diff options
Diffstat (limited to 'drivers/media')
39 files changed, 542 insertions, 542 deletions
diff --git a/drivers/media/dvb/b2c2/flexcop-common.h b/drivers/media/dvb/b2c2/flexcop-common.h index a94912ac187..344a3c89846 100644 --- a/drivers/media/dvb/b2c2/flexcop-common.h +++ b/drivers/media/dvb/b2c2/flexcop-common.h @@ -132,7 +132,7 @@ int flexcop_eeprom_check_mac_addr(struct flexcop_device *fc, int extended); * I2C-channel of the flexcop. */ int flexcop_i2c_request(struct flexcop_device*, flexcop_access_op_t, - flexcop_i2c_port_t, u8 chipaddr, u8 addr, u8 *buf, u16 len); + flexcop_i2c_port_t, u8 chipaddr, u8 addr, u8 *buf, u16 len); /* from flexcop-sram.c */ int flexcop_sram_set_dest(struct flexcop_device *fc, flexcop_sram_dest_t dest, flexcop_sram_dest_target_t target); diff --git a/drivers/media/dvb/b2c2/flexcop-fe-tuner.c b/drivers/media/dvb/b2c2/flexcop-fe-tuner.c index a35330315f6..21a9045b3ef 100644 --- a/drivers/media/dvb/b2c2/flexcop-fe-tuner.c +++ b/drivers/media/dvb/b2c2/flexcop-fe-tuner.c @@ -298,7 +298,7 @@ static int flexcop_fe_request_firmware(struct dvb_frontend* fe, const struct fir } static int lgdt3303_pll_set(struct dvb_frontend* fe, - struct dvb_frontend_parameters* params) + struct dvb_frontend_parameters* params) { struct flexcop_device *fc = fe->dvb->priv; u8 buf[4]; @@ -332,7 +332,7 @@ static int lgdt3303_pll_set(struct dvb_frontend* fe, return -EREMOTEIO; } - return 0; + return 0; } static struct lgdt330x_config air2pc_atsc_hd5000_config = { diff --git a/drivers/media/dvb/bt8xx/dvb-bt8xx.c b/drivers/media/dvb/bt8xx/dvb-bt8xx.c index 2e398090cf6..77977e9c013 100644 --- a/drivers/media/dvb/bt8xx/dvb-bt8xx.c +++ b/drivers/media/dvb/bt8xx/dvb-bt8xx.c @@ -556,9 +556,9 @@ static int tdvs_tua6034_pll_set(struct dvb_frontend* fe, struct dvb_frontend_par dprintk("%s: tuner at 0x%02x bytes: 0x%02x 0x%02x 0x%02x 0x%02x\n", __FUNCTION__, msg.addr, buf[0],buf[1],buf[2],buf[3]); if ((err = i2c_transfer(card->i2c_adapter, &msg, 1)) != 1) { - printk(KERN_WARNING "dvb-bt8xx: %s error " - "(addr %02x <- %02x, err = %i)\n", - __FUNCTION__, buf[0], buf[1], err); + printk(KERN_WARNING "dvb-bt8xx: %s error " + "(addr %02x <- %02x, err = %i)\n", + __FUNCTION__, buf[0], buf[1], err); if (err < 0) return err; else diff --git a/drivers/media/dvb/dvb-usb/vp702x-fe.c b/drivers/media/dvb/dvb-usb/vp702x-fe.c index f20d8dbd0be..104b5d016c7 100644 --- a/drivers/media/dvb/dvb-usb/vp702x-fe.c +++ b/drivers/media/dvb/dvb-usb/vp702x-fe.c @@ -190,7 +190,7 @@ static int vp702x_fe_get_frontend(struct dvb_frontend* fe, } static int vp702x_fe_send_diseqc_msg (struct dvb_frontend* fe, - struct dvb_diseqc_master_cmd *m) + struct dvb_diseqc_master_cmd *m) { struct vp702x_fe_state *st = fe->demodulator_priv; u8 cmd[8],ibuf[10]; diff --git a/drivers/media/dvb/dvb-usb/vp7045-fe.c b/drivers/media/dvb/dvb-usb/vp7045-fe.c index 2746edfeccb..83f1de1e7e5 100644 --- a/drivers/media/dvb/dvb-usb/vp7045-fe.c +++ b/drivers/media/dvb/dvb-usb/vp7045-fe.c @@ -58,7 +58,7 @@ static int vp7045_fe_read_ber(struct dvb_frontend* fe, u32 *ber) struct vp7045_fe_state *state = fe->demodulator_priv; *ber = (vp7045_read_reg(state->d, 0x0D) << 16) | (vp7045_read_reg(state->d, 0x0E) << 8) | - vp7045_read_reg(state->d, 0x0F); + vp7045_read_reg(state->d, 0x0F); return 0; } diff --git a/drivers/media/dvb/frontends/at76c651.c b/drivers/media/dvb/frontends/at76c651.c index 72a2b5455b0..8e0f4b3a141 100644 --- a/drivers/media/dvb/frontends/at76c651.c +++ b/drivers/media/dvb/frontends/at76c651.c @@ -361,9 +361,9 @@ static int at76c651_read_ucblocks(struct dvb_frontend* fe, u32* ucblocks) static int at76c651_get_tune_settings(struct dvb_frontend* fe, struct dvb_frontend_tune_settings *fesettings) { - fesettings->min_delay_ms = 50; - fesettings->step_size = 0; - fesettings->max_drift = 0; + fesettings->min_delay_ms = 50; + fesettings->step_size = 0; + fesettings->max_drift = 0; return 0; } diff --git a/drivers/media/dvb/frontends/bcm3510.c b/drivers/media/dvb/frontends/bcm3510.c index f6d4ee78bdd..8ceb9a33c7a 100644 --- a/drivers/media/dvb/frontends/bcm3510.c +++ b/drivers/media/dvb/frontends/bcm3510.c @@ -69,7 +69,7 @@ MODULE_PARM_DESC(debug, "set debugging level (1=info,2=i2c (|-able))."); #define dbufout(b,l,m) {\ int i; \ for (i = 0; i < l; i++) \ - m("%02x ",b[i]); \ + m("%02x ",b[i]); \ } #define deb_info(args...) dprintk(0x01,args) #define deb_i2c(args...) dprintk(0x02,args) @@ -827,7 +827,7 @@ static struct dvb_frontend_ops bcm3510_ops = { .type = FE_ATSC, .frequency_min = 54000000, .frequency_max = 803000000, - /* stepsize is just a guess */ + /* stepsize is just a guess */ .frequency_stepsize = 0, .caps = FE_CAN_FEC_1_2 | FE_CAN_FEC_2_3 | FE_CAN_FEC_3_4 | diff --git a/drivers/media/dvb/frontends/cx22700.c b/drivers/media/dvb/frontends/cx22700.c index 0c2ed443861..755f774f6b7 100644 --- a/drivers/media/dvb/frontends/cx22700.c +++ b/drivers/media/dvb/frontends/cx22700.c @@ -355,10 +355,10 @@ static int cx22700_get_frontend(struct dvb_frontend* fe, struct dvb_frontend_par static int cx22700_get_tune_settings(struct dvb_frontend* fe, struct dvb_frontend_tune_settings* fesettings) { - fesettings->min_delay_ms = 150; - fesettings->step_size = 166667; - fesettings->max_drift = 166667*2; - return 0; + fesettings->min_delay_ms = 150; + fesettings->step_size = 166667; + fesettings->max_drift = 166667*2; + return 0; } static void cx22700_release(struct dvb_frontend* fe) @@ -407,7 +407,7 @@ static struct dvb_frontend_ops cx22700_ops = { .caps = FE_CAN_FEC_1_2 | FE_CAN_FEC_2_3 | FE_CAN_FEC_3_4 | FE_CAN_FEC_5_6 | FE_CAN_FEC_7_8 | FE_CAN_FEC_AUTO | FE_CAN_QPSK | FE_CAN_QAM_16 | FE_CAN_QAM_64 | - FE_CAN_RECOVER + FE_CAN_RECOVER }, .release = cx22700_release, diff --git a/drivers/media/dvb/frontends/cx22702.c b/drivers/media/dvb/frontends/cx22702.c index d9a8ede14b4..5de0e6d350b 100644 --- a/drivers/media/dvb/frontends/cx22702.c +++ b/drivers/media/dvb/frontends/cx22702.c @@ -2,7 +2,7 @@ Conexant 22702 DVB OFDM demodulator driver based on: - Alps TDMB7 DVB OFDM demodulator driver + Alps TDMB7 DVB OFDM demodulator driver Copyright (C) 2001-2002 Convergence Integrated Media GmbH Holger Waechtler <holger@convergence.de> diff --git a/drivers/media/dvb/frontends/cx22702.h b/drivers/media/dvb/frontends/cx22702.h index 1f250885d2c..5633976a58f 100644 --- a/drivers/media/dvb/frontends/cx22702.h +++ b/drivers/media/dvb/frontends/cx22702.h @@ -2,7 +2,7 @@ Conexant 22702 DVB OFDM demodulator driver based on: - Alps TDMB7 DVB OFDM demodulator driver + Alps TDMB7 DVB OFDM demodulator driver Copyright (C) 2001-2002 Convergence Integrated Media GmbH Holger Waechtler <holger@convergence.de> diff --git a/drivers/media/dvb/frontends/cx24110.c b/drivers/media/dvb/frontends/cx24110.c index 654d7dc879d..0c4db80ec33 100644 --- a/drivers/media/dvb/frontends/cx24110.c +++ b/drivers/media/dvb/frontends/cx24110.c @@ -55,81 +55,81 @@ static int debug; } while (0) static struct {u8 reg; u8 data;} cx24110_regdata[]= - /* Comments beginning with @ denote this value should - be the default */ - {{0x09,0x01}, /* SoftResetAll */ - {0x09,0x00}, /* release reset */ - {0x01,0xe8}, /* MSB of code rate 27.5MS/s */ - {0x02,0x17}, /* middle byte " */ - {0x03,0x29}, /* LSB " */ - {0x05,0x03}, /* @ DVB mode, standard code rate 3/4 */ - {0x06,0xa5}, /* @ PLL 60MHz */ - {0x07,0x01}, /* @ Fclk, i.e. sampling clock, 60MHz */ - {0x0a,0x00}, /* @ partial chip disables, do not set */ - {0x0b,0x01}, /* set output clock in gapped mode, start signal low - active for first byte */ - {0x0c,0x11}, /* no parity bytes, large hold time, serial data out */ - {0x0d,0x6f}, /* @ RS Sync/Unsync thresholds */ - {0x10,0x40}, /* chip doc is misleading here: write bit 6 as 1 - to avoid starting the BER counter. Reset the - CRC test bit. Finite counting selected */ - {0x15,0xff}, /* @ size of the limited time window for RS BER - estimation. It is <value>*256 RS blocks, this - gives approx. 2.6 sec at 27.5MS/s, rate 3/4 */ - {0x16,0x00}, /* @ enable all RS output ports */ - {0x17,0x04}, /* @ time window allowed for the RS to sync */ - {0x18,0xae}, /* @ allow all standard DVB code rates to be scanned - for automatically */ - /* leave the current code rate and normalization - registers as they are after reset... */ - {0x21,0x10}, /* @ during AutoAcq, search each viterbi setting - only once */ - {0x23,0x18}, /* @ size of the limited time window for Viterbi BER - estimation. It is <value>*65536 channel bits, i.e. - approx. 38ms at 27.5MS/s, rate 3/4 */ - {0x24,0x24}, /* do not trigger Viterbi CRC test. Finite count window */ - /* leave front-end AGC parameters at default values */ - /* leave decimation AGC parameters at default values */ - {0x35,0x40}, /* disable all interrupts. They are not connected anyway */ - {0x36,0xff}, /* clear all interrupt pending flags */ - {0x37,0x00}, /* @ fully enable AutoAcqq state machine */ - {0x38,0x07}, /* @ enable fade recovery, but not autostart AutoAcq */ - /* leave the equalizer parameters on their default values */ - /* leave the final AGC parameters on their default values */ - {0x41,0x00}, /* @ MSB of front-end derotator frequency */ - {0x42,0x00}, /* @ middle bytes " */ - {0x43,0x00}, /* @ LSB " */ - /* leave the carrier tracking loop parameters on default */ - /* leave the bit timing loop parameters at gefault */ - {0x56,0x4d}, /* set the filtune voltage to 2.7V, as recommended by */ - /* the cx24108 data sheet for symbol rates above 15MS/s */ - {0x57,0x00}, /* @ Filter sigma delta enabled, positive */ - {0x61,0x95}, /* GPIO pins 1-4 have special function */ - {0x62,0x05}, /* GPIO pin 5 has special function, pin 6 is GPIO */ - {0x63,0x00}, /* All GPIO pins use CMOS output characteristics */ - {0x64,0x20}, /* GPIO 6 is input, all others are outputs */ - {0x6d,0x30}, /* tuner auto mode clock freq 62kHz */ - {0x70,0x15}, /* use auto mode, tuner word is 21 bits long */ - {0x73,0x00}, /* @ disable several demod bypasses */ - {0x74,0x00}, /* @ " */ - {0x75,0x00} /* @ " */ - /* the remaining registers are for SEC */ + /* Comments beginning with @ denote this value should + be the default */ + {{0x09,0x01}, /* SoftResetAll */ + {0x09,0x00}, /* release reset */ + {0x01,0xe8}, /* MSB of code rate 27.5MS/s */ + {0x02,0x17}, /* middle byte " */ + {0x03,0x29}, /* LSB " */ + {0x05,0x03}, /* @ DVB mode, standard code rate 3/4 */ + {0x06,0xa5}, /* @ PLL 60MHz */ + {0x07,0x01}, /* @ Fclk, i.e. sampling clock, 60MHz */ + {0x0a,0x00}, /* @ partial chip disables, do not set */ + {0x0b,0x01}, /* set output clock in gapped mode, start signal low + active for first byte */ + {0x0c,0x11}, /* no parity bytes, large hold time, serial data out */ + {0x0d,0x6f}, /* @ RS Sync/Unsync thresholds */ + {0x10,0x40}, /* chip doc is misleading here: write bit 6 as 1 + to avoid starting the BER counter. Reset the + CRC test bit. Finite counting selected */ + {0x15,0xff}, /* @ size of the limited time window for RS BER + estimation. It is <value>*256 RS blocks, this + gives approx. 2.6 sec at 27.5MS/s, rate 3/4 */ + {0x16,0x00}, /* @ enable all RS output ports */ + {0x17,0x04}, /* @ time window allowed for the RS to sync */ + {0x18,0xae}, /* @ allow all standard DVB code rates to be scanned + for automatically */ + /* leave the current code rate and normalization + registers as they are after reset... */ + {0x21,0x10}, /* @ during AutoAcq, search each viterbi setting + only once */ + {0x23,0x18}, /* @ size of the limited time window for Viterbi BER + estimation. It is <value>*65536 channel bits, i.e. + approx. 38ms at 27.5MS/s, rate 3/4 */ + {0x24,0x24}, /* do not trigger Viterbi CRC test. Finite count window */ + /* leave front-end AGC parameters at default values */ + /* leave decimation AGC parameters at default values */ + {0x35,0x40}, /* disable all interrupts. They are not connected anyway */ + {0x36,0xff}, /* clear all interrupt pending flags */ + {0x37,0x00}, /* @ fully enable AutoAcqq state machine */ + {0x38,0x07}, /* @ enable fade recovery, but not autostart AutoAcq */ + /* leave the equalizer parameters on their default values */ + /* leave the final AGC parameters on their default values */ + {0x41,0x00}, /* @ MSB of front-end derotator frequency */ + {0x42,0x00}, /* @ middle bytes " */ + {0x43,0x00}, /* @ LSB " */ + /* leave the carrier tracking loop parameters on default */ + /* leave the bit timing loop parameters at gefault */ + {0x56,0x4d}, /* set the filtune voltage to 2.7V, as recommended by */ + /* the cx24108 data sheet for symbol rates above 15MS/s */ + {0x57,0x00}, /* @ Filter sigma delta enabled, positive */ + {0x61,0x95}, /* GPIO pins 1-4 have special function */ + {0x62,0x05}, /* GPIO pin 5 has special function, pin 6 is GPIO */ + {0x63,0x00}, /* All GPIO pins use CMOS output characteristics */ + {0x64,0x20}, /* GPIO 6 is input, all others are outputs */ + {0x6d,0x30}, /* tuner auto mode clock freq 62kHz */ + {0x70,0x15}, /* use auto mode, tuner word is 21 bits long */ + {0x73,0x00}, /* @ disable several demod bypasses */ + {0x74,0x00}, /* @ " */ + {0x75,0x00} /* @ " */ + /* the remaining registers are for SEC */ }; static int cx24110_writereg (struct cx24110_state* state, int reg, int data) { - u8 buf [] = { reg, data }; + u8 buf [] = { reg, data }; struct i2c_msg msg = { .addr = state->config->demod_address, .flags = 0, .buf = buf, .len = 2 }; int err; - if ((err = i2c_transfer(state->i2c, &msg, 1)) != 1) { + if ((err = i2c_transfer(state->i2c, &msg, 1)) != 1) { dprintk ("%s: writereg error (err == %i, reg == 0x%02x," " data == 0x%02x)\n", __FUNCTION__, err, reg, data); return -EREMOTEIO; } - return 0; + return 0; } static int cx24110_readreg (struct cx24110_state* state, u8 reg) @@ -153,27 +153,27 @@ static int cx24110_set_inversion (struct cx24110_state* state, fe_spectral_inver switch (inversion) { case INVERSION_OFF: - cx24110_writereg(state,0x37,cx24110_readreg(state,0x37)|0x1); - /* AcqSpectrInvDis on. No idea why someone should want this */ - cx24110_writereg(state,0x5,cx24110_readreg(state,0x5)&0xf7); - /* Initial value 0 at start of acq */ - cx24110_writereg(state,0x22,cx24110_readreg(state,0x22)&0xef); - /* current value 0 */ - /* The cx24110 manual tells us this reg is read-only. - But what the heck... set it ayways */ - break; + cx24110_writereg(state,0x37,cx24110_readreg(state,0x37)|0x1); + /* AcqSpectrInvDis on. No idea why someone should want this */ + cx24110_writereg(state,0x5,cx24110_readreg(state,0x5)&0xf7); + /* Initial value 0 at start of acq */ + cx24110_writereg(state,0x22,cx24110_readreg(state,0x22)&0xef); + /* current value 0 */ + /* The cx24110 manual tells us this reg is read-only. + But what the heck... set it ayways */ + break; case INVERSION_ON: - cx24110_writereg(state,0x37,cx24110_readreg(state,0x37)|0x1); - /* AcqSpectrInvDis on. No idea why someone should want this */ - cx24110_writereg(state,0x5,cx24110_readreg(state,0x5)|0x08); - /* Initial value 1 at start of acq */ - cx24110_writereg(state,0x22,cx24110_readreg(state,0x22)|0x10); - /* current value 1 */ - break; + cx24110_writereg(state,0x37,cx24110_readreg(state,0x37)|0x1); + /* AcqSpectrInvDis on. No idea why someone should want this */ + cx24110_writereg(state,0x5,cx24110_readreg(state,0x5)|0x08); + /* Initial value 1 at start of acq */ + cx24110_writereg(state,0x22,cx24110_readreg(state,0x22)|0x10); + /* current value 1 */ + break; case INVERSION_AUTO: - cx24110_writereg(state,0x37,cx24110_readreg(state,0x37)&0xfe); - /* AcqSpectrInvDis off. Leave initial & current states as is */ - break; + cx24110_writereg(state,0x37,cx24110_readreg(state,0x37)&0xfe); + /* AcqSpectrInvDis off. Leave initial & current states as is */ + break; default: return -EINVAL; } @@ -185,18 +185,18 @@ static int cx24110_set_fec (struct cx24110_state* state, fe_code_rate_t fec) { /* fixme (low): error handling */ - static const int rate[]={-1,1,2,3,5,7,-1}; - static const int g1[]={-1,0x01,0x02,0x05,0x15,0x45,-1}; - static const int g2[]={-1,0x01,0x03,0x06,0x1a,0x7a,-1}; + static const int rate[]={-1,1,2,3,5,7,-1}; + static const int g1[]={-1,0x01,0x02,0x05,0x15,0x45,-1}; + static const int g2[]={-1,0x01,0x03,0x06,0x1a,0x7a,-1}; - /* Well, the AutoAcq engine of the cx24106 and 24110 automatically - searches all enabled viterbi rates, and can handle non-standard - rates as well. */ + /* Well, the AutoAcq engine of the cx24106 and 24110 automatically + searches all enabled viterbi rates, and can handle non-standard + rates as well. */ - if (fec>FEC_AUTO) - fec=FEC_AUTO; + if (fec>FEC_AUTO) + fec=FEC_AUTO; - if (fec==FEC_AUTO) { /* (re-)establish AutoAcq behaviour */ + if (fec==FEC_AUTO) { /* (re-)establish AutoAcq behaviour */ cx24110_writereg(state,0x37,cx24110_readreg(state,0x37)&0xdf); /* clear AcqVitDis bit */ cx24110_writereg(state,0x18,0xae); @@ -208,7 +208,7 @@ static int cx24110_set_fec (struct cx24110_state* state, fe_code_rate_t fec) cx24110_writereg(state,0x1a,0x05); cx24110_writereg(state,0x1b,0x06); /* set the puncture registers for code rate 3/4 */ return 0; - } else { + } else { cx24110_writereg(state,0x37,cx24110_readreg(state,0x37)|0x20); /* set AcqVitDis bit */ if(rate[fec]>0) { @@ -219,10 +219,10 @@ static int cx24110_set_fec (struct cx24110_state* state, fe_code_rate_t fec) cx24110_writereg(state,0x1a,g1[fec]); cx24110_writereg(state,0x1b,g2[fec]); /* not sure if this is the right way: I always used AutoAcq mode */ - } else + } else return -EOPNOTSUPP; /* fixme (low): which is the correct return code? */ - }; + }; return 0; } @@ -245,72 +245,72 @@ static fe_code_rate_t cx24110_get_fec (struct cx24110_state* state) static int cx24110_set_symbolrate (struct cx24110_state* state, u32 srate) { /* fixme (low): add error handling */ - u32 ratio; - u32 tmp, fclk, BDRI; + u32 ratio; + u32 tmp, fclk, BDRI; - static const u32 bands[]={5000000UL,15000000UL,90999000UL/2}; - int i; + static const u32 bands[]={5000000UL,15000000UL,90999000UL/2}; + int i; dprintk("cx24110 debug: entering %s(%d)\n",__FUNCTION__,srate); - if (srate>90999000UL/2) - srate=90999000UL/2; - if (srate<500000) - srate=500000; + if (srate>90999000UL/2) + srate=90999000UL/2; + if (srate<500000) + srate=500000; - for(i=0;(i<sizeof(bands)/sizeof(bands[0]))&&(srate>bands[i]);i++) + for(i=0;(i<sizeof(bands)/sizeof(bands[0]))&&(srate>bands[i]);i++) ; - /* first, check which sample rate is appropriate: 45, 60 80 or 90 MHz, - and set the PLL accordingly (R07[1:0] Fclk, R06[7:4] PLLmult, - R06[3:0] PLLphaseDetGain */ - tmp=cx24110_readreg(state,0x07)&0xfc; - if(srate<90999000UL/4) { /* sample rate 45MHz*/ + /* first, check which sample rate is appropriate: 45, 60 80 or 90 MHz, + and set the PLL accordingly (R07[1:0] Fclk, R06[7:4] PLLmult, + R06[3:0] PLLphaseDetGain */ + tmp=cx24110_readreg(state,0x07)&0xfc; + if(srate<90999000UL/4) { /* sample rate 45MHz*/ cx24110_writereg(state,0x07,tmp); cx24110_writereg(state,0x06,0x78); fclk=90999000UL/2; - } else if(srate<60666000UL/2) { /* sample rate 60MHz */ + } else if(srate<60666000UL/2) { /* sample rate 60MHz */ cx24110_writereg(state,0x07,tmp|0x1); cx24110_writereg(state,0x06,0xa5); fclk=60666000UL; - } else if(srate<80888000UL/2) { /* sample rate 80MHz */ + } else if(srate<80888000UL/2) { /* sample rate 80MHz */ cx24110_writereg(state,0x07,tmp|0x2); cx24110_writereg(state,0x06,0x87); fclk=80888000UL; - } else { /* sample rate 90MHz */ + } else { /* sample rate 90MHz */ cx24110_writereg(state,0x07,tmp|0x3); cx24110_writereg(state,0x06,0x78); fclk=90999000UL; - }; - dprintk("cx24110 debug: fclk %d Hz\n",fclk); - /* we need to divide two integers with approx. 27 bits in 32 bit - arithmetic giving a 25 bit result */ - /* the maximum dividend is 90999000/2, 0x02b6446c, this number is - also the most complex divisor. Hence, the dividend has, - assuming 32bit unsigned arithmetic, 6 clear bits on top, the - divisor 2 unused bits at the bottom. Also, the quotient is - always less than 1/2. Borrowed from VES1893.c, of course */ + }; + dprintk("cx24110 debug: fclk %d Hz\n",fclk); + /* we need to divide two integers with approx. 27 bits in 32 bit + arithmetic giving a 25 bit result */ + /* the maximum dividend is 90999000/2, 0x02b6446c, this number is + also the most complex divisor. Hence, the dividend has, + assuming 32bit unsigned arithmetic, 6 clear bits on top, the + divisor 2 unused bits at the bottom. Also, the quotient is + always less than 1/2. Borrowed from VES1893.c, of course */ - tmp=srate<<6; - BDRI=fclk>>2; - ratio=(tmp/BDRI); + tmp=srate<<6; + BDRI=fclk>>2; + ratio=(tmp/BDRI); - tmp=(tmp%BDRI)<<8; - ratio=(ratio<<8)+(tmp/BDRI); + tmp=(tmp%BDRI)<<8; + ratio=(ratio<<8)+(tmp/BDRI); - tmp=(tmp%BDRI)<<8; - ratio=(ratio<<8)+(tmp/BDRI); + tmp=(tmp%BDRI)<<8; + ratio=(ratio<<8)+(tmp/BDRI); - tmp=(tmp%BDRI)<<1; - ratio=(ratio<<1)+(tmp/BDRI); + tmp=(tmp%BDRI)<<1; + ratio=(ratio<<1)+(tmp/BDRI); - dprintk("srate= %d (range %d, up to %d)\n", srate,i,bands[i]); - dprintk("fclk = %d\n", fclk); - dprintk("ratio= %08x\n", ratio); + dprintk("srate= %d (range %d, up to %d)\n", srate,i,bands[i]); + dprintk("fclk = %d\n", fclk); + dprintk("ratio= %08x\n", ratio); - cx24110_writereg(state, 0x1, (ratio>>16)&0xff); - cx24110_writereg(state, 0x2, (ratio>>8)&0xff); - cx24110_writereg(state, 0x3, (ratio)&0xff); + cx24110_writereg(state, 0x1, (ratio>>16)&0xff); + cx24110_writereg(state, 0x2, (ratio>>8)&0xff); + cx24110_writereg(state, 0x3, (ratio)&0xff); - return 0; + return 0; } @@ -324,48 +324,48 @@ int cx24110_pll_write (struct dvb_frontend* fe, u32 data) dprintk("cx24110 debug: cx24108_write(%8.8x)\n",data); - cx24110_writereg(state,0x6d,0x30); /* auto mode at 62kHz */ - cx24110_writereg(state,0x70,0x15); /* auto mode 21 bits */ + cx24110_writereg(state,0x6d,0x30); /* auto mode at 62kHz */ + cx24110_writereg(state,0x70,0x15); /* auto mode 21 bits */ - /* if the auto tuner writer is still busy, clear it out */ - while (cx24110_readreg(state,0x6d)&0x80) + /* if the auto tuner writer is still busy, clear it out */ + while (cx24110_readreg(state,0x6d)&0x80) cx24110_writereg(state,0x72,0); - /* write the topmost 8 bits */ - cx24110_writereg(state,0x72,(data>>24)&0xff); + /* write the topmost 8 bits */ + cx24110_writereg(state,0x72,(data>>24)&0xff); - /* wait for the send to be completed */ - while ((cx24110_readreg(state,0x6d)&0xc0)==0x80) + /* wait for the send to be completed */ + while ((cx24110_readreg(state,0x6d)&0xc0)==0x80) ; - /* send another 8 bytes */ - cx24110_writereg(state,0x72,(data>>16)&0xff); - while ((cx24110_readreg(state,0x6d)&0xc0)==0x80) + /* send another 8 bytes */ + cx24110_writereg(state,0x72,(data>>16)&0xff); + while ((cx24110_readreg(state,0x6d)&0xc0)==0x80) ; - /* and the topmost 5 bits of this byte */ - cx24110_writereg(state,0x72,(data>>8)&0xff); - while ((cx24110_readreg(state,0x6d)&0xc0)==0x80) + /* and the topmost 5 bits of this byte */ + cx24110_writereg(state,0x72,(data>>8)&0xff); + while ((cx24110_readreg(state,0x6d)&0xc0)==0x80) ; - /* now strobe the enable line once */ - cx24110_writereg(state,0x6d,0x32); - cx24110_writereg(state,0x6d,0x30); + /* now strobe the enable line once */ + cx24110_writereg(state,0x6d,0x32); + cx24110_writereg(state,0x6d,0x30); - return 0; + return 0; } static int cx24110_initfe(struct dvb_frontend* fe) { struct cx24110_state *state = fe->demodulator_priv; /* fixme (low): error handling */ - int i; + int i; dprintk("%s: init chip\n", __FUNCTION__); - for(i=0;i<sizeof(cx24110_regdata)/sizeof(cx24110_regdata[0]);i++) { + for(i=0;i<sizeof(cx24110_regdata)/sizeof(cx24110_regdata[0]);i++) { cx24110_writereg(state, cx24110_regdata[i].reg, cx24110_regdata[i].data); - }; + }; if (state->config->pll_init) state->config->pll_init(fe); diff --git a/drivers/media/dvb/frontends/l64781.c b/drivers/media/dvb/frontends/l64781.c index 19b4bf7c21a..1c7c9122447 100644 --- a/drivers/media/dvb/frontends/l64781.c +++ b/drivers/media/dvb/frontends/l64781.c @@ -2,7 +2,7 @@ driver for LSI L64781 COFDM demodulator Copyright (C) 2001 Holger Waechtler for Convergence Integrated Media GmbH - Marko Kohtala <marko.kohtala@luukku.com> + Marko Kohtala <marko.kohtala@luukku.com> This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by @@ -433,7 +433,7 @@ static int l64781_init(struct dvb_frontend* fe) { struct l64781_state* state = fe->demodulator_priv; - reset_and_configure (state); + reset_and_configure (state); /* Power up */ l64781_writereg (state, 0x3e, 0xa5); @@ -456,9 +456,9 @@ static int l64781_init(struct dvb_frontend* fe) l64781_writereg (state, 0x0d, 0x8c); /* With ppm=8000, it seems the DTR_SENSITIVITY will result in - value of 2 with all possible bandwidths and guard - intervals, which is the initial value anyway. */ - /*l64781_writereg (state, 0x19, 0x92);*/ + value of 2 with all possible bandwidths and guard + intervals, which is the initial value anyway. */ + /*l64781_writereg (state, 0x19, 0x92);*/ /* Everything is two's complement, soft bit and CSI_OUT too */ l64781_writereg (state, 0x1e, 0x09); @@ -477,10 +477,10 @@ static int l64781_init(struct dvb_frontend* fe) static int l64781_get_tune_settings(struct dvb_frontend* fe, struct dvb_frontend_tune_settings* fesettings) { - fesettings->min_delay_ms = 4000; - fesettings->step_size = 0; - fesettings->max_drift = 0; - return 0; + fesettings->min_delay_ms = 4000; + fesettings->step_size = 0; + fesettings->max_drift = 0; + return 0; } static void l64781_release(struct dvb_frontend* fe) @@ -522,7 +522,7 @@ struct dvb_frontend* l64781_attach(const struct l64781_config* config, /* The chip always responds to reads */ if (i2c_transfer(state->i2c, msg, 2) != 2) { - dprintk("No response to read on I2C bus\n"); + dprintk("No response to read on I2C bus\n"); goto error; } @@ -531,7 +531,7 @@ struct dvb_frontend* l64781_attach(const struct l64781_config* config, /* Reading the POWER_DOWN register always returns 0 */ if (reg0x3e != 0) { - dprintk("Device doesn't look like L64781\n"); + dprintk("Device doesn't look like L64781\n"); goto error; } @@ -540,7 +540,7 @@ struct dvb_frontend* l64781_attach(const struct l64781_config* config, /* Responds to all reads with 0 */ if (l64781_readreg(state, 0x1a) != 0) { - dprintk("Read 1 returned unexpcted value\n"); + dprintk("Read 1 returned unexpcted value\n"); goto error; } @@ -549,7 +549,7 @@ struct dvb_frontend* l64781_attach(const struct l64781_config* config, /* Responds with register default value */ if (l64781_readreg(state, 0x1a) != 0xa1) { - dprintk("Read 2 returned unexpcted value\n"); + dprintk("Read 2 returned unexpcted value\n"); goto error; } diff --git a/drivers/media/dvb/frontends/l64781.h b/drivers/media/dvb/frontends/l64781.h index 7e30fb0fdfa..947f65f8746 100644 --- a/drivers/media/dvb/frontends/l64781.h +++ b/drivers/media/dvb/frontends/l64781.h @@ -2,7 +2,7 @@ driver for LSI L64781 COFDM demodulator Copyright (C) 2001 Holger Waechtler for Convergence Integrated Media GmbH - Marko Kohtala <marko.kohtala@luukku.com> + Marko Kohtala <marko.kohtala@luukku.com> This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by diff --git a/drivers/media/dvb/frontends/lgdt330x.c b/drivers/media/dvb/frontends/lgdt330x.c index 6a33f5a19a8..cb5301865d0 100644 --- a/drivers/media/dvb/frontends/lgdt330x.c +++ b/drivers/media/dvb/frontends/lgdt330x.c @@ -301,10 +301,10 @@ static int lgdt330x_set_parameters(struct dvb_frontend* fe, static u8 lgdt3303_8vsb_44_data[] = { 0x04, 0x00, 0x0d, 0x40, - 0x0e, 0x87, - 0x0f, 0x8e, - 0x10, 0x01, - 0x47, 0x8b }; + 0x0e, 0x87, + 0x0f, 0x8e, + 0x10, 0x01, + 0x47, 0x8b }; /* * Array of byte pairs <address, value> diff --git a/drivers/media/dvb/frontends/mt312.c b/drivers/media/dvb/frontends/mt312.c index 9c67f406d58..8d672283c93 100644 --- a/drivers/media/dvb/frontends/mt312.c +++ b/drivers/media/dvb/frontends/mt312.c @@ -554,7 +554,7 @@ static int mt312_set_frontend(struct dvb_frontend* fe, if ((ret = mt312_write(state, SYM_RATE_H, buf, sizeof(buf))) < 0) return ret; - mt312_reset(state, 0); + mt312_reset(state, 0); return 0; } @@ -695,7 +695,7 @@ static struct dvb_frontend_ops vp310_mt312_ops = { FE_CAN_FEC_1_2 | FE_CAN_FEC_2_3 | FE_CAN_FEC_3_4 | FE_CAN_FEC_5_6 | FE_CAN_FEC_7_8 | FE_CAN_FEC_AUTO | FE_CAN_QPSK | FE_CAN_MUTE_TS | - FE_CAN_RECOVER + FE_CAN_RECOVER }, .release = mt312_release, diff --git a/drivers/media/dvb/frontends/nxt2002.c b/drivers/media/dvb/frontends/nxt2002.c index 30786b1911b..52c416043a6 100644 --- a/drivers/media/dvb/frontends/nxt2002.c +++ b/drivers/media/dvb/frontends/nxt2002.c @@ -527,7 +527,7 @@ static int nxt2002_read_snr(struct dvb_frontend* fe, u16* snr) else snrdb = 1000*0 + ( 1000*(12-0) * ( temp2 - 0 ) / ( 0x7C00 - 0 ) ); - /* the value reported back from the frontend will be FFFF=32db 0000=0db */ + /* the value reported back from the frontend will be FFFF=32db 0000=0db */ *snr = snrdb * (0xFFFF/32000); @@ -646,7 +646,7 @@ struct dvb_frontend* nxt2002_attach(const struct nxt2002_config* config, memcpy(&state->ops, &nxt2002_ops, sizeof(struct dvb_frontend_ops)); state->initialised = 0; - /* Check the first 5 registers to ensure this a revision we can handle */ + /* Check the first 5 registers to ensure this a revision we can handle */ i2c_readbytes(state, 0x00, buf, 5); if (buf[0] != 0x04) goto error; /* device id */ @@ -672,7 +672,7 @@ static struct dvb_frontend_ops nxt2002_ops = { .type = FE_ATSC, .frequency_min = 54000000, .frequency_max = 860000000, - /* stepsize is just a guess */ + /* stepsize is just a guess */ .frequency_stepsize = 166666, .caps = FE_CAN_FEC_1_2 | FE_CAN_FEC_2_3 | FE_CAN_FEC_3_4 | FE_CAN_FEC_5_6 | FE_CAN_FEC_7_8 | FE_CAN_FEC_AUTO | diff --git a/drivers/media/dvb/frontends/nxt200x.c b/drivers/media/dvb/frontends/nxt200x.c index 84b62881cea..aeafef46e3e 100644 --- a/drivers/media/dvb/frontends/nxt200x.c +++ b/drivers/media/dvb/frontends/nxt200x.c @@ -339,7 +339,7 @@ static int nxt200x_writetuner (struct nxt200x_state* state, u8* data) switch (state->demod_chip) { case NXT2004: if (i2c_writebytes(state, state->config->pll_address, data, 4)) - printk(KERN_WARNING "nxt200x: error writing to tuner\n"); + printk(KERN_WARNING "nxt200x: error writing to tuner\n"); /* wait until we have a lock */ while (count < 20) { i2c_readbytes(state, state->config->pll_address, &buf, 1); @@ -497,7 +497,7 @@ static int nxt2004_load_firmware (struct dvb_frontend* fe, const struct firmware /* calculate firmware CRC */ for (position = 0; position < fw->size; position++) { - crc = nxt200x_crc(crc, fw->data[position]); + crc = nxt200x_crc(crc, fw->data[position]); } buf[0] = rambase >> 8; diff --git a/drivers/media/dvb/frontends/nxt6000.c b/drivers/media/dvb/frontends/nxt6000.c index 88a57b79111..a458a3bfff7 100644 --- a/drivers/media/dvb/frontends/nxt6000.c +++ b/drivers/media/dvb/frontends/nxt6000.c @@ -574,11 +574,11 @@ static struct dvb_frontend_ops nxt6000_ops = { .symbol_rate_max = 9360000, /* FIXME */ .symbol_rate_tolerance = 4000, .caps = FE_CAN_FEC_1_2 | FE_CAN_FEC_2_3 | FE_CAN_FEC_3_4 | - FE_CAN_FEC_4_5 | FE_CAN_FEC_5_6 | FE_CAN_FEC_6_7 | - FE_CAN_FEC_7_8 | FE_CAN_FEC_8_9 | FE_CAN_FEC_AUTO | - FE_CAN_QAM_16 | FE_CAN_QAM_64 | FE_CAN_QAM_AUTO | - FE_CAN_TRANSMISSION_MODE_AUTO | FE_CAN_GUARD_INTERVAL_AUTO | - FE_CAN_HIERARCHY_AUTO, + FE_CAN_FEC_4_5 | FE_CAN_FEC_5_6 | FE_CAN_FEC_6_7 | + FE_CAN_FEC_7_8 | FE_CAN_FEC_8_9 | FE_CAN_FEC_AUTO | + FE_CAN_QAM_16 | FE_CAN_QAM_64 | FE_CAN_QAM_AUTO | + FE_CAN_TRANSMISSION_MODE_AUTO | FE_CAN_GUARD_INTERVAL_AUTO | + FE_CAN_HIERARCHY_AUTO, }, .release = nxt6000_release, diff --git a/drivers/media/dvb/frontends/or51132.c b/drivers/media/dvb/frontends/or51132.c index 78bded861d0..80e0f28127b 100644 --- a/drivers/media/dvb/frontends/or51132.c +++ b/drivers/media/dvb/frontends/or51132.c @@ -503,7 +503,7 @@ static int or51132_read_signal_strength(struct dvb_frontend* fe, u16* strength) rcvr_stat = rec_buf[1]; usK = (rcvr_stat & 0x10) ? 3 : 0; - /* The value reported back from the frontend will be FFFF=100% 0000=0% */ + /* The value reported back from the frontend will be FFFF=100% 0000=0% */ signal_strength = (((8952 - i20Log10(snr_equ) - usK*100)/3+5)*65535)/1000; if (signal_strength > 0xffff) *strength = 0xffff; diff --git a/drivers/media/dvb/frontends/s5h1420.c b/drivers/media/dvb/frontends/s5h1420.c index f265418e326..18715091aed 100644 --- a/drivers/media/dvb/frontends/s5h1420.c +++ b/drivers/media/dvb/frontends/s5h1420.c @@ -494,7 +494,7 @@ static int s5h1420_getfreqoffset(struct s5h1420_state* state) } static void s5h1420_setfec_inversion(struct s5h1420_state* state, - struct dvb_frontend_parameters *p) + struct dvb_frontend_parameters *p) { u8 inversion = 0; @@ -521,8 +521,8 @@ static void s5h1420_setfec_inversion(struct s5h1420_state* state, case FEC_3_4: s5h1420_writereg(state, 0x30, 0x04); - s5h1420_writereg(state, 0x31, 0x12 | inversion); - break; + s5h1420_writereg(state, 0x31, 0x12 | inversion); + break; case FEC_5_6: s5h1420_writereg(state, 0x30, 0x08); diff --git a/drivers/media/dvb/frontends/s5h1420.h b/drivers/media/dvb/frontends/s5h1420.h index 872028ddf2a..73296f13c32 100644 --- a/drivers/media/dvb/frontends/s5h1420.h +++ b/drivers/media/dvb/frontends/s5h1420.h @@ -39,6 +39,6 @@ struct s5h1420_config }; extern struct dvb_frontend* s5h1420_attach(const struct s5h1420_config* config, - struct i2c_adapter* i2c); + struct i2c_adapter* i2c); #endif // S5H1420_H diff --git a/drivers/media/dvb/frontends/sp8870.c b/drivers/media/dvb/frontends/sp8870.c index 1c6b2e9264b..fc06cd6b46c 100644 --- a/drivers/media/dvb/frontends/sp8870.c +++ b/drivers/media/dvb/frontends/sp8870.c @@ -67,16 +67,16 @@ static int debug; static int sp8870_writereg (struct sp8870_state* state, u16 reg, u16 data) { - u8 buf [] = { reg >> 8, reg & 0xff, data >> 8, data & 0xff }; + u8 buf [] = { reg >> 8, reg & 0xff, data >> 8, data & 0xff }; struct i2c_msg msg = { .addr = state->config->demod_address, .flags = 0, .buf = buf, .len = 4 }; int err; - if ((err = i2c_transfer (state->i2c, &msg, 1)) != 1) { + if ((err = i2c_transfer (state->i2c, &msg, 1)) != 1) { dprintk ("%s: writereg error (err == %i, reg == 0x%02x, data == 0x%02x)\n", __FUNCTION__, err, reg, data); return -EREMOTEIO; } - return 0; + return 0; } static int sp8870_readreg (struct sp8870_state* state, u16 reg) @@ -305,7 +305,7 @@ static int sp8870_set_frontend_parameters (struct dvb_frontend* fe, static int sp8870_init (struct dvb_frontend* fe) { struct sp8870_state* state = fe->demodulator_priv; - const struct firmware *fw = NULL; + const struct firmware *fw = NULL; sp8870_wake_up(state); if (state->initialised) return 0; @@ -534,10 +534,10 @@ static int sp8870_sleep(struct dvb_frontend* fe) static int sp8870_get_tune_settings(struct dvb_frontend* fe, struct dvb_frontend_tune_settings* fesettings) { - fesettings->min_delay_ms = 350; - fesettings->step_size = 0; - fesettings->max_drift = 0; - return 0; + fesettings->min_delay_ms = 350; + fesettings->step_size = 0; + fesettings->max_drift = 0; + return 0; } static void sp8870_release(struct dvb_frontend* fe) diff --git a/drivers/media/dvb/frontends/sp887x.c b/drivers/media/dvb/frontends/sp887x.c index 73384e75625..e3b66578224 100644 --- a/drivers/media/dvb/frontends/sp887x.c +++ b/drivers/media/dvb/frontends/sp887x.c @@ -80,7 +80,7 @@ static int sp887x_readreg (struct sp887x_state* state, u16 reg) u8 b1 [2]; int ret; struct i2c_msg msg[] = {{ .addr = state->config->demod_address, .flags = 0, .buf = b0, .len = 2 }, - { .addr = state->config->demod_address, .flags = I2C_M_RD, .buf = b1, .len = 2 }}; + { .addr = state->config->demod_address, .flags = I2C_M_RD, .buf = b1, .len = 2 }}; if ((ret = i2c_transfer(state->i2c, msg, 2)) != 2) { printk("%s: readreg error (ret == %i)\n", __FUNCTION__, ret); @@ -498,7 +498,7 @@ static int sp887x_sleep(struct dvb_frontend* fe) static int sp887x_init(struct dvb_frontend* fe) { struct sp887x_state* state = fe->demodulator_priv; - const struct firmware *fw = NULL; + const struct firmware *fw = NULL; int ret; if (!state->initialised) { @@ -528,10 +528,10 @@ static int sp887x_init(struct dvb_frontend* fe) static int sp887x_get_tune_settings(struct dvb_frontend* fe, struct dvb_frontend_tune_settings* fesettings) { - fesettings->min_delay_ms = 350; - fesettings->step_size = 166666*2; - fesettings->max_drift = (166666*2)+1; - return 0; + fesettings->min_delay_ms = 350; + fesettings->step_size = 166666*2; + fesettings->max_drift = (166666*2)+1; + return 0; } static void sp887x_release(struct dvb_frontend* fe) @@ -581,7 +581,7 @@ static struct dvb_frontend_ops sp887x_ops = { .caps = FE_CAN_FEC_1_2 | FE_CAN_FEC_2_3 | FE_CAN_FEC_3_4 | FE_CAN_FEC_5_6 | FE_CAN_FEC_7_8 | FE_CAN_FEC_AUTO | FE_CAN_QPSK | FE_CAN_QAM_16 | FE_CAN_QAM_64 | - FE_CAN_RECOVER + FE_CAN_RECOVER }, .release = sp887x_release, diff --git a/drivers/media/dvb/frontends/stv0299.c b/drivers/media/dvb/frontends/stv0299.c index 29c48665e13..177d71d56b6 100644 --- a/drivers/media/dvb/frontends/stv0299.c +++ b/drivers/media/dvb/frontends/stv0299.c @@ -95,7 +95,7 @@ static int stv0299_writeregI (struct stv0299_state* state, u8 reg, u8 data) int stv0299_writereg (struct dvb_frontend* fe, u8 reg, u8 data) { - struct stv0299_state* state = fe->demodulator_priv; + struct stv0299_state* state = fe->demodulator_priv; return stv0299_writeregI(state, reg, data); } @@ -220,7 +220,7 @@ static int stv0299_wait_diseqc_idle (struct stv0299_state* state, int timeout) static int stv0299_set_symbolrate (struct dvb_frontend* fe, u32 srate) { - struct stv0299_state* state = fe->demodulator_priv; + struct stv0299_state* state = fe->demodulator_priv; u64 big = srate; u32 ratio; @@ -271,7 +271,7 @@ static int stv0299_get_symbolrate (struct stv0299_state* state) static int stv0299_send_diseqc_msg (struct dvb_frontend* fe, struct dvb_diseqc_master_cmd *m) { - struct stv0299_state* state = fe->demodulator_priv; + struct stv0299_state* state = fe->demodulator_priv; u8 val; int i; @@ -301,7 +301,7 @@ static int stv0299_send_diseqc_msg (struct dvb_frontend* fe, static int stv0299_send_diseqc_burst (struct dvb_frontend* fe, fe_sec_mini_cmd_t burst) { - struct stv0299_state* state = fe->demodulator_priv; + struct stv0299_state* state = fe->demodulator_priv; u8 val; dprintk ("%s\n", __FUNCTION__); @@ -328,7 +328,7 @@ static int stv0299_send_diseqc_burst (struct dvb_frontend* fe, fe_sec_mini_cmd_t static int stv0299_set_tone (struct dvb_frontend* fe, fe_sec_tone_mode_t tone) { - struct stv0299_state* state = fe->demodulator_priv; + struct stv0299_state* state = fe->demodulator_priv; u8 val; if (stv0299_wait_diseqc_idle (state, 100) < 0) @@ -350,7 +350,7 @@ static int stv0299_set_tone (struct dvb_frontend* fe, fe_sec_tone_mode_t tone) static int stv0299_set_voltage (struct dvb_frontend* fe, fe_sec_voltage_t voltage) { - struct stv0299_state* state = fe->demodulator_priv; + struct stv0299_state* state = fe->demodulator_priv; u8 reg0x08; u8 reg0x0c; @@ -442,7 +442,7 @@ static int stv0299_send_legacy_dish_cmd (struct dvb_frontend* fe, u32 cmd) static int stv0299_init (struct dvb_frontend* fe) { - struct stv0299_state* state = fe->demodulator_priv; + struct stv0299_state* state = fe->demodulator_priv; int i; dprintk("stv0299: init chip\n"); @@ -461,7 +461,7 @@ static int stv0299_init (struct dvb_frontend* fe) static int stv0299_read_status(struct dvb_frontend* fe, fe_status_t* status) { - struct stv0299_state* state = fe->demodulator_priv; + struct stv0299_state* state = fe->demodulator_priv; u8 signal = 0xff - stv0299_readreg (state, 0x18); u8 sync = stv0299_readreg (state, 0x1b); @@ -489,7 +489,7 @@ static int stv0299_read_status(struct dvb_frontend* fe, fe_status_t* status) static int stv0299_read_ber(struct dvb_frontend* fe, u32* ber) { - struct stv0299_state* state = fe->demodulator_priv; + struct stv0299_state* state = fe->demodulator_priv; if (state->errmode != STATUS_BER) return 0; *ber = (stv0299_readreg (state, 0x1d) << 8) | stv0299_readreg (state, 0x1e); @@ -499,7 +499,7 @@ static int stv0299_read_ber(struct dvb_frontend* fe, u32* ber) static int stv0299_read_signal_strength(struct dvb_frontend* fe, u16* strength) { - struct stv0299_state* state = fe->demodulator_priv; + struct stv0299_state* state = fe->demodulator_priv; s32 signal = 0xffff - ((stv0299_readreg (state, 0x18) << 8) | stv0299_readreg (state, 0x19)); @@ -516,7 +516,7 @@ static int stv0299_read_signal_strength(struct dvb_frontend* fe, u16* strength) static int stv0299_read_snr(struct dvb_frontend* fe, u16* snr) { - struct stv0299_state* state = fe->demodulator_priv; + struct stv0299_state* state = fe->demodulator_priv; s32 xsnr = 0xffff - ((stv0299_readreg (state, 0x24) << 8) | stv0299_readreg (state, 0x25)); @@ -528,7 +528,7 @@ static int stv0299_read_snr(struct dvb_frontend* fe, u16* snr) static int stv0299_read_ucblocks(struct dvb_frontend* fe, u32* ucblocks) { - struct stv0299_state* state = fe->demodulator_priv; + struct stv0299_state* state = fe->demodulator_priv; if (state->errmode != STATUS_UCBLOCKS) *ucblocks = 0; else *ucblocks = (stv0299_readreg (state, 0x1d) << 8) | stv0299_readreg (state, 0x1e); @@ -538,7 +538,7 @@ static int stv0299_read_ucblocks(struct dvb_frontend* fe, u32* ucblocks) static int stv0299_set_frontend(struct dvb_frontend* fe, struct dvb_frontend_parameters * p) { - struct stv0299_state* state = fe->demodulator_priv; + struct stv0299_state* state = fe->demodulator_priv; int invval = 0; dprintk ("%s : FE_SET_FRONTEND\n", __FUNCTION__); @@ -571,7 +571,7 @@ static int stv0299_set_frontend(struct dvb_frontend* fe, struct dvb_frontend_par static int stv0299_get_frontend(struct dvb_frontend* fe, struct dvb_frontend_parameters * p) { - struct stv0299_state* state = fe->demodulator_priv; + struct stv0299_state* state = fe->demodulator_priv; s32 derot_freq; int invval; @@ -596,7 +596,7 @@ static int stv0299_get_frontend(struct dvb_frontend* fe, struct dvb_frontend_par static int stv0299_sleep(struct dvb_frontend* fe) { - struct stv0299_state* state = fe->demodulator_priv; + struct stv0299_state* state = fe->demodulator_priv; stv0299_writeregI(state, 0x02, 0x80); state->initialised = 0; @@ -606,7 +606,7 @@ static int stv0299_sleep(struct dvb_frontend* fe) static int stv0299_get_tune_settings(struct dvb_frontend* fe, struct dvb_frontend_tune_settings* fesettings) { - struct stv0299_state* state = fe->demodulator_priv; + struct stv0299_state* state = fe->demodulator_priv; fesettings->min_delay_ms = state->config->min_delay_ms; if (fesettings->parameters.u.qpsk.symbol_rate < 10000000) { @@ -658,7 +658,7 @@ struct dvb_frontend* stv0299_attach(const struct stv0299_config* config, /* create dvb_frontend */ state->frontend.ops = &state->ops; - state->frontend.demodulator_priv = state; + state->frontend.demodulator_priv = state; return &state->frontend; error: @@ -714,7 +714,7 @@ MODULE_PARM_DESC(debug, "Turn on/off frontend debugging (default:off)."); MODULE_DESCRIPTION("ST STV0299 DVB Demodulator driver"); MODULE_AUTHOR("Ralph Metzler, Holger Waechtler, Peter Schildmann, Felix Domke, " - "Andreas Oberritter, Andrew de Quincey, Kenneth Aafløy"); + "Andreas Oberritter, Andrew de Quincey, Kenneth Aafløy"); MODULE_LICENSE("GPL"); EXPORT_SYMBOL(stv0299_writereg); diff --git a/drivers/media/dvb/frontends/tda10021.c b/drivers/media/dvb/frontends/tda10021.c index eaf130e666d..425cd19136f 100644 --- a/drivers/media/dvb/frontends/tda10021.c +++ b/drivers/media/dvb/frontends/tda10021.c @@ -1,10 +1,10 @@ /* TDA10021 - Single Chip Cable Channel Receiver driver module - used on the the Siemens DVB-C cards + used on the the Siemens DVB-C cards Copyright (C) 1999 Convergence Integrated Media GmbH <ralph@convergence.de> Copyright (C) 2004 Markus Schulz <msc@antzsystem.de> - Support for TDA10021 + Support for TDA10021 This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by @@ -76,9 +76,9 @@ static u8 tda10021_inittab[0x40]= static int tda10021_writereg (struct tda10021_state* state, u8 reg, u8 data) { - u8 buf[] = { reg, data }; + u8 buf[] = { reg, data }; struct i2c_msg msg = { .addr = state->config->demod_address, .flags = 0, .buf = buf, .len = 2 }; - int ret; + int ret; ret = i2c_transfer (state->i2c, &msg, 1); if (ret != 1) @@ -95,7 +95,7 @@ static u8 tda10021_readreg (struct tda10021_state* state, u8 reg) u8 b0 [] = { reg }; u8 b1 [] = { 0 }; struct i2c_msg msg [] = { { .addr = state->config->demod_address, .flags = 0, .buf = b0, .len = 1 }, - { .addr = state->config->demod_address, .flags = I2C_M_RD, .buf = b1, .len = 1 } }; + { .addr = state->config->demod_address, .flags = I2C_M_RD, .buf = b1, .len = 1 } }; int ret; ret = i2c_transfer (state->i2c, msg, 2); diff --git a/drivers/media/dvb/frontends/tda10021.h b/drivers/media/dvb/frontends/tda10021.h index 7d6a51ce291..53be939e8c5 100644 --- a/drivers/media/dvb/frontends/tda10021.h +++ b/drivers/media/dvb/frontends/tda10021.h @@ -1,10 +1,10 @@ /* TDA10021 - Single Chip Cable Channel Receiver driver module - used on the the Siemens DVB-C cards + used on the the Siemens DVB-C cards Copyright (C) 1999 Convergence Integrated Media GmbH <ralph@convergence.de> Copyright (C) 2004 Markus Schulz <msc@antzsystem.de> - Support for TDA10021 + Support for TDA10021 This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by diff --git a/drivers/media/dvb/frontends/tda1004x.c b/drivers/media/dvb/frontends/tda1004x.c index 7968743826f..dd02aff467f 100644 --- a/drivers/media/dvb/frontends/tda1004x.c +++ b/drivers/media/dvb/frontends/tda1004x.c @@ -475,7 +475,7 @@ static int tda10046_fwupload(struct dvb_frontend* fe) ret = state->config->request_firmware(fe, &fw, TDA10046_DEFAULT_FIRMWARE); if (ret) { printk(KERN_ERR "tda1004x: no firmware upload (timeout or file not found?)\n"); - return ret; + return ret; } tda1004x_write_mask(state, TDA1004X_CONFC4, 8, 8); // going to boot from HOST ret = tda1004x_do_upload(state, fw->data, fw->size, TDA10046H_CODE_CPT, TDA10046H_CODE_IN); diff --git a/drivers/media/dvb/frontends/tda8083.c b/drivers/media/dvb/frontends/tda8083.c index c05cf186105..91baa9cedd7 100644 --- a/drivers/media/dvb/frontends/tda8083.c +++ b/drivers/media/dvb/frontends/tda8083.c @@ -66,13 +66,13 @@ static int tda8083_writereg (struct tda8083_state* state, u8 reg, u8 data) u8 buf [] = { reg, data }; struct i2c_msg msg = { .addr = state->config->demod_address, .flags = 0, .buf = buf, .len = 2 }; - ret = i2c_transfer(state->i2c, &msg, 1); + ret = i2c_transfer(state->i2c, &msg, 1); - if (ret != 1) - dprintk ("%s: writereg error (reg %02x, ret == %i)\n", + if (ret != 1) + dprintk ("%s: writereg error (reg %02x, ret == %i)\n", __FUNCTION__, reg, ret); - return (ret != 1) ? -1 : 0; + return (ret != 1) ? -1 : 0; } static int tda8083_readregs (struct tda8083_state* state, u8 reg1, u8 *b, u8 len) @@ -87,7 +87,7 @@ static int tda8083_readregs (struct tda8083_state* state, u8 reg1, u8 *b, u8 len dprintk ("%s: readreg error (reg %02x, ret == %i)\n", __FUNCTION__, reg1, ret); - return ret == 2 ? 0 : -1; + return ret == 2 ? 0 : -1; } static inline u8 tda8083_readreg (struct tda8083_state* state, u8 reg) @@ -132,14 +132,14 @@ static fe_code_rate_t tda8083_get_fec (struct tda8083_state* state) static int tda8083_set_symbolrate (struct tda8083_state* state, u32 srate) { - u32 ratio; + u32 ratio; u32 tmp; u8 filter; if (srate > 32000000) - srate = 32000000; - if (srate < 500000) - srate = 500000; + srate = 32000000; + if (srate < 500000) + srate = 500000; filter = 0; if (srate < 24000000) @@ -174,7 +174,7 @@ static void tda8083_wait_diseqc_fifo (struct tda8083_state* state, int timeout) unsigned long start = jiffies; while (jiffies - start < timeout && - !(tda8083_readreg(state, 0x02) & 0x80)) + !(tda8083_readreg(state, 0x02) & 0x80)) { msleep(50); }; diff --git a/drivers/media/dvb/ttpci/av7110.c b/drivers/media/dvb/ttpci/av7110.c index 87ea52757a2..992be0be6b1 100644 --- a/drivers/media/dvb/ttpci/av7110.c +++ b/drivers/media/dvb/ttpci/av7110.c @@ -217,10 +217,10 @@ static int arm_thread(void *data) dprintk(4, "%p\n",av7110); - lock_kernel(); - daemonize("arm_mon"); - sigfillset(¤t->blocked); - unlock_kernel(); + lock_kernel(); + daemonize("arm_mon"); + sigfillset(¤t->blocked); + unlock_kernel(); av7110->arm_thread = current; @@ -1535,7 +1535,7 @@ static int alps_bsrv2_pll_set(struct dvb_frontend* fe, struct dvb_frontend_param buf[2] = ((div & 0x18000) >> 10) | 0x95; buf[3] = (pwr << 6) | 0x30; - // NOTE: since we're using a prescaler of 2, we set the + // NOTE: since we're using a prescaler of 2, we set the // divisor frequency to 62.5kHz and divide by 125 above if (i2c_transfer (&av7110->i2c_adap, &msg, 1) != 1) @@ -1811,7 +1811,7 @@ static struct tda8083_config grundig_29504_451_config = { static int philips_cd1516_pll_set(struct dvb_frontend* fe, struct dvb_frontend_parameters* params) { - struct av7110* av7110 = fe->dvb->priv; + struct av7110* av7110 = fe->dvb->priv; u32 div; u32 f = params->frequency; u8 data[4]; @@ -2202,7 +2202,7 @@ static u8 read_pwm(struct av7110* av7110) struct i2c_msg msg[] = { { .addr = 0x50,.flags = 0,.buf = &b,.len = 1 }, { .addr = 0x50,.flags = I2C_M_RD,.buf = &pwm,.len = 1} }; - if ((i2c_transfer(&av7110->i2c_adap, msg, 2) != 2) || (pwm == 0xff)) + if ((i2c_transfer(&av7110->i2c_adap, msg, 2) != 2) || (pwm == 0xff)) pwm = 0x48; return pwm; @@ -2245,7 +2245,7 @@ static int frontend_init(struct av7110 *av7110) } // Try the grundig 29504-451 - av7110->fe = tda8083_attach(&grundig_29504_451_config, &av7110->i2c_adap); + av7110->fe = tda8083_attach(&grundig_29504_451_config, &av7110->i2c_adap); if (av7110->fe) { av7110->fe->ops->diseqc_send_master_cmd = av7110_diseqc_send_master_cmd; av7110->fe->ops->diseqc_send_burst = av7110_diseqc_send_burst; @@ -2271,12 +2271,12 @@ static int frontend_init(struct av7110 *av7110) case 0x0001: // Hauppauge/TT Nexus-T premium rev1.X // ALPS TDLB7 - av7110->fe = sp8870_attach(&alps_tdlb7_config, &av7110->i2c_adap); + av7110->fe = sp8870_attach(&alps_tdlb7_config, &av7110->i2c_adap); break; case 0x0002: // Hauppauge/TT DVB-C premium rev2.X - av7110->fe = ves1820_attach(&alps_tdbe2_config, &av7110->i2c_adap, read_pwm(av7110)); + av7110->fe = ves1820_attach(&alps_tdbe2_config, &av7110->i2c_adap, read_pwm(av7110)); break; case 0x0006: /* Fujitsu-Siemens DVB-S rev 1.6 */ @@ -2421,9 +2421,9 @@ static int av7110_attach(struct saa7146_dev* dev, struct saa7146_pci_extension_d dprintk(4, "dev: %p\n", dev); - /* Set RPS_IRQ to 1 to track rps1 activity. - * Enabling this won't send any interrupt to PC CPU. - */ + /* Set RPS_IRQ to 1 to track rps1 activity. + * Enabling this won't send any interrupt to PC CPU. + */ #define RPS_IRQ 0 if (budgetpatch == 1) { diff --git a/drivers/media/dvb/ttpci/av7110_hw.c b/drivers/media/dvb/ttpci/av7110_hw.c index 7442f56a72e..87106e8bf35 100644 --- a/drivers/media/dvb/ttpci/av7110_hw.c +++ b/drivers/media/dvb/ttpci/av7110_hw.c @@ -1203,15 +1203,15 @@ int av7110_osd_cmd(struct av7110 *av7110, osd_cmd_t *dc) int av7110_osd_capability(struct av7110 *av7110, osd_cap_t *cap) { - switch (cap->cmd) { - case OSD_CAP_MEMSIZE: - if (FW_4M_SDRAM(av7110->arm_app)) - cap->val = 1000000; - else - cap->val = 92000; - return 0; - default: - return -EINVAL; - } + switch (cap->cmd) { + case OSD_CAP_MEMSIZE: + if (FW_4M_SDRAM(av7110->arm_app)) + cap->val = 1000000; + else + cap->val = 92000; + return 0; + default: + return -EINVAL; + } } #endif /* CONFIG_DVB_AV7110_OSD */ diff --git a/drivers/media/dvb/ttpci/av7110_v4l.c b/drivers/media/dvb/ttpci/av7110_v4l.c index 6af74f78b3e..b5aea4129fa 100644 --- a/drivers/media/dvb/ttpci/av7110_v4l.c +++ b/drivers/media/dvb/ttpci/av7110_v4l.c @@ -120,8 +120,8 @@ static int ves1820_writereg(struct saa7146_dev *dev, u8 addr, u8 reg, u8 data) static int stv0297_writereg(struct saa7146_dev *dev, u8 addr, u8 reg, u8 data) { - u8 buf [] = { reg, data }; - struct i2c_msg msg = { .addr = addr, .flags = 0, .buf = buf, .len = 2 }; + u8 buf [] = { reg, data }; + struct i2c_msg msg = { .addr = addr, .flags = 0, .buf = buf, .len = 2 }; if (1 != saa7146_i2c_transfer(dev, &msg, 1, 1)) return -1; diff --git a/drivers/media/dvb/ttpci/budget-core.c b/drivers/media/dvb/ttpci/budget-core.c index 0498a055a4c..017fcbccb8c 100644 --- a/drivers/media/dvb/ttpci/budget-core.c +++ b/drivers/media/dvb/ttpci/budget-core.c @@ -87,7 +87,7 @@ static int start_ts_capture(struct budget *budget) * Pitch: 188, NumBytes3: 188, NumLines3: 1024 */ - switch(budget->card->type) { + switch(budget->card->type) { case BUDGET_FS_ACTIVY: saa7146_write(dev, DD1_INIT, 0x04000000); saa7146_write(dev, MC2, (MASK_09 | MASK_25)); diff --git a/drivers/media/dvb/ttpci/budget-patch.c b/drivers/media/dvb/ttpci/budget-patch.c index 755df81cbc4..fc416cf5253 100644 --- a/drivers/media/dvb/ttpci/budget-patch.c +++ b/drivers/media/dvb/ttpci/budget-patch.c @@ -45,11 +45,11 @@ MAKE_BUDGET_INFO(ttbp, "TT-Budget/Patch DVB-S 1.x PCI", BUDGET_PATCH); //MAKE_BUDGET_INFO(satel,"TT-Budget/Patch SATELCO PCI", BUDGET_TT_HW_DISEQC); static struct pci_device_id pci_tbl[] = { - MAKE_EXTENSION_PCI(ttbp,0x13c2, 0x0000), + MAKE_EXTENSION_PCI(ttbp,0x13c2, 0x0000), // MAKE_EXTENSION_PCI(satel, 0x13c2, 0x1013), - { - .vendor = 0, - } + { + .vendor = 0, + } }; /* those lines are for budget-patch to be tried @@ -165,57 +165,57 @@ static int budget_diseqc_send_burst(struct dvb_frontend* fe, fe_sec_mini_cmd_t m static int budget_av7110_send_fw_cmd(struct budget_patch *budget, u16* buf, int length) { - int i; - - dprintk(2, "budget: %p\n", budget); - - for (i = 2; i < length; i++) - { - ttpci_budget_debiwrite(budget, DEBINOSWAP, COMMAND + 2*i, 2, (u32) buf[i], 0,0); - msleep(5); - } - if (length) - ttpci_budget_debiwrite(budget, DEBINOSWAP, COMMAND + 2, 2, (u32) buf[1], 0,0); - else - ttpci_budget_debiwrite(budget, DEBINOSWAP, COMMAND + 2, 2, 0, 0,0); - msleep(5); - ttpci_budget_debiwrite(budget, DEBINOSWAP, COMMAND, 2, (u32) buf[0], 0,0); - msleep(5); - return 0; + int i; + + dprintk(2, "budget: %p\n", budget); + + for (i = 2; i < length; i++) + { + ttpci_budget_debiwrite(budget, DEBINOSWAP, COMMAND + 2*i, 2, (u32) buf[i], 0,0); + msleep(5); + } + if (length) + ttpci_budget_debiwrite(budget, DEBINOSWAP, COMMAND + 2, 2, (u32) buf[1], 0,0); + else + ttpci_budget_debiwrite(budget, DEBINOSWAP, COMMAND + 2, 2, 0, 0,0); + msleep(5); + ttpci_budget_debiwrite(budget, DEBINOSWAP, COMMAND, 2, (u32) buf[0], 0,0); + msleep(5); + return 0; } static void av7110_set22k(struct budget_patch *budget, int state) { - u16 buf[2] = {( COMTYPE_AUDIODAC << 8) | (state ? ON22K : OFF22K), 0}; + u16 buf[2] = {( COMTYPE_AUDIODAC << 8) | (state ? ON22K : OFF22K), 0}; - dprintk(2, "budget: %p\n", budget); - budget_av7110_send_fw_cmd(budget, buf, 2); + dprintk(2, "budget: %p\n", budget); + budget_av7110_send_fw_cmd(budget, buf, 2); } static int av7110_send_diseqc_msg(struct budget_patch *budget, int len, u8 *msg, int burst) { - int i; - u16 buf[18] = { ((COMTYPE_AUDIODAC << 8) | SendDiSEqC), - 16, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 }; + int i; + u16 buf[18] = { ((COMTYPE_AUDIODAC << 8) | SendDiSEqC), + 16, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 }; - dprintk(2, "budget: %p\n", budget); + dprintk(2, "budget: %p\n", budget); - if (len>10) - len=10; + if (len>10) + len=10; - buf[1] = len+2; - buf[2] = len; + buf[1] = len+2; + buf[2] = len; - if (burst != -1) - buf[3]=burst ? 0x01 : 0x00; - else - buf[3]=0xffff; + if (burst != -1) + buf[3]=burst ? 0x01 : 0x00; + else + buf[3]=0xffff; - for (i=0; i<len; i++) - buf[i+4]=msg[i]; + for (i=0; i<len; i++) + buf[i+4]=msg[i]; - budget_av7110_send_fw_cmd(budget, buf, 18); - return 0; + budget_av7110_send_fw_cmd(budget, buf, 18); + return 0; } static int budget_patch_set_tone(struct dvb_frontend* fe, fe_sec_tone_mode_t tone) @@ -276,7 +276,7 @@ static int alps_bsrv2_pll_set(struct dvb_frontend* fe, struct dvb_frontend_param buf[2] = ((div & 0x18000) >> 10) | 0x95; buf[3] = (pwr << 6) | 0x30; - // NOTE: since we're using a prescaler of 2, we set the + // NOTE: since we're using a prescaler of 2, we set the // divisor frequency to 62.5kHz and divide by 125 above if (i2c_transfer (&budget->i2c_adap, &msg, 1) != 1) return -EIO; @@ -294,7 +294,7 @@ static u8 alps_bsru6_inittab[] = { 0x01, 0x15, 0x02, 0x00, 0x03, 0x00, - 0x04, 0x7d, /* F22FR = 0x7d, F22 = f_VCO / 128 / 0x7d = 22 kHz */ + 0x04, 0x7d, /* F22FR = 0x7d, F22 = f_VCO / 128 / 0x7d = 22 kHz */ 0x05, 0x35, /* I2CT = 0, SCLT = 1, SDAT = 1 */ 0x06, 0x40, /* DAC not used, set to high impendance mode */ 0x07, 0x00, /* DAC LSB */ @@ -413,7 +413,7 @@ static void frontend_init(struct budget_patch* budget) { switch(budget->dev->pci->subsystem_device) { case 0x0000: // Hauppauge/TT WinTV DVB-S rev1.X - case 0x1013: // SATELCO Multimedia PCI + case 0x1013: // SATELCO Multimedia PCI // try the ALPS BSRV2 first of all budget->dvb_frontend = ves1x93_attach(&alps_bsrv2_config, &budget->i2c_adap); @@ -463,8 +463,8 @@ static void frontend_init(struct budget_patch* budget) /* written by Emard */ static int budget_patch_attach (struct saa7146_dev* dev, struct saa7146_pci_extension_data *info) { - struct budget_patch *budget; - int err; + struct budget_patch *budget; + int err; int count = 0; int detected = 0; @@ -472,12 +472,12 @@ static int budget_patch_attach (struct saa7146_dev* dev, struct saa7146_pci_exte #define RPS_IRQ 0 #define HPS_SETUP 0 #if PATCH_RESET - saa7146_write(dev, MC1, MASK_31); - msleep(40); + saa7146_write(dev, MC1, MASK_31); + msleep(40); #endif #if HPS_SETUP - // initialize registers. Better to have it like this - // than leaving something unconfigured + // initialize registers. Better to have it like this + // than leaving something unconfigured saa7146_write(dev, DD1_STREAM_B, 0); // port B VSYNC at rising edge saa7146_write(dev, DD1_INIT, 0x00000200); // have this in budget-core too! @@ -486,29 +486,29 @@ static int budget_patch_attach (struct saa7146_dev* dev, struct saa7146_pci_exte // debi config // saa7146_write(dev, DEBI_CONFIG, MASK_30|MASK_28|MASK_18); - // zero all HPS registers - saa7146_write(dev, HPS_H_PRESCALE, 0); // r68 - saa7146_write(dev, HPS_H_SCALE, 0); // r6c - saa7146_write(dev, BCS_CTRL, 0); // r70 - saa7146_write(dev, HPS_V_SCALE, 0); // r60 - saa7146_write(dev, HPS_V_GAIN, 0); // r64 - saa7146_write(dev, CHROMA_KEY_RANGE, 0); // r74 - saa7146_write(dev, CLIP_FORMAT_CTRL, 0); // r78 - // Set HPS prescaler for port B input - saa7146_write(dev, HPS_CTRL, (1<<30) | (0<<29) | (1<<28) | (0<<12) ); - saa7146_write(dev, MC2, - 0 * (MASK_08 | MASK_24) | // BRS control - 0 * (MASK_09 | MASK_25) | // a - 0 * (MASK_10 | MASK_26) | // b - 1 * (MASK_06 | MASK_22) | // HPS_CTRL1 - 1 * (MASK_05 | MASK_21) | // HPS_CTRL2 - 0 * (MASK_01 | MASK_15) // DEBI - ); + // zero all HPS registers + saa7146_write(dev, HPS_H_PRESCALE, 0); // r68 + saa7146_write(dev, HPS_H_SCALE, 0); // r6c + saa7146_write(dev, BCS_CTRL, 0); // r70 + saa7146_write(dev, HPS_V_SCALE, 0); // r60 + saa7146_write(dev, HPS_V_GAIN, 0); // r64 + saa7146_write(dev, CHROMA_KEY_RANGE, 0); // r74 + saa7146_write(dev, CLIP_FORMAT_CTRL, 0); // r78 + // Set HPS prescaler for port B input + saa7146_write(dev, HPS_CTRL, (1<<30) | (0<<29) | (1<<28) | (0<<12) ); + saa7146_write(dev, MC2, + 0 * (MASK_08 | MASK_24) | // BRS control + 0 * (MASK_09 | MASK_25) | // a + 0 * (MASK_10 | MASK_26) | // b + 1 * (MASK_06 | MASK_22) | // HPS_CTRL1 + 1 * (MASK_05 | MASK_21) | // HPS_CTRL2 + 0 * (MASK_01 | MASK_15) // DEBI + ); #endif // Disable RPS1 and RPS0 - saa7146_write(dev, MC1, ( MASK_29 | MASK_28)); - // RPS1 timeout disable - saa7146_write(dev, RPS_TOV1, 0); + saa7146_write(dev, MC1, ( MASK_29 | MASK_28)); + // RPS1 timeout disable + saa7146_write(dev, RPS_TOV1, 0); // code for autodetection // will wait for VBI_B event (vertical blank at port B) @@ -521,38 +521,38 @@ static int budget_patch_attach (struct saa7146_dev* dev, struct saa7146_pci_exte WRITE_RPS1(cpu_to_le32(CMD_UPLOAD | MASK_10 | MASK_09 | MASK_08 | MASK_06 | MASK_05 | MASK_04 | MASK_03 | MASK_02 )); #endif - WRITE_RPS1(cpu_to_le32(CMD_PAUSE | EVT_VBI_B)); - WRITE_RPS1(cpu_to_le32(CMD_WR_REG_MASK | (GPIO_CTRL>>2))); - WRITE_RPS1(cpu_to_le32(GPIO3_MSK)); - WRITE_RPS1(cpu_to_le32(SAA7146_GPIO_OUTLO<<24)); + WRITE_RPS1(cpu_to_le32(CMD_PAUSE | EVT_VBI_B)); + WRITE_RPS1(cpu_to_le32(CMD_WR_REG_MASK | (GPIO_CTRL>>2))); + WRITE_RPS1(cpu_to_le32(GPIO3_MSK)); + WRITE_RPS1(cpu_to_le32(SAA7146_GPIO_OUTLO<<24)); #if RPS_IRQ - // issue RPS1 interrupt to increment counter - WRITE_RPS1(cpu_to_le32(CMD_INTERRUPT)); - // at least a NOP is neede between two interrupts - WRITE_RPS1(cpu_to_le32(CMD_NOP)); - // interrupt again - WRITE_RPS1(cpu_to_le32(CMD_INTERRUPT)); + // issue RPS1 interrupt to increment counter + WRITE_RPS1(cpu_to_le32(CMD_INTERRUPT)); + // at least a NOP is neede between two interrupts + WRITE_RPS1(cpu_to_le32(CMD_NOP)); + // interrupt again + WRITE_RPS1(cpu_to_le32(CMD_INTERRUPT)); #endif - WRITE_RPS1(cpu_to_le32(CMD_STOP)); + WRITE_RPS1(cpu_to_le32(CMD_STOP)); #if RPS_IRQ - // set event counter 1 source as RPS1 interrupt (0x03) (rE4 p53) - // use 0x03 to track RPS1 interrupts - increase by 1 every gpio3 is toggled - // use 0x15 to track VPE interrupts - increase by 1 every vpeirq() is called - saa7146_write(dev, EC1SSR, (0x03<<2) | 3 ); - // set event counter 1 treshold to maximum allowed value (rEC p55) - saa7146_write(dev, ECT1R, 0x3fff ); + // set event counter 1 source as RPS1 interrupt (0x03) (rE4 p53) + // use 0x03 to track RPS1 interrupts - increase by 1 every gpio3 is toggled + // use 0x15 to track VPE interrupts - increase by 1 every vpeirq() is called + saa7146_write(dev, EC1SSR, (0x03<<2) | 3 ); + // set event counter 1 treshold to maximum allowed value (rEC p55) + saa7146_write(dev, ECT1R, 0x3fff ); #endif - // Fix VSYNC level - saa7146_setgpio(dev, 3, SAA7146_GPIO_OUTLO); - // Set RPS1 Address register to point to RPS code (r108 p42) - saa7146_write(dev, RPS_ADDR1, dev->d_rps1.dma_handle); - // Enable RPS1, (rFC p33) - saa7146_write(dev, MC1, (MASK_13 | MASK_29 )); + // Fix VSYNC level + saa7146_setgpio(dev, 3, SAA7146_GPIO_OUTLO); + // Set RPS1 Address register to point to RPS code (r108 p42) + saa7146_write(dev, RPS_ADDR1, dev->d_rps1.dma_handle); + // Enable RPS1, (rFC p33) + saa7146_write(dev, MC1, (MASK_13 | MASK_29 )); - mdelay(50); - saa7146_setgpio(dev, 3, SAA7146_GPIO_OUTHI); + mdelay(50); + saa7146_setgpio(dev, 3, SAA7146_GPIO_OUTHI); mdelay(150); @@ -560,17 +560,17 @@ static int budget_patch_attach (struct saa7146_dev* dev, struct saa7146_pci_exte detected = 1; #if RPS_IRQ - printk("Event Counter 1 0x%04x\n", saa7146_read(dev, EC1R) & 0x3fff ); + printk("Event Counter 1 0x%04x\n", saa7146_read(dev, EC1R) & 0x3fff ); #endif // Disable RPS1 - saa7146_write(dev, MC1, ( MASK_29 )); + saa7146_write(dev, MC1, ( MASK_29 )); if(detected == 0) - printk("budget-patch not detected or saa7146 in non-default state.\n" - "try enabling ressetting of 7146 with MASK_31 in MC1 register\n"); + printk("budget-patch not detected or saa7146 in non-default state.\n" + "try enabling ressetting of 7146 with MASK_31 in MC1 register\n"); else - printk("BUDGET-PATCH DETECTED.\n"); + printk("BUDGET-PATCH DETECTED.\n"); /* OLD (Original design by Roberto Deza): @@ -641,83 +641,83 @@ static int budget_patch_attach (struct saa7146_dev* dev, struct saa7146_pci_exte */ // Setup RPS1 "program" (p35) - count = 0; + count = 0; - // Wait Source Line Counter Threshold (p36) - WRITE_RPS1(cpu_to_le32(CMD_PAUSE | EVT_HS)); - // Set GPIO3=1 (p42) - WRITE_RPS1(cpu_to_le32(CMD_WR_REG_MASK | (GPIO_CTRL>>2))); - WRITE_RPS1(cpu_to_le32(GPIO3_MSK)); - WRITE_RPS1(cpu_to_le32(SAA7146_GPIO_OUTHI<<24)); + // Wait Source Line Counter Threshold (p36) + WRITE_RPS1(cpu_to_le32(CMD_PAUSE | EVT_HS)); + // Set GPIO3=1 (p42) + WRITE_RPS1(cpu_to_le32(CMD_WR_REG_MASK | (GPIO_CTRL>>2))); + WRITE_RPS1(cpu_to_le32(GPIO3_MSK)); + WRITE_RPS1(cpu_to_le32(SAA7146_GPIO_OUTHI<<24)); #if RPS_IRQ - // issue RPS1 interrupt - WRITE_RPS1(cpu_to_le32(CMD_INTERRUPT)); + // issue RPS1 interrupt + WRITE_RPS1(cpu_to_le32(CMD_INTERRUPT)); #endif - // Wait reset Source Line Counter Threshold (p36) - WRITE_RPS1(cpu_to_le32(CMD_PAUSE | RPS_INV | EVT_HS)); - // Set GPIO3=0 (p42) - WRITE_RPS1(cpu_to_le32(CMD_WR_REG_MASK | (GPIO_CTRL>>2))); - WRITE_RPS1(cpu_to_le32(GPIO3_MSK)); - WRITE_RPS1(cpu_to_le32(SAA7146_GPIO_OUTLO<<24)); + // Wait reset Source Line Counter Threshold (p36) + WRITE_RPS1(cpu_to_le32(CMD_PAUSE | RPS_INV | EVT_HS)); + // Set GPIO3=0 (p42) + WRITE_RPS1(cpu_to_le32(CMD_WR_REG_MASK | (GPIO_CTRL>>2))); + WRITE_RPS1(cpu_to_le32(GPIO3_MSK)); + WRITE_RPS1(cpu_to_le32(SAA7146_GPIO_OUTLO<<24)); #if RPS_IRQ - // issue RPS1 interrupt - WRITE_RPS1(cpu_to_le32(CMD_INTERRUPT)); + // issue RPS1 interrupt + WRITE_RPS1(cpu_to_le32(CMD_INTERRUPT)); #endif - // Jump to begin of RPS program (p37) - WRITE_RPS1(cpu_to_le32(CMD_JUMP)); - WRITE_RPS1(cpu_to_le32(dev->d_rps1.dma_handle)); - - // Fix VSYNC level - saa7146_setgpio(dev, 3, SAA7146_GPIO_OUTLO); - // Set RPS1 Address register to point to RPS code (r108 p42) - saa7146_write(dev, RPS_ADDR1, dev->d_rps1.dma_handle); - // Set Source Line Counter Threshold, using BRS (rCC p43) - // It generates HS event every TS_HEIGHT lines - // this is related to TS_WIDTH set in register - // NUM_LINE_BYTE3 in budget-core.c. If NUM_LINE_BYTE - // low 16 bits are set to TS_WIDTH bytes (TS_WIDTH=2*188 - //,then RPS_THRESH1 - // should be set to trigger every TS_HEIGHT (512) lines. - // - saa7146_write(dev, RPS_THRESH1, (TS_HEIGHT*1) | MASK_12 ); + // Jump to begin of RPS program (p37) + WRITE_RPS1(cpu_to_le32(CMD_JUMP)); + WRITE_RPS1(cpu_to_le32(dev->d_rps1.dma_handle)); - // saa7146_write(dev, RPS_THRESH0, ((TS_HEIGHT/2)<<16) |MASK_28| (TS_HEIGHT/2) |MASK_12 ); - // Enable RPS1 (rFC p33) - saa7146_write(dev, MC1, (MASK_13 | MASK_29)); - - - if (!(budget = kmalloc (sizeof(struct budget_patch), GFP_KERNEL))) - return -ENOMEM; + // Fix VSYNC level + saa7146_setgpio(dev, 3, SAA7146_GPIO_OUTLO); + // Set RPS1 Address register to point to RPS code (r108 p42) + saa7146_write(dev, RPS_ADDR1, dev->d_rps1.dma_handle); + // Set Source Line Counter Threshold, using BRS (rCC p43) + // It generates HS event every TS_HEIGHT lines + // this is related to TS_WIDTH set in register + // NUM_LINE_BYTE3 in budget-core.c. If NUM_LINE_BYTE + // low 16 bits are set to TS_WIDTH bytes (TS_WIDTH=2*188 + //,then RPS_THRESH1 + // should be set to trigger every TS_HEIGHT (512) lines. + // + saa7146_write(dev, RPS_THRESH1, (TS_HEIGHT*1) | MASK_12 ); + + // saa7146_write(dev, RPS_THRESH0, ((TS_HEIGHT/2)<<16) |MASK_28| (TS_HEIGHT/2) |MASK_12 ); + // Enable RPS1 (rFC p33) + saa7146_write(dev, MC1, (MASK_13 | MASK_29)); + + + if (!(budget = kmalloc (sizeof(struct budget_patch), GFP_KERNEL))) + return -ENOMEM; - dprintk(2, "budget: %p\n", budget); + dprintk(2, "budget: %p\n", budget); - if ((err = ttpci_budget_init (budget, dev, info, THIS_MODULE))) { - kfree (budget); - return err; - } + if ((err = ttpci_budget_init (budget, dev, info, THIS_MODULE))) { + kfree (budget); + return err; + } - dev->ext_priv = budget; + dev->ext_priv = budget; budget->dvb_adapter.priv = budget; frontend_init(budget); - return 0; + return 0; } static int budget_patch_detach (struct saa7146_dev* dev) { - struct budget_patch *budget = (struct budget_patch*) dev->ext_priv; - int err; + struct budget_patch *budget = (struct budget_patch*) dev->ext_priv; + int err; if (budget->dvb_frontend) dvb_unregister_frontend(budget->dvb_frontend); - err = ttpci_budget_deinit (budget); + err = ttpci_budget_deinit (budget); - kfree (budget); + kfree (budget); - return err; + return err; } static int __init budget_patch_init(void) @@ -727,20 +727,20 @@ static int __init budget_patch_init(void) static void __exit budget_patch_exit(void) { - saa7146_unregister_extension(&budget_extension); + saa7146_unregister_extension(&budget_extension); } static struct saa7146_extension budget_extension = { - .name = "budget_patch dvb\0", - .flags = 0, + .name = "budget_patch dvb\0", + .flags = 0, - .module = THIS_MODULE, - .pci_tbl = pci_tbl, - .attach = budget_patch_attach, - .detach = budget_patch_detach, + .module = THIS_MODULE, + .pci_tbl = pci_tbl, + .attach = budget_patch_attach, + .detach = budget_patch_detach, - .irq_mask = MASK_10, - .irq_func = ttpci_budget_irq10_handler, + .irq_mask = MASK_10, + .irq_func = ttpci_budget_irq10_handler, }; module_init(budget_patch_init); @@ -749,4 +749,4 @@ module_exit(budget_patch_exit); MODULE_LICENSE("GPL"); MODULE_AUTHOR("Emard, Roberto Deza, Holger Waechtler, Michael Hunold, others"); MODULE_DESCRIPTION("Driver for full TS modified DVB-S SAA7146+AV7110 " - "based so-called Budget Patch cards"); + "based so-called Budget Patch cards"); diff --git a/drivers/media/dvb/ttpci/budget.c b/drivers/media/dvb/ttpci/budget.c index bc4ce7559cb..fafe6407b3d 100644 --- a/drivers/media/dvb/ttpci/budget.c +++ b/drivers/media/dvb/ttpci/budget.c @@ -256,7 +256,7 @@ static int alps_bsrv2_pll_set(struct dvb_frontend* fe, struct dvb_frontend_param buf[2] = ((div & 0x18000) >> 10) | 0x95; buf[3] = (pwr << 6) | 0x30; - // NOTE: since we're using a prescaler of 2, we set the + // NOTE: since we're using a prescaler of 2, we set the // divisor frequency to 62.5kHz and divide by 125 above if (i2c_transfer (&budget->i2c_adap, &msg, 1) != 1) return -EIO; @@ -565,7 +565,7 @@ static u8 read_pwm(struct budget* budget) struct i2c_msg msg[] = { { .addr = 0x50,.flags = 0,.buf = &b,.len = 1 }, { .addr = 0x50,.flags = I2C_M_RD,.buf = &pwm,.len = 1} }; - if ((i2c_transfer(&budget->i2c_adap, msg, 2) != 2) || (pwm == 0xff)) + if ((i2c_transfer(&budget->i2c_adap, msg, 2) != 2) || (pwm == 0xff)) pwm = 0x48; return pwm; @@ -593,7 +593,7 @@ static void frontend_init(struct budget *budget) budget->dvb_frontend = ves1x93_attach(&alps_bsrv2_config, &budget->i2c_adap); if (budget->dvb_frontend) { budget->dvb_frontend->ops->diseqc_send_master_cmd = budget_diseqc_send_master_cmd; - budget->dvb_frontend->ops->diseqc_send_burst = budget_diseqc_send_burst; + budget->dvb_frontend->ops->diseqc_send_burst = budget_diseqc_send_burst; budget->dvb_frontend->ops->set_tone = budget_set_tone; break; } diff --git a/drivers/media/dvb/ttpci/budget.h b/drivers/media/dvb/ttpci/budget.h index c6ef496ba70..fdaa3318ad3 100644 --- a/drivers/media/dvb/ttpci/budget.h +++ b/drivers/media/dvb/ttpci/budget.h @@ -19,7 +19,7 @@ extern int budget_debug; #endif #define dprintk(level,args...) \ - do { if ((budget_debug & level)) { printk("%s: %s(): ",__stringify(KBUILD_MODNAME), __FUNCTION__); printk(args); } } while (0) + do { if ((budget_debug & level)) { printk("%s: %s(): ",__stringify(KBUILD_MODNAME), __FUNCTION__); printk(args); } } while (0) struct budget_info { char *name; diff --git a/drivers/media/dvb/ttpci/fdump.c b/drivers/media/dvb/ttpci/fdump.c index 0b478db3e74..c90001d35e7 100644 --- a/drivers/media/dvb/ttpci/fdump.c +++ b/drivers/media/dvb/ttpci/fdump.c @@ -36,7 +36,7 @@ int main(int argc, char **argv) } fprintf(fd_out, "\n};\n\n"); - + fclose(fd_in); fclose(fd_out); diff --git a/drivers/media/dvb/ttpci/ttpci-eeprom.c b/drivers/media/dvb/ttpci/ttpci-eeprom.c index ac79ef178c0..18aa22b5478 100644 --- a/drivers/media/dvb/ttpci/ttpci-eeprom.c +++ b/drivers/media/dvb/ttpci/ttpci-eeprom.c @@ -13,7 +13,7 @@ Holger Waechtler Convergence Copyright (C) 2002-2003 Ralph Metzler <rjkm@metzlerbros.de> - Metzler Brothers Systementwicklung GbR + Metzler Brothers Systementwicklung GbR This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by @@ -48,41 +48,41 @@ static int check_mac_tt(u8 *buf) { - int i; - u16 tmp = 0xffff; - - for (i = 0; i < 8; i++) { - tmp = (tmp << 8) | ((tmp >> 8) ^ buf[i]); - tmp ^= (tmp >> 4) & 0x0f; - tmp ^= (tmp << 12) ^ ((tmp & 0xff) << 5); - } - tmp ^= 0xffff; - return (((tmp >> 8) ^ buf[8]) | ((tmp & 0xff) ^ buf[9])); + int i; + u16 tmp = 0xffff; + + for (i = 0; i < 8; i++) { + tmp = (tmp << 8) | ((tmp >> 8) ^ buf[i]); + tmp ^= (tmp >> 4) & 0x0f; + tmp ^= (tmp << 12) ^ ((tmp & 0xff) << 5); + } + tmp ^= 0xffff; + return (((tmp >> 8) ^ buf[8]) | ((tmp & 0xff) ^ buf[9])); } static int getmac_tt(u8 * decodedMAC, u8 * encodedMAC) { - u8 xor[20] = { 0x72, 0x23, 0x68, 0x19, 0x5c, 0xa8, 0x71, 0x2c, + u8 xor[20] = { 0x72, 0x23, 0x68, 0x19, 0x5c, 0xa8, 0x71, 0x2c, 0x54, 0xd3, 0x7b, 0xf1, 0x9E, 0x23, 0x16, 0xf6, 0x1d, 0x36, 0x64, 0x78}; - u8 data[20]; - int i; + u8 data[20]; + int i; /* In case there is a sig check failure have the orig contents available */ memcpy(data, encodedMAC, 20); for (i = 0; i < 20; i++) - data[i] ^= xor[i]; - for (i = 0; i < 10; i++) - data[i] = ((data[2 * i + 1] << 8) | data[2 * i]) + data[i] ^= xor[i]; + for (i = 0; i < 10; i++) + data[i] = ((data[2 * i + 1] << 8) | data[2 * i]) >> ((data[2 * i + 1] >> 6) & 3); - if (check_mac_tt(data)) - return -ENODEV; + if (check_mac_tt(data)) + return -ENODEV; decodedMAC[0] = data[2]; decodedMAC[1] = data[1]; decodedMAC[2] = data[0]; decodedMAC[3] = data[6]; decodedMAC[4] = data[5]; decodedMAC[5] = data[4]; - return 0; + return 0; } static int ttpci_eeprom_read_encodedMAC(struct i2c_adapter *adapter, u8 * encodedMAC) diff --git a/drivers/media/dvb/ttusb-budget/dvb-ttusb-budget.c b/drivers/media/dvb/ttusb-budget/dvb-ttusb-budget.c index fd53d601050..104df610dbe 100644 --- a/drivers/media/dvb/ttusb-budget/dvb-ttusb-budget.c +++ b/drivers/media/dvb/ttusb-budget/dvb-ttusb-budget.c @@ -225,8 +225,8 @@ static int ttusb_i2c_msg(struct ttusb *ttusb, err = ttusb_result(ttusb, b, 0x20); - /* check if the i2c transaction was successful */ - if ((snd_len != b[5]) || (rcv_len != b[6])) return -EREMOTEIO; + /* check if the i2c transaction was successful */ + if ((snd_len != b[5]) || (rcv_len != b[6])) return -EREMOTEIO; if (rcv_len > 0) { @@ -489,27 +489,27 @@ static int ttusb_send_diseqc(struct dvb_frontend* fe, static int lnbp21_set_voltage(struct dvb_frontend* fe, fe_sec_voltage_t voltage) { - struct ttusb* ttusb = (struct ttusb*) fe->dvb->priv; - int ret; - u8 data[1]; - struct i2c_msg msg = { .addr = 0x08, .flags = 0, .buf = data, .len = sizeof(data) }; - - switch(voltage) { - case SEC_VOLTAGE_OFF: - data[0] = 0x00; - break; - case SEC_VOLTAGE_13: - data[0] = 0x44; - break; - case SEC_VOLTAGE_18: - data[0] = 0x4c; - break; - default: - return -EINVAL; - }; - - ret = i2c_transfer(&ttusb->i2c_adap, &msg, 1); - return (ret != 1) ? -EIO : 0; + struct ttusb* ttusb = (struct ttusb*) fe->dvb->priv; + int ret; + u8 data[1]; + struct i2c_msg msg = { .addr = 0x08, .flags = 0, .buf = data, .len = sizeof(data) }; + + switch(voltage) { + case SEC_VOLTAGE_OFF: + data[0] = 0x00; + break; + case SEC_VOLTAGE_13: + data[0] = 0x44; + break; + case SEC_VOLTAGE_18: + data[0] = 0x4c; + break; + default: + return -EINVAL; + }; + + ret = i2c_transfer(&ttusb->i2c_adap, &msg, 1); + return (ret != 1) ? -EIO : 0; } static int ttusb_update_lnb(struct ttusb *ttusb) @@ -1184,45 +1184,45 @@ static struct tda1004x_config philips_tdm1316l_config = { }; static u8 alps_bsbe1_inittab[] = { - 0x01, 0x15, - 0x02, 0x30, - 0x03, 0x00, - 0x04, 0x7d, /* F22FR = 0x7d, F22 = f_VCO / 128 / 0x7d = 22 kHz */ - 0x05, 0x35, /* I2CT = 0, SCLT = 1, SDAT = 1 */ - 0x06, 0x40, /* DAC not used, set to high impendance mode */ - 0x07, 0x00, /* DAC LSB */ - 0x08, 0x40, /* DiSEqC off, LNB power on OP2/LOCK pin on */ - 0x09, 0x00, /* FIFO */ - 0x0c, 0x51, /* OP1 ctl = Normal, OP1 val = 1 (LNB Power ON) */ - 0x0d, 0x82, /* DC offset compensation = ON, beta_agc1 = 2 */ - 0x0e, 0x23, /* alpha_tmg = 2, beta_tmg = 3 */ - 0x10, 0x3f, // AGC2 0x3d - 0x11, 0x84, - 0x12, 0xb9, - 0x15, 0xc9, // lock detector threshold - 0x16, 0x00, - 0x17, 0x00, - 0x18, 0x00, - 0x19, 0x00, - 0x1a, 0x00, - 0x1f, 0x50, - 0x20, 0x00, - 0x21, 0x00, - 0x22, 0x00, - 0x23, 0x00, - 0x28, 0x00, // out imp: normal out type: parallel FEC mode:0 - 0x29, 0x1e, // 1/2 threshold - 0x2a, 0x14, // 2/3 threshold - 0x2b, 0x0f, // 3/4 threshold - 0x2c, 0x09, // 5/6 threshold - 0x2d, 0x05, // 7/8 threshold - 0x2e, 0x01, - 0x31, 0x1f, // test all FECs - 0x32, 0x19, // viterbi and synchro search - 0x33, 0xfc, // rs control - 0x34, 0x93, // error control - 0x0f, 0x92, - 0xff, 0xff + 0x01, 0x15, + 0x02, 0x30, + 0x03, 0x00, + 0x04, 0x7d, /* F22FR = 0x7d, F22 = f_VCO / 128 / 0x7d = 22 kHz */ + 0x05, 0x35, /* I2CT = 0, SCLT = 1, SDAT = 1 */ + 0x06, 0x40, /* DAC not used, set to high impendance mode */ + 0x07, 0x00, /* DAC LSB */ + 0x08, 0x40, /* DiSEqC off, LNB power on OP2/LOCK pin on */ + 0x09, 0x00, /* FIFO */ + 0x0c, 0x51, /* OP1 ctl = Normal, OP1 val = 1 (LNB Power ON) */ + 0x0d, 0x82, /* DC offset compensation = ON, beta_agc1 = 2 */ + 0x0e, 0x23, /* alpha_tmg = 2, beta_tmg = 3 */ + 0x10, 0x3f, // AGC2 0x3d + 0x11, 0x84, + 0x12, 0xb9, + 0x15, 0xc9, // lock detector threshold + 0x16, 0x00, + 0x17, 0x00, + 0x18, 0x00, + 0x19, 0x00, + 0x1a, 0x00, + 0x1f, 0x50, + 0x20, 0x00, + 0x21, 0x00, + 0x22, 0x00, + 0x23, 0x00, + 0x28, 0x00, // out imp: normal out type: parallel FEC mode:0 + 0x29, 0x1e, // 1/2 threshold + 0x2a, 0x14, // 2/3 threshold + 0x2b, 0x0f, // 3/4 threshold + 0x2c, 0x09, // 5/6 threshold + 0x2d, 0x05, // 7/8 threshold + 0x2e, 0x01, + 0x31, 0x1f, // test all FECs + 0x32, 0x19, // viterbi and synchro search + 0x33, 0xfc, // rs control + 0x34, 0x93, // error control + 0x0f, 0x92, + 0xff, 0xff }; static u8 alps_bsru6_inittab[] = { @@ -1350,7 +1350,7 @@ static int ttusb_novas_grundig_29504_491_pll_set(struct dvb_frontend *fe, struct u32 div; struct i2c_msg msg = {.addr = 0x61,.flags = 0,.buf = buf,.len = sizeof(buf) }; - div = params->frequency / 125; + div = params->frequency / 125; buf[0] = (div >> 8) & 0x7f; buf[1] = div & 0xff; @@ -1487,7 +1487,7 @@ static int ttusb_probe(struct usb_interface *intf, const struct usb_device_id *i udev = interface_to_usbdev(intf); - if (intf->altsetting->desc.bInterfaceNumber != 1) return -ENODEV; + if (intf->altsetting->desc.bInterfaceNumber != 1) return -ENODEV; if (!(ttusb = kmalloc(sizeof(struct ttusb), GFP_KERNEL))) return -ENOMEM; diff --git a/drivers/media/dvb/ttusb-dec/ttusb_dec.c b/drivers/media/dvb/ttusb-dec/ttusb_dec.c index 832d179f26f..8abc2189012 100644 --- a/drivers/media/dvb/ttusb-dec/ttusb_dec.c +++ b/drivers/media/dvb/ttusb-dec/ttusb_dec.c @@ -1203,7 +1203,7 @@ static int ttusb_init_rc(struct ttusb_dec *dec) input_dev->keycode = rc_keys; for (i = 0; i < ARRAY_SIZE(rc_keys); i++) - set_bit(rc_keys[i], input_dev->keybit); + set_bit(rc_keys[i], input_dev->keybit); input_register_device(input_dev); @@ -1529,7 +1529,7 @@ static void ttusb_dec_exit_rc(struct ttusb_dec *dec) usb_free_urb(dec->irq_urb); usb_buffer_free(dec->udev,IRQ_PACKET_SIZE, - dec->irq_buffer, dec->irq_dma_handle); + dec->irq_buffer, dec->irq_dma_handle); if (dec->rc_input_dev) { input_unregister_device(dec->rc_input_dev); |