev)->sensor == ID_MI2020) -#define _MI2020b_ (((struct sd *) gspca_dev)->sensor == ID_MI2020b) -#define _MI2020c_ 0 #define _OV2640_ (((struct sd *) gspca_dev)->sensor == ID_OV2640) #define _OV9655_ (((struct sd *) gspca_dev)->sensor == ID_OV9655) #define IMAGE_640 0 #define IMAGE_800 1 #define IMAGE_1280 2 -#define IMAGE_1600 3 +#define IMAGE_1600 3 struct sd_gl860 { u16 backlight; @@ -75,10 +72,10 @@ struct sd { int (*dev_camera_settings)(struct gspca_dev *); u8 swapRB; - u8 mirrorMask; - u8 sensor; - s32 nbIm; - s32 nbRightUp; + u8 mirrorMask; + u8 sensor; + s32 nbIm; + s32 nbRightUp; u8 waitSet; }; diff --git a/drivers/media/video/gspca/gspca.c b/drivers/media/video/gspca/gspca.c index 678675bb365..d951b0f0e05 100644 --- a/drivers/media/video/gspca/gspca.c +++ b/drivers/media/video/gspca/gspca.c @@ -201,7 +201,7 @@ static int alloc_and_submit_int_urb(struct gspca_dev *gspca_dev, buffer_len = le16_to_cpu(ep->wMaxPacketSize); interval = ep->bInterval; - PDEBUG(D_PROBE, "found int in endpoint: 0x%x, " + PDEBUG(D_CONF, "found int in endpoint: 0x%x, " "buffer_len=%u, interval=%u", ep->bEndpointAddress, buffer_len, interval); @@ -226,7 +226,7 @@ static int alloc_and_submit_int_urb(struct gspca_dev *gspca_dev, gspca_dev->int_urb = urb; ret = usb_submit_urb(urb, GFP_KERNEL); if (ret < 0) { - PDEBUG(D_ERR, "submit URB failed with error %i", ret); + PDEBUG(D_ERR, "submit int URB failed with error %i", ret); goto error_submit; } return ret; @@ -294,19 +294,6 @@ static inline int gspca_input_connect(struct gspca_dev *dev) } #endif -/* get the current input frame buffer */ -struct gspca_frame *gspca_get_i_frame(struct gspca_dev *gspca_dev) -{ - struct gspca_frame *frame; - - frame = gspca_dev->cur_frame; - if ((frame->v4l2_buf.flags & BUF_ALL_FLAGS) - != V4L2_BUF_FLAG_QUEUED) - return NULL; - return frame; -} -EXPORT_SYMBOL(gspca_get_i_frame); - /* * fill a video frame from an URB and resubmit */ @@ -439,20 +426,20 @@ void gspca_frame_add(struct gspca_dev *gspca_dev, PDEBUG(D_PACK, "add t:%d l:%d", packet_type, len); - /* check the availability of the frame buffer */ - frame = gspca_dev->cur_frame; - if ((frame->v4l2_buf.flags & BUF_ALL_FLAGS) - != V4L2_BUF_FLAG_QUEUED) { - gspca_dev->last_packet_type = DISCARD_PACKET; - return; - } - - /* when start of a new frame, if the current frame buffer - * is not queued, discard the whole frame */ if (packet_type == FIRST_PACKET) { - frame->data_end = frame->data; + i = atomic_read(&gspca_dev->fr_i); + + /* if there are no queued buffer, discard the whole frame */ + if (i == atomic_read(&gspca_dev->fr_q)) { + gspca_dev->last_packet_type = DISCARD_PACKET; + return; + } + j = gspca_dev->fr_queue[i]; + frame = &gspca_dev->frame[j]; frame->v4l2_buf.timestamp = ktime_to_timeval(ktime_get()); frame->v4l2_buf.sequence = ++gspca_dev->sequence; + gspca_dev->image = frame->data; + gspca_dev->image_len = 0; } else if (gspca_dev->last_packet_type == DISCARD_PACKET) { if (packet_type == LAST_PACKET) gspca_dev->last_packet_type = packet_type; @@ -461,34 +448,37 @@ void gspca_frame_add(struct gspca_dev *gspca_dev, /* append the packet to the frame buffer */ if (len > 0) { - if (frame->data_end - frame->data + len - > frame->v4l2_buf.length) { - PDEBUG(D_ERR|D_PACK, "frame overflow %zd > %d", - frame->data_end - frame->data + len, - frame->v4l2_buf.length); + if (gspca_dev->image_len + len > gspca_dev->frsz) { + PDEBUG(D_ERR|D_PACK, "frame overflow %d > %d", + gspca_dev->image_len + len, + gspca_dev->frsz); packet_type = DISCARD_PACKET; } else { - memcpy(frame->data_end, data, len); - frame->data_end += len; + memcpy(gspca_dev->image + gspca_dev->image_len, + data, len); + gspca_dev->image_len += len; } } gspca_dev->last_packet_type = packet_type; - /* if last packet, wake up the application and advance in the queue */ + /* if last packet, invalidate packet concatenation until + * next first packet, wake up the application and advance + * in the queue */ if (packet_type == LAST_PACKET) { - frame->v4l2_buf.bytesused = frame->data_end - frame->data; - frame->v4l2_buf.flags &= ~V4L2_BUF_FLAG_QUEUED; - frame->v4l2_buf.flags |= V4L2_BUF_FLAG_DONE; - wake_up_interruptible(&gspca_dev->wq); /* event = new frame */ - i = (gspca_dev->fr_i + 1) % gspca_dev->nframes; - gspca_dev->fr_i = i; - PDEBUG(D_FRAM, "frame complete len:%d q:%d i:%d o:%d", - frame->v4l2_buf.bytesused, - gspca_dev->fr_q, - i, - gspca_dev->fr_o); + i = atomic_read(&gspca_dev->fr_i); j = gspca_dev->fr_queue[i]; - gspca_dev->cur_frame = &gspca_dev->frame[j]; + frame = &gspca_dev->frame[j]; + frame->v4l2_buf.bytesused = gspca_dev->image_len; + frame->v4l2_buf.flags = (frame->v4l2_buf.flags + | V4L2_BUF_FLAG_DONE) + & ~V4L2_BUF_FLAG_QUEUED; + i = (i + 1) % GSPCA_MAX_FRAMES; + atomic_set(&gspca_dev->fr_i, i); + wake_up_interruptible(&gspca_dev->wq); /* event = new frame */ + PDEBUG(D_FRAM, "frame complete len:%d", + frame->v4l2_buf.bytesused); + gspca_dev->image = NULL; + gspca_dev->image_len = 0; } } EXPORT_SYMBOL(gspca_frame_add); @@ -506,36 +496,6 @@ static int gspca_is_compressed(__u32 format) return 0; } -static void *rvmalloc(long size) -{ - void *mem; - unsigned long adr; - - mem = vmalloc_32(size); - if (mem != NULL) { - adr = (unsigned long) mem; - while (size > 0) { - SetPageReserved(vmalloc_to_page((void *) adr)); - adr += PAGE_SIZE; - size -= PAGE_SIZE; - } - } - return mem; -} - -static void rvfree(void *mem, long size) -{ - unsigned long adr; - - adr = (unsigned long) mem; - while (size > 0) { - ClearPageReserved(vmalloc_to_page((void *) adr)); - adr += PAGE_SIZE; - size -= PAGE_SIZE; - } - vfree(mem); -} - static int frame_alloc(struct gspca_dev *gspca_dev, unsigned int count) { @@ -548,9 +508,9 @@ static int frame_alloc(struct gspca_dev *gspca_dev, PDEBUG(D_STREAM, "frame alloc frsz: %d", frsz); frsz = PAGE_ALIGN(frsz); gspca_dev->frsz = frsz; - if (count > GSPCA_MAX_FRAMES) - count = GSPCA_MAX_FRAMES; - gspca_dev->frbuf = rvmalloc(frsz * count); + if (count >= GSPCA_MAX_FRAMES) + count = GSPCA_MAX_FRAMES - 1; + gspca_dev->frbuf = vmalloc_32(frsz * count); if (!gspca_dev->frbuf) { err("frame alloc failed"); return -ENOMEM; @@ -565,14 +525,12 @@ static int frame_alloc(struct gspca_dev *gspca_dev, frame->v4l2_buf.length = frsz; frame->v4l2_buf.memory = gspca_dev->memory; frame->v4l2_buf.sequence = 0; - frame->data = frame->data_end = - gspca_dev->frbuf + i * frsz; + frame->data = gspca_dev->frbuf + i * frsz; frame->v4l2_buf.m.offset = i * frsz; } - gspca_dev->fr_i = gspca_dev->fr_o = gspca_dev->fr_q = 0; - gspca_dev->cur_frame = &gspca_dev->frame[0]; - gspca_dev->last_packet_type = DISCARD_PACKET; - gspca_dev->sequence = 0; + atomic_set(&gspca_dev->fr_q, 0); + atomic_set(&gspca_dev->fr_i, 0); + gspca_dev->fr_o = 0; return 0; } @@ -582,8 +540,7 @@ static void frame_free(struct gspca_dev *gspca_dev) PDEBUG(D_STREAM, "frame free"); if (gspca_dev->frbuf != NULL) { - rvfree(gspca_dev->frbuf, - gspca_dev->nframes * gspca_dev->frsz); + vfree(gspca_dev->frbuf); gspca_dev->frbuf = NULL; for (i = 0; i < gspca_dev->nframes; i++) gspca_dev->frame[i].data = NULL; @@ -683,12 +640,16 @@ static struct usb_host_endpoint *get_ep(struct gspca_dev *gspca_dev) : USB_ENDPOINT_XFER_ISOC; i = gspca_dev->alt; /* previous alt setting */ if (gspca_dev->cam.reverse_alts) { + if (gspca_dev->audio) + i++; while (++i < gspca_dev->nbalt) { ep = alt_xfer(&intf->altsetting[i], xfer); if (ep) break; } } else { + if (gspca_dev->audio) + i--; while (--i >= 0) { ep = alt_xfer(&intf->altsetting[i], xfer); if (ep) @@ -811,6 +772,12 @@ static int gspca_init_transfer(struct gspca_dev *gspca_dev) goto out; } + /* reset the streaming variables */ + gspca_dev->image = NULL; + gspca_dev->image_len = 0; + gspca_dev->last_packet_type = DISCARD_PACKET; + gspca_dev->sequence = 0; + gspca_dev->usb_err = 0; /* set the higher alternate setting and @@ -1433,34 +1400,6 @@ static int vidioc_g_ctrl(struct file *file, void *priv, return ret; } -/*fixme: have an audio flag in gspca_dev?*/ -static int vidioc_s_audio(struct file *file, void *priv, - struct v4l2_audio *audio) -{ - if (audio->index != 0) - return -EINVAL; - return 0; -} - -static int vidioc_g_audio(struct file *file, void *priv, - struct v4l2_audio *audio) -{ - strcpy(audio->name, "Microphone"); - return 0; -} - -static int vidioc_enumaudio(struct file *file, void *priv, - struct v4l2_audio *audio) -{ - if (audio->index != 0) - return -EINVAL; - - strcpy(audio->name, "Microphone"); - audio->capability = 0; - audio->mode = 0; - return 0; -} - static int vidioc_querymenu(struct file *file, void *priv, struct v4l2_querymenu *qmenu) { @@ -1504,7 +1443,8 @@ static int vidioc_reqbufs(struct file *file, void *priv, struct gspca_dev *gspca_dev = priv; int i, ret = 0, streaming; - switch (rb->memory) { + i = rb->memory; /* (avoid compilation warning) */ + switch (i) { case GSPCA_MEMORY_READ: /* (internal call) */ case V4L2_MEMORY_MMAP: case V4L2_MEMORY_USERPTR: @@ -1626,7 +1566,7 @@ static int vidioc_streamoff(struct file *file, void *priv, enum v4l2_buf_type buf_type) { struct gspca_dev *gspca_dev = priv; - int i, ret; + int ret; if (buf_type != V4L2_BUF_TYPE_VIDEO_CAPTURE) return -EINVAL; @@ -1650,12 +1590,10 @@ static int vidioc_streamoff(struct file *file, void *priv, gspca_stream_off(gspca_dev); mutex_unlock(&gspca_dev->usb_lock); - /* empty the application queues */ - for (i = 0; i < gspca_dev->nframes; i++) - gspca_dev->frame[i].v4l2_buf.flags &= ~BUF_ALL_FLAGS; - gspca_dev->fr_i = gspca_dev->fr_o = gspca_dev->fr_q = 0; - gspca_dev->last_packet_type = DISCARD_PACKET; - gspca_dev->sequence = 0; + /* empty the transfer queues */ + atomic_set(&gspca_dev->fr_q, 0); + atomic_set(&gspca_dev->fr_i, 0); + gspca_dev->fr_o = 0; ret = 0; out: mutex_unlock(&gspca_dev->queue_lock); @@ -1732,7 +1670,7 @@ static int vidioc_s_parm(struct file *filp, void *priv, int n; n = parm->parm.capture.readbuffers; - if (n == 0 || n > GSPCA_MAX_FRAMES) + if (n == 0 || n >= GSPCA_MAX_FRAMES) parm->parm.capture.readbuffers = gspca_dev->nbufread; else gspca_dev->nbufread = n; @@ -1755,49 +1693,6 @@ static int vidioc_s_parm(struct file *filp, void *priv, return 0; } -#ifdef CONFIG_VIDEO_V4L1_COMPAT -static int vidiocgmbuf(struct file *file, void *priv, - struct video_mbuf *mbuf) -{ - struct gspca_dev *gspca_dev = file->private_data; - int i; - - PDEBUG(D_STREAM, "cgmbuf"); - if (gspca_dev->nframes == 0) { - int ret; - - { - struct v4l2_format fmt; - - fmt.type = V4L2_BUF_TYPE_VIDEO_CAPTURE; - i = gspca_dev->cam.nmodes - 1; /* highest mode */ - fmt.fmt.pix.width = gspca_dev->cam.cam_mode[i].width; - fmt.fmt.pix.height = gspca_dev->cam.cam_mode[i].height; - fmt.fmt.pix.pixelformat = V4L2_PIX_FMT_BGR24; - ret = vidioc_s_fmt_vid_cap(file, priv, &fmt); - if (ret != 0) - return ret; - } - { - struct v4l2_requestbuffers rb; - - memset(&rb, 0, sizeof rb); - rb.count = 4; - rb.type = V4L2_BUF_TYPE_VIDEO_CAPTURE; - rb.memory = V4L2_MEMORY_MMAP; - ret = vidioc_reqbufs(file, priv, &rb); - if (ret != 0) - return ret; - } - } - mbuf->frames = gspca_dev->nframes; - mbuf->size = gspca_dev->frsz * gspca_dev->nframes; - for (i = 0; i < mbuf->frames; i++) - mbuf->offsets[i] = gspca_dev->frame[i].v4l2_buf.m.offset; - return 0; -} -#endif - static int dev_mmap(struct file *file, struct vm_area_struct *vma) { struct gspca_dev *gspca_dev = file->private_data; @@ -1838,12 +1733,7 @@ static int dev_mmap(struct file *file, struct vm_area_struct *vma) ret = -EINVAL; goto out; } -#ifdef CONFIG_VIDEO_V4L1_COMPAT - /* v4l1 maps all the buffers */ - if (i != 0 - || size != frame->v4l2_buf.length * gspca_dev->nframes) -#endif - if (size != frame->v4l2_buf.length) { + if (size != frame->v4l2_buf.length) { PDEBUG(D_STREAM, "mmap bad size"); ret = -EINVAL; goto out; @@ -1883,21 +1773,17 @@ out: static int frame_wait(struct gspca_dev *gspca_dev, int nonblock_ing) { - struct gspca_frame *frame; - int i, j, ret; + int i, ret; /* check if a frame is ready */ i = gspca_dev->fr_o; - j = gspca_dev->fr_queue[i]; - frame = &gspca_dev->frame[j]; - - if (!(frame->v4l2_buf.flags & V4L2_BUF_FLAG_DONE)) { + if (i == atomic_read(&gspca_dev->fr_i)) { if (nonblock_ing) return -EAGAIN; /* wait till a frame is ready */ ret = wait_event_interruptible_timeout(gspca_dev->wq, - (frame->v4l2_buf.flags & V4L2_BUF_FLAG_DONE) || + i != atomic_read(&gspca_dev->fr_i) || !gspca_dev->streaming || !gspca_dev->present, msecs_to_jiffies(3000)); if (ret < 0) @@ -1906,11 +1792,7 @@ static int frame_wait(struct gspca_dev *gspca_dev, return -EIO; } - gspca_dev->fr_o = (i + 1) % gspca_dev->nframes; - PDEBUG(D_FRAM, "frame wait q:%d i:%d o:%d", - gspca_dev->fr_q, - gspca_dev->fr_i, - gspca_dev->fr_o); + gspca_dev->fr_o = (i + 1) % GSPCA_MAX_FRAMES; if (gspca_dev->sd_desc->dq_callback) { mutex_lock(&gspca_dev->usb_lock); @@ -1919,7 +1801,7 @@ static int frame_wait(struct gspca_dev *gspca_dev, gspca_dev->sd_desc->dq_callback(gspca_dev); mutex_unlock(&gspca_dev->usb_lock); } - return j; + return gspca_dev->fr_queue[i]; } /* @@ -2024,15 +1906,9 @@ static int vidioc_qbuf(struct file *file, void *priv, } /* put the buffer in the 'queued' queue */ - i = gspca_dev->fr_q; + i = atomic_read(&gspca_dev->fr_q); gspca_dev->fr_queue[i] = index; - if (gspca_dev->fr_i == i) - gspca_dev->cur_frame = frame; - gspca_dev->fr_q = (i + 1) % gspca_dev->nframes; - PDEBUG(D_FRAM, "qbuf q:%d i:%d o:%d", - gspca_dev->fr_q, - gspca_dev->fr_i, - gspca_dev->fr_o); + atomic_set(&gspca_dev->fr_q, (i + 1) % GSPCA_MAX_FRAMES); v4l2_buf->flags |= V4L2_BUF_FLAG_QUEUED; v4l2_buf->flags &= ~V4L2_BUF_FLAG_DONE; @@ -2088,7 +1964,7 @@ static int read_alloc(struct gspca_dev *gspca_dev, static unsigned int dev_poll(struct file *file, poll_table *wait) { struct gspca_dev *gspca_dev = file->private_data; - int i, ret; + int ret; PDEBUG(D_FRAM, "poll"); @@ -2106,11 +1982,9 @@ static unsigned int dev_poll(struct file *file, poll_table *wait) if (mutex_lock_interruptible(&gspca_dev->queue_lock) != 0) return POLLERR; - /* check the next incoming buffer */ - i = gspca_dev->fr_o; - i = gspca_dev->fr_queue[i]; - if (gspca_dev->frame[i].v4l2_buf.flags & V4L2_BUF_FLAG_DONE) - ret = POLLIN | POLLRDNORM; /* something to read */ + /* check if an image has been received */ + if (gspca_dev->fr_o != atomic_read(&gspca_dev->fr_i)) + ret = POLLIN | POLLRDNORM; /* yes */ else ret = 0; mutex_unlock(&gspca_dev->queue_lock); @@ -2214,9 +2088,6 @@ static const struct v4l2_ioctl_ops dev_ioctl_ops = { .vidioc_queryctrl = vidioc_queryctrl, .vidioc_g_ctrl = vidioc_g_ctrl, .vidioc_s_ctrl = vidioc_s_ctrl, - .vidioc_g_audio = vidioc_g_audio, - .vidioc_s_audio = vidioc_s_audio, - .vidioc_enumaudio = vidioc_enumaudio, .vidioc_querymenu = vidioc_querymenu, .vidioc_enum_input = vidioc_enum_input, .vidioc_g_input = vidioc_g_input, @@ -2235,9 +2106,6 @@ static const struct v4l2_ioctl_ops dev_ioctl_ops = { .vidioc_s_register = vidioc_s_register, #endif .vidioc_g_chip_ident = vidioc_g_chip_ident, -#ifdef CONFIG_VIDEO_V4L1_COMPAT - .vidiocgmbuf = vidiocgmbuf, -#endif }; static struct video_device gspca_template = { @@ -2253,31 +2121,18 @@ static struct video_device gspca_template = { * This function must be called by the sub-driver when it is * called for probing a new device. */ -int gspca_dev_probe(struct usb_interface *intf, +int gspca_dev_probe2(struct usb_interface *intf, const struct usb_device_id *id, const struct sd_desc *sd_desc, int dev_size, struct module *module) { - struct usb_interface_descriptor *interface; struct gspca_dev *gspca_dev; struct usb_device *dev = interface_to_usbdev(intf); int ret; PDEBUG(D_PROBE, "probing %04x:%04x", id->idVendor, id->idProduct); - /* we don't handle multi-config cameras */ - if (dev->descriptor.bNumConfigurations != 1) { - PDEBUG(D_ERR, "Too many config"); - return -ENODEV; - } - - /* the USB video interface must be the first one */ - interface = &intf->cur_altsetting->desc; - if (dev->config->desc.bNumInterfaces != 1 && - interface->bInterfaceNumber != 0) - return -ENODEV; - /* create the device */ if (dev_size < sizeof *gspca_dev) dev_size = sizeof *gspca_dev; @@ -2293,8 +2148,26 @@ int gspca_dev_probe(struct usb_interface *intf, goto out; } gspca_dev->dev = dev; - gspca_dev->iface = interface->bInterfaceNumber; + gspca_dev->iface = intf->cur_altsetting->desc.bInterfaceNumber; gspca_dev->nbalt = intf->num_altsetting; + + /* check if any audio device */ + if (dev->config->desc.bNumInterfaces != 1) { + int i; + struct usb_interface *intf2; + + for (i = 0; i < dev->config->desc.bNumInterfaces; i++) { + intf2 = dev->config->interface[i]; + if (intf2 != NULL + && intf2->altsetting != NULL + && intf2->altsetting->desc.bInterfaceClass == + USB_CLASS_AUDIO) { + gspca_dev->audio = 1; + break; + } + } + } + gspca_dev->sd_desc = sd_desc; gspca_dev->nbufread = 2; gspca_dev->empty_packet = -1; /* don't check the empty packets */ @@ -2345,6 +2218,31 @@ out: kfree(gspca_dev); return ret; } +EXPORT_SYMBOL(gspca_dev_probe2); + +/* same function as the previous one, but check the interface */ +int gspca_dev_probe(struct usb_interface *intf, + const struct usb_device_id *id, + const struct sd_desc *sd_desc, + int dev_size, + struct module *module) +{ + struct usb_device *dev = interface_to_usbdev(intf); + + /* we don't handle multi-config cameras */ + if (dev->descriptor.bNumConfigurations != 1) { + PDEBUG(D_ERR, "%04x:%04x too many config", + id->idVendor, id->idProduct); + return -ENODEV; + } + + /* the USB video interface must be the first one */ + if (dev->config->desc.bNumInterfaces != 1 + && intf->cur_altsetting->desc.bInterfaceNumber != 0) + return -ENODEV; + + return gspca_dev_probe2(intf, id, sd_desc, dev_size, module); +} EXPORT_SYMBOL(gspca_dev_probe); /* diff --git a/drivers/media/video/gspca/gspca.h b/drivers/media/video/gspca/gspca.h index 8b963dfae86..b749c36d9f7 100644 --- a/drivers/media/video/gspca/gspca.h +++ b/drivers/media/video/gspca/gspca.h @@ -7,7 +7,6 @@ #include <linux/videodev2.h> #include <media/v4l2-common.h> #include <linux/mutex.h> -#include <linux/slab.h> /* compilation option */ #define GSPCA_DEBUG 1 @@ -148,7 +147,6 @@ enum gspca_packet_type { struct gspca_frame { __u8 *data; /* frame buffer */ - __u8 *data_end; /* end of frame while filling */ int vma_use_count; struct v4l2_buffer v4l2_buf; }; @@ -177,13 +175,14 @@ struct gspca_dev { __u8 *frbuf; /* buffer for nframes */ struct gspca_frame frame[GSPCA_MAX_FRAMES]; - struct gspca_frame *cur_frame; /* frame beeing filled */ + u8 *image; /* image beeing filled */ __u32 frsz; /* frame size */ - char nframes; /* number of frames */ - char fr_i; /* frame being filled */ - char fr_q; /* next frame to queue */ - char fr_o; /* next frame to dequeue */ + u32 image_len; /* current length of image */ + atomic_t fr_q; /* next frame to queue */ + atomic_t fr_i; /* frame being filled */ signed char fr_queue[GSPCA_MAX_FRAMES]; /* frame queue */ + char nframes; /* number of frames */ + u8 fr_o; /* next frame to dequeue */ __u8 last_packet_type; __s8 empty_packet; /* if (-1) don't check empty packets */ __u8 streaming; @@ -199,6 +198,7 @@ struct gspca_dev { struct mutex read_lock; /* read protection */ struct mutex queue_lock; /* ISOC queue protection */ int usb_err; /* USB error - protected by usb_lock */ + u16 pkt_size; /* ISOC packet size */ #ifdef CONFIG_PM char frozen; /* suspend - resume */ #endif @@ -209,7 +209,7 @@ struct gspca_dev { __u8 iface; /* USB interface number */ __u8 alt; /* USB alternate setting */ __u8 nbalt; /* number of USB alternate settings */ - u16 pkt_size; /* ISOC packet size */ + u8 audio; /* presence of audio device */ }; int gspca_dev_probe(struct usb_interface *intf, @@ -217,12 +217,16 @@ int gspca_dev_probe(struct usb_interface *intf, const struct sd_desc *sd_desc, int dev_size, struct module *module); +int gspca_dev_probe2(struct usb_interface *intf, + const struct usb_device_id *id, + const struct sd_desc *sd_desc, + int dev_size, + struct module *module); void gspca_disconnect(struct usb_interface *intf); void gspca_frame_add(struct gspca_dev *gspca_dev, enum gspca_packet_type packet_type, const u8 *data, int len); -struct gspca_frame *gspca_get_i_frame(struct gspca_dev *gspca_dev); #ifdef CONFIG_PM int gspca_suspend(struct usb_interface *intf, pm_message_t message); int gspca_resume(struct usb_interface *intf); diff --git a/drivers/media/video/gspca/jeilinj.c b/drivers/media/video/gspca/jeilinj.c index 84ecd56c647..12d9cf4caba 100644 --- a/drivers/media/video/gspca/jeilinj.c +++ b/drivers/media/video/gspca/jeilinj.c @@ -50,7 +50,7 @@ struct sd { struct workqueue_struct *work_thread; u8 quality; /* image quality */ u8 jpegqual; /* webcam quality */ - u8 *jpeg_hdr; + u8 jpeg_hdr[JPEG_HDR_SZ]; }; struct jlj_command { @@ -282,7 +282,6 @@ static void sd_stop0(struct gspca_dev *gspca_dev) destroy_workqueue(dev->work_thread); dev->work_thread = NULL; mutex_lock(&gspca_dev->usb_lock); - kfree(dev->jpeg_hdr); } /* this function is called at probe and resume time */ @@ -298,9 +297,6 @@ static int sd_start(struct gspca_dev *gspca_dev) int ret; /* create the JPEG header */ - dev->jpeg_hdr = kmalloc(JPEG_HDR_SZ, GFP_KERNEL); - if (dev->jpeg_hdr == NULL) - return -ENOMEM; jpeg_define(dev->jpeg_hdr, gspca_dev->height, gspca_dev->width, 0x21); /* JPEG 422 */ jpeg_set_qual(dev->jpeg_hdr, dev->quality); diff --git a/drivers/media/video/gspca/m5602/m5602_bridge.h b/drivers/media/video/gspca/m5602/m5602_bridge.h index 1127a405c9b..51af3ee3ab8 100644 --- a/drivers/media/video/gspca/m5602/m5602_bridge.h +++ b/drivers/media/video/gspca/m5602/m5602_bridge.h @@ -19,6 +19,7 @@ #ifndef M5602_BRIDGE_H_ #define M5602_BRIDGE_H_ +#include <linux/slab.h> #include "gspca.h" #define MODULE_NAME "ALi m5602" diff --git a/drivers/media/video/gspca/m5602/m5602_core.c b/drivers/media/video/gspca/m5602/m5602_core.c index 4294c75e3b1..b073d66acd0 100644 --- a/drivers/media/video/gspca/m5602/m5602_core.c +++ b/drivers/media/video/gspca/m5602/m5602_core.c @@ -305,30 +305,23 @@ static void m5602_urb_complete(struct gspca_dev *gspca_dev, sd->frame_count); } else { - struct gspca_frame *frame; int cur_frame_len; - frame = gspca_get_i_frame(gspca_dev); - if (frame == NULL) { - gspca_dev->last_packet_type = DISCARD_PACKET; - return; - } - - cur_frame_len = frame->data_end - frame->data; + cur_frame_len = gspca_dev->image_len; /* Remove urb header */ data += 4; len -= 4; - if (cur_frame_len + len <= frame->v4l2_buf.length) { + if (cur_frame_len + len <= gspca_dev->frsz) { PDEBUG(D_FRAM, "Continuing frame %d copying %d bytes", sd->frame_count, len); gspca_frame_add(gspca_dev, INTER_PACKET, data, len); - } else if (frame->v4l2_buf.length - cur_frame_len > 0) { + } else { /* Add the remaining data up to frame size */ gspca_frame_add(gspca_dev, INTER_PACKET, data, - frame->v4l2_buf.length - cur_frame_len); + gspca_dev->frsz - cur_frame_len); } } } diff --git a/drivers/media/video/gspca/m5602/m5602_s5k83a.c b/drivers/media/video/gspca/m5602/m5602_s5k83a.c index 6b3be4fa2c0..fbd91545497 100644 --- a/drivers/media/video/gspca/m5602/m5602_s5k83a.c +++ b/drivers/media/video/gspca/m5602/m5602_s5k83a.c @@ -17,7 +17,6 @@ */ #include <linux/kthread.h> -#include <linux/slab.h> #include "m5602_s5k83a.h" static int s5k83a_set_gain(struct gspca_dev *gspca_dev, __s32 val); diff --git a/drivers/media/video/gspca/mars.c b/drivers/media/video/gspca/mars.c index 3d9229e22b2..031f7195ce0 100644 --- a/drivers/media/video/gspca/mars.c +++ b/drivers/media/video/gspca/mars.c @@ -41,7 +41,7 @@ struct sd { #define QUALITY_MAX 70 #define QUALITY_DEF 50 - u8 *jpeg_hdr; + u8 jpeg_hdr[JPEG_HDR_SZ]; }; /* V4L2 controls supported by the driver */ @@ -200,9 +200,6 @@ static int sd_start(struct gspca_dev *gspca_dev) int i; /* create the JPEG header */ - sd->jpeg_hdr = kmalloc(JPEG_HDR_SZ, GFP_KERNEL); - if (!sd->jpeg_hdr) - return -ENOMEM; jpeg_define(sd->jpeg_hdr, gspca_dev->height, gspca_dev->width, 0x21); /* JPEG 422 */ jpeg_set_qual(sd->jpeg_hdr, sd->quality); @@ -317,13 +314,6 @@ static void sd_stopN(struct gspca_dev *gspca_dev) PDEBUG(D_ERR, "Camera Stop failed"); } -static void sd_stop0(struct gspca_dev *gspca_dev) -{ - struct sd *sd = (struct sd *) gspca_dev; - - kfree(sd->jpeg_hdr); -} - static void sd_pkt_scan(struct gspca_dev *gspca_dev, u8 *data, /* isoc packet */ int len) /* iso packet length */ @@ -486,7 +476,6 @@ static const struct sd_desc sd_desc = { .init = sd_init, .start = sd_start, .stopN = sd_stopN, - .stop0 = sd_stop0, .pkt_scan = sd_pkt_scan, .get_jcomp = sd_get_jcomp, .set_jcomp = sd_set_jcomp, diff --git a/drivers/media/video/gspca/ov519.c b/drivers/media/video/gspca/ov519.c index f36e11a0458..2b2cbdbf03f 100644 --- a/drivers/media/video/gspca/ov519.c +++ b/drivers/media/video/gspca/ov519.c @@ -41,6 +41,11 @@ #include <linux/input.h> #include "gspca.h" +/* The jpeg_hdr is used by w996Xcf only */ +/* The CONEX_CAM define for jpeg.h needs renaming, now its used here too */ +#define CONEX_CAM +#include "jpeg.h" + MODULE_AUTHOR("Jean-Francois Moine <http://moinejf.free.fr>"); MODULE_DESCRIPTION("OV519 USB Camera Driver"); MODULE_LICENSE("GPL"); @@ -90,6 +95,7 @@ struct sd { #define QUALITY_DEF 50 __u8 stopped; /* Streaming is temporarily paused */ + __u8 first_frame; __u8 frame_rate; /* current Framerate */ __u8 clockdiv; /* clockdiv override */ @@ -115,7 +121,7 @@ struct sd { int sensor_height; int sensor_reg_cache[256]; - u8 *jpeg_hdr; + u8 jpeg_hdr[JPEG_HDR_SZ]; }; /* Note this is a bit of a hack, but the w9968cf driver needs the code for all @@ -3147,7 +3153,7 @@ static int sd_config(struct gspca_dev *gspca_dev, sd->autobrightness = AUTOBRIGHT_DEF; if (sd->sensor == SEN_OV7670) { sd->freq = OV7670_FREQ_DEF; - gspca_dev->ctrl_dis = 1 << FREQ_IDX; + gspca_dev->ctrl_dis = (1 << FREQ_IDX) | (1 << COLOR_IDX); } else { sd->freq = FREQ_DEF; gspca_dev->ctrl_dis = (1 << HFLIP_IDX) | (1 << VFLIP_IDX) | @@ -3961,6 +3967,8 @@ static int sd_start(struct gspca_dev *gspca_dev) sd_reset_snapshot(gspca_dev); sd->snapshot_pressed = 0; + sd->first_frame = 3; + ret = ov51x_restart(sd); if (ret < 0) goto out; @@ -4153,13 +4161,23 @@ static void ovfx2_pkt_scan(struct gspca_dev *gspca_dev, u8 *data, /* isoc packet */ int len) /* iso packet length */ { + struct sd *sd = (struct sd *) gspca_dev; + + gspca_frame_add(gspca_dev, INTER_PACKET, data, len); + /* A short read signals EOF */ if (len < OVFX2_BULK_SIZE) { - gspca_frame_add(gspca_dev, LAST_PACKET, data, len); + /* If the frame is short, and it is one of the first ones + the sensor and bridge are still syncing, so drop it. */ + if (sd->first_frame) { + sd->first_frame--; + if (gspca_dev->image_len < + sd->gspca_dev.width * sd->gspca_dev.height) + gspca_dev->last_packet_type = DISCARD_PACKET; + } + gspca_frame_add(gspca_dev, LAST_PACKET, NULL, 0); gspca_frame_add(gspca_dev, FIRST_PACKET, NULL, 0); - return; } - gspca_frame_add(gspca_dev, INTER_PACKET, data, len); } static void sd_pkt_scan(struct gspca_dev *gspca_dev, diff --git a/drivers/media/video/gspca/ov534.c b/drivers/media/video/gspca/ov534.c index dc1e4efe30f..96cb3a97658 100644 --- a/drivers/media/video/gspca/ov534.c +++ b/drivers/media/video/gspca/ov534.c @@ -987,13 +987,8 @@ static void sd_pkt_scan(struct gspca_dev *gspca_dev, data + 12, len - 12); /* If this packet is marked as EOF, end the frame */ } else if (data[1] & UVC_STREAM_EOF) { - struct gspca_frame *frame; - sd->last_pts = 0; - frame = gspca_get_i_frame(gspca_dev); - if (frame == NULL) - goto discard; - if (frame->data_end - frame->data + (len - 12) != + if (gspca_dev->image_len + len - 12 != gspca_dev->width * gspca_dev->height * 2) { PDEBUG(D_PACK, "wrong sized frame"); goto discard; diff --git a/drivers/media/video/gspca/pac7302.c b/drivers/media/video/gspca/pac7302.c index 2a68220d1ad..a66df07d762 100644 --- a/drivers/media/video/gspca/pac7302.c +++ b/drivers/media/video/gspca/pac7302.c @@ -402,7 +402,7 @@ static void reg_w_buf(struct gspca_dev *gspca_dev, memcpy(gspca_dev->usb_buf, buffer, len); ret = usb_control_msg(gspca_dev->dev, usb_sndctrlpipe(gspca_dev->dev, 0), - 1, /* request */ + 0, /* request */ USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE, 0, /* value */ index, gspca_dev->usb_buf, len, @@ -804,7 +804,6 @@ static const unsigned char pac_jpeg_header2[] = { }; static void pac_start_frame(struct gspca_dev *gspca_dev, - struct gspca_frame *frame, __u16 lines, __u16 samples_per_line) { unsigned char tmpbuf[4]; @@ -829,19 +828,13 @@ static void sd_pkt_scan(struct gspca_dev *gspca_dev, int len) /* iso packet length */ { struct sd *sd = (struct sd *) gspca_dev; - struct gspca_frame *frame; + u8 *image; unsigned char *sof; sof = pac_find_sof(&sd->sof_read, data, len); if (sof) { int n, lum_offset, footer_length; - frame = gspca_get_i_frame(gspca_dev); - if (frame == NULL) { - gspca_dev->last_packet_type = DISCARD_PACKET; - return; - } - /* 6 bytes after the FF D9 EOF marker a number of lumination bytes are send corresponding to different parts of the image, the 14th and 15th byte after the EOF seem to @@ -852,16 +845,17 @@ static void sd_pkt_scan(struct gspca_dev *gspca_dev, /* Finish decoding current frame */ n = (sof - data) - (footer_length + sizeof pac_sof_marker); if (n < 0) { - frame->data_end += n; + gspca_dev->image_len += n; n = 0; + } else { + gspca_frame_add(gspca_dev, INTER_PACKET, data, n); } - gspca_frame_add(gspca_dev, INTER_PACKET, - data, n); - if (gspca_dev->last_packet_type != DISCARD_PACKET && - frame->data_end[-2] == 0xff && - frame->data_end[-1] == 0xd9) - gspca_frame_add(gspca_dev, LAST_PACKET, - NULL, 0); + + image = gspca_dev->image; + if (image != NULL + && image[gspca_dev->image_len - 2] == 0xff + && image[gspca_dev->image_len - 1] == 0xd9) + gspca_frame_add(gspca_dev, LAST_PACKET, NULL, 0); n = sof - data; len -= n; @@ -877,7 +871,7 @@ static void sd_pkt_scan(struct gspca_dev *gspca_dev, /* Start the new frame with the jpeg header */ /* The PAC7302 has the image rotated 90 degrees */ - pac_start_frame(gspca_dev, frame, + pac_start_frame(gspca_dev, gspca_dev->width, gspca_dev->height); } gspca_frame_add(gspca_dev, INTER_PACKET, data, len); @@ -1200,6 +1194,7 @@ static const struct usb_device_id device_table[] __devinitconst = { {USB_DEVICE(0x093a, 0x2621)}, {USB_DEVICE(0x093a, 0x2622), .driver_info = FL_VFLIP}, {USB_DEVICE(0x093a, 0x2624), .driver_info = FL_VFLIP}, + {USB_DEVICE(0x093a, 0x2625)}, {USB_DEVICE(0x093a, 0x2626)}, {USB_DEVICE(0x093a, 0x2628)}, {USB_DEVICE(0x093a, 0x2629), .driver_info = FL_VFLIP}, diff --git a/drivers/media/video/gspca/pac7311.c b/drivers/media/video/gspca/pac7311.c index 44fed968672..1cb7e99e92b 100644 --- a/drivers/media/video/gspca/pac7311.c +++ b/drivers/media/video/gspca/pac7311.c @@ -270,7 +270,7 @@ static void reg_w_buf(struct gspca_dev *gspca_dev, memcpy(gspca_dev->usb_buf, buffer, len); ret = usb_control_msg(gspca_dev->dev, usb_sndctrlpipe(gspca_dev->dev, 0), - 1, /* request */ + 0, /* request */ USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE, 0, /* value */ index, gspca_dev->usb_buf, len, @@ -599,7 +599,6 @@ static const unsigned char pac_jpeg_header2[] = { }; static void pac_start_frame(struct gspca_dev *gspca_dev, - struct gspca_frame *frame, __u16 lines, __u16 samples_per_line) { unsigned char tmpbuf[4]; @@ -624,19 +623,13 @@ static void sd_pkt_scan(struct gspca_dev *gspca_dev, int len) /* iso packet length */ { struct sd *sd = (struct sd *) gspca_dev; + u8 *image; unsigned char *sof; - struct gspca_frame *frame; sof = pac_find_sof(&sd->sof_read, data, len); if (sof) { int n, lum_offset, footer_length; - frame = gspca_get_i_frame(gspca_dev); - if (frame == NULL) { - gspca_dev->last_packet_type = DISCARD_PACKET; - return; - } - /* 6 bytes after the FF D9 EOF marker a number of lumination bytes are send corresponding to different parts of the image, the 14th and 15th byte after the EOF seem to @@ -647,16 +640,16 @@ static void sd_pkt_scan(struct gspca_dev *gspca_dev, /* Finish decoding current frame */ n = (sof - data) - (footer_length + sizeof pac_sof_marker); if (n < 0) { - frame->data_end += n; + gspca_dev->image_len += n; n = 0; + } else { + gspca_frame_add(gspca_dev, INTER_PACKET, data, n); } - gspca_frame_add(gspca_dev, INTER_PACKET, - data, n); - if (gspca_dev->last_packet_type != DISCARD_PACKET && - frame->data_end[-2] == 0xff && - frame->data_end[-1] == 0xd9) - gspca_frame_add(gspca_dev, LAST_PACKET, - NULL, 0); + image = gspca_dev->image; + if (image != NULL + && image[gspca_dev->image_len - 2] == 0xff + && image[gspca_dev->image_len - 1] == 0xd9) + gspca_frame_add(gspca_dev, LAST_PACKET, NULL, 0); n = sof - data; len -= n; @@ -671,7 +664,7 @@ static void sd_pkt_scan(struct gspca_dev *gspca_dev, atomic_set(&sd->avg_lum, -1); /* Start the new frame with the jpeg header */ - pac_start_frame(gspca_dev, frame, + pac_start_frame(gspca_dev, gspca_dev->height, gspca_dev->width); } gspca_frame_add(gspca_dev, INTER_PACKET, data, len); diff --git a/drivers/media/video/gspca/sn9c20x.c b/drivers/media/video/gspca/sn9c20x.c index 644a7fd4701..83a718f0f3f 100644 --- a/drivers/media/video/gspca/sn9c20x.c +++ b/drivers/media/video/gspca/sn9c20x.c @@ -20,7 +20,6 @@ #ifdef CONFIG_INPUT #include <linux/input.h> -#include <linux/slab.h> #endif #include "gspca.h" @@ -89,7 +88,7 @@ struct sd { u8 hstart; u8 vstart; - u8 *jpeg_hdr; + u8 jpeg_hdr[JPEG_HDR_SZ]; u8 quality; u8 flags; @@ -2162,10 +2161,6 @@ static int sd_start(struct gspca_dev *gspca_dev) int height = gspca_dev->height; u8 fmt, scale = 0; - sd->jpeg_hdr = kmalloc(JPEG_HDR_SZ, GFP_KERNEL); - if (sd->jpeg_hdr == NULL) - return -ENOMEM; - jpeg_define(sd->jpeg_hdr, height, width, 0x21); jpeg_set_qual(sd->jpeg_hdr, sd->quality); @@ -2197,8 +2192,8 @@ static int sd_start(struct gspca_dev *gspca_dev) } configure_sensor_output(gspca_dev, mode); - reg_w(gspca_dev, 0x1100, sd->jpeg_hdr + JPEG_QT0_OFFSET, 64); - reg_w(gspca_dev, 0x1140, sd->jpeg_hdr + JPEG_QT1_OFFSET, 64); + reg_w(gspca_dev, 0x1100, &sd->jpeg_hdr[JPEG_QT0_OFFSET], 64); + reg_w(gspca_dev, 0x1140, &sd->jpeg_hdr[JPEG_QT1_OFFSET], 64); reg_w(gspca_dev, 0x10fb, CLR_WIN(width, height), 5); reg_w(gspca_dev, 0x1180, HW_WIN(mode, sd->hstart, sd->vstart), 6); reg_w1(gspca_dev, 0x1189, scale); @@ -2226,12 +2221,6 @@ static void sd_stopN(struct gspca_dev *gspca_dev) reg_w1(gspca_dev, 0x1061, gspca_dev->usb_buf[0] & ~0x02); } -static void sd_stop0(struct gspca_dev *gspca_dev) -{ - struct sd *sd = (struct sd *) gspca_dev; - kfree(sd->jpeg_hdr); -} - static void do_autoexposure(struct gspca_dev *gspca_dev, u16 avg_lum) { struct sd *sd = (struct sd *) gspca_dev; @@ -2397,7 +2386,6 @@ static const struct sd_desc sd_desc = { .init = sd_init, .start = sd_start, .stopN = sd_stopN, - .stop0 = sd_stop0, .pkt_scan = sd_pkt_scan, #ifdef CONFIG_INPUT .int_pkt_scan = sd_int_pkt_scan, diff --git a/drivers/media/video/gspca/sonixb.c b/drivers/media/video/gspca/sonixb.c index 95354a339e3..204bb3af455 100644 --- a/drivers/media/video/gspca/sonixb.c +++ b/drivers/media/video/gspca/sonixb.c @@ -1251,16 +1251,10 @@ static void sd_pkt_scan(struct gspca_dev *gspca_dev, if (cam->cam_mode[gspca_dev->curr_mode].priv & MODE_RAW) { /* In raw mode we sometimes get some garbage after the frame ignore this */ - struct gspca_frame *frame; int used; int size = cam->cam_mode[gspca_dev->curr_mode].sizeimage; - frame = gspca_get_i_frame(gspca_dev); - if (frame == NULL) { - gspca_dev->last_packet_type = DISCARD_PACKET; - return; - } - used = frame->data_end - frame->data; + used = gspca_dev->image_len; if (used + len > size) len = size - used; } diff --git a/drivers/media/video/gspca/sonixj.c b/drivers/media/video/gspca/sonixj.c index 176c5b3d5e6..ee17b034bf6 100644 --- a/drivers/media/video/gspca/sonixj.c +++ b/drivers/media/video/gspca/sonixj.c @@ -22,7 +22,6 @@ #define MODULE_NAME "sonixj" #include <linux/input.h> -#include <linux/slab.h> #include "gspca.h" #include "jpeg.h" @@ -392,7 +391,7 @@ static const u8 sn_gc0307[0x1c] = { static const u8 sn_hv7131[0x1c] = { /* reg0 reg1 reg2 reg3 reg4 reg5 reg6 reg7 */ - 0x00, 0x03, 0x64, 0x00, 0x1a, 0x20, 0x20, 0x20, + 0x00, 0x03, 0x60, 0x00, 0x1a, 0x20, 0x20, 0x20, /* reg8 reg9 rega regb regc regd rege regf */ 0x81, 0x11, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* reg10 reg11 reg12 reg13 reg14 reg15 reg16 reg17 */ @@ -403,7 +402,7 @@ static const u8 sn_hv7131[0x1c] = { static const u8 sn_mi0360[0x1c] = { /* reg0 reg1 reg2 reg3 reg4 reg5 reg6 reg7 */ - 0x00, 0x61, 0x44, 0x00, 0x1a, 0x20, 0x20, 0x20, + 0x00, 0x61, 0x40, 0x00, 0x1a, 0x20, 0x20, 0x20, /* reg8 reg9 rega regb regc regd rege regf */ 0x81, 0x5d, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* reg10 reg11 reg12 reg13 reg14 reg15 reg16 reg17 */ @@ -1644,6 +1643,7 @@ static void bridge_init(struct gspca_dev *gspca_dev, const u8 *sn9c1xx) { struct sd *sd = (struct sd *) gspca_dev; + u8 reg0102[2]; const u8 *reg9a; static const u8 reg9a_def[] = {0x00, 0x40, 0x20, 0x00, 0x00, 0x00}; @@ -1656,7 +1656,11 @@ static void bridge_init(struct gspca_dev *gspca_dev, reg_w1(gspca_dev, 0x01, sn9c1xx[1]); /* configure gpio */ - reg_w(gspca_dev, 0x01, &sn9c1xx[1], 2); + reg0102[0] = sn9c1xx[1]; + reg0102[1] = sn9c1xx[2]; + if (gspca_dev->audio) + reg0102[1] |= 0x04; /* keep the audio connection */ + reg_w(gspca_dev, 0x01, reg0102, 2); reg_w(gspca_dev, 0x08, &sn9c1xx[8], 2); reg_w(gspca_dev, 0x17, &sn9c1xx[0x17], 5); switch (sd->sensor) { @@ -1737,13 +1741,12 @@ static void bridge_init(struct gspca_dev *gspca_dev, reg_w1(gspca_dev, 0x01, 0x40); break; case SENSOR_PO2030N: + case SENSOR_OV7660: reg_w1(gspca_dev, 0x01, 0x63); reg_w1(gspca_dev, 0x17, 0x20); reg_w1(gspca_dev, 0x01, 0x62); reg_w1(gspca_dev, 0x01, 0x42); break; - case SENSOR_OV7660: - /* fall thru */ case SENSOR_SP80708: reg_w1(gspca_dev, 0x01, 0x63); reg_w1(gspca_dev, 0x17, 0x20); @@ -1816,7 +1819,7 @@ static int sd_init(struct gspca_dev *gspca_dev) { struct sd *sd = (struct sd *) gspca_dev; const u8 *sn9c1xx; - u8 regGpio[] = { 0x29, 0x74 }; + u8 regGpio[] = { 0x29, 0x74 }; /* with audio */ u8 regF1; /* setup a selector by bridge */ @@ -1856,7 +1859,7 @@ static int sd_init(struct gspca_dev *gspca_dev) po2030n_probe(gspca_dev); break; } - regGpio[1] = 0x70; + regGpio[1] = 0x70; /* no audio */ reg_w(gspca_dev, 0x01, regGpio, 2); break; default: @@ -2274,7 +2277,7 @@ static int sd_start(struct gspca_dev *gspca_dev) { struct sd *sd = (struct sd *) gspca_dev; int i; - u8 reg1, reg2, reg17; + u8 reg1, reg17; const u8 *sn9c1xx; const u8 (*init)[8]; int mode; @@ -2304,23 +2307,6 @@ static int sd_start(struct gspca_dev *gspca_dev) /* initialize the sensor */ i2c_w_seq(gspca_dev, sensor_init[sd->sensor]); - switch (sd->sensor) { - case SENSOR_ADCM1700: - reg2 = 0x60; - break; - case SENSOR_OM6802: - reg2 = 0x71; - break; - case SENSOR_SP80708: - reg2 = 0x62; - break; - default: - reg2 = 0x40; - break; - } - reg_w1(gspca_dev, 0x02, reg2); - reg_w1(gspca_dev, 0x02, reg2); - reg_w1(gspca_dev, 0x15, sn9c1xx[0x15]); reg_w1(gspca_dev, 0x16, sn9c1xx[0x16]); reg_w1(gspca_dev, 0x12, sn9c1xx[0x12]); diff --git a/drivers/media/video/gspca/spca1528.c b/drivers/media/video/gspca/spca1528.c new file mode 100644 index 00000000000..3f514eb1d99 --- /dev/null +++ b/drivers/media/video/gspca/spca1528.c @@ -0,0 +1,605 @@ +/* + * spca1528 subdriver + * + * Copyright (C) 2010 Jean-Francois Moine (http://moinejf.free.fr) + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#define MODULE_NAME "spca1528" + +#include "gspca.h" +#include "jpeg.h" + +MODULE_AUTHOR("Jean-Francois Moine <http://moinejf.free.fr>"); +MODULE_DESCRIPTION("SPCA1528 USB Camera Driver"); +MODULE_LICENSE("GPL"); + +/* specific webcam descriptor */ +struct sd { + struct gspca_dev gspca_dev; /* !! must be the first item */ + + u8 brightness; + u8 contrast; + u8 hue; + u8 color; + u8 sharpness; + + u8 pkt_seq; + + u8 jpeg_hdr[JPEG_HDR_SZ]; +}; + +/* V4L2 controls supported by the driver */ +static int sd_setbrightness(struct gspca_dev *gspca_dev, __s32 val); +static int sd_getbrightness(struct gspca_dev *gspca_dev, __s32 *val); +static int sd_setcontrast(struct gspca_dev *gspca_dev, __s32 val); +static int sd_getcontrast(struct gspca_dev *gspca_dev, __s32 *val); +static int sd_sethue(struct gspca_dev *gspca_dev, __s32 val); +static int sd_gethue(struct gspca_dev *gspca_dev, __s32 *val); +static int sd_setcolor(struct gspca_dev *gspca_dev, __s32 val); +static int sd_getcolor(struct gspca_dev *gspca_dev, __s32 *val); +static int sd_setsharpness(struct gspca_dev *gspca_dev, __s32 val); +static int sd_getsharpness(struct gspca_dev *gspca_dev, __s32 *val); + +static const struct ctrl sd_ctrls[] = { + { + { + .id = V4L2_CID_BRIGHTNESS, + .type = V4L2_CTRL_TYPE_INTEGER, + .name = "Brightness", + .minimum = 0, + .maximum = 255, + .step = 1, +#define BRIGHTNESS_DEF 128 + .default_value = BRIGHTNESS_DEF, + }, + .set = sd_setbrightness, + .get = sd_getbrightness, + }, + { + { + .id = V4L2_CID_CONTRAST, + .type = V4L2_CTRL_TYPE_INTEGER, + .name = "Contrast", + .minimum = 0, + .maximum = 8, + .step = 1, +#define CONTRAST_DEF 1 + .default_value = CONTRAST_DEF, + }, + .set = sd_setcontrast, + .get = sd_getcontrast, + }, + { + { + .id = V4L2_CID_HUE, + .type = V4L2_CTRL_TYPE_INTEGER, + .name = "Hue", + .minimum = 0, + .maximum = 255, + .step = 1, +#define HUE_DEF 0 + .default_value = HUE_DEF, + }, + .set = sd_sethue, + .get = sd_gethue, + }, + { + { + .id = V4L2_CID_SATURATION, + .type = V4L2_CTRL_TYPE_INTEGER, + .name = "Saturation", + .minimum = 0, + .maximum = 8, + .step = 1, +#define COLOR_DEF 1 + .default_value = COLOR_DEF, + }, + .set = sd_setcolor, + .get = sd_getcolor, + }, + { + { + .id = V4L2_CID_SHARPNESS, + .type = V4L2_CTRL_TYPE_INTEGER, + .name = "Sharpness", + .minimum = 0, + .maximum = 255, + .step = 1, +#define SHARPNESS_DEF 0 + .default_value = SHARPNESS_DEF, + }, + .set = sd_setsharpness, + .get = sd_getsharpness, + }, +}; + +static const struct v4l2_pix_format vga_mode[] = { +/* (does not work correctly) + {176, 144, V4L2_PIX_FMT_JPEG, V4L2_FIELD_NONE, + .bytesperline = 176, + .sizeimage = 176 * 144 * 5 / 8 + 590, + .colorspace = V4L2_COLORSPACE_JPEG, + .priv = 3}, +*/ + {320, 240, V4L2_PIX_FMT_JPEG, V4L2_FIELD_NONE, + .bytesperline = 320, + .sizeimage = 320 * 240 * 4 / 8 + 590, + .colorspace = V4L2_COLORSPACE_JPEG, + .priv = 2}, + {640, 480, V4L2_PIX_FMT_JPEG, V4L2_FIELD_NONE, + .bytesperline = 640, + .sizeimage = 640 * 480 * 3 / 8 + 590, + .colorspace = V4L2_COLORSPACE_JPEG, + .priv = 1}, +}; + +/* read <len> bytes to gspca usb_buf */ +static void reg_r(struct gspca_dev *gspca_dev, + u8 req, + u16 index, + int len) +{ +#if USB_BUF_SZ < 64 +#error "USB buffer too small" +#endif + struct usb_device *dev = gspca_dev->dev; + int ret; + + if (gspca_dev->usb_err < 0) + return; + ret = usb_control_msg(dev, usb_rcvctrlpipe(dev, 0), + req, + USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE, + 0x0000, /* value */ + index, + gspca_dev->usb_buf, len, + 500); + PDEBUG(D_USBI, "GET %02x 0000 %04x %02x", req, index, + gspca_dev->usb_buf[0]); + if (ret < 0) { + PDEBUG(D_ERR, "reg_r err %d", ret); + gspca_dev->usb_err = ret; + } +} + +static void reg_w(struct gspca_dev *gspca_dev, + u8 req, + u16 value, + u16 index) +{ + struct usb_device *dev = gspca_dev->dev; + int ret; + + if (gspca_dev->usb_err < 0) + return; + PDEBUG(D_USBO, "SET %02x %04x %04x", req, value, index); + ret = usb_control_msg(dev, usb_sndctrlpipe(dev, 0), + req, + USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE, + value, index, + NULL, 0, 500); + if (ret < 0) { + PDEBUG(D_ERR, "reg_w err %d", ret); + gspca_dev->usb_err = ret; + } +} + +static void reg_wb(struct gspca_dev *gspca_dev, + u8 req, + u16 value, + u16 index, + u8 byte) +{ + struct usb_device *dev = gspca_dev->dev; + int ret; + + if (gspca_dev->usb_err < 0) + return; + PDEBUG(D_USBO, "SET %02x %04x %04x %02x", req, value, index, byte); + gspca_dev->usb_buf[0] = byte; + ret = usb_control_msg(dev, usb_sndctrlpipe(dev, 0), + req, + USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE, + value, index, + gspca_dev->usb_buf, 1, 500); + if (ret < 0) { + PDEBUG(D_ERR, "reg_w err %d", ret); + gspca_dev->usb_err = ret; + } +} + +static void wait_status_0(struct gspca_dev *gspca_dev) +{ + int i; + + i = 20; + do { + reg_r(gspca_dev, 0x21, 0x0000, 1); + if (gspca_dev->usb_buf[0] == 0) + return; + msleep(30); + } while (--i > 0); + PDEBUG(D_ERR, "wait_status_0 timeout"); + gspca_dev->usb_err = -ETIME; +} + +static void wait_status_1(struct gspca_dev *gspca_dev) +{ + int i; + + i = 10; + do { + reg_r(gspca_dev, 0x21, 0x0001, 1); + msleep(10); + if (gspca_dev->usb_buf[0] == 1) { + reg_wb(gspca_dev, 0x21, 0x0000, 0x0001, 0x00); + reg_r(gspca_dev, 0x21, 0x0001, 1); + return; + } + } while (--i > 0); + PDEBUG(D_ERR, "wait_status_1 timeout"); + gspca_dev->usb_err = -ETIME; +} + +static void setbrightness(struct gspca_dev *gspca_dev) +{ + struct sd *sd = (struct sd *) gspca_dev; + + reg_wb(gspca_dev, 0xc0, 0x0000, 0x00c0, sd->brightness); +} + +static void setcontrast(struct gspca_dev *gspca_dev) +{ + struct sd *sd = (struct sd *) gspca_dev; + + reg_wb(gspca_dev, 0xc1, 0x0000, 0x00c1, sd->contrast); +} + +static void sethue(struct gspca_dev *gspca_dev) +{ + struct sd *sd = (struct sd *) gspca_dev; + + reg_wb(gspca_dev, 0xc2, 0x0000, 0x0000, sd->hue); +} + +static void setcolor(struct gspca_dev *gspca_dev) +{ + struct sd *sd = (struct sd *) gspca_dev; + + reg_wb(gspca_dev, 0xc3, 0x0000, 0x00c3, sd->color); +} + +static void setsharpness(struct gspca_dev *gspca_dev) +{ + struct sd *sd = (struct sd *) gspca_dev; + + reg_wb(gspca_dev, 0xc4, 0x0000, 0x00c4, sd->sharpness); +} + +/* this function is called at probe time */ +static int sd_config(struct gspca_dev *gspca_dev, + const struct usb_device_id *id) +{ + struct sd *sd = (struct sd *) gspca_dev; + + gspca_dev->cam.cam_mode = vga_mode; + gspca_dev->cam.nmodes = ARRAY_SIZE(vga_mode); + gspca_dev->cam.npkt = 128; /* number of packets per ISOC message */ + /*fixme: 256 in ms-win traces*/ + + sd->brightness = BRIGHTNESS_DEF; + sd->contrast = CONTRAST_DEF; + sd->hue = HUE_DEF; + sd->color = COLOR_DEF; + sd->sharpness = SHARPNESS_DEF; + + gspca_dev->nbalt = 4; /* use alternate setting 3 */ + + return 0; +} + +/* this function is called at probe and resume time */ +static int sd_init(struct gspca_dev *gspca_dev) +{ + reg_w(gspca_dev, 0x00, 0x0001, 0x2067); + reg_w(gspca_dev, 0x00, 0x00d0, 0x206b); + reg_w(gspca_dev, 0x00, 0x0000, 0x206c); + reg_w(gspca_dev, 0x00, 0x0001, 0x2069); + msleep(8); + reg_w(gspca_dev, 0x00, 0x00c0, 0x206b); + reg_w(gspca_dev, 0x00, 0x0000, 0x206c); + reg_w(gspca_dev, 0x00, 0x0001, 0x2069); + + reg_r(gspca_dev, 0x20, 0x0000, 1); + reg_r(gspca_dev, 0x20, 0x0000, 5); + reg_r(gspca_dev, 0x23, 0x0000, 64); + PDEBUG(D_PROBE, "%s%s", &gspca_dev->usb_buf[0x1c], + &gspca_dev->usb_buf[0x30]); + reg_r(gspca_dev, 0x23, 0x0001, 64); + return gspca_dev->usb_err; +} + +/* function called at start time before URB creation */ +static int sd_isoc_init(struct gspca_dev *gspca_dev) +{ + u8 mode; + + reg_r(gspca_dev, 0x00, 0x2520, 1); + wait_status_0(gspca_dev); + reg_w(gspca_dev, 0xc5, 0x0003, 0x0000); + wait_status_1(gspca_dev); + + wait_status_0(gspca_dev); + mode = gspca_dev->cam.cam_mode[gspca_dev->curr_mode].priv; + reg_wb(gspca_dev, 0x25, 0x0000, 0x0004, mode); + reg_r(gspca_dev, 0x25, 0x0004, 1); + reg_wb(gspca_dev, 0x27, 0x0000, 0x0000, 0x06); + reg_r(gspca_dev, 0x27, 0x0000, 1); + return gspca_dev->usb_err; +} + +/* -- start the camera -- */ +static int sd_start(struct gspca_dev *gspca_dev) +{ + struct sd *sd = (struct sd *) gspca_dev; + + /* initialize the JPEG header */ + jpeg_define(sd->jpeg_hdr, gspca_dev->height, gspca_dev->width, + 0x22); /* JPEG 411 */ + + /* the JPEG quality seems to be 82% */ + jpeg_set_qual(sd->jpeg_hdr, 82); + + /* set the controls */ + setbrightness(gspca_dev); + setcontrast(gspca_dev); + sethue(gspca_dev); + setcolor(gspca_dev); + setsharpness(gspca_dev); + + msleep(5); + reg_r(gspca_dev, 0x00, 0x2520, 1); + msleep(8); + + /* start the capture */ + wait_status_0(gspca_dev); + reg_w(gspca_dev, 0x31, 0x0000, 0x0004); + wait_status_1(gspca_dev); + wait_status_0(gspca_dev); + msleep(200); + + sd->pkt_seq = 0; + return gspca_dev->usb_err; +} + +static void sd_stopN(struct gspca_dev *gspca_dev) +{ + /* stop the capture */ + wait_status_0(gspca_dev); + reg_w(gspca_dev, 0x31, 0x0000, 0x0000); + wait_status_1(gspca_dev); + wait_status_0(gspca_dev); +} + +/* move a packet adding 0x00 after 0xff */ +static void add_packet(struct gspca_dev *gspca_dev, + u8 *data, + int len) +{ + int i; + + i = 0; + do { + if (data[i] == 0xff) { + gspca_frame_add(gspca_dev, INTER_PACKET, + data, i + 1); + len -= i; + data += i; + *data = 0x00; + i = 0; + } + } while (++i < len); + gspca_frame_add(gspca_dev, INTER_PACKET, data, len); +} + +static void sd_pkt_scan(struct gspca_dev *gspca_dev, + u8 *data, /* isoc packet */ + int len) /* iso packet length */ +{ + struct sd *sd = (struct sd *) gspca_dev; + static const u8 ffd9[] = {0xff, 0xd9}; + + /* image packets start with: + * 02 8n + * with <n> bit: + * 0x01: even (0) / odd (1) image + * 0x02: end of image when set + */ + if (len < 3) + return; /* empty packet */ + if (*data == 0x02) { + if (data[1] & 0x02) { + sd->pkt_seq = !(data[1] & 1); + add_packet(gspca_dev, data + 2, len - 2); + gspca_frame_add(gspca_dev, LAST_PACKET, + ffd9, 2); + return; + } + if ((data[1] & 1) != sd->pkt_seq) + goto err; + if (gspca_dev->last_packet_type == LAST_PACKET) + gspca_frame_add(gspca_dev, FIRST_PACKET, + sd->jpeg_hdr, JPEG_HDR_SZ); + add_packet(gspca_dev, data + 2, len - 2); + return; + } +err: + gspca_dev->last_packet_type = DISCARD_PACKET; +} + +static int sd_setbrightness(struct gspca_dev *gspca_dev, __s32 val) +{ + struct sd *sd = (struct sd *) gspca_dev; + + sd->brightness = val; + if (gspca_dev->streaming) + setbrightness(gspca_dev); + return gspca_dev->usb_err; +} + +static int sd_getbrightness(struct gspca_dev *gspca_dev, __s32 *val) +{ + struct sd *sd = (struct sd *) gspca_dev; + + *val = sd->brightness; + return 0; +} + +static int sd_setcontrast(struct gspca_dev *gspca_dev, __s32 val) +{ + struct sd *sd = (struct sd *) gspca_dev; + + sd->contrast = val; + if (gspca_dev->streaming) + setcontrast(gspca_dev); + return gspca_dev->usb_err; +} + +static int sd_getcontrast(struct gspca_dev *gspca_dev, __s32 *val) +{ + struct sd *sd = (struct sd *) gspca_dev; + + *val = sd->contrast; + return 0; +} + +static int sd_sethue(struct gspca_dev *gspca_dev, __s32 val) +{ + struct sd *sd = (struct sd *) gspca_dev; + + sd->hue = val; + if (gspca_dev->streaming) + sethue(gspca_dev); + return gspca_dev->usb_err; +} + +static int sd_gethue(struct gspca_dev *gspca_dev, __s32 *val) +{ + struct sd *sd = (struct sd *) gspca_dev; + + *val = sd->hue; + return 0; +} + +static int sd_setcolor(struct gspca_dev *gspca_dev, __s32 val) +{ + struct sd *sd = (struct sd *) gspca_dev; + + sd->color = val; + if (gspca_dev->streaming) + setcolor(gspca_dev); + return gspca_dev->usb_err; +} + +static int sd_getcolor(struct gspca_dev *gspca_dev, __s32 *val) +{ + struct sd *sd = (struct sd *) gspca_dev; + + *val = sd->color; + return 0; +} + +static int sd_setsharpness(struct gspca_dev *gspca_dev, __s32 val) +{ + struct sd *sd = (struct sd *) gspca_dev; + + sd->sharpness = val; + if (gspca_dev->streaming) + setsharpness(gspca_dev); + return gspca_dev->usb_err; +} + +static int sd_getsharpness(struct gspca_dev *gspca_dev, __s32 *val) +{ + struct sd *sd = (struct sd *) gspca_dev; + + *val = sd->sharpness; + return 0; +} + +/* sub-driver description */ +static const struct sd_desc sd_desc = { + .name = MODULE_NAME, + .ctrls = sd_ctrls, + .nctrls = ARRAY_SIZE(sd_ctrls), + .config = sd_config, + .init = sd_init, + .isoc_init = sd_isoc_init, + .start = sd_start, + .stopN = sd_stopN, + .pkt_scan = sd_pkt_scan, +}; + +/* -- module initialisation -- */ +static const __devinitdata struct usb_device_id device_table[] = { + {USB_DEVICE(0x04fc, 0x1528)}, + {} +}; +MODULE_DEVICE_TABLE(usb, device_table); + +/* -- device connect -- */ +static int sd_probe(struct usb_interface *intf, + const struct usb_device_id *id) +{ + /* the video interface for isochronous transfer is 1 */ + if (intf->cur_altsetting->desc.bInterfaceNumber != 1) + return -ENODEV; + + return gspca_dev_probe2(intf, id, &sd_desc, sizeof(struct sd), + THIS_MODULE); +} + +static struct usb_driver sd_driver = { + .name = MODULE_NAME, + .id_table = device_table, + .probe = sd_probe, + .disconnect = gspca_disconnect, +#ifdef CONFIG_PM + .suspend = gspca_suspend, + .resume = gspca_resume, +#endif +}; + +/* -- module insert / remove -- */ +static int __init sd_mod_init(void) +{ + int ret; + + ret = usb_register(&sd_driver); + if (ret < 0) + return ret; + info("registered"); + return 0; +} +static void __exit sd_mod_exit(void) +{ + usb_deregister(&sd_driver); + info("deregistered"); +} + +module_init(sd_mod_init); +module_exit(sd_mod_exit); diff --git a/drivers/media/video/gspca/spca500.c b/drivers/media/video/gspca/spca500.c index b866c73c97d..c02beb6c1e9 100644 --- a/drivers/media/video/gspca/spca500.c +++ b/drivers/media/video/gspca/spca500.c @@ -57,7 +57,7 @@ struct sd { #define PalmPixDC85 13 #define ToptroIndus 14 - u8 *jpeg_hdr; + u8 jpeg_hdr[JPEG_HDR_SZ]; }; /* V4L2 controls supported by the driver */ @@ -669,9 +669,6 @@ static int sd_start(struct gspca_dev *gspca_dev) __u8 xmult, ymult; /* create the JPEG header */ - sd->jpeg_hdr = kmalloc(JPEG_HDR_SZ, GFP_KERNEL); - if (!sd->jpeg_hdr) - return -ENOMEM; jpeg_define(sd->jpeg_hdr, gspca_dev->height, gspca_dev->width, 0x22); /* JPEG 411 */ jpeg_set_qual(sd->jpeg_hdr, sd->quality); @@ -891,13 +888,6 @@ static void sd_stopN(struct gspca_dev *gspca_dev) gspca_dev->usb_buf[0]); } -static void sd_stop0(struct gspca_dev *gspca_dev) -{ - struct sd *sd = (struct sd *) gspca_dev; - - kfree(sd->jpeg_hdr); -} - static void sd_pkt_scan(struct gspca_dev *gspca_dev, u8 *data, /* isoc packet */ int len) /* iso packet length */ @@ -1055,7 +1045,6 @@ static const struct sd_desc sd_desc = { .init = sd_init, .start = sd_start, .stopN = sd_stopN, - .stop0 = sd_stop0, .pkt_scan = sd_pkt_scan, .get_jcomp = sd_get_jcomp, .set_jcomp = sd_set_jcomp, diff --git a/drivers/media/video/gspca/sq930x.c b/drivers/media/video/gspca/sq930x.c new file mode 100644 index 00000000000..37cee5e063c --- /dev/null +++ b/drivers/media/video/gspca/sq930x.c @@ -0,0 +1,1402 @@ +/* + * SQ930x subdriver + * + * Copyright (C) 2010 Jean-François Moine <http://moinejf.free.fr> + * Copyright (C) 2006 -2008 Gerard Klaver <gerard at gkall dot hobby dot nl> + * Copyright (C) 2007 Sam Revitch <samr7@cs.washington.edu> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#define MODULE_NAME "sq930x" + +#include "gspca.h" +#include "jpeg.h" + +MODULE_AUTHOR("Jean-Francois Moine <http://moinejf.free.fr>\n" + "Gerard Klaver <gerard at gkall dot hobby dot nl\n" + "Sam Revitch <samr7@cs.washington.edu>"); +MODULE_DESCRIPTION("GSPCA/SQ930x USB Camera Driver"); +MODULE_LICENSE("GPL"); + +#define BULK_TRANSFER_LEN 5128 + +/* Structure to hold all of our device specific stuff */ +struct sd { + struct gspca_dev gspca_dev; /* !! must be the first item */ + + u16 expo; + u8 gain; + + u8 quality; /* webcam quality 0..3 */ +#define QUALITY_DEF 1 + + u8 gpio[2]; + + u8 eof_len; + u8 do_ctrl; + + u8 sensor; +enum { + SENSOR_ICX098BQ, + SENSOR_LZ24BP, + SENSOR_MI0360, + SENSOR_MT9V111, + SENSOR_OV7660, + SENSOR_OV9630, +} sensors; + u8 type; +#define Generic 0 +#define Creative_live_motion 1 + + u8 jpeg_hdr[JPEG_HDR_SZ]; +}; + +static int sd_setexpo(struct gspca_dev *gspca_dev, __s32 val); +static int sd_getexpo(struct gspca_dev *gspca_dev, __s32 *val); +static int sd_setgain(struct gspca_dev *gspca_dev, __s32 val); +static int sd_getgain(struct gspca_dev *gspca_dev, __s32 *val); + +static const struct ctrl sd_ctrls[] = { + { + { + .id = V4L2_CID_EXPOSURE, + .type = V4L2_CTRL_TYPE_INTEGER, + .name = "Exposure", + .minimum = 0x0001, + .maximum = 0x0fff, + .step = 1, +#define EXPO_DEF 0x027d + .default_value = EXPO_DEF, + }, + .set = sd_setexpo, + .get = sd_getexpo, + }, + { + { + .id = V4L2_CID_GAIN, + .type = V4L2_CTRL_TYPE_INTEGER, + .name = "Gain", + .minimum = 0x01, + .maximum = 0xff, + .step = 1, +#define GAIN_DEF 0x61 + .default_value = GAIN_DEF, + }, + .set = sd_setgain, + .get = sd_getgain, + }, +}; + +static struct v4l2_pix_format vga_mode[] = { + {160, 120, V4L2_PIX_FMT_JPEG, V4L2_FIELD_NONE, + .bytesperline = 160, + .sizeimage = 160 * 120 * 5 / 8 + 590, + .colorspace = V4L2_COLORSPACE_JPEG, + .priv = 0}, + {320, 240, V4L2_PIX_FMT_JPEG, V4L2_FIELD_NONE, + .bytesperline = 320, + .sizeimage = 320 * 240 * 4 / 8 + 590, + .colorspace = V4L2_COLORSPACE_JPEG, + .priv = 1}, + {640, 480, V4L2_PIX_FMT_JPEG, V4L2_FIELD_NONE, + .bytesperline = 640, + .sizeimage = 640 * 480 * 3 / 8 + 590, + .colorspace = V4L2_COLORSPACE_JPEG, + .priv = 2}, +}; + +/* JPEG quality indexed by webcam quality */ +#define QUAL_0 90 +#define QUAL_1 85 +#define QUAL_2 75 +#define QUAL_3 70 +static const u8 quality_tb[4] = { QUAL_0, QUAL_1, QUAL_2, QUAL_3 }; + +/* sq930x registers */ +#define SQ930_CTRL_UCBUS_IO 0x0001 +#define SQ930_CTRL_I2C_IO 0x0002 +#define SQ930_CTRL_GPIO 0x0005 +#define SQ930_CTRL_CAP_START 0x0010 +#define SQ930_CTRL_CAP_STOP 0x0011 +#define SQ930_CTRL_SET_EXPOSURE 0x001d +#define SQ930_CTRL_RESET 0x001e +#define SQ930_CTRL_GET_DEV_INFO 0x001f + +/* gpio 1 (8..15) */ +#define SQ930_GPIO_DFL_I2C_SDA 0x0001 +#define SQ930_GPIO_DFL_I2C_SCL 0x0002 +#define SQ930_GPIO_RSTBAR 0x0004 +#define SQ930_GPIO_EXTRA1 0x0040 +#define SQ930_GPIO_EXTRA2 0x0080 +/* gpio 3 (24..31) */ +#define SQ930_GPIO_POWER 0x0200 +#define SQ930_GPIO_DFL_LED 0x1000 + +struct ucbus_write_cmd { + u16 bw_addr; + u8 bw_data; +}; +struct i2c_write_cmd { + u8 reg; + u16 val; +}; + +static const struct ucbus_write_cmd icx098bq_start_0[] = { + {0x0354, 0x00}, {0x03fa, 0x00}, {0xf800, 0x02}, {0xf801, 0xce}, + {0xf802, 0xc1}, {0xf804, 0x00}, {0xf808, 0x00}, {0xf809, 0x0e}, + {0xf80a, 0x01}, {0xf80b, 0xee}, {0xf807, 0x60}, {0xf80c, 0x02}, + {0xf80d, 0xf0}, {0xf80e, 0x03}, {0xf80f, 0x0a}, {0xf81c, 0x02}, + {0xf81d, 0xf0}, {0xf81e, 0x03}, {0xf81f, 0x0a}, {0xf83a, 0x00}, + {0xf83b, 0x10}, {0xf83c, 0x00}, {0xf83d, 0x4e}, {0xf810, 0x04}, + {0xf811, 0x00}, {0xf812, 0x02}, {0xf813, 0x10}, {0xf803, 0x00}, + {0xf814, 0x01}, {0xf815, 0x18}, {0xf816, 0x00}, {0xf817, 0x48}, + {0xf818, 0x00}, {0xf819, 0x25}, {0xf81a, 0x00}, {0xf81b, 0x3c}, + {0xf82f, 0x03}, {0xf820, 0xff}, {0xf821, 0x0d}, {0xf822, 0xff}, + {0xf823, 0x07}, {0xf824, 0xff}, {0xf825, 0x03}, {0xf826, 0xff}, + {0xf827, 0x06}, {0xf828, 0xff}, {0xf829, 0x03}, {0xf82a, 0xff}, + {0xf82b, 0x0c}, {0xf82c, 0xfd}, {0xf82d, 0x01}, {0xf82e, 0x00}, + {0xf830, 0x00}, {0xf831, 0x47}, {0xf832, 0x00}, {0xf833, 0x00}, + {0xf850, 0x00}, {0xf851, 0x00}, {0xf852, 0x00}, {0xf853, 0x24}, + {0xf854, 0x00}, {0xf855, 0x18}, {0xf856, 0x00}, {0xf857, 0x3c}, + {0xf858, 0x00}, {0xf859, 0x0c}, {0xf85a, 0x00}, {0xf85b, 0x30}, + {0xf85c, 0x00}, {0xf85d, 0x0c}, {0xf85e, 0x00}, {0xf85f, 0x30}, + {0xf860, 0x00}, {0xf861, 0x48}, {0xf862, 0x01}, {0xf863, 0xdc}, + {0xf864, 0xff}, {0xf865, 0x98}, {0xf866, 0xff}, {0xf867, 0xc0}, + {0xf868, 0xff}, {0xf869, 0x70}, {0xf86c, 0xff}, {0xf86d, 0x00}, + {0xf86a, 0xff}, {0xf86b, 0x48}, {0xf86e, 0xff}, {0xf86f, 0x00}, + {0xf870, 0x01}, {0xf871, 0xdb}, {0xf872, 0x01}, {0xf873, 0xfa}, + {0xf874, 0x01}, {0xf875, 0xdb}, {0xf876, 0x01}, {0xf877, 0xfa}, + {0xf878, 0x0f}, {0xf879, 0x0f}, {0xf87a, 0xff}, {0xf87b, 0xff}, + {0xf800, 0x03} +}; +static const struct ucbus_write_cmd icx098bq_start_1[] = { + {0xf5f0, 0x00}, {0xf5f1, 0xcd}, {0xf5f2, 0x80}, {0xf5f3, 0x80}, + {0xf5f4, 0xc0}, + {0xf5f0, 0x49}, {0xf5f1, 0xcd}, {0xf5f2, 0x80}, {0xf5f3, 0x80}, + {0xf5f4, 0xc0}, + {0xf5fa, 0x00}, {0xf5f6, 0x00}, {0xf5f7, 0x00}, {0xf5f8, 0x00}, + {0xf5f9, 0x00} +}; + +static const struct ucbus_write_cmd icx098bq_start_2[] = { + {0xf800, 0x02}, {0xf807, 0xff}, {0xf805, 0x82}, {0xf806, 0x00}, + {0xf807, 0x7f}, {0xf800, 0x03}, + {0xf800, 0x02}, {0xf807, 0xff}, {0xf805, 0x40}, {0xf806, 0x00}, + {0xf807, 0x7f}, {0xf800, 0x03}, + {0xf800, 0x02}, {0xf807, 0xff}, {0xf805, 0xcf}, {0xf806, 0xd0}, + {0xf807, 0x7f}, {0xf800, 0x03}, + {0xf800, 0x02}, {0xf807, 0xff}, {0xf805, 0x00}, {0xf806, 0x00}, + {0xf807, 0x7f}, {0xf800, 0x03} +}; + +static const struct ucbus_write_cmd lz24bp_start_0[] = { + {0x0354, 0x00}, {0x03fa, 0x00}, {0xf800, 0x02}, {0xf801, 0xbe}, + {0xf802, 0xc6}, {0xf804, 0x00}, {0xf808, 0x00}, {0xf809, 0x06}, + {0xf80a, 0x01}, {0xf80b, 0xfe}, {0xf807, 0x84}, {0xf80c, 0x02}, + {0xf80d, 0xf7}, {0xf80e, 0x03}, {0xf80f, 0x0b}, {0xf81c, 0x00}, + {0xf81d, 0x49}, {0xf81e, 0x03}, {0xf81f, 0x0b}, {0xf83a, 0x00}, + {0xf83b, 0x01}, {0xf83c, 0x00}, {0xf83d, 0x6b}, {0xf810, 0x03}, + {0xf811, 0x10}, {0xf812, 0x02}, {0xf813, 0x6f}, {0xf803, 0x00}, + {0xf814, 0x00}, {0xf815, 0x44}, {0xf816, 0x00}, {0xf817, 0x48}, + {0xf818, 0x00}, {0xf819, 0x25}, {0xf81a, 0x00}, {0xf81b, 0x3c}, + {0xf82f, 0x03}, {0xf820, 0xff}, {0xf821, 0x0d}, {0xf822, 0xff}, + {0xf823, 0x07}, {0xf824, 0xfd}, {0xf825, 0x07}, {0xf826, 0xf0}, + {0xf827, 0x0c}, {0xf828, 0xff}, {0xf829, 0x03}, {0xf82a, 0xff}, + {0xf82b, 0x0c}, {0xf82c, 0xfc}, {0xf82d, 0x01}, {0xf82e, 0x00}, + {0xf830, 0x00}, {0xf831, 0x47}, {0xf832, 0x00}, {0xf833, 0x00}, + {0xf850, 0x00}, {0xf851, 0x00}, {0xf852, 0x00}, {0xf853, 0x24}, + {0xf854, 0x00}, {0xf855, 0x0c}, {0xf856, 0x00}, {0xf857, 0x30}, + {0xf858, 0x00}, {0xf859, 0x18}, {0xf85a, 0x00}, {0xf85b, 0x3c}, + {0xf85c, 0x00}, {0xf85d, 0x18}, {0xf85e, 0x00}, {0xf85f, 0x3c}, + {0xf860, 0xff}, {0xf861, 0x37}, {0xf862, 0xff}, {0xf863, 0x1d}, + {0xf864, 0xff}, {0xf865, 0x98}, {0xf866, 0xff}, {0xf867, 0xc0}, + {0xf868, 0x00}, {0xf869, 0x37}, {0xf86c, 0x02}, {0xf86d, 0x1d}, + {0xf86a, 0x00}, {0xf86b, 0x37}, {0xf86e, 0x02}, {0xf86f, 0x1d}, + {0xf870, 0x01}, {0xf871, 0xc6}, {0xf872, 0x02}, {0xf873, 0x04}, + {0xf874, 0x01}, {0xf875, 0xc6}, {0xf876, 0x02}, {0xf877, 0x04}, + {0xf878, 0x0f}, {0xf879, 0x0f}, {0xf87a, 0xff}, {0xf87b, 0xff}, + {0xf800, 0x03} +}; +static const struct ucbus_write_cmd lz24bp_start_1_gen[] = { + {0xf5f0, 0x00}, {0xf5f1, 0xff}, {0xf5f2, 0x80}, {0xf5f3, 0x80}, + {0xf5f4, 0xb3}, + {0xf5f0, 0x40}, {0xf5f1, 0xff}, {0xf5f2, 0x80}, {0xf5f3, 0x80}, + {0xf5f4, 0xb3}, + {0xf5fa, 0x00}, {0xf5f6, 0x00}, {0xf5f7, 0x00}, {0xf5f8, 0x00}, + {0xf5f9, 0x00} +}; + +static const struct ucbus_write_cmd lz24bp_start_1_clm[] = { + {0xf5f0, 0x00}, {0xf5f1, 0xff}, {0xf5f2, 0x88}, {0xf5f3, 0x88}, + {0xf5f4, 0xc0}, + {0xf5f0, 0x40}, {0xf5f1, 0xff}, {0xf5f2, 0x88}, {0xf5f3, 0x88}, + {0xf5f4, 0xc0}, + {0xf5fa, 0x00}, {0xf5f6, 0x00}, {0xf5f7, 0x00}, {0xf5f8, 0x00}, + {0xf5f9, 0x00} +}; + +static const struct ucbus_write_cmd lz24bp_start_2[] = { + {0xf800, 0x02}, {0xf807, 0xff}, {0xf805, 0x80}, {0xf806, 0x00}, + {0xf807, 0x7f}, {0xf800, 0x03}, + {0xf800, 0x02}, {0xf807, 0xff}, {0xf805, 0x4e}, {0xf806, 0x00}, + {0xf807, 0x7f}, {0xf800, 0x03}, + {0xf800, 0x02}, {0xf807, 0xff}, {0xf805, 0xc0}, {0xf806, 0x48}, + {0xf807, 0x7f}, {0xf800, 0x03}, + {0xf800, 0x02}, {0xf807, 0xff}, {0xf805, 0x00}, {0xf806, 0x00}, + {0xf807, 0x7f}, {0xf800, 0x03} +}; + +static const struct ucbus_write_cmd mi0360_start_0[] = { + {0x0354, 0x00}, {0x03fa, 0x00}, {0xf332, 0xcc}, {0xf333, 0xcc}, + {0xf334, 0xcc}, {0xf335, 0xcc}, {0xf33f, 0x00} +}; +static const struct i2c_write_cmd mi0360_init_23[] = { + {0x30, 0x0040}, /* reserved - def 0x0005 */ + {0x31, 0x0000}, /* reserved - def 0x002a */ + {0x34, 0x0100}, /* reserved - def 0x0100 */ + {0x3d, 0x068f}, /* reserved - def 0x068f */ +}; +static const struct i2c_write_cmd mi0360_init_24[] = { + {0x03, 0x01e5}, /* window height */ + {0x04, 0x0285}, /* window width */ +}; +static const struct i2c_write_cmd mi0360_init_25[] = { + {0x35, 0x0020}, /* global gain */ + {0x2b, 0x0020}, /* green1 gain */ + {0x2c, 0x002a}, /* blue gain */ + {0x2d, 0x0028}, /* red gain */ + {0x2e, 0x0020}, /* green2 gain */ +}; +static const struct ucbus_write_cmd mi0360_start_1[] = { + {0xf5f0, 0x11}, {0xf5f1, 0x99}, {0xf5f2, 0x80}, {0xf5f3, 0x80}, + {0xf5f4, 0xa6}, + {0xf5f0, 0x51}, {0xf5f1, 0x99}, {0xf5f2, 0x80}, {0xf5f3, 0x80}, + {0xf5f4, 0xa6}, + {0xf5fa, 0x00}, {0xf5f6, 0x00}, {0xf5f7, 0x00}, {0xf5f8, 0x00}, + {0xf5f9, 0x00} +}; +static const struct i2c_write_cmd mi0360_start_2[] = { + {0x62, 0x041d}, /* reserved - def 0x0418 */ +}; +static const struct i2c_write_cmd mi0360_start_3[] = { + {0x05, 0x007b}, /* horiz blanking */ +}; +static const struct i2c_write_cmd mi0360_start_4[] = { + {0x05, 0x03f5}, /* horiz blanking */ +}; + +static const struct i2c_write_cmd mt9v111_init_0[] = { + {0x01, 0x0001}, /* select IFP/SOC registers */ + {0x06, 0x300c}, /* operating mode control */ + {0x08, 0xcc00}, /* output format control (RGB) */ + {0x01, 0x0004}, /* select core registers */ +}; +static const struct i2c_write_cmd mt9v111_init_1[] = { + {0x03, 0x01e5}, /* window height */ + {0x04, 0x0285}, /* window width */ +}; +static const struct i2c_write_cmd mt9v111_init_2[] = { + {0x30, 0x7800}, + {0x31, 0x0000}, + {0x07, 0x3002}, /* output control */ + {0x35, 0x0020}, /* global gain */ + {0x2b, 0x0020}, /* green1 gain */ + {0x2c, 0x0020}, /* blue gain */ + {0x2d, 0x0020}, /* red gain */ + {0x2e, 0x0020}, /* green2 gain */ +}; +static const struct ucbus_write_cmd mt9v111_start_1[] = { + {0xf5f0, 0x11}, {0xf5f1, 0x96}, {0xf5f2, 0x80}, {0xf5f3, 0x80}, + {0xf5f4, 0xaa}, + {0xf5f0, 0x51}, {0xf5f1, 0x96}, {0xf5f2, 0x80}, {0xf5f3, 0x80}, + {0xf5f4, 0xaa}, + {0xf5fa, 0x00}, {0xf5f6, 0x0a}, {0xf5f7, 0x0a}, {0xf5f8, 0x0a}, + {0xf5f9, 0x0a} +}; +static const struct i2c_write_cmd mt9v111_init_3[] = { + {0x62, 0x0405}, +}; +static const struct i2c_write_cmd mt9v111_init_4[] = { + {0x05, 0x00ce}, /* horizontal blanking */ +}; + +static const struct ucbus_write_cmd ov7660_start_0[] = { + {0x0354, 0x00}, {0x03fa, 0x00}, {0xf332, 0x00}, {0xf333, 0xc0}, + {0xf334, 0x39}, {0xf335, 0xe7}, {0xf33f, 0x03} +}; + +static const struct ucbus_write_cmd ov9630_start_0[] = { + {0x0354, 0x00}, {0x03fa, 0x00}, {0xf332, 0x00}, {0xf333, 0x00}, + {0xf334, 0x3e}, {0xf335, 0xf8}, {0xf33f, 0x03} +}; + +static const struct cap_s { + u8 cc_sizeid; + u8 cc_bytes[32]; +} capconfig[4][3] = { + [SENSOR_ICX098BQ] = { + {0, /* JPEG, 160x120 */ + {0x01, 0x1f, 0x20, 0x0e, 0x00, 0x9f, 0x02, 0xee, + 0x01, 0x02, 0x00, 0x08, 0x18, 0x12, 0x78, 0xc8, + 0x02, 0x8b, 0x00, 0x8b, 0x00, 0x41, 0x01, 0x41, + 0x01, 0x41, 0x01, 0x05, 0x40, 0x01, 0xf0, 0x00} }, + {2, /* JPEG, 320x240 */ + {0x01, 0x1f, 0x20, 0x0e, 0x00, 0x9f, 0x02, 0xee, + 0x01, 0x02, 0x00, 0x08, 0x18, 0x12, 0x78, 0xc8, + 0x02, 0xdf, 0x01, 0x00, 0x00, 0x3f, 0x01, 0x3f, + 0x01, 0x00, 0x00, 0x05, 0x40, 0x01, 0xf0, 0x00} }, + {4, /* JPEG, 640x480 */ + {0x01, 0x22, 0x20, 0x0e, 0x00, 0xa2, 0x02, 0xf0, + 0x01, 0x02, 0x00, 0x08, 0x18, 0x12, 0x78, 0xc8, + 0x07, 0xe1, 0x01, 0xe1, 0x01, 0x3f, 0x01, 0x3f, + 0x01, 0x3f, 0x01, 0x05, 0x80, 0x02, 0xe0, 0x01} }, + }, + [SENSOR_LZ24BP] = { + {0, /* JPEG, 160x120 */ + {0x01, 0x1f, 0x20, 0x0e, 0x00, 0x9f, 0x02, 0xee, + 0x01, 0x02, 0x00, 0x08, 0x18, 0x12, 0x78, 0xc8, + 0x02, 0x8b, 0x00, 0x8b, 0x00, 0x41, 0x01, 0x41, + 0x01, 0x41, 0x01, 0x05, 0x40, 0x01, 0xf0, 0x00} }, + {2, /* JPEG, 320x240 */ + {0x01, 0x22, 0x20, 0x0e, 0x00, 0xa2, 0x02, 0xee, + 0x01, 0x02, 0x00, 0x08, 0x18, 0x12, 0x78, 0xc8, + 0x02, 0xdf, 0x01, 0x00, 0x00, 0x3f, 0x01, 0x3f, + 0x01, 0x00, 0x00, 0x05, 0x40, 0x01, 0xf0, 0x00} }, + {4, /* JPEG, 640x480 */ + {0x01, 0x22, 0x20, 0x0e, 0x00, 0xa2, 0x02, 0xf0, + 0x01, 0x02, 0x00, 0x08, 0x18, 0x12, 0x78, 0xc8, + 0x07, 0xe1, 0x01, 0xe1, 0x01, 0x3f, 0x01, 0x3f, + 0x01, 0x3f, 0x01, 0x05, 0x80, 0x02, 0xe0, 0x01} }, + }, + [SENSOR_MI0360] = { + {0, /* JPEG, 160x120 */ + {0x05, 0x3d, 0x20, 0x0b, 0x00, 0xbd, 0x02, 0x0b, + 0x02, 0x02, 0x00, 0x08, 0x18, 0x12, 0x78, 0xc8, + 0x02, 0x01, 0x01, 0x01, 0x01, 0x9f, 0x00, 0x9f, + 0x00, 0x9f, 0x01, 0x05, 0xa0, 0x00, 0x80, 0x00} }, + {2, /* JPEG, 320x240 */ + {0x01, 0x02, 0x20, 0x01, 0x20, 0x82, 0x02, 0xe1, +/*fixme 03 e3 */ + 0x01, 0x02, 0x00, 0x08, 0x18, 0x12, 0x78, 0xc8, + 0x02, 0xdf, 0x01, 0x00, 0x00, 0x3f, 0x01, 0x3f, + 0x01, 0x00, 0x00, 0x05, 0x40, 0x01, 0xf0, 0x00} }, + {4, /* JPEG, 640x480 */ + {0x01, 0x02, 0x20, 0x01, 0x20, 0x82, 0x02, 0xe3, + 0x01, 0x02, 0x00, 0x08, 0x18, 0x12, 0x78, 0xc8, + 0x07, 0xe1, 0x01, 0xe1, 0x01, 0x3f, 0x01, 0x3f, + 0x01, 0x3f, 0x01, 0x05, 0x80, 0x02, 0xe0, 0x01} }, + }, + [SENSOR_MT9V111] = { + {0, /* JPEG, 160x120 */ + {0x05, 0x3d, 0x20, 0x0b, 0x00, 0xbd, 0x02, 0x0b, + 0x02, 0x02, 0x00, 0x08, 0x18, 0x12, 0x78, 0xc8, + 0x02, 0x01, 0x01, 0x01, 0x01, 0x9f, 0x00, 0x9f, + 0x00, 0x9f, 0x01, 0x05, 0xa0, 0x00, 0x80, 0x00} }, + {2, /* JPEG, 320x240 */ + {0x01, 0x02, 0x20, 0x03, 0x20, 0x82, 0x02, 0xe3, + 0x01, 0x02, 0x00, 0x08, 0x18, 0x12, 0x78, 0xc8, + 0x02, 0xdf, 0x01, 0x00, 0x00, 0x3f, 0x01, 0x3f, + 0x01, 0x00, 0x00, 0x05, 0x40, 0x01, 0xf0, 0x00} }, + {4, /* JPEG, 640x480 */ + {0x01, 0x02, 0x20, 0x03, 0x20, 0x82, 0x02, 0xe3, + 0x01, 0x02, 0x00, 0x08, 0x18, 0x12, 0x78, 0xc8, + 0x07, 0xe1, 0x01, 0xe1, 0x01, 0x3f, 0x01, 0x3f, + 0x01, 0x3f, 0x01, 0x05, 0x80, 0x02, 0xe0, 0x01} }, + }, +}; + +struct sensor_s { + const char *name; + u8 i2c_addr; + u8 i2c_dum; + u8 gpio[5]; + u8 cmd_len; + const struct ucbus_write_cmd *cmd; +}; + +static const struct sensor_s sensor_tb[] = { + [SENSOR_ICX098BQ] = { + "icx098bp", + 0x00, 0x00, + {0, + SQ930_GPIO_DFL_I2C_SDA | SQ930_GPIO_DFL_I2C_SCL, + SQ930_GPIO_DFL_I2C_SDA, + 0, + SQ930_GPIO_RSTBAR + }, + 8, icx098bq_start_0 + }, + [SENSOR_LZ24BP] = { + "lz24bp", + 0x00, 0x00, + {0, + SQ930_GPIO_DFL_I2C_SDA | SQ930_GPIO_DFL_I2C_SCL, + SQ930_GPIO_DFL_I2C_SDA, + 0, + SQ930_GPIO_RSTBAR + }, + 8, lz24bp_start_0 + }, + [SENSOR_MI0360] = { + "mi0360", + 0x5d, 0x80, + {SQ930_GPIO_RSTBAR, + SQ930_GPIO_DFL_I2C_SDA | SQ930_GPIO_DFL_I2C_SCL, + SQ930_GPIO_DFL_I2C_SDA, + 0, + 0 + }, + 7, mi0360_start_0 + }, + [SENSOR_MT9V111] = { + "mt9v111", + 0x5c, 0x7f, + {SQ930_GPIO_RSTBAR, + SQ930_GPIO_DFL_I2C_SDA | SQ930_GPIO_DFL_I2C_SCL, + SQ930_GPIO_DFL_I2C_SDA, + 0, + 0 + }, + 7, mi0360_start_0 + }, + [SENSOR_OV7660] = { + "ov7660", + 0x21, 0x00, + {0, + SQ930_GPIO_DFL_I2C_SDA | SQ930_GPIO_DFL_I2C_SCL, + SQ930_GPIO_DFL_I2C_SDA, + 0, + SQ930_GPIO_RSTBAR + }, + 7, ov7660_start_0 + }, + [SENSOR_OV9630] = { + "ov9630", + 0x30, 0x00, + {0, + SQ930_GPIO_DFL_I2C_SDA | SQ930_GPIO_DFL_I2C_SCL, + SQ930_GPIO_DFL_I2C_SDA, + 0, + SQ930_GPIO_RSTBAR + }, + 7, ov9630_start_0 + }, +}; + +static void reg_r(struct gspca_dev *gspca_dev, + u16 value, int len) +{ + int ret; + + if (gspca_dev->usb_err < 0) + return; + ret = usb_control_msg(gspca_dev->dev, + usb_rcvctrlpipe(gspca_dev->dev, 0), + 0x0c, + USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE, + value, 0, gspca_dev->usb_buf, len, + 500); + if (ret < 0) { + PDEBUG(D_ERR, "reg_r %04x failed %d", value, ret); + gspca_dev->usb_err = ret; + } +} + +static void reg_w(struct gspca_dev *gspca_dev, u16 value, u16 index) +{ + int ret; + + if (gspca_dev->usb_err < 0) + return; + PDEBUG(D_USBO, "reg_w v: %04x i: %04x", value, index); + ret = usb_control_msg(gspca_dev->dev, + usb_sndctrlpipe(gspca_dev->dev, 0), + 0x0c, /* request */ + USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE, + value, index, NULL, 0, + 500); + msleep(30); + if (ret < 0) { + PDEBUG(D_ERR, "reg_w %04x %04x failed %d", value, index, ret); + gspca_dev->usb_err = ret; + } +} + +static void reg_wb(struct gspca_dev *gspca_dev, u16 value, u16 index, + const u8 *data, int len) +{ + int ret; + + if (gspca_dev->usb_err < 0) + return; + PDEBUG(D_USBO, "reg_wb v: %04x i: %04x %02x...%02x", + value, index, *data, data[len - 1]); + memcpy(gspca_dev->usb_buf, data, len); + ret = usb_control_msg(gspca_dev->dev, + usb_sndctrlpipe(gspca_dev->dev, 0), + 0x0c, /* request */ + USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE, + value, index, gspca_dev->usb_buf, len, + 1000); + msleep(30); + if (ret < 0) { + PDEBUG(D_ERR, "reg_wb %04x %04x failed %d", value, index, ret); + gspca_dev->usb_err = ret; + } +} + +static void i2c_write(struct sd *sd, + const struct i2c_write_cmd *cmd, + int ncmds) +{ + struct gspca_dev *gspca_dev = &sd->gspca_dev; + const struct sensor_s *sensor; + u16 val, idx; + u8 *buf; + int ret; + + if (gspca_dev->usb_err < 0) + return; + + sensor = &sensor_tb[sd->sensor]; + + val = (sensor->i2c_addr << 8) | SQ930_CTRL_I2C_IO; + idx = (cmd->val & 0xff00) | cmd->reg; + + buf = gspca_dev->usb_buf; + *buf++ = sensor->i2c_dum; + *buf++ = cmd->val; + + while (--ncmds > 0) { + cmd++; + *buf++ = cmd->reg; + *buf++ = cmd->val >> 8; + *buf++ = sensor->i2c_dum; + *buf++ = cmd->val; + } + + PDEBUG(D_USBO, "i2c_w v: %04x i: %04x %02x...%02x", + val, idx, gspca_dev->usb_buf[0], buf[-1]); + ret = usb_control_msg(gspca_dev->dev, + usb_sndctrlpipe(gspca_dev->dev, 0), + 0x0c, /* request */ + USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE, + val, idx, + gspca_dev->usb_buf, buf - gspca_dev->usb_buf, + 500); + if (ret < 0) { + PDEBUG(D_ERR, "i2c_write failed %d", ret); + gspca_dev->usb_err = ret; + } +} + +static void ucbus_write(struct gspca_dev *gspca_dev, + const struct ucbus_write_cmd *cmd, + int ncmds, + int batchsize) +{ + u8 *buf; + u16 val, idx; + int len, ret; + + if (gspca_dev->usb_err < 0) + return; + +#ifdef GSPCA_DEBUG + if ((batchsize - 1) * 3 > USB_BUF_SZ) { + err("Bug: usb_buf overflow"); + gspca_dev->usb_err = -ENOMEM; + return; + } +#endif + + for (;;) { + len = ncmds; + if (len > batchsize) + len = batchsize; + ncmds -= len; + + val = (cmd->bw_addr << 8) | SQ930_CTRL_UCBUS_IO; + idx = (cmd->bw_data << 8) | (cmd->bw_addr >> 8); + + buf = gspca_dev->usb_buf; + while (--len > 0) { + cmd++; + *buf++ = cmd->bw_addr; + *buf++ = cmd->bw_addr >> 8; + *buf++ = cmd->bw_data; + } + if (buf != gspca_dev->usb_buf) + PDEBUG(D_USBO, "ucbus v: %04x i: %04x %02x...%02x", + val, idx, + gspca_dev->usb_buf[0], buf[-1]); + else + PDEBUG(D_USBO, "ucbus v: %04x i: %04x", + val, idx); + ret = usb_control_msg(gspca_dev->dev, + usb_sndctrlpipe(gspca_dev->dev, 0), + 0x0c, /* request */ + USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE, + val, idx, + gspca_dev->usb_buf, buf - gspca_dev->usb_buf, + 500); + if (ret < 0) { + PDEBUG(D_ERR, "ucbus_write failed %d", ret); + gspca_dev->usb_err = ret; + return; + } + msleep(30); + if (ncmds <= 0) + break; + cmd++; + } +} + +static void gpio_set(struct sd *sd, u16 val, u16 mask) +{ + struct gspca_dev *gspca_dev = &sd->gspca_dev; + + if (mask & 0x00ff) { + sd->gpio[0] &= ~mask; + sd->gpio[0] |= val; + reg_w(gspca_dev, 0x0100 | SQ930_CTRL_GPIO, + ~sd->gpio[0] << 8); + } + mask >>= 8; + val >>= 8; + if (mask) { + sd->gpio[1] &= ~mask; + sd->gpio[1] |= val; + reg_w(gspca_dev, 0x0300 | SQ930_CTRL_GPIO, + ~sd->gpio[1] << 8); + } +} + +static void gpio_init(struct sd *sd, + const u8 *gpio) +{ + gpio_set(sd, *gpio++, 0x000f); + gpio_set(sd, *gpio++, 0x000f); + gpio_set(sd, *gpio++, 0x000f); + gpio_set(sd, *gpio++, 0x000f); + gpio_set(sd, *gpio, 0x000f); +} + +static void bridge_init(struct sd *sd) +{ + static const struct ucbus_write_cmd clkfreq_cmd = { + 0xf031, 0 /* SQ930_CLKFREQ_60MHZ */ + }; + + ucbus_write(&sd->gspca_dev, &clkfreq_cmd, 1, 1); + + gpio_set(sd, SQ930_GPIO_POWER, 0xff00); +} + +static void cmos_probe(struct gspca_dev *gspca_dev) +{ + struct sd *sd = (struct sd *) gspca_dev; + int i; + const struct sensor_s *sensor; + static const u8 probe_order[] = { +/* SENSOR_LZ24BP, (tested as ccd) */ + SENSOR_OV9630, + SENSOR_MI0360, + SENSOR_OV7660, + SENSOR_MT9V111, + }; + + for (i = 0; i < ARRAY_SIZE(probe_order); i++) { + sensor = &sensor_tb[probe_order[i]]; + ucbus_write(&sd->gspca_dev, sensor->cmd, sensor->cmd_len, 8); + gpio_init(sd, sensor->gpio); + msleep(100); + reg_r(gspca_dev, (sensor->i2c_addr << 8) | 0x001c, 1); + msleep(100); + if (gspca_dev->usb_buf[0] != 0) + break; + } + if (i >= ARRAY_SIZE(probe_order)) + PDEBUG(D_PROBE, "Unknown sensor"); + else + sd->sensor = probe_order[i]; +} + +static void mt9v111_init(struct gspca_dev *gspca_dev) +{ + int i, nwait; + static const u8 cmd_001b[] = { + 0x00, 0x3b, 0xf6, 0x01, 0x03, 0x02, 0x00, 0x00, + 0x00, 0x00, 0x00 + }; + static const u8 cmd_011b[][7] = { + {0x10, 0x01, 0x66, 0x08, 0x00, 0x00, 0x00}, + {0x01, 0x00, 0x1a, 0x04, 0x00, 0x00, 0x00}, + {0x20, 0x00, 0x10, 0x04, 0x00, 0x00, 0x00}, + {0x02, 0x01, 0xae, 0x01, 0x00, 0x00, 0x00}, + }; + + reg_wb(gspca_dev, 0x001b, 0x0000, cmd_001b, sizeof cmd_001b); + for (i = 0; i < ARRAY_SIZE(cmd_011b); i++) { + reg_wb(gspca_dev, 0x001b, 0x0000, cmd_011b[i], + ARRAY_SIZE(cmd_011b[0])); + msleep(400); + nwait = 20; + for (;;) { + reg_r(gspca_dev, 0x031b, 1); + if (gspca_dev->usb_buf[0] == 0 + || gspca_dev->usb_err != 0) + break; + if (--nwait < 0) { + PDEBUG(D_PROBE, "mt9v111_init timeout"); + gspca_dev->usb_err = -ETIME; + return; + } + msleep(50); + } + } +} + +static void global_init(struct sd *sd, int first_time) +{ + switch (sd->sensor) { + case SENSOR_ICX098BQ: + if (first_time) + ucbus_write(&sd->gspca_dev, + icx098bq_start_0, + 8, 8); + gpio_init(sd, sensor_tb[sd->sensor].gpio); + break; + case SENSOR_LZ24BP: + if (sd->type != Creative_live_motion) + gpio_set(sd, SQ930_GPIO_EXTRA1, 0x00ff); + else + gpio_set(sd, 0, 0x00ff); + msleep(50); + if (first_time) + ucbus_write(&sd->gspca_dev, + lz24bp_start_0, + 8, 8); + gpio_init(sd, sensor_tb[sd->sensor].gpio); + break; + case SENSOR_MI0360: + if (first_time) + ucbus_write(&sd->gspca_dev, + mi0360_start_0, + ARRAY_SIZE(mi0360_start_0), + 8); + gpio_init(sd, sensor_tb[sd->sensor].gpio); + gpio_set(sd, SQ930_GPIO_EXTRA2, SQ930_GPIO_EXTRA2); + break; + default: +/* case SENSOR_MT9V111: */ + if (first_time) + mt9v111_init(&sd->gspca_dev); + else + gpio_init(sd, sensor_tb[sd->sensor].gpio); + break; + } +} + +static void lz24bp_ppl(struct sd *sd, u16 ppl) +{ + struct ucbus_write_cmd cmds[2] = { + {0xf810, ppl >> 8}, + {0xf811, ppl} + }; + + ucbus_write(&sd->gspca_dev, cmds, ARRAY_SIZE(cmds), 2); +} + +static void setexposure(struct gspca_dev *gspca_dev) +{ + struct sd *sd = (struct sd *) gspca_dev; + int i, integclks, intstartclk, frameclks, min_frclk; + const struct sensor_s *sensor; + u16 cmd; + u8 buf[15]; + + integclks = sd->expo; + i = 0; + cmd = SQ930_CTRL_SET_EXPOSURE; + + switch (sd->sensor) { + case SENSOR_ICX098BQ: /* ccd */ + case SENSOR_LZ24BP: + min_frclk = sd->sensor == SENSOR_ICX098BQ ? 0x210 : 0x26f; + if (integclks >= min_frclk) { + intstartclk = 0; + frameclks = integclks; + } else { + intstartclk = min_frclk - integclks; + frameclks = min_frclk; + } + buf[i++] = intstartclk >> 8; + buf[i++] = intstartclk; + buf[i++] = frameclks >> 8; + buf[i++] = frameclks; + buf[i++] = sd->gain; + break; + default: /* cmos */ +/* case SENSOR_MI0360: */ +/* case SENSOR_MT9V111: */ + cmd |= 0x0100; + sensor = &sensor_tb[sd->sensor]; + buf[i++] = sensor->i2c_addr; /* i2c_slave_addr */ + buf[i++] = 0x08; /* 2 * ni2c */ + buf[i++] = 0x09; /* reg = shutter width */ + buf[i++] = integclks >> 8; /* val H */ + buf[i++] = sensor->i2c_dum; + buf[i++] = integclks; /* val L */ + buf[i++] = 0x35; /* reg = global gain */ + buf[i++] = 0x00; /* val H */ + buf[i++] = sensor->i2c_dum; + buf[i++] = sd->gain; /* val L */ + buf[i++] = 0x00; + buf[i++] = 0x00; + buf[i++] = 0x00; + buf[i++] = 0x00; + buf[i++] = 0x83; + break; + } + reg_wb(gspca_dev, cmd, 0, buf, i); +} + +/* This function is called at probe time just before sd_init */ +static int sd_config(struct gspca_dev *gspca_dev, + const struct usb_device_id *id) +{ + struct sd *sd = (struct sd *) gspca_dev; + struct cam *cam = &gspca_dev->cam; + + sd->sensor = id->driver_info >> 8; + sd->type = id->driver_info; + + cam->cam_mode = vga_mode; + cam->nmodes = ARRAY_SIZE(vga_mode); + + cam->bulk = 1; + cam->bulk_size = BULK_TRANSFER_LEN; +/* cam->bulk_nurbs = 2; fixme: if no setexpo sync */ + + sd->quality = QUALITY_DEF; + sd->gain = GAIN_DEF; + sd->expo = EXPO_DEF; + + return 0; +} + +/* this function is called at probe and resume time */ +static int sd_init(struct gspca_dev *gspca_dev) +{ + struct sd *sd = (struct sd *) gspca_dev; + + sd->gpio[0] = sd->gpio[1] = 0xff; /* force gpio rewrite */ + +/*fixme: is this needed for icx098bp and mi0360? + if (sd->sensor != SENSOR_LZ24BP) + reg_w(gspca_dev, SQ930_CTRL_RESET, 0x0000); + */ + + reg_r(gspca_dev, SQ930_CTRL_GET_DEV_INFO, 8); +/* it returns: + * 03 00 12 93 0b f6 c9 00 live! ultra + * 03 00 07 93 0b f6 ca 00 live! ultra for notebook + * 03 00 12 93 0b fe c8 00 Trust WB-3500T + * 02 00 06 93 0b fe c8 00 Joy-IT 318S + * 03 00 12 93 0b f6 cf 00 icam tracer - sensor icx098bq + * 02 00 12 93 0b fe cf 00 ProQ Motion Webcam + * + * byte + * 0: 02 = usb 1.0 (12Mbit) / 03 = usb2.0 (480Mbit) + * 1: 00 + * 2: 06 / 07 / 12 = mode webcam? firmware?? + * 3: 93 chip = 930b (930b or 930c) + * 4: 0b + * 5: f6 = cdd (icx098bq, lz24bp) / fe or de = cmos (i2c) (other sensors) + * 6: c8 / c9 / ca / cf = mode webcam?, sensor? webcam? + * 7: 00 + */ + PDEBUG(D_PROBE, "info: %02x %02x %02x %02x %02x %02x %02x %02x", + gspca_dev->usb_buf[0], + gspca_dev->usb_buf[1], + gspca_dev->usb_buf[2], + gspca_dev->usb_buf[3], + gspca_dev->usb_buf[4], + gspca_dev->usb_buf[5], + gspca_dev->usb_buf[6], + gspca_dev->usb_buf[7]); + + bridge_init(sd); + + if (sd->sensor == SENSOR_MI0360) { + + /* no sensor probe for icam tracer */ + if (gspca_dev->usb_buf[5] == 0xf6) { /* if CMOS */ + sd->sensor = SENSOR_ICX098BQ; + gspca_dev->cam.cam_mode = &vga_mode[1]; + gspca_dev->cam.nmodes = 1; /* only 320x240 */ + } else { + cmos_probe(gspca_dev); + } + } + + PDEBUG(D_PROBE, "Sensor %s", sensor_tb[sd->sensor].name); + + global_init(sd, 1); + return gspca_dev->usb_err; +} + +/* special function to create the quantization tables of the JPEG header */ +static void sd_jpeg_set_qual(u8 *jpeg_hdr, + int quality) +{ + int i, sc1, sc2; + + quality = quality_tb[quality]; /* convert to JPEG quality */ +/* + * approximative qualities for Y and U/V: + * quant = 0:94%/91% 1:91%/87% 2:82%/73% 3:69%/56% + * should have: + * quant = 0:94%/91% 1:91%/87.5% 2:81.5%/72% 3:69%/54.5% + */ + sc1 = 200 - quality * 2; + quality = quality * 7 / 5 - 40; /* UV quality */ + sc2 = 200 - quality * 2; + for (i = 0; i < 64; i++) { + jpeg_hdr[JPEG_QT0_OFFSET + i] = + (jpeg_head[JPEG_QT0_OFFSET + i] * sc1 + 50) / 100; + jpeg_hdr[JPEG_QT1_OFFSET + i] = + (jpeg_head[JPEG_QT1_OFFSET + i] * sc2 + 50) / 100; + } +} + +/* send the start/stop commands to the webcam */ +static void send_start(struct gspca_dev *gspca_dev) +{ + struct sd *sd = (struct sd *) gspca_dev; + const struct cap_s *cap; + int mode, quality; + + mode = gspca_dev->cam.cam_mode[gspca_dev->curr_mode].priv; + cap = &capconfig[sd->sensor][mode]; + quality = sd->quality; + reg_wb(gspca_dev, (quality << 12) + | 0x0a00 /* 900 for Bayer */ + | SQ930_CTRL_CAP_START, + 0x0500 /* a00 for Bayer */ + | cap->cc_sizeid, + cap->cc_bytes, 32); +}; +static void send_stop(struct gspca_dev *gspca_dev) +{ + reg_w(gspca_dev, SQ930_CTRL_CAP_STOP, 0); +}; + +/* function called at start time before URB creation */ +static int sd_isoc_init(struct gspca_dev *gspca_dev) +{ + struct sd *sd = (struct sd *) gspca_dev; + + gspca_dev->cam.bulk_nurbs = 1; /* there must be one URB only */ + sd->do_ctrl = 0; + return 0; +} + +/* start the capture */ +static int sd_start(struct gspca_dev *gspca_dev) +{ + struct sd *sd = (struct sd *) gspca_dev; + int mode; + + /* initialize the JPEG header */ + jpeg_define(sd->jpeg_hdr, gspca_dev->height, gspca_dev->width, + 0x21); /* JPEG 422 */ + sd_jpeg_set_qual(sd->jpeg_hdr, sd->quality); + + bridge_init(sd); + global_init(sd, 0); + msleep(100); + + switch (sd->sensor) { + case SENSOR_ICX098BQ: + ucbus_write(gspca_dev, icx098bq_start_0, + ARRAY_SIZE(icx098bq_start_0), + 8); + ucbus_write(gspca_dev, icx098bq_start_1, + ARRAY_SIZE(icx098bq_start_1), + 5); + ucbus_write(gspca_dev, icx098bq_start_2, + ARRAY_SIZE(icx098bq_start_2), + 6); + msleep(50); + + /* 1st start */ + send_start(gspca_dev); + gpio_set(sd, SQ930_GPIO_EXTRA2 | SQ930_GPIO_RSTBAR, 0x00ff); + msleep(70); + reg_w(gspca_dev, SQ930_CTRL_CAP_STOP, 0x0000); + gpio_set(sd, 0x7f, 0x00ff); + + /* 2nd start */ + send_start(gspca_dev); + gpio_set(sd, SQ930_GPIO_EXTRA2 | SQ930_GPIO_RSTBAR, 0x00ff); + goto out; + case SENSOR_LZ24BP: + ucbus_write(gspca_dev, lz24bp_start_0, + ARRAY_SIZE(lz24bp_start_0), + 8); + if (sd->type != Creative_live_motion) + ucbus_write(gspca_dev, lz24bp_start_1_gen, + ARRAY_SIZE(lz24bp_start_1_gen), + 5); + else + ucbus_write(gspca_dev, lz24bp_start_1_clm, + ARRAY_SIZE(lz24bp_start_1_clm), + 5); + ucbus_write(gspca_dev, lz24bp_start_2, + ARRAY_SIZE(lz24bp_start_2), + 6); + mode = gspca_dev->cam.cam_mode[gspca_dev->curr_mode].priv; + lz24bp_ppl(sd, mode == 2 ? 0x0564 : 0x0310); + msleep(10); + break; + case SENSOR_MI0360: + ucbus_write(gspca_dev, mi0360_start_0, + ARRAY_SIZE(mi0360_start_0), + 8); + i2c_write(sd, mi0360_init_23, + ARRAY_SIZE(mi0360_init_23)); + i2c_write(sd, mi0360_init_24, + ARRAY_SIZE(mi0360_init_24)); + i2c_write(sd, mi0360_init_25, + ARRAY_SIZE(mi0360_init_25)); + ucbus_write(gspca_dev, mi0360_start_1, + ARRAY_SIZE(mi0360_start_1), + 5); + i2c_write(sd, mi0360_start_2, + ARRAY_SIZE(mi0360_start_2)); + i2c_write(sd, mi0360_start_3, + ARRAY_SIZE(mi0360_start_3)); + + /* 1st start */ + send_start(gspca_dev); + msleep(60); + reg_w(gspca_dev, SQ930_CTRL_CAP_STOP, 0x0000); + + i2c_write(sd, + mi0360_start_4, ARRAY_SIZE(mi0360_start_4)); + break; + default: +/* case SENSOR_MT9V111: */ + ucbus_write(gspca_dev, mi0360_start_0, + ARRAY_SIZE(mi0360_start_0), + 8); + i2c_write(sd, mt9v111_init_0, + ARRAY_SIZE(mt9v111_init_0)); + i2c_write(sd, mt9v111_init_1, + ARRAY_SIZE(mt9v111_init_1)); + i2c_write(sd, mt9v111_init_2, + ARRAY_SIZE(mt9v111_init_2)); + ucbus_write(gspca_dev, mt9v111_start_1, + ARRAY_SIZE(mt9v111_start_1), + 8); + i2c_write(sd, mt9v111_init_3, + ARRAY_SIZE(mt9v111_init_3)); + i2c_write(sd, mt9v111_init_4, + ARRAY_SIZE(mt9v111_init_4)); + break; + } + + send_start(gspca_dev); +out: + msleep(1000); + + sd->eof_len = 0; /* init packet scan */ + + if (sd->sensor == SENSOR_MT9V111) + gpio_set(sd, SQ930_GPIO_DFL_LED, SQ930_GPIO_DFL_LED); + + sd->do_ctrl = 1; /* set the exposure */ + + return gspca_dev->usb_err; +} + +static void sd_stopN(struct gspca_dev *gspca_dev) +{ + struct sd *sd = (struct sd *) gspca_dev; + + if (sd->sensor == SENSOR_MT9V111) + gpio_set(sd, 0, SQ930_GPIO_DFL_LED); + send_stop(gspca_dev); +} + +/* function called when the application gets a new frame */ +/* It sets the exposure if required and restart the bulk transfer. */ +static void sd_dq_callback(struct gspca_dev *gspca_dev) +{ + struct sd *sd = (struct sd *) gspca_dev; + int ret; + + if (!sd->do_ctrl || gspca_dev->cam.bulk_nurbs != 0) + return; + sd->do_ctrl = 0; + + setexposure(gspca_dev); + + gspca_dev->cam.bulk_nurbs = 1; + ret = usb_submit_urb(gspca_dev->urb[0], GFP_ATOMIC); + if (ret < 0) + PDEBUG(D_ERR|D_PACK, "sd_dq_callback() err %d", ret); + + /* wait a little time, otherwise the webcam crashes */ + msleep(100); +} + +/* move a packet adding 0x00 after 0xff */ +static void add_packet(struct gspca_dev *gspca_dev, + u8 *data, + int len) +{ + int i; + + i = 0; + do { + if (data[i] == 0xff) { + gspca_frame_add(gspca_dev, INTER_PACKET, + data, i + 1); + len -= i; + data += i; + *data = 0x00; + i = 0; + } + } while (++i < len); + gspca_frame_add(gspca_dev, INTER_PACKET, data, len); +} + +/* end a frame and start a new one */ +static void eof_sof(struct gspca_dev *gspca_dev) +{ + struct sd *sd = (struct sd *) gspca_dev; + static const u8 ffd9[] = {0xff, 0xd9}; + + /* if control set, stop bulk transfer */ + if (sd->do_ctrl + && gspca_dev->last_packet_type == INTER_PACKET) + gspca_dev->cam.bulk_nurbs = 0; + gspca_frame_add(gspca_dev, LAST_PACKET, + ffd9, 2); + gspca_frame_add(gspca_dev, FIRST_PACKET, + sd->jpeg_hdr, JPEG_HDR_SZ); +} + +static void sd_pkt_scan(struct gspca_dev *gspca_dev, + u8 *data, /* isoc packet */ + int len) /* iso packet length */ +{ + struct sd *sd = (struct sd *) gspca_dev; + u8 *p; + int l; + + len -= 8; /* ignore last 8 bytes (00 00 55 aa 55 aa 00 00) */ + + /* + * the end/start of frame is indicated by + * 0x00 * 16 - 0xab * 8 + * aligned on 8 bytes boundary + */ + if (sd->eof_len != 0) { /* if 'abababab' in previous pkt */ + if (*((u32 *) data) == 0xabababab) { + /*fixme: should remove previous 0000ababab*/ + eof_sof(gspca_dev); + data += 4; + len -= 4; + } + sd->eof_len = 0; + } + p = data; + l = len; + for (;;) { + if (*((u32 *) p) == 0xabababab) { + if (l < 8) { /* (may be 4 only) */ + sd->eof_len = 1; + break; + } + if (*((u32 *) p + 1) == 0xabababab) { + add_packet(gspca_dev, data, p - data - 16); + /* remove previous zeros */ + eof_sof(gspca_dev); + p += 8; + l -= 8; + if (l <= 0) + return; + len = l; + data = p; + continue; + } + } + p += 4; + l -= 4; + if (l <= 0) + break; + } + add_packet(gspca_dev, data, len); +} + +static int sd_setgain(struct gspca_dev *gspca_dev, __s32 val) +{ + struct sd *sd = (struct sd *) gspca_dev; + + sd->gain = val; + if (gspca_dev->streaming) + sd->do_ctrl = 1; + return 0; +} + +static int sd_getgain(struct gspca_dev *gspca_dev, __s32 *val) +{ + struct sd *sd = (struct sd *) gspca_dev; + + *val = sd->gain; + return 0; +} +static int sd_setexpo(struct gspca_dev *gspca_dev, __s32 val) +{ + struct sd *sd = (struct sd *) gspca_dev; + + sd->expo = val; + if (gspca_dev->streaming) + sd->do_ctrl = 1; + return 0; +} + +static int sd_getexpo(struct gspca_dev *gspca_dev, __s32 *val) +{ + struct sd *sd = (struct sd *) gspca_dev; + + *val = sd->expo; + return 0; +} + +static int sd_set_jcomp(struct gspca_dev *gspca_dev, + struct v4l2_jpegcompression *jcomp) +{ + struct sd *sd = (struct sd *) gspca_dev; + int quality; + + if (jcomp->quality >= (QUAL_0 + QUAL_1) / 2) + quality = 0; + else if (jcomp->quality >= (QUAL_1 + QUAL_2) / 2) + quality = 1; + else if (jcomp->quality >= (QUAL_2 + QUAL_3) / 2) + quality = 2; + else + quality = 3; + + if (quality != sd->quality) { + sd->quality = quality; + if (gspca_dev->streaming) { + send_stop(gspca_dev); + sd_jpeg_set_qual(sd->jpeg_hdr, sd->quality); + msleep(70); + send_start(gspca_dev); + } + } + return gspca_dev->usb_err; +} + +static int sd_get_jcomp(struct gspca_dev *gspca_dev, + struct v4l2_jpegcompression *jcomp) +{ + struct sd *sd = (struct sd *) gspca_dev; + + memset(jcomp, 0, sizeof *jcomp); + jcomp->quality = quality_tb[sd->quality]; + jcomp->jpeg_markers = V4L2_JPEG_MARKER_DHT + | V4L2_JPEG_MARKER_DQT; + return 0; +} + +/* sub-driver description */ +static const struct sd_desc sd_desc = { + .name = MODULE_NAME, + .ctrls = sd_ctrls, + .nctrls = ARRAY_SIZE(sd_ctrls), + .config = sd_config, + .init = sd_init, + .isoc_init = sd_isoc_init, + .start = sd_start, + .stopN = sd_stopN, + .pkt_scan = sd_pkt_scan, + .dq_callback = sd_dq_callback, + .get_jcomp = sd_get_jcomp, + .set_jcomp = sd_set_jcomp, +}; + +/* Table of supported USB devices */ +#define ST(sensor, type) \ + .driver_info = (SENSOR_ ## sensor << 8) \ + | (type) +static const __devinitdata struct usb_device_id device_table[] = { + {USB_DEVICE(0x041e, 0x4038), ST(MI0360, 0)}, + {USB_DEVICE(0x041e, 0x403c), ST(LZ24BP, 0)}, + {USB_DEVICE(0x041e, 0x403d), ST(LZ24BP, 0)}, + {USB_DEVICE(0x041e, 0x4041), ST(LZ24BP, Creative_live_motion)}, + {USB_DEVICE(0x2770, 0x930b), ST(MI0360, 0)}, + {USB_DEVICE(0x2770, 0x930c), ST(MI0360, 0)}, + {} +}; +MODULE_DEVICE_TABLE(usb, device_table); + + +/* -- device connect -- */ +static int sd_probe(struct usb_interface *intf, + const struct usb_device_id *id) +{ + return gspca_dev_probe(intf, id, &sd_desc, sizeof(struct sd), + THIS_MODULE); +} + +static struct usb_driver sd_driver = { + .name = MODULE_NAME, + .id_table = device_table, + .probe = sd_probe, + .disconnect = gspca_disconnect, +#ifdef CONFIG_PM + .suspend = gspca_suspend, + .resume = gspca_resume, +#endif +}; + +/* -- module insert / remove -- */ +static int __init sd_mod_init(void) +{ + int ret; + + ret = usb_register(&sd_driver); + if (ret < 0) + return ret; + info("registered"); + return 0; +} +static void __exit sd_mod_exit(void) +{ + usb_deregister(&sd_driver); + info("deregistered"); +} + +module_init(sd_mod_init); +module_exit(sd_mod_exit); diff --git a/drivers/media/video/gspca/stk014.c b/drivers/media/video/gspca/stk014.c index 0fb534210a2..2aedf4b1bfa 100644 --- a/drivers/media/video/gspca/stk014.c +++ b/drivers/media/video/gspca/stk014.c @@ -36,11 +36,11 @@ struct sd { unsigned char colors; unsigned char lightfreq; u8 quality; -#define QUALITY_MIN 60 +#define QUALITY_MIN 70 #define QUALITY_MAX 95 -#define QUALITY_DEF 80 +#define QUALITY_DEF 88 - u8 *jpeg_hdr; + u8 jpeg_hdr[JPEG_HDR_SZ]; }; /* V4L2 controls supported by the driver */ @@ -337,9 +337,6 @@ static int sd_start(struct gspca_dev *gspca_dev) int ret, value; /* create the JPEG header */ - sd->jpeg_hdr = kmalloc(JPEG_HDR_SZ, GFP_KERNEL); - if (!sd->jpeg_hdr) - return -ENOMEM; jpeg_define(sd->jpeg_hdr, gspca_dev->height, gspca_dev->width, 0x22); /* JPEG 411 */ jpeg_set_qual(sd->jpeg_hdr, sd->quality); @@ -412,13 +409,6 @@ static void sd_stopN(struct gspca_dev *gspca_dev) PDEBUG(D_STREAM, "camera stopped"); } -static void sd_stop0(struct gspca_dev *gspca_dev) -{ - struct sd *sd = (struct sd *) gspca_dev; - - kfree(sd->jpeg_hdr); -} - static void sd_pkt_scan(struct gspca_dev *gspca_dev, u8 *data, /* isoc packet */ int len) /* iso packet length */ @@ -578,7 +568,6 @@ static const struct sd_desc sd_desc = { .init = sd_init, .start = sd_start, .stopN = sd_stopN, - .stop0 = sd_stop0, .pkt_scan = sd_pkt_scan, .querymenu = sd_querymenu, .get_jcomp = sd_get_jcomp, diff --git a/drivers/media/video/gspca/stv06xx/stv06xx.h b/drivers/media/video/gspca/stv06xx/stv06xx.h index 992ce530f13..053a27e3a40 100644 --- a/drivers/media/video/gspca/stv06xx/stv06xx.h +++ b/drivers/media/video/gspca/stv06xx/stv06xx.h @@ -30,6 +30,7 @@ #ifndef STV06XX_H_ #define STV06XX_H_ +#include <linux/slab.h> #include "gspca.h" #define MODULE_NAME "STV06xx" diff --git a/drivers/media/video/gspca/sunplus.c b/drivers/media/video/gspca/sunplus.c index 0c786e00ebc..9494f86b9a8 100644 --- a/drivers/media/video/gspca/sunplus.c +++ b/drivers/media/video/gspca/sunplus.c @@ -54,7 +54,7 @@ struct sd { #define MegapixV4 4 #define MegaImageVI 5 - u8 *jpeg_hdr; + u8 jpeg_hdr[JPEG_HDR_SZ]; }; /* V4L2 controls supported by the driver */ @@ -805,7 +805,7 @@ static int sd_init(struct gspca_dev *gspca_dev) /* Set AE AWB Banding Type 3-> 50Hz 2-> 60Hz */ spca504A_acknowledged_command(gspca_dev, 0x24, 8, 3, 0x9e, 1); - /* Twice sequencial need status 0xff->0x9e->0x9d */ + /* Twice sequential need status 0xff->0x9e->0x9d */ spca504A_acknowledged_command(gspca_dev, 0x24, 8, 3, 0x9e, 0); @@ -842,9 +842,6 @@ static int sd_start(struct gspca_dev *gspca_dev) int enable; /* create the JPEG header */ - sd->jpeg_hdr = kmalloc(JPEG_HDR_SZ, GFP_KERNEL); - if (!sd->jpeg_hdr) - return -ENOMEM; jpeg_define(sd->jpeg_hdr, gspca_dev->height, gspca_dev->width, 0x22); /* JPEG 411 */ jpeg_set_qual(sd->jpeg_hdr, sd->quality); @@ -880,7 +877,7 @@ static int sd_start(struct gspca_dev *gspca_dev) /* Set AE AWB Banding Type 3-> 50Hz 2-> 60Hz */ spca504A_acknowledged_command(gspca_dev, 0x24, 8, 3, 0x9e, 1); - /* Twice sequencial need status 0xff->0x9e->0x9d */ + /* Twice sequential need status 0xff->0x9e->0x9d */ spca504A_acknowledged_command(gspca_dev, 0x24, 8, 3, 0x9e, 0); spca504A_acknowledged_command(gspca_dev, 0x24, @@ -954,13 +951,6 @@ static void sd_stopN(struct gspca_dev *gspca_dev) } } -static void sd_stop0(struct gspca_dev *gspca_dev) -{ - struct sd *sd = (struct sd *) gspca_dev; - - kfree(sd->jpeg_hdr); -} - static void sd_pkt_scan(struct gspca_dev *gspca_dev, u8 *data, /* isoc packet */ int len) /* iso packet length */ @@ -1162,7 +1152,6 @@ static const struct sd_desc sd_desc = { .init = sd_init, .start = sd_start, .stopN = sd_stopN, - .stop0 = sd_stop0, .pkt_scan = sd_pkt_scan, .get_jcomp = sd_get_jcomp, .set_jcomp = sd_set_jcomp, diff --git a/drivers/media/video/gspca/t613.c b/drivers/media/video/gspca/t613.c index 63014372adb..2a0f12d55e4 100644 --- a/drivers/media/video/gspca/t613.c +++ b/drivers/media/video/gspca/t613.c @@ -1,5 +1,7 @@ /* - * V4L2 by Jean-Francois Moine <http://moinejf.free.fr> + * T613 subdriver + * + * Copyright (C) 2010 Jean-Francois Moine (http://moinejf.free.fr) * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -26,6 +28,7 @@ #define MODULE_NAME "t613" +#include <linux/slab.h> #include "gspca.h" #define V4L2_CID_EFFECTS (V4L2_CID_PRIVATE_BASE + 0) @@ -44,18 +47,20 @@ struct sd { u8 gamma; u8 sharpness; u8 freq; - u8 red_balance; /* split balance */ - u8 blue_balance; - u8 global_gain; /* aka gain */ - u8 whitebalance; /* set default r/g/b and activate */ + u8 red_gain; + u8 blue_gain; + u8 green_gain; + u8 awb; /* set default r/g/b and activate */ u8 mirror; u8 effect; u8 sensor; -#define SENSOR_OM6802 0 -#define SENSOR_OTHER 1 -#define SENSOR_TAS5130A 2 -#define SENSOR_LT168G 3 /* must verify if this is the actual model */ +enum { + SENSOR_OM6802, + SENSOR_OTHER, + SENSOR_TAS5130A, + SENSOR_LT168G, /* must verify if this is the actual model */ +} sensors; }; /* V4L2 controls supported by the driver */ @@ -74,24 +79,22 @@ static int sd_getsharpness(struct gspca_dev *gspca_dev, __s32 *val); static int sd_setfreq(struct gspca_dev *gspca_dev, __s32 val); static int sd_getfreq(struct gspca_dev *gspca_dev, __s32 *val); - -static int sd_setwhitebalance(struct gspca_dev *gspca_dev, __s32 val); -static int sd_getwhitebalance(struct gspca_dev *gspca_dev, __s32 *val); -static int sd_setblue_balance(struct gspca_dev *gspca_dev, __s32 val); -static int sd_getblue_balance(struct gspca_dev *gspca_dev, __s32 *val); -static int sd_setred_balance(struct gspca_dev *gspca_dev, __s32 val); -static int sd_getred_balance(struct gspca_dev *gspca_dev, __s32 *val); -static int sd_setglobal_gain(struct gspca_dev *gspca_dev, __s32 val); -static int sd_getglobal_gain(struct gspca_dev *gspca_dev, __s32 *val); - -static int sd_setflip(struct gspca_dev *gspca_dev, __s32 val); -static int sd_getflip(struct gspca_dev *gspca_dev, __s32 *val); +static int sd_setawb(struct gspca_dev *gspca_dev, __s32 val); +static int sd_getawb(struct gspca_dev *gspca_dev, __s32 *val); +static int sd_setblue_gain(struct gspca_dev *gspca_dev, __s32 val); +static int sd_getblue_gain(struct gspca_dev *gspca_dev, __s32 *val); +static int sd_setred_gain(struct gspca_dev *gspca_dev, __s32 val); +static int sd_getred_gain(struct gspca_dev *gspca_dev, __s32 *val); +static int sd_setgain(struct gspca_dev *gspca_dev, __s32 val); +static int sd_getgain(struct gspca_dev *gspca_dev, __s32 *val); + +static int sd_setmirror(struct gspca_dev *gspca_dev, __s32 val); +static int sd_getmirror(struct gspca_dev *gspca_dev, __s32 *val); static int sd_seteffect(struct gspca_dev *gspca_dev, __s32 val); static int sd_geteffect(struct gspca_dev *gspca_dev, __s32 *val); static int sd_querymenu(struct gspca_dev *gspca_dev, struct v4l2_querymenu *menu); - static const struct ctrl sd_ctrls[] = { { { @@ -177,8 +180,8 @@ static const struct ctrl sd_ctrls[] = { #define MIRROR_DEF 0 .default_value = MIRROR_DEF, }, - .set = sd_setflip, - .get = sd_getflip + .set = sd_setmirror, + .get = sd_getmirror }, { { @@ -198,15 +201,15 @@ static const struct ctrl sd_ctrls[] = { { .id = V4L2_CID_AUTO_WHITE_BALANCE, .type = V4L2_CTRL_TYPE_INTEGER, - .name = "White Balance", + .name = "Auto White Balance", .minimum = 0, .maximum = 1, .step = 1, -#define WHITE_BALANCE_DEF 0 - .default_value = WHITE_BALANCE_DEF, +#define AWB_DEF 0 + .default_value = AWB_DEF, }, - .set = sd_setwhitebalance, - .get = sd_getwhitebalance + .set = sd_setawb, + .get = sd_getawb }, { { @@ -244,11 +247,11 @@ static const struct ctrl sd_ctrls[] = { .minimum = 0x10, .maximum = 0x40, .step = 1, -#define BLUE_BALANCE_DEF 0x20 - .default_value = BLUE_BALANCE_DEF, +#define BLUE_GAIN_DEF 0x20 + .default_value = BLUE_GAIN_DEF, }, - .set = sd_setblue_balance, - .get = sd_getblue_balance, + .set = sd_setblue_gain, + .get = sd_getblue_gain, }, { { @@ -258,11 +261,11 @@ static const struct ctrl sd_ctrls[] = { .minimum = 0x10, .maximum = 0x40, .step = 1, -#define RED_BALANCE_DEF 0x20 - .default_value = RED_BALANCE_DEF, +#define RED_GAIN_DEF 0x20 + .default_value = RED_GAIN_DEF, }, - .set = sd_setred_balance, - .get = sd_getred_balance, + .set = sd_setred_gain, + .get = sd_getred_gain, }, { { @@ -272,24 +275,14 @@ static const struct ctrl sd_ctrls[] = { .minimum = 0x10, .maximum = 0x40, .step = 1, -#define global_gain_DEF 0x20 - .default_value = global_gain_DEF, +#define GAIN_DEF 0x20 + .default_value = GAIN_DEF, }, - .set = sd_setglobal_gain, - .get = sd_getglobal_gain, + .set = sd_setgain, + .get = sd_getgain, }, }; -static char *effects_control[] = { - "Normal", - "Emboss", /* disabled */ - "Monochrome", - "Sepia", - "Sketch", - "Sun Effect", /* disabled */ - "Negative", -}; - static const struct v4l2_pix_format vga_mode_t16[] = { {160, 120, V4L2_PIX_FMT_JPEG, V4L2_FIELD_NONE, .bytesperline = 160, @@ -327,7 +320,6 @@ struct additional_sensor_data { const u8 data1[10]; const u8 data2[9]; const u8 data3[9]; - const u8 data4[4]; const u8 data5[6]; const u8 stream[4]; }; @@ -375,7 +367,7 @@ static const u8 n4_lt168g[] = { }; static const struct additional_sensor_data sensor_data[] = { - { /* 0: OM6802 */ +[SENSOR_OM6802] = { .n3 = {0x61, 0x68, 0x65, 0x0a, 0x60, 0x04}, .n4 = n4_om6802, @@ -392,14 +384,12 @@ static const struct additional_sensor_data sensor_data[] = { .data3 = {0x80, 0xff, 0xff, 0x80, 0xff, 0xff, 0x80, 0xff, 0xff}, - .data4 = /*Freq (50/60Hz). Splitted for test purpose */ - {0x66, 0xca, 0xa8, 0xf0}, .data5 = /* this could be removed later */ {0x0c, 0x03, 0xab, 0x13, 0x81, 0x23}, .stream = {0x0b, 0x04, 0x0a, 0x78}, }, - { /* 1: OTHER */ +[SENSOR_OTHER] = { .n3 = {0x61, 0xc2, 0x65, 0x88, 0x60, 0x00}, .n4 = n4_other, @@ -416,14 +406,12 @@ static const struct additional_sensor_data sensor_data[] = { .data3 = {0x4e, 0x9c, 0xec, 0x40, 0x80, 0xc0, 0x48, 0x96, 0xd9}, - .data4 = - {0x66, 0x00, 0xa8, 0xa8}, .data5 = {0x0c, 0x03, 0xab, 0x29, 0x81, 0x69}, .stream = {0x0b, 0x04, 0x0a, 0x00}, }, - { /* 2: TAS5130A */ +[SENSOR_TAS5130A] = { .n3 = {0x61, 0xc2, 0x65, 0x0d, 0x60, 0x08}, .n4 = n4_tas5130a, @@ -440,14 +428,12 @@ static const struct additional_sensor_data sensor_data[] = { .data3 = {0x60, 0xa8, 0xe0, 0x60, 0xa8, 0xe0, 0x60, 0xa8, 0xe0}, - .data4 = /* Freq (50/60Hz). Splitted for test purpose */ - {0x66, 0x00, 0xa8, 0xe8}, .data5 = {0x0c, 0x03, 0xab, 0x10, 0x81, 0x20}, .stream = {0x0b, 0x04, 0x0a, 0x40}, }, - { /* 3: LT168G */ +[SENSOR_LT168G] = { .n3 = {0x61, 0xc2, 0x65, 0x68, 0x60, 0x00}, .n4 = n4_lt168g, .n4sz = sizeof n4_lt168g, @@ -460,7 +446,6 @@ static const struct additional_sensor_data sensor_data[] = { 0xff}, .data3 = {0x40, 0x80, 0xc0, 0x50, 0xa0, 0xf0, 0x53, 0xa6, 0xff}, - .data4 = {0x66, 0x41, 0xa8, 0xf0}, .data5 = {0x0c, 0x03, 0xab, 0x4b, 0x81, 0x2b}, .stream = {0x0b, 0x04, 0x0a, 0x28}, }, @@ -469,6 +454,15 @@ static const struct additional_sensor_data sensor_data[] = { #define MAX_EFFECTS 7 /* easily done by soft, this table could be removed, * i keep it here just in case */ +static char *effects_control[MAX_EFFECTS] = { + "Normal", + "Emboss", /* disabled */ + "Monochrome", + "Sepia", + "Sketch", + "Sun Effect", /* disabled */ + "Negative", +}; static const u8 effects_table[MAX_EFFECTS][6] = { {0xa8, 0xe8, 0xc6, 0xd2, 0xc0, 0x00}, /* Normal */ {0xa8, 0xc8, 0xc6, 0x52, 0xc0, 0x04}, /* Repujar */ @@ -480,40 +474,41 @@ static const u8 effects_table[MAX_EFFECTS][6] = { }; static const u8 gamma_table[GAMMA_MAX][17] = { - {0x00, 0x3e, 0x69, 0x85, 0x95, 0xa1, 0xae, 0xb9, /* 0 */ - 0xc2, 0xcb, 0xd4, 0xdb, 0xe3, 0xea, 0xf1, 0xf8, +/* gamma table from cam1690.ini */ + {0x00, 0x00, 0x01, 0x04, 0x08, 0x0e, 0x16, 0x21, /* 0 */ + 0x2e, 0x3d, 0x50, 0x65, 0x7d, 0x99, 0xb8, 0xdb, 0xff}, - {0x00, 0x33, 0x5a, 0x75, 0x85, 0x93, 0xa1, 0xad, /* 1 */ - 0xb7, 0xc2, 0xcb, 0xd4, 0xde, 0xe7, 0xf0, 0xf7, + {0x00, 0x01, 0x03, 0x08, 0x0e, 0x16, 0x21, 0x2d, /* 1 */ + 0x3c, 0x4d, 0x60, 0x75, 0x8d, 0xa6, 0xc2, 0xe1, 0xff}, - {0x00, 0x2f, 0x51, 0x6b, 0x7c, 0x8a, 0x99, 0xa6, /* 2 */ - 0xb1, 0xbc, 0xc6, 0xd0, 0xdb, 0xe4, 0xed, 0xf6, + {0x00, 0x01, 0x05, 0x0b, 0x12, 0x1c, 0x28, 0x35, /* 2 */ + 0x45, 0x56, 0x69, 0x7e, 0x95, 0xad, 0xc7, 0xe3, 0xff}, - {0x00, 0x29, 0x48, 0x60, 0x72, 0x81, 0x90, 0x9e, /* 3 */ - 0xaa, 0xb5, 0xbf, 0xcb, 0xd6, 0xe1, 0xeb, 0xf5, + {0x00, 0x02, 0x07, 0x0f, 0x18, 0x24, 0x30, 0x3f, /* 3 */ + 0x4f, 0x61, 0x73, 0x88, 0x9d, 0xb4, 0xcd, 0xe6, 0xff}, - {0x00, 0x23, 0x3f, 0x55, 0x68, 0x77, 0x86, 0x95, /* 4 */ - 0xa2, 0xad, 0xb9, 0xc6, 0xd2, 0xde, 0xe9, 0xf4, + {0x00, 0x04, 0x0B, 0x15, 0x20, 0x2d, 0x3b, 0x4a, /* 4 */ + 0x5b, 0x6c, 0x7f, 0x92, 0xa7, 0xbc, 0xd2, 0xe9, 0xff}, - {0x00, 0x1b, 0x33, 0x48, 0x59, 0x69, 0x79, 0x87, /* 5 */ - 0x96, 0xa3, 0xb1, 0xbe, 0xcc, 0xda, 0xe7, 0xf3, + {0x00, 0x07, 0x11, 0x15, 0x20, 0x2d, 0x48, 0x58, /* 5 */ + 0x68, 0x79, 0x8b, 0x9d, 0xb0, 0xc4, 0xd7, 0xec, 0xff}, - {0x00, 0x02, 0x10, 0x20, 0x32, 0x40, 0x57, 0x67, /* 6 */ + {0x00, 0x0c, 0x1a, 0x29, 0x38, 0x47, 0x57, 0x67, /* 6 */ 0x77, 0x88, 0x99, 0xaa, 0xbb, 0xcc, 0xdd, 0xee, 0xff}, - {0x00, 0x02, 0x14, 0x26, 0x38, 0x4a, 0x60, 0x70, /* 7 */ + {0x00, 0x10, 0x20, 0x30, 0x40, 0x50, 0x60, 0x70, /* 7 */ 0x80, 0x90, 0xa0, 0xb0, 0xc0, 0xd0, 0xe0, 0xf0, 0xff}, - {0x00, 0x10, 0x22, 0x35, 0x47, 0x5a, 0x69, 0x79, /* 8 */ - 0x88, 0x97, 0xa7, 0xb6, 0xc4, 0xd3, 0xe0, 0xf0, + {0x00, 0x15, 0x27, 0x38, 0x49, 0x59, 0x69, 0x79, /* 8 */ + 0x88, 0x97, 0xa7, 0xb6, 0xc4, 0xd3, 0xe2, 0xf0, 0xff}, - {0x00, 0x10, 0x26, 0x40, 0x54, 0x65, 0x75, 0x84, /* 9 */ - 0x93, 0xa1, 0xb0, 0xbd, 0xca, 0xd6, 0xe0, 0xf0, + {0x00, 0x1c, 0x30, 0x43, 0x54, 0x65, 0x75, 0x84, /* 9 */ + 0x93, 0xa1, 0xb0, 0xbd, 0xca, 0xd8, 0xe5, 0xf2, 0xff}, - {0x00, 0x18, 0x2b, 0x44, 0x60, 0x70, 0x80, 0x8e, /* 10 */ - 0x9c, 0xaa, 0xb7, 0xc4, 0xd0, 0xd8, 0xe2, 0xf0, + {0x00, 0x24, 0x3b, 0x4f, 0x60, 0x70, 0x80, 0x8e, /* 10 */ + 0x9c, 0xaa, 0xb7, 0xc4, 0xd0, 0xdc, 0xe8, 0xf3, 0xff}, - {0x00, 0x1a, 0x34, 0x52, 0x66, 0x7e, 0x8d, 0x9b, /* 11 */ + {0x00, 0x2a, 0x3c, 0x5d, 0x6e, 0x7e, 0x8d, 0x9b, /* 11 */ 0xa8, 0xb4, 0xc0, 0xcb, 0xd6, 0xe1, 0xeb, 0xf5, 0xff}, {0x00, 0x3f, 0x5a, 0x6e, 0x7f, 0x8e, 0x9c, 0xa8, /* 12 */ @@ -577,12 +572,11 @@ static void reg_w_buf(struct gspca_dev *gspca_dev, } else { u8 *tmpbuf; - tmpbuf = kmalloc(len, GFP_KERNEL); + tmpbuf = kmemdup(buffer, len, GFP_KERNEL); if (!tmpbuf) { err("Out of memory"); return; } - memcpy(tmpbuf, buffer, len); usb_control_msg(gspca_dev->dev, usb_sndctrlpipe(gspca_dev->dev, 0), 0, @@ -625,7 +619,6 @@ static void reg_w_ixbuf(struct gspca_dev *gspca_dev, kfree(tmpbuf); } -/* Reported as OM6802*/ static void om6802_sensor_init(struct gspca_dev *gspca_dev) { int i; @@ -703,12 +696,12 @@ static int sd_config(struct gspca_dev *gspca_dev, sd->autogain = AUTOGAIN_DEF; sd->mirror = MIRROR_DEF; sd->freq = FREQ_DEF; - sd->whitebalance = WHITE_BALANCE_DEF; + sd->awb = AWB_DEF; sd->sharpness = SHARPNESS_DEF; sd->effect = EFFECTS_DEF; - sd->red_balance = RED_BALANCE_DEF; - sd->blue_balance = BLUE_BALANCE_DEF; - sd->global_gain = global_gain_DEF; + sd->red_gain = RED_GAIN_DEF; + sd->blue_gain = BLUE_GAIN_DEF; + sd->green_gain = GAIN_DEF * 3 - RED_GAIN_DEF - BLUE_GAIN_DEF; return 0; } @@ -761,40 +754,59 @@ static void setgamma(struct gspca_dev *gspca_dev) reg_w_ixbuf(gspca_dev, 0x90, gamma_table[sd->gamma], sizeof gamma_table[0]); } -static void setglobalgain(struct gspca_dev *gspca_dev) -{ +static void setRGB(struct gspca_dev *gspca_dev) +{ struct sd *sd = (struct sd *) gspca_dev; - reg_w(gspca_dev, (sd->red_balance << 8) + 0x87); - reg_w(gspca_dev, (sd->blue_balance << 8) + 0x88); - reg_w(gspca_dev, (sd->global_gain << 8) + 0x89); + u8 all_gain_reg[6] = + {0x87, 0x00, 0x88, 0x00, 0x89, 0x00}; + + all_gain_reg[1] = sd->red_gain; + all_gain_reg[3] = sd->blue_gain; + all_gain_reg[5] = sd->green_gain; + reg_w_buf(gspca_dev, all_gain_reg, sizeof all_gain_reg); } -/* Generic fnc for r/b balance, exposure and whitebalance */ -static void setbalance(struct gspca_dev *gspca_dev) +/* Generic fnc for r/b balance, exposure and awb */ +static void setawb(struct gspca_dev *gspca_dev) { struct sd *sd = (struct sd *) gspca_dev; + u16 reg80; - /* on whitebalance leave defaults values */ - if (sd->whitebalance) { - reg_w(gspca_dev, 0x3c80); - } else { - reg_w(gspca_dev, 0x3880); + reg80 = (sensor_data[sd->sensor].reg80 << 8) | 0x80; + + /* on awb leave defaults values */ + if (!sd->awb) { /* shoud we wait here.. */ - /* update and reset 'global gain' with webcam parameters */ - sd->red_balance = reg_r(gspca_dev, 0x0087); - sd->blue_balance = reg_r(gspca_dev, 0x0088); - sd->global_gain = reg_r(gspca_dev, 0x0089); - setglobalgain(gspca_dev); + /* update and reset RGB gains with webcam values */ + sd->red_gain = reg_r(gspca_dev, 0x0087); + sd->blue_gain = reg_r(gspca_dev, 0x0088); + sd->green_gain = reg_r(gspca_dev, 0x0089); + reg80 &= ~0x0400; /* AWB off */ } - + reg_w(gspca_dev, reg80); + reg_w(gspca_dev, reg80); } - - -static void setwhitebalance(struct gspca_dev *gspca_dev) +static void init_gains(struct gspca_dev *gspca_dev) { - setbalance(gspca_dev); + struct sd *sd = (struct sd *) gspca_dev; + u16 reg80; + u8 all_gain_reg[8] = + {0x87, 0x00, 0x88, 0x00, 0x89, 0x00, 0x80, 0x00}; + + all_gain_reg[1] = sd->red_gain; + all_gain_reg[3] = sd->blue_gain; + all_gain_reg[5] = sd->green_gain; + reg80 = sensor_data[sd->sensor].reg80; + if (!sd->awb) + reg80 &= ~0x04; + all_gain_reg[7] = reg80; + reg_w_buf(gspca_dev, all_gain_reg, sizeof all_gain_reg); + + reg_w(gspca_dev, (sd->red_gain << 8) + 0x87); + reg_w(gspca_dev, (sd->blue_gain << 8) + 0x88); + reg_w(gspca_dev, (sd->green_gain << 8) + 0x89); } static void setsharpness(struct gspca_dev *gspca_dev) @@ -807,6 +819,38 @@ static void setsharpness(struct gspca_dev *gspca_dev) reg_w(gspca_dev, reg_to_write); } +static void setfreq(struct gspca_dev *gspca_dev) +{ + struct sd *sd = (struct sd *) gspca_dev; + u8 reg66; + u8 freq[4] = { 0x66, 0x00, 0xa8, 0xe8 }; + + switch (sd->sensor) { + case SENSOR_LT168G: + if (sd->freq != 0) + freq[3] = 0xa8; + reg66 = 0x41; + break; + case SENSOR_OM6802: + reg66 = 0xca; + break; + default: + reg66 = 0x40; + break; + } + switch (sd->freq) { + case 0: /* no flicker */ + freq[3] = 0xf0; + break; + case 2: /* 60Hz */ + reg66 &= ~0x40; + break; + } + freq[1] = reg66; + + reg_w_buf(gspca_dev, freq, sizeof freq); +} + /* this function is called at probe and resume time */ static int sd_init(struct gspca_dev *gspca_dev) { @@ -901,13 +945,9 @@ static int sd_init(struct gspca_dev *gspca_dev) setgamma(gspca_dev); setcolors(gspca_dev); setsharpness(gspca_dev); - setwhitebalance(gspca_dev); - - reg_w(gspca_dev, 0x2087); /* tied to white balance? */ - reg_w(gspca_dev, 0x2088); - reg_w(gspca_dev, 0x2089); + init_gains(gspca_dev); + setfreq(gspca_dev); - reg_w_buf(gspca_dev, sensor->data4, sizeof sensor->data4); reg_w_buf(gspca_dev, sensor->data5, sizeof sensor->data5); reg_w_buf(gspca_dev, sensor->nset8, sizeof sensor->nset8); reg_w_buf(gspca_dev, sensor->stream, sizeof sensor->stream); @@ -926,16 +966,16 @@ static int sd_init(struct gspca_dev *gspca_dev) return 0; } -static void setflip(struct gspca_dev *gspca_dev) +static void setmirror(struct gspca_dev *gspca_dev) { struct sd *sd = (struct sd *) gspca_dev; - u8 flipcmd[8] = + u8 hflipcmd[8] = {0x62, 0x07, 0x63, 0x03, 0x64, 0x00, 0x60, 0x09}; if (sd->mirror) - flipcmd[3] = 0x01; + hflipcmd[3] = 0x01; - reg_w_buf(gspca_dev, flipcmd, sizeof flipcmd); + reg_w_buf(gspca_dev, hflipcmd, sizeof hflipcmd); } static void seteffect(struct gspca_dev *gspca_dev) @@ -956,17 +996,6 @@ static void seteffect(struct gspca_dev *gspca_dev) reg_w(gspca_dev, 0xfaa6); } -static void setlightfreq(struct gspca_dev *gspca_dev) -{ - struct sd *sd = (struct sd *) gspca_dev; - u8 freq[4] = { 0x66, 0x40, 0xa8, 0xe8 }; - - if (sd->freq == 2) /* 60hz */ - freq[1] = 0x00; - - reg_w_buf(gspca_dev, freq, sizeof freq); -} - /* Is this really needed? * i added some module parameters for test with some users */ static void poll_sensor(struct gspca_dev *gspca_dev) @@ -979,9 +1008,7 @@ static void poll_sensor(struct gspca_dev *gspca_dev) static const u8 poll2[] = {0x67, 0x02, 0x68, 0x71, 0x69, 0x72, 0x72, 0xa9, 0x73, 0x02, 0x73, 0x02, 0x60, 0x14}; - static const u8 poll3[] = - {0x87, 0x3f, 0x88, 0x20, 0x89, 0x2d}; - static const u8 poll4[] = + static const u8 noise03[] = /* (some differences / ms-drv) */ {0xa6, 0x0a, 0xea, 0xcf, 0xbe, 0x26, 0xb1, 0x5f, 0xa1, 0xb1, 0xda, 0x6b, 0xdb, 0x98, 0xdf, 0x0c, 0xc2, 0x80, 0xc3, 0x10}; @@ -989,8 +1016,7 @@ static void poll_sensor(struct gspca_dev *gspca_dev) PDEBUG(D_STREAM, "[Sensor requires polling]"); reg_w_buf(gspca_dev, poll1, sizeof poll1); reg_w_buf(gspca_dev, poll2, sizeof poll2); - reg_w_buf(gspca_dev, poll3, sizeof poll3); - reg_w_buf(gspca_dev, poll4, sizeof poll4); + reg_w_buf(gspca_dev, noise03, sizeof noise03); } static int sd_start(struct gspca_dev *gspca_dev) @@ -1025,12 +1051,7 @@ static int sd_start(struct gspca_dev *gspca_dev) case SENSOR_OM6802: om6802_sensor_init(gspca_dev); break; - case SENSOR_LT168G: - break; - case SENSOR_OTHER: - break; - default: -/* case SENSOR_TAS5130A: */ + case SENSOR_TAS5130A: i = 0; for (;;) { reg_w_buf(gspca_dev, tas5130a_sensor_init[i], @@ -1047,7 +1068,7 @@ static int sd_start(struct gspca_dev *gspca_dev) break; } sensor = &sensor_data[sd->sensor]; - reg_w_buf(gspca_dev, sensor->data4, sizeof sensor->data4); + setfreq(gspca_dev); reg_r(gspca_dev, 0x0012); reg_w_buf(gspca_dev, t2, sizeof t2); reg_w_ixbuf(gspca_dev, 0xb3, t3, sizeof t3); @@ -1080,7 +1101,7 @@ static void sd_pkt_scan(struct gspca_dev *gspca_dev, u8 *data, /* isoc packet */ int len) /* iso packet length */ { - static u8 ffd9[] = { 0xff, 0xd9 }; + int pkt_type; if (data[0] == 0x5a) { /* Control Packet, after this came the header again, @@ -1090,84 +1111,88 @@ static void sd_pkt_scan(struct gspca_dev *gspca_dev, } data += 2; len -= 2; - if (data[0] == 0xff && data[1] == 0xd8) { - /* extra bytes....., could be processed too but would be - * a waste of time, right now leave the application and - * libjpeg do it for ourserlves.. */ - gspca_frame_add(gspca_dev, LAST_PACKET, - ffd9, 2); - gspca_frame_add(gspca_dev, FIRST_PACKET, data, len); - return; - } - - if (data[len - 2] == 0xff && data[len - 1] == 0xd9) { - /* Just in case, i have seen packets with the marker, - * other's do not include it... */ - len -= 2; - } - gspca_frame_add(gspca_dev, INTER_PACKET, data, len); + if (data[0] == 0xff && data[1] == 0xd8) + pkt_type = FIRST_PACKET; + else if (data[len - 2] == 0xff && data[len - 1] == 0xd9) + pkt_type = LAST_PACKET; + else + pkt_type = INTER_PACKET; + gspca_frame_add(gspca_dev, pkt_type, data, len); } - -static int sd_setblue_balance(struct gspca_dev *gspca_dev, __s32 val) +static int sd_setblue_gain(struct gspca_dev *gspca_dev, __s32 val) { struct sd *sd = (struct sd *) gspca_dev; - sd->blue_balance = val; + sd->blue_gain = val; if (gspca_dev->streaming) reg_w(gspca_dev, (val << 8) + 0x88); return 0; } -static int sd_getblue_balance(struct gspca_dev *gspca_dev, __s32 *val) +static int sd_getblue_gain(struct gspca_dev *gspca_dev, __s32 *val) { struct sd *sd = (struct sd *) gspca_dev; - *val = sd->blue_balance; + *val = sd->blue_gain; return 0; } -static int sd_setred_balance(struct gspca_dev *gspca_dev, __s32 val) +static int sd_setred_gain(struct gspca_dev *gspca_dev, __s32 val) { struct sd *sd = (struct sd *) gspca_dev; - sd->red_balance = val; + sd->red_gain = val; if (gspca_dev->streaming) reg_w(gspca_dev, (val << 8) + 0x87); return 0; } -static int sd_getred_balance(struct gspca_dev *gspca_dev, __s32 *val) +static int sd_getred_gain(struct gspca_dev *gspca_dev, __s32 *val) { struct sd *sd = (struct sd *) gspca_dev; - *val = sd->red_balance; + *val = sd->red_gain; return 0; } - - -static int sd_setglobal_gain(struct gspca_dev *gspca_dev, __s32 val) +static int sd_setgain(struct gspca_dev *gspca_dev, __s32 val) { struct sd *sd = (struct sd *) gspca_dev; + u16 psg, nsg; + + psg = sd->red_gain + sd->blue_gain + sd->green_gain; + nsg = val * 3; + sd->red_gain = sd->red_gain * nsg / psg; + if (sd->red_gain > 0x40) + sd->red_gain = 0x40; + else if (sd->red_gain < 0x10) + sd->red_gain = 0x10; + sd->blue_gain = sd->blue_gain * nsg / psg; + if (sd->blue_gain > 0x40) + sd->blue_gain = 0x40; + else if (sd->blue_gain < 0x10) + sd->blue_gain = 0x10; + sd->green_gain = sd->green_gain * nsg / psg; + if (sd->green_gain > 0x40) + sd->green_gain = 0x40; + else if (sd->green_gain < 0x10) + sd->green_gain = 0x10; - sd->global_gain = val; if (gspca_dev->streaming) - setglobalgain(gspca_dev); - + setRGB(gspca_dev); return 0; } -static int sd_getglobal_gain(struct gspca_dev *gspca_dev, __s32 *val) +static int sd_getgain(struct gspca_dev *gspca_dev, __s32 *val) { struct sd *sd = (struct sd *) gspca_dev; - *val = sd->global_gain; + *val = (sd->red_gain + sd->blue_gain + sd->green_gain) / 3; return 0; } - static int sd_setbrightness(struct gspca_dev *gspca_dev, __s32 val) { struct sd *sd = (struct sd *) gspca_dev; @@ -1186,35 +1211,35 @@ static int sd_getbrightness(struct gspca_dev *gspca_dev, __s32 *val) return *val; } -static int sd_setwhitebalance(struct gspca_dev *gspca_dev, __s32 val) +static int sd_setawb(struct gspca_dev *gspca_dev, __s32 val) { struct sd *sd = (struct sd *) gspca_dev; - sd->whitebalance = val; + sd->awb = val; if (gspca_dev->streaming) - setwhitebalance(gspca_dev); + setawb(gspca_dev); return 0; } -static int sd_getwhitebalance(struct gspca_dev *gspca_dev, __s32 *val) +static int sd_getawb(struct gspca_dev *gspca_dev, __s32 *val) { struct sd *sd = (struct sd *) gspca_dev; - *val = sd->whitebalance; + *val = sd->awb; return *val; } -static int sd_setflip(struct gspca_dev *gspca_dev, __s32 val) +static int sd_setmirror(struct gspca_dev *gspca_dev, __s32 val) { struct sd *sd = (struct sd *) gspca_dev; sd->mirror = val; if (gspca_dev->streaming) - setflip(gspca_dev); + setmirror(gspca_dev); return 0; } -static int sd_getflip(struct gspca_dev *gspca_dev, __s32 *val) +static int sd_getmirror(struct gspca_dev *gspca_dev, __s32 *val) { struct sd *sd = (struct sd *) gspca_dev; @@ -1300,7 +1325,7 @@ static int sd_setfreq(struct gspca_dev *gspca_dev, __s32 val) sd->freq = val; if (gspca_dev->streaming) - setlightfreq(gspca_dev); + setfreq(gspca_dev); return 0; } @@ -1368,7 +1393,8 @@ static int sd_querymenu(struct gspca_dev *gspca_dev, case V4L2_CID_EFFECTS: if ((unsigned) menu->index < ARRAY_SIZE(effects_control)) { strncpy((char *) menu->name, - effects_control[menu->index], 32); + effects_control[menu->index], + sizeof menu->name); return 0; } break; diff --git a/drivers/media/video/gspca/tv8532.c b/drivers/media/video/gspca/tv8532.c index c7b6eb1e04d..d9c5bf3449d 100644 --- a/drivers/media/video/gspca/tv8532.c +++ b/drivers/media/video/gspca/tv8532.c @@ -30,29 +30,46 @@ MODULE_LICENSE("GPL"); struct sd { struct gspca_dev gspca_dev; /* !! must be the first item */ - __u16 brightness; + __u16 exposure; + __u16 gain; __u8 packet; }; /* V4L2 controls supported by the driver */ -static int sd_setbrightness(struct gspca_dev *gspca_dev, __s32 val); -static int sd_getbrightness(struct gspca_dev *gspca_dev, __s32 *val); +static int sd_setexposure(struct gspca_dev *gspca_dev, __s32 val); +static int sd_getexposure(struct gspca_dev *gspca_dev, __s32 *val); +static int sd_setgain(struct gspca_dev *gspca_dev, __s32 val); +static int sd_getgain(struct gspca_dev *gspca_dev, __s32 *val); static const struct ctrl sd_ctrls[] = { { { - .id = V4L2_CID_BRIGHTNESS, + .id = V4L2_CID_EXPOSURE, .type = V4L2_CTRL_TYPE_INTEGER, - .name = "Brightness", + .name = "Exposure", .minimum = 1, - .maximum = 0x15f, /* = 352 - 1 */ + .maximum = 0x18f, .step = 1, -#define BRIGHTNESS_DEF 0x14c - .default_value = BRIGHTNESS_DEF, +#define EXPOSURE_DEF 0x18f + .default_value = EXPOSURE_DEF, }, - .set = sd_setbrightness, - .get = sd_getbrightness, + .set = sd_setexposure, + .get = sd_getexposure, + }, + { + { + .id = V4L2_CID_GAIN, + .type = V4L2_CTRL_TYPE_INTEGER, + .name = "Gain", + .minimum = 0, + .maximum = 0x7ff, + .step = 1, +#define GAIN_DEF 0x100 + .default_value = GAIN_DEF, + }, + .set = sd_setgain, + .get = sd_getgain, }, }; @@ -92,6 +109,14 @@ static const struct v4l2_pix_format sif_mode[] = { #define R14_AD_ROW_BEGINL 0x14 #define R15_AD_ROWBEGINH 0x15 #define R1C_AD_EXPOSE_TIMEL 0x1c +#define R20_GAIN_G1L 0x20 +#define R21_GAIN_G1H 0x21 +#define R22_GAIN_RL 0x22 +#define R23_GAIN_RH 0x23 +#define R24_GAIN_BL 0x24 +#define R25_GAIN_BH 0x25 +#define R26_GAIN_G2L 0x26 +#define R27_GAIN_G2H 0x27 #define R28_QUANT 0x28 #define R29_LINE 0x29 #define R2C_POLARITY 0x2c @@ -129,18 +154,6 @@ static const u8 eeprom_data[][3] = { {0x05, 0x09, 0xf1}, }; -static int reg_r(struct gspca_dev *gspca_dev, - __u16 index) -{ - usb_control_msg(gspca_dev->dev, - usb_rcvctrlpipe(gspca_dev->dev, 0), - 0x03, - USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE, - 0, /* value */ - index, gspca_dev->usb_buf, 1, - 500); - return gspca_dev->usb_buf[0]; -} /* write 1 byte */ static void reg_w1(struct gspca_dev *gspca_dev, @@ -183,7 +196,6 @@ static void tv_8532WriteEEprom(struct gspca_dev *gspca_dev) } reg_w1(gspca_dev, R07_TABLE_LEN, i); reg_w1(gspca_dev, R01_TIMING_CONTROL_LOW, CMD_EEprom_Close); - msleep(10); } /* this function is called at probe time */ @@ -197,53 +209,13 @@ static int sd_config(struct gspca_dev *gspca_dev, cam->cam_mode = sif_mode; cam->nmodes = ARRAY_SIZE(sif_mode); - sd->brightness = BRIGHTNESS_DEF; + sd->exposure = EXPOSURE_DEF; + sd->gain = GAIN_DEF; return 0; } -static void tv_8532ReadRegisters(struct gspca_dev *gspca_dev) -{ - int i; - static u8 reg_tb[] = { - R0C_AD_WIDTHL, - R0D_AD_WIDTHH, - R28_QUANT, - R29_LINE, - R2C_POLARITY, - R2D_POINT, - R2E_POINTH, - R2F_POINTB, - R30_POINTBH, - R2A_HIGH_BUDGET, - R2B_LOW_BUDGET, - R34_VID, - R35_VIDH, - R36_PID, - R37_PIDH, - R83_AD_IDH, - R10_AD_COL_BEGINL, - R11_AD_COL_BEGINH, - R14_AD_ROW_BEGINL, - R15_AD_ROWBEGINH, - 0 - }; - - i = 0; - do { - reg_r(gspca_dev, reg_tb[i]); - i++; - } while (reg_tb[i] != 0); -} - static void tv_8532_setReg(struct gspca_dev *gspca_dev) { - reg_w1(gspca_dev, R10_AD_COL_BEGINL, 0x44); - /* begin active line */ - reg_w1(gspca_dev, R11_AD_COL_BEGINH, 0x00); - /* mirror and digital gain */ - reg_w1(gspca_dev, R00_PART_CONTROL, LATENT_CHANGE | EXPO_CHANGE); - /* = 0x84 */ - reg_w1(gspca_dev, R3B_Test3, 0x0a); /* Test0Sel = 10 */ /******************************************************/ reg_w1(gspca_dev, R0E_AD_HEIGHTL, 0x90); @@ -255,100 +227,43 @@ static void tv_8532_setReg(struct gspca_dev *gspca_dev) /* mirror and digital gain */ reg_w1(gspca_dev, R14_AD_ROW_BEGINL, 0x0a); - reg_w1(gspca_dev, R91_AD_SLOPEREG, 0x00); reg_w1(gspca_dev, R94_AD_BITCONTROL, 0x02); - - reg_w1(gspca_dev, R01_TIMING_CONTROL_LOW, CMD_EEprom_Close); - reg_w1(gspca_dev, R91_AD_SLOPEREG, 0x00); reg_w1(gspca_dev, R00_PART_CONTROL, LATENT_CHANGE | EXPO_CHANGE); /* = 0x84 */ } -static void tv_8532_PollReg(struct gspca_dev *gspca_dev) -{ - int i; - - /* strange polling from tgc */ - for (i = 0; i < 10; i++) { - reg_w1(gspca_dev, R2C_POLARITY, 0x10); - reg_w1(gspca_dev, R00_PART_CONTROL, - LATENT_CHANGE | EXPO_CHANGE); - reg_w1(gspca_dev, R31_UPD, 0x01); - } -} - /* this function is called at probe and resume time */ static int sd_init(struct gspca_dev *gspca_dev) { tv_8532WriteEEprom(gspca_dev); - reg_w1(gspca_dev, R91_AD_SLOPEREG, 0x32); /* slope begin 1,7V, - * slope rate 2 */ - reg_w1(gspca_dev, R94_AD_BITCONTROL, 0x00); - tv_8532ReadRegisters(gspca_dev); - reg_w1(gspca_dev, R3B_Test3, 0x0b); - reg_w2(gspca_dev, R0E_AD_HEIGHTL, 0x0190); - reg_w2(gspca_dev, R1C_AD_EXPOSE_TIMEL, 0x018f); - reg_w1(gspca_dev, R0C_AD_WIDTHL, 0xe8); - reg_w1(gspca_dev, R0D_AD_WIDTHH, 0x03); - - /*******************************************************************/ - reg_w1(gspca_dev, R28_QUANT, 0x90); - /* no compress - fixed Q - quant 0 */ - reg_w1(gspca_dev, R29_LINE, 0x81); - /* 0x84; // CIF | 4 packet 0x29 */ - - /************************************************/ - reg_w1(gspca_dev, R2C_POLARITY, 0x10); - /* 0x48; //0x08; 0x2c */ - reg_w1(gspca_dev, R2D_POINT, 0x14); - /* 0x38; 0x2d */ - reg_w1(gspca_dev, R2E_POINTH, 0x01); - /* 0x04; 0x2e */ - reg_w1(gspca_dev, R2F_POINTB, 0x12); - /* 0x04; 0x2f */ - reg_w1(gspca_dev, R30_POINTBH, 0x01); - /* 0x04; 0x30 */ - reg_w1(gspca_dev, R00_PART_CONTROL, LATENT_CHANGE | EXPO_CHANGE); - /* 0x00<-0x84 */ - /*************************************************/ - reg_w1(gspca_dev, R31_UPD, 0x01); /* update registers */ - msleep(200); - reg_w1(gspca_dev, R31_UPD, 0x00); /* end update */ - /*************************************************/ - tv_8532_setReg(gspca_dev); - /*************************************************/ - reg_w1(gspca_dev, R3B_Test3, 0x0b); /* Test0Sel = 11 = GPIO */ - /*************************************************/ - tv_8532_setReg(gspca_dev); - /*************************************************/ - tv_8532_PollReg(gspca_dev); return 0; } -static void setbrightness(struct gspca_dev *gspca_dev) +static void setexposure(struct gspca_dev *gspca_dev) { struct sd *sd = (struct sd *) gspca_dev; - reg_w2(gspca_dev, R1C_AD_EXPOSE_TIMEL, sd->brightness); + reg_w2(gspca_dev, R1C_AD_EXPOSE_TIMEL, sd->exposure); reg_w1(gspca_dev, R00_PART_CONTROL, LATENT_CHANGE | EXPO_CHANGE); /* 0x84 */ } -/* -- start the camera -- */ -static int sd_start(struct gspca_dev *gspca_dev) +static void setgain(struct gspca_dev *gspca_dev) { struct sd *sd = (struct sd *) gspca_dev; - reg_w1(gspca_dev, R91_AD_SLOPEREG, 0x32); /* slope begin 1,7V, - * slope rate 2 */ - reg_w1(gspca_dev, R94_AD_BITCONTROL, 0x00); - tv_8532ReadRegisters(gspca_dev); - reg_w1(gspca_dev, R3B_Test3, 0x0b); + reg_w2(gspca_dev, R20_GAIN_G1L, sd->gain); + reg_w2(gspca_dev, R22_GAIN_RL, sd->gain); + reg_w2(gspca_dev, R24_GAIN_BL, sd->gain); + reg_w2(gspca_dev, R26_GAIN_G2L, sd->gain); +} - reg_w2(gspca_dev, R0E_AD_HEIGHTL, 0x0190); - setbrightness(gspca_dev); +/* -- start the camera -- */ +static int sd_start(struct gspca_dev *gspca_dev) +{ + struct sd *sd = (struct sd *) gspca_dev; reg_w1(gspca_dev, R0C_AD_WIDTHL, 0xe8); /* 0x20; 0x0c */ reg_w1(gspca_dev, R0D_AD_WIDTHH, 0x03); @@ -371,19 +286,15 @@ static int sd_start(struct gspca_dev *gspca_dev) reg_w1(gspca_dev, R2E_POINTH, 0x01); reg_w1(gspca_dev, R2F_POINTB, 0x12); reg_w1(gspca_dev, R30_POINTBH, 0x01); - reg_w1(gspca_dev, R00_PART_CONTROL, LATENT_CHANGE | EXPO_CHANGE); + + tv_8532_setReg(gspca_dev); + + setexposure(gspca_dev); + setgain(gspca_dev); + /************************************************/ reg_w1(gspca_dev, R31_UPD, 0x01); /* update registers */ msleep(200); - reg_w1(gspca_dev, R31_UPD, 0x00); /* end update */ - /************************************************/ - tv_8532_setReg(gspca_dev); - /************************************************/ - reg_w1(gspca_dev, R3B_Test3, 0x0b); /* Test0Sel = 11 = GPIO */ - /************************************************/ - tv_8532_setReg(gspca_dev); - /************************************************/ - tv_8532_PollReg(gspca_dev); reg_w1(gspca_dev, R31_UPD, 0x00); /* end update */ gspca_dev->empty_packet = 0; /* check the empty packets */ @@ -428,21 +339,39 @@ static void sd_pkt_scan(struct gspca_dev *gspca_dev, data + gspca_dev->width + 5, gspca_dev->width); } -static int sd_setbrightness(struct gspca_dev *gspca_dev, __s32 val) +static int sd_setexposure(struct gspca_dev *gspca_dev, __s32 val) +{ + struct sd *sd = (struct sd *) gspca_dev; + + sd->exposure = val; + if (gspca_dev->streaming) + setexposure(gspca_dev); + return 0; +} + +static int sd_getexposure(struct gspca_dev *gspca_dev, __s32 *val) +{ + struct sd *sd = (struct sd *) gspca_dev; + + *val = sd->exposure; + return 0; +} + +static int sd_setgain(struct gspca_dev *gspca_dev, __s32 val) { struct sd *sd = (struct sd *) gspca_dev; - sd->brightness = val; + sd->gain = val; if (gspca_dev->streaming) - setbrightness(gspca_dev); + setgain(gspca_dev); return 0; } -static int sd_getbrightness(struct gspca_dev *gspca_dev, __s32 *val) +static int sd_getgain(struct gspca_dev *gspca_dev, __s32 *val) { struct sd *sd = (struct sd *) gspca_dev; - *val = sd->brightness; + *val = sd->gain; return 0; } diff --git a/drivers/media/video/gspca/vc032x.c b/drivers/media/video/gspca/vc032x.c index 732c3dfe46f..031266a4081 100644 --- a/drivers/media/video/gspca/vc032x.c +++ b/drivers/media/video/gspca/vc032x.c @@ -2748,11 +2748,11 @@ static const u8 poxxxx_init_common[][4] = { {0xb3, 0x04, 0x15, 0xcc}, {0xb3, 0x20, 0x00, 0xcc}, {0xb3, 0x21, 0x00, 0xcc}, - {0xb3, 0x22, 0x04, 0xcc}, + {0xb3, 0x22, 0x04, 0xcc}, /* sensor height = 1024 */ {0xb3, 0x23, 0x00, 0xcc}, {0xb3, 0x14, 0x00, 0xcc}, {0xb3, 0x15, 0x00, 0xcc}, - {0xb3, 0x16, 0x04, 0xcc}, + {0xb3, 0x16, 0x04, 0xcc}, /* sensor width = 1280 */ {0xb3, 0x17, 0xff, 0xcc}, {0xb3, 0x2c, 0x03, 0xcc}, {0xb3, 0x2d, 0x56, 0xcc}, @@ -2919,7 +2919,7 @@ static const u8 poxxxx_initVGA[][4] = { {0x00, 0x20, 0x11, 0xaa}, {0x00, 0x33, 0x38, 0xaa}, {0x00, 0xbb, 0x0d, 0xaa}, - {0xb3, 0x22, 0x01, 0xcc}, + {0xb3, 0x22, 0x01, 0xcc}, /* change to 640x480 */ {0xb3, 0x23, 0xe0, 0xcc}, {0xb3, 0x16, 0x02, 0xcc}, {0xb3, 0x17, 0x7f, 0xcc}, @@ -2935,7 +2935,7 @@ static const u8 poxxxx_initQVGA[][4] = { {0x00, 0x20, 0x33, 0xaa}, {0x00, 0x33, 0x38, 0xaa}, {0x00, 0xbb, 0x0d, 0xaa}, - {0xb3, 0x22, 0x00, 0xcc}, + {0xb3, 0x22, 0x00, 0xcc}, /* change to 320x240 */ {0xb3, 0x23, 0xf0, 0xcc}, {0xb3, 0x16, 0x01, 0xcc}, {0xb3, 0x17, 0x3f, 0xcc}, @@ -3068,37 +3068,84 @@ static const struct sensor_info vc0323_probe_data[] = { }; /* read 'len' bytes in gspca_dev->usb_buf */ -static void reg_r(struct gspca_dev *gspca_dev, +static void reg_r_i(struct gspca_dev *gspca_dev, u16 req, u16 index, u16 len) { - usb_control_msg(gspca_dev->dev, + int ret; + + if (gspca_dev->usb_err < 0) + return; + ret = usb_control_msg(gspca_dev->dev, usb_rcvctrlpipe(gspca_dev->dev, 0), req, USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE, 1, /* value */ index, gspca_dev->usb_buf, len, 500); + if (ret < 0) { + PDEBUG(D_ERR, "reg_r err %d", ret); + gspca_dev->usb_err = ret; + } +} +static void reg_r(struct gspca_dev *gspca_dev, + u16 req, + u16 index, + u16 len) +{ + reg_r_i(gspca_dev, req, index, len); +#ifdef GSPCA_DEBUG + if (gspca_dev->usb_err < 0) + return; + if (len == 1) + PDEBUG(D_USBI, "GET %02x 0001 %04x %02x", req, index, + gspca_dev->usb_buf[0]); + else + PDEBUG(D_USBI, "GET %02x 0001 %04x %02x %02x %02x", + req, index, + gspca_dev->usb_buf[0], + gspca_dev->usb_buf[1], + gspca_dev->usb_buf[2]); +#endif } -static void reg_w(struct usb_device *dev, +static void reg_w_i(struct gspca_dev *gspca_dev, u16 req, u16 value, u16 index) { - usb_control_msg(dev, - usb_sndctrlpipe(dev, 0), + int ret; + + if (gspca_dev->usb_err < 0) + return; + ret = usb_control_msg(gspca_dev->dev, + usb_sndctrlpipe(gspca_dev->dev, 0), req, USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE, value, index, NULL, 0, 500); + if (ret < 0) { + PDEBUG(D_ERR, "reg_w err %d", ret); + gspca_dev->usb_err = ret; + } +} +static void reg_w(struct gspca_dev *gspca_dev, + u16 req, + u16 value, + u16 index) +{ +#ifdef GSPCA_DEBUG + if (gspca_dev->usb_err < 0) + return; + PDEBUG(D_USBO, "SET %02x %04x %04x", req, value, index); +#endif + reg_w_i(gspca_dev, req, value, index); } static u16 read_sensor_register(struct gspca_dev *gspca_dev, u16 address) { - struct usb_device *dev = gspca_dev->dev; u8 ldata, mdata, hdata; int retry = 50; @@ -3108,8 +3155,8 @@ static u16 read_sensor_register(struct gspca_dev *gspca_dev, gspca_dev->usb_buf[0]); return 0; } - reg_w(dev, 0xa0, address, 0xb33a); - reg_w(dev, 0xa0, 0x02, 0xb339); + reg_w(gspca_dev, 0xa0, address, 0xb33a); + reg_w(gspca_dev, 0xa0, 0x02, 0xb339); do { reg_r(gspca_dev, 0xa1, 0xb33b, 1); @@ -3136,15 +3183,15 @@ static u16 read_sensor_register(struct gspca_dev *gspca_dev, static int vc032x_probe_sensor(struct gspca_dev *gspca_dev) { struct sd *sd = (struct sd *) gspca_dev; - struct usb_device *dev = gspca_dev->dev; int i, n; u16 value; const struct sensor_info *ptsensor_info; /*fixme: should also check the other sensor (back mi1320_soc, front mc501cb)*/ if (sd->flags & FL_SAMSUNG) { - reg_w(dev, 0xa0, 0x01, 0xb301); - reg_w(dev, 0x89, 0xf0ff, 0xffff); /* select the back sensor */ + reg_w(gspca_dev, 0xa0, 0x01, 0xb301); + reg_w(gspca_dev, 0x89, 0xf0ff, 0xffff); + /* select the back sensor */ } reg_r(gspca_dev, 0xa1, 0xbfcf, 1); @@ -3158,13 +3205,13 @@ static int vc032x_probe_sensor(struct gspca_dev *gspca_dev) n = ARRAY_SIZE(vc0323_probe_data); } for (i = 0; i < n; i++) { - reg_w(dev, 0xa0, 0x02, 0xb334); - reg_w(dev, 0xa0, ptsensor_info->m1, 0xb300); - reg_w(dev, 0xa0, ptsensor_info->m2, 0xb300); - reg_w(dev, 0xa0, 0x01, 0xb308); - reg_w(dev, 0xa0, 0x0c, 0xb309); - reg_w(dev, 0xa0, ptsensor_info->I2cAdd, 0xb335); - reg_w(dev, 0xa0, ptsensor_info->op, 0xb301); + reg_w(gspca_dev, 0xa0, 0x02, 0xb334); + reg_w(gspca_dev, 0xa0, ptsensor_info->m1, 0xb300); + reg_w(gspca_dev, 0xa0, ptsensor_info->m2, 0xb300); + reg_w(gspca_dev, 0xa0, 0x01, 0xb308); + reg_w(gspca_dev, 0xa0, 0x0c, 0xb309); + reg_w(gspca_dev, 0xa0, ptsensor_info->I2cAdd, 0xb335); + reg_w(gspca_dev, 0xa0, ptsensor_info->op, 0xb301); value = read_sensor_register(gspca_dev, ptsensor_info->IdAdd); if (value == 0 && ptsensor_info->IdAdd == 0x82) value = read_sensor_register(gspca_dev, 0x83); @@ -3192,26 +3239,33 @@ static void i2c_write(struct gspca_dev *gspca_dev, u8 reg, const u8 *val, u8 size) /* 1 or 2 */ { - struct usb_device *dev = gspca_dev->dev; int retry; - reg_r(gspca_dev, 0xa1, 0xb33f, 1); +#ifdef GSPCA_DEBUG + if (gspca_dev->usb_err < 0) + return; + if (size == 1) + PDEBUG(D_USBO, "i2c_w %02x %02x", reg, *val); + else + PDEBUG(D_USBO, "i2c_w %02x %02x%02x", reg, *val, val[1]); +#endif + reg_r_i(gspca_dev, 0xa1, 0xb33f, 1); /*fixme:should check if (!(gspca_dev->usb_buf[0] & 0x02)) error*/ - reg_w(dev, 0xa0, size, 0xb334); - reg_w(dev, 0xa0, reg, 0xb33a); - reg_w(dev, 0xa0, val[0], 0xb336); + reg_w_i(gspca_dev, 0xa0, size, 0xb334); + reg_w_i(gspca_dev, 0xa0, reg, 0xb33a); + reg_w_i(gspca_dev, 0xa0, val[0], 0xb336); if (size > 1) - reg_w(dev, 0xa0, val[1], 0xb337); - reg_w(dev, 0xa0, 0x01, 0xb339); + reg_w_i(gspca_dev, 0xa0, val[1], 0xb337); + reg_w_i(gspca_dev, 0xa0, 0x01, 0xb339); retry = 4; do { - reg_r(gspca_dev, 0xa1, 0xb33b, 1); + reg_r_i(gspca_dev, 0xa1, 0xb33b, 1); if (gspca_dev->usb_buf[0] == 0) break; msleep(20); } while (--retry > 0); if (retry <= 0) - PDEBUG(D_ERR, "i2c_write failed"); + PDEBUG(D_ERR, "i2c_write timeout"); } static void put_tab_to_reg(struct gspca_dev *gspca_dev, @@ -3221,13 +3275,12 @@ static void put_tab_to_reg(struct gspca_dev *gspca_dev, u16 ad = addr; for (j = 0; j < tabsize; j++) - reg_w(gspca_dev->dev, 0xa0, tab[j], ad++); + reg_w(gspca_dev, 0xa0, tab[j], ad++); } static void usb_exchange(struct gspca_dev *gspca_dev, const u8 data[][4]) { - struct usb_device *dev = gspca_dev->dev; int i = 0; for (;;) { @@ -3235,7 +3288,7 @@ static void usb_exchange(struct gspca_dev *gspca_dev, default: return; case 0xcc: /* normal write */ - reg_w(dev, 0xa0, data[i][2], + reg_w(gspca_dev, 0xa0, data[i][2], (data[i][0]) << 8 | data[i][1]); break; case 0xaa: /* i2c op */ @@ -3259,7 +3312,6 @@ static int sd_config(struct gspca_dev *gspca_dev, const struct usb_device_id *id) { struct sd *sd = (struct sd *) gspca_dev; - struct usb_device *dev = gspca_dev->dev; struct cam *cam; int sensor; static u8 npkt[] = { /* number of packets per ISOC message */ @@ -3363,13 +3415,6 @@ static int sd_config(struct gspca_dev *gspca_dev, if (sd->sensor == SENSOR_OV7670) sd->flags |= FL_HFLIP | FL_VFLIP; - if (sd->bridge == BRIDGE_VC0321) { - reg_r(gspca_dev, 0x8a, 0, 3); - reg_w(dev, 0x87, 0x00, 0x0f0f); - - reg_r(gspca_dev, 0x8b, 0, 3); - reg_w(dev, 0x88, 0x00, 0x0202); - } return 0; } @@ -3378,15 +3423,21 @@ static int sd_init(struct gspca_dev *gspca_dev) { struct sd *sd = (struct sd *) gspca_dev; - if (sd->sensor == SENSOR_POxxxx) { - reg_r(gspca_dev, 0xa1, 0xb300, 1); - if (gspca_dev->usb_buf[0] != 0) { - reg_w(gspca_dev->dev, 0xa0, 0x26, 0xb300); - reg_w(gspca_dev->dev, 0xa0, 0x04, 0xb300); - reg_w(gspca_dev->dev, 0xa0, 0x00, 0xb300); + if (sd->bridge == BRIDGE_VC0321) { + reg_r(gspca_dev, 0x8a, 0, 3); + reg_w(gspca_dev, 0x87, 0x00, 0x0f0f); + reg_r(gspca_dev, 0x8b, 0, 3); + reg_w(gspca_dev, 0x88, 0x00, 0x0202); + if (sd->sensor == SENSOR_POxxxx) { + reg_r(gspca_dev, 0xa1, 0xb300, 1); + if (gspca_dev->usb_buf[0] != 0) { + reg_w(gspca_dev, 0xa0, 0x26, 0xb300); + reg_w(gspca_dev, 0xa0, 0x04, 0xb300); + reg_w(gspca_dev, 0xa0, 0x00, 0xb300); + } } } - return 0; + return gspca_dev->usb_err; } static void setbrightness(struct gspca_dev *gspca_dev) @@ -3516,17 +3567,17 @@ static int sd_start(struct gspca_dev *gspca_dev) /*fixme: back sensor only*/ if (sd->flags & FL_SAMSUNG) { - reg_w(gspca_dev->dev, 0x89, 0xf0ff, 0xffff); - reg_w(gspca_dev->dev, 0xa9, 0x8348, 0x000e); - reg_w(gspca_dev->dev, 0xa9, 0x0000, 0x001a); + reg_w(gspca_dev, 0x89, 0xf0ff, 0xffff); + reg_w(gspca_dev, 0xa9, 0x8348, 0x000e); + reg_w(gspca_dev, 0xa9, 0x0000, 0x001a); } /* Assume start use the good resolution from gspca_dev->mode */ if (sd->bridge == BRIDGE_VC0321) { - reg_w(gspca_dev->dev, 0xa0, 0xff, 0xbfec); - reg_w(gspca_dev->dev, 0xa0, 0xff, 0xbfed); - reg_w(gspca_dev->dev, 0xa0, 0xff, 0xbfee); - reg_w(gspca_dev->dev, 0xa0, 0xff, 0xbfef); + reg_w(gspca_dev, 0xa0, 0xff, 0xbfec); + reg_w(gspca_dev, 0xa0, 0xff, 0xbfed); + reg_w(gspca_dev, 0xa0, 0xff, 0xbfee); + reg_w(gspca_dev, 0xa0, 0xff, 0xbfef); sd->image_offset = 46; } else { if (gspca_dev->cam.cam_mode[gspca_dev->curr_mode].pixelformat @@ -3617,7 +3668,7 @@ static int sd_start(struct gspca_dev *gspca_dev) init = poxxxx_initVGA; usb_exchange(gspca_dev, init); reg_r(gspca_dev, 0x8c, 0x0000, 3); - reg_w(gspca_dev->dev, 0xa0, + reg_w(gspca_dev, 0xa0, gspca_dev->usb_buf[2] & 1 ? 0 : 1, 0xb35c); msleep(300); @@ -3635,10 +3686,10 @@ static int sd_start(struct gspca_dev *gspca_dev) switch (sd->sensor) { case SENSOR_PO1200: case SENSOR_HV7131R: - reg_w(gspca_dev->dev, 0x89, 0x0400, 0x1415); + reg_w(gspca_dev, 0x89, 0x0400, 0x1415); break; case SENSOR_MI1310_SOC: - reg_w(gspca_dev->dev, 0x89, 0x058c, 0x0000); + reg_w(gspca_dev, 0x89, 0x058c, 0x0000); break; } msleep(100); @@ -3648,9 +3699,9 @@ static int sd_start(struct gspca_dev *gspca_dev) } switch (sd->sensor) { case SENSOR_OV7670: - reg_w(gspca_dev->dev, 0x87, 0xffff, 0xffff); - reg_w(gspca_dev->dev, 0x88, 0xff00, 0xf0f1); - reg_w(gspca_dev->dev, 0xa0, 0x0000, 0xbfff); + reg_w(gspca_dev, 0x87, 0xffff, 0xffff); + reg_w(gspca_dev, 0x88, 0xff00, 0xf0f1); + reg_w(gspca_dev, 0xa0, 0x0000, 0xbfff); break; case SENSOR_POxxxx: setcolors(gspca_dev); @@ -3659,51 +3710,49 @@ static int sd_start(struct gspca_dev *gspca_dev) /* led on */ msleep(80); - reg_w(gspca_dev->dev, 0x89, 0xffff, 0xfdff); + reg_w(gspca_dev, 0x89, 0xffff, 0xfdff); usb_exchange(gspca_dev, poxxxx_init_end_2); break; } - return 0; + return gspca_dev->usb_err; } static void sd_stopN(struct gspca_dev *gspca_dev) { - struct usb_device *dev = gspca_dev->dev; struct sd *sd = (struct sd *) gspca_dev; switch (sd->sensor) { case SENSOR_MI1310_SOC: - reg_w(dev, 0x89, 0x058c, 0x00ff); + reg_w(gspca_dev, 0x89, 0x058c, 0x00ff); break; case SENSOR_POxxxx: return; default: if (!(sd->flags & FL_SAMSUNG)) - reg_w(dev, 0x89, 0xffff, 0xffff); + reg_w(gspca_dev, 0x89, 0xffff, 0xffff); break; } - reg_w(dev, 0xa0, 0x01, 0xb301); - reg_w(dev, 0xa0, 0x09, 0xb003); + reg_w(gspca_dev, 0xa0, 0x01, 0xb301); + reg_w(gspca_dev, 0xa0, 0x09, 0xb003); } /* called on streamoff with alt 0 and on disconnect */ static void sd_stop0(struct gspca_dev *gspca_dev) { - struct usb_device *dev = gspca_dev->dev; struct sd *sd = (struct sd *) gspca_dev; if (!gspca_dev->present) return; /*fixme: is this useful?*/ if (sd->sensor == SENSOR_MI1310_SOC) - reg_w(dev, 0x89, 0x058c, 0x00ff); + reg_w(gspca_dev, 0x89, 0x058c, 0x00ff); else if (!(sd->flags & FL_SAMSUNG)) - reg_w(dev, 0x89, 0xffff, 0xffff); + reg_w(gspca_dev, 0x89, 0xffff, 0xffff); if (sd->sensor == SENSOR_POxxxx) { - reg_w(dev, 0xa0, 0x26, 0xb300); - reg_w(dev, 0xa0, 0x04, 0xb300); - reg_w(dev, 0xa0, 0x00, 0xb300); + reg_w(gspca_dev, 0xa0, 0x26, 0xb300); + reg_w(gspca_dev, 0xa0, 0x04, 0xb300); + reg_w(gspca_dev, 0xa0, 0x00, 0xb300); } } @@ -3726,17 +3775,12 @@ static void sd_pkt_scan(struct gspca_dev *gspca_dev, /* The vc0321 sends some additional data after sending the complete * frame, we ignore this. */ if (sd->bridge == BRIDGE_VC0321) { - struct gspca_frame *frame; - int l; + int size, l; - frame = gspca_get_i_frame(gspca_dev); - if (frame == NULL) { - gspca_dev->last_packet_type = DISCARD_PACKET; - return; - } - l = frame->data_end - frame->data; - if (len > frame->v4l2_buf.length - l) - len = frame->v4l2_buf.length - l; + l = gspca_dev->image_len; + size = gspca_dev->frsz; + if (len > size - l) + len = size - l; } gspca_frame_add(gspca_dev, INTER_PACKET, data, len); } @@ -3748,7 +3792,7 @@ static int sd_setbrightness(struct gspca_dev *gspca_dev, __s32 val) sd->brightness = val; if (gspca_dev->streaming) setbrightness(gspca_dev); - return 0; + return gspca_dev->usb_err; } static int sd_getbrightness(struct gspca_dev *gspca_dev, __s32 *val) @@ -3766,7 +3810,7 @@ static int sd_setcontrast(struct gspca_dev *gspca_dev, __s32 val) sd->contrast = val; if (gspca_dev->streaming) setcontrast(gspca_dev); - return 0; + return gspca_dev->usb_err; } static int sd_getcontrast(struct gspca_dev *gspca_dev, __s32 *val) @@ -3784,7 +3828,7 @@ static int sd_setcolors(struct gspca_dev *gspca_dev, __s32 val) sd->colors = val; if (gspca_dev->streaming) setcolors(gspca_dev); - return 0; + return gspca_dev->usb_err; } static int sd_getcolors(struct gspca_dev *gspca_dev, __s32 *val) @@ -3802,7 +3846,7 @@ static int sd_sethflip(struct gspca_dev *gspca_dev, __s32 val) sd->hflip = val; if (gspca_dev->streaming) sethvflip(gspca_dev); - return 0; + return gspca_dev->usb_err; } static int sd_gethflip(struct gspca_dev *gspca_dev, __s32 *val) @@ -3820,7 +3864,7 @@ static int sd_setvflip(struct gspca_dev *gspca_dev, __s32 val) sd->vflip = val; if (gspca_dev->streaming) sethvflip(gspca_dev); - return 0; + return gspca_dev->usb_err; } static int sd_getvflip(struct gspca_dev *gspca_dev, __s32 *val) @@ -3838,7 +3882,7 @@ static int sd_setfreq(struct gspca_dev *gspca_dev, __s32 val) sd->lightfreq = val; if (gspca_dev->streaming) setlightfreq(gspca_dev); - return 0; + return gspca_dev->usb_err; } static int sd_getfreq(struct gspca_dev *gspca_dev, __s32 *val) @@ -3856,7 +3900,7 @@ static int sd_setsharpness(struct gspca_dev *gspca_dev, __s32 val) sd->sharpness = val; if (gspca_dev->streaming) setsharpness(gspca_dev); - return 0; + return gspca_dev->usb_err; } static int sd_getsharpness(struct gspca_dev *gspca_dev, __s32 *val) diff --git a/drivers/media/video/gspca/w996Xcf.c b/drivers/media/video/gspca/w996Xcf.c index 2fffe203bed..38a68591ce4 100644 --- a/drivers/media/video/gspca/w996Xcf.c +++ b/drivers/media/video/gspca/w996Xcf.c @@ -31,14 +31,10 @@ the sensor drivers to v4l2 sub drivers, and properly split of this driver from ov519.c */ -/* The CONEX_CAM define for jpeg.h needs renaming, now its used here too */ -#define CONEX_CAM -#include "jpeg.h" - #define W9968CF_I2C_BUS_DELAY 4 /* delay in us for I2C bit r/w operations */ -#define Y_QUANTABLE (sd->jpeg_hdr + JPEG_QT0_OFFSET) -#define UV_QUANTABLE (sd->jpeg_hdr + JPEG_QT1_OFFSET) +#define Y_QUANTABLE (&sd->jpeg_hdr[JPEG_QT0_OFFSET]) +#define UV_QUANTABLE (&sd->jpeg_hdr[JPEG_QT1_OFFSET]) static const struct v4l2_pix_format w9968cf_vga_mode[] = { {160, 120, V4L2_PIX_FMT_UYVY, V4L2_FIELD_NONE, @@ -509,11 +505,6 @@ static int w9968cf_mode_init_regs(struct sd *sd) if (w9968cf_vga_mode[sd->gspca_dev.curr_mode].pixelformat == V4L2_PIX_FMT_JPEG) { /* We may get called multiple times (usb isoc bw negotiat.) */ - if (!sd->jpeg_hdr) - sd->jpeg_hdr = kmalloc(JPEG_HDR_SZ, GFP_KERNEL); - if (!sd->jpeg_hdr) - return -ENOMEM; - jpeg_define(sd->jpeg_hdr, sd->gspca_dev.height, sd->gspca_dev.width, 0x22); /* JPEG 420 */ jpeg_set_qual(sd->jpeg_hdr, sd->quality); @@ -562,9 +553,6 @@ static void w9968cf_stop0(struct sd *sd) reg_w(sd, 0x39, 0x0000); /* disable JPEG encoder */ reg_w(sd, 0x16, 0x0000); /* stop video capture */ } - - kfree(sd->jpeg_hdr); - sd->jpeg_hdr = NULL; } /* The w9968cf docs say that a 0 sized packet means EOF (and also SOF diff --git a/drivers/media/video/gspca/zc3xx.c b/drivers/media/video/gspca/zc3xx.c index d02aa5c8472..4473f0fb8b7 100644 --- a/drivers/media/video/gspca/zc3xx.c +++ b/drivers/media/video/gspca/zc3xx.c @@ -22,7 +22,6 @@ #define MODULE_NAME "zc3xx" #include <linux/input.h> -#include <linux/slab.h> #include "gspca.h" #include "jpeg.h" @@ -40,15 +39,16 @@ static int force_sensor = -1; struct sd { struct gspca_dev gspca_dev; /* !! must be the first item */ + u8 brightness; u8 contrast; u8 gamma; u8 autogain; u8 lightfreq; u8 sharpness; u8 quality; /* image quality */ -#define QUALITY_MIN 40 -#define QUALITY_MAX 60 -#define QUALITY_DEF 50 +#define QUALITY_MIN 50 +#define QUALITY_MAX 80 +#define QUALITY_DEF 70 u8 sensor; /* Type of image sensor chip */ /* !! values used in different tables */ @@ -75,10 +75,12 @@ struct sd { #define SENSOR_MAX 19 unsigned short chip_revision; - u8 *jpeg_hdr; + u8 jpeg_hdr[JPEG_HDR_SZ]; }; /* V4L2 controls supported by the driver */ +static int sd_setbrightness(struct gspca_dev *gspca_dev, __s32 val); +static int sd_getbrightness(struct gspca_dev *gspca_dev, __s32 *val); static int sd_setcontrast(struct gspca_dev *gspca_dev, __s32 val); static int sd_getcontrast(struct gspca_dev *gspca_dev, __s32 *val); static int sd_setautogain(struct gspca_dev *gspca_dev, __s32 val); @@ -93,6 +95,20 @@ static int sd_getsharpness(struct gspca_dev *gspca_dev, __s32 *val); static const struct ctrl sd_ctrls[] = { { { + .id = V4L2_CID_BRIGHTNESS, + .type = V4L2_CTRL_TYPE_INTEGER, + .name = "Brightness", + .minimum = 0, + .maximum = 255, + .step = 1, +#define BRIGHTNESS_DEF 128 + .default_value = BRIGHTNESS_DEF, + }, + .set = sd_setbrightness, + .get = sd_getbrightness, + }, + { + { .id = V4L2_CID_CONTRAST, .type = V4L2_CTRL_TYPE_INTEGER, .name = "Contrast", @@ -132,7 +148,7 @@ static const struct ctrl sd_ctrls[] = { .set = sd_setautogain, .get = sd_getautogain, }, -#define LIGHTFREQ_IDX 3 +#define LIGHTFREQ_IDX 4 { { .id = V4L2_CID_POWER_LINE_FREQUENCY, @@ -6011,9 +6027,12 @@ static void setcontrast(struct gspca_dev *gspca_dev) struct sd *sd = (struct sd *) gspca_dev; struct usb_device *dev = gspca_dev->dev; const u8 *Tgamma; - int g, i, k, adj, gp; + int g, i, brightness, contrast, adj, gp1, gp2; u8 gr[16]; - static const u8 delta_tb[16] = /* delta for contrast */ + static const u8 delta_b[16] = /* delta for brightness */ + {0x50, 0x38, 0x2d, 0x28, 0x24, 0x21, 0x1e, 0x1d, + 0x1d, 0x1b, 0x1b, 0x1b, 0x19, 0x18, 0x18, 0x18}; + static const u8 delta_c[16] = /* delta for contrast */ {0x2c, 0x1a, 0x12, 0x0c, 0x0a, 0x06, 0x06, 0x06, 0x04, 0x06, 0x04, 0x04, 0x03, 0x03, 0x02, 0x02}; static const u8 gamma_tb[6][16] = { @@ -6033,30 +6052,30 @@ static void setcontrast(struct gspca_dev *gspca_dev) Tgamma = gamma_tb[sd->gamma - 1]; - k = ((int) sd->contrast - 128); /* -128 / 128 */ + contrast = ((int) sd->contrast - 128); /* -128 / 127 */ + brightness = ((int) sd->brightness - 128); /* -128 / 92 */ adj = 0; - gp = 0; + gp1 = gp2 = 0; for (i = 0; i < 16; i++) { - g = Tgamma[i] - delta_tb[i] * k / 256 - adj / 2; + g = Tgamma[i] + delta_b[i] * brightness / 256 + - delta_c[i] * contrast / 256 - adj / 2; if (g > 0xff) g = 0xff; else if (g < 0) g = 0; reg_w(dev, g, 0x0120 + i); /* gamma */ - if (k > 0) + if (contrast > 0) adj--; - else + else if (contrast < 0) adj++; - - if (i != 0) { - if (gp == 0) - gr[i - 1] = 0; - else - gr[i - 1] = g - gp; - } - gp = g; + if (i > 1) + gr[i - 1] = (g - gp2) / 2; + else if (i != 0) + gr[0] = gp1 == 0 ? 0 : (g - gp1); + gp2 = gp1; + gp1 = g; } - gr[15] = gr[14] / 2; + gr[15] = (0xff - gp2) / 2; for (i = 0; i < 16; i++) reg_w(dev, gr[i], 0x0130 + i); /* gradient */ } @@ -6744,6 +6763,7 @@ static int sd_config(struct gspca_dev *gspca_dev, cam->nmodes = ARRAY_SIZE(broken_vga_mode); break; } + sd->brightness = BRIGHTNESS_DEF; sd->contrast = CONTRAST_DEF; sd->gamma = gamma[sd->sensor]; sd->autogain = AUTOGAIN_DEF; @@ -6798,9 +6818,6 @@ static int sd_start(struct gspca_dev *gspca_dev) }; /* create the JPEG header */ - sd->jpeg_hdr = kmalloc(JPEG_HDR_SZ, GFP_KERNEL); - if (!sd->jpeg_hdr) - return -ENOMEM; jpeg_define(sd->jpeg_hdr, gspca_dev->height, gspca_dev->width, 0x21); /* JPEG 422 */ jpeg_set_qual(sd->jpeg_hdr, sd->quality); @@ -6918,10 +6935,6 @@ static int sd_start(struct gspca_dev *gspca_dev) reg_w(dev, 0x00, 0x0007); /* (from win traces) */ reg_w(dev, 0x02, ZC3XX_R008_CLOCKSETTING); break; - case SENSOR_PAS202B: - reg_w(dev, 0x32, 0x0007); /* (from win traces) */ - reg_w(dev, 0x02, ZC3XX_R008_CLOCKSETTING); - break; } return 0; } @@ -6931,7 +6944,6 @@ static void sd_stop0(struct gspca_dev *gspca_dev) { struct sd *sd = (struct sd *) gspca_dev; - kfree(sd->jpeg_hdr); if (!gspca_dev->present) return; send_unknown(gspca_dev->dev, sd->sensor); @@ -6962,6 +6974,24 @@ static void sd_pkt_scan(struct gspca_dev *gspca_dev, gspca_frame_add(gspca_dev, INTER_PACKET, data, len); } +static int sd_setbrightness(struct gspca_dev *gspca_dev, __s32 val) +{ + struct sd *sd = (struct sd *) gspca_dev; + + sd->brightness = val; + if (gspca_dev->streaming) + setcontrast(gspca_dev); + return 0; +} + +static int sd_getbrightness(struct gspca_dev *gspca_dev, __s32 *val) +{ + struct sd *sd = (struct sd *) gspca_dev; + + *val = sd->brightness; + return 0; +} + static int sd_setcontrast(struct gspca_dev *gspca_dev, __s32 val) { struct sd *sd = (struct sd *) gspca_dev; @@ -7163,9 +7193,7 @@ static const __devinitdata struct usb_device_id device_table[] = { {USB_DEVICE(0x046d, 0x08aa)}, {USB_DEVICE(0x046d, 0x08ac)}, {USB_DEVICE(0x046d, 0x08ad)}, -#if !defined CONFIG_USB_ZC0301 && !defined CONFIG_USB_ZC0301_MODULE {USB_DEVICE(0x046d, 0x08ae)}, -#endif {USB_DEVICE(0x046d, 0x08af)}, {USB_DEVICE(0x046d, 0x08b9)}, {USB_DEVICE(0x046d, 0x08d7)}, diff --git a/drivers/media/video/hdpvr/hdpvr-core.c b/drivers/media/video/hdpvr/hdpvr-core.c index 830d47b05e1..0cae5b82e1a 100644 --- a/drivers/media/video/hdpvr/hdpvr-core.c +++ b/drivers/media/video/hdpvr/hdpvr-core.c @@ -286,6 +286,8 @@ static int hdpvr_probe(struct usb_interface *interface, goto error; } + dev->workqueue = 0; + /* register v4l2_device early so it can be used for printks */ if (v4l2_device_register(&interface->dev, &dev->v4l2_dev)) { err("v4l2_device_register failed"); @@ -380,6 +382,9 @@ static int hdpvr_probe(struct usb_interface *interface, error: if (dev) { + /* Destroy single thread */ + if (dev->workqueue) + destroy_workqueue(dev->workqueue); /* this frees allocated memory */ hdpvr_delete(dev); } diff --git a/drivers/media/video/hdpvr/hdpvr-video.c b/drivers/media/video/hdpvr/hdpvr-video.c index c338f3f62e7..4863a21b1f2 100644 --- a/drivers/media/video/hdpvr/hdpvr-video.c +++ b/drivers/media/video/hdpvr/hdpvr-video.c @@ -394,7 +394,7 @@ err: static int hdpvr_release(struct file *file) { - struct hdpvr_fh *fh = (struct hdpvr_fh *)file->private_data; + struct hdpvr_fh *fh = file->private_data; struct hdpvr_device *dev = fh->dev; if (!dev) @@ -518,7 +518,7 @@ err: static unsigned int hdpvr_poll(struct file *filp, poll_table *wait) { struct hdpvr_buffer *buf = NULL; - struct hdpvr_fh *fh = (struct hdpvr_fh *)filp->private_data; + struct hdpvr_fh *fh = filp->private_data; struct hdpvr_device *dev = fh->dev; unsigned int mask = 0; diff --git a/drivers/media/video/ir-kbd-i2c.c b/drivers/media/video/ir-kbd-i2c.c index 29d43974265..27ae8bbfb47 100644 --- a/drivers/media/video/ir-kbd-i2c.c +++ b/drivers/media/video/ir-kbd-i2c.c @@ -47,7 +47,7 @@ #include <linux/i2c-id.h> #include <linux/workqueue.h> -#include <media/ir-common.h> +#include <media/ir-core.h> #include <media/ir-kbd-i2c.h> /* ----------------------------------------------------------------------- */ @@ -272,11 +272,8 @@ static void ir_key_poll(struct IR_i2c *ir) return; } - if (0 == rc) { - ir_input_nokey(ir->input, &ir->ir); - } else { - ir_input_keydown(ir->input, &ir->ir, ir_key); - } + if (rc) + ir_keydown(ir->input, ir_key, 0); } static void ir_work(struct work_struct *work) @@ -439,10 +436,7 @@ static int ir_probe(struct i2c_client *client, const struct i2c_device_id *id) dev_name(&client->dev)); /* init + register input device */ - err = ir_input_init(input_dev, &ir->ir, ir_type); - if (err < 0) - goto err_out_free; - + ir->ir_type = ir_type; input_dev->id.bustype = BUS_I2C; input_dev->name = ir->name; input_dev->phys = ir->phys; diff --git a/drivers/media/video/ivtv/ivtv-driver.c b/drivers/media/video/ivtv/ivtv-driver.c index 1b79475ca13..07c5c18a25c 100644 --- a/drivers/media/video/ivtv/ivtv-driver.c +++ b/drivers/media/video/ivtv/ivtv-driver.c @@ -130,6 +130,9 @@ static int ivtv_yuv_threshold = -1; static int ivtv_pci_latency = 1; int ivtv_debug; +#ifdef CONFIG_VIDEO_ADV_DEBUG +int ivtv_fw_debug; +#endif static int tunertype = -1; static int newi2c = -1; @@ -141,6 +144,9 @@ module_param_string(pal, pal, sizeof(pal), 0644); module_param_string(secam, secam, sizeof(secam), 0644); module_param_string(ntsc, ntsc, sizeof(ntsc), 0644); module_param_named(debug,ivtv_debug, int, 0644); +#ifdef CONFIG_VIDEO_ADV_DEBUG +module_param_named(fw_debug, ivtv_fw_debug, int, 0644); +#endif module_param(ivtv_pci_latency, int, 0644); module_param(ivtv_yuv_mode, int, 0644); module_param(ivtv_yuv_threshold, int, 0644); @@ -217,6 +223,10 @@ MODULE_PARM_DESC(debug, "\t\t\t 256/0x0100: yuv\n" "\t\t\t 512/0x0200: i2c\n" "\t\t\t1024/0x0400: high volume\n"); +#ifdef CONFIG_VIDEO_ADV_DEBUG +MODULE_PARM_DESC(fw_debug, + "Enable code for debugging firmware problems. Default: 0\n"); +#endif MODULE_PARM_DESC(ivtv_pci_latency, "Change the PCI latency to 64 if lower: 0 = No, 1 = Yes,\n" "\t\t\tDefault: Yes"); @@ -695,6 +705,8 @@ done: */ static int __devinit ivtv_init_struct1(struct ivtv *itv) { + struct sched_param param = { .sched_priority = 99 }; + itv->base_addr = pci_resource_start(itv->pdev, 0); itv->enc_mbox.max_mbox = 2; /* the encoder has 3 mailboxes (0-2) */ itv->dec_mbox.max_mbox = 1; /* the decoder has 2 mailboxes (0-1) */ @@ -706,13 +718,17 @@ static int __devinit ivtv_init_struct1(struct ivtv *itv) spin_lock_init(&itv->lock); spin_lock_init(&itv->dma_reg_lock); - itv->irq_work_queues = create_singlethread_workqueue(itv->v4l2_dev.name); - if (itv->irq_work_queues == NULL) { - IVTV_ERR("Could not create ivtv workqueue\n"); + init_kthread_worker(&itv->irq_worker); + itv->irq_worker_task = kthread_run(kthread_worker_fn, &itv->irq_worker, + itv->v4l2_dev.name); + if (IS_ERR(itv->irq_worker_task)) { + IVTV_ERR("Could not create ivtv task\n"); return -1; } + /* must use the FIFO scheduler as it is realtime sensitive */ + sched_setscheduler(itv->irq_worker_task, SCHED_FIFO, ¶m); - INIT_WORK(&itv->irq_work_queue, ivtv_irq_work_handler); + init_kthread_work(&itv->irq_work, ivtv_irq_work_handler); /* start counting open_id at 1 */ itv->open_id = 1; @@ -996,7 +1012,7 @@ static int __devinit ivtv_probe(struct pci_dev *pdev, /* PCI Device Setup */ retval = ivtv_setup_pci(itv, pdev, pci_id); if (retval == -EIO) - goto free_workqueue; + goto free_worker; if (retval == -ENXIO) goto free_mem; @@ -1208,8 +1224,8 @@ free_mem: release_mem_region(itv->base_addr + IVTV_REG_OFFSET, IVTV_REG_SIZE); if (itv->has_cx23415) release_mem_region(itv->base_addr + IVTV_DECODER_OFFSET, IVTV_DECODER_SIZE); -free_workqueue: - destroy_workqueue(itv->irq_work_queues); +free_worker: + kthread_stop(itv->irq_worker_task); err: if (retval == 0) retval = -ENODEV; @@ -1353,9 +1369,9 @@ static void ivtv_remove(struct pci_dev *pdev) ivtv_set_irq_mask(itv, 0xffffffff); del_timer_sync(&itv->dma_timer); - /* Stop all Work Queues */ - flush_workqueue(itv->irq_work_queues); - destroy_workqueue(itv->irq_work_queues); + /* Kill irq worker */ + flush_kthread_worker(&itv->irq_worker); + kthread_stop(itv->irq_worker_task); ivtv_streams_cleanup(itv, 1); ivtv_udma_free(itv); @@ -1425,12 +1441,16 @@ EXPORT_SYMBOL(ivtv_vapi); EXPORT_SYMBOL(ivtv_vapi_result); EXPORT_SYMBOL(ivtv_clear_irq_mask); EXPORT_SYMBOL(ivtv_debug); +#ifdef CONFIG_VIDEO_ADV_DEBUG +EXPORT_SYMBOL(ivtv_fw_debug); +#endif EXPORT_SYMBOL(ivtv_reset_ir_gpio); EXPORT_SYMBOL(ivtv_udma_setup); EXPORT_SYMBOL(ivtv_udma_unmap); EXPORT_SYMBOL(ivtv_udma_alloc); EXPORT_SYMBOL(ivtv_udma_prepare); EXPORT_SYMBOL(ivtv_init_on_first_open); +EXPORT_SYMBOL(ivtv_firmware_check); module_init(module_start); module_exit(module_cleanup); diff --git a/drivers/media/video/ivtv/ivtv-driver.h b/drivers/media/video/ivtv/ivtv-driver.h index 5b45fd2b264..10207124621 100644 --- a/drivers/media/video/ivtv/ivtv-driver.h +++ b/drivers/media/video/ivtv/ivtv-driver.h @@ -51,7 +51,7 @@ #include <linux/unistd.h> #include <linux/pagemap.h> #include <linux/scatterlist.h> -#include <linux/workqueue.h> +#include <linux/kthread.h> #include <linux/mutex.h> #include <linux/slab.h> #include <asm/uaccess.h> @@ -122,6 +122,9 @@ /* debugging */ extern int ivtv_debug; +#ifdef CONFIG_VIDEO_ADV_DEBUG +extern int ivtv_fw_debug; +#endif #define IVTV_DBGFLG_WARN (1 << 0) #define IVTV_DBGFLG_INFO (1 << 1) @@ -257,7 +260,6 @@ struct ivtv_mailbox_data { #define IVTV_F_I_DEC_PAUSED 20 /* the decoder is paused */ #define IVTV_F_I_INITED 21 /* set after first open */ #define IVTV_F_I_FAILED 22 /* set if first open failed */ -#define IVTV_F_I_WORK_INITED 23 /* worker thread was initialized */ /* Event notifications */ #define IVTV_F_I_EV_DEC_STOPPED 28 /* decoder stopped event */ @@ -663,8 +665,9 @@ struct ivtv { /* Interrupts & DMA */ u32 irqmask; /* active interrupts */ u32 irq_rr_idx; /* round-robin stream index */ - struct workqueue_struct *irq_work_queues; /* workqueue for PIO/YUV/VBI actions */ - struct work_struct irq_work_queue; /* work entry */ + struct kthread_worker irq_worker; /* kthread worker for PIO/YUV/VBI actions */ + struct task_struct *irq_worker_task; /* task for irq_worker */ + struct kthread_work irq_work; /* kthread work entry */ spinlock_t dma_reg_lock; /* lock access to DMA engine registers */ int cur_dma_stream; /* index of current stream doing DMA (-1 if none) */ int cur_pio_stream; /* index of current stream doing PIO (-1 if none) */ @@ -734,6 +737,7 @@ struct ivtv { struct v4l2_rect osd_rect; /* current OSD position and size */ struct v4l2_rect main_rect; /* current Main window position and size */ struct osd_info *osd_info; /* ivtvfb private OSD info */ + void (*ivtvfb_restore)(struct ivtv *itv); /* Used for a warm start */ }; static inline struct ivtv *to_ivtv(struct v4l2_device *v4l2_dev) diff --git a/drivers/media/video/ivtv/ivtv-fileops.c b/drivers/media/video/ivtv/ivtv-fileops.c index 3c2cc270ccd..a6a2cdb8156 100644 --- a/drivers/media/video/ivtv/ivtv-fileops.c +++ b/drivers/media/video/ivtv/ivtv-fileops.c @@ -32,6 +32,7 @@ #include "ivtv-yuv.h" #include "ivtv-ioctl.h" #include "ivtv-cards.h" +#include "ivtv-firmware.h" #include <media/v4l2-event.h> #include <media/saa7115.h> @@ -526,6 +527,7 @@ int ivtv_start_decoding(struct ivtv_open_id *id, int speed) { struct ivtv *itv = id->itv; struct ivtv_stream *s = &itv->streams[id->type]; + int rc; if (atomic_read(&itv->decoding) == 0) { if (ivtv_claim_stream(id, s->type)) { @@ -533,7 +535,13 @@ int ivtv_start_decoding(struct ivtv_open_id *id, int speed) IVTV_DEBUG_WARN("start decode, stream already claimed\n"); return -EBUSY; } - ivtv_start_v4l2_decode_stream(s, 0); + rc = ivtv_start_v4l2_decode_stream(s, 0); + if (rc < 0) { + if (rc == -EAGAIN) + rc = ivtv_start_v4l2_decode_stream(s, 0); + if (rc < 0) + return rc; + } } if (s->type == IVTV_DEC_STREAM_TYPE_MPG) return ivtv_set_speed(itv, speed); @@ -912,12 +920,32 @@ int ivtv_v4l2_close(struct file *filp) static int ivtv_serialized_open(struct ivtv_stream *s, struct file *filp) { +#ifdef CONFIG_VIDEO_ADV_DEBUG + struct video_device *vdev = video_devdata(filp); +#endif struct ivtv *itv = s->itv; struct ivtv_open_id *item; int res = 0; IVTV_DEBUG_FILE("open %s\n", s->name); +#ifdef CONFIG_VIDEO_ADV_DEBUG + /* Unless ivtv_fw_debug is set, error out if firmware dead. */ + if (ivtv_fw_debug) { + IVTV_WARN("Opening %s with dead firmware lockout disabled\n", + video_device_node_name(vdev)); + IVTV_WARN("Selected firmware errors will be ignored\n"); + } else { +#else + if (1) { +#endif + res = ivtv_firmware_check(itv, "ivtv_serialized_open"); + if (res == -EAGAIN) + res = ivtv_firmware_check(itv, "ivtv_serialized_open"); + if (res < 0) + return -EIO; + } + if (s->type == IVTV_DEC_STREAM_TYPE_MPG && test_bit(IVTV_F_S_CLAIMED, &itv->streams[IVTV_DEC_STREAM_TYPE_YUV].s_flags)) return -EBUSY; diff --git a/drivers/media/video/ivtv/ivtv-firmware.c b/drivers/media/video/ivtv/ivtv-firmware.c index a71e8ba306b..d8bf2b01729 100644 --- a/drivers/media/video/ivtv/ivtv-firmware.c +++ b/drivers/media/video/ivtv/ivtv-firmware.c @@ -23,7 +23,10 @@ #include "ivtv-mailbox.h" #include "ivtv-firmware.h" #include "ivtv-yuv.h" +#include "ivtv-ioctl.h" +#include "ivtv-cards.h" #include <linux/firmware.h> +#include <media/saa7127.h> #define IVTV_MASK_SPU_ENABLE 0xFFFFFFFE #define IVTV_MASK_VPU_ENABLE15 0xFFFFFFF6 @@ -271,3 +274,122 @@ void ivtv_init_mpeg_decoder(struct ivtv *itv) } ivtv_vapi(itv, CX2341X_DEC_STOP_PLAYBACK, 4, 0, 0, 0, 1); } + +/* Try to restart the card & restore previous settings */ +int ivtv_firmware_restart(struct ivtv *itv) +{ + int rc = 0; + v4l2_std_id std; + struct ivtv_open_id fh; + fh.itv = itv; + + if (itv->v4l2_cap & V4L2_CAP_VIDEO_OUTPUT) + /* Display test image during restart */ + ivtv_call_hw(itv, IVTV_HW_SAA7127, video, s_routing, + SAA7127_INPUT_TYPE_TEST_IMAGE, + itv->card->video_outputs[itv->active_output].video_output, + 0); + + mutex_lock(&itv->udma.lock); + + rc = ivtv_firmware_init(itv); + if (rc) { + mutex_unlock(&itv->udma.lock); + return rc; + } + + /* Allow settings to reload */ + ivtv_mailbox_cache_invalidate(itv); + + /* Restore video standard */ + std = itv->std; + itv->std = 0; + ivtv_s_std(NULL, &fh, &std); + + if (itv->v4l2_cap & V4L2_CAP_VIDEO_OUTPUT) { + ivtv_init_mpeg_decoder(itv); + + /* Restore framebuffer if active */ + if (itv->ivtvfb_restore) + itv->ivtvfb_restore(itv); + + /* Restore alpha settings */ + ivtv_set_osd_alpha(itv); + + /* Restore normal output */ + ivtv_call_hw(itv, IVTV_HW_SAA7127, video, s_routing, + SAA7127_INPUT_TYPE_NORMAL, + itv->card->video_outputs[itv->active_output].video_output, + 0); + } + + mutex_unlock(&itv->udma.lock); + return rc; +} + +/* Check firmware running state. The checks fall through + allowing multiple failures to be logged. */ +int ivtv_firmware_check(struct ivtv *itv, char *where) +{ + int res = 0; + + /* Check encoder is still running */ + if (ivtv_vapi(itv, CX2341X_ENC_PING_FW, 0) < 0) { + IVTV_WARN("Encoder has died : %s\n", where); + res = -1; + } + + /* Also check audio. Only check if not in use & encoder is okay */ + if (!res && !atomic_read(&itv->capturing) && + (!atomic_read(&itv->decoding) || + (atomic_read(&itv->decoding) < 2 && test_bit(IVTV_F_I_DEC_YUV, + &itv->i_flags)))) { + + if (ivtv_vapi(itv, CX2341X_ENC_MISC, 1, 12) < 0) { + IVTV_WARN("Audio has died (Encoder OK) : %s\n", where); + res = -2; + } + } + + if (itv->v4l2_cap & V4L2_CAP_VIDEO_OUTPUT) { + /* Second audio check. Skip if audio already failed */ + if (res != -2 && read_dec(0x100) != read_dec(0x104)) { + /* Wait & try again to be certain. */ + ivtv_msleep_timeout(14, 0); + if (read_dec(0x100) != read_dec(0x104)) { + IVTV_WARN("Audio has died (Decoder) : %s\n", + where); + res = -1; + } + } + + /* Check decoder is still running */ + if (ivtv_vapi(itv, CX2341X_DEC_PING_FW, 0) < 0) { + IVTV_WARN("Decoder has died : %s\n", where); + res = -1; + } + } + + /* If something failed & currently idle, try to reload */ + if (res && !atomic_read(&itv->capturing) && + !atomic_read(&itv->decoding)) { + IVTV_INFO("Detected in %s that firmware had failed - " + "Reloading\n", where); + res = ivtv_firmware_restart(itv); + /* + * Even if restarted ok, still signal a problem had occured. + * The caller can come through this function again to check + * if things are really ok after the restart. + */ + if (!res) { + IVTV_INFO("Firmware restart okay\n"); + res = -EAGAIN; + } else { + IVTV_INFO("Firmware restart failed\n"); + } + } else if (res) { + res = -EIO; + } + + return res; +} diff --git a/drivers/media/video/ivtv/ivtv-firmware.h b/drivers/media/video/ivtv/ivtv-firmware.h index 041ba94e65b..52bb4e5598f 100644 --- a/drivers/media/video/ivtv/ivtv-firmware.h +++ b/drivers/media/video/ivtv/ivtv-firmware.h @@ -26,5 +26,6 @@ int ivtv_firmware_init(struct ivtv *itv); void ivtv_firmware_versions(struct ivtv *itv); void ivtv_halt_firmware(struct ivtv *itv); void ivtv_init_mpeg_decoder(struct ivtv *itv); +int ivtv_firmware_check(struct ivtv *itv, char *where); #endif diff --git a/drivers/media/video/ivtv/ivtv-irq.c b/drivers/media/video/ivtv/ivtv-irq.c index fea1ec33b0d..9b4faf00919 100644 --- a/drivers/media/video/ivtv/ivtv-irq.c +++ b/drivers/media/video/ivtv/ivtv-irq.c @@ -71,19 +71,10 @@ static void ivtv_pio_work_handler(struct ivtv *itv) write_reg(IVTV_IRQ_ENC_PIO_COMPLETE, 0x44); } -void ivtv_irq_work_handler(struct work_struct *work) +void ivtv_irq_work_handler(struct kthread_work *work) { - struct ivtv *itv = container_of(work, struct ivtv, irq_work_queue); + struct ivtv *itv = container_of(work, struct ivtv, irq_work); - DEFINE_WAIT(wait); - - if (test_and_clear_bit(IVTV_F_I_WORK_INITED, &itv->i_flags)) { - struct sched_param param = { .sched_priority = 99 }; - - /* This thread must use the FIFO scheduler as it - is realtime sensitive. */ - sched_setscheduler(current, SCHED_FIFO, ¶m); - } if (test_and_clear_bit(IVTV_F_I_WORK_HANDLER_PIO, &itv->i_flags)) ivtv_pio_work_handler(itv); @@ -975,7 +966,7 @@ irqreturn_t ivtv_irq_handler(int irq, void *dev_id) } if (test_and_clear_bit(IVTV_F_I_HAVE_WORK, &itv->i_flags)) { - queue_work(itv->irq_work_queues, &itv->irq_work_queue); + queue_kthread_work(&itv->irq_worker, &itv->irq_work); } spin_unlock(&itv->dma_reg_lock); diff --git a/drivers/media/video/ivtv/ivtv-irq.h b/drivers/media/video/ivtv/ivtv-irq.h index f879a5822e7..1e84433737c 100644 --- a/drivers/media/video/ivtv/ivtv-irq.h +++ b/drivers/media/video/ivtv/ivtv-irq.h @@ -46,7 +46,7 @@ irqreturn_t ivtv_irq_handler(int irq, void *dev_id); -void ivtv_irq_work_handler(struct work_struct *work); +void ivtv_irq_work_handler(struct kthread_work *work); void ivtv_dma_stream_dec_prepare(struct ivtv_stream *s, u32 offset, int lock); void ivtv_unfinished_dma(unsigned long arg); diff --git a/drivers/media/video/ivtv/ivtv-mailbox.c b/drivers/media/video/ivtv/ivtv-mailbox.c index 84577f6f41a..e3ce9676378 100644 --- a/drivers/media/video/ivtv/ivtv-mailbox.c +++ b/drivers/media/video/ivtv/ivtv-mailbox.c @@ -377,3 +377,11 @@ void ivtv_api_get_data(struct ivtv_mailbox_data *mbdata, int mb, for (i = 0; i < argc; i++, p++) data[i] = readl(p); } + +/* Wipe api cache */ +void ivtv_mailbox_cache_invalidate(struct ivtv *itv) +{ + int i; + for (i = 0; i < 256; i++) + itv->api_cache[i].last_jiffies = 0; +} diff --git a/drivers/media/video/ivtv/ivtv-mailbox.h b/drivers/media/video/ivtv/ivtv-mailbox.h index 8247662c928..2c834d2cb56 100644 --- a/drivers/media/video/ivtv/ivtv-mailbox.h +++ b/drivers/media/video/ivtv/ivtv-mailbox.h @@ -30,5 +30,6 @@ int ivtv_api(struct ivtv *itv, int cmd, int args, u32 data[]); int ivtv_vapi_result(struct ivtv *itv, u32 data[CX2341X_MBOX_MAX_DATA], int cmd, int args, ...); int ivtv_vapi(struct ivtv *itv, int cmd, int args, ...); int ivtv_api_func(void *priv, u32 cmd, int in, int out, u32 data[CX2341X_MBOX_MAX_DATA]); +void ivtv_mailbox_cache_invalidate(struct ivtv *itv); #endif diff --git a/drivers/media/video/ivtv/ivtv-streams.c b/drivers/media/video/ivtv/ivtv-streams.c index a937e2ff9b6..55df4190c28 100644 --- a/drivers/media/video/ivtv/ivtv-streams.c +++ b/drivers/media/video/ivtv/ivtv-streams.c @@ -42,6 +42,7 @@ #include "ivtv-yuv.h" #include "ivtv-cards.h" #include "ivtv-streams.h" +#include "ivtv-firmware.h" #include <media/v4l2-event.h> static const struct v4l2_file_operations ivtv_v4l2_enc_fops = { @@ -674,12 +675,14 @@ static int ivtv_setup_v4l2_decode_stream(struct ivtv_stream *s) /* Decoder sometimes dies here, so wait a moment */ ivtv_msleep_timeout(10, 0); - return 0; + /* Known failure point for firmware, so check */ + return ivtv_firmware_check(itv, "ivtv_setup_v4l2_decode_stream"); } int ivtv_start_v4l2_decode_stream(struct ivtv_stream *s, int gop_offset) { struct ivtv *itv = s->itv; + int rc; if (s->vdev == NULL) return -EINVAL; @@ -689,7 +692,11 @@ int ivtv_start_v4l2_decode_stream(struct ivtv_stream *s, int gop_offset) IVTV_DEBUG_INFO("Starting decode stream %s (gop_offset %d)\n", s->name, gop_offset); - ivtv_setup_v4l2_decode_stream(s); + rc = ivtv_setup_v4l2_decode_stream(s); + if (rc < 0) { + clear_bit(IVTV_F_S_STREAMING, &s->s_flags); + return rc; + } /* set dma size to 65536 bytes */ ivtv_vapi(itv, CX2341X_DEC_SET_DMA_BLOCK_SIZE, 1, 65536); diff --git a/drivers/media/video/ivtv/ivtv-version.h b/drivers/media/video/ivtv/ivtv-version.h index b530dec399d..b67a4048f5a 100644 --- a/drivers/media/video/ivtv/ivtv-version.h +++ b/drivers/media/video/ivtv/ivtv-version.h @@ -23,7 +23,7 @@ #define IVTV_DRIVER_NAME "ivtv" #define IVTV_DRIVER_VERSION_MAJOR 1 #define IVTV_DRIVER_VERSION_MINOR 4 -#define IVTV_DRIVER_VERSION_PATCHLEVEL 1 +#define IVTV_DRIVER_VERSION_PATCHLEVEL 2 #define IVTV_VERSION __stringify(IVTV_DRIVER_VERSION_MAJOR) "." __stringify(IVTV_DRIVER_VERSION_MINOR) "." __stringify(IVTV_DRIVER_VERSION_PATCHLEVEL) #define IVTV_DRIVER_VERSION KERNEL_VERSION(IVTV_DRIVER_VERSION_MAJOR,IVTV_DRIVER_VERSION_MINOR,IVTV_DRIVER_VERSION_PATCHLEVEL) diff --git a/drivers/media/video/ivtv/ivtvfb.c b/drivers/media/video/ivtv/ivtvfb.c index 9ff3425891e..be03a712731 100644 --- a/drivers/media/video/ivtv/ivtvfb.c +++ b/drivers/media/video/ivtv/ivtvfb.c @@ -53,6 +53,7 @@ #include "ivtv-i2c.h" #include "ivtv-udma.h" #include "ivtv-mailbox.h" +#include "ivtv-firmware.h" /* card parameters */ static int ivtvfb_card_id = -1; @@ -178,6 +179,12 @@ struct osd_info { struct fb_info ivtvfb_info; struct fb_var_screeninfo ivtvfb_defined; struct fb_fix_screeninfo ivtvfb_fix; + + /* Used for a warm start */ + struct fb_var_screeninfo fbvar_cur; + int blank_cur; + u32 palette_cur[256]; + u32 pan_cur; }; struct ivtv_osd_coords { @@ -199,6 +206,7 @@ static int ivtvfb_get_framebuffer(struct ivtv *itv, u32 *fbbase, u32 data[CX2341X_MBOX_MAX_DATA]; int rc; + ivtv_firmware_check(itv, "ivtvfb_get_framebuffer"); rc = ivtv_vapi_result(itv, data, CX2341X_OSD_GET_FRAMEBUFFER, 0); *fbbase = data[0]; *fblength = data[1]; @@ -581,8 +589,10 @@ static int ivtvfb_set_var(struct ivtv *itv, struct fb_var_screeninfo *var) ivtv_window.height = var->yres; /* Minimum margin cannot be 0, as X won't allow such a mode */ - if (!var->upper_margin) var->upper_margin++; - if (!var->left_margin) var->left_margin++; + if (!var->upper_margin) + var->upper_margin++; + if (!var->left_margin) + var->left_margin++; ivtv_window.top = var->upper_margin - 1; ivtv_window.left = var->left_margin - 1; @@ -595,6 +605,9 @@ static int ivtvfb_set_var(struct ivtv *itv, struct fb_var_screeninfo *var) /* Force update of yuv registers */ itv->yuv_info.yuv_forced_update = 1; + /* Keep a copy of these settings */ + memcpy(&oi->fbvar_cur, var, sizeof(oi->fbvar_cur)); + IVTVFB_DEBUG_INFO("Display size: %dx%d (virtual %dx%d) @ %dbpp\n", var->xres, var->yres, var->xres_virtual, var->yres_virtual, @@ -829,6 +842,8 @@ static int ivtvfb_pan_display(struct fb_var_screeninfo *var, struct fb_info *inf itv->yuv_info.osd_y_pan = var->yoffset; /* Force update of yuv registers */ itv->yuv_info.yuv_forced_update = 1; + /* Remember this value */ + itv->osd_info->pan_cur = osd_pan_index; return 0; } @@ -842,6 +857,7 @@ static int ivtvfb_set_par(struct fb_info *info) rc = ivtvfb_set_var(itv, &info->var); ivtvfb_pan_display(&info->var, info); ivtvfb_get_fix(itv, &info->fix); + ivtv_firmware_check(itv, "ivtvfb_set_par"); return rc; } @@ -859,6 +875,7 @@ static int ivtvfb_setcolreg(unsigned regno, unsigned red, unsigned green, if (info->var.bits_per_pixel <= 8) { write_reg(regno, 0x02a30); write_reg(color, 0x02a34); + itv->osd_info->palette_cur[regno] = color; return 0; } if (regno >= 16) @@ -911,6 +928,7 @@ static int ivtvfb_blank(int blank_mode, struct fb_info *info) ivtv_vapi(itv, CX2341X_OSD_SET_STATE, 1, 0); break; } + itv->osd_info->blank_cur = blank_mode; return 0; } @@ -929,6 +947,21 @@ static struct fb_ops ivtvfb_ops = { .fb_blank = ivtvfb_blank, }; +/* Restore hardware after firmware restart */ +static void ivtvfb_restore(struct ivtv *itv) +{ + struct osd_info *oi = itv->osd_info; + int i; + + ivtvfb_set_var(itv, &oi->fbvar_cur); + ivtvfb_blank(oi->blank_cur, &oi->ivtvfb_info); + for (i = 0; i < 256; i++) { + write_reg(i, 0x02a30); + write_reg(oi->palette_cur[i], 0x02a34); + } + write_reg(oi->pan_cur, 0x02a0c); +} + /* Initialization */ @@ -1192,6 +1225,9 @@ static int ivtvfb_init_card(struct ivtv *itv) /* Enable the osd */ ivtvfb_blank(FB_BLANK_UNBLANK, &itv->osd_info->ivtvfb_info); + /* Enable restart */ + itv->ivtvfb_restore = ivtvfb_restore; + /* Allocate DMA */ ivtv_udma_alloc(itv); return 0; @@ -1203,7 +1239,7 @@ static int __init ivtvfb_callback_init(struct device *dev, void *p) struct v4l2_device *v4l2_dev = dev_get_drvdata(dev); struct ivtv *itv = container_of(v4l2_dev, struct ivtv, v4l2_dev); - if (itv && (itv->v4l2_cap & V4L2_CAP_VIDEO_OUTPUT)) { + if (itv->v4l2_cap & V4L2_CAP_VIDEO_OUTPUT) { if (ivtvfb_init_card(itv) == 0) { IVTVFB_INFO("Framebuffer registered on %s\n", itv->v4l2_dev.name); @@ -1219,13 +1255,14 @@ static int ivtvfb_callback_cleanup(struct device *dev, void *p) struct ivtv *itv = container_of(v4l2_dev, struct ivtv, v4l2_dev); struct osd_info *oi = itv->osd_info; - if (itv && (itv->v4l2_cap & V4L2_CAP_VIDEO_OUTPUT)) { + if (itv->v4l2_cap & V4L2_CAP_VIDEO_OUTPUT) { if (unregister_framebuffer(&itv->osd_info->ivtvfb_info)) { IVTVFB_WARN("Framebuffer %d is in use, cannot unload\n", itv->instance); return 0; } IVTVFB_INFO("Unregister framebuffer %d\n", itv->instance); + itv->ivtvfb_restore = NULL; ivtvfb_blank(FB_BLANK_VSYNC_SUSPEND, &oi->ivtvfb_info); ivtvfb_release_buffers(itv); itv->osd_video_pbase = 0; diff --git a/drivers/media/video/mem2mem_testdev.c b/drivers/media/video/mem2mem_testdev.c index 10ddeccc70e..4525335f9bd 100644 --- a/drivers/media/video/mem2mem_testdev.c +++ b/drivers/media/video/mem2mem_testdev.c @@ -903,14 +903,14 @@ static int m2mtest_release(struct file *file) static unsigned int m2mtest_poll(struct file *file, struct poll_table_struct *wait) { - struct m2mtest_ctx *ctx = (struct m2mtest_ctx *)file->private_data; + struct m2mtest_ctx *ctx = file->private_data; return v4l2_m2m_poll(file, ctx->m2m_ctx, wait); } static int m2mtest_mmap(struct file *file, struct vm_area_struct *vma) { - struct m2mtest_ctx *ctx = (struct m2mtest_ctx *)file->private_data; + struct m2mtest_ctx *ctx = file->private_data; return v4l2_m2m_mmap(file, ctx->m2m_ctx, vma); } diff --git a/drivers/media/video/mt9m111.c b/drivers/media/video/mt9m111.c index fbd0fc79472..31cc3d04bcc 100644 --- a/drivers/media/video/mt9m111.c +++ b/drivers/media/video/mt9m111.c @@ -143,10 +143,10 @@ static const struct mt9m111_datafmt *mt9m111_find_datafmt( } static const struct mt9m111_datafmt mt9m111_colour_fmts[] = { - {V4L2_MBUS_FMT_YUYV8_2X8_LE, V4L2_COLORSPACE_JPEG}, - {V4L2_MBUS_FMT_YVYU8_2X8_LE, V4L2_COLORSPACE_JPEG}, - {V4L2_MBUS_FMT_YUYV8_2X8_BE, V4L2_COLORSPACE_JPEG}, - {V4L2_MBUS_FMT_YVYU8_2X8_BE, V4L2_COLORSPACE_JPEG}, + {V4L2_MBUS_FMT_YUYV8_2X8, V4L2_COLORSPACE_JPEG}, + {V4L2_MBUS_FMT_YVYU8_2X8, V4L2_COLORSPACE_JPEG}, + {V4L2_MBUS_FMT_UYVY8_2X8, V4L2_COLORSPACE_JPEG}, + {V4L2_MBUS_FMT_VYUY8_2X8, V4L2_COLORSPACE_JPEG}, {V4L2_MBUS_FMT_RGB555_2X8_PADHI_LE, V4L2_COLORSPACE_SRGB}, {V4L2_MBUS_FMT_RGB565_2X8_LE, V4L2_COLORSPACE_SRGB}, {V4L2_MBUS_FMT_SBGGR8_1X8, V4L2_COLORSPACE_SRGB}, @@ -505,22 +505,22 @@ static int mt9m111_set_pixfmt(struct i2c_client *client, case V4L2_MBUS_FMT_RGB565_2X8_LE: ret = mt9m111_setfmt_rgb565(client); break; - case V4L2_MBUS_FMT_YUYV8_2X8_BE: + case V4L2_MBUS_FMT_UYVY8_2X8: mt9m111->swap_yuv_y_chromas = 0; mt9m111->swap_yuv_cb_cr = 0; ret = mt9m111_setfmt_yuv(client); break; - case V4L2_MBUS_FMT_YVYU8_2X8_BE: + case V4L2_MBUS_FMT_VYUY8_2X8: mt9m111->swap_yuv_y_chromas = 0; mt9m111->swap_yuv_cb_cr = 1; ret = mt9m111_setfmt_yuv(client); break; - case V4L2_MBUS_FMT_YUYV8_2X8_LE: + case V4L2_MBUS_FMT_YUYV8_2X8: mt9m111->swap_yuv_y_chromas = 1; mt9m111->swap_yuv_cb_cr = 0; ret = mt9m111_setfmt_yuv(client); break; - case V4L2_MBUS_FMT_YVYU8_2X8_LE: + case V4L2_MBUS_FMT_YVYU8_2X8: mt9m111->swap_yuv_y_chromas = 1; mt9m111->swap_yuv_cb_cr = 1; ret = mt9m111_setfmt_yuv(client); diff --git a/drivers/media/video/mt9t112.c b/drivers/media/video/mt9t112.c index e4bf1db9a87..8ec47e42d4d 100644 --- a/drivers/media/video/mt9t112.c +++ b/drivers/media/video/mt9t112.c @@ -121,22 +121,22 @@ struct mt9t112_priv { static const struct mt9t112_format mt9t112_cfmts[] = { { - .code = V4L2_MBUS_FMT_YUYV8_2X8_BE, + .code = V4L2_MBUS_FMT_UYVY8_2X8, .colorspace = V4L2_COLORSPACE_JPEG, .fmt = 1, .order = 0, }, { - .code = V4L2_MBUS_FMT_YVYU8_2X8_BE, + .code = V4L2_MBUS_FMT_VYUY8_2X8, .colorspace = V4L2_COLORSPACE_JPEG, .fmt = 1, .order = 1, }, { - .code = V4L2_MBUS_FMT_YUYV8_2X8_LE, + .code = V4L2_MBUS_FMT_YUYV8_2X8, .colorspace = V4L2_COLORSPACE_JPEG, .fmt = 1, .order = 2, }, { - .code = V4L2_MBUS_FMT_YVYU8_2X8_LE, + .code = V4L2_MBUS_FMT_YVYU8_2X8, .colorspace = V4L2_COLORSPACE_JPEG, .fmt = 1, .order = 3, @@ -972,7 +972,7 @@ static int mt9t112_s_crop(struct v4l2_subdev *sd, struct v4l2_crop *a) struct v4l2_rect *rect = &a->c; return mt9t112_set_params(client, rect->width, rect->height, - V4L2_MBUS_FMT_YUYV8_2X8_BE); + V4L2_MBUS_FMT_UYVY8_2X8); } static int mt9t112_g_fmt(struct v4l2_subdev *sd, @@ -983,7 +983,7 @@ static int mt9t112_g_fmt(struct v4l2_subdev *sd, if (!priv->format) { int ret = mt9t112_set_params(client, VGA_WIDTH, VGA_HEIGHT, - V4L2_MBUS_FMT_YUYV8_2X8_BE); + V4L2_MBUS_FMT_UYVY8_2X8); if (ret < 0) return ret; } diff --git a/drivers/media/video/mx2_camera.c b/drivers/media/video/mx2_camera.c new file mode 100644 index 00000000000..026bef0ba40 --- /dev/null +++ b/drivers/media/video/mx2_camera.c @@ -0,0 +1,1513 @@ +/* + * V4L2 Driver for i.MX27/i.MX25 camera host + * + * Copyright (C) 2008, Sascha Hauer, Pengutronix + * Copyright (C) 2010, Baruch Siach, Orex Computed Radiography + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include <linux/init.h> +#include <linux/module.h> +#include <linux/io.h> +#include <linux/delay.h> +#include <linux/slab.h> +#include <linux/dma-mapping.h> +#include <linux/errno.h> +#include <linux/fs.h> +#include <linux/interrupt.h> +#include <linux/kernel.h> +#include <linux/mm.h> +#include <linux/moduleparam.h> +#include <linux/time.h> +#include <linux/version.h> +#include <linux/device.h> +#include <linux/platform_device.h> +#include <linux/mutex.h> +#include <linux/clk.h> + +#include <media/v4l2-common.h> +#include <media/v4l2-dev.h> +#include <media/videobuf-dma-contig.h> +#include <media/soc_camera.h> +#include <media/soc_mediabus.h> + +#include <linux/videodev2.h> + +#include <mach/mx2_cam.h> +#ifdef CONFIG_MACH_MX27 +#include <mach/dma-mx1-mx2.h> +#endif +#include <mach/hardware.h> + +#include <asm/dma.h> + +#define MX2_CAM_DRV_NAME "mx2-camera" +#define MX2_CAM_VERSION_CODE KERNEL_VERSION(0, 0, 5) +#define MX2_CAM_DRIVER_DESCRIPTION "i.MX2x_Camera" + +/* reset values */ +#define CSICR1_RESET_VAL 0x40000800 +#define CSICR2_RESET_VAL 0x0 +#define CSICR3_RESET_VAL 0x0 + +/* csi control reg 1 */ +#define CSICR1_SWAP16_EN (1 << 31) +#define CSICR1_EXT_VSYNC (1 << 30) +#define CSICR1_EOF_INTEN (1 << 29) +#define CSICR1_PRP_IF_EN (1 << 28) +#define CSICR1_CCIR_MODE (1 << 27) +#define CSICR1_COF_INTEN (1 << 26) +#define CSICR1_SF_OR_INTEN (1 << 25) +#define CSICR1_RF_OR_INTEN (1 << 24) +#define CSICR1_STATFF_LEVEL (3 << 22) +#define CSICR1_STATFF_INTEN (1 << 21) +#define CSICR1_RXFF_LEVEL(l) (((l) & 3) << 19) /* MX27 */ +#define CSICR1_FB2_DMA_INTEN (1 << 20) /* MX25 */ +#define CSICR1_FB1_DMA_INTEN (1 << 19) /* MX25 */ +#define CSICR1_RXFF_INTEN (1 << 18) +#define CSICR1_SOF_POL (1 << 17) +#define CSICR1_SOF_INTEN (1 << 16) +#define CSICR1_MCLKDIV(d) (((d) & 0xF) << 12) +#define CSICR1_HSYNC_POL (1 << 11) +#define CSICR1_CCIR_EN (1 << 10) +#define CSICR1_MCLKEN (1 << 9) +#define CSICR1_FCC (1 << 8) +#define CSICR1_PACK_DIR (1 << 7) +#define CSICR1_CLR_STATFIFO (1 << 6) +#define CSICR1_CLR_RXFIFO (1 << 5) +#define CSICR1_GCLK_MODE (1 << 4) +#define CSICR1_INV_DATA (1 << 3) +#define CSICR1_INV_PCLK (1 << 2) +#define CSICR1_REDGE (1 << 1) + +#define SHIFT_STATFF_LEVEL 22 +#define SHIFT_RXFF_LEVEL 19 +#define SHIFT_MCLKDIV 12 + +/* control reg 3 */ +#define CSICR3_FRMCNT (0xFFFF << 16) +#define CSICR3_FRMCNT_RST (1 << 15) +#define CSICR3_DMA_REFLASH_RFF (1 << 14) +#define CSICR3_DMA_REFLASH_SFF (1 << 13) +#define CSICR3_DMA_REQ_EN_RFF (1 << 12) +#define CSICR3_DMA_REQ_EN_SFF (1 << 11) +#define CSICR3_RXFF_LEVEL(l) (((l) & 7) << 4) /* MX25 */ +#define CSICR3_CSI_SUP (1 << 3) +#define CSICR3_ZERO_PACK_EN (1 << 2) +#define CSICR3_ECC_INT_EN (1 << 1) +#define CSICR3_ECC_AUTO_EN (1 << 0) + +#define SHIFT_FRMCNT 16 + +/* csi status reg */ +#define CSISR_SFF_OR_INT (1 << 25) +#define CSISR_RFF_OR_INT (1 << 24) +#define CSISR_STATFF_INT (1 << 21) +#define CSISR_DMA_TSF_FB2_INT (1 << 20) /* MX25 */ +#define CSISR_DMA_TSF_FB1_INT (1 << 19) /* MX25 */ +#define CSISR_RXFF_INT (1 << 18) +#define CSISR_EOF_INT (1 << 17) +#define CSISR_SOF_INT (1 << 16) +#define CSISR_F2_INT (1 << 15) +#define CSISR_F1_INT (1 << 14) +#define CSISR_COF_INT (1 << 13) +#define CSISR_ECC_INT (1 << 1) +#define CSISR_DRDY (1 << 0) + +#define CSICR1 0x00 +#define CSICR2 0x04 +#define CSISR (cpu_is_mx27() ? 0x08 : 0x18) +#define CSISTATFIFO 0x0c +#define CSIRFIFO 0x10 +#define CSIRXCNT 0x14 +#define CSICR3 (cpu_is_mx27() ? 0x1C : 0x08) +#define CSIDMASA_STATFIFO 0x20 +#define CSIDMATA_STATFIFO 0x24 +#define CSIDMASA_FB1 0x28 +#define CSIDMASA_FB2 0x2c +#define CSIFBUF_PARA 0x30 +#define CSIIMAG_PARA 0x34 + +/* EMMA PrP */ +#define PRP_CNTL 0x00 +#define PRP_INTR_CNTL 0x04 +#define PRP_INTRSTATUS 0x08 +#define PRP_SOURCE_Y_PTR 0x0c +#define PRP_SOURCE_CB_PTR 0x10 +#define PRP_SOURCE_CR_PTR 0x14 +#define PRP_DEST_RGB1_PTR 0x18 +#define PRP_DEST_RGB2_PTR 0x1c +#define PRP_DEST_Y_PTR 0x20 +#define PRP_DEST_CB_PTR 0x24 +#define PRP_DEST_CR_PTR 0x28 +#define PRP_SRC_FRAME_SIZE 0x2c +#define PRP_DEST_CH1_LINE_STRIDE 0x30 +#define PRP_SRC_PIXEL_FORMAT_CNTL 0x34 +#define PRP_CH1_PIXEL_FORMAT_CNTL 0x38 +#define PRP_CH1_OUT_IMAGE_SIZE 0x3c +#define PRP_CH2_OUT_IMAGE_SIZE 0x40 +#define PRP_SRC_LINE_STRIDE 0x44 +#define PRP_CSC_COEF_012 0x48 +#define PRP_CSC_COEF_345 0x4c +#define PRP_CSC_COEF_678 0x50 +#define PRP_CH1_RZ_HORI_COEF1 0x54 +#define PRP_CH1_RZ_HORI_COEF2 0x58 +#define PRP_CH1_RZ_HORI_VALID 0x5c +#define PRP_CH1_RZ_VERT_COEF1 0x60 +#define PRP_CH1_RZ_VERT_COEF2 0x64 +#define PRP_CH1_RZ_VERT_VALID 0x68 +#define PRP_CH2_RZ_HORI_COEF1 0x6c +#define PRP_CH2_RZ_HORI_COEF2 0x70 +#define PRP_CH2_RZ_HORI_VALID 0x74 +#define PRP_CH2_RZ_VERT_COEF1 0x78 +#define PRP_CH2_RZ_VERT_COEF2 0x7c +#define PRP_CH2_RZ_VERT_VALID 0x80 + +#define PRP_CNTL_CH1EN (1 << 0) +#define PRP_CNTL_CH2EN (1 << 1) +#define PRP_CNTL_CSIEN (1 << 2) +#define PRP_CNTL_DATA_IN_YUV420 (0 << 3) +#define PRP_CNTL_DATA_IN_YUV422 (1 << 3) +#define PRP_CNTL_DATA_IN_RGB16 (2 << 3) +#define PRP_CNTL_DATA_IN_RGB32 (3 << 3) +#define PRP_CNTL_CH1_OUT_RGB8 (0 << 5) +#define PRP_CNTL_CH1_OUT_RGB16 (1 << 5) +#define PRP_CNTL_CH1_OUT_RGB32 (2 << 5) +#define PRP_CNTL_CH1_OUT_YUV422 (3 << 5) +#define PRP_CNTL_CH2_OUT_YUV420 (0 << 7) +#define PRP_CNTL_CH2_OUT_YUV422 (1 << 7) +#define PRP_CNTL_CH2_OUT_YUV444 (2 << 7) +#define PRP_CNTL_CH1_LEN (1 << 9) +#define PRP_CNTL_CH2_LEN (1 << 10) +#define PRP_CNTL_SKIP_FRAME (1 << 11) +#define PRP_CNTL_SWRST (1 << 12) +#define PRP_CNTL_CLKEN (1 << 13) +#define PRP_CNTL_WEN (1 << 14) +#define PRP_CNTL_CH1BYP (1 << 15) +#define PRP_CNTL_IN_TSKIP(x) ((x) << 16) +#define PRP_CNTL_CH1_TSKIP(x) ((x) << 19) +#define PRP_CNTL_CH2_TSKIP(x) ((x) << 22) +#define PRP_CNTL_INPUT_FIFO_LEVEL(x) ((x) << 25) +#define PRP_CNTL_RZ_FIFO_LEVEL(x) ((x) << 27) +#define PRP_CNTL_CH2B1EN (1 << 29) +#define PRP_CNTL_CH2B2EN (1 << 30) +#define PRP_CNTL_CH2FEN (1 << 31) + +/* IRQ Enable and status register */ +#define PRP_INTR_RDERR (1 << 0) +#define PRP_INTR_CH1WERR (1 << 1) +#define PRP_INTR_CH2WERR (1 << 2) +#define PRP_INTR_CH1FC (1 << 3) +#define PRP_INTR_CH2FC (1 << 5) +#define PRP_INTR_LBOVF (1 << 7) +#define PRP_INTR_CH2OVF (1 << 8) + +#define mx27_camera_emma(pcdev) (cpu_is_mx27() && pcdev->use_emma) + +#define MAX_VIDEO_MEM 16 + +struct mx2_camera_dev { + struct device *dev; + struct soc_camera_host soc_host; + struct soc_camera_device *icd; + struct clk *clk_csi, *clk_emma; + + unsigned int irq_csi, irq_emma; + void __iomem *base_csi, *base_emma; + unsigned long base_dma; + + struct mx2_camera_platform_data *pdata; + struct resource *res_csi, *res_emma; + unsigned long platform_flags; + + struct list_head capture; + struct list_head active_bufs; + + spinlock_t lock; + + int dma; + struct mx2_buffer *active; + struct mx2_buffer *fb1_active; + struct mx2_buffer *fb2_active; + + int use_emma; + + u32 csicr1; + + void *discard_buffer; + dma_addr_t discard_buffer_dma; + size_t discard_size; +}; + +/* buffer for one video frame */ +struct mx2_buffer { + /* common v4l buffer stuff -- must be first */ + struct videobuf_buffer vb; + + enum v4l2_mbus_pixelcode code; + + int bufnum; +}; + +static void mx2_camera_deactivate(struct mx2_camera_dev *pcdev) +{ + unsigned long flags; + + clk_disable(pcdev->clk_csi); + writel(0, pcdev->base_csi + CSICR1); + if (mx27_camera_emma(pcdev)) { + writel(0, pcdev->base_emma + PRP_CNTL); + } else if (cpu_is_mx25()) { + spin_lock_irqsave(&pcdev->lock, flags); + pcdev->fb1_active = NULL; + pcdev->fb2_active = NULL; + writel(0, pcdev->base_csi + CSIDMASA_FB1); + writel(0, pcdev->base_csi + CSIDMASA_FB2); + spin_unlock_irqrestore(&pcdev->lock, flags); + } +} + +/* + * The following two functions absolutely depend on the fact, that + * there can be only one camera on mx2 camera sensor interface + */ +static int mx2_camera_add_device(struct soc_camera_device *icd) +{ + struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent); + struct mx2_camera_dev *pcdev = ici->priv; + int ret; + u32 csicr1; + + if (pcdev->icd) + return -EBUSY; + + ret = clk_enable(pcdev->clk_csi); + if (ret < 0) + return ret; + + csicr1 = CSICR1_MCLKEN; + + if (mx27_camera_emma(pcdev)) { + csicr1 |= CSICR1_PRP_IF_EN | CSICR1_FCC | + CSICR1_RXFF_LEVEL(0); + } else if (cpu_is_mx27()) + csicr1 |= CSICR1_SOF_INTEN | CSICR1_RXFF_LEVEL(2); + + pcdev->csicr1 = csicr1; + writel(pcdev->csicr1, pcdev->base_csi + CSICR1); + + pcdev->icd = icd; + + dev_info(icd->dev.parent, "Camera driver attached to camera %d\n", + icd->devnum); + + return 0; +} + +static void mx2_camera_remove_device(struct soc_camera_device *icd) +{ + struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent); + struct mx2_camera_dev *pcdev = ici->priv; + + BUG_ON(icd != pcdev->icd); + + dev_info(icd->dev.parent, "Camera driver detached from camera %d\n", + icd->devnum); + + mx2_camera_deactivate(pcdev); + + if (pcdev->discard_buffer) { + dma_free_coherent(ici->v4l2_dev.dev, pcdev->discard_size, + pcdev->discard_buffer, + pcdev->discard_buffer_dma); + pcdev->discard_buffer = NULL; + } + + pcdev->icd = NULL; +} + +#ifdef CONFIG_MACH_MX27 +static void mx27_camera_dma_enable(struct mx2_camera_dev *pcdev) +{ + u32 tmp; + + imx_dma_enable(pcdev->dma); + + tmp = readl(pcdev->base_csi + CSICR1); + tmp |= CSICR1_RF_OR_INTEN; + writel(tmp, pcdev->base_csi + CSICR1); +} + +static irqreturn_t mx27_camera_irq(int irq_csi, void *data) +{ + struct mx2_camera_dev *pcdev = data; + u32 status = readl(pcdev->base_csi + CSISR); + + if (status & CSISR_SOF_INT && pcdev->active) { + u32 tmp; + + tmp = readl(pcdev->base_csi + CSICR1); + writel(tmp | CSICR1_CLR_RXFIFO, pcdev->base_csi + CSICR1); + mx27_camera_dma_enable(pcdev); + } + + writel(CSISR_SOF_INT | CSISR_RFF_OR_INT, pcdev->base_csi + CSISR); + + return IRQ_HANDLED; +} +#else +static irqreturn_t mx27_camera_irq(int irq_csi, void *data) +{ + return IRQ_NONE; +} +#endif /* CONFIG_MACH_MX27 */ + +static void mx25_camera_frame_done(struct mx2_camera_dev *pcdev, int fb, + int state) +{ + struct videobuf_buffer *vb; + struct mx2_buffer *buf; + struct mx2_buffer **fb_active = fb == 1 ? &pcdev->fb1_active : + &pcdev->fb2_active; + u32 fb_reg = fb == 1 ? CSIDMASA_FB1 : CSIDMASA_FB2; + unsigned long flags; + + spin_lock_irqsave(&pcdev->lock, flags); + + vb = &(*fb_active)->vb; + dev_dbg(pcdev->dev, "%s (vb=0x%p) 0x%08lx %d\n", __func__, + vb, vb->baddr, vb->bsize); + + vb->state = state; + do_gettimeofday(&vb->ts); + vb->field_count++; + + wake_up(&vb->done); + + if (list_empty(&pcdev->capture)) { + buf = NULL; + writel(0, pcdev->base_csi + fb_reg); + } else { + buf = list_entry(pcdev->capture.next, struct mx2_buffer, + vb.queue); + vb = &buf->vb; + list_del(&vb->queue); + vb->state = VIDEOBUF_ACTIVE; + writel(videobuf_to_dma_contig(vb), pcdev->base_csi + fb_reg); + } + + *fb_active = buf; + + spin_unlock_irqrestore(&pcdev->lock, flags); +} + +static irqreturn_t mx25_camera_irq(int irq_csi, void *data) +{ + struct mx2_camera_dev *pcdev = data; + u32 status = readl(pcdev->base_csi + CSISR); + + if (status & CSISR_DMA_TSF_FB1_INT) + mx25_camera_frame_done(pcdev, 1, VIDEOBUF_DONE); + else if (status & CSISR_DMA_TSF_FB2_INT) + mx25_camera_frame_done(pcdev, 2, VIDEOBUF_DONE); + + /* FIXME: handle CSISR_RFF_OR_INT */ + + writel(status, pcdev->base_csi + CSISR); + + return IRQ_HANDLED; +} + +/* + * Videobuf operations + */ +static int mx2_videobuf_setup(struct videobuf_queue *vq, unsigned int *count, + unsigned int *size) +{ + struct soc_camera_device *icd = vq->priv_data; + int bytes_per_line = soc_mbus_bytes_per_line(icd->user_width, + icd->current_fmt->host_fmt); + + dev_dbg(&icd->dev, "count=%d, size=%d\n", *count, *size); + + if (bytes_per_line < 0) + return bytes_per_line; + + *size = bytes_per_line * icd->user_height; + + if (0 == *count) + *count = 32; + if (*size * *count > MAX_VIDEO_MEM * 1024 * 1024) + *count = (MAX_VIDEO_MEM * 1024 * 1024) / *size; + + return 0; +} + +static void free_buffer(struct videobuf_queue *vq, struct mx2_buffer *buf) +{ + struct soc_camera_device *icd = vq->priv_data; + struct videobuf_buffer *vb = &buf->vb; + + dev_dbg(&icd->dev, "%s (vb=0x%p) 0x%08lx %d\n", __func__, + vb, vb->baddr, vb->bsize); + + /* + * This waits until this buffer is out of danger, i.e., until it is no + * longer in STATE_QUEUED or STATE_ACTIVE + */ + videobuf_waiton(vb, 0, 0); + + videobuf_dma_contig_free(vq, vb); + dev_dbg(&icd->dev, "%s freed\n", __func__); + + vb->state = VIDEOBUF_NEEDS_INIT; +} + +static int mx2_videobuf_prepare(struct videobuf_queue *vq, + struct videobuf_buffer *vb, enum v4l2_field field) +{ + struct soc_camera_device *icd = vq->priv_data; + struct mx2_buffer *buf = container_of(vb, struct mx2_buffer, vb); + int bytes_per_line = soc_mbus_bytes_per_line(icd->user_width, + icd->current_fmt->host_fmt); + int ret = 0; + + dev_dbg(&icd->dev, "%s (vb=0x%p) 0x%08lx %d\n", __func__, + vb, vb->baddr, vb->bsize); + + if (bytes_per_line < 0) + return bytes_per_line; + +#ifdef DEBUG + /* + * This can be useful if you want to see if we actually fill + * the buffer with something + */ + memset((void *)vb->baddr, 0xaa, vb->bsize); +#endif + + if (buf->code != icd->current_fmt->code || + vb->width != icd->user_width || + vb->height != icd->user_height || + vb->field != field) { + buf->code = icd->current_fmt->code; + vb->width = icd->user_width; + vb->height = icd->user_height; + vb->field = field; + vb->state = VIDEOBUF_NEEDS_INIT; + } + + vb->size = bytes_per_line * vb->height; + if (vb->baddr && vb->bsize < vb->size) { + ret = -EINVAL; + goto out; + } + + if (vb->state == VIDEOBUF_NEEDS_INIT) { + ret = videobuf_iolock(vq, vb, NULL); + if (ret) + goto fail; + + vb->state = VIDEOBUF_PREPARED; + } + + return 0; + +fail: + free_buffer(vq, buf); +out: + return ret; +} + +static void mx2_videobuf_queue(struct videobuf_queue *vq, + struct videobuf_buffer *vb) +{ + struct soc_camera_device *icd = vq->priv_data; + struct soc_camera_host *ici = + to_soc_camera_host(icd->dev.parent); + struct mx2_camera_dev *pcdev = ici->priv; + struct mx2_buffer *buf = container_of(vb, struct mx2_buffer, vb); + unsigned long flags; + + dev_dbg(&icd->dev, "%s (vb=0x%p) 0x%08lx %d\n", __func__, + vb, vb->baddr, vb->bsize); + + spin_lock_irqsave(&pcdev->lock, flags); + + vb->state = VIDEOBUF_QUEUED; + list_add_tail(&vb->queue, &pcdev->capture); + + if (mx27_camera_emma(pcdev)) { + goto out; +#ifdef CONFIG_MACH_MX27 + } else if (cpu_is_mx27()) { + int ret; + + if (pcdev->active == NULL) { + ret = imx_dma_setup_single(pcdev->dma, + videobuf_to_dma_contig(vb), vb->size, + (u32)pcdev->base_dma + 0x10, + DMA_MODE_READ); + if (ret) { + vb->state = VIDEOBUF_ERROR; + wake_up(&vb->done); + goto out; + } + + vb->state = VIDEOBUF_ACTIVE; + pcdev->active = buf; + } +#endif + } else { /* cpu_is_mx25() */ + u32 csicr3, dma_inten = 0; + + if (pcdev->fb1_active == NULL) { + writel(videobuf_to_dma_contig(vb), + pcdev->base_csi + CSIDMASA_FB1); + pcdev->fb1_active = buf; + dma_inten = CSICR1_FB1_DMA_INTEN; + } else if (pcdev->fb2_active == NULL) { + writel(videobuf_to_dma_contig(vb), + pcdev->base_csi + CSIDMASA_FB2); + pcdev->fb2_active = buf; + dma_inten = CSICR1_FB2_DMA_INTEN; + } + + if (dma_inten) { + list_del(&vb->queue); + vb->state = VIDEOBUF_ACTIVE; + + csicr3 = readl(pcdev->base_csi + CSICR3); + + /* Reflash DMA */ + writel(csicr3 | CSICR3_DMA_REFLASH_RFF, + pcdev->base_csi + CSICR3); + + /* clear & enable interrupts */ + writel(dma_inten, pcdev->base_csi + CSISR); + pcdev->csicr1 |= dma_inten; + writel(pcdev->csicr1, pcdev->base_csi + CSICR1); + + /* enable DMA */ + csicr3 |= CSICR3_DMA_REQ_EN_RFF | CSICR3_RXFF_LEVEL(1); + writel(csicr3, pcdev->base_csi + CSICR3); + } + } + +out: + spin_unlock_irqrestore(&pcdev->lock, flags); +} + +static void mx2_videobuf_release(struct videobuf_queue *vq, + struct videobuf_buffer *vb) +{ + struct soc_camera_device *icd = vq->priv_data; + struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent); + struct mx2_camera_dev *pcdev = ici->priv; + struct mx2_buffer *buf = container_of(vb, struct mx2_buffer, vb); + unsigned long flags; + +#ifdef DEBUG + dev_dbg(&icd->dev, "%s (vb=0x%p) 0x%08lx %d\n", __func__, + vb, vb->baddr, vb->bsize); + + switch (vb->state) { + case VIDEOBUF_ACTIVE: + dev_info(&icd->dev, "%s (active)\n", __func__); + break; + case VIDEOBUF_QUEUED: + dev_info(&icd->dev, "%s (queued)\n", __func__); + break; + case VIDEOBUF_PREPARED: + dev_info(&icd->dev, "%s (prepared)\n", __func__); + break; + default: + dev_info(&icd->dev, "%s (unknown) %d\n", __func__, + vb->state); + break; + } +#endif + + /* + * Terminate only queued but inactive buffers. Active buffers are + * released when they become inactive after videobuf_waiton(). + * + * FIXME: implement forced termination of active buffers, so that the + * user won't get stuck in an uninterruptible state. This requires a + * specific handling for each of the three DMA types that this driver + * supports. + */ + spin_lock_irqsave(&pcdev->lock, flags); + if (vb->state == VIDEOBUF_QUEUED) { + list_del(&vb->queue); + vb->state = VIDEOBUF_ERROR; + } + spin_unlock_irqrestore(&pcdev->lock, flags); + + free_buffer(vq, buf); +} + +static struct videobuf_queue_ops mx2_videobuf_ops = { + .buf_setup = mx2_videobuf_setup, + .buf_prepare = mx2_videobuf_prepare, + .buf_queue = mx2_videobuf_queue, + .buf_release = mx2_videobuf_release, +}; + +static void mx2_camera_init_videobuf(struct videobuf_queue *q, + struct soc_camera_device *icd) +{ + struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent); + struct mx2_camera_dev *pcdev = ici->priv; + + videobuf_queue_dma_contig_init(q, &mx2_videobuf_ops, pcdev->dev, + &pcdev->lock, V4L2_BUF_TYPE_VIDEO_CAPTURE, + V4L2_FIELD_NONE, sizeof(struct mx2_buffer), icd); +} + +#define MX2_BUS_FLAGS (SOCAM_DATAWIDTH_8 | \ + SOCAM_MASTER | \ + SOCAM_VSYNC_ACTIVE_HIGH | \ + SOCAM_VSYNC_ACTIVE_LOW | \ + SOCAM_HSYNC_ACTIVE_HIGH | \ + SOCAM_HSYNC_ACTIVE_LOW | \ + SOCAM_PCLK_SAMPLE_RISING | \ + SOCAM_PCLK_SAMPLE_FALLING | \ + SOCAM_DATA_ACTIVE_HIGH | \ + SOCAM_DATA_ACTIVE_LOW) + +static int mx27_camera_emma_prp_reset(struct mx2_camera_dev *pcdev) +{ + u32 cntl; + int count = 0; + + cntl = readl(pcdev->base_emma + PRP_CNTL); + writel(PRP_CNTL_SWRST, pcdev->base_emma + PRP_CNTL); + while (count++ < 100) { + if (!(readl(pcdev->base_emma + PRP_CNTL) & PRP_CNTL_SWRST)) + return 0; + barrier(); + udelay(1); + } + + return -ETIMEDOUT; +} + +static void mx27_camera_emma_buf_init(struct soc_camera_device *icd, + int bytesperline) +{ + struct soc_camera_host *ici = + to_soc_camera_host(icd->dev.parent); + struct mx2_camera_dev *pcdev = ici->priv; + + writel(pcdev->discard_buffer_dma, + pcdev->base_emma + PRP_DEST_RGB1_PTR); + writel(pcdev->discard_buffer_dma, + pcdev->base_emma + PRP_DEST_RGB2_PTR); + + /* + * We only use the EMMA engine to get rid of the broken + * DMA Engine. No color space consversion at the moment. + * We adjust incoming and outgoing pixelformat to rgb16 + * and adjust the bytesperline accordingly. + */ + writel(PRP_CNTL_CH1EN | + PRP_CNTL_CSIEN | + PRP_CNTL_DATA_IN_RGB16 | + PRP_CNTL_CH1_OUT_RGB16 | + PRP_CNTL_CH1_LEN | + PRP_CNTL_CH1BYP | + PRP_CNTL_CH1_TSKIP(0) | + PRP_CNTL_IN_TSKIP(0), + pcdev->base_emma + PRP_CNTL); + + writel(((bytesperline >> 1) << 16) | icd->user_height, + pcdev->base_emma + PRP_SRC_FRAME_SIZE); + writel(((bytesperline >> 1) << 16) | icd->user_height, + pcdev->base_emma + PRP_CH1_OUT_IMAGE_SIZE); + writel(bytesperline, + pcdev->base_emma + PRP_DEST_CH1_LINE_STRIDE); + writel(0x2ca00565, /* RGB565 */ + pcdev->base_emma + PRP_SRC_PIXEL_FORMAT_CNTL); + writel(0x2ca00565, /* RGB565 */ + pcdev->base_emma + PRP_CH1_PIXEL_FORMAT_CNTL); + + /* Enable interrupts */ + writel(PRP_INTR_RDERR | + PRP_INTR_CH1WERR | + PRP_INTR_CH2WERR | + PRP_INTR_CH1FC | + PRP_INTR_CH2FC | + PRP_INTR_LBOVF | + PRP_INTR_CH2OVF, + pcdev->base_emma + PRP_INTR_CNTL); +} + +static int mx2_camera_set_bus_param(struct soc_camera_device *icd, + __u32 pixfmt) +{ + struct soc_camera_host *ici = + to_soc_camera_host(icd->dev.parent); + struct mx2_camera_dev *pcdev = ici->priv; + unsigned long camera_flags, common_flags; + int ret = 0; + int bytesperline; + u32 csicr1 = pcdev->csicr1; + + camera_flags = icd->ops->query_bus_param(icd); + + common_flags = soc_camera_bus_param_compatible(camera_flags, + MX2_BUS_FLAGS); + if (!common_flags) + return -EINVAL; + + if ((common_flags & SOCAM_HSYNC_ACTIVE_HIGH) && + (common_flags & SOCAM_HSYNC_ACTIVE_LOW)) { + if (pcdev->platform_flags & MX2_CAMERA_HSYNC_HIGH) + common_flags &= ~SOCAM_HSYNC_ACTIVE_LOW; + else + common_flags &= ~SOCAM_HSYNC_ACTIVE_HIGH; + } + + if ((common_flags & SOCAM_PCLK_SAMPLE_RISING) && + (common_flags & SOCAM_PCLK_SAMPLE_FALLING)) { + if (pcdev->platform_flags & MX2_CAMERA_PCLK_SAMPLE_RISING) + common_flags &= ~SOCAM_PCLK_SAMPLE_FALLING; + else + common_flags &= ~SOCAM_PCLK_SAMPLE_RISING; + } + + ret = icd->ops->set_bus_param(icd, common_flags); + if (ret < 0) + return ret; + + if (common_flags & SOCAM_PCLK_SAMPLE_FALLING) + csicr1 |= CSICR1_INV_PCLK; + if (common_flags & SOCAM_VSYNC_ACTIVE_HIGH) + csicr1 |= CSICR1_SOF_POL; + if (common_flags & SOCAM_HSYNC_ACTIVE_HIGH) + csicr1 |= CSICR1_HSYNC_POL; + if (pcdev->platform_flags & MX2_CAMERA_SWAP16) + csicr1 |= CSICR1_SWAP16_EN; + if (pcdev->platform_flags & MX2_CAMERA_EXT_VSYNC) + csicr1 |= CSICR1_EXT_VSYNC; + if (pcdev->platform_flags & MX2_CAMERA_CCIR) + csicr1 |= CSICR1_CCIR_EN; + if (pcdev->platform_flags & MX2_CAMERA_CCIR_INTERLACE) + csicr1 |= CSICR1_CCIR_MODE; + if (pcdev->platform_flags & MX2_CAMERA_GATED_CLOCK) + csicr1 |= CSICR1_GCLK_MODE; + if (pcdev->platform_flags & MX2_CAMERA_INV_DATA) + csicr1 |= CSICR1_INV_DATA; + if (pcdev->platform_flags & MX2_CAMERA_PACK_DIR_MSB) + csicr1 |= CSICR1_PACK_DIR; + + pcdev->csicr1 = csicr1; + + bytesperline = soc_mbus_bytes_per_line(icd->user_width, + icd->current_fmt->host_fmt); + if (bytesperline < 0) + return bytesperline; + + if (mx27_camera_emma(pcdev)) { + ret = mx27_camera_emma_prp_reset(pcdev); + if (ret) + return ret; + + if (pcdev->discard_buffer) + dma_free_coherent(ici->v4l2_dev.dev, + pcdev->discard_size, pcdev->discard_buffer, + pcdev->discard_buffer_dma); + + /* + * I didn't manage to properly enable/disable the prp + * on a per frame basis during running transfers, + * thus we allocate a buffer here and use it to + * discard frames when no buffer is available. + * Feel free to work on this ;) + */ + pcdev->discard_size = icd->user_height * bytesperline; + pcdev->discard_buffer = dma_alloc_coherent(ici->v4l2_dev.dev, + pcdev->discard_size, &pcdev->discard_buffer_dma, + GFP_KERNEL); + if (!pcdev->discard_buffer) + return -ENOMEM; + + mx27_camera_emma_buf_init(icd, bytesperline); + } else if (cpu_is_mx25()) { + writel((bytesperline * icd->user_height) >> 2, + pcdev->base_csi + CSIRXCNT); + writel((bytesperline << 16) | icd->user_height, + pcdev->base_csi + CSIIMAG_PARA); + } + + writel(pcdev->csicr1, pcdev->base_csi + CSICR1); + + return 0; +} + +static int mx2_camera_set_crop(struct soc_camera_device *icd, + struct v4l2_crop *a) +{ + struct v4l2_rect *rect = &a->c; + struct v4l2_subdev *sd = soc_camera_to_subdev(icd); + struct v4l2_mbus_framefmt mf; + int ret; + + soc_camera_limit_side(&rect->left, &rect->width, 0, 2, 4096); + soc_camera_limit_side(&rect->top, &rect->height, 0, 2, 4096); + + ret = v4l2_subdev_call(sd, video, s_crop, a); + if (ret < 0) + return ret; + + /* The capture device might have changed its output */ + ret = v4l2_subdev_call(sd, video, g_mbus_fmt, &mf); + if (ret < 0) + return ret; + + dev_dbg(icd->dev.parent, "Sensor cropped %dx%d\n", + mf.width, mf.height); + + icd->user_width = mf.width; + icd->user_height = mf.height; + + return ret; +} + +static int mx2_camera_set_fmt(struct soc_camera_device *icd, + struct v4l2_format *f) +{ + struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent); + struct mx2_camera_dev *pcdev = ici->priv; + struct v4l2_subdev *sd = soc_camera_to_subdev(icd); + const struct soc_camera_format_xlate *xlate; + struct v4l2_pix_format *pix = &f->fmt.pix; + struct v4l2_mbus_framefmt mf; + int ret; + + xlate = soc_camera_xlate_by_fourcc(icd, pix->pixelformat); + if (!xlate) { + dev_warn(icd->dev.parent, "Format %x not found\n", + pix->pixelformat); + return -EINVAL; + } + + /* eMMA can only do RGB565 */ + if (mx27_camera_emma(pcdev) && pix->pixelformat != V4L2_PIX_FMT_RGB565) + return -EINVAL; + + mf.width = pix->width; + mf.height = pix->height; + mf.field = pix->field; + mf.colorspace = pix->colorspace; + mf.code = xlate->code; + + ret = v4l2_subdev_call(sd, video, s_mbus_fmt, &mf); + if (ret < 0 && ret != -ENOIOCTLCMD) + return ret; + + if (mf.code != xlate->code) + return -EINVAL; + + pix->width = mf.width; + pix->height = mf.height; + pix->field = mf.field; + pix->colorspace = mf.colorspace; + icd->current_fmt = xlate; + + return 0; +} + +static int mx2_camera_try_fmt(struct soc_camera_device *icd, + struct v4l2_format *f) +{ + struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent); + struct mx2_camera_dev *pcdev = ici->priv; + struct v4l2_subdev *sd = soc_camera_to_subdev(icd); + const struct soc_camera_format_xlate *xlate; + struct v4l2_pix_format *pix = &f->fmt.pix; + struct v4l2_mbus_framefmt mf; + __u32 pixfmt = pix->pixelformat; + unsigned int width_limit; + int ret; + + xlate = soc_camera_xlate_by_fourcc(icd, pixfmt); + if (pixfmt && !xlate) { + dev_warn(icd->dev.parent, "Format %x not found\n", pixfmt); + return -EINVAL; + } + + /* FIXME: implement MX27 limits */ + + /* eMMA can only do RGB565 */ + if (mx27_camera_emma(pcdev) && pixfmt != V4L2_PIX_FMT_RGB565) + return -EINVAL; + + /* limit to MX25 hardware capabilities */ + if (cpu_is_mx25()) { + if (xlate->host_fmt->bits_per_sample <= 8) + width_limit = 0xffff * 4; + else + width_limit = 0xffff * 2; + /* CSIIMAG_PARA limit */ + if (pix->width > width_limit) + pix->width = width_limit; + if (pix->height > 0xffff) + pix->height = 0xffff; + + pix->bytesperline = soc_mbus_bytes_per_line(pix->width, + xlate->host_fmt); + if (pix->bytesperline < 0) + return pix->bytesperline; + pix->sizeimage = pix->height * pix->bytesperline; + if (pix->sizeimage > (4 * 0x3ffff)) { /* CSIRXCNT limit */ + dev_warn(icd->dev.parent, + "Image size (%u) above limit\n", + pix->sizeimage); + return -EINVAL; + } + } + + /* limit to sensor capabilities */ + mf.width = pix->width; + mf.height = pix->height; + mf.field = pix->field; + mf.colorspace = pix->colorspace; + mf.code = xlate->code; + + ret = v4l2_subdev_call(sd, video, try_mbus_fmt, &mf); + if (ret < 0) + return ret; + + if (mf.field == V4L2_FIELD_ANY) + mf.field = V4L2_FIELD_NONE; + if (mf.field != V4L2_FIELD_NONE) { + dev_err(icd->dev.parent, "Field type %d unsupported.\n", + mf.field); + return -EINVAL; + } + + pix->width = mf.width; + pix->height = mf.height; + pix->field = mf.field; + pix->colorspace = mf.colorspace; + + return 0; +} + +static int mx2_camera_querycap(struct soc_camera_host *ici, + struct v4l2_capability *cap) +{ + /* cap->name is set by the friendly caller:-> */ + strlcpy(cap->card, MX2_CAM_DRIVER_DESCRIPTION, sizeof(cap->card)); + cap->version = MX2_CAM_VERSION_CODE; + cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_STREAMING; + + return 0; +} + +static int mx2_camera_reqbufs(struct soc_camera_file *icf, + struct v4l2_requestbuffers *p) +{ + int i; + + for (i = 0; i < p->count; i++) { + struct mx2_buffer *buf = container_of(icf->vb_vidq.bufs[i], + struct mx2_buffer, vb); + INIT_LIST_HEAD(&buf->vb.queue); + } + + return 0; +} + +#ifdef CONFIG_MACH_MX27 +static void mx27_camera_frame_done(struct mx2_camera_dev *pcdev, int state) +{ + struct videobuf_buffer *vb; + struct mx2_buffer *buf; + unsigned long flags; + int ret; + + spin_lock_irqsave(&pcdev->lock, flags); + + if (!pcdev->active) { + dev_err(pcdev->dev, "%s called with no active buffer!\n", + __func__); + goto out; + } + + vb = &pcdev->active->vb; + buf = container_of(vb, struct mx2_buffer, vb); + WARN_ON(list_empty(&vb->queue)); + dev_dbg(pcdev->dev, "%s (vb=0x%p) 0x%08lx %d\n", __func__, + vb, vb->baddr, vb->bsize); + + /* _init is used to debug races, see comment in pxa_camera_reqbufs() */ + list_del_init(&vb->queue); + vb->state = state; + do_gettimeofday(&vb->ts); + vb->field_count++; + + wake_up(&vb->done); + + if (list_empty(&pcdev->capture)) { + pcdev->active = NULL; + goto out; + } + + pcdev->active = list_entry(pcdev->capture.next, + struct mx2_buffer, vb.queue); + + vb = &pcdev->active->vb; + vb->state = VIDEOBUF_ACTIVE; + + ret = imx_dma_setup_single(pcdev->dma, videobuf_to_dma_contig(vb), + vb->size, (u32)pcdev->base_dma + 0x10, DMA_MODE_READ); + + if (ret) { + vb->state = VIDEOBUF_ERROR; + pcdev->active = NULL; + wake_up(&vb->done); + } + +out: + spin_unlock_irqrestore(&pcdev->lock, flags); +} + +static void mx27_camera_dma_err_callback(int channel, void *data, int err) +{ + struct mx2_camera_dev *pcdev = data; + + mx27_camera_frame_done(pcdev, VIDEOBUF_ERROR); +} + +static void mx27_camera_dma_callback(int channel, void *data) +{ + struct mx2_camera_dev *pcdev = data; + + mx27_camera_frame_done(pcdev, VIDEOBUF_DONE); +} + +#define DMA_REQ_CSI_RX 31 /* FIXME: Add this to a resource */ + +static int __devinit mx27_camera_dma_init(struct platform_device *pdev, + struct mx2_camera_dev *pcdev) +{ + int err; + + pcdev->dma = imx_dma_request_by_prio("CSI RX DMA", DMA_PRIO_HIGH); + if (pcdev->dma < 0) { + dev_err(&pdev->dev, "%s failed to request DMA channel\n", + __func__); + return pcdev->dma; + } + + err = imx_dma_setup_handlers(pcdev->dma, mx27_camera_dma_callback, + mx27_camera_dma_err_callback, pcdev); + if (err) { + dev_err(&pdev->dev, "%s failed to set DMA callback\n", + __func__); + goto err_out; + } + + err = imx_dma_config_channel(pcdev->dma, + IMX_DMA_MEMSIZE_32 | IMX_DMA_TYPE_FIFO, + IMX_DMA_MEMSIZE_32 | IMX_DMA_TYPE_LINEAR, + DMA_REQ_CSI_RX, 1); + if (err) { + dev_err(&pdev->dev, "%s failed to config DMA channel\n", + __func__); + goto err_out; + } + + imx_dma_config_burstlen(pcdev->dma, 64); + + return 0; + +err_out: + imx_dma_free(pcdev->dma); + + return err; +} +#endif /* CONFIG_MACH_MX27 */ + +static unsigned int mx2_camera_poll(struct file *file, poll_table *pt) +{ + struct soc_camera_file *icf = file->private_data; + + return videobuf_poll_stream(file, &icf->vb_vidq, pt); +} + +static struct soc_camera_host_ops mx2_soc_camera_host_ops = { + .owner = THIS_MODULE, + .add = mx2_camera_add_device, + .remove = mx2_camera_remove_device, + .set_fmt = mx2_camera_set_fmt, + .set_crop = mx2_camera_set_crop, + .try_fmt = mx2_camera_try_fmt, + .init_videobuf = mx2_camera_init_videobuf, + .reqbufs = mx2_camera_reqbufs, + .poll = mx2_camera_poll, + .querycap = mx2_camera_querycap, + .set_bus_param = mx2_camera_set_bus_param, +}; + +static void mx27_camera_frame_done_emma(struct mx2_camera_dev *pcdev, + int bufnum, int state) +{ + struct mx2_buffer *buf; + struct videobuf_buffer *vb; + unsigned long phys; + + if (!list_empty(&pcdev->active_bufs)) { + buf = list_entry(pcdev->active_bufs.next, + struct mx2_buffer, vb.queue); + + BUG_ON(buf->bufnum != bufnum); + + vb = &buf->vb; +#ifdef DEBUG + phys = videobuf_to_dma_contig(vb); + if (readl(pcdev->base_emma + PRP_DEST_RGB1_PTR + 4 * bufnum) + != phys) { + dev_err(pcdev->dev, "%p != %p\n", phys, + readl(pcdev->base_emma + + PRP_DEST_RGB1_PTR + + 4 * bufnum)); + } +#endif + dev_dbg(pcdev->dev, "%s (vb=0x%p) 0x%08lx %d\n", __func__, vb, + vb->baddr, vb->bsize); + + list_del(&vb->queue); + vb->state = state; + do_gettimeofday(&vb->ts); + vb->field_count++; + + wake_up(&vb->done); + } + + if (list_empty(&pcdev->capture)) { + writel(pcdev->discard_buffer_dma, pcdev->base_emma + + PRP_DEST_RGB1_PTR + 4 * bufnum); + return; + } + + buf = list_entry(pcdev->capture.next, + struct mx2_buffer, vb.queue); + + buf->bufnum = bufnum; + + list_move_tail(pcdev->capture.next, &pcdev->active_bufs); + + vb = &buf->vb; + vb->state = VIDEOBUF_ACTIVE; + + phys = videobuf_to_dma_contig(vb); + writel(phys, pcdev->base_emma + PRP_DEST_RGB1_PTR + 4 * bufnum); +} + +static irqreturn_t mx27_camera_emma_irq(int irq_emma, void *data) +{ + struct mx2_camera_dev *pcdev = data; + unsigned int status = readl(pcdev->base_emma + PRP_INTRSTATUS); + struct mx2_buffer *buf; + + if (status & (1 << 7)) { /* overflow */ + u32 cntl; + /* + * We only disable channel 1 here since this is the only + * enabled channel + * + * FIXME: the correct DMA overflow handling should be resetting + * the buffer, returning an error frame, and continuing with + * the next one. + */ + cntl = readl(pcdev->base_emma + PRP_CNTL); + writel(cntl & ~PRP_CNTL_CH1EN, pcdev->base_emma + PRP_CNTL); + writel(cntl, pcdev->base_emma + PRP_CNTL); + } + if ((status & (3 << 5)) == (3 << 5) + && !list_empty(&pcdev->active_bufs)) { + /* + * Both buffers have triggered, process the one we're expecting + * to first + */ + buf = list_entry(pcdev->active_bufs.next, + struct mx2_buffer, vb.queue); + mx27_camera_frame_done_emma(pcdev, buf->bufnum, VIDEOBUF_DONE); + status &= ~(1 << (6 - buf->bufnum)); /* mark processed */ + } + if (status & (1 << 6)) + mx27_camera_frame_done_emma(pcdev, 0, VIDEOBUF_DONE); + if (status & (1 << 5)) + mx27_camera_frame_done_emma(pcdev, 1, VIDEOBUF_DONE); + + writel(status, pcdev->base_emma + PRP_INTRSTATUS); + + return IRQ_HANDLED; +} + +static int __devinit mx27_camera_emma_init(struct mx2_camera_dev *pcdev) +{ + struct resource *res_emma = pcdev->res_emma; + int err = 0; + + if (!request_mem_region(res_emma->start, resource_size(res_emma), + MX2_CAM_DRV_NAME)) { + err = -EBUSY; + goto out; + } + + pcdev->base_emma = ioremap(res_emma->start, resource_size(res_emma)); + if (!pcdev->base_emma) { + err = -ENOMEM; + goto exit_release; + } + + err = request_irq(pcdev->irq_emma, mx27_camera_emma_irq, 0, + MX2_CAM_DRV_NAME, pcdev); + if (err) { + dev_err(pcdev->dev, "Camera EMMA interrupt register failed \n"); + goto exit_iounmap; + } + + pcdev->clk_emma = clk_get(NULL, "emma"); + if (IS_ERR(pcdev->clk_emma)) { + err = PTR_ERR(pcdev->clk_emma); + goto exit_free_irq; + } + + clk_enable(pcdev->clk_emma); + + err = mx27_camera_emma_prp_reset(pcdev); + if (err) + goto exit_clk_emma_put; + + return err; + +exit_clk_emma_put: + clk_disable(pcdev->clk_emma); + clk_put(pcdev->clk_emma); +exit_free_irq: + free_irq(pcdev->irq_emma, pcdev); +exit_iounmap: + iounmap(pcdev->base_emma); +exit_release: + release_mem_region(res_emma->start, resource_size(res_emma)); +out: + return err; +} + +static int __devinit mx2_camera_probe(struct platform_device *pdev) +{ + struct mx2_camera_dev *pcdev; + struct resource *res_csi, *res_emma; + void __iomem *base_csi; + int irq_csi, irq_emma; + irq_handler_t mx2_cam_irq_handler = cpu_is_mx25() ? mx25_camera_irq + : mx27_camera_irq; + int err = 0; + + dev_dbg(&pdev->dev, "initialising\n"); + + res_csi = platform_get_resource(pdev, IORESOURCE_MEM, 0); + irq_csi = platform_get_irq(pdev, 0); + if (res_csi == NULL || irq_csi < 0) { + dev_err(&pdev->dev, "Missing platform resources data\n"); + err = -ENODEV; + goto exit; + } + + pcdev = kzalloc(sizeof(*pcdev), GFP_KERNEL); + if (!pcdev) { + dev_err(&pdev->dev, "Could not allocate pcdev\n"); + err = -ENOMEM; + goto exit; + } + + pcdev->clk_csi = clk_get(&pdev->dev, NULL); + if (IS_ERR(pcdev->clk_csi)) { + err = PTR_ERR(pcdev->clk_csi); + goto exit_kfree; + } + + dev_dbg(&pdev->dev, "Camera clock frequency: %ld\n", + clk_get_rate(pcdev->clk_csi)); + + /* Initialize DMA */ +#ifdef CONFIG_MACH_MX27 + if (cpu_is_mx27()) { + err = mx27_camera_dma_init(pdev, pcdev); + if (err) + goto exit_clk_put; + } +#endif /* CONFIG_MACH_MX27 */ + + pcdev->res_csi = res_csi; + pcdev->pdata = pdev->dev.platform_data; + if (pcdev->pdata) { + long rate; + + pcdev->platform_flags = pcdev->pdata->flags; + + rate = clk_round_rate(pcdev->clk_csi, pcdev->pdata->clk * 2); + if (rate <= 0) { + err = -ENODEV; + goto exit_dma_free; + } + err = clk_set_rate(pcdev->clk_csi, rate); + if (err < 0) + goto exit_dma_free; + } + + INIT_LIST_HEAD(&pcdev->capture); + INIT_LIST_HEAD(&pcdev->active_bufs); + spin_lock_init(&pcdev->lock); + + /* + * Request the regions. + */ + if (!request_mem_region(res_csi->start, resource_size(res_csi), + MX2_CAM_DRV_NAME)) { + err = -EBUSY; + goto exit_dma_free; + } + + base_csi = ioremap(res_csi->start, resource_size(res_csi)); + if (!base_csi) { + err = -ENOMEM; + goto exit_release; + } + pcdev->irq_csi = irq_csi; + pcdev->base_csi = base_csi; + pcdev->base_dma = res_csi->start; + pcdev->dev = &pdev->dev; + + err = request_irq(pcdev->irq_csi, mx2_cam_irq_handler, 0, + MX2_CAM_DRV_NAME, pcdev); + if (err) { + dev_err(pcdev->dev, "Camera interrupt register failed \n"); + goto exit_iounmap; + } + + if (cpu_is_mx27()) { + /* EMMA support */ + res_emma = platform_get_resource(pdev, IORESOURCE_MEM, 1); + irq_emma = platform_get_irq(pdev, 1); + + if (res_emma && irq_emma >= 0) { + dev_info(&pdev->dev, "Using EMMA\n"); + pcdev->use_emma = 1; + pcdev->res_emma = res_emma; + pcdev->irq_emma = irq_emma; + if (mx27_camera_emma_init(pcdev)) + goto exit_free_irq; + } + } + + pcdev->soc_host.drv_name = MX2_CAM_DRV_NAME, + pcdev->soc_host.ops = &mx2_soc_camera_host_ops, + pcdev->soc_host.priv = pcdev; + pcdev->soc_host.v4l2_dev.dev = &pdev->dev; + pcdev->soc_host.nr = pdev->id; + err = soc_camera_host_register(&pcdev->soc_host); + if (err) + goto exit_free_emma; + + return 0; + +exit_free_emma: + if (mx27_camera_emma(pcdev)) { + free_irq(pcdev->irq_emma, pcdev); + clk_disable(pcdev->clk_emma); + clk_put(pcdev->clk_emma); + iounmap(pcdev->base_emma); + release_mem_region(res_emma->start, resource_size(res_emma)); + } +exit_free_irq: + free_irq(pcdev->irq_csi, pcdev); +exit_iounmap: + iounmap(base_csi); +exit_release: + release_mem_region(res_csi->start, resource_size(res_csi)); +exit_dma_free: +#ifdef CONFIG_MACH_MX27 + if (cpu_is_mx27()) + imx_dma_free(pcdev->dma); +exit_clk_put: + clk_put(pcdev->clk_csi); +#endif /* CONFIG_MACH_MX27 */ +exit_kfree: + kfree(pcdev); +exit: + return err; +} + +static int __devexit mx2_camera_remove(struct platform_device *pdev) +{ + struct soc_camera_host *soc_host = to_soc_camera_host(&pdev->dev); + struct mx2_camera_dev *pcdev = container_of(soc_host, + struct mx2_camera_dev, soc_host); + struct resource *res; + + clk_put(pcdev->clk_csi); +#ifdef CONFIG_MACH_MX27 + if (cpu_is_mx27()) + imx_dma_free(pcdev->dma); +#endif /* CONFIG_MACH_MX27 */ + free_irq(pcdev->irq_csi, pcdev); + if (mx27_camera_emma(pcdev)) + free_irq(pcdev->irq_emma, pcdev); + + soc_camera_host_unregister(&pcdev->soc_host); + + iounmap(pcdev->base_csi); + + if (mx27_camera_emma(pcdev)) { + clk_disable(pcdev->clk_emma); + clk_put(pcdev->clk_emma); + iounmap(pcdev->base_emma); + res = pcdev->res_emma; + release_mem_region(res->start, resource_size(res)); + } + + res = pcdev->res_csi; + release_mem_region(res->start, resource_size(res)); + + kfree(pcdev); + + dev_info(&pdev->dev, "MX2 Camera driver unloaded\n"); + + return 0; +} + +static struct platform_driver mx2_camera_driver = { + .driver = { + .name = MX2_CAM_DRV_NAME, + }, + .remove = __devexit_p(mx2_camera_remove), +}; + + +static int __init mx2_camera_init(void) +{ + return platform_driver_probe(&mx2_camera_driver, &mx2_camera_probe); +} + +static void __exit mx2_camera_exit(void) +{ + return platform_driver_unregister(&mx2_camera_driver); +} + +module_init(mx2_camera_init); +module_exit(mx2_camera_exit); + +MODULE_DESCRIPTION("i.MX27/i.MX25 SoC Camera Host driver"); +MODULE_AUTHOR("Sascha Hauer <sha@pengutronix.de>"); +MODULE_LICENSE("GPL"); diff --git a/drivers/media/video/omap/omap_vout.c b/drivers/media/video/omap/omap_vout.c index 929073e792c..4ed51b1552e 100644 --- a/drivers/media/video/omap/omap_vout.c +++ b/drivers/media/video/omap/omap_vout.c @@ -2545,19 +2545,11 @@ static int __init omap_vout_probe(struct platform_device *pdev) /* set the update mode */ if (def_display->caps & OMAP_DSS_DISPLAY_CAP_MANUAL_UPDATE) { -#ifdef CONFIG_FB_OMAP2_FORCE_AUTO_UPDATE - if (dssdrv->enable_te) - dssdrv->enable_te(def_display, 1); - if (dssdrv->set_update_mode) - dssdrv->set_update_mode(def_display, - OMAP_DSS_UPDATE_AUTO); -#else /* MANUAL_UPDATE */ if (dssdrv->enable_te) dssdrv->enable_te(def_display, 0); if (dssdrv->set_update_mode) dssdrv->set_update_mode(def_display, OMAP_DSS_UPDATE_MANUAL); -#endif } else { if (dssdrv->set_update_mode) dssdrv->set_update_mode(def_display, diff --git a/drivers/media/video/omap24xxcam.c b/drivers/media/video/omap24xxcam.c index f85b2ed8a2d..926a5aa6f7f 100644 --- a/drivers/media/video/omap24xxcam.c +++ b/drivers/media/video/omap24xxcam.c @@ -426,7 +426,7 @@ static void omap24xxcam_vbq_release(struct videobuf_queue *vbq, dma->direction); dma->direction = DMA_NONE; } else { - videobuf_dma_unmap(vbq, videobuf_to_dma(vb)); + videobuf_dma_unmap(vbq->dev, videobuf_to_dma(vb)); videobuf_dma_free(videobuf_to_dma(vb)); } diff --git a/drivers/media/video/ov511.c b/drivers/media/video/ov511.c deleted file mode 100644 index a10912097b7..00000000000 --- a/drivers/media/video/ov511.c +++ /dev/null @@ -1,5995 +0,0 @@ -/* - * OmniVision OV511 Camera-to-USB Bridge Driver - * - * Copyright (c) 1999-2003 Mark W. McClelland - * Original decompression code Copyright 1998-2000 OmniVision Technologies - * Many improvements by Bret Wallach <bwallac1@san.rr.com> - * Color fixes by by Orion Sky Lawlor <olawlor@acm.org> (2/26/2000) - * Snapshot code by Kevin Moore - * OV7620 fixes by Charl P. Botha <cpbotha@ieee.org> - * Changes by Claudio Matsuoka <claudio@conectiva.com> - * Original SAA7111A code by Dave Perks <dperks@ibm.net> - * URB error messages from pwc driver by Nemosoft - * generic_ioctl() code from videodev.c by Gerd Knorr and Alan Cox - * Memory management (rvmalloc) code from bttv driver, by Gerd Knorr and others - * - * Based on the Linux CPiA driver written by Peter Pregler, - * Scott J. Bertin and Johannes Erdfelt. - * - * Please see the file: Documentation/usb/ov511.txt - * and the website at: http://alpha.dyndns.org/ov511 - * for more info. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY - * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License - * for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software Foundation, - * Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#include <linux/module.h> -#include <linux/init.h> -#include <linux/vmalloc.h> -#include <linux/slab.h> -#include <linux/ctype.h> -#include <linux/pagemap.h> -#include <asm/processor.h> -#include <linux/mm.h> -#include <linux/device.h> - -#if defined (__i386__) - #include <asm/cpufeature.h> -#endif - -#include "ov511.h" - -/* - * Version Information - */ -#define DRIVER_VERSION "v1.64 for Linux 2.5" -#define EMAIL "mark@alpha.dyndns.org" -#define DRIVER_AUTHOR "Mark McClelland <mark@alpha.dyndns.org> & Bret Wallach \ -& Orion Sky Lawlor <olawlor@acm.org> & Kevin Moore & Charl P. Botha \ -<cpbotha@ieee.org> & Claudio Matsuoka <claudio@conectiva.com>" -#define DRIVER_DESC "ov511 USB Camera Driver" - -#define OV511_I2C_RETRIES 3 -#define ENABLE_Y_QUANTABLE 1 -#define ENABLE_UV_QUANTABLE 1 - -#define OV511_MAX_UNIT_VIDEO 16 - -/* Pixel count * bytes per YUV420 pixel (1.5) */ -#define MAX_FRAME_SIZE(w, h) ((w) * (h) * 3 / 2) - -#define MAX_DATA_SIZE(w, h) (MAX_FRAME_SIZE(w, h) + sizeof(struct timeval)) - -/* Max size * bytes per YUV420 pixel (1.5) + one extra isoc frame for safety */ -#define MAX_RAW_DATA_SIZE(w, h) ((w) * (h) * 3 / 2 + 1024) - -#define FATAL_ERROR(rc) ((rc) < 0 && (rc) != -EPERM) - -/********************************************************************** - * Module Parameters - * (See ov511.txt for detailed descriptions of these) - **********************************************************************/ - -/* These variables (and all static globals) default to zero */ -static int autobright = 1; -static int autogain = 1; -static int autoexp = 1; -static int debug; -static int snapshot; -static int cams = 1; -static int compress; -static int testpat; -static int dumppix; -static int led = 1; -static int dump_bridge; -static int dump_sensor; -static int printph; -static int phy = 0x1f; -static int phuv = 0x05; -static int pvy = 0x06; -static int pvuv = 0x06; -static int qhy = 0x14; -static int qhuv = 0x03; -static int qvy = 0x04; -static int qvuv = 0x04; -static int lightfreq; -static int bandingfilter; -static int clockdiv = -1; -static int packetsize = -1; -static int framedrop = -1; -static int fastset; -static int force_palette; -static int backlight; -/* Bitmask marking allocated devices from 0 to OV511_MAX_UNIT_VIDEO */ -static unsigned long ov511_devused; -static int unit_video[OV511_MAX_UNIT_VIDEO]; -static int remove_zeros; -static int mirror; -static int ov518_color; - -module_param(autobright, int, 0); -MODULE_PARM_DESC(autobright, "Sensor automatically changes brightness"); -module_param(autogain, int, 0); -MODULE_PARM_DESC(autogain, "Sensor automatically changes gain"); -module_param(autoexp, int, 0); -MODULE_PARM_DESC(autoexp, "Sensor automatically changes exposure"); -module_param(debug, int, 0); -MODULE_PARM_DESC(debug, - "Debug level: 0=none, 1=inits, 2=warning, 3=config, 4=functions, 5=max"); -module_param(snapshot, int, 0); -MODULE_PARM_DESC(snapshot, "Enable snapshot mode"); -module_param(cams, int, 0); -MODULE_PARM_DESC(cams, "Number of simultaneous cameras"); -module_param(compress, int, 0); -MODULE_PARM_DESC(compress, "Turn on compression"); -module_param(testpat, int, 0); -MODULE_PARM_DESC(testpat, - "Replace image with vertical bar testpattern (only partially working)"); -module_param(dumppix, int, 0); -MODULE_PARM_DESC(dumppix, "Dump raw pixel data"); -module_param(led, int, 0); -MODULE_PARM_DESC(led, - "LED policy (OV511+ or later). 0=off, 1=on (default), 2=auto (on when open)"); -module_param(dump_bridge, int, 0); -MODULE_PARM_DESC(dump_bridge, "Dump the bridge registers"); -module_param(dump_sensor, int, 0); -MODULE_PARM_DESC(dump_sensor, "Dump the sensor registers"); -module_param(printph, int, 0); -MODULE_PARM_DESC(printph, "Print frame start/end headers"); -module_param(phy, int, 0); -MODULE_PARM_DESC(phy, "Prediction range (horiz. Y)"); -module_param(phuv, int, 0); -MODULE_PARM_DESC(phuv, "Prediction range (horiz. UV)"); -module_param(pvy, int, 0); -MODULE_PARM_DESC(pvy, "Prediction range (vert. Y)"); -module_param(pvuv, int, 0); -MODULE_PARM_DESC(pvuv, "Prediction range (vert. UV)"); -module_param(qhy, int, 0); -MODULE_PARM_DESC(qhy, "Quantization threshold (horiz. Y)"); -module_param(qhuv, int, 0); -MODULE_PARM_DESC(qhuv, "Quantization threshold (horiz. UV)"); -module_param(qvy, int, 0); -MODULE_PARM_DESC(qvy, "Quantization threshold (vert. Y)"); -module_param(qvuv, int, 0); -MODULE_PARM_DESC(qvuv, "Quantization threshold (vert. UV)"); -module_param(lightfreq, int, 0); -MODULE_PARM_DESC(lightfreq, - "Light frequency. Set to 50 or 60 Hz, or zero for default settings"); -module_param(bandingfilter, int, 0); -MODULE_PARM_DESC(bandingfilter, - "Enable banding filter (to reduce effects of fluorescent lighting)"); -module_param(clockdiv, int, 0); -MODULE_PARM_DESC(clockdiv, "Force pixel clock divisor to a specific value"); -module_param(packetsize, int, 0); -MODULE_PARM_DESC(packetsize, "Force a specific isoc packet size"); -module_param(framedrop, int, 0); -MODULE_PARM_DESC(framedrop, "Force a specific frame drop register setting"); -module_param(fastset, int, 0); -MODULE_PARM_DESC(fastset, "Allows picture settings to take effect immediately"); -module_param(force_palette, int, 0); -MODULE_PARM_DESC(force_palette, "Force the palette to a specific value"); -module_param(backlight, int, 0); -MODULE_PARM_DESC(backlight, "For objects that are lit from behind"); -static unsigned int num_uv; -module_param_array(unit_video, int, &num_uv, 0); -MODULE_PARM_DESC(unit_video, - "Force use of specific minor number(s). 0 is not allowed."); -module_param(remove_zeros, int, 0); -MODULE_PARM_DESC(remove_zeros, - "Remove zero-padding from uncompressed incoming data"); -module_param(mirror, int, 0); -MODULE_PARM_DESC(mirror, "Reverse image horizontally"); -module_param(ov518_color, int, 0); -MODULE_PARM_DESC(ov518_color, "Enable OV518 color (experimental)"); - -MODULE_AUTHOR(DRIVER_AUTHOR); -MODULE_DESCRIPTION(DRIVER_DESC); -MODULE_LICENSE("GPL"); - -/********************************************************************** - * Miscellaneous Globals - **********************************************************************/ - -static struct usb_driver ov511_driver; - -/* Number of times to retry a failed I2C transaction. Increase this if you - * are getting "Failed to read sensor ID..." */ -static const int i2c_detect_tries = 5; - -static struct usb_device_id device_table [] = { - { USB_DEVICE(VEND_OMNIVISION, PROD_OV511) }, - { USB_DEVICE(VEND_OMNIVISION, PROD_OV511PLUS) }, - { USB_DEVICE(VEND_MATTEL, PROD_ME2CAM) }, - { } /* Terminating entry */ -}; - -MODULE_DEVICE_TABLE (usb, device_table); - -static unsigned char yQuanTable511[] = OV511_YQUANTABLE; -static unsigned char uvQuanTable511[] = OV511_UVQUANTABLE; -static unsigned char yQuanTable518[] = OV518_YQUANTABLE; -static unsigned char uvQuanTable518[] = OV518_UVQUANTABLE; - -/********************************************************************** - * Symbolic Names - **********************************************************************/ - -/* Known OV511-based cameras */ -static struct symbolic_list camlist[] = { - { 0, "Generic Camera (no ID)" }, - { 1, "Mustek WCam 3X" }, - { 3, "D-Link DSB-C300" }, - { 4, "Generic OV511/OV7610" }, - { 5, "Puretek PT-6007" }, - { 6, "Lifeview USB Life TV (NTSC)" }, - { 21, "Creative Labs WebCam 3" }, - { 22, "Lifeview USB Life TV (PAL D/K+B/G)" }, - { 36, "Koala-Cam" }, - { 38, "Lifeview USB Life TV (PAL)" }, - { 41, "Samsung Anycam MPC-M10" }, - { 43, "Mtekvision Zeca MV402" }, - { 46, "Suma eON" }, - { 70, "Lifeview USB Life TV (PAL/SECAM)" }, - { 100, "Lifeview RoboCam" }, - { 102, "AverMedia InterCam Elite" }, - { 112, "MediaForte MV300" }, /* or OV7110 evaluation kit */ - { 134, "Ezonics EZCam II" }, - { 192, "Webeye 2000B" }, - { 253, "Alpha Vision Tech. AlphaCam SE" }, - { -1, NULL } -}; - -/* Video4Linux1 Palettes */ -static struct symbolic_list v4l1_plist[] = { - { VIDEO_PALETTE_GREY, "GREY" }, - { VIDEO_PALETTE_HI240, "HI240" }, - { VIDEO_PALETTE_RGB565, "RGB565" }, - { VIDEO_PALETTE_RGB24, "RGB24" }, - { VIDEO_PALETTE_RGB32, "RGB32" }, - { VIDEO_PALETTE_RGB555, "RGB555" }, - { VIDEO_PALETTE_YUV422, "YUV422" }, - { VIDEO_PALETTE_YUYV, "YUYV" }, - { VIDEO_PALETTE_UYVY, "UYVY" }, - { VIDEO_PALETTE_YUV420, "YUV420" }, - { VIDEO_PALETTE_YUV411, "YUV411" }, - { VIDEO_PALETTE_RAW, "RAW" }, - { VIDEO_PALETTE_YUV422P,"YUV422P" }, - { VIDEO_PALETTE_YUV411P,"YUV411P" }, - { VIDEO_PALETTE_YUV420P,"YUV420P" }, - { VIDEO_PALETTE_YUV410P,"YUV410P" }, - { -1, NULL } -}; - -static struct symbolic_list brglist[] = { - { BRG_OV511, "OV511" }, - { BRG_OV511PLUS, "OV511+" }, - { BRG_OV518, "OV518" }, - { BRG_OV518PLUS, "OV518+" }, - { -1, NULL } -}; - -static struct symbolic_list senlist[] = { - { SEN_OV76BE, "OV76BE" }, - { SEN_OV7610, "OV7610" }, - { SEN_OV7620, "OV7620" }, - { SEN_OV7620AE, "OV7620AE" }, - { SEN_OV6620, "OV6620" }, - { SEN_OV6630, "OV6630" }, - { SEN_OV6630AE, "OV6630AE" }, - { SEN_OV6630AF, "OV6630AF" }, - { SEN_OV8600, "OV8600" }, - { SEN_KS0127, "KS0127" }, - { SEN_KS0127B, "KS0127B" }, - { SEN_SAA7111A, "SAA7111A" }, - { -1, NULL } -}; - -/* URB error codes: */ -static struct symbolic_list urb_errlist[] = { - { -ENOSR, "Buffer error (overrun)" }, - { -EPIPE, "Stalled (device not responding)" }, - { -EOVERFLOW, "Babble (device sends too much data)" }, - { -EPROTO, "Bit-stuff error (bad cable?)" }, - { -EILSEQ, "CRC/Timeout (bad cable?)" }, - { -ETIME, "Device does not respond to token" }, - { -ETIMEDOUT, "Device does not respond to command" }, - { -1, NULL } -}; - -/********************************************************************** - * Memory management - **********************************************************************/ -static void * -rvmalloc(unsigned long size) -{ - void *mem; - unsigned long adr; - - size = PAGE_ALIGN(size); - mem = vmalloc_32(size); - if (!mem) - return NULL; - - memset(mem, 0, size); /* Clear the ram out, no junk to the user */ - adr = (unsigned long) mem; - while (size > 0) { - SetPageReserved(vmalloc_to_page((void *)adr)); - adr += PAGE_SIZE; - size -= PAGE_SIZE; - } - - return mem; -} - -static void -rvfree(void *mem, unsigned long size) -{ - unsigned long adr; - - if (!mem) - return; - - adr = (unsigned long) mem; - while ((long) size > 0) { - ClearPageReserved(vmalloc_to_page((void *)adr)); - adr += PAGE_SIZE; - size -= PAGE_SIZE; - } - vfree(mem); -} - -/********************************************************************** - * - * Register I/O - * - **********************************************************************/ - -/* Write an OV51x register */ -static int -reg_w(struct usb_ov511 *ov, unsigned char reg, unsigned char value) -{ - int rc; - - PDEBUG(5, "0x%02X:0x%02X", reg, value); - - mutex_lock(&ov->cbuf_lock); - ov->cbuf[0] = value; - rc = usb_control_msg(ov->dev, - usb_sndctrlpipe(ov->dev, 0), - (ov->bclass == BCL_OV518)?1:2 /* REG_IO */, - USB_TYPE_VENDOR | USB_RECIP_DEVICE, - 0, (__u16)reg, &ov->cbuf[0], 1, 1000); - mutex_unlock(&ov->cbuf_lock); - - if (rc < 0) - err("reg write: error %d: %s", rc, symbolic(urb_errlist, rc)); - - return rc; -} - -/* Read from an OV51x register */ -/* returns: negative is error, pos or zero is data */ -static int -reg_r(struct usb_ov511 *ov, unsigned char reg) -{ - int rc; - - mutex_lock(&ov->cbuf_lock); - rc = usb_control_msg(ov->dev, - usb_rcvctrlpipe(ov->dev, 0), - (ov->bclass == BCL_OV518)?1:3 /* REG_IO */, - USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE, - 0, (__u16)reg, &ov->cbuf[0], 1, 1000); - - if (rc < 0) { - err("reg read: error %d: %s", rc, symbolic(urb_errlist, rc)); - } else { - rc = ov->cbuf[0]; - PDEBUG(5, "0x%02X:0x%02X", reg, ov->cbuf[0]); - } - - mutex_unlock(&ov->cbuf_lock); - - return rc; -} - -/* - * Writes bits at positions specified by mask to an OV51x reg. Bits that are in - * the same position as 1's in "mask" are cleared and set to "value". Bits - * that are in the same position as 0's in "mask" are preserved, regardless - * of their respective state in "value". - */ -static int -reg_w_mask(struct usb_ov511 *ov, - unsigned char reg, - unsigned char value, - unsigned char mask) -{ - int ret; - unsigned char oldval, newval; - - ret = reg_r(ov, reg); - if (ret < 0) - return ret; - - oldval = (unsigned char) ret; - oldval &= (~mask); /* Clear the masked bits */ - value &= mask; /* Enforce mask on value */ - newval = oldval | value; /* Set the desired bits */ - - return (reg_w(ov, reg, newval)); -} - -/* - * Writes multiple (n) byte value to a single register. Only valid with certain - * registers (0x30 and 0xc4 - 0xce). - */ -static int -ov518_reg_w32(struct usb_ov511 *ov, unsigned char reg, u32 val, int n) -{ - int rc; - - PDEBUG(5, "0x%02X:%7d, n=%d", reg, val, n); - - mutex_lock(&ov->cbuf_lock); - - *((__le32 *)ov->cbuf) = __cpu_to_le32(val); - - rc = usb_control_msg(ov->dev, - usb_sndctrlpipe(ov->dev, 0), - 1 /* REG_IO */, - USB_TYPE_VENDOR | USB_RECIP_DEVICE, - 0, (__u16)reg, ov->cbuf, n, 1000); - mutex_unlock(&ov->cbuf_lock); - - if (rc < 0) - err("reg write multiple: error %d: %s", rc, - symbolic(urb_errlist, rc)); - - return rc; -} - -static int -ov511_upload_quan_tables(struct usb_ov511 *ov) -{ - unsigned char *pYTable = yQuanTable511; - unsigned char *pUVTable = uvQuanTable511; - unsigned char val0, val1; - int i, rc, reg = R511_COMP_LUT_BEGIN; - - PDEBUG(4, "Uploading quantization tables"); - - for (i = 0; i < OV511_QUANTABLESIZE / 2; i++) { - if (ENABLE_Y_QUANTABLE) { - val0 = *pYTable++; - val1 = *pYTable++; - val0 &= 0x0f; - val1 &= 0x0f; - val0 |= val1 << 4; - rc = reg_w(ov, reg, val0); - if (rc < 0) - return rc; - } - - if (ENABLE_UV_QUANTABLE) { - val0 = *pUVTable++; - val1 = *pUVTable++; - val0 &= 0x0f; - val1 &= 0x0f; - val0 |= val1 << 4; - rc = reg_w(ov, reg + OV511_QUANTABLESIZE/2, val0); - if (rc < 0) - return rc; - } - - reg++; - } - - return 0; -} - -/* OV518 quantization tables are 8x4 (instead of 8x8) */ -static int -ov518_upload_quan_tables(struct usb_ov511 *ov) -{ - unsigned char *pYTable = yQuanTable518; - unsigned char *pUVTable = uvQuanTable518; - unsigned char val0, val1; - int i, rc, reg = R511_COMP_LUT_BEGIN; - - PDEBUG(4, "Uploading quantization tables"); - - for (i = 0; i < OV518_QUANTABLESIZE / 2; i++) { - if (ENABLE_Y_QUANTABLE) { - val0 = *pYTable++; - val1 = *pYTable++; - val0 &= 0x0f; - val1 &= 0x0f; - val0 |= val1 << 4; - rc = reg_w(ov, reg, val0); - if (rc < 0) - return rc; - } - - if (ENABLE_UV_QUANTABLE) { - val0 = *pUVTable++; - val1 = *pUVTable++; - val0 &= 0x0f; - val1 &= 0x0f; - val0 |= val1 << 4; - rc = reg_w(ov, reg + OV518_QUANTABLESIZE/2, val0); - if (rc < 0) - return rc; - } - - reg++; - } - - return 0; -} - -static int -ov51x_reset(struct usb_ov511 *ov, unsigned char reset_type) -{ - int rc; - - /* Setting bit 0 not allowed on 518/518Plus */ - if (ov->bclass == BCL_OV518) - reset_type &= 0xfe; - - PDEBUG(4, "Reset: type=0x%02X", reset_type); - - rc = reg_w(ov, R51x_SYS_RESET, reset_type); - rc = reg_w(ov, R51x_SYS_RESET, 0); - - if (rc < 0) - err("reset: command failed"); - - return rc; -} - -/********************************************************************** - * - * Low-level I2C I/O functions - * - **********************************************************************/ - -/* NOTE: Do not call this function directly! - * The OV518 I2C I/O procedure is different, hence, this function. - * This is normally only called from i2c_w(). Note that this function - * always succeeds regardless of whether the sensor is present and working. - */ -static int -ov518_i2c_write_internal(struct usb_ov511 *ov, - unsigned char reg, - unsigned char value) -{ - int rc; - - PDEBUG(5, "0x%02X:0x%02X", reg, value); - - /* Select camera register */ - rc = reg_w(ov, R51x_I2C_SADDR_3, reg); - if (rc < 0) - return rc; - - /* Write "value" to I2C data port of OV511 */ - rc = reg_w(ov, R51x_I2C_DATA, value); - if (rc < 0) - return rc; - - /* Initiate 3-byte write cycle */ - rc = reg_w(ov, R518_I2C_CTL, 0x01); - if (rc < 0) - return rc; - - return 0; -} - -/* NOTE: Do not call this function directly! */ -static int -ov511_i2c_write_internal(struct usb_ov511 *ov, - unsigned char reg, - unsigned char value) -{ - int rc, retries; - - PDEBUG(5, "0x%02X:0x%02X", reg, value); - - /* Three byte write cycle */ - for (retries = OV511_I2C_RETRIES; ; ) { - /* Select camera register */ - rc = reg_w(ov, R51x_I2C_SADDR_3, reg); - if (rc < 0) - break; - - /* Write "value" to I2C data port of OV511 */ - rc = reg_w(ov, R51x_I2C_DATA, value); - if (rc < 0) - break; - - /* Initiate 3-byte write cycle */ - rc = reg_w(ov, R511_I2C_CTL, 0x01); - if (rc < 0) - break; - - /* Retry until idle */ - do { - rc = reg_r(ov, R511_I2C_CTL); - } while (rc > 0 && ((rc&1) == 0)); - if (rc < 0) - break; - - /* Ack? */ - if ((rc&2) == 0) { - rc = 0; - break; - } -#if 0 - /* I2C abort */ - reg_w(ov, R511_I2C_CTL, 0x10); -#endif - if (--retries < 0) { - err("i2c write retries exhausted"); - rc = -1; - break; - } - } - - return rc; -} - -/* NOTE: Do not call this function directly! - * The OV518 I2C I/O procedure is different, hence, this function. - * This is normally only called from i2c_r(). Note that this function - * always succeeds regardless of whether the sensor is present and working. - */ -static int -ov518_i2c_read_internal(struct usb_ov511 *ov, unsigned char reg) -{ - int rc, value; - - /* Select camera register */ - rc = reg_w(ov, R51x_I2C_SADDR_2, reg); - if (rc < 0) - return rc; - - /* Initiate 2-byte write cycle */ - rc = reg_w(ov, R518_I2C_CTL, 0x03); - if (rc < 0) - return rc; - - /* Initiate 2-byte read cycle */ - rc = reg_w(ov, R518_I2C_CTL, 0x05); - if (rc < 0) - return rc; - - value = reg_r(ov, R51x_I2C_DATA); - - PDEBUG(5, "0x%02X:0x%02X", reg, value); - - return value; -} - -/* NOTE: Do not call this function directly! - * returns: negative is error, pos or zero is data */ -static int -ov511_i2c_read_internal(struct usb_ov511 *ov, unsigned char reg) -{ - int rc, value, retries; - - /* Two byte write cycle */ - for (retries = OV511_I2C_RETRIES; ; ) { - /* Select camera register */ - rc = reg_w(ov, R51x_I2C_SADDR_2, reg); - if (rc < 0) - return rc; - - /* Initiate 2-byte write cycle */ - rc = reg_w(ov, R511_I2C_CTL, 0x03); - if (rc < 0) - return rc; - - /* Retry until idle */ - do { - rc = reg_r(ov, R511_I2C_CTL); - } while (rc > 0 && ((rc & 1) == 0)); - if (rc < 0) - return rc; - - if ((rc&2) == 0) /* Ack? */ - break; - - /* I2C abort */ - reg_w(ov, R511_I2C_CTL, 0x10); - - if (--retries < 0) { - err("i2c write retries exhausted"); - return -1; - } - } - - /* Two byte read cycle */ - for (retries = OV511_I2C_RETRIES; ; ) { - /* Initiate 2-byte read cycle */ - rc = reg_w(ov, R511_I2C_CTL, 0x05); - if (rc < 0) - return rc; - - /* Retry until idle */ - do { - rc = reg_r(ov, R511_I2C_CTL); - } while (rc > 0 && ((rc&1) == 0)); - if (rc < 0) - return rc; - - if ((rc&2) == 0) /* Ack? */ - break; - - /* I2C abort */ - rc = reg_w(ov, R511_I2C_CTL, 0x10); - if (rc < 0) - return rc; - - if (--retries < 0) { - err("i2c read retries exhausted"); - return -1; - } - } - - value = reg_r(ov, R51x_I2C_DATA); - - PDEBUG(5, "0x%02X:0x%02X", reg, value); - - /* This is needed to make i2c_w() work */ - rc = reg_w(ov, R511_I2C_CTL, 0x05); - if (rc < 0) - return rc; - - return value; -} - -/* returns: negative is error, pos or zero is data */ -static int -i2c_r(struct usb_ov511 *ov, unsigned char reg) -{ - int rc; - - mutex_lock(&ov->i2c_lock); - - if (ov->bclass == BCL_OV518) - rc = ov518_i2c_read_internal(ov, reg); - else - rc = ov511_i2c_read_internal(ov, reg); - - mutex_unlock(&ov->i2c_lock); - - return rc; -} - -static int -i2c_w(struct usb_ov511 *ov, unsigned char reg, unsigned char value) -{ - int rc; - - mutex_lock(&ov->i2c_lock); - - if (ov->bclass == BCL_OV518) - rc = ov518_i2c_write_internal(ov, reg, value); - else - rc = ov511_i2c_write_internal(ov, reg, value); - - mutex_unlock(&ov->i2c_lock); - - return rc; -} - -/* Do not call this function directly! */ -static int -ov51x_i2c_write_mask_internal(struct usb_ov511 *ov, - unsigned char reg, - unsigned char value, - unsigned char mask) -{ - int rc; - unsigned char oldval, newval; - - if (mask == 0xff) { - newval = value; - } else { - if (ov->bclass == BCL_OV518) - rc = ov518_i2c_read_internal(ov, reg); - else - rc = ov511_i2c_read_internal(ov, reg); - if (rc < 0) - return rc; - - oldval = (unsigned char) rc; - oldval &= (~mask); /* Clear the masked bits */ - value &= mask; /* Enforce mask on value */ - newval = oldval | value; /* Set the desired bits */ - } - - if (ov->bclass == BCL_OV518) - return (ov518_i2c_write_internal(ov, reg, newval)); - else - return (ov511_i2c_write_internal(ov, reg, newval)); -} - -/* Writes bits at positions specified by mask to an I2C reg. Bits that are in - * the same position as 1's in "mask" are cleared and set to "value". Bits - * that are in the same position as 0's in "mask" are preserved, regardless - * of their respective state in "value". - */ -static int -i2c_w_mask(struct usb_ov511 *ov, - unsigned char reg, - unsigned char value, - unsigned char mask) -{ - int rc; - - mutex_lock(&ov->i2c_lock); - rc = ov51x_i2c_write_mask_internal(ov, reg, value, mask); - mutex_unlock(&ov->i2c_lock); - - return rc; -} - -/* Set the read and write slave IDs. The "slave" argument is the write slave, - * and the read slave will be set to (slave + 1). ov->i2c_lock should be held - * when calling this. This should not be called from outside the i2c I/O - * functions. - */ -static int -i2c_set_slave_internal(struct usb_ov511 *ov, unsigned char slave) -{ - int rc; - - rc = reg_w(ov, R51x_I2C_W_SID, slave); - if (rc < 0) - return rc; - - rc = reg_w(ov, R51x_I2C_R_SID, slave + 1); - if (rc < 0) - return rc; - - return 0; -} - -/* Write to a specific I2C slave ID and register, using the specified mask */ -static int -i2c_w_slave(struct usb_ov511 *ov, - unsigned char slave, - unsigned char reg, - unsigned char value, - unsigned char mask) -{ - int rc = 0; - - mutex_lock(&ov->i2c_lock); - - /* Set new slave IDs */ - rc = i2c_set_slave_internal(ov, slave); - if (rc < 0) - goto out; - - rc = ov51x_i2c_write_mask_internal(ov, reg, value, mask); - -out: - /* Restore primary IDs */ - if (i2c_set_slave_internal(ov, ov->primary_i2c_slave) < 0) - err("Couldn't restore primary I2C slave"); - - mutex_unlock(&ov->i2c_lock); - return rc; -} - -/* Read from a specific I2C slave ID and register */ -static int -i2c_r_slave(struct usb_ov511 *ov, - unsigned char slave, - unsigned char reg) -{ - int rc; - - mutex_lock(&ov->i2c_lock); - - /* Set new slave IDs */ - rc = i2c_set_slave_internal(ov, slave); - if (rc < 0) - goto out; - - if (ov->bclass == BCL_OV518) - rc = ov518_i2c_read_internal(ov, reg); - else - rc = ov511_i2c_read_internal(ov, reg); - -out: - /* Restore primary IDs */ - if (i2c_set_slave_internal(ov, ov->primary_i2c_slave) < 0) - err("Couldn't restore primary I2C slave"); - - mutex_unlock(&ov->i2c_lock); - return rc; -} - -/* Sets I2C read and write slave IDs. Returns <0 for error */ -static int -ov51x_set_slave_ids(struct usb_ov511 *ov, unsigned char sid) -{ - int rc; - - mutex_lock(&ov->i2c_lock); - - rc = i2c_set_slave_internal(ov, sid); - if (rc < 0) - goto out; - - // FIXME: Is this actually necessary? - rc = ov51x_reset(ov, OV511_RESET_NOREGS); -out: - mutex_unlock(&ov->i2c_lock); - return rc; -} - -static int -write_regvals(struct usb_ov511 *ov, struct ov511_regvals * pRegvals) -{ - int rc; - - while (pRegvals->bus != OV511_DONE_BUS) { - if (pRegvals->bus == OV511_REG_BUS) { - if ((rc = reg_w(ov, pRegvals->reg, pRegvals->val)) < 0) - return rc; - } else if (pRegvals->bus == OV511_I2C_BUS) { - if ((rc = i2c_w(ov, pRegvals->reg, pRegvals->val)) < 0) - return rc; - } else { - err("Bad regval array"); - return -1; - } - pRegvals++; - } - return 0; -} - -#ifdef OV511_DEBUG -static void -dump_i2c_range(struct usb_ov511 *ov, int reg1, int regn) -{ - int i, rc; - - for (i = reg1; i <= regn; i++) { - rc = i2c_r(ov, i); - dev_info(&ov->dev->dev, "Sensor[0x%02X] = 0x%02X\n", i, rc); - } -} - -static void -dump_i2c_regs(struct usb_ov511 *ov) -{ - dev_info(&ov->dev->dev, "I2C REGS\n"); - dump_i2c_range(ov, 0x00, 0x7C); -} - -static void -dump_reg_range(struct usb_ov511 *ov, int reg1, int regn) -{ - int i, rc; - - for (i = reg1; i <= regn; i++) { - rc = reg_r(ov, i); - dev_info(&ov->dev->dev, "OV511[0x%02X] = 0x%02X\n", i, rc); - } -} - -static void -ov511_dump_regs(struct usb_ov511 *ov) -{ - dev_info(&ov->dev->dev, "CAMERA INTERFACE REGS\n"); - dump_reg_range(ov, 0x10, 0x1f); - dev_info(&ov->dev->dev, "DRAM INTERFACE REGS\n"); - dump_reg_range(ov, 0x20, 0x23); - dev_info(&ov->dev->dev, "ISO FIFO REGS\n"); - dump_reg_range(ov, 0x30, 0x31); - dev_info(&ov->dev->dev, "PIO REGS\n"); - dump_reg_range(ov, 0x38, 0x39); - dump_reg_range(ov, 0x3e, 0x3e); - dev_info(&ov->dev->dev, "I2C REGS\n"); - dump_reg_range(ov, 0x40, 0x49); - dev_info(&ov->dev->dev, "SYSTEM CONTROL REGS\n"); - dump_reg_range(ov, 0x50, 0x55); - dump_reg_range(ov, 0x5e, 0x5f); - dev_info(&ov->dev->dev, "OmniCE REGS\n"); - dump_reg_range(ov, 0x70, 0x79); - /* NOTE: Quantization tables are not readable. You will get the value - * in reg. 0x79 for every table register */ - dump_reg_range(ov, 0x80, 0x9f); - dump_reg_range(ov, 0xa0, 0xbf); - -} - -static void -ov518_dump_regs(struct usb_ov511 *ov) -{ - dev_info(&ov->dev->dev, "VIDEO MODE REGS\n"); - dump_reg_range(ov, 0x20, 0x2f); - dev_info(&ov->dev->dev, "DATA PUMP AND SNAPSHOT REGS\n"); - dump_reg_range(ov, 0x30, 0x3f); - dev_info(&ov->dev->dev, "I2C REGS\n"); - dump_reg_range(ov, 0x40, 0x4f); - dev_info(&ov->dev->dev, "SYSTEM CONTROL AND VENDOR REGS\n"); - dump_reg_range(ov, 0x50, 0x5f); - dev_info(&ov->dev->dev, "60 - 6F\n"); - dump_reg_range(ov, 0x60, 0x6f); - dev_info(&ov->dev->dev, "70 - 7F\n"); - dump_reg_range(ov, 0x70, 0x7f); - dev_info(&ov->dev->dev, "Y QUANTIZATION TABLE\n"); - dump_reg_range(ov, 0x80, 0x8f); - dev_info(&ov->dev->dev, "UV QUANTIZATION TABLE\n"); - dump_reg_range(ov, 0x90, 0x9f); - dev_info(&ov->dev->dev, "A0 - BF\n"); - dump_reg_range(ov, 0xa0, 0xbf); - dev_info(&ov->dev->dev, "CBR\n"); - dump_reg_range(ov, 0xc0, 0xcf); -} -#endif - -/*****************************************************************************/ - -/* Temporarily stops OV511 from functioning. Must do this before changing - * registers while the camera is streaming */ -static inline int -ov51x_stop(struct usb_ov511 *ov) -{ - PDEBUG(4, "stopping"); - ov->stopped = 1; - if (ov->bclass == BCL_OV518) - return (reg_w_mask(ov, R51x_SYS_RESET, 0x3a, 0x3a)); - else - return (reg_w(ov, R51x_SYS_RESET, 0x3d)); -} - -/* Restarts OV511 after ov511_stop() is called. Has no effect if it is not - * actually stopped (for performance). */ -static inline int -ov51x_restart(struct usb_ov511 *ov) -{ - if (ov->stopped) { - PDEBUG(4, "restarting"); - ov->stopped = 0; - - /* Reinitialize the stream */ - if (ov->bclass == BCL_OV518) - reg_w(ov, 0x2f, 0x80); - - return (reg_w(ov, R51x_SYS_RESET, 0x00)); - } - - return 0; -} - -/* Sleeps until no frames are active. Returns !0 if got signal */ -static int -ov51x_wait_frames_inactive(struct usb_ov511 *ov) -{ - return wait_event_interruptible(ov->wq, ov->curframe < 0); -} - -/* Resets the hardware snapshot button */ -static void -ov51x_clear_snapshot(struct usb_ov511 *ov) -{ - if (ov->bclass == BCL_OV511) { - reg_w(ov, R51x_SYS_SNAP, 0x00); - reg_w(ov, R51x_SYS_SNAP, 0x02); - reg_w(ov, R51x_SYS_SNAP, 0x00); - } else if (ov->bclass == BCL_OV518) { - dev_warn(&ov->dev->dev, - "snapshot reset not supported yet on OV518(+)\n"); - } else { - dev_err(&ov->dev->dev, "clear snap: invalid bridge type\n"); - } -} - -#if 0 -/* Checks the status of the snapshot button. Returns 1 if it was pressed since - * it was last cleared, and zero in all other cases (including errors) */ -static int -ov51x_check_snapshot(struct usb_ov511 *ov) -{ - int ret, status = 0; - - if (ov->bclass == BCL_OV511) { - ret = reg_r(ov, R51x_SYS_SNAP); - if (ret < 0) { - dev_err(&ov->dev->dev, - "Error checking snspshot status (%d)\n", ret); - } else if (ret & 0x08) { - status = 1; - } - } else if (ov->bclass == BCL_OV518) { - dev_warn(&ov->dev->dev, - "snapshot check not supported yet on OV518(+)\n"); - } else { - dev_err(&ov->dev->dev, "clear snap: invalid bridge type\n"); - } - - return status; -} -#endif - -/* This does an initial reset of an OmniVision sensor and ensures that I2C - * is synchronized. Returns <0 for failure. - */ -static int -init_ov_sensor(struct usb_ov511 *ov) -{ - int i, success; - - /* Reset the sensor */ - if (i2c_w(ov, 0x12, 0x80) < 0) - return -EIO; - - /* Wait for it to initialize */ - msleep(150); - - for (i = 0, success = 0; i < i2c_detect_tries && !success; i++) { - if ((i2c_r(ov, OV7610_REG_ID_HIGH) == 0x7F) && - (i2c_r(ov, OV7610_REG_ID_LOW) == 0xA2)) { - success = 1; - continue; - } - - /* Reset the sensor */ - if (i2c_w(ov, 0x12, 0x80) < 0) - return -EIO; - /* Wait for it to initialize */ - msleep(150); - /* Dummy read to sync I2C */ - if (i2c_r(ov, 0x00) < 0) - return -EIO; - } - - if (!success) - return -EIO; - - PDEBUG(1, "I2C synced in %d attempt(s)", i); - - return 0; -} - -static int -ov511_set_packet_size(struct usb_ov511 *ov, int size) -{ - int alt, mult; - - if (ov51x_stop(ov) < 0) - return -EIO; - - mult = size >> 5; - - if (ov->bridge == BRG_OV511) { - if (size == 0) - alt = OV511_ALT_SIZE_0; - else if (size == 257) - alt = OV511_ALT_SIZE_257; - else if (size == 513) - alt = OV511_ALT_SIZE_513; - else if (size == 769) - alt = OV511_ALT_SIZE_769; - else if (size == 993) - alt = OV511_ALT_SIZE_993; - else { - err("Set packet size: invalid size (%d)", size); - return -EINVAL; - } - } else if (ov->bridge == BRG_OV511PLUS) { - if (size == 0) - alt = OV511PLUS_ALT_SIZE_0; - else if (size == 33) - alt = OV511PLUS_ALT_SIZE_33; - else if (size == 129) - alt = OV511PLUS_ALT_SIZE_129; - else if (size == 257) - alt = OV511PLUS_ALT_SIZE_257; - else if (size == 385) - alt = OV511PLUS_ALT_SIZE_385; - else if (size == 513) - alt = OV511PLUS_ALT_SIZE_513; - else if (size == 769) - alt = OV511PLUS_ALT_SIZE_769; - else if (size == 961) - alt = OV511PLUS_ALT_SIZE_961; - else { - err("Set packet size: invalid size (%d)", size); - return -EINVAL; - } - } else { - err("Set packet size: Invalid bridge type"); - return -EINVAL; - } - - PDEBUG(3, "%d, mult=%d, alt=%d", size, mult, alt); - - if (reg_w(ov, R51x_FIFO_PSIZE, mult) < 0) - return -EIO; - - if (usb_set_interface(ov->dev, ov->iface, alt) < 0) { - err("Set packet size: set interface error"); - return -EBUSY; - } - - if (ov51x_reset(ov, OV511_RESET_NOREGS) < 0) - return -EIO; - - ov->packet_size = size; - - if (ov51x_restart(ov) < 0) - return -EIO; - - return 0; -} - -/* Note: Unlike the OV511/OV511+, the size argument does NOT include the - * optional packet number byte. The actual size *is* stored in ov->packet_size, - * though. */ -static int -ov518_set_packet_size(struct usb_ov511 *ov, int size) -{ - int alt; - - if (ov51x_stop(ov) < 0) - return -EIO; - - if (ov->bclass == BCL_OV518) { - if (size == 0) - alt = OV518_ALT_SIZE_0; - else if (size == 128) - alt = OV518_ALT_SIZE_128; - else if (size == 256) - alt = OV518_ALT_SIZE_256; - else if (size == 384) - alt = OV518_ALT_SIZE_384; - else if (size == 512) - alt = OV518_ALT_SIZE_512; - else if (size == 640) - alt = OV518_ALT_SIZE_640; - else if (size == 768) - alt = OV518_ALT_SIZE_768; - else if (size == 896) - alt = OV518_ALT_SIZE_896; - else { - err("Set packet size: invalid size (%d)", size); - return -EINVAL; - } - } else { - err("Set packet size: Invalid bridge type"); - return -EINVAL; - } - - PDEBUG(3, "%d, alt=%d", size, alt); - - ov->packet_size = size; - if (size > 0) { - /* Program ISO FIFO size reg (packet number isn't included) */ - ov518_reg_w32(ov, 0x30, size, 2); - - if (ov->packet_numbering) - ++ov->packet_size; - } - - if (usb_set_interface(ov->dev, ov->iface, alt) < 0) { - err("Set packet size: set interface error"); - return -EBUSY; - } - - /* Initialize the stream */ - if (reg_w(ov, 0x2f, 0x80) < 0) - return -EIO; - - if (ov51x_restart(ov) < 0) - return -EIO; - - if (ov51x_reset(ov, OV511_RESET_NOREGS) < 0) - return -EIO; - - return 0; -} - -/* Upload compression params and quantization tables. Returns 0 for success. */ -static int -ov511_init_compression(struct usb_ov511 *ov) -{ - int rc = 0; - - if (!ov->compress_inited) { - reg_w(ov, 0x70, phy); - reg_w(ov, 0x71, phuv); - reg_w(ov, 0x72, pvy); - reg_w(ov, 0x73, pvuv); - reg_w(ov, 0x74, qhy); - reg_w(ov, 0x75, qhuv); - reg_w(ov, 0x76, qvy); - reg_w(ov, 0x77, qvuv); - - if (ov511_upload_quan_tables(ov) < 0) { - err("Error uploading quantization tables"); - rc = -EIO; - goto out; - } - } - - ov->compress_inited = 1; -out: - return rc; -} - -/* Upload compression params and quantization tables. Returns 0 for success. */ -static int -ov518_init_compression(struct usb_ov511 *ov) -{ - int rc = 0; - - if (!ov->compress_inited) { - if (ov518_upload_quan_tables(ov) < 0) { - err("Error uploading quantization tables"); - rc = -EIO; - goto out; - } - } - - ov->compress_inited = 1; -out: - return rc; -} - -/* -------------------------------------------------------------------------- */ - -/* Sets sensor's contrast setting to "val" */ -static int -sensor_set_contrast(struct usb_ov511 *ov, unsigned short val) -{ - int rc; - - PDEBUG(3, "%d", val); - - if (ov->stop_during_set) - if (ov51x_stop(ov) < 0) - return -EIO; - - switch (ov->sensor) { - case SEN_OV7610: - case SEN_OV6620: - { - rc = i2c_w(ov, OV7610_REG_CNT, val >> 8); - if (rc < 0) - goto out; - break; - } - case SEN_OV6630: - { - rc = i2c_w_mask(ov, OV7610_REG_CNT, val >> 12, 0x0f); - if (rc < 0) - goto out; - break; - } - case SEN_OV7620: - { - unsigned char ctab[] = { - 0x01, 0x05, 0x09, 0x11, 0x15, 0x35, 0x37, 0x57, - 0x5b, 0xa5, 0xa7, 0xc7, 0xc9, 0xcf, 0xef, 0xff - }; - - /* Use Y gamma control instead. Bit 0 enables it. */ - rc = i2c_w(ov, 0x64, ctab[val>>12]); - if (rc < 0) - goto out; - break; - } - case SEN_SAA7111A: - { - rc = i2c_w(ov, 0x0b, val >> 9); - if (rc < 0) - goto out; - break; - } - default: - { - PDEBUG(3, "Unsupported with this sensor"); - rc = -EPERM; - goto out; - } - } - - rc = 0; /* Success */ - ov->contrast = val; -out: - if (ov51x_restart(ov) < 0) - return -EIO; - - return rc; -} - -/* Gets sensor's contrast setting */ -static int -sensor_get_contrast(struct usb_ov511 *ov, unsigned short *val) -{ - int rc; - - switch (ov->sensor) { - case SEN_OV7610: - case SEN_OV6620: - rc = i2c_r(ov, OV7610_REG_CNT); - if (rc < 0) - return rc; - else - *val = rc << 8; - break; - case SEN_OV6630: - rc = i2c_r(ov, OV7610_REG_CNT); - if (rc < 0) - return rc; - else - *val = rc << 12; - break; - case SEN_OV7620: - /* Use Y gamma reg instead. Bit 0 is the enable bit. */ - rc = i2c_r(ov, 0x64); - if (rc < 0) - return rc; - else - *val = (rc & 0xfe) << 8; - break; - case SEN_SAA7111A: - *val = ov->contrast; - break; - default: - PDEBUG(3, "Unsupported with this sensor"); - return -EPERM; - } - - PDEBUG(3, "%d", *val); - ov->contrast = *val; - - return 0; -} - -/* -------------------------------------------------------------------------- */ - -/* Sets sensor's brightness setting to "val" */ -static int -sensor_set_brightness(struct usb_ov511 *ov, unsigned short val) -{ - int rc; - - PDEBUG(4, "%d", val); - - if (ov->stop_during_set) - if (ov51x_stop(ov) < 0) - return -EIO; - - switch (ov->sensor) { - case SEN_OV7610: - case SEN_OV76BE: - case SEN_OV6620: - case SEN_OV6630: - rc = i2c_w(ov, OV7610_REG_BRT, val >> 8); - if (rc < 0) - goto out; - break; - case SEN_OV7620: - /* 7620 doesn't like manual changes when in auto mode */ - if (!ov->auto_brt) { - rc = i2c_w(ov, OV7610_REG_BRT, val >> 8); - if (rc < 0) - goto out; - } - break; - case SEN_SAA7111A: - rc = i2c_w(ov, 0x0a, val >> 8); - if (rc < 0) - goto out; - break; - default: - PDEBUG(3, "Unsupported with this sensor"); - rc = -EPERM; - goto out; - } - - rc = 0; /* Success */ - ov->brightness = val; -out: - if (ov51x_restart(ov) < 0) - return -EIO; - - return rc; -} - -/* Gets sensor's brightness setting */ -static int -sensor_get_brightness(struct usb_ov511 *ov, unsigned short *val) -{ - int rc; - - switch (ov->sensor) { - case SEN_OV7610: - case SEN_OV76BE: - case SEN_OV7620: - case SEN_OV6620: - case SEN_OV6630: - rc = i2c_r(ov, OV7610_REG_BRT); - if (rc < 0) - return rc; - else - *val = rc << 8; - break; - case SEN_SAA7111A: - *val = ov->brightness; - break; - default: - PDEBUG(3, "Unsupported with this sensor"); - return -EPERM; - } - - PDEBUG(3, "%d", *val); - ov->brightness = *val; - - return 0; -} - -/* -------------------------------------------------------------------------- */ - -/* Sets sensor's saturation (color intensity) setting to "val" */ -static int -sensor_set_saturation(struct usb_ov511 *ov, unsigned short val) -{ - int rc; - - PDEBUG(3, "%d", val); - - if (ov->stop_during_set) - if (ov51x_stop(ov) < 0) - return -EIO; - - switch (ov->sensor) { - case SEN_OV7610: - case SEN_OV76BE: - case SEN_OV6620: - case SEN_OV6630: - rc = i2c_w(ov, OV7610_REG_SAT, val >> 8); - if (rc < 0) - goto out; - break; - case SEN_OV7620: -// /* Use UV gamma control instead. Bits 0 & 7 are reserved. */ -// rc = ov_i2c_write(ov->dev, 0x62, (val >> 9) & 0x7e); -// if (rc < 0) -// goto out; - rc = i2c_w(ov, OV7610_REG_SAT, val >> 8); - if (rc < 0) - goto out; - break; - case SEN_SAA7111A: - rc = i2c_w(ov, 0x0c, val >> 9); - if (rc < 0) - goto out; - break; - default: - PDEBUG(3, "Unsupported with this sensor"); - rc = -EPERM; - goto out; - } - - rc = 0; /* Success */ - ov->colour = val; -out: - if (ov51x_restart(ov) < 0) - return -EIO; - - return rc; -} - -/* Gets sensor's saturation (color intensity) setting */ -static int -sensor_get_saturation(struct usb_ov511 *ov, unsigned short *val) -{ - int rc; - - switch (ov->sensor) { - case SEN_OV7610: - case SEN_OV76BE: - case SEN_OV6620: - case SEN_OV6630: - rc = i2c_r(ov, OV7610_REG_SAT); - if (rc < 0) - return rc; - else - *val = rc << 8; - break; - case SEN_OV7620: -// /* Use UV gamma reg instead. Bits 0 & 7 are reserved. */ -// rc = i2c_r(ov, 0x62); -// if (rc < 0) -// return rc; -// else -// *val = (rc & 0x7e) << 9; - rc = i2c_r(ov, OV7610_REG_SAT); - if (rc < 0) - return rc; - else - *val = rc << 8; - break; - case SEN_SAA7111A: - *val = ov->colour; - break; - default: - PDEBUG(3, "Unsupported with this sensor"); - return -EPERM; - } - - PDEBUG(3, "%d", *val); - ov->colour = *val; - - return 0; -} - -/* -------------------------------------------------------------------------- */ - -/* Sets sensor's hue (red/blue balance) setting to "val" */ -static int -sensor_set_hue(struct usb_ov511 *ov, unsigned short val) -{ - int rc; - - PDEBUG(3, "%d", val); - - if (ov->stop_during_set) - if (ov51x_stop(ov) < 0) - return -EIO; - - switch (ov->sensor) { - case SEN_OV7610: - case SEN_OV6620: - case SEN_OV6630: - rc = i2c_w(ov, OV7610_REG_RED, 0xFF - (val >> 8)); - if (rc < 0) - goto out; - - rc = i2c_w(ov, OV7610_REG_BLUE, val >> 8); - if (rc < 0) - goto out; - break; - case SEN_OV7620: -// Hue control is causing problems. I will enable it once it's fixed. -#if 0 - rc = i2c_w(ov, 0x7a, (unsigned char)(val >> 8) + 0xb); - if (rc < 0) - goto out; - - rc = i2c_w(ov, 0x79, (unsigned char)(val >> 8) + 0xb); - if (rc < 0) - goto out; -#endif - break; - case SEN_SAA7111A: - rc = i2c_w(ov, 0x0d, (val + 32768) >> 8); - if (rc < 0) - goto out; - break; - default: - PDEBUG(3, "Unsupported with this sensor"); - rc = -EPERM; - goto out; - } - - rc = 0; /* Success */ - ov->hue = val; -out: - if (ov51x_restart(ov) < 0) - return -EIO; - - return rc; -} - -/* Gets sensor's hue (red/blue balance) setting */ -static int -sensor_get_hue(struct usb_ov511 *ov, unsigned short *val) -{ - int rc; - - switch (ov->sensor) { - case SEN_OV7610: - case SEN_OV6620: - case SEN_OV6630: - rc = i2c_r(ov, OV7610_REG_BLUE); - if (rc < 0) - return rc; - else - *val = rc << 8; - break; - case SEN_OV7620: - rc = i2c_r(ov, 0x7a); - if (rc < 0) - return rc; - else - *val = rc << 8; - break; - case SEN_SAA7111A: - *val = ov->hue; - break; - default: - PDEBUG(3, "Unsupported with this sensor"); - return -EPERM; - } - - PDEBUG(3, "%d", *val); - ov->hue = *val; - - return 0; -} - -/* -------------------------------------------------------------------------- */ - -static int -sensor_set_picture(struct usb_ov511 *ov, struct video_picture *p) -{ - int rc; - - PDEBUG(4, "sensor_set_picture"); - - ov->whiteness = p->whiteness; - - /* Don't return error if a setting is unsupported, or rest of settings - * will not be performed */ - - rc = sensor_set_contrast(ov, p->contrast); - if (FATAL_ERROR(rc)) - return rc; - - rc = sensor_set_brightness(ov, p->brightness); - if (FATAL_ERROR(rc)) - return rc; - - rc = sensor_set_saturation(ov, p->colour); - if (FATAL_ERROR(rc)) - return rc; - - rc = sensor_set_hue(ov, p->hue); - if (FATAL_ERROR(rc)) - return rc; - - return 0; -} - -static int -sensor_get_picture(struct usb_ov511 *ov, struct video_picture *p) -{ - int rc; - - PDEBUG(4, "sensor_get_picture"); - - /* Don't return error if a setting is unsupported, or rest of settings - * will not be performed */ - - rc = sensor_get_contrast(ov, &(p->contrast)); - if (FATAL_ERROR(rc)) - return rc; - - rc = sensor_get_brightness(ov, &(p->brightness)); - if (FATAL_ERROR(rc)) - return rc; - - rc = sensor_get_saturation(ov, &(p->colour)); - if (FATAL_ERROR(rc)) - return rc; - - rc = sensor_get_hue(ov, &(p->hue)); - if (FATAL_ERROR(rc)) - return rc; - - p->whiteness = 105 << 8; - - return 0; -} - -#if 0 -// FIXME: Exposure range is only 0x00-0x7f in interlace mode -/* Sets current exposure for sensor. This only has an effect if auto-exposure - * is off */ -static inline int -sensor_set_exposure(struct usb_ov511 *ov, unsigned char val) -{ - int rc; - - PDEBUG(3, "%d", val); - - if (ov->stop_during_set) - if (ov51x_stop(ov) < 0) - return -EIO; - - switch (ov->sensor) { - case SEN_OV6620: - case SEN_OV6630: - case SEN_OV7610: - case SEN_OV7620: - case SEN_OV76BE: - case SEN_OV8600: - rc = i2c_w(ov, 0x10, val); - if (rc < 0) - goto out; - - break; - case SEN_KS0127: - case SEN_KS0127B: - case SEN_SAA7111A: - PDEBUG(3, "Unsupported with this sensor"); - return -EPERM; - default: - err("Sensor not supported for set_exposure"); - return -EINVAL; - } - - rc = 0; /* Success */ - ov->exposure = val; -out: - if (ov51x_restart(ov) < 0) - return -EIO; - - return rc; -} -#endif - -/* Gets current exposure level from sensor, regardless of whether it is under - * manual control. */ -static int -sensor_get_exposure(struct usb_ov511 *ov, unsigned char *val) -{ - int rc; - - switch (ov->sensor) { - case SEN_OV7610: - case SEN_OV6620: - case SEN_OV6630: - case SEN_OV7620: - case SEN_OV76BE: - case SEN_OV8600: - rc = i2c_r(ov, 0x10); - if (rc < 0) - return rc; - else - *val = rc; - break; - case SEN_KS0127: - case SEN_KS0127B: - case SEN_SAA7111A: - val = NULL; - PDEBUG(3, "Unsupported with this sensor"); - return -EPERM; - default: - err("Sensor not supported for get_exposure"); - return -EINVAL; - } - - PDEBUG(3, "%d", *val); - ov->exposure = *val; - - return 0; -} - -/* Turns on or off the LED. Only has an effect with OV511+/OV518(+) */ -static void -ov51x_led_control(struct usb_ov511 *ov, int enable) -{ - PDEBUG(4, " (%s)", enable ? "turn on" : "turn off"); - - if (ov->bridge == BRG_OV511PLUS) - reg_w(ov, R511_SYS_LED_CTL, enable ? 1 : 0); - else if (ov->bclass == BCL_OV518) - reg_w_mask(ov, R518_GPIO_OUT, enable ? 0x02 : 0x00, 0x02); - - return; -} - -/* Matches the sensor's internal frame rate to the lighting frequency. - * Valid frequencies are: - * 50 - 50Hz, for European and Asian lighting - * 60 - 60Hz, for American lighting - * - * Tested with: OV7610, OV7620, OV76BE, OV6620 - * Unsupported: KS0127, KS0127B, SAA7111A - * Returns: 0 for success - */ -static int -sensor_set_light_freq(struct usb_ov511 *ov, int freq) -{ - int sixty; - - PDEBUG(4, "%d Hz", freq); - - if (freq == 60) - sixty = 1; - else if (freq == 50) - sixty = 0; - else { - err("Invalid light freq (%d Hz)", freq); - return -EINVAL; - } - - switch (ov->sensor) { - case SEN_OV7610: - i2c_w_mask(ov, 0x2a, sixty?0x00:0x80, 0x80); - i2c_w(ov, 0x2b, sixty?0x00:0xac); - i2c_w_mask(ov, 0x13, 0x10, 0x10); - i2c_w_mask(ov, 0x13, 0x00, 0x10); - break; - case SEN_OV7620: - case SEN_OV76BE: - case SEN_OV8600: - i2c_w_mask(ov, 0x2a, sixty?0x00:0x80, 0x80); - i2c_w(ov, 0x2b, sixty?0x00:0xac); - i2c_w_mask(ov, 0x76, 0x01, 0x01); - break; - case SEN_OV6620: - case SEN_OV6630: - i2c_w(ov, 0x2b, sixty?0xa8:0x28); - i2c_w(ov, 0x2a, sixty?0x84:0xa4); - break; - case SEN_KS0127: - case SEN_KS0127B: - case SEN_SAA7111A: - PDEBUG(5, "Unsupported with this sensor"); - return -EPERM; - default: - err("Sensor not supported for set_light_freq"); - return -EINVAL; - } - - ov->lightfreq = freq; - - return 0; -} - -/* If enable is true, turn on the sensor's banding filter, otherwise turn it - * off. This filter tries to reduce the pattern of horizontal light/dark bands - * caused by some (usually fluorescent) lighting. The light frequency must be - * set either before or after enabling it with ov51x_set_light_freq(). - * - * Tested with: OV7610, OV7620, OV76BE, OV6620. - * Unsupported: KS0127, KS0127B, SAA7111A - * Returns: 0 for success - */ -static int -sensor_set_banding_filter(struct usb_ov511 *ov, int enable) -{ - int rc; - - PDEBUG(4, " (%s)", enable ? "turn on" : "turn off"); - - if (ov->sensor == SEN_KS0127 || ov->sensor == SEN_KS0127B - || ov->sensor == SEN_SAA7111A) { - PDEBUG(5, "Unsupported with this sensor"); - return -EPERM; - } - - rc = i2c_w_mask(ov, 0x2d, enable?0x04:0x00, 0x04); - if (rc < 0) - return rc; - - ov->bandfilt = enable; - - return 0; -} - -/* If enable is true, turn on the sensor's auto brightness control, otherwise - * turn it off. - * - * Unsupported: KS0127, KS0127B, SAA7111A - * Returns: 0 for success - */ -static int -sensor_set_auto_brightness(struct usb_ov511 *ov, int enable) -{ - int rc; - - PDEBUG(4, " (%s)", enable ? "turn on" : "turn off"); - - if (ov->sensor == SEN_KS0127 || ov->sensor == SEN_KS0127B - || ov->sensor == SEN_SAA7111A) { - PDEBUG(5, "Unsupported with this sensor"); - return -EPERM; - } - - rc = i2c_w_mask(ov, 0x2d, enable?0x10:0x00, 0x10); - if (rc < 0) - return rc; - - ov->auto_brt = enable; - - return 0; -} - -/* If enable is true, turn on the sensor's auto exposure control, otherwise - * turn it off. - * - * Unsupported: KS0127, KS0127B, SAA7111A - * Returns: 0 for success - */ -static int -sensor_set_auto_exposure(struct usb_ov511 *ov, int enable) -{ - PDEBUG(4, " (%s)", enable ? "turn on" : "turn off"); - - switch (ov->sensor) { - case SEN_OV7610: - i2c_w_mask(ov, 0x29, enable?0x00:0x80, 0x80); - break; - case SEN_OV6620: - case SEN_OV7620: - case SEN_OV76BE: - case SEN_OV8600: - i2c_w_mask(ov, 0x13, enable?0x01:0x00, 0x01); - break; - case SEN_OV6630: - i2c_w_mask(ov, 0x28, enable?0x00:0x10, 0x10); - break; - case SEN_KS0127: - case SEN_KS0127B: - case SEN_SAA7111A: - PDEBUG(5, "Unsupported with this sensor"); - return -EPERM; - default: - err("Sensor not supported for set_auto_exposure"); - return -EINVAL; - } - - ov->auto_exp = enable; - - return 0; -} - -/* Modifies the sensor's exposure algorithm to allow proper exposure of objects - * that are illuminated from behind. - * - * Tested with: OV6620, OV7620 - * Unsupported: OV7610, OV76BE, KS0127, KS0127B, SAA7111A - * Returns: 0 for success - */ -static int -sensor_set_backlight(struct usb_ov511 *ov, int enable) -{ - PDEBUG(4, " (%s)", enable ? "turn on" : "turn off"); - - switch (ov->sensor) { - case SEN_OV7620: - case SEN_OV8600: - i2c_w_mask(ov, 0x68, enable?0xe0:0xc0, 0xe0); - i2c_w_mask(ov, 0x29, enable?0x08:0x00, 0x08); - i2c_w_mask(ov, 0x28, enable?0x02:0x00, 0x02); - break; - case SEN_OV6620: - i2c_w_mask(ov, 0x4e, enable?0xe0:0xc0, 0xe0); - i2c_w_mask(ov, 0x29, enable?0x08:0x00, 0x08); - i2c_w_mask(ov, 0x0e, enable?0x80:0x00, 0x80); - break; - case SEN_OV6630: - i2c_w_mask(ov, 0x4e, enable?0x80:0x60, 0xe0); - i2c_w_mask(ov, 0x29, enable?0x08:0x00, 0x08); - i2c_w_mask(ov, 0x28, enable?0x02:0x00, 0x02); - break; - case SEN_OV7610: - case SEN_OV76BE: - case SEN_KS0127: - case SEN_KS0127B: - case SEN_SAA7111A: - PDEBUG(5, "Unsupported with this sensor"); - return -EPERM; - default: - err("Sensor not supported for set_backlight"); - return -EINVAL; - } - - ov->backlight = enable; - - return 0; -} - -static int -sensor_set_mirror(struct usb_ov511 *ov, int enable) -{ - PDEBUG(4, " (%s)", enable ? "turn on" : "turn off"); - - switch (ov->sensor) { - case SEN_OV6620: - case SEN_OV6630: - case SEN_OV7610: - case SEN_OV7620: - case SEN_OV76BE: - case SEN_OV8600: - i2c_w_mask(ov, 0x12, enable?0x40:0x00, 0x40); - break; - case SEN_KS0127: - case SEN_KS0127B: - case SEN_SAA7111A: - PDEBUG(5, "Unsupported with this sensor"); - return -EPERM; - default: - err("Sensor not supported for set_mirror"); - return -EINVAL; - } - - ov->mirror = enable; - - return 0; -} - -/* Returns number of bits per pixel (regardless of where they are located; - * planar or not), or zero for unsupported format. - */ -static inline int -get_depth(int palette) -{ - switch (palette) { - case VIDEO_PALETTE_GREY: return 8; - case VIDEO_PALETTE_YUV420: return 12; - case VIDEO_PALETTE_YUV420P: return 12; /* Planar */ - default: return 0; /* Invalid format */ - } -} - -/* Bytes per frame. Used by read(). Return of 0 indicates error */ -static inline long int -get_frame_length(struct ov511_frame *frame) -{ - if (!frame) - return 0; - else - return ((frame->width * frame->height - * get_depth(frame->format)) >> 3); -} - -static int -mode_init_ov_sensor_regs(struct usb_ov511 *ov, int width, int height, - int mode, int sub_flag, int qvga) -{ - int clock; - - /******** Mode (VGA/QVGA) and sensor specific regs ********/ - - switch (ov->sensor) { - case SEN_OV7610: - i2c_w(ov, 0x14, qvga?0x24:0x04); -// FIXME: Does this improve the image quality or frame rate? -#if 0 - i2c_w_mask(ov, 0x28, qvga?0x00:0x20, 0x20); - i2c_w(ov, 0x24, 0x10); - i2c_w(ov, 0x25, qvga?0x40:0x8a); - i2c_w(ov, 0x2f, qvga?0x30:0xb0); - i2c_w(ov, 0x35, qvga?0x1c:0x9c); -#endif - break; - case SEN_OV7620: -// i2c_w(ov, 0x2b, 0x00); - i2c_w(ov, 0x14, qvga?0xa4:0x84); - i2c_w_mask(ov, 0x28, qvga?0x00:0x20, 0x20); - i2c_w(ov, 0x24, qvga?0x20:0x3a); - i2c_w(ov, 0x25, qvga?0x30:0x60); - i2c_w_mask(ov, 0x2d, qvga?0x40:0x00, 0x40); - i2c_w_mask(ov, 0x67, qvga?0xf0:0x90, 0xf0); - i2c_w_mask(ov, 0x74, qvga?0x20:0x00, 0x20); - break; - case SEN_OV76BE: -// i2c_w(ov, 0x2b, 0x00); - i2c_w(ov, 0x14, qvga?0xa4:0x84); -// FIXME: Enable this once 7620AE uses 7620 initial settings -#if 0 - i2c_w_mask(ov, 0x28, qvga?0x00:0x20, 0x20); - i2c_w(ov, 0x24, qvga?0x20:0x3a); - i2c_w(ov, 0x25, qvga?0x30:0x60); - i2c_w_mask(ov, 0x2d, qvga?0x40:0x00, 0x40); - i2c_w_mask(ov, 0x67, qvga?0xb0:0x90, 0xf0); - i2c_w_mask(ov, 0x74, qvga?0x20:0x00, 0x20); -#endif - break; - case SEN_OV6620: - i2c_w(ov, 0x14, qvga?0x24:0x04); - break; - case SEN_OV6630: - i2c_w(ov, 0x14, qvga?0xa0:0x80); - break; - default: - err("Invalid sensor"); - return -EINVAL; - } - - /******** Palette-specific regs ********/ - - if (mode == VIDEO_PALETTE_GREY) { - if (ov->sensor == SEN_OV7610 || ov->sensor == SEN_OV76BE) { - /* these aren't valid on the OV6620/OV7620/6630? */ - i2c_w_mask(ov, 0x0e, 0x40, 0x40); - } - - if (ov->sensor == SEN_OV6630 && ov->bridge == BRG_OV518 - && ov518_color) { - i2c_w_mask(ov, 0x12, 0x00, 0x10); - i2c_w_mask(ov, 0x13, 0x00, 0x20); - } else { - i2c_w_mask(ov, 0x13, 0x20, 0x20); - } - } else { - if (ov->sensor == SEN_OV7610 || ov->sensor == SEN_OV76BE) { - /* not valid on the OV6620/OV7620/6630? */ - i2c_w_mask(ov, 0x0e, 0x00, 0x40); - } - - /* The OV518 needs special treatment. Although both the OV518 - * and the OV6630 support a 16-bit video bus, only the 8 bit Y - * bus is actually used. The UV bus is tied to ground. - * Therefore, the OV6630 needs to be in 8-bit multiplexed - * output mode */ - - if (ov->sensor == SEN_OV6630 && ov->bridge == BRG_OV518 - && ov518_color) { - i2c_w_mask(ov, 0x12, 0x10, 0x10); - i2c_w_mask(ov, 0x13, 0x20, 0x20); - } else { - i2c_w_mask(ov, 0x13, 0x00, 0x20); - } - } - - /******** Clock programming ********/ - - /* The OV6620 needs special handling. This prevents the - * severe banding that normally occurs */ - if (ov->sensor == SEN_OV6620 || ov->sensor == SEN_OV6630) - { - /* Clock down */ - - i2c_w(ov, 0x2a, 0x04); - - if (ov->compress) { -// clock = 0; /* This ensures the highest frame rate */ - clock = 3; - } else if (clockdiv == -1) { /* If user didn't override it */ - clock = 3; /* Gives better exposure time */ - } else { - clock = clockdiv; - } - - PDEBUG(4, "Setting clock divisor to %d", clock); - - i2c_w(ov, 0x11, clock); - - i2c_w(ov, 0x2a, 0x84); - /* This next setting is critical. It seems to improve - * the gain or the contrast. The "reserved" bits seem - * to have some effect in this case. */ - i2c_w(ov, 0x2d, 0x85); - } - else - { - if (ov->compress) { - clock = 1; /* This ensures the highest frame rate */ - } else if (clockdiv == -1) { /* If user didn't override it */ - /* Calculate and set the clock divisor */ - clock = ((sub_flag ? ov->subw * ov->subh - : width * height) - * (mode == VIDEO_PALETTE_GREY ? 2 : 3) / 2) - / 66000; - } else { - clock = clockdiv; - } - - PDEBUG(4, "Setting clock divisor to %d", clock); - - i2c_w(ov, 0x11, clock); - } - - /******** Special Features ********/ - - if (framedrop >= 0) - i2c_w(ov, 0x16, framedrop); - - /* Test Pattern */ - i2c_w_mask(ov, 0x12, (testpat?0x02:0x00), 0x02); - - /* Enable auto white balance */ - i2c_w_mask(ov, 0x12, 0x04, 0x04); - - // This will go away as soon as ov51x_mode_init_sensor_regs() - // is fully tested. - /* 7620/6620/6630? don't have register 0x35, so play it safe */ - if (ov->sensor == SEN_OV7610 || ov->sensor == SEN_OV76BE) { - if (width == 640 && height == 480) - i2c_w(ov, 0x35, 0x9e); - else - i2c_w(ov, 0x35, 0x1e); - } - - return 0; -} - -static int -set_ov_sensor_window(struct usb_ov511 *ov, int width, int height, int mode, - int sub_flag) -{ - int ret; - int hwsbase, hwebase, vwsbase, vwebase, hwsize, vwsize; - int hoffset, voffset, hwscale = 0, vwscale = 0; - - /* The different sensor ICs handle setting up of window differently. - * IF YOU SET IT WRONG, YOU WILL GET ALL ZERO ISOC DATA FROM OV51x!!! */ - switch (ov->sensor) { - case SEN_OV7610: - case SEN_OV76BE: - hwsbase = 0x38; - hwebase = 0x3a; - vwsbase = vwebase = 0x05; - break; - case SEN_OV6620: - case SEN_OV6630: - hwsbase = 0x38; - hwebase = 0x3a; - vwsbase = 0x05; - vwebase = 0x06; - break; - case SEN_OV7620: - hwsbase = 0x2f; /* From 7620.SET (spec is wrong) */ - hwebase = 0x2f; - vwsbase = vwebase = 0x05; - break; - default: - err("Invalid sensor"); - return -EINVAL; - } - - if (ov->sensor == SEN_OV6620 || ov->sensor == SEN_OV6630) { - /* Note: OV518(+) does downsample on its own) */ - if ((width > 176 && height > 144) - || ov->bclass == BCL_OV518) { /* CIF */ - ret = mode_init_ov_sensor_regs(ov, width, height, - mode, sub_flag, 0); - if (ret < 0) - return ret; - hwscale = 1; - vwscale = 1; /* The datasheet says 0; it's wrong */ - hwsize = 352; - vwsize = 288; - } else if (width > 176 || height > 144) { - err("Illegal dimensions"); - return -EINVAL; - } else { /* QCIF */ - ret = mode_init_ov_sensor_regs(ov, width, height, - mode, sub_flag, 1); - if (ret < 0) - return ret; - hwsize = 176; - vwsize = 144; - } - } else { - if (width > 320 && height > 240) { /* VGA */ - ret = mode_init_ov_sensor_regs(ov, width, height, - mode, sub_flag, 0); - if (ret < 0) - return ret; - hwscale = 2; - vwscale = 1; - hwsize = 640; - vwsize = 480; - } else if (width > 320 || height > 240) { - err("Illegal dimensions"); - return -EINVAL; - } else { /* QVGA */ - ret = mode_init_ov_sensor_regs(ov, width, height, - mode, sub_flag, 1); - if (ret < 0) - return ret; - hwscale = 1; - hwsize = 320; - vwsize = 240; - } - } - - /* Center the window */ - hoffset = ((hwsize - width) / 2) >> hwscale; - voffset = ((vwsize - height) / 2) >> vwscale; - - /* FIXME! - This needs to be changed to support 160x120 and 6620!!! */ - if (sub_flag) { - i2c_w(ov, 0x17, hwsbase+(ov->subx>>hwscale)); - i2c_w(ov, 0x18, hwebase+((ov->subx+ov->subw)>>hwscale)); - i2c_w(ov, 0x19, vwsbase+(ov->suby>>vwscale)); - i2c_w(ov, 0x1a, vwebase+((ov->suby+ov->subh)>>vwscale)); - } else { - i2c_w(ov, 0x17, hwsbase + hoffset); - i2c_w(ov, 0x18, hwebase + hoffset + (hwsize>>hwscale)); - i2c_w(ov, 0x19, vwsbase + voffset); - i2c_w(ov, 0x1a, vwebase + voffset + (vwsize>>vwscale)); - } - -#ifdef OV511_DEBUG - if (dump_sensor) - dump_i2c_regs(ov); -#endif - - return 0; -} - -/* Set up the OV511/OV511+ with the given image parameters. - * - * Do not put any sensor-specific code in here (including I2C I/O functions) - */ -static int -ov511_mode_init_regs(struct usb_ov511 *ov, - int width, int height, int mode, int sub_flag) -{ - int hsegs, vsegs; - - if (sub_flag) { - width = ov->subw; - height = ov->subh; - } - - PDEBUG(3, "width:%d, height:%d, mode:%d, sub:%d", - width, height, mode, sub_flag); - - // FIXME: This should be moved to a 7111a-specific function once - // subcapture is dealt with properly - if (ov->sensor == SEN_SAA7111A) { - if (width == 320 && height == 240) { - /* No need to do anything special */ - } else if (width == 640 && height == 480) { - /* Set the OV511 up as 320x480, but keep the - * V4L resolution as 640x480 */ - width = 320; - } else { - err("SAA7111A only allows 320x240 or 640x480"); - return -EINVAL; - } - } - - /* Make sure width and height are a multiple of 8 */ - if (width % 8 || height % 8) { - err("Invalid size (%d, %d) (mode = %d)", width, height, mode); - return -EINVAL; - } - - if (width < ov->minwidth || height < ov->minheight) { - err("Requested dimensions are too small"); - return -EINVAL; - } - - if (ov51x_stop(ov) < 0) - return -EIO; - - if (mode == VIDEO_PALETTE_GREY) { - reg_w(ov, R511_CAM_UV_EN, 0x00); - reg_w(ov, R511_SNAP_UV_EN, 0x00); - reg_w(ov, R511_SNAP_OPTS, 0x01); - } else { - reg_w(ov, R511_CAM_UV_EN, 0x01); - reg_w(ov, R511_SNAP_UV_EN, 0x01); - reg_w(ov, R511_SNAP_OPTS, 0x03); - } - - /* Here I'm assuming that snapshot size == image size. - * I hope that's always true. --claudio - */ - hsegs = (width >> 3) - 1; - vsegs = (height >> 3) - 1; - - reg_w(ov, R511_CAM_PXCNT, hsegs); - reg_w(ov, R511_CAM_LNCNT, vsegs); - reg_w(ov, R511_CAM_PXDIV, 0x00); - reg_w(ov, R511_CAM_LNDIV, 0x00); - - /* YUV420, low pass filter on */ - reg_w(ov, R511_CAM_OPTS, 0x03); - - /* Snapshot additions */ - reg_w(ov, R511_SNAP_PXCNT, hsegs); - reg_w(ov, R511_SNAP_LNCNT, vsegs); - reg_w(ov, R511_SNAP_PXDIV, 0x00); - reg_w(ov, R511_SNAP_LNDIV, 0x00); - - if (ov->compress) { - /* Enable Y and UV quantization and compression */ - reg_w(ov, R511_COMP_EN, 0x07); - reg_w(ov, R511_COMP_LUT_EN, 0x03); - ov51x_reset(ov, OV511_RESET_OMNICE); - } - - if (ov51x_restart(ov) < 0) - return -EIO; - - return 0; -} - -/* Sets up the OV518/OV518+ with the given image parameters - * - * OV518 needs a completely different approach, until we can figure out what - * the individual registers do. Also, only 15 FPS is supported now. - * - * Do not put any sensor-specific code in here (including I2C I/O functions) - */ -static int -ov518_mode_init_regs(struct usb_ov511 *ov, - int width, int height, int mode, int sub_flag) -{ - int hsegs, vsegs, hi_res; - - if (sub_flag) { - width = ov->subw; - height = ov->subh; - } - - PDEBUG(3, "width:%d, height:%d, mode:%d, sub:%d", - width, height, mode, sub_flag); - - if (width % 16 || height % 8) { - err("Invalid size (%d, %d)", width, height); - return -EINVAL; - } - - if (width < ov->minwidth || height < ov->minheight) { - err("Requested dimensions are too small"); - return -EINVAL; - } - - if (width >= 320 && height >= 240) { - hi_res = 1; - } else if (width >= 320 || height >= 240) { - err("Invalid width/height combination (%d, %d)", width, height); - return -EINVAL; - } else { - hi_res = 0; - } - - if (ov51x_stop(ov) < 0) - return -EIO; - - /******** Set the mode ********/ - - reg_w(ov, 0x2b, 0); - reg_w(ov, 0x2c, 0); - reg_w(ov, 0x2d, 0); - reg_w(ov, 0x2e, 0); - reg_w(ov, 0x3b, 0); - reg_w(ov, 0x3c, 0); - reg_w(ov, 0x3d, 0); - reg_w(ov, 0x3e, 0); - - if (ov->bridge == BRG_OV518 && ov518_color) { - /* OV518 needs U and V swapped */ - i2c_w_mask(ov, 0x15, 0x00, 0x01); - - if (mode == VIDEO_PALETTE_GREY) { - /* Set 16-bit input format (UV data are ignored) */ - reg_w_mask(ov, 0x20, 0x00, 0x08); - - /* Set 8-bit (4:0:0) output format */ - reg_w_mask(ov, 0x28, 0x00, 0xf0); - reg_w_mask(ov, 0x38, 0x00, 0xf0); - } else { - /* Set 8-bit (YVYU) input format */ - reg_w_mask(ov, 0x20, 0x08, 0x08); - - /* Set 12-bit (4:2:0) output format */ - reg_w_mask(ov, 0x28, 0x80, 0xf0); - reg_w_mask(ov, 0x38, 0x80, 0xf0); - } - } else { - reg_w(ov, 0x28, (mode == VIDEO_PALETTE_GREY) ? 0x00:0x80); - reg_w(ov, 0x38, (mode == VIDEO_PALETTE_GREY) ? 0x00:0x80); - } - - hsegs = width / 16; - vsegs = height / 4; - - reg_w(ov, 0x29, hsegs); - reg_w(ov, 0x2a, vsegs); - - reg_w(ov, 0x39, hsegs); - reg_w(ov, 0x3a, vsegs); - - /* Windows driver does this here; who knows why */ - reg_w(ov, 0x2f, 0x80); - - /******** Set the framerate (to 15 FPS) ********/ - - /* Mode independent, but framerate dependent, regs */ - reg_w(ov, 0x51, 0x02); /* Clock divider; lower==faster */ - reg_w(ov, 0x22, 0x18); - reg_w(ov, 0x23, 0xff); - - if (ov->bridge == BRG_OV518PLUS) - reg_w(ov, 0x21, 0x19); - else - reg_w(ov, 0x71, 0x19); /* Compression-related? */ - - // FIXME: Sensor-specific - /* Bit 5 is what matters here. Of course, it is "reserved" */ - i2c_w(ov, 0x54, 0x23); - - reg_w(ov, 0x2f, 0x80); - - if (ov->bridge == BRG_OV518PLUS) { - reg_w(ov, 0x24, 0x94); - reg_w(ov, 0x25, 0x90); - ov518_reg_w32(ov, 0xc4, 400, 2); /* 190h */ - ov518_reg_w32(ov, 0xc6, 540, 2); /* 21ch */ - ov518_reg_w32(ov, 0xc7, 540, 2); /* 21ch */ - ov518_reg_w32(ov, 0xc8, 108, 2); /* 6ch */ - ov518_reg_w32(ov, 0xca, 131098, 3); /* 2001ah */ - ov518_reg_w32(ov, 0xcb, 532, 2); /* 214h */ - ov518_reg_w32(ov, 0xcc, 2400, 2); /* 960h */ - ov518_reg_w32(ov, 0xcd, 32, 2); /* 20h */ - ov518_reg_w32(ov, 0xce, 608, 2); /* 260h */ - } else { - reg_w(ov, 0x24, 0x9f); - reg_w(ov, 0x25, 0x90); - ov518_reg_w32(ov, 0xc4, 400, 2); /* 190h */ - ov518_reg_w32(ov, 0xc6, 500, 2); /* 1f4h */ - ov518_reg_w32(ov, 0xc7, 500, 2); /* 1f4h */ - ov518_reg_w32(ov, 0xc8, 142, 2); /* 8eh */ - ov518_reg_w32(ov, 0xca, 131098, 3); /* 2001ah */ - ov518_reg_w32(ov, 0xcb, 532, 2); /* 214h */ - ov518_reg_w32(ov, 0xcc, 2000, 2); /* 7d0h */ - ov518_reg_w32(ov, 0xcd, 32, 2); /* 20h */ - ov518_reg_w32(ov, 0xce, 608, 2); /* 260h */ - } - - reg_w(ov, 0x2f, 0x80); - - if (ov51x_restart(ov) < 0) - return -EIO; - - /* Reset it just for good measure */ - if (ov51x_reset(ov, OV511_RESET_NOREGS) < 0) - return -EIO; - - return 0; -} - -/* This is a wrapper around the OV511, OV518, and sensor specific functions */ -static int -mode_init_regs(struct usb_ov511 *ov, - int width, int height, int mode, int sub_flag) -{ - int rc = 0; - - if (!ov || !ov->dev) - return -EFAULT; - - if (ov->bclass == BCL_OV518) { - rc = ov518_mode_init_regs(ov, width, height, mode, sub_flag); - } else { - rc = ov511_mode_init_regs(ov, width, height, mode, sub_flag); - } - - if (FATAL_ERROR(rc)) - return rc; - - switch (ov->sensor) { - case SEN_OV7610: - case SEN_OV7620: - case SEN_OV76BE: - case SEN_OV8600: - case SEN_OV6620: - case SEN_OV6630: - rc = set_ov_sensor_window(ov, width, height, mode, sub_flag); - break; - case SEN_KS0127: - case SEN_KS0127B: - err("KS0127-series decoders not supported yet"); - rc = -EINVAL; - break; - case SEN_SAA7111A: -// rc = mode_init_saa_sensor_regs(ov, width, height, mode, -// sub_flag); - - PDEBUG(1, "SAA status = 0x%02X", i2c_r(ov, 0x1f)); - break; - default: - err("Unknown sensor"); - rc = -EINVAL; - } - - if (FATAL_ERROR(rc)) - return rc; - - /* Sensor-independent settings */ - rc = sensor_set_auto_brightness(ov, ov->auto_brt); - if (FATAL_ERROR(rc)) - return rc; - - rc = sensor_set_auto_exposure(ov, ov->auto_exp); - if (FATAL_ERROR(rc)) - return rc; - - rc = sensor_set_banding_filter(ov, bandingfilter); - if (FATAL_ERROR(rc)) - return rc; - - if (ov->lightfreq) { - rc = sensor_set_light_freq(ov, lightfreq); - if (FATAL_ERROR(rc)) - return rc; - } - - rc = sensor_set_backlight(ov, ov->backlight); - if (FATAL_ERROR(rc)) - return rc; - - rc = sensor_set_mirror(ov, ov->mirror); - if (FATAL_ERROR(rc)) - return rc; - - return 0; -} - -/* This sets the default image parameters. This is useful for apps that use - * read() and do not set these. - */ -static int -ov51x_set_default_params(struct usb_ov511 *ov) -{ - int i; - - /* Set default sizes in case IOCTL (VIDIOCMCAPTURE) is not used - * (using read() instead). */ - for (i = 0; i < OV511_NUMFRAMES; i++) { - ov->frame[i].width = ov->maxwidth; - ov->frame[i].height = ov->maxheight; - ov->frame[i].bytes_read = 0; - if (force_palette) - ov->frame[i].format = force_palette; - else - ov->frame[i].format = VIDEO_PALETTE_YUV420; - - ov->frame[i].depth = get_depth(ov->frame[i].format); - } - - PDEBUG(3, "%dx%d, %s", ov->maxwidth, ov->maxheight, - symbolic(v4l1_plist, ov->frame[0].format)); - - /* Initialize to max width/height, YUV420 or RGB24 (if supported) */ - if (mode_init_regs(ov, ov->maxwidth, ov->maxheight, - ov->frame[0].format, 0) < 0) - return -EINVAL; - - return 0; -} - -/********************************************************************** - * - * Video decoder stuff - * - **********************************************************************/ - -/* Set analog input port of decoder */ -static int -decoder_set_input(struct usb_ov511 *ov, int input) -{ - PDEBUG(4, "port %d", input); - - switch (ov->sensor) { - case SEN_SAA7111A: - { - /* Select mode */ - i2c_w_mask(ov, 0x02, input, 0x07); - /* Bypass chrominance trap for modes 4..7 */ - i2c_w_mask(ov, 0x09, (input > 3) ? 0x80:0x00, 0x80); - break; - } - default: - return -EINVAL; - } - - return 0; -} - -/* Get ASCII name of video input */ -static int -decoder_get_input_name(struct usb_ov511 *ov, int input, char *name) -{ - switch (ov->sensor) { - case SEN_SAA7111A: - { - if (input < 0 || input > 7) - return -EINVAL; - else if (input < 4) - sprintf(name, "CVBS-%d", input); - else // if (input < 8) - sprintf(name, "S-Video-%d", input - 4); - break; - } - default: - sprintf(name, "%s", "Camera"); - } - - return 0; -} - -/* Set norm (NTSC, PAL, SECAM, AUTO) */ -static int -decoder_set_norm(struct usb_ov511 *ov, int norm) -{ - PDEBUG(4, "%d", norm); - - switch (ov->sensor) { - case SEN_SAA7111A: - { - int reg_8, reg_e; - - if (norm == VIDEO_MODE_NTSC) { - reg_8 = 0x40; /* 60 Hz */ - reg_e = 0x00; /* NTSC M / PAL BGHI */ - } else if (norm == VIDEO_MODE_PAL) { - reg_8 = 0x00; /* 50 Hz */ - reg_e = 0x00; /* NTSC M / PAL BGHI */ - } else if (norm == VIDEO_MODE_AUTO) { - reg_8 = 0x80; /* Auto field detect */ - reg_e = 0x00; /* NTSC M / PAL BGHI */ - } else if (norm == VIDEO_MODE_SECAM) { - reg_8 = 0x00; /* 50 Hz */ - reg_e = 0x50; /* SECAM / PAL 4.43 */ - } else { - return -EINVAL; - } - - i2c_w_mask(ov, 0x08, reg_8, 0xc0); - i2c_w_mask(ov, 0x0e, reg_e, 0x70); - break; - } - default: - return -EINVAL; - } - - return 0; -} - -/********************************************************************** - * - * Raw data parsing - * - **********************************************************************/ - -/* Copies a 64-byte segment at pIn to an 8x8 block at pOut. The width of the - * image at pOut is specified by w. - */ -static inline void -make_8x8(unsigned char *pIn, unsigned char *pOut, int w) -{ - unsigned char *pOut1 = pOut; - int x, y; - - for (y = 0; y < 8; y++) { - pOut1 = pOut; - for (x = 0; x < 8; x++) { - *pOut1++ = *pIn++; - } - pOut += w; - } -} - -/* - * For RAW BW (YUV 4:0:0) images, data show up in 256 byte segments. - * The segments represent 4 squares of 8x8 pixels as follows: - * - * 0 1 ... 7 64 65 ... 71 ... 192 193 ... 199 - * 8 9 ... 15 72 73 ... 79 200 201 ... 207 - * ... ... ... - * 56 57 ... 63 120 121 ... 127 248 249 ... 255 - * - */ -static void -yuv400raw_to_yuv400p(struct ov511_frame *frame, - unsigned char *pIn0, unsigned char *pOut0) -{ - int x, y; - unsigned char *pIn, *pOut, *pOutLine; - - /* Copy Y */ - pIn = pIn0; - pOutLine = pOut0; - for (y = 0; y < frame->rawheight - 1; y += 8) { - pOut = pOutLine; - for (x = 0; x < frame->rawwidth - 1; x += 8) { - make_8x8(pIn, pOut, frame->rawwidth); - pIn += 64; - pOut += 8; - } - pOutLine += 8 * frame->rawwidth; - } -} - -/* - * For YUV 4:2:0 images, the data show up in 384 byte segments. - * The first 64 bytes of each segment are U, the next 64 are V. The U and - * V are arranged as follows: - * - * 0 1 ... 7 - * 8 9 ... 15 - * ... - * 56 57 ... 63 - * - * U and V are shipped at half resolution (1 U,V sample -> one 2x2 block). - * - * The next 256 bytes are full resolution Y data and represent 4 squares - * of 8x8 pixels as follows: - * - * 0 1 ... 7 64 65 ... 71 ... 192 193 ... 199 - * 8 9 ... 15 72 73 ... 79 200 201 ... 207 - * ... ... ... - * 56 57 ... 63 120 121 ... 127 ... 248 249 ... 255 - * - * Note that the U and V data in one segment represent a 16 x 16 pixel - * area, but the Y data represent a 32 x 8 pixel area. If the width is not an - * even multiple of 32, the extra 8x8 blocks within a 32x8 block belong to the - * next horizontal stripe. - * - * If dumppix module param is set, _parse_data just dumps the incoming segments, - * verbatim, in order, into the frame. When used with vidcat -f ppm -s 640x480 - * this puts the data on the standard output and can be analyzed with the - * parseppm.c utility I wrote. That's a much faster way for figuring out how - * these data are scrambled. - */ - -/* Converts from raw, uncompressed segments at pIn0 to a YUV420P frame at pOut0. - * - * FIXME: Currently only handles width and height that are multiples of 16 - */ -static void -yuv420raw_to_yuv420p(struct ov511_frame *frame, - unsigned char *pIn0, unsigned char *pOut0) -{ - int k, x, y; - unsigned char *pIn, *pOut, *pOutLine; - const unsigned int a = frame->rawwidth * frame->rawheight; - const unsigned int w = frame->rawwidth / 2; - - /* Copy U and V */ - pIn = pIn0; - pOutLine = pOut0 + a; - for (y = 0; y < frame->rawheight - 1; y += 16) { - pOut = pOutLine; - for (x = 0; x < frame->rawwidth - 1; x += 16) { - make_8x8(pIn, pOut, w); - make_8x8(pIn + 64, pOut + a/4, w); - pIn += 384; - pOut += 8; - } - pOutLine += 8 * w; - } - - /* Copy Y */ - pIn = pIn0 + 128; - pOutLine = pOut0; - k = 0; - for (y = 0; y < frame->rawheight - 1; y += 8) { - pOut = pOutLine; - for (x = 0; x < frame->rawwidth - 1; x += 8) { - make_8x8(pIn, pOut, frame->rawwidth); - pIn += 64; - pOut += 8; - if ((++k) > 3) { - k = 0; - pIn += 128; - } - } - pOutLine += 8 * frame->rawwidth; - } -} - -/********************************************************************** - * - * Decompression - * - **********************************************************************/ - -static int -request_decompressor(struct usb_ov511 *ov) -{ - if (ov->bclass == BCL_OV511 || ov->bclass == BCL_OV518) { - err("No decompressor available"); - } else { - err("Unknown bridge"); - } - - return -ENOSYS; -} - -static void -decompress(struct usb_ov511 *ov, struct ov511_frame *frame, - unsigned char *pIn0, unsigned char *pOut0) -{ - if (!ov->decomp_ops) - if (request_decompressor(ov)) - return; - -} - -/********************************************************************** - * - * Format conversion - * - **********************************************************************/ - -/* Fuses even and odd fields together, and doubles width. - * INPUT: an odd field followed by an even field at pIn0, in YUV planar format - * OUTPUT: a normal YUV planar image, with correct aspect ratio - */ -static void -deinterlace(struct ov511_frame *frame, int rawformat, - unsigned char *pIn0, unsigned char *pOut0) -{ - const int fieldheight = frame->rawheight / 2; - const int fieldpix = fieldheight * frame->rawwidth; - const int w = frame->width; - int x, y; - unsigned char *pInEven, *pInOdd, *pOut; - - PDEBUG(5, "fieldheight=%d", fieldheight); - - if (frame->rawheight != frame->height) { - err("invalid height"); - return; - } - - if ((frame->rawwidth * 2) != frame->width) { - err("invalid width"); - return; - } - - /* Y */ - pInOdd = pIn0; - pInEven = pInOdd + fieldpix; - pOut = pOut0; - for (y = 0; y < fieldheight; y++) { - for (x = 0; x < frame->rawwidth; x++) { - *pOut = *pInEven; - *(pOut+1) = *pInEven++; - *(pOut+w) = *pInOdd; - *(pOut+w+1) = *pInOdd++; - pOut += 2; - } - pOut += w; - } - - if (rawformat == RAWFMT_YUV420) { - /* U */ - pInOdd = pIn0 + fieldpix * 2; - pInEven = pInOdd + fieldpix / 4; - for (y = 0; y < fieldheight / 2; y++) { - for (x = 0; x < frame->rawwidth / 2; x++) { - *pOut = *pInEven; - *(pOut+1) = *pInEven++; - *(pOut+w/2) = *pInOdd; - *(pOut+w/2+1) = *pInOdd++; - pOut += 2; - } - pOut += w/2; - } - /* V */ - pInOdd = pIn0 + fieldpix * 2 + fieldpix / 2; - pInEven = pInOdd + fieldpix / 4; - for (y = 0; y < fieldheight / 2; y++) { - for (x = 0; x < frame->rawwidth / 2; x++) { - *pOut = *pInEven; - *(pOut+1) = *pInEven++; - *(pOut+w/2) = *pInOdd; - *(pOut+w/2+1) = *pInOdd++; - pOut += 2; - } - pOut += w/2; - } - } -} - -static void -ov51x_postprocess_grey(struct usb_ov511 *ov, struct ov511_frame *frame) -{ - /* Deinterlace frame, if necessary */ - if (ov->sensor == SEN_SAA7111A && frame->rawheight >= 480) { - if (frame->compressed) - decompress(ov, frame, frame->rawdata, - frame->tempdata); - else - yuv400raw_to_yuv400p(frame, frame->rawdata, - frame->tempdata); - - deinterlace(frame, RAWFMT_YUV400, frame->tempdata, - frame->data); - } else { - if (frame->compressed) - decompress(ov, frame, frame->rawdata, - frame->data); - else - yuv400raw_to_yuv400p(frame, frame->rawdata, - frame->data); - } -} - -/* Process raw YUV420 data into standard YUV420P */ -static void -ov51x_postprocess_yuv420(struct usb_ov511 *ov, struct ov511_frame *frame) -{ - /* Deinterlace frame, if necessary */ - if (ov->sensor == SEN_SAA7111A && frame->rawheight >= 480) { - if (frame->compressed) - decompress(ov, frame, frame->rawdata, frame->tempdata); - else - yuv420raw_to_yuv420p(frame, frame->rawdata, - frame->tempdata); - - deinterlace(frame, RAWFMT_YUV420, frame->tempdata, - frame->data); - } else { - if (frame->compressed) - decompress(ov, frame, frame->rawdata, frame->data); - else - yuv420raw_to_yuv420p(frame, frame->rawdata, - frame->data); - } -} - -/* Post-processes the specified frame. This consists of: - * 1. Decompress frame, if necessary - * 2. Deinterlace frame and scale to proper size, if necessary - * 3. Convert from YUV planar to destination format, if necessary - * 4. Fix the RGB offset, if necessary - */ -static void -ov51x_postprocess(struct usb_ov511 *ov, struct ov511_frame *frame) -{ - if (dumppix) { - memset(frame->data, 0, - MAX_DATA_SIZE(ov->maxwidth, ov->maxheight)); - PDEBUG(4, "Dumping %d bytes", frame->bytes_recvd); - memcpy(frame->data, frame->rawdata, frame->bytes_recvd); - } else { - switch (frame->format) { - case VIDEO_PALETTE_GREY: - ov51x_postprocess_grey(ov, frame); - break; - case VIDEO_PALETTE_YUV420: - case VIDEO_PALETTE_YUV420P: - ov51x_postprocess_yuv420(ov, frame); - break; - default: - err("Cannot convert data to %s", - symbolic(v4l1_plist, frame->format)); - } - } -} - -/********************************************************************** - * - * OV51x data transfer, IRQ handler - * - **********************************************************************/ - -static inline void -ov511_move_data(struct usb_ov511 *ov, unsigned char *in, int n) -{ - int num, offset; - int pnum = in[ov->packet_size - 1]; /* Get packet number */ - int max_raw = MAX_RAW_DATA_SIZE(ov->maxwidth, ov->maxheight); - struct ov511_frame *frame = &ov->frame[ov->curframe]; - struct timeval *ts; - - /* SOF/EOF packets have 1st to 8th bytes zeroed and the 9th - * byte non-zero. The EOF packet has image width/height in the - * 10th and 11th bytes. The 9th byte is given as follows: - * - * bit 7: EOF - * 6: compression enabled - * 5: 422/420/400 modes - * 4: 422/420/400 modes - * 3: 1 - * 2: snapshot button on - * 1: snapshot frame - * 0: even/odd field - */ - - if (printph) { - dev_info(&ov->dev->dev, - "ph(%3d): %2x %2x %2x %2x %2x %2x %2x %2x %2x %2x %2x %2x\n", - pnum, in[0], in[1], in[2], in[3], in[4], in[5], in[6], - in[7], in[8], in[9], in[10], in[11]); - } - - /* Check for SOF/EOF packet */ - if ((in[0] | in[1] | in[2] | in[3] | in[4] | in[5] | in[6] | in[7]) || - (~in[8] & 0x08)) - goto check_middle; - - /* Frame end */ - if (in[8] & 0x80) { - ts = (struct timeval *)(frame->data - + MAX_FRAME_SIZE(ov->maxwidth, ov->maxheight)); - do_gettimeofday(ts); - - /* Get the actual frame size from the EOF header */ - frame->rawwidth = ((int)(in[9]) + 1) * 8; - frame->rawheight = ((int)(in[10]) + 1) * 8; - - PDEBUG(4, "Frame end, frame=%d, pnum=%d, w=%d, h=%d, recvd=%d", - ov->curframe, pnum, frame->rawwidth, frame->rawheight, - frame->bytes_recvd); - - /* Validate the header data */ - RESTRICT_TO_RANGE(frame->rawwidth, ov->minwidth, ov->maxwidth); - RESTRICT_TO_RANGE(frame->rawheight, ov->minheight, - ov->maxheight); - - /* Don't allow byte count to exceed buffer size */ - RESTRICT_TO_RANGE(frame->bytes_recvd, 8, max_raw); - - if (frame->scanstate == STATE_LINES) { - int nextf; - - frame->grabstate = FRAME_DONE; - wake_up_interruptible(&frame->wq); - - /* If next frame is ready or grabbing, - * point to it */ - nextf = (ov->curframe + 1) % OV511_NUMFRAMES; - if (ov->frame[nextf].grabstate == FRAME_READY - || ov->frame[nextf].grabstate == FRAME_GRABBING) { - ov->curframe = nextf; - ov->frame[nextf].scanstate = STATE_SCANNING; - } else { - if (frame->grabstate == FRAME_DONE) { - PDEBUG(4, "** Frame done **"); - } else { - PDEBUG(4, "Frame not ready? state = %d", - ov->frame[nextf].grabstate); - } - - ov->curframe = -1; - } - } else { - PDEBUG(5, "Frame done, but not scanning"); - } - /* Image corruption caused by misplaced frame->segment = 0 - * fixed by carlosf@conectiva.com.br - */ - } else { - /* Frame start */ - PDEBUG(4, "Frame start, framenum = %d", ov->curframe); - - /* Check to see if it's a snapshot frame */ - /* FIXME?? Should the snapshot reset go here? Performance? */ - if (in[8] & 0x02) { - frame->snapshot = 1; - PDEBUG(3, "snapshot detected"); - } - - frame->scanstate = STATE_LINES; - frame->bytes_recvd = 0; - frame->compressed = in[8] & 0x40; - } - -check_middle: - /* Are we in a frame? */ - if (frame->scanstate != STATE_LINES) { - PDEBUG(5, "Not in a frame; packet skipped"); - return; - } - - /* If frame start, skip header */ - if (frame->bytes_recvd == 0) - offset = 9; - else - offset = 0; - - num = n - offset - 1; - - /* Dump all data exactly as received */ - if (dumppix == 2) { - frame->bytes_recvd += n - 1; - if (frame->bytes_recvd <= max_raw) - memcpy(frame->rawdata + frame->bytes_recvd - (n - 1), - in, n - 1); - else - PDEBUG(3, "Raw data buffer overrun!! (%d)", - frame->bytes_recvd - max_raw); - } else if (!frame->compressed && !remove_zeros) { - frame->bytes_recvd += num; - if (frame->bytes_recvd <= max_raw) - memcpy(frame->rawdata + frame->bytes_recvd - num, - in + offset, num); - else - PDEBUG(3, "Raw data buffer overrun!! (%d)", - frame->bytes_recvd - max_raw); - } else { /* Remove all-zero FIFO lines (aligned 32-byte blocks) */ - int b, read = 0, allzero, copied = 0; - if (offset) { - frame->bytes_recvd += 32 - offset; // Bytes out - memcpy(frame->rawdata, in + offset, 32 - offset); - read += 32; - } - - while (read < n - 1) { - allzero = 1; - for (b = 0; b < 32; b++) { - if (in[read + b]) { - allzero = 0; - break; - } - } - - if (allzero) { - /* Don't copy it */ - } else { - if (frame->bytes_recvd + copied + 32 <= max_raw) - { - memcpy(frame->rawdata - + frame->bytes_recvd + copied, - in + read, 32); - copied += 32; - } else { - PDEBUG(3, "Raw data buffer overrun!!"); - } - } - read += 32; - } - - frame->bytes_recvd += copied; - } -} - -static inline void -ov518_move_data(struct usb_ov511 *ov, unsigned char *in, int n) -{ - int max_raw = MAX_RAW_DATA_SIZE(ov->maxwidth, ov->maxheight); - struct ov511_frame *frame = &ov->frame[ov->curframe]; - struct timeval *ts; - - /* Don't copy the packet number byte */ - if (ov->packet_numbering) - --n; - - /* A false positive here is likely, until OVT gives me - * the definitive SOF/EOF format */ - if ((!(in[0] | in[1] | in[2] | in[3] | in[5])) && in[6]) { - if (printph) { - dev_info(&ov->dev->dev, - "ph: %2x %2x %2x %2x %2x %2x %2x %2x\n", - in[0], in[1], in[2], in[3], in[4], in[5], - in[6], in[7]); - } - - if (frame->scanstate == STATE_LINES) { - PDEBUG(4, "Detected frame end/start"); - goto eof; - } else { //scanstate == STATE_SCANNING - /* Frame start */ - PDEBUG(4, "Frame start, framenum = %d", ov->curframe); - goto sof; - } - } else { - goto check_middle; - } - -eof: - ts = (struct timeval *)(frame->data - + MAX_FRAME_SIZE(ov->maxwidth, ov->maxheight)); - do_gettimeofday(ts); - - PDEBUG(4, "Frame end, curframe = %d, hw=%d, vw=%d, recvd=%d", - ov->curframe, - (int)(in[9]), (int)(in[10]), frame->bytes_recvd); - - // FIXME: Since we don't know the header formats yet, - // there is no way to know what the actual image size is - frame->rawwidth = frame->width; - frame->rawheight = frame->height; - - /* Validate the header data */ - RESTRICT_TO_RANGE(frame->rawwidth, ov->minwidth, ov->maxwidth); - RESTRICT_TO_RANGE(frame->rawheight, ov->minheight, ov->maxheight); - - /* Don't allow byte count to exceed buffer size */ - RESTRICT_TO_RANGE(frame->bytes_recvd, 8, max_raw); - - if (frame->scanstate == STATE_LINES) { - int nextf; - - frame->grabstate = FRAME_DONE; - wake_up_interruptible(&frame->wq); - - /* If next frame is ready or grabbing, - * point to it */ - nextf = (ov->curframe + 1) % OV511_NUMFRAMES; - if (ov->frame[nextf].grabstate == FRAME_READY - || ov->frame[nextf].grabstate == FRAME_GRABBING) { - ov->curframe = nextf; - ov->frame[nextf].scanstate = STATE_SCANNING; - frame = &ov->frame[nextf]; - } else { - if (frame->grabstate == FRAME_DONE) { - PDEBUG(4, "** Frame done **"); - } else { - PDEBUG(4, "Frame not ready? state = %d", - ov->frame[nextf].grabstate); - } - - ov->curframe = -1; - PDEBUG(4, "SOF dropped (no active frame)"); - return; /* Nowhere to store this frame */ - } - } -sof: - PDEBUG(4, "Starting capture on frame %d", frame->framenum); - -// Snapshot not reverse-engineered yet. -#if 0 - /* Check to see if it's a snapshot frame */ - /* FIXME?? Should the snapshot reset go here? Performance? */ - if (in[8] & 0x02) { - frame->snapshot = 1; - PDEBUG(3, "snapshot detected"); - } -#endif - frame->scanstate = STATE_LINES; - frame->bytes_recvd = 0; - frame->compressed = 1; - -check_middle: - /* Are we in a frame? */ - if (frame->scanstate != STATE_LINES) { - PDEBUG(4, "scanstate: no SOF yet"); - return; - } - - /* Dump all data exactly as received */ - if (dumppix == 2) { - frame->bytes_recvd += n; - if (frame->bytes_recvd <= max_raw) - memcpy(frame->rawdata + frame->bytes_recvd - n, in, n); - else - PDEBUG(3, "Raw data buffer overrun!! (%d)", - frame->bytes_recvd - max_raw); - } else { - /* All incoming data are divided into 8-byte segments. If the - * segment contains all zero bytes, it must be skipped. These - * zero-segments allow the OV518 to mainain a constant data rate - * regardless of the effectiveness of the compression. Segments - * are aligned relative to the beginning of each isochronous - * packet. The first segment in each image is a header (the - * decompressor skips it later). - */ - - int b, read = 0, allzero, copied = 0; - - while (read < n) { - allzero = 1; - for (b = 0; b < 8; b++) { - if (in[read + b]) { - allzero = 0; - break; - } - } - - if (allzero) { - /* Don't copy it */ - } else { - if (frame->bytes_recvd + copied + 8 <= max_raw) - { - memcpy(frame->rawdata - + frame->bytes_recvd + copied, - in + read, 8); - copied += 8; - } else { - PDEBUG(3, "Raw data buffer overrun!!"); - } - } - read += 8; - } - frame->bytes_recvd += copied; - } -} - -static void -ov51x_isoc_irq(struct urb *urb) -{ - int i; - struct usb_ov511 *ov; - struct ov511_sbuf *sbuf; - - if (!urb->context) { - PDEBUG(4, "no context"); - return; - } - - sbuf = urb->context; - ov = sbuf->ov; - - if (!ov || !ov->dev || !ov->user) { - PDEBUG(4, "no device, or not open"); - return; - } - - if (!ov->streaming) { - PDEBUG(4, "hmmm... not streaming, but got interrupt"); - return; - } - - if (urb->status == -ENOENT || urb->status == -ECONNRESET) { - PDEBUG(4, "URB unlinked"); - return; - } - - if (urb->status != -EINPROGRESS && urb->status != 0) { - err("ERROR: urb->status=%d: %s", urb->status, - symbolic(urb_errlist, urb->status)); - } - - /* Copy the data received into our frame buffer */ - PDEBUG(5, "sbuf[%d]: Moving %d packets", sbuf->n, - urb->number_of_packets); - for (i = 0; i < urb->number_of_packets; i++) { - /* Warning: Don't call *_move_data() if no frame active! */ - if (ov->curframe >= 0) { - int n = urb->iso_frame_desc[i].actual_length; - int st = urb->iso_frame_desc[i].status; - unsigned char *cdata; - - urb->iso_frame_desc[i].actual_length = 0; - urb->iso_frame_desc[i].status = 0; - - cdata = urb->transfer_buffer - + urb->iso_frame_desc[i].offset; - - if (!n) { - PDEBUG(4, "Zero-length packet"); - continue; - } - - if (st) - PDEBUG(2, "data error: [%d] len=%d, status=%d", - i, n, st); - - if (ov->bclass == BCL_OV511) - ov511_move_data(ov, cdata, n); - else if (ov->bclass == BCL_OV518) - ov518_move_data(ov, cdata, n); - else - err("Unknown bridge device (%d)", ov->bridge); - - } else if (waitqueue_active(&ov->wq)) { - wake_up_interruptible(&ov->wq); - } - } - - /* Resubmit this URB */ - urb->dev = ov->dev; - if ((i = usb_submit_urb(urb, GFP_ATOMIC)) != 0) - err("usb_submit_urb() ret %d", i); - - return; -} - -/**************************************************************************** - * - * Stream initialization and termination - * - ***************************************************************************/ - -static int -ov51x_init_isoc(struct usb_ov511 *ov) -{ - struct urb *urb; - int fx, err, n, i, size; - - PDEBUG(3, "*** Initializing capture ***"); - - ov->curframe = -1; - - if (ov->bridge == BRG_OV511) { - if (cams == 1) - size = 993; - else if (cams == 2) - size = 513; - else if (cams == 3 || cams == 4) - size = 257; - else { - err("\"cams\" parameter too high!"); - return -1; - } - } else if (ov->bridge == BRG_OV511PLUS) { - if (cams == 1) - size = 961; - else if (cams == 2) - size = 513; - else if (cams == 3 || cams == 4) - size = 257; - else if (cams >= 5 && cams <= 8) - size = 129; - else if (cams >= 9 && cams <= 31) - size = 33; - else { - err("\"cams\" parameter too high!"); - return -1; - } - } else if (ov->bclass == BCL_OV518) { - if (cams == 1) - size = 896; - else if (cams == 2) - size = 512; - else if (cams == 3 || cams == 4) - size = 256; - else if (cams >= 5 && cams <= 8) - size = 128; - else { - err("\"cams\" parameter too high!"); - return -1; - } - } else { - err("invalid bridge type"); - return -1; - } - - // FIXME: OV518 is hardcoded to 15 FPS (alternate 5) for now - if (ov->bclass == BCL_OV518) { - if (packetsize == -1) { - ov518_set_packet_size(ov, 640); - } else { - dev_info(&ov->dev->dev, "Forcing packet size to %d\n", - packetsize); - ov518_set_packet_size(ov, packetsize); - } - } else { - if (packetsize == -1) { - ov511_set_packet_size(ov, size); - } else { - dev_info(&ov->dev->dev, "Forcing packet size to %d\n", - packetsize); - ov511_set_packet_size(ov, packetsize); - } - } - - for (n = 0; n < OV511_NUMSBUF; n++) { - urb = usb_alloc_urb(FRAMES_PER_DESC, GFP_KERNEL); - if (!urb) { - err("init isoc: usb_alloc_urb ret. NULL"); - for (i = 0; i < n; i++) - usb_free_urb(ov->sbuf[i].urb); - return -ENOMEM; - } - ov->sbuf[n].urb = urb; - urb->dev = ov->dev; - urb->context = &ov->sbuf[n]; - urb->pipe = usb_rcvisocpipe(ov->dev, OV511_ENDPOINT_ADDRESS); - urb->transfer_flags = URB_ISO_ASAP; - urb->transfer_buffer = ov->sbuf[n].data; - urb->complete = ov51x_isoc_irq; - urb->number_of_packets = FRAMES_PER_DESC; - urb->transfer_buffer_length = ov->packet_size * FRAMES_PER_DESC; - urb->interval = 1; - for (fx = 0; fx < FRAMES_PER_DESC; fx++) { - urb->iso_frame_desc[fx].offset = ov->packet_size * fx; - urb->iso_frame_desc[fx].length = ov->packet_size; - } - } - - ov->streaming = 1; - - for (n = 0; n < OV511_NUMSBUF; n++) { - ov->sbuf[n].urb->dev = ov->dev; - err = usb_submit_urb(ov->sbuf[n].urb, GFP_KERNEL); - if (err) { - err("init isoc: usb_submit_urb(%d) ret %d", n, err); - return err; - } - } - - return 0; -} - -static void -ov51x_unlink_isoc(struct usb_ov511 *ov) -{ - int n; - - /* Unschedule all of the iso td's */ - for (n = OV511_NUMSBUF - 1; n >= 0; n--) { - if (ov->sbuf[n].urb) { - usb_kill_urb(ov->sbuf[n].urb); - usb_free_urb(ov->sbuf[n].urb); - ov->sbuf[n].urb = NULL; - } - } -} - -static void -ov51x_stop_isoc(struct usb_ov511 *ov) -{ - if (!ov->streaming || !ov->dev) - return; - - PDEBUG(3, "*** Stopping capture ***"); - - if (ov->bclass == BCL_OV518) - ov518_set_packet_size(ov, 0); - else - ov511_set_packet_size(ov, 0); - - ov->streaming = 0; - - ov51x_unlink_isoc(ov); -} - -static int -ov51x_new_frame(struct usb_ov511 *ov, int framenum) -{ - struct ov511_frame *frame; - int newnum; - - PDEBUG(4, "ov->curframe = %d, framenum = %d", ov->curframe, framenum); - - if (!ov->dev) - return -1; - - /* If we're not grabbing a frame right now and the other frame is */ - /* ready to be grabbed into, then use it instead */ - if (ov->curframe == -1) { - newnum = (framenum - 1 + OV511_NUMFRAMES) % OV511_NUMFRAMES; - if (ov->frame[newnum].grabstate == FRAME_READY) - framenum = newnum; - } else - return 0; - - frame = &ov->frame[framenum]; - - PDEBUG(4, "framenum = %d, width = %d, height = %d", framenum, - frame->width, frame->height); - - frame->grabstate = FRAME_GRABBING; - frame->scanstate = STATE_SCANNING; - frame->snapshot = 0; - - ov->curframe = framenum; - - /* Make sure it's not too big */ - if (frame->width > ov->maxwidth) - frame->width = ov->maxwidth; - - frame->width &= ~7L; /* Multiple of 8 */ - - if (frame->height > ov->maxheight) - frame->height = ov->maxheight; - - frame->height &= ~3L; /* Multiple of 4 */ - - return 0; -} - -/**************************************************************************** - * - * Buffer management - * - ***************************************************************************/ - -/* - * - You must acquire buf_lock before entering this function. - * - Because this code will free any non-null pointer, you must be sure to null - * them if you explicitly free them somewhere else! - */ -static void -ov51x_do_dealloc(struct usb_ov511 *ov) -{ - int i; - PDEBUG(4, "entered"); - - if (ov->fbuf) { - rvfree(ov->fbuf, OV511_NUMFRAMES - * MAX_DATA_SIZE(ov->maxwidth, ov->maxheight)); - ov->fbuf = NULL; - } - - vfree(ov->rawfbuf); - ov->rawfbuf = NULL; - - vfree(ov->tempfbuf); - ov->tempfbuf = NULL; - - for (i = 0; i < OV511_NUMSBUF; i++) { - kfree(ov->sbuf[i].data); - ov->sbuf[i].data = NULL; - } - - for (i = 0; i < OV511_NUMFRAMES; i++) { - ov->frame[i].data = NULL; - ov->frame[i].rawdata = NULL; - ov->frame[i].tempdata = NULL; - if (ov->frame[i].compbuf) { - free_page((unsigned long) ov->frame[i].compbuf); - ov->frame[i].compbuf = NULL; - } - } - - PDEBUG(4, "buffer memory deallocated"); - ov->buf_state = BUF_NOT_ALLOCATED; - PDEBUG(4, "leaving"); -} - -static int -ov51x_alloc(struct usb_ov511 *ov) -{ - int i; - const int w = ov->maxwidth; - const int h = ov->maxheight; - const int data_bufsize = OV511_NUMFRAMES * MAX_DATA_SIZE(w, h); - const int raw_bufsize = OV511_NUMFRAMES * MAX_RAW_DATA_SIZE(w, h); - - PDEBUG(4, "entered"); - mutex_lock(&ov->buf_lock); - - if (ov->buf_state == BUF_ALLOCATED) - goto out; - - ov->fbuf = rvmalloc(data_bufsize); - if (!ov->fbuf) - goto error; - - ov->rawfbuf = vmalloc(raw_bufsize); - if (!ov->rawfbuf) - goto error; - - memset(ov->rawfbuf, 0, raw_bufsize); - - ov->tempfbuf = vmalloc(raw_bufsize); - if (!ov->tempfbuf) - goto error; - - memset(ov->tempfbuf, 0, raw_bufsize); - - for (i = 0; i < OV511_NUMSBUF; i++) { - ov->sbuf[i].data = kmalloc(FRAMES_PER_DESC * - MAX_FRAME_SIZE_PER_DESC, GFP_KERNEL); - if (!ov->sbuf[i].data) - goto error; - - PDEBUG(4, "sbuf[%d] @ %p", i, ov->sbuf[i].data); - } - - for (i = 0; i < OV511_NUMFRAMES; i++) { - ov->frame[i].data = ov->fbuf + i * MAX_DATA_SIZE(w, h); - ov->frame[i].rawdata = ov->rawfbuf - + i * MAX_RAW_DATA_SIZE(w, h); - ov->frame[i].tempdata = ov->tempfbuf - + i * MAX_RAW_DATA_SIZE(w, h); - - ov->frame[i].compbuf = - (unsigned char *) __get_free_page(GFP_KERNEL); - if (!ov->frame[i].compbuf) - goto error; - - PDEBUG(4, "frame[%d] @ %p", i, ov->frame[i].data); - } - - ov->buf_state = BUF_ALLOCATED; -out: - mutex_unlock(&ov->buf_lock); - PDEBUG(4, "leaving"); - return 0; -error: - ov51x_do_dealloc(ov); - mutex_unlock(&ov->buf_lock); - PDEBUG(4, "errored"); - return -ENOMEM; -} - -static void -ov51x_dealloc(struct usb_ov511 *ov) -{ - PDEBUG(4, "entered"); - mutex_lock(&ov->buf_lock); - ov51x_do_dealloc(ov); - mutex_unlock(&ov->buf_lock); - PDEBUG(4, "leaving"); -} - -/**************************************************************************** - * - * V4L 1 API - * - ***************************************************************************/ - -static int -ov51x_v4l1_open(struct file *file) -{ - struct video_device *vdev = video_devdata(file); - struct usb_ov511 *ov = video_get_drvdata(vdev); - int err, i; - - PDEBUG(4, "opening"); - - mutex_lock(&ov->lock); - - err = -EBUSY; - if (ov->user) - goto out; - - ov->sub_flag = 0; - - /* In case app doesn't set them... */ - err = ov51x_set_default_params(ov); - if (err < 0) - goto out; - - /* Make sure frames are reset */ - for (i = 0; i < OV511_NUMFRAMES; i++) { - ov->frame[i].grabstate = FRAME_UNUSED; - ov->frame[i].bytes_read = 0; - } - - /* If compression is on, make sure now that a - * decompressor can be loaded */ - if (ov->compress && !ov->decomp_ops) { - err = request_decompressor(ov); - if (err && !dumppix) - goto out; - } - - err = ov51x_alloc(ov); - if (err < 0) - goto out; - - err = ov51x_init_isoc(ov); - if (err) { - ov51x_dealloc(ov); - goto out; - } - - ov->user++; - file->private_data = vdev; - - if (ov->led_policy == LED_AUTO) - ov51x_led_control(ov, 1); - -out: - mutex_unlock(&ov->lock); - return err; -} - -static int -ov51x_v4l1_close(struct file *file) -{ - struct video_device *vdev = file->private_data; - struct usb_ov511 *ov = video_get_drvdata(vdev); - - PDEBUG(4, "ov511_close"); - - mutex_lock(&ov->lock); - - ov->user--; - ov51x_stop_isoc(ov); - - if (ov->led_policy == LED_AUTO) - ov51x_led_control(ov, 0); - - if (ov->dev) - ov51x_dealloc(ov); - - mutex_unlock(&ov->lock); - - /* Device unplugged while open. Only a minimum of unregistration is done - * here; the disconnect callback already did the rest. */ - if (!ov->dev) { - mutex_lock(&ov->cbuf_lock); - kfree(ov->cbuf); - ov->cbuf = NULL; - mutex_unlock(&ov->cbuf_lock); - - ov51x_dealloc(ov); - kfree(ov); - ov = NULL; - } - - file->private_data = NULL; - return 0; -} - -/* Do not call this function directly! */ -static long -ov51x_v4l1_ioctl_internal(struct file *file, unsigned int cmd, void *arg) -{ - struct video_device *vdev = file->private_data; - struct usb_ov511 *ov = video_get_drvdata(vdev); - PDEBUG(5, "IOCtl: 0x%X", cmd); - - if (!ov->dev) - return -EIO; - - switch (cmd) { - case VIDIOCGCAP: - { - struct video_capability *b = arg; - - PDEBUG(4, "VIDIOCGCAP"); - - memset(b, 0, sizeof(struct video_capability)); - sprintf(b->name, "%s USB Camera", - symbolic(brglist, ov->bridge)); - b->type = VID_TYPE_CAPTURE | VID_TYPE_SUBCAPTURE; - b->channels = ov->num_inputs; - b->audios = 0; - b->maxwidth = ov->maxwidth; - b->maxheight = ov->maxheight; - b->minwidth = ov->minwidth; - b->minheight = ov->minheight; - - return 0; - } - case VIDIOCGCHAN: - { - struct video_channel *v = arg; - - PDEBUG(4, "VIDIOCGCHAN"); - - if ((unsigned)(v->channel) >= ov->num_inputs) { - err("Invalid channel (%d)", v->channel); - return -EINVAL; - } - - v->norm = ov->norm; - v->type = VIDEO_TYPE_CAMERA; - v->flags = 0; -// v->flags |= (ov->has_decoder) ? VIDEO_VC_NORM : 0; - v->tuners = 0; - decoder_get_input_name(ov, v->channel, v->name); - - return 0; - } - case VIDIOCSCHAN: - { - struct video_channel *v = arg; - int err; - - PDEBUG(4, "VIDIOCSCHAN"); - - /* Make sure it's not a camera */ - if (!ov->has_decoder) { - if (v->channel == 0) - return 0; - else - return -EINVAL; - } - - if (v->norm != VIDEO_MODE_PAL && - v->norm != VIDEO_MODE_NTSC && - v->norm != VIDEO_MODE_SECAM && - v->norm != VIDEO_MODE_AUTO) { - err("Invalid norm (%d)", v->norm); - return -EINVAL; - } - - if ((unsigned)(v->channel) >= ov->num_inputs) { - err("Invalid channel (%d)", v->channel); - return -EINVAL; - } - - err = decoder_set_input(ov, v->channel); - if (err) - return err; - - err = decoder_set_norm(ov, v->norm); - if (err) - return err; - - return 0; - } - case VIDIOCGPICT: - { - struct video_picture *p = arg; - - PDEBUG(4, "VIDIOCGPICT"); - - memset(p, 0, sizeof(struct video_picture)); - if (sensor_get_picture(ov, p)) - return -EIO; - - /* Can we get these from frame[0]? -claudio? */ - p->depth = ov->frame[0].depth; - p->palette = ov->frame[0].format; - - return 0; - } - case VIDIOCSPICT: - { - struct video_picture *p = arg; - int i, rc; - - PDEBUG(4, "VIDIOCSPICT"); - - if (!get_depth(p->palette)) - return -EINVAL; - - if (sensor_set_picture(ov, p)) - return -EIO; - - if (force_palette && p->palette != force_palette) { - dev_info(&ov->dev->dev, "Palette rejected (%s)\n", - symbolic(v4l1_plist, p->palette)); - return -EINVAL; - } - - // FIXME: Format should be independent of frames - if (p->palette != ov->frame[0].format) { - PDEBUG(4, "Detected format change"); - - rc = ov51x_wait_frames_inactive(ov); - if (rc) - return rc; - - mode_init_regs(ov, ov->frame[0].width, - ov->frame[0].height, p->palette, ov->sub_flag); - } - - PDEBUG(4, "Setting depth=%d, palette=%s", - p->depth, symbolic(v4l1_plist, p->palette)); - - for (i = 0; i < OV511_NUMFRAMES; i++) { - ov->frame[i].depth = p->depth; - ov->frame[i].format = p->palette; - } - - return 0; - } - case VIDIOCGCAPTURE: - { - int *vf = arg; - - PDEBUG(4, "VIDIOCGCAPTURE"); - - ov->sub_flag = *vf; - return 0; - } - case VIDIOCSCAPTURE: - { - struct video_capture *vc = arg; - - PDEBUG(4, "VIDIOCSCAPTURE"); - - if (vc->flags) - return -EINVAL; - if (vc->decimation) - return -EINVAL; - - vc->x &= ~3L; - vc->y &= ~1L; - vc->y &= ~31L; - - if (vc->width == 0) - vc->width = 32; - - vc->height /= 16; - vc->height *= 16; - if (vc->height == 0) - vc->height = 16; - - ov->subx = vc->x; - ov->suby = vc->y; - ov->subw = vc->width; - ov->subh = vc->height; - - return 0; - } - case VIDIOCSWIN: - { - struct video_window *vw = arg; - int i, rc; - - PDEBUG(4, "VIDIOCSWIN: %dx%d", vw->width, vw->height); - -#if 0 - if (vw->flags) - return -EINVAL; - if (vw->clipcount) - return -EINVAL; - if (vw->height != ov->maxheight) - return -EINVAL; - if (vw->width != ov->maxwidth) - return -EINVAL; -#endif - - rc = ov51x_wait_frames_inactive(ov); - if (rc) - return rc; - - rc = mode_init_regs(ov, vw->width, vw->height, - ov->frame[0].format, ov->sub_flag); - if (rc < 0) - return rc; - - for (i = 0; i < OV511_NUMFRAMES; i++) { - ov->frame[i].width = vw->width; - ov->frame[i].height = vw->height; - } - - return 0; - } - case VIDIOCGWIN: - { - struct video_window *vw = arg; - - memset(vw, 0, sizeof(struct video_window)); - vw->x = 0; /* FIXME */ - vw->y = 0; - vw->width = ov->frame[0].width; - vw->height = ov->frame[0].height; - vw->flags = 30; - - PDEBUG(4, "VIDIOCGWIN: %dx%d", vw->width, vw->height); - - return 0; - } - case VIDIOCGMBUF: - { - struct video_mbuf *vm = arg; - int i; - - PDEBUG(4, "VIDIOCGMBUF"); - - memset(vm, 0, sizeof(struct video_mbuf)); - vm->size = OV511_NUMFRAMES - * MAX_DATA_SIZE(ov->maxwidth, ov->maxheight); - vm->frames = OV511_NUMFRAMES; - - vm->offsets[0] = 0; - for (i = 1; i < OV511_NUMFRAMES; i++) { - vm->offsets[i] = vm->offsets[i-1] - + MAX_DATA_SIZE(ov->maxwidth, ov->maxheight); - } - - return 0; - } - case VIDIOCMCAPTURE: - { - struct video_mmap *vm = arg; - int rc, depth; - unsigned int f = vm->frame; - - PDEBUG(4, "VIDIOCMCAPTURE: frame: %d, %dx%d, %s", f, vm->width, - vm->height, symbolic(v4l1_plist, vm->format)); - - depth = get_depth(vm->format); - if (!depth) { - PDEBUG(2, "VIDIOCMCAPTURE: invalid format (%s)", - symbolic(v4l1_plist, vm->format)); - return -EINVAL; - } - - if (f >= OV511_NUMFRAMES) { - err("VIDIOCMCAPTURE: invalid frame (%d)", f); - return -EINVAL; - } - - if (vm->width > ov->maxwidth - || vm->height > ov->maxheight) { - err("VIDIOCMCAPTURE: requested dimensions too big"); - return -EINVAL; - } - - if (ov->frame[f].grabstate == FRAME_GRABBING) { - PDEBUG(4, "VIDIOCMCAPTURE: already grabbing"); - return -EBUSY; - } - - if (force_palette && (vm->format != force_palette)) { - PDEBUG(2, "palette rejected (%s)", - symbolic(v4l1_plist, vm->format)); - return -EINVAL; - } - - if ((ov->frame[f].width != vm->width) || - (ov->frame[f].height != vm->height) || - (ov->frame[f].format != vm->format) || - (ov->frame[f].sub_flag != ov->sub_flag) || - (ov->frame[f].depth != depth)) { - PDEBUG(4, "VIDIOCMCAPTURE: change in image parameters"); - - rc = ov51x_wait_frames_inactive(ov); - if (rc) - return rc; - - rc = mode_init_regs(ov, vm->width, vm->height, - vm->format, ov->sub_flag); -#if 0 - if (rc < 0) { - PDEBUG(1, "Got error while initializing regs "); - return ret; - } -#endif - ov->frame[f].width = vm->width; - ov->frame[f].height = vm->height; - ov->frame[f].format = vm->format; - ov->frame[f].sub_flag = ov->sub_flag; - ov->frame[f].depth = depth; - } - - /* Mark it as ready */ - ov->frame[f].grabstate = FRAME_READY; - - PDEBUG(4, "VIDIOCMCAPTURE: renewing frame %d", f); - - return ov51x_new_frame(ov, f); - } - case VIDIOCSYNC: - { - unsigned int fnum = *((unsigned int *) arg); - struct ov511_frame *frame; - int rc; - - if (fnum >= OV511_NUMFRAMES) { - err("VIDIOCSYNC: invalid frame (%d)", fnum); - return -EINVAL; - } - - frame = &ov->frame[fnum]; - - PDEBUG(4, "syncing to frame %d, grabstate = %d", fnum, - frame->grabstate); - - switch (frame->grabstate) { - case FRAME_UNUSED: - return -EINVAL; - case FRAME_READY: - case FRAME_GRABBING: - case FRAME_ERROR: -redo: - if (!ov->dev) - return -EIO; - - rc = wait_event_interruptible(frame->wq, - (frame->grabstate == FRAME_DONE) - || (frame->grabstate == FRAME_ERROR)); - - if (rc) - return rc; - - if (frame->grabstate == FRAME_ERROR) { - if ((rc = ov51x_new_frame(ov, fnum)) < 0) - return rc; - goto redo; - } - /* Fall through */ - case FRAME_DONE: - if (ov->snap_enabled && !frame->snapshot) { - if ((rc = ov51x_new_frame(ov, fnum)) < 0) - return rc; - goto redo; - } - - frame->grabstate = FRAME_UNUSED; - - /* Reset the hardware snapshot button */ - /* FIXME - Is this the best place for this? */ - if ((ov->snap_enabled) && (frame->snapshot)) { - frame->snapshot = 0; - ov51x_clear_snapshot(ov); - } - - /* Decompression, format conversion, etc... */ - ov51x_postprocess(ov, frame); - - break; - } /* end switch */ - - return 0; - } - case VIDIOCGFBUF: - { - struct video_buffer *vb = arg; - - PDEBUG(4, "VIDIOCGFBUF"); - - memset(vb, 0, sizeof(struct video_buffer)); - - return 0; - } - case VIDIOCGUNIT: - { - struct video_unit *vu = arg; - - PDEBUG(4, "VIDIOCGUNIT"); - - memset(vu, 0, sizeof(struct video_unit)); - - vu->video = ov->vdev->minor; - vu->vbi = VIDEO_NO_UNIT; - vu->radio = VIDEO_NO_UNIT; - vu->audio = VIDEO_NO_UNIT; - vu->teletext = VIDEO_NO_UNIT; - - return 0; - } - case OV511IOC_WI2C: - { - struct ov511_i2c_struct *w = arg; - - return i2c_w_slave(ov, w->slave, w->reg, w->value, w->mask); - } - case OV511IOC_RI2C: - { - struct ov511_i2c_struct *r = arg; - int rc; - - rc = i2c_r_slave(ov, r->slave, r->reg); - if (rc < 0) - return rc; - - r->value = rc; - return 0; - } - default: - PDEBUG(3, "Unsupported IOCtl: 0x%X", cmd); - return -ENOIOCTLCMD; - } /* end switch */ - - return 0; -} - -static long -ov51x_v4l1_ioctl(struct file *file, - unsigned int cmd, unsigned long arg) -{ - struct video_device *vdev = file->private_data; - struct usb_ov511 *ov = video_get_drvdata(vdev); - int rc; - - if (mutex_lock_interruptible(&ov->lock)) - return -EINTR; - - rc = video_usercopy(file, cmd, arg, ov51x_v4l1_ioctl_internal); - - mutex_unlock(&ov->lock); - return rc; -} - -static ssize_t -ov51x_v4l1_read(struct file *file, char __user *buf, size_t cnt, loff_t *ppos) -{ - struct video_device *vdev = file->private_data; - int noblock = file->f_flags&O_NONBLOCK; - unsigned long count = cnt; - struct usb_ov511 *ov = video_get_drvdata(vdev); - int i, rc = 0, frmx = -1; - struct ov511_frame *frame; - - if (mutex_lock_interruptible(&ov->lock)) - return -EINTR; - - PDEBUG(4, "%ld bytes, noblock=%d", count, noblock); - - if (!vdev || !buf) { - rc = -EFAULT; - goto error; - } - - if (!ov->dev) { - rc = -EIO; - goto error; - } - -// FIXME: Only supports two frames - /* See if a frame is completed, then use it. */ - if (ov->frame[0].grabstate >= FRAME_DONE) /* _DONE or _ERROR */ - frmx = 0; - else if (ov->frame[1].grabstate >= FRAME_DONE)/* _DONE or _ERROR */ - frmx = 1; - - /* If nonblocking we return immediately */ - if (noblock && (frmx == -1)) { - rc = -EAGAIN; - goto error; - } - - /* If no FRAME_DONE, look for a FRAME_GRABBING state. */ - /* See if a frame is in process (grabbing), then use it. */ - if (frmx == -1) { - if (ov->frame[0].grabstate == FRAME_GRABBING) - frmx = 0; - else if (ov->frame[1].grabstate == FRAME_GRABBING) - frmx = 1; - } - - /* If no frame is active, start one. */ - if (frmx == -1) { - if ((rc = ov51x_new_frame(ov, frmx = 0))) { - err("read: ov51x_new_frame error"); - goto error; - } - } - - frame = &ov->frame[frmx]; - -restart: - if (!ov->dev) { - rc = -EIO; - goto error; - } - - /* Wait while we're grabbing the image */ - PDEBUG(4, "Waiting image grabbing"); - rc = wait_event_interruptible(frame->wq, - (frame->grabstate == FRAME_DONE) - || (frame->grabstate == FRAME_ERROR)); - - if (rc) - goto error; - - PDEBUG(4, "Got image, frame->grabstate = %d", frame->grabstate); - PDEBUG(4, "bytes_recvd = %d", frame->bytes_recvd); - - if (frame->grabstate == FRAME_ERROR) { - frame->bytes_read = 0; - err("** ick! ** Errored frame %d", ov->curframe); - if (ov51x_new_frame(ov, frmx)) { - err("read: ov51x_new_frame error"); - goto error; - } - goto restart; - } - - - /* Repeat until we get a snapshot frame */ - if (ov->snap_enabled) - PDEBUG(4, "Waiting snapshot frame"); - if (ov->snap_enabled && !frame->snapshot) { - frame->bytes_read = 0; - if ((rc = ov51x_new_frame(ov, frmx))) { - err("read: ov51x_new_frame error"); - goto error; - } - goto restart; - } - - /* Clear the snapshot */ - if (ov->snap_enabled && frame->snapshot) { - frame->snapshot = 0; - ov51x_clear_snapshot(ov); - } - - /* Decompression, format conversion, etc... */ - ov51x_postprocess(ov, frame); - - PDEBUG(4, "frmx=%d, bytes_read=%ld, length=%ld", frmx, - frame->bytes_read, - get_frame_length(frame)); - - /* copy bytes to user space; we allow for partials reads */ -// if ((count + frame->bytes_read) -// > get_frame_length((struct ov511_frame *)frame)) -// count = frame->scanlength - frame->bytes_read; - - /* FIXME - count hardwired to be one frame... */ - count = get_frame_length(frame); - - PDEBUG(4, "Copy to user space: %ld bytes", count); - if ((i = copy_to_user(buf, frame->data + frame->bytes_read, count))) { - PDEBUG(4, "Copy failed! %d bytes not copied", i); - rc = -EFAULT; - goto error; - } - - frame->bytes_read += count; - PDEBUG(4, "{copy} count used=%ld, new bytes_read=%ld", - count, frame->bytes_read); - - /* If all data have been read... */ - if (frame->bytes_read - >= get_frame_length(frame)) { - frame->bytes_read = 0; - -// FIXME: Only supports two frames - /* Mark it as available to be used again. */ - ov->frame[frmx].grabstate = FRAME_UNUSED; - if ((rc = ov51x_new_frame(ov, !frmx))) { - err("ov51x_new_frame returned error"); - goto error; - } - } - - PDEBUG(4, "read finished, returning %ld (sweet)", count); - - mutex_unlock(&ov->lock); - return count; - -error: - mutex_unlock(&ov->lock); - return rc; -} - -static int -ov51x_v4l1_mmap(struct file *file, struct vm_area_struct *vma) -{ - struct video_device *vdev = file->private_data; - unsigned long start = vma->vm_start; - unsigned long size = vma->vm_end - vma->vm_start; - struct usb_ov511 *ov = video_get_drvdata(vdev); - unsigned long page, pos; - - if (ov->dev == NULL) - return -EIO; - - PDEBUG(4, "mmap: %ld (%lX) bytes", size, size); - - if (size > (((OV511_NUMFRAMES - * MAX_DATA_SIZE(ov->maxwidth, ov->maxheight) - + PAGE_SIZE - 1) & ~(PAGE_SIZE - 1)))) - return -EINVAL; - - if (mutex_lock_interruptible(&ov->lock)) - return -EINTR; - - pos = (unsigned long)ov->fbuf; - while (size > 0) { - page = vmalloc_to_pfn((void *)pos); - if (remap_pfn_range(vma, start, page, PAGE_SIZE, PAGE_SHARED)) { - mutex_unlock(&ov->lock); - return -EAGAIN; - } - start += PAGE_SIZE; - pos += PAGE_SIZE; - if (size > PAGE_SIZE) - size -= PAGE_SIZE; - else - size = 0; - } - - mutex_unlock(&ov->lock); - return 0; -} - -static const struct v4l2_file_operations ov511_fops = { - .owner = THIS_MODULE, - .open = ov51x_v4l1_open, - .release = ov51x_v4l1_close, - .read = ov51x_v4l1_read, - .mmap = ov51x_v4l1_mmap, - .ioctl = ov51x_v4l1_ioctl, -}; - -static struct video_device vdev_template = { - .name = "OV511 USB Camera", - .fops = &ov511_fops, - .release = video_device_release, -}; - -/**************************************************************************** - * - * OV511 and sensor configuration - * - ***************************************************************************/ - -/* This initializes the OV7610, OV7620, or OV76BE sensor. The OV76BE uses - * the same register settings as the OV7610, since they are very similar. - */ -static int -ov7xx0_configure(struct usb_ov511 *ov) -{ - int i, success; - int rc; - - /* Lawrence Glaister <lg@jfm.bc.ca> reports: - * - * Register 0x0f in the 7610 has the following effects: - * - * 0x85 (AEC method 1): Best overall, good contrast range - * 0x45 (AEC method 2): Very overexposed - * 0xa5 (spec sheet default): Ok, but the black level is - * shifted resulting in loss of contrast - * 0x05 (old driver setting): very overexposed, too much - * contrast - */ - static struct ov511_regvals aRegvalsNorm7610[] = { - { OV511_I2C_BUS, 0x10, 0xff }, - { OV511_I2C_BUS, 0x16, 0x06 }, - { OV511_I2C_BUS, 0x28, 0x24 }, - { OV511_I2C_BUS, 0x2b, 0xac }, - { OV511_I2C_BUS, 0x12, 0x00 }, - { OV511_I2C_BUS, 0x38, 0x81 }, - { OV511_I2C_BUS, 0x28, 0x24 }, /* 0c */ - { OV511_I2C_BUS, 0x0f, 0x85 }, /* lg's setting */ - { OV511_I2C_BUS, 0x15, 0x01 }, - { OV511_I2C_BUS, 0x20, 0x1c }, - { OV511_I2C_BUS, 0x23, 0x2a }, - { OV511_I2C_BUS, 0x24, 0x10 }, - { OV511_I2C_BUS, 0x25, 0x8a }, - { OV511_I2C_BUS, 0x26, 0xa2 }, - { OV511_I2C_BUS, 0x27, 0xc2 }, - { OV511_I2C_BUS, 0x2a, 0x04 }, - { OV511_I2C_BUS, 0x2c, 0xfe }, - { OV511_I2C_BUS, 0x2d, 0x93 }, - { OV511_I2C_BUS, 0x30, 0x71 }, - { OV511_I2C_BUS, 0x31, 0x60 }, - { OV511_I2C_BUS, 0x32, 0x26 }, - { OV511_I2C_BUS, 0x33, 0x20 }, - { OV511_I2C_BUS, 0x34, 0x48 }, - { OV511_I2C_BUS, 0x12, 0x24 }, - { OV511_I2C_BUS, 0x11, 0x01 }, - { OV511_I2C_BUS, 0x0c, 0x24 }, - { OV511_I2C_BUS, 0x0d, 0x24 }, - { OV511_DONE_BUS, 0x0, 0x00 }, - }; - - static struct ov511_regvals aRegvalsNorm7620[] = { - { OV511_I2C_BUS, 0x00, 0x00 }, - { OV511_I2C_BUS, 0x01, 0x80 }, - { OV511_I2C_BUS, 0x02, 0x80 }, - { OV511_I2C_BUS, 0x03, 0xc0 }, - { OV511_I2C_BUS, 0x06, 0x60 }, - { OV511_I2C_BUS, 0x07, 0x00 }, - { OV511_I2C_BUS, 0x0c, 0x24 }, - { OV511_I2C_BUS, 0x0c, 0x24 }, - { OV511_I2C_BUS, 0x0d, 0x24 }, - { OV511_I2C_BUS, 0x11, 0x01 }, - { OV511_I2C_BUS, 0x12, 0x24 }, - { OV511_I2C_BUS, 0x13, 0x01 }, - { OV511_I2C_BUS, 0x14, 0x84 }, - { OV511_I2C_BUS, 0x15, 0x01 }, - { OV511_I2C_BUS, 0x16, 0x03 }, - { OV511_I2C_BUS, 0x17, 0x2f }, - { OV511_I2C_BUS, 0x18, 0xcf }, - { OV511_I2C_BUS, 0x19, 0x06 }, - { OV511_I2C_BUS, 0x1a, 0xf5 }, - { OV511_I2C_BUS, 0x1b, 0x00 }, - { OV511_I2C_BUS, 0x20, 0x18 }, - { OV511_I2C_BUS, 0x21, 0x80 }, - { OV511_I2C_BUS, 0x22, 0x80 }, - { OV511_I2C_BUS, 0x23, 0x00 }, - { OV511_I2C_BUS, 0x26, 0xa2 }, - { OV511_I2C_BUS, 0x27, 0xea }, - { OV511_I2C_BUS, 0x28, 0x20 }, - { OV511_I2C_BUS, 0x29, 0x00 }, - { OV511_I2C_BUS, 0x2a, 0x10 }, - { OV511_I2C_BUS, 0x2b, 0x00 }, - { OV511_I2C_BUS, 0x2c, 0x88 }, - { OV511_I2C_BUS, 0x2d, 0x91 }, - { OV511_I2C_BUS, 0x2e, 0x80 }, - { OV511_I2C_BUS, 0x2f, 0x44 }, - { OV511_I2C_BUS, 0x60, 0x27 }, - { OV511_I2C_BUS, 0x61, 0x02 }, - { OV511_I2C_BUS, 0x62, 0x5f }, - { OV511_I2C_BUS, 0x63, 0xd5 }, - { OV511_I2C_BUS, 0x64, 0x57 }, - { OV511_I2C_BUS, 0x65, 0x83 }, - { OV511_I2C_BUS, 0x66, 0x55 }, - { OV511_I2C_BUS, 0x67, 0x92 }, - { OV511_I2C_BUS, 0x68, 0xcf }, - { OV511_I2C_BUS, 0x69, 0x76 }, - { OV511_I2C_BUS, 0x6a, 0x22 }, - { OV511_I2C_BUS, 0x6b, 0x00 }, - { OV511_I2C_BUS, 0x6c, 0x02 }, - { OV511_I2C_BUS, 0x6d, 0x44 }, - { OV511_I2C_BUS, 0x6e, 0x80 }, - { OV511_I2C_BUS, 0x6f, 0x1d }, - { OV511_I2C_BUS, 0x70, 0x8b }, - { OV511_I2C_BUS, 0x71, 0x00 }, - { OV511_I2C_BUS, 0x72, 0x14 }, - { OV511_I2C_BUS, 0x73, 0x54 }, - { OV511_I2C_BUS, 0x74, 0x00 }, - { OV511_I2C_BUS, 0x75, 0x8e }, - { OV511_I2C_BUS, 0x76, 0x00 }, - { OV511_I2C_BUS, 0x77, 0xff }, - { OV511_I2C_BUS, 0x78, 0x80 }, - { OV511_I2C_BUS, 0x79, 0x80 }, - { OV511_I2C_BUS, 0x7a, 0x80 }, - { OV511_I2C_BUS, 0x7b, 0xe2 }, - { OV511_I2C_BUS, 0x7c, 0x00 }, - { OV511_DONE_BUS, 0x0, 0x00 }, - }; - - PDEBUG(4, "starting configuration"); - - /* This looks redundant, but is necessary for WebCam 3 */ - ov->primary_i2c_slave = OV7xx0_SID; - if (ov51x_set_slave_ids(ov, OV7xx0_SID) < 0) - return -1; - - if (init_ov_sensor(ov) >= 0) { - PDEBUG(1, "OV7xx0 sensor initalized (method 1)"); - } else { - /* Reset the 76xx */ - if (i2c_w(ov, 0x12, 0x80) < 0) - return -1; - - /* Wait for it to initialize */ - msleep(150); - - i = 0; - success = 0; - while (i <= i2c_detect_tries) { - if ((i2c_r(ov, OV7610_REG_ID_HIGH) == 0x7F) && - (i2c_r(ov, OV7610_REG_ID_LOW) == 0xA2)) { - success = 1; - break; - } else { - i++; - } - } - -// Was (i == i2c_detect_tries) previously. This obviously used to always report -// success. Whether anyone actually depended on that bug is unknown - if ((i >= i2c_detect_tries) && (success == 0)) { - err("Failed to read sensor ID. You might not have an"); - err("OV7610/20, or it may be not responding. Report"); - err("this to " EMAIL); - err("This is only a warning. You can attempt to use"); - err("your camera anyway"); -// Only issue a warning for now -// return -1; - } else { - PDEBUG(1, "OV7xx0 initialized (method 2, %dx)", i+1); - } - } - - /* Detect sensor (sub)type */ - rc = i2c_r(ov, OV7610_REG_COM_I); - - if (rc < 0) { - err("Error detecting sensor type"); - return -1; - } else if ((rc & 3) == 3) { - dev_info(&ov->dev->dev, "Sensor is an OV7610\n"); - ov->sensor = SEN_OV7610; - } else if ((rc & 3) == 1) { - /* I don't know what's different about the 76BE yet. */ - if (i2c_r(ov, 0x15) & 1) - dev_info(&ov->dev->dev, "Sensor is an OV7620AE\n"); - else - dev_info(&ov->dev->dev, "Sensor is an OV76BE\n"); - - /* OV511+ will return all zero isoc data unless we - * configure the sensor as a 7620. Someone needs to - * find the exact reg. setting that causes this. */ - if (ov->bridge == BRG_OV511PLUS) { - dev_info(&ov->dev->dev, - "Enabling 511+/7620AE workaround\n"); - ov->sensor = SEN_OV7620; - } else { - ov->sensor = SEN_OV76BE; - } - } else if ((rc & 3) == 0) { - dev_info(&ov->dev->dev, "Sensor is an OV7620\n"); - ov->sensor = SEN_OV7620; - } else { - err("Unknown image sensor version: %d", rc & 3); - return -1; - } - - if (ov->sensor == SEN_OV7620) { - PDEBUG(4, "Writing 7620 registers"); - if (write_regvals(ov, aRegvalsNorm7620)) - return -1; - } else { - PDEBUG(4, "Writing 7610 registers"); - if (write_regvals(ov, aRegvalsNorm7610)) - return -1; - } - - /* Set sensor-specific vars */ - ov->maxwidth = 640; - ov->maxheight = 480; - ov->minwidth = 64; - ov->minheight = 48; - - // FIXME: These do not match the actual settings yet - ov->brightness = 0x80 << 8; - ov->contrast = 0x80 << 8; - ov->colour = 0x80 << 8; - ov->hue = 0x80 << 8; - - return 0; -} - -/* This initializes the OV6620, OV6630, OV6630AE, or OV6630AF sensor. */ -static int -ov6xx0_configure(struct usb_ov511 *ov) -{ - int rc; - - static struct ov511_regvals aRegvalsNorm6x20[] = { - { OV511_I2C_BUS, 0x12, 0x80 }, /* reset */ - { OV511_I2C_BUS, 0x11, 0x01 }, - { OV511_I2C_BUS, 0x03, 0x60 }, - { OV511_I2C_BUS, 0x05, 0x7f }, /* For when autoadjust is off */ - { OV511_I2C_BUS, 0x07, 0xa8 }, - /* The ratio of 0x0c and 0x0d controls the white point */ - { OV511_I2C_BUS, 0x0c, 0x24 }, - { OV511_I2C_BUS, 0x0d, 0x24 }, - { OV511_I2C_BUS, 0x0f, 0x15 }, /* COMS */ - { OV511_I2C_BUS, 0x10, 0x75 }, /* AEC Exposure time */ - { OV511_I2C_BUS, 0x12, 0x24 }, /* Enable AGC */ - { OV511_I2C_BUS, 0x14, 0x04 }, - /* 0x16: 0x06 helps frame stability with moving objects */ - { OV511_I2C_BUS, 0x16, 0x06 }, -// { OV511_I2C_BUS, 0x20, 0x30 }, /* Aperture correction enable */ - { OV511_I2C_BUS, 0x26, 0xb2 }, /* BLC enable */ - /* 0x28: 0x05 Selects RGB format if RGB on */ - { OV511_I2C_BUS, 0x28, 0x05 }, - { OV511_I2C_BUS, 0x2a, 0x04 }, /* Disable framerate adjust */ -// { OV511_I2C_BUS, 0x2b, 0xac }, /* Framerate; Set 2a[7] first */ - { OV511_I2C_BUS, 0x2d, 0x99 }, - { OV511_I2C_BUS, 0x33, 0xa0 }, /* Color Processing Parameter */ - { OV511_I2C_BUS, 0x34, 0xd2 }, /* Max A/D range */ - { OV511_I2C_BUS, 0x38, 0x8b }, - { OV511_I2C_BUS, 0x39, 0x40 }, - - { OV511_I2C_BUS, 0x3c, 0x39 }, /* Enable AEC mode changing */ - { OV511_I2C_BUS, 0x3c, 0x3c }, /* Change AEC mode */ - { OV511_I2C_BUS, 0x3c, 0x24 }, /* Disable AEC mode changing */ - - { OV511_I2C_BUS, 0x3d, 0x80 }, - /* These next two registers (0x4a, 0x4b) are undocumented. They - * control the color balance */ - { OV511_I2C_BUS, 0x4a, 0x80 }, - { OV511_I2C_BUS, 0x4b, 0x80 }, - { OV511_I2C_BUS, 0x4d, 0xd2 }, /* This reduces noise a bit */ - { OV511_I2C_BUS, 0x4e, 0xc1 }, - { OV511_I2C_BUS, 0x4f, 0x04 }, -// Do 50-53 have any effect? -// Toggle 0x12[2] off and on here? - { OV511_DONE_BUS, 0x0, 0x00 }, /* END MARKER */ - }; - - static struct ov511_regvals aRegvalsNorm6x30[] = { - /*OK*/ { OV511_I2C_BUS, 0x12, 0x80 }, /* reset */ - { OV511_I2C_BUS, 0x11, 0x00 }, - /*OK*/ { OV511_I2C_BUS, 0x03, 0x60 }, - /*0A?*/ { OV511_I2C_BUS, 0x05, 0x7f }, /* For when autoadjust is off */ - { OV511_I2C_BUS, 0x07, 0xa8 }, - /* The ratio of 0x0c and 0x0d controls the white point */ - /*OK*/ { OV511_I2C_BUS, 0x0c, 0x24 }, - /*OK*/ { OV511_I2C_BUS, 0x0d, 0x24 }, - /*A*/ { OV511_I2C_BUS, 0x0e, 0x20 }, -// /*04?*/ { OV511_I2C_BUS, 0x14, 0x80 }, - { OV511_I2C_BUS, 0x16, 0x03 }, -// /*OK*/ { OV511_I2C_BUS, 0x20, 0x30 }, /* Aperture correction enable */ - // 21 & 22? The suggested values look wrong. Go with default - /*A*/ { OV511_I2C_BUS, 0x23, 0xc0 }, - /*A*/ { OV511_I2C_BUS, 0x25, 0x9a }, // Check this against default -// /*OK*/ { OV511_I2C_BUS, 0x26, 0xb2 }, /* BLC enable */ - - /* 0x28: 0x05 Selects RGB format if RGB on */ -// /*04?*/ { OV511_I2C_BUS, 0x28, 0x05 }, -// /*04?*/ { OV511_I2C_BUS, 0x28, 0x45 }, // DEBUG: Tristate UV bus - - /*OK*/ { OV511_I2C_BUS, 0x2a, 0x04 }, /* Disable framerate adjust */ -// /*OK*/ { OV511_I2C_BUS, 0x2b, 0xac }, /* Framerate; Set 2a[7] first */ - { OV511_I2C_BUS, 0x2d, 0x99 }, -// /*A*/ { OV511_I2C_BUS, 0x33, 0x26 }, // Reserved bits on 6620 -// /*d2?*/ { OV511_I2C_BUS, 0x34, 0x03 }, /* Max A/D range */ -// /*8b?*/ { OV511_I2C_BUS, 0x38, 0x83 }, -// /*40?*/ { OV511_I2C_BUS, 0x39, 0xc0 }, // 6630 adds bit 7 -// { OV511_I2C_BUS, 0x3c, 0x39 }, /* Enable AEC mode changing */ -// { OV511_I2C_BUS, 0x3c, 0x3c }, /* Change AEC mode */ -// { OV511_I2C_BUS, 0x3c, 0x24 }, /* Disable AEC mode changing */ - { OV511_I2C_BUS, 0x3d, 0x80 }, -// /*A*/ { OV511_I2C_BUS, 0x3f, 0x0e }, - - /* These next two registers (0x4a, 0x4b) are undocumented. They - * control the color balance */ -// /*OK?*/ { OV511_I2C_BUS, 0x4a, 0x80 }, // Check these -// /*OK?*/ { OV511_I2C_BUS, 0x4b, 0x80 }, - { OV511_I2C_BUS, 0x4d, 0x10 }, /* U = 0.563u, V = 0.714v */ - /*c1?*/ { OV511_I2C_BUS, 0x4e, 0x40 }, - - /* UV average mode, color killer: strongest */ - { OV511_I2C_BUS, 0x4f, 0x07 }, - - { OV511_I2C_BUS, 0x54, 0x23 }, /* Max AGC gain: 18dB */ - { OV511_I2C_BUS, 0x57, 0x81 }, /* (default) */ - { OV511_I2C_BUS, 0x59, 0x01 }, /* AGC dark current comp: +1 */ - { OV511_I2C_BUS, 0x5a, 0x2c }, /* (undocumented) */ - { OV511_I2C_BUS, 0x5b, 0x0f }, /* AWB chrominance levels */ -// { OV511_I2C_BUS, 0x5c, 0x10 }, - { OV511_DONE_BUS, 0x0, 0x00 }, /* END MARKER */ - }; - - PDEBUG(4, "starting sensor configuration"); - - if (init_ov_sensor(ov) < 0) { - err("Failed to read sensor ID. You might not have an OV6xx0,"); - err("or it may be not responding. Report this to " EMAIL); - return -1; - } else { - PDEBUG(1, "OV6xx0 sensor detected"); - } - - /* Detect sensor (sub)type */ - rc = i2c_r(ov, OV7610_REG_COM_I); - - if (rc < 0) { - err("Error detecting sensor type"); - return -1; - } - - if ((rc & 3) == 0) { - ov->sensor = SEN_OV6630; - dev_info(&ov->dev->dev, "Sensor is an OV6630\n"); - } else if ((rc & 3) == 1) { - ov->sensor = SEN_OV6620; - dev_info(&ov->dev->dev, "Sensor is an OV6620\n"); - } else if ((rc & 3) == 2) { - ov->sensor = SEN_OV6630; - dev_info(&ov->dev->dev, "Sensor is an OV6630AE\n"); - } else if ((rc & 3) == 3) { - ov->sensor = SEN_OV6630; - dev_info(&ov->dev->dev, "Sensor is an OV6630AF\n"); - } - - /* Set sensor-specific vars */ - ov->maxwidth = 352; - ov->maxheight = 288; - ov->minwidth = 64; - ov->minheight = 48; - - // FIXME: These do not match the actual settings yet - ov->brightness = 0x80 << 8; - ov->contrast = 0x80 << 8; - ov->colour = 0x80 << 8; - ov->hue = 0x80 << 8; - - if (ov->sensor == SEN_OV6620) { - PDEBUG(4, "Writing 6x20 registers"); - if (write_regvals(ov, aRegvalsNorm6x20)) - return -1; - } else { - PDEBUG(4, "Writing 6x30 registers"); - if (write_regvals(ov, aRegvalsNorm6x30)) - return -1; - } - - return 0; -} - -/* This initializes the KS0127 and KS0127B video decoders. */ -static int -ks0127_configure(struct usb_ov511 *ov) -{ - int rc; - -// FIXME: I don't know how to sync or reset it yet -#if 0 - if (ov51x_init_ks_sensor(ov) < 0) { - err("Failed to initialize the KS0127"); - return -1; - } else { - PDEBUG(1, "KS012x(B) sensor detected"); - } -#endif - - /* Detect decoder subtype */ - rc = i2c_r(ov, 0x00); - if (rc < 0) { - err("Error detecting sensor type"); - return -1; - } else if (rc & 0x08) { - rc = i2c_r(ov, 0x3d); - if (rc < 0) { - err("Error detecting sensor type"); - return -1; - } else if ((rc & 0x0f) == 0) { - dev_info(&ov->dev->dev, "Sensor is a KS0127\n"); - ov->sensor = SEN_KS0127; - } else if ((rc & 0x0f) == 9) { - dev_info(&ov->dev->dev, "Sensor is a KS0127B Rev. A\n"); - ov->sensor = SEN_KS0127B; - } - } else { - err("Error: Sensor is an unsupported KS0122"); - return -1; - } - - /* Set sensor-specific vars */ - ov->maxwidth = 640; - ov->maxheight = 480; - ov->minwidth = 64; - ov->minheight = 48; - - // FIXME: These do not match the actual settings yet - ov->brightness = 0x80 << 8; - ov->contrast = 0x80 << 8; - ov->colour = 0x80 << 8; - ov->hue = 0x80 << 8; - - /* This device is not supported yet. Bail out now... */ - err("This sensor is not supported yet."); - return -1; - - return 0; -} - -/* This initializes the SAA7111A video decoder. */ -static int -saa7111a_configure(struct usb_ov511 *ov) -{ - int rc; - - /* Since there is no register reset command, all registers must be - * written, otherwise gives erratic results */ - static struct ov511_regvals aRegvalsNormSAA7111A[] = { - { OV511_I2C_BUS, 0x06, 0xce }, - { OV511_I2C_BUS, 0x07, 0x00 }, - { OV511_I2C_BUS, 0x10, 0x44 }, /* YUV422, 240/286 lines */ - { OV511_I2C_BUS, 0x0e, 0x01 }, /* NTSC M or PAL BGHI */ - { OV511_I2C_BUS, 0x00, 0x00 }, - { OV511_I2C_BUS, 0x01, 0x00 }, - { OV511_I2C_BUS, 0x03, 0x23 }, - { OV511_I2C_BUS, 0x04, 0x00 }, - { OV511_I2C_BUS, 0x05, 0x00 }, - { OV511_I2C_BUS, 0x08, 0xc8 }, /* Auto field freq */ - { OV511_I2C_BUS, 0x09, 0x01 }, /* Chrom. trap off, APER=0.25 */ - { OV511_I2C_BUS, 0x0a, 0x80 }, /* BRIG=128 */ - { OV511_I2C_BUS, 0x0b, 0x40 }, /* CONT=1.0 */ - { OV511_I2C_BUS, 0x0c, 0x40 }, /* SATN=1.0 */ - { OV511_I2C_BUS, 0x0d, 0x00 }, /* HUE=0 */ - { OV511_I2C_BUS, 0x0f, 0x00 }, - { OV511_I2C_BUS, 0x11, 0x0c }, - { OV511_I2C_BUS, 0x12, 0x00 }, - { OV511_I2C_BUS, 0x13, 0x00 }, - { OV511_I2C_BUS, 0x14, 0x00 }, - { OV511_I2C_BUS, 0x15, 0x00 }, - { OV511_I2C_BUS, 0x16, 0x00 }, - { OV511_I2C_BUS, 0x17, 0x00 }, - { OV511_I2C_BUS, 0x02, 0xc0 }, /* Composite input 0 */ - { OV511_DONE_BUS, 0x0, 0x00 }, - }; - -// FIXME: I don't know how to sync or reset it yet -#if 0 - if (ov51x_init_saa_sensor(ov) < 0) { - err("Failed to initialize the SAA7111A"); - return -1; - } else { - PDEBUG(1, "SAA7111A sensor detected"); - } -#endif - - /* 640x480 not supported with PAL */ - if (ov->pal) { - ov->maxwidth = 320; - ov->maxheight = 240; /* Even field only */ - } else { - ov->maxwidth = 640; - ov->maxheight = 480; /* Even/Odd fields */ - } - - ov->minwidth = 320; - ov->minheight = 240; /* Even field only */ - - ov->has_decoder = 1; - ov->num_inputs = 8; - ov->norm = VIDEO_MODE_AUTO; - ov->stop_during_set = 0; /* Decoder guarantees stable image */ - - /* Decoder doesn't change these values, so we use these instead of - * acutally reading the registers (which doesn't work) */ - ov->brightness = 0x80 << 8; - ov->contrast = 0x40 << 9; - ov->colour = 0x40 << 9; - ov->hue = 32768; - - PDEBUG(4, "Writing SAA7111A registers"); - if (write_regvals(ov, aRegvalsNormSAA7111A)) - return -1; - - /* Detect version of decoder. This must be done after writing the - * initial regs or the decoder will lock up. */ - rc = i2c_r(ov, 0x00); - - if (rc < 0) { - err("Error detecting sensor version"); - return -1; - } else { - dev_info(&ov->dev->dev, - "Sensor is an SAA7111A (version 0x%x)\n", rc); - ov->sensor = SEN_SAA7111A; - } - - // FIXME: Fix this for OV518(+) - /* Latch to negative edge of clock. Otherwise, we get incorrect - * colors and jitter in the digital signal. */ - if (ov->bclass == BCL_OV511) - reg_w(ov, 0x11, 0x00); - else - dev_warn(&ov->dev->dev, - "SAA7111A not yet supported with OV518/OV518+\n"); - - return 0; -} - -/* This initializes the OV511/OV511+ and the sensor */ -static int -ov511_configure(struct usb_ov511 *ov) -{ - static struct ov511_regvals aRegvalsInit511[] = { - { OV511_REG_BUS, R51x_SYS_RESET, 0x7f }, - { OV511_REG_BUS, R51x_SYS_INIT, 0x01 }, - { OV511_REG_BUS, R51x_SYS_RESET, 0x7f }, - { OV511_REG_BUS, R51x_SYS_INIT, 0x01 }, - { OV511_REG_BUS, R51x_SYS_RESET, 0x3f }, - { OV511_REG_BUS, R51x_SYS_INIT, 0x01 }, - { OV511_REG_BUS, R51x_SYS_RESET, 0x3d }, - { OV511_DONE_BUS, 0x0, 0x00}, - }; - - static struct ov511_regvals aRegvalsNorm511[] = { - { OV511_REG_BUS, R511_DRAM_FLOW_CTL, 0x01 }, - { OV511_REG_BUS, R51x_SYS_SNAP, 0x00 }, - { OV511_REG_BUS, R51x_SYS_SNAP, 0x02 }, - { OV511_REG_BUS, R51x_SYS_SNAP, 0x00 }, - { OV511_REG_BUS, R511_FIFO_OPTS, 0x1f }, - { OV511_REG_BUS, R511_COMP_EN, 0x00 }, - { OV511_REG_BUS, R511_COMP_LUT_EN, 0x03 }, - { OV511_DONE_BUS, 0x0, 0x00 }, - }; - - static struct ov511_regvals aRegvalsNorm511Plus[] = { - { OV511_REG_BUS, R511_DRAM_FLOW_CTL, 0xff }, - { OV511_REG_BUS, R51x_SYS_SNAP, 0x00 }, - { OV511_REG_BUS, R51x_SYS_SNAP, 0x02 }, - { OV511_REG_BUS, R51x_SYS_SNAP, 0x00 }, - { OV511_REG_BUS, R511_FIFO_OPTS, 0xff }, - { OV511_REG_BUS, R511_COMP_EN, 0x00 }, - { OV511_REG_BUS, R511_COMP_LUT_EN, 0x03 }, - { OV511_DONE_BUS, 0x0, 0x00 }, - }; - - PDEBUG(4, ""); - - ov->customid = reg_r(ov, R511_SYS_CUST_ID); - if (ov->customid < 0) { - err("Unable to read camera bridge registers"); - goto error; - } - - PDEBUG (1, "CustomID = %d", ov->customid); - ov->desc = symbolic(camlist, ov->customid); - dev_info(&ov->dev->dev, "model: %s\n", ov->desc); - - if (0 == strcmp(ov->desc, NOT_DEFINED_STR)) { - err("Camera type (%d) not recognized", ov->customid); - err("Please notify " EMAIL " of the name,"); - err("manufacturer, model, and this number of your camera."); - err("Also include the output of the detection process."); - } - - if (ov->customid == 70) /* USB Life TV (PAL/SECAM) */ - ov->pal = 1; - - if (write_regvals(ov, aRegvalsInit511)) - goto error; - - if (ov->led_policy == LED_OFF || ov->led_policy == LED_AUTO) - ov51x_led_control(ov, 0); - - /* The OV511+ has undocumented bits in the flow control register. - * Setting it to 0xff fixes the corruption with moving objects. */ - if (ov->bridge == BRG_OV511) { - if (write_regvals(ov, aRegvalsNorm511)) - goto error; - } else if (ov->bridge == BRG_OV511PLUS) { - if (write_regvals(ov, aRegvalsNorm511Plus)) - goto error; - } else { - err("Invalid bridge"); - } - - if (ov511_init_compression(ov)) - goto error; - - ov->packet_numbering = 1; - ov511_set_packet_size(ov, 0); - - ov->snap_enabled = snapshot; - - /* Test for 7xx0 */ - PDEBUG(3, "Testing for 0V7xx0"); - ov->primary_i2c_slave = OV7xx0_SID; - if (ov51x_set_slave_ids(ov, OV7xx0_SID) < 0) - goto error; - - if (i2c_w(ov, 0x12, 0x80) < 0) { - /* Test for 6xx0 */ - PDEBUG(3, "Testing for 0V6xx0"); - ov->primary_i2c_slave = OV6xx0_SID; - if (ov51x_set_slave_ids(ov, OV6xx0_SID) < 0) - goto error; - - if (i2c_w(ov, 0x12, 0x80) < 0) { - /* Test for 8xx0 */ - PDEBUG(3, "Testing for 0V8xx0"); - ov->primary_i2c_slave = OV8xx0_SID; - if (ov51x_set_slave_ids(ov, OV8xx0_SID) < 0) - goto error; - - if (i2c_w(ov, 0x12, 0x80) < 0) { - /* Test for SAA7111A */ - PDEBUG(3, "Testing for SAA7111A"); - ov->primary_i2c_slave = SAA7111A_SID; - if (ov51x_set_slave_ids(ov, SAA7111A_SID) < 0) - goto error; - - if (i2c_w(ov, 0x0d, 0x00) < 0) { - /* Test for KS0127 */ - PDEBUG(3, "Testing for KS0127"); - ov->primary_i2c_slave = KS0127_SID; - if (ov51x_set_slave_ids(ov, KS0127_SID) < 0) - goto error; - - if (i2c_w(ov, 0x10, 0x00) < 0) { - err("Can't determine sensor slave IDs"); - goto error; - } else { - if (ks0127_configure(ov) < 0) { - err("Failed to configure KS0127"); - goto error; - } - } - } else { - if (saa7111a_configure(ov) < 0) { - err("Failed to configure SAA7111A"); - goto error; - } - } - } else { - err("Detected unsupported OV8xx0 sensor"); - goto error; - } - } else { - if (ov6xx0_configure(ov) < 0) { - err("Failed to configure OV6xx0"); - goto error; - } - } - } else { - if (ov7xx0_configure(ov) < 0) { - err("Failed to configure OV7xx0"); - goto error; - } - } - - return 0; - -error: - err("OV511 Config failed"); - - return -EBUSY; -} - -/* This initializes the OV518/OV518+ and the sensor */ -static int -ov518_configure(struct usb_ov511 *ov) -{ - /* For 518 and 518+ */ - static struct ov511_regvals aRegvalsInit518[] = { - { OV511_REG_BUS, R51x_SYS_RESET, 0x40 }, - { OV511_REG_BUS, R51x_SYS_INIT, 0xe1 }, - { OV511_REG_BUS, R51x_SYS_RESET, 0x3e }, - { OV511_REG_BUS, R51x_SYS_INIT, 0xe1 }, - { OV511_REG_BUS, R51x_SYS_RESET, 0x00 }, - { OV511_REG_BUS, R51x_SYS_INIT, 0xe1 }, - { OV511_REG_BUS, 0x46, 0x00 }, - { OV511_REG_BUS, 0x5d, 0x03 }, - { OV511_DONE_BUS, 0x0, 0x00}, - }; - - static struct ov511_regvals aRegvalsNorm518[] = { - { OV511_REG_BUS, R51x_SYS_SNAP, 0x02 }, /* Reset */ - { OV511_REG_BUS, R51x_SYS_SNAP, 0x01 }, /* Enable */ - { OV511_REG_BUS, 0x31, 0x0f }, - { OV511_REG_BUS, 0x5d, 0x03 }, - { OV511_REG_BUS, 0x24, 0x9f }, - { OV511_REG_BUS, 0x25, 0x90 }, - { OV511_REG_BUS, 0x20, 0x00 }, - { OV511_REG_BUS, 0x51, 0x04 }, - { OV511_REG_BUS, 0x71, 0x19 }, - { OV511_DONE_BUS, 0x0, 0x00 }, - }; - - static struct ov511_regvals aRegvalsNorm518Plus[] = { - { OV511_REG_BUS, R51x_SYS_SNAP, 0x02 }, /* Reset */ - { OV511_REG_BUS, R51x_SYS_SNAP, 0x01 }, /* Enable */ - { OV511_REG_BUS, 0x31, 0x0f }, - { OV511_REG_BUS, 0x5d, 0x03 }, - { OV511_REG_BUS, 0x24, 0x9f }, - { OV511_REG_BUS, 0x25, 0x90 }, - { OV511_REG_BUS, 0x20, 0x60 }, - { OV511_REG_BUS, 0x51, 0x02 }, - { OV511_REG_BUS, 0x71, 0x19 }, - { OV511_REG_BUS, 0x40, 0xff }, - { OV511_REG_BUS, 0x41, 0x42 }, - { OV511_REG_BUS, 0x46, 0x00 }, - { OV511_REG_BUS, 0x33, 0x04 }, - { OV511_REG_BUS, 0x21, 0x19 }, - { OV511_REG_BUS, 0x3f, 0x10 }, - { OV511_DONE_BUS, 0x0, 0x00 }, - }; - - PDEBUG(4, ""); - - /* First 5 bits of custom ID reg are a revision ID on OV518 */ - dev_info(&ov->dev->dev, "Device revision %d\n", - 0x1F & reg_r(ov, R511_SYS_CUST_ID)); - - /* Give it the default description */ - ov->desc = symbolic(camlist, 0); - - if (write_regvals(ov, aRegvalsInit518)) - goto error; - - /* Set LED GPIO pin to output mode */ - if (reg_w_mask(ov, 0x57, 0x00, 0x02) < 0) - goto error; - - /* LED is off by default with OV518; have to explicitly turn it on */ - if (ov->led_policy == LED_OFF || ov->led_policy == LED_AUTO) - ov51x_led_control(ov, 0); - else - ov51x_led_control(ov, 1); - - /* Don't require compression if dumppix is enabled; otherwise it's - * required. OV518 has no uncompressed mode, to save RAM. */ - if (!dumppix && !ov->compress) { - ov->compress = 1; - dev_warn(&ov->dev->dev, - "Compression required with OV518...enabling\n"); - } - - if (ov->bridge == BRG_OV518) { - if (write_regvals(ov, aRegvalsNorm518)) - goto error; - } else if (ov->bridge == BRG_OV518PLUS) { - if (write_regvals(ov, aRegvalsNorm518Plus)) - goto error; - } else { - err("Invalid bridge"); - } - - if (reg_w(ov, 0x2f, 0x80) < 0) - goto error; - - if (ov518_init_compression(ov)) - goto error; - - if (ov->bridge == BRG_OV518) - { - struct usb_interface *ifp; - struct usb_host_interface *alt; - __u16 mxps = 0; - - ifp = usb_ifnum_to_if(ov->dev, 0); - if (ifp) { - alt = usb_altnum_to_altsetting(ifp, 7); - if (alt) - mxps = le16_to_cpu(alt->endpoint[0].desc.wMaxPacketSize); - } - - /* Some OV518s have packet numbering by default, some don't */ - if (mxps == 897) - ov->packet_numbering = 1; - else - ov->packet_numbering = 0; - } else { - /* OV518+ has packet numbering turned on by default */ - ov->packet_numbering = 1; - } - - ov518_set_packet_size(ov, 0); - - ov->snap_enabled = snapshot; - - /* Test for 76xx */ - ov->primary_i2c_slave = OV7xx0_SID; - if (ov51x_set_slave_ids(ov, OV7xx0_SID) < 0) - goto error; - - /* The OV518 must be more aggressive about sensor detection since - * I2C write will never fail if the sensor is not present. We have - * to try to initialize the sensor to detect its presence */ - - if (init_ov_sensor(ov) < 0) { - /* Test for 6xx0 */ - ov->primary_i2c_slave = OV6xx0_SID; - if (ov51x_set_slave_ids(ov, OV6xx0_SID) < 0) - goto error; - - if (init_ov_sensor(ov) < 0) { - /* Test for 8xx0 */ - ov->primary_i2c_slave = OV8xx0_SID; - if (ov51x_set_slave_ids(ov, OV8xx0_SID) < 0) - goto error; - - if (init_ov_sensor(ov) < 0) { - err("Can't determine sensor slave IDs"); - goto error; - } else { - err("Detected unsupported OV8xx0 sensor"); - goto error; - } - } else { - if (ov6xx0_configure(ov) < 0) { - err("Failed to configure OV6xx0"); - goto error; - } - } - } else { - if (ov7xx0_configure(ov) < 0) { - err("Failed to configure OV7xx0"); - goto error; - } - } - - ov->maxwidth = 352; - ov->maxheight = 288; - - // The OV518 cannot go as low as the sensor can - ov->minwidth = 160; - ov->minheight = 120; - - return 0; - -error: - err("OV518 Config failed"); - - return -EBUSY; -} - -/**************************************************************************** - * sysfs - ***************************************************************************/ - -static inline struct usb_ov511 *cd_to_ov(struct device *cd) -{ - struct video_device *vdev = to_video_device(cd); - return video_get_drvdata(vdev); -} - -static ssize_t show_custom_id(struct device *cd, - struct device_attribute *attr, char *buf) -{ - struct usb_ov511 *ov = cd_to_ov(cd); - return sprintf(buf, "%d\n", ov->customid); -} -static DEVICE_ATTR(custom_id, S_IRUGO, show_custom_id, NULL); - -static ssize_t show_model(struct device *cd, - struct device_attribute *attr, char *buf) -{ - struct usb_ov511 *ov = cd_to_ov(cd); - return sprintf(buf, "%s\n", ov->desc); -} -static DEVICE_ATTR(model, S_IRUGO, show_model, NULL); - -static ssize_t show_bridge(struct device *cd, - struct device_attribute *attr, char *buf) -{ - struct usb_ov511 *ov = cd_to_ov(cd); - return sprintf(buf, "%s\n", symbolic(brglist, ov->bridge)); -} -static DEVICE_ATTR(bridge, S_IRUGO, show_bridge, NULL); - -static ssize_t show_sensor(struct device *cd, - struct device_attribute *attr, char *buf) -{ - struct usb_ov511 *ov = cd_to_ov(cd); - return sprintf(buf, "%s\n", symbolic(senlist, ov->sensor)); -} -static DEVICE_ATTR(sensor, S_IRUGO, show_sensor, NULL); - -static ssize_t show_brightness(struct device *cd, - struct device_attribute *attr, char *buf) -{ - struct usb_ov511 *ov = cd_to_ov(cd); - unsigned short x; - - if (!ov->dev) - return -ENODEV; - sensor_get_brightness(ov, &x); - return sprintf(buf, "%d\n", x >> 8); -} -static DEVICE_ATTR(brightness, S_IRUGO, show_brightness, NULL); - -static ssize_t show_saturation(struct device *cd, - struct device_attribute *attr, char *buf) -{ - struct usb_ov511 *ov = cd_to_ov(cd); - unsigned short x; - - if (!ov->dev) - return -ENODEV; - sensor_get_saturation(ov, &x); - return sprintf(buf, "%d\n", x >> 8); -} -static DEVICE_ATTR(saturation, S_IRUGO, show_saturation, NULL); - -static ssize_t show_contrast(struct device *cd, - struct device_attribute *attr, char *buf) -{ - struct usb_ov511 *ov = cd_to_ov(cd); - unsigned short x; - - if (!ov->dev) - return -ENODEV; - sensor_get_contrast(ov, &x); - return sprintf(buf, "%d\n", x >> 8); -} -static DEVICE_ATTR(contrast, S_IRUGO, show_contrast, NULL); - -static ssize_t show_hue(struct device *cd, - struct device_attribute *attr, char *buf) -{ - struct usb_ov511 *ov = cd_to_ov(cd); - unsigned short x; - - if (!ov->dev) - return -ENODEV; - sensor_get_hue(ov, &x); - return sprintf(buf, "%d\n", x >> 8); -} -static DEVICE_ATTR(hue, S_IRUGO, show_hue, NULL); - -static ssize_t show_exposure(struct device *cd, - struct device_attribute *attr, char *buf) -{ - struct usb_ov511 *ov = cd_to_ov(cd); - unsigned char exp = 0; - - if (!ov->dev) - return -ENODEV; - sensor_get_exposure(ov, &exp); - return sprintf(buf, "%d\n", exp); -} -static DEVICE_ATTR(exposure, S_IRUGO, show_exposure, NULL); - -static int ov_create_sysfs(struct video_device *vdev) -{ - int rc; - - rc = device_create_file(&vdev->dev, &dev_attr_custom_id); - if (rc) goto err; - rc = device_create_file(&vdev->dev, &dev_attr_model); - if (rc) goto err_id; - rc = device_create_file(&vdev->dev, &dev_attr_bridge); - if (rc) goto err_model; - rc = device_create_file(&vdev->dev, &dev_attr_sensor); - if (rc) goto err_bridge; - rc = device_create_file(&vdev->dev, &dev_attr_brightness); - if (rc) goto err_sensor; - rc = device_create_file(&vdev->dev, &dev_attr_saturation); - if (rc) goto err_bright; - rc = device_create_file(&vdev->dev, &dev_attr_contrast); - if (rc) goto err_sat; - rc = device_create_file(&vdev->dev, &dev_attr_hue); - if (rc) goto err_contrast; - rc = device_create_file(&vdev->dev, &dev_attr_exposure); - if (rc) goto err_hue; - - return 0; - -err_hue: - device_remove_file(&vdev->dev, &dev_attr_hue); -err_contrast: - device_remove_file(&vdev->dev, &dev_attr_contrast); -err_sat: - device_remove_file(&vdev->dev, &dev_attr_saturation); -err_bright: - device_remove_file(&vdev->dev, &dev_attr_brightness); -err_sensor: - device_remove_file(&vdev->dev, &dev_attr_sensor); -err_bridge: - device_remove_file(&vdev->dev, &dev_attr_bridge); -err_model: - device_remove_file(&vdev->dev, &dev_attr_model); -err_id: - device_remove_file(&vdev->dev, &dev_attr_custom_id); -err: - return rc; -} - -/**************************************************************************** - * USB routines - ***************************************************************************/ - -static int -ov51x_probe(struct usb_interface *intf, const struct usb_device_id *id) -{ - struct usb_device *dev = interface_to_usbdev(intf); - struct usb_interface_descriptor *idesc; - struct usb_ov511 *ov; - int i, rc, nr; - - PDEBUG(1, "probing for device..."); - - /* We don't handle multi-config cameras */ - if (dev->descriptor.bNumConfigurations != 1) - return -ENODEV; - - idesc = &intf->cur_altsetting->desc; - - if (idesc->bInterfaceClass != 0xFF) - return -ENODEV; - if (idesc->bInterfaceSubClass != 0x00) - return -ENODEV; - - if ((ov = kzalloc(sizeof(*ov), GFP_KERNEL)) == NULL) { - err("couldn't kmalloc ov struct"); - goto error_out; - } - - ov->dev = dev; - ov->iface = idesc->bInterfaceNumber; - ov->led_policy = led; - ov->compress = compress; - ov->lightfreq = lightfreq; - ov->num_inputs = 1; /* Video decoder init functs. change this */ - ov->stop_during_set = !fastset; - ov->backlight = backlight; - ov->mirror = mirror; - ov->auto_brt = autobright; - ov->auto_gain = autogain; - ov->auto_exp = autoexp; - - switch (le16_to_cpu(dev->descriptor.idProduct)) { - case PROD_OV511: - ov->bridge = BRG_OV511; - ov->bclass = BCL_OV511; - break; - case PROD_OV511PLUS: - ov->bridge = BRG_OV511PLUS; - ov->bclass = BCL_OV511; - break; - case PROD_OV518: - ov->bridge = BRG_OV518; - ov->bclass = BCL_OV518; - break; - case PROD_OV518PLUS: - ov->bridge = BRG_OV518PLUS; - ov->bclass = BCL_OV518; - break; - case PROD_ME2CAM: - if (le16_to_cpu(dev->descriptor.idVendor) != VEND_MATTEL) - goto error; - ov->bridge = BRG_OV511PLUS; - ov->bclass = BCL_OV511; - break; - default: - err("Unknown product ID 0x%04x", le16_to_cpu(dev->descriptor.idProduct)); - goto error; - } - - dev_info(&intf->dev, "USB %s video device found\n", - symbolic(brglist, ov->bridge)); - - init_waitqueue_head(&ov->wq); - - mutex_init(&ov->lock); /* to 1 == available */ - mutex_init(&ov->buf_lock); - mutex_init(&ov->i2c_lock); - mutex_init(&ov->cbuf_lock); - - ov->buf_state = BUF_NOT_ALLOCATED; - - if (usb_make_path(dev, ov->usb_path, OV511_USB_PATH_LEN) < 0) { - err("usb_make_path error"); - goto error; - } - - /* Allocate control transfer buffer. */ - /* Must be kmalloc()'ed, for DMA compatibility */ - ov->cbuf = kmalloc(OV511_CBUF_SIZE, GFP_KERNEL); - if (!ov->cbuf) - goto error; - - if (ov->bclass == BCL_OV518) { - if (ov518_configure(ov) < 0) - goto error; - } else { - if (ov511_configure(ov) < 0) - goto error; - } - - for (i = 0; i < OV511_NUMFRAMES; i++) { - ov->frame[i].framenum = i; - init_waitqueue_head(&ov->frame[i].wq); - } - - for (i = 0; i < OV511_NUMSBUF; i++) { - ov->sbuf[i].ov = ov; - spin_lock_init(&ov->sbuf[i].lock); - ov->sbuf[i].n = i; - } - - /* Unnecessary? (This is done on open(). Need to make sure variables - * are properly initialized without this before removing it, though). */ - if (ov51x_set_default_params(ov) < 0) - goto error; - -#ifdef OV511_DEBUG - if (dump_bridge) { - if (ov->bclass == BCL_OV511) - ov511_dump_regs(ov); - else - ov518_dump_regs(ov); - } -#endif - - ov->vdev = video_device_alloc(); - if (!ov->vdev) - goto error; - - memcpy(ov->vdev, &vdev_template, sizeof(*ov->vdev)); - ov->vdev->parent = &intf->dev; - video_set_drvdata(ov->vdev, ov); - - mutex_lock(&ov->lock); - - /* Check to see next free device and mark as used */ - nr = find_first_zero_bit(&ov511_devused, OV511_MAX_UNIT_VIDEO); - - /* Registers device */ - if (unit_video[nr] != 0) - rc = video_register_device(ov->vdev, VFL_TYPE_GRABBER, - unit_video[nr]); - else - rc = video_register_device(ov->vdev, VFL_TYPE_GRABBER, -1); - - if (rc < 0) { - err("video_register_device failed"); - mutex_unlock(&ov->lock); - goto error; - } - - /* Mark device as used */ - ov511_devused |= 1 << nr; - ov->nr = nr; - - dev_info(&intf->dev, "Device at %s registered to %s\n", - ov->usb_path, video_device_node_name(ov->vdev)); - - usb_set_intfdata(intf, ov); - if (ov_create_sysfs(ov->vdev)) { - err("ov_create_sysfs failed"); - ov511_devused &= ~(1 << nr); - mutex_unlock(&ov->lock); - goto error; - } - - mutex_unlock(&ov->lock); - - return 0; - -error: - if (ov->vdev) { - if (!video_is_registered(ov->vdev)) - video_device_release(ov->vdev); - else - video_unregister_device(ov->vdev); - ov->vdev = NULL; - } - - if (ov->cbuf) { - mutex_lock(&ov->cbuf_lock); - kfree(ov->cbuf); - ov->cbuf = NULL; - mutex_unlock(&ov->cbuf_lock); - } - - kfree(ov); - ov = NULL; - -error_out: - err("Camera initialization failed"); - return -EIO; -} - -static void -ov51x_disconnect(struct usb_interface *intf) -{ - struct usb_ov511 *ov = usb_get_intfdata(intf); - int n; - - PDEBUG(3, ""); - - mutex_lock(&ov->lock); - usb_set_intfdata (intf, NULL); - - /* Free device number */ - ov511_devused &= ~(1 << ov->nr); - - if (ov->vdev) - video_unregister_device(ov->vdev); - - for (n = 0; n < OV511_NUMFRAMES; n++) - ov->frame[n].grabstate = FRAME_ERROR; - - ov->curframe = -1; - - /* This will cause the process to request another frame */ - for (n = 0; n < OV511_NUMFRAMES; n++) - wake_up_interruptible(&ov->frame[n].wq); - - wake_up_interruptible(&ov->wq); - - ov->streaming = 0; - ov51x_unlink_isoc(ov); - mutex_unlock(&ov->lock); - - ov->dev = NULL; - - /* Free the memory */ - if (!ov->user) { - mutex_lock(&ov->cbuf_lock); - kfree(ov->cbuf); - ov->cbuf = NULL; - mutex_unlock(&ov->cbuf_lock); - - ov51x_dealloc(ov); - kfree(ov); - ov = NULL; - } - - PDEBUG(3, "Disconnect complete"); -} - -static struct usb_driver ov511_driver = { - .name = "ov511", - .id_table = device_table, - .probe = ov51x_probe, - .disconnect = ov51x_disconnect -}; - -/**************************************************************************** - * - * Module routines - * - ***************************************************************************/ - -static int __init -usb_ov511_init(void) -{ - int retval; - - retval = usb_register(&ov511_driver); - if (retval) - goto out; - - printk(KERN_INFO KBUILD_MODNAME ": " DRIVER_VERSION ":" - DRIVER_DESC "\n"); - -out: - return retval; -} - -static void __exit -usb_ov511_exit(void) -{ - usb_deregister(&ov511_driver); - printk(KERN_INFO KBUILD_MODNAME ": driver deregistered\n"); -} - -module_init(usb_ov511_init); -module_exit(usb_ov511_exit); - diff --git a/drivers/media/video/ov511.h b/drivers/media/video/ov511.h deleted file mode 100644 index c450c92468d..00000000000 --- a/drivers/media/video/ov511.h +++ /dev/null @@ -1,573 +0,0 @@ -#ifndef __LINUX_OV511_H -#define __LINUX_OV511_H - -#include <asm/uaccess.h> -#include <linux/videodev.h> -#include <media/v4l2-common.h> -#include <media/v4l2-ioctl.h> -#include <linux/usb.h> -#include <linux/mutex.h> - -#define OV511_DEBUG /* Turn on debug messages */ - -#ifdef OV511_DEBUG - #define PDEBUG(level, fmt, args...) \ - if (debug >= (level)) \ - printk(KERN_INFO KBUILD_MODNAME "[%s:%d] \n" fmt, \ - __func__, __LINE__ , ## args) -#else - #define PDEBUG(level, fmt, args...) do {} while(0) -#endif - -/* This macro restricts an int variable to an inclusive range */ -#define RESTRICT_TO_RANGE(v,mi,ma) { \ - if ((v) < (mi)) (v) = (mi); \ - else if ((v) > (ma)) (v) = (ma); \ -} - -/* --------------------------------- */ -/* DEFINES FOR OV511 AND OTHER CHIPS */ -/* --------------------------------- */ - -/* USB IDs */ -#define VEND_OMNIVISION 0x05A9 -#define PROD_OV511 0x0511 -#define PROD_OV511PLUS 0xA511 -#define PROD_OV518 0x0518 -#define PROD_OV518PLUS 0xA518 - -#define VEND_MATTEL 0x0813 -#define PROD_ME2CAM 0x0002 - -/* --------------------------------- */ -/* OV51x REGISTER MNEMONICS */ -/* --------------------------------- */ - -/* Camera interface register numbers */ -#define R511_CAM_DELAY 0x10 -#define R511_CAM_EDGE 0x11 -#define R511_CAM_PXCNT 0x12 -#define R511_CAM_LNCNT 0x13 -#define R511_CAM_PXDIV 0x14 -#define R511_CAM_LNDIV 0x15 -#define R511_CAM_UV_EN 0x16 -#define R511_CAM_LINE_MODE 0x17 -#define R511_CAM_OPTS 0x18 - -/* Snapshot mode camera interface register numbers */ -#define R511_SNAP_FRAME 0x19 -#define R511_SNAP_PXCNT 0x1A -#define R511_SNAP_LNCNT 0x1B -#define R511_SNAP_PXDIV 0x1C -#define R511_SNAP_LNDIV 0x1D -#define R511_SNAP_UV_EN 0x1E -#define R511_SNAP_OPTS 0x1F - -/* DRAM register numbers */ -#define R511_DRAM_FLOW_CTL 0x20 -#define R511_DRAM_ARCP 0x21 -#define R511_DRAM_MRC 0x22 -#define R511_DRAM_RFC 0x23 - -/* ISO FIFO register numbers */ -#define R51x_FIFO_PSIZE 0x30 /* 2 bytes wide w/ OV518(+) */ -#define R511_FIFO_OPTS 0x31 - -/* Parallel IO register numbers */ -#define R511_PIO_OPTS 0x38 -#define R511_PIO_DATA 0x39 -#define R511_PIO_BIST 0x3E -#define R518_GPIO_IN 0x55 /* OV518(+) only */ -#define R518_GPIO_OUT 0x56 /* OV518(+) only */ -#define R518_GPIO_CTL 0x57 /* OV518(+) only */ -#define R518_GPIO_PULSE_IN 0x58 /* OV518(+) only */ -#define R518_GPIO_PULSE_CLEAR 0x59 /* OV518(+) only */ -#define R518_GPIO_PULSE_POL 0x5a /* OV518(+) only */ -#define R518_GPIO_PULSE_EN 0x5b /* OV518(+) only */ -#define R518_GPIO_RESET 0x5c /* OV518(+) only */ - -/* I2C registers */ -#define R511_I2C_CTL 0x40 -#define R518_I2C_CTL 0x47 /* OV518(+) only */ -#define R51x_I2C_W_SID 0x41 -#define R51x_I2C_SADDR_3 0x42 -#define R51x_I2C_SADDR_2 0x43 -#define R51x_I2C_R_SID 0x44 -#define R51x_I2C_DATA 0x45 -#define R51x_I2C_CLOCK 0x46 -#define R51x_I2C_TIMEOUT 0x47 - -/* I2C snapshot registers */ -#define R511_SI2C_SADDR_3 0x48 -#define R511_SI2C_DATA 0x49 - -/* System control registers */ -#define R51x_SYS_RESET 0x50 - /* Reset type definitions */ -#define OV511_RESET_UDC 0x01 -#define OV511_RESET_I2C 0x02 -#define OV511_RESET_FIFO 0x04 -#define OV511_RESET_OMNICE 0x08 -#define OV511_RESET_DRAM 0x10 -#define OV511_RESET_CAM_INT 0x20 -#define OV511_RESET_OV511 0x40 -#define OV511_RESET_NOREGS 0x3F /* All but OV511 & regs */ -#define OV511_RESET_ALL 0x7F - -#define R511_SYS_CLOCK_DIV 0x51 -#define R51x_SYS_SNAP 0x52 -#define R51x_SYS_INIT 0x53 -#define R511_SYS_PWR_CLK 0x54 /* OV511+/OV518(+) only */ -#define R511_SYS_LED_CTL 0x55 /* OV511+ only */ -#define R511_SYS_USER 0x5E -#define R511_SYS_CUST_ID 0x5F - -/* OmniCE (compression) registers */ -#define R511_COMP_PHY 0x70 -#define R511_COMP_PHUV 0x71 -#define R511_COMP_PVY 0x72 -#define R511_COMP_PVUV 0x73 -#define R511_COMP_QHY 0x74 -#define R511_COMP_QHUV 0x75 -#define R511_COMP_QVY 0x76 -#define R511_COMP_QVUV 0x77 -#define R511_COMP_EN 0x78 -#define R511_COMP_LUT_EN 0x79 -#define R511_COMP_LUT_BEGIN 0x80 - -/* --------------------------------- */ -/* ALTERNATE NUMBERS */ -/* --------------------------------- */ - -/* Alternate numbers for various max packet sizes (OV511 only) */ -#define OV511_ALT_SIZE_992 0 -#define OV511_ALT_SIZE_993 1 -#define OV511_ALT_SIZE_768 2 -#define OV511_ALT_SIZE_769 3 -#define OV511_ALT_SIZE_512 4 -#define OV511_ALT_SIZE_513 5 -#define OV511_ALT_SIZE_257 6 -#define OV511_ALT_SIZE_0 7 - -/* Alternate numbers for various max packet sizes (OV511+ only) */ -#define OV511PLUS_ALT_SIZE_0 0 -#define OV511PLUS_ALT_SIZE_33 1 -#define OV511PLUS_ALT_SIZE_129 2 -#define OV511PLUS_ALT_SIZE_257 3 -#define OV511PLUS_ALT_SIZE_385 4 -#define OV511PLUS_ALT_SIZE_513 5 -#define OV511PLUS_ALT_SIZE_769 6 -#define OV511PLUS_ALT_SIZE_961 7 - -/* Alternate numbers for various max packet sizes (OV518(+) only) */ -#define OV518_ALT_SIZE_0 0 -#define OV518_ALT_SIZE_128 1 -#define OV518_ALT_SIZE_256 2 -#define OV518_ALT_SIZE_384 3 -#define OV518_ALT_SIZE_512 4 -#define OV518_ALT_SIZE_640 5 -#define OV518_ALT_SIZE_768 6 -#define OV518_ALT_SIZE_896 7 - -/* --------------------------------- */ -/* OV7610 REGISTER MNEMONICS */ -/* --------------------------------- */ - -/* OV7610 registers */ -#define OV7610_REG_GAIN 0x00 /* gain setting (5:0) */ -#define OV7610_REG_BLUE 0x01 /* blue channel balance */ -#define OV7610_REG_RED 0x02 /* red channel balance */ -#define OV7610_REG_SAT 0x03 /* saturation */ - /* 04 reserved */ -#define OV7610_REG_CNT 0x05 /* Y contrast */ -#define OV7610_REG_BRT 0x06 /* Y brightness */ - /* 08-0b reserved */ -#define OV7610_REG_BLUE_BIAS 0x0C /* blue channel bias (5:0) */ -#define OV7610_REG_RED_BIAS 0x0D /* read channel bias (5:0) */ -#define OV7610_REG_GAMMA_COEFF 0x0E /* gamma settings */ -#define OV7610_REG_WB_RANGE 0x0F /* AEC/ALC/S-AWB settings */ -#define OV7610_REG_EXP 0x10 /* manual exposure setting */ -#define OV7610_REG_CLOCK 0x11 /* polarity/clock prescaler */ -#define OV7610_REG_COM_A 0x12 /* misc common regs */ -#define OV7610_REG_COM_B 0x13 /* misc common regs */ -#define OV7610_REG_COM_C 0x14 /* misc common regs */ -#define OV7610_REG_COM_D 0x15 /* misc common regs */ -#define OV7610_REG_FIELD_DIVIDE 0x16 /* field interval/mode settings */ -#define OV7610_REG_HWIN_START 0x17 /* horizontal window start */ -#define OV7610_REG_HWIN_END 0x18 /* horizontal window end */ -#define OV7610_REG_VWIN_START 0x19 /* vertical window start */ -#define OV7610_REG_VWIN_END 0x1A /* vertical window end */ -#define OV7610_REG_PIXEL_SHIFT 0x1B /* pixel shift */ -#define OV7610_REG_ID_HIGH 0x1C /* manufacturer ID MSB */ -#define OV7610_REG_ID_LOW 0x1D /* manufacturer ID LSB */ - /* 0e-0f reserved */ -#define OV7610_REG_COM_E 0x20 /* misc common regs */ -#define OV7610_REG_YOFFSET 0x21 /* Y channel offset */ -#define OV7610_REG_UOFFSET 0x22 /* U channel offset */ - /* 23 reserved */ -#define OV7610_REG_ECW 0x24 /* Exposure white level for AEC */ -#define OV7610_REG_ECB 0x25 /* Exposure black level for AEC */ -#define OV7610_REG_COM_F 0x26 /* misc settings */ -#define OV7610_REG_COM_G 0x27 /* misc settings */ -#define OV7610_REG_COM_H 0x28 /* misc settings */ -#define OV7610_REG_COM_I 0x29 /* misc settings */ -#define OV7610_REG_FRAMERATE_H 0x2A /* frame rate MSB + misc */ -#define OV7610_REG_FRAMERATE_L 0x2B /* frame rate LSB */ -#define OV7610_REG_ALC 0x2C /* Auto Level Control settings */ -#define OV7610_REG_COM_J 0x2D /* misc settings */ -#define OV7610_REG_VOFFSET 0x2E /* V channel offset adjustment */ -#define OV7610_REG_ARRAY_BIAS 0x2F /* Array bias -- don't change */ - /* 30-32 reserved */ -#define OV7610_REG_YGAMMA 0x33 /* misc gamma settings (7:6) */ -#define OV7610_REG_BIAS_ADJUST 0x34 /* misc bias settings */ -#define OV7610_REG_COM_L 0x35 /* misc settings */ - /* 36-37 reserved */ -#define OV7610_REG_COM_K 0x38 /* misc registers */ - -/* --------------------------------- */ -/* I2C ADDRESSES */ -/* --------------------------------- */ - -#define OV7xx0_SID 0x42 -#define OV6xx0_SID 0xC0 -#define OV8xx0_SID 0xA0 -#define KS0127_SID 0xD8 -#define SAA7111A_SID 0x48 - -/* --------------------------------- */ -/* MISCELLANEOUS DEFINES */ -/* --------------------------------- */ - -#define I2C_CLOCK_PRESCALER 0x03 - -#define FRAMES_PER_DESC 10 /* FIXME - What should this be? */ -#define MAX_FRAME_SIZE_PER_DESC 993 /* For statically allocated stuff */ -#define PIXELS_PER_SEG 256 /* Pixels per segment */ - -#define OV511_ENDPOINT_ADDRESS 1 /* Isoc endpoint number */ - -#define OV511_NUMFRAMES 2 -#if OV511_NUMFRAMES > VIDEO_MAX_FRAME - #error "OV511_NUMFRAMES is too high" -#endif - -#define OV511_NUMSBUF 2 - -/* Control transfers use up to 4 bytes */ -#define OV511_CBUF_SIZE 4 - -/* Size of usb_make_path() buffer */ -#define OV511_USB_PATH_LEN 64 - -/* Bridge types */ -enum { - BRG_UNKNOWN, - BRG_OV511, - BRG_OV511PLUS, - BRG_OV518, - BRG_OV518PLUS, -}; - -/* Bridge classes */ -enum { - BCL_UNKNOWN, - BCL_OV511, - BCL_OV518, -}; - -/* Sensor types */ -enum { - SEN_UNKNOWN, - SEN_OV76BE, - SEN_OV7610, - SEN_OV7620, - SEN_OV7620AE, - SEN_OV6620, - SEN_OV6630, - SEN_OV6630AE, - SEN_OV6630AF, - SEN_OV8600, - SEN_KS0127, - SEN_KS0127B, - SEN_SAA7111A, -}; - -enum { - STATE_SCANNING, /* Scanning for start */ - STATE_HEADER, /* Parsing header */ - STATE_LINES, /* Parsing lines */ -}; - -/* Buffer states */ -enum { - BUF_NOT_ALLOCATED, - BUF_ALLOCATED, -}; - -/* --------- Definition of ioctl interface --------- */ - -#define OV511_INTERFACE_VER 101 - -/* LED options */ -enum { - LED_OFF, - LED_ON, - LED_AUTO, -}; - -/* Raw frame formats */ -enum { - RAWFMT_INVALID, - RAWFMT_YUV400, - RAWFMT_YUV420, - RAWFMT_YUV422, - RAWFMT_GBR422, -}; - -struct ov511_i2c_struct { - unsigned char slave; /* Write slave ID (read ID - 1) */ - unsigned char reg; /* Index of register */ - unsigned char value; /* User sets this w/ write, driver does w/ read */ - unsigned char mask; /* Bits to be changed. Not used with read ops */ -}; - -/* ioctls */ -#define OV511IOC_WI2C _IOW('v', BASE_VIDIOCPRIVATE + 5, \ - struct ov511_i2c_struct) -#define OV511IOC_RI2C _IOWR('v', BASE_VIDIOCPRIVATE + 6, \ - struct ov511_i2c_struct) -/* ------------- End IOCTL interface -------------- */ - -struct usb_ov511; /* Forward declaration */ - -struct ov511_sbuf { - struct usb_ov511 *ov; - unsigned char *data; - struct urb *urb; - spinlock_t lock; - int n; -}; - -enum { - FRAME_UNUSED, /* Unused (no MCAPTURE) */ - FRAME_READY, /* Ready to start grabbing */ - FRAME_GRABBING, /* In the process of being grabbed into */ - FRAME_DONE, /* Finished grabbing, but not been synced yet */ - FRAME_ERROR, /* Something bad happened while processing */ -}; - -struct ov511_regvals { - enum { - OV511_DONE_BUS, - OV511_REG_BUS, - OV511_I2C_BUS, - } bus; - unsigned char reg; - unsigned char val; -}; - -struct ov511_frame { - int framenum; /* Index of this frame */ - unsigned char *data; /* Frame buffer */ - unsigned char *tempdata; /* Temp buffer for multi-stage conversions */ - unsigned char *rawdata; /* Raw camera data buffer */ - unsigned char *compbuf; /* Temp buffer for decompressor */ - - int depth; /* Bytes per pixel */ - int width; /* Width application is expecting */ - int height; /* Height application is expecting */ - - int rawwidth; /* Actual width of frame sent from camera */ - int rawheight; /* Actual height of frame sent from camera */ - - int sub_flag; /* Sub-capture mode for this frame? */ - unsigned int format; /* Format for this frame */ - int compressed; /* Is frame compressed? */ - - volatile int grabstate; /* State of grabbing */ - int scanstate; /* State of scanning */ - - int bytes_recvd; /* Number of image bytes received from camera */ - - long bytes_read; /* Amount that has been read() */ - - wait_queue_head_t wq; /* Processes waiting */ - - int snapshot; /* True if frame was a snapshot */ -}; - -#define DECOMP_INTERFACE_VER 4 - -/* Compression module operations */ -struct ov51x_decomp_ops { - int (*decomp_400)(unsigned char *, unsigned char *, unsigned char *, - int, int, int); - int (*decomp_420)(unsigned char *, unsigned char *, unsigned char *, - int, int, int); - int (*decomp_422)(unsigned char *, unsigned char *, unsigned char *, - int, int, int); - struct module *owner; -}; - -struct usb_ov511 { - struct video_device *vdev; - struct usb_device *dev; - - int customid; - char *desc; - unsigned char iface; - char usb_path[OV511_USB_PATH_LEN]; - - /* Determined by sensor type */ - int maxwidth; - int maxheight; - int minwidth; - int minheight; - - int brightness; - int colour; - int contrast; - int hue; - int whiteness; - int exposure; - int auto_brt; /* Auto brightness enabled flag */ - int auto_gain; /* Auto gain control enabled flag */ - int auto_exp; /* Auto exposure enabled flag */ - int backlight; /* Backlight exposure algorithm flag */ - int mirror; /* Image is reversed horizontally */ - - int led_policy; /* LED: off|on|auto; OV511+ only */ - - struct mutex lock; /* Serializes user-accessible operations */ - int user; /* user count for exclusive use */ - - int streaming; /* Are we streaming Isochronous? */ - int grabbing; /* Are we grabbing? */ - - int compress; /* Should the next frame be compressed? */ - int compress_inited; /* Are compression params uploaded? */ - - int lightfreq; /* Power (lighting) frequency */ - int bandfilt; /* Banding filter enabled flag */ - - unsigned char *fbuf; /* Videodev buffer area */ - unsigned char *tempfbuf; /* Temporary (intermediate) buffer area */ - unsigned char *rawfbuf; /* Raw camera data buffer area */ - - int sub_flag; /* Pix Array subcapture on flag */ - int subx; /* Pix Array subcapture x offset */ - int suby; /* Pix Array subcapture y offset */ - int subw; /* Pix Array subcapture width */ - int subh; /* Pix Array subcapture height */ - - int curframe; /* Current receiving sbuf */ - struct ov511_frame frame[OV511_NUMFRAMES]; - - struct ov511_sbuf sbuf[OV511_NUMSBUF]; - - wait_queue_head_t wq; /* Processes waiting */ - - int snap_enabled; /* Snapshot mode enabled */ - - int bridge; /* Type of bridge (BRG_*) */ - int bclass; /* Class of bridge (BCL_*) */ - int sensor; /* Type of image sensor chip (SEN_*) */ - - int packet_size; /* Frame size per isoc desc */ - int packet_numbering; /* Is ISO frame numbering enabled? */ - - /* Framebuffer/sbuf management */ - int buf_state; - struct mutex buf_lock; - - struct ov51x_decomp_ops *decomp_ops; - - /* Stop streaming while changing picture settings */ - int stop_during_set; - - int stopped; /* Streaming is temporarily paused */ - - /* Video decoder stuff */ - int input; /* Composite, S-VIDEO, etc... */ - int num_inputs; /* Number of inputs */ - int norm; /* NTSC / PAL / SECAM */ - int has_decoder; /* Device has a video decoder */ - int pal; /* Device is designed for PAL resolution */ - - /* ov511 device number ID */ - int nr; /* Stores a device number */ - - /* I2C interface */ - struct mutex i2c_lock; /* Protect I2C controller regs */ - unsigned char primary_i2c_slave; /* I2C write id of sensor */ - - /* Control transaction stuff */ - unsigned char *cbuf; /* Buffer for payload */ - struct mutex cbuf_lock; -}; - -/* Used to represent a list of values and their respective symbolic names */ -struct symbolic_list { - int num; - char *name; -}; - -#define NOT_DEFINED_STR "Unknown" - -/* Returns the name of the matching element in the symbolic_list array. The - * end of the list must be marked with an element that has a NULL name. - */ -static inline char * -symbolic(struct symbolic_list list[], int num) -{ - int i; - - for (i = 0; list[i].name != NULL; i++) - if (list[i].num == num) - return (list[i].name); - - return (NOT_DEFINED_STR); -} - -/* Compression stuff */ - -#define OV511_QUANTABLESIZE 64 -#define OV518_QUANTABLESIZE 32 - -#define OV511_YQUANTABLE { \ - 0, 1, 1, 2, 2, 3, 3, 4, \ - 1, 1, 1, 2, 2, 3, 4, 4, \ - 1, 1, 2, 2, 3, 4, 4, 4, \ - 2, 2, 2, 3, 4, 4, 4, 4, \ - 2, 2, 3, 4, 4, 5, 5, 5, \ - 3, 3, 4, 4, 5, 5, 5, 5, \ - 3, 4, 4, 4, 5, 5, 5, 5, \ - 4, 4, 4, 4, 5, 5, 5, 5 \ -} - -#define OV511_UVQUANTABLE { \ - 0, 2, 2, 3, 4, 4, 4, 4, \ - 2, 2, 2, 4, 4, 4, 4, 4, \ - 2, 2, 3, 4, 4, 4, 4, 4, \ - 3, 4, 4, 4, 4, 4, 4, 4, \ - 4, 4, 4, 4, 4, 4, 4, 4, \ - 4, 4, 4, 4, 4, 4, 4, 4, \ - 4, 4, 4, 4, 4, 4, 4, 4, \ - 4, 4, 4, 4, 4, 4, 4, 4 \ -} - -#define OV518_YQUANTABLE { \ - 5, 4, 5, 6, 6, 7, 7, 7, \ - 5, 5, 5, 5, 6, 7, 7, 7, \ - 6, 6, 6, 6, 7, 7, 7, 8, \ - 7, 7, 6, 7, 7, 7, 8, 8 \ -} - -#define OV518_UVQUANTABLE { \ - 6, 6, 6, 7, 7, 7, 7, 7, \ - 6, 6, 6, 7, 7, 7, 7, 7, \ - 6, 6, 6, 7, 7, 7, 7, 8, \ - 7, 7, 7, 7, 7, 7, 8, 8 \ -} - -#endif diff --git a/drivers/media/video/ov772x.c b/drivers/media/video/ov772x.c index 34034a71021..25eb5d637ee 100644 --- a/drivers/media/video/ov772x.c +++ b/drivers/media/video/ov772x.c @@ -440,21 +440,21 @@ static const struct regval_list ov772x_vga_regs[] = { */ static const struct ov772x_color_format ov772x_cfmts[] = { { - .code = V4L2_MBUS_FMT_YUYV8_2X8_LE, + .code = V4L2_MBUS_FMT_YUYV8_2X8, .colorspace = V4L2_COLORSPACE_JPEG, .dsp3 = 0x0, .com3 = SWAP_YUV, .com7 = OFMT_YUV, }, { - .code = V4L2_MBUS_FMT_YVYU8_2X8_LE, + .code = V4L2_MBUS_FMT_YVYU8_2X8, .colorspace = V4L2_COLORSPACE_JPEG, .dsp3 = UV_ON, .com3 = SWAP_YUV, .com7 = OFMT_YUV, }, { - .code = V4L2_MBUS_FMT_YUYV8_2X8_BE, + .code = V4L2_MBUS_FMT_UYVY8_2X8, .colorspace = V4L2_COLORSPACE_JPEG, .dsp3 = 0x0, .com3 = 0x0, @@ -960,7 +960,7 @@ static int ov772x_g_fmt(struct v4l2_subdev *sd, if (!priv->win || !priv->cfmt) { u32 width = VGA_WIDTH, height = VGA_HEIGHT; int ret = ov772x_set_params(client, &width, &height, - V4L2_MBUS_FMT_YUYV8_2X8_LE); + V4L2_MBUS_FMT_YUYV8_2X8); if (ret < 0) return ret; } diff --git a/drivers/media/video/ov9640.c b/drivers/media/video/ov9640.c index 7ce9e05b478..40cdfab74cc 100644 --- a/drivers/media/video/ov9640.c +++ b/drivers/media/video/ov9640.c @@ -155,7 +155,7 @@ static const struct ov9640_reg ov9640_regs_rgb[] = { }; static enum v4l2_mbus_pixelcode ov9640_codes[] = { - V4L2_MBUS_FMT_YUYV8_2X8_BE, + V4L2_MBUS_FMT_UYVY8_2X8, V4L2_MBUS_FMT_RGB555_2X8_PADHI_LE, V4L2_MBUS_FMT_RGB565_2X8_LE, }; @@ -430,7 +430,7 @@ static void ov9640_alter_regs(enum v4l2_mbus_pixelcode code, { switch (code) { default: - case V4L2_MBUS_FMT_YUYV8_2X8_BE: + case V4L2_MBUS_FMT_UYVY8_2X8: alt->com12 = OV9640_COM12_YUV_AVG; alt->com13 = OV9640_COM13_Y_DELAY_EN | OV9640_COM13_YUV_DLY(0x01); @@ -493,7 +493,7 @@ static int ov9640_write_regs(struct i2c_client *client, u32 width, } /* select color matrix configuration for given color encoding */ - if (code == V4L2_MBUS_FMT_YUYV8_2X8_BE) { + if (code == V4L2_MBUS_FMT_UYVY8_2X8) { matrix_regs = ov9640_regs_yuv; matrix_regs_len = ARRAY_SIZE(ov9640_regs_yuv); } else { @@ -579,8 +579,8 @@ static int ov9640_s_fmt(struct v4l2_subdev *sd, cspace = V4L2_COLORSPACE_SRGB; break; default: - code = V4L2_MBUS_FMT_YUYV8_2X8_BE; - case V4L2_MBUS_FMT_YUYV8_2X8_BE: + code = V4L2_MBUS_FMT_UYVY8_2X8; + case V4L2_MBUS_FMT_UYVY8_2X8: cspace = V4L2_COLORSPACE_JPEG; } @@ -606,8 +606,8 @@ static int ov9640_try_fmt(struct v4l2_subdev *sd, mf->colorspace = V4L2_COLORSPACE_SRGB; break; default: - mf->code = V4L2_MBUS_FMT_YUYV8_2X8_BE; - case V4L2_MBUS_FMT_YUYV8_2X8_BE: + mf->code = V4L2_MBUS_FMT_UYVY8_2X8; + case V4L2_MBUS_FMT_UYVY8_2X8: mf->colorspace = V4L2_COLORSPACE_JPEG; } diff --git a/drivers/media/video/ovcamchip/Makefile b/drivers/media/video/ovcamchip/Makefile deleted file mode 100644 index cba4cdf20f4..00000000000 --- a/drivers/media/video/ovcamchip/Makefile +++ /dev/null @@ -1,4 +0,0 @@ -ovcamchip-objs := ovcamchip_core.o ov6x20.o ov6x30.o ov7x10.o ov7x20.o \ - ov76be.o - -obj-$(CONFIG_VIDEO_OVCAMCHIP) += ovcamchip.o diff --git a/drivers/media/video/ovcamchip/ov6x20.c b/drivers/media/video/ovcamchip/ov6x20.c deleted file mode 100644 index c04130dab12..00000000000 --- a/drivers/media/video/ovcamchip/ov6x20.c +++ /dev/null @@ -1,414 +0,0 @@ -/* OmniVision OV6620/OV6120 Camera Chip Support Code - * - * Copyright (c) 1999-2004 Mark McClelland <mark@alpha.dyndns.org> - * http://alpha.dyndns.org/ov511/ - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. NO WARRANTY OF ANY KIND is expressed or implied. - */ - -#define DEBUG - -#include <linux/slab.h> -#include "ovcamchip_priv.h" - -/* Registers */ -#define REG_GAIN 0x00 /* gain [5:0] */ -#define REG_BLUE 0x01 /* blue gain */ -#define REG_RED 0x02 /* red gain */ -#define REG_SAT 0x03 /* saturation */ -#define REG_CNT 0x05 /* Y contrast */ -#define REG_BRT 0x06 /* Y brightness */ -#define REG_WB_BLUE 0x0C /* WB blue ratio [5:0] */ -#define REG_WB_RED 0x0D /* WB red ratio [5:0] */ -#define REG_EXP 0x10 /* exposure */ - -/* Window parameters */ -#define HWSBASE 0x38 -#define HWEBASE 0x3A -#define VWSBASE 0x05 -#define VWEBASE 0x06 - -struct ov6x20 { - int auto_brt; - int auto_exp; - int backlight; - int bandfilt; - int mirror; -}; - -/* Initial values for use with OV511/OV511+ cameras */ -static struct ovcamchip_regvals regvals_init_6x20_511[] = { - { 0x12, 0x80 }, /* reset */ - { 0x11, 0x01 }, - { 0x03, 0x60 }, - { 0x05, 0x7f }, /* For when autoadjust is off */ - { 0x07, 0xa8 }, - { 0x0c, 0x24 }, - { 0x0d, 0x24 }, - { 0x0f, 0x15 }, /* COMS */ - { 0x10, 0x75 }, /* AEC Exposure time */ - { 0x12, 0x24 }, /* Enable AGC and AWB */ - { 0x14, 0x04 }, - { 0x16, 0x03 }, - { 0x26, 0xb2 }, /* BLC enable */ - /* 0x28: 0x05 Selects RGB format if RGB on */ - { 0x28, 0x05 }, - { 0x2a, 0x04 }, /* Disable framerate adjust */ - { 0x2d, 0x99 }, - { 0x33, 0xa0 }, /* Color Processing Parameter */ - { 0x34, 0xd2 }, /* Max A/D range */ - { 0x38, 0x8b }, - { 0x39, 0x40 }, - - { 0x3c, 0x39 }, /* Enable AEC mode changing */ - { 0x3c, 0x3c }, /* Change AEC mode */ - { 0x3c, 0x24 }, /* Disable AEC mode changing */ - - { 0x3d, 0x80 }, - /* These next two registers (0x4a, 0x4b) are undocumented. They - * control the color balance */ - { 0x4a, 0x80 }, - { 0x4b, 0x80 }, - { 0x4d, 0xd2 }, /* This reduces noise a bit */ - { 0x4e, 0xc1 }, - { 0x4f, 0x04 }, - { 0xff, 0xff }, /* END MARKER */ -}; - -/* Initial values for use with OV518 cameras */ -static struct ovcamchip_regvals regvals_init_6x20_518[] = { - { 0x12, 0x80 }, /* Do a reset */ - { 0x03, 0xc0 }, /* Saturation */ - { 0x05, 0x8a }, /* Contrast */ - { 0x0c, 0x24 }, /* AWB blue */ - { 0x0d, 0x24 }, /* AWB red */ - { 0x0e, 0x8d }, /* Additional 2x gain */ - { 0x0f, 0x25 }, /* Black expanding level = 1.3V */ - { 0x11, 0x01 }, /* Clock div. */ - { 0x12, 0x24 }, /* Enable AGC and AWB */ - { 0x13, 0x01 }, /* (default) */ - { 0x14, 0x80 }, /* Set reserved bit 7 */ - { 0x15, 0x01 }, /* (default) */ - { 0x16, 0x03 }, /* (default) */ - { 0x17, 0x38 }, /* (default) */ - { 0x18, 0xea }, /* (default) */ - { 0x19, 0x04 }, - { 0x1a, 0x93 }, - { 0x1b, 0x00 }, /* (default) */ - { 0x1e, 0xc4 }, /* (default) */ - { 0x1f, 0x04 }, /* (default) */ - { 0x20, 0x20 }, /* Enable 1st stage aperture correction */ - { 0x21, 0x10 }, /* Y offset */ - { 0x22, 0x88 }, /* U offset */ - { 0x23, 0xc0 }, /* Set XTAL power level */ - { 0x24, 0x53 }, /* AEC bright ratio */ - { 0x25, 0x7a }, /* AEC black ratio */ - { 0x26, 0xb2 }, /* BLC enable */ - { 0x27, 0xa2 }, /* Full output range */ - { 0x28, 0x01 }, /* (default) */ - { 0x29, 0x00 }, /* (default) */ - { 0x2a, 0x84 }, /* (default) */ - { 0x2b, 0xa8 }, /* Set custom frame rate */ - { 0x2c, 0xa0 }, /* (reserved) */ - { 0x2d, 0x95 }, /* Enable banding filter */ - { 0x2e, 0x88 }, /* V offset */ - { 0x33, 0x22 }, /* Luminance gamma on */ - { 0x34, 0xc7 }, /* A/D bias */ - { 0x36, 0x12 }, /* (reserved) */ - { 0x37, 0x63 }, /* (reserved) */ - { 0x38, 0x8b }, /* Quick AEC/AEB */ - { 0x39, 0x00 }, /* (default) */ - { 0x3a, 0x0f }, /* (default) */ - { 0x3b, 0x3c }, /* (default) */ - { 0x3c, 0x5c }, /* AEC controls */ - { 0x3d, 0x80 }, /* Drop 1 (bad) frame when AEC change */ - { 0x3e, 0x80 }, /* (default) */ - { 0x3f, 0x02 }, /* (default) */ - { 0x40, 0x10 }, /* (reserved) */ - { 0x41, 0x10 }, /* (reserved) */ - { 0x42, 0x00 }, /* (reserved) */ - { 0x43, 0x7f }, /* (reserved) */ - { 0x44, 0x80 }, /* (reserved) */ - { 0x45, 0x1c }, /* (reserved) */ - { 0x46, 0x1c }, /* (reserved) */ - { 0x47, 0x80 }, /* (reserved) */ - { 0x48, 0x5f }, /* (reserved) */ - { 0x49, 0x00 }, /* (reserved) */ - { 0x4a, 0x00 }, /* Color balance (undocumented) */ - { 0x4b, 0x80 }, /* Color balance (undocumented) */ - { 0x4c, 0x58 }, /* (reserved) */ - { 0x4d, 0xd2 }, /* U *= .938, V *= .838 */ - { 0x4e, 0xa0 }, /* (default) */ - { 0x4f, 0x04 }, /* UV 3-point average */ - { 0x50, 0xff }, /* (reserved) */ - { 0x51, 0x58 }, /* (reserved) */ - { 0x52, 0xc0 }, /* (reserved) */ - { 0x53, 0x42 }, /* (reserved) */ - { 0x27, 0xa6 }, /* Enable manual offset adj. (reg 21 & 22) */ - { 0x12, 0x20 }, - { 0x12, 0x24 }, - - { 0xff, 0xff }, /* END MARKER */ -}; - -/* This initializes the OV6x20 camera chip and relevant variables. */ -static int ov6x20_init(struct i2c_client *c) -{ - struct ovcamchip *ov = i2c_get_clientdata(c); - struct ov6x20 *s; - int rc; - - DDEBUG(4, &c->dev, "entered"); - - switch (c->adapter->id) { - case I2C_HW_SMBUS_OV511: - rc = ov_write_regvals(c, regvals_init_6x20_511); - break; - case I2C_HW_SMBUS_OV518: - rc = ov_write_regvals(c, regvals_init_6x20_518); - break; - default: - dev_err(&c->dev, "ov6x20: Unsupported adapter\n"); - rc = -ENODEV; - } - - if (rc < 0) - return rc; - - ov->spriv = s = kzalloc(sizeof *s, GFP_KERNEL); - if (!s) - return -ENOMEM; - - s->auto_brt = 1; - s->auto_exp = 1; - - return rc; -} - -static int ov6x20_free(struct i2c_client *c) -{ - struct ovcamchip *ov = i2c_get_clientdata(c); - - kfree(ov->spriv); - return 0; -} - -static int ov6x20_set_control(struct i2c_client *c, - struct ovcamchip_control *ctl) -{ - struct ovcamchip *ov = i2c_get_clientdata(c); - struct ov6x20 *s = ov->spriv; - int rc; - int v = ctl->value; - - switch (ctl->id) { - case OVCAMCHIP_CID_CONT: - rc = ov_write(c, REG_CNT, v >> 8); - break; - case OVCAMCHIP_CID_BRIGHT: - rc = ov_write(c, REG_BRT, v >> 8); - break; - case OVCAMCHIP_CID_SAT: - rc = ov_write(c, REG_SAT, v >> 8); - break; - case OVCAMCHIP_CID_HUE: - rc = ov_write(c, REG_RED, 0xFF - (v >> 8)); - if (rc < 0) - goto out; - - rc = ov_write(c, REG_BLUE, v >> 8); - break; - case OVCAMCHIP_CID_EXP: - rc = ov_write(c, REG_EXP, v); - break; - case OVCAMCHIP_CID_FREQ: - { - int sixty = (v == 60); - - rc = ov_write(c, 0x2b, sixty?0xa8:0x28); - if (rc < 0) - goto out; - - rc = ov_write(c, 0x2a, sixty?0x84:0xa4); - break; - } - case OVCAMCHIP_CID_BANDFILT: - rc = ov_write_mask(c, 0x2d, v?0x04:0x00, 0x04); - s->bandfilt = v; - break; - case OVCAMCHIP_CID_AUTOBRIGHT: - rc = ov_write_mask(c, 0x2d, v?0x10:0x00, 0x10); - s->auto_brt = v; - break; - case OVCAMCHIP_CID_AUTOEXP: - rc = ov_write_mask(c, 0x13, v?0x01:0x00, 0x01); - s->auto_exp = v; - break; - case OVCAMCHIP_CID_BACKLIGHT: - { - rc = ov_write_mask(c, 0x4e, v?0xe0:0xc0, 0xe0); - if (rc < 0) - goto out; - - rc = ov_write_mask(c, 0x29, v?0x08:0x00, 0x08); - if (rc < 0) - goto out; - - rc = ov_write_mask(c, 0x0e, v?0x80:0x00, 0x80); - s->backlight = v; - break; - } - case OVCAMCHIP_CID_MIRROR: - rc = ov_write_mask(c, 0x12, v?0x40:0x00, 0x40); - s->mirror = v; - break; - default: - DDEBUG(2, &c->dev, "control not supported: %d", ctl->id); - return -EPERM; - } - -out: - DDEBUG(3, &c->dev, "id=%d, arg=%d, rc=%d", ctl->id, v, rc); - return rc; -} - -static int ov6x20_get_control(struct i2c_client *c, - struct ovcamchip_control *ctl) -{ - struct ovcamchip *ov = i2c_get_clientdata(c); - struct ov6x20 *s = ov->spriv; - int rc = 0; - unsigned char val = 0; - - switch (ctl->id) { - case OVCAMCHIP_CID_CONT: - rc = ov_read(c, REG_CNT, &val); - ctl->value = val << 8; - break; - case OVCAMCHIP_CID_BRIGHT: - rc = ov_read(c, REG_BRT, &val); - ctl->value = val << 8; - break; - case OVCAMCHIP_CID_SAT: - rc = ov_read(c, REG_SAT, &val); - ctl->value = val << 8; - break; - case OVCAMCHIP_CID_HUE: - rc = ov_read(c, REG_BLUE, &val); - ctl->value = val << 8; - break; - case OVCAMCHIP_CID_EXP: - rc = ov_read(c, REG_EXP, &val); - ctl->value = val; - break; - case OVCAMCHIP_CID_BANDFILT: - ctl->value = s->bandfilt; - break; - case OVCAMCHIP_CID_AUTOBRIGHT: - ctl->value = s->auto_brt; - break; - case OVCAMCHIP_CID_AUTOEXP: - ctl->value = s->auto_exp; - break; - case OVCAMCHIP_CID_BACKLIGHT: - ctl->value = s->backlight; - break; - case OVCAMCHIP_CID_MIRROR: - ctl->value = s->mirror; - break; - default: - DDEBUG(2, &c->dev, "control not supported: %d", ctl->id); - return -EPERM; - } - - DDEBUG(3, &c->dev, "id=%d, arg=%d, rc=%d", ctl->id, ctl->value, rc); - return rc; -} - -static int ov6x20_mode_init(struct i2c_client *c, struct ovcamchip_window *win) -{ - /******** QCIF-specific regs ********/ - - ov_write(c, 0x14, win->quarter?0x24:0x04); - - /******** Palette-specific regs ********/ - - /* OV518 needs 8 bit multiplexed in color mode, and 16 bit in B&W */ - if (c->adapter->id == I2C_HW_SMBUS_OV518) { - if (win->format == VIDEO_PALETTE_GREY) - ov_write_mask(c, 0x13, 0x00, 0x20); - else - ov_write_mask(c, 0x13, 0x20, 0x20); - } else { - if (win->format == VIDEO_PALETTE_GREY) - ov_write_mask(c, 0x13, 0x20, 0x20); - else - ov_write_mask(c, 0x13, 0x00, 0x20); - } - - /******** Clock programming ********/ - - /* The OV6620 needs special handling. This prevents the - * severe banding that normally occurs */ - - /* Clock down */ - ov_write(c, 0x2a, 0x04); - - ov_write(c, 0x11, win->clockdiv); - - ov_write(c, 0x2a, 0x84); - /* This next setting is critical. It seems to improve - * the gain or the contrast. The "reserved" bits seem - * to have some effect in this case. */ - ov_write(c, 0x2d, 0x85); /* FIXME: This messes up banding filter */ - - return 0; -} - -static int ov6x20_set_window(struct i2c_client *c, struct ovcamchip_window *win) -{ - int ret, hwscale, vwscale; - - ret = ov6x20_mode_init(c, win); - if (ret < 0) - return ret; - - if (win->quarter) { - hwscale = 0; - vwscale = 0; - } else { - hwscale = 1; - vwscale = 1; /* The datasheet says 0; it's wrong */ - } - - ov_write(c, 0x17, HWSBASE + (win->x >> hwscale)); - ov_write(c, 0x18, HWEBASE + ((win->x + win->width) >> hwscale)); - ov_write(c, 0x19, VWSBASE + (win->y >> vwscale)); - ov_write(c, 0x1a, VWEBASE + ((win->y + win->height) >> vwscale)); - - return 0; -} - -static int ov6x20_command(struct i2c_client *c, unsigned int cmd, void *arg) -{ - switch (cmd) { - case OVCAMCHIP_CMD_S_CTRL: - return ov6x20_set_control(c, arg); - case OVCAMCHIP_CMD_G_CTRL: - return ov6x20_get_control(c, arg); - case OVCAMCHIP_CMD_S_MODE: - return ov6x20_set_window(c, arg); - default: - DDEBUG(2, &c->dev, "command not supported: %d", cmd); - return -ENOIOCTLCMD; - } -} - -struct ovcamchip_ops ov6x20_ops = { - .init = ov6x20_init, - .free = ov6x20_free, - .command = ov6x20_command, -}; diff --git a/drivers/media/video/ovcamchip/ov6x30.c b/drivers/media/video/ovcamchip/ov6x30.c deleted file mode 100644 index 73b94f51a85..00000000000 --- a/drivers/media/video/ovcamchip/ov6x30.c +++ /dev/null @@ -1,373 +0,0 @@ -/* OmniVision OV6630/OV6130 Camera Chip Support Code - * - * Copyright (c) 1999-2004 Mark McClelland <mark@alpha.dyndns.org> - * http://alpha.dyndns.org/ov511/ - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. NO WARRANTY OF ANY KIND is expressed or implied. - */ - -#define DEBUG - -#include <linux/slab.h> -#include "ovcamchip_priv.h" - -/* Registers */ -#define REG_GAIN 0x00 /* gain [5:0] */ -#define REG_BLUE 0x01 /* blue gain */ -#define REG_RED 0x02 /* red gain */ -#define REG_SAT 0x03 /* saturation [7:3] */ -#define REG_CNT 0x05 /* Y contrast [3:0] */ -#define REG_BRT 0x06 /* Y brightness */ -#define REG_SHARP 0x07 /* sharpness */ -#define REG_WB_BLUE 0x0C /* WB blue ratio [5:0] */ -#define REG_WB_RED 0x0D /* WB red ratio [5:0] */ -#define REG_EXP 0x10 /* exposure */ - -/* Window parameters */ -#define HWSBASE 0x38 -#define HWEBASE 0x3A -#define VWSBASE 0x05 -#define VWEBASE 0x06 - -struct ov6x30 { - int auto_brt; - int auto_exp; - int backlight; - int bandfilt; - int mirror; -}; - -static struct ovcamchip_regvals regvals_init_6x30[] = { - { 0x12, 0x80 }, /* reset */ - { 0x00, 0x1f }, /* Gain */ - { 0x01, 0x99 }, /* Blue gain */ - { 0x02, 0x7c }, /* Red gain */ - { 0x03, 0xc0 }, /* Saturation */ - { 0x05, 0x0a }, /* Contrast */ - { 0x06, 0x95 }, /* Brightness */ - { 0x07, 0x2d }, /* Sharpness */ - { 0x0c, 0x20 }, - { 0x0d, 0x20 }, - { 0x0e, 0x20 }, - { 0x0f, 0x05 }, - { 0x10, 0x9a }, /* "exposure check" */ - { 0x11, 0x00 }, /* Pixel clock = fastest */ - { 0x12, 0x24 }, /* Enable AGC and AWB */ - { 0x13, 0x21 }, - { 0x14, 0x80 }, - { 0x15, 0x01 }, - { 0x16, 0x03 }, - { 0x17, 0x38 }, - { 0x18, 0xea }, - { 0x19, 0x04 }, - { 0x1a, 0x93 }, - { 0x1b, 0x00 }, - { 0x1e, 0xc4 }, - { 0x1f, 0x04 }, - { 0x20, 0x20 }, - { 0x21, 0x10 }, - { 0x22, 0x88 }, - { 0x23, 0xc0 }, /* Crystal circuit power level */ - { 0x25, 0x9a }, /* Increase AEC black pixel ratio */ - { 0x26, 0xb2 }, /* BLC enable */ - { 0x27, 0xa2 }, - { 0x28, 0x00 }, - { 0x29, 0x00 }, - { 0x2a, 0x84 }, /* (keep) */ - { 0x2b, 0xa8 }, /* (keep) */ - { 0x2c, 0xa0 }, - { 0x2d, 0x95 }, /* Enable auto-brightness */ - { 0x2e, 0x88 }, - { 0x33, 0x26 }, - { 0x34, 0x03 }, - { 0x36, 0x8f }, - { 0x37, 0x80 }, - { 0x38, 0x83 }, - { 0x39, 0x80 }, - { 0x3a, 0x0f }, - { 0x3b, 0x3c }, - { 0x3c, 0x1a }, - { 0x3d, 0x80 }, - { 0x3e, 0x80 }, - { 0x3f, 0x0e }, - { 0x40, 0x00 }, /* White bal */ - { 0x41, 0x00 }, /* White bal */ - { 0x42, 0x80 }, - { 0x43, 0x3f }, /* White bal */ - { 0x44, 0x80 }, - { 0x45, 0x20 }, - { 0x46, 0x20 }, - { 0x47, 0x80 }, - { 0x48, 0x7f }, - { 0x49, 0x00 }, - { 0x4a, 0x00 }, - { 0x4b, 0x80 }, - { 0x4c, 0xd0 }, - { 0x4d, 0x10 }, /* U = 0.563u, V = 0.714v */ - { 0x4e, 0x40 }, - { 0x4f, 0x07 }, /* UV average mode, color killer: strongest */ - { 0x50, 0xff }, - { 0x54, 0x23 }, /* Max AGC gain: 18dB */ - { 0x55, 0xff }, - { 0x56, 0x12 }, - { 0x57, 0x81 }, /* (default) */ - { 0x58, 0x75 }, - { 0x59, 0x01 }, /* AGC dark current compensation: +1 */ - { 0x5a, 0x2c }, - { 0x5b, 0x0f }, /* AWB chrominance levels */ - { 0x5c, 0x10 }, - { 0x3d, 0x80 }, - { 0x27, 0xa6 }, - /* Toggle AWB off and on */ - { 0x12, 0x20 }, - { 0x12, 0x24 }, - - { 0xff, 0xff }, /* END MARKER */ -}; - -/* This initializes the OV6x30 camera chip and relevant variables. */ -static int ov6x30_init(struct i2c_client *c) -{ - struct ovcamchip *ov = i2c_get_clientdata(c); - struct ov6x30 *s; - int rc; - - DDEBUG(4, &c->dev, "entered"); - - rc = ov_write_regvals(c, regvals_init_6x30); - if (rc < 0) - return rc; - - ov->spriv = s = kzalloc(sizeof *s, GFP_KERNEL); - if (!s) - return -ENOMEM; - - s->auto_brt = 1; - s->auto_exp = 1; - - return rc; -} - -static int ov6x30_free(struct i2c_client *c) -{ - struct ovcamchip *ov = i2c_get_clientdata(c); - - kfree(ov->spriv); - return 0; -} - -static int ov6x30_set_control(struct i2c_client *c, - struct ovcamchip_control *ctl) -{ - struct ovcamchip *ov = i2c_get_clientdata(c); - struct ov6x30 *s = ov->spriv; - int rc; - int v = ctl->value; - - switch (ctl->id) { - case OVCAMCHIP_CID_CONT: - rc = ov_write_mask(c, REG_CNT, v >> 12, 0x0f); - break; - case OVCAMCHIP_CID_BRIGHT: - rc = ov_write(c, REG_BRT, v >> 8); - break; - case OVCAMCHIP_CID_SAT: - rc = ov_write(c, REG_SAT, v >> 8); - break; - case OVCAMCHIP_CID_HUE: - rc = ov_write(c, REG_RED, 0xFF - (v >> 8)); - if (rc < 0) - goto out; - - rc = ov_write(c, REG_BLUE, v >> 8); - break; - case OVCAMCHIP_CID_EXP: - rc = ov_write(c, REG_EXP, v); - break; - case OVCAMCHIP_CID_FREQ: - { - int sixty = (v == 60); - - rc = ov_write(c, 0x2b, sixty?0xa8:0x28); - if (rc < 0) - goto out; - - rc = ov_write(c, 0x2a, sixty?0x84:0xa4); - break; - } - case OVCAMCHIP_CID_BANDFILT: - rc = ov_write_mask(c, 0x2d, v?0x04:0x00, 0x04); - s->bandfilt = v; - break; - case OVCAMCHIP_CID_AUTOBRIGHT: - rc = ov_write_mask(c, 0x2d, v?0x10:0x00, 0x10); - s->auto_brt = v; - break; - case OVCAMCHIP_CID_AUTOEXP: - rc = ov_write_mask(c, 0x28, v?0x00:0x10, 0x10); - s->auto_exp = v; - break; - case OVCAMCHIP_CID_BACKLIGHT: - { - rc = ov_write_mask(c, 0x4e, v?0x80:0x60, 0xe0); - if (rc < 0) - goto out; - - rc = ov_write_mask(c, 0x29, v?0x08:0x00, 0x08); - if (rc < 0) - goto out; - - rc = ov_write_mask(c, 0x28, v?0x02:0x00, 0x02); - s->backlight = v; - break; - } - case OVCAMCHIP_CID_MIRROR: - rc = ov_write_mask(c, 0x12, v?0x40:0x00, 0x40); - s->mirror = v; - break; - default: - DDEBUG(2, &c->dev, "control not supported: %d", ctl->id); - return -EPERM; - } - -out: - DDEBUG(3, &c->dev, "id=%d, arg=%d, rc=%d", ctl->id, v, rc); - return rc; -} - -static int ov6x30_get_control(struct i2c_client *c, - struct ovcamchip_control *ctl) -{ - struct ovcamchip *ov = i2c_get_clientdata(c); - struct ov6x30 *s = ov->spriv; - int rc = 0; - unsigned char val = 0; - - switch (ctl->id) { - case OVCAMCHIP_CID_CONT: - rc = ov_read(c, REG_CNT, &val); - ctl->value = (val & 0x0f) << 12; - break; - case OVCAMCHIP_CID_BRIGHT: - rc = ov_read(c, REG_BRT, &val); - ctl->value = val << 8; - break; - case OVCAMCHIP_CID_SAT: - rc = ov_read(c, REG_SAT, &val); - ctl->value = val << 8; - break; - case OVCAMCHIP_CID_HUE: - rc = ov_read(c, REG_BLUE, &val); - ctl->value = val << 8; - break; - case OVCAMCHIP_CID_EXP: - rc = ov_read(c, REG_EXP, &val); - ctl->value = val; - break; - case OVCAMCHIP_CID_BANDFILT: - ctl->value = s->bandfilt; - break; - case OVCAMCHIP_CID_AUTOBRIGHT: - ctl->value = s->auto_brt; - break; - case OVCAMCHIP_CID_AUTOEXP: - ctl->value = s->auto_exp; - break; - case OVCAMCHIP_CID_BACKLIGHT: - ctl->value = s->backlight; - break; - case OVCAMCHIP_CID_MIRROR: - ctl->value = s->mirror; - break; - default: - DDEBUG(2, &c->dev, "control not supported: %d", ctl->id); - return -EPERM; - } - - DDEBUG(3, &c->dev, "id=%d, arg=%d, rc=%d", ctl->id, ctl->value, rc); - return rc; -} - -static int ov6x30_mode_init(struct i2c_client *c, struct ovcamchip_window *win) -{ - /******** QCIF-specific regs ********/ - - ov_write_mask(c, 0x14, win->quarter?0x20:0x00, 0x20); - - /******** Palette-specific regs ********/ - - if (win->format == VIDEO_PALETTE_GREY) { - if (c->adapter->id == I2C_HW_SMBUS_OV518) { - /* Do nothing - we're already in 8-bit mode */ - } else { - ov_write_mask(c, 0x13, 0x20, 0x20); - } - } else { - /* The OV518 needs special treatment. Although both the OV518 - * and the OV6630 support a 16-bit video bus, only the 8 bit Y - * bus is actually used. The UV bus is tied to ground. - * Therefore, the OV6630 needs to be in 8-bit multiplexed - * output mode */ - - if (c->adapter->id == I2C_HW_SMBUS_OV518) { - /* Do nothing - we want to stay in 8-bit mode */ - /* Warning: Messing with reg 0x13 breaks OV518 color */ - } else { - ov_write_mask(c, 0x13, 0x00, 0x20); - } - } - - /******** Clock programming ********/ - - ov_write(c, 0x11, win->clockdiv); - - return 0; -} - -static int ov6x30_set_window(struct i2c_client *c, struct ovcamchip_window *win) -{ - int ret, hwscale, vwscale; - - ret = ov6x30_mode_init(c, win); - if (ret < 0) - return ret; - - if (win->quarter) { - hwscale = 0; - vwscale = 0; - } else { - hwscale = 1; - vwscale = 1; /* The datasheet says 0; it's wrong */ - } - - ov_write(c, 0x17, HWSBASE + (win->x >> hwscale)); - ov_write(c, 0x18, HWEBASE + ((win->x + win->width) >> hwscale)); - ov_write(c, 0x19, VWSBASE + (win->y >> vwscale)); - ov_write(c, 0x1a, VWEBASE + ((win->y + win->height) >> vwscale)); - - return 0; -} - -static int ov6x30_command(struct i2c_client *c, unsigned int cmd, void *arg) -{ - switch (cmd) { - case OVCAMCHIP_CMD_S_CTRL: - return ov6x30_set_control(c, arg); - case OVCAMCHIP_CMD_G_CTRL: - return ov6x30_get_control(c, arg); - case OVCAMCHIP_CMD_S_MODE: - return ov6x30_set_window(c, arg); - default: - DDEBUG(2, &c->dev, "command not supported: %d", cmd); - return -ENOIOCTLCMD; - } -} - -struct ovcamchip_ops ov6x30_ops = { - .init = ov6x30_init, - .free = ov6x30_free, - .command = ov6x30_command, -}; diff --git a/drivers/media/video/ovcamchip/ov76be.c b/drivers/media/video/ovcamchip/ov76be.c deleted file mode 100644 index 11f6be924d8..00000000000 --- a/drivers/media/video/ovcamchip/ov76be.c +++ /dev/null @@ -1,302 +0,0 @@ -/* OmniVision OV76BE Camera Chip Support Code - * - * Copyright (c) 1999-2004 Mark McClelland <mark@alpha.dyndns.org> - * http://alpha.dyndns.org/ov511/ - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. NO WARRANTY OF ANY KIND is expressed or implied. - */ - -#define DEBUG - -#include <linux/slab.h> -#include "ovcamchip_priv.h" - -/* OV7610 registers: Since the OV76BE is undocumented, we'll settle for these - * for now. */ -#define REG_GAIN 0x00 /* gain [5:0] */ -#define REG_BLUE 0x01 /* blue channel balance */ -#define REG_RED 0x02 /* red channel balance */ -#define REG_SAT 0x03 /* saturation */ -#define REG_CNT 0x05 /* Y contrast */ -#define REG_BRT 0x06 /* Y brightness */ -#define REG_BLUE_BIAS 0x0C /* blue channel bias [5:0] */ -#define REG_RED_BIAS 0x0D /* red channel bias [5:0] */ -#define REG_GAMMA_COEFF 0x0E /* gamma settings */ -#define REG_WB_RANGE 0x0F /* AEC/ALC/S-AWB settings */ -#define REG_EXP 0x10 /* manual exposure setting */ -#define REG_CLOCK 0x11 /* polarity/clock prescaler */ -#define REG_FIELD_DIVIDE 0x16 /* field interval/mode settings */ -#define REG_HWIN_START 0x17 /* horizontal window start */ -#define REG_HWIN_END 0x18 /* horizontal window end */ -#define REG_VWIN_START 0x19 /* vertical window start */ -#define REG_VWIN_END 0x1A /* vertical window end */ -#define REG_PIXEL_SHIFT 0x1B /* pixel shift */ -#define REG_YOFFSET 0x21 /* Y channel offset */ -#define REG_UOFFSET 0x22 /* U channel offset */ -#define REG_ECW 0x24 /* exposure white level for AEC */ -#define REG_ECB 0x25 /* exposure black level for AEC */ -#define REG_FRAMERATE_H 0x2A /* frame rate MSB + misc */ -#define REG_FRAMERATE_L 0x2B /* frame rate LSB */ -#define REG_ALC 0x2C /* Auto Level Control settings */ -#define REG_VOFFSET 0x2E /* V channel offset adjustment */ -#define REG_ARRAY_BIAS 0x2F /* array bias -- don't change */ -#define REG_YGAMMA 0x33 /* misc gamma settings [7:6] */ -#define REG_BIAS_ADJUST 0x34 /* misc bias settings */ - -/* Window parameters */ -#define HWSBASE 0x38 -#define HWEBASE 0x3a -#define VWSBASE 0x05 -#define VWEBASE 0x05 - -struct ov76be { - int auto_brt; - int auto_exp; - int bandfilt; - int mirror; -}; - -/* NOTE: These are the same as the 7x10 settings, but should eventually be - * optimized for the OV76BE */ -static struct ovcamchip_regvals regvals_init_76be[] = { - { 0x10, 0xff }, - { 0x16, 0x03 }, - { 0x28, 0x24 }, - { 0x2b, 0xac }, - { 0x12, 0x00 }, - { 0x38, 0x81 }, - { 0x28, 0x24 }, /* 0c */ - { 0x0f, 0x85 }, /* lg's setting */ - { 0x15, 0x01 }, - { 0x20, 0x1c }, - { 0x23, 0x2a }, - { 0x24, 0x10 }, - { 0x25, 0x8a }, - { 0x26, 0xa2 }, - { 0x27, 0xc2 }, - { 0x2a, 0x04 }, - { 0x2c, 0xfe }, - { 0x2d, 0x93 }, - { 0x30, 0x71 }, - { 0x31, 0x60 }, - { 0x32, 0x26 }, - { 0x33, 0x20 }, - { 0x34, 0x48 }, - { 0x12, 0x24 }, - { 0x11, 0x01 }, - { 0x0c, 0x24 }, - { 0x0d, 0x24 }, - { 0xff, 0xff }, /* END MARKER */ -}; - -/* This initializes the OV76be camera chip and relevant variables. */ -static int ov76be_init(struct i2c_client *c) -{ - struct ovcamchip *ov = i2c_get_clientdata(c); - struct ov76be *s; - int rc; - - DDEBUG(4, &c->dev, "entered"); - - rc = ov_write_regvals(c, regvals_init_76be); - if (rc < 0) - return rc; - - ov->spriv = s = kzalloc(sizeof *s, GFP_KERNEL); - if (!s) - return -ENOMEM; - - s->auto_brt = 1; - s->auto_exp = 1; - - return rc; -} - -static int ov76be_free(struct i2c_client *c) -{ - struct ovcamchip *ov = i2c_get_clientdata(c); - - kfree(ov->spriv); - return 0; -} - -static int ov76be_set_control(struct i2c_client *c, - struct ovcamchip_control *ctl) -{ - struct ovcamchip *ov = i2c_get_clientdata(c); - struct ov76be *s = ov->spriv; - int rc; - int v = ctl->value; - - switch (ctl->id) { - case OVCAMCHIP_CID_BRIGHT: - rc = ov_write(c, REG_BRT, v >> 8); - break; - case OVCAMCHIP_CID_SAT: - rc = ov_write(c, REG_SAT, v >> 8); - break; - case OVCAMCHIP_CID_EXP: - rc = ov_write(c, REG_EXP, v); - break; - case OVCAMCHIP_CID_FREQ: - { - int sixty = (v == 60); - - rc = ov_write_mask(c, 0x2a, sixty?0x00:0x80, 0x80); - if (rc < 0) - goto out; - - rc = ov_write(c, 0x2b, sixty?0x00:0xac); - if (rc < 0) - goto out; - - rc = ov_write_mask(c, 0x76, 0x01, 0x01); - break; - } - case OVCAMCHIP_CID_BANDFILT: - rc = ov_write_mask(c, 0x2d, v?0x04:0x00, 0x04); - s->bandfilt = v; - break; - case OVCAMCHIP_CID_AUTOBRIGHT: - rc = ov_write_mask(c, 0x2d, v?0x10:0x00, 0x10); - s->auto_brt = v; - break; - case OVCAMCHIP_CID_AUTOEXP: - rc = ov_write_mask(c, 0x13, v?0x01:0x00, 0x01); - s->auto_exp = v; - break; - case OVCAMCHIP_CID_MIRROR: - rc = ov_write_mask(c, 0x12, v?0x40:0x00, 0x40); - s->mirror = v; - break; - default: - DDEBUG(2, &c->dev, "control not supported: %d", ctl->id); - return -EPERM; - } - -out: - DDEBUG(3, &c->dev, "id=%d, arg=%d, rc=%d", ctl->id, v, rc); - return rc; -} - -static int ov76be_get_control(struct i2c_client *c, - struct ovcamchip_control *ctl) -{ - struct ovcamchip *ov = i2c_get_clientdata(c); - struct ov76be *s = ov->spriv; - int rc = 0; - unsigned char val = 0; - - switch (ctl->id) { - case OVCAMCHIP_CID_BRIGHT: - rc = ov_read(c, REG_BRT, &val); - ctl->value = val << 8; - break; - case OVCAMCHIP_CID_SAT: - rc = ov_read(c, REG_SAT, &val); - ctl->value = val << 8; - break; - case OVCAMCHIP_CID_EXP: - rc = ov_read(c, REG_EXP, &val); - ctl->value = val; - break; - case OVCAMCHIP_CID_BANDFILT: - ctl->value = s->bandfilt; - break; - case OVCAMCHIP_CID_AUTOBRIGHT: - ctl->value = s->auto_brt; - break; - case OVCAMCHIP_CID_AUTOEXP: - ctl->value = s->auto_exp; - break; - case OVCAMCHIP_CID_MIRROR: - ctl->value = s->mirror; - break; - default: - DDEBUG(2, &c->dev, "control not supported: %d", ctl->id); - return -EPERM; - } - - DDEBUG(3, &c->dev, "id=%d, arg=%d, rc=%d", ctl->id, ctl->value, rc); - return rc; -} - -static int ov76be_mode_init(struct i2c_client *c, struct ovcamchip_window *win) -{ - int qvga = win->quarter; - - /******** QVGA-specific regs ********/ - - ov_write(c, 0x14, qvga?0xa4:0x84); - - /******** Palette-specific regs ********/ - - if (win->format == VIDEO_PALETTE_GREY) { - ov_write_mask(c, 0x0e, 0x40, 0x40); - ov_write_mask(c, 0x13, 0x20, 0x20); - } else { - ov_write_mask(c, 0x0e, 0x00, 0x40); - ov_write_mask(c, 0x13, 0x00, 0x20); - } - - /******** Clock programming ********/ - - ov_write(c, 0x11, win->clockdiv); - - /******** Resolution-specific ********/ - - if (win->width == 640 && win->height == 480) - ov_write(c, 0x35, 0x9e); - else - ov_write(c, 0x35, 0x1e); - - return 0; -} - -static int ov76be_set_window(struct i2c_client *c, struct ovcamchip_window *win) -{ - int ret, hwscale, vwscale; - - ret = ov76be_mode_init(c, win); - if (ret < 0) - return ret; - - if (win->quarter) { - hwscale = 1; - vwscale = 0; - } else { - hwscale = 2; - vwscale = 1; - } - - ov_write(c, 0x17, HWSBASE + (win->x >> hwscale)); - ov_write(c, 0x18, HWEBASE + ((win->x + win->width) >> hwscale)); - ov_write(c, 0x19, VWSBASE + (win->y >> vwscale)); - ov_write(c, 0x1a, VWEBASE + ((win->y + win->height) >> vwscale)); - - return 0; -} - -static int ov76be_command(struct i2c_client *c, unsigned int cmd, void *arg) -{ - switch (cmd) { - case OVCAMCHIP_CMD_S_CTRL: - return ov76be_set_control(c, arg); - case OVCAMCHIP_CMD_G_CTRL: - return ov76be_get_control(c, arg); - case OVCAMCHIP_CMD_S_MODE: - return ov76be_set_window(c, arg); - default: - DDEBUG(2, &c->dev, "command not supported: %d", cmd); - return -ENOIOCTLCMD; - } -} - -struct ovcamchip_ops ov76be_ops = { - .init = ov76be_init, - .free = ov76be_free, - .command = ov76be_command, -}; diff --git a/drivers/media/video/ovcamchip/ov7x10.c b/drivers/media/video/ovcamchip/ov7x10.c deleted file mode 100644 index 5206e791392..00000000000 --- a/drivers/media/video/ovcamchip/ov7x10.c +++ /dev/null @@ -1,334 +0,0 @@ -/* OmniVision OV7610/OV7110 Camera Chip Support Code - * - * Copyright (c) 1999-2004 Mark McClelland <mark@alpha.dyndns.org> - * http://alpha.dyndns.org/ov511/ - * - * Color fixes by by Orion Sky Lawlor <olawlor@acm.org> (2/26/2000) - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. NO WARRANTY OF ANY KIND is expressed or implied. - */ - -#define DEBUG - -#include <linux/slab.h> -#include "ovcamchip_priv.h" - -/* Registers */ -#define REG_GAIN 0x00 /* gain [5:0] */ -#define REG_BLUE 0x01 /* blue channel balance */ -#define REG_RED 0x02 /* red channel balance */ -#define REG_SAT 0x03 /* saturation */ -#define REG_CNT 0x05 /* Y contrast */ -#define REG_BRT 0x06 /* Y brightness */ -#define REG_BLUE_BIAS 0x0C /* blue channel bias [5:0] */ -#define REG_RED_BIAS 0x0D /* red channel bias [5:0] */ -#define REG_GAMMA_COEFF 0x0E /* gamma settings */ -#define REG_WB_RANGE 0x0F /* AEC/ALC/S-AWB settings */ -#define REG_EXP 0x10 /* manual exposure setting */ -#define REG_CLOCK 0x11 /* polarity/clock prescaler */ -#define REG_FIELD_DIVIDE 0x16 /* field interval/mode settings */ -#define REG_HWIN_START 0x17 /* horizontal window start */ -#define REG_HWIN_END 0x18 /* horizontal window end */ -#define REG_VWIN_START 0x19 /* vertical window start */ -#define REG_VWIN_END 0x1A /* vertical window end */ -#define REG_PIXEL_SHIFT 0x1B /* pixel shift */ -#define REG_YOFFSET 0x21 /* Y channel offset */ -#define REG_UOFFSET 0x22 /* U channel offset */ -#define REG_ECW 0x24 /* exposure white level for AEC */ -#define REG_ECB 0x25 /* exposure black level for AEC */ -#define REG_FRAMERATE_H 0x2A /* frame rate MSB + misc */ -#define REG_FRAMERATE_L 0x2B /* frame rate LSB */ -#define REG_ALC 0x2C /* Auto Level Control settings */ -#define REG_VOFFSET 0x2E /* V channel offset adjustment */ -#define REG_ARRAY_BIAS 0x2F /* array bias -- don't change */ -#define REG_YGAMMA 0x33 /* misc gamma settings [7:6] */ -#define REG_BIAS_ADJUST 0x34 /* misc bias settings */ - -/* Window parameters */ -#define HWSBASE 0x38 -#define HWEBASE 0x3a -#define VWSBASE 0x05 -#define VWEBASE 0x05 - -struct ov7x10 { - int auto_brt; - int auto_exp; - int bandfilt; - int mirror; -}; - -/* Lawrence Glaister <lg@jfm.bc.ca> reports: - * - * Register 0x0f in the 7610 has the following effects: - * - * 0x85 (AEC method 1): Best overall, good contrast range - * 0x45 (AEC method 2): Very overexposed - * 0xa5 (spec sheet default): Ok, but the black level is - * shifted resulting in loss of contrast - * 0x05 (old driver setting): very overexposed, too much - * contrast - */ -static struct ovcamchip_regvals regvals_init_7x10[] = { - { 0x10, 0xff }, - { 0x16, 0x03 }, - { 0x28, 0x24 }, - { 0x2b, 0xac }, - { 0x12, 0x00 }, - { 0x38, 0x81 }, - { 0x28, 0x24 }, /* 0c */ - { 0x0f, 0x85 }, /* lg's setting */ - { 0x15, 0x01 }, - { 0x20, 0x1c }, - { 0x23, 0x2a }, - { 0x24, 0x10 }, - { 0x25, 0x8a }, - { 0x26, 0xa2 }, - { 0x27, 0xc2 }, - { 0x2a, 0x04 }, - { 0x2c, 0xfe }, - { 0x2d, 0x93 }, - { 0x30, 0x71 }, - { 0x31, 0x60 }, - { 0x32, 0x26 }, - { 0x33, 0x20 }, - { 0x34, 0x48 }, - { 0x12, 0x24 }, - { 0x11, 0x01 }, - { 0x0c, 0x24 }, - { 0x0d, 0x24 }, - { 0xff, 0xff }, /* END MARKER */ -}; - -/* This initializes the OV7x10 camera chip and relevant variables. */ -static int ov7x10_init(struct i2c_client *c) -{ - struct ovcamchip *ov = i2c_get_clientdata(c); - struct ov7x10 *s; - int rc; - - DDEBUG(4, &c->dev, "entered"); - - rc = ov_write_regvals(c, regvals_init_7x10); - if (rc < 0) - return rc; - - ov->spriv = s = kzalloc(sizeof *s, GFP_KERNEL); - if (!s) - return -ENOMEM; - - s->auto_brt = 1; - s->auto_exp = 1; - - return rc; -} - -static int ov7x10_free(struct i2c_client *c) -{ - struct ovcamchip *ov = i2c_get_clientdata(c); - - kfree(ov->spriv); - return 0; -} - -static int ov7x10_set_control(struct i2c_client *c, - struct ovcamchip_control *ctl) -{ - struct ovcamchip *ov = i2c_get_clientdata(c); - struct ov7x10 *s = ov->spriv; - int rc; - int v = ctl->value; - - switch (ctl->id) { - case OVCAMCHIP_CID_CONT: - rc = ov_write(c, REG_CNT, v >> 8); - break; - case OVCAMCHIP_CID_BRIGHT: - rc = ov_write(c, REG_BRT, v >> 8); - break; - case OVCAMCHIP_CID_SAT: - rc = ov_write(c, REG_SAT, v >> 8); - break; - case OVCAMCHIP_CID_HUE: - rc = ov_write(c, REG_RED, 0xFF - (v >> 8)); - if (rc < 0) - goto out; - - rc = ov_write(c, REG_BLUE, v >> 8); - break; - case OVCAMCHIP_CID_EXP: - rc = ov_write(c, REG_EXP, v); - break; - case OVCAMCHIP_CID_FREQ: - { - int sixty = (v == 60); - - rc = ov_write_mask(c, 0x2a, sixty?0x00:0x80, 0x80); - if (rc < 0) - goto out; - - rc = ov_write(c, 0x2b, sixty?0x00:0xac); - if (rc < 0) - goto out; - - rc = ov_write_mask(c, 0x13, 0x10, 0x10); - if (rc < 0) - goto out; - - rc = ov_write_mask(c, 0x13, 0x00, 0x10); - break; - } - case OVCAMCHIP_CID_BANDFILT: - rc = ov_write_mask(c, 0x2d, v?0x04:0x00, 0x04); - s->bandfilt = v; - break; - case OVCAMCHIP_CID_AUTOBRIGHT: - rc = ov_write_mask(c, 0x2d, v?0x10:0x00, 0x10); - s->auto_brt = v; - break; - case OVCAMCHIP_CID_AUTOEXP: - rc = ov_write_mask(c, 0x29, v?0x00:0x80, 0x80); - s->auto_exp = v; - break; - case OVCAMCHIP_CID_MIRROR: - rc = ov_write_mask(c, 0x12, v?0x40:0x00, 0x40); - s->mirror = v; - break; - default: - DDEBUG(2, &c->dev, "control not supported: %d", ctl->id); - return -EPERM; - } - -out: - DDEBUG(3, &c->dev, "id=%d, arg=%d, rc=%d", ctl->id, v, rc); - return rc; -} - -static int ov7x10_get_control(struct i2c_client *c, - struct ovcamchip_control *ctl) -{ - struct ovcamchip *ov = i2c_get_clientdata(c); - struct ov7x10 *s = ov->spriv; - int rc = 0; - unsigned char val = 0; - - switch (ctl->id) { - case OVCAMCHIP_CID_CONT: - rc = ov_read(c, REG_CNT, &val); - ctl->value = val << 8; - break; - case OVCAMCHIP_CID_BRIGHT: - rc = ov_read(c, REG_BRT, &val); - ctl->value = val << 8; - break; - case OVCAMCHIP_CID_SAT: - rc = ov_read(c, REG_SAT, &val); - ctl->value = val << 8; - break; - case OVCAMCHIP_CID_HUE: - rc = ov_read(c, REG_BLUE, &val); - ctl->value = val << 8; - break; - case OVCAMCHIP_CID_EXP: - rc = ov_read(c, REG_EXP, &val); - ctl->value = val; - break; - case OVCAMCHIP_CID_BANDFILT: - ctl->value = s->bandfilt; - break; - case OVCAMCHIP_CID_AUTOBRIGHT: - ctl->value = s->auto_brt; - break; - case OVCAMCHIP_CID_AUTOEXP: - ctl->value = s->auto_exp; - break; - case OVCAMCHIP_CID_MIRROR: - ctl->value = s->mirror; - break; - default: - DDEBUG(2, &c->dev, "control not supported: %d", ctl->id); - return -EPERM; - } - - DDEBUG(3, &c->dev, "id=%d, arg=%d, rc=%d", ctl->id, ctl->value, rc); - return rc; -} - -static int ov7x10_mode_init(struct i2c_client *c, struct ovcamchip_window *win) -{ - int qvga = win->quarter; - - /******** QVGA-specific regs ********/ - - ov_write(c, 0x14, qvga?0x24:0x04); - - /******** Palette-specific regs ********/ - - if (win->format == VIDEO_PALETTE_GREY) { - ov_write_mask(c, 0x0e, 0x40, 0x40); - ov_write_mask(c, 0x13, 0x20, 0x20); - } else { - ov_write_mask(c, 0x0e, 0x00, 0x40); - ov_write_mask(c, 0x13, 0x00, 0x20); - } - - /******** Clock programming ********/ - - ov_write(c, 0x11, win->clockdiv); - - /******** Resolution-specific ********/ - - if (win->width == 640 && win->height == 480) - ov_write(c, 0x35, 0x9e); - else - ov_write(c, 0x35, 0x1e); - - return 0; -} - -static int ov7x10_set_window(struct i2c_client *c, struct ovcamchip_window *win) -{ - int ret, hwscale, vwscale; - - ret = ov7x10_mode_init(c, win); - if (ret < 0) - return ret; - - if (win->quarter) { - hwscale = 1; - vwscale = 0; - } else { - hwscale = 2; - vwscale = 1; - } - - ov_write(c, 0x17, HWSBASE + (win->x >> hwscale)); - ov_write(c, 0x18, HWEBASE + ((win->x + win->width) >> hwscale)); - ov_write(c, 0x19, VWSBASE + (win->y >> vwscale)); - ov_write(c, 0x1a, VWEBASE + ((win->y + win->height) >> vwscale)); - - return 0; -} - -static int ov7x10_command(struct i2c_client *c, unsigned int cmd, void *arg) -{ - switch (cmd) { - case OVCAMCHIP_CMD_S_CTRL: - return ov7x10_set_control(c, arg); - case OVCAMCHIP_CMD_G_CTRL: - return ov7x10_get_control(c, arg); - case OVCAMCHIP_CMD_S_MODE: - return ov7x10_set_window(c, arg); - default: - DDEBUG(2, &c->dev, "command not supported: %d", cmd); - return -ENOIOCTLCMD; - } -} - -struct ovcamchip_ops ov7x10_ops = { - .init = ov7x10_init, - .free = ov7x10_free, - .command = ov7x10_command, -}; diff --git a/drivers/media/video/ovcamchip/ov7x20.c b/drivers/media/video/ovcamchip/ov7x20.c deleted file mode 100644 index 8e26ae338f3..00000000000 --- a/drivers/media/video/ovcamchip/ov7x20.c +++ /dev/null @@ -1,454 +0,0 @@ -/* OmniVision OV7620/OV7120 Camera Chip Support Code - * - * Copyright (c) 1999-2004 Mark McClelland <mark@alpha.dyndns.org> - * http://alpha.dyndns.org/ov511/ - * - * OV7620 fixes by Charl P. Botha <cpbotha@ieee.org> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. NO WARRANTY OF ANY KIND is expressed or implied. - */ - -#define DEBUG - -#include <linux/slab.h> -#include "ovcamchip_priv.h" - -/* Registers */ -#define REG_GAIN 0x00 /* gain [5:0] */ -#define REG_BLUE 0x01 /* blue gain */ -#define REG_RED 0x02 /* red gain */ -#define REG_SAT 0x03 /* saturation */ -#define REG_BRT 0x06 /* Y brightness */ -#define REG_SHARP 0x07 /* analog sharpness */ -#define REG_BLUE_BIAS 0x0C /* WB blue ratio [5:0] */ -#define REG_RED_BIAS 0x0D /* WB red ratio [5:0] */ -#define REG_EXP 0x10 /* exposure */ - -/* Default control settings. Values are in terms of V4L2 controls. */ -#define OV7120_DFL_BRIGHT 0x60 -#define OV7620_DFL_BRIGHT 0x60 -#define OV7120_DFL_SAT 0xb0 -#define OV7620_DFL_SAT 0xc0 -#define DFL_AUTO_EXP 1 -#define DFL_AUTO_GAIN 1 -#define OV7120_DFL_GAIN 0x00 -#define OV7620_DFL_GAIN 0x00 -/* NOTE: Since autoexposure is the default, these aren't programmed into the - * OV7x20 chip. They are just here because V4L2 expects a default */ -#define OV7120_DFL_EXP 0x7f -#define OV7620_DFL_EXP 0x7f - -/* Window parameters */ -#define HWSBASE 0x2F /* From 7620.SET (spec is wrong) */ -#define HWEBASE 0x2F -#define VWSBASE 0x05 -#define VWEBASE 0x05 - -struct ov7x20 { - int auto_brt; - int auto_exp; - int auto_gain; - int backlight; - int bandfilt; - int mirror; -}; - -/* Contrast look-up table */ -static unsigned char ctab[] = { - 0x01, 0x05, 0x09, 0x11, 0x15, 0x35, 0x37, 0x57, - 0x5b, 0xa5, 0xa7, 0xc7, 0xc9, 0xcf, 0xef, 0xff -}; - -/* Settings for (Black & White) OV7120 camera chip */ -static struct ovcamchip_regvals regvals_init_7120[] = { - { 0x12, 0x80 }, /* reset */ - { 0x13, 0x00 }, /* Autoadjust off */ - { 0x12, 0x20 }, /* Disable AWB */ - { 0x13, DFL_AUTO_GAIN?0x01:0x00 }, /* Autoadjust on (if desired) */ - { 0x00, OV7120_DFL_GAIN }, - { 0x01, 0x80 }, - { 0x02, 0x80 }, - { 0x03, OV7120_DFL_SAT }, - { 0x06, OV7120_DFL_BRIGHT }, - { 0x07, 0x00 }, - { 0x0c, 0x20 }, - { 0x0d, 0x20 }, - { 0x11, 0x01 }, - { 0x14, 0x84 }, - { 0x15, 0x01 }, - { 0x16, 0x03 }, - { 0x17, 0x2f }, - { 0x18, 0xcf }, - { 0x19, 0x06 }, - { 0x1a, 0xf5 }, - { 0x1b, 0x00 }, - { 0x20, 0x08 }, - { 0x21, 0x80 }, - { 0x22, 0x80 }, - { 0x23, 0x00 }, - { 0x26, 0xa0 }, - { 0x27, 0xfa }, - { 0x28, 0x20 }, /* DON'T set bit 6. It is for the OV7620 only */ - { 0x29, DFL_AUTO_EXP?0x00:0x80 }, - { 0x2a, 0x10 }, - { 0x2b, 0x00 }, - { 0x2c, 0x88 }, - { 0x2d, 0x95 }, - { 0x2e, 0x80 }, - { 0x2f, 0x44 }, - { 0x60, 0x20 }, - { 0x61, 0x02 }, - { 0x62, 0x5f }, - { 0x63, 0xd5 }, - { 0x64, 0x57 }, - { 0x65, 0x83 }, /* OV says "don't change this value" */ - { 0x66, 0x55 }, - { 0x67, 0x92 }, - { 0x68, 0xcf }, - { 0x69, 0x76 }, - { 0x6a, 0x22 }, - { 0x6b, 0xe2 }, - { 0x6c, 0x40 }, - { 0x6d, 0x48 }, - { 0x6e, 0x80 }, - { 0x6f, 0x0d }, - { 0x70, 0x89 }, - { 0x71, 0x00 }, - { 0x72, 0x14 }, - { 0x73, 0x54 }, - { 0x74, 0xa0 }, - { 0x75, 0x8e }, - { 0x76, 0x00 }, - { 0x77, 0xff }, - { 0x78, 0x80 }, - { 0x79, 0x80 }, - { 0x7a, 0x80 }, - { 0x7b, 0xe6 }, - { 0x7c, 0x00 }, - { 0x24, 0x3a }, - { 0x25, 0x60 }, - { 0xff, 0xff }, /* END MARKER */ -}; - -/* Settings for (color) OV7620 camera chip */ -static struct ovcamchip_regvals regvals_init_7620[] = { - { 0x12, 0x80 }, /* reset */ - { 0x00, OV7620_DFL_GAIN }, - { 0x01, 0x80 }, - { 0x02, 0x80 }, - { 0x03, OV7620_DFL_SAT }, - { 0x06, OV7620_DFL_BRIGHT }, - { 0x07, 0x00 }, - { 0x0c, 0x24 }, - { 0x0c, 0x24 }, - { 0x0d, 0x24 }, - { 0x11, 0x01 }, - { 0x12, 0x24 }, - { 0x13, DFL_AUTO_GAIN?0x01:0x00 }, - { 0x14, 0x84 }, - { 0x15, 0x01 }, - { 0x16, 0x03 }, - { 0x17, 0x2f }, - { 0x18, 0xcf }, - { 0x19, 0x06 }, - { 0x1a, 0xf5 }, - { 0x1b, 0x00 }, - { 0x20, 0x18 }, - { 0x21, 0x80 }, - { 0x22, 0x80 }, - { 0x23, 0x00 }, - { 0x26, 0xa2 }, - { 0x27, 0xea }, - { 0x28, 0x20 }, - { 0x29, DFL_AUTO_EXP?0x00:0x80 }, - { 0x2a, 0x10 }, - { 0x2b, 0x00 }, - { 0x2c, 0x88 }, - { 0x2d, 0x91 }, - { 0x2e, 0x80 }, - { 0x2f, 0x44 }, - { 0x60, 0x27 }, - { 0x61, 0x02 }, - { 0x62, 0x5f }, - { 0x63, 0xd5 }, - { 0x64, 0x57 }, - { 0x65, 0x83 }, - { 0x66, 0x55 }, - { 0x67, 0x92 }, - { 0x68, 0xcf }, - { 0x69, 0x76 }, - { 0x6a, 0x22 }, - { 0x6b, 0x00 }, - { 0x6c, 0x02 }, - { 0x6d, 0x44 }, - { 0x6e, 0x80 }, - { 0x6f, 0x1d }, - { 0x70, 0x8b }, - { 0x71, 0x00 }, - { 0x72, 0x14 }, - { 0x73, 0x54 }, - { 0x74, 0x00 }, - { 0x75, 0x8e }, - { 0x76, 0x00 }, - { 0x77, 0xff }, - { 0x78, 0x80 }, - { 0x79, 0x80 }, - { 0x7a, 0x80 }, - { 0x7b, 0xe2 }, - { 0x7c, 0x00 }, - { 0xff, 0xff }, /* END MARKER */ -}; - -/* Returns index into the specified look-up table, with 'n' elements, for which - * the value is greater than or equal to "val". If a match isn't found, (n-1) - * is returned. The entries in the table must be in ascending order. */ -static inline int ov7x20_lut_find(unsigned char lut[], int n, unsigned char val) -{ - int i = 0; - - while (lut[i] < val && i < n) - i++; - - return i; -} - -/* This initializes the OV7x20 camera chip and relevant variables. */ -static int ov7x20_init(struct i2c_client *c) -{ - struct ovcamchip *ov = i2c_get_clientdata(c); - struct ov7x20 *s; - int rc; - - DDEBUG(4, &c->dev, "entered"); - - if (ov->mono) - rc = ov_write_regvals(c, regvals_init_7120); - else - rc = ov_write_regvals(c, regvals_init_7620); - - if (rc < 0) - return rc; - - ov->spriv = s = kzalloc(sizeof *s, GFP_KERNEL); - if (!s) - return -ENOMEM; - - s->auto_brt = 1; - s->auto_exp = DFL_AUTO_EXP; - s->auto_gain = DFL_AUTO_GAIN; - - return 0; -} - -static int ov7x20_free(struct i2c_client *c) -{ - struct ovcamchip *ov = i2c_get_clientdata(c); - - kfree(ov->spriv); - return 0; -} - -static int ov7x20_set_v4l1_control(struct i2c_client *c, - struct ovcamchip_control *ctl) -{ - struct ovcamchip *ov = i2c_get_clientdata(c); - struct ov7x20 *s = ov->spriv; - int rc; - int v = ctl->value; - - switch (ctl->id) { - case OVCAMCHIP_CID_CONT: - { - /* Use Y gamma control instead. Bit 0 enables it. */ - rc = ov_write(c, 0x64, ctab[v >> 12]); - break; - } - case OVCAMCHIP_CID_BRIGHT: - /* 7620 doesn't like manual changes when in auto mode */ - if (!s->auto_brt) - rc = ov_write(c, REG_BRT, v >> 8); - else - rc = 0; - break; - case OVCAMCHIP_CID_SAT: - rc = ov_write(c, REG_SAT, v >> 8); - break; - case OVCAMCHIP_CID_EXP: - if (!s->auto_exp) - rc = ov_write(c, REG_EXP, v); - else - rc = -EBUSY; - break; - case OVCAMCHIP_CID_FREQ: - { - int sixty = (v == 60); - - rc = ov_write_mask(c, 0x2a, sixty?0x00:0x80, 0x80); - if (rc < 0) - goto out; - - rc = ov_write(c, 0x2b, sixty?0x00:0xac); - if (rc < 0) - goto out; - - rc = ov_write_mask(c, 0x76, 0x01, 0x01); - break; - } - case OVCAMCHIP_CID_BANDFILT: - rc = ov_write_mask(c, 0x2d, v?0x04:0x00, 0x04); - s->bandfilt = v; - break; - case OVCAMCHIP_CID_AUTOBRIGHT: - rc = ov_write_mask(c, 0x2d, v?0x10:0x00, 0x10); - s->auto_brt = v; - break; - case OVCAMCHIP_CID_AUTOEXP: - rc = ov_write_mask(c, 0x13, v?0x01:0x00, 0x01); - s->auto_exp = v; - break; - case OVCAMCHIP_CID_BACKLIGHT: - { - rc = ov_write_mask(c, 0x68, v?0xe0:0xc0, 0xe0); - if (rc < 0) - goto out; - - rc = ov_write_mask(c, 0x29, v?0x08:0x00, 0x08); - if (rc < 0) - goto out; - - rc = ov_write_mask(c, 0x28, v?0x02:0x00, 0x02); - s->backlight = v; - break; - } - case OVCAMCHIP_CID_MIRROR: - rc = ov_write_mask(c, 0x12, v?0x40:0x00, 0x40); - s->mirror = v; - break; - default: - DDEBUG(2, &c->dev, "control not supported: %d", ctl->id); - return -EPERM; - } - -out: - DDEBUG(3, &c->dev, "id=%d, arg=%d, rc=%d", ctl->id, v, rc); - return rc; -} - -static int ov7x20_get_v4l1_control(struct i2c_client *c, - struct ovcamchip_control *ctl) -{ - struct ovcamchip *ov = i2c_get_clientdata(c); - struct ov7x20 *s = ov->spriv; - int rc = 0; - unsigned char val = 0; - - switch (ctl->id) { - case OVCAMCHIP_CID_CONT: - rc = ov_read(c, 0x64, &val); - ctl->value = ov7x20_lut_find(ctab, 16, val) << 12; - break; - case OVCAMCHIP_CID_BRIGHT: - rc = ov_read(c, REG_BRT, &val); - ctl->value = val << 8; - break; - case OVCAMCHIP_CID_SAT: - rc = ov_read(c, REG_SAT, &val); - ctl->value = val << 8; - break; - case OVCAMCHIP_CID_EXP: - rc = ov_read(c, REG_EXP, &val); - ctl->value = val; - break; - case OVCAMCHIP_CID_BANDFILT: - ctl->value = s->bandfilt; - break; - case OVCAMCHIP_CID_AUTOBRIGHT: - ctl->value = s->auto_brt; - break; - case OVCAMCHIP_CID_AUTOEXP: - ctl->value = s->auto_exp; - break; - case OVCAMCHIP_CID_BACKLIGHT: - ctl->value = s->backlight; - break; - case OVCAMCHIP_CID_MIRROR: - ctl->value = s->mirror; - break; - default: - DDEBUG(2, &c->dev, "control not supported: %d", ctl->id); - return -EPERM; - } - - DDEBUG(3, &c->dev, "id=%d, arg=%d, rc=%d", ctl->id, ctl->value, rc); - return rc; -} - -static int ov7x20_mode_init(struct i2c_client *c, struct ovcamchip_window *win) -{ - struct ovcamchip *ov = i2c_get_clientdata(c); - int qvga = win->quarter; - - /******** QVGA-specific regs ********/ - ov_write_mask(c, 0x14, qvga?0x20:0x00, 0x20); - ov_write_mask(c, 0x28, qvga?0x00:0x20, 0x20); - ov_write(c, 0x24, qvga?0x20:0x3a); - ov_write(c, 0x25, qvga?0x30:0x60); - ov_write_mask(c, 0x2d, qvga?0x40:0x00, 0x40); - if (!ov->mono) - ov_write_mask(c, 0x67, qvga?0xf0:0x90, 0xf0); - ov_write_mask(c, 0x74, qvga?0x20:0x00, 0x20); - - /******** Clock programming ********/ - - ov_write(c, 0x11, win->clockdiv); - - return 0; -} - -static int ov7x20_set_window(struct i2c_client *c, struct ovcamchip_window *win) -{ - int ret, hwscale, vwscale; - - ret = ov7x20_mode_init(c, win); - if (ret < 0) - return ret; - - if (win->quarter) { - hwscale = 1; - vwscale = 0; - } else { - hwscale = 2; - vwscale = 1; - } - - ov_write(c, 0x17, HWSBASE + (win->x >> hwscale)); - ov_write(c, 0x18, HWEBASE + ((win->x + win->width) >> hwscale)); - ov_write(c, 0x19, VWSBASE + (win->y >> vwscale)); - ov_write(c, 0x1a, VWEBASE + ((win->y + win->height) >> vwscale)); - - return 0; -} - -static int ov7x20_command(struct i2c_client *c, unsigned int cmd, void *arg) -{ - switch (cmd) { - case OVCAMCHIP_CMD_S_CTRL: - return ov7x20_set_v4l1_control(c, arg); - case OVCAMCHIP_CMD_G_CTRL: - return ov7x20_get_v4l1_control(c, arg); - case OVCAMCHIP_CMD_S_MODE: - return ov7x20_set_window(c, arg); - default: - DDEBUG(2, &c->dev, "command not supported: %d", cmd); - return -ENOIOCTLCMD; - } -} - -struct ovcamchip_ops ov7x20_ops = { - .init = ov7x20_init, - .free = ov7x20_free, - .command = ov7x20_command, -}; diff --git a/drivers/media/video/ovcamchip/ovcamchip_core.c b/drivers/media/video/ovcamchip/ovcamchip_core.c deleted file mode 100644 index d573d842899..00000000000 --- a/drivers/media/video/ovcamchip/ovcamchip_core.c +++ /dev/null @@ -1,395 +0,0 @@ -/* Shared Code for OmniVision Camera Chip Drivers - * - * Copyright (c) 2004 Mark McClelland <mark@alpha.dyndns.org> - * http://alpha.dyndns.org/ov511/ - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. NO WARRANTY OF ANY KIND is expressed or implied. - */ - -#define DEBUG - -#include <linux/init.h> -#include <linux/module.h> -#include <linux/slab.h> -#include <linux/delay.h> -#include <linux/i2c.h> -#include <media/v4l2-device.h> -#include <media/v4l2-i2c-drv.h> -#include "ovcamchip_priv.h" - -#define DRIVER_VERSION "v2.27 for Linux 2.6" -#define DRIVER_AUTHOR "Mark McClelland <mark@alpha.dyndns.org>" -#define DRIVER_DESC "OV camera chip I2C driver" - -#define PINFO(fmt, args...) printk(KERN_INFO "ovcamchip: " fmt "\n" , ## args); -#define PERROR(fmt, args...) printk(KERN_ERR "ovcamchip: " fmt "\n" , ## args); - -#ifdef DEBUG -int ovcamchip_debug = 0; -static int debug; -module_param(debug, int, 0); -MODULE_PARM_DESC(debug, - "Debug level: 0=none, 1=inits, 2=warning, 3=config, 4=functions, 5=all"); -#endif - -/* By default, let bridge driver tell us if chip is monochrome. mono=0 - * will ignore that and always treat chips as color. mono=1 will force - * monochrome mode for all chips. */ -static int mono = -1; -module_param(mono, int, 0); -MODULE_PARM_DESC(mono, - "1=chips are monochrome (OVx1xx), 0=force color, -1=autodetect (default)"); - -MODULE_AUTHOR(DRIVER_AUTHOR); -MODULE_DESCRIPTION(DRIVER_DESC); -MODULE_LICENSE("GPL"); - - -/* Registers common to all chips, that are needed for detection */ -#define GENERIC_REG_ID_HIGH 0x1C /* manufacturer ID MSB */ -#define GENERIC_REG_ID_LOW 0x1D /* manufacturer ID LSB */ -#define GENERIC_REG_COM_I 0x29 /* misc ID bits */ - -static char *chip_names[NUM_CC_TYPES] = { - [CC_UNKNOWN] = "Unknown chip", - [CC_OV76BE] = "OV76BE", - [CC_OV7610] = "OV7610", - [CC_OV7620] = "OV7620", - [CC_OV7620AE] = "OV7620AE", - [CC_OV6620] = "OV6620", - [CC_OV6630] = "OV6630", - [CC_OV6630AE] = "OV6630AE", - [CC_OV6630AF] = "OV6630AF", -}; - -/* ----------------------------------------------------------------------- */ - -int ov_write_regvals(struct i2c_client *c, struct ovcamchip_regvals *rvals) -{ - int rc; - - while (rvals->reg != 0xff) { - rc = ov_write(c, rvals->reg, rvals->val); - if (rc < 0) - return rc; - rvals++; - } - - return 0; -} - -/* Writes bits at positions specified by mask to an I2C reg. Bits that are in - * the same position as 1's in "mask" are cleared and set to "value". Bits - * that are in the same position as 0's in "mask" are preserved, regardless - * of their respective state in "value". - */ -int ov_write_mask(struct i2c_client *c, - unsigned char reg, - unsigned char value, - unsigned char mask) -{ - int rc; - unsigned char oldval, newval; - - if (mask == 0xff) { - newval = value; - } else { - rc = ov_read(c, reg, &oldval); - if (rc < 0) - return rc; - - oldval &= (~mask); /* Clear the masked bits */ - value &= mask; /* Enforce mask on value */ - newval = oldval | value; /* Set the desired bits */ - } - - return ov_write(c, reg, newval); -} - -/* ----------------------------------------------------------------------- */ - -/* Reset the chip and ensure that I2C is synchronized. Returns <0 if failure. - */ -static int init_camchip(struct i2c_client *c) -{ - int i, success; - unsigned char high, low; - - /* Reset the chip */ - ov_write(c, 0x12, 0x80); - - /* Wait for it to initialize */ - msleep(150); - - for (i = 0, success = 0; i < I2C_DETECT_RETRIES && !success; i++) { - if (ov_read(c, GENERIC_REG_ID_HIGH, &high) >= 0) { - if (ov_read(c, GENERIC_REG_ID_LOW, &low) >= 0) { - if (high == 0x7F && low == 0xA2) { - success = 1; - continue; - } - } - } - - /* Reset the chip */ - ov_write(c, 0x12, 0x80); - - /* Wait for it to initialize */ - msleep(150); - - /* Dummy read to sync I2C */ - ov_read(c, 0x00, &low); - } - - if (!success) - return -EIO; - - PDEBUG(1, "I2C synced in %d attempt(s)", i); - - return 0; -} - -/* This detects the OV7610, OV7620, or OV76BE chip. */ -static int ov7xx0_detect(struct i2c_client *c) -{ - struct ovcamchip *ov = i2c_get_clientdata(c); - int rc; - unsigned char val; - - PDEBUG(4, ""); - - /* Detect chip (sub)type */ - rc = ov_read(c, GENERIC_REG_COM_I, &val); - if (rc < 0) { - PERROR("Error detecting ov7xx0 type"); - return rc; - } - - if ((val & 3) == 3) { - PINFO("Camera chip is an OV7610"); - ov->subtype = CC_OV7610; - } else if ((val & 3) == 1) { - rc = ov_read(c, 0x15, &val); - if (rc < 0) { - PERROR("Error detecting ov7xx0 type"); - return rc; - } - - if (val & 1) { - PINFO("Camera chip is an OV7620AE"); - /* OV7620 is a close enough match for now. There are - * some definite differences though, so this should be - * fixed */ - ov->subtype = CC_OV7620; - } else { - PINFO("Camera chip is an OV76BE"); - ov->subtype = CC_OV76BE; - } - } else if ((val & 3) == 0) { - PINFO("Camera chip is an OV7620"); - ov->subtype = CC_OV7620; - } else { - PERROR("Unknown camera chip version: %d", val & 3); - return -ENOSYS; - } - - if (ov->subtype == CC_OV76BE) - ov->sops = &ov76be_ops; - else if (ov->subtype == CC_OV7620) - ov->sops = &ov7x20_ops; - else - ov->sops = &ov7x10_ops; - - return 0; -} - -/* This detects the OV6620, OV6630, OV6630AE, or OV6630AF chip. */ -static int ov6xx0_detect(struct i2c_client *c) -{ - struct ovcamchip *ov = i2c_get_clientdata(c); - int rc; - unsigned char val; - - PDEBUG(4, ""); - - /* Detect chip (sub)type */ - rc = ov_read(c, GENERIC_REG_COM_I, &val); - if (rc < 0) { - PERROR("Error detecting ov6xx0 type"); - return -1; - } - - if ((val & 3) == 0) { - ov->subtype = CC_OV6630; - PINFO("Camera chip is an OV6630"); - } else if ((val & 3) == 1) { - ov->subtype = CC_OV6620; - PINFO("Camera chip is an OV6620"); - } else if ((val & 3) == 2) { - ov->subtype = CC_OV6630; - PINFO("Camera chip is an OV6630AE"); - } else if ((val & 3) == 3) { - ov->subtype = CC_OV6630; - PINFO("Camera chip is an OV6630AF"); - } - - if (ov->subtype == CC_OV6620) - ov->sops = &ov6x20_ops; - else - ov->sops = &ov6x30_ops; - - return 0; -} - -static int ovcamchip_detect(struct i2c_client *c) -{ - /* Ideally we would just try a single register write and see if it NAKs. - * That isn't possible since the OV518 can't report I2C transaction - * failures. So, we have to try to initialize the chip (i.e. reset it - * and check the ID registers) to detect its presence. */ - - /* Test for 7xx0 */ - PDEBUG(3, "Testing for 0V7xx0"); - if (init_camchip(c) < 0) - return -ENODEV; - /* 7-bit addresses with bit 0 set are for the OV7xx0 */ - if (c->addr & 1) { - if (ov7xx0_detect(c) < 0) { - PERROR("Failed to init OV7xx0"); - return -EIO; - } - return 0; - } - /* Test for 6xx0 */ - PDEBUG(3, "Testing for 0V6xx0"); - if (ov6xx0_detect(c) < 0) { - PERROR("Failed to init OV6xx0"); - return -EIO; - } - return 0; -} - -/* ----------------------------------------------------------------------- */ - -static long ovcamchip_ioctl(struct v4l2_subdev *sd, unsigned int cmd, void *arg) -{ - struct ovcamchip *ov = to_ovcamchip(sd); - struct i2c_client *c = v4l2_get_subdevdata(sd); - - if (!ov->initialized && - cmd != OVCAMCHIP_CMD_Q_SUBTYPE && - cmd != OVCAMCHIP_CMD_INITIALIZE) { - v4l2_err(sd, "Camera chip not initialized yet!\n"); - return -EPERM; - } - - switch (cmd) { - case OVCAMCHIP_CMD_Q_SUBTYPE: - { - *(int *)arg = ov->subtype; - return 0; - } - case OVCAMCHIP_CMD_INITIALIZE: - { - int rc; - - if (mono == -1) - ov->mono = *(int *)arg; - else - ov->mono = mono; - - if (ov->mono) { - if (ov->subtype != CC_OV7620) - v4l2_warn(sd, "Monochrome not " - "implemented for this chip\n"); - else - v4l2_info(sd, "Initializing chip as " - "monochrome\n"); - } - - rc = ov->sops->init(c); - if (rc < 0) - return rc; - - ov->initialized = 1; - return 0; - } - default: - return ov->sops->command(c, cmd, arg); - } -} - -/* ----------------------------------------------------------------------- */ - -static const struct v4l2_subdev_core_ops ovcamchip_core_ops = { - .ioctl = ovcamchip_ioctl, -}; - -static const struct v4l2_subdev_ops ovcamchip_ops = { - .core = &ovcamchip_core_ops, -}; - -static int ovcamchip_probe(struct i2c_client *client, - const struct i2c_device_id *id) -{ - struct ovcamchip *ov; - struct v4l2_subdev *sd; - int rc = 0; - - ov = kzalloc(sizeof *ov, GFP_KERNEL); - if (!ov) { - rc = -ENOMEM; - goto no_ov; - } - sd = &ov->sd; - v4l2_i2c_subdev_init(sd, client, &ovcamchip_ops); - - rc = ovcamchip_detect(client); - if (rc < 0) - goto error; - - v4l_info(client, "%s found @ 0x%02x (%s)\n", - chip_names[ov->subtype], client->addr << 1, client->adapter->name); - - PDEBUG(1, "Camera chip detection complete"); - - return rc; -error: - kfree(ov); -no_ov: - PDEBUG(1, "returning %d", rc); - return rc; -} - -static int ovcamchip_remove(struct i2c_client *client) -{ - struct v4l2_subdev *sd = i2c_get_clientdata(client); - struct ovcamchip *ov = to_ovcamchip(sd); - int rc; - - v4l2_device_unregister_subdev(sd); - rc = ov->sops->free(client); - if (rc < 0) - return rc; - - kfree(ov); - return 0; -} - -/* ----------------------------------------------------------------------- */ - -static const struct i2c_device_id ovcamchip_id[] = { - { "ovcamchip", 0 }, - { } -}; -MODULE_DEVICE_TABLE(i2c, ovcamchip_id); - -static struct v4l2_i2c_driver_data v4l2_i2c_data = { - .name = "ovcamchip", - .probe = ovcamchip_probe, - .remove = ovcamchip_remove, - .id_table = ovcamchip_id, -}; diff --git a/drivers/media/video/ovcamchip/ovcamchip_priv.h b/drivers/media/video/ovcamchip/ovcamchip_priv.h deleted file mode 100644 index 4f07b78c88b..00000000000 --- a/drivers/media/video/ovcamchip/ovcamchip_priv.h +++ /dev/null @@ -1,101 +0,0 @@ -/* OmniVision* camera chip driver private definitions for core code and - * chip-specific code - * - * Copyright (c) 1999-2004 Mark McClelland - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. NO WARRANTY OF ANY KIND is expressed or implied. - * - * * OmniVision is a trademark of OmniVision Technologies, Inc. This driver - * is not sponsored or developed by them. - */ - -#ifndef __LINUX_OVCAMCHIP_PRIV_H -#define __LINUX_OVCAMCHIP_PRIV_H - -#include <linux/i2c.h> -#include <media/v4l2-subdev.h> -#include <media/ovcamchip.h> - -#ifdef DEBUG -extern int ovcamchip_debug; -#endif - -#define PDEBUG(level, fmt, args...) \ - if (ovcamchip_debug >= (level)) pr_debug("[%s:%d] " fmt "\n", \ - __func__, __LINE__ , ## args) - -#define DDEBUG(level, dev, fmt, args...) \ - if (ovcamchip_debug >= (level)) dev_dbg(dev, "[%s:%d] " fmt "\n", \ - __func__, __LINE__ , ## args) - -/* Number of times to retry chip detection. Increase this if you are getting - * "Failed to init camera chip" */ -#define I2C_DETECT_RETRIES 10 - -struct ovcamchip_regvals { - unsigned char reg; - unsigned char val; -}; - -struct ovcamchip_ops { - int (*init)(struct i2c_client *); - int (*free)(struct i2c_client *); - int (*command)(struct i2c_client *, unsigned int, void *); -}; - -struct ovcamchip { - struct v4l2_subdev sd; - struct ovcamchip_ops *sops; - void *spriv; /* Private data for OV7x10.c etc... */ - int subtype; /* = SEN_OV7610 etc... */ - int mono; /* Monochrome chip? (invalid until init) */ - int initialized; /* OVCAMCHIP_CMD_INITIALIZE was successful */ -}; - -static inline struct ovcamchip *to_ovcamchip(struct v4l2_subdev *sd) -{ - return container_of(sd, struct ovcamchip, sd); -} - -extern struct ovcamchip_ops ov6x20_ops; -extern struct ovcamchip_ops ov6x30_ops; -extern struct ovcamchip_ops ov7x10_ops; -extern struct ovcamchip_ops ov7x20_ops; -extern struct ovcamchip_ops ov76be_ops; - -/* --------------------------------- */ -/* I2C I/O */ -/* --------------------------------- */ - -static inline int ov_read(struct i2c_client *c, unsigned char reg, - unsigned char *value) -{ - int rc; - - rc = i2c_smbus_read_byte_data(c, reg); - *value = (unsigned char) rc; - return rc; -} - -static inline int ov_write(struct i2c_client *c, unsigned char reg, - unsigned char value ) -{ - return i2c_smbus_write_byte_data(c, reg, value); -} - -/* --------------------------------- */ -/* FUNCTION PROTOTYPES */ -/* --------------------------------- */ - -/* Functions in ovcamchip_core.c */ - -extern int ov_write_regvals(struct i2c_client *c, - struct ovcamchip_regvals *rvals); - -extern int ov_write_mask(struct i2c_client *c, unsigned char reg, - unsigned char value, unsigned char mask); - -#endif diff --git a/drivers/media/video/pvrusb2/pvrusb2-ioread.c b/drivers/media/video/pvrusb2/pvrusb2-ioread.c index b4824782d85..bba6115c9ae 100644 --- a/drivers/media/video/pvrusb2/pvrusb2-ioread.c +++ b/drivers/media/video/pvrusb2/pvrusb2-ioread.c @@ -223,7 +223,10 @@ int pvr2_ioread_setup(struct pvr2_ioread *cp,struct pvr2_stream *sp) " pvr2_ioread_setup (setup) id=%p",cp); pvr2_stream_kill(sp); ret = pvr2_stream_set_buffer_count(sp,BUFFER_COUNT); - if (ret < 0) return ret; + if (ret < 0) { + mutex_unlock(&cp->mutex); + return ret; + } for (idx = 0; idx < BUFFER_COUNT; idx++) { bp = pvr2_stream_get_buffer(sp,idx); pvr2_buffer_set_buffer(bp, diff --git a/drivers/media/video/pxa_camera.c b/drivers/media/video/pxa_camera.c index fb242f6cfb1..9de7d59916b 100644 --- a/drivers/media/video/pxa_camera.c +++ b/drivers/media/video/pxa_camera.c @@ -276,7 +276,7 @@ static void free_buffer(struct videobuf_queue *vq, struct pxa_buffer *buf) * longer in STATE_QUEUED or STATE_ACTIVE */ videobuf_waiton(&buf->vb, 0, 0); - videobuf_dma_unmap(vq, dma); + videobuf_dma_unmap(vq->dev, dma); videobuf_dma_free(dma); for (i = 0; i < ARRAY_SIZE(buf->dmas); i++) { @@ -1284,7 +1284,7 @@ static int pxa_camera_get_formats(struct soc_camera_device *icd, unsigned int id } switch (code) { - case V4L2_MBUS_FMT_YUYV8_2X8_BE: + case V4L2_MBUS_FMT_UYVY8_2X8: formats++; if (xlate) { xlate->host_fmt = &pxa_camera_formats[0]; @@ -1293,9 +1293,9 @@ static int pxa_camera_get_formats(struct soc_camera_device *icd, unsigned int id dev_dbg(dev, "Providing format %s using code %d\n", pxa_camera_formats[0].name, code); } - case V4L2_MBUS_FMT_YVYU8_2X8_BE: - case V4L2_MBUS_FMT_YUYV8_2X8_LE: - case V4L2_MBUS_FMT_YVYU8_2X8_LE: + case V4L2_MBUS_FMT_VYUY8_2X8: + case V4L2_MBUS_FMT_YUYV8_2X8: + case V4L2_MBUS_FMT_YVYU8_2X8: case V4L2_MBUS_FMT_RGB565_2X8_LE: case V4L2_MBUS_FMT_RGB555_2X8_PADHI_LE: if (xlate) diff --git a/drivers/media/video/rj54n1cb0c.c b/drivers/media/video/rj54n1cb0c.c index 47fd207ba3b..ce78fff2342 100644 --- a/drivers/media/video/rj54n1cb0c.c +++ b/drivers/media/video/rj54n1cb0c.c @@ -1,5 +1,5 @@ /* - * Driver for RJ54N1CB0C CMOS Image Sensor from Micron + * Driver for RJ54N1CB0C CMOS Image Sensor from Sharp * * Copyright (C) 2009, Guennadi Liakhovetski <g.liakhovetski@gmx.de> * @@ -127,8 +127,8 @@ static const struct rj54n1_datafmt *rj54n1_find_datafmt( } static const struct rj54n1_datafmt rj54n1_colour_fmts[] = { - {V4L2_MBUS_FMT_YUYV8_2X8_LE, V4L2_COLORSPACE_JPEG}, - {V4L2_MBUS_FMT_YVYU8_2X8_LE, V4L2_COLORSPACE_JPEG}, + {V4L2_MBUS_FMT_YUYV8_2X8, V4L2_COLORSPACE_JPEG}, + {V4L2_MBUS_FMT_YVYU8_2X8, V4L2_COLORSPACE_JPEG}, {V4L2_MBUS_FMT_RGB565_2X8_LE, V4L2_COLORSPACE_SRGB}, {V4L2_MBUS_FMT_RGB565_2X8_BE, V4L2_COLORSPACE_SRGB}, {V4L2_MBUS_FMT_SBGGR10_2X8_PADHI_LE, V4L2_COLORSPACE_SRGB}, @@ -1046,12 +1046,12 @@ static int rj54n1_s_fmt(struct v4l2_subdev *sd, /* RA_SEL_UL is only relevant for raw modes, ignored otherwise. */ switch (mf->code) { - case V4L2_MBUS_FMT_YUYV8_2X8_LE: + case V4L2_MBUS_FMT_YUYV8_2X8: ret = reg_write(client, RJ54N1_OUT_SEL, 0); if (!ret) ret = reg_set(client, RJ54N1_BYTE_SWAP, 8, 8); break; - case V4L2_MBUS_FMT_YVYU8_2X8_LE: + case V4L2_MBUS_FMT_YVYU8_2X8: ret = reg_write(client, RJ54N1_OUT_SEL, 0); if (!ret) ret = reg_set(client, RJ54N1_BYTE_SWAP, 0, 8); diff --git a/drivers/media/video/s2255drv.c b/drivers/media/video/s2255drv.c index 3c7a79f3812..8ec7c9a45a1 100644 --- a/drivers/media/video/s2255drv.c +++ b/drivers/media/video/s2255drv.c @@ -191,7 +191,6 @@ struct s2255_bufferi { struct s2255_dmaqueue { struct list_head active; struct s2255_dev *dev; - int channel; }; /* for firmware loading, fw_state */ @@ -226,51 +225,60 @@ struct s2255_pipeinfo { }; struct s2255_fmt; /*forward declaration */ +struct s2255_dev; + +struct s2255_channel { + struct video_device vdev; + int resources; + struct s2255_dmaqueue vidq; + struct s2255_bufferi buffer; + struct s2255_mode mode; + /* jpeg compression */ + struct v4l2_jpegcompression jc; + /* capture parameters (for high quality mode full size) */ + struct v4l2_captureparm cap_parm; + int cur_frame; + int last_frame; + + int b_acquire; + /* allocated image size */ + unsigned long req_image_size; + /* received packet size */ + unsigned long pkt_size; + int bad_payload; + unsigned long frame_count; + /* if JPEG image */ + int jpg_size; + /* if channel configured to default state */ + int configured; + wait_queue_head_t wait_setmode; + int setmode_ready; + /* video status items */ + int vidstatus; + wait_queue_head_t wait_vidstatus; + int vidstatus_ready; + unsigned int width; + unsigned int height; + const struct s2255_fmt *fmt; + int idx; /* channel number on device, 0-3 */ +}; + struct s2255_dev { - struct video_device vdev[MAX_CHANNELS]; + struct s2255_channel channel[MAX_CHANNELS]; struct v4l2_device v4l2_dev; - atomic_t channels; /* number of channels registered */ + atomic_t num_channels; int frames; struct mutex lock; struct mutex open_lock; - int resources[MAX_CHANNELS]; struct usb_device *udev; struct usb_interface *interface; u8 read_endpoint; - - struct s2255_dmaqueue vidq[MAX_CHANNELS]; struct timer_list timer; struct s2255_fw *fw_data; struct s2255_pipeinfo pipe; - struct s2255_bufferi buffer[MAX_CHANNELS]; - struct s2255_mode mode[MAX_CHANNELS]; - /* jpeg compression */ - struct v4l2_jpegcompression jc[MAX_CHANNELS]; - /* capture parameters (for high quality mode full size) */ - struct v4l2_captureparm cap_parm[MAX_CHANNELS]; - const struct s2255_fmt *cur_fmt[MAX_CHANNELS]; - int cur_frame[MAX_CHANNELS]; - int last_frame[MAX_CHANNELS]; u32 cc; /* current channel */ - int b_acquire[MAX_CHANNELS]; - /* allocated image size */ - unsigned long req_image_size[MAX_CHANNELS]; - /* received packet size */ - unsigned long pkt_size[MAX_CHANNELS]; - int bad_payload[MAX_CHANNELS]; - unsigned long frame_count[MAX_CHANNELS]; int frame_ready; - /* if JPEG image */ - int jpg_size[MAX_CHANNELS]; - /* if channel configured to default state */ - int chn_configured[MAX_CHANNELS]; - wait_queue_head_t wait_setmode[MAX_CHANNELS]; - int setmode_ready[MAX_CHANNELS]; - /* video status items */ - int vidstatus[MAX_CHANNELS]; - wait_queue_head_t wait_vidstatus[MAX_CHANNELS]; - int vidstatus_ready[MAX_CHANNELS]; int chn_ready; spinlock_t slock; /* dsp firmware version (f2255usb.bin) */ @@ -298,16 +306,10 @@ struct s2255_buffer { struct s2255_fh { struct s2255_dev *dev; - const struct s2255_fmt *fmt; - unsigned int width; - unsigned int height; struct videobuf_queue vb_vidq; enum v4l2_buf_type type; - int channel; - /* mode below is the desired mode. - mode in s2255_dev is the current mode that was last set */ - struct s2255_mode mode; - int resources[MAX_CHANNELS]; + struct s2255_channel *channel; + int resources; }; /* current cypress EEPROM firmware version */ @@ -360,12 +362,11 @@ static int *s2255_debug = &debug; static int s2255_start_readpipe(struct s2255_dev *dev); static void s2255_stop_readpipe(struct s2255_dev *dev); -static int s2255_start_acquire(struct s2255_dev *dev, unsigned long chn); -static int s2255_stop_acquire(struct s2255_dev *dev, unsigned long chn); -static void s2255_fillbuff(struct s2255_dev *dev, struct s2255_buffer *buf, - int chn, int jpgsize); -static int s2255_set_mode(struct s2255_dev *dev, unsigned long chn, - struct s2255_mode *mode); +static int s2255_start_acquire(struct s2255_channel *channel); +static int s2255_stop_acquire(struct s2255_channel *channel); +static void s2255_fillbuff(struct s2255_channel *chn, struct s2255_buffer *buf, + int jpgsize); +static int s2255_set_mode(struct s2255_channel *chan, struct s2255_mode *mode); static int s2255_board_shutdown(struct s2255_dev *dev); static void s2255_fwload_start(struct s2255_dev *dev, int reset); static void s2255_destroy(struct s2255_dev *dev); @@ -577,10 +578,11 @@ static void s2255_fwchunk_complete(struct urb *urb) } -static int s2255_got_frame(struct s2255_dev *dev, int chn, int jpgsize) +static int s2255_got_frame(struct s2255_channel *channel, int jpgsize) { - struct s2255_dmaqueue *dma_q = &dev->vidq[chn]; + struct s2255_dmaqueue *dma_q = &channel->vidq; struct s2255_buffer *buf; + struct s2255_dev *dev = to_s2255_dev(channel->vdev.v4l2_dev); unsigned long flags = 0; int rc = 0; spin_lock_irqsave(&dev->slock, flags); @@ -593,7 +595,7 @@ static int s2255_got_frame(struct s2255_dev *dev, int chn, int jpgsize) struct s2255_buffer, vb.queue); list_del(&buf->vb.queue); do_gettimeofday(&buf->vb.ts); - s2255_fillbuff(dev, buf, dma_q->channel, jpgsize); + s2255_fillbuff(channel, buf, jpgsize); wake_up(&buf->vb.done); dprintk(2, "%s: [buf/i] [%p/%d]\n", __func__, buf, buf->vb.i); unlock: @@ -621,8 +623,8 @@ static const struct s2255_fmt *format_by_fourcc(int fourcc) * http://v4l.videotechnology.com/ * */ -static void s2255_fillbuff(struct s2255_dev *dev, struct s2255_buffer *buf, - int chn, int jpgsize) +static void s2255_fillbuff(struct s2255_channel *channel, + struct s2255_buffer *buf, int jpgsize) { int pos = 0; struct timeval ts; @@ -633,12 +635,11 @@ static void s2255_fillbuff(struct s2255_dev *dev, struct s2255_buffer *buf, if (!vbuf) return; - - last_frame = dev->last_frame[chn]; + last_frame = channel->last_frame; if (last_frame != -1) { - frm = &dev->buffer[chn].frame[last_frame]; + frm = &channel->buffer.frame[last_frame]; tmpbuf = - (const char *)dev->buffer[chn].frame[last_frame].lpvbits; + (const char *)channel->buffer.frame[last_frame].lpvbits; switch (buf->fmt->fourcc) { case V4L2_PIX_FMT_YUYV: case V4L2_PIX_FMT_UYVY: @@ -661,7 +662,7 @@ static void s2255_fillbuff(struct s2255_dev *dev, struct s2255_buffer *buf, default: printk(KERN_DEBUG "s2255: unknown format?\n"); } - dev->last_frame[chn] = -1; + channel->last_frame = -1; } else { printk(KERN_ERR "s2255: =======no frame\n"); return; @@ -671,7 +672,7 @@ static void s2255_fillbuff(struct s2255_dev *dev, struct s2255_buffer *buf, (unsigned long)vbuf, pos); /* tell v4l buffer was filled */ - buf->vb.field_count = dev->frame_count[chn] * 2; + buf->vb.field_count = channel->frame_count * 2; do_gettimeofday(&ts); buf->vb.ts = ts; buf->vb.state = VIDEOBUF_DONE; @@ -686,8 +687,8 @@ static int buffer_setup(struct videobuf_queue *vq, unsigned int *count, unsigned int *size) { struct s2255_fh *fh = vq->priv_data; - - *size = fh->width * fh->height * (fh->fmt->depth >> 3); + struct s2255_channel *channel = fh->channel; + *size = channel->width * channel->height * (channel->fmt->depth >> 3); if (0 == *count) *count = S2255_DEF_BUFS; @@ -710,30 +711,31 @@ static int buffer_prepare(struct videobuf_queue *vq, struct videobuf_buffer *vb, enum v4l2_field field) { struct s2255_fh *fh = vq->priv_data; + struct s2255_channel *channel = fh->channel; struct s2255_buffer *buf = container_of(vb, struct s2255_buffer, vb); int rc; + int w = channel->width; + int h = channel->height; dprintk(4, "%s, field=%d\n", __func__, field); - if (fh->fmt == NULL) + if (channel->fmt == NULL) return -EINVAL; - if ((fh->width < norm_minw(&fh->dev->vdev[fh->channel])) || - (fh->width > norm_maxw(&fh->dev->vdev[fh->channel])) || - (fh->height < norm_minh(&fh->dev->vdev[fh->channel])) || - (fh->height > norm_maxh(&fh->dev->vdev[fh->channel]))) { + if ((w < norm_minw(&channel->vdev)) || + (w > norm_maxw(&channel->vdev)) || + (h < norm_minh(&channel->vdev)) || + (h > norm_maxh(&channel->vdev))) { dprintk(4, "invalid buffer prepare\n"); return -EINVAL; } - - buf->vb.size = fh->width * fh->height * (fh->fmt->depth >> 3); - + buf->vb.size = w * h * (channel->fmt->depth >> 3); if (0 != buf->vb.baddr && buf->vb.bsize < buf->vb.size) { dprintk(4, "invalid buffer prepare\n"); return -EINVAL; } - buf->fmt = fh->fmt; - buf->vb.width = fh->width; - buf->vb.height = fh->height; + buf->fmt = channel->fmt; + buf->vb.width = w; + buf->vb.height = h; buf->vb.field = field; if (VIDEOBUF_NEEDS_INIT == buf->vb.state) { @@ -753,8 +755,8 @@ static void buffer_queue(struct videobuf_queue *vq, struct videobuf_buffer *vb) { struct s2255_buffer *buf = container_of(vb, struct s2255_buffer, vb); struct s2255_fh *fh = vq->priv_data; - struct s2255_dev *dev = fh->dev; - struct s2255_dmaqueue *vidq = &dev->vidq[fh->channel]; + struct s2255_channel *channel = fh->channel; + struct s2255_dmaqueue *vidq = &channel->vidq; dprintk(1, "%s\n", __func__); buf->vb.state = VIDEOBUF_QUEUED; list_add_tail(&buf->vb.queue, &vidq->active); @@ -765,7 +767,7 @@ static void buffer_release(struct videobuf_queue *vq, { struct s2255_buffer *buf = container_of(vb, struct s2255_buffer, vb); struct s2255_fh *fh = vq->priv_data; - dprintk(4, "%s %d\n", __func__, fh->channel); + dprintk(4, "%s %d\n", __func__, fh->channel->idx); free_buffer(vq, buf); } @@ -777,39 +779,43 @@ static struct videobuf_queue_ops s2255_video_qops = { }; -static int res_get(struct s2255_dev *dev, struct s2255_fh *fh) +static int res_get(struct s2255_fh *fh) { + struct s2255_dev *dev = fh->dev; /* is it free? */ + struct s2255_channel *channel = fh->channel; mutex_lock(&dev->lock); - if (dev->resources[fh->channel]) { + if (channel->resources) { /* no, someone else uses it */ mutex_unlock(&dev->lock); return 0; } /* it's free, grab it */ - dev->resources[fh->channel] = 1; - fh->resources[fh->channel] = 1; + channel->resources = 1; + fh->resources = 1; dprintk(1, "s2255: res: get\n"); mutex_unlock(&dev->lock); return 1; } -static int res_locked(struct s2255_dev *dev, struct s2255_fh *fh) +static int res_locked(struct s2255_fh *fh) { - return dev->resources[fh->channel]; + return fh->channel->resources; } static int res_check(struct s2255_fh *fh) { - return fh->resources[fh->channel]; + return fh->resources; } -static void res_free(struct s2255_dev *dev, struct s2255_fh *fh) +static void res_free(struct s2255_fh *fh) { + struct s2255_channel *channel = fh->channel; + struct s2255_dev *dev = fh->dev; mutex_lock(&dev->lock); - dev->resources[fh->channel] = 0; - fh->resources[fh->channel] = 0; + channel->resources = 0; + fh->resources = 0; mutex_unlock(&dev->lock); dprintk(1, "res: put\n"); } @@ -869,12 +875,13 @@ static int vidioc_g_fmt_vid_cap(struct file *file, void *priv, struct v4l2_format *f) { struct s2255_fh *fh = priv; + struct s2255_channel *channel = fh->channel; - f->fmt.pix.width = fh->width; - f->fmt.pix.height = fh->height; + f->fmt.pix.width = channel->width; + f->fmt.pix.height = channel->height; f->fmt.pix.field = fh->vb_vidq.field; - f->fmt.pix.pixelformat = fh->fmt->fourcc; - f->fmt.pix.bytesperline = f->fmt.pix.width * (fh->fmt->depth >> 3); + f->fmt.pix.pixelformat = channel->fmt->fourcc; + f->fmt.pix.bytesperline = f->fmt.pix.width * (channel->fmt->depth >> 3); f->fmt.pix.sizeimage = f->fmt.pix.height * f->fmt.pix.bytesperline; return 0; } @@ -886,11 +893,10 @@ static int vidioc_try_fmt_vid_cap(struct file *file, void *priv, enum v4l2_field field; int b_any_field = 0; struct s2255_fh *fh = priv; - struct s2255_dev *dev = fh->dev; + struct s2255_channel *channel = fh->channel; int is_ntsc; - is_ntsc = - (dev->vdev[fh->channel].current_norm & V4L2_STD_NTSC) ? 1 : 0; + (channel->vdev.current_norm & V4L2_STD_NTSC) ? 1 : 0; fmt = format_by_fourcc(f->fmt.pix.pixelformat); @@ -982,8 +988,10 @@ static int vidioc_s_fmt_vid_cap(struct file *file, void *priv, struct v4l2_format *f) { struct s2255_fh *fh = priv; + struct s2255_channel *channel = fh->channel; const struct s2255_fmt *fmt; struct videobuf_queue *q = &fh->vb_vidq; + struct s2255_mode mode; int ret; int norm; @@ -1005,54 +1013,61 @@ static int vidioc_s_fmt_vid_cap(struct file *file, void *priv, goto out_s_fmt; } - if (res_locked(fh->dev, fh)) { + if (res_locked(fh)) { dprintk(1, "%s: channel busy\n", __func__); ret = -EBUSY; goto out_s_fmt; } - - fh->fmt = fmt; - fh->width = f->fmt.pix.width; - fh->height = f->fmt.pix.height; + mode = channel->mode; + channel->fmt = fmt; + channel->width = f->fmt.pix.width; + channel->height = f->fmt.pix.height; fh->vb_vidq.field = f->fmt.pix.field; fh->type = f->type; - norm = norm_minw(&fh->dev->vdev[fh->channel]); - if (fh->width > norm_minw(&fh->dev->vdev[fh->channel])) { - if (fh->height > norm_minh(&fh->dev->vdev[fh->channel])) { - if (fh->dev->cap_parm[fh->channel].capturemode & + norm = norm_minw(&channel->vdev); + if (channel->width > norm_minw(&channel->vdev)) { + if (channel->height > norm_minh(&channel->vdev)) { + if (channel->cap_parm.capturemode & V4L2_MODE_HIGHQUALITY) - fh->mode.scale = SCALE_4CIFSI; + mode.scale = SCALE_4CIFSI; else - fh->mode.scale = SCALE_4CIFS; + mode.scale = SCALE_4CIFS; } else - fh->mode.scale = SCALE_2CIFS; + mode.scale = SCALE_2CIFS; } else { - fh->mode.scale = SCALE_1CIFS; + mode.scale = SCALE_1CIFS; } - /* color mode */ - switch (fh->fmt->fourcc) { + switch (channel->fmt->fourcc) { case V4L2_PIX_FMT_GREY: - fh->mode.color &= ~MASK_COLOR; - fh->mode.color |= COLOR_Y8; + mode.color &= ~MASK_COLOR; + mode.color |= COLOR_Y8; break; case V4L2_PIX_FMT_JPEG: - fh->mode.color &= ~MASK_COLOR; - fh->mode.color |= COLOR_JPG; - fh->mode.color |= (fh->dev->jc[fh->channel].quality << 8); + mode.color &= ~MASK_COLOR; + mode.color |= COLOR_JPG; + mode.color |= (channel->jc.quality << 8); break; case V4L2_PIX_FMT_YUV422P: - fh->mode.color &= ~MASK_COLOR; - fh->mode.color |= COLOR_YUVPL; + mode.color &= ~MASK_COLOR; + mode.color |= COLOR_YUVPL; break; case V4L2_PIX_FMT_YUYV: case V4L2_PIX_FMT_UYVY: default: - fh->mode.color &= ~MASK_COLOR; - fh->mode.color |= COLOR_YUVPK; + mode.color &= ~MASK_COLOR; + mode.color |= COLOR_YUVPK; break; } + if ((mode.color & MASK_COLOR) != (channel->mode.color & MASK_COLOR)) + mode.restart = 1; + else if (mode.scale != channel->mode.scale) + mode.restart = 1; + else if (mode.format != channel->mode.format) + mode.restart = 1; + channel->mode = mode; + (void) s2255_set_mode(channel, &mode); ret = 0; out_s_fmt: mutex_unlock(&q->vb_lock); @@ -1197,26 +1212,27 @@ static void s2255_print_cfg(struct s2255_dev *sdev, struct s2255_mode *mode) * When the restart parameter is set, we sleep for ONE frame to allow the * DSP time to get the new frame */ -static int s2255_set_mode(struct s2255_dev *dev, unsigned long chn, +static int s2255_set_mode(struct s2255_channel *channel, struct s2255_mode *mode) { int res; __le32 *buffer; unsigned long chn_rev; + struct s2255_dev *dev = to_s2255_dev(channel->vdev.v4l2_dev); mutex_lock(&dev->lock); - chn_rev = G_chnmap[chn]; - dprintk(3, "%s channel %lu\n", __func__, chn); + chn_rev = G_chnmap[channel->idx]; + dprintk(3, "%s channel: %d\n", __func__, channel->idx); /* if JPEG, set the quality */ if ((mode->color & MASK_COLOR) == COLOR_JPG) { mode->color &= ~MASK_COLOR; mode->color |= COLOR_JPG; mode->color &= ~MASK_JPG_QUALITY; - mode->color |= (dev->jc[chn].quality << 8); + mode->color |= (channel->jc.quality << 8); } /* save the mode */ - dev->mode[chn] = *mode; - dev->req_image_size[chn] = get_transfer_size(mode); - dprintk(1, "%s: reqsize %ld\n", __func__, dev->req_image_size[chn]); + channel->mode = *mode; + channel->req_image_size = get_transfer_size(mode); + dprintk(1, "%s: reqsize %ld\n", __func__, channel->req_image_size); buffer = kzalloc(512, GFP_KERNEL); if (buffer == NULL) { dev_err(&dev->udev->dev, "out of mem\n"); @@ -1227,38 +1243,38 @@ static int s2255_set_mode(struct s2255_dev *dev, unsigned long chn, buffer[0] = IN_DATA_TOKEN; buffer[1] = (__le32) cpu_to_le32(chn_rev); buffer[2] = CMD_SET_MODE; - memcpy(&buffer[3], &dev->mode[chn], sizeof(struct s2255_mode)); - dev->setmode_ready[chn] = 0; + memcpy(&buffer[3], &channel->mode, sizeof(struct s2255_mode)); + channel->setmode_ready = 0; res = s2255_write_config(dev->udev, (unsigned char *)buffer, 512); if (debug) s2255_print_cfg(dev, mode); kfree(buffer); /* wait at least 3 frames before continuing */ if (mode->restart) { - wait_event_timeout(dev->wait_setmode[chn], - (dev->setmode_ready[chn] != 0), + wait_event_timeout(channel->wait_setmode, + (channel->setmode_ready != 0), msecs_to_jiffies(S2255_SETMODE_TIMEOUT)); - if (dev->setmode_ready[chn] != 1) { + if (channel->setmode_ready != 1) { printk(KERN_DEBUG "s2255: no set mode response\n"); res = -EFAULT; } } /* clear the restart flag */ - dev->mode[chn].restart = 0; + channel->mode.restart = 0; mutex_unlock(&dev->lock); - dprintk(1, "%s chn %lu, result: %d\n", __func__, chn, res); + dprintk(1, "%s chn %d, result: %d\n", __func__, channel->idx, res); return res; } -static int s2255_cmd_status(struct s2255_dev *dev, unsigned long chn, - u32 *pstatus) +static int s2255_cmd_status(struct s2255_channel *channel, u32 *pstatus) { int res; __le32 *buffer; u32 chn_rev; + struct s2255_dev *dev = to_s2255_dev(channel->vdev.v4l2_dev); mutex_lock(&dev->lock); - chn_rev = G_chnmap[chn]; - dprintk(4, "%s chan %lu\n", __func__, chn); + chn_rev = G_chnmap[channel->idx]; + dprintk(4, "%s chan %d\n", __func__, channel->idx); buffer = kzalloc(512, GFP_KERNEL); if (buffer == NULL) { dev_err(&dev->udev->dev, "out of mem\n"); @@ -1270,17 +1286,17 @@ static int s2255_cmd_status(struct s2255_dev *dev, unsigned long chn, buffer[1] = (__le32) cpu_to_le32(chn_rev); buffer[2] = CMD_STATUS; *pstatus = 0; - dev->vidstatus_ready[chn] = 0; + channel->vidstatus_ready = 0; res = s2255_write_config(dev->udev, (unsigned char *)buffer, 512); kfree(buffer); - wait_event_timeout(dev->wait_vidstatus[chn], - (dev->vidstatus_ready[chn] != 0), + wait_event_timeout(channel->wait_vidstatus, + (channel->vidstatus_ready != 0), msecs_to_jiffies(S2255_VIDSTATUS_TIMEOUT)); - if (dev->vidstatus_ready[chn] != 1) { + if (channel->vidstatus_ready != 1) { printk(KERN_DEBUG "s2255: no vidstatus response\n"); res = -EFAULT; } - *pstatus = dev->vidstatus[chn]; + *pstatus = channel->vidstatus; dprintk(4, "%s, vid status %d\n", __func__, *pstatus); mutex_unlock(&dev->lock); return res; @@ -1291,9 +1307,7 @@ static int vidioc_streamon(struct file *file, void *priv, enum v4l2_buf_type i) int res; struct s2255_fh *fh = priv; struct s2255_dev *dev = fh->dev; - struct s2255_mode *new_mode; - struct s2255_mode *old_mode; - int chn; + struct s2255_channel *channel = fh->channel; int j; dprintk(4, "%s\n", __func__); if (fh->type != V4L2_BUF_TYPE_VIDEO_CAPTURE) { @@ -1305,51 +1319,32 @@ static int vidioc_streamon(struct file *file, void *priv, enum v4l2_buf_type i) return -EINVAL; } - if (!res_get(dev, fh)) { + if (!res_get(fh)) { s2255_dev_err(&dev->udev->dev, "stream busy\n"); return -EBUSY; } - - /* send a set mode command everytime with restart. - in case we switch resolutions or other parameters */ - chn = fh->channel; - new_mode = &fh->mode; - old_mode = &fh->dev->mode[chn]; - - if ((new_mode->color & MASK_COLOR) != (old_mode->color & MASK_COLOR)) - new_mode->restart = 1; - else if (new_mode->scale != old_mode->scale) - new_mode->restart = 1; - else if (new_mode->format != old_mode->format) - new_mode->restart = 1; - - s2255_set_mode(dev, chn, new_mode); - new_mode->restart = 0; - *old_mode = *new_mode; - dev->cur_fmt[chn] = fh->fmt; - dev->last_frame[chn] = -1; - dev->bad_payload[chn] = 0; - dev->cur_frame[chn] = 0; - dev->frame_count[chn] = 0; + channel->last_frame = -1; + channel->bad_payload = 0; + channel->cur_frame = 0; + channel->frame_count = 0; for (j = 0; j < SYS_FRAMES; j++) { - dev->buffer[chn].frame[j].ulState = S2255_READ_IDLE; - dev->buffer[chn].frame[j].cur_size = 0; + channel->buffer.frame[j].ulState = S2255_READ_IDLE; + channel->buffer.frame[j].cur_size = 0; } res = videobuf_streamon(&fh->vb_vidq); if (res == 0) { - s2255_start_acquire(dev, chn); - dev->b_acquire[chn] = 1; - } else { - res_free(dev, fh); - } + s2255_start_acquire(channel); + channel->b_acquire = 1; + } else + res_free(fh); + return res; } static int vidioc_streamoff(struct file *file, void *priv, enum v4l2_buf_type i) { struct s2255_fh *fh = priv; - struct s2255_dev *dev = fh->dev; - dprintk(4, "%s\n, channel: %d", __func__, fh->channel); + dprintk(4, "%s\n, channel: %d", __func__, fh->channel->idx); if (fh->type != V4L2_BUF_TYPE_VIDEO_CAPTURE) { printk(KERN_ERR "invalid fh type0\n"); return -EINVAL; @@ -1358,16 +1353,16 @@ static int vidioc_streamoff(struct file *file, void *priv, enum v4l2_buf_type i) printk(KERN_ERR "invalid type i\n"); return -EINVAL; } - s2255_stop_acquire(dev, fh->channel); + s2255_stop_acquire(fh->channel); videobuf_streamoff(&fh->vb_vidq); - res_free(dev, fh); + res_free(fh); return 0; } static int vidioc_s_std(struct file *file, void *priv, v4l2_std_id *i) { struct s2255_fh *fh = priv; - struct s2255_mode *mode; + struct s2255_mode mode; struct videobuf_queue *q = &fh->vb_vidq; int ret = 0; mutex_lock(&q->vb_lock); @@ -1376,29 +1371,32 @@ static int vidioc_s_std(struct file *file, void *priv, v4l2_std_id *i) ret = -EBUSY; goto out_s_std; } - if (res_locked(fh->dev, fh)) { + if (res_locked(fh)) { dprintk(1, "can't change standard after started\n"); ret = -EBUSY; goto out_s_std; } - mode = &fh->mode; + mode = fh->channel->mode; if (*i & V4L2_STD_NTSC) { dprintk(4, "%s NTSC\n", __func__); /* if changing format, reset frame decimation/intervals */ - if (mode->format != FORMAT_NTSC) { - mode->format = FORMAT_NTSC; - mode->fdec = FDEC_1; + if (mode.format != FORMAT_NTSC) { + mode.restart = 1; + mode.format = FORMAT_NTSC; + mode.fdec = FDEC_1; } } else if (*i & V4L2_STD_PAL) { dprintk(4, "%s PAL\n", __func__); - mode->format = FORMAT_PAL; - if (mode->format != FORMAT_PAL) { - mode->format = FORMAT_PAL; - mode->fdec = FDEC_1; + if (mode.format != FORMAT_PAL) { + mode.restart = 1; + mode.format = FORMAT_PAL; + mode.fdec = FDEC_1; } } else { ret = -EINVAL; } + if (mode.restart) + s2255_set_mode(fh->channel, &mode); out_s_std: mutex_unlock(&q->vb_lock); return ret; @@ -1416,6 +1414,7 @@ static int vidioc_enum_input(struct file *file, void *priv, { struct s2255_fh *fh = priv; struct s2255_dev *dev = fh->dev; + struct s2255_channel *channel = fh->channel; u32 status = 0; if (inp->index != 0) return -EINVAL; @@ -1424,7 +1423,7 @@ static int vidioc_enum_input(struct file *file, void *priv, inp->status = 0; if (dev->dsp_fw_ver >= S2255_MIN_DSP_STATUS) { int rc; - rc = s2255_cmd_status(dev, fh->channel, &status); + rc = s2255_cmd_status(fh->channel, &status); dprintk(4, "s2255_cmd_status rc: %d status %x\n", rc, status); if (rc == 0) inp->status = (status & 0x01) ? 0 @@ -1436,7 +1435,7 @@ static int vidioc_enum_input(struct file *file, void *priv, strlcpy(inp->name, "Composite", sizeof(inp->name)); break; case 0x2257: - strlcpy(inp->name, (fh->channel < 2) ? "Composite" : "S-Video", + strlcpy(inp->name, (channel->idx < 2) ? "Composite" : "S-Video", sizeof(inp->name)); break; } @@ -1460,6 +1459,7 @@ static int vidioc_queryctrl(struct file *file, void *priv, struct v4l2_queryctrl *qc) { struct s2255_fh *fh = priv; + struct s2255_channel *channel = fh->channel; struct s2255_dev *dev = fh->dev; switch (qc->id) { case V4L2_CID_BRIGHTNESS: @@ -1477,7 +1477,7 @@ static int vidioc_queryctrl(struct file *file, void *priv, case V4L2_CID_PRIVATE_COLORFILTER: if (dev->dsp_fw_ver < S2255_MIN_DSP_COLORFILTER) return -EINVAL; - if ((dev->pid == 0x2257) && (fh->channel > 1)) + if ((dev->pid == 0x2257) && (channel->idx > 1)) return -EINVAL; strlcpy(qc->name, "Color Filter", sizeof(qc->name)); qc->type = V4L2_CTRL_TYPE_MENU; @@ -1499,25 +1499,26 @@ static int vidioc_g_ctrl(struct file *file, void *priv, { struct s2255_fh *fh = priv; struct s2255_dev *dev = fh->dev; + struct s2255_channel *channel = fh->channel; switch (ctrl->id) { case V4L2_CID_BRIGHTNESS: - ctrl->value = fh->mode.bright; + ctrl->value = channel->mode.bright; break; case V4L2_CID_CONTRAST: - ctrl->value = fh->mode.contrast; + ctrl->value = channel->mode.contrast; break; case V4L2_CID_SATURATION: - ctrl->value = fh->mode.saturation; + ctrl->value = channel->mode.saturation; break; case V4L2_CID_HUE: - ctrl->value = fh->mode.hue; + ctrl->value = channel->mode.hue; break; case V4L2_CID_PRIVATE_COLORFILTER: if (dev->dsp_fw_ver < S2255_MIN_DSP_COLORFILTER) return -EINVAL; - if ((dev->pid == 0x2257) && (fh->channel > 1)) + if ((dev->pid == 0x2257) && (channel->idx > 1)) return -EINVAL; - ctrl->value = !((fh->mode.color & MASK_INPUT_TYPE) >> 16); + ctrl->value = !((channel->mode.color & MASK_INPUT_TYPE) >> 16); break; default: return -EINVAL; @@ -1530,41 +1531,42 @@ static int vidioc_s_ctrl(struct file *file, void *priv, struct v4l2_control *ctrl) { struct s2255_fh *fh = priv; - struct s2255_dev *dev = fh->dev; - struct s2255_mode *mode; - mode = &fh->mode; + struct s2255_channel *channel = fh->channel; + struct s2255_dev *dev = to_s2255_dev(channel->vdev.v4l2_dev); + struct s2255_mode mode; + mode = channel->mode; dprintk(4, "%s\n", __func__); /* update the mode to the corresponding value */ switch (ctrl->id) { case V4L2_CID_BRIGHTNESS: - mode->bright = ctrl->value; + mode.bright = ctrl->value; break; case V4L2_CID_CONTRAST: - mode->contrast = ctrl->value; + mode.contrast = ctrl->value; break; case V4L2_CID_HUE: - mode->hue = ctrl->value; + mode.hue = ctrl->value; break; case V4L2_CID_SATURATION: - mode->saturation = ctrl->value; + mode.saturation = ctrl->value; break; case V4L2_CID_PRIVATE_COLORFILTER: if (dev->dsp_fw_ver < S2255_MIN_DSP_COLORFILTER) return -EINVAL; - if ((dev->pid == 0x2257) && (fh->channel > 1)) + if ((dev->pid == 0x2257) && (channel->idx > 1)) return -EINVAL; - mode->color &= ~MASK_INPUT_TYPE; - mode->color |= ((ctrl->value ? 0 : 1) << 16); + mode.color &= ~MASK_INPUT_TYPE; + mode.color |= ((ctrl->value ? 0 : 1) << 16); break; default: return -EINVAL; } - mode->restart = 0; + mode.restart = 0; /* set mode here. Note: stream does not need restarted. some V4L programs restart stream unnecessarily after a s_crtl. */ - s2255_set_mode(dev, fh->channel, mode); + s2255_set_mode(fh->channel, &mode); return 0; } @@ -1572,8 +1574,8 @@ static int vidioc_g_jpegcomp(struct file *file, void *priv, struct v4l2_jpegcompression *jc) { struct s2255_fh *fh = priv; - struct s2255_dev *dev = fh->dev; - *jc = dev->jc[fh->channel]; + struct s2255_channel *channel = fh->channel; + *jc = channel->jc; dprintk(2, "%s: quality %d\n", __func__, jc->quality); return 0; } @@ -1582,10 +1584,10 @@ static int vidioc_s_jpegcomp(struct file *file, void *priv, struct v4l2_jpegcompression *jc) { struct s2255_fh *fh = priv; - struct s2255_dev *dev = fh->dev; + struct s2255_channel *channel = fh->channel; if (jc->quality < 0 || jc->quality > 100) return -EINVAL; - dev->jc[fh->channel].quality = jc->quality; + channel->jc.quality = jc->quality; dprintk(2, "%s: quality %d\n", __func__, jc->quality); return 0; } @@ -1594,17 +1596,17 @@ static int vidioc_g_parm(struct file *file, void *priv, struct v4l2_streamparm *sp) { struct s2255_fh *fh = priv; - struct s2255_dev *dev = fh->dev; __u32 def_num, def_dem; + struct s2255_channel *channel = fh->channel; if (sp->type != V4L2_BUF_TYPE_VIDEO_CAPTURE) return -EINVAL; memset(sp, 0, sizeof(struct v4l2_streamparm)); sp->parm.capture.capability = V4L2_CAP_TIMEPERFRAME; - sp->parm.capture.capturemode = dev->cap_parm[fh->channel].capturemode; - def_num = (fh->mode.format == FORMAT_NTSC) ? 1001 : 1000; - def_dem = (fh->mode.format == FORMAT_NTSC) ? 30000 : 25000; + sp->parm.capture.capturemode = channel->cap_parm.capturemode; + def_num = (channel->mode.format == FORMAT_NTSC) ? 1001 : 1000; + def_dem = (channel->mode.format == FORMAT_NTSC) ? 30000 : 25000; sp->parm.capture.timeperframe.denominator = def_dem; - switch (fh->mode.fdec) { + switch (channel->mode.fdec) { default: case FDEC_1: sp->parm.capture.timeperframe.numerator = def_num; @@ -1630,17 +1632,19 @@ static int vidioc_s_parm(struct file *file, void *priv, struct v4l2_streamparm *sp) { struct s2255_fh *fh = priv; - struct s2255_dev *dev = fh->dev; + struct s2255_channel *channel = fh->channel; + struct s2255_mode mode; int fdec = FDEC_1; __u32 def_num, def_dem; if (sp->type != V4L2_BUF_TYPE_VIDEO_CAPTURE) return -EINVAL; + mode = channel->mode; /* high quality capture mode requires a stream restart */ - if (dev->cap_parm[fh->channel].capturemode - != sp->parm.capture.capturemode && res_locked(fh->dev, fh)) + if (channel->cap_parm.capturemode + != sp->parm.capture.capturemode && res_locked(fh)) return -EBUSY; - def_num = (fh->mode.format == FORMAT_NTSC) ? 1001 : 1000; - def_dem = (fh->mode.format == FORMAT_NTSC) ? 30000 : 25000; + def_num = (mode.format == FORMAT_NTSC) ? 1001 : 1000; + def_dem = (mode.format == FORMAT_NTSC) ? 30000 : 25000; if (def_dem != sp->parm.capture.timeperframe.denominator) sp->parm.capture.timeperframe.numerator = def_num; else if (sp->parm.capture.timeperframe.numerator <= def_num) @@ -1655,9 +1659,9 @@ static int vidioc_s_parm(struct file *file, void *priv, sp->parm.capture.timeperframe.numerator = def_num * 5; fdec = FDEC_5; } - fh->mode.fdec = fdec; + mode.fdec = fdec; sp->parm.capture.timeperframe.denominator = def_dem; - s2255_set_mode(dev, fh->channel, &fh->mode); + s2255_set_mode(channel, &mode); dprintk(4, "%s capture mode, %d timeperframe %d/%d, fdec %d\n", __func__, sp->parm.capture.capturemode, @@ -1707,24 +1711,13 @@ static int vidioc_enum_frameintervals(struct file *file, void *priv, static int s2255_open(struct file *file) { struct video_device *vdev = video_devdata(file); - struct s2255_dev *dev = video_drvdata(file); + struct s2255_channel *channel = video_drvdata(file); + struct s2255_dev *dev = to_s2255_dev(vdev->v4l2_dev); struct s2255_fh *fh; enum v4l2_buf_type type = V4L2_BUF_TYPE_VIDEO_CAPTURE; - int i = 0; - int cur_channel = -1; int state; dprintk(1, "s2255: open called (dev=%s)\n", video_device_node_name(vdev)); - - for (i = 0; i < MAX_CHANNELS; i++) { - if (&dev->vdev[i] == vdev) { - cur_channel = i; - break; - } - } - if (i == MAX_CHANNELS) - return -ENODEV; - /* * open lock necessary to prevent multiple instances * of v4l-conf (or other programs) from simultaneously @@ -1806,24 +1799,20 @@ static int s2255_open(struct file *file) file->private_data = fh; fh->dev = dev; fh->type = V4L2_BUF_TYPE_VIDEO_CAPTURE; - fh->mode = dev->mode[cur_channel]; - fh->fmt = dev->cur_fmt[cur_channel]; - /* default 4CIF NTSC */ - fh->width = LINE_SZ_4CIFS_NTSC; - fh->height = NUM_LINES_4CIFS_NTSC * 2; - fh->channel = cur_channel; - /* configure channel to default state */ - if (!dev->chn_configured[cur_channel]) { - s2255_set_mode(dev, cur_channel, &fh->mode); - dev->chn_configured[cur_channel] = 1; + fh->channel = channel; + if (!channel->configured) { + /* configure channel to default state */ + channel->fmt = &formats[0]; + s2255_set_mode(channel, &channel->mode); + channel->configured = 1; } dprintk(1, "%s: dev=%s type=%s\n", __func__, video_device_node_name(vdev), v4l2_type_names[type]); dprintk(2, "%s: fh=0x%08lx, dev=0x%08lx, vidq=0x%08lx\n", __func__, (unsigned long)fh, (unsigned long)dev, - (unsigned long)&dev->vidq[cur_channel]); + (unsigned long)&channel->vidq); dprintk(4, "%s: list_empty active=%d\n", __func__, - list_empty(&dev->vidq[cur_channel].active)); + list_empty(&channel->vidq.active)); videobuf_queue_vmalloc_init(&fh->vb_vidq, &s2255_video_qops, NULL, &dev->slock, fh->type, @@ -1865,6 +1854,7 @@ static void s2255_destroy(struct s2255_dev *dev) mutex_destroy(&dev->open_lock); mutex_destroy(&dev->lock); usb_put_dev(dev->udev); + v4l2_device_unregister(&dev->v4l2_dev); dprintk(1, "%s", __func__); kfree(dev); } @@ -1874,14 +1864,15 @@ static int s2255_release(struct file *file) struct s2255_fh *fh = file->private_data; struct s2255_dev *dev = fh->dev; struct video_device *vdev = video_devdata(file); + struct s2255_channel *channel = fh->channel; if (!dev) return -ENODEV; /* turn off stream */ if (res_check(fh)) { - if (dev->b_acquire[fh->channel]) - s2255_stop_acquire(dev, fh->channel); + if (channel->b_acquire) + s2255_stop_acquire(fh->channel); videobuf_streamoff(&fh->vb_vidq); - res_free(dev, fh); + res_free(fh); } videobuf_mmap_free(&fh->vb_vidq); dprintk(1, "%s (dev=%s)\n", __func__, video_device_node_name(vdev)); @@ -1945,9 +1936,10 @@ static const struct v4l2_ioctl_ops s2255_ioctl_ops = { static void s2255_video_device_release(struct video_device *vdev) { - struct s2255_dev *dev = video_get_drvdata(vdev); - dprintk(4, "%s, chnls: %d \n", __func__, atomic_read(&dev->channels)); - if (atomic_dec_and_test(&dev->channels)) + struct s2255_dev *dev = to_s2255_dev(vdev->v4l2_dev); + dprintk(4, "%s, chnls: %d \n", __func__, + atomic_read(&dev->num_channels)); + if (atomic_dec_and_test(&dev->num_channels)) s2255_destroy(dev); return; } @@ -1966,47 +1958,48 @@ static int s2255_probe_v4l(struct s2255_dev *dev) int ret; int i; int cur_nr = video_nr; + struct s2255_channel *channel; ret = v4l2_device_register(&dev->interface->dev, &dev->v4l2_dev); if (ret) return ret; /* initialize all video 4 linux */ /* register 4 video devices */ for (i = 0; i < MAX_CHANNELS; i++) { - INIT_LIST_HEAD(&dev->vidq[i].active); - dev->vidq[i].dev = dev; - dev->vidq[i].channel = i; + channel = &dev->channel[i]; + INIT_LIST_HEAD(&channel->vidq.active); + channel->vidq.dev = dev; /* register 4 video devices */ - memcpy(&dev->vdev[i], &template, sizeof(struct video_device)); - dev->vdev[i].v4l2_dev = &dev->v4l2_dev; - video_set_drvdata(&dev->vdev[i], dev); + channel->vdev = template; + channel->vdev.v4l2_dev = &dev->v4l2_dev; + video_set_drvdata(&channel->vdev, channel); if (video_nr == -1) - ret = video_register_device(&dev->vdev[i], + ret = video_register_device(&channel->vdev, VFL_TYPE_GRABBER, video_nr); else - ret = video_register_device(&dev->vdev[i], + ret = video_register_device(&channel->vdev, VFL_TYPE_GRABBER, cur_nr + i); + if (ret) { dev_err(&dev->udev->dev, "failed to register video device!\n"); break; } - atomic_inc(&dev->channels); + atomic_inc(&dev->num_channels); v4l2_info(&dev->v4l2_dev, "V4L2 device registered as %s\n", - video_device_node_name(&dev->vdev[i])); + video_device_node_name(&channel->vdev)); } - printk(KERN_INFO "Sensoray 2255 V4L driver Revision: %d.%d\n", S2255_MAJOR_VERSION, S2255_MINOR_VERSION); /* if no channels registered, return error and probe will fail*/ - if (atomic_read(&dev->channels) == 0) { + if (atomic_read(&dev->num_channels) == 0) { v4l2_device_unregister(&dev->v4l2_dev); return ret; } - if (atomic_read(&dev->channels) != MAX_CHANNELS) + if (atomic_read(&dev->num_channels) != MAX_CHANNELS) printk(KERN_WARNING "s2255: Not all channels available.\n"); return 0; } @@ -2033,12 +2026,11 @@ static int save_frame(struct s2255_dev *dev, struct s2255_pipeinfo *pipe_info) s32 idx = -1; struct s2255_framei *frm; unsigned char *pdata; - + struct s2255_channel *channel; dprintk(100, "buffer to user\n"); - - idx = dev->cur_frame[dev->cc]; - frm = &dev->buffer[dev->cc].frame[idx]; - + channel = &dev->channel[dev->cc]; + idx = channel->cur_frame; + frm = &channel->buffer.frame[idx]; if (frm->ulState == S2255_READ_IDLE) { int jj; unsigned int cc; @@ -2063,16 +2055,18 @@ static int save_frame(struct s2255_dev *dev, struct s2255_pipeinfo *pipe_info) } /* reverse it */ dev->cc = G_chnmap[cc]; + channel = &dev->channel[dev->cc]; payload = pdword[3]; - if (payload > dev->req_image_size[dev->cc]) { - dev->bad_payload[dev->cc]++; + if (payload > channel->req_image_size) { + channel->bad_payload++; /* discard the bad frame */ return -EINVAL; } - dev->pkt_size[dev->cc] = payload; - dev->jpg_size[dev->cc] = pdword[4]; + channel->pkt_size = payload; + channel->jpg_size = pdword[4]; break; case S2255_MARKER_RESPONSE: + pdata += DEF_USB_BLOCK; jj += DEF_USB_BLOCK; if (pdword[1] >= MAX_CHANNELS) @@ -2080,12 +2074,13 @@ static int save_frame(struct s2255_dev *dev, struct s2255_pipeinfo *pipe_info) cc = G_chnmap[pdword[1]]; if (cc >= MAX_CHANNELS) break; + channel = &dev->channel[cc]; switch (pdword[2]) { case S2255_RESPONSE_SETMODE: /* check if channel valid */ /* set mode ready */ - dev->setmode_ready[cc] = 1; - wake_up(&dev->wait_setmode[cc]); + channel->setmode_ready = 1; + wake_up(&channel->wait_setmode); dprintk(5, "setmode ready %d\n", cc); break; case S2255_RESPONSE_FW: @@ -2099,9 +2094,9 @@ static int save_frame(struct s2255_dev *dev, struct s2255_pipeinfo *pipe_info) wake_up(&dev->fw_data->wait_fw); break; case S2255_RESPONSE_STATUS: - dev->vidstatus[cc] = pdword[3]; - dev->vidstatus_ready[cc] = 1; - wake_up(&dev->wait_vidstatus[cc]); + channel->vidstatus = pdword[3]; + channel->vidstatus_ready = 1; + wake_up(&channel->wait_vidstatus); dprintk(5, "got vidstatus %x chan %d\n", pdword[3], cc); break; @@ -2118,13 +2113,11 @@ static int save_frame(struct s2255_dev *dev, struct s2255_pipeinfo *pipe_info) if (!bframe) return -EINVAL; } - - - idx = dev->cur_frame[dev->cc]; - frm = &dev->buffer[dev->cc].frame[idx]; - + channel = &dev->channel[dev->cc]; + idx = channel->cur_frame; + frm = &channel->buffer.frame[idx]; /* search done. now find out if should be acquiring on this channel */ - if (!dev->b_acquire[dev->cc]) { + if (!channel->b_acquire) { /* we found a frame, but this channel is turned off */ frm->ulState = S2255_READ_IDLE; return -EINVAL; @@ -2149,30 +2142,28 @@ static int save_frame(struct s2255_dev *dev, struct s2255_pipeinfo *pipe_info) copy_size = (pipe_info->cur_transfer_size - offset); - size = dev->pkt_size[dev->cc] - PREFIX_SIZE; + size = channel->pkt_size - PREFIX_SIZE; /* sanity check on pdest */ - if ((copy_size + frm->cur_size) < dev->req_image_size[dev->cc]) + if ((copy_size + frm->cur_size) < channel->req_image_size) memcpy(pdest, psrc, copy_size); frm->cur_size += copy_size; dprintk(4, "cur_size size %lu size %lu \n", frm->cur_size, size); if (frm->cur_size >= size) { - - u32 cc = dev->cc; dprintk(2, "****************[%d]Buffer[%d]full*************\n", - cc, idx); - dev->last_frame[cc] = dev->cur_frame[cc]; - dev->cur_frame[cc]++; + dev->cc, idx); + channel->last_frame = channel->cur_frame; + channel->cur_frame++; /* end of system frame ring buffer, start at zero */ - if ((dev->cur_frame[cc] == SYS_FRAMES) || - (dev->cur_frame[cc] == dev->buffer[cc].dwFrames)) - dev->cur_frame[cc] = 0; + if ((channel->cur_frame == SYS_FRAMES) || + (channel->cur_frame == channel->buffer.dwFrames)) + channel->cur_frame = 0; /* frame ready */ - if (dev->b_acquire[cc]) - s2255_got_frame(dev, cc, dev->jpg_size[cc]); - dev->frame_count[cc]++; + if (channel->b_acquire) + s2255_got_frame(channel, channel->jpg_size); + channel->frame_count++; frm->ulState = S2255_READ_IDLE; frm->cur_size = 0; @@ -2245,16 +2236,12 @@ static int s2255_get_fx2fw(struct s2255_dev *dev) * Create the system ring buffer to copy frames into from the * usb read pipe. */ -static int s2255_create_sys_buffers(struct s2255_dev *dev, unsigned long chn) +static int s2255_create_sys_buffers(struct s2255_channel *channel) { unsigned long i; unsigned long reqsize; dprintk(1, "create sys buffers\n"); - if (chn >= MAX_CHANNELS) - return -1; - - dev->buffer[chn].dwFrames = SYS_FRAMES; - + channel->buffer.dwFrames = SYS_FRAMES; /* always allocate maximum size(PAL) for system buffers */ reqsize = SYS_FRAMES_MAXSIZE; @@ -2263,42 +2250,40 @@ static int s2255_create_sys_buffers(struct s2255_dev *dev, unsigned long chn) for (i = 0; i < SYS_FRAMES; i++) { /* allocate the frames */ - dev->buffer[chn].frame[i].lpvbits = vmalloc(reqsize); - - dprintk(1, "valloc %p chan %lu, idx %lu, pdata %p\n", - &dev->buffer[chn].frame[i], chn, i, - dev->buffer[chn].frame[i].lpvbits); - dev->buffer[chn].frame[i].size = reqsize; - if (dev->buffer[chn].frame[i].lpvbits == NULL) { + channel->buffer.frame[i].lpvbits = vmalloc(reqsize); + dprintk(1, "valloc %p chan %d, idx %lu, pdata %p\n", + &channel->buffer.frame[i], channel->idx, i, + channel->buffer.frame[i].lpvbits); + channel->buffer.frame[i].size = reqsize; + if (channel->buffer.frame[i].lpvbits == NULL) { printk(KERN_INFO "out of memory. using less frames\n"); - dev->buffer[chn].dwFrames = i; + channel->buffer.dwFrames = i; break; } } /* make sure internal states are set */ for (i = 0; i < SYS_FRAMES; i++) { - dev->buffer[chn].frame[i].ulState = 0; - dev->buffer[chn].frame[i].cur_size = 0; + channel->buffer.frame[i].ulState = 0; + channel->buffer.frame[i].cur_size = 0; } - dev->cur_frame[chn] = 0; - dev->last_frame[chn] = -1; + channel->cur_frame = 0; + channel->last_frame = -1; return 0; } -static int s2255_release_sys_buffers(struct s2255_dev *dev, - unsigned long channel) +static int s2255_release_sys_buffers(struct s2255_channel *channel) { unsigned long i; dprintk(1, "release sys buffers\n"); for (i = 0; i < SYS_FRAMES; i++) { - if (dev->buffer[channel].frame[i].lpvbits) { + if (channel->buffer.frame[i].lpvbits) { dprintk(1, "vfree %p\n", - dev->buffer[channel].frame[i].lpvbits); - vfree(dev->buffer[channel].frame[i].lpvbits); + channel->buffer.frame[i].lpvbits); + vfree(channel->buffer.frame[i].lpvbits); } - dev->buffer[channel].frame[i].lpvbits = NULL; + channel->buffer.frame[i].lpvbits = NULL; } return 0; } @@ -2335,17 +2320,20 @@ static int s2255_board_init(struct s2255_dev *dev) fw_ver & 0xff); for (j = 0; j < MAX_CHANNELS; j++) { - dev->b_acquire[j] = 0; - dev->mode[j] = mode_def; + struct s2255_channel *channel = &dev->channel[j]; + channel->b_acquire = 0; + channel->mode = mode_def; if (dev->pid == 0x2257 && j > 1) - dev->mode[j].color |= (1 << 16); - dev->jc[j].quality = S2255_DEF_JPEG_QUAL; - dev->cur_fmt[j] = &formats[0]; - dev->mode[j].restart = 1; - dev->req_image_size[j] = get_transfer_size(&mode_def); - dev->frame_count[j] = 0; + channel->mode.color |= (1 << 16); + channel->jc.quality = S2255_DEF_JPEG_QUAL; + channel->width = LINE_SZ_4CIFS_NTSC; + channel->height = NUM_LINES_4CIFS_NTSC * 2; + channel->fmt = &formats[0]; + channel->mode.restart = 1; + channel->req_image_size = get_transfer_size(&mode_def); + channel->frame_count = 0; /* create the system buffers */ - s2255_create_sys_buffers(dev, j); + s2255_create_sys_buffers(channel); } /* start read pipe */ s2255_start_readpipe(dev); @@ -2359,14 +2347,12 @@ static int s2255_board_shutdown(struct s2255_dev *dev) dprintk(1, "%s: dev: %p", __func__, dev); for (i = 0; i < MAX_CHANNELS; i++) { - if (dev->b_acquire[i]) - s2255_stop_acquire(dev, i); + if (dev->channel[i].b_acquire) + s2255_stop_acquire(&dev->channel[i]); } - s2255_stop_readpipe(dev); - for (i = 0; i < MAX_CHANNELS; i++) - s2255_release_sys_buffers(dev, i); + s2255_release_sys_buffers(&dev->channel[i]); /* release transfer buffer */ kfree(dev->pipe.transfer_buffer); return 0; @@ -2459,29 +2445,26 @@ static int s2255_start_readpipe(struct s2255_dev *dev) } /* starts acquisition process */ -static int s2255_start_acquire(struct s2255_dev *dev, unsigned long chn) +static int s2255_start_acquire(struct s2255_channel *channel) { unsigned char *buffer; int res; unsigned long chn_rev; int j; - if (chn >= MAX_CHANNELS) { - dprintk(2, "start acquire failed, bad channel %lu\n", chn); - return -1; - } - chn_rev = G_chnmap[chn]; + struct s2255_dev *dev = to_s2255_dev(channel->vdev.v4l2_dev); + chn_rev = G_chnmap[channel->idx]; buffer = kzalloc(512, GFP_KERNEL); if (buffer == NULL) { dev_err(&dev->udev->dev, "out of mem\n"); return -ENOMEM; } - dev->last_frame[chn] = -1; - dev->bad_payload[chn] = 0; - dev->cur_frame[chn] = 0; + channel->last_frame = -1; + channel->bad_payload = 0; + channel->cur_frame = 0; for (j = 0; j < SYS_FRAMES; j++) { - dev->buffer[chn].frame[j].ulState = 0; - dev->buffer[chn].frame[j].cur_size = 0; + channel->buffer.frame[j].ulState = 0; + channel->buffer.frame[j].cur_size = 0; } /* send the start command */ @@ -2492,21 +2475,18 @@ static int s2255_start_acquire(struct s2255_dev *dev, unsigned long chn) if (res != 0) dev_err(&dev->udev->dev, "CMD_START error\n"); - dprintk(2, "start acquire exit[%lu] %d \n", chn, res); + dprintk(2, "start acquire exit[%d] %d \n", channel->idx, res); kfree(buffer); return 0; } -static int s2255_stop_acquire(struct s2255_dev *dev, unsigned long chn) +static int s2255_stop_acquire(struct s2255_channel *channel) { unsigned char *buffer; int res; unsigned long chn_rev; - if (chn >= MAX_CHANNELS) { - dprintk(2, "stop acquire failed, bad channel %lu\n", chn); - return -1; - } - chn_rev = G_chnmap[chn]; + struct s2255_dev *dev = to_s2255_dev(channel->vdev.v4l2_dev); + chn_rev = G_chnmap[channel->idx]; buffer = kzalloc(512, GFP_KERNEL); if (buffer == NULL) { dev_err(&dev->udev->dev, "out of mem\n"); @@ -2520,8 +2500,8 @@ static int s2255_stop_acquire(struct s2255_dev *dev, unsigned long chn) if (res != 0) dev_err(&dev->udev->dev, "CMD_STOP error\n"); kfree(buffer); - dev->b_acquire[chn] = 0; - dprintk(4, "%s: chn %lu, res %d\n", __func__, chn, res); + channel->b_acquire = 0; + dprintk(4, "%s: chn %d, res %d\n", __func__, channel->idx, res); return res; } @@ -2575,7 +2555,7 @@ static int s2255_probe(struct usb_interface *interface, s2255_dev_err(&interface->dev, "out of memory\n"); return -ENOMEM; } - atomic_set(&dev->channels, 0); + atomic_set(&dev->num_channels, 0); dev->pid = id->idProduct; dev->fw_data = kzalloc(sizeof(struct s2255_fw), GFP_KERNEL); if (!dev->fw_data) @@ -2612,8 +2592,10 @@ static int s2255_probe(struct usb_interface *interface, dev->timer.data = (unsigned long)dev->fw_data; init_waitqueue_head(&dev->fw_data->wait_fw); for (i = 0; i < MAX_CHANNELS; i++) { - init_waitqueue_head(&dev->wait_setmode[i]); - init_waitqueue_head(&dev->wait_vidstatus[i]); + struct s2255_channel *channel = &dev->channel[i]; + dev->channel[i].idx = i; + init_waitqueue_head(&channel->wait_setmode); + init_waitqueue_head(&channel->wait_vidstatus); } dev->fw_data->fw_urb = usb_alloc_urb(0, GFP_KERNEL); @@ -2651,7 +2633,7 @@ static int s2255_probe(struct usb_interface *interface, printk(KERN_INFO "s2255: f2255usb.bin out of date.\n"); if (dev->pid == 0x2257 && *pRel < S2255_MIN_DSP_COLORFILTER) printk(KERN_WARNING "s2255: 2257 requires firmware %d" - "or above.\n", S2255_MIN_DSP_COLORFILTER); + " or above.\n", S2255_MIN_DSP_COLORFILTER); } usb_reset_device(dev->udev); /* load 2255 board specific */ @@ -2693,25 +2675,23 @@ static void s2255_disconnect(struct usb_interface *interface) { struct s2255_dev *dev = to_s2255_dev(usb_get_intfdata(interface)); int i; - int channels = atomic_read(&dev->channels); - v4l2_device_unregister(&dev->v4l2_dev); + int channels = atomic_read(&dev->num_channels); + v4l2_device_disconnect(&dev->v4l2_dev); /*see comments in the uvc_driver.c usb disconnect function */ - atomic_inc(&dev->channels); + atomic_inc(&dev->num_channels); /* unregister each video device. */ - for (i = 0; i < channels; i++) { - if (video_is_registered(&dev->vdev[i])) - video_unregister_device(&dev->vdev[i]); - } + for (i = 0; i < channels; i++) + video_unregister_device(&dev->channel[i].vdev); /* wake up any of our timers */ atomic_set(&dev->fw_data->fw_state, S2255_FW_DISCONNECTING); wake_up(&dev->fw_data->wait_fw); for (i = 0; i < MAX_CHANNELS; i++) { - dev->setmode_ready[i] = 1; - wake_up(&dev->wait_setmode[i]); - dev->vidstatus_ready[i] = 1; - wake_up(&dev->wait_vidstatus[i]); + dev->channel[i].setmode_ready = 1; + wake_up(&dev->channel[i].wait_setmode); + dev->channel[i].vidstatus_ready = 1; + wake_up(&dev->channel[i].wait_vidstatus); } - if (atomic_dec_and_test(&dev->channels)) + if (atomic_dec_and_test(&dev->num_channels)) s2255_destroy(dev); dev_info(&interface->dev, "%s\n", __func__); } diff --git a/drivers/media/video/saa7134/saa7134-alsa.c b/drivers/media/video/saa7134/saa7134-alsa.c index d3bd82ad010..10460fd3ce3 100644 --- a/drivers/media/video/saa7134/saa7134-alsa.c +++ b/drivers/media/video/saa7134/saa7134-alsa.c @@ -630,7 +630,7 @@ static int snd_card_saa7134_hw_params(struct snd_pcm_substream * substream, /* release the old buffer */ if (substream->runtime->dma_area) { saa7134_pgtable_free(dev->pci, &dev->dmasound.pt); - videobuf_sg_dma_unmap(&dev->pci->dev, &dev->dmasound.dma); + videobuf_dma_unmap(&dev->pci->dev, &dev->dmasound.dma); dsp_buffer_free(dev); substream->runtime->dma_area = NULL; } @@ -646,12 +646,12 @@ static int snd_card_saa7134_hw_params(struct snd_pcm_substream * substream, return err; } - if (0 != (err = videobuf_sg_dma_map(&dev->pci->dev, &dev->dmasound.dma))) { + if (0 != (err = videobuf_dma_map(&dev->pci->dev, &dev->dmasound.dma))) { dsp_buffer_free(dev); return err; } if (0 != (err = saa7134_pgtable_alloc(dev->pci,&dev->dmasound.pt))) { - videobuf_sg_dma_unmap(&dev->pci->dev, &dev->dmasound.dma); + videobuf_dma_unmap(&dev->pci->dev, &dev->dmasound.dma); dsp_buffer_free(dev); return err; } @@ -660,7 +660,7 @@ static int snd_card_saa7134_hw_params(struct snd_pcm_substream * substream, dev->dmasound.dma.sglen, 0))) { saa7134_pgtable_free(dev->pci, &dev->dmasound.pt); - videobuf_sg_dma_unmap(&dev->pci->dev, &dev->dmasound.dma); + videobuf_dma_unmap(&dev->pci->dev, &dev->dmasound.dma); dsp_buffer_free(dev); return err; } @@ -669,7 +669,7 @@ static int snd_card_saa7134_hw_params(struct snd_pcm_substream * substream, byte, but it doesn't work. So I allocate the DMA using the V4L functions, and force ALSA to use that as the DMA area */ - substream->runtime->dma_area = dev->dmasound.dma.vmalloc; + substream->runtime->dma_area = dev->dmasound.dma.vaddr; substream->runtime->dma_bytes = dev->dmasound.bufsize; substream->runtime->dma_addr = 0; @@ -696,7 +696,7 @@ static int snd_card_saa7134_hw_free(struct snd_pcm_substream * substream) if (substream->runtime->dma_area) { saa7134_pgtable_free(dev->pci, &dev->dmasound.pt); - videobuf_sg_dma_unmap(&dev->pci->dev, &dev->dmasound.dma); + videobuf_dma_unmap(&dev->pci->dev, &dev->dmasound.dma); dsp_buffer_free(dev); substream->runtime->dma_area = NULL; } @@ -1080,7 +1080,7 @@ static int alsa_card_saa7134_create(struct saa7134_dev *dev, int devnum) /* Card "creation" */ card->private_free = snd_saa7134_free; - chip = (snd_card_saa7134_t *) card->private_data; + chip = card->private_data; spin_lock_init(&chip->lock); spin_lock_init(&chip->mixer_lock); diff --git a/drivers/media/video/saa7134/saa7134-cards.c b/drivers/media/video/saa7134/saa7134-cards.c index 07f6bb8ef9d..ec697fcd406 100644 --- a/drivers/media/video/saa7134/saa7134-cards.c +++ b/drivers/media/video/saa7134/saa7134-cards.c @@ -5462,6 +5462,30 @@ struct saa7134_board saa7134_boards[] = { .amux = TV, }, }, + [SAA7134_BOARD_TECHNOTREND_BUDGET_T3000] = { + .name = "TechoTrend TT-budget T-3000", + .tuner_type = TUNER_PHILIPS_TD1316, + .audio_clock = 0x00187de7, + .radio_type = UNSET, + .tuner_addr = 0x63, + .radio_addr = ADDR_UNSET, + .tda9887_conf = TDA9887_PRESENT | TDA9887_PORT1_ACTIVE, + .mpeg = SAA7134_MPEG_DVB, + .inputs = {{ + .name = name_tv, + .vmux = 3, + .amux = TV, + .tv = 1, + }, { + .name = name_comp1, + .vmux = 0, + .amux = LINE2, + }, { + .name = name_svideo, + .vmux = 8, + .amux = LINE2, + } }, + }, }; @@ -6631,6 +6655,12 @@ struct pci_device_id saa7134_pci_tbl[] = { .subdevice = 0x6655, .driver_data = SAA7134_BOARD_LEADTEK_WINFAST_DTV1000S, }, { + .vendor = PCI_VENDOR_ID_PHILIPS, + .device = PCI_DEVICE_ID_PHILIPS_SAA7133, + .subvendor = 0x13c2, + .subdevice = 0x2804, + .driver_data = SAA7134_BOARD_TECHNOTREND_BUDGET_T3000, + }, { /* --- boards without eeprom + subsystem ID --- */ .vendor = PCI_VENDOR_ID_PHILIPS, .device = PCI_DEVICE_ID_PHILIPS_SAA7134, @@ -7320,6 +7350,7 @@ int saa7134_board_init2(struct saa7134_dev *dev) case SAA7134_BOARD_VIDEOMATE_DVBT_300: case SAA7134_BOARD_ASUS_EUROPA2_HYBRID: case SAA7134_BOARD_ASUS_EUROPA_HYBRID: + case SAA7134_BOARD_TECHNOTREND_BUDGET_T3000: { /* The Philips EUROPA based hybrid boards have the tuner diff --git a/drivers/media/video/saa7134/saa7134-core.c b/drivers/media/video/saa7134/saa7134-core.c index 90f23188129..40bc635e8a3 100644 --- a/drivers/media/video/saa7134/saa7134-core.c +++ b/drivers/media/video/saa7134/saa7134-core.c @@ -256,7 +256,7 @@ void saa7134_dma_free(struct videobuf_queue *q,struct saa7134_buf *buf) BUG_ON(in_interrupt()); videobuf_waiton(&buf->vb,0,0); - videobuf_dma_unmap(q, dma); + videobuf_dma_unmap(q->dev, dma); videobuf_dma_free(dma); buf->vb.state = VIDEOBUF_NEEDS_INIT; } diff --git a/drivers/media/video/saa7134/saa7134-dvb.c b/drivers/media/video/saa7134/saa7134-dvb.c index 31e82be1b7e..f26fe7661a1 100644 --- a/drivers/media/video/saa7134/saa7134-dvb.c +++ b/drivers/media/video/saa7134/saa7134-dvb.c @@ -481,6 +481,17 @@ static struct tda1004x_config medion_cardbus = { .request_firmware = philips_tda1004x_request_firmware }; +static struct tda1004x_config technotrend_budget_t3000_config = { + .demod_address = 0x8, + .invert = 1, + .invert_oclk = 0, + .xtal_freq = TDA10046_XTAL_4M, + .agc_config = TDA10046_AGC_DEFAULT, + .if_freq = TDA10046_FREQ_3617, + .tuner_address = 0x63, + .request_firmware = philips_tda1004x_request_firmware +}; + /* ------------------------------------------------------------------ * tda 1004x based cards with philips silicon tuner */ @@ -1168,6 +1179,18 @@ static int dvb_init(struct saa7134_dev *dev) fe0->dvb.frontend->ops.tuner_ops.set_params = philips_td1316_tuner_set_params; } break; + case SAA7134_BOARD_TECHNOTREND_BUDGET_T3000: + fe0->dvb.frontend = dvb_attach(tda10046_attach, + &technotrend_budget_t3000_config, + &dev->i2c_adap); + if (fe0->dvb.frontend) { + dev->original_demod_sleep = fe0->dvb.frontend->ops.sleep; + fe0->dvb.frontend->ops.sleep = philips_europa_demod_sleep; + fe0->dvb.frontend->ops.tuner_ops.init = philips_europa_tuner_init; + fe0->dvb.frontend->ops.tuner_ops.sleep = philips_europa_tuner_sleep; + fe0->dvb.frontend->ops.tuner_ops.set_params = philips_td1316_tuner_set_params; + } + break; case SAA7134_BOARD_VIDEOMATE_DVBT_200: fe0->dvb.frontend = dvb_attach(tda10046_attach, &philips_tu1216_61_config, diff --git a/drivers/media/video/saa7134/saa7134.h b/drivers/media/video/saa7134/saa7134.h index 756a1ca8833..c040a180854 100644 --- a/drivers/media/video/saa7134/saa7134.h +++ b/drivers/media/video/saa7134/saa7134.h @@ -304,6 +304,7 @@ struct saa7134_format { #define SAA7134_BOARD_BEHOLD_H7 178 #define SAA7134_BOARD_BEHOLD_A7 179 #define SAA7134_BOARD_AVERMEDIA_M733A 180 +#define SAA7134_BOARD_TECHNOTREND_BUDGET_T3000 181 #define SAA7134_MAXBOARDS 32 #define SAA7134_INPUT_MAX 8 diff --git a/drivers/media/video/sh_mobile_ceu_camera.c b/drivers/media/video/sh_mobile_ceu_camera.c index 961bfa2fea9..2b24bd0de3a 100644 --- a/drivers/media/video/sh_mobile_ceu_camera.c +++ b/drivers/media/video/sh_mobile_ceu_camera.c @@ -633,6 +633,12 @@ static void sh_mobile_ceu_set_rect(struct soc_camera_device *icd) cdwdr_width *= 2; } + /* CSI2 special configuration */ + if (pcdev->pdata->csi2_dev) { + in_width = ((in_width - 2) * 2); + left_offset *= 2; + } + /* Set CAMOR, CAPWR, CFSZR, take care of CDWDR */ camor = left_offset | (top_offset << 16); @@ -743,16 +749,16 @@ static int sh_mobile_ceu_set_bus_param(struct soc_camera_device *icd, case V4L2_PIX_FMT_NV16: case V4L2_PIX_FMT_NV61: switch (cam->code) { - case V4L2_MBUS_FMT_YUYV8_2X8_BE: + case V4L2_MBUS_FMT_UYVY8_2X8: value = 0x00000000; /* Cb0, Y0, Cr0, Y1 */ break; - case V4L2_MBUS_FMT_YVYU8_2X8_BE: + case V4L2_MBUS_FMT_VYUY8_2X8: value = 0x00000100; /* Cr0, Y0, Cb0, Y1 */ break; - case V4L2_MBUS_FMT_YUYV8_2X8_LE: + case V4L2_MBUS_FMT_YUYV8_2X8: value = 0x00000200; /* Y0, Cb0, Y1, Cr0 */ break; - case V4L2_MBUS_FMT_YVYU8_2X8_LE: + case V4L2_MBUS_FMT_YVYU8_2X8: value = 0x00000300; /* Y0, Cr0, Y1, Cb0 */ break; default: @@ -767,6 +773,11 @@ static int sh_mobile_ceu_set_bus_param(struct soc_camera_device *icd, value |= common_flags & SOCAM_VSYNC_ACTIVE_LOW ? 1 << 1 : 0; value |= common_flags & SOCAM_HSYNC_ACTIVE_LOW ? 1 << 0 : 0; value |= pcdev->is_16bit ? 1 << 12 : 0; + + /* CSI2 mode */ + if (pcdev->pdata->csi2_dev) + value |= 3 << 12; + ceu_write(pcdev, CAMCR, value); ceu_write(pcdev, CAPCR, 0x00300000); @@ -883,6 +894,8 @@ static int sh_mobile_ceu_get_formats(struct soc_camera_device *icd, unsigned int { struct v4l2_subdev *sd = soc_camera_to_subdev(icd); struct device *dev = icd->dev.parent; + struct soc_camera_host *ici = to_soc_camera_host(dev); + struct sh_mobile_ceu_dev *pcdev = ici->priv; int ret, k, n; int formats = 0; struct sh_mobile_ceu_cam *cam; @@ -896,19 +909,19 @@ static int sh_mobile_ceu_get_formats(struct soc_camera_device *icd, unsigned int fmt = soc_mbus_get_fmtdesc(code); if (!fmt) { - dev_err(icd->dev.parent, - "Invalid format code #%u: %d\n", idx, code); + dev_err(dev, "Invalid format code #%u: %d\n", idx, code); return -EINVAL; } - ret = sh_mobile_ceu_try_bus_param(icd, fmt->bits_per_sample); - if (ret < 0) - return 0; + if (!pcdev->pdata->csi2_dev) { + ret = sh_mobile_ceu_try_bus_param(icd, fmt->bits_per_sample); + if (ret < 0) + return 0; + } if (!icd->host_priv) { struct v4l2_mbus_framefmt mf; struct v4l2_rect rect; - struct device *dev = icd->dev.parent; int shift = 0; /* FIXME: subwindow is lost between close / open */ @@ -927,7 +940,8 @@ static int sh_mobile_ceu_get_formats(struct soc_camera_device *icd, unsigned int /* Try 2560x1920, 1280x960, 640x480, 320x240 */ mf.width = 2560 >> shift; mf.height = 1920 >> shift; - ret = v4l2_subdev_call(sd, video, s_mbus_fmt, &mf); + ret = v4l2_device_call_until_err(sd->v4l2_dev, 0, video, + s_mbus_fmt, &mf); if (ret < 0) return ret; shift++; @@ -965,10 +979,10 @@ static int sh_mobile_ceu_get_formats(struct soc_camera_device *icd, unsigned int cam->extra_fmt = NULL; switch (code) { - case V4L2_MBUS_FMT_YUYV8_2X8_BE: - case V4L2_MBUS_FMT_YVYU8_2X8_BE: - case V4L2_MBUS_FMT_YUYV8_2X8_LE: - case V4L2_MBUS_FMT_YVYU8_2X8_LE: + case V4L2_MBUS_FMT_UYVY8_2X8: + case V4L2_MBUS_FMT_VYUY8_2X8: + case V4L2_MBUS_FMT_YUYV8_2X8: + case V4L2_MBUS_FMT_YVYU8_2X8: if (cam->extra_fmt) break; @@ -1005,7 +1019,7 @@ static int sh_mobile_ceu_get_formats(struct soc_camera_device *icd, unsigned int xlate->code = code; xlate++; dev_dbg(dev, "Providing format %s in pass-through mode\n", - xlate->host_fmt->name); + fmt->name); } return formats; @@ -1228,7 +1242,8 @@ static int client_s_fmt(struct soc_camera_device *icd, struct v4l2_cropcap cap; int ret; - ret = v4l2_subdev_call(sd, video, s_mbus_fmt, mf); + ret = v4l2_device_call_until_err(sd->v4l2_dev, 0, video, + s_mbus_fmt, mf); if (ret < 0) return ret; @@ -1257,7 +1272,8 @@ static int client_s_fmt(struct soc_camera_device *icd, tmp_h = min(2 * tmp_h, max_height); mf->width = tmp_w; mf->height = tmp_h; - ret = v4l2_subdev_call(sd, video, s_mbus_fmt, mf); + ret = v4l2_device_call_until_err(sd->v4l2_dev, 0, video, + s_mbus_fmt, mf); dev_geo(dev, "Camera scaled to %ux%u\n", mf->width, mf->height); if (ret < 0) { @@ -1514,7 +1530,8 @@ static int sh_mobile_ceu_set_fmt(struct soc_camera_device *icd, struct device *dev = icd->dev.parent; __u32 pixfmt = pix->pixelformat; const struct soc_camera_format_xlate *xlate; - unsigned int ceu_sub_width, ceu_sub_height; + /* Keep Compiler Happy */ + unsigned int ceu_sub_width = 0, ceu_sub_height = 0; u16 scale_v, scale_h; int ret; bool image_mode; @@ -1569,8 +1586,8 @@ static int sh_mobile_ceu_set_fmt(struct soc_camera_device *icd, /* Done with the camera. Now see if we can improve the result */ - dev_geo(dev, "Camera %d fmt %ux%u, requested %ux%u\n", - ret, mf.width, mf.height, pix->width, pix->height); + dev_geo(dev, "fmt %ux%u, requested %ux%u\n", + mf.width, mf.height, pix->width, pix->height); if (ret < 0) return ret; @@ -1634,6 +1651,9 @@ static int sh_mobile_ceu_try_fmt(struct soc_camera_device *icd, int width, height; int ret; + dev_geo(icd->dev.parent, "TRY_FMT(pix=0x%x, %ux%u)\n", + pixfmt, pix->width, pix->height); + xlate = soc_camera_xlate_by_fourcc(icd, pixfmt); if (!xlate) { dev_warn(icd->dev.parent, "Format %x not found\n", pixfmt); @@ -1660,7 +1680,7 @@ static int sh_mobile_ceu_try_fmt(struct soc_camera_device *icd, mf.code = xlate->code; mf.colorspace = pix->colorspace; - ret = v4l2_subdev_call(sd, video, try_mbus_fmt, &mf); + ret = v4l2_device_call_until_err(sd->v4l2_dev, 0, video, try_mbus_fmt, &mf); if (ret < 0) return ret; @@ -1684,7 +1704,8 @@ static int sh_mobile_ceu_try_fmt(struct soc_camera_device *icd, */ mf.width = 2560; mf.height = 1920; - ret = v4l2_subdev_call(sd, video, try_mbus_fmt, &mf); + ret = v4l2_device_call_until_err(sd->v4l2_dev, 0, video, + try_mbus_fmt, &mf); if (ret < 0) { /* Shouldn't actually happen... */ dev_err(icd->dev.parent, @@ -1699,6 +1720,9 @@ static int sh_mobile_ceu_try_fmt(struct soc_camera_device *icd, pix->height = height; } + dev_geo(icd->dev.parent, "%s(): return %d, fmt 0x%x, %ux%u\n", + __func__, ret, pix->pixelformat, pix->width, pix->height); + return ret; } @@ -1853,6 +1877,30 @@ static struct soc_camera_host_ops sh_mobile_ceu_host_ops = { .num_controls = ARRAY_SIZE(sh_mobile_ceu_controls), }; +struct bus_wait { + struct notifier_block notifier; + struct completion completion; + struct device *dev; +}; + +static int bus_notify(struct notifier_block *nb, + unsigned long action, void *data) +{ + struct device *dev = data; + struct bus_wait *wait = container_of(nb, struct bus_wait, notifier); + + if (wait->dev != dev) + return NOTIFY_DONE; + + switch (action) { + case BUS_NOTIFY_UNBOUND_DRIVER: + /* Protect from module unloading */ + wait_for_completion(&wait->completion); + return NOTIFY_OK; + } + return NOTIFY_DONE; +} + static int __devinit sh_mobile_ceu_probe(struct platform_device *pdev) { struct sh_mobile_ceu_dev *pcdev; @@ -1860,6 +1908,11 @@ static int __devinit sh_mobile_ceu_probe(struct platform_device *pdev) void __iomem *base; unsigned int irq; int err = 0; + struct bus_wait wait = { + .completion = COMPLETION_INITIALIZER_ONSTACK(wait.completion), + .notifier.notifier_call = bus_notify, + }; + struct device *csi2; res = platform_get_resource(pdev, IORESOURCE_MEM, 0); irq = platform_get_irq(pdev, 0); @@ -1931,12 +1984,54 @@ static int __devinit sh_mobile_ceu_probe(struct platform_device *pdev) pcdev->ici.drv_name = dev_name(&pdev->dev); pcdev->ici.ops = &sh_mobile_ceu_host_ops; + /* CSI2 interfacing */ + csi2 = pcdev->pdata->csi2_dev; + if (csi2) { + wait.dev = csi2; + + err = bus_register_notifier(&platform_bus_type, &wait.notifier); + if (err < 0) + goto exit_free_clk; + + /* + * From this point the driver module will not unload, until + * we complete the completion. + */ + + if (!csi2->driver || !csi2->driver->owner) { + complete(&wait.completion); + /* Either too late, or probing failed */ + bus_unregister_notifier(&platform_bus_type, &wait.notifier); + err = -ENXIO; + goto exit_free_clk; + } + + /* + * The module is still loaded, in the worst case it is hanging + * in device release on our completion. So, _now_ dereferencing + * the "owner" is safe! + */ + + err = try_module_get(csi2->driver->owner); + + /* Let notifier complete, if it has been locked */ + complete(&wait.completion); + bus_unregister_notifier(&platform_bus_type, &wait.notifier); + if (!err) { + err = -ENODEV; + goto exit_free_clk; + } + } + err = soc_camera_host_register(&pcdev->ici); if (err) - goto exit_free_clk; + goto exit_module_put; return 0; +exit_module_put: + if (csi2 && csi2->driver) + module_put(csi2->driver->owner); exit_free_clk: pm_runtime_disable(&pdev->dev); free_irq(pcdev->irq, pcdev); @@ -1956,6 +2051,7 @@ static int __devexit sh_mobile_ceu_remove(struct platform_device *pdev) struct soc_camera_host *soc_host = to_soc_camera_host(&pdev->dev); struct sh_mobile_ceu_dev *pcdev = container_of(soc_host, struct sh_mobile_ceu_dev, ici); + struct device *csi2 = pcdev->pdata->csi2_dev; soc_camera_host_unregister(soc_host); pm_runtime_disable(&pdev->dev); @@ -1963,7 +2059,10 @@ static int __devexit sh_mobile_ceu_remove(struct platform_device *pdev) if (platform_get_resource(pdev, IORESOURCE_MEM, 1)) dma_release_declared_memory(&pdev->dev); iounmap(pcdev->base); + if (csi2 && csi2->driver) + module_put(csi2->driver->owner); kfree(pcdev); + return 0; } @@ -1995,6 +2094,8 @@ static struct platform_driver sh_mobile_ceu_driver = { static int __init sh_mobile_ceu_init(void) { + /* Whatever return code */ + request_module("sh_mobile_csi2"); return platform_driver_register(&sh_mobile_ceu_driver); } diff --git a/drivers/media/video/sh_mobile_csi2.c b/drivers/media/video/sh_mobile_csi2.c new file mode 100644 index 00000000000..84a64681931 --- /dev/null +++ b/drivers/media/video/sh_mobile_csi2.c @@ -0,0 +1,354 @@ +/* + * Driver for the SH-Mobile MIPI CSI-2 unit + * + * Copyright (C) 2010, Guennadi Liakhovetski <g.liakhovetski@gmx.de> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/delay.h> +#include <linux/i2c.h> +#include <linux/io.h> +#include <linux/platform_device.h> +#include <linux/pm_runtime.h> +#include <linux/slab.h> +#include <linux/videodev2.h> + +#include <media/sh_mobile_csi2.h> +#include <media/soc_camera.h> +#include <media/v4l2-common.h> +#include <media/v4l2-dev.h> +#include <media/v4l2-device.h> +#include <media/v4l2-mediabus.h> +#include <media/v4l2-subdev.h> + +#define SH_CSI2_TREF 0x00 +#define SH_CSI2_SRST 0x04 +#define SH_CSI2_PHYCNT 0x08 +#define SH_CSI2_CHKSUM 0x0C +#define SH_CSI2_VCDT 0x10 + +struct sh_csi2 { + struct v4l2_subdev subdev; + struct list_head list; + struct notifier_block notifier; + unsigned int irq; + void __iomem *base; + struct platform_device *pdev; + struct sh_csi2_client_config *client; +}; + +static int sh_csi2_try_fmt(struct v4l2_subdev *sd, + struct v4l2_mbus_framefmt *mf) +{ + struct sh_csi2 *priv = container_of(sd, struct sh_csi2, subdev); + struct sh_csi2_pdata *pdata = priv->pdev->dev.platform_data; + + if (mf->width > 8188) + mf->width = 8188; + else if (mf->width & 1) + mf->width &= ~1; + + switch (pdata->type) { + case SH_CSI2C: + switch (mf->code) { + case V4L2_MBUS_FMT_UYVY8_2X8: /* YUV422 */ + case V4L2_MBUS_FMT_YUYV8_1_5X8: /* YUV420 */ + case V4L2_MBUS_FMT_GREY8_1X8: /* RAW8 */ + case V4L2_MBUS_FMT_SBGGR8_1X8: + case V4L2_MBUS_FMT_SGRBG8_1X8: + break; + default: + /* All MIPI CSI-2 devices must support one of primary formats */ + mf->code = V4L2_MBUS_FMT_YUYV8_2X8; + } + break; + case SH_CSI2I: + switch (mf->code) { + case V4L2_MBUS_FMT_GREY8_1X8: /* RAW8 */ + case V4L2_MBUS_FMT_SBGGR8_1X8: + case V4L2_MBUS_FMT_SGRBG8_1X8: + case V4L2_MBUS_FMT_SBGGR10_1X10: /* RAW10 */ + case V4L2_MBUS_FMT_SBGGR12_1X12: /* RAW12 */ + break; + default: + /* All MIPI CSI-2 devices must support one of primary formats */ + mf->code = V4L2_MBUS_FMT_SBGGR8_1X8; + } + break; + } + + return 0; +} + +/* + * We have done our best in try_fmt to try and tell the sensor, which formats + * we support. If now the configuration is unsuitable for us we can only + * error out. + */ +static int sh_csi2_s_fmt(struct v4l2_subdev *sd, + struct v4l2_mbus_framefmt *mf) +{ + struct sh_csi2 *priv = container_of(sd, struct sh_csi2, subdev); + u32 tmp = (priv->client->channel & 3) << 8; + + dev_dbg(sd->v4l2_dev->dev, "%s(%u)\n", __func__, mf->code); + if (mf->width > 8188 || mf->width & 1) + return -EINVAL; + + switch (mf->code) { + case V4L2_MBUS_FMT_UYVY8_2X8: + tmp |= 0x1e; /* YUV422 8 bit */ + break; + case V4L2_MBUS_FMT_YUYV8_1_5X8: + tmp |= 0x18; /* YUV420 8 bit */ + break; + case V4L2_MBUS_FMT_RGB555_2X8_PADHI_BE: + tmp |= 0x21; /* RGB555 */ + break; + case V4L2_MBUS_FMT_RGB565_2X8_BE: + tmp |= 0x22; /* RGB565 */ + break; + case V4L2_MBUS_FMT_GREY8_1X8: + case V4L2_MBUS_FMT_SBGGR8_1X8: + case V4L2_MBUS_FMT_SGRBG8_1X8: + tmp |= 0x2a; /* RAW8 */ + break; + default: + return -EINVAL; + } + + iowrite32(tmp, priv->base + SH_CSI2_VCDT); + + return 0; +} + +static struct v4l2_subdev_video_ops sh_csi2_subdev_video_ops = { + .s_mbus_fmt = sh_csi2_s_fmt, + .try_mbus_fmt = sh_csi2_try_fmt, +}; + +static struct v4l2_subdev_core_ops sh_csi2_subdev_core_ops; + +static struct v4l2_subdev_ops sh_csi2_subdev_ops = { + .core = &sh_csi2_subdev_core_ops, + .video = &sh_csi2_subdev_video_ops, +}; + +static void sh_csi2_hwinit(struct sh_csi2 *priv) +{ + struct sh_csi2_pdata *pdata = priv->pdev->dev.platform_data; + __u32 tmp = 0x10; /* Enable MIPI CSI clock lane */ + + /* Reflect registers immediately */ + iowrite32(0x00000001, priv->base + SH_CSI2_TREF); + /* reset CSI2 harware */ + iowrite32(0x00000001, priv->base + SH_CSI2_SRST); + udelay(5); + iowrite32(0x00000000, priv->base + SH_CSI2_SRST); + + if (priv->client->lanes & 3) + tmp |= priv->client->lanes & 3; + else + /* Default - both lanes */ + tmp |= 3; + + if (priv->client->phy == SH_CSI2_PHY_MAIN) + tmp |= 0x8000; + + iowrite32(tmp, priv->base + SH_CSI2_PHYCNT); + + tmp = 0; + if (pdata->flags & SH_CSI2_ECC) + tmp |= 2; + if (pdata->flags & SH_CSI2_CRC) + tmp |= 1; + iowrite32(tmp, priv->base + SH_CSI2_CHKSUM); +} + +static int sh_csi2_set_bus_param(struct soc_camera_device *icd, + unsigned long flags) +{ + return 0; +} + +static unsigned long sh_csi2_query_bus_param(struct soc_camera_device *icd) +{ + struct soc_camera_link *icl = to_soc_camera_link(icd); + const unsigned long flags = SOCAM_PCLK_SAMPLE_RISING | + SOCAM_HSYNC_ACTIVE_HIGH | SOCAM_VSYNC_ACTIVE_HIGH | + SOCAM_MASTER | SOCAM_DATAWIDTH_8 | SOCAM_DATA_ACTIVE_HIGH; + + return soc_camera_apply_sensor_flags(icl, flags); +} + +static int sh_csi2_notify(struct notifier_block *nb, + unsigned long action, void *data) +{ + struct device *dev = data; + struct soc_camera_device *icd = to_soc_camera_dev(dev); + struct v4l2_device *v4l2_dev = dev_get_drvdata(dev->parent); + struct sh_csi2 *priv = + container_of(nb, struct sh_csi2, notifier); + struct sh_csi2_pdata *pdata = priv->pdev->dev.platform_data; + int ret, i; + + for (i = 0; i < pdata->num_clients; i++) + if (&pdata->clients[i].pdev->dev == icd->pdev) + break; + + dev_dbg(dev, "%s(%p): action = %lu, found #%d\n", __func__, dev, action, i); + + if (i == pdata->num_clients) + return NOTIFY_DONE; + + switch (action) { + case BUS_NOTIFY_BOUND_DRIVER: + snprintf(priv->subdev.name, V4L2_SUBDEV_NAME_SIZE, "%s%s", + dev_name(v4l2_dev->dev), ".mipi-csi"); + ret = v4l2_device_register_subdev(v4l2_dev, &priv->subdev); + dev_dbg(dev, "%s(%p): ret(register_subdev) = %d\n", __func__, priv, ret); + if (ret < 0) + return NOTIFY_DONE; + + priv->client = pdata->clients + i; + + icd->ops->set_bus_param = sh_csi2_set_bus_param; + icd->ops->query_bus_param = sh_csi2_query_bus_param; + + pm_runtime_get_sync(v4l2_get_subdevdata(&priv->subdev)); + + sh_csi2_hwinit(priv); + break; + case BUS_NOTIFY_UNBIND_DRIVER: + priv->client = NULL; + + /* Driver is about to be unbound */ + icd->ops->set_bus_param = NULL; + icd->ops->query_bus_param = NULL; + + v4l2_device_unregister_subdev(&priv->subdev); + + pm_runtime_put(v4l2_get_subdevdata(&priv->subdev)); + break; + } + + return NOTIFY_OK; +} + +static __devinit int sh_csi2_probe(struct platform_device *pdev) +{ + struct resource *res; + unsigned int irq; + int ret; + struct sh_csi2 *priv; + /* Platform data specify the PHY, lanes, ECC, CRC */ + struct sh_csi2_pdata *pdata = pdev->dev.platform_data; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + /* Interrupt unused so far */ + irq = platform_get_irq(pdev, 0); + + if (!res || (int)irq <= 0 || !pdata) { + dev_err(&pdev->dev, "Not enough CSI2 platform resources.\n"); + return -ENODEV; + } + + /* TODO: Add support for CSI2I. Careful: different register layout! */ + if (pdata->type != SH_CSI2C) { + dev_err(&pdev->dev, "Only CSI2C supported ATM.\n"); + return -EINVAL; + } + + priv = kzalloc(sizeof(struct sh_csi2), GFP_KERNEL); + if (!priv) + return -ENOMEM; + + priv->irq = irq; + priv->notifier.notifier_call = sh_csi2_notify; + + /* We MUST attach after the MIPI sensor */ + ret = bus_register_notifier(&soc_camera_bus_type, &priv->notifier); + if (ret < 0) { + dev_err(&pdev->dev, "CSI2 cannot register notifier\n"); + goto ernotify; + } + + if (!request_mem_region(res->start, resource_size(res), pdev->name)) { + dev_err(&pdev->dev, "CSI2 register region already claimed\n"); + ret = -EBUSY; + goto ereqreg; + } + + priv->base = ioremap(res->start, resource_size(res)); + if (!priv->base) { + ret = -ENXIO; + dev_err(&pdev->dev, "Unable to ioremap CSI2 registers.\n"); + goto eremap; + } + + priv->pdev = pdev; + + v4l2_subdev_init(&priv->subdev, &sh_csi2_subdev_ops); + v4l2_set_subdevdata(&priv->subdev, &pdev->dev); + + platform_set_drvdata(pdev, priv); + + pm_runtime_enable(&pdev->dev); + + dev_dbg(&pdev->dev, "CSI2 probed.\n"); + + return 0; + +eremap: + release_mem_region(res->start, resource_size(res)); +ereqreg: + bus_unregister_notifier(&soc_camera_bus_type, &priv->notifier); +ernotify: + kfree(priv); + + return ret; +} + +static __devexit int sh_csi2_remove(struct platform_device *pdev) +{ + struct sh_csi2 *priv = platform_get_drvdata(pdev); + struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + + bus_unregister_notifier(&soc_camera_bus_type, &priv->notifier); + pm_runtime_disable(&pdev->dev); + iounmap(priv->base); + release_mem_region(res->start, resource_size(res)); + platform_set_drvdata(pdev, NULL); + kfree(priv); + + return 0; +} + +static struct platform_driver __refdata sh_csi2_pdrv = { + .remove = __devexit_p(sh_csi2_remove), + .driver = { + .name = "sh-mobile-csi2", + .owner = THIS_MODULE, + }, +}; + +static int __init sh_csi2_init(void) +{ + return platform_driver_probe(&sh_csi2_pdrv, sh_csi2_probe); +} + +static void __exit sh_csi2_exit(void) +{ + platform_driver_unregister(&sh_csi2_pdrv); +} + +module_init(sh_csi2_init); +module_exit(sh_csi2_exit); + +MODULE_DESCRIPTION("SH-Mobile MIPI CSI-2 driver"); +MODULE_AUTHOR("Guennadi Liakhovetski <g.liakhovetski@gmx.de>"); +MODULE_LICENSE("GPL v2"); +MODULE_ALIAS("platform:sh-mobile-csi2"); diff --git a/drivers/media/video/sh_vou.c b/drivers/media/video/sh_vou.c index f5b892a2a8e..d394187eb70 100644 --- a/drivers/media/video/sh_vou.c +++ b/drivers/media/video/sh_vou.c @@ -18,6 +18,7 @@ #include <linux/kernel.h> #include <linux/platform_device.h> #include <linux/pm_runtime.h> +#include <linux/slab.h> #include <linux/version.h> #include <linux/videodev2.h> @@ -57,7 +58,7 @@ enum sh_vou_status { }; #define VOU_MAX_IMAGE_WIDTH 720 -#define VOU_MAX_IMAGE_HEIGHT 480 +#define VOU_MAX_IMAGE_HEIGHT 576 struct sh_vou_device { struct v4l2_device v4l2_dev; @@ -527,20 +528,17 @@ struct sh_vou_geometry { static void vou_adjust_input(struct sh_vou_geometry *geo, v4l2_std_id std) { /* The compiler cannot know, that best and idx will indeed be set */ - unsigned int best_err = UINT_MAX, best = 0, width_max, height_max; + unsigned int best_err = UINT_MAX, best = 0, img_height_max; int i, idx = 0; - if (std & V4L2_STD_525_60) { - width_max = 858; - height_max = 262; - } else { - width_max = 864; - height_max = 312; - } + if (std & V4L2_STD_525_60) + img_height_max = 480; + else + img_height_max = 576; /* Image width must be a multiple of 4 */ v4l_bound_align_image(&geo->in_width, 0, VOU_MAX_IMAGE_WIDTH, 2, - &geo->in_height, 0, VOU_MAX_IMAGE_HEIGHT, 1, 0); + &geo->in_height, 0, img_height_max, 1, 0); /* Select scales to come as close as possible to the output image */ for (i = ARRAY_SIZE(vou_scale_h_num) - 1; i >= 0; i--) { @@ -573,7 +571,7 @@ static void vou_adjust_input(struct sh_vou_geometry *geo, v4l2_std_id std) unsigned int found = geo->output.height * vou_scale_v_den[i] / vou_scale_v_num[i]; - if (found > VOU_MAX_IMAGE_HEIGHT) + if (found > img_height_max) /* scales increase */ break; @@ -597,15 +595,18 @@ static void vou_adjust_input(struct sh_vou_geometry *geo, v4l2_std_id std) */ static void vou_adjust_output(struct sh_vou_geometry *geo, v4l2_std_id std) { - unsigned int best_err = UINT_MAX, best, width_max, height_max; + unsigned int best_err = UINT_MAX, best, width_max, height_max, + img_height_max; int i, idx; if (std & V4L2_STD_525_60) { width_max = 858; height_max = 262 * 2; + img_height_max = 480; } else { width_max = 864; height_max = 312 * 2; + img_height_max = 576; } /* Select scales to come as close as possible to the output image */ @@ -644,7 +645,7 @@ static void vou_adjust_output(struct sh_vou_geometry *geo, v4l2_std_id std) unsigned int found = geo->in_height * vou_scale_v_num[i] / vou_scale_v_den[i]; - if (found > VOU_MAX_IMAGE_HEIGHT) + if (found > img_height_max) /* scales increase */ break; @@ -673,11 +674,12 @@ static int sh_vou_s_fmt_vid_out(struct file *file, void *priv, struct video_device *vdev = video_devdata(file); struct sh_vou_device *vou_dev = video_get_drvdata(vdev); struct v4l2_pix_format *pix = &fmt->fmt.pix; + unsigned int img_height_max; int pix_idx; struct sh_vou_geometry geo; struct v4l2_mbus_framefmt mbfmt = { /* Revisit: is this the correct code? */ - .code = V4L2_MBUS_FMT_YUYV8_2X8_LE, + .code = V4L2_MBUS_FMT_YUYV8_2X8, .field = V4L2_FIELD_INTERLACED, .colorspace = V4L2_COLORSPACE_SMPTE170M, }; @@ -701,9 +703,14 @@ static int sh_vou_s_fmt_vid_out(struct file *file, void *priv, if (pix_idx == ARRAY_SIZE(vou_fmt)) return -EINVAL; + if (vou_dev->std & V4L2_STD_525_60) + img_height_max = 480; + else + img_height_max = 576; + /* Image width must be a multiple of 4 */ v4l_bound_align_image(&pix->width, 0, VOU_MAX_IMAGE_WIDTH, 2, - &pix->height, 0, VOU_MAX_IMAGE_HEIGHT, 1, 0); + &pix->height, 0, img_height_max, 1, 0); geo.in_width = pix->width; geo.in_height = pix->height; @@ -724,8 +731,8 @@ static int sh_vou_s_fmt_vid_out(struct file *file, void *priv, /* Sanity checks */ if ((unsigned)mbfmt.width > VOU_MAX_IMAGE_WIDTH || - (unsigned)mbfmt.height > VOU_MAX_IMAGE_HEIGHT || - mbfmt.code != V4L2_MBUS_FMT_YUYV8_2X8_LE) + (unsigned)mbfmt.height > img_height_max || + mbfmt.code != V4L2_MBUS_FMT_YUYV8_2X8) return -EIO; if (mbfmt.width != geo.output.width || @@ -936,10 +943,11 @@ static int sh_vou_s_crop(struct file *file, void *fh, struct v4l2_crop *a) struct sh_vou_geometry geo; struct v4l2_mbus_framefmt mbfmt = { /* Revisit: is this the correct code? */ - .code = V4L2_MBUS_FMT_YUYV8_2X8_LE, + .code = V4L2_MBUS_FMT_YUYV8_2X8, .field = V4L2_FIELD_INTERLACED, .colorspace = V4L2_COLORSPACE_SMPTE170M, }; + unsigned int img_height_max; int ret; dev_dbg(vou_dev->v4l2_dev.dev, "%s(): %ux%u@%u:%u\n", __func__, @@ -948,14 +956,19 @@ static int sh_vou_s_crop(struct file *file, void *fh, struct v4l2_crop *a) if (a->type != V4L2_BUF_TYPE_VIDEO_OUTPUT) return -EINVAL; + if (vou_dev->std & V4L2_STD_525_60) + img_height_max = 480; + else + img_height_max = 576; + v4l_bound_align_image(&rect->width, 0, VOU_MAX_IMAGE_WIDTH, 1, - &rect->height, 0, VOU_MAX_IMAGE_HEIGHT, 1, 0); + &rect->height, 0, img_height_max, 1, 0); if (rect->width + rect->left > VOU_MAX_IMAGE_WIDTH) rect->left = VOU_MAX_IMAGE_WIDTH - rect->width; - if (rect->height + rect->top > VOU_MAX_IMAGE_HEIGHT) - rect->top = VOU_MAX_IMAGE_HEIGHT - rect->height; + if (rect->height + rect->top > img_height_max) + rect->top = img_height_max - rect->height; geo.output = *rect; geo.in_width = pix->width; @@ -980,8 +993,8 @@ static int sh_vou_s_crop(struct file *file, void *fh, struct v4l2_crop *a) /* Sanity checks */ if ((unsigned)mbfmt.width > VOU_MAX_IMAGE_WIDTH || - (unsigned)mbfmt.height > VOU_MAX_IMAGE_HEIGHT || - mbfmt.code != V4L2_MBUS_FMT_YUYV8_2X8_LE) + (unsigned)mbfmt.height > img_height_max || + mbfmt.code != V4L2_MBUS_FMT_YUYV8_2X8) return -EIO; geo.output.width = mbfmt.width; @@ -1329,13 +1342,13 @@ static int __devinit sh_vou_probe(struct platform_device *pdev) rect->left = 0; rect->top = 0; rect->width = VOU_MAX_IMAGE_WIDTH; - rect->height = VOU_MAX_IMAGE_HEIGHT; + rect->height = 480; pix->width = VOU_MAX_IMAGE_WIDTH; - pix->height = VOU_MAX_IMAGE_HEIGHT; + pix->height = 480; pix->pixelformat = V4L2_PIX_FMT_YVYU; pix->field = V4L2_FIELD_NONE; pix->bytesperline = VOU_MAX_IMAGE_WIDTH * 2; - pix->sizeimage = VOU_MAX_IMAGE_WIDTH * 2 * VOU_MAX_IMAGE_HEIGHT; + pix->sizeimage = VOU_MAX_IMAGE_WIDTH * 2 * 480; pix->colorspace = V4L2_COLORSPACE_SMPTE170M; region = request_mem_region(reg_res->start, resource_size(reg_res), diff --git a/drivers/media/video/soc_camera.c b/drivers/media/video/soc_camera.c index 475757bfd7b..f2032939fd4 100644 --- a/drivers/media/video/soc_camera.c +++ b/drivers/media/video/soc_camera.c @@ -1107,13 +1107,14 @@ static int soc_camera_resume(struct device *dev) return ret; } -static struct bus_type soc_camera_bus_type = { +struct bus_type soc_camera_bus_type = { .name = "soc-camera", .probe = soc_camera_probe, .remove = soc_camera_remove, .suspend = soc_camera_suspend, .resume = soc_camera_resume, }; +EXPORT_SYMBOL_GPL(soc_camera_bus_type); static struct device_driver ic_drv = { .name = "camera", diff --git a/drivers/media/video/soc_camera_platform.c b/drivers/media/video/soc_camera_platform.c index 248c986f098..bf406e89c99 100644 --- a/drivers/media/video/soc_camera_platform.c +++ b/drivers/media/video/soc_camera_platform.c @@ -56,8 +56,8 @@ soc_camera_platform_query_bus_param(struct soc_camera_device *icd) return p->bus_param; } -static int soc_camera_platform_try_fmt(struct v4l2_subdev *sd, - struct v4l2_mbus_framefmt *mf) +static int soc_camera_platform_fill_fmt(struct v4l2_subdev *sd, + struct v4l2_mbus_framefmt *mf) { struct soc_camera_platform_info *p = v4l2_get_subdevdata(sd); @@ -65,6 +65,7 @@ static int soc_camera_platform_try_fmt(struct v4l2_subdev *sd, mf->height = p->format.height; mf->code = p->format.code; mf->colorspace = p->format.colorspace; + mf->field = p->format.field; return 0; } @@ -83,10 +84,45 @@ static int soc_camera_platform_enum_fmt(struct v4l2_subdev *sd, unsigned int ind return 0; } +static int soc_camera_platform_g_crop(struct v4l2_subdev *sd, + struct v4l2_crop *a) +{ + struct soc_camera_platform_info *p = v4l2_get_subdevdata(sd); + + a->c.left = 0; + a->c.top = 0; + a->c.width = p->format.width; + a->c.height = p->format.height; + a->type = V4L2_BUF_TYPE_VIDEO_CAPTURE; + + return 0; +} + +static int soc_camera_platform_cropcap(struct v4l2_subdev *sd, + struct v4l2_cropcap *a) +{ + struct soc_camera_platform_info *p = v4l2_get_subdevdata(sd); + + a->bounds.left = 0; + a->bounds.top = 0; + a->bounds.width = p->format.width; + a->bounds.height = p->format.height; + a->defrect = a->bounds; + a->type = V4L2_BUF_TYPE_VIDEO_CAPTURE; + a->pixelaspect.numerator = 1; + a->pixelaspect.denominator = 1; + + return 0; +} + static struct v4l2_subdev_video_ops platform_subdev_video_ops = { .s_stream = soc_camera_platform_s_stream, - .try_mbus_fmt = soc_camera_platform_try_fmt, .enum_mbus_fmt = soc_camera_platform_enum_fmt, + .cropcap = soc_camera_platform_cropcap, + .g_crop = soc_camera_platform_g_crop, + .try_mbus_fmt = soc_camera_platform_fill_fmt, + .g_mbus_fmt = soc_camera_platform_fill_fmt, + .s_mbus_fmt = soc_camera_platform_fill_fmt, }; static struct v4l2_subdev_ops platform_subdev_ops = { diff --git a/drivers/media/video/soc_mediabus.c b/drivers/media/video/soc_mediabus.c index 8b63b6545e7..91391214c68 100644 --- a/drivers/media/video/soc_mediabus.c +++ b/drivers/media/video/soc_mediabus.c @@ -18,28 +18,28 @@ #define MBUS_IDX(f) (V4L2_MBUS_FMT_ ## f - V4L2_MBUS_FMT_FIXED - 1) static const struct soc_mbus_pixelfmt mbus_fmt[] = { - [MBUS_IDX(YUYV8_2X8_LE)] = { + [MBUS_IDX(YUYV8_2X8)] = { .fourcc = V4L2_PIX_FMT_YUYV, .name = "YUYV", .bits_per_sample = 8, .packing = SOC_MBUS_PACKING_2X8_PADHI, .order = SOC_MBUS_ORDER_LE, }, - [MBUS_IDX(YVYU8_2X8_LE)] = { + [MBUS_IDX(YVYU8_2X8)] = { .fourcc = V4L2_PIX_FMT_YVYU, .name = "YVYU", .bits_per_sample = 8, .packing = SOC_MBUS_PACKING_2X8_PADHI, .order = SOC_MBUS_ORDER_LE, }, - [MBUS_IDX(YUYV8_2X8_BE)] = { + [MBUS_IDX(UYVY8_2X8)] = { .fourcc = V4L2_PIX_FMT_UYVY, .name = "UYVY", .bits_per_sample = 8, .packing = SOC_MBUS_PACKING_2X8_PADHI, .order = SOC_MBUS_ORDER_LE, }, - [MBUS_IDX(YVYU8_2X8_BE)] = { + [MBUS_IDX(VYUY8_2X8)] = { .fourcc = V4L2_PIX_FMT_VYUY, .name = "VYUY", .bits_per_sample = 8, diff --git a/drivers/media/video/stv680.c b/drivers/media/video/stv680.c deleted file mode 100644 index 5938ad8702e..00000000000 --- a/drivers/media/video/stv680.c +++ /dev/null @@ -1,1565 +0,0 @@ -/* - * STV0680 USB Camera Driver, by Kevin Sisson (kjsisson@bellsouth.net) - * - * Thanks to STMicroelectronics for information on the usb commands, and - * to Steve Miller at STM for his help and encouragement while I was - * writing this driver. - * - * This driver is based heavily on the - * Endpoints (formerly known as AOX) se401 USB Camera Driver - * Copyright (c) 2000 Jeroen B. Vreeken (pe1rxq@amsat.org) - * - * Still somewhat based on the Linux ov511 driver. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY - * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License - * for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software Foundation, - * Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - * - * History: - * ver 0.1 October, 2001. Initial attempt. - * - * ver 0.2 November, 2001. Fixed asbility to resize, added brightness - * function, made more stable (?) - * - * ver 0.21 Nov, 2001. Added gamma correction and white balance, - * due to Alexander Schwartz. Still trying to - * improve stablility. Moved stuff into stv680.h - * - * ver 0.22 Nov, 2001. Added sharpen function (by Michael Sweet, - * mike@easysw.com) from GIMP, also used in pencam. - * Simple, fast, good integer math routine. - * - * ver 0.23 Dec, 2001 (gkh) - * Took out sharpen function, ran code through - * Lindent, and did other minor tweaks to get - * things to work properly with 2.5.1 - * - * ver 0.24 Jan, 2002 (kjs) - * Fixed the problem with webcam crashing after - * two pictures. Changed the way pic is halved to - * improve quality. Got rid of green line around - * frame. Fix brightness reset when changing size - * bug. Adjusted gamma filters slightly. - * - * ver 0.25 Jan, 2002 (kjs) - * Fixed a bug in which the driver sometimes attempted - * to set to a non-supported size. This allowed - * gnomemeeting to work. - * Fixed proc entry removal bug. - */ - -#include <linux/module.h> -#include <linux/init.h> -#include <linux/vmalloc.h> -#include <linux/slab.h> -#include <linux/smp_lock.h> -#include <linux/pagemap.h> -#include <linux/errno.h> -#include <linux/videodev.h> -#include <media/v4l2-common.h> -#include <media/v4l2-ioctl.h> -#include <linux/usb.h> -#include <linux/mutex.h> - -#include "stv680.h" - -static int video_nr = -1; - -static int swapRGB; /* 0 = default for auto select */ - -/* 0 = default to allow auto select; -1 = swap never, +1 = swap always */ -static int swapRGB_on; - -static unsigned int debug; - -#define PDEBUG(level, fmt, args...) \ - do { \ - if (debug >= level) \ - printk(KERN_INFO KBUILD_MODNAME " [%s:%d] \n" fmt, \ - __func__, __LINE__ , ## args); \ - } while (0) - - -/* - * Version Information - */ -#define DRIVER_VERSION "v0.25" -#define DRIVER_AUTHOR "Kevin Sisson <kjsisson@bellsouth.net>" -#define DRIVER_DESC "STV0680 USB Camera Driver" - -MODULE_AUTHOR (DRIVER_AUTHOR); -MODULE_DESCRIPTION (DRIVER_DESC); -MODULE_LICENSE ("GPL"); -module_param(debug, int, S_IRUGO | S_IWUSR); -MODULE_PARM_DESC (debug, "Debug enabled or not"); -module_param(swapRGB_on, int, 0); -MODULE_PARM_DESC (swapRGB_on, "Red/blue swap: 1=always, 0=auto, -1=never"); -module_param(video_nr, int, 0); - -/******************************************************************** - * - * Memory management - * - * This is a shameless copy from the USB-cpia driver (linux kernel - * version 2.3.29 or so, I have no idea what this code actually does ;). - * Actually it seems to be a copy of a shameless copy of the bttv-driver. - * Or that is a copy of a shameless copy of ... (To the powers: is there - * no generic kernel-function to do this sort of stuff?) - * - * Yes, it was a shameless copy from the bttv-driver. IIRC, Alan says - * there will be one, but apparentely not yet -jerdfelt - * - * So I copied it again for the ov511 driver -claudio - * - * Same for the se401 driver -Jeroen - * - * And the STV0680 driver - Kevin - ********************************************************************/ -static void *rvmalloc (unsigned long size) -{ - void *mem; - unsigned long adr; - - size = PAGE_ALIGN(size); - mem = vmalloc_32 (size); - if (!mem) - return NULL; - - memset (mem, 0, size); /* Clear the ram out, no junk to the user */ - adr = (unsigned long) mem; - while (size > 0) { - SetPageReserved(vmalloc_to_page((void *)adr)); - adr += PAGE_SIZE; - size -= PAGE_SIZE; - } - return mem; -} - -static void rvfree (void *mem, unsigned long size) -{ - unsigned long adr; - - if (!mem) - return; - - adr = (unsigned long) mem; - while ((long) size > 0) { - ClearPageReserved(vmalloc_to_page((void *)adr)); - adr += PAGE_SIZE; - size -= PAGE_SIZE; - } - vfree (mem); -} - - -/********************************************************************* - * pencam read/write functions - ********************************************************************/ - -static int stv_sndctrl (int set, struct usb_stv *stv680, unsigned short req, unsigned short value, unsigned char *buffer, int size) -{ - int ret = -1; - - switch (set) { - case 0: /* 0xc1 */ - ret = usb_control_msg (stv680->udev, - usb_rcvctrlpipe (stv680->udev, 0), - req, - (USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_ENDPOINT), - value, 0, buffer, size, PENCAM_TIMEOUT); - break; - - case 1: /* 0x41 */ - ret = usb_control_msg (stv680->udev, - usb_sndctrlpipe (stv680->udev, 0), - req, - (USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_ENDPOINT), - value, 0, buffer, size, PENCAM_TIMEOUT); - break; - - case 2: /* 0x80 */ - ret = usb_control_msg (stv680->udev, - usb_rcvctrlpipe (stv680->udev, 0), - req, - (USB_DIR_IN | USB_RECIP_DEVICE), - value, 0, buffer, size, PENCAM_TIMEOUT); - break; - - case 3: /* 0x40 */ - ret = usb_control_msg (stv680->udev, - usb_sndctrlpipe (stv680->udev, 0), - req, - (USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE), - value, 0, buffer, size, PENCAM_TIMEOUT); - break; - - } - if ((ret < 0) && (req != 0x0a)) { - PDEBUG (1, "STV(e): usb_control_msg error %i, request = 0x%x, error = %i", set, req, ret); - } - return ret; -} - -static int stv_set_config (struct usb_stv *dev, int configuration, int interface, int alternate) -{ - - if (configuration != dev->udev->actconfig->desc.bConfigurationValue - || usb_reset_configuration (dev->udev) < 0) { - PDEBUG (1, "STV(e): FAILED to reset configuration %i", configuration); - return -1; - } - if (usb_set_interface (dev->udev, interface, alternate) < 0) { - PDEBUG (1, "STV(e): FAILED to set alternate interface %i", alternate); - return -1; - } - return 0; -} - -static int stv_stop_video (struct usb_stv *dev) -{ - int i; - unsigned char *buf; - - buf = kmalloc (40, GFP_KERNEL); - if (buf == NULL) { - PDEBUG (0, "STV(e): Out of (small buf) memory"); - return -1; - } - - /* this is a high priority command; it stops all lower order commands */ - if ((i = stv_sndctrl (1, dev, 0x04, 0x0000, buf, 0x0)) < 0) { - i = stv_sndctrl (0, dev, 0x80, 0, buf, 0x02); /* Get Last Error; 2 = busy */ - PDEBUG (1, "STV(i): last error: %i, command = 0x%x", buf[0], buf[1]); - } else { - PDEBUG (1, "STV(i): Camera reset to idle mode."); - } - - if ((i = stv_set_config (dev, 1, 0, 0)) < 0) - PDEBUG (1, "STV(e): Reset config during exit failed"); - - /* get current mode */ - buf[0] = 0xf0; - if ((i = stv_sndctrl (0, dev, 0x87, 0, buf, 0x08)) != 0x08) /* get mode */ - PDEBUG (0, "STV(e): Stop_video: problem setting original mode"); - if (dev->origMode != buf[0]) { - memset (buf, 0, 8); - buf[0] = (unsigned char) dev->origMode; - if ((i = stv_sndctrl (3, dev, 0x07, 0x0100, buf, 0x08)) != 0x08) { - PDEBUG (0, "STV(e): Stop_video: Set_Camera_Mode failed"); - i = -1; - } - buf[0] = 0xf0; - i = stv_sndctrl (0, dev, 0x87, 0, buf, 0x08); - if ((i != 0x08) || (buf[0] != dev->origMode)) { - PDEBUG (0, "STV(e): camera NOT set to original resolution."); - i = -1; - } else - PDEBUG (0, "STV(i): Camera set to original resolution"); - } - /* origMode */ - kfree(buf); - return i; -} - -static int stv_set_video_mode (struct usb_stv *dev) -{ - int i, stop_video = 1; - unsigned char *buf; - - buf = kmalloc (40, GFP_KERNEL); - if (buf == NULL) { - PDEBUG (0, "STV(e): Out of (small buf) memory"); - return -1; - } - - if ((i = stv_set_config (dev, 1, 0, 0)) < 0) { - kfree(buf); - return i; - } - - i = stv_sndctrl (2, dev, 0x06, 0x0100, buf, 0x12); - if (!(i > 0) && (buf[8] == 0x53) && (buf[9] == 0x05)) { - PDEBUG (1, "STV(e): Could not get descriptor 0100."); - goto error; - } - - /* set alternate interface 1 */ - if ((i = stv_set_config (dev, 1, 0, 1)) < 0) - goto error; - - if ((i = stv_sndctrl (0, dev, 0x85, 0, buf, 0x10)) != 0x10) - goto error; - PDEBUG (1, "STV(i): Setting video mode."); - /* Switch to Video mode: 0x0100 = VGA (640x480), 0x0000 = CIF (352x288) 0x0300 = QVGA (320x240) */ - if ((i = stv_sndctrl (1, dev, 0x09, dev->VideoMode, buf, 0x0)) < 0) { - stop_video = 0; - goto error; - } - goto exit; - -error: - kfree(buf); - if (stop_video == 1) - stv_stop_video (dev); - return -1; - -exit: - kfree(buf); - return 0; -} - -static int stv_init (struct usb_stv *stv680) -{ - int i = 0; - unsigned char *buffer; - unsigned long int bufsize; - - buffer = kzalloc (40, GFP_KERNEL); - if (buffer == NULL) { - PDEBUG (0, "STV(e): Out of (small buf) memory"); - return -1; - } - udelay (100); - - /* set config 1, interface 0, alternate 0 */ - if ((i = stv_set_config (stv680, 1, 0, 0)) < 0) { - kfree(buffer); - PDEBUG (0, "STV(e): set config 1,0,0 failed"); - return -1; - } - /* ping camera to be sure STV0680 is present */ - if ((i = stv_sndctrl (0, stv680, 0x88, 0x5678, buffer, 0x02)) != 0x02) - goto error; - if ((buffer[0] != 0x56) || (buffer[1] != 0x78)) { - PDEBUG (1, "STV(e): camera ping failed!!"); - goto error; - } - - /* get camera descriptor */ - if ((i = stv_sndctrl (2, stv680, 0x06, 0x0200, buffer, 0x09)) != 0x09) - goto error; - i = stv_sndctrl (2, stv680, 0x06, 0x0200, buffer, 0x22); - if (!(i >= 0) && (buffer[7] == 0xa0) && (buffer[8] == 0x23)) { - PDEBUG (1, "STV(e): Could not get descriptor 0200."); - goto error; - } - if ((i = stv_sndctrl (0, stv680, 0x8a, 0, buffer, 0x02)) != 0x02) - goto error; - if ((i = stv_sndctrl (0, stv680, 0x8b, 0, buffer, 0x24)) != 0x24) - goto error; - if ((i = stv_sndctrl (0, stv680, 0x85, 0, buffer, 0x10)) != 0x10) - goto error; - - stv680->SupportedModes = buffer[7]; - i = stv680->SupportedModes; - stv680->CIF = 0; - stv680->VGA = 0; - stv680->QVGA = 0; - if (i & 1) - stv680->CIF = 1; - if (i & 2) - stv680->VGA = 1; - if (i & 8) - stv680->QVGA = 1; - if (stv680->SupportedModes == 0) { - PDEBUG (0, "STV(e): There are NO supported STV680 modes!!"); - i = -1; - goto error; - } else { - if (stv680->CIF) - PDEBUG (0, "STV(i): CIF is supported"); - if (stv680->QVGA) - PDEBUG (0, "STV(i): QVGA is supported"); - } - /* FW rev, ASIC rev, sensor ID */ - PDEBUG (1, "STV(i): Firmware rev is %i.%i", buffer[0], buffer[1]); - PDEBUG (1, "STV(i): ASIC rev is %i.%i", buffer[2], buffer[3]); - PDEBUG (1, "STV(i): Sensor ID is %i", (buffer[4]*16) + (buffer[5]>>4)); - - /* set alternate interface 1 */ - if ((i = stv_set_config (stv680, 1, 0, 1)) < 0) - goto error; - - if ((i = stv_sndctrl (0, stv680, 0x85, 0, buffer, 0x10)) != 0x10) - goto error; - if ((i = stv_sndctrl (0, stv680, 0x8d, 0, buffer, 0x08)) != 0x08) - goto error; - i = buffer[3]; - PDEBUG (0, "STV(i): Camera has %i pictures.", i); - - /* get current mode */ - if ((i = stv_sndctrl (0, stv680, 0x87, 0, buffer, 0x08)) != 0x08) - goto error; - stv680->origMode = buffer[0]; /* 01 = VGA, 03 = QVGA, 00 = CIF */ - - /* This will attemp CIF mode, if supported. If not, set to QVGA */ - memset (buffer, 0, 8); - if (stv680->CIF) - buffer[0] = 0x00; - else if (stv680->QVGA) - buffer[0] = 0x03; - if ((i = stv_sndctrl (3, stv680, 0x07, 0x0100, buffer, 0x08)) != 0x08) { - PDEBUG (0, "STV(i): Set_Camera_Mode failed"); - i = -1; - goto error; - } - buffer[0] = 0xf0; - stv_sndctrl (0, stv680, 0x87, 0, buffer, 0x08); - if (((stv680->CIF == 1) && (buffer[0] != 0x00)) || ((stv680->QVGA == 1) && (buffer[0] != 0x03))) { - PDEBUG (0, "STV(e): Error setting camera video mode!"); - i = -1; - goto error; - } else { - if (buffer[0] == 0) { - stv680->VideoMode = 0x0000; - PDEBUG (0, "STV(i): Video Mode set to CIF"); - } - if (buffer[0] == 0x03) { - stv680->VideoMode = 0x0300; - PDEBUG (0, "STV(i): Video Mode set to QVGA"); - } - } - if ((i = stv_sndctrl (0, stv680, 0x8f, 0, buffer, 0x10)) != 0x10) - goto error; - bufsize = (buffer[0] << 24) | (buffer[1] << 16) | (buffer[2] << 8) | (buffer[3]); - stv680->cwidth = (buffer[4] << 8) | (buffer[5]); /* ->camera = 322, 356, 644 */ - stv680->cheight = (buffer[6] << 8) | (buffer[7]); /* ->camera = 242, 292, 484 */ - stv680->origGain = buffer[12]; - - goto exit; - -error: - i = stv_sndctrl (0, stv680, 0x80, 0, buffer, 0x02); /* Get Last Error */ - PDEBUG (1, "STV(i): last error: %i, command = 0x%x", buffer[0], buffer[1]); - kfree(buffer); - return -1; - -exit: - kfree(buffer); - - /* video = 320x240, 352x288 */ - if (stv680->CIF == 1) { - stv680->maxwidth = 352; - stv680->maxheight = 288; - stv680->vwidth = 352; - stv680->vheight = 288; - } - if (stv680->QVGA == 1) { - stv680->maxwidth = 320; - stv680->maxheight = 240; - stv680->vwidth = 320; - stv680->vheight = 240; - } - - stv680->rawbufsize = bufsize; /* must be ./. by 8 */ - stv680->maxframesize = bufsize * 3; /* RGB size */ - PDEBUG (2, "STV(i): cwidth = %i, cheight = %i", stv680->cwidth, stv680->cheight); - PDEBUG (1, "STV(i): width = %i, height = %i, rawbufsize = %li", stv680->vwidth, stv680->vheight, stv680->rawbufsize); - - /* some default values */ - stv680->bulk_in_endpointAddr = 0x82; - stv680->dropped = 0; - stv680->error = 0; - stv680->framecount = 0; - stv680->readcount = 0; - stv680->streaming = 0; - /* bright, white, colour, hue, contrast are set by software, not in stv0680 */ - stv680->brightness = 32767; - stv680->chgbright = 0; - stv680->whiteness = 0; /* only for greyscale */ - stv680->colour = 32767; - stv680->contrast = 32767; - stv680->hue = 32767; - stv680->palette = STV_VIDEO_PALETTE; - stv680->depth = 24; /* rgb24 bits */ - if ((swapRGB_on == 0) && (swapRGB == 0)) - PDEBUG (1, "STV(i): swapRGB is (auto) OFF"); - else if ((swapRGB_on == 0) && (swapRGB == 1)) - PDEBUG (1, "STV(i): swapRGB is (auto) ON"); - else if (swapRGB_on == 1) - PDEBUG (1, "STV(i): swapRGB is (forced) ON"); - else if (swapRGB_on == -1) - PDEBUG (1, "STV(i): swapRGB is (forced) OFF"); - - if (stv_set_video_mode (stv680) < 0) { - PDEBUG (0, "STV(e): Could not set video mode in stv_init"); - return -1; - } - - return 0; -} - -/***************** last of pencam routines *******************/ - -/**************************************************************************** - * sysfs - ***************************************************************************/ -#define stv680_file(name, variable, field) \ -static ssize_t show_##name(struct device *class_dev, \ - struct device_attribute *attr, char *buf) \ -{ \ - struct video_device *vdev = to_video_device(class_dev); \ - struct usb_stv *stv = video_get_drvdata(vdev); \ - return sprintf(buf, field, stv->variable); \ -} \ -static DEVICE_ATTR(name, S_IRUGO, show_##name, NULL); - -stv680_file(model, camera_name, "%s\n"); -stv680_file(in_use, user, "%d\n"); -stv680_file(streaming, streaming, "%d\n"); -stv680_file(palette, palette, "%i\n"); -stv680_file(frames_total, readcount, "%d\n"); -stv680_file(frames_read, framecount, "%d\n"); -stv680_file(packets_dropped, dropped, "%d\n"); -stv680_file(decoding_errors, error, "%d\n"); - -static int stv680_create_sysfs_files(struct video_device *vdev) -{ - int rc; - - rc = device_create_file(&vdev->dev, &dev_attr_model); - if (rc) goto err; - rc = device_create_file(&vdev->dev, &dev_attr_in_use); - if (rc) goto err_model; - rc = device_create_file(&vdev->dev, &dev_attr_streaming); - if (rc) goto err_inuse; - rc = device_create_file(&vdev->dev, &dev_attr_palette); - if (rc) goto err_stream; - rc = device_create_file(&vdev->dev, &dev_attr_frames_total); - if (rc) goto err_pal; - rc = device_create_file(&vdev->dev, &dev_attr_frames_read); - if (rc) goto err_framtot; - rc = device_create_file(&vdev->dev, &dev_attr_packets_dropped); - if (rc) goto err_framread; - rc = device_create_file(&vdev->dev, &dev_attr_decoding_errors); - if (rc) goto err_dropped; - - return 0; - -err_dropped: - device_remove_file(&vdev->dev, &dev_attr_packets_dropped); -err_framread: - device_remove_file(&vdev->dev, &dev_attr_frames_read); -err_framtot: - device_remove_file(&vdev->dev, &dev_attr_frames_total); -err_pal: - device_remove_file(&vdev->dev, &dev_attr_palette); -err_stream: - device_remove_file(&vdev->dev, &dev_attr_streaming); -err_inuse: - device_remove_file(&vdev->dev, &dev_attr_in_use); -err_model: - device_remove_file(&vdev->dev, &dev_attr_model); -err: - PDEBUG(0, "STV(e): Could not create sysfs files"); - return rc; -} - -static void stv680_remove_sysfs_files(struct video_device *vdev) -{ - device_remove_file(&vdev->dev, &dev_attr_model); - device_remove_file(&vdev->dev, &dev_attr_in_use); - device_remove_file(&vdev->dev, &dev_attr_streaming); - device_remove_file(&vdev->dev, &dev_attr_palette); - device_remove_file(&vdev->dev, &dev_attr_frames_total); - device_remove_file(&vdev->dev, &dev_attr_frames_read); - device_remove_file(&vdev->dev, &dev_attr_packets_dropped); - device_remove_file(&vdev->dev, &dev_attr_decoding_errors); -} - -/******************************************************************** - * Camera control - *******************************************************************/ - -static int stv680_get_pict (struct usb_stv *stv680, struct video_picture *p) -{ - /* This sets values for v4l interface. max/min = 65535/0 */ - - p->brightness = stv680->brightness; - p->whiteness = stv680->whiteness; /* greyscale */ - p->colour = stv680->colour; - p->contrast = stv680->contrast; - p->hue = stv680->hue; - p->palette = stv680->palette; - p->depth = stv680->depth; - return 0; -} - -static int stv680_set_pict (struct usb_stv *stv680, struct video_picture *p) -{ - /* See above stv680_get_pict */ - - if (p->palette != STV_VIDEO_PALETTE) { - PDEBUG (2, "STV(e): Palette set error in _set_pic"); - return 1; - } - - if (stv680->brightness != p->brightness) { - stv680->chgbright = 1; - stv680->brightness = p->brightness; - } - - stv680->whiteness = p->whiteness; /* greyscale */ - stv680->colour = p->colour; - stv680->contrast = p->contrast; - stv680->hue = p->hue; - stv680->palette = p->palette; - stv680->depth = p->depth; - - return 0; -} - -static void stv680_video_irq (struct urb *urb) -{ - struct usb_stv *stv680 = urb->context; - int length = urb->actual_length; - - if (length < stv680->rawbufsize) - PDEBUG (2, "STV(i): Lost data in transfer: exp %li, got %i", stv680->rawbufsize, length); - - /* ohoh... */ - if (!stv680->streaming) - return; - - if (!stv680->udev) { - PDEBUG (0, "STV(e): device vapourished in video_irq"); - return; - } - - /* 0 sized packets happen if we are to fast, but sometimes the camera - keeps sending them forever... - */ - if (length && !urb->status) { - stv680->nullpackets = 0; - switch (stv680->scratch[stv680->scratch_next].state) { - case BUFFER_READY: - case BUFFER_BUSY: - stv680->dropped++; - break; - - case BUFFER_UNUSED: - memcpy (stv680->scratch[stv680->scratch_next].data, - (unsigned char *) urb->transfer_buffer, length); - stv680->scratch[stv680->scratch_next].state = BUFFER_READY; - stv680->scratch[stv680->scratch_next].length = length; - if (waitqueue_active (&stv680->wq)) { - wake_up_interruptible (&stv680->wq); - } - stv680->scratch_overflow = 0; - stv680->scratch_next++; - if (stv680->scratch_next >= STV680_NUMSCRATCH) - stv680->scratch_next = 0; - break; - } /* switch */ - } else { - stv680->nullpackets++; - if (stv680->nullpackets > STV680_MAX_NULLPACKETS) { - if (waitqueue_active (&stv680->wq)) { - wake_up_interruptible (&stv680->wq); - } - } - } /* if - else */ - - /* Resubmit urb for new data */ - urb->status = 0; - urb->dev = stv680->udev; - if (usb_submit_urb (urb, GFP_ATOMIC)) - PDEBUG (0, "STV(e): urb burned down in video irq"); - return; -} /* _video_irq */ - -static int stv680_start_stream (struct usb_stv *stv680) -{ - struct urb *urb; - int err = 0, i; - - stv680->streaming = 1; - - /* Do some memory allocation */ - for (i = 0; i < STV680_NUMFRAMES; i++) { - stv680->frame[i].data = stv680->fbuf + i * stv680->maxframesize; - stv680->frame[i].curpix = 0; - } - /* packet size = 4096 */ - for (i = 0; i < STV680_NUMSBUF; i++) { - stv680->sbuf[i].data = kmalloc (stv680->rawbufsize, GFP_KERNEL); - if (stv680->sbuf[i].data == NULL) { - PDEBUG (0, "STV(e): Could not kmalloc raw data buffer %i", i); - goto nomem_err; - } - } - - stv680->scratch_next = 0; - stv680->scratch_use = 0; - stv680->scratch_overflow = 0; - for (i = 0; i < STV680_NUMSCRATCH; i++) { - stv680->scratch[i].data = kmalloc (stv680->rawbufsize, GFP_KERNEL); - if (stv680->scratch[i].data == NULL) { - PDEBUG (0, "STV(e): Could not kmalloc raw scratch buffer %i", i); - goto nomem_err; - } - stv680->scratch[i].state = BUFFER_UNUSED; - } - - for (i = 0; i < STV680_NUMSBUF; i++) { - urb = usb_alloc_urb (0, GFP_KERNEL); - if (!urb) - goto nomem_err; - - /* sbuf is urb->transfer_buffer, later gets memcpyed to scratch */ - usb_fill_bulk_urb (urb, stv680->udev, - usb_rcvbulkpipe (stv680->udev, stv680->bulk_in_endpointAddr), - stv680->sbuf[i].data, stv680->rawbufsize, - stv680_video_irq, stv680); - stv680->urb[i] = urb; - err = usb_submit_urb (stv680->urb[i], GFP_KERNEL); - if (err) { - PDEBUG (0, "STV(e): urb burned down with err " - "%d in start stream %d", err, i); - goto nomem_err; - } - } /* i STV680_NUMSBUF */ - - stv680->framecount = 0; - return 0; - - nomem_err: - for (i = 0; i < STV680_NUMSBUF; i++) { - usb_kill_urb(stv680->urb[i]); - usb_free_urb(stv680->urb[i]); - stv680->urb[i] = NULL; - kfree(stv680->sbuf[i].data); - stv680->sbuf[i].data = NULL; - } - /* used in irq, free only as all URBs are dead */ - for (i = 0; i < STV680_NUMSCRATCH; i++) { - kfree(stv680->scratch[i].data); - stv680->scratch[i].data = NULL; - } - return -ENOMEM; - -} - -static int stv680_stop_stream (struct usb_stv *stv680) -{ - int i; - - if (!stv680->streaming || !stv680->udev) - return 1; - - stv680->streaming = 0; - - for (i = 0; i < STV680_NUMSBUF; i++) - if (stv680->urb[i]) { - usb_kill_urb (stv680->urb[i]); - usb_free_urb (stv680->urb[i]); - stv680->urb[i] = NULL; - kfree(stv680->sbuf[i].data); - } - for (i = 0; i < STV680_NUMSCRATCH; i++) { - kfree(stv680->scratch[i].data); - stv680->scratch[i].data = NULL; - } - - return 0; -} - -static int stv680_set_size (struct usb_stv *stv680, int width, int height) -{ - int wasstreaming = stv680->streaming; - - /* Check to see if we need to change */ - if ((stv680->vwidth == width) && (stv680->vheight == height)) - return 0; - - PDEBUG (1, "STV(i): size request for %i x %i", width, height); - /* Check for a valid mode */ - if ((!width || !height) || ((width & 1) || (height & 1))) { - PDEBUG (1, "STV(e): set_size error: request: v.width = %i, v.height = %i actual: stv.width = %i, stv.height = %i", width, height, stv680->vwidth, stv680->vheight); - return 1; - } - - if ((width < (stv680->maxwidth / 2)) || (height < (stv680->maxheight / 2))) { - width = stv680->maxwidth / 2; - height = stv680->maxheight / 2; - } else if ((width >= 158) && (width <= 166) && (stv680->QVGA == 1)) { - width = 160; - height = 120; - } else if ((width >= 172) && (width <= 180) && (stv680->CIF == 1)) { - width = 176; - height = 144; - } else if ((width >= 318) && (width <= 350) && (stv680->QVGA == 1)) { - width = 320; - height = 240; - } else if ((width >= 350) && (width <= 358) && (stv680->CIF == 1)) { - width = 352; - height = 288; - } else { - PDEBUG (1, "STV(e): request for non-supported size: request: v.width = %i, v.height = %i actual: stv.width = %i, stv.height = %i", width, height, stv680->vwidth, stv680->vheight); - return 1; - } - - /* Stop a current stream and start it again at the new size */ - if (wasstreaming) - stv680_stop_stream (stv680); - stv680->vwidth = width; - stv680->vheight = height; - PDEBUG (1, "STV(i): size set to %i x %i", stv680->vwidth, stv680->vheight); - if (wasstreaming) - stv680_start_stream (stv680); - - return 0; -} - -/********************************************************************** - * Video Decoding - **********************************************************************/ - -/******* routines from the pencam program; hey, they work! ********/ - -/* - * STV0680 Vision Camera Chipset Driver - * Copyright (C) 2000 Adam Harrison <adam@antispin.org> -*/ - -#define RED 0 -#define GREEN 1 -#define BLUE 2 -#define AD(x, y, w) (((y)*(w)+(x))*3) - -static void bayer_unshuffle (struct usb_stv *stv680, struct stv680_scratch *buffer) -{ - int x, y, i; - int w = stv680->cwidth; - int vw = stv680->cwidth, vh = stv680->cheight; - unsigned int p = 0; - int colour = 0, bayer = 0; - unsigned char *raw = buffer->data; - struct stv680_frame *frame = &stv680->frame[stv680->curframe]; - unsigned char *output = frame->data; - unsigned char *temp = frame->data; - int offset = buffer->offset; - - if (frame->curpix == 0) { - if (frame->grabstate == FRAME_READY) { - frame->grabstate = FRAME_GRABBING; - } - } - if (offset != frame->curpix) { /* Regard frame as lost :( */ - frame->curpix = 0; - stv680->error++; - return; - } - - if ((stv680->vwidth == 320) || (stv680->vwidth == 160)) { - vw = 320; - vh = 240; - } - if ((stv680->vwidth == 352) || (stv680->vwidth == 176)) { - vw = 352; - vh = 288; - } - - memset (output, 0, 3 * vw * vh); /* clear output matrix. */ - - for (y = 0; y < vh; y++) { - for (x = 0; x < vw; x++) { - if (x & 1) - p = *(raw + y * w + (x >> 1)); - else - p = *(raw + y * w + (x >> 1) + (w >> 1)); - - if (y & 1) - bayer = 2; - else - bayer = 0; - if (x & 1) - bayer++; - - switch (bayer) { - case 0: - case 3: - colour = 1; - break; - case 1: - colour = 0; - break; - case 2: - colour = 2; - break; - } - i = (y * vw + x) * 3; - *(output + i + colour) = (unsigned char) p; - } /* for x */ - - } /* for y */ - - /****** gamma correction plus hardcoded white balance */ - /* Thanks to Alexander Schwartx <alexander.schwartx@gmx.net> for this code. - Correction values red[], green[], blue[], are generated by - (pow(i/256.0, GAMMA)*255.0)*white balanceRGB where GAMMA=0.55, 1<i<255. - White balance (RGB)= 1.0, 1.17, 1.48. Values are calculated as double float and - converted to unsigned char. Values are in stv680.h */ - - for (y = 0; y < vh; y++) { - for (x = 0; x < vw; x++) { - i = (y * vw + x) * 3; - *(output + i) = red[*(output + i)]; - *(output + i + 1) = green[*(output + i + 1)]; - *(output + i + 2) = blue[*(output + i + 2)]; - } - } - - /****** bayer demosaic ******/ - for (y = 1; y < (vh - 1); y++) { - for (x = 1; x < (vw - 1); x++) { /* work out pixel type */ - if (y & 1) - bayer = 0; - else - bayer = 2; - if (!(x & 1)) - bayer++; - - switch (bayer) { - case 0: /* green. blue lr, red tb */ - *(output + AD (x, y, vw) + BLUE) = ((int) *(output + AD (x - 1, y, vw) + BLUE) + (int) *(output + AD (x + 1, y, vw) + BLUE)) >> 1; - *(output + AD (x, y, vw) + RED) = ((int) *(output + AD (x, y - 1, vw) + RED) + (int) *(output + AD (x, y + 1, vw) + RED)) >> 1; - break; - - case 1: /* blue. green lrtb, red diagonals */ - *(output + AD (x, y, vw) + GREEN) = ((int) *(output + AD (x - 1, y, vw) + GREEN) + (int) *(output + AD (x + 1, y, vw) + GREEN) + (int) *(output + AD (x, y - 1, vw) + GREEN) + (int) *(output + AD (x, y + 1, vw) + GREEN)) >> 2; - *(output + AD (x, y, vw) + RED) = ((int) *(output + AD (x - 1, y - 1, vw) + RED) + (int) *(output + AD (x - 1, y + 1, vw) + RED) + (int) *(output + AD (x + 1, y - 1, vw) + RED) + (int) *(output + AD (x + 1, y + 1, vw) + RED)) >> 2; - break; - - case 2: /* red. green lrtb, blue diagonals */ - *(output + AD (x, y, vw) + GREEN) = ((int) *(output + AD (x - 1, y, vw) + GREEN) + (int) *(output + AD (x + 1, y, vw) + GREEN) + (int) *(output + AD (x, y - 1, vw) + GREEN) + (int) *(output + AD (x, y + 1, vw) + GREEN)) >> 2; - *(output + AD (x, y, vw) + BLUE) = ((int) *(output + AD (x - 1, y - 1, vw) + BLUE) + (int) *(output + AD (x + 1, y - 1, vw) + BLUE) + (int) *(output + AD (x - 1, y + 1, vw) + BLUE) + (int) *(output + AD (x + 1, y + 1, vw) + BLUE)) >> 2; - break; - - case 3: /* green. red lr, blue tb */ - *(output + AD (x, y, vw) + RED) = ((int) *(output + AD (x - 1, y, vw) + RED) + (int) *(output + AD (x + 1, y, vw) + RED)) >> 1; - *(output + AD (x, y, vw) + BLUE) = ((int) *(output + AD (x, y - 1, vw) + BLUE) + (int) *(output + AD (x, y + 1, vw) + BLUE)) >> 1; - break; - } /* switch */ - } /* for x */ - } /* for y - end demosaic */ - - /* fix top and bottom row, left and right side */ - i = vw * 3; - memcpy (output, (output + i), i); - memcpy ((output + (vh * i)), (output + ((vh - 1) * i)), i); - for (y = 0; y < vh; y++) { - i = y * vw * 3; - memcpy ((output + i), (output + i + 3), 3); - memcpy ((output + i + (vw * 3)), (output + i + (vw - 1) * 3), 3); - } - - /* process all raw data, then trim to size if necessary */ - if ((stv680->vwidth == 160) || (stv680->vwidth == 176)) { - i = 0; - for (y = 0; y < vh; y++) { - if (!(y & 1)) { - for (x = 0; x < vw; x++) { - p = (y * vw + x) * 3; - if (!(x & 1)) { - *(output + i) = *(output + p); - *(output + i + 1) = *(output + p + 1); - *(output + i + 2) = *(output + p + 2); - i += 3; - } - } /* for x */ - } - } /* for y */ - } - /* reset to proper width */ - if ((stv680->vwidth == 160)) { - vw = 160; - vh = 120; - } - if ((stv680->vwidth == 176)) { - vw = 176; - vh = 144; - } - - /* output is RGB; some programs want BGR */ - /* swapRGB_on=0 -> program decides; swapRGB_on=1, always swap */ - /* swapRGB_on=-1, never swap */ - if (((swapRGB == 1) && (swapRGB_on != -1)) || (swapRGB_on == 1)) { - for (y = 0; y < vh; y++) { - for (x = 0; x < vw; x++) { - i = (y * vw + x) * 3; - *(temp) = *(output + i); - *(output + i) = *(output + i + 2); - *(output + i + 2) = *(temp); - } - } - } - /* brightness */ - if (stv680->chgbright == 1) { - if (stv680->brightness >= 32767) { - p = (stv680->brightness - 32767) / 256; - for (x = 0; x < (vw * vh * 3); x++) { - if ((*(output + x) + (unsigned char) p) > 255) - *(output + x) = 255; - else - *(output + x) += (unsigned char) p; - } /* for */ - } else { - p = (32767 - stv680->brightness) / 256; - for (x = 0; x < (vw * vh * 3); x++) { - if ((unsigned char) p > *(output + x)) - *(output + x) = 0; - else - *(output + x) -= (unsigned char) p; - } /* for */ - } /* else */ - } - /* if */ - frame->curpix = 0; - frame->curlinepix = 0; - frame->grabstate = FRAME_DONE; - stv680->framecount++; - stv680->readcount++; - if (stv680->frame[(stv680->curframe + 1) & (STV680_NUMFRAMES - 1)].grabstate == FRAME_READY) { - stv680->curframe = (stv680->curframe + 1) & (STV680_NUMFRAMES - 1); - } - -} /* bayer_unshuffle */ - -/******* end routines from the pencam program *********/ - -static int stv680_newframe (struct usb_stv *stv680, int framenr) -{ - int errors = 0; - - while (stv680->streaming && (stv680->frame[framenr].grabstate == FRAME_READY || stv680->frame[framenr].grabstate == FRAME_GRABBING)) { - if (!stv680->frame[framenr].curpix) { - errors++; - } - wait_event_interruptible (stv680->wq, (stv680->scratch[stv680->scratch_use].state == BUFFER_READY)); - - if (stv680->nullpackets > STV680_MAX_NULLPACKETS) { - stv680->nullpackets = 0; - PDEBUG (2, "STV(i): too many null length packets, restarting capture"); - stv680_stop_stream (stv680); - stv680_start_stream (stv680); - } else { - if (stv680->scratch[stv680->scratch_use].state != BUFFER_READY) { - stv680->frame[framenr].grabstate = FRAME_ERROR; - PDEBUG (2, "STV(e): FRAME_ERROR in _newframe"); - return -EIO; - } - stv680->scratch[stv680->scratch_use].state = BUFFER_BUSY; - - bayer_unshuffle (stv680, &stv680->scratch[stv680->scratch_use]); - - stv680->scratch[stv680->scratch_use].state = BUFFER_UNUSED; - stv680->scratch_use++; - if (stv680->scratch_use >= STV680_NUMSCRATCH) - stv680->scratch_use = 0; - if (errors > STV680_MAX_ERRORS) { - errors = 0; - PDEBUG (2, "STV(i): too many errors, restarting capture"); - stv680_stop_stream (stv680); - stv680_start_stream (stv680); - } - } /* else */ - } /* while */ - return 0; -} - -/********************************************************************* - * Video4Linux - *********************************************************************/ - -static int stv_open(struct file *file) -{ - struct video_device *dev = video_devdata(file); - struct usb_stv *stv680 = video_get_drvdata(dev); - int err = 0; - - /* we are called with the BKL held */ - lock_kernel(); - stv680->user = 1; - err = stv_init (stv680); /* main initialization routine for camera */ - - if (err >= 0) { - stv680->fbuf = rvmalloc (stv680->maxframesize * STV680_NUMFRAMES); - if (!stv680->fbuf) { - PDEBUG (0, "STV(e): Could not rvmalloc frame bufer"); - err = -ENOMEM; - } - file->private_data = dev; - } - if (err) - stv680->user = 0; - unlock_kernel(); - - return err; -} - -static int stv_close(struct file *file) -{ - struct video_device *dev = file->private_data; - struct usb_stv *stv680 = video_get_drvdata(dev); - int i; - - for (i = 0; i < STV680_NUMFRAMES; i++) - stv680->frame[i].grabstate = FRAME_UNUSED; - if (stv680->streaming) - stv680_stop_stream (stv680); - - if ((i = stv_stop_video (stv680)) < 0) - PDEBUG (1, "STV(e): stop_video failed in stv_close"); - - rvfree (stv680->fbuf, stv680->maxframesize * STV680_NUMFRAMES); - stv680->user = 0; - - if (stv680->removed) { - kfree(stv680); - stv680 = NULL; - PDEBUG (0, "STV(i): device unregistered"); - } - file->private_data = NULL; - return 0; -} - -static long stv680_do_ioctl(struct file *file, unsigned int cmd, void *arg) -{ - struct video_device *vdev = file->private_data; - struct usb_stv *stv680 = video_get_drvdata(vdev); - - if (!stv680->udev) - return -EIO; - - switch (cmd) { - case VIDIOCGCAP:{ - struct video_capability *b = arg; - - strcpy (b->name, stv680->camera_name); - b->type = VID_TYPE_CAPTURE; - b->channels = 1; - b->audios = 0; - b->maxwidth = stv680->maxwidth; - b->maxheight = stv680->maxheight; - b->minwidth = stv680->maxwidth / 2; - b->minheight = stv680->maxheight / 2; - return 0; - } - case VIDIOCGCHAN:{ - struct video_channel *v = arg; - - if (v->channel != 0) - return -EINVAL; - v->flags = 0; - v->tuners = 0; - v->type = VIDEO_TYPE_CAMERA; - strcpy (v->name, "STV Camera"); - return 0; - } - case VIDIOCSCHAN:{ - struct video_channel *v = arg; - if (v->channel != 0) - return -EINVAL; - return 0; - } - case VIDIOCGPICT:{ - struct video_picture *p = arg; - - stv680_get_pict (stv680, p); - return 0; - } - case VIDIOCSPICT:{ - struct video_picture *p = arg; - - if (stv680_set_pict (stv680, p)) - return -EINVAL; - return 0; - } - case VIDIOCSWIN:{ - struct video_window *vw = arg; - - if (vw->flags) - return -EINVAL; - if (vw->clipcount) - return -EINVAL; - if (vw->width != stv680->vwidth) { - if (stv680_set_size (stv680, vw->width, vw->height)) { - PDEBUG (2, "STV(e): failed (from user) set size in VIDIOCSWIN"); - return -EINVAL; - } - } - return 0; - } - case VIDIOCGWIN:{ - struct video_window *vw = arg; - - vw->x = 0; /* FIXME */ - vw->y = 0; - vw->chromakey = 0; - vw->flags = 0; - vw->clipcount = 0; - vw->width = stv680->vwidth; - vw->height = stv680->vheight; - return 0; - } - case VIDIOCGMBUF:{ - struct video_mbuf *vm = arg; - int i; - - memset (vm, 0, sizeof (*vm)); - vm->size = STV680_NUMFRAMES * stv680->maxframesize; - vm->frames = STV680_NUMFRAMES; - for (i = 0; i < STV680_NUMFRAMES; i++) - vm->offsets[i] = stv680->maxframesize * i; - return 0; - } - case VIDIOCMCAPTURE:{ - struct video_mmap *vm = arg; - - if (vm->format != STV_VIDEO_PALETTE) { - PDEBUG (2, "STV(i): VIDIOCMCAPTURE vm.format (%i) != VIDEO_PALETTE (%i)", - vm->format, STV_VIDEO_PALETTE); - if ((vm->format == 3) && (swapRGB_on == 0)) { - PDEBUG (2, "STV(i): VIDIOCMCAPTURE swapRGB is (auto) ON"); - /* this may fix those apps (e.g., xawtv) that want BGR */ - swapRGB = 1; - } - return -EINVAL; - } - if (vm->frame >= STV680_NUMFRAMES) { - PDEBUG (2, "STV(e): VIDIOCMCAPTURE vm.frame > NUMFRAMES"); - return -EINVAL; - } - if ((stv680->frame[vm->frame].grabstate == FRAME_ERROR) - || (stv680->frame[vm->frame].grabstate == FRAME_GRABBING)) { - PDEBUG (2, "STV(e): VIDIOCMCAPTURE grabstate (%i) error", - stv680->frame[vm->frame].grabstate); - return -EBUSY; - } - /* Is this according to the v4l spec??? */ - if (stv680->vwidth != vm->width) { - if (stv680_set_size (stv680, vm->width, vm->height)) { - PDEBUG (2, "STV(e): VIDIOCMCAPTURE set_size failed"); - return -EINVAL; - } - } - stv680->frame[vm->frame].grabstate = FRAME_READY; - - if (!stv680->streaming) - stv680_start_stream (stv680); - - return 0; - } - case VIDIOCSYNC:{ - int *frame = arg; - int ret = 0; - - if (*frame < 0 || *frame >= STV680_NUMFRAMES) { - PDEBUG (2, "STV(e): Bad frame # in VIDIOCSYNC"); - return -EINVAL; - } - ret = stv680_newframe (stv680, *frame); - stv680->frame[*frame].grabstate = FRAME_UNUSED; - return ret; - } - case VIDIOCGFBUF:{ - struct video_buffer *vb = arg; - - memset (vb, 0, sizeof (*vb)); - return 0; - } - case VIDIOCKEY: - return 0; - case VIDIOCCAPTURE: - { - PDEBUG (2, "STV(e): VIDIOCCAPTURE failed"); - return -EINVAL; - } - case VIDIOCSFBUF: - case VIDIOCGTUNER: - case VIDIOCSTUNER: - case VIDIOCGFREQ: - case VIDIOCSFREQ: - case VIDIOCGAUDIO: - case VIDIOCSAUDIO: - return -EINVAL; - default: - return -ENOIOCTLCMD; - } /* end switch */ - - return 0; -} - -static long stv680_ioctl(struct file *file, - unsigned int cmd, unsigned long arg) -{ - return video_usercopy(file, cmd, arg, stv680_do_ioctl); -} - -static int stv680_mmap (struct file *file, struct vm_area_struct *vma) -{ - struct video_device *dev = file->private_data; - struct usb_stv *stv680 = video_get_drvdata(dev); - unsigned long start = vma->vm_start; - unsigned long size = vma->vm_end-vma->vm_start; - unsigned long page, pos; - - mutex_lock(&stv680->lock); - - if (stv680->udev == NULL) { - mutex_unlock(&stv680->lock); - return -EIO; - } - if (size > (((STV680_NUMFRAMES * stv680->maxframesize) + PAGE_SIZE - 1) - & ~(PAGE_SIZE - 1))) { - mutex_unlock(&stv680->lock); - return -EINVAL; - } - pos = (unsigned long) stv680->fbuf; - while (size > 0) { - page = vmalloc_to_pfn((void *)pos); - if (remap_pfn_range(vma, start, page, PAGE_SIZE, PAGE_SHARED)) { - mutex_unlock(&stv680->lock); - return -EAGAIN; - } - start += PAGE_SIZE; - pos += PAGE_SIZE; - if (size > PAGE_SIZE) - size -= PAGE_SIZE; - else - size = 0; - } - mutex_unlock(&stv680->lock); - - return 0; -} - -static ssize_t stv680_read (struct file *file, char __user *buf, - size_t count, loff_t *ppos) -{ - struct video_device *dev = file->private_data; - unsigned long int realcount = count; - int ret = 0; - struct usb_stv *stv680 = video_get_drvdata(dev); - unsigned long int i; - - if (STV680_NUMFRAMES != 2) { - PDEBUG (0, "STV(e): STV680_NUMFRAMES needs to be 2!"); - return -1; - } - if (stv680->udev == NULL) - return -EIO; - if (realcount > (stv680->vwidth * stv680->vheight * 3)) - realcount = stv680->vwidth * stv680->vheight * 3; - - /* Shouldn't happen: */ - if (stv680->frame[0].grabstate == FRAME_GRABBING) { - PDEBUG (2, "STV(e): FRAME_GRABBING in stv680_read"); - return -EBUSY; - } - stv680->frame[0].grabstate = FRAME_READY; - stv680->frame[1].grabstate = FRAME_UNUSED; - stv680->curframe = 0; - - if (!stv680->streaming) - stv680_start_stream (stv680); - - if (!stv680->streaming) { - ret = stv680_newframe (stv680, 0); /* ret should = 0 */ - } - - ret = stv680_newframe (stv680, 0); - - if (!ret) { - if ((i = copy_to_user (buf, stv680->frame[0].data, realcount)) != 0) { - PDEBUG (2, "STV(e): copy_to_user frame 0 failed, ret count = %li", i); - return -EFAULT; - } - } else { - realcount = ret; - } - stv680->frame[0].grabstate = FRAME_UNUSED; - return realcount; -} /* stv680_read */ - -static const struct v4l2_file_operations stv680_fops = { - .owner = THIS_MODULE, - .open = stv_open, - .release = stv_close, - .read = stv680_read, - .mmap = stv680_mmap, - .ioctl = stv680_ioctl, -}; -static struct video_device stv680_template = { - .name = "STV0680 USB camera", - .fops = &stv680_fops, - .release = video_device_release, -}; - -static int stv680_probe (struct usb_interface *intf, const struct usb_device_id *id) -{ - struct usb_device *dev = interface_to_usbdev(intf); - struct usb_host_interface *interface; - struct usb_stv *stv680 = NULL; - char *camera_name = NULL; - int retval = 0; - - /* We don't handle multi-config cameras */ - if (dev->descriptor.bNumConfigurations != 1) { - PDEBUG (0, "STV(e): Number of Configurations != 1"); - return -ENODEV; - } - - interface = &intf->altsetting[0]; - /* Is it a STV680? */ - if ((le16_to_cpu(dev->descriptor.idVendor) == USB_PENCAM_VENDOR_ID) && - (le16_to_cpu(dev->descriptor.idProduct) == USB_PENCAM_PRODUCT_ID)) { - camera_name = "STV0680"; - PDEBUG (0, "STV(i): STV0680 camera found."); - } else if ((le16_to_cpu(dev->descriptor.idVendor) == USB_CREATIVEGOMINI_VENDOR_ID) && - (le16_to_cpu(dev->descriptor.idProduct) == USB_CREATIVEGOMINI_PRODUCT_ID)) { - camera_name = "Creative WebCam Go Mini"; - PDEBUG (0, "STV(i): Creative WebCam Go Mini found."); - } else { - PDEBUG (0, "STV(e): Vendor/Product ID do not match STV0680 or Creative WebCam Go Mini values."); - PDEBUG (0, "STV(e): Check that the STV0680 or Creative WebCam Go Mini camera is connected to the computer."); - retval = -ENODEV; - goto error; - } - /* We found one */ - if ((stv680 = kzalloc (sizeof (*stv680), GFP_KERNEL)) == NULL) { - PDEBUG (0, "STV(e): couldn't kmalloc stv680 struct."); - retval = -ENOMEM; - goto error; - } - - stv680->udev = dev; - stv680->camera_name = camera_name; - - stv680->vdev = video_device_alloc(); - if (!stv680->vdev) { - retval = -ENOMEM; - goto error; - } - memcpy(stv680->vdev, &stv680_template, sizeof(stv680_template)); - stv680->vdev->parent = &intf->dev; - video_set_drvdata(stv680->vdev, stv680); - - memcpy (stv680->vdev->name, stv680->camera_name, strlen (stv680->camera_name)); - init_waitqueue_head (&stv680->wq); - mutex_init (&stv680->lock); - wmb (); - - if (video_register_device(stv680->vdev, VFL_TYPE_GRABBER, video_nr) < 0) { - PDEBUG (0, "STV(e): video_register_device failed"); - retval = -EIO; - goto error_vdev; - } - PDEBUG(0, "STV(i): registered new video device: %s", - video_device_node_name(stv680->vdev)); - - usb_set_intfdata (intf, stv680); - retval = stv680_create_sysfs_files(stv680->vdev); - if (retval) - goto error_unreg; - return 0; - -error_unreg: - video_unregister_device(stv680->vdev); -error_vdev: - video_device_release(stv680->vdev); -error: - kfree(stv680); - return retval; -} - -static inline void usb_stv680_remove_disconnected (struct usb_stv *stv680) -{ - int i; - - stv680->udev = NULL; - stv680->frame[0].grabstate = FRAME_ERROR; - stv680->frame[1].grabstate = FRAME_ERROR; - stv680->streaming = 0; - - wake_up_interruptible (&stv680->wq); - - for (i = 0; i < STV680_NUMSBUF; i++) - if (stv680->urb[i]) { - usb_kill_urb (stv680->urb[i]); - usb_free_urb (stv680->urb[i]); - stv680->urb[i] = NULL; - kfree(stv680->sbuf[i].data); - } - for (i = 0; i < STV680_NUMSCRATCH; i++) - kfree(stv680->scratch[i].data); - PDEBUG (0, "STV(i): %s disconnected", stv680->camera_name); - - /* Free the memory */ - kfree(stv680); -} - -static void stv680_disconnect (struct usb_interface *intf) -{ - struct usb_stv *stv680 = usb_get_intfdata (intf); - - usb_set_intfdata (intf, NULL); - - if (stv680) { - /* We don't want people trying to open up the device */ - if (stv680->vdev) { - stv680_remove_sysfs_files(stv680->vdev); - video_unregister_device(stv680->vdev); - stv680->vdev = NULL; - } - if (!stv680->user) { - usb_stv680_remove_disconnected (stv680); - } else { - stv680->removed = 1; - } - } -} - -static struct usb_driver stv680_driver = { - .name = "stv680", - .probe = stv680_probe, - .disconnect = stv680_disconnect, - .id_table = device_table -}; - -/******************************************************************** - * Module routines - ********************************************************************/ - -static int __init usb_stv680_init (void) -{ - if (usb_register (&stv680_driver) < 0) { - PDEBUG (0, "STV(e): Could not setup STV0680 driver"); - return -1; - } - PDEBUG (0, "STV(i): usb camera driver version %s registering", DRIVER_VERSION); - - printk(KERN_INFO KBUILD_MODNAME ": " DRIVER_VERSION ":" - DRIVER_DESC "\n"); - return 0; -} - -static void __exit usb_stv680_exit (void) -{ - usb_deregister (&stv680_driver); - PDEBUG (0, "STV(i): driver deregistered"); -} - -module_init (usb_stv680_init); -module_exit (usb_stv680_exit); diff --git a/drivers/media/video/stv680.h b/drivers/media/video/stv680.h deleted file mode 100644 index a08f1b08a4b..00000000000 --- a/drivers/media/video/stv680.h +++ /dev/null @@ -1,227 +0,0 @@ -/**************************************************************************** - * - * Filename: stv680.h - * - * Description: - * This is a USB driver for STV0680 based usb video cameras. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - * - ****************************************************************************/ - -/* size of usb transfers */ -#define STV680_PACKETSIZE 4096 - -/* number of queued bulk transfers to use, may have problems if > 1 */ -#define STV680_NUMSBUF 1 - -/* number of frames supported by the v4l part */ -#define STV680_NUMFRAMES 2 - -/* scratch buffers for passing data to the decoders: 2 or 4 are good */ -#define STV680_NUMSCRATCH 2 - -/* number of nul sized packets to receive before kicking the camera */ -#define STV680_MAX_NULLPACKETS 200 - -/* number of decoding errors before kicking the camera */ -#define STV680_MAX_ERRORS 100 - -#define USB_PENCAM_VENDOR_ID 0x0553 -#define USB_PENCAM_PRODUCT_ID 0x0202 - -#define USB_CREATIVEGOMINI_VENDOR_ID 0x041e -#define USB_CREATIVEGOMINI_PRODUCT_ID 0x4007 - -#define PENCAM_TIMEOUT 1000 -/* fmt 4 */ -#define STV_VIDEO_PALETTE VIDEO_PALETTE_RGB24 - -static struct usb_device_id device_table[] = { - {USB_DEVICE (USB_PENCAM_VENDOR_ID, USB_PENCAM_PRODUCT_ID)}, - {USB_DEVICE (USB_CREATIVEGOMINI_VENDOR_ID, USB_CREATIVEGOMINI_PRODUCT_ID)}, - {} -}; -MODULE_DEVICE_TABLE (usb, device_table); - -struct stv680_sbuf { - unsigned char *data; -}; - -enum { - FRAME_UNUSED, /* Unused (no MCAPTURE) */ - FRAME_READY, /* Ready to start grabbing */ - FRAME_GRABBING, /* In the process of being grabbed into */ - FRAME_DONE, /* Finished grabbing, but not been synced yet */ - FRAME_ERROR, /* Something bad happened while processing */ -}; - -enum { - BUFFER_UNUSED, - BUFFER_READY, - BUFFER_BUSY, - BUFFER_DONE, -}; - -/* raw camera data <- sbuf (urb transfer buf) */ -struct stv680_scratch { - unsigned char *data; - volatile int state; - int offset; - int length; -}; - -/* processed data for display ends up here, after bayer */ -struct stv680_frame { - unsigned char *data; /* Frame buffer */ - volatile int grabstate; /* State of grabbing */ - unsigned char *curline; - int curlinepix; - int curpix; -}; - -/* this is almost the video structure uvd_t, with extra parameters for stv */ -struct usb_stv { - struct video_device *vdev; - - struct usb_device *udev; - - unsigned char bulk_in_endpointAddr; /* __u8 the address of the bulk in endpoint */ - char *camera_name; - - unsigned int VideoMode; /* 0x0100 = VGA, 0x0000 = CIF, 0x0300 = QVGA */ - int SupportedModes; - int CIF; - int VGA; - int QVGA; - int cwidth; /* camera width */ - int cheight; /* camera height */ - int maxwidth; /* max video width */ - int maxheight; /* max video height */ - int vwidth; /* current width for video window */ - int vheight; /* current height for video window */ - unsigned long int rawbufsize; - unsigned long int maxframesize; /* rawbufsize * 3 for RGB */ - - int origGain; - int origMode; /* original camera mode */ - - struct mutex lock; /* to lock the structure */ - int user; /* user count for exclusive use */ - int removed; /* device disconnected */ - int streaming; /* Are we streaming video? */ - char *fbuf; /* Videodev buffer area */ - struct urb *urb[STV680_NUMSBUF]; /* # of queued bulk transfers */ - int curframe; /* Current receiving frame */ - struct stv680_frame frame[STV680_NUMFRAMES]; /* # frames supported by v4l part */ - int readcount; - int framecount; - int error; - int dropped; - int scratch_next; - int scratch_use; - int scratch_overflow; - struct stv680_scratch scratch[STV680_NUMSCRATCH]; /* for decoders */ - struct stv680_sbuf sbuf[STV680_NUMSBUF]; - - unsigned int brightness; - unsigned int chgbright; - unsigned int whiteness; - unsigned int colour; - unsigned int contrast; - unsigned int hue; - unsigned int palette; - unsigned int depth; /* rgb24 in bits */ - - wait_queue_head_t wq; /* Processes waiting */ - - int nullpackets; -}; - - -static const unsigned char red[256] = { - 0, 18, 18, 18, 18, 18, 18, 18, 18, 18, 18, 18, - 18, 18, 18, 18, 18, 18, 18, 25, 30, 35, 38, 42, - 44, 47, 50, 53, 54, 57, 59, 61, 63, 65, 67, 69, - 71, 71, 73, 75, 77, 78, 80, 81, 82, 84, 85, 87, - 88, 89, 90, 91, 93, 94, 95, 97, 98, 98, 99, 101, - 102, 103, 104, 105, 106, 107, 108, 109, 110, 111, 112, 113, - 114, 115, 116, 116, 117, 118, 119, 120, 121, 122, 123, 124, - 125, 125, 126, 127, 128, 129, 129, 130, 131, 132, 133, 134, - 134, 135, 135, 136, 137, 138, 139, 140, 140, 141, 142, 143, - 143, 143, 144, 145, 146, 147, 147, 148, 149, 150, 150, 151, - 152, 152, 152, 153, 154, 154, 155, 156, 157, 157, 158, 159, - 159, 160, 161, 161, 161, 162, 163, 163, 164, 165, 165, 166, - 167, 167, 168, 168, 169, 170, 170, 170, 171, 171, 172, 173, - 173, 174, 174, 175, 176, 176, 177, 178, 178, 179, 179, 179, - 180, 180, 181, 181, 182, 183, 183, 184, 184, 185, 185, 186, - 187, 187, 188, 188, 188, 188, 189, 190, 190, 191, 191, 192, - 192, 193, 193, 194, 195, 195, 196, 196, 197, 197, 197, 197, - 198, 198, 199, 199, 200, 201, 201, 202, 202, 203, 203, 204, - 204, 205, 205, 206, 206, 206, 206, 207, 207, 208, 208, 209, - 209, 210, 210, 211, 211, 212, 212, 213, 213, 214, 214, 215, - 215, 215, 215, 216, 216, 217, 217, 218, 218, 218, 219, 219, - 220, 220, 221, 221 -}; - -static const unsigned char green[256] = { - 0, 21, 21, 21, 21, 21, 21, 21, 21, 21, 21, 21, - 21, 21, 21, 21, 21, 21, 21, 28, 34, 39, 43, 47, - 50, 53, 56, 59, 61, 64, 66, 68, 71, 73, 75, 77, - 79, 80, 82, 84, 86, 87, 89, 91, 92, 94, 95, 97, - 98, 100, 101, 102, 104, 105, 106, 108, 109, 110, 111, 113, - 114, 115, 116, 117, 118, 120, 121, 122, 123, 124, 125, 126, - 127, 128, 129, 130, 131, 132, 133, 134, 135, 136, 137, 138, - 139, 140, 141, 142, 143, 144, 144, 145, 146, 147, 148, 149, - 150, 151, 151, 152, 153, 154, 155, 156, 156, 157, 158, 159, - 160, 160, 161, 162, 163, 164, 164, 165, 166, 167, 167, 168, - 169, 170, 170, 171, 172, 172, 173, 174, 175, 175, 176, 177, - 177, 178, 179, 179, 180, 181, 182, 182, 183, 184, 184, 185, - 186, 186, 187, 187, 188, 189, 189, 190, 191, 191, 192, 193, - 193, 194, 194, 195, 196, 196, 197, 198, 198, 199, 199, 200, - 201, 201, 202, 202, 203, 204, 204, 205, 205, 206, 206, 207, - 208, 208, 209, 209, 210, 210, 211, 212, 212, 213, 213, 214, - 214, 215, 215, 216, 217, 217, 218, 218, 219, 219, 220, 220, - 221, 221, 222, 222, 223, 224, 224, 225, 225, 226, 226, 227, - 227, 228, 228, 229, 229, 230, 230, 231, 231, 232, 232, 233, - 233, 234, 234, 235, 235, 236, 236, 237, 237, 238, 238, 239, - 239, 240, 240, 241, 241, 242, 242, 243, 243, 243, 244, 244, - 245, 245, 246, 246 -}; - -static const unsigned char blue[256] = { - 0, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, - 23, 23, 23, 23, 23, 23, 23, 30, 37, 42, 47, 51, - 55, 58, 61, 64, 67, 70, 72, 74, 78, 80, 82, 84, - 86, 88, 90, 92, 94, 95, 97, 100, 101, 103, 104, 106, - 107, 110, 111, 112, 114, 115, 116, 118, 119, 121, 122, 124, - 125, 126, 127, 128, 129, 132, 133, 134, 135, 136, 137, 138, - 139, 140, 141, 143, 144, 145, 146, 147, 148, 149, 150, 151, - 152, 154, 155, 156, 157, 158, 158, 159, 160, 161, 162, 163, - 165, 166, 166, 167, 168, 169, 170, 171, 171, 172, 173, 174, - 176, 176, 177, 178, 179, 180, 180, 181, 182, 183, 183, 184, - 185, 187, 187, 188, 189, 189, 190, 191, 192, 192, 193, 194, - 194, 195, 196, 196, 198, 199, 200, 200, 201, 202, 202, 203, - 204, 204, 205, 205, 206, 207, 207, 209, 210, 210, 211, 212, - 212, 213, 213, 214, 215, 215, 216, 217, 217, 218, 218, 220, - 221, 221, 222, 222, 223, 224, 224, 225, 225, 226, 226, 227, - 228, 228, 229, 229, 231, 231, 232, 233, 233, 234, 234, 235, - 235, 236, 236, 237, 238, 238, 239, 239, 240, 240, 242, 242, - 243, 243, 244, 244, 245, 246, 246, 247, 247, 248, 248, 249, - 249, 250, 250, 251, 251, 253, 253, 254, 254, 255, 255, 255, - 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, - 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, - 255, 255, 255, 255 -}; diff --git a/drivers/media/video/tlg2300/pd-main.c b/drivers/media/video/tlg2300/pd-main.c index 256cc558ba1..4555f4a5f4c 100644 --- a/drivers/media/video/tlg2300/pd-main.c +++ b/drivers/media/video/tlg2300/pd-main.c @@ -227,12 +227,11 @@ static int firmware_download(struct usb_device *udev) fwlength = fw->size; - fwbuf = kzalloc(fwlength, GFP_KERNEL); + fwbuf = kmemdup(fw->data, fwlength, GFP_KERNEL); if (!fwbuf) { ret = -ENOMEM; goto out; } - memcpy(fwbuf, fw->data, fwlength); max_packet_size = udev->ep_out[0x1]->desc.wMaxPacketSize; log("\t\t download size : %d", (int)max_packet_size); diff --git a/drivers/media/video/tw9910.c b/drivers/media/video/tw9910.c index 445dc93413e..a727962781a 100644 --- a/drivers/media/video/tw9910.c +++ b/drivers/media/video/tw9910.c @@ -768,7 +768,7 @@ static int tw9910_g_fmt(struct v4l2_subdev *sd, mf->width = priv->scale->width; mf->height = priv->scale->height; - mf->code = V4L2_MBUS_FMT_YUYV8_2X8_BE; + mf->code = V4L2_MBUS_FMT_UYVY8_2X8; mf->colorspace = V4L2_COLORSPACE_JPEG; mf->field = V4L2_FIELD_INTERLACED_BT; @@ -797,7 +797,7 @@ static int tw9910_s_fmt(struct v4l2_subdev *sd, /* * check color format */ - if (mf->code != V4L2_MBUS_FMT_YUYV8_2X8_BE) + if (mf->code != V4L2_MBUS_FMT_UYVY8_2X8) return -EINVAL; mf->colorspace = V4L2_COLORSPACE_JPEG; @@ -824,7 +824,7 @@ static int tw9910_try_fmt(struct v4l2_subdev *sd, return -EINVAL; } - mf->code = V4L2_MBUS_FMT_YUYV8_2X8_BE; + mf->code = V4L2_MBUS_FMT_UYVY8_2X8; mf->colorspace = V4L2_COLORSPACE_JPEG; /* @@ -909,7 +909,7 @@ static int tw9910_enum_fmt(struct v4l2_subdev *sd, unsigned int index, if (index) return -EINVAL; - *code = V4L2_MBUS_FMT_YUYV8_2X8_BE; + *code = V4L2_MBUS_FMT_UYVY8_2X8; return 0; } diff --git a/drivers/media/video/usbvideo/Kconfig b/drivers/media/video/usbvideo/Kconfig index adb1c044ad7..d6e16959f78 100644 --- a/drivers/media/video/usbvideo/Kconfig +++ b/drivers/media/video/usbvideo/Kconfig @@ -37,17 +37,3 @@ config USB_KONICAWC To compile this driver as a module, choose M here: the module will be called konicawc. -config USB_QUICKCAM_MESSENGER - tristate "USB Logitech Quickcam Messenger (DEPRECATED)" - depends on VIDEO_V4L1 - select VIDEO_USBVIDEO - ---help--- - This driver is DEPRECATED please use the gspca stv06xx module - instead. - - Say Y or M here to enable support for the USB Logitech Quickcam - Messenger webcam. - - To compile this driver as a module, choose M here: the - module will be called quickcam_messenger. - diff --git a/drivers/media/video/usbvideo/Makefile b/drivers/media/video/usbvideo/Makefile index 4a1b144bee4..bb52eb8dc2f 100644 --- a/drivers/media/video/usbvideo/Makefile +++ b/drivers/media/video/usbvideo/Makefile @@ -2,4 +2,3 @@ obj-$(CONFIG_VIDEO_USBVIDEO) += usbvideo.o obj-$(CONFIG_USB_IBMCAM) += ibmcam.o ultracam.o obj-$(CONFIG_USB_KONICAWC) += konicawc.o obj-$(CONFIG_USB_VICAM) += vicam.o -obj-$(CONFIG_USB_QUICKCAM_MESSENGER) += quickcam_messenger.o diff --git a/drivers/media/video/usbvideo/quickcam_messenger.c b/drivers/media/video/usbvideo/quickcam_messenger.c deleted file mode 100644 index fbd665fa197..00000000000 --- a/drivers/media/video/usbvideo/quickcam_messenger.c +++ /dev/null @@ -1,1126 +0,0 @@ -/* - * Driver for Logitech Quickcam Messenger usb video camera - * Copyright (C) Jaya Kumar - * - * This work was sponsored by CIS(M) Sdn Bhd. - * History: - * 05/08/2006 - Jaya Kumar - * I wrote this based on the konicawc by Simon Evans. - * - - * Full credit for reverse engineering and creating an initial - * working linux driver for the VV6422 goes to the qce-ga project by - * Tuukka Toivonen, Jochen Hoenicke, Peter McConnell, - * Cristiano De Michele, Georg Acher, Jean-Frederic Clere as well as - * others. - * --- - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * - */ - -#include <linux/kernel.h> -#include <linux/module.h> -#include <linux/init.h> -#include <linux/input.h> -#include <linux/usb/input.h> -#include <linux/slab.h> - -#include "usbvideo.h" -#include "quickcam_messenger.h" - -/* - * Version Information - */ - -#ifdef CONFIG_USB_DEBUG -static int debug; -#define DEBUG(n, format, arg...) \ - if (n <= debug) { \ - printk(KERN_DEBUG __FILE__ ":%s(): " format "\n", __func__ , ## arg); \ - } -#else -#define DEBUG(n, arg...) -static const int debug; -#endif - -#define DRIVER_VERSION "v0.01" -#define DRIVER_DESC "Logitech Quickcam Messenger USB" - -#define USB_LOGITECH_VENDOR_ID 0x046D -#define USB_QCM_PRODUCT_ID 0x08F0 - -#define MAX_CAMERAS 1 - -#define MAX_COLOUR 32768 -#define MAX_HUE 32768 -#define MAX_BRIGHTNESS 32768 -#define MAX_CONTRAST 32768 -#define MAX_WHITENESS 32768 - -static int size = SIZE_320X240; -static int colour = MAX_COLOUR; -static int hue = MAX_HUE; -static int brightness = MAX_BRIGHTNESS; -static int contrast = MAX_CONTRAST; -static int whiteness = MAX_WHITENESS; - -static struct usbvideo *cams; - -static struct usb_device_id qcm_table [] = { - { USB_DEVICE(USB_LOGITECH_VENDOR_ID, USB_QCM_PRODUCT_ID) }, - { } -}; -MODULE_DEVICE_TABLE(usb, qcm_table); - -#ifdef CONFIG_INPUT -static void qcm_register_input(struct qcm *cam, struct usb_device *dev) -{ - struct input_dev *input_dev; - int error; - - usb_make_path(dev, cam->input_physname, sizeof(cam->input_physname)); - strlcat(cam->input_physname, "/input0", sizeof(cam->input_physname)); - - cam->input = input_dev = input_allocate_device(); - if (!input_dev) { - dev_warn(&dev->dev, "insufficient mem for cam input device\n"); - return; - } - - input_dev->name = "QCM button"; - input_dev->phys = cam->input_physname; - usb_to_input_id(dev, &input_dev->id); - input_dev->dev.parent = &dev->dev; - - input_dev->evbit[0] = BIT_MASK(EV_KEY); - input_dev->keybit[BIT_WORD(KEY_CAMERA)] = BIT_MASK(KEY_CAMERA); - - error = input_register_device(cam->input); - if (error) { - dev_warn(&dev->dev, - "Failed to register camera's input device, err: %d\n", - error); - input_free_device(cam->input); - cam->input = NULL; - } -} - -static void qcm_unregister_input(struct qcm *cam) -{ - if (cam->input) { - input_unregister_device(cam->input); - cam->input = NULL; - } -} - -static void qcm_report_buttonstat(struct qcm *cam) -{ - if (cam->input) { - input_report_key(cam->input, KEY_CAMERA, cam->button_sts); - input_sync(cam->input); - } -} - -static void qcm_int_irq(struct urb *urb) -{ - int ret; - struct uvd *uvd = urb->context; - struct qcm *cam; - - if (!CAMERA_IS_OPERATIONAL(uvd)) - return; - - if (!uvd->streaming) - return; - - uvd->stats.urb_count++; - - if (urb->status < 0) - uvd->stats.iso_err_count++; - else { - if (urb->actual_length > 0 ) { - cam = (struct qcm *) uvd->user_data; - if (cam->button_sts_buf == 0x88) - cam->button_sts = 0x0; - else if (cam->button_sts_buf == 0x80) - cam->button_sts = 0x1; - qcm_report_buttonstat(cam); - } - } - - ret = usb_submit_urb(urb, GFP_ATOMIC); - if (ret < 0) - err("usb_submit_urb error (%d)", ret); -} - -static int qcm_setup_input_int(struct qcm *cam, struct uvd *uvd) -{ - int errflag; - usb_fill_int_urb(cam->button_urb, uvd->dev, - usb_rcvintpipe(uvd->dev, uvd->video_endp + 1), - &cam->button_sts_buf, - 1, - qcm_int_irq, - uvd, 16); - - errflag = usb_submit_urb(cam->button_urb, GFP_KERNEL); - if (errflag) - err ("usb_submit_int ret %d", errflag); - return errflag; -} - -static void qcm_stop_int_data(struct qcm *cam) -{ - usb_kill_urb(cam->button_urb); -} - -static int qcm_alloc_int_urb(struct qcm *cam) -{ - cam->button_urb = usb_alloc_urb(0, GFP_KERNEL); - - if (!cam->button_urb) - return -ENOMEM; - - return 0; -} - -static void qcm_free_int(struct qcm *cam) -{ - usb_free_urb(cam->button_urb); -} -#endif /* CONFIG_INPUT */ - -static int qcm_stv_setb(struct usb_device *dev, u16 reg, u8 val) -{ - int ret; - - /* we'll wait up to 3 slices but no more */ - ret = usb_control_msg(dev, usb_sndctrlpipe(dev, 0), - 0x04, USB_TYPE_VENDOR | USB_DIR_OUT | USB_RECIP_DEVICE, - reg, 0, &val, 1, 3*HZ); - return ret; -} - -static int qcm_stv_setw(struct usb_device *dev, u16 reg, __le16 val) -{ - int ret; - - /* we'll wait up to 3 slices but no more */ - ret = usb_control_msg(dev, usb_sndctrlpipe(dev, 0), - 0x04, USB_TYPE_VENDOR | USB_DIR_OUT | USB_RECIP_DEVICE, - reg, 0, &val, 2, 3*HZ); - return ret; -} - -static int qcm_stv_getw(struct usb_device *dev, unsigned short reg, - __le16 *val) -{ - int ret; - - /* we'll wait up to 3 slices but no more */ - ret = usb_control_msg(dev, usb_rcvctrlpipe(dev, 0), - 0x04, USB_TYPE_VENDOR | USB_DIR_IN | USB_RECIP_DEVICE, - reg, 0, val, 2, 3*HZ); - return ret; -} - -static int qcm_camera_on(struct uvd *uvd) -{ - int ret; - CHECK_RET(ret, qcm_stv_setb(uvd->dev, STV_ISO_ENABLE, 0x01)); - return 0; -} - -static int qcm_camera_off(struct uvd *uvd) -{ - int ret; - CHECK_RET(ret, qcm_stv_setb(uvd->dev, STV_ISO_ENABLE, 0x00)); - return 0; -} - -static void qcm_hsv2rgb(u16 hue, u16 sat, u16 val, u16 *r, u16 *g, u16 *b) -{ - unsigned int segment, valsat; - signed int h = (signed int) hue; - unsigned int s = (sat - 32768) * 2; /* rescale */ - unsigned int v = val; - unsigned int p; - - /* - the registers controlling gain are 8 bit of which - we affect only the last 4 bits with our gain. - we know that if saturation is 0, (unsaturated) then - we're grayscale (center axis of the colour cone) so - we set rgb=value. we use a formula obtained from - wikipedia to map the cone to the RGB plane. it's - as follows for the human value case of h=0..360, - s=0..1, v=0..1 - h_i = h/60 % 6 , f = h/60 - h_i , p = v(1-s) - q = v(1 - f*s) , t = v(1 - (1-f)s) - h_i==0 => r=v , g=t, b=p - h_i==1 => r=q , g=v, b=p - h_i==2 => r=p , g=v, b=t - h_i==3 => r=p , g=q, b=v - h_i==4 => r=t , g=p, b=v - h_i==5 => r=v , g=p, b=q - the bottom side (the point) and the stuff just up - of that is black so we simplify those two cases. - */ - if (sat < 32768) { - /* anything less than this is unsaturated */ - *r = val; - *g = val; - *b = val; - return; - } - if (val <= (0xFFFF/8)) { - /* anything less than this is black */ - *r = 0; - *g = 0; - *b = 0; - return; - } - - /* the rest of this code is copying tukkat's - implementation of the hsv2rgb conversion as taken - from qc-usb-messenger code. the 10923 is 0xFFFF/6 - to divide the cone into 6 sectors. */ - - segment = (h + 10923) & 0xFFFF; - segment = segment*3 >> 16; /* 0..2: 0=R, 1=G, 2=B */ - hue -= segment * 21845; /* -10923..10923 */ - h = hue; - h *= 3; - valsat = v*s >> 16; /* 0..65534 */ - p = v - valsat; - if (h >= 0) { - unsigned int t = v - (valsat * (32769 - h) >> 15); - switch (segment) { - case 0: /* R-> */ - *r = v; - *g = t; - *b = p; - break; - case 1: /* G-> */ - *r = p; - *g = v; - *b = t; - break; - case 2: /* B-> */ - *r = t; - *g = p; - *b = v; - break; - } - } else { - unsigned int q = v - (valsat * (32769 + h) >> 15); - switch (segment) { - case 0: /* ->R */ - *r = v; - *g = p; - *b = q; - break; - case 1: /* ->G */ - *r = q; - *g = v; - *b = p; - break; - case 2: /* ->B */ - *r = p; - *g = q; - *b = v; - break; - } - } -} - -static int qcm_sensor_set_gains(struct uvd *uvd, u16 hue, - u16 saturation, u16 value) -{ - int ret; - u16 r=0,g=0,b=0; - - /* this code is based on qc-usb-messenger */ - qcm_hsv2rgb(hue, saturation, value, &r, &g, &b); - - r >>= 12; - g >>= 12; - b >>= 12; - - /* min val is 8 */ - r = max((u16) 8, r); - g = max((u16) 8, g); - b = max((u16) 8, b); - - r |= 0x30; - g |= 0x30; - b |= 0x30; - - /* set the r,g,b gain registers */ - CHECK_RET(ret, qcm_stv_setb(uvd->dev, 0x0509, r)); - CHECK_RET(ret, qcm_stv_setb(uvd->dev, 0x050A, g)); - CHECK_RET(ret, qcm_stv_setb(uvd->dev, 0x050B, b)); - - /* doing as qc-usb did */ - CHECK_RET(ret, qcm_stv_setb(uvd->dev, 0x050C, 0x2A)); - CHECK_RET(ret, qcm_stv_setb(uvd->dev, 0x050D, 0x01)); - CHECK_RET(ret, qcm_stv_setb(uvd->dev, 0x143F, 0x01)); - - return 0; -} - -static int qcm_sensor_set_exposure(struct uvd *uvd, int exposure) -{ - int ret; - int formedval; - - /* calculation was from qc-usb-messenger driver */ - formedval = ( exposure >> 12 ); - - /* max value for formedval is 14 */ - formedval = min(formedval, 14); - - CHECK_RET(ret, qcm_stv_setb(uvd->dev, - 0x143A, 0xF0 | formedval)); - CHECK_RET(ret, qcm_stv_setb(uvd->dev, 0x143F, 0x01)); - return 0; -} - -static int qcm_sensor_setlevels(struct uvd *uvd, int brightness, int contrast, - int hue, int colour) -{ - int ret; - /* brightness is exposure, contrast is gain, colour is saturation */ - CHECK_RET(ret, - qcm_sensor_set_exposure(uvd, brightness)); - CHECK_RET(ret, qcm_sensor_set_gains(uvd, hue, colour, contrast)); - - return 0; -} - -static int qcm_sensor_setsize(struct uvd *uvd, u8 size) -{ - int ret; - - CHECK_RET(ret, qcm_stv_setb(uvd->dev, 0x1505, size)); - return 0; -} - -static int qcm_sensor_set_shutter(struct uvd *uvd, int whiteness) -{ - int ret; - /* some rescaling as done by the qc-usb-messenger code */ - if (whiteness > 0xC000) - whiteness = 0xC000 + (whiteness & 0x3FFF)*8; - - CHECK_RET(ret, qcm_stv_setb(uvd->dev, 0x143D, - (whiteness >> 8) & 0xFF)); - CHECK_RET(ret, qcm_stv_setb(uvd->dev, 0x143E, - (whiteness >> 16) & 0x03)); - CHECK_RET(ret, qcm_stv_setb(uvd->dev, 0x143F, 0x01)); - - return 0; -} - -static int qcm_sensor_init(struct uvd *uvd) -{ - struct qcm *cam = (struct qcm *) uvd->user_data; - int ret; - int i; - - for (i=0; i < ARRAY_SIZE(regval_table) ; i++) { - CHECK_RET(ret, qcm_stv_setb(uvd->dev, - regval_table[i].reg, - regval_table[i].val)); - } - - CHECK_RET(ret, qcm_stv_setw(uvd->dev, 0x15c1, - cpu_to_le16(ISOC_PACKET_SIZE))); - CHECK_RET(ret, qcm_stv_setb(uvd->dev, 0x15c3, 0x08)); - CHECK_RET(ret, qcm_stv_setb(uvd->dev, 0x143f, 0x01)); - - CHECK_RET(ret, qcm_stv_setb(uvd->dev, STV_ISO_ENABLE, 0x00)); - - CHECK_RET(ret, qcm_sensor_setsize(uvd, camera_sizes[cam->size].cmd)); - - CHECK_RET(ret, qcm_sensor_setlevels(uvd, uvd->vpic.brightness, - uvd->vpic.contrast, uvd->vpic.hue, uvd->vpic.colour)); - - CHECK_RET(ret, qcm_sensor_set_shutter(uvd, uvd->vpic.whiteness)); - CHECK_RET(ret, qcm_sensor_setsize(uvd, camera_sizes[cam->size].cmd)); - - return 0; -} - -static int qcm_set_camera_size(struct uvd *uvd) -{ - int ret; - struct qcm *cam = (struct qcm *) uvd->user_data; - - CHECK_RET(ret, qcm_sensor_setsize(uvd, camera_sizes[cam->size].cmd)); - cam->width = camera_sizes[cam->size].width; - cam->height = camera_sizes[cam->size].height; - uvd->videosize = VIDEOSIZE(cam->width, cam->height); - - return 0; -} - -static int qcm_setup_on_open(struct uvd *uvd) -{ - int ret; - - CHECK_RET(ret, qcm_sensor_set_gains(uvd, uvd->vpic.hue, - uvd->vpic.colour, uvd->vpic.contrast)); - CHECK_RET(ret, qcm_sensor_set_exposure(uvd, uvd->vpic.brightness)); - CHECK_RET(ret, qcm_sensor_set_shutter(uvd, uvd->vpic.whiteness)); - CHECK_RET(ret, qcm_set_camera_size(uvd)); - CHECK_RET(ret, qcm_camera_on(uvd)); - return 0; -} - -static void qcm_adjust_picture(struct uvd *uvd) -{ - int ret; - struct qcm *cam = (struct qcm *) uvd->user_data; - - ret = qcm_camera_off(uvd); - if (ret) { - err("can't turn camera off. abandoning pic adjustment"); - return; - } - - /* if there's been a change in contrast, hue, or - colour then we need to recalculate hsv in order - to update gains */ - if ((cam->contrast != uvd->vpic.contrast) || - (cam->hue != uvd->vpic.hue) || - (cam->colour != uvd->vpic.colour)) { - cam->contrast = uvd->vpic.contrast; - cam->hue = uvd->vpic.hue; - cam->colour = uvd->vpic.colour; - ret = qcm_sensor_set_gains(uvd, cam->hue, cam->colour, - cam->contrast); - if (ret) { - err("can't set gains. abandoning pic adjustment"); - return; - } - } - - if (cam->brightness != uvd->vpic.brightness) { - cam->brightness = uvd->vpic.brightness; - ret = qcm_sensor_set_exposure(uvd, cam->brightness); - if (ret) { - err("can't set exposure. abandoning pic adjustment"); - return; - } - } - - if (cam->whiteness != uvd->vpic.whiteness) { - cam->whiteness = uvd->vpic.whiteness; - qcm_sensor_set_shutter(uvd, cam->whiteness); - if (ret) { - err("can't set shutter. abandoning pic adjustment"); - return; - } - } - - ret = qcm_camera_on(uvd); - if (ret) { - err("can't reenable camera. pic adjustment failed"); - return; - } -} - -static int qcm_process_frame(struct uvd *uvd, u8 *cdata, int framelen) -{ - int datalen; - int totaldata; - struct framehdr { - __be16 id; - __be16 len; - }; - struct framehdr *fhdr; - - totaldata = 0; - while (framelen) { - fhdr = (struct framehdr *) cdata; - datalen = be16_to_cpu(fhdr->len); - framelen -= 4; - cdata += 4; - - if ((fhdr->id) == cpu_to_be16(0x8001)) { - RingQueue_Enqueue(&uvd->dp, marker, 4); - totaldata += 4; - continue; - } - if ((fhdr->id & cpu_to_be16(0xFF00)) == cpu_to_be16(0x0200)) { - RingQueue_Enqueue(&uvd->dp, cdata, datalen); - totaldata += datalen; - } - framelen -= datalen; - cdata += datalen; - } - return totaldata; -} - -static int qcm_compress_iso(struct uvd *uvd, struct urb *dataurb) -{ - int totlen; - int i; - unsigned char *cdata; - - totlen=0; - for (i = 0; i < dataurb->number_of_packets; i++) { - int n = dataurb->iso_frame_desc[i].actual_length; - int st = dataurb->iso_frame_desc[i].status; - - cdata = dataurb->transfer_buffer + - dataurb->iso_frame_desc[i].offset; - - if (st < 0) { - dev_warn(&uvd->dev->dev, - "Data error: packet=%d. len=%d. status=%d.\n", - i, n, st); - uvd->stats.iso_err_count++; - continue; - } - if (!n) - continue; - - totlen += qcm_process_frame(uvd, cdata, n); - } - return totlen; -} - -static void resubmit_urb(struct uvd *uvd, struct urb *urb) -{ - int ret; - - urb->dev = uvd->dev; - ret = usb_submit_urb(urb, GFP_ATOMIC); - if (ret) - err("usb_submit_urb error (%d)", ret); -} - -static void qcm_isoc_irq(struct urb *urb) -{ - int len; - struct uvd *uvd = urb->context; - - if (!CAMERA_IS_OPERATIONAL(uvd)) - return; - - if (!uvd->streaming) - return; - - uvd->stats.urb_count++; - - if (!urb->actual_length) { - resubmit_urb(uvd, urb); - return; - } - - len = qcm_compress_iso(uvd, urb); - resubmit_urb(uvd, urb); - uvd->stats.urb_length = len; - uvd->stats.data_count += len; - if (len) - RingQueue_WakeUpInterruptible(&uvd->dp); -} - -static int qcm_start_data(struct uvd *uvd) -{ - struct qcm *cam = (struct qcm *) uvd->user_data; - int i; - int errflag; - int pktsz; - int err; - - pktsz = uvd->iso_packet_len; - if (!CAMERA_IS_OPERATIONAL(uvd)) { - err("Camera is not operational"); - return -EFAULT; - } - - err = usb_set_interface(uvd->dev, uvd->iface, uvd->ifaceAltActive); - if (err < 0) { - err("usb_set_interface error"); - uvd->last_error = err; - return -EBUSY; - } - - for (i=0; i < USBVIDEO_NUMSBUF; i++) { - int j, k; - struct urb *urb = uvd->sbuf[i].urb; - urb->dev = uvd->dev; - urb->context = uvd; - urb->pipe = usb_rcvisocpipe(uvd->dev, uvd->video_endp); - urb->interval = 1; - urb->transfer_flags = URB_ISO_ASAP; - urb->transfer_buffer = uvd->sbuf[i].data; - urb->complete = qcm_isoc_irq; - urb->number_of_packets = FRAMES_PER_DESC; - urb->transfer_buffer_length = pktsz * FRAMES_PER_DESC; - for (j=k=0; j < FRAMES_PER_DESC; j++, k += pktsz) { - urb->iso_frame_desc[j].offset = k; - urb->iso_frame_desc[j].length = pktsz; - } - } - - uvd->streaming = 1; - uvd->curframe = -1; - for (i=0; i < USBVIDEO_NUMSBUF; i++) { - errflag = usb_submit_urb(uvd->sbuf[i].urb, GFP_KERNEL); - if (errflag) - err ("usb_submit_isoc(%d) ret %d", i, errflag); - } - - CHECK_RET(err, qcm_setup_input_int(cam, uvd)); - CHECK_RET(err, qcm_camera_on(uvd)); - return 0; -} - -static void qcm_stop_data(struct uvd *uvd) -{ - struct qcm *cam; - int i, j; - int ret; - - if ((uvd == NULL) || (!uvd->streaming) || (uvd->dev == NULL)) - return; - cam = (struct qcm *) uvd->user_data; - - ret = qcm_camera_off(uvd); - if (ret) - dev_warn(&uvd->dev->dev, "couldn't turn the cam off.\n"); - - uvd->streaming = 0; - - /* Unschedule all of the iso td's */ - for (i=0; i < USBVIDEO_NUMSBUF; i++) - usb_kill_urb(uvd->sbuf[i].urb); - - qcm_stop_int_data(cam); - - if (!uvd->remove_pending) { - /* Set packet size to 0 */ - j = usb_set_interface(uvd->dev, uvd->iface, - uvd->ifaceAltInactive); - if (j < 0) { - err("usb_set_interface() error %d.", j); - uvd->last_error = j; - } - } -} - -static void qcm_process_isoc(struct uvd *uvd, struct usbvideo_frame *frame) -{ - struct qcm *cam = (struct qcm *) uvd->user_data; - int x; - struct rgb *rgbL0; - struct rgb *rgbL1; - struct bayL0 *bayL0; - struct bayL1 *bayL1; - int hor,ver,hordel,verdel; - assert(frame != NULL); - - switch (cam->size) { - case SIZE_160X120: - hor = 162; ver = 124; hordel = 1; verdel = 2; - break; - case SIZE_320X240: - default: - hor = 324; ver = 248; hordel = 2; verdel = 4; - break; - } - - if (frame->scanstate == ScanState_Scanning) { - while (RingQueue_GetLength(&uvd->dp) >= - 4 + (hor*verdel + hordel)) { - if ((RING_QUEUE_PEEK(&uvd->dp, 0) == 0x00) && - (RING_QUEUE_PEEK(&uvd->dp, 1) == 0xff) && - (RING_QUEUE_PEEK(&uvd->dp, 2) == 0x00) && - (RING_QUEUE_PEEK(&uvd->dp, 3) == 0xff)) { - frame->curline = 0; - frame->scanstate = ScanState_Lines; - frame->frameState = FrameState_Grabbing; - RING_QUEUE_DEQUEUE_BYTES(&uvd->dp, 4); - /* - * if we're starting, we need to discard the first - * 4 lines of y bayer data - * and the first 2 gr elements of x bayer data - */ - RING_QUEUE_DEQUEUE_BYTES(&uvd->dp, - (hor*verdel + hordel)); - break; - } - RING_QUEUE_DEQUEUE_BYTES(&uvd->dp, 1); - } - } - - if (frame->scanstate == ScanState_Scanning) - return; - - /* now we can start processing bayer data so long as we have at least - * 2 lines worth of data. this is the simplest demosaicing method that - * I could think of. I use each 2x2 bayer element without interpolation - * to generate 4 rgb pixels. - */ - while ( frame->curline < cam->height && - (RingQueue_GetLength(&uvd->dp) >= hor*2)) { - /* get 2 lines of bayer for demosaicing - * into 2 lines of RGB */ - RingQueue_Dequeue(&uvd->dp, cam->scratch, hor*2); - bayL0 = (struct bayL0 *) cam->scratch; - bayL1 = (struct bayL1 *) (cam->scratch + hor); - /* frame->curline is the rgb y line */ - rgbL0 = (struct rgb *) - ( frame->data + (cam->width*3*frame->curline)); - /* w/2 because we're already doing 2 pixels */ - rgbL1 = rgbL0 + (cam->width/2); - - for (x=0; x < cam->width; x+=2) { - rgbL0->r = bayL0->r; - rgbL0->g = bayL0->g; - rgbL0->b = bayL1->b; - - rgbL0->r2 = bayL0->r; - rgbL0->g2 = bayL1->g; - rgbL0->b2 = bayL1->b; - - rgbL1->r = bayL0->r; - rgbL1->g = bayL1->g; - rgbL1->b = bayL1->b; - - rgbL1->r2 = bayL0->r; - rgbL1->g2 = bayL1->g; - rgbL1->b2 = bayL1->b; - - rgbL0++; - rgbL1++; - - bayL0++; - bayL1++; - } - - frame->seqRead_Length += cam->width*3*2; - frame->curline += 2; - } - /* See if we filled the frame */ - if (frame->curline == cam->height) { - frame->frameState = FrameState_Done_Hold; - frame->curline = 0; - uvd->curframe = -1; - uvd->stats.frame_num++; - } -} - -/* taken from konicawc */ -static int qcm_set_video_mode(struct uvd *uvd, struct video_window *vw) -{ - int ret; - int newsize; - int oldsize; - int x = vw->width; - int y = vw->height; - struct qcm *cam = (struct qcm *) uvd->user_data; - - if (x > 0 && y > 0) { - DEBUG(2, "trying to find size %d,%d", x, y); - for (newsize = 0; newsize <= MAX_FRAME_SIZE; newsize++) { - if ((camera_sizes[newsize].width == x) && - (camera_sizes[newsize].height == y)) - break; - } - } else - newsize = cam->size; - - if (newsize > MAX_FRAME_SIZE) { - DEBUG(1, "couldn't find size %d,%d", x, y); - return -EINVAL; - } - - if (newsize == cam->size) { - DEBUG(1, "Nothing to do"); - return 0; - } - - qcm_stop_data(uvd); - - if (cam->size != newsize) { - oldsize = cam->size; - cam->size = newsize; - ret = qcm_set_camera_size(uvd); - if (ret) { - err("Couldn't set camera size, err=%d",ret); - /* restore the original size */ - cam->size = oldsize; - return ret; - } - } - - /* Flush the input queue and clear any current frame in progress */ - - RingQueue_Flush(&uvd->dp); - if (uvd->curframe != -1) { - uvd->frame[uvd->curframe].curline = 0; - uvd->frame[uvd->curframe].seqRead_Length = 0; - uvd->frame[uvd->curframe].seqRead_Index = 0; - } - - CHECK_RET(ret, qcm_start_data(uvd)); - return 0; -} - -static int qcm_configure_video(struct uvd *uvd) -{ - int ret; - memset(&uvd->vpic, 0, sizeof(uvd->vpic)); - memset(&uvd->vpic_old, 0x55, sizeof(uvd->vpic_old)); - - uvd->vpic.colour = colour; - uvd->vpic.hue = hue; - uvd->vpic.brightness = brightness; - uvd->vpic.contrast = contrast; - uvd->vpic.whiteness = whiteness; - uvd->vpic.depth = 24; - uvd->vpic.palette = VIDEO_PALETTE_RGB24; - - memset(&uvd->vcap, 0, sizeof(uvd->vcap)); - strcpy(uvd->vcap.name, "QCM USB Camera"); - uvd->vcap.type = VID_TYPE_CAPTURE; - uvd->vcap.channels = 1; - uvd->vcap.audios = 0; - - uvd->vcap.minwidth = camera_sizes[SIZE_160X120].width; - uvd->vcap.minheight = camera_sizes[SIZE_160X120].height; - uvd->vcap.maxwidth = camera_sizes[SIZE_320X240].width; - uvd->vcap.maxheight = camera_sizes[SIZE_320X240].height; - - memset(&uvd->vchan, 0, sizeof(uvd->vchan)); - uvd->vchan.flags = 0 ; - uvd->vchan.tuners = 0; - uvd->vchan.channel = 0; - uvd->vchan.type = VIDEO_TYPE_CAMERA; - strcpy(uvd->vchan.name, "Camera"); - - CHECK_RET(ret, qcm_sensor_init(uvd)); - return 0; -} - -static int qcm_probe(struct usb_interface *intf, - const struct usb_device_id *devid) -{ - int err; - struct uvd *uvd; - struct usb_device *dev = interface_to_usbdev(intf); - struct qcm *cam; - size_t buffer_size; - unsigned char video_ep; - struct usb_host_interface *interface; - struct usb_endpoint_descriptor *endpoint; - int i,j; - unsigned int ifacenum, ifacenum_inact=0; - __le16 sensor_id; - - /* we don't support multiconfig cams */ - if (dev->descriptor.bNumConfigurations != 1) - return -ENODEV; - - /* first check for the video interface and not - * the audio interface */ - interface = &intf->cur_altsetting[0]; - if ((interface->desc.bInterfaceClass != USB_CLASS_VENDOR_SPEC) - || (interface->desc.bInterfaceSubClass != - USB_CLASS_VENDOR_SPEC)) - return -ENODEV; - - /* - walk through each endpoint in each setting in the interface - stop when we find the one that's an isochronous IN endpoint. - */ - for (i=0; i < intf->num_altsetting; i++) { - interface = &intf->cur_altsetting[i]; - ifacenum = interface->desc.bAlternateSetting; - /* walk the end points */ - for (j=0; j < interface->desc.bNumEndpoints; j++) { - endpoint = &interface->endpoint[j].desc; - - if (usb_endpoint_dir_out(endpoint)) - continue; /* not input then not good */ - - buffer_size = le16_to_cpu(endpoint->wMaxPacketSize); - if (!buffer_size) { - ifacenum_inact = ifacenum; - continue; /* 0 pkt size is not what we want */ - } - - if (usb_endpoint_xfer_isoc(endpoint)) { - video_ep = endpoint->bEndpointAddress; - /* break out of the search */ - goto good_videoep; - } - } - } - /* failed out since nothing useful was found */ - err("No suitable endpoint was found\n"); - return -ENODEV; - -good_videoep: - /* disable isochronous stream before doing anything else */ - err = qcm_stv_setb(dev, STV_ISO_ENABLE, 0); - if (err < 0) { - err("Failed to disable sensor stream"); - return -EIO; - } - - /* - Check that this is the same unknown sensor that is known to work. This - sensor is suspected to be the ST VV6422C001. I'll check the same value - that the qc-usb driver checks. This value is probably not even the - sensor ID since it matches the USB dev ID. Oh well. If it doesn't - match, it's probably a diff sensor so exit and apologize. - */ - err = qcm_stv_getw(dev, CMOS_SENSOR_IDREV, &sensor_id); - if (err < 0) { - err("Couldn't read sensor values. Err %d\n",err); - return err; - } - if (sensor_id != cpu_to_le16(0x08F0)) { - err("Sensor ID %x != %x. Unsupported. Sorry\n", - le16_to_cpu(sensor_id), (0x08F0)); - return -ENODEV; - } - - uvd = usbvideo_AllocateDevice(cams); - if (!uvd) - return -ENOMEM; - - cam = (struct qcm *) uvd->user_data; - - /* buf for doing demosaicing */ - cam->scratch = kmalloc(324*2, GFP_KERNEL); - if (!cam->scratch) /* uvd freed in dereg */ - return -ENOMEM; - - /* yes, if we fail after here, cam->scratch gets freed - by qcm_free_uvd */ - - err = qcm_alloc_int_urb(cam); - if (err < 0) - return err; - - /* yes, if we fail after here, int urb gets freed - by qcm_free_uvd */ - - RESTRICT_TO_RANGE(size, SIZE_160X120, SIZE_320X240); - cam->width = camera_sizes[size].width; - cam->height = camera_sizes[size].height; - cam->size = size; - - uvd->debug = debug; - uvd->flags = 0; - uvd->dev = dev; - uvd->iface = intf->altsetting->desc.bInterfaceNumber; - uvd->ifaceAltActive = ifacenum; - uvd->ifaceAltInactive = ifacenum_inact; - uvd->video_endp = video_ep; - uvd->iso_packet_len = buffer_size; - uvd->paletteBits = 1L << VIDEO_PALETTE_RGB24; - uvd->defaultPalette = VIDEO_PALETTE_RGB24; - uvd->canvas = VIDEOSIZE(320, 240); - uvd->videosize = VIDEOSIZE(cam->width, cam->height); - err = qcm_configure_video(uvd); - if (err) { - err("failed to configure video settings"); - return err; - } - - err = usbvideo_RegisterVideoDevice(uvd); - if (err) { /* the uvd gets freed in Deregister */ - err("usbvideo_RegisterVideoDevice() failed."); - return err; - } - - uvd->max_frame_size = (320 * 240 * 3); - qcm_register_input(cam, dev); - usb_set_intfdata(intf, uvd); - return 0; -} - -static void qcm_free_uvd(struct uvd *uvd) -{ - struct qcm *cam = (struct qcm *) uvd->user_data; - - kfree(cam->scratch); - qcm_unregister_input(cam); - qcm_free_int(cam); -} - -static struct usbvideo_cb qcm_driver = { - .probe = qcm_probe, - .setupOnOpen = qcm_setup_on_open, - .processData = qcm_process_isoc, - .setVideoMode = qcm_set_video_mode, - .startDataPump = qcm_start_data, - .stopDataPump = qcm_stop_data, - .adjustPicture = qcm_adjust_picture, - .userFree = qcm_free_uvd -}; - -static int __init qcm_init(void) -{ - printk(KERN_INFO KBUILD_MODNAME ": " DRIVER_VERSION ":" - DRIVER_DESC "\n"); - - return usbvideo_register( - &cams, - MAX_CAMERAS, - sizeof(struct qcm), - "QCM", - &qcm_driver, - THIS_MODULE, - qcm_table); -} - -static void __exit qcm_exit(void) -{ - usbvideo_Deregister(&cams); -} - -module_param(size, int, 0); -MODULE_PARM_DESC(size, "Initial Size 0: 160x120 1: 320x240"); -module_param(colour, int, 0); -MODULE_PARM_DESC(colour, "Initial colour"); -module_param(hue, int, 0); -MODULE_PARM_DESC(hue, "Initial hue"); -module_param(brightness, int, 0); -MODULE_PARM_DESC(brightness, "Initial brightness"); -module_param(contrast, int, 0); -MODULE_PARM_DESC(contrast, "Initial contrast"); -module_param(whiteness, int, 0); -MODULE_PARM_DESC(whiteness, "Initial whiteness"); - -#ifdef CONFIG_USB_DEBUG -module_param(debug, int, S_IRUGO | S_IWUSR); -MODULE_PARM_DESC(debug, "Debug level: 0-9 (default=0)"); -#endif - -module_init(qcm_init); -module_exit(qcm_exit); - -MODULE_LICENSE("GPL"); -MODULE_AUTHOR("Jaya Kumar"); -MODULE_DESCRIPTION("QCM USB Camera"); -MODULE_SUPPORTED_DEVICE("QCM USB Camera"); diff --git a/drivers/media/video/usbvideo/quickcam_messenger.h b/drivers/media/video/usbvideo/quickcam_messenger.h deleted file mode 100644 index 17ace394d98..00000000000 --- a/drivers/media/video/usbvideo/quickcam_messenger.h +++ /dev/null @@ -1,112 +0,0 @@ -#ifndef quickcam_messenger_h -#define quickcam_messenger_h - -#ifndef CONFIG_INPUT -/* if we're not using input we dummy out these functions */ -#define qcm_register_input(...) -#define qcm_unregister_input(...) -#define qcm_report_buttonstat(...) -#define qcm_setup_input_int(...) 0 -#define qcm_stop_int_data(...) -#define qcm_alloc_int_urb(...) 0 -#define qcm_free_int(...) -#endif - - -#define CHECK_RET(ret, expr) \ - if ((ret = expr) < 0) return ret - -/* Control Registers for the STVV6422 ASIC - * - this define is taken from the qc-usb-messenger code - */ -#define STV_ISO_ENABLE 0x1440 -#define ISOC_PACKET_SIZE 1023 - -/* Chip identification number including revision indicator */ -#define CMOS_SENSOR_IDREV 0xE00A - -struct rgb { - u8 b; - u8 g; - u8 r; - u8 b2; - u8 g2; - u8 r2; -}; - -struct bayL0 { - u8 g; - u8 r; -}; - -struct bayL1 { - u8 b; - u8 g; -}; - -struct cam_size { - u16 width; - u16 height; - u8 cmd; -}; - -static const struct cam_size camera_sizes[] = { - { 160, 120, 0xf }, - { 320, 240, 0x2 }, -}; - -enum frame_sizes { - SIZE_160X120 = 0, - SIZE_320X240 = 1, -}; - -#define MAX_FRAME_SIZE SIZE_320X240 - -struct qcm { - u16 colour; - u16 hue; - u16 brightness; - u16 contrast; - u16 whiteness; - - u8 size; - int height; - int width; - u8 *scratch; - struct urb *button_urb; - u8 button_sts; - u8 button_sts_buf; - -#ifdef CONFIG_INPUT - struct input_dev *input; - char input_physname[64]; -#endif -}; - -struct regval { - u16 reg; - u8 val; -}; -/* this table is derived from the -qc-usb-messenger code */ -static const struct regval regval_table[] = { - { STV_ISO_ENABLE, 0x00 }, - { 0x1436, 0x00 }, { 0x1432, 0x03 }, - { 0x143a, 0xF9 }, { 0x0509, 0x38 }, - { 0x050a, 0x38 }, { 0x050b, 0x38 }, - { 0x050c, 0x2A }, { 0x050d, 0x01 }, - { 0x1431, 0x00 }, { 0x1433, 0x34 }, - { 0x1438, 0x18 }, { 0x1439, 0x00 }, - { 0x143b, 0x05 }, { 0x143c, 0x00 }, - { 0x143e, 0x01 }, { 0x143d, 0x00 }, - { 0x1442, 0xe2 }, { 0x1500, 0xd0 }, - { 0x1500, 0xd0 }, { 0x1500, 0x50 }, - { 0x1501, 0xaf }, { 0x1502, 0xc2 }, - { 0x1503, 0x45 }, { 0x1505, 0x02 }, - { 0x150e, 0x8e }, { 0x150f, 0x37 }, - { 0x15c0, 0x00 }, -}; - -static const unsigned char marker[] = { 0x00, 0xff, 0x00, 0xFF }; - -#endif /* quickcam_messenger_h */ diff --git a/drivers/media/video/usbvideo/vicam.c b/drivers/media/video/usbvideo/vicam.c index 6030410c667..5d6fd01f918 100644 --- a/drivers/media/video/usbvideo/vicam.c +++ b/drivers/media/video/usbvideo/vicam.c @@ -2,7 +2,7 @@ * USB ViCam WebCam driver * Copyright (c) 2002 Joe Burks (jburks@wavicle.org), * Christopher L Cheney (ccheney@cheney.cx), - * Pavel Machek (pavel@suse.cz), + * Pavel Machek (pavel@ucw.cz), * John Tyner (jtyner@cs.ucr.edu), * Monroe Williams (monroe@pobox.com) * diff --git a/drivers/media/video/uvc/uvc_ctrl.c b/drivers/media/video/uvc/uvc_ctrl.c index 27a79f087b1..a350fad0db4 100644 --- a/drivers/media/video/uvc/uvc_ctrl.c +++ b/drivers/media/video/uvc/uvc_ctrl.c @@ -606,6 +606,26 @@ static struct uvc_control_mapping uvc_ctrl_mappings[] = { .set = uvc_ctrl_set_zoom, }, { + .id = V4L2_CID_PAN_ABSOLUTE, + .name = "Pan (Absolute)", + .entity = UVC_GUID_UVC_CAMERA, + .selector = UVC_CT_PANTILT_ABSOLUTE_CONTROL, + .size = 32, + .offset = 0, + .v4l2_type = V4L2_CTRL_TYPE_INTEGER, + .data_type = UVC_CTRL_DATA_TYPE_UNSIGNED, + }, + { + .id = V4L2_CID_TILT_ABSOLUTE, + .name = "Tilt (Absolute)", + .entity = UVC_GUID_UVC_CAMERA, + .selector = UVC_CT_PANTILT_ABSOLUTE_CONTROL, + .size = 32, + .offset = 32, + .v4l2_type = V4L2_CTRL_TYPE_INTEGER, + .data_type = UVC_CTRL_DATA_TYPE_UNSIGNED, + }, + { .id = V4L2_CID_PRIVACY, .name = "Privacy", .entity = UVC_GUID_UVC_CAMERA, @@ -623,7 +643,7 @@ static struct uvc_control_mapping uvc_ctrl_mappings[] = { static inline __u8 *uvc_ctrl_data(struct uvc_control *ctrl, int id) { - return ctrl->data + id * ctrl->info->size; + return ctrl->uvc_data + id * ctrl->info->size; } static inline int uvc_test_bit(const __u8 *data, int bit) @@ -678,6 +698,14 @@ static void uvc_set_le_value(struct uvc_control_mapping *mapping, int offset = mapping->offset; __u8 mask; + /* According to the v4l2 spec, writing any value to a button control + * should result in the action belonging to the button control being + * triggered. UVC devices however want to see a 1 written -> override + * value. + */ + if (mapping->v4l2_type == V4L2_CTRL_TYPE_BUTTON) + value = -1; + data += offset / 8; offset &= 7; @@ -1265,13 +1293,15 @@ int uvc_ctrl_resume_device(struct uvc_device *dev) * Control and mapping handling */ -static void uvc_ctrl_add_ctrl(struct uvc_device *dev, +static int uvc_ctrl_add_ctrl(struct uvc_device *dev, struct uvc_control_info *info) { struct uvc_entity *entity; struct uvc_control *ctrl = NULL; - int ret, found = 0; + int ret = 0, found = 0; unsigned int i; + u8 *uvc_info; + u8 *uvc_data; list_for_each_entry(entity, &dev->entities, list) { if (!uvc_entity_match_guid(entity, info->entity)) @@ -1290,56 +1320,69 @@ static void uvc_ctrl_add_ctrl(struct uvc_device *dev, } if (!found) - return; + return 0; + + uvc_data = kmalloc(info->size * UVC_CTRL_DATA_LAST + 1, GFP_KERNEL); + if (uvc_data == NULL) + return -ENOMEM; + + uvc_info = uvc_data + info->size * UVC_CTRL_DATA_LAST; if (UVC_ENTITY_TYPE(entity) == UVC_VC_EXTENSION_UNIT) { /* Check if the device control information and length match * the user supplied information. */ - __u32 flags; - __le16 size; - __u8 inf; - ret = uvc_query_ctrl(dev, UVC_GET_LEN, ctrl->entity->id, - dev->intfnum, info->selector, (__u8 *)&size, 2); + dev->intfnum, info->selector, uvc_data, 2); if (ret < 0) { uvc_trace(UVC_TRACE_CONTROL, "GET_LEN failed on control %pUl/%u (%d).\n", info->entity, info->selector, ret); - return; + goto done; } - if (info->size != le16_to_cpu(size)) { + if (info->size != le16_to_cpu(*(__le16 *)uvc_data)) { uvc_trace(UVC_TRACE_CONTROL, "Control %pUl/%u size " "doesn't match user supplied value.\n", info->entity, info->selector); - return; + ret = -EINVAL; + goto done; } ret = uvc_query_ctrl(dev, UVC_GET_INFO, ctrl->entity->id, - dev->intfnum, info->selector, &inf, 1); + dev->intfnum, info->selector, uvc_info, 1); if (ret < 0) { uvc_trace(UVC_TRACE_CONTROL, "GET_INFO failed on control %pUl/%u (%d).\n", info->entity, info->selector, ret); - return; + goto done; } - flags = info->flags; - if (((flags & UVC_CONTROL_GET_CUR) && !(inf & (1 << 0))) || - ((flags & UVC_CONTROL_SET_CUR) && !(inf & (1 << 1)))) { + if (((info->flags & UVC_CONTROL_GET_CUR) && + !(*uvc_info & UVC_CONTROL_CAP_GET)) || + ((info->flags & UVC_CONTROL_SET_CUR) && + !(*uvc_info & UVC_CONTROL_CAP_SET))) { uvc_trace(UVC_TRACE_CONTROL, "Control %pUl/%u flags " "don't match supported operations.\n", info->entity, info->selector); - return; + ret = -EINVAL; + goto done; } } ctrl->info = info; - ctrl->data = kmalloc(ctrl->info->size * UVC_CTRL_DATA_LAST, GFP_KERNEL); + ctrl->uvc_data = uvc_data; + ctrl->uvc_info = uvc_info; + uvc_trace(UVC_TRACE_CONTROL, "Added control %pUl/%u to device %s " "entity %u\n", ctrl->info->entity, ctrl->info->selector, dev->udev->devpath, entity->id); + +done: + if (ret < 0) + kfree(uvc_data); + + return ret; } /* @@ -1572,12 +1615,34 @@ void uvc_ctrl_cleanup_device(struct uvc_device *dev) list_for_each_entry(entity, &dev->entities, list) { for (i = 0; i < entity->ncontrols; ++i) - kfree(entity->controls[i].data); + kfree(entity->controls[i].uvc_data); kfree(entity->controls); } } +void uvc_ctrl_cleanup(void) +{ + struct uvc_control_info *info; + struct uvc_control_info *ni; + struct uvc_control_mapping *mapping; + struct uvc_control_mapping *nm; + + list_for_each_entry_safe(info, ni, &uvc_driver.controls, list) { + if (!(info->flags & UVC_CONTROL_EXTENSION)) + continue; + + list_for_each_entry_safe(mapping, nm, &info->mappings, list) { + list_del(&mapping->list); + kfree(mapping->menu_info); + kfree(mapping); + } + + list_del(&info->list); + kfree(info); + } +} + void uvc_ctrl_init(void) { struct uvc_control_info *ctrl = uvc_ctrls; diff --git a/drivers/media/video/uvc/uvc_driver.c b/drivers/media/video/uvc/uvc_driver.c index 838b56f097c..7eaf99b22a4 100644 --- a/drivers/media/video/uvc/uvc_driver.c +++ b/drivers/media/video/uvc/uvc_driver.c @@ -637,14 +637,13 @@ static int uvc_parse_streaming(struct uvc_device *dev, } streaming->header.bControlSize = n; - streaming->header.bmaControls = kmalloc(p*n, GFP_KERNEL); + streaming->header.bmaControls = kmemdup(&buffer[size], p * n, + GFP_KERNEL); if (streaming->header.bmaControls == NULL) { ret = -ENOMEM; goto error; } - memcpy(streaming->header.bmaControls, &buffer[size], p*n); - buflen -= buffer[0]; buffer += buffer[0]; @@ -2174,6 +2173,15 @@ static struct usb_device_id uvc_ids[] = { .bInterfaceSubClass = 1, .bInterfaceProtocol = 0, .driver_info = UVC_QUIRK_PROBE_EXTRAFIELDS }, + /* Manta MM-353 Plako */ + { .match_flags = USB_DEVICE_ID_MATCH_DEVICE + | USB_DEVICE_ID_MATCH_INT_INFO, + .idVendor = 0x18ec, + .idProduct = 0x3188, + .bInterfaceClass = USB_CLASS_VIDEO, + .bInterfaceSubClass = 1, + .bInterfaceProtocol = 0, + .driver_info = UVC_QUIRK_PROBE_MINMAX }, /* FSC WebCam V30S */ { .match_flags = USB_DEVICE_ID_MATCH_DEVICE | USB_DEVICE_ID_MATCH_INT_INFO, @@ -2261,6 +2269,7 @@ static int __init uvc_init(void) static void __exit uvc_cleanup(void) { usb_deregister(&uvc_driver.driver); + uvc_ctrl_cleanup(); } module_init(uvc_init); diff --git a/drivers/media/video/uvc/uvc_v4l2.c b/drivers/media/video/uvc/uvc_v4l2.c index 7c9ab293349..86db32697b8 100644 --- a/drivers/media/video/uvc/uvc_v4l2.c +++ b/drivers/media/video/uvc/uvc_v4l2.c @@ -29,6 +29,71 @@ #include "uvcvideo.h" /* ------------------------------------------------------------------------ + * UVC ioctls + */ +static int uvc_ioctl_ctrl_map(struct uvc_xu_control_mapping *xmap, int old) +{ + struct uvc_control_mapping *map; + unsigned int size; + int ret; + + map = kzalloc(sizeof *map, GFP_KERNEL); + if (map == NULL) + return -ENOMEM; + + map->id = xmap->id; + memcpy(map->name, xmap->name, sizeof map->name); + memcpy(map->entity, xmap->entity, sizeof map->entity); + map->selector = xmap->selector; + map->size = xmap->size; + map->offset = xmap->offset; + map->v4l2_type = xmap->v4l2_type; + map->data_type = xmap->data_type; + + switch (xmap->v4l2_type) { + case V4L2_CTRL_TYPE_INTEGER: + case V4L2_CTRL_TYPE_BOOLEAN: + case V4L2_CTRL_TYPE_BUTTON: + break; + + case V4L2_CTRL_TYPE_MENU: + if (old) { + ret = -EINVAL; + goto done; + } + + size = xmap->menu_count * sizeof(*map->menu_info); + map->menu_info = kmalloc(size, GFP_KERNEL); + if (map->menu_info == NULL) { + ret = -ENOMEM; + goto done; + } + + if (copy_from_user(map->menu_info, xmap->menu_info, size)) { + ret = -EFAULT; + goto done; + } + + map->menu_count = xmap->menu_count; + break; + + default: + ret = -EINVAL; + goto done; + } + + ret = uvc_ctrl_add_mapping(map); + +done: + if (ret < 0) { + kfree(map->menu_info); + kfree(map); + } + + return ret; +} + +/* ------------------------------------------------------------------------ * V4L2 interface */ @@ -451,7 +516,7 @@ static int uvc_v4l2_open(struct file *file) static int uvc_v4l2_release(struct file *file) { - struct uvc_fh *handle = (struct uvc_fh *)file->private_data; + struct uvc_fh *handle = file->private_data; struct uvc_streaming *stream = handle->stream; uvc_trace(UVC_TRACE_CALLS, "uvc_v4l2_release\n"); @@ -482,7 +547,7 @@ static int uvc_v4l2_release(struct file *file) static long uvc_v4l2_do_ioctl(struct file *file, unsigned int cmd, void *arg) { struct video_device *vdev = video_devdata(file); - struct uvc_fh *handle = (struct uvc_fh *)file->private_data; + struct uvc_fh *handle = file->private_data; struct uvc_video_chain *chain = handle->chain; struct uvc_streaming *stream = handle->stream; long ret = 0; @@ -963,6 +1028,9 @@ static long uvc_v4l2_do_ioctl(struct file *file, unsigned int cmd, void *arg) if (!capable(CAP_SYS_ADMIN)) return -EPERM; + if (xinfo->size == 0) + return -EINVAL; + info = kzalloc(sizeof *info, GFP_KERNEL); if (info == NULL) return -ENOMEM; @@ -974,7 +1042,8 @@ static long uvc_v4l2_do_ioctl(struct file *file, unsigned int cmd, void *arg) info->flags = xinfo->flags; info->flags |= UVC_CONTROL_GET_MIN | UVC_CONTROL_GET_MAX | - UVC_CONTROL_GET_RES | UVC_CONTROL_GET_DEF; + UVC_CONTROL_GET_RES | UVC_CONTROL_GET_DEF | + UVC_CONTROL_EXTENSION; ret = uvc_ctrl_add_info(info); if (ret < 0) @@ -982,32 +1051,12 @@ static long uvc_v4l2_do_ioctl(struct file *file, unsigned int cmd, void *arg) break; } + case UVCIOC_CTRL_MAP_OLD: case UVCIOC_CTRL_MAP: - { - struct uvc_xu_control_mapping *xmap = arg; - struct uvc_control_mapping *map; - if (!capable(CAP_SYS_ADMIN)) return -EPERM; - map = kzalloc(sizeof *map, GFP_KERNEL); - if (map == NULL) - return -ENOMEM; - - map->id = xmap->id; - memcpy(map->name, xmap->name, sizeof map->name); - memcpy(map->entity, xmap->entity, sizeof map->entity); - map->selector = xmap->selector; - map->size = xmap->size; - map->offset = xmap->offset; - map->v4l2_type = xmap->v4l2_type; - map->data_type = xmap->data_type; - - ret = uvc_ctrl_add_mapping(map); - if (ret < 0) - kfree(map); - break; - } + return uvc_ioctl_ctrl_map(arg, cmd == UVCIOC_CTRL_MAP_OLD); case UVCIOC_CTRL_GET: return uvc_xu_ctrl_query(chain, arg, 0); @@ -1067,7 +1116,7 @@ static const struct vm_operations_struct uvc_vm_ops = { static int uvc_v4l2_mmap(struct file *file, struct vm_area_struct *vma) { - struct uvc_fh *handle = (struct uvc_fh *)file->private_data; + struct uvc_fh *handle = file->private_data; struct uvc_streaming *stream = handle->stream; struct uvc_video_queue *queue = &stream->queue; struct uvc_buffer *uninitialized_var(buffer); @@ -1122,7 +1171,7 @@ done: static unsigned int uvc_v4l2_poll(struct file *file, poll_table *wait) { - struct uvc_fh *handle = (struct uvc_fh *)file->private_data; + struct uvc_fh *handle = file->private_data; struct uvc_streaming *stream = handle->stream; uvc_trace(UVC_TRACE_CALLS, "uvc_v4l2_poll\n"); diff --git a/drivers/media/video/uvc/uvcvideo.h b/drivers/media/video/uvc/uvcvideo.h index d1f88406a5e..ac272456fbf 100644 --- a/drivers/media/video/uvc/uvcvideo.h +++ b/drivers/media/video/uvc/uvcvideo.h @@ -27,6 +27,8 @@ #define UVC_CONTROL_RESTORE (1 << 6) /* Control can be updated by the camera. */ #define UVC_CONTROL_AUTO_UPDATE (1 << 7) +/* Control is an extension unit control. */ +#define UVC_CONTROL_EXTENSION (1 << 8) #define UVC_CONTROL_GET_RANGE (UVC_CONTROL_GET_CUR | UVC_CONTROL_GET_MIN | \ UVC_CONTROL_GET_MAX | UVC_CONTROL_GET_RES | \ @@ -40,6 +42,15 @@ struct uvc_xu_control_info { __u32 flags; }; +struct uvc_menu_info { + __u32 value; + __u8 name[32]; +}; + +struct uvc_xu_control_mapping_old { + __u8 reserved[64]; +}; + struct uvc_xu_control_mapping { __u32 id; __u8 name[32]; @@ -50,6 +61,11 @@ struct uvc_xu_control_mapping { __u8 offset; enum v4l2_ctrl_type v4l2_type; __u32 data_type; + + struct uvc_menu_info __user *menu_info; + __u32 menu_count; + + __u32 reserved[4]; }; struct uvc_xu_control { @@ -60,6 +76,7 @@ struct uvc_xu_control { }; #define UVCIOC_CTRL_ADD _IOW('U', 1, struct uvc_xu_control_info) +#define UVCIOC_CTRL_MAP_OLD _IOWR('U', 2, struct uvc_xu_control_mapping_old) #define UVCIOC_CTRL_MAP _IOWR('U', 2, struct uvc_xu_control_mapping) #define UVCIOC_CTRL_GET _IOWR('U', 3, struct uvc_xu_control) #define UVCIOC_CTRL_SET _IOW('U', 4, struct uvc_xu_control) @@ -179,30 +196,6 @@ struct uvc_device; /* TODO: Put the most frequently accessed fields at the beginning of * structures to maximize cache efficiency. */ -struct uvc_streaming_control { - __u16 bmHint; - __u8 bFormatIndex; - __u8 bFrameIndex; - __u32 dwFrameInterval; - __u16 wKeyFrameRate; - __u16 wPFrameRate; - __u16 wCompQuality; - __u16 wCompWindowSize; - __u16 wDelay; - __u32 dwMaxVideoFrameSize; - __u32 dwMaxPayloadTransferSize; - __u32 dwClockFrequency; - __u8 bmFramingInfo; - __u8 bPreferedVersion; - __u8 bMinVersion; - __u8 bMaxVersion; -}; - -struct uvc_menu_info { - __u32 value; - __u8 name[32]; -}; - struct uvc_control_info { struct list_head list; struct list_head mappings; @@ -250,7 +243,8 @@ struct uvc_control { modified : 1, cached : 1; - __u8 *data; + __u8 *uvc_data; + __u8 *uvc_info; }; struct uvc_format_desc { @@ -625,6 +619,7 @@ extern int uvc_ctrl_init_device(struct uvc_device *dev); extern void uvc_ctrl_cleanup_device(struct uvc_device *dev); extern int uvc_ctrl_resume_device(struct uvc_device *dev); extern void uvc_ctrl_init(void); +extern void uvc_ctrl_cleanup(void); extern int uvc_ctrl_begin(struct uvc_video_chain *chain); extern int __uvc_ctrl_commit(struct uvc_video_chain *chain, int rollback); diff --git a/drivers/media/video/v4l2-compat-ioctl32.c b/drivers/media/video/v4l2-compat-ioctl32.c index 9004a5fe764..d2f20c2acae 100644 --- a/drivers/media/video/v4l2-compat-ioctl32.c +++ b/drivers/media/video/v4l2-compat-ioctl32.c @@ -5,7 +5,7 @@ * Copyright (C) 1997-2000 Jakub Jelinek (jakub@redhat.com) * Copyright (C) 1998 Eddie C. Dost (ecd@skynet.be) * Copyright (C) 2001,2002 Andi Kleen, SuSE Labs - * Copyright (C) 2003 Pavel Machek (pavel@suse.cz) + * Copyright (C) 2003 Pavel Machek (pavel@ucw.cz) * Copyright (C) 2005 Philippe De Muyter (phdm@macqel.be) * Copyright (C) 2008 Hans Verkuil <hverkuil@xs4all.nl> * diff --git a/drivers/media/video/v4l2-dev.c b/drivers/media/video/v4l2-dev.c index 0ca7ec9ca90..9e89bf61779 100644 --- a/drivers/media/video/v4l2-dev.c +++ b/drivers/media/video/v4l2-dev.c @@ -410,7 +410,7 @@ static int __video_register_device(struct video_device *vdev, int type, int nr, int minor_offset = 0; int minor_cnt = VIDEO_NUM_DEVICES; const char *name_base; - void *priv = video_get_drvdata(vdev); + void *priv = vdev->dev.p; /* A minor value of -1 marks this video device as never having been registered */ @@ -536,9 +536,9 @@ static int __video_register_device(struct video_device *vdev, int type, int nr, /* Part 4: register the device with sysfs */ memset(&vdev->dev, 0, sizeof(vdev->dev)); - /* The memset above cleared the device's drvdata, so + /* The memset above cleared the device's device_private, so put back the copy we made earlier. */ - video_set_drvdata(vdev, priv); + vdev->dev.p = priv; vdev->dev.class = &video_class; vdev->dev.devt = MKDEV(VIDEO_MAJOR, vdev->minor); if (vdev->parent) diff --git a/drivers/media/video/videobuf-core.c b/drivers/media/video/videobuf-core.c index 7d3378437de..ce1595bef62 100644 --- a/drivers/media/video/videobuf-core.c +++ b/drivers/media/video/videobuf-core.c @@ -52,18 +52,18 @@ MODULE_LICENSE("GPL"); #define CALL(q, f, arg...) \ ((q->int_ops->f) ? q->int_ops->f(arg) : 0) -struct videobuf_buffer *videobuf_alloc(struct videobuf_queue *q) +struct videobuf_buffer *videobuf_alloc_vb(struct videobuf_queue *q) { struct videobuf_buffer *vb; BUG_ON(q->msize < sizeof(*vb)); - if (!q->int_ops || !q->int_ops->alloc) { + if (!q->int_ops || !q->int_ops->alloc_vb) { printk(KERN_ERR "No specific ops defined!\n"); BUG(); } - vb = q->int_ops->alloc(q->msize); + vb = q->int_ops->alloc_vb(q->msize); if (NULL != vb) { init_waitqueue_head(&vb->done); vb->magic = MAGIC_BUFFER; @@ -71,7 +71,7 @@ struct videobuf_buffer *videobuf_alloc(struct videobuf_queue *q) return vb; } -EXPORT_SYMBOL_GPL(videobuf_alloc); +EXPORT_SYMBOL_GPL(videobuf_alloc_vb); #define WAITON_CONDITION (vb->state != VIDEOBUF_ACTIVE &&\ vb->state != VIDEOBUF_QUEUED) @@ -195,6 +195,45 @@ int videobuf_queue_is_busy(struct videobuf_queue *q) } EXPORT_SYMBOL_GPL(videobuf_queue_is_busy); +/** + * __videobuf_free() - free all the buffers and their control structures + * + * This function can only be called if streaming/reading is off, i.e. no buffers + * are under control of the driver. + */ +/* Locking: Caller holds q->vb_lock */ +static int __videobuf_free(struct videobuf_queue *q) +{ + int i; + + dprintk(1, "%s\n", __func__); + if (!q) + return 0; + + if (q->streaming || q->reading) { + dprintk(1, "Cannot free buffers when streaming or reading\n"); + return -EBUSY; + } + + MAGIC_CHECK(q->int_ops->magic, MAGIC_QTYPE_OPS); + + for (i = 0; i < VIDEO_MAX_FRAME; i++) + if (q->bufs[i] && q->bufs[i]->map) { + dprintk(1, "Cannot free mmapped buffers\n"); + return -EBUSY; + } + + for (i = 0; i < VIDEO_MAX_FRAME; i++) { + if (NULL == q->bufs[i]) + continue; + q->ops->buf_release(q, q->bufs[i]); + kfree(q->bufs[i]); + q->bufs[i] = NULL; + } + + return 0; +} + /* Locking: Caller holds q->vb_lock */ void videobuf_queue_cancel(struct videobuf_queue *q) { @@ -308,36 +347,11 @@ static void videobuf_status(struct videobuf_queue *q, struct v4l2_buffer *b, b->sequence = vb->field_count >> 1; } -/* Locking: Caller holds q->vb_lock */ -static int __videobuf_mmap_free(struct videobuf_queue *q) -{ - int i; - - if (!q) - return 0; - - MAGIC_CHECK(q->int_ops->magic, MAGIC_QTYPE_OPS); - - for (i = 0; i < VIDEO_MAX_FRAME; i++) - if (q->bufs[i] && q->bufs[i]->map) - return -EBUSY; - - for (i = 0; i < VIDEO_MAX_FRAME; i++) { - if (NULL == q->bufs[i]) - continue; - q->ops->buf_release(q, q->bufs[i]); - kfree(q->bufs[i]); - q->bufs[i] = NULL; - } - - return 0; -} - int videobuf_mmap_free(struct videobuf_queue *q) { int ret; mutex_lock(&q->vb_lock); - ret = __videobuf_mmap_free(q); + ret = __videobuf_free(q); mutex_unlock(&q->vb_lock); return ret; } @@ -353,13 +367,13 @@ int __videobuf_mmap_setup(struct videobuf_queue *q, MAGIC_CHECK(q->int_ops->magic, MAGIC_QTYPE_OPS); - err = __videobuf_mmap_free(q); + err = __videobuf_free(q); if (0 != err) return err; /* Allocate and initialize buffers */ for (i = 0; i < bcount; i++) { - q->bufs[i] = videobuf_alloc(q); + q->bufs[i] = videobuf_alloc_vb(q); if (NULL == q->bufs[i]) break; @@ -766,7 +780,7 @@ static ssize_t videobuf_read_zerocopy(struct videobuf_queue *q, MAGIC_CHECK(q->int_ops->magic, MAGIC_QTYPE_OPS); /* setup stuff */ - q->read_buf = videobuf_alloc(q); + q->read_buf = videobuf_alloc_vb(q); if (NULL == q->read_buf) return -ENOMEM; @@ -871,7 +885,7 @@ ssize_t videobuf_read_one(struct videobuf_queue *q, if (NULL == q->read_buf) { /* need to capture a new frame */ retval = -ENOMEM; - q->read_buf = videobuf_alloc(q); + q->read_buf = videobuf_alloc_vb(q); dprintk(1, "video alloc=0x%p\n", q->read_buf); if (NULL == q->read_buf) @@ -970,7 +984,7 @@ static void __videobuf_read_stop(struct videobuf_queue *q) int i; videobuf_queue_cancel(q); - __videobuf_mmap_free(q); + __videobuf_free(q); INIT_LIST_HEAD(&q->stream); for (i = 0; i < VIDEO_MAX_FRAME; i++) { if (NULL == q->bufs[i]) diff --git a/drivers/media/video/videobuf-dma-contig.c b/drivers/media/video/videobuf-dma-contig.c index 74730c624cf..372b87efcd0 100644 --- a/drivers/media/video/videobuf-dma-contig.c +++ b/drivers/media/video/videobuf-dma-contig.c @@ -190,7 +190,7 @@ static int videobuf_dma_contig_user_get(struct videobuf_dma_contig_memory *mem, return ret; } -static struct videobuf_buffer *__videobuf_alloc(size_t size) +static struct videobuf_buffer *__videobuf_alloc_vb(size_t size) { struct videobuf_dma_contig_memory *mem; struct videobuf_buffer *vb; @@ -280,8 +280,6 @@ static int __videobuf_mmap_mapper(struct videobuf_queue *q, return -ENOMEM; buf->map = map; - map->start = vma->vm_start; - map->end = vma->vm_end; map->q = q; buf->baddr = vma->vm_start; @@ -338,7 +336,7 @@ error: static struct videobuf_qtype_ops qops = { .magic = MAGIC_QTYPE_OPS, - .alloc = __videobuf_alloc, + .alloc_vb = __videobuf_alloc_vb, .iolock = __videobuf_iolock, .mmap_mapper = __videobuf_mmap_mapper, .vaddr = __videobuf_to_vaddr, diff --git a/drivers/media/video/videobuf-dma-sg.c b/drivers/media/video/videobuf-dma-sg.c index 8359e6badd3..06f9a9c2a39 100644 --- a/drivers/media/video/videobuf-dma-sg.c +++ b/drivers/media/video/videobuf-dma-sg.c @@ -57,7 +57,13 @@ MODULE_LICENSE("GPL"); /* --------------------------------------------------------------------- */ -struct scatterlist *videobuf_vmalloc_to_sg(unsigned char *virt, int nr_pages) +/* + * Return a scatterlist for some page-aligned vmalloc()'ed memory + * block (NULL on errors). Memory for the scatterlist is allocated + * using kmalloc. The caller must free the memory. + */ +static struct scatterlist *videobuf_vmalloc_to_sg(unsigned char *virt, + int nr_pages) { struct scatterlist *sglist; struct page *pg; @@ -81,10 +87,14 @@ err: vfree(sglist); return NULL; } -EXPORT_SYMBOL_GPL(videobuf_vmalloc_to_sg); -struct scatterlist *videobuf_pages_to_sg(struct page **pages, int nr_pages, - int offset) +/* + * Return a scatterlist for a an array of userpages (NULL on errors). + * Memory for the scatterlist is allocated using kmalloc. The caller + * must free the memory. + */ +static struct scatterlist *videobuf_pages_to_sg(struct page **pages, + int nr_pages, int offset) { struct scatterlist *sglist; int i; @@ -201,17 +211,17 @@ int videobuf_dma_init_kernel(struct videobuf_dmabuf *dma, int direction, dprintk(1, "init kernel [%d pages]\n", nr_pages); dma->direction = direction; - dma->vmalloc = vmalloc_32(nr_pages << PAGE_SHIFT); - if (NULL == dma->vmalloc) { + dma->vaddr = vmalloc_32(nr_pages << PAGE_SHIFT); + if (NULL == dma->vaddr) { dprintk(1, "vmalloc_32(%d pages) failed\n", nr_pages); return -ENOMEM; } dprintk(1, "vmalloc is at addr 0x%08lx, size=%d\n", - (unsigned long)dma->vmalloc, + (unsigned long)dma->vaddr, nr_pages << PAGE_SHIFT); - memset(dma->vmalloc, 0, nr_pages << PAGE_SHIFT); + memset(dma->vaddr, 0, nr_pages << PAGE_SHIFT); dma->nr_pages = nr_pages; return 0; @@ -235,7 +245,7 @@ int videobuf_dma_init_overlay(struct videobuf_dmabuf *dma, int direction, } EXPORT_SYMBOL_GPL(videobuf_dma_init_overlay); -int videobuf_dma_map(struct videobuf_queue *q, struct videobuf_dmabuf *dma) +int videobuf_dma_map(struct device *dev, struct videobuf_dmabuf *dma) { MAGIC_CHECK(dma->magic, MAGIC_DMABUF); BUG_ON(0 == dma->nr_pages); @@ -244,8 +254,8 @@ int videobuf_dma_map(struct videobuf_queue *q, struct videobuf_dmabuf *dma) dma->sglist = videobuf_pages_to_sg(dma->pages, dma->nr_pages, dma->offset); } - if (dma->vmalloc) { - dma->sglist = videobuf_vmalloc_to_sg(dma->vmalloc, + if (dma->vaddr) { + dma->sglist = videobuf_vmalloc_to_sg(dma->vaddr, dma->nr_pages); } if (dma->bus_addr) { @@ -263,7 +273,7 @@ int videobuf_dma_map(struct videobuf_queue *q, struct videobuf_dmabuf *dma) return -ENOMEM; } if (!dma->bus_addr) { - dma->sglen = dma_map_sg(q->dev, dma->sglist, + dma->sglen = dma_map_sg(dev, dma->sglist, dma->nr_pages, dma->direction); if (0 == dma->sglen) { printk(KERN_WARNING @@ -279,14 +289,14 @@ int videobuf_dma_map(struct videobuf_queue *q, struct videobuf_dmabuf *dma) } EXPORT_SYMBOL_GPL(videobuf_dma_map); -int videobuf_dma_unmap(struct videobuf_queue *q, struct videobuf_dmabuf *dma) +int videobuf_dma_unmap(struct device *dev, struct videobuf_dmabuf *dma) { MAGIC_CHECK(dma->magic, MAGIC_DMABUF); if (!dma->sglen) return 0; - dma_unmap_sg(q->dev, dma->sglist, dma->sglen, dma->direction); + dma_unmap_sg(dev, dma->sglist, dma->sglen, dma->direction); vfree(dma->sglist); dma->sglist = NULL; @@ -309,8 +319,8 @@ int videobuf_dma_free(struct videobuf_dmabuf *dma) dma->pages = NULL; } - vfree(dma->vmalloc); - dma->vmalloc = NULL; + vfree(dma->vaddr); + dma->vaddr = NULL; if (dma->bus_addr) dma->bus_addr = 0; @@ -322,28 +332,6 @@ EXPORT_SYMBOL_GPL(videobuf_dma_free); /* --------------------------------------------------------------------- */ -int videobuf_sg_dma_map(struct device *dev, struct videobuf_dmabuf *dma) -{ - struct videobuf_queue q; - - q.dev = dev; - - return videobuf_dma_map(&q, dma); -} -EXPORT_SYMBOL_GPL(videobuf_sg_dma_map); - -int videobuf_sg_dma_unmap(struct device *dev, struct videobuf_dmabuf *dma) -{ - struct videobuf_queue q; - - q.dev = dev; - - return videobuf_dma_unmap(&q, dma); -} -EXPORT_SYMBOL_GPL(videobuf_sg_dma_unmap); - -/* --------------------------------------------------------------------- */ - static void videobuf_vm_open(struct vm_area_struct *vma) { struct videobuf_mapping *map = vma->vm_private_data; @@ -428,7 +416,7 @@ static const struct vm_operations_struct videobuf_vm_ops = { struct videobuf_dma_sg_memory */ -static struct videobuf_buffer *__videobuf_alloc(size_t size) +static struct videobuf_buffer *__videobuf_alloc_vb(size_t size) { struct videobuf_dma_sg_memory *mem; struct videobuf_buffer *vb; @@ -456,7 +444,7 @@ static void *__videobuf_to_vaddr(struct videobuf_buffer *buf) MAGIC_CHECK(mem->magic, MAGIC_SG_MEM); - return mem->dma.vmalloc; + return mem->dma.vaddr; } static int __videobuf_iolock(struct videobuf_queue *q, @@ -520,7 +508,7 @@ static int __videobuf_iolock(struct videobuf_queue *q, default: BUG(); } - err = videobuf_dma_map(q, &mem->dma); + err = videobuf_dma_map(q->dev, &mem->dma); if (0 != err) return err; @@ -620,8 +608,6 @@ static int __videobuf_mmap_mapper(struct videobuf_queue *q, } map->count = 1; - map->start = vma->vm_start; - map->end = vma->vm_end; map->q = q; vma->vm_ops = &videobuf_vm_ops; vma->vm_flags |= VM_DONTEXPAND | VM_RESERVED; @@ -638,7 +624,7 @@ done: static struct videobuf_qtype_ops sg_ops = { .magic = MAGIC_QTYPE_OPS, - .alloc = __videobuf_alloc, + .alloc_vb = __videobuf_alloc_vb, .iolock = __videobuf_iolock, .sync = __videobuf_sync, .mmap_mapper = __videobuf_mmap_mapper, @@ -654,7 +640,7 @@ void *videobuf_sg_alloc(size_t size) q.msize = size; - return videobuf_alloc(&q); + return videobuf_alloc_vb(&q); } EXPORT_SYMBOL_GPL(videobuf_sg_alloc); diff --git a/drivers/media/video/videobuf-vmalloc.c b/drivers/media/video/videobuf-vmalloc.c index 583728f4c22..e7fe31d54f0 100644 --- a/drivers/media/video/videobuf-vmalloc.c +++ b/drivers/media/video/videobuf-vmalloc.c @@ -102,10 +102,10 @@ static void videobuf_vm_close(struct vm_area_struct *vma) called with IRQ's disabled */ dprintk(1, "%s: buf[%d] freeing (%p)\n", - __func__, i, mem->vmalloc); + __func__, i, mem->vaddr); - vfree(mem->vmalloc); - mem->vmalloc = NULL; + vfree(mem->vaddr); + mem->vaddr = NULL; } q->bufs[i]->map = NULL; @@ -135,7 +135,7 @@ static const struct vm_operations_struct videobuf_vm_ops = { struct videobuf_dma_sg_memory */ -static struct videobuf_buffer *__videobuf_alloc(size_t size) +static struct videobuf_buffer *__videobuf_alloc_vb(size_t size) { struct videobuf_vmalloc_memory *mem; struct videobuf_buffer *vb; @@ -170,7 +170,7 @@ static int __videobuf_iolock(struct videobuf_queue *q, dprintk(1, "%s memory method MMAP\n", __func__); /* All handling should be done by __videobuf_mmap_mapper() */ - if (!mem->vmalloc) { + if (!mem->vaddr) { printk(KERN_ERR "memory is not alloced/mmapped.\n"); return -EINVAL; } @@ -189,13 +189,13 @@ static int __videobuf_iolock(struct videobuf_queue *q, * read() method. */ - mem->vmalloc = vmalloc_user(pages); - if (!mem->vmalloc) { + mem->vaddr = vmalloc_user(pages); + if (!mem->vaddr) { printk(KERN_ERR "vmalloc (%d pages) failed\n", pages); return -ENOMEM; } dprintk(1, "vmalloc is at addr %p (%d pages)\n", - mem->vmalloc, pages); + mem->vaddr, pages); #if 0 int rc; @@ -245,8 +245,6 @@ static int __videobuf_mmap_mapper(struct videobuf_queue *q, return -ENOMEM; buf->map = map; - map->start = vma->vm_start; - map->end = vma->vm_end; map->q = q; buf->baddr = vma->vm_start; @@ -256,18 +254,18 @@ static int __videobuf_mmap_mapper(struct videobuf_queue *q, MAGIC_CHECK(mem->magic, MAGIC_VMAL_MEM); pages = PAGE_ALIGN(vma->vm_end - vma->vm_start); - mem->vmalloc = vmalloc_user(pages); - if (!mem->vmalloc) { + mem->vaddr = vmalloc_user(pages); + if (!mem->vaddr) { printk(KERN_ERR "vmalloc (%d pages) failed\n", pages); goto error; } - dprintk(1, "vmalloc is at addr %p (%d pages)\n", mem->vmalloc, pages); + dprintk(1, "vmalloc is at addr %p (%d pages)\n", mem->vaddr, pages); /* Try to remap memory */ - retval = remap_vmalloc_range(vma, mem->vmalloc, 0); + retval = remap_vmalloc_range(vma, mem->vaddr, 0); if (retval < 0) { printk(KERN_ERR "mmap: remap failed with error %d. ", retval); - vfree(mem->vmalloc); + vfree(mem->vaddr); goto error; } @@ -293,7 +291,7 @@ error: static struct videobuf_qtype_ops qops = { .magic = MAGIC_QTYPE_OPS, - .alloc = __videobuf_alloc, + .alloc_vb = __videobuf_alloc_vb, .iolock = __videobuf_iolock, .mmap_mapper = __videobuf_mmap_mapper, .vaddr = videobuf_to_vmalloc, @@ -319,7 +317,7 @@ void *videobuf_to_vmalloc(struct videobuf_buffer *buf) BUG_ON(!mem); MAGIC_CHECK(mem->magic, MAGIC_VMAL_MEM); - return mem->vmalloc; + return mem->vaddr; } EXPORT_SYMBOL_GPL(videobuf_to_vmalloc); @@ -341,8 +339,8 @@ void videobuf_vmalloc_free(struct videobuf_buffer *buf) MAGIC_CHECK(mem->magic, MAGIC_VMAL_MEM); - vfree(mem->vmalloc); - mem->vmalloc = NULL; + vfree(mem->vaddr); + mem->vaddr = NULL; return; } diff --git a/drivers/media/video/w9968cf.c b/drivers/media/video/w9968cf.c deleted file mode 100644 index d807eea9175..00000000000 --- a/drivers/media/video/w9968cf.c +++ /dev/null @@ -1,3620 +0,0 @@ -/*************************************************************************** - * Video4Linux driver for W996[87]CF JPEG USB Dual Mode Camera Chip. * - * * - * Copyright (C) 2002-2004 by Luca Risolia <luca.risolia@studio.unibo.it> * - * * - * - Memory management code from bttv driver by Ralph Metzler, * - * Marcus Metzler and Gerd Knorr. * - * - I2C interface to kernel, high-level image sensor control routines and * - * some symbolic names from OV511 driver by Mark W. McClelland. * - * - Low-level I2C fast write function by Piotr Czerczak. * - * - Low-level I2C read function by Frederic Jouault. * - * * - * This program is free software; you can redistribute it and/or modify * - * it under the terms of the GNU General Public License as published by * - * the Free Software Foundation; either version 2 of the License, or * - * (at your option) any later version. * - * * - * This program is distributed in the hope that it will be useful, * - * but WITHOUT ANY WARRANTY; without even the implied warranty of * - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * - * GNU General Public License for more details. * - * * - * You should have received a copy of the GNU General Public License * - * along with this program; if not, write to the Free Software * - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. * - ***************************************************************************/ - -#include <linux/module.h> -#include <linux/kernel.h> -#include <linux/kmod.h> -#include <linux/init.h> -#include <linux/fs.h> -#include <linux/vmalloc.h> -#include <linux/slab.h> -#include <linux/mm.h> -#include <linux/string.h> -#include <linux/errno.h> -#include <linux/sched.h> -#include <linux/ioctl.h> -#include <linux/delay.h> -#include <linux/stddef.h> -#include <asm/page.h> -#include <asm/uaccess.h> -#include <linux/page-flags.h> -#include <linux/videodev.h> -#include <media/v4l2-ioctl.h> - -#include "w9968cf.h" -#include "w9968cf_decoder.h" - -static struct w9968cf_vpp_t* w9968cf_vpp; -static DECLARE_WAIT_QUEUE_HEAD(w9968cf_vppmod_wait); - -static LIST_HEAD(w9968cf_dev_list); /* head of V4L registered cameras list */ -static DEFINE_MUTEX(w9968cf_devlist_mutex); /* semaphore for list traversal */ - -static DECLARE_RWSEM(w9968cf_disconnect); /* prevent races with open() */ - - -/**************************************************************************** - * Module macros and parameters * - ****************************************************************************/ - -MODULE_DEVICE_TABLE(usb, winbond_id_table); - -MODULE_AUTHOR(W9968CF_MODULE_AUTHOR" "W9968CF_AUTHOR_EMAIL); -MODULE_DESCRIPTION(W9968CF_MODULE_NAME); -MODULE_VERSION(W9968CF_MODULE_VERSION); -MODULE_LICENSE(W9968CF_MODULE_LICENSE); -MODULE_SUPPORTED_DEVICE("Video"); - -static unsigned short simcams = W9968CF_SIMCAMS; -static short video_nr[]={[0 ... W9968CF_MAX_DEVICES-1] = -1}; /*-1=first free*/ -static unsigned int packet_size[] = {[0 ... W9968CF_MAX_DEVICES-1] = - W9968CF_PACKET_SIZE}; -static unsigned short max_buffers[] = {[0 ... W9968CF_MAX_DEVICES-1] = - W9968CF_BUFFERS}; -static int double_buffer[] = {[0 ... W9968CF_MAX_DEVICES-1] = - W9968CF_DOUBLE_BUFFER}; -static int clamping[] = {[0 ... W9968CF_MAX_DEVICES-1] = W9968CF_CLAMPING}; -static unsigned short filter_type[]= {[0 ... W9968CF_MAX_DEVICES-1] = - W9968CF_FILTER_TYPE}; -static int largeview[]= {[0 ... W9968CF_MAX_DEVICES-1] = W9968CF_LARGEVIEW}; -static unsigned short decompression[] = {[0 ... W9968CF_MAX_DEVICES-1] = - W9968CF_DECOMPRESSION}; -static int upscaling[]= {[0 ... W9968CF_MAX_DEVICES-1] = W9968CF_UPSCALING}; -static unsigned short force_palette[] = {[0 ... W9968CF_MAX_DEVICES-1] = 0}; -static int force_rgb[] = {[0 ... W9968CF_MAX_DEVICES-1] = W9968CF_FORCE_RGB}; -static int autobright[] = {[0 ... W9968CF_MAX_DEVICES-1] = W9968CF_AUTOBRIGHT}; -static int autoexp[] = {[0 ... W9968CF_MAX_DEVICES-1] = W9968CF_AUTOEXP}; -static unsigned short lightfreq[] = {[0 ... W9968CF_MAX_DEVICES-1] = - W9968CF_LIGHTFREQ}; -static int bandingfilter[] = {[0 ... W9968CF_MAX_DEVICES-1]= - W9968CF_BANDINGFILTER}; -static short clockdiv[] = {[0 ... W9968CF_MAX_DEVICES-1] = W9968CF_CLOCKDIV}; -static int backlight[] = {[0 ... W9968CF_MAX_DEVICES-1] = W9968CF_BACKLIGHT}; -static int mirror[] = {[0 ... W9968CF_MAX_DEVICES-1] = W9968CF_MIRROR}; -static int monochrome[] = {[0 ... W9968CF_MAX_DEVICES-1]=W9968CF_MONOCHROME}; -static unsigned int brightness[] = {[0 ... W9968CF_MAX_DEVICES-1] = - W9968CF_BRIGHTNESS}; -static unsigned int hue[] = {[0 ... W9968CF_MAX_DEVICES-1] = W9968CF_HUE}; -static unsigned int colour[]={[0 ... W9968CF_MAX_DEVICES-1] = W9968CF_COLOUR}; -static unsigned int contrast[] = {[0 ... W9968CF_MAX_DEVICES-1] = - W9968CF_CONTRAST}; -static unsigned int whiteness[] = {[0 ... W9968CF_MAX_DEVICES-1] = - W9968CF_WHITENESS}; -#ifdef W9968CF_DEBUG -static unsigned short debug = W9968CF_DEBUG_LEVEL; -static int specific_debug = W9968CF_SPECIFIC_DEBUG; -#endif - -static unsigned int param_nv[24]; /* number of values per parameter */ - -module_param(simcams, ushort, 0644); -module_param_array(video_nr, short, ¶m_nv[0], 0444); -module_param_array(packet_size, uint, ¶m_nv[1], 0444); -module_param_array(max_buffers, ushort, ¶m_nv[2], 0444); -module_param_array(double_buffer, bool, ¶m_nv[3], 0444); -module_param_array(clamping, bool, ¶m_nv[4], 0444); -module_param_array(filter_type, ushort, ¶m_nv[5], 0444); -module_param_array(largeview, bool, ¶m_nv[6], 0444); -module_param_array(decompression, ushort, ¶m_nv[7], 0444); -module_param_array(upscaling, bool, ¶m_nv[8], 0444); -module_param_array(force_palette, ushort, ¶m_nv[9], 0444); -module_param_array(force_rgb, ushort, ¶m_nv[10], 0444); -module_param_array(autobright, bool, ¶m_nv[11], 0444); -module_param_array(autoexp, bool, ¶m_nv[12], 0444); -module_param_array(lightfreq, ushort, ¶m_nv[13], 0444); -module_param_array(bandingfilter, bool, ¶m_nv[14], 0444); -module_param_array(clockdiv, short, ¶m_nv[15], 0444); -module_param_array(backlight, bool, ¶m_nv[16], 0444); -module_param_array(mirror, bool, ¶m_nv[17], 0444); -module_param_array(monochrome, bool, ¶m_nv[18], 0444); -module_param_array(brightness, uint, ¶m_nv[19], 0444); -module_param_array(hue, uint, ¶m_nv[20], 0444); -module_param_array(colour, uint, ¶m_nv[21], 0444); -module_param_array(contrast, uint, ¶m_nv[22], 0444); -module_param_array(whiteness, uint, ¶m_nv[23], 0444); -#ifdef W9968CF_DEBUG -module_param(debug, ushort, 0644); -module_param(specific_debug, bool, 0644); -#endif - -MODULE_PARM_DESC(simcams, - "\n<n> Number of cameras allowed to stream simultaneously." - "\nn may vary from 0 to " - __MODULE_STRING(W9968CF_MAX_DEVICES)"." - "\nDefault value is "__MODULE_STRING(W9968CF_SIMCAMS)"." - "\n"); -MODULE_PARM_DESC(video_nr, - "\n<-1|n[,...]> Specify V4L minor mode number." - "\n -1 = use next available (default)" - "\n n = use minor number n (integer >= 0)" - "\nYou can specify up to "__MODULE_STRING(W9968CF_MAX_DEVICES) - " cameras this way." - "\nFor example:" - "\nvideo_nr=-1,2,-1 would assign minor number 2 to" - "\nthe second camera and use auto for the first" - "\none and for every other camera." - "\n"); -MODULE_PARM_DESC(packet_size, - "\n<n[,...]> Specify the maximum data payload" - "\nsize in bytes for alternate settings, for each device." - "\nn is scaled between 63 and 1023 " - "(default is "__MODULE_STRING(W9968CF_PACKET_SIZE)")." - "\n"); -MODULE_PARM_DESC(max_buffers, - "\n<n[,...]> For advanced users." - "\nSpecify the maximum number of video frame buffers" - "\nto allocate for each device, from 2 to " - __MODULE_STRING(W9968CF_MAX_BUFFERS) - ". (default is "__MODULE_STRING(W9968CF_BUFFERS)")." - "\n"); -MODULE_PARM_DESC(double_buffer, - "\n<0|1[,...]> " - "Hardware double buffering: 0 disabled, 1 enabled." - "\nIt should be enabled if you want smooth video output: if" - "\nyou obtain out of sync. video, disable it, or try to" - "\ndecrease the 'clockdiv' module parameter value." - "\nDefault value is "__MODULE_STRING(W9968CF_DOUBLE_BUFFER) - " for every device." - "\n"); -MODULE_PARM_DESC(clamping, - "\n<0|1[,...]> Video data clamping: 0 disabled, 1 enabled." - "\nDefault value is "__MODULE_STRING(W9968CF_CLAMPING) - " for every device." - "\n"); -MODULE_PARM_DESC(filter_type, - "\n<0|1|2[,...]> Video filter type." - "\n0 none, 1 (1-2-1) 3-tap filter, " - "2 (2-3-6-3-2) 5-tap filter." - "\nDefault value is "__MODULE_STRING(W9968CF_FILTER_TYPE) - " for every device." - "\nThe filter is used to reduce noise and aliasing artifacts" - "\nproduced by the CCD or CMOS image sensor, and the scaling" - " process." - "\n"); -MODULE_PARM_DESC(largeview, - "\n<0|1[,...]> Large view: 0 disabled, 1 enabled." - "\nDefault value is "__MODULE_STRING(W9968CF_LARGEVIEW) - " for every device." - "\n"); -MODULE_PARM_DESC(upscaling, - "\n<0|1[,...]> Software scaling (for non-compressed video):" - "\n0 disabled, 1 enabled." - "\nDisable it if you have a slow CPU or you don't have" - " enough memory." - "\nDefault value is "__MODULE_STRING(W9968CF_UPSCALING) - " for every device." - "\nIf 'w9968cf-vpp' is not present, this parameter is" - " set to 0." - "\n"); -MODULE_PARM_DESC(decompression, - "\n<0|1|2[,...]> Software video decompression:" - "\n- 0 disables decompression (doesn't allow formats needing" - " decompression)" - "\n- 1 forces decompression (allows formats needing" - " decompression only);" - "\n- 2 allows any permitted formats." - "\nFormats supporting compressed video are YUV422P and" - " YUV420P/YUV420 " - "\nin any resolutions where both width and height are " - "a multiple of 16." - "\nDefault value is "__MODULE_STRING(W9968CF_DECOMPRESSION) - " for every device." - "\nIf 'w9968cf-vpp' is not present, forcing decompression is " - "\nnot allowed; in this case this parameter is set to 2." - "\n"); -MODULE_PARM_DESC(force_palette, - "\n<0" - "|" __MODULE_STRING(VIDEO_PALETTE_UYVY) - "|" __MODULE_STRING(VIDEO_PALETTE_YUV420) - "|" __MODULE_STRING(VIDEO_PALETTE_YUV422P) - "|" __MODULE_STRING(VIDEO_PALETTE_YUV420P) - "|" __MODULE_STRING(VIDEO_PALETTE_YUYV) - "|" __MODULE_STRING(VIDEO_PALETTE_YUV422) - "|" __MODULE_STRING(VIDEO_PALETTE_GREY) - "|" __MODULE_STRING(VIDEO_PALETTE_RGB555) - "|" __MODULE_STRING(VIDEO_PALETTE_RGB565) - "|" __MODULE_STRING(VIDEO_PALETTE_RGB24) - "|" __MODULE_STRING(VIDEO_PALETTE_RGB32) - "[,...]>" - " Force picture palette." - "\nIn order:" - "\n- 0 allows any of the following formats:" - "\n- UYVY 16 bpp - Original video, compression disabled" - "\n- YUV420 12 bpp - Original video, compression enabled" - "\n- YUV422P 16 bpp - Original video, compression enabled" - "\n- YUV420P 12 bpp - Original video, compression enabled" - "\n- YUVY 16 bpp - Software conversion from UYVY" - "\n- YUV422 16 bpp - Software conversion from UYVY" - "\n- GREY 8 bpp - Software conversion from UYVY" - "\n- RGB555 16 bpp - Software conversion from UYVY" - "\n- RGB565 16 bpp - Software conversion from UYVY" - "\n- RGB24 24 bpp - Software conversion from UYVY" - "\n- RGB32 32 bpp - Software conversion from UYVY" - "\nWhen not 0, this parameter will override 'decompression'." - "\nDefault value is 0 for every device." - "\nInitial palette is " - __MODULE_STRING(W9968CF_PALETTE_DECOMP_ON)"." - "\nIf 'w9968cf-vpp' is not present, this parameter is" - " set to 9 (UYVY)." - "\n"); -MODULE_PARM_DESC(force_rgb, - "\n<0|1[,...]> Read RGB video data instead of BGR:" - "\n 1 = use RGB component ordering." - "\n 0 = use BGR component ordering." - "\nThis parameter has effect when using RGBX palettes only." - "\nDefault value is "__MODULE_STRING(W9968CF_FORCE_RGB) - " for every device." - "\n"); -MODULE_PARM_DESC(autobright, - "\n<0|1[,...]> Image sensor automatically changes brightness:" - "\n 0 = no, 1 = yes" - "\nDefault value is "__MODULE_STRING(W9968CF_AUTOBRIGHT) - " for every device." - "\n"); -MODULE_PARM_DESC(autoexp, - "\n<0|1[,...]> Image sensor automatically changes exposure:" - "\n 0 = no, 1 = yes" - "\nDefault value is "__MODULE_STRING(W9968CF_AUTOEXP) - " for every device." - "\n"); -MODULE_PARM_DESC(lightfreq, - "\n<50|60[,...]> Light frequency in Hz:" - "\n 50 for European and Asian lighting," - " 60 for American lighting." - "\nDefault value is "__MODULE_STRING(W9968CF_LIGHTFREQ) - " for every device." - "\n"); -MODULE_PARM_DESC(bandingfilter, - "\n<0|1[,...]> Banding filter to reduce effects of" - " fluorescent lighting:" - "\n 0 disabled, 1 enabled." - "\nThis filter tries to reduce the pattern of horizontal" - "\nlight/dark bands caused by some (usually fluorescent)" - " lighting." - "\nDefault value is "__MODULE_STRING(W9968CF_BANDINGFILTER) - " for every device." - "\n"); -MODULE_PARM_DESC(clockdiv, - "\n<-1|n[,...]> " - "Force pixel clock divisor to a specific value (for experts):" - "\n n may vary from 0 to 127." - "\n -1 for automatic value." - "\nSee also the 'double_buffer' module parameter." - "\nDefault value is "__MODULE_STRING(W9968CF_CLOCKDIV) - " for every device." - "\n"); -MODULE_PARM_DESC(backlight, - "\n<0|1[,...]> Objects are lit from behind:" - "\n 0 = no, 1 = yes" - "\nDefault value is "__MODULE_STRING(W9968CF_BACKLIGHT) - " for every device." - "\n"); -MODULE_PARM_DESC(mirror, - "\n<0|1[,...]> Reverse image horizontally:" - "\n 0 = no, 1 = yes" - "\nDefault value is "__MODULE_STRING(W9968CF_MIRROR) - " for every device." - "\n"); -MODULE_PARM_DESC(monochrome, - "\n<0|1[,...]> Use image sensor as monochrome sensor:" - "\n 0 = no, 1 = yes" - "\nNot all the sensors support monochrome color." - "\nDefault value is "__MODULE_STRING(W9968CF_MONOCHROME) - " for every device." - "\n"); -MODULE_PARM_DESC(brightness, - "\n<n[,...]> Set picture brightness (0-65535)." - "\nDefault value is "__MODULE_STRING(W9968CF_BRIGHTNESS) - " for every device." - "\nThis parameter has no effect if 'autobright' is enabled." - "\n"); -MODULE_PARM_DESC(hue, - "\n<n[,...]> Set picture hue (0-65535)." - "\nDefault value is "__MODULE_STRING(W9968CF_HUE) - " for every device." - "\n"); -MODULE_PARM_DESC(colour, - "\n<n[,...]> Set picture saturation (0-65535)." - "\nDefault value is "__MODULE_STRING(W9968CF_COLOUR) - " for every device." - "\n"); -MODULE_PARM_DESC(contrast, - "\n<n[,...]> Set picture contrast (0-65535)." - "\nDefault value is "__MODULE_STRING(W9968CF_CONTRAST) - " for every device." - "\n"); -MODULE_PARM_DESC(whiteness, - "\n<n[,...]> Set picture whiteness (0-65535)." - "\nDefault value is "__MODULE_STRING(W9968CF_WHITENESS) - " for every device." - "\n"); -#ifdef W9968CF_DEBUG -MODULE_PARM_DESC(debug, - "\n<n> Debugging information level, from 0 to 6:" - "\n0 = none (use carefully)" - "\n1 = critical errors" - "\n2 = significant informations" - "\n3 = configuration or general messages" - "\n4 = warnings" - "\n5 = called functions" - "\n6 = function internals" - "\nLevel 5 and 6 are useful for testing only, when only " - "one device is used." - "\nDefault value is "__MODULE_STRING(W9968CF_DEBUG_LEVEL)"." - "\n"); -MODULE_PARM_DESC(specific_debug, - "\n<0|1> Enable or disable specific debugging messages:" - "\n0 = print messages concerning every level" - " <= 'debug' level." - "\n1 = print messages concerning the level" - " indicated by 'debug'." - "\nDefault value is " - __MODULE_STRING(W9968CF_SPECIFIC_DEBUG)"." - "\n"); -#endif /* W9968CF_DEBUG */ - - - -/**************************************************************************** - * Some prototypes * - ****************************************************************************/ - -/* Video4linux interface */ -static const struct v4l2_file_operations w9968cf_fops; -static int w9968cf_open(struct file *); -static int w9968cf_release(struct file *); -static int w9968cf_mmap(struct file *, struct vm_area_struct *); -static long w9968cf_ioctl(struct file *, unsigned, unsigned long); -static ssize_t w9968cf_read(struct file *, char __user *, size_t, loff_t *); -static long w9968cf_v4l_ioctl(struct file *, unsigned int, - void __user *); - -/* USB-specific */ -static int w9968cf_start_transfer(struct w9968cf_device*); -static int w9968cf_stop_transfer(struct w9968cf_device*); -static int w9968cf_write_reg(struct w9968cf_device*, u16 value, u16 index); -static int w9968cf_read_reg(struct w9968cf_device*, u16 index); -static int w9968cf_write_fsb(struct w9968cf_device*, u16* data); -static int w9968cf_write_sb(struct w9968cf_device*, u16 value); -static int w9968cf_read_sb(struct w9968cf_device*); -static int w9968cf_upload_quantizationtables(struct w9968cf_device*); -static void w9968cf_urb_complete(struct urb *urb); - -/* Low-level I2C (SMBus) I/O */ -static int w9968cf_smbus_start(struct w9968cf_device*); -static int w9968cf_smbus_stop(struct w9968cf_device*); -static int w9968cf_smbus_write_byte(struct w9968cf_device*, u8 v); -static int w9968cf_smbus_read_byte(struct w9968cf_device*, u8* v); -static int w9968cf_smbus_write_ack(struct w9968cf_device*); -static int w9968cf_smbus_read_ack(struct w9968cf_device*); -static int w9968cf_smbus_refresh_bus(struct w9968cf_device*); -static int w9968cf_i2c_adap_read_byte(struct w9968cf_device* cam, - u16 address, u8* value); -static int w9968cf_i2c_adap_read_byte_data(struct w9968cf_device*, u16 address, - u8 subaddress, u8* value); -static int w9968cf_i2c_adap_write_byte(struct w9968cf_device*, - u16 address, u8 subaddress); -static int w9968cf_i2c_adap_fastwrite_byte_data(struct w9968cf_device*, - u16 address, u8 subaddress, - u8 value); - -/* I2C interface to kernel */ -static int w9968cf_i2c_init(struct w9968cf_device*); -static int w9968cf_i2c_smbus_xfer(struct i2c_adapter*, u16 addr, - unsigned short flags, char read_write, - u8 command, int size, union i2c_smbus_data*); -static u32 w9968cf_i2c_func(struct i2c_adapter*); - -/* Memory management */ -static void* rvmalloc(unsigned long size); -static void rvfree(void *mem, unsigned long size); -static void w9968cf_deallocate_memory(struct w9968cf_device*); -static int w9968cf_allocate_memory(struct w9968cf_device*); - -/* High-level image sensor control functions */ -static int w9968cf_sensor_set_control(struct w9968cf_device*,int cid,int val); -static int w9968cf_sensor_get_control(struct w9968cf_device*,int cid,int *val); -static int w9968cf_sensor_cmd(struct w9968cf_device*, - unsigned int cmd, void *arg); -static int w9968cf_sensor_init(struct w9968cf_device*); -static int w9968cf_sensor_update_settings(struct w9968cf_device*); -static int w9968cf_sensor_get_picture(struct w9968cf_device*); -static int w9968cf_sensor_update_picture(struct w9968cf_device*, - struct video_picture pict); - -/* Other helper functions */ -static void w9968cf_configure_camera(struct w9968cf_device*,struct usb_device*, - enum w9968cf_model_id, - const unsigned short dev_nr); -static void w9968cf_adjust_configuration(struct w9968cf_device*); -static int w9968cf_turn_on_led(struct w9968cf_device*); -static int w9968cf_init_chip(struct w9968cf_device*); -static inline u16 w9968cf_valid_palette(u16 palette); -static inline u16 w9968cf_valid_depth(u16 palette); -static inline u8 w9968cf_need_decompression(u16 palette); -static int w9968cf_set_picture(struct w9968cf_device*, struct video_picture); -static int w9968cf_set_window(struct w9968cf_device*, struct video_window); -static int w9968cf_postprocess_frame(struct w9968cf_device*, - struct w9968cf_frame_t*); -static int w9968cf_adjust_window_size(struct w9968cf_device*, u32 *w, u32 *h); -static void w9968cf_init_framelist(struct w9968cf_device*); -static void w9968cf_push_frame(struct w9968cf_device*, u8 f_num); -static void w9968cf_pop_frame(struct w9968cf_device*,struct w9968cf_frame_t**); -static void w9968cf_release_resources(struct w9968cf_device*); - - - -/**************************************************************************** - * Symbolic names * - ****************************************************************************/ - -/* Used to represent a list of values and their respective symbolic names */ -struct w9968cf_symbolic_list { - const int num; - const char *name; -}; - -/*-------------------------------------------------------------------------- - Returns the name of the matching element in the symbolic_list array. The - end of the list must be marked with an element that has a NULL name. - --------------------------------------------------------------------------*/ -static inline const char * -symbolic(struct w9968cf_symbolic_list list[], const int num) -{ - int i; - - for (i = 0; list[i].name != NULL; i++) - if (list[i].num == num) - return (list[i].name); - - return "Unknown"; -} - -static struct w9968cf_symbolic_list camlist[] = { - { W9968CF_MOD_GENERIC, "W996[87]CF JPEG USB Dual Mode Camera" }, - { W9968CF_MOD_CLVBWGP, "Creative Labs Video Blaster WebCam Go Plus" }, - - /* Other cameras (having the same descriptors as Generic W996[87]CF) */ - { W9968CF_MOD_ADPVDMA, "Aroma Digi Pen VGA Dual Mode ADG-5000" }, - { W9986CF_MOD_AAU, "AVerMedia AVerTV USB" }, - { W9968CF_MOD_CLVBWG, "Creative Labs Video Blaster WebCam Go" }, - { W9968CF_MOD_LL, "Lebon LDC-035A" }, - { W9968CF_MOD_EEEMC, "Ezonics EZ-802 EZMega Cam" }, - { W9968CF_MOD_OOE, "OmniVision OV8610-EDE" }, - { W9968CF_MOD_ODPVDMPC, "OPCOM Digi Pen VGA Dual Mode Pen Camera" }, - { W9968CF_MOD_PDPII, "Pretec Digi Pen-II" }, - { W9968CF_MOD_PDP480, "Pretec DigiPen-480" }, - - { -1, NULL } -}; - -static struct w9968cf_symbolic_list senlist[] = { - { CC_OV76BE, "OV76BE" }, - { CC_OV7610, "OV7610" }, - { CC_OV7620, "OV7620" }, - { CC_OV7620AE, "OV7620AE" }, - { CC_OV6620, "OV6620" }, - { CC_OV6630, "OV6630" }, - { CC_OV6630AE, "OV6630AE" }, - { CC_OV6630AF, "OV6630AF" }, - { -1, NULL } -}; - -/* Video4Linux1 palettes */ -static struct w9968cf_symbolic_list v4l1_plist[] = { - { VIDEO_PALETTE_GREY, "GREY" }, - { VIDEO_PALETTE_HI240, "HI240" }, - { VIDEO_PALETTE_RGB565, "RGB565" }, - { VIDEO_PALETTE_RGB24, "RGB24" }, - { VIDEO_PALETTE_RGB32, "RGB32" }, - { VIDEO_PALETTE_RGB555, "RGB555" }, - { VIDEO_PALETTE_YUV422, "YUV422" }, - { VIDEO_PALETTE_YUYV, "YUYV" }, - { VIDEO_PALETTE_UYVY, "UYVY" }, - { VIDEO_PALETTE_YUV420, "YUV420" }, - { VIDEO_PALETTE_YUV411, "YUV411" }, - { VIDEO_PALETTE_RAW, "RAW" }, - { VIDEO_PALETTE_YUV422P, "YUV422P" }, - { VIDEO_PALETTE_YUV411P, "YUV411P" }, - { VIDEO_PALETTE_YUV420P, "YUV420P" }, - { VIDEO_PALETTE_YUV410P, "YUV410P" }, - { -1, NULL } -}; - -/* Decoder error codes: */ -static struct w9968cf_symbolic_list decoder_errlist[] = { - { W9968CF_DEC_ERR_CORRUPTED_DATA, "Corrupted data" }, - { W9968CF_DEC_ERR_BUF_OVERFLOW, "Buffer overflow" }, - { W9968CF_DEC_ERR_NO_SOI, "SOI marker not found" }, - { W9968CF_DEC_ERR_NO_SOF0, "SOF0 marker not found" }, - { W9968CF_DEC_ERR_NO_SOS, "SOS marker not found" }, - { W9968CF_DEC_ERR_NO_EOI, "EOI marker not found" }, - { -1, NULL } -}; - -/* URB error codes: */ -static struct w9968cf_symbolic_list urb_errlist[] = { - { -ENOMEM, "No memory for allocation of internal structures" }, - { -ENOSPC, "The host controller's bandwidth is already consumed" }, - { -ENOENT, "URB was canceled by unlink_urb" }, - { -EXDEV, "ISO transfer only partially completed" }, - { -EAGAIN, "Too match scheduled for the future" }, - { -ENXIO, "URB already queued" }, - { -EFBIG, "Too much ISO frames requested" }, - { -ENOSR, "Buffer error (overrun)" }, - { -EPIPE, "Specified endpoint is stalled (device not responding)"}, - { -EOVERFLOW, "Babble (too much data)" }, - { -EPROTO, "Bit-stuff error (bad cable?)" }, - { -EILSEQ, "CRC/Timeout" }, - { -ETIME, "Device does not respond to token" }, - { -ETIMEDOUT, "Device does not respond to command" }, - { -1, NULL } -}; - -/**************************************************************************** - * Memory management functions * - ****************************************************************************/ -static void* rvmalloc(unsigned long size) -{ - void* mem; - unsigned long adr; - - size = PAGE_ALIGN(size); - mem = vmalloc_32(size); - if (!mem) - return NULL; - - memset(mem, 0, size); /* Clear the ram out, no junk to the user */ - adr = (unsigned long) mem; - while (size > 0) { - SetPageReserved(vmalloc_to_page((void *)adr)); - adr += PAGE_SIZE; - size -= PAGE_SIZE; - } - - return mem; -} - - -static void rvfree(void* mem, unsigned long size) -{ - unsigned long adr; - - if (!mem) - return; - - adr = (unsigned long) mem; - while ((long) size > 0) { - ClearPageReserved(vmalloc_to_page((void *)adr)); - adr += PAGE_SIZE; - size -= PAGE_SIZE; - } - vfree(mem); -} - - -/*-------------------------------------------------------------------------- - Deallocate previously allocated memory. - --------------------------------------------------------------------------*/ -static void w9968cf_deallocate_memory(struct w9968cf_device* cam) -{ - u8 i; - - /* Free the isochronous transfer buffers */ - for (i = 0; i < W9968CF_URBS; i++) { - kfree(cam->transfer_buffer[i]); - cam->transfer_buffer[i] = NULL; - } - - /* Free temporary frame buffer */ - if (cam->frame_tmp.buffer) { - rvfree(cam->frame_tmp.buffer, cam->frame_tmp.size); - cam->frame_tmp.buffer = NULL; - } - - /* Free helper buffer */ - if (cam->frame_vpp.buffer) { - rvfree(cam->frame_vpp.buffer, cam->frame_vpp.size); - cam->frame_vpp.buffer = NULL; - } - - /* Free video frame buffers */ - if (cam->frame[0].buffer) { - rvfree(cam->frame[0].buffer, cam->nbuffers*cam->frame[0].size); - cam->frame[0].buffer = NULL; - } - - cam->nbuffers = 0; - - DBG(5, "Memory successfully deallocated") -} - - -/*-------------------------------------------------------------------------- - Allocate memory buffers for USB transfers and video frames. - This function is called by open() only. - Return 0 on success, a negative number otherwise. - --------------------------------------------------------------------------*/ -static int w9968cf_allocate_memory(struct w9968cf_device* cam) -{ - const u16 p_size = wMaxPacketSize[cam->altsetting-1]; - void* buff = NULL; - unsigned long hw_bufsize, vpp_bufsize; - u8 i, bpp; - - /* NOTE: Deallocation is done elsewhere in case of error */ - - /* Calculate the max amount of raw data per frame from the device */ - hw_bufsize = cam->maxwidth*cam->maxheight*2; - - /* Calculate the max buf. size needed for post-processing routines */ - bpp = (w9968cf_vpp) ? 4 : 2; - if (cam->upscaling) - vpp_bufsize = max(W9968CF_MAX_WIDTH*W9968CF_MAX_HEIGHT*bpp, - cam->maxwidth*cam->maxheight*bpp); - else - vpp_bufsize = cam->maxwidth*cam->maxheight*bpp; - - /* Allocate memory for the isochronous transfer buffers */ - for (i = 0; i < W9968CF_URBS; i++) { - if (!(cam->transfer_buffer[i] = - kzalloc(W9968CF_ISO_PACKETS*p_size, GFP_KERNEL))) { - DBG(1, "Couldn't allocate memory for the isochronous " - "transfer buffers (%u bytes)", - p_size * W9968CF_ISO_PACKETS) - return -ENOMEM; - } - } - - /* Allocate memory for the temporary frame buffer */ - if (!(cam->frame_tmp.buffer = rvmalloc(hw_bufsize))) { - DBG(1, "Couldn't allocate memory for the temporary " - "video frame buffer (%lu bytes)", hw_bufsize) - return -ENOMEM; - } - cam->frame_tmp.size = hw_bufsize; - cam->frame_tmp.number = -1; - - /* Allocate memory for the helper buffer */ - if (w9968cf_vpp) { - if (!(cam->frame_vpp.buffer = rvmalloc(vpp_bufsize))) { - DBG(1, "Couldn't allocate memory for the helper buffer" - " (%lu bytes)", vpp_bufsize) - return -ENOMEM; - } - cam->frame_vpp.size = vpp_bufsize; - } else - cam->frame_vpp.buffer = NULL; - - /* Allocate memory for video frame buffers */ - cam->nbuffers = cam->max_buffers; - while (cam->nbuffers >= 2) { - if ((buff = rvmalloc(cam->nbuffers * vpp_bufsize))) - break; - else - cam->nbuffers--; - } - - if (!buff) { - DBG(1, "Couldn't allocate memory for the video frame buffers") - cam->nbuffers = 0; - return -ENOMEM; - } - - if (cam->nbuffers != cam->max_buffers) - DBG(2, "Couldn't allocate memory for %u video frame buffers. " - "Only memory for %u buffers has been allocated", - cam->max_buffers, cam->nbuffers) - - for (i = 0; i < cam->nbuffers; i++) { - cam->frame[i].buffer = buff + i*vpp_bufsize; - cam->frame[i].size = vpp_bufsize; - cam->frame[i].number = i; - /* Circular list */ - if (i != cam->nbuffers-1) - cam->frame[i].next = &cam->frame[i+1]; - else - cam->frame[i].next = &cam->frame[0]; - cam->frame[i].status = F_UNUSED; - } - - DBG(5, "Memory successfully allocated") - return 0; -} - - - -/**************************************************************************** - * USB-specific functions * - ****************************************************************************/ - -/*-------------------------------------------------------------------------- - This is an handler function which is called after the URBs are completed. - It collects multiple data packets coming from the camera by putting them - into frame buffers: one or more zero data length data packets are used to - mark the end of a video frame; the first non-zero data packet is the start - of the next video frame; if an error is encountered in a packet, the entire - video frame is discarded and grabbed again. - If there are no requested frames in the FIFO list, packets are collected into - a temporary buffer. - --------------------------------------------------------------------------*/ -static void w9968cf_urb_complete(struct urb *urb) -{ - struct w9968cf_device* cam = (struct w9968cf_device*)urb->context; - struct w9968cf_frame_t** f; - unsigned int len, status; - void* pos; - u8 i; - int err = 0; - - if ((!cam->streaming) || cam->disconnected) { - DBG(4, "Got interrupt, but not streaming") - return; - } - - /* "(*f)" will be used instead of "cam->frame_current" */ - f = &cam->frame_current; - - /* If a frame has been requested and we are grabbing into - the temporary frame, we'll switch to that requested frame */ - if ((*f) == &cam->frame_tmp && *cam->requested_frame) { - if (cam->frame_tmp.status == F_GRABBING) { - w9968cf_pop_frame(cam, &cam->frame_current); - (*f)->status = F_GRABBING; - (*f)->length = cam->frame_tmp.length; - memcpy((*f)->buffer, cam->frame_tmp.buffer, - (*f)->length); - DBG(6, "Switched from temp. frame to frame #%d", - (*f)->number) - } - } - - for (i = 0; i < urb->number_of_packets; i++) { - len = urb->iso_frame_desc[i].actual_length; - status = urb->iso_frame_desc[i].status; - pos = urb->iso_frame_desc[i].offset + urb->transfer_buffer; - - if (status && len != 0) { - DBG(4, "URB failed, error in data packet " - "(error #%u, %s)", - status, symbolic(urb_errlist, status)) - (*f)->status = F_ERROR; - continue; - } - - if (len) { /* start of frame */ - - if ((*f)->status == F_UNUSED) { - (*f)->status = F_GRABBING; - (*f)->length = 0; - } - - /* Buffer overflows shouldn't happen, however...*/ - if ((*f)->length + len > (*f)->size) { - DBG(4, "Buffer overflow: bad data packets") - (*f)->status = F_ERROR; - } - - if ((*f)->status == F_GRABBING) { - memcpy((*f)->buffer + (*f)->length, pos, len); - (*f)->length += len; - } - - } else if ((*f)->status == F_GRABBING) { /* end of frame */ - - DBG(6, "Frame #%d successfully grabbed", (*f)->number) - - if (cam->vpp_flag & VPP_DECOMPRESSION) { - err = w9968cf_vpp->check_headers((*f)->buffer, - (*f)->length); - if (err) { - DBG(4, "Skip corrupted frame: %s", - symbolic(decoder_errlist, err)) - (*f)->status = F_UNUSED; - continue; /* grab this frame again */ - } - } - - (*f)->status = F_READY; - (*f)->queued = 0; - - /* Take a pointer to the new frame from the FIFO list. - If the list is empty,we'll use the temporary frame*/ - if (*cam->requested_frame) - w9968cf_pop_frame(cam, &cam->frame_current); - else { - cam->frame_current = &cam->frame_tmp; - (*f)->status = F_UNUSED; - } - - } else if ((*f)->status == F_ERROR) - (*f)->status = F_UNUSED; /* grab it again */ - - PDBGG("Frame length %lu | pack.#%u | pack.len. %u | state %d", - (unsigned long)(*f)->length, i, len, (*f)->status) - - } /* end for */ - - /* Resubmit this URB */ - urb->dev = cam->usbdev; - urb->status = 0; - spin_lock(&cam->urb_lock); - if (cam->streaming) - if ((err = usb_submit_urb(urb, GFP_ATOMIC))) { - cam->misconfigured = 1; - DBG(1, "Couldn't resubmit the URB: error %d, %s", - err, symbolic(urb_errlist, err)) - } - spin_unlock(&cam->urb_lock); - - /* Wake up the user process */ - wake_up_interruptible(&cam->wait_queue); -} - - -/*--------------------------------------------------------------------------- - Setup the URB structures for the isochronous transfer. - Submit the URBs so that the data transfer begins. - Return 0 on success, a negative number otherwise. - ---------------------------------------------------------------------------*/ -static int w9968cf_start_transfer(struct w9968cf_device* cam) -{ - struct usb_device *udev = cam->usbdev; - struct urb* urb; - const u16 p_size = wMaxPacketSize[cam->altsetting-1]; - u16 w, h, d; - int vidcapt; - u32 t_size; - int err = 0; - s8 i, j; - - for (i = 0; i < W9968CF_URBS; i++) { - urb = usb_alloc_urb(W9968CF_ISO_PACKETS, GFP_KERNEL); - if (!urb) { - for (j = 0; j < i; j++) - usb_free_urb(cam->urb[j]); - DBG(1, "Couldn't allocate the URB structures") - return -ENOMEM; - } - - cam->urb[i] = urb; - urb->dev = udev; - urb->context = (void*)cam; - urb->pipe = usb_rcvisocpipe(udev, 1); - urb->transfer_flags = URB_ISO_ASAP; - urb->number_of_packets = W9968CF_ISO_PACKETS; - urb->complete = w9968cf_urb_complete; - urb->transfer_buffer = cam->transfer_buffer[i]; - urb->transfer_buffer_length = p_size*W9968CF_ISO_PACKETS; - urb->interval = 1; - for (j = 0; j < W9968CF_ISO_PACKETS; j++) { - urb->iso_frame_desc[j].offset = p_size*j; - urb->iso_frame_desc[j].length = p_size; - } - } - - /* Transfer size per frame, in WORD ! */ - d = cam->hw_depth; - w = cam->hw_width; - h = cam->hw_height; - - t_size = (w*h*d)/16; - - err = w9968cf_write_reg(cam, 0xbf17, 0x00); /* reset everything */ - err += w9968cf_write_reg(cam, 0xbf10, 0x00); /* normal operation */ - - /* Transfer size */ - err += w9968cf_write_reg(cam, t_size & 0xffff, 0x3d); /* low bits */ - err += w9968cf_write_reg(cam, t_size >> 16, 0x3e); /* high bits */ - - if (cam->vpp_flag & VPP_DECOMPRESSION) - err += w9968cf_upload_quantizationtables(cam); - - vidcapt = w9968cf_read_reg(cam, 0x16); /* read picture settings */ - err += w9968cf_write_reg(cam, vidcapt|0x8000, 0x16); /* capt. enable */ - - err += usb_set_interface(udev, 0, cam->altsetting); - err += w9968cf_write_reg(cam, 0x8a05, 0x3c); /* USB FIFO enable */ - - if (err || (vidcapt < 0)) { - for (i = 0; i < W9968CF_URBS; i++) - usb_free_urb(cam->urb[i]); - DBG(1, "Couldn't tell the camera to start the data transfer") - return err; - } - - w9968cf_init_framelist(cam); - - /* Begin to grab into the temporary buffer */ - cam->frame_tmp.status = F_UNUSED; - cam->frame_tmp.queued = 0; - cam->frame_current = &cam->frame_tmp; - - if (!(cam->vpp_flag & VPP_DECOMPRESSION)) - DBG(5, "Isochronous transfer size: %lu bytes/frame", - (unsigned long)t_size*2) - - DBG(5, "Starting the isochronous transfer...") - - cam->streaming = 1; - - /* Submit the URBs */ - for (i = 0; i < W9968CF_URBS; i++) { - err = usb_submit_urb(cam->urb[i], GFP_KERNEL); - if (err) { - cam->streaming = 0; - for (j = i-1; j >= 0; j--) { - usb_kill_urb(cam->urb[j]); - usb_free_urb(cam->urb[j]); - } - DBG(1, "Couldn't send a transfer request to the " - "USB core (error #%d, %s)", err, - symbolic(urb_errlist, err)) - return err; - } - } - - return 0; -} - - -/*-------------------------------------------------------------------------- - Stop the isochronous transfer and set alternate setting to 0 (0Mb/s). - Return 0 on success, a negative number otherwise. - --------------------------------------------------------------------------*/ -static int w9968cf_stop_transfer(struct w9968cf_device* cam) -{ - struct usb_device *udev = cam->usbdev; - unsigned long lock_flags; - int err = 0; - s8 i; - - if (!cam->streaming) - return 0; - - /* This avoids race conditions with usb_submit_urb() - in the URB completition handler */ - spin_lock_irqsave(&cam->urb_lock, lock_flags); - cam->streaming = 0; - spin_unlock_irqrestore(&cam->urb_lock, lock_flags); - - for (i = W9968CF_URBS-1; i >= 0; i--) - if (cam->urb[i]) { - usb_kill_urb(cam->urb[i]); - usb_free_urb(cam->urb[i]); - cam->urb[i] = NULL; - } - - if (cam->disconnected) - goto exit; - - err = w9968cf_write_reg(cam, 0x0a05, 0x3c); /* stop USB transfer */ - err += usb_set_interface(udev, 0, 0); /* 0 Mb/s */ - err += w9968cf_write_reg(cam, 0x0000, 0x39); /* disable JPEG encoder */ - err += w9968cf_write_reg(cam, 0x0000, 0x16); /* stop video capture */ - - if (err) { - DBG(2, "Failed to tell the camera to stop the isochronous " - "transfer. However this is not a critical error.") - return -EIO; - } - -exit: - DBG(5, "Isochronous transfer stopped") - return 0; -} - - -/*-------------------------------------------------------------------------- - Write a W9968CF register. - Return 0 on success, -1 otherwise. - --------------------------------------------------------------------------*/ -static int w9968cf_write_reg(struct w9968cf_device* cam, u16 value, u16 index) -{ - struct usb_device* udev = cam->usbdev; - int res; - - res = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), 0, - USB_TYPE_VENDOR | USB_DIR_OUT | USB_RECIP_DEVICE, - value, index, NULL, 0, W9968CF_USB_CTRL_TIMEOUT); - - if (res < 0) - DBG(4, "Failed to write a register " - "(value 0x%04X, index 0x%02X, error #%d, %s)", - value, index, res, symbolic(urb_errlist, res)) - - return (res >= 0) ? 0 : -1; -} - - -/*-------------------------------------------------------------------------- - Read a W9968CF register. - Return the register value on success, -1 otherwise. - --------------------------------------------------------------------------*/ -static int w9968cf_read_reg(struct w9968cf_device* cam, u16 index) -{ - struct usb_device* udev = cam->usbdev; - u16* buff = cam->control_buffer; - int res; - - res = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0), 1, - USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE, - 0, index, buff, 2, W9968CF_USB_CTRL_TIMEOUT); - - if (res < 0) - DBG(4, "Failed to read a register " - "(index 0x%02X, error #%d, %s)", - index, res, symbolic(urb_errlist, res)) - - return (res >= 0) ? (int)(*buff) : -1; -} - - -/*-------------------------------------------------------------------------- - Write 64-bit data to the fast serial bus registers. - Return 0 on success, -1 otherwise. - --------------------------------------------------------------------------*/ -static int w9968cf_write_fsb(struct w9968cf_device* cam, u16* data) -{ - struct usb_device* udev = cam->usbdev; - u16 value; - int res; - - value = *data++; - - res = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), 0, - USB_TYPE_VENDOR | USB_DIR_OUT | USB_RECIP_DEVICE, - value, 0x06, data, 6, W9968CF_USB_CTRL_TIMEOUT); - - if (res < 0) - DBG(4, "Failed to write the FSB registers " - "(error #%d, %s)", res, symbolic(urb_errlist, res)) - - return (res >= 0) ? 0 : -1; -} - - -/*-------------------------------------------------------------------------- - Write data to the serial bus control register. - Return 0 on success, a negative number otherwise. - --------------------------------------------------------------------------*/ -static int w9968cf_write_sb(struct w9968cf_device* cam, u16 value) -{ - int err = 0; - - err = w9968cf_write_reg(cam, value, 0x01); - udelay(W9968CF_I2C_BUS_DELAY); - - return err; -} - - -/*-------------------------------------------------------------------------- - Read data from the serial bus control register. - Return 0 on success, a negative number otherwise. - --------------------------------------------------------------------------*/ -static int w9968cf_read_sb(struct w9968cf_device* cam) -{ - int v = 0; - - v = w9968cf_read_reg(cam, 0x01); - udelay(W9968CF_I2C_BUS_DELAY); - - return v; -} - - -/*-------------------------------------------------------------------------- - Upload quantization tables for the JPEG compression. - This function is called by w9968cf_start_transfer(). - Return 0 on success, a negative number otherwise. - --------------------------------------------------------------------------*/ -static int w9968cf_upload_quantizationtables(struct w9968cf_device* cam) -{ - u16 a, b; - int err = 0, i, j; - - err += w9968cf_write_reg(cam, 0x0010, 0x39); /* JPEG clock enable */ - - for (i = 0, j = 0; i < 32; i++, j += 2) { - a = Y_QUANTABLE[j] | ((unsigned)(Y_QUANTABLE[j+1]) << 8); - b = UV_QUANTABLE[j] | ((unsigned)(UV_QUANTABLE[j+1]) << 8); - err += w9968cf_write_reg(cam, a, 0x40+i); - err += w9968cf_write_reg(cam, b, 0x60+i); - } - err += w9968cf_write_reg(cam, 0x0012, 0x39); /* JPEG encoder enable */ - - return err; -} - - - -/**************************************************************************** - * Low-level I2C I/O functions. * - * The adapter supports the following I2C transfer functions: * - * i2c_adap_fastwrite_byte_data() (at 400 kHz bit frequency only) * - * i2c_adap_read_byte_data() * - * i2c_adap_read_byte() * - ****************************************************************************/ - -static int w9968cf_smbus_start(struct w9968cf_device* cam) -{ - int err = 0; - - err += w9968cf_write_sb(cam, 0x0011); /* SDE=1, SDA=0, SCL=1 */ - err += w9968cf_write_sb(cam, 0x0010); /* SDE=1, SDA=0, SCL=0 */ - - return err; -} - - -static int w9968cf_smbus_stop(struct w9968cf_device* cam) -{ - int err = 0; - - err += w9968cf_write_sb(cam, 0x0011); /* SDE=1, SDA=0, SCL=1 */ - err += w9968cf_write_sb(cam, 0x0013); /* SDE=1, SDA=1, SCL=1 */ - - return err; -} - - -static int w9968cf_smbus_write_byte(struct w9968cf_device* cam, u8 v) -{ - u8 bit; - int err = 0, sda; - - for (bit = 0 ; bit < 8 ; bit++) { - sda = (v & 0x80) ? 2 : 0; - v <<= 1; - /* SDE=1, SDA=sda, SCL=0 */ - err += w9968cf_write_sb(cam, 0x10 | sda); - /* SDE=1, SDA=sda, SCL=1 */ - err += w9968cf_write_sb(cam, 0x11 | sda); - /* SDE=1, SDA=sda, SCL=0 */ - err += w9968cf_write_sb(cam, 0x10 | sda); - } - - return err; -} - - -static int w9968cf_smbus_read_byte(struct w9968cf_device* cam, u8* v) -{ - u8 bit; - int err = 0; - - *v = 0; - for (bit = 0 ; bit < 8 ; bit++) { - *v <<= 1; - err += w9968cf_write_sb(cam, 0x0013); - *v |= (w9968cf_read_sb(cam) & 0x0008) ? 1 : 0; - err += w9968cf_write_sb(cam, 0x0012); - } - - return err; -} - - -static int w9968cf_smbus_write_ack(struct w9968cf_device* cam) -{ - int err = 0; - - err += w9968cf_write_sb(cam, 0x0010); /* SDE=1, SDA=0, SCL=0 */ - err += w9968cf_write_sb(cam, 0x0011); /* SDE=1, SDA=0, SCL=1 */ - err += w9968cf_write_sb(cam, 0x0010); /* SDE=1, SDA=0, SCL=0 */ - - return err; -} - - -static int w9968cf_smbus_read_ack(struct w9968cf_device* cam) -{ - int err = 0, sda; - - err += w9968cf_write_sb(cam, 0x0013); /* SDE=1, SDA=1, SCL=1 */ - sda = (w9968cf_read_sb(cam) & 0x08) ? 1 : 0; /* sda = SDA */ - err += w9968cf_write_sb(cam, 0x0012); /* SDE=1, SDA=1, SCL=0 */ - if (sda < 0) - err += sda; - if (sda == 1) { - DBG(6, "Couldn't receive the ACK") - err += -1; - } - - return err; -} - - -/* This seems to refresh the communication through the serial bus */ -static int w9968cf_smbus_refresh_bus(struct w9968cf_device* cam) -{ - int err = 0, j; - - for (j = 1; j <= 10; j++) { - err = w9968cf_write_reg(cam, 0x0020, 0x01); - err += w9968cf_write_reg(cam, 0x0000, 0x01); - if (err) - break; - } - - return err; -} - - -/* SMBus protocol: S Addr Wr [A] Subaddr [A] Value [A] P */ -static int -w9968cf_i2c_adap_fastwrite_byte_data(struct w9968cf_device* cam, - u16 address, u8 subaddress,u8 value) -{ - u16* data = cam->data_buffer; - int err = 0; - - err += w9968cf_smbus_refresh_bus(cam); - - /* Enable SBUS outputs */ - err += w9968cf_write_sb(cam, 0x0020); - - data[0] = 0x082f | ((address & 0x80) ? 0x1500 : 0x0); - data[0] |= (address & 0x40) ? 0x4000 : 0x0; - data[1] = 0x2082 | ((address & 0x40) ? 0x0005 : 0x0); - data[1] |= (address & 0x20) ? 0x0150 : 0x0; - data[1] |= (address & 0x10) ? 0x5400 : 0x0; - data[2] = 0x8208 | ((address & 0x08) ? 0x0015 : 0x0); - data[2] |= (address & 0x04) ? 0x0540 : 0x0; - data[2] |= (address & 0x02) ? 0x5000 : 0x0; - data[3] = 0x1d20 | ((address & 0x02) ? 0x0001 : 0x0); - data[3] |= (address & 0x01) ? 0x0054 : 0x0; - - err += w9968cf_write_fsb(cam, data); - - data[0] = 0x8208 | ((subaddress & 0x80) ? 0x0015 : 0x0); - data[0] |= (subaddress & 0x40) ? 0x0540 : 0x0; - data[0] |= (subaddress & 0x20) ? 0x5000 : 0x0; - data[1] = 0x0820 | ((subaddress & 0x20) ? 0x0001 : 0x0); - data[1] |= (subaddress & 0x10) ? 0x0054 : 0x0; - data[1] |= (subaddress & 0x08) ? 0x1500 : 0x0; - data[1] |= (subaddress & 0x04) ? 0x4000 : 0x0; - data[2] = 0x2082 | ((subaddress & 0x04) ? 0x0005 : 0x0); - data[2] |= (subaddress & 0x02) ? 0x0150 : 0x0; - data[2] |= (subaddress & 0x01) ? 0x5400 : 0x0; - data[3] = 0x001d; - - err += w9968cf_write_fsb(cam, data); - - data[0] = 0x8208 | ((value & 0x80) ? 0x0015 : 0x0); - data[0] |= (value & 0x40) ? 0x0540 : 0x0; - data[0] |= (value & 0x20) ? 0x5000 : 0x0; - data[1] = 0x0820 | ((value & 0x20) ? 0x0001 : 0x0); - data[1] |= (value & 0x10) ? 0x0054 : 0x0; - data[1] |= (value & 0x08) ? 0x1500 : 0x0; - data[1] |= (value & 0x04) ? 0x4000 : 0x0; - data[2] = 0x2082 | ((value & 0x04) ? 0x0005 : 0x0); - data[2] |= (value & 0x02) ? 0x0150 : 0x0; - data[2] |= (value & 0x01) ? 0x5400 : 0x0; - data[3] = 0xfe1d; - - err += w9968cf_write_fsb(cam, data); - - /* Disable SBUS outputs */ - err += w9968cf_write_sb(cam, 0x0000); - - if (!err) - DBG(5, "I2C write byte data done, addr.0x%04X, subaddr.0x%02X " - "value 0x%02X", address, subaddress, value) - else - DBG(5, "I2C write byte data failed, addr.0x%04X, " - "subaddr.0x%02X, value 0x%02X", - address, subaddress, value) - - return err; -} - - -/* SMBus protocol: S Addr Wr [A] Subaddr [A] P S Addr+1 Rd [A] [Value] NA P */ -static int -w9968cf_i2c_adap_read_byte_data(struct w9968cf_device* cam, - u16 address, u8 subaddress, - u8* value) -{ - int err = 0; - - /* Serial data enable */ - err += w9968cf_write_sb(cam, 0x0013); /* don't change ! */ - - err += w9968cf_smbus_start(cam); - err += w9968cf_smbus_write_byte(cam, address); - err += w9968cf_smbus_read_ack(cam); - err += w9968cf_smbus_write_byte(cam, subaddress); - err += w9968cf_smbus_read_ack(cam); - err += w9968cf_smbus_stop(cam); - err += w9968cf_smbus_start(cam); - err += w9968cf_smbus_write_byte(cam, address + 1); - err += w9968cf_smbus_read_ack(cam); - err += w9968cf_smbus_read_byte(cam, value); - err += w9968cf_smbus_write_ack(cam); - err += w9968cf_smbus_stop(cam); - - /* Serial data disable */ - err += w9968cf_write_sb(cam, 0x0000); - - if (!err) - DBG(5, "I2C read byte data done, addr.0x%04X, " - "subaddr.0x%02X, value 0x%02X", - address, subaddress, *value) - else - DBG(5, "I2C read byte data failed, addr.0x%04X, " - "subaddr.0x%02X, wrong value 0x%02X", - address, subaddress, *value) - - return err; -} - - -/* SMBus protocol: S Addr+1 Rd [A] [Value] NA P */ -static int -w9968cf_i2c_adap_read_byte(struct w9968cf_device* cam, - u16 address, u8* value) -{ - int err = 0; - - /* Serial data enable */ - err += w9968cf_write_sb(cam, 0x0013); - - err += w9968cf_smbus_start(cam); - err += w9968cf_smbus_write_byte(cam, address + 1); - err += w9968cf_smbus_read_ack(cam); - err += w9968cf_smbus_read_byte(cam, value); - err += w9968cf_smbus_write_ack(cam); - err += w9968cf_smbus_stop(cam); - - /* Serial data disable */ - err += w9968cf_write_sb(cam, 0x0000); - - if (!err) - DBG(5, "I2C read byte done, addr.0x%04X, " - "value 0x%02X", address, *value) - else - DBG(5, "I2C read byte failed, addr.0x%04X, " - "wrong value 0x%02X", address, *value) - - return err; -} - - -/* SMBus protocol: S Addr Wr [A] Value [A] P */ -static int -w9968cf_i2c_adap_write_byte(struct w9968cf_device* cam, - u16 address, u8 value) -{ - DBG(4, "i2c_write_byte() is an unsupported transfer mode") - return -EINVAL; -} - - - -/**************************************************************************** - * I2C interface to kernel * - ****************************************************************************/ - -static int -w9968cf_i2c_smbus_xfer(struct i2c_adapter *adapter, u16 addr, - unsigned short flags, char read_write, u8 command, - int size, union i2c_smbus_data *data) -{ - struct v4l2_device *v4l2_dev = i2c_get_adapdata(adapter); - struct w9968cf_device *cam = to_cam(v4l2_dev); - u8 i; - int err = 0; - - if (size == I2C_SMBUS_BYTE) { - /* Why addr <<= 1? See OVXXX0_SID defines in ovcamchip.h */ - addr <<= 1; - - if (read_write == I2C_SMBUS_WRITE) - err = w9968cf_i2c_adap_write_byte(cam, addr, command); - else if (read_write == I2C_SMBUS_READ) - for (i = 1; i <= W9968CF_I2C_RW_RETRIES; i++) { - err = w9968cf_i2c_adap_read_byte(cam, addr, - &data->byte); - if (err) { - if (w9968cf_smbus_refresh_bus(cam)) { - err = -EIO; - break; - } - } else - break; - } - } else if (size == I2C_SMBUS_BYTE_DATA) { - addr <<= 1; - - if (read_write == I2C_SMBUS_WRITE) - err = w9968cf_i2c_adap_fastwrite_byte_data(cam, addr, - command, data->byte); - else if (read_write == I2C_SMBUS_READ) { - for (i = 1; i <= W9968CF_I2C_RW_RETRIES; i++) { - err = w9968cf_i2c_adap_read_byte_data(cam,addr, - command, &data->byte); - if (err) { - if (w9968cf_smbus_refresh_bus(cam)) { - err = -EIO; - break; - } - } else - break; - } - - } else - return -EINVAL; - - } else { - DBG(4, "Unsupported I2C transfer mode (%d)", size) - return -EINVAL; - } - return err; -} - - -static u32 w9968cf_i2c_func(struct i2c_adapter* adap) -{ - return I2C_FUNC_SMBUS_READ_BYTE | - I2C_FUNC_SMBUS_READ_BYTE_DATA | - I2C_FUNC_SMBUS_WRITE_BYTE_DATA; -} - - -static int w9968cf_i2c_init(struct w9968cf_device* cam) -{ - int err = 0; - - static struct i2c_algorithm algo = { - .smbus_xfer = w9968cf_i2c_smbus_xfer, - .functionality = w9968cf_i2c_func, - }; - - static struct i2c_adapter adap = { - .owner = THIS_MODULE, - .algo = &algo, - }; - - memcpy(&cam->i2c_adapter, &adap, sizeof(struct i2c_adapter)); - strcpy(cam->i2c_adapter.name, "w9968cf"); - cam->i2c_adapter.dev.parent = &cam->usbdev->dev; - i2c_set_adapdata(&cam->i2c_adapter, &cam->v4l2_dev); - - DBG(6, "Registering I2C adapter with kernel...") - - err = i2c_add_adapter(&cam->i2c_adapter); - if (err) - DBG(1, "Failed to register the I2C adapter") - else - DBG(5, "I2C adapter registered") - - return err; -} - - - -/**************************************************************************** - * Helper functions * - ****************************************************************************/ - -/*-------------------------------------------------------------------------- - Turn on the LED on some webcams. A beep should be heard too. - Return 0 on success, a negative number otherwise. - --------------------------------------------------------------------------*/ -static int w9968cf_turn_on_led(struct w9968cf_device* cam) -{ - int err = 0; - - err += w9968cf_write_reg(cam, 0xff00, 0x00); /* power-down */ - err += w9968cf_write_reg(cam, 0xbf17, 0x00); /* reset everything */ - err += w9968cf_write_reg(cam, 0xbf10, 0x00); /* normal operation */ - err += w9968cf_write_reg(cam, 0x0010, 0x01); /* serial bus, SDS high */ - err += w9968cf_write_reg(cam, 0x0000, 0x01); /* serial bus, SDS low */ - err += w9968cf_write_reg(cam, 0x0010, 0x01); /* ..high 'beep-beep' */ - - if (err) - DBG(2, "Couldn't turn on the LED") - - DBG(5, "LED turned on") - - return err; -} - - -/*-------------------------------------------------------------------------- - Write some registers for the device initialization. - This function is called once on open(). - Return 0 on success, a negative number otherwise. - --------------------------------------------------------------------------*/ -static int w9968cf_init_chip(struct w9968cf_device* cam) -{ - unsigned long hw_bufsize = cam->maxwidth*cam->maxheight*2, - y0 = 0x0000, - u0 = y0 + hw_bufsize/2, - v0 = u0 + hw_bufsize/4, - y1 = v0 + hw_bufsize/4, - u1 = y1 + hw_bufsize/2, - v1 = u1 + hw_bufsize/4; - int err = 0; - - err += w9968cf_write_reg(cam, 0xff00, 0x00); /* power off */ - err += w9968cf_write_reg(cam, 0xbf10, 0x00); /* power on */ - - err += w9968cf_write_reg(cam, 0x405d, 0x03); /* DRAM timings */ - err += w9968cf_write_reg(cam, 0x0030, 0x04); /* SDRAM timings */ - - err += w9968cf_write_reg(cam, y0 & 0xffff, 0x20); /* Y buf.0, low */ - err += w9968cf_write_reg(cam, y0 >> 16, 0x21); /* Y buf.0, high */ - err += w9968cf_write_reg(cam, u0 & 0xffff, 0x24); /* U buf.0, low */ - err += w9968cf_write_reg(cam, u0 >> 16, 0x25); /* U buf.0, high */ - err += w9968cf_write_reg(cam, v0 & 0xffff, 0x28); /* V buf.0, low */ - err += w9968cf_write_reg(cam, v0 >> 16, 0x29); /* V buf.0, high */ - - err += w9968cf_write_reg(cam, y1 & 0xffff, 0x22); /* Y buf.1, low */ - err += w9968cf_write_reg(cam, y1 >> 16, 0x23); /* Y buf.1, high */ - err += w9968cf_write_reg(cam, u1 & 0xffff, 0x26); /* U buf.1, low */ - err += w9968cf_write_reg(cam, u1 >> 16, 0x27); /* U buf.1, high */ - err += w9968cf_write_reg(cam, v1 & 0xffff, 0x2a); /* V buf.1, low */ - err += w9968cf_write_reg(cam, v1 >> 16, 0x2b); /* V buf.1, high */ - - err += w9968cf_write_reg(cam, y1 & 0xffff, 0x32); /* JPEG buf 0 low */ - err += w9968cf_write_reg(cam, y1 >> 16, 0x33); /* JPEG buf 0 high */ - - err += w9968cf_write_reg(cam, y1 & 0xffff, 0x34); /* JPEG buf 1 low */ - err += w9968cf_write_reg(cam, y1 >> 16, 0x35); /* JPEG bug 1 high */ - - err += w9968cf_write_reg(cam, 0x0000, 0x36);/* JPEG restart interval */ - err += w9968cf_write_reg(cam, 0x0804, 0x37);/*JPEG VLE FIFO threshold*/ - err += w9968cf_write_reg(cam, 0x0000, 0x38);/* disable hw up-scaling */ - err += w9968cf_write_reg(cam, 0x0000, 0x3f); /* JPEG/MCTL test data */ - - err += w9968cf_set_picture(cam, cam->picture); /* this before */ - err += w9968cf_set_window(cam, cam->window); - - if (err) - DBG(1, "Chip initialization failed") - else - DBG(5, "Chip successfully initialized") - - return err; -} - - -/*-------------------------------------------------------------------------- - Return non-zero if the palette is supported, 0 otherwise. - --------------------------------------------------------------------------*/ -static inline u16 w9968cf_valid_palette(u16 palette) -{ - u8 i = 0; - while (w9968cf_formatlist[i].palette != 0) { - if (palette == w9968cf_formatlist[i].palette) - return palette; - i++; - } - return 0; -} - - -/*-------------------------------------------------------------------------- - Return the depth corresponding to the given palette. - Palette _must_ be supported ! - --------------------------------------------------------------------------*/ -static inline u16 w9968cf_valid_depth(u16 palette) -{ - u8 i=0; - while (w9968cf_formatlist[i].palette != palette) - i++; - - return w9968cf_formatlist[i].depth; -} - - -/*-------------------------------------------------------------------------- - Return non-zero if the format requires decompression, 0 otherwise. - --------------------------------------------------------------------------*/ -static inline u8 w9968cf_need_decompression(u16 palette) -{ - u8 i = 0; - while (w9968cf_formatlist[i].palette != 0) { - if (palette == w9968cf_formatlist[i].palette) - return w9968cf_formatlist[i].compression; - i++; - } - return 0; -} - - -/*-------------------------------------------------------------------------- - Change the picture settings of the camera. - Return 0 on success, a negative number otherwise. - --------------------------------------------------------------------------*/ -static int -w9968cf_set_picture(struct w9968cf_device* cam, struct video_picture pict) -{ - u16 fmt, hw_depth, hw_palette, reg_v = 0x0000; - int err = 0; - - /* Make sure we are using a valid depth */ - pict.depth = w9968cf_valid_depth(pict.palette); - - fmt = pict.palette; - - hw_depth = pict.depth; /* depth used by the winbond chip */ - hw_palette = pict.palette; /* palette used by the winbond chip */ - - /* VS & HS polarities */ - reg_v = (cam->vs_polarity << 12) | (cam->hs_polarity << 11); - - switch (fmt) - { - case VIDEO_PALETTE_UYVY: - reg_v |= 0x0000; - cam->vpp_flag = VPP_NONE; - break; - case VIDEO_PALETTE_YUV422P: - reg_v |= 0x0002; - cam->vpp_flag = VPP_DECOMPRESSION; - break; - case VIDEO_PALETTE_YUV420: - case VIDEO_PALETTE_YUV420P: - reg_v |= 0x0003; - cam->vpp_flag = VPP_DECOMPRESSION; - break; - case VIDEO_PALETTE_YUYV: - case VIDEO_PALETTE_YUV422: - reg_v |= 0x0000; - cam->vpp_flag = VPP_SWAP_YUV_BYTES; - hw_palette = VIDEO_PALETTE_UYVY; - break; - /* Original video is used instead of RGBX palettes. - Software conversion later. */ - case VIDEO_PALETTE_GREY: - case VIDEO_PALETTE_RGB555: - case VIDEO_PALETTE_RGB565: - case VIDEO_PALETTE_RGB24: - case VIDEO_PALETTE_RGB32: - reg_v |= 0x0000; /* UYVY 16 bit is used */ - hw_depth = 16; - hw_palette = VIDEO_PALETTE_UYVY; - cam->vpp_flag = VPP_UYVY_TO_RGBX; - break; - } - - /* NOTE: due to memory issues, it is better to disable the hardware - double buffering during compression */ - if (cam->double_buffer && !(cam->vpp_flag & VPP_DECOMPRESSION)) - reg_v |= 0x0080; - - if (cam->clamping) - reg_v |= 0x0020; - - if (cam->filter_type == 1) - reg_v |= 0x0008; - else if (cam->filter_type == 2) - reg_v |= 0x000c; - - if ((err = w9968cf_write_reg(cam, reg_v, 0x16))) - goto error; - - if ((err = w9968cf_sensor_update_picture(cam, pict))) - goto error; - - /* If all went well, update the device data structure */ - memcpy(&cam->picture, &pict, sizeof(pict)); - cam->hw_depth = hw_depth; - cam->hw_palette = hw_palette; - - /* Settings changed, so we clear the frame buffers */ - memset(cam->frame[0].buffer, 0, cam->nbuffers*cam->frame[0].size); - - DBG(4, "Palette is %s, depth is %u bpp", - symbolic(v4l1_plist, pict.palette), pict.depth) - - return 0; - -error: - DBG(1, "Failed to change picture settings") - return err; -} - - -/*-------------------------------------------------------------------------- - Change the capture area size of the camera. - This function _must_ be called _after_ w9968cf_set_picture(). - Return 0 on success, a negative number otherwise. - --------------------------------------------------------------------------*/ -static int -w9968cf_set_window(struct w9968cf_device* cam, struct video_window win) -{ - u16 x, y, w, h, scx, scy, cw, ch, ax, ay; - unsigned long fw, fh; - struct ovcamchip_window s_win; - int err = 0; - - /* Work around to avoid FP arithmetics */ - #define SC(x) ((x) << 10) - #define UNSC(x) ((x) >> 10) - - /* Make sure we are using a supported resolution */ - if ((err = w9968cf_adjust_window_size(cam, &win.width, &win.height))) - goto error; - - /* Scaling factors */ - fw = SC(win.width) / cam->maxwidth; - fh = SC(win.height) / cam->maxheight; - - /* Set up the width and height values used by the chip */ - if ((win.width > cam->maxwidth) || (win.height > cam->maxheight)) { - cam->vpp_flag |= VPP_UPSCALE; - /* Calculate largest w,h mantaining the same w/h ratio */ - w = (fw >= fh) ? cam->maxwidth : SC(win.width)/fh; - h = (fw >= fh) ? SC(win.height)/fw : cam->maxheight; - if (w < cam->minwidth) /* just in case */ - w = cam->minwidth; - if (h < cam->minheight) /* just in case */ - h = cam->minheight; - } else { - cam->vpp_flag &= ~VPP_UPSCALE; - w = win.width; - h = win.height; - } - - /* x,y offsets of the cropped area */ - scx = cam->start_cropx; - scy = cam->start_cropy; - - /* Calculate cropped area manteining the right w/h ratio */ - if (cam->largeview && !(cam->vpp_flag & VPP_UPSCALE)) { - cw = (fw >= fh) ? cam->maxwidth : SC(win.width)/fh; - ch = (fw >= fh) ? SC(win.height)/fw : cam->maxheight; - } else { - cw = w; - ch = h; - } - - /* Setup the window of the sensor */ - s_win.format = VIDEO_PALETTE_UYVY; - s_win.width = cam->maxwidth; - s_win.height = cam->maxheight; - s_win.quarter = 0; /* full progressive video */ - - /* Center it */ - s_win.x = (s_win.width - cw) / 2; - s_win.y = (s_win.height - ch) / 2; - - /* Clock divisor */ - if (cam->clockdiv >= 0) - s_win.clockdiv = cam->clockdiv; /* manual override */ - else - switch (cam->sensor) { - case CC_OV6620: - s_win.clockdiv = 0; - break; - case CC_OV6630: - s_win.clockdiv = 0; - break; - case CC_OV76BE: - case CC_OV7610: - case CC_OV7620: - s_win.clockdiv = 0; - break; - default: - s_win.clockdiv = W9968CF_DEF_CLOCKDIVISOR; - } - - /* We have to scale win.x and win.y offsets */ - if ( (cam->largeview && !(cam->vpp_flag & VPP_UPSCALE)) - || (cam->vpp_flag & VPP_UPSCALE) ) { - ax = SC(win.x)/fw; - ay = SC(win.y)/fh; - } else { - ax = win.x; - ay = win.y; - } - - if ((ax + cw) > cam->maxwidth) - ax = cam->maxwidth - cw; - - if ((ay + ch) > cam->maxheight) - ay = cam->maxheight - ch; - - /* Adjust win.x, win.y */ - if ( (cam->largeview && !(cam->vpp_flag & VPP_UPSCALE)) - || (cam->vpp_flag & VPP_UPSCALE) ) { - win.x = UNSC(ax*fw); - win.y = UNSC(ay*fh); - } else { - win.x = ax; - win.y = ay; - } - - /* Offsets used by the chip */ - x = ax + s_win.x; - y = ay + s_win.y; - - /* Go ! */ - if ((err = w9968cf_sensor_cmd(cam, OVCAMCHIP_CMD_S_MODE, &s_win))) - goto error; - - err += w9968cf_write_reg(cam, scx + x, 0x10); - err += w9968cf_write_reg(cam, scy + y, 0x11); - err += w9968cf_write_reg(cam, scx + x + cw, 0x12); - err += w9968cf_write_reg(cam, scy + y + ch, 0x13); - err += w9968cf_write_reg(cam, w, 0x14); - err += w9968cf_write_reg(cam, h, 0x15); - - /* JPEG width & height */ - err += w9968cf_write_reg(cam, w, 0x30); - err += w9968cf_write_reg(cam, h, 0x31); - - /* Y & UV frame buffer strides (in WORD) */ - if (cam->vpp_flag & VPP_DECOMPRESSION) { - err += w9968cf_write_reg(cam, w/2, 0x2c); - err += w9968cf_write_reg(cam, w/4, 0x2d); - } else - err += w9968cf_write_reg(cam, w, 0x2c); - - if (err) - goto error; - - /* If all went well, update the device data structure */ - memcpy(&cam->window, &win, sizeof(win)); - cam->hw_width = w; - cam->hw_height = h; - - /* Settings changed, so we clear the frame buffers */ - memset(cam->frame[0].buffer, 0, cam->nbuffers*cam->frame[0].size); - - DBG(4, "The capture area is %dx%d, Offset (x,y)=(%u,%u)", - win.width, win.height, win.x, win.y) - - PDBGG("x=%u ,y=%u, w=%u, h=%u, ax=%u, ay=%u, s_win.x=%u, s_win.y=%u, " - "cw=%u, ch=%u, win.x=%u, win.y=%u, win.width=%u, win.height=%u", - x, y, w, h, ax, ay, s_win.x, s_win.y, cw, ch, win.x, win.y, - win.width, win.height) - - return 0; - -error: - DBG(1, "Failed to change the capture area size") - return err; -} - - -/*-------------------------------------------------------------------------- - Adjust the asked values for window width and height. - Return 0 on success, -1 otherwise. - --------------------------------------------------------------------------*/ -static int -w9968cf_adjust_window_size(struct w9968cf_device *cam, u32 *width, u32 *height) -{ - unsigned int maxw, maxh, align; - - maxw = cam->upscaling && !(cam->vpp_flag & VPP_DECOMPRESSION) && - w9968cf_vpp ? max((u16)W9968CF_MAX_WIDTH, cam->maxwidth) - : cam->maxwidth; - maxh = cam->upscaling && !(cam->vpp_flag & VPP_DECOMPRESSION) && - w9968cf_vpp ? max((u16)W9968CF_MAX_HEIGHT, cam->maxheight) - : cam->maxheight; - align = (cam->vpp_flag & VPP_DECOMPRESSION) ? 4 : 0; - - v4l_bound_align_image(width, cam->minwidth, maxw, align, - height, cam->minheight, maxh, align, 0); - - PDBGG("Window size adjusted w=%u, h=%u ", *width, *height) - - return 0; -} - - -/*-------------------------------------------------------------------------- - Initialize the FIFO list of requested frames. - --------------------------------------------------------------------------*/ -static void w9968cf_init_framelist(struct w9968cf_device* cam) -{ - u8 i; - - for (i = 0; i < cam->nbuffers; i++) { - cam->requested_frame[i] = NULL; - cam->frame[i].queued = 0; - cam->frame[i].status = F_UNUSED; - } -} - - -/*-------------------------------------------------------------------------- - Add a frame in the FIFO list of requested frames. - This function is called in process context. - --------------------------------------------------------------------------*/ -static void w9968cf_push_frame(struct w9968cf_device* cam, u8 f_num) -{ - u8 f; - unsigned long lock_flags; - - spin_lock_irqsave(&cam->flist_lock, lock_flags); - - for (f=0; cam->requested_frame[f] != NULL; f++); - cam->requested_frame[f] = &cam->frame[f_num]; - cam->frame[f_num].queued = 1; - cam->frame[f_num].status = F_UNUSED; /* clear the status */ - - spin_unlock_irqrestore(&cam->flist_lock, lock_flags); - - DBG(6, "Frame #%u pushed into the FIFO list. Position %u", f_num, f) -} - - -/*-------------------------------------------------------------------------- - Read, store and remove the first pointer in the FIFO list of requested - frames. This function is called in interrupt context. - --------------------------------------------------------------------------*/ -static void -w9968cf_pop_frame(struct w9968cf_device* cam, struct w9968cf_frame_t** framep) -{ - u8 i; - - spin_lock(&cam->flist_lock); - - *framep = cam->requested_frame[0]; - - /* Shift the list of pointers */ - for (i = 0; i < cam->nbuffers-1; i++) - cam->requested_frame[i] = cam->requested_frame[i+1]; - cam->requested_frame[i] = NULL; - - spin_unlock(&cam->flist_lock); - - DBG(6,"Popped frame #%d from the list", (*framep)->number) -} - - -/*-------------------------------------------------------------------------- - High-level video post-processing routine on grabbed frames. - Return 0 on success, a negative number otherwise. - --------------------------------------------------------------------------*/ -static int -w9968cf_postprocess_frame(struct w9968cf_device* cam, - struct w9968cf_frame_t* fr) -{ - void *pIn = fr->buffer, *pOut = cam->frame_vpp.buffer, *tmp; - u16 w = cam->window.width, - h = cam->window.height, - d = cam->picture.depth, - fmt = cam->picture.palette, - rgb = cam->force_rgb, - hw_w = cam->hw_width, - hw_h = cam->hw_height, - hw_d = cam->hw_depth; - int err = 0; - - #define _PSWAP(pIn, pOut) {tmp = (pIn); (pIn) = (pOut); (pOut) = tmp;} - - if (cam->vpp_flag & VPP_DECOMPRESSION) { - memcpy(pOut, pIn, fr->length); - _PSWAP(pIn, pOut) - err = w9968cf_vpp->decode(pIn, fr->length, hw_w, hw_h, pOut); - PDBGG("Compressed frame length: %lu",(unsigned long)fr->length) - fr->length = (hw_w*hw_h*hw_d)/8; - _PSWAP(pIn, pOut) - if (err) { - DBG(4, "An error occurred while decoding the frame: " - "%s", symbolic(decoder_errlist, err)) - return err; - } else - DBG(6, "Frame decoded") - } - - if (cam->vpp_flag & VPP_SWAP_YUV_BYTES) { - w9968cf_vpp->swap_yuvbytes(pIn, fr->length); - DBG(6, "Original UYVY component ordering changed") - } - - if (cam->vpp_flag & VPP_UPSCALE) { - w9968cf_vpp->scale_up(pIn, pOut, hw_w, hw_h, hw_d, w, h); - fr->length = (w*h*hw_d)/8; - _PSWAP(pIn, pOut) - DBG(6, "Vertical up-scaling done: %u,%u,%ubpp->%u,%u", - hw_w, hw_h, hw_d, w, h) - } - - if (cam->vpp_flag & VPP_UYVY_TO_RGBX) { - w9968cf_vpp->uyvy_to_rgbx(pIn, fr->length, pOut, fmt, rgb); - fr->length = (w*h*d)/8; - _PSWAP(pIn, pOut) - DBG(6, "UYVY-16bit to %s conversion done", - symbolic(v4l1_plist, fmt)) - } - - if (pOut == fr->buffer) - memcpy(fr->buffer, cam->frame_vpp.buffer, fr->length); - - return 0; -} - - - -/**************************************************************************** - * Image sensor control routines * - ****************************************************************************/ - -static int -w9968cf_sensor_set_control(struct w9968cf_device* cam, int cid, int val) -{ - struct ovcamchip_control ctl; - int err; - - ctl.id = cid; - ctl.value = val; - - err = w9968cf_sensor_cmd(cam, OVCAMCHIP_CMD_S_CTRL, &ctl); - - return err; -} - - -static int -w9968cf_sensor_get_control(struct w9968cf_device* cam, int cid, int* val) -{ - struct ovcamchip_control ctl; - int err; - - ctl.id = cid; - - err = w9968cf_sensor_cmd(cam, OVCAMCHIP_CMD_G_CTRL, &ctl); - if (!err) - *val = ctl.value; - - return err; -} - - -static int -w9968cf_sensor_cmd(struct w9968cf_device* cam, unsigned int cmd, void* arg) -{ - int rc; - - rc = v4l2_subdev_call(cam->sensor_sd, core, ioctl, cmd, arg); - /* The I2C driver returns -EPERM on non-supported controls */ - return (rc < 0 && rc != -EPERM) ? rc : 0; -} - - -/*-------------------------------------------------------------------------- - Update some settings of the image sensor. - Returns: 0 on success, a negative number otherwise. - --------------------------------------------------------------------------*/ -static int w9968cf_sensor_update_settings(struct w9968cf_device* cam) -{ - int err = 0; - - /* Auto brightness */ - err = w9968cf_sensor_set_control(cam, OVCAMCHIP_CID_AUTOBRIGHT, - cam->auto_brt); - if (err) - return err; - - /* Auto exposure */ - err = w9968cf_sensor_set_control(cam, OVCAMCHIP_CID_AUTOEXP, - cam->auto_exp); - if (err) - return err; - - /* Banding filter */ - err = w9968cf_sensor_set_control(cam, OVCAMCHIP_CID_BANDFILT, - cam->bandfilt); - if (err) - return err; - - /* Light frequency */ - err = w9968cf_sensor_set_control(cam, OVCAMCHIP_CID_FREQ, - cam->lightfreq); - if (err) - return err; - - /* Back light */ - err = w9968cf_sensor_set_control(cam, OVCAMCHIP_CID_BACKLIGHT, - cam->backlight); - if (err) - return err; - - /* Mirror */ - err = w9968cf_sensor_set_control(cam, OVCAMCHIP_CID_MIRROR, - cam->mirror); - if (err) - return err; - - return 0; -} - - -/*-------------------------------------------------------------------------- - Get some current picture settings from the image sensor and update the - internal 'picture' structure of the camera. - Returns: 0 on success, a negative number otherwise. - --------------------------------------------------------------------------*/ -static int w9968cf_sensor_get_picture(struct w9968cf_device* cam) -{ - int err, v; - - err = w9968cf_sensor_get_control(cam, OVCAMCHIP_CID_CONT, &v); - if (err) - return err; - cam->picture.contrast = v; - - err = w9968cf_sensor_get_control(cam, OVCAMCHIP_CID_BRIGHT, &v); - if (err) - return err; - cam->picture.brightness = v; - - err = w9968cf_sensor_get_control(cam, OVCAMCHIP_CID_SAT, &v); - if (err) - return err; - cam->picture.colour = v; - - err = w9968cf_sensor_get_control(cam, OVCAMCHIP_CID_HUE, &v); - if (err) - return err; - cam->picture.hue = v; - - DBG(5, "Got picture settings from the image sensor") - - PDBGG("Brightness, contrast, hue, colour, whiteness are " - "%u,%u,%u,%u,%u", cam->picture.brightness,cam->picture.contrast, - cam->picture.hue, cam->picture.colour, cam->picture.whiteness) - - return 0; -} - - -/*-------------------------------------------------------------------------- - Update picture settings of the image sensor. - Returns: 0 on success, a negative number otherwise. - --------------------------------------------------------------------------*/ -static int -w9968cf_sensor_update_picture(struct w9968cf_device* cam, - struct video_picture pict) -{ - int err = 0; - - if ((!cam->sensor_initialized) - || pict.contrast != cam->picture.contrast) { - err = w9968cf_sensor_set_control(cam, OVCAMCHIP_CID_CONT, - pict.contrast); - if (err) - goto fail; - DBG(4, "Contrast changed from %u to %u", - cam->picture.contrast, pict.contrast) - cam->picture.contrast = pict.contrast; - } - - if (((!cam->sensor_initialized) || - pict.brightness != cam->picture.brightness) && (!cam->auto_brt)) { - err = w9968cf_sensor_set_control(cam, OVCAMCHIP_CID_BRIGHT, - pict.brightness); - if (err) - goto fail; - DBG(4, "Brightness changed from %u to %u", - cam->picture.brightness, pict.brightness) - cam->picture.brightness = pict.brightness; - } - - if ((!cam->sensor_initialized) || pict.colour != cam->picture.colour) { - err = w9968cf_sensor_set_control(cam, OVCAMCHIP_CID_SAT, - pict.colour); - if (err) - goto fail; - DBG(4, "Colour changed from %u to %u", - cam->picture.colour, pict.colour) - cam->picture.colour = pict.colour; - } - - if ((!cam->sensor_initialized) || pict.hue != cam->picture.hue) { - err = w9968cf_sensor_set_control(cam, OVCAMCHIP_CID_HUE, - pict.hue); - if (err) - goto fail; - DBG(4, "Hue changed from %u to %u", - cam->picture.hue, pict.hue) - cam->picture.hue = pict.hue; - } - - return 0; - -fail: - DBG(4, "Failed to change sensor picture setting") - return err; -} - - - -/**************************************************************************** - * Camera configuration * - ****************************************************************************/ - -/*-------------------------------------------------------------------------- - This function is called when a supported image sensor is detected. - Return 0 if the initialization succeeds, a negative number otherwise. - --------------------------------------------------------------------------*/ -static int w9968cf_sensor_init(struct w9968cf_device* cam) -{ - int err = 0; - - if ((err = w9968cf_sensor_cmd(cam, OVCAMCHIP_CMD_INITIALIZE, - &cam->monochrome))) - goto error; - - if ((err = w9968cf_sensor_cmd(cam, OVCAMCHIP_CMD_Q_SUBTYPE, - &cam->sensor))) - goto error; - - /* NOTE: Make sure width and height are a multiple of 16 */ - switch (v4l2_i2c_subdev_addr(cam->sensor_sd)) { - case OV6xx0_SID: - cam->maxwidth = 352; - cam->maxheight = 288; - cam->minwidth = 64; - cam->minheight = 48; - break; - case OV7xx0_SID: - cam->maxwidth = 640; - cam->maxheight = 480; - cam->minwidth = 64; - cam->minheight = 48; - break; - default: - DBG(1, "Not supported image sensor detected for %s", - symbolic(camlist, cam->id)) - return -EINVAL; - } - - /* These values depend on the ones in the ovxxx0.c sources */ - switch (cam->sensor) { - case CC_OV7620: - cam->start_cropx = 287; - cam->start_cropy = 35; - /* Seems to work around a bug in the image sensor */ - cam->vs_polarity = 1; - cam->hs_polarity = 1; - break; - default: - cam->start_cropx = 320; - cam->start_cropy = 35; - cam->vs_polarity = 1; - cam->hs_polarity = 0; - } - - if ((err = w9968cf_sensor_update_settings(cam))) - goto error; - - if ((err = w9968cf_sensor_update_picture(cam, cam->picture))) - goto error; - - cam->sensor_initialized = 1; - - DBG(2, "%s image sensor initialized", symbolic(senlist, cam->sensor)) - return 0; - -error: - cam->sensor_initialized = 0; - cam->sensor = CC_UNKNOWN; - DBG(1, "Image sensor initialization failed for %s (%s). " - "Try to detach and attach this device again", - symbolic(camlist, cam->id), video_device_node_name(cam->v4ldev)) - return err; -} - - -/*-------------------------------------------------------------------------- - Fill some basic fields in the main device data structure. - This function is called once on w9968cf_usb_probe() for each recognized - camera. - --------------------------------------------------------------------------*/ -static void -w9968cf_configure_camera(struct w9968cf_device* cam, - struct usb_device* udev, - enum w9968cf_model_id mod_id, - const unsigned short dev_nr) -{ - mutex_init(&cam->fileop_mutex); - init_waitqueue_head(&cam->open); - spin_lock_init(&cam->urb_lock); - spin_lock_init(&cam->flist_lock); - - cam->users = 0; - cam->disconnected = 0; - cam->id = mod_id; - cam->sensor = CC_UNKNOWN; - cam->sensor_initialized = 0; - - /* Calculate the alternate setting number (from 1 to 16) - according to the 'packet_size' module parameter */ - if (packet_size[dev_nr] < W9968CF_MIN_PACKET_SIZE) - packet_size[dev_nr] = W9968CF_MIN_PACKET_SIZE; - for (cam->altsetting = 1; - packet_size[dev_nr] < wMaxPacketSize[cam->altsetting-1]; - cam->altsetting++); - - cam->max_buffers = (max_buffers[dev_nr] < 2 || - max_buffers[dev_nr] > W9968CF_MAX_BUFFERS) - ? W9968CF_BUFFERS : (u8)max_buffers[dev_nr]; - - cam->double_buffer = (double_buffer[dev_nr] == 0 || - double_buffer[dev_nr] == 1) - ? (u8)double_buffer[dev_nr]:W9968CF_DOUBLE_BUFFER; - - cam->clamping = (clamping[dev_nr] == 0 || clamping[dev_nr] == 1) - ? (u8)clamping[dev_nr] : W9968CF_CLAMPING; - - cam->filter_type = (filter_type[dev_nr] == 0 || - filter_type[dev_nr] == 1 || - filter_type[dev_nr] == 2) - ? (u8)filter_type[dev_nr] : W9968CF_FILTER_TYPE; - - cam->capture = 1; - - cam->largeview = (largeview[dev_nr] == 0 || largeview[dev_nr] == 1) - ? (u8)largeview[dev_nr] : W9968CF_LARGEVIEW; - - cam->decompression = (decompression[dev_nr] == 0 || - decompression[dev_nr] == 1 || - decompression[dev_nr] == 2) - ? (u8)decompression[dev_nr]:W9968CF_DECOMPRESSION; - - cam->upscaling = (upscaling[dev_nr] == 0 || - upscaling[dev_nr] == 1) - ? (u8)upscaling[dev_nr] : W9968CF_UPSCALING; - - cam->auto_brt = (autobright[dev_nr] == 0 || autobright[dev_nr] == 1) - ? (u8)autobright[dev_nr] : W9968CF_AUTOBRIGHT; - - cam->auto_exp = (autoexp[dev_nr] == 0 || autoexp[dev_nr] == 1) - ? (u8)autoexp[dev_nr] : W9968CF_AUTOEXP; - - cam->lightfreq = (lightfreq[dev_nr] == 50 || lightfreq[dev_nr] == 60) - ? (u8)lightfreq[dev_nr] : W9968CF_LIGHTFREQ; - - cam->bandfilt = (bandingfilter[dev_nr] == 0 || - bandingfilter[dev_nr] == 1) - ? (u8)bandingfilter[dev_nr] : W9968CF_BANDINGFILTER; - - cam->backlight = (backlight[dev_nr] == 0 || backlight[dev_nr] == 1) - ? (u8)backlight[dev_nr] : W9968CF_BACKLIGHT; - - cam->clockdiv = (clockdiv[dev_nr] == -1 || clockdiv[dev_nr] >= 0) - ? (s8)clockdiv[dev_nr] : W9968CF_CLOCKDIV; - - cam->mirror = (mirror[dev_nr] == 0 || mirror[dev_nr] == 1) - ? (u8)mirror[dev_nr] : W9968CF_MIRROR; - - cam->monochrome = (monochrome[dev_nr] == 0 || monochrome[dev_nr] == 1) - ? monochrome[dev_nr] : W9968CF_MONOCHROME; - - cam->picture.brightness = (u16)brightness[dev_nr]; - cam->picture.hue = (u16)hue[dev_nr]; - cam->picture.colour = (u16)colour[dev_nr]; - cam->picture.contrast = (u16)contrast[dev_nr]; - cam->picture.whiteness = (u16)whiteness[dev_nr]; - if (w9968cf_valid_palette((u16)force_palette[dev_nr])) { - cam->picture.palette = (u16)force_palette[dev_nr]; - cam->force_palette = 1; - } else { - cam->force_palette = 0; - if (cam->decompression == 0) - cam->picture.palette = W9968CF_PALETTE_DECOMP_OFF; - else if (cam->decompression == 1) - cam->picture.palette = W9968CF_PALETTE_DECOMP_FORCE; - else - cam->picture.palette = W9968CF_PALETTE_DECOMP_ON; - } - cam->picture.depth = w9968cf_valid_depth(cam->picture.palette); - - cam->force_rgb = (force_rgb[dev_nr] == 0 || force_rgb[dev_nr] == 1) - ? (u8)force_rgb[dev_nr] : W9968CF_FORCE_RGB; - - cam->window.x = 0; - cam->window.y = 0; - cam->window.width = W9968CF_WIDTH; - cam->window.height = W9968CF_HEIGHT; - cam->window.chromakey = 0; - cam->window.clipcount = 0; - cam->window.flags = 0; - - DBG(3, "%s configured with settings #%u:", - symbolic(camlist, cam->id), dev_nr) - - DBG(3, "- Data packet size for USB isochrnous transfer: %u bytes", - wMaxPacketSize[cam->altsetting-1]) - - DBG(3, "- Number of requested video frame buffers: %u", - cam->max_buffers) - - if (cam->double_buffer) - DBG(3, "- Hardware double buffering enabled") - else - DBG(3, "- Hardware double buffering disabled") - - if (cam->filter_type == 0) - DBG(3, "- Video filtering disabled") - else if (cam->filter_type == 1) - DBG(3, "- Video filtering enabled: type 1-2-1") - else if (cam->filter_type == 2) - DBG(3, "- Video filtering enabled: type 2-3-6-3-2") - - if (cam->clamping) - DBG(3, "- Video data clamping (CCIR-601 format) enabled") - else - DBG(3, "- Video data clamping (CCIR-601 format) disabled") - - if (cam->largeview) - DBG(3, "- Large view enabled") - else - DBG(3, "- Large view disabled") - - if ((cam->decompression) == 0 && (!cam->force_palette)) - DBG(3, "- Decompression disabled") - else if ((cam->decompression) == 1 && (!cam->force_palette)) - DBG(3, "- Decompression forced") - else if ((cam->decompression) == 2 && (!cam->force_palette)) - DBG(3, "- Decompression allowed") - - if (cam->upscaling) - DBG(3, "- Software image scaling enabled") - else - DBG(3, "- Software image scaling disabled") - - if (cam->force_palette) - DBG(3, "- Image palette forced to %s", - symbolic(v4l1_plist, cam->picture.palette)) - - if (cam->force_rgb) - DBG(3, "- RGB component ordering will be used instead of BGR") - - if (cam->auto_brt) - DBG(3, "- Auto brightness enabled") - else - DBG(3, "- Auto brightness disabled") - - if (cam->auto_exp) - DBG(3, "- Auto exposure enabled") - else - DBG(3, "- Auto exposure disabled") - - if (cam->backlight) - DBG(3, "- Backlight exposure algorithm enabled") - else - DBG(3, "- Backlight exposure algorithm disabled") - - if (cam->mirror) - DBG(3, "- Mirror enabled") - else - DBG(3, "- Mirror disabled") - - if (cam->bandfilt) - DBG(3, "- Banding filter enabled") - else - DBG(3, "- Banding filter disabled") - - DBG(3, "- Power lighting frequency: %u", cam->lightfreq) - - if (cam->clockdiv == -1) - DBG(3, "- Automatic clock divisor enabled") - else - DBG(3, "- Clock divisor: %d", cam->clockdiv) - - if (cam->monochrome) - DBG(3, "- Image sensor used as monochrome") - else - DBG(3, "- Image sensor not used as monochrome") -} - - -/*-------------------------------------------------------------------------- - If the video post-processing module is not loaded, some parameters - must be overridden. - --------------------------------------------------------------------------*/ -static void w9968cf_adjust_configuration(struct w9968cf_device* cam) -{ - if (!w9968cf_vpp) { - if (cam->decompression == 1) { - cam->decompression = 2; - DBG(2, "Video post-processing module not found: " - "'decompression' parameter forced to 2") - } - if (cam->upscaling) { - cam->upscaling = 0; - DBG(2, "Video post-processing module not found: " - "'upscaling' parameter forced to 0") - } - if (cam->picture.palette != VIDEO_PALETTE_UYVY) { - cam->force_palette = 0; - DBG(2, "Video post-processing module not found: " - "'force_palette' parameter forced to 0") - } - cam->picture.palette = VIDEO_PALETTE_UYVY; - cam->picture.depth = w9968cf_valid_depth(cam->picture.palette); - } -} - - -/*-------------------------------------------------------------------------- - Release the resources used by the driver. - This function is called on disconnect - (or on close if deallocation has been deferred) - --------------------------------------------------------------------------*/ -static void w9968cf_release_resources(struct w9968cf_device* cam) -{ - mutex_lock(&w9968cf_devlist_mutex); - - DBG(2, "V4L device deregistered: %s", - video_device_node_name(cam->v4ldev)) - - video_unregister_device(cam->v4ldev); - list_del(&cam->v4llist); - i2c_del_adapter(&cam->i2c_adapter); - w9968cf_deallocate_memory(cam); - kfree(cam->control_buffer); - kfree(cam->data_buffer); - v4l2_device_unregister(&cam->v4l2_dev); - - mutex_unlock(&w9968cf_devlist_mutex); -} - - - -/**************************************************************************** - * Video4Linux interface * - ****************************************************************************/ - -static int w9968cf_open(struct file *filp) -{ - struct w9968cf_device* cam; - int err; - - /* This the only safe way to prevent race conditions with disconnect */ - if (!down_read_trylock(&w9968cf_disconnect)) - return -EAGAIN; - - cam = (struct w9968cf_device*)video_get_drvdata(video_devdata(filp)); - - mutex_lock(&cam->dev_mutex); - - if (cam->sensor == CC_UNKNOWN) { - DBG(2, "No supported image sensor has been detected by the " - "'ovcamchip' module for the %s (%s). Make sure " - "it is loaded *before* (re)connecting the camera.", - symbolic(camlist, cam->id), - video_device_node_name(cam->v4ldev)) - mutex_unlock(&cam->dev_mutex); - up_read(&w9968cf_disconnect); - return -ENODEV; - } - - if (cam->users) { - DBG(2, "%s (%s) has been already occupied by '%s'", - symbolic(camlist, cam->id), - video_device_node_name(cam->v4ldev), cam->command) - if ((filp->f_flags & O_NONBLOCK)||(filp->f_flags & O_NDELAY)) { - mutex_unlock(&cam->dev_mutex); - up_read(&w9968cf_disconnect); - return -EWOULDBLOCK; - } - mutex_unlock(&cam->dev_mutex); - err = wait_event_interruptible_exclusive(cam->open, - cam->disconnected || - !cam->users); - if (err) { - up_read(&w9968cf_disconnect); - return err; - } - if (cam->disconnected) { - up_read(&w9968cf_disconnect); - return -ENODEV; - } - mutex_lock(&cam->dev_mutex); - } - - DBG(5, "Opening '%s', %s ...", - symbolic(camlist, cam->id), video_device_node_name(cam->v4ldev)) - - cam->streaming = 0; - cam->misconfigured = 0; - - w9968cf_adjust_configuration(cam); - - if ((err = w9968cf_allocate_memory(cam))) - goto deallocate_memory; - - if ((err = w9968cf_init_chip(cam))) - goto deallocate_memory; - - if ((err = w9968cf_start_transfer(cam))) - goto deallocate_memory; - - filp->private_data = cam; - - cam->users++; - strcpy(cam->command, current->comm); - - init_waitqueue_head(&cam->wait_queue); - - DBG(5, "Video device is open") - - mutex_unlock(&cam->dev_mutex); - up_read(&w9968cf_disconnect); - - return 0; - -deallocate_memory: - w9968cf_deallocate_memory(cam); - DBG(2, "Failed to open the video device") - mutex_unlock(&cam->dev_mutex); - up_read(&w9968cf_disconnect); - return err; -} - - -static int w9968cf_release(struct file *filp) -{ - struct w9968cf_device* cam; - - cam = (struct w9968cf_device*)video_get_drvdata(video_devdata(filp)); - - mutex_lock(&cam->dev_mutex); /* prevent disconnect() to be called */ - - w9968cf_stop_transfer(cam); - - if (cam->disconnected) { - w9968cf_release_resources(cam); - mutex_unlock(&cam->dev_mutex); - kfree(cam); - return 0; - } - - cam->users--; - w9968cf_deallocate_memory(cam); - wake_up_interruptible_nr(&cam->open, 1); - - DBG(5, "Video device closed") - mutex_unlock(&cam->dev_mutex); - return 0; -} - - -static ssize_t -w9968cf_read(struct file* filp, char __user * buf, size_t count, loff_t* f_pos) -{ - struct w9968cf_device* cam; - struct w9968cf_frame_t* fr; - int err = 0; - - cam = (struct w9968cf_device*)video_get_drvdata(video_devdata(filp)); - - if (filp->f_flags & O_NONBLOCK) - return -EWOULDBLOCK; - - if (mutex_lock_interruptible(&cam->fileop_mutex)) - return -ERESTARTSYS; - - if (cam->disconnected) { - DBG(2, "Device not present") - mutex_unlock(&cam->fileop_mutex); - return -ENODEV; - } - - if (cam->misconfigured) { - DBG(2, "The camera is misconfigured. Close and open it again.") - mutex_unlock(&cam->fileop_mutex); - return -EIO; - } - - if (!cam->frame[0].queued) - w9968cf_push_frame(cam, 0); - - if (!cam->frame[1].queued) - w9968cf_push_frame(cam, 1); - - err = wait_event_interruptible(cam->wait_queue, - cam->frame[0].status == F_READY || - cam->frame[1].status == F_READY || - cam->disconnected); - if (err) { - mutex_unlock(&cam->fileop_mutex); - return err; - } - if (cam->disconnected) { - mutex_unlock(&cam->fileop_mutex); - return -ENODEV; - } - - fr = (cam->frame[0].status == F_READY) ? &cam->frame[0]:&cam->frame[1]; - - if (w9968cf_vpp) - w9968cf_postprocess_frame(cam, fr); - - if (count > fr->length) - count = fr->length; - - if (copy_to_user(buf, fr->buffer, count)) { - fr->status = F_UNUSED; - mutex_unlock(&cam->fileop_mutex); - return -EFAULT; - } - *f_pos += count; - - fr->status = F_UNUSED; - - DBG(5, "%zu bytes read", count) - - mutex_unlock(&cam->fileop_mutex); - return count; -} - - -static int w9968cf_mmap(struct file* filp, struct vm_area_struct *vma) -{ - struct w9968cf_device* cam = (struct w9968cf_device*) - video_get_drvdata(video_devdata(filp)); - unsigned long vsize = vma->vm_end - vma->vm_start, - psize = cam->nbuffers * cam->frame[0].size, - start = vma->vm_start, - pos = (unsigned long)cam->frame[0].buffer, - page; - - if (cam->disconnected) { - DBG(2, "Device not present") - return -ENODEV; - } - - if (cam->misconfigured) { - DBG(2, "The camera is misconfigured. Close and open it again") - return -EIO; - } - - PDBGG("mmapping %lu bytes...", vsize) - - if (vsize > psize - (vma->vm_pgoff << PAGE_SHIFT)) - return -EINVAL; - - while (vsize > 0) { - page = vmalloc_to_pfn((void *)pos); - if (remap_pfn_range(vma, start, page + vma->vm_pgoff, - PAGE_SIZE, vma->vm_page_prot)) - return -EAGAIN; - start += PAGE_SIZE; - pos += PAGE_SIZE; - vsize -= PAGE_SIZE; - } - - DBG(5, "mmap method successfully called") - return 0; -} - - -static long -w9968cf_ioctl(struct file *filp, - unsigned int cmd, unsigned long arg) -{ - struct w9968cf_device* cam; - long err; - - cam = (struct w9968cf_device*)video_get_drvdata(video_devdata(filp)); - - if (mutex_lock_interruptible(&cam->fileop_mutex)) - return -ERESTARTSYS; - - if (cam->disconnected) { - DBG(2, "Device not present") - mutex_unlock(&cam->fileop_mutex); - return -ENODEV; - } - - if (cam->misconfigured) { - DBG(2, "The camera is misconfigured. Close and open it again.") - mutex_unlock(&cam->fileop_mutex); - return -EIO; - } - - err = w9968cf_v4l_ioctl(filp, cmd, (void __user *)arg); - - mutex_unlock(&cam->fileop_mutex); - return err; -} - - -static long w9968cf_v4l_ioctl(struct file *filp, - unsigned int cmd, void __user *arg) -{ - struct w9968cf_device* cam; - const char* v4l1_ioctls[] = { - "?", "CGAP", "GCHAN", "SCHAN", "GTUNER", "STUNER", - "GPICT", "SPICT", "CCAPTURE", "GWIN", "SWIN", "GFBUF", - "SFBUF", "KEY", "GFREQ", "SFREQ", "GAUDIO", "SAUDIO", - "SYNC", "MCAPTURE", "GMBUF", "GUNIT", "GCAPTURE", "SCAPTURE", - "SPLAYMODE", "SWRITEMODE", "GPLAYINFO", "SMICROCODE", - "GVBIFMT", "SVBIFMT" - }; - - #define V4L1_IOCTL(cmd) \ - ((_IOC_NR((cmd)) < ARRAY_SIZE(v4l1_ioctls)) ? \ - v4l1_ioctls[_IOC_NR((cmd))] : "?") - - cam = (struct w9968cf_device*)video_get_drvdata(video_devdata(filp)); - - switch (cmd) { - - case VIDIOCGCAP: /* get video capability */ - { - struct video_capability cap = { - .type = VID_TYPE_CAPTURE | VID_TYPE_SCALES, - .channels = 1, - .audios = 0, - .minwidth = cam->minwidth, - .minheight = cam->minheight, - }; - sprintf(cap.name, "W996[87]CF USB Camera"); - cap.maxwidth = (cam->upscaling && w9968cf_vpp) - ? max((u16)W9968CF_MAX_WIDTH, cam->maxwidth) - : cam->maxwidth; - cap.maxheight = (cam->upscaling && w9968cf_vpp) - ? max((u16)W9968CF_MAX_HEIGHT, cam->maxheight) - : cam->maxheight; - - if (copy_to_user(arg, &cap, sizeof(cap))) - return -EFAULT; - - DBG(5, "VIDIOCGCAP successfully called") - return 0; - } - - case VIDIOCGCHAN: /* get video channel informations */ - { - struct video_channel chan; - if (copy_from_user(&chan, arg, sizeof(chan))) - return -EFAULT; - - if (chan.channel != 0) - return -EINVAL; - - strcpy(chan.name, "Camera"); - chan.tuners = 0; - chan.flags = 0; - chan.type = VIDEO_TYPE_CAMERA; - chan.norm = VIDEO_MODE_AUTO; - - if (copy_to_user(arg, &chan, sizeof(chan))) - return -EFAULT; - - DBG(5, "VIDIOCGCHAN successfully called") - return 0; - } - - case VIDIOCSCHAN: /* set active channel */ - { - struct video_channel chan; - - if (copy_from_user(&chan, arg, sizeof(chan))) - return -EFAULT; - - if (chan.channel != 0) - return -EINVAL; - - DBG(5, "VIDIOCSCHAN successfully called") - return 0; - } - - case VIDIOCGPICT: /* get image properties of the picture */ - { - if (w9968cf_sensor_get_picture(cam)) - return -EIO; - - if (copy_to_user(arg, &cam->picture, sizeof(cam->picture))) - return -EFAULT; - - DBG(5, "VIDIOCGPICT successfully called") - return 0; - } - - case VIDIOCSPICT: /* change picture settings */ - { - struct video_picture pict; - int err = 0; - - if (copy_from_user(&pict, arg, sizeof(pict))) - return -EFAULT; - - if ( (cam->force_palette || !w9968cf_vpp) - && pict.palette != cam->picture.palette ) { - DBG(4, "Palette %s rejected: only %s is allowed", - symbolic(v4l1_plist, pict.palette), - symbolic(v4l1_plist, cam->picture.palette)) - return -EINVAL; - } - - if (!w9968cf_valid_palette(pict.palette)) { - DBG(4, "Palette %s not supported. VIDIOCSPICT failed", - symbolic(v4l1_plist, pict.palette)) - return -EINVAL; - } - - if (!cam->force_palette) { - if (cam->decompression == 0) { - if (w9968cf_need_decompression(pict.palette)) { - DBG(4, "Decompression disabled: palette %s is not " - "allowed. VIDIOCSPICT failed", - symbolic(v4l1_plist, pict.palette)) - return -EINVAL; - } - } else if (cam->decompression == 1) { - if (!w9968cf_need_decompression(pict.palette)) { - DBG(4, "Decompression forced: palette %s is not " - "allowed. VIDIOCSPICT failed", - symbolic(v4l1_plist, pict.palette)) - return -EINVAL; - } - } - } - - if (pict.depth != w9968cf_valid_depth(pict.palette)) { - DBG(4, "Requested depth %u bpp is not valid for %s " - "palette: ignored and changed to %u bpp", - pict.depth, symbolic(v4l1_plist, pict.palette), - w9968cf_valid_depth(pict.palette)) - pict.depth = w9968cf_valid_depth(pict.palette); - } - - if (pict.palette != cam->picture.palette) { - if(*cam->requested_frame - || cam->frame_current->queued) { - err = wait_event_interruptible - ( cam->wait_queue, - cam->disconnected || - (!*cam->requested_frame && - !cam->frame_current->queued) ); - if (err) - return err; - if (cam->disconnected) - return -ENODEV; - } - - if (w9968cf_stop_transfer(cam)) - goto ioctl_fail; - - if (w9968cf_set_picture(cam, pict)) - goto ioctl_fail; - - if (w9968cf_start_transfer(cam)) - goto ioctl_fail; - - } else if (w9968cf_sensor_update_picture(cam, pict)) - return -EIO; - - - DBG(5, "VIDIOCSPICT successfully called") - return 0; - } - - case VIDIOCSWIN: /* set capture area */ - { - struct video_window win; - int err = 0; - - if (copy_from_user(&win, arg, sizeof(win))) - return -EFAULT; - - DBG(6, "VIDIOCSWIN called: clipcount=%d, flags=%u, " - "x=%u, y=%u, %ux%u", win.clipcount, win.flags, - win.x, win.y, win.width, win.height) - - if (win.clipcount != 0 || win.flags != 0) - return -EINVAL; - - if ((err = w9968cf_adjust_window_size(cam, &win.width, - &win.height))) { - DBG(4, "Resolution not supported (%ux%u). " - "VIDIOCSWIN failed", win.width, win.height) - return err; - } - - if (win.x != cam->window.x || - win.y != cam->window.y || - win.width != cam->window.width || - win.height != cam->window.height) { - if(*cam->requested_frame - || cam->frame_current->queued) { - err = wait_event_interruptible - ( cam->wait_queue, - cam->disconnected || - (!*cam->requested_frame && - !cam->frame_current->queued) ); - if (err) - return err; - if (cam->disconnected) - return -ENODEV; - } - - if (w9968cf_stop_transfer(cam)) - goto ioctl_fail; - - /* This _must_ be called before set_window() */ - if (w9968cf_set_picture(cam, cam->picture)) - goto ioctl_fail; - - if (w9968cf_set_window(cam, win)) - goto ioctl_fail; - - if (w9968cf_start_transfer(cam)) - goto ioctl_fail; - } - - DBG(5, "VIDIOCSWIN successfully called. ") - return 0; - } - - case VIDIOCGWIN: /* get current window properties */ - { - if (copy_to_user(arg,&cam->window,sizeof(struct video_window))) - return -EFAULT; - - DBG(5, "VIDIOCGWIN successfully called") - return 0; - } - - case VIDIOCGMBUF: /* request for memory (mapped) buffer */ - { - struct video_mbuf mbuf; - u8 i; - - mbuf.size = cam->nbuffers * cam->frame[0].size; - mbuf.frames = cam->nbuffers; - for (i = 0; i < cam->nbuffers; i++) - mbuf.offsets[i] = (unsigned long)cam->frame[i].buffer - - (unsigned long)cam->frame[0].buffer; - - if (copy_to_user(arg, &mbuf, sizeof(mbuf))) - return -EFAULT; - - DBG(5, "VIDIOCGMBUF successfully called") - return 0; - } - - case VIDIOCMCAPTURE: /* start the capture to a frame */ - { - struct video_mmap mmap; - struct w9968cf_frame_t* fr; - u32 w, h; - int err = 0; - - if (copy_from_user(&mmap, arg, sizeof(mmap))) - return -EFAULT; - - DBG(6, "VIDIOCMCAPTURE called: frame #%u, format=%s, %dx%d", - mmap.frame, symbolic(v4l1_plist, mmap.format), - mmap.width, mmap.height) - - if (mmap.frame >= cam->nbuffers) { - DBG(4, "Invalid frame number (%u). " - "VIDIOCMCAPTURE failed", mmap.frame) - return -EINVAL; - } - - if (mmap.format!=cam->picture.palette && - (cam->force_palette || !w9968cf_vpp)) { - DBG(4, "Palette %s rejected: only %s is allowed", - symbolic(v4l1_plist, mmap.format), - symbolic(v4l1_plist, cam->picture.palette)) - return -EINVAL; - } - - if (!w9968cf_valid_palette(mmap.format)) { - DBG(4, "Palette %s not supported. " - "VIDIOCMCAPTURE failed", - symbolic(v4l1_plist, mmap.format)) - return -EINVAL; - } - - if (!cam->force_palette) { - if (cam->decompression == 0) { - if (w9968cf_need_decompression(mmap.format)) { - DBG(4, "Decompression disabled: palette %s is not " - "allowed. VIDIOCSPICT failed", - symbolic(v4l1_plist, mmap.format)) - return -EINVAL; - } - } else if (cam->decompression == 1) { - if (!w9968cf_need_decompression(mmap.format)) { - DBG(4, "Decompression forced: palette %s is not " - "allowed. VIDIOCSPICT failed", - symbolic(v4l1_plist, mmap.format)) - return -EINVAL; - } - } - } - - w = mmap.width; h = mmap.height; - err = w9968cf_adjust_window_size(cam, &w, &h); - mmap.width = w; mmap.height = h; - if (err) { - DBG(4, "Resolution not supported (%dx%d). " - "VIDIOCMCAPTURE failed", - mmap.width, mmap.height) - return err; - } - - fr = &cam->frame[mmap.frame]; - - if (mmap.width != cam->window.width || - mmap.height != cam->window.height || - mmap.format != cam->picture.palette) { - - struct video_window win; - struct video_picture pict; - - if(*cam->requested_frame - || cam->frame_current->queued) { - DBG(6, "VIDIOCMCAPTURE. Change settings for " - "frame #%u: %dx%d, format %s. Wait...", - mmap.frame, mmap.width, mmap.height, - symbolic(v4l1_plist, mmap.format)) - err = wait_event_interruptible - ( cam->wait_queue, - cam->disconnected || - (!*cam->requested_frame && - !cam->frame_current->queued) ); - if (err) - return err; - if (cam->disconnected) - return -ENODEV; - } - - memcpy(&win, &cam->window, sizeof(win)); - memcpy(&pict, &cam->picture, sizeof(pict)); - win.width = mmap.width; - win.height = mmap.height; - pict.palette = mmap.format; - - if (w9968cf_stop_transfer(cam)) - goto ioctl_fail; - - /* This before set_window */ - if (w9968cf_set_picture(cam, pict)) - goto ioctl_fail; - - if (w9968cf_set_window(cam, win)) - goto ioctl_fail; - - if (w9968cf_start_transfer(cam)) - goto ioctl_fail; - - } else if (fr->queued) { - - DBG(6, "Wait until frame #%u is free", mmap.frame) - - err = wait_event_interruptible(cam->wait_queue, - cam->disconnected || - (!fr->queued)); - if (err) - return err; - if (cam->disconnected) - return -ENODEV; - } - - w9968cf_push_frame(cam, mmap.frame); - DBG(5, "VIDIOCMCAPTURE(%u): successfully called", mmap.frame) - return 0; - } - - case VIDIOCSYNC: /* wait until the capture of a frame is finished */ - { - unsigned int f_num; - struct w9968cf_frame_t* fr; - int err = 0; - - if (copy_from_user(&f_num, arg, sizeof(f_num))) - return -EFAULT; - - if (f_num >= cam->nbuffers) { - DBG(4, "Invalid frame number (%u). " - "VIDIOCMCAPTURE failed", f_num) - return -EINVAL; - } - - DBG(6, "VIDIOCSYNC called for frame #%u", f_num) - - fr = &cam->frame[f_num]; - - switch (fr->status) { - case F_UNUSED: - if (!fr->queued) { - DBG(4, "VIDIOSYNC: Frame #%u not requested!", - f_num) - return -EFAULT; - } - case F_ERROR: - case F_GRABBING: - err = wait_event_interruptible(cam->wait_queue, - (fr->status == F_READY) - || cam->disconnected); - if (err) - return err; - if (cam->disconnected) - return -ENODEV; - break; - case F_READY: - break; - } - - if (w9968cf_vpp) - w9968cf_postprocess_frame(cam, fr); - - fr->status = F_UNUSED; - - DBG(5, "VIDIOCSYNC(%u) successfully called", f_num) - return 0; - } - - case VIDIOCGUNIT:/* report the unit numbers of the associated devices*/ - { - struct video_unit unit = { - .video = cam->v4ldev->minor, - .vbi = VIDEO_NO_UNIT, - .radio = VIDEO_NO_UNIT, - .audio = VIDEO_NO_UNIT, - .teletext = VIDEO_NO_UNIT, - }; - - if (copy_to_user(arg, &unit, sizeof(unit))) - return -EFAULT; - - DBG(5, "VIDIOCGUNIT successfully called") - return 0; - } - - case VIDIOCKEY: - return 0; - - case VIDIOCGFBUF: - { - if (clear_user(arg, sizeof(struct video_buffer))) - return -EFAULT; - - DBG(5, "VIDIOCGFBUF successfully called") - return 0; - } - - case VIDIOCGTUNER: - { - struct video_tuner tuner; - if (copy_from_user(&tuner, arg, sizeof(tuner))) - return -EFAULT; - - if (tuner.tuner != 0) - return -EINVAL; - - strcpy(tuner.name, "no_tuner"); - tuner.rangelow = 0; - tuner.rangehigh = 0; - tuner.flags = VIDEO_TUNER_NORM; - tuner.mode = VIDEO_MODE_AUTO; - tuner.signal = 0xffff; - - if (copy_to_user(arg, &tuner, sizeof(tuner))) - return -EFAULT; - - DBG(5, "VIDIOCGTUNER successfully called") - return 0; - } - - case VIDIOCSTUNER: - { - struct video_tuner tuner; - if (copy_from_user(&tuner, arg, sizeof(tuner))) - return -EFAULT; - - if (tuner.tuner != 0) - return -EINVAL; - - if (tuner.mode != VIDEO_MODE_AUTO) - return -EINVAL; - - DBG(5, "VIDIOCSTUNER successfully called") - return 0; - } - - case VIDIOCSFBUF: - case VIDIOCCAPTURE: - case VIDIOCGFREQ: - case VIDIOCSFREQ: - case VIDIOCGAUDIO: - case VIDIOCSAUDIO: - case VIDIOCSPLAYMODE: - case VIDIOCSWRITEMODE: - case VIDIOCGPLAYINFO: - case VIDIOCSMICROCODE: - case VIDIOCGVBIFMT: - case VIDIOCSVBIFMT: - DBG(4, "Unsupported V4L1 IOCtl: VIDIOC%s " - "(type 0x%01X, " - "n. 0x%01X, " - "dir. 0x%01X, " - "size 0x%02X)", - V4L1_IOCTL(cmd), - _IOC_TYPE(cmd),_IOC_NR(cmd),_IOC_DIR(cmd),_IOC_SIZE(cmd)) - - return -EINVAL; - - default: - DBG(4, "Invalid V4L1 IOCtl: VIDIOC%s " - "type 0x%01X, " - "n. 0x%01X, " - "dir. 0x%01X, " - "size 0x%02X", - V4L1_IOCTL(cmd), - _IOC_TYPE(cmd),_IOC_NR(cmd),_IOC_DIR(cmd),_IOC_SIZE(cmd)) - - return -ENOIOCTLCMD; - - } /* end of switch */ - -ioctl_fail: - cam->misconfigured = 1; - DBG(1, "VIDIOC%s failed because of hardware problems. " - "To use the camera, close and open it again.", V4L1_IOCTL(cmd)) - return -EFAULT; -} - - -static const struct v4l2_file_operations w9968cf_fops = { - .owner = THIS_MODULE, - .open = w9968cf_open, - .release = w9968cf_release, - .read = w9968cf_read, - .ioctl = w9968cf_ioctl, - .mmap = w9968cf_mmap, -}; - - - -/**************************************************************************** - * USB probe and V4L registration, disconnect and id_table[] definition * - ****************************************************************************/ - -static int -w9968cf_usb_probe(struct usb_interface* intf, const struct usb_device_id* id) -{ - struct usb_device *udev = interface_to_usbdev(intf); - struct w9968cf_device* cam; - int err = 0; - enum w9968cf_model_id mod_id; - struct list_head* ptr; - u8 sc = 0; /* number of simultaneous cameras */ - static unsigned short dev_nr; /* 0 - we are handling device number n */ - static unsigned short addrs[] = { - OV7xx0_SID, - OV6xx0_SID, - I2C_CLIENT_END - }; - - if (le16_to_cpu(udev->descriptor.idVendor) == winbond_id_table[0].idVendor && - le16_to_cpu(udev->descriptor.idProduct) == winbond_id_table[0].idProduct) - mod_id = W9968CF_MOD_CLVBWGP; /* see camlist[] table */ - else if (le16_to_cpu(udev->descriptor.idVendor) == winbond_id_table[1].idVendor && - le16_to_cpu(udev->descriptor.idProduct) == winbond_id_table[1].idProduct) - mod_id = W9968CF_MOD_GENERIC; /* see camlist[] table */ - else - return -ENODEV; - - cam = (struct w9968cf_device*) - kzalloc(sizeof(struct w9968cf_device), GFP_KERNEL); - if (!cam) - return -ENOMEM; - - err = v4l2_device_register(&intf->dev, &cam->v4l2_dev); - if (err) - goto fail0; - - mutex_init(&cam->dev_mutex); - mutex_lock(&cam->dev_mutex); - - cam->usbdev = udev; - - DBG(2, "%s detected", symbolic(camlist, mod_id)) - - if (simcams > W9968CF_MAX_DEVICES) - simcams = W9968CF_SIMCAMS; - - /* How many cameras are connected ? */ - mutex_lock(&w9968cf_devlist_mutex); - list_for_each(ptr, &w9968cf_dev_list) - sc++; - mutex_unlock(&w9968cf_devlist_mutex); - - if (sc >= simcams) { - DBG(2, "Device rejected: too many connected cameras " - "(max. %u)", simcams) - err = -EPERM; - goto fail; - } - - - /* Allocate 2 bytes of memory for camera control USB transfers */ - if (!(cam->control_buffer = kzalloc(2, GFP_KERNEL))) { - DBG(1,"Couldn't allocate memory for camera control transfers") - err = -ENOMEM; - goto fail; - } - - /* Allocate 8 bytes of memory for USB data transfers to the FSB */ - if (!(cam->data_buffer = kzalloc(8, GFP_KERNEL))) { - DBG(1, "Couldn't allocate memory for data " - "transfers to the FSB") - err = -ENOMEM; - goto fail; - } - - /* Register the V4L device */ - cam->v4ldev = video_device_alloc(); - if (!cam->v4ldev) { - DBG(1, "Could not allocate memory for a V4L structure") - err = -ENOMEM; - goto fail; - } - - strcpy(cam->v4ldev->name, symbolic(camlist, mod_id)); - cam->v4ldev->fops = &w9968cf_fops; - cam->v4ldev->release = video_device_release; - video_set_drvdata(cam->v4ldev, cam); - cam->v4ldev->v4l2_dev = &cam->v4l2_dev; - - err = video_register_device(cam->v4ldev, VFL_TYPE_GRABBER, - video_nr[dev_nr]); - if (err) { - DBG(1, "V4L device registration failed") - if (err == -ENFILE && video_nr[dev_nr] == -1) - DBG(2, "Couldn't find a free /dev/videoX node") - video_nr[dev_nr] = -1; - dev_nr = (dev_nr < W9968CF_MAX_DEVICES-1) ? dev_nr+1 : 0; - goto fail; - } - - DBG(2, "V4L device registered as %s", - video_device_node_name(cam->v4ldev)) - - /* Set some basic constants */ - w9968cf_configure_camera(cam, udev, mod_id, dev_nr); - - /* Add a new entry into the list of V4L registered devices */ - mutex_lock(&w9968cf_devlist_mutex); - list_add(&cam->v4llist, &w9968cf_dev_list); - mutex_unlock(&w9968cf_devlist_mutex); - dev_nr = (dev_nr < W9968CF_MAX_DEVICES-1) ? dev_nr+1 : 0; - - w9968cf_turn_on_led(cam); - - w9968cf_i2c_init(cam); - cam->sensor_sd = v4l2_i2c_new_subdev(&cam->v4l2_dev, - &cam->i2c_adapter, - "ovcamchip", "ovcamchip", 0, addrs); - - usb_set_intfdata(intf, cam); - mutex_unlock(&cam->dev_mutex); - - err = w9968cf_sensor_init(cam); - return 0; - -fail: /* Free unused memory */ - kfree(cam->control_buffer); - kfree(cam->data_buffer); - if (cam->v4ldev) - video_device_release(cam->v4ldev); - mutex_unlock(&cam->dev_mutex); - v4l2_device_unregister(&cam->v4l2_dev); -fail0: - kfree(cam); - return err; -} - - -static void w9968cf_usb_disconnect(struct usb_interface* intf) -{ - struct w9968cf_device* cam = - (struct w9968cf_device*)usb_get_intfdata(intf); - - if (cam) { - down_write(&w9968cf_disconnect); - /* Prevent concurrent accesses to data */ - mutex_lock(&cam->dev_mutex); - - cam->disconnected = 1; - - DBG(2, "Disconnecting %s...", symbolic(camlist, cam->id)); - - v4l2_device_disconnect(&cam->v4l2_dev); - - wake_up_interruptible_all(&cam->open); - - if (cam->users) { - DBG(2, "The device is open (%s)! " - "Process name: %s. Deregistration and memory " - "deallocation are deferred on close.", - video_device_node_name(cam->v4ldev), cam->command) - cam->misconfigured = 1; - w9968cf_stop_transfer(cam); - wake_up_interruptible(&cam->wait_queue); - } else - w9968cf_release_resources(cam); - - mutex_unlock(&cam->dev_mutex); - up_write(&w9968cf_disconnect); - - if (!cam->users) { - kfree(cam); - } - } -} - - -static struct usb_driver w9968cf_usb_driver = { - .name = "w9968cf", - .id_table = winbond_id_table, - .probe = w9968cf_usb_probe, - .disconnect = w9968cf_usb_disconnect, -}; - - - -/**************************************************************************** - * Module init, exit and intermodule communication * - ****************************************************************************/ - -static int __init w9968cf_module_init(void) -{ - int err; - - KDBG(2, W9968CF_MODULE_NAME" "W9968CF_MODULE_VERSION) - KDBG(3, W9968CF_MODULE_AUTHOR) - - if ((err = usb_register(&w9968cf_usb_driver))) - return err; - - return 0; -} - - -static void __exit w9968cf_module_exit(void) -{ - /* w9968cf_usb_disconnect() will be called */ - usb_deregister(&w9968cf_usb_driver); - - KDBG(2, W9968CF_MODULE_NAME" deregistered") -} - - -module_init(w9968cf_module_init); -module_exit(w9968cf_module_exit); - diff --git a/drivers/media/video/w9968cf.h b/drivers/media/video/w9968cf.h deleted file mode 100644 index 73ad864b484..00000000000 --- a/drivers/media/video/w9968cf.h +++ /dev/null @@ -1,333 +0,0 @@ -/*************************************************************************** - * Video4Linux driver for W996[87]CF JPEG USB Dual Mode Camera Chip. * - * * - * Copyright (C) 2002-2004 by Luca Risolia <luca.risolia@studio.unibo.it> * - * * - * This program is free software; you can redistribute it and/or modify * - * it under the terms of the GNU General Public License as published by * - * the Free Software Foundation; either version 2 of the License, or * - * (at your option) any later version. * - * * - * This program is distributed in the hope that it will be useful, * - * but WITHOUT ANY WARRANTY; without even the implied warranty of * - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * - * GNU General Public License for more details. * - * * - * You should have received a copy of the GNU General Public License * - * along with this program; if not, write to the Free Software * - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. * - ***************************************************************************/ - -#ifndef _W9968CF_H_ -#define _W9968CF_H_ - -#include <linux/videodev2.h> -#include <linux/usb.h> -#include <linux/i2c.h> -#include <linux/device.h> -#include <linux/spinlock.h> -#include <linux/list.h> -#include <linux/wait.h> -#include <linux/param.h> -#include <linux/types.h> -#include <linux/rwsem.h> -#include <linux/mutex.h> - -#include <media/v4l2-device.h> -#include <media/ovcamchip.h> - -#include "w9968cf_vpp.h" - - -/**************************************************************************** - * Default values * - ****************************************************************************/ - -#define W9968CF_VPPMOD_LOAD 1 /* automatic 'w9968cf-vpp' module loading */ - -/* Comment/uncomment the following line to enable/disable debugging messages */ -#define W9968CF_DEBUG - -/* These have effect only if W9968CF_DEBUG is defined */ -#define W9968CF_DEBUG_LEVEL 2 /* from 0 to 6. 0 for no debug informations */ -#define W9968CF_SPECIFIC_DEBUG 0 /* 0 or 1 */ - -#define W9968CF_MAX_DEVICES 32 -#define W9968CF_SIMCAMS W9968CF_MAX_DEVICES /* simultaneous cameras */ - -#define W9968CF_MAX_BUFFERS 32 -#define W9968CF_BUFFERS 2 /* n. of frame buffers from 2 to MAX_BUFFERS */ - -/* Maximum data payload sizes in bytes for alternate settings */ -static const u16 wMaxPacketSize[] = {1023, 959, 895, 831, 767, 703, 639, 575, - 511, 447, 383, 319, 255, 191, 127, 63}; -#define W9968CF_PACKET_SIZE 1023 /* according to wMaxPacketSizes[] */ -#define W9968CF_MIN_PACKET_SIZE 63 /* minimum value */ -#define W9968CF_ISO_PACKETS 5 /* n.of packets for isochronous transfers */ -#define W9968CF_USB_CTRL_TIMEOUT 1000 /* timeout (ms) for usb control commands */ -#define W9968CF_URBS 2 /* n. of scheduled URBs for ISO transfer */ - -#define W9968CF_I2C_BUS_DELAY 4 /* delay in us for I2C bit r/w operations */ -#define W9968CF_I2C_RW_RETRIES 15 /* number of max I2C r/w retries */ - -/* Available video formats */ -struct w9968cf_format { - const u16 palette; - const u16 depth; - const u8 compression; -}; - -static const struct w9968cf_format w9968cf_formatlist[] = { - { VIDEO_PALETTE_UYVY, 16, 0 }, /* original video */ - { VIDEO_PALETTE_YUV422P, 16, 1 }, /* with JPEG compression */ - { VIDEO_PALETTE_YUV420P, 12, 1 }, /* with JPEG compression */ - { VIDEO_PALETTE_YUV420, 12, 1 }, /* same as YUV420P */ - { VIDEO_PALETTE_YUYV, 16, 0 }, /* software conversion */ - { VIDEO_PALETTE_YUV422, 16, 0 }, /* software conversion */ - { VIDEO_PALETTE_GREY, 8, 0 }, /* software conversion */ - { VIDEO_PALETTE_RGB555, 16, 0 }, /* software conversion */ - { VIDEO_PALETTE_RGB565, 16, 0 }, /* software conversion */ - { VIDEO_PALETTE_RGB24, 24, 0 }, /* software conversion */ - { VIDEO_PALETTE_RGB32, 32, 0 }, /* software conversion */ - { 0, 0, 0 } /* 0 is a terminating entry */ -}; - -#define W9968CF_DECOMPRESSION 2 /* decomp:0=disable,1=force,2=any formats */ -#define W9968CF_PALETTE_DECOMP_OFF VIDEO_PALETTE_UYVY /* when decomp=0 */ -#define W9968CF_PALETTE_DECOMP_FORCE VIDEO_PALETTE_YUV420P /* when decomp=1 */ -#define W9968CF_PALETTE_DECOMP_ON VIDEO_PALETTE_UYVY /* when decomp=2 */ - -#define W9968CF_FORCE_RGB 0 /* read RGB instead of BGR, yes=1/no=0 */ - -#define W9968CF_MAX_WIDTH 800 /* Has effect if up-scaling is on */ -#define W9968CF_MAX_HEIGHT 600 /* Has effect if up-scaling is on */ -#define W9968CF_WIDTH 320 /* from 128 to 352, multiple of 16 */ -#define W9968CF_HEIGHT 240 /* from 96 to 288, multiple of 16 */ - -#define W9968CF_CLAMPING 0 /* 0 disable, 1 enable video data clamping */ -#define W9968CF_FILTER_TYPE 0 /* 0 disable 1 (1-2-1), 2 (2-3-6-3-2) */ -#define W9968CF_DOUBLE_BUFFER 1 /* 0 disable, 1 enable double buffer */ -#define W9968CF_LARGEVIEW 1 /* 0 disable, 1 enable */ -#define W9968CF_UPSCALING 0 /* 0 disable, 1 enable */ - -#define W9968CF_MONOCHROME 0 /* 0 not monochrome, 1 monochrome sensor */ -#define W9968CF_BRIGHTNESS 31000 /* from 0 to 65535 */ -#define W9968CF_HUE 32768 /* from 0 to 65535 */ -#define W9968CF_COLOUR 32768 /* from 0 to 65535 */ -#define W9968CF_CONTRAST 50000 /* from 0 to 65535 */ -#define W9968CF_WHITENESS 32768 /* from 0 to 65535 */ - -#define W9968CF_AUTOBRIGHT 0 /* 0 disable, 1 enable automatic brightness */ -#define W9968CF_AUTOEXP 1 /* 0 disable, 1 enable automatic exposure */ -#define W9968CF_LIGHTFREQ 50 /* light frequency. 50Hz (Europe) or 60Hz */ -#define W9968CF_BANDINGFILTER 0 /* 0 disable, 1 enable banding filter */ -#define W9968CF_BACKLIGHT 0 /* 0 or 1, 1=object is lit from behind */ -#define W9968CF_MIRROR 0 /* 0 or 1 [don't] reverse image horizontally*/ - -#define W9968CF_CLOCKDIV -1 /* -1 = automatic clock divisor */ -#define W9968CF_DEF_CLOCKDIVISOR 0 /* default sensor clock divisor value */ - - -/**************************************************************************** - * Globals * - ****************************************************************************/ - -#define W9968CF_MODULE_NAME "V4L driver for W996[87]CF JPEG USB " \ - "Dual Mode Camera Chip" -#define W9968CF_MODULE_VERSION "1:1.34-basic" -#define W9968CF_MODULE_AUTHOR "(C) 2002-2004 Luca Risolia" -#define W9968CF_AUTHOR_EMAIL "<luca.risolia@studio.unibo.it>" -#define W9968CF_MODULE_LICENSE "GPL" - -static const struct usb_device_id winbond_id_table[] = { - { - /* Creative Labs Video Blaster WebCam Go Plus */ - USB_DEVICE(0x041e, 0x4003), - .driver_info = (unsigned long)"w9968cf", - }, - { - /* Generic W996[87]CF JPEG USB Dual Mode Camera */ - USB_DEVICE(0x1046, 0x9967), - .driver_info = (unsigned long)"w9968cf", - }, - { } /* terminating entry */ -}; - -/* W996[87]CF camera models, internal ids: */ -enum w9968cf_model_id { - W9968CF_MOD_GENERIC = 1, /* Generic W996[87]CF based device */ - W9968CF_MOD_CLVBWGP = 11,/*Creative Labs Video Blaster WebCam Go Plus*/ - W9968CF_MOD_ADPVDMA = 21, /* Aroma Digi Pen VGA Dual Mode ADG-5000 */ - W9986CF_MOD_AAU = 31, /* AVerMedia AVerTV USB */ - W9968CF_MOD_CLVBWG = 34, /* Creative Labs Video Blaster WebCam Go */ - W9968CF_MOD_LL = 37, /* Lebon LDC-035A */ - W9968CF_MOD_EEEMC = 40, /* Ezonics EZ-802 EZMega Cam */ - W9968CF_MOD_OOE = 42, /* OmniVision OV8610-EDE */ - W9968CF_MOD_ODPVDMPC = 43,/* OPCOM Digi Pen VGA Dual Mode Pen Camera */ - W9968CF_MOD_PDPII = 46, /* Pretec Digi Pen-II */ - W9968CF_MOD_PDP480 = 49, /* Pretec DigiPen-480 */ -}; - -enum w9968cf_frame_status { - F_READY, /* finished grabbing & ready to be read/synced */ - F_GRABBING, /* in the process of being grabbed into */ - F_ERROR, /* something bad happened while processing */ - F_UNUSED /* unused (no VIDIOCMCAPTURE) */ -}; - -struct w9968cf_frame_t { - void* buffer; - unsigned long size; - u32 length; - int number; - enum w9968cf_frame_status status; - struct w9968cf_frame_t* next; - u8 queued; -}; - -enum w9968cf_vpp_flag { - VPP_NONE = 0x00, - VPP_UPSCALE = 0x01, - VPP_SWAP_YUV_BYTES = 0x02, - VPP_DECOMPRESSION = 0x04, - VPP_UYVY_TO_RGBX = 0x08, -}; - -/* Main device driver structure */ -struct w9968cf_device { - enum w9968cf_model_id id; /* private device identifier */ - - struct v4l2_device v4l2_dev; - struct video_device* v4ldev; /* -> V4L structure */ - struct list_head v4llist; /* entry of the list of V4L cameras */ - - struct usb_device* usbdev; /* -> main USB structure */ - struct urb* urb[W9968CF_URBS]; /* -> USB request block structs */ - void* transfer_buffer[W9968CF_URBS]; /* -> ISO transfer buffers */ - u16* control_buffer; /* -> buffer for control req.*/ - u16* data_buffer; /* -> data to send to the FSB */ - - struct w9968cf_frame_t frame[W9968CF_MAX_BUFFERS]; - struct w9968cf_frame_t frame_tmp; /* temporary frame */ - struct w9968cf_frame_t frame_vpp; /* helper frame.*/ - struct w9968cf_frame_t* frame_current; /* -> frame being grabbed */ - struct w9968cf_frame_t* requested_frame[W9968CF_MAX_BUFFERS]; - - u8 max_buffers, /* number of requested buffers */ - force_palette, /* yes=1/no=0 */ - force_rgb, /* read RGB instead of BGR, yes=1, no=0 */ - double_buffer, /* hardware double buffering yes=1/no=0 */ - clamping, /* video data clamping yes=1/no=0 */ - filter_type, /* 0=disabled, 1=3 tap, 2=5 tap filter */ - capture, /* 0=disabled, 1=enabled */ - largeview, /* 0=disabled, 1=enabled */ - decompression, /* 0=disabled, 1=forced, 2=allowed */ - upscaling; /* software image scaling, 0=enabled, 1=disabled */ - - struct video_picture picture; /* current picture settings */ - struct video_window window; /* current window settings */ - - u16 hw_depth, /* depth (used by the chip) */ - hw_palette, /* palette (used by the chip) */ - hw_width, /* width (used by the chip) */ - hw_height, /* height (used by the chip) */ - hs_polarity, /* 0=negative sync pulse, 1=positive sync pulse */ - vs_polarity, /* 0=negative sync pulse, 1=positive sync pulse */ - start_cropx, /* pixels from HS inactive edge to 1st cropped pixel*/ - start_cropy; /* pixels from VS inactive edge to 1st cropped pixel*/ - - enum w9968cf_vpp_flag vpp_flag; /* post-processing routines in use */ - - u8 nbuffers, /* number of allocated frame buffers */ - altsetting, /* camera alternate setting */ - disconnected, /* flag: yes=1, no=0 */ - misconfigured, /* flag: yes=1, no=0 */ - users, /* flag: number of users holding the device */ - streaming; /* flag: yes=1, no=0 */ - - u8 sensor_initialized; /* flag: yes=1, no=0 */ - - /* Determined by the image sensor type: */ - int sensor, /* type of image sensor chip (CC_*) */ - monochrome; /* image sensor is (probably) monochrome */ - u16 maxwidth, /* maximum width supported by the image sensor */ - maxheight, /* maximum height supported by the image sensor */ - minwidth, /* minimum width supported by the image sensor */ - minheight; /* minimum height supported by the image sensor */ - u8 auto_brt, /* auto brightness enabled flag */ - auto_exp, /* auto exposure enabled flag */ - backlight, /* backlight exposure algorithm flag */ - mirror, /* image is reversed horizontally */ - lightfreq, /* power (lighting) frequency */ - bandfilt; /* banding filter enabled flag */ - s8 clockdiv; /* clock divisor */ - - /* I2C interface to kernel */ - struct i2c_adapter i2c_adapter; - struct v4l2_subdev *sensor_sd; - - /* Locks */ - struct mutex dev_mutex, /* for probe, disconnect,open and close */ - fileop_mutex; /* for read and ioctl */ - spinlock_t urb_lock, /* for submit_urb() and unlink_urb() */ - flist_lock; /* for requested frame list accesses */ - wait_queue_head_t open, wait_queue; - - char command[16]; /* name of the program holding the device */ -}; - -static inline struct w9968cf_device *to_cam(struct v4l2_device *v4l2_dev) -{ - return container_of(v4l2_dev, struct w9968cf_device, v4l2_dev); -} - - -/**************************************************************************** - * Macros for debugging * - ****************************************************************************/ - -#undef DBG -#undef KDBG -#ifdef W9968CF_DEBUG -/* For device specific debugging messages */ -# define DBG(level, fmt, args...) \ -{ \ - if ( ((specific_debug) && (debug == (level))) || \ - ((!specific_debug) && (debug >= (level))) ) { \ - if ((level) == 1) \ - v4l2_err(&cam->v4l2_dev, fmt "\n", ## args); \ - else if ((level) == 2 || (level) == 3) \ - v4l2_info(&cam->v4l2_dev, fmt "\n", ## args); \ - else if ((level) == 4) \ - v4l2_warn(&cam->v4l2_dev, fmt "\n", ## args); \ - else if ((level) >= 5) \ - v4l2_info(&cam->v4l2_dev, "[%s:%d] " fmt "\n", \ - __func__, __LINE__ , ## args); \ - } \ -} -/* For generic kernel (not device specific) messages */ -# define KDBG(level, fmt, args...) \ -{ \ - if ( ((specific_debug) && (debug == (level))) || \ - ((!specific_debug) && (debug >= (level))) ) { \ - if ((level) >= 1 && (level) <= 4) \ - pr_info("w9968cf: " fmt "\n", ## args); \ - else if ((level) >= 5) \ - pr_debug("w9968cf: [%s:%d] " fmt "\n", __func__, \ - __LINE__ , ## args); \ - } \ -} -#else - /* Not debugging: nothing */ -# define DBG(level, fmt, args...) do {;} while(0); -# define KDBG(level, fmt, args...) do {;} while(0); -#endif - -#undef PDBG -#define PDBG(fmt, args...) \ -v4l2_info(&cam->v4l2_dev, "[%s:%d] " fmt "\n", __func__, __LINE__ , ## args); - -#undef PDBGG -#define PDBGG(fmt, args...) do {;} while(0); /* nothing: it's a placeholder */ - -#endif /* _W9968CF_H_ */ diff --git a/drivers/media/video/w9968cf_decoder.h b/drivers/media/video/w9968cf_decoder.h deleted file mode 100644 index 59decbfc540..00000000000 --- a/drivers/media/video/w9968cf_decoder.h +++ /dev/null @@ -1,86 +0,0 @@ -/*************************************************************************** - * Video decoder for the W996[87]CF driver for Linux. * - * * - * Copyright (C) 2003 2004 by Luca Risolia <luca.risolia@studio.unibo.it> * - * * - * This program is free software; you can redistribute it and/or modify * - * it under the terms of the GNU General Public License as published by * - * the Free Software Foundation; either version 2 of the License, or * - * (at your option) any later version. * - * * - * This program is distributed in the hope that it will be useful, * - * but WITHOUT ANY WARRANTY; without even the implied warranty of * - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * - * GNU General Public License for more details. * - * * - * You should have received a copy of the GNU General Public License * - * along with this program; if not, write to the Free Software * - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. * - ***************************************************************************/ - -#ifndef _W9968CF_DECODER_H_ -#define _W9968CF_DECODER_H_ - -/* Comment/uncomment this for high/low quality of compressed video */ -#define W9968CF_DEC_FAST_LOWQUALITY_VIDEO - -#ifdef W9968CF_DEC_FAST_LOWQUALITY_VIDEO -static const unsigned char Y_QUANTABLE[64] = { - 16, 11, 10, 16, 24, 40, 51, 61, - 12, 12, 14, 19, 26, 58, 60, 55, - 14, 13, 16, 24, 40, 57, 69, 56, - 14, 17, 22, 29, 51, 87, 80, 62, - 18, 22, 37, 56, 68, 109, 103, 77, - 24, 35, 55, 64, 81, 104, 113, 92, - 49, 64, 78, 87, 103, 121, 120, 101, - 72, 92, 95, 98, 112, 100, 103, 99 -}; - -static const unsigned char UV_QUANTABLE[64] = { - 17, 18, 24, 47, 99, 99, 99, 99, - 18, 21, 26, 66, 99, 99, 99, 99, - 24, 26, 56, 99, 99, 99, 99, 99, - 47, 66, 99, 99, 99, 99, 99, 99, - 99, 99, 99, 99, 99, 99, 99, 99, - 99, 99, 99, 99, 99, 99, 99, 99, - 99, 99, 99, 99, 99, 99, 99, 99, - 99, 99, 99, 99, 99, 99, 99, 99 -}; -#else -static const unsigned char Y_QUANTABLE[64] = { - 8, 5, 5, 8, 12, 20, 25, 30, - 6, 6, 7, 9, 13, 29, 30, 27, - 7, 6, 8, 12, 20, 28, 34, 28, - 7, 8, 11, 14, 25, 43, 40, 31, - 9, 11, 18, 28, 34, 54, 51, 38, - 12, 17, 27, 32, 40, 52, 56, 46, - 24, 32, 39, 43, 51, 60, 60, 50, - 36, 46, 47, 49, 56, 50, 51, 49 -}; - -static const unsigned char UV_QUANTABLE[64] = { - 8, 9, 12, 23, 49, 49, 49, 49, - 9, 10, 13, 33, 49, 49, 49, 49, - 12, 13, 28, 49, 49, 49, 49, 49, - 23, 33, 49, 49, 49, 49, 49, 49, - 49, 49, 49, 49, 49, 49, 49, 49, - 49, 49, 49, 49, 49, 49, 49, 49, - 49, 49, 49, 49, 49, 49, 49, 49, - 49, 49, 49, 49, 49, 49, 49, 49 -}; -#endif - -#define W9968CF_DEC_ERR_CORRUPTED_DATA -1 -#define W9968CF_DEC_ERR_BUF_OVERFLOW -2 -#define W9968CF_DEC_ERR_NO_SOI -3 -#define W9968CF_DEC_ERR_NO_SOF0 -4 -#define W9968CF_DEC_ERR_NO_SOS -5 -#define W9968CF_DEC_ERR_NO_EOI -6 - -extern void w9968cf_init_decoder(void); -extern int w9968cf_check_headers(const unsigned char* Pin, - const unsigned long BUF_SIZE); -extern int w9968cf_decode(const char* Pin, const unsigned long BUF_SIZE, - const unsigned W, const unsigned H, char* Pout); - -#endif /* _W9968CF_DECODER_H_ */ diff --git a/drivers/media/video/w9968cf_vpp.h b/drivers/media/video/w9968cf_vpp.h deleted file mode 100644 index 88c9b6c0cc3..00000000000 --- a/drivers/media/video/w9968cf_vpp.h +++ /dev/null @@ -1,40 +0,0 @@ -/*************************************************************************** - * Interface for video post-processing functions for the W996[87]CF driver * - * for Linux. * - * * - * Copyright (C) 2002-2004 by Luca Risolia <luca.risolia@studio.unibo.it> * - * * - * This program is free software; you can redistribute it and/or modify * - * it under the terms of the GNU General Public License as published by * - * the Free Software Foundation; either version 2 of the License, or * - * (at your option) any later version. * - * * - * This program is distributed in the hope that it will be useful, * - * but WITHOUT ANY WARRANTY; without even the implied warranty of * - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * - * GNU General Public License for more details. * - * * - * You should have received a copy of the GNU General Public License * - * along with this program; if not, write to the Free Software * - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. * - ***************************************************************************/ - -#ifndef _W9968CF_VPP_H_ -#define _W9968CF_VPP_H_ - -#include <linux/module.h> -#include <asm/types.h> - -struct w9968cf_vpp_t { - struct module* owner; - int (*check_headers)(const unsigned char*, const unsigned long); - int (*decode)(const char*, const unsigned long, const unsigned, - const unsigned, char*); - void (*swap_yuvbytes)(void*, unsigned long); - void (*uyvy_to_rgbx)(u8*, unsigned long, u8*, u16, u8); - void (*scale_up)(u8*, u8*, u16, u16, u16, u16, u16); - - u8 busy; /* read-only flag: module is/is not in use */ -}; - -#endif /* _W9968CF_VPP_H_ */ diff --git a/drivers/media/video/zc0301/Kconfig b/drivers/media/video/zc0301/Kconfig deleted file mode 100644 index a7e610e0be9..00000000000 --- a/drivers/media/video/zc0301/Kconfig +++ /dev/null @@ -1,15 +0,0 @@ -config USB_ZC0301 - tristate "USB ZC0301[P] webcam support (DEPRECATED)" - depends on VIDEO_V4L2 - default n - ---help--- - This driver is DEPRECATED please use the gspca zc3xx module - instead. - - Say Y here if you want support for cameras based on the ZC0301 or - ZC0301P Image Processors and Control Chips. - - See <file:Documentation/video4linux/zc0301.txt> for more info. - - To compile this driver as a module, choose M here: the - module will be called zc0301. diff --git a/drivers/media/video/zc0301/Makefile b/drivers/media/video/zc0301/Makefile deleted file mode 100644 index d9e6d97fade..00000000000 --- a/drivers/media/video/zc0301/Makefile +++ /dev/null @@ -1,3 +0,0 @@ -zc0301-objs := zc0301_core.o zc0301_pb0330.o zc0301_pas202bcb.o - -obj-$(CONFIG_USB_ZC0301) += zc0301.o diff --git a/drivers/media/video/zc0301/zc0301.h b/drivers/media/video/zc0301/zc0301.h deleted file mode 100644 index b1b5cceb4ba..00000000000 --- a/drivers/media/video/zc0301/zc0301.h +++ /dev/null @@ -1,196 +0,0 @@ -/*************************************************************************** - * V4L2 driver for ZC0301[P] Image Processor and Control Chip * - * * - * Copyright (C) 2006-2007 by Luca Risolia <luca.risolia@studio.unibo.it> * - * * - * This program is free software; you can redistribute it and/or modify * - * it under the terms of the GNU General Public License as published by * - * the Free Software Foundation; either version 2 of the License, or * - * (at your option) any later version. * - * * - * This program is distributed in the hope that it will be useful, * - * but WITHOUT ANY WARRANTY; without even the implied warranty of * - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * - * GNU General Public License for more details. * - * * - * You should have received a copy of the GNU General Public License * - * along with this program; if not, write to the Free Software * - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. * - ***************************************************************************/ - -#ifndef _ZC0301_H_ -#define _ZC0301_H_ - -#include <linux/version.h> -#include <linux/usb.h> -#include <linux/videodev2.h> -#include <media/v4l2-common.h> -#include <media/v4l2-ioctl.h> -#include <linux/device.h> -#include <linux/list.h> -#include <linux/spinlock.h> -#include <linux/time.h> -#include <linux/wait.h> -#include <linux/types.h> -#include <linux/param.h> -#include <linux/mutex.h> -#include <linux/rwsem.h> -#include <linux/stddef.h> -#include <linux/string.h> -#include <linux/kref.h> - -#include "zc0301_sensor.h" - -/*****************************************************************************/ - -#define ZC0301_DEBUG -#define ZC0301_DEBUG_LEVEL 2 -#define ZC0301_MAX_DEVICES 64 -#define ZC0301_FORCE_MUNMAP 0 -#define ZC0301_MAX_FRAMES 32 -#define ZC0301_COMPRESSION_QUALITY 0 -#define ZC0301_URBS 2 -#define ZC0301_ISO_PACKETS 7 -#define ZC0301_ALTERNATE_SETTING 7 -#define ZC0301_URB_TIMEOUT msecs_to_jiffies(2 * ZC0301_ISO_PACKETS) -#define ZC0301_CTRL_TIMEOUT 100 -#define ZC0301_FRAME_TIMEOUT 2 - -/*****************************************************************************/ - -ZC0301_ID_TABLE -ZC0301_SENSOR_TABLE - -enum zc0301_frame_state { - F_UNUSED, - F_QUEUED, - F_GRABBING, - F_DONE, - F_ERROR, -}; - -struct zc0301_frame_t { - void* bufmem; - struct v4l2_buffer buf; - enum zc0301_frame_state state; - struct list_head frame; - unsigned long vma_use_count; -}; - -enum zc0301_dev_state { - DEV_INITIALIZED = 0x01, - DEV_DISCONNECTED = 0x02, - DEV_MISCONFIGURED = 0x04, -}; - -enum zc0301_io_method { - IO_NONE, - IO_READ, - IO_MMAP, -}; - -enum zc0301_stream_state { - STREAM_OFF, - STREAM_INTERRUPT, - STREAM_ON, -}; - -struct zc0301_module_param { - u8 force_munmap; - u16 frame_timeout; -}; - -static DECLARE_RWSEM(zc0301_dev_lock); - -struct zc0301_device { - struct video_device* v4ldev; - - struct zc0301_sensor sensor; - - struct usb_device* usbdev; - struct urb* urb[ZC0301_URBS]; - void* transfer_buffer[ZC0301_URBS]; - u8* control_buffer; - - struct zc0301_frame_t *frame_current, frame[ZC0301_MAX_FRAMES]; - struct list_head inqueue, outqueue; - u32 frame_count, nbuffers, nreadbuffers; - - enum zc0301_io_method io; - enum zc0301_stream_state stream; - - struct v4l2_jpegcompression compression; - - struct zc0301_module_param module_param; - - struct kref kref; - enum zc0301_dev_state state; - u8 users; - - struct completion probe; - struct mutex open_mutex, fileop_mutex; - spinlock_t queue_lock; - wait_queue_head_t wait_open, wait_frame, wait_stream; -}; - -/*****************************************************************************/ - -struct zc0301_device* -zc0301_match_id(struct zc0301_device* cam, const struct usb_device_id *id) -{ - return usb_match_id(usb_ifnum_to_if(cam->usbdev, 0), id) ? cam : NULL; -} - -void -zc0301_attach_sensor(struct zc0301_device* cam, struct zc0301_sensor* sensor) -{ - memcpy(&cam->sensor, sensor, sizeof(struct zc0301_sensor)); -} - -/*****************************************************************************/ - -#undef DBG -#undef KDBG -#ifdef ZC0301_DEBUG -# define DBG(level, fmt, args...) \ -do { \ - if (debug >= (level)) { \ - if ((level) == 1) \ - dev_err(&cam->usbdev->dev, fmt "\n", ## args); \ - else if ((level) == 2) \ - dev_info(&cam->usbdev->dev, fmt "\n", ## args); \ - else if ((level) >= 3) \ - dev_info(&cam->usbdev->dev, "[%s:%s:%d] " fmt "\n", \ - __FILE__, __func__, __LINE__ , ## args); \ - } \ -} while (0) -# define KDBG(level, fmt, args...) \ -do { \ - if (debug >= (level)) { \ - if ((level) == 1 || (level) == 2) \ - pr_info("zc0301: " fmt "\n", ## args); \ - else if ((level) == 3) \ - pr_debug("sn9c102: [%s:%s:%d] " fmt "\n", __FILE__, \ - __func__, __LINE__ , ## args); \ - } \ -} while (0) -# define V4LDBG(level, name, cmd) \ -do { \ - if (debug >= (level)) \ - v4l_print_ioctl(name, cmd); \ -} while (0) -#else -# define DBG(level, fmt, args...) do {;} while(0) -# define KDBG(level, fmt, args...) do {;} while(0) -# define V4LDBG(level, name, cmd) do {;} while(0) -#endif - -#undef PDBG -#define PDBG(fmt, args...) \ -dev_info(&cam->usbdev->dev, "[%s:%s:%d] " fmt "\n", __FILE__, __func__, \ - __LINE__ , ## args) - -#undef PDBGG -#define PDBGG(fmt, args...) do {;} while(0) /* placeholder */ - -#endif /* _ZC0301_H_ */ diff --git a/drivers/media/video/zc0301/zc0301_core.c b/drivers/media/video/zc0301/zc0301_core.c deleted file mode 100644 index bb51cfb0c64..00000000000 --- a/drivers/media/video/zc0301/zc0301_core.c +++ /dev/null @@ -1,2098 +0,0 @@ -/*************************************************************************** - * Video4Linux2 driver for ZC0301[P] Image Processor and Control Chip * - * * - * Copyright (C) 2006-2007 by Luca Risolia <luca.risolia@studio.unibo.it> * - * * - * Informations about the chip internals needed to enable the I2C protocol * - * have been taken from the documentation of the ZC030x Video4Linux1 * - * driver written by Andrew Birkett <andy@nobugs.org> * - * * - * This program is free software; you can redistribute it and/or modify * - * it under the terms of the GNU General Public License as published by * - * the Free Software Foundation; either version 2 of the License, or * - * (at your option) any later version. * - * * - * This program is distributed in the hope that it will be useful, * - * but WITHOUT ANY WARRANTY; without even the implied warranty of * - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * - * GNU General Public License for more details. * - * * - * You should have received a copy of the GNU General Public License * - * along with this program; if not, write to the Free Software * - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. * - ***************************************************************************/ - -#include <linux/module.h> -#include <linux/init.h> -#include <linux/kernel.h> -#include <linux/param.h> -#include <linux/errno.h> -#include <linux/slab.h> -#include <linux/device.h> -#include <linux/fs.h> -#include <linux/delay.h> -#include <linux/compiler.h> -#include <linux/ioctl.h> -#include <linux/poll.h> -#include <linux/stat.h> -#include <linux/mm.h> -#include <linux/vmalloc.h> -#include <linux/page-flags.h> -#include <asm/byteorder.h> -#include <asm/page.h> -#include <asm/uaccess.h> - -#include "zc0301.h" - -/*****************************************************************************/ - -#define ZC0301_MODULE_NAME "V4L2 driver for ZC0301[P] " \ - "Image Processor and Control Chip" -#define ZC0301_MODULE_AUTHOR "(C) 2006-2007 Luca Risolia" -#define ZC0301_AUTHOR_EMAIL "<luca.risolia@studio.unibo.it>" -#define ZC0301_MODULE_LICENSE "GPL" -#define ZC0301_MODULE_VERSION "1:1.10" -#define ZC0301_MODULE_VERSION_CODE KERNEL_VERSION(1, 1, 10) - -/*****************************************************************************/ - -MODULE_DEVICE_TABLE(usb, zc0301_id_table); - -MODULE_AUTHOR(ZC0301_MODULE_AUTHOR " " ZC0301_AUTHOR_EMAIL); -MODULE_DESCRIPTION(ZC0301_MODULE_NAME); -MODULE_VERSION(ZC0301_MODULE_VERSION); -MODULE_LICENSE(ZC0301_MODULE_LICENSE); - -static short video_nr[] = {[0 ... ZC0301_MAX_DEVICES-1] = -1}; -module_param_array(video_nr, short, NULL, 0444); -MODULE_PARM_DESC(video_nr, - "\n<-1|n[,...]> Specify V4L2 minor mode number." - "\n -1 = use next available (default)" - "\n n = use minor number n (integer >= 0)" - "\nYou can specify up to " - __MODULE_STRING(ZC0301_MAX_DEVICES) " cameras this way." - "\nFor example:" - "\nvideo_nr=-1,2,-1 would assign minor number 2 to" - "\nthe second registered camera and use auto for the first" - "\none and for every other camera." - "\n"); - -static short force_munmap[] = {[0 ... ZC0301_MAX_DEVICES-1] = - ZC0301_FORCE_MUNMAP}; -module_param_array(force_munmap, bool, NULL, 0444); -MODULE_PARM_DESC(force_munmap, - "\n<0|1[,...]> Force the application to unmap previously" - "\nmapped buffer memory before calling any VIDIOC_S_CROP or" - "\nVIDIOC_S_FMT ioctl's. Not all the applications support" - "\nthis feature. This parameter is specific for each" - "\ndetected camera." - "\n 0 = do not force memory unmapping" - "\n 1 = force memory unmapping (save memory)" - "\nDefault value is "__MODULE_STRING(ZC0301_FORCE_MUNMAP)"." - "\n"); - -static unsigned int frame_timeout[] = {[0 ... ZC0301_MAX_DEVICES-1] = - ZC0301_FRAME_TIMEOUT}; -module_param_array(frame_timeout, uint, NULL, 0644); -MODULE_PARM_DESC(frame_timeout, - "\n<n[,...]> Timeout for a video frame in seconds." - "\nThis parameter is specific for each detected camera." - "\nDefault value is "__MODULE_STRING(ZC0301_FRAME_TIMEOUT)"." - "\n"); - -#ifdef ZC0301_DEBUG -static unsigned short debug = ZC0301_DEBUG_LEVEL; -module_param(debug, ushort, 0644); -MODULE_PARM_DESC(debug, - "\n<n> Debugging information level, from 0 to 3:" - "\n0 = none (use carefully)" - "\n1 = critical errors" - "\n2 = significant informations" - "\n3 = more verbose messages" - "\nLevel 3 is useful for testing only, when only " - "one device is used." - "\nDefault value is "__MODULE_STRING(ZC0301_DEBUG_LEVEL)"." - "\n"); -#endif - -/*****************************************************************************/ - -static u32 -zc0301_request_buffers(struct zc0301_device* cam, u32 count, - enum zc0301_io_method io) -{ - struct v4l2_pix_format* p = &(cam->sensor.pix_format); - struct v4l2_rect* r = &(cam->sensor.cropcap.bounds); - const size_t imagesize = cam->module_param.force_munmap || - io == IO_READ ? - (p->width * p->height * p->priv) / 8 : - (r->width * r->height * p->priv) / 8; - void* buff = NULL; - u32 i; - - if (count > ZC0301_MAX_FRAMES) - count = ZC0301_MAX_FRAMES; - - cam->nbuffers = count; - while (cam->nbuffers > 0) { - if ((buff = vmalloc_32_user(cam->nbuffers * - PAGE_ALIGN(imagesize)))) - break; - cam->nbuffers--; - } - - for (i = 0; i < cam->nbuffers; i++) { - cam->frame[i].bufmem = buff + i*PAGE_ALIGN(imagesize); - cam->frame[i].buf.index = i; - cam->frame[i].buf.m.offset = i*PAGE_ALIGN(imagesize); - cam->frame[i].buf.length = imagesize; - cam->frame[i].buf.type = V4L2_BUF_TYPE_VIDEO_CAPTURE; - cam->frame[i].buf.sequence = 0; - cam->frame[i].buf.field = V4L2_FIELD_NONE; - cam->frame[i].buf.memory = V4L2_MEMORY_MMAP; - cam->frame[i].buf.flags = 0; - } - - return cam->nbuffers; -} - - -static void zc0301_release_buffers(struct zc0301_device* cam) -{ - if (cam->nbuffers) { - vfree(cam->frame[0].bufmem); - cam->nbuffers = 0; - } - cam->frame_current = NULL; -} - - -static void zc0301_empty_framequeues(struct zc0301_device* cam) -{ - u32 i; - - INIT_LIST_HEAD(&cam->inqueue); - INIT_LIST_HEAD(&cam->outqueue); - - for (i = 0; i < ZC0301_MAX_FRAMES; i++) { - cam->frame[i].state = F_UNUSED; - cam->frame[i].buf.bytesused = 0; - } -} - - -static void zc0301_requeue_outqueue(struct zc0301_device* cam) -{ - struct zc0301_frame_t *i; - - list_for_each_entry(i, &cam->outqueue, frame) { - i->state = F_QUEUED; - list_add(&i->frame, &cam->inqueue); - } - - INIT_LIST_HEAD(&cam->outqueue); -} - - -static void zc0301_queue_unusedframes(struct zc0301_device* cam) -{ - unsigned long lock_flags; - u32 i; - - for (i = 0; i < cam->nbuffers; i++) - if (cam->frame[i].state == F_UNUSED) { - cam->frame[i].state = F_QUEUED; - spin_lock_irqsave(&cam->queue_lock, lock_flags); - list_add_tail(&cam->frame[i].frame, &cam->inqueue); - spin_unlock_irqrestore(&cam->queue_lock, lock_flags); - } -} - -/*****************************************************************************/ - -int zc0301_write_reg(struct zc0301_device* cam, u16 index, u16 value) -{ - struct usb_device* udev = cam->usbdev; - int res; - - res = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), 0xa0, 0x40, - value, index, NULL, 0, ZC0301_CTRL_TIMEOUT); - if (res < 0) { - DBG(3, "Failed to write a register (index 0x%04X, " - "value 0x%02X, error %d)",index, value, res); - return -1; - } - - return 0; -} - - -int zc0301_read_reg(struct zc0301_device* cam, u16 index) -{ - struct usb_device* udev = cam->usbdev; - u8* buff = cam->control_buffer; - int res; - - res = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0), 0xa1, 0xc0, - 0x0001, index, buff, 1, ZC0301_CTRL_TIMEOUT); - if (res < 0) - DBG(3, "Failed to read a register (index 0x%04X, error %d)", - index, res); - - PDBGG("Read: index 0x%04X, value: 0x%04X", index, (int)(*buff)); - - return (res >= 0) ? (int)(*buff) : -1; -} - - -int zc0301_i2c_read(struct zc0301_device* cam, u16 address, u8 length) -{ - int err = 0, res, r0, r1; - - err += zc0301_write_reg(cam, 0x0092, address); - err += zc0301_write_reg(cam, 0x0090, 0x02); - - msleep(1); - - res = zc0301_read_reg(cam, 0x0091); - if (res < 0) - err += res; - r0 = zc0301_read_reg(cam, 0x0095); - if (r0 < 0) - err += r0; - r1 = zc0301_read_reg(cam, 0x0096); - if (r1 < 0) - err += r1; - - res = (length <= 1) ? r0 : r0 | (r1 << 8); - - if (err) - DBG(3, "I2C read failed at address 0x%04X, value: 0x%04X", - address, res); - - - PDBGG("I2C read: address 0x%04X, value: 0x%04X", address, res); - - return err ? -1 : res; -} - - -int zc0301_i2c_write(struct zc0301_device* cam, u16 address, u16 value) -{ - int err = 0, res; - - err += zc0301_write_reg(cam, 0x0092, address); - err += zc0301_write_reg(cam, 0x0093, value & 0xff); - err += zc0301_write_reg(cam, 0x0094, value >> 8); - err += zc0301_write_reg(cam, 0x0090, 0x01); - - msleep(1); - - res = zc0301_read_reg(cam, 0x0091); - if (res < 0) - err += res; - - if (err) - DBG(3, "I2C write failed at address 0x%04X, value: 0x%04X", - address, value); - - PDBGG("I2C write: address 0x%04X, value: 0x%04X", address, value); - - return err ? -1 : 0; -} - -/*****************************************************************************/ - -static void zc0301_urb_complete(struct urb *urb) -{ - struct zc0301_device* cam = urb->context; - struct zc0301_frame_t** f; - size_t imagesize; - u8 i; - int err = 0; - - if (urb->status == -ENOENT) - return; - - f = &cam->frame_current; - - if (cam->stream == STREAM_INTERRUPT) { - cam->stream = STREAM_OFF; - if ((*f)) - (*f)->state = F_QUEUED; - DBG(3, "Stream interrupted"); - wake_up(&cam->wait_stream); - } - - if (cam->state & DEV_DISCONNECTED) - return; - - if (cam->state & DEV_MISCONFIGURED) { - wake_up_interruptible(&cam->wait_frame); - return; - } - - if (cam->stream == STREAM_OFF || list_empty(&cam->inqueue)) - goto resubmit_urb; - - if (!(*f)) - (*f) = list_entry(cam->inqueue.next, struct zc0301_frame_t, - frame); - - imagesize = (cam->sensor.pix_format.width * - cam->sensor.pix_format.height * - cam->sensor.pix_format.priv) / 8; - - for (i = 0; i < urb->number_of_packets; i++) { - unsigned int len, status; - void *pos; - u16* soi; - u8 sof; - - len = urb->iso_frame_desc[i].actual_length; - status = urb->iso_frame_desc[i].status; - pos = urb->iso_frame_desc[i].offset + urb->transfer_buffer; - - if (status) { - DBG(3, "Error in isochronous frame"); - (*f)->state = F_ERROR; - continue; - } - - sof = (*(soi = pos) == 0xd8ff); - - PDBGG("Isochrnous frame: length %u, #%u i,", len, i); - - if ((*f)->state == F_QUEUED || (*f)->state == F_ERROR) -start_of_frame: - if (sof) { - (*f)->state = F_GRABBING; - (*f)->buf.bytesused = 0; - do_gettimeofday(&(*f)->buf.timestamp); - DBG(3, "SOF detected: new video frame"); - } - - if ((*f)->state == F_GRABBING) { - if (sof && (*f)->buf.bytesused) - goto end_of_frame; - - if ((*f)->buf.bytesused + len > imagesize) { - DBG(3, "Video frame size exceeded"); - (*f)->state = F_ERROR; - continue; - } - - memcpy((*f)->bufmem+(*f)->buf.bytesused, pos, len); - (*f)->buf.bytesused += len; - - if ((*f)->buf.bytesused == imagesize) { - u32 b; -end_of_frame: - b = (*f)->buf.bytesused; - (*f)->state = F_DONE; - (*f)->buf.sequence= ++cam->frame_count; - spin_lock(&cam->queue_lock); - list_move_tail(&(*f)->frame, &cam->outqueue); - if (!list_empty(&cam->inqueue)) - (*f) = list_entry(cam->inqueue.next, - struct zc0301_frame_t, - frame); - else - (*f) = NULL; - spin_unlock(&cam->queue_lock); - DBG(3, "Video frame captured: : %lu bytes", - (unsigned long)(b)); - - if (!(*f)) - goto resubmit_urb; - - if (sof) - goto start_of_frame; - } - } - } - -resubmit_urb: - urb->dev = cam->usbdev; - err = usb_submit_urb(urb, GFP_ATOMIC); - if (err < 0 && err != -EPERM) { - cam->state |= DEV_MISCONFIGURED; - DBG(1, "usb_submit_urb() failed"); - } - - wake_up_interruptible(&cam->wait_frame); -} - - -static int zc0301_start_transfer(struct zc0301_device* cam) -{ - struct usb_device *udev = cam->usbdev; - struct usb_host_interface* altsetting = usb_altnum_to_altsetting( - usb_ifnum_to_if(udev, 0), - ZC0301_ALTERNATE_SETTING); - const unsigned int psz = le16_to_cpu(altsetting-> - endpoint[0].desc.wMaxPacketSize); - struct urb* urb; - s8 i, j; - int err = 0; - - for (i = 0; i < ZC0301_URBS; i++) { - cam->transfer_buffer[i] = kzalloc(ZC0301_ISO_PACKETS * psz, - GFP_KERNEL); - if (!cam->transfer_buffer[i]) { - err = -ENOMEM; - DBG(1, "Not enough memory"); - goto free_buffers; - } - } - - for (i = 0; i < ZC0301_URBS; i++) { - urb = usb_alloc_urb(ZC0301_ISO_PACKETS, GFP_KERNEL); - cam->urb[i] = urb; - if (!urb) { - err = -ENOMEM; - DBG(1, "usb_alloc_urb() failed"); - goto free_urbs; - } - urb->dev = udev; - urb->context = cam; - urb->pipe = usb_rcvisocpipe(udev, 1); - urb->transfer_flags = URB_ISO_ASAP; - urb->number_of_packets = ZC0301_ISO_PACKETS; - urb->complete = zc0301_urb_complete; - urb->transfer_buffer = cam->transfer_buffer[i]; - urb->transfer_buffer_length = psz * ZC0301_ISO_PACKETS; - urb->interval = 1; - for (j = 0; j < ZC0301_ISO_PACKETS; j++) { - urb->iso_frame_desc[j].offset = psz * j; - urb->iso_frame_desc[j].length = psz; - } - } - - err = usb_set_interface(udev, 0, ZC0301_ALTERNATE_SETTING); - if (err) { - DBG(1, "usb_set_interface() failed"); - goto free_urbs; - } - - cam->frame_current = NULL; - - for (i = 0; i < ZC0301_URBS; i++) { - err = usb_submit_urb(cam->urb[i], GFP_KERNEL); - if (err) { - for (j = i-1; j >= 0; j--) - usb_kill_urb(cam->urb[j]); - DBG(1, "usb_submit_urb() failed, error %d", err); - goto free_urbs; - } - } - - return 0; - -free_urbs: - for (i = 0; (i < ZC0301_URBS) && cam->urb[i]; i++) - usb_free_urb(cam->urb[i]); - -free_buffers: - for (i = 0; (i < ZC0301_URBS) && cam->transfer_buffer[i]; i++) - kfree(cam->transfer_buffer[i]); - - return err; -} - - -static int zc0301_stop_transfer(struct zc0301_device* cam) -{ - struct usb_device *udev = cam->usbdev; - s8 i; - int err = 0; - - if (cam->state & DEV_DISCONNECTED) - return 0; - - for (i = ZC0301_URBS-1; i >= 0; i--) { - usb_kill_urb(cam->urb[i]); - usb_free_urb(cam->urb[i]); - kfree(cam->transfer_buffer[i]); - } - - err = usb_set_interface(udev, 0, 0); /* 0 Mb/s */ - if (err) - DBG(3, "usb_set_interface() failed"); - - return err; -} - - -static int zc0301_stream_interrupt(struct zc0301_device* cam) -{ - long timeout; - - cam->stream = STREAM_INTERRUPT; - timeout = wait_event_timeout(cam->wait_stream, - (cam->stream == STREAM_OFF) || - (cam->state & DEV_DISCONNECTED), - ZC0301_URB_TIMEOUT); - if (cam->state & DEV_DISCONNECTED) - return -ENODEV; - else if (cam->stream != STREAM_OFF) { - cam->state |= DEV_MISCONFIGURED; - DBG(1, "URB timeout reached. The camera is misconfigured. To " - "use it, close and open %s again.", - video_device_node_name(cam->v4ldev)); - return -EIO; - } - - return 0; -} - -/*****************************************************************************/ - -static int -zc0301_set_compression(struct zc0301_device* cam, - struct v4l2_jpegcompression* compression) -{ - int r, err = 0; - - if ((r = zc0301_read_reg(cam, 0x0008)) < 0) - err += r; - err += zc0301_write_reg(cam, 0x0008, r | 0x11 | compression->quality); - - return err ? -EIO : 0; -} - - -static int zc0301_init(struct zc0301_device* cam) -{ - struct zc0301_sensor* s = &cam->sensor; - struct v4l2_control ctrl; - struct v4l2_queryctrl *qctrl; - struct v4l2_rect* rect; - u8 i = 0; - int err = 0; - - if (!(cam->state & DEV_INITIALIZED)) { - mutex_init(&cam->open_mutex); - init_waitqueue_head(&cam->wait_open); - qctrl = s->qctrl; - rect = &(s->cropcap.defrect); - cam->compression.quality = ZC0301_COMPRESSION_QUALITY; - } else { /* use current values */ - qctrl = s->_qctrl; - rect = &(s->_rect); - } - - if (s->init) { - err = s->init(cam); - if (err) { - DBG(3, "Sensor initialization failed"); - return err; - } - } - - if ((err = zc0301_set_compression(cam, &cam->compression))) { - DBG(3, "set_compression() failed"); - return err; - } - - if (s->set_crop) - if ((err = s->set_crop(cam, rect))) { - DBG(3, "set_crop() failed"); - return err; - } - - if (s->set_ctrl) { - for (i = 0; i < ARRAY_SIZE(s->qctrl); i++) - if (s->qctrl[i].id != 0 && - !(s->qctrl[i].flags & V4L2_CTRL_FLAG_DISABLED)) { - ctrl.id = s->qctrl[i].id; - ctrl.value = qctrl[i].default_value; - err = s->set_ctrl(cam, &ctrl); - if (err) { - DBG(3, "Set %s control failed", - s->qctrl[i].name); - return err; - } - DBG(3, "Image sensor supports '%s' control", - s->qctrl[i].name); - } - } - - if (!(cam->state & DEV_INITIALIZED)) { - mutex_init(&cam->fileop_mutex); - spin_lock_init(&cam->queue_lock); - init_waitqueue_head(&cam->wait_frame); - init_waitqueue_head(&cam->wait_stream); - cam->nreadbuffers = 2; - memcpy(s->_qctrl, s->qctrl, sizeof(s->qctrl)); - memcpy(&(s->_rect), &(s->cropcap.defrect), - sizeof(struct v4l2_rect)); - cam->state |= DEV_INITIALIZED; - } - - DBG(2, "Initialization succeeded"); - return 0; -} - -/*****************************************************************************/ - -static void zc0301_release_resources(struct kref *kref) -{ - struct zc0301_device *cam = container_of(kref, struct zc0301_device, - kref); - DBG(2, "V4L2 device %s deregistered", - video_device_node_name(cam->v4ldev)); - video_set_drvdata(cam->v4ldev, NULL); - video_unregister_device(cam->v4ldev); - usb_put_dev(cam->usbdev); - kfree(cam->control_buffer); - kfree(cam); -} - - -static int zc0301_open(struct file *filp) -{ - struct zc0301_device* cam; - int err = 0; - - if (!down_read_trylock(&zc0301_dev_lock)) - return -EAGAIN; - - cam = video_drvdata(filp); - - if (wait_for_completion_interruptible(&cam->probe)) { - up_read(&zc0301_dev_lock); - return -ERESTARTSYS; - } - - kref_get(&cam->kref); - - if (mutex_lock_interruptible(&cam->open_mutex)) { - kref_put(&cam->kref, zc0301_release_resources); - up_read(&zc0301_dev_lock); - return -ERESTARTSYS; - } - - if (cam->state & DEV_DISCONNECTED) { - DBG(1, "Device not present"); - err = -ENODEV; - goto out; - } - - if (cam->users) { - DBG(2, "Device %s is busy...", - video_device_node_name(cam->v4ldev)); - DBG(3, "Simultaneous opens are not supported"); - if ((filp->f_flags & O_NONBLOCK) || - (filp->f_flags & O_NDELAY)) { - err = -EWOULDBLOCK; - goto out; - } - DBG(2, "A blocking open() has been requested. Wait for the " - "device to be released..."); - up_read(&zc0301_dev_lock); - err = wait_event_interruptible_exclusive(cam->wait_open, - (cam->state & DEV_DISCONNECTED) - || !cam->users); - down_read(&zc0301_dev_lock); - if (err) - goto out; - if (cam->state & DEV_DISCONNECTED) { - err = -ENODEV; - goto out; - } - } - - if (cam->state & DEV_MISCONFIGURED) { - err = zc0301_init(cam); - if (err) { - DBG(1, "Initialization failed again. " - "I will retry on next open()."); - goto out; - } - cam->state &= ~DEV_MISCONFIGURED; - } - - if ((err = zc0301_start_transfer(cam))) - goto out; - - filp->private_data = cam; - cam->users++; - cam->io = IO_NONE; - cam->stream = STREAM_OFF; - cam->nbuffers = 0; - cam->frame_count = 0; - zc0301_empty_framequeues(cam); - - DBG(3, "Video device %s is open", - video_device_node_name(cam->v4ldev)); - -out: - mutex_unlock(&cam->open_mutex); - if (err) - kref_put(&cam->kref, zc0301_release_resources); - up_read(&zc0301_dev_lock); - return err; -} - - -static int zc0301_release(struct file *filp) -{ - struct zc0301_device* cam; - - down_write(&zc0301_dev_lock); - - cam = video_drvdata(filp); - - zc0301_stop_transfer(cam); - zc0301_release_buffers(cam); - cam->users--; - wake_up_interruptible_nr(&cam->wait_open, 1); - - DBG(3, "Video device %s closed", - video_device_node_name(cam->v4ldev)); - - kref_put(&cam->kref, zc0301_release_resources); - - up_write(&zc0301_dev_lock); - - return 0; -} - - -static ssize_t -zc0301_read(struct file* filp, char __user * buf, size_t count, loff_t* f_pos) -{ - struct zc0301_device *cam = video_drvdata(filp); - struct zc0301_frame_t* f, * i; - unsigned long lock_flags; - long timeout; - int err = 0; - - if (mutex_lock_interruptible(&cam->fileop_mutex)) - return -ERESTARTSYS; - - if (cam->state & DEV_DISCONNECTED) { - DBG(1, "Device not present"); - mutex_unlock(&cam->fileop_mutex); - return -ENODEV; - } - - if (cam->state & DEV_MISCONFIGURED) { - DBG(1, "The camera is misconfigured. Close and open it " - "again."); - mutex_unlock(&cam->fileop_mutex); - return -EIO; - } - - if (cam->io == IO_MMAP) { - DBG(3, "Close and open the device again to choose the read " - "method"); - mutex_unlock(&cam->fileop_mutex); - return -EBUSY; - } - - if (cam->io == IO_NONE) { - if (!zc0301_request_buffers(cam, cam->nreadbuffers, IO_READ)) { - DBG(1, "read() failed, not enough memory"); - mutex_unlock(&cam->fileop_mutex); - return -ENOMEM; - } - cam->io = IO_READ; - cam->stream = STREAM_ON; - } - - if (list_empty(&cam->inqueue)) { - if (!list_empty(&cam->outqueue)) - zc0301_empty_framequeues(cam); - zc0301_queue_unusedframes(cam); - } - - if (!count) { - mutex_unlock(&cam->fileop_mutex); - return 0; - } - - if (list_empty(&cam->outqueue)) { - if (filp->f_flags & O_NONBLOCK) { - mutex_unlock(&cam->fileop_mutex); - return -EAGAIN; - } - timeout = wait_event_interruptible_timeout - ( cam->wait_frame, - (!list_empty(&cam->outqueue)) || - (cam->state & DEV_DISCONNECTED) || - (cam->state & DEV_MISCONFIGURED), - msecs_to_jiffies( - cam->module_param.frame_timeout * 1000 - ) - ); - if (timeout < 0) { - mutex_unlock(&cam->fileop_mutex); - return timeout; - } - if (cam->state & DEV_DISCONNECTED) { - mutex_unlock(&cam->fileop_mutex); - return -ENODEV; - } - if (!timeout || (cam->state & DEV_MISCONFIGURED)) { - mutex_unlock(&cam->fileop_mutex); - return -EIO; - } - } - - f = list_entry(cam->outqueue.prev, struct zc0301_frame_t, frame); - - if (count > f->buf.bytesused) - count = f->buf.bytesused; - - if (copy_to_user(buf, f->bufmem, count)) { - err = -EFAULT; - goto exit; - } - *f_pos += count; - -exit: - spin_lock_irqsave(&cam->queue_lock, lock_flags); - list_for_each_entry(i, &cam->outqueue, frame) - i->state = F_UNUSED; - INIT_LIST_HEAD(&cam->outqueue); - spin_unlock_irqrestore(&cam->queue_lock, lock_flags); - - zc0301_queue_unusedframes(cam); - - PDBGG("Frame #%lu, bytes read: %zu", - (unsigned long)f->buf.index, count); - - mutex_unlock(&cam->fileop_mutex); - - return err ? err : count; -} - - -static unsigned int zc0301_poll(struct file *filp, poll_table *wait) -{ - struct zc0301_device *cam = video_drvdata(filp); - struct zc0301_frame_t* f; - unsigned long lock_flags; - unsigned int mask = 0; - - if (mutex_lock_interruptible(&cam->fileop_mutex)) - return POLLERR; - - if (cam->state & DEV_DISCONNECTED) { - DBG(1, "Device not present"); - goto error; - } - - if (cam->state & DEV_MISCONFIGURED) { - DBG(1, "The camera is misconfigured. Close and open it " - "again."); - goto error; - } - - if (cam->io == IO_NONE) { - if (!zc0301_request_buffers(cam, cam->nreadbuffers, IO_READ)) { - DBG(1, "poll() failed, not enough memory"); - goto error; - } - cam->io = IO_READ; - cam->stream = STREAM_ON; - } - - if (cam->io == IO_READ) { - spin_lock_irqsave(&cam->queue_lock, lock_flags); - list_for_each_entry(f, &cam->outqueue, frame) - f->state = F_UNUSED; - INIT_LIST_HEAD(&cam->outqueue); - spin_unlock_irqrestore(&cam->queue_lock, lock_flags); - zc0301_queue_unusedframes(cam); - } - - poll_wait(filp, &cam->wait_frame, wait); - - if (!list_empty(&cam->outqueue)) - mask |= POLLIN | POLLRDNORM; - - mutex_unlock(&cam->fileop_mutex); - - return mask; - -error: - mutex_unlock(&cam->fileop_mutex); - return POLLERR; -} - - -static void zc0301_vm_open(struct vm_area_struct* vma) -{ - struct zc0301_frame_t* f = vma->vm_private_data; - f->vma_use_count++; -} - - -static void zc0301_vm_close(struct vm_area_struct* vma) -{ - /* NOTE: buffers are not freed here */ - struct zc0301_frame_t* f = vma->vm_private_data; - f->vma_use_count--; -} - - -static const struct vm_operations_struct zc0301_vm_ops = { - .open = zc0301_vm_open, - .close = zc0301_vm_close, -}; - - -static int zc0301_mmap(struct file* filp, struct vm_area_struct *vma) -{ - struct zc0301_device *cam = video_drvdata(filp); - unsigned long size = vma->vm_end - vma->vm_start, - start = vma->vm_start; - void *pos; - u32 i; - - if (mutex_lock_interruptible(&cam->fileop_mutex)) - return -ERESTARTSYS; - - if (cam->state & DEV_DISCONNECTED) { - DBG(1, "Device not present"); - mutex_unlock(&cam->fileop_mutex); - return -ENODEV; - } - - if (cam->state & DEV_MISCONFIGURED) { - DBG(1, "The camera is misconfigured. Close and open it " - "again."); - mutex_unlock(&cam->fileop_mutex); - return -EIO; - } - - if (!(vma->vm_flags & (VM_WRITE | VM_READ))) { - mutex_unlock(&cam->fileop_mutex); - return -EACCES; - } - - if (cam->io != IO_MMAP || - size != PAGE_ALIGN(cam->frame[0].buf.length)) { - mutex_unlock(&cam->fileop_mutex); - return -EINVAL; - } - - for (i = 0; i < cam->nbuffers; i++) { - if ((cam->frame[i].buf.m.offset>>PAGE_SHIFT) == vma->vm_pgoff) - break; - } - if (i == cam->nbuffers) { - mutex_unlock(&cam->fileop_mutex); - return -EINVAL; - } - - vma->vm_flags |= VM_IO; - vma->vm_flags |= VM_RESERVED; - - pos = cam->frame[i].bufmem; - while (size > 0) { /* size is page-aligned */ - if (vm_insert_page(vma, start, vmalloc_to_page(pos))) { - mutex_unlock(&cam->fileop_mutex); - return -EAGAIN; - } - start += PAGE_SIZE; - pos += PAGE_SIZE; - size -= PAGE_SIZE; - } - - vma->vm_ops = &zc0301_vm_ops; - vma->vm_private_data = &cam->frame[i]; - zc0301_vm_open(vma); - - mutex_unlock(&cam->fileop_mutex); - - return 0; -} - -/*****************************************************************************/ - -static int -zc0301_vidioc_querycap(struct zc0301_device* cam, void __user * arg) -{ - struct v4l2_capability cap = { - .driver = "zc0301", - .version = ZC0301_MODULE_VERSION_CODE, - .capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_READWRITE | - V4L2_CAP_STREAMING, - }; - - strlcpy(cap.card, cam->v4ldev->name, sizeof(cap.card)); - if (usb_make_path(cam->usbdev, cap.bus_info, sizeof(cap.bus_info)) < 0) - strlcpy(cap.bus_info, dev_name(&cam->usbdev->dev), - sizeof(cap.bus_info)); - - if (copy_to_user(arg, &cap, sizeof(cap))) - return -EFAULT; - - return 0; -} - - -static int -zc0301_vidioc_enuminput(struct zc0301_device* cam, void __user * arg) -{ - struct v4l2_input i; - - if (copy_from_user(&i, arg, sizeof(i))) - return -EFAULT; - - if (i.index) - return -EINVAL; - - memset(&i, 0, sizeof(i)); - strcpy(i.name, "Camera"); - i.type = V4L2_INPUT_TYPE_CAMERA; - - if (copy_to_user(arg, &i, sizeof(i))) - return -EFAULT; - - return 0; -} - - -static int -zc0301_vidioc_g_input(struct zc0301_device* cam, void __user * arg) -{ - int index = 0; - - if (copy_to_user(arg, &index, sizeof(index))) - return -EFAULT; - - return 0; -} - - -static int -zc0301_vidioc_s_input(struct zc0301_device* cam, void __user * arg) -{ - int index; - - if (copy_from_user(&index, arg, sizeof(index))) - return -EFAULT; - - if (index != 0) - return -EINVAL; - - return 0; -} - - -static int -zc0301_vidioc_query_ctrl(struct zc0301_device* cam, void __user * arg) -{ - struct zc0301_sensor* s = &cam->sensor; - struct v4l2_queryctrl qc; - u8 i; - - if (copy_from_user(&qc, arg, sizeof(qc))) - return -EFAULT; - - for (i = 0; i < ARRAY_SIZE(s->qctrl); i++) - if (qc.id && qc.id == s->qctrl[i].id) { - memcpy(&qc, &(s->qctrl[i]), sizeof(qc)); - if (copy_to_user(arg, &qc, sizeof(qc))) - return -EFAULT; - return 0; - } - - return -EINVAL; -} - - -static int -zc0301_vidioc_g_ctrl(struct zc0301_device* cam, void __user * arg) -{ - struct zc0301_sensor* s = &cam->sensor; - struct v4l2_control ctrl; - int err = 0; - u8 i; - - if (!s->get_ctrl && !s->set_ctrl) - return -EINVAL; - - if (copy_from_user(&ctrl, arg, sizeof(ctrl))) - return -EFAULT; - - if (!s->get_ctrl) { - for (i = 0; i < ARRAY_SIZE(s->qctrl); i++) - if (ctrl.id == s->qctrl[i].id) { - ctrl.value = s->_qctrl[i].default_value; - goto exit; - } - return -EINVAL; - } else - err = s->get_ctrl(cam, &ctrl); - -exit: - if (copy_to_user(arg, &ctrl, sizeof(ctrl))) - return -EFAULT; - - return err; -} - - -static int -zc0301_vidioc_s_ctrl(struct zc0301_device* cam, void __user * arg) -{ - struct zc0301_sensor* s = &cam->sensor; - struct v4l2_control ctrl; - u8 i; - int err = 0; - - if (!s->set_ctrl) - return -EINVAL; - - if (copy_from_user(&ctrl, arg, sizeof(ctrl))) - return -EFAULT; - - for (i = 0; i < ARRAY_SIZE(s->qctrl); i++) { - if (ctrl.id == s->qctrl[i].id) { - if (s->qctrl[i].flags & V4L2_CTRL_FLAG_DISABLED) - return -EINVAL; - if (ctrl.value < s->qctrl[i].minimum || - ctrl.value > s->qctrl[i].maximum) - return -ERANGE; - ctrl.value -= ctrl.value % s->qctrl[i].step; - break; - } - } - if (i == ARRAY_SIZE(s->qctrl)) - return -EINVAL; - if ((err = s->set_ctrl(cam, &ctrl))) - return err; - - s->_qctrl[i].default_value = ctrl.value; - - return 0; -} - - -static int -zc0301_vidioc_cropcap(struct zc0301_device* cam, void __user * arg) -{ - struct v4l2_cropcap* cc = &(cam->sensor.cropcap); - - cc->type = V4L2_BUF_TYPE_VIDEO_CAPTURE; - cc->pixelaspect.numerator = 1; - cc->pixelaspect.denominator = 1; - - if (copy_to_user(arg, cc, sizeof(*cc))) - return -EFAULT; - - return 0; -} - - -static int -zc0301_vidioc_g_crop(struct zc0301_device* cam, void __user * arg) -{ - struct zc0301_sensor* s = &cam->sensor; - struct v4l2_crop crop = { - .type = V4L2_BUF_TYPE_VIDEO_CAPTURE, - }; - - memcpy(&(crop.c), &(s->_rect), sizeof(struct v4l2_rect)); - - if (copy_to_user(arg, &crop, sizeof(crop))) - return -EFAULT; - - return 0; -} - - -static int -zc0301_vidioc_s_crop(struct zc0301_device* cam, void __user * arg) -{ - struct zc0301_sensor* s = &cam->sensor; - struct v4l2_crop crop; - struct v4l2_rect* rect; - struct v4l2_rect* bounds = &(s->cropcap.bounds); - const enum zc0301_stream_state stream = cam->stream; - const u32 nbuffers = cam->nbuffers; - u32 i; - int err = 0; - - if (copy_from_user(&crop, arg, sizeof(crop))) - return -EFAULT; - - rect = &(crop.c); - - if (crop.type != V4L2_BUF_TYPE_VIDEO_CAPTURE) - return -EINVAL; - - if (cam->module_param.force_munmap) - for (i = 0; i < cam->nbuffers; i++) - if (cam->frame[i].vma_use_count) { - DBG(3, "VIDIOC_S_CROP failed. " - "Unmap the buffers first."); - return -EBUSY; - } - - if (!s->set_crop) { - memcpy(rect, &(s->_rect), sizeof(*rect)); - if (copy_to_user(arg, &crop, sizeof(crop))) - return -EFAULT; - return 0; - } - - rect->left &= ~7L; - rect->top &= ~7L; - if (rect->width < 8) - rect->width = 8; - if (rect->height < 8) - rect->height = 8; - if (rect->width > bounds->width) - rect->width = bounds->width; - if (rect->height > bounds->height) - rect->height = bounds->height; - if (rect->left < bounds->left) - rect->left = bounds->left; - if (rect->top < bounds->top) - rect->top = bounds->top; - if (rect->left + rect->width > bounds->left + bounds->width) - rect->left = bounds->left+bounds->width - rect->width; - if (rect->top + rect->height > bounds->top + bounds->height) - rect->top = bounds->top+bounds->height - rect->height; - rect->width &= ~7L; - rect->height &= ~7L; - - if (cam->stream == STREAM_ON) - if ((err = zc0301_stream_interrupt(cam))) - return err; - - if (copy_to_user(arg, &crop, sizeof(crop))) { - cam->stream = stream; - return -EFAULT; - } - - if (cam->module_param.force_munmap || cam->io == IO_READ) - zc0301_release_buffers(cam); - - if (s->set_crop) - err += s->set_crop(cam, rect); - - if (err) { /* atomic, no rollback in ioctl() */ - cam->state |= DEV_MISCONFIGURED; - DBG(1, "VIDIOC_S_CROP failed because of hardware problems. To " - "use the camera, close and open %s again.", - video_device_node_name(cam->v4ldev)); - return -EIO; - } - - s->pix_format.width = rect->width; - s->pix_format.height = rect->height; - memcpy(&(s->_rect), rect, sizeof(*rect)); - - if ((cam->module_param.force_munmap || cam->io == IO_READ) && - nbuffers != zc0301_request_buffers(cam, nbuffers, cam->io)) { - cam->state |= DEV_MISCONFIGURED; - DBG(1, "VIDIOC_S_CROP failed because of not enough memory. To " - "use the camera, close and open %s again.", - video_device_node_name(cam->v4ldev)); - return -ENOMEM; - } - - if (cam->io == IO_READ) - zc0301_empty_framequeues(cam); - else if (cam->module_param.force_munmap) - zc0301_requeue_outqueue(cam); - - cam->stream = stream; - - return 0; -} - - -static int -zc0301_vidioc_enum_framesizes(struct zc0301_device* cam, void __user * arg) -{ - struct v4l2_frmsizeenum frmsize; - - if (copy_from_user(&frmsize, arg, sizeof(frmsize))) - return -EFAULT; - - if (frmsize.index != 0 && frmsize.index != 1) - return -EINVAL; - - if (frmsize.pixel_format != V4L2_PIX_FMT_JPEG) - return -EINVAL; - - frmsize.type = V4L2_FRMSIZE_TYPE_DISCRETE; - - if (frmsize.index == 1) { - frmsize.discrete.width = cam->sensor.cropcap.defrect.width; - frmsize.discrete.height = cam->sensor.cropcap.defrect.height; - } - memset(&frmsize.reserved, 0, sizeof(frmsize.reserved)); - - if (copy_to_user(arg, &frmsize, sizeof(frmsize))) - return -EFAULT; - - return 0; -} - - -static int -zc0301_vidioc_enum_fmt(struct zc0301_device* cam, void __user * arg) -{ - struct v4l2_fmtdesc fmtd; - - if (copy_from_user(&fmtd, arg, sizeof(fmtd))) - return -EFAULT; - - if (fmtd.type != V4L2_BUF_TYPE_VIDEO_CAPTURE) - return -EINVAL; - - if (fmtd.index == 0) { - strcpy(fmtd.description, "JPEG"); - fmtd.pixelformat = V4L2_PIX_FMT_JPEG; - fmtd.flags = V4L2_FMT_FLAG_COMPRESSED; - } else - return -EINVAL; - - fmtd.type = V4L2_BUF_TYPE_VIDEO_CAPTURE; - memset(&fmtd.reserved, 0, sizeof(fmtd.reserved)); - - if (copy_to_user(arg, &fmtd, sizeof(fmtd))) - return -EFAULT; - - return 0; -} - - -static int -zc0301_vidioc_g_fmt(struct zc0301_device* cam, void __user * arg) -{ - struct v4l2_format format; - struct v4l2_pix_format* pfmt = &(cam->sensor.pix_format); - - if (copy_from_user(&format, arg, sizeof(format))) - return -EFAULT; - - if (format.type != V4L2_BUF_TYPE_VIDEO_CAPTURE) - return -EINVAL; - - pfmt->bytesperline = 0; - pfmt->sizeimage = pfmt->height * ((pfmt->width*pfmt->priv)/8); - pfmt->field = V4L2_FIELD_NONE; - memcpy(&(format.fmt.pix), pfmt, sizeof(*pfmt)); - - if (copy_to_user(arg, &format, sizeof(format))) - return -EFAULT; - - return 0; -} - - -static int -zc0301_vidioc_try_s_fmt(struct zc0301_device* cam, unsigned int cmd, - void __user * arg) -{ - struct zc0301_sensor* s = &cam->sensor; - struct v4l2_format format; - struct v4l2_pix_format* pix; - struct v4l2_pix_format* pfmt = &(s->pix_format); - struct v4l2_rect* bounds = &(s->cropcap.bounds); - struct v4l2_rect rect; - const enum zc0301_stream_state stream = cam->stream; - const u32 nbuffers = cam->nbuffers; - u32 i; - int err = 0; - - if (copy_from_user(&format, arg, sizeof(format))) - return -EFAULT; - - pix = &(format.fmt.pix); - - if (format.type != V4L2_BUF_TYPE_VIDEO_CAPTURE) - return -EINVAL; - - memcpy(&rect, &(s->_rect), sizeof(rect)); - - if (!s->set_crop) { - pix->width = rect.width; - pix->height = rect.height; - } else { - rect.width = pix->width; - rect.height = pix->height; - } - - if (rect.width < 8) - rect.width = 8; - if (rect.height < 8) - rect.height = 8; - if (rect.width > bounds->left + bounds->width - rect.left) - rect.width = bounds->left + bounds->width - rect.left; - if (rect.height > bounds->top + bounds->height - rect.top) - rect.height = bounds->top + bounds->height - rect.top; - rect.width &= ~7L; - rect.height &= ~7L; - - pix->width = rect.width; - pix->height = rect.height; - pix->pixelformat = pfmt->pixelformat; - pix->priv = pfmt->priv; - pix->colorspace = pfmt->colorspace; - pix->bytesperline = 0; - pix->sizeimage = pix->height * ((pix->width * pix->priv) / 8); - pix->field = V4L2_FIELD_NONE; - - if (cmd == VIDIOC_TRY_FMT) { - if (copy_to_user(arg, &format, sizeof(format))) - return -EFAULT; - return 0; - } - - if (cam->module_param.force_munmap) - for (i = 0; i < cam->nbuffers; i++) - if (cam->frame[i].vma_use_count) { - DBG(3, "VIDIOC_S_FMT failed. " - "Unmap the buffers first."); - return -EBUSY; - } - - if (cam->stream == STREAM_ON) - if ((err = zc0301_stream_interrupt(cam))) - return err; - - if (copy_to_user(arg, &format, sizeof(format))) { - cam->stream = stream; - return -EFAULT; - } - - if (cam->module_param.force_munmap || cam->io == IO_READ) - zc0301_release_buffers(cam); - - if (s->set_crop) - err += s->set_crop(cam, &rect); - - if (err) { /* atomic, no rollback in ioctl() */ - cam->state |= DEV_MISCONFIGURED; - DBG(1, "VIDIOC_S_FMT failed because of hardware problems. To " - "use the camera, close and open %s again.", - video_device_node_name(cam->v4ldev)); - return -EIO; - } - - memcpy(pfmt, pix, sizeof(*pix)); - memcpy(&(s->_rect), &rect, sizeof(rect)); - - if ((cam->module_param.force_munmap || cam->io == IO_READ) && - nbuffers != zc0301_request_buffers(cam, nbuffers, cam->io)) { - cam->state |= DEV_MISCONFIGURED; - DBG(1, "VIDIOC_S_FMT failed because of not enough memory. To " - "use the camera, close and open %s again.", - video_device_node_name(cam->v4ldev)); - return -ENOMEM; - } - - if (cam->io == IO_READ) - zc0301_empty_framequeues(cam); - else if (cam->module_param.force_munmap) - zc0301_requeue_outqueue(cam); - - cam->stream = stream; - - return 0; -} - - -static int -zc0301_vidioc_g_jpegcomp(struct zc0301_device* cam, void __user * arg) -{ - if (copy_to_user(arg, &cam->compression, sizeof(cam->compression))) - return -EFAULT; - - return 0; -} - - -static int -zc0301_vidioc_s_jpegcomp(struct zc0301_device* cam, void __user * arg) -{ - struct v4l2_jpegcompression jc; - const enum zc0301_stream_state stream = cam->stream; - int err = 0; - - if (copy_from_user(&jc, arg, sizeof(jc))) - return -EFAULT; - - if (jc.quality != 0) - return -EINVAL; - - if (cam->stream == STREAM_ON) - if ((err = zc0301_stream_interrupt(cam))) - return err; - - err += zc0301_set_compression(cam, &jc); - if (err) { /* atomic, no rollback in ioctl() */ - cam->state |= DEV_MISCONFIGURED; - DBG(1, "VIDIOC_S_JPEGCOMP failed because of hardware " - "problems. To use the camera, close and open %s again.", - video_device_node_name(cam->v4ldev)); - return -EIO; - } - - cam->compression.quality = jc.quality; - - cam->stream = stream; - - return 0; -} - - -static int -zc0301_vidioc_reqbufs(struct zc0301_device* cam, void __user * arg) -{ - struct v4l2_requestbuffers rb; - u32 i; - int err; - - if (copy_from_user(&rb, arg, sizeof(rb))) - return -EFAULT; - - if (rb.type != V4L2_BUF_TYPE_VIDEO_CAPTURE || - rb.memory != V4L2_MEMORY_MMAP) - return -EINVAL; - - if (cam->io == IO_READ) { - DBG(3, "Close and open the device again to choose the mmap " - "I/O method"); - return -EBUSY; - } - - for (i = 0; i < cam->nbuffers; i++) - if (cam->frame[i].vma_use_count) { - DBG(3, "VIDIOC_REQBUFS failed. " - "Previous buffers are still mapped."); - return -EBUSY; - } - - if (cam->stream == STREAM_ON) - if ((err = zc0301_stream_interrupt(cam))) - return err; - - zc0301_empty_framequeues(cam); - - zc0301_release_buffers(cam); - if (rb.count) - rb.count = zc0301_request_buffers(cam, rb.count, IO_MMAP); - - if (copy_to_user(arg, &rb, sizeof(rb))) { - zc0301_release_buffers(cam); - cam->io = IO_NONE; - return -EFAULT; - } - - cam->io = rb.count ? IO_MMAP : IO_NONE; - - return 0; -} - - -static int -zc0301_vidioc_querybuf(struct zc0301_device* cam, void __user * arg) -{ - struct v4l2_buffer b; - - if (copy_from_user(&b, arg, sizeof(b))) - return -EFAULT; - - if (b.type != V4L2_BUF_TYPE_VIDEO_CAPTURE || - b.index >= cam->nbuffers || cam->io != IO_MMAP) - return -EINVAL; - - memcpy(&b, &cam->frame[b.index].buf, sizeof(b)); - - if (cam->frame[b.index].vma_use_count) - b.flags |= V4L2_BUF_FLAG_MAPPED; - - if (cam->frame[b.index].state == F_DONE) - b.flags |= V4L2_BUF_FLAG_DONE; - else if (cam->frame[b.index].state != F_UNUSED) - b.flags |= V4L2_BUF_FLAG_QUEUED; - - if (copy_to_user(arg, &b, sizeof(b))) - return -EFAULT; - - return 0; -} - - -static int -zc0301_vidioc_qbuf(struct zc0301_device* cam, void __user * arg) -{ - struct v4l2_buffer b; - unsigned long lock_flags; - - if (copy_from_user(&b, arg, sizeof(b))) - return -EFAULT; - - if (b.type != V4L2_BUF_TYPE_VIDEO_CAPTURE || - b.index >= cam->nbuffers || cam->io != IO_MMAP) - return -EINVAL; - - if (cam->frame[b.index].state != F_UNUSED) - return -EINVAL; - - cam->frame[b.index].state = F_QUEUED; - - spin_lock_irqsave(&cam->queue_lock, lock_flags); - list_add_tail(&cam->frame[b.index].frame, &cam->inqueue); - spin_unlock_irqrestore(&cam->queue_lock, lock_flags); - - PDBGG("Frame #%lu queued", (unsigned long)b.index); - - return 0; -} - - -static int -zc0301_vidioc_dqbuf(struct zc0301_device* cam, struct file* filp, - void __user * arg) -{ - struct v4l2_buffer b; - struct zc0301_frame_t *f; - unsigned long lock_flags; - long timeout; - - if (copy_from_user(&b, arg, sizeof(b))) - return -EFAULT; - - if (b.type != V4L2_BUF_TYPE_VIDEO_CAPTURE || cam->io!= IO_MMAP) - return -EINVAL; - - if (list_empty(&cam->outqueue)) { - if (cam->stream == STREAM_OFF) - return -EINVAL; - if (filp->f_flags & O_NONBLOCK) - return -EAGAIN; - timeout = wait_event_interruptible_timeout - ( cam->wait_frame, - (!list_empty(&cam->outqueue)) || - (cam->state & DEV_DISCONNECTED) || - (cam->state & DEV_MISCONFIGURED), - cam->module_param.frame_timeout * - 1000 * msecs_to_jiffies(1) ); - if (timeout < 0) - return timeout; - if (cam->state & DEV_DISCONNECTED) - return -ENODEV; - if (!timeout || (cam->state & DEV_MISCONFIGURED)) - return -EIO; - } - - spin_lock_irqsave(&cam->queue_lock, lock_flags); - f = list_entry(cam->outqueue.next, struct zc0301_frame_t, frame); - list_del(cam->outqueue.next); - spin_unlock_irqrestore(&cam->queue_lock, lock_flags); - - f->state = F_UNUSED; - - memcpy(&b, &f->buf, sizeof(b)); - if (f->vma_use_count) - b.flags |= V4L2_BUF_FLAG_MAPPED; - - if (copy_to_user(arg, &b, sizeof(b))) - return -EFAULT; - - PDBGG("Frame #%lu dequeued", (unsigned long)f->buf.index); - - return 0; -} - - -static int -zc0301_vidioc_streamon(struct zc0301_device* cam, void __user * arg) -{ - int type; - - if (copy_from_user(&type, arg, sizeof(type))) - return -EFAULT; - - if (type != V4L2_BUF_TYPE_VIDEO_CAPTURE || cam->io != IO_MMAP) - return -EINVAL; - - cam->stream = STREAM_ON; - - DBG(3, "Stream on"); - - return 0; -} - - -static int -zc0301_vidioc_streamoff(struct zc0301_device* cam, void __user * arg) -{ - int type, err; - - if (copy_from_user(&type, arg, sizeof(type))) - return -EFAULT; - - if (type != V4L2_BUF_TYPE_VIDEO_CAPTURE || cam->io != IO_MMAP) - return -EINVAL; - - if (cam->stream == STREAM_ON) - if ((err = zc0301_stream_interrupt(cam))) - return err; - - zc0301_empty_framequeues(cam); - - DBG(3, "Stream off"); - - return 0; -} - - -static int -zc0301_vidioc_g_parm(struct zc0301_device* cam, void __user * arg) -{ - struct v4l2_streamparm sp; - - if (copy_from_user(&sp, arg, sizeof(sp))) - return -EFAULT; - - if (sp.type != V4L2_BUF_TYPE_VIDEO_CAPTURE) - return -EINVAL; - - sp.parm.capture.extendedmode = 0; - sp.parm.capture.readbuffers = cam->nreadbuffers; - - if (copy_to_user(arg, &sp, sizeof(sp))) - return -EFAULT; - - return 0; -} - - -static int -zc0301_vidioc_s_parm(struct zc0301_device* cam, void __user * arg) -{ - struct v4l2_streamparm sp; - - if (copy_from_user(&sp, arg, sizeof(sp))) - return -EFAULT; - - if (sp.type != V4L2_BUF_TYPE_VIDEO_CAPTURE) - return -EINVAL; - - sp.parm.capture.extendedmode = 0; - - if (sp.parm.capture.readbuffers == 0) - sp.parm.capture.readbuffers = cam->nreadbuffers; - - if (sp.parm.capture.readbuffers > ZC0301_MAX_FRAMES) - sp.parm.capture.readbuffers = ZC0301_MAX_FRAMES; - - if (copy_to_user(arg, &sp, sizeof(sp))) - return -EFAULT; - - cam->nreadbuffers = sp.parm.capture.readbuffers; - - return 0; -} - - -static long zc0301_ioctl_v4l2(struct file *filp, - unsigned int cmd, void __user *arg) -{ - struct zc0301_device *cam = video_drvdata(filp); - - switch (cmd) { - - case VIDIOC_QUERYCAP: - return zc0301_vidioc_querycap(cam, arg); - - case VIDIOC_ENUMINPUT: - return zc0301_vidioc_enuminput(cam, arg); - - case VIDIOC_G_INPUT: - return zc0301_vidioc_g_input(cam, arg); - - case VIDIOC_S_INPUT: - return zc0301_vidioc_s_input(cam, arg); - - case VIDIOC_QUERYCTRL: - return zc0301_vidioc_query_ctrl(cam, arg); - - case VIDIOC_G_CTRL: - return zc0301_vidioc_g_ctrl(cam, arg); - - case VIDIOC_S_CTRL: - return zc0301_vidioc_s_ctrl(cam, arg); - - case VIDIOC_CROPCAP: - return zc0301_vidioc_cropcap(cam, arg); - - case VIDIOC_G_CROP: - return zc0301_vidioc_g_crop(cam, arg); - - case VIDIOC_S_CROP: - return zc0301_vidioc_s_crop(cam, arg); - - case VIDIOC_ENUM_FMT: - return zc0301_vidioc_enum_fmt(cam, arg); - - case VIDIOC_G_FMT: - return zc0301_vidioc_g_fmt(cam, arg); - - case VIDIOC_TRY_FMT: - case VIDIOC_S_FMT: - return zc0301_vidioc_try_s_fmt(cam, cmd, arg); - - case VIDIOC_ENUM_FRAMESIZES: - return zc0301_vidioc_enum_framesizes(cam, arg); - - case VIDIOC_G_JPEGCOMP: - return zc0301_vidioc_g_jpegcomp(cam, arg); - - case VIDIOC_S_JPEGCOMP: - return zc0301_vidioc_s_jpegcomp(cam, arg); - - case VIDIOC_REQBUFS: - return zc0301_vidioc_reqbufs(cam, arg); - - case VIDIOC_QUERYBUF: - return zc0301_vidioc_querybuf(cam, arg); - - case VIDIOC_QBUF: - return zc0301_vidioc_qbuf(cam, arg); - - case VIDIOC_DQBUF: - return zc0301_vidioc_dqbuf(cam, filp, arg); - - case VIDIOC_STREAMON: - return zc0301_vidioc_streamon(cam, arg); - - case VIDIOC_STREAMOFF: - return zc0301_vidioc_streamoff(cam, arg); - - case VIDIOC_G_PARM: - return zc0301_vidioc_g_parm(cam, arg); - - case VIDIOC_S_PARM: - return zc0301_vidioc_s_parm(cam, arg); - - case VIDIOC_G_STD: - case VIDIOC_S_STD: - case VIDIOC_QUERYSTD: - case VIDIOC_ENUMSTD: - case VIDIOC_QUERYMENU: - case VIDIOC_ENUM_FRAMEINTERVALS: - return -EINVAL; - - default: - return -EINVAL; - - } -} - - -static long zc0301_ioctl(struct file *filp, - unsigned int cmd, unsigned long arg) -{ - struct zc0301_device *cam = video_drvdata(filp); - int err = 0; - - if (mutex_lock_interruptible(&cam->fileop_mutex)) - return -ERESTARTSYS; - - if (cam->state & DEV_DISCONNECTED) { - DBG(1, "Device not present"); - mutex_unlock(&cam->fileop_mutex); - return -ENODEV; - } - - if (cam->state & DEV_MISCONFIGURED) { - DBG(1, "The camera is misconfigured. Close and open it " - "again."); - mutex_unlock(&cam->fileop_mutex); - return -EIO; - } - - V4LDBG(3, "zc0301", cmd); - - err = zc0301_ioctl_v4l2(filp, cmd, (void __user *)arg); - - mutex_unlock(&cam->fileop_mutex); - - return err; -} - - -static const struct v4l2_file_operations zc0301_fops = { - .owner = THIS_MODULE, - .open = zc0301_open, - .release = zc0301_release, - .ioctl = zc0301_ioctl, - .read = zc0301_read, - .poll = zc0301_poll, - .mmap = zc0301_mmap, -}; - -/*****************************************************************************/ - -static int -zc0301_usb_probe(struct usb_interface* intf, const struct usb_device_id* id) -{ - struct usb_device *udev = interface_to_usbdev(intf); - struct zc0301_device* cam; - static unsigned int dev_nr; - unsigned int i; - int err = 0; - - if (!(cam = kzalloc(sizeof(struct zc0301_device), GFP_KERNEL))) - return -ENOMEM; - - cam->usbdev = udev; - - if (!(cam->control_buffer = kzalloc(4, GFP_KERNEL))) { - DBG(1, "kmalloc() failed"); - err = -ENOMEM; - goto fail; - } - - if (!(cam->v4ldev = video_device_alloc())) { - DBG(1, "video_device_alloc() failed"); - err = -ENOMEM; - goto fail; - } - - DBG(2, "ZC0301[P] Image Processor and Control Chip detected " - "(vid/pid 0x%04X:0x%04X)",id->idVendor, id->idProduct); - - for (i = 0; zc0301_sensor_table[i]; i++) { - err = zc0301_sensor_table[i](cam); - if (!err) - break; - } - - if (!err) - DBG(2, "%s image sensor detected", cam->sensor.name); - else { - DBG(1, "No supported image sensor detected"); - err = -ENODEV; - goto fail; - } - - if (zc0301_init(cam)) { - DBG(1, "Initialization failed. I will retry on open()."); - cam->state |= DEV_MISCONFIGURED; - } - - strcpy(cam->v4ldev->name, "ZC0301[P] PC Camera"); - cam->v4ldev->fops = &zc0301_fops; - cam->v4ldev->release = video_device_release; - cam->v4ldev->parent = &udev->dev; - video_set_drvdata(cam->v4ldev, cam); - - init_completion(&cam->probe); - - err = video_register_device(cam->v4ldev, VFL_TYPE_GRABBER, - video_nr[dev_nr]); - if (err) { - DBG(1, "V4L2 device registration failed"); - if (err == -ENFILE && video_nr[dev_nr] == -1) - DBG(1, "Free /dev/videoX node not found"); - video_nr[dev_nr] = -1; - dev_nr = (dev_nr < ZC0301_MAX_DEVICES-1) ? dev_nr+1 : 0; - complete_all(&cam->probe); - goto fail; - } - - DBG(2, "V4L2 device registered as %s", - video_device_node_name(cam->v4ldev)); - - cam->module_param.force_munmap = force_munmap[dev_nr]; - cam->module_param.frame_timeout = frame_timeout[dev_nr]; - - dev_nr = (dev_nr < ZC0301_MAX_DEVICES-1) ? dev_nr+1 : 0; - - usb_set_intfdata(intf, cam); - kref_init(&cam->kref); - usb_get_dev(cam->usbdev); - - complete_all(&cam->probe); - - return 0; - -fail: - if (cam) { - kfree(cam->control_buffer); - if (cam->v4ldev) - video_device_release(cam->v4ldev); - kfree(cam); - } - return err; -} - - -static void zc0301_usb_disconnect(struct usb_interface* intf) -{ - struct zc0301_device* cam; - - down_write(&zc0301_dev_lock); - - cam = usb_get_intfdata(intf); - - DBG(2, "Disconnecting %s...", cam->v4ldev->name); - - if (cam->users) { - DBG(2, "Device %s is open! Deregistration and " - "memory deallocation are deferred.", - video_device_node_name(cam->v4ldev)); - cam->state |= DEV_MISCONFIGURED; - zc0301_stop_transfer(cam); - cam->state |= DEV_DISCONNECTED; - wake_up_interruptible(&cam->wait_frame); - wake_up(&cam->wait_stream); - } else - cam->state |= DEV_DISCONNECTED; - - wake_up_interruptible_all(&cam->wait_open); - - kref_put(&cam->kref, zc0301_release_resources); - - up_write(&zc0301_dev_lock); -} - - -static struct usb_driver zc0301_usb_driver = { - .name = "zc0301", - .id_table = zc0301_id_table, - .probe = zc0301_usb_probe, - .disconnect = zc0301_usb_disconnect, -}; - -/*****************************************************************************/ - -static int __init zc0301_module_init(void) -{ - int err = 0; - - KDBG(2, ZC0301_MODULE_NAME " v" ZC0301_MODULE_VERSION); - KDBG(3, ZC0301_MODULE_AUTHOR); - - if ((err = usb_register(&zc0301_usb_driver))) - KDBG(1, "usb_register() failed"); - - return err; -} - - -static void __exit zc0301_module_exit(void) -{ - usb_deregister(&zc0301_usb_driver); -} - - -module_init(zc0301_module_init); -module_exit(zc0301_module_exit); diff --git a/drivers/media/video/zc0301/zc0301_pas202bcb.c b/drivers/media/video/zc0301/zc0301_pas202bcb.c deleted file mode 100644 index 24b0dfba357..00000000000 --- a/drivers/media/video/zc0301/zc0301_pas202bcb.c +++ /dev/null @@ -1,362 +0,0 @@ -/*************************************************************************** - * Plug-in for PAS202BCB image sensor connected to the ZC0301 Image * - * Processor and Control Chip * - * * - * Copyright (C) 2006-2007 by Luca Risolia <luca.risolia@studio.unibo.it> * - * * - * Initialization values of the ZC0301[P] have been taken from the SPCA5XX * - * driver maintained by Michel Xhaard <mxhaard@magic.fr> * - * * - * This program is free software; you can redistribute it and/or modify * - * it under the terms of the GNU General Public License as published by * - * the Free Software Foundation; either version 2 of the License, or * - * (at your option) any later version. * - * * - * This program is distributed in the hope that it will be useful, * - * but WITHOUT ANY WARRANTY; without even the implied warranty of * - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * - * GNU General Public License for more details. * - * * - * You should have received a copy of the GNU General Public License * - * along with this program; if not, write to the Free Software * - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. * - ***************************************************************************/ - -/* - NOTE: Sensor controls are disabled for now, becouse changing them while - streaming sometimes results in out-of-sync video frames. We'll use - the default initialization, until we know how to stop and start video - in the chip. However, the image quality still looks good under various - light conditions. -*/ - -#include <linux/delay.h> -#include "zc0301_sensor.h" - - -static struct zc0301_sensor pas202bcb; - - -static int pas202bcb_init(struct zc0301_device* cam) -{ - int err = 0; - - err += zc0301_write_reg(cam, 0x0002, 0x00); - err += zc0301_write_reg(cam, 0x0003, 0x02); - err += zc0301_write_reg(cam, 0x0004, 0x80); - err += zc0301_write_reg(cam, 0x0005, 0x01); - err += zc0301_write_reg(cam, 0x0006, 0xE0); - err += zc0301_write_reg(cam, 0x0098, 0x00); - err += zc0301_write_reg(cam, 0x009A, 0x03); - err += zc0301_write_reg(cam, 0x011A, 0x00); - err += zc0301_write_reg(cam, 0x011C, 0x03); - err += zc0301_write_reg(cam, 0x009B, 0x01); - err += zc0301_write_reg(cam, 0x009C, 0xE6); - err += zc0301_write_reg(cam, 0x009D, 0x02); - err += zc0301_write_reg(cam, 0x009E, 0x86); - - err += zc0301_i2c_write(cam, 0x02, 0x02); - err += zc0301_i2c_write(cam, 0x0A, 0x01); - err += zc0301_i2c_write(cam, 0x0B, 0x01); - err += zc0301_i2c_write(cam, 0x0D, 0x00); - err += zc0301_i2c_write(cam, 0x12, 0x05); - err += zc0301_i2c_write(cam, 0x13, 0x63); - err += zc0301_i2c_write(cam, 0x15, 0x70); - - err += zc0301_write_reg(cam, 0x0101, 0xB7); - err += zc0301_write_reg(cam, 0x0100, 0x0D); - err += zc0301_write_reg(cam, 0x0189, 0x06); - err += zc0301_write_reg(cam, 0x01AD, 0x00); - err += zc0301_write_reg(cam, 0x01C5, 0x03); - err += zc0301_write_reg(cam, 0x01CB, 0x13); - err += zc0301_write_reg(cam, 0x0250, 0x08); - err += zc0301_write_reg(cam, 0x0301, 0x08); - err += zc0301_write_reg(cam, 0x018D, 0x70); - err += zc0301_write_reg(cam, 0x0008, 0x03); - err += zc0301_write_reg(cam, 0x01C6, 0x04); - err += zc0301_write_reg(cam, 0x01CB, 0x07); - err += zc0301_write_reg(cam, 0x0120, 0x11); - err += zc0301_write_reg(cam, 0x0121, 0x37); - err += zc0301_write_reg(cam, 0x0122, 0x58); - err += zc0301_write_reg(cam, 0x0123, 0x79); - err += zc0301_write_reg(cam, 0x0124, 0x91); - err += zc0301_write_reg(cam, 0x0125, 0xA6); - err += zc0301_write_reg(cam, 0x0126, 0xB8); - err += zc0301_write_reg(cam, 0x0127, 0xC7); - err += zc0301_write_reg(cam, 0x0128, 0xD3); - err += zc0301_write_reg(cam, 0x0129, 0xDE); - err += zc0301_write_reg(cam, 0x012A, 0xE6); - err += zc0301_write_reg(cam, 0x012B, 0xED); - err += zc0301_write_reg(cam, 0x012C, 0xF3); - err += zc0301_write_reg(cam, 0x012D, 0xF8); - err += zc0301_write_reg(cam, 0x012E, 0xFB); - err += zc0301_write_reg(cam, 0x012F, 0xFF); - err += zc0301_write_reg(cam, 0x0130, 0x26); - err += zc0301_write_reg(cam, 0x0131, 0x23); - err += zc0301_write_reg(cam, 0x0132, 0x20); - err += zc0301_write_reg(cam, 0x0133, 0x1C); - err += zc0301_write_reg(cam, 0x0134, 0x16); - err += zc0301_write_reg(cam, 0x0135, 0x13); - err += zc0301_write_reg(cam, 0x0136, 0x10); - err += zc0301_write_reg(cam, 0x0137, 0x0D); - err += zc0301_write_reg(cam, 0x0138, 0x0B); - err += zc0301_write_reg(cam, 0x0139, 0x09); - err += zc0301_write_reg(cam, 0x013A, 0x07); - err += zc0301_write_reg(cam, 0x013B, 0x06); - err += zc0301_write_reg(cam, 0x013C, 0x05); - err += zc0301_write_reg(cam, 0x013D, 0x04); - err += zc0301_write_reg(cam, 0x013E, 0x03); - err += zc0301_write_reg(cam, 0x013F, 0x02); - err += zc0301_write_reg(cam, 0x010A, 0x4C); - err += zc0301_write_reg(cam, 0x010B, 0xF5); - err += zc0301_write_reg(cam, 0x010C, 0xFF); - err += zc0301_write_reg(cam, 0x010D, 0xF9); - err += zc0301_write_reg(cam, 0x010E, 0x51); - err += zc0301_write_reg(cam, 0x010F, 0xF5); - err += zc0301_write_reg(cam, 0x0110, 0xFB); - err += zc0301_write_reg(cam, 0x0111, 0xED); - err += zc0301_write_reg(cam, 0x0112, 0x5F); - err += zc0301_write_reg(cam, 0x0180, 0x00); - err += zc0301_write_reg(cam, 0x0019, 0x00); - err += zc0301_write_reg(cam, 0x0087, 0x20); - err += zc0301_write_reg(cam, 0x0088, 0x21); - - err += zc0301_i2c_write(cam, 0x20, 0x02); - err += zc0301_i2c_write(cam, 0x21, 0x1B); - err += zc0301_i2c_write(cam, 0x03, 0x44); - err += zc0301_i2c_write(cam, 0x0E, 0x01); - err += zc0301_i2c_write(cam, 0x0F, 0x00); - - err += zc0301_write_reg(cam, 0x01A9, 0x14); - err += zc0301_write_reg(cam, 0x01AA, 0x24); - err += zc0301_write_reg(cam, 0x0190, 0x00); - err += zc0301_write_reg(cam, 0x0191, 0x02); - err += zc0301_write_reg(cam, 0x0192, 0x1B); - err += zc0301_write_reg(cam, 0x0195, 0x00); - err += zc0301_write_reg(cam, 0x0196, 0x00); - err += zc0301_write_reg(cam, 0x0197, 0x4D); - err += zc0301_write_reg(cam, 0x018C, 0x10); - err += zc0301_write_reg(cam, 0x018F, 0x20); - err += zc0301_write_reg(cam, 0x001D, 0x44); - err += zc0301_write_reg(cam, 0x001E, 0x6F); - err += zc0301_write_reg(cam, 0x001F, 0xAD); - err += zc0301_write_reg(cam, 0x0020, 0xEB); - err += zc0301_write_reg(cam, 0x0087, 0x0F); - err += zc0301_write_reg(cam, 0x0088, 0x0E); - err += zc0301_write_reg(cam, 0x0180, 0x40); - err += zc0301_write_reg(cam, 0x0192, 0x1B); - err += zc0301_write_reg(cam, 0x0191, 0x02); - err += zc0301_write_reg(cam, 0x0190, 0x00); - err += zc0301_write_reg(cam, 0x0116, 0x1D); - err += zc0301_write_reg(cam, 0x0117, 0x40); - err += zc0301_write_reg(cam, 0x0118, 0x99); - err += zc0301_write_reg(cam, 0x0180, 0x42); - err += zc0301_write_reg(cam, 0x0116, 0x1D); - err += zc0301_write_reg(cam, 0x0117, 0x40); - err += zc0301_write_reg(cam, 0x0118, 0x99); - err += zc0301_write_reg(cam, 0x0007, 0x00); - - err += zc0301_i2c_write(cam, 0x11, 0x01); - - msleep(100); - - return err; -} - - -static int pas202bcb_get_ctrl(struct zc0301_device* cam, - struct v4l2_control* ctrl) -{ - switch (ctrl->id) { - case V4L2_CID_EXPOSURE: - { - int r1 = zc0301_i2c_read(cam, 0x04, 1), - r2 = zc0301_i2c_read(cam, 0x05, 1); - if (r1 < 0 || r2 < 0) - return -EIO; - ctrl->value = (r1 << 6) | (r2 & 0x3f); - } - return 0; - case V4L2_CID_RED_BALANCE: - if ((ctrl->value = zc0301_i2c_read(cam, 0x09, 1)) < 0) - return -EIO; - ctrl->value &= 0x0f; - return 0; - case V4L2_CID_BLUE_BALANCE: - if ((ctrl->value = zc0301_i2c_read(cam, 0x07, 1)) < 0) - return -EIO; - ctrl->value &= 0x0f; - return 0; - case V4L2_CID_GAIN: - if ((ctrl->value = zc0301_i2c_read(cam, 0x10, 1)) < 0) - return -EIO; - ctrl->value &= 0x1f; - return 0; - case ZC0301_V4L2_CID_GREEN_BALANCE: - if ((ctrl->value = zc0301_i2c_read(cam, 0x08, 1)) < 0) - return -EIO; - ctrl->value &= 0x0f; - return 0; - case ZC0301_V4L2_CID_DAC_MAGNITUDE: - if ((ctrl->value = zc0301_i2c_read(cam, 0x0c, 1)) < 0) - return -EIO; - return 0; - default: - return -EINVAL; - } -} - - -static int pas202bcb_set_ctrl(struct zc0301_device* cam, - const struct v4l2_control* ctrl) -{ - int err = 0; - - switch (ctrl->id) { - case V4L2_CID_EXPOSURE: - err += zc0301_i2c_write(cam, 0x04, ctrl->value >> 6); - err += zc0301_i2c_write(cam, 0x05, ctrl->value & 0x3f); - break; - case V4L2_CID_RED_BALANCE: - err += zc0301_i2c_write(cam, 0x09, ctrl->value); - break; - case V4L2_CID_BLUE_BALANCE: - err += zc0301_i2c_write(cam, 0x07, ctrl->value); - break; - case V4L2_CID_GAIN: - err += zc0301_i2c_write(cam, 0x10, ctrl->value); - break; - case ZC0301_V4L2_CID_GREEN_BALANCE: - err += zc0301_i2c_write(cam, 0x08, ctrl->value); - break; - case ZC0301_V4L2_CID_DAC_MAGNITUDE: - err += zc0301_i2c_write(cam, 0x0c, ctrl->value); - break; - default: - return -EINVAL; - } - err += zc0301_i2c_write(cam, 0x11, 0x01); - - return err ? -EIO : 0; -} - - -static struct zc0301_sensor pas202bcb = { - .name = "PAS202BCB", - .init = &pas202bcb_init, - .qctrl = { - { - .id = V4L2_CID_EXPOSURE, - .type = V4L2_CTRL_TYPE_INTEGER, - .name = "exposure", - .minimum = 0x01e5, - .maximum = 0x3fff, - .step = 0x0001, - .default_value = 0x01e5, - .flags = V4L2_CTRL_FLAG_DISABLED, - }, - { - .id = V4L2_CID_GAIN, - .type = V4L2_CTRL_TYPE_INTEGER, - .name = "global gain", - .minimum = 0x00, - .maximum = 0x1f, - .step = 0x01, - .default_value = 0x0c, - .flags = V4L2_CTRL_FLAG_DISABLED, - }, - { - .id = ZC0301_V4L2_CID_DAC_MAGNITUDE, - .type = V4L2_CTRL_TYPE_INTEGER, - .name = "DAC magnitude", - .minimum = 0x00, - .maximum = 0xff, - .step = 0x01, - .default_value = 0x00, - .flags = V4L2_CTRL_FLAG_DISABLED, - }, - { - .id = V4L2_CID_RED_BALANCE, - .type = V4L2_CTRL_TYPE_INTEGER, - .name = "red balance", - .minimum = 0x00, - .maximum = 0x0f, - .step = 0x01, - .default_value = 0x01, - .flags = V4L2_CTRL_FLAG_DISABLED, - }, - { - .id = V4L2_CID_BLUE_BALANCE, - .type = V4L2_CTRL_TYPE_INTEGER, - .name = "blue balance", - .minimum = 0x00, - .maximum = 0x0f, - .step = 0x01, - .default_value = 0x05, - .flags = V4L2_CTRL_FLAG_DISABLED, - }, - { - .id = ZC0301_V4L2_CID_GREEN_BALANCE, - .type = V4L2_CTRL_TYPE_INTEGER, - .name = "green balance", - .minimum = 0x00, - .maximum = 0x0f, - .step = 0x01, - .default_value = 0x00, - .flags = V4L2_CTRL_FLAG_DISABLED, - }, - }, - .get_ctrl = &pas202bcb_get_ctrl, - .set_ctrl = &pas202bcb_set_ctrl, - .cropcap = { - .bounds = { - .left = 0, - .top = 0, - .width = 640, - .height = 480, - }, - .defrect = { - .left = 0, - .top = 0, - .width = 640, - .height = 480, - }, - }, - .pix_format = { - .width = 640, - .height = 480, - .pixelformat = V4L2_PIX_FMT_JPEG, - .priv = 8, - .colorspace = V4L2_COLORSPACE_JPEG, - }, -}; - - -int zc0301_probe_pas202bcb(struct zc0301_device* cam) -{ - int r0 = 0, r1 = 0, err = 0; - unsigned int pid = 0; - - err += zc0301_write_reg(cam, 0x0000, 0x01); - err += zc0301_write_reg(cam, 0x0010, 0x0e); - err += zc0301_write_reg(cam, 0x0001, 0x01); - err += zc0301_write_reg(cam, 0x0012, 0x03); - err += zc0301_write_reg(cam, 0x0012, 0x01); - err += zc0301_write_reg(cam, 0x008d, 0x08); - - msleep(10); - - r0 = zc0301_i2c_read(cam, 0x00, 1); - r1 = zc0301_i2c_read(cam, 0x01, 1); - - if (r0 < 0 || r1 < 0 || err) - return -EIO; - - pid = (r0 << 4) | ((r1 & 0xf0) >> 4); - if (pid != 0x017) - return -ENODEV; - - zc0301_attach_sensor(cam, &pas202bcb); - - return 0; -} diff --git a/drivers/media/video/zc0301/zc0301_pb0330.c b/drivers/media/video/zc0301/zc0301_pb0330.c deleted file mode 100644 index 9519aba3612..00000000000 --- a/drivers/media/video/zc0301/zc0301_pb0330.c +++ /dev/null @@ -1,188 +0,0 @@ -/*************************************************************************** - * Plug-in for PB-0330 image sensor connected to the ZC0301P Image * - * Processor and Control Chip * - * * - * Copyright (C) 2006-2007 by Luca Risolia <luca.risolia@studio.unibo.it> * - * * - * Initialization values of the ZC0301[P] have been taken from the SPCA5XX * - * driver maintained by Michel Xhaard <mxhaard@magic.fr> * - * * - * This program is free software; you can redistribute it and/or modify * - * it under the terms of the GNU General Public License as published by * - * the Free Software Foundation; either version 2 of the License, or * - * (at your option) any later version. * - * * - * This program is distributed in the hope that it will be useful, * - * but WITHOUT ANY WARRANTY; without even the implied warranty of * - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * - * GNU General Public License for more details. * - * * - * You should have received a copy of the GNU General Public License * - * along with this program; if not, write to the Free Software * - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. * - ***************************************************************************/ - -#include <linux/delay.h> -#include "zc0301_sensor.h" - - -static struct zc0301_sensor pb0330; - - -static int pb0330_init(struct zc0301_device* cam) -{ - int err = 0; - - err += zc0301_write_reg(cam, 0x0000, 0x01); - err += zc0301_write_reg(cam, 0x0008, 0x03); - err += zc0301_write_reg(cam, 0x0010, 0x0A); - err += zc0301_write_reg(cam, 0x0002, 0x00); - err += zc0301_write_reg(cam, 0x0003, 0x02); - err += zc0301_write_reg(cam, 0x0004, 0x80); - err += zc0301_write_reg(cam, 0x0005, 0x01); - err += zc0301_write_reg(cam, 0x0006, 0xE0); - err += zc0301_write_reg(cam, 0x0001, 0x01); - err += zc0301_write_reg(cam, 0x0012, 0x05); - err += zc0301_write_reg(cam, 0x0012, 0x07); - err += zc0301_write_reg(cam, 0x0098, 0x00); - err += zc0301_write_reg(cam, 0x009A, 0x00); - err += zc0301_write_reg(cam, 0x011A, 0x00); - err += zc0301_write_reg(cam, 0x011C, 0x00); - err += zc0301_write_reg(cam, 0x0012, 0x05); - - err += zc0301_i2c_write(cam, 0x01, 0x0006); - err += zc0301_i2c_write(cam, 0x02, 0x0011); - err += zc0301_i2c_write(cam, 0x03, 0x01E7); - err += zc0301_i2c_write(cam, 0x04, 0x0287); - err += zc0301_i2c_write(cam, 0x06, 0x0003); - err += zc0301_i2c_write(cam, 0x07, 0x3002); - err += zc0301_i2c_write(cam, 0x20, 0x1100); - err += zc0301_i2c_write(cam, 0x2F, 0xF7B0); - err += zc0301_i2c_write(cam, 0x30, 0x0005); - err += zc0301_i2c_write(cam, 0x31, 0x0000); - err += zc0301_i2c_write(cam, 0x34, 0x0100); - err += zc0301_i2c_write(cam, 0x35, 0x0060); - err += zc0301_i2c_write(cam, 0x3D, 0x068F); - err += zc0301_i2c_write(cam, 0x40, 0x01E0); - err += zc0301_i2c_write(cam, 0x58, 0x0078); - err += zc0301_i2c_write(cam, 0x62, 0x0411); - - err += zc0301_write_reg(cam, 0x0087, 0x10); - err += zc0301_write_reg(cam, 0x0101, 0x37); - err += zc0301_write_reg(cam, 0x0012, 0x05); - err += zc0301_write_reg(cam, 0x0100, 0x0D); - err += zc0301_write_reg(cam, 0x0189, 0x06); - err += zc0301_write_reg(cam, 0x01AD, 0x00); - err += zc0301_write_reg(cam, 0x01C5, 0x03); - err += zc0301_write_reg(cam, 0x01CB, 0x13); - err += zc0301_write_reg(cam, 0x0250, 0x08); - err += zc0301_write_reg(cam, 0x0301, 0x08); - err += zc0301_write_reg(cam, 0x01A8, 0x60); - err += zc0301_write_reg(cam, 0x018D, 0x6C); - err += zc0301_write_reg(cam, 0x01AD, 0x09); - err += zc0301_write_reg(cam, 0x01AE, 0x15); - err += zc0301_write_reg(cam, 0x010A, 0x50); - err += zc0301_write_reg(cam, 0x010B, 0xF8); - err += zc0301_write_reg(cam, 0x010C, 0xF8); - err += zc0301_write_reg(cam, 0x010D, 0xF8); - err += zc0301_write_reg(cam, 0x010E, 0x50); - err += zc0301_write_reg(cam, 0x010F, 0xF8); - err += zc0301_write_reg(cam, 0x0110, 0xF8); - err += zc0301_write_reg(cam, 0x0111, 0xF8); - err += zc0301_write_reg(cam, 0x0112, 0x50); - err += zc0301_write_reg(cam, 0x0008, 0x03); - err += zc0301_write_reg(cam, 0x01C6, 0x08); - err += zc0301_write_reg(cam, 0x01CB, 0x0F); - err += zc0301_write_reg(cam, 0x010A, 0x50); - err += zc0301_write_reg(cam, 0x010B, 0xF8); - err += zc0301_write_reg(cam, 0x010C, 0xF8); - err += zc0301_write_reg(cam, 0x010D, 0xF8); - err += zc0301_write_reg(cam, 0x010E, 0x50); - err += zc0301_write_reg(cam, 0x010F, 0xF8); - err += zc0301_write_reg(cam, 0x0110, 0xF8); - err += zc0301_write_reg(cam, 0x0111, 0xF8); - err += zc0301_write_reg(cam, 0x0112, 0x50); - err += zc0301_write_reg(cam, 0x0180, 0x00); - err += zc0301_write_reg(cam, 0x0019, 0x00); - - err += zc0301_i2c_write(cam, 0x05, 0x0066); - err += zc0301_i2c_write(cam, 0x09, 0x02B2); - err += zc0301_i2c_write(cam, 0x10, 0x0002); - - err += zc0301_write_reg(cam, 0x011D, 0x60); - err += zc0301_write_reg(cam, 0x0190, 0x00); - err += zc0301_write_reg(cam, 0x0191, 0x07); - err += zc0301_write_reg(cam, 0x0192, 0x8C); - err += zc0301_write_reg(cam, 0x0195, 0x00); - err += zc0301_write_reg(cam, 0x0196, 0x00); - err += zc0301_write_reg(cam, 0x0197, 0x8A); - err += zc0301_write_reg(cam, 0x018C, 0x10); - err += zc0301_write_reg(cam, 0x018F, 0x20); - err += zc0301_write_reg(cam, 0x01A9, 0x14); - err += zc0301_write_reg(cam, 0x01AA, 0x24); - err += zc0301_write_reg(cam, 0x001D, 0xD7); - err += zc0301_write_reg(cam, 0x001E, 0xF0); - err += zc0301_write_reg(cam, 0x001F, 0xF8); - err += zc0301_write_reg(cam, 0x0020, 0xFF); - err += zc0301_write_reg(cam, 0x01AD, 0x09); - err += zc0301_write_reg(cam, 0x01AE, 0x15); - err += zc0301_write_reg(cam, 0x0180, 0x40); - err += zc0301_write_reg(cam, 0x0180, 0x42); - - msleep(100); - - return err; -} - - -static struct zc0301_sensor pb0330 = { - .name = "PB-0330", - .init = &pb0330_init, - .cropcap = { - .bounds = { - .left = 0, - .top = 0, - .width = 640, - .height = 480, - }, - .defrect = { - .left = 0, - .top = 0, - .width = 640, - .height = 480, - }, - }, - .pix_format = { - .width = 640, - .height = 480, - .pixelformat = V4L2_PIX_FMT_JPEG, - .priv = 8, - .colorspace = V4L2_COLORSPACE_JPEG, - }, -}; - - -int zc0301_probe_pb0330(struct zc0301_device* cam) -{ - int r0, err = 0; - - err += zc0301_write_reg(cam, 0x0000, 0x01); - err += zc0301_write_reg(cam, 0x0010, 0x0a); - err += zc0301_write_reg(cam, 0x0001, 0x01); - err += zc0301_write_reg(cam, 0x0012, 0x03); - err += zc0301_write_reg(cam, 0x0012, 0x01); - - msleep(10); - - r0 = zc0301_i2c_read(cam, 0x00, 2); - - if (r0 < 0 || err) - return -EIO; - - if (r0 != 0x8243) - return -ENODEV; - - zc0301_attach_sensor(cam, &pb0330); - - return 0; -} diff --git a/drivers/media/video/zc0301/zc0301_sensor.h b/drivers/media/video/zc0301/zc0301_sensor.h deleted file mode 100644 index 0be783c203f..00000000000 --- a/drivers/media/video/zc0301/zc0301_sensor.h +++ /dev/null @@ -1,107 +0,0 @@ -/*************************************************************************** - * API for image sensors connected to the ZC0301[P] Image Processor and * - * Control Chip * - * * - * Copyright (C) 2006-2007 by Luca Risolia <luca.risolia@studio.unibo.it> * - * * - * This program is free software; you can redistribute it and/or modify * - * it under the terms of the GNU General Public License as published by * - * the Free Software Foundation; either version 2 of the License, or * - * (at your option) any later version. * - * * - * This program is distributed in the hope that it will be useful, * - * but WITHOUT ANY WARRANTY; without even the implied warranty of * - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * - * GNU General Public License for more details. * - * * - * You should have received a copy of the GNU General Public License * - * along with this program; if not, write to the Free Software * - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. * - ***************************************************************************/ - -#ifndef _ZC0301_SENSOR_H_ -#define _ZC0301_SENSOR_H_ - -#include <linux/usb.h> -#include <linux/videodev2.h> -#include <linux/device.h> -#include <linux/stddef.h> -#include <linux/errno.h> -#include <asm/types.h> - -struct zc0301_device; -struct zc0301_sensor; - -/*****************************************************************************/ - -extern int zc0301_probe_pas202bcb(struct zc0301_device* cam); -extern int zc0301_probe_pb0330(struct zc0301_device* cam); - -#define ZC0301_SENSOR_TABLE \ -/* Weak detections must go at the end of the list */ \ -static int (*zc0301_sensor_table[])(struct zc0301_device*) = { \ - &zc0301_probe_pas202bcb, \ - &zc0301_probe_pb0330, \ - NULL, \ -}; - -extern struct zc0301_device* -zc0301_match_id(struct zc0301_device* cam, const struct usb_device_id *id); - -extern void -zc0301_attach_sensor(struct zc0301_device* cam, struct zc0301_sensor* sensor); - -#define ZC0301_USB_DEVICE(vend, prod, intclass) \ - .match_flags = USB_DEVICE_ID_MATCH_DEVICE | \ - USB_DEVICE_ID_MATCH_INT_CLASS, \ - .idVendor = (vend), \ - .idProduct = (prod), \ - .bInterfaceClass = (intclass) - -#if !defined CONFIG_USB_GSPCA_ZC3XX && !defined CONFIG_USB_GSPCA_ZC3XX_MODULE -#define ZC0301_ID_TABLE \ -static const struct usb_device_id zc0301_id_table[] = { \ - { ZC0301_USB_DEVICE(0x046d, 0x08ae, 0xff), }, /* PAS202 */ \ - { ZC0301_USB_DEVICE(0x0ac8, 0x303b, 0xff), }, /* PB-0330 */ \ - { } \ -}; -#else -#define ZC0301_ID_TABLE \ -static const struct usb_device_id zc0301_id_table[] = { \ - { ZC0301_USB_DEVICE(0x046d, 0x08ae, 0xff), }, /* PAS202 */ \ - { } \ -}; -#endif - -/*****************************************************************************/ - -extern int zc0301_write_reg(struct zc0301_device*, u16 index, u16 value); -extern int zc0301_read_reg(struct zc0301_device*, u16 index); -extern int zc0301_i2c_write(struct zc0301_device*, u16 address, u16 value); -extern int zc0301_i2c_read(struct zc0301_device*, u16 address, u8 length); - -/*****************************************************************************/ - -#define ZC0301_MAX_CTRLS (V4L2_CID_LASTP1 - V4L2_CID_BASE + 10) -#define ZC0301_V4L2_CID_DAC_MAGNITUDE (V4L2_CID_PRIVATE_BASE + 0) -#define ZC0301_V4L2_CID_GREEN_BALANCE (V4L2_CID_PRIVATE_BASE + 1) - -struct zc0301_sensor { - char name[32]; - - struct v4l2_queryctrl qctrl[ZC0301_MAX_CTRLS]; - struct v4l2_cropcap cropcap; - struct v4l2_pix_format pix_format; - - int (*init)(struct zc0301_device*); - int (*get_ctrl)(struct zc0301_device*, struct v4l2_control* ctrl); - int (*set_ctrl)(struct zc0301_device*, - const struct v4l2_control* ctrl); - int (*set_crop)(struct zc0301_device*, const struct v4l2_rect* rect); - - /* Private */ - struct v4l2_queryctrl _qctrl[ZC0301_MAX_CTRLS]; - struct v4l2_rect _rect; -}; - -#endif /* _ZC0301_SENSOR_H_ */ diff --git a/drivers/media/video/zoran/videocodec.c b/drivers/media/video/zoran/videocodec.c index cf24956f320..c0107163529 100644 --- a/drivers/media/video/zoran/videocodec.c +++ b/drivers/media/video/zoran/videocodec.c @@ -107,15 +107,14 @@ videocodec_attach (struct videocodec_master *master) if (!try_module_get(h->codec->owner)) return NULL; - codec = - kmalloc(sizeof(struct videocodec), GFP_KERNEL); + codec = kmemdup(h->codec, sizeof(struct videocodec), + GFP_KERNEL); if (!codec) { dprintk(1, KERN_ERR "videocodec_attach: no mem\n"); goto out_module_put; } - memcpy(codec, h->codec, sizeof(struct videocodec)); snprintf(codec->name, sizeof(codec->name), "%s[%d]", codec->name, h->attached); diff --git a/drivers/media/video/zoran/zoran.h b/drivers/media/video/zoran/zoran.h index 8997add1248..307e847fe1c 100644 --- a/drivers/media/video/zoran/zoran.h +++ b/drivers/media/video/zoran/zoran.h @@ -391,7 +391,7 @@ struct zoran { struct mutex resource_lock; /* prevent evil stuff */ - u8 initialized; /* flag if zoran has been correctly initalized */ + u8 initialized; /* flag if zoran has been correctly initialized */ int user; /* number of current users */ struct card_info card; struct tvnorm *timing; diff --git a/drivers/media/video/zoran/zoran_device.c b/drivers/media/video/zoran/zoran_device.c index e6ad4b20561..6f846abee3e 100644 --- a/drivers/media/video/zoran/zoran_device.c +++ b/drivers/media/video/zoran/zoran_device.c @@ -484,7 +484,7 @@ zr36057_overlay (struct zoran *zr, zr->overlay_settings.format); /* Start and length of each line MUST be 4-byte aligned. - * This should be allready checked before the call to this routine. + * This should be already checked before the call to this routine. * All error messages are internal driver checking only! */ /* video display top and bottom registers */ diff --git a/drivers/media/video/zoran/zr36050.c b/drivers/media/video/zoran/zr36050.c index 639dd87c663..e1985609af4 100644 --- a/drivers/media/video/zoran/zr36050.c +++ b/drivers/media/video/zoran/zr36050.c @@ -236,7 +236,7 @@ zr36050_pushit (struct zr36050 *ptr, Could be variable, but until it's not needed it they are just fixed to save memory. Otherwise expand zr36050 structure with arrays, push the values to - it and initalize from there, as e.g. the linux zr36057/60 driver does it. + it and initialize from there, as e.g. the linux zr36057/60 driver does it. ========================================================================= */ static const char zr36050_dqt[0x86] = { diff --git a/drivers/media/video/zoran/zr36060.c b/drivers/media/video/zoran/zr36060.c index 008746ff774..5e4f57cbf31 100644 --- a/drivers/media/video/zoran/zr36060.c +++ b/drivers/media/video/zoran/zr36060.c @@ -227,7 +227,7 @@ zr36060_pushit (struct zr36060 *ptr, Could be variable, but until it's not needed it they are just fixed to save memory. Otherwise expand zr36060 structure with arrays, push the values to - it and initalize from there, as e.g. the linux zr36057/60 driver does it. + it and initialize from there, as e.g. the linux zr36057/60 driver does it. ========================================================================= */ static const char zr36060_dqt[0x86] = { |