diff options
Diffstat (limited to 'drivers/media')
54 files changed, 7801 insertions, 1 deletions
diff --git a/drivers/media/dvb/Kconfig b/drivers/media/dvb/Kconfig index 35d0817126e..cf8f65f309d 100644 --- a/drivers/media/dvb/Kconfig +++ b/drivers/media/dvb/Kconfig @@ -72,6 +72,10 @@ comment "Supported Earthsoft PT1 Adapters" depends on DVB_CORE && PCI && I2C source "drivers/media/dvb/pt1/Kconfig" +comment "Supported Mantis Adapters" + depends on DVB_CORE && PCI && I2C + source "drivers/media/dvb/mantis/Kconfig" + comment "Supported DVB Frontends" depends on DVB_CORE source "drivers/media/dvb/frontends/Kconfig" diff --git a/drivers/media/dvb/Makefile b/drivers/media/dvb/Makefile index 16d262ddb45..c12922c3659 100644 --- a/drivers/media/dvb/Makefile +++ b/drivers/media/dvb/Makefile @@ -2,6 +2,18 @@ # Makefile for the kernel multimedia device drivers. # -obj-y := dvb-core/ frontends/ ttpci/ ttusb-dec/ ttusb-budget/ b2c2/ bt8xx/ dvb-usb/ pluto2/ siano/ dm1105/ pt1/ +obj-y := dvb-core/ \ + frontends/ \ + ttpci/ \ + ttusb-dec/ \ + ttusb-budget/ \ + b2c2/ \ + bt8xx/ \ + dvb-usb/ \ + pluto2/ \ + siano/ \ + dm1105/ \ + pt1/ \ + mantis/ obj-$(CONFIG_DVB_FIREDTV) += firewire/ diff --git a/drivers/media/dvb/frontends/Kconfig b/drivers/media/dvb/frontends/Kconfig index a3b8b697349..cd7f9b7cbff 100644 --- a/drivers/media/dvb/frontends/Kconfig +++ b/drivers/media/dvb/frontends/Kconfig @@ -208,6 +208,14 @@ config DVB_DS3000 help A DVB-S/S2 tuner module. Say Y when you want to support this frontend. +config DVB_MB86A16 + tristate "Fujitsu MB86A16 based" + depends on DVB_CORE && I2C + default m if DVB_FE_CUSTOMISE + help + A DVB-S/DSS Direct Conversion reveiver. + Say Y when you want to support this frontend. + comment "DVB-T (terrestrial) frontends" depends on DVB_CORE @@ -587,6 +595,17 @@ config DVB_ATBM8830 help A DMB-TH tuner module. Say Y when you want to support this frontend. +config DVB_TDA665x + tristate "TDA665x tuner" + depends on DVB_CORE && I2C + default m if DVB_FE_CUSTOMISE + help + Support for tuner modules based on Philips TDA6650/TDA6651 chips. + Say Y when you want to support this chip. + + Currently supported tuners: + * Panasonic ENV57H12D5 (ET-50DT) + comment "Tools to develop new frontends" config DVB_DUMMY_FE diff --git a/drivers/media/dvb/frontends/Makefile b/drivers/media/dvb/frontends/Makefile index 47575cc7b69..874e8ada4d1 100644 --- a/drivers/media/dvb/frontends/Makefile +++ b/drivers/media/dvb/frontends/Makefile @@ -64,6 +64,7 @@ obj-$(CONFIG_DVB_TDA10048) += tda10048.o obj-$(CONFIG_DVB_TUNER_CX24113) += cx24113.o obj-$(CONFIG_DVB_S5H1411) += s5h1411.o obj-$(CONFIG_DVB_LGS8GL5) += lgs8gl5.o +obj-$(CONFIG_DVB_TDA665x) += tda665x.o obj-$(CONFIG_DVB_LGS8GXX) += lgs8gxx.o obj-$(CONFIG_DVB_ATBM8830) += atbm8830.o obj-$(CONFIG_DVB_DUMMY_FE) += dvb_dummy_fe.o @@ -80,3 +81,4 @@ obj-$(CONFIG_DVB_STV6110x) += stv6110x.o obj-$(CONFIG_DVB_ISL6423) += isl6423.o obj-$(CONFIG_DVB_EC100) += ec100.o obj-$(CONFIG_DVB_DS3000) += ds3000.o +obj-$(CONFIG_DVB_MB86A16) += mb86a16.o diff --git a/drivers/media/dvb/frontends/mb86a16.c b/drivers/media/dvb/frontends/mb86a16.c new file mode 100644 index 00000000000..d05f7500e0c --- /dev/null +++ b/drivers/media/dvb/frontends/mb86a16.c @@ -0,0 +1,1878 @@ +/* + Fujitsu MB86A16 DVB-S/DSS DC Receiver driver + + Copyright (C) Manu Abraham (abraham.manu@gmail.com) + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +*/ + +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/moduleparam.h> + +#include "dvb_frontend.h" +#include "mb86a16.h" +#include "mb86a16_priv.h" + +unsigned int verbose = 5; +module_param(verbose, int, 0644); + +#define ABS(x) ((x) < 0 ? (-x) : (x)) + +struct mb86a16_state { + struct i2c_adapter *i2c_adap; + const struct mb86a16_config *config; + struct dvb_frontend frontend; + + /* tuning parameters */ + int frequency; + int srate; + + /* Internal stuff */ + int master_clk; + int deci; + int csel; + int rsel; +}; + +#define MB86A16_ERROR 0 +#define MB86A16_NOTICE 1 +#define MB86A16_INFO 2 +#define MB86A16_DEBUG 3 + +#define dprintk(x, y, z, format, arg...) do { \ + if (z) { \ + if ((x > MB86A16_ERROR) && (x > y)) \ + printk(KERN_ERR "%s: " format "\n", __func__, ##arg); \ + else if ((x > MB86A16_NOTICE) && (x > y)) \ + printk(KERN_NOTICE "%s: " format "\n", __func__, ##arg); \ + else if ((x > MB86A16_INFO) && (x > y)) \ + printk(KERN_INFO "%s: " format "\n", __func__, ##arg); \ + else if ((x > MB86A16_DEBUG) && (x > y)) \ + printk(KERN_DEBUG "%s: " format "\n", __func__, ##arg); \ + } else { \ + if (x > y) \ + printk(format, ##arg); \ + } \ +} while (0) + +#define TRACE_IN dprintk(verbose, MB86A16_DEBUG, 1, "-->()") +#define TRACE_OUT dprintk(verbose, MB86A16_DEBUG, 1, "()-->") + +static int mb86a16_write(struct mb86a16_state *state, u8 reg, u8 val) +{ + int ret; + u8 buf[] = { reg, val }; + + struct i2c_msg msg = { + .addr = state->config->demod_address, + .flags = 0, + .buf = buf, + .len = 2 + }; + + dprintk(verbose, MB86A16_DEBUG, 1, + "writing to [0x%02x],Reg[0x%02x],Data[0x%02x]", + state->config->demod_address, buf[0], buf[1]); + + ret = i2c_transfer(state->i2c_adap, &msg, 1); + + return (ret != 1) ? -EREMOTEIO : 0; +} + +static int mb86a16_read(struct mb86a16_state *state, u8 reg, u8 *val) +{ + int ret; + u8 b0[] = { reg }; + u8 b1[] = { 0 }; + + struct i2c_msg msg[] = { + { + .addr = state->config->demod_address, + .flags = 0, + .buf = b0, + .len = 1 + }, { + .addr = state->config->demod_address, + .flags = I2C_M_RD, + .buf = b1, + .len = 1 + } + }; + ret = i2c_transfer(state->i2c_adap, msg, 2); + if (ret != 2) { + dprintk(verbose, MB86A16_ERROR, 1, "read error(reg=0x%02x, ret=0x%i)", + reg, ret); + + return -EREMOTEIO; + } + *val = b1[0]; + + return ret; +} + +static int CNTM_set(struct mb86a16_state *state, + unsigned char timint1, + unsigned char timint2, + unsigned char cnext) +{ + unsigned char val; + + val = (timint1 << 4) | (timint2 << 2) | cnext; + if (mb86a16_write(state, MB86A16_CNTMR, val) < 0) + goto err; + + return 0; + +err: + dprintk(verbose, MB86A16_ERROR, 1, "I2C transfer error"); + return -EREMOTEIO; +} + +static int smrt_set(struct mb86a16_state *state, int rate) +{ + int tmp ; + int m ; + unsigned char STOFS0, STOFS1; + + m = 1 << state->deci; + tmp = (8192 * state->master_clk - 2 * m * rate * 8192 + state->master_clk / 2) / state->master_clk; + + STOFS0 = tmp & 0x0ff; + STOFS1 = (tmp & 0xf00) >> 8; + + if (mb86a16_write(state, MB86A16_SRATE1, (state->deci << 2) | + (state->csel << 1) | + state->rsel) < 0) + goto err; + if (mb86a16_write(state, MB86A16_SRATE2, STOFS0) < 0) + goto err; + if (mb86a16_write(state, MB86A16_SRATE3, STOFS1) < 0) + goto err; + + return 0; +err: + dprintk(verbose, MB86A16_ERROR, 1, "I2C transfer error"); + return -1; +} + +static int srst(struct mb86a16_state *state) +{ + if (mb86a16_write(state, MB86A16_RESET, 0x04) < 0) + goto err; + + return 0; +err: + dprintk(verbose, MB86A16_ERROR, 1, "I2C transfer error"); + return -EREMOTEIO; + +} + +static int afcex_data_set(struct mb86a16_state *state, + unsigned char AFCEX_L, + unsigned char AFCEX_H) +{ + if (mb86a16_write(state, MB86A16_AFCEXL, AFCEX_L) < 0) + goto err; + if (mb86a16_write(state, MB86A16_AFCEXH, AFCEX_H) < 0) + goto err; + + return 0; +err: + dprintk(verbose, MB86A16_ERROR, 1, "I2C transfer error"); + + return -1; +} + +static int afcofs_data_set(struct mb86a16_state *state, + unsigned char AFCEX_L, + unsigned char AFCEX_H) +{ + if (mb86a16_write(state, 0x58, AFCEX_L) < 0) + goto err; + if (mb86a16_write(state, 0x59, AFCEX_H) < 0) + goto err; + + return 0; +err: + dprintk(verbose, MB86A16_ERROR, 1, "I2C transfer error"); + return -EREMOTEIO; +} + +static int stlp_set(struct mb86a16_state *state, + unsigned char STRAS, + unsigned char STRBS) +{ + if (mb86a16_write(state, MB86A16_STRFILTCOEF1, (STRBS << 3) | (STRAS)) < 0) + goto err; + + return 0; +err: + dprintk(verbose, MB86A16_ERROR, 1, "I2C transfer error"); + return -EREMOTEIO; +} + +static int Vi_set(struct mb86a16_state *state, unsigned char ETH, unsigned char VIA) +{ + if (mb86a16_write(state, MB86A16_VISET2, 0x04) < 0) + goto err; + if (mb86a16_write(state, MB86A16_VISET3, 0xf5) < 0) + goto err; + + return 0; +err: + dprintk(verbose, MB86A16_ERROR, 1, "I2C transfer error"); + return -EREMOTEIO; +} + +static int initial_set(struct mb86a16_state *state) +{ + if (stlp_set(state, 5, 7)) + goto err; + + udelay(100); + if (afcex_data_set(state, 0, 0)) + goto err; + + udelay(100); + if (afcofs_data_set(state, 0, 0)) + goto err; + + udelay(100); + if (mb86a16_write(state, MB86A16_CRLFILTCOEF1, 0x16) < 0) + goto err; + if (mb86a16_write(state, 0x2f, 0x21) < 0) + goto err; + if (mb86a16_write(state, MB86A16_VIMAG, 0x38) < 0) + goto err; + if (mb86a16_write(state, MB86A16_FAGCS1, 0x00) < 0) + goto err; + if (mb86a16_write(state, MB86A16_FAGCS2, 0x1c) < 0) + goto err; + if (mb86a16_write(state, MB86A16_FAGCS3, 0x20) < 0) + goto err; + if (mb86a16_write(state, MB86A16_FAGCS4, 0x1e) < 0) + goto err; + if (mb86a16_write(state, MB86A16_FAGCS5, 0x23) < 0) + goto err; + if (mb86a16_write(state, 0x54, 0xff) < 0) + goto err; + if (mb86a16_write(state, MB86A16_TSOUT, 0x00) < 0) + goto err; + + return 0; + +err: + dprintk(verbose, MB86A16_ERROR, 1, "I2C transfer error"); + return -EREMOTEIO; +} + +static int S01T_set(struct mb86a16_state *state, + unsigned char s1t, + unsigned s0t) +{ + if (mb86a16_write(state, 0x33, (s1t << 3) | s0t) < 0) + goto err; + + return 0; +err: + dprintk(verbose, MB86A16_ERROR, 1, "I2C transfer error"); + return -EREMOTEIO; +} + + +static int EN_set(struct mb86a16_state *state, + int cren, + int afcen) +{ + unsigned char val; + + val = 0x7a | (cren << 7) | (afcen << 2); + if (mb86a16_write(state, 0x49, val) < 0) + goto err; + + return 0; +err: + dprintk(verbose, MB86A16_ERROR, 1, "I2C transfer error"); + return -EREMOTEIO; +} + +static int AFCEXEN_set(struct mb86a16_state *state, + int afcexen, + int smrt) +{ + unsigned char AFCA ; + + if (smrt > 18875) + AFCA = 4; + else if (smrt > 9375) + AFCA = 3; + else if (smrt > 2250) + AFCA = 2; + else + AFCA = 1; + + if (mb86a16_write(state, 0x2a, 0x02 | (afcexen << 5) | (AFCA << 2)) < 0) + goto err; + + return 0; + +err: + dprintk(verbose, MB86A16_ERROR, 1, "I2C transfer error"); + return -EREMOTEIO; +} + +static int DAGC_data_set(struct mb86a16_state *state, + unsigned char DAGCA, + unsigned char DAGCW) +{ + if (mb86a16_write(state, 0x2d, (DAGCA << 3) | DAGCW) < 0) + goto err; + + return 0; + +err: + dprintk(verbose, MB86A16_ERROR, 1, "I2C transfer error"); + return -EREMOTEIO; +} + +static void smrt_info_get(struct mb86a16_state *state, int rate) +{ + if (rate >= 37501) { + state->deci = 0; state->csel = 0; state->rsel = 0; + } else if (rate >= 30001) { + state->deci = 0; state->csel = 0; state->rsel = 1; + } else if (rate >= 26251) { + state->deci = 0; state->csel = 1; state->rsel = 0; + } else if (rate >= 22501) { + state->deci = 0; state->csel = 1; state->rsel = 1; + } else if (rate >= 18751) { + state->deci = 1; state->csel = 0; state->rsel = 0; + } else if (rate >= 15001) { + state->deci = 1; state->csel = 0; state->rsel = 1; + } else if (rate >= 13126) { + state->deci = 1; state->csel = 1; state->rsel = 0; + } else if (rate >= 11251) { + state->deci = 1; state->csel = 1; state->rsel = 1; + } else if (rate >= 9376) { + state->deci = 2; state->csel = 0; state->rsel = 0; + } else if (rate >= 7501) { + state->deci = 2; state->csel = 0; state->rsel = 1; + } else if (rate >= 6563) { + state->deci = 2; state->csel = 1; state->rsel = 0; + } else if (rate >= 5626) { + state->deci = 2; state->csel = 1; state->rsel = 1; + } else if (rate >= 4688) { + state->deci = 3; state->csel = 0; state->rsel = 0; + } else if (rate >= 3751) { + state->deci = 3; state->csel = 0; state->rsel = 1; + } else if (rate >= 3282) { + state->deci = 3; state->csel = 1; state->rsel = 0; + } else if (rate >= 2814) { + state->deci = 3; state->csel = 1; state->rsel = 1; + } else if (rate >= 2344) { + state->deci = 4; state->csel = 0; state->rsel = 0; + } else if (rate >= 1876) { + state->deci = 4; state->csel = 0; state->rsel = 1; + } else if (rate >= 1641) { + state->deci = 4; state->csel = 1; state->rsel = 0; + } else if (rate >= 1407) { + state->deci = 4; state->csel = 1; state->rsel = 1; + } else if (rate >= 1172) { + state->deci = 5; state->csel = 0; state->rsel = 0; + } else if (rate >= 939) { + state->deci = 5; state->csel = 0; state->rsel = 1; + } else if (rate >= 821) { + state->deci = 5; state->csel = 1; state->rsel = 0; + } else { + state->deci = 5; state->csel = 1; state->rsel = 1; + } + + if (state->csel == 0) + state->master_clk = 92000; + else + state->master_clk = 61333; + +} + +static int signal_det(struct mb86a16_state *state, + int smrt, + unsigned char *SIG) +{ + + int ret ; + int smrtd ; + int wait_sym ; + + u32 wait_t; + unsigned char S[3] ; + int i ; + + if (*SIG > 45) { + if (CNTM_set(state, 2, 1, 2) < 0) { + dprintk(verbose, MB86A16_ERROR, 1, "CNTM set Error"); + return -1; + } + wait_sym = 40000; + } else { + if (CNTM_set(state, 3, 1, 2) < 0) { + dprintk(verbose, MB86A16_ERROR, 1, "CNTM set Error"); + return -1; + } + wait_sym = 80000; + } + for (i = 0; i < 3; i++) { + if (i == 0) + smrtd = smrt * 98 / 100; + else if (i == 1) + smrtd = smrt; + else + smrtd = smrt * 102 / 100; + smrt_info_get(state, smrtd); + smrt_set(state, smrtd); + srst(state); + wait_t = (wait_sym + 99 * smrtd / 100) / smrtd; + if (wait_t == 0) + wait_t = 1; + msleep_interruptible(10); + if (mb86a16_read(state, 0x37, &(S[i])) != 2) { + dprintk(verbose, MB86A16_ERROR, 1, "I2C transfer error"); + return -EREMOTEIO; + } + } + if ((S[1] > S[0] * 112 / 100) && + (S[1] > S[2] * 112 / 100)) { + + ret = 1; + } else { + ret = 0; + } + *SIG = S[1]; + + if (CNTM_set(state, 0, 1, 2) < 0) { + dprintk(verbose, MB86A16_ERROR, 1, "CNTM set Error"); + return -1; + } + + return ret; +} + +static int rf_val_set(struct mb86a16_state *state, + int f, + int smrt, + unsigned char R) +{ + unsigned char C, F, B; + int M; + unsigned char rf_val[5]; + int ack = -1; + + if (smrt > 37750) + C = 1; + else if (smrt > 18875) + C = 2; + else if (smrt > 5500) + C = 3; + else + C = 4; + + if (smrt > 30500) + F = 3; + else if (smrt > 9375) + F = 1; + else if (smrt > 4625) + F = 0; + else + F = 2; + + if (f < 1060) + B = 0; + else if (f < 1175) + B = 1; + else if (f < 1305) + B = 2; + else if (f < 1435) + B = 3; + else if (f < 1570) + B = 4; + else if (f < 1715) + B = 5; + else if (f < 1845) + B = 6; + else if (f < 1980) + B = 7; + else if (f < 2080) + B = 8; + else + B = 9; + + M = f * (1 << R) / 2; + + rf_val[0] = 0x01 | (C << 3) | (F << 1); + rf_val[1] = (R << 5) | ((M & 0x1f000) >> 12); + rf_val[2] = (M & 0x00ff0) >> 4; + rf_val[3] = ((M & 0x0000f) << 4) | B; + + /* Frequency Set */ + if (mb86a16_write(state, 0x21, rf_val[0]) < 0) + ack = 0; + if (mb86a16_write(state, 0x22, rf_val[1]) < 0) + ack = 0; + if (mb86a16_write(state, 0x23, rf_val[2]) < 0) + ack = 0; + if (mb86a16_write(state, 0x24, rf_val[3]) < 0) + ack = 0; + if (mb86a16_write(state, 0x25, 0x01) < 0) + ack = 0; + if (ack == 0) { + dprintk(verbose, MB86A16_ERROR, 1, "RF Setup - I2C transfer error"); + return -EREMOTEIO; + } + + return 0; +} + +static int afcerr_chk(struct mb86a16_state *state) +{ + unsigned char AFCM_L, AFCM_H ; + int AFCM ; + int afcm, afcerr ; + + if (mb86a16_read(state, 0x0e, &AFCM_L) != 2) + goto err; + if (mb86a16_read(state, 0x0f, &AFCM_H) != 2) + goto err; + + AFCM = (AFCM_H << 8) + AFCM_L; + + if (AFCM > 2048) + afcm = AFCM - 4096; + else + afcm = AFCM; + afcerr = afcm * state->master_clk / 8192; + + return afcerr; + +err: + dprintk(verbose, MB86A16_ERROR, 1, "I2C transfer error"); + return -EREMOTEIO; +} + +static int dagcm_val_get(struct mb86a16_state *state) +{ + int DAGCM; + unsigned char DAGCM_H, DAGCM_L; + + if (mb86a16_read(state, 0x45, &DAGCM_L) != 2) + goto err; + if (mb86a16_read(state, 0x46, &DAGCM_H) != 2) + goto err; + + DAGCM = (DAGCM_H << 8) + DAGCM_L; + + return DAGCM; + +err: + dprintk(verbose, MB86A16_ERROR, 1, "I2C transfer error"); + return -EREMOTEIO; +} + +static int mb86a16_read_status(struct dvb_frontend *fe, fe_status_t *status) +{ + u8 stat, stat2; + struct mb86a16_state *state = fe->demodulator_priv; + + *status = 0; + + if (mb86a16_read(state, MB86A16_SIG1, &stat) != 2) + goto err; + if (mb86a16_read(state, MB86A16_SIG2, &stat2) != 2) + goto err; + if ((stat > 25) && (stat2 > 25)) + *status |= FE_HAS_SIGNAL; + if ((stat > 45) && (stat2 > 45)) + *status |= FE_HAS_CARRIER; + + if (mb86a16_read(state, MB86A16_STATUS, &stat) != 2) + goto err; + + if (stat & 0x01) + *status |= FE_HAS_SYNC; + if (stat & 0x01) + *status |= FE_HAS_VITERBI; + + if (mb86a16_read(state, MB86A16_FRAMESYNC, &stat) != 2) + goto err; + + if ((stat & 0x0f) && (*status & FE_HAS_VITERBI)) + *status |= FE_HAS_LOCK; + + return 0; + +err: + dprintk(verbose, MB86A16_ERROR, 1, "I2C transfer error"); + return -EREMOTEIO; +} + +static int sync_chk(struct mb86a16_state *state, + unsigned char *VIRM) +{ + unsigned char val; + int sync; + + if (mb86a16_read(state, 0x0d, &val) != 2) + goto err; + + dprintk(verbose, MB86A16_INFO, 1, "Status = %02x,", val); + sync = val & 0x01; + *VIRM = (val & 0x1c) >> 2; + + return sync; +err: + dprintk(verbose, MB86A16_ERROR, 1, "I2C transfer error"); + return -EREMOTEIO; + +} + +static int freqerr_chk(struct mb86a16_state *state, + int fTP, + int smrt, + int unit) +{ + unsigned char CRM, AFCML, AFCMH; + unsigned char temp1, temp2, temp3; + int crm, afcm, AFCM; + int crrerr, afcerr; /* kHz */ + int frqerr; /* MHz */ + int afcen, afcexen = 0; + int R, M, fOSC, fOSC_OFS; + + if (mb86a16_read(state, 0x43, &CRM) != 2) + goto err; + + if (CRM > 127) + crm = CRM - 256; + else + crm = CRM; + + crrerr = smrt * crm / 256; + if (mb86a16_read(state, 0x49, &temp1) != 2) + goto err; + + afcen = (temp1 & 0x04) >> 2; + if (afcen == 0) { + if (mb86a16_read(state, 0x2a, &temp1) != 2) + goto err; + afcexen = (temp1 & 0x20) >> 5; + } + + if (afcen == 1) { + if (mb86a16_read(state, 0x0e, &AFCML) != 2) + goto err; + if (mb86a16_read(state, 0x0f, &AFCMH) != 2) + goto err; + } else if (afcexen == 1) { + if (mb86a16_read(state, 0x2b, &AFCML) != 2) + goto err; + if (mb86a16_read(state, 0x2c, &AFCMH) != 2) + goto err; + } + if ((afcen == 1) || (afcexen == 1)) { + smrt_info_get(state, smrt); + AFCM = ((AFCMH & 0x01) << 8) + AFCML; + if (AFCM > 255) + afcm = AFCM - 512; + else + afcm = AFCM; + + afcerr = afcm * state->master_clk / 8192; + } else + afcerr = 0; + + if (mb86a16_read(state, 0x22, &temp1) != 2) + goto err; + if (mb86a16_read(state, 0x23, &temp2) != 2) + goto err; + if (mb86a16_read(state, 0x24, &temp3) != 2) + goto err; + + R = (temp1 & 0xe0) >> 5; + M = ((temp1 & 0x1f) << 12) + (temp2 << 4) + (temp3 >> 4); + if (R == 0) + fOSC = 2 * M; + else + fOSC = M; + + fOSC_OFS = fOSC - fTP; + + if (unit == 0) { /* MHz */ + if (crrerr + afcerr + fOSC_OFS * 1000 >= 0) + frqerr = (crrerr + afcerr + fOSC_OFS * 1000 + 500) / 1000; + else + frqerr = (crrerr + afcerr + fOSC_OFS * 1000 - 500) / 1000; + } else { /* kHz */ + frqerr = crrerr + afcerr + fOSC_OFS * 1000; + } + + return frqerr; +err: + dprintk(verbose, MB86A16_ERROR, 1, "I2C transfer error"); + return -EREMOTEIO; +} + +static unsigned char vco_dev_get(struct mb86a16_state *state, int smrt) +{ + unsigned char R; + + if (smrt > 9375) + R = 0; + else + R = 1; + + return R; +} + +static void swp_info_get(struct mb86a16_state *state, + int fOSC_start, + int smrt, + int v, int R, + int swp_ofs, + int *fOSC, + int *afcex_freq, + unsigned char *AFCEX_L, + unsigned char *AFCEX_H) +{ + int AFCEX ; + int crnt_swp_freq ; + + crnt_swp_freq = fOSC_start * 1000 + v * swp_ofs; + + if (R == 0) + *fOSC = (crnt_swp_freq + 1000) / 2000 * 2; + else + *fOSC = (crnt_swp_freq + 500) / 1000; + + if (*fOSC >= crnt_swp_freq) + *afcex_freq = *fOSC * 1000 - crnt_swp_freq; + else + *afcex_freq = crnt_swp_freq - *fOSC * 1000; + + AFCEX = *afcex_freq * 8192 / state->master_clk; + *AFCEX_L = AFCEX & 0x00ff; + *AFCEX_H = (AFCEX & 0x0f00) >> 8; +} + + +static int swp_freq_calcuation(struct mb86a16_state *state, int i, int v, int *V, int vmax, int vmin, + int SIGMIN, int fOSC, int afcex_freq, int swp_ofs, unsigned char *SIG1) +{ + int swp_freq ; + + if ((i % 2 == 1) && (v <= vmax)) { + /* positive v (case 1) */ + if ((v - 1 == vmin) && + (*(V + 30 + v) >= 0) && + (*(V + 30 + v - 1) >= 0) && + (*(V + 30 + v - 1) > *(V + 30 + v)) && + (*(V + 30 + v - 1) > SIGMIN)) { + + swp_freq = fOSC * 1000 + afcex_freq - swp_ofs; + *SIG1 = *(V + 30 + v - 1); + } else if ((v == vmax) && + (*(V + 30 + v) >= 0) && + (*(V + 30 + v - 1) >= 0) && + (*(V + 30 + v) > *(V + 30 + v - 1)) && + (*(V + 30 + v) > SIGMIN)) { + /* (case 2) */ + swp_freq = fOSC * 1000 + afcex_freq; + *SIG1 = *(V + 30 + v); + } else if ((*(V + 30 + v) > 0) && + (*(V + 30 + v - 1) > 0) && + (*(V + 30 + v - 2) > 0) && + (*(V + 30 + v - 3) > 0) && + (*(V + 30 + v - 1) > *(V + 30 + v)) && + (*(V + 30 + v - 2) > *(V + 30 + v - 3)) && + ((*(V + 30 + v - 1) > SIGMIN) || + (*(V + 30 + v - 2) > SIGMIN))) { + /* (case 3) */ + if (*(V + 30 + v - 1) >= *(V + 30 + v - 2)) { + swp_freq = fOSC * 1000 + afcex_freq - swp_ofs; + *SIG1 = *(V + 30 + v - 1); + } else { + swp_freq = fOSC * 1000 + afcex_freq - swp_ofs * 2; + *SIG1 = *(V + 30 + v - 2); + } + } else if ((v == vmax) && + (*(V + 30 + v) >= 0) && + (*(V + 30 + v - 1) >= 0) && + (*(V + 30 + v - 2) >= 0) && + (*(V + 30 + v) > *(V + 30 + v - 2)) && + (*(V + 30 + v - 1) > *(V + 30 + v - 2)) && + ((*(V + 30 + v) > SIGMIN) || + (*(V + 30 + v - 1) > SIGMIN))) { + /* (case 4) */ + if (*(V + 30 + v) >= *(V + 30 + v - 1)) { + swp_freq = fOSC * 1000 + afcex_freq; + *SIG1 = *(V + 30 + v); + } else { + swp_freq = fOSC * 1000 + afcex_freq - swp_ofs; + *SIG1 = *(V + 30 + v - 1); + } + } else { + swp_freq = -1 ; + } + } else if ((i % 2 == 0) && (v >= vmin)) { + /* Negative v (case 1) */ + if ((*(V + 30 + v) > 0) && + (*(V + 30 + v + 1) > 0) && + (*(V + 30 + v + 2) > 0) && + (*(V + 30 + v + 1) > *(V + 30 + v)) && + (*(V + 30 + v + 1) > *(V + 30 + v + 2)) && + (*(V + 30 + v + 1) > SIGMIN)) { + + swp_freq = fOSC * 1000 + afcex_freq + swp_ofs; + *SIG1 = *(V + 30 + v + 1); + } else if ((v + 1 == vmax) && + (*(V + 30 + v) >= 0) && + (*(V + 30 + v + 1) >= 0) && + (*(V + 30 + v + 1) > *(V + 30 + v)) && + (*(V + 30 + v + 1) > SIGMIN)) { + /* (case 2) */ + swp_freq = fOSC * 1000 + afcex_freq + swp_ofs; + *SIG1 = *(V + 30 + v); + } else if ((v == vmin) && + (*(V + 30 + v) > 0) && + (*(V + 30 + v + 1) > 0) && + (*(V + 30 + v + 2) > 0) && + (*(V + 30 + v) > *(V + 30 + v + 1)) && + (*(V + 30 + v) > *(V + 30 + v + 2)) && + (*(V + 30 + v) > SIGMIN)) { + /* (case 3) */ + swp_freq = fOSC * 1000 + afcex_freq; + *SIG1 = *(V + 30 + v); + } else if ((*(V + 30 + v) >= 0) && + (*(V + 30 + v + 1) >= 0) && + (*(V + 30 + v + 2) >= 0) && + (*(V + 30 + v + 3) >= 0) && + (*(V + 30 + v + 1) > *(V + 30 + v)) && + (*(V + 30 + v + 2) > *(V + 30 + v + 3)) && + ((*(V + 30 + v + 1) > SIGMIN) || + (*(V + 30 + v + 2) > SIGMIN))) { + /* (case 4) */ + if (*(V + 30 + v + 1) >= *(V + 30 + v + 2)) { + swp_freq = fOSC * 1000 + afcex_freq + swp_ofs; + *SIG1 = *(V + 30 + v + 1); + } else { + swp_freq = fOSC * 1000 + afcex_freq + swp_ofs * 2; + *SIG1 = *(V + 30 + v + 2); + } + } else if ((*(V + 30 + v) >= 0) && + (*(V + 30 + v + 1) >= 0) && + (*(V + 30 + v + 2) >= 0) && + (*(V + 30 + v + 3) >= 0) && + (*(V + 30 + v) > *(V + 30 + v + 2)) && + (*(V + 30 + v + 1) > *(V + 30 + v + 2)) && + (*(V + 30 + v) > *(V + 30 + v + 3)) && + (*(V + 30 + v + 1) > *(V + 30 + v + 3)) && + ((*(V + 30 + v) > SIGMIN) || + (*(V + 30 + v + 1) > SIGMIN))) { + /* (case 5) */ + if (*(V + 30 + v) >= *(V + 30 + v + 1)) { + swp_freq = fOSC * 1000 + afcex_freq; + *SIG1 = *(V + 30 + v); + } else { + swp_freq = fOSC * 1000 + afcex_freq + swp_ofs; + *SIG1 = *(V + 30 + v + 1); + } + } else if ((v + 2 == vmin) && + (*(V + 30 + v) >= 0) && + (*(V + 30 + v + 1) >= 0) && + (*(V + 30 + v + 2) >= 0) && + (*(V + 30 + v + 1) > *(V + 30 + v)) && + (*(V + 30 + v + 2) > *(V + 30 + v)) && + ((*(V + 30 + v + 1) > SIGMIN) || + (*(V + 30 + v + 2) > SIGMIN))) { + /* (case 6) */ + if (*(V + 30 + v + 1) >= *(V + 30 + v + 2)) { + swp_freq = fOSC * 1000 + afcex_freq + swp_ofs; + *SIG1 = *(V + 30 + v + 1); + } else { + swp_freq = fOSC * 1000 + afcex_freq + swp_ofs * 2; + *SIG1 = *(V + 30 + v + 2); + } + } else if ((vmax == 0) && (vmin == 0) && (*(V + 30 + v) > SIGMIN)) { + swp_freq = fOSC * 1000; + *SIG1 = *(V + 30 + v); + } else + swp_freq = -1; + } else + swp_freq = -1; + + return swp_freq; +} + +static void swp_info_get2(struct mb86a16_state *state, + int smrt, + int R, + int swp_freq, + int *afcex_freq, + int *fOSC, + unsigned char *AFCEX_L, + unsigned char *AFCEX_H) +{ + int AFCEX ; + + if (R == 0) + *fOSC = (swp_freq + 1000) / 2000 * 2; + else + *fOSC = (swp_freq + 500) / 1000; + + if (*fOSC >= swp_freq) + *afcex_freq = *fOSC * 1000 - swp_freq; + else + *afcex_freq = swp_freq - *fOSC * 1000; + + AFCEX = *afcex_freq * 8192 / state->master_clk; + *AFCEX_L = AFCEX & 0x00ff; + *AFCEX_H = (AFCEX & 0x0f00) >> 8; +} + +static void afcex_info_get(struct mb86a16_state *state, + int afcex_freq, + unsigned char *AFCEX_L, + unsigned char *AFCEX_H) +{ + int AFCEX ; + + AFCEX = afcex_freq * 8192 / state->master_clk; + *AFCEX_L = AFCEX & 0x00ff; + *AFCEX_H = (AFCEX & 0x0f00) >> 8; +} + +static int SEQ_set(struct mb86a16_state *state, unsigned char loop) +{ + /* SLOCK0 = 0 */ + if (mb86a16_write(state, 0x32, 0x02 | (loop << 2)) < 0) { + dprintk(verbose, MB86A16_ERROR, 1, "I2C transfer error"); + return -EREMOTEIO; + } + + return 0; +} + +static int iq_vt_set(struct mb86a16_state *state, unsigned char IQINV) +{ + /* Viterbi Rate, IQ Settings */ + if (mb86a16_write(state, 0x06, 0xdf | (IQINV << 5)) < 0) { + dprintk(verbose, MB86A16_ERROR, 1, "I2C transfer error"); + return -EREMOTEIO; + } + + return 0; +} + +static int FEC_srst(struct mb86a16_state *state) +{ + if (mb86a16_write(state, MB86A16_RESET, 0x02) < 0) { + dprintk(verbose, MB86A16_ERROR, 1, "I2C transfer error"); + return -EREMOTEIO; + } + + return 0; +} + +static int S2T_set(struct mb86a16_state *state, unsigned char S2T) +{ + if (mb86a16_write(state, 0x34, 0x70 | S2T) < 0) { + dprintk(verbose, MB86A16_ERROR, 1, "I2C transfer error"); + return -EREMOTEIO; + } + + return 0; +} + +static int S45T_set(struct mb86a16_state *state, unsigned char S4T, unsigned char S5T) +{ + if (mb86a16_write(state, 0x35, 0x00 | (S5T << 4) | S4T) < 0) { + dprintk(verbose, MB86A16_ERROR, 1, "I2C transfer error"); + return -EREMOTEIO; + } + + return 0; +} + + +static int mb86a16_set_fe(struct mb86a16_state *state) +{ + u8 agcval, cnmval; + + int i, j; + int fOSC = 0; + int fOSC_start = 0; + int wait_t; + int fcp; + int swp_ofs; + int V[60]; + u8 SIG1MIN; + + unsigned char CREN, AFCEN, AFCEXEN; + unsigned char SIG1; + unsigned char TIMINT1, TIMINT2, TIMEXT; + unsigned char S0T, S1T; + unsigned char S2T; +/* unsigned char S2T, S3T; */ + unsigned char S4T, S5T; + unsigned char AFCEX_L, AFCEX_H; + unsigned char R; + unsigned char VIRM; + unsigned char ETH, VIA; + unsigned char junk; + + int loop; + int ftemp; + int v, vmax, vmin; + int vmax_his, vmin_his; + int swp_freq, prev_swp_freq[20]; + int prev_freq_num; + int signal_dupl; + int afcex_freq; + int signal; + int afcerr; + int temp_freq, delta_freq; + int dagcm[4]; + int smrt_d; +/* int freq_err; */ + int n; + int ret = -1; + int sync; + + dprintk(verbose, MB86A16_INFO, 1, "freq=%d Mhz, symbrt=%d Ksps", state->frequency, state->srate); + + fcp = 3000; + swp_ofs = state->srate / 4; + + for (i = 0; i < 60; i++) + V[i] = -1; + + for (i = 0; i < 20; i++) + prev_swp_freq[i] = 0; + + SIG1MIN = 25; + + for (n = 0; ((n < 3) && (ret == -1)); n++) { + SEQ_set(state, 0); + iq_vt_set(state, 0); + + CREN = 0; + AFCEN = 0; + AFCEXEN = 1; + TIMINT1 = 0; + TIMINT2 = 1; + TIMEXT = 2; + S1T = 0; + S0T = 0; + + if (initial_set(state) < 0) { + dprintk(verbose, MB86A16_ERROR, 1, "initial set failed"); + return -1; + } + if (DAGC_data_set(state, 3, 2) < 0) { + dprintk(verbose, MB86A16_ERROR, 1, "DAGC data set error"); + return -1; + } + if (EN_set(state, CREN, AFCEN) < 0) { + dprintk(verbose, MB86A16_ERROR, 1, "EN set error"); + return -1; /* (0, 0) */ + } + if (AFCEXEN_set(state, AFCEXEN, state->srate) < 0) { + dprintk(verbose, MB86A16_ERROR, 1, "AFCEXEN set error"); + return -1; /* (1, smrt) = (1, symbolrate) */ + } + if (CNTM_set(state, TIMINT1, TIMINT2, TIMEXT) < 0) { + dprintk(verbose, MB86A16_ERROR, 1, "CNTM set error"); + return -1; /* (0, 1, 2) */ + } + if (S01T_set(state, S1T, S0T) < 0) { + dprintk(verbose, MB86A16_ERROR, 1, "S01T set error"); + return -1; /* (0, 0) */ + } + smrt_info_get(state, state->srate); + if (smrt_set(state, state->srate) < 0) { + dprintk(verbose, MB86A16_ERROR, 1, "smrt info get error"); + return -1; + } + + R = vco_dev_get(state, state->srate); + if (R == 1) + fOSC_start = state->frequency; + + else if (R == 0) { + if (state->frequency % 2 == 0) { + fOSC_start = state->frequency; + } else { + fOSC_start = state->frequency + 1; + if (fOSC_start > 2150) + fOSC_start = state->frequency - 1; + } + } + loop = 1; + ftemp = fOSC_start * 1000; + vmax = 0 ; + while (loop == 1) { + ftemp = ftemp + swp_ofs; + vmax++; + + /* Upper bound */ + if (ftemp > 2150000) { + loop = 0; + vmax--; + } else { + if ((ftemp == 2150000) || + (ftemp - state->frequency * 1000 >= fcp + state->srate / 4)) + loop = 0; + } + } + + loop = 1; + ftemp = fOSC_start * 1000; + vmin = 0 ; + while (loop == 1) { + ftemp = ftemp - swp_ofs; + vmin--; + + /* Lower bound */ + if (ftemp < 950000) { + loop = 0; + vmin++; + } else { + if ((ftemp == 950000) || + (state->frequency * 1000 - ftemp >= fcp + state->srate / 4)) + loop = 0; + } + } + + wait_t = (8000 + state->srate / 2) / state->srate; + if (wait_t == 0) + wait_t = 1; + + i = 0; + j = 0; + prev_freq_num = 0; + loop = 1; + signal = 0; + vmax_his = 0; + vmin_his = 0; + v = 0; + + while (loop == 1) { + swp_info_get(state, fOSC_start, state->srate, + v, R, swp_ofs, &fOSC, + &afcex_freq, &AFCEX_L, &AFCEX_H); + + udelay(100); + if (rf_val_set(state, fOSC, state->srate, R) < 0) { + dprintk(verbose, MB86A16_ERROR, 1, "rf val set error"); + return -1; + } + udelay(100); + if (afcex_data_set(state, AFCEX_L, AFCEX_H) < 0) { + dprintk(verbose, MB86A16_ERROR, 1, "afcex data set error"); + return -1; + } + if (srst(state) < 0) { + dprintk(verbose, MB86A16_ERROR, 1, "srst error"); + return -1; + } + msleep_interruptible(wait_t); + + if (mb86a16_read(state, 0x37, &SIG1) != 2) { + dprintk(verbose, MB86A16_ERROR, 1, "I2C transfer error"); + return -1; + } + V[30 + v] = SIG1 ; + swp_freq = swp_freq_calcuation(state, i, v, V, vmax, vmin, + SIG1MIN, fOSC, afcex_freq, + swp_ofs, &SIG1); /* changed */ + + signal_dupl = 0; + for (j = 0; j < prev_freq_num; j++) { + if ((ABS(prev_swp_freq[j] - swp_freq)) < (swp_ofs * 3 / 2)) { + signal_dupl = 1; + dprintk(verbose, MB86A16_INFO, 1, "Probably Duplicate Signal, j = %d", j); + } + } + if ((signal_dupl == 0) && (swp_freq > 0) && (ABS(swp_freq - state->frequency * 1000) < fcp + state->srate / 6)) { + dprintk(verbose, MB86A16_DEBUG, 1, "------ Signal detect ------ [swp_freq=[%07d, srate=%05d]]", swp_freq, state->srate); + prev_swp_freq[prev_freq_num] = swp_freq; + prev_freq_num++; + swp_info_get2(state, state->srate, R, swp_freq, + &afcex_freq, &fOSC, + &AFCEX_L, &AFCEX_H); + + if (rf_val_set(state, fOSC, state->srate, R) < 0) { + dprintk(verbose, MB86A16_ERROR, 1, "rf val set error"); + return -1; + } + if (afcex_data_set(state, AFCEX_L, AFCEX_H) < 0) { + dprintk(verbose, MB86A16_ERROR, 1, "afcex data set error"); + return -1; + } + signal = signal_det(state, state->srate, &SIG1); + if (signal == 1) { + dprintk(verbose, MB86A16_ERROR, 1, "***** Signal Found *****"); + loop = 0; + } else { + dprintk(verbose, MB86A16_ERROR, 1, "!!!!! No signal !!!!!, try again..."); + smrt_info_get(state, state->srate); + if (smrt_set(state, state->srate) < 0) { + dprintk(verbose, MB86A16_ERROR, 1, "smrt set error"); + return -1; + } + } + } + if (v > vmax) + vmax_his = 1 ; + if (v < vmin) + vmin_his = 1 ; + i++; + + if ((i % 2 == 1) && (vmax_his == 1)) + i++; + if ((i % 2 == 0) && (vmin_his == 1)) + i++; + + if (i % 2 == 1) + v = (i + 1) / 2; + else + v = -i / 2; + + if ((vmax_his == 1) && (vmin_his == 1)) + loop = 0 ; + } + + if (signal == 1) { + dprintk(verbose, MB86A16_INFO, 1, " Start Freq Error Check"); + S1T = 7 ; + S0T = 1 ; + CREN = 0 ; + AFCEN = 1 ; + AFCEXEN = 0 ; + + if (S01T_set(state, S1T, S0T) < 0) { + dprintk(verbose, MB86A16_ERROR, 1, "S01T set error"); + return -1; + } + smrt_info_get(state, state->srate); + if (smrt_set(state, state->srate) < 0) { + dprintk(verbose, MB86A16_ERROR, 1, "smrt set error"); + return -1; + } + if (EN_set(state, CREN, AFCEN) < 0) { + dprintk(verbose, MB86A16_ERROR, 1, "EN set error"); + return -1; + } + if (AFCEXEN_set(state, AFCEXEN, state->srate) < 0) { + dprintk(verbose, MB86A16_ERROR, 1, "AFCEXEN set error"); + return -1; + } + afcex_info_get(state, afcex_freq, &AFCEX_L, &AFCEX_H); + if (afcofs_data_set(state, AFCEX_L, AFCEX_H) < 0) { + dprintk(verbose, MB86A16_ERROR, 1, "AFCOFS data set error"); + return -1; + } + if (srst(state) < 0) { + dprintk(verbose, MB86A16_ERROR, 1, "srst error"); + return -1; + } + /* delay 4~200 */ + wait_t = 200000 / state->master_clk + 200000 / state->srate; + msleep(wait_t); + afcerr = afcerr_chk(state); + if (afcerr == -1) + return -1; + + swp_freq = fOSC * 1000 + afcerr ; + AFCEXEN = 1 ; + if (state->srate >= 1500) + smrt_d = state->srate / 3; + else + smrt_d = state->srate / 2; + smrt_info_get(state, smrt_d); + if (smrt_set(state, smrt_d) < 0) { + dprintk(verbose, MB86A16_ERROR, 1, "smrt set error"); + return -1; + } + if (AFCEXEN_set(state, AFCEXEN, smrt_d) < 0) { + dprintk(verbose, MB86A16_ERROR, 1, "AFCEXEN set error"); + return -1; + } + R = vco_dev_get(state, smrt_d); + if (DAGC_data_set(state, 2, 0) < 0) { + dprintk(verbose, MB86A16_ERROR, 1, "DAGC data set error"); + return -1; + } + for (i = 0; i < 3; i++) { + temp_freq = swp_freq + (i - 1) * state->srate / 8; + swp_info_get2(state, smrt_d, R, temp_freq, &afcex_freq, &fOSC, &AFCEX_L, &AFCEX_H); + if (rf_val_set(state, fOSC, smrt_d, R) < 0) { + dprintk(verbose, MB86A16_ERROR, 1, "rf val set error"); + return -1; + } + if (afcex_data_set(state, AFCEX_L, AFCEX_H) < 0) { + dprintk(verbose, MB86A16_ERROR, 1, "afcex data set error"); + return -1; + } + wait_t = 200000 / state->master_clk + 40000 / smrt_d; + msleep(wait_t); + dagcm[i] = dagcm_val_get(state); + } + if ((dagcm[0] > dagcm[1]) && + (dagcm[0] > dagcm[2]) && + (dagcm[0] - dagcm[1] > 2 * (dagcm[2] - dagcm[1]))) { + + temp_freq = swp_freq - 2 * state->srate / 8; + swp_info_get2(state, smrt_d, R, temp_freq, &afcex_freq, &fOSC, &AFCEX_L, &AFCEX_H); + if (rf_val_set(state, fOSC, smrt_d, R) < 0) { + dprintk(verbose, MB86A16_ERROR, 1, "rf val set error"); + return -1; + } + if (afcex_data_set(state, AFCEX_L, AFCEX_H) < 0) { + dprintk(verbose, MB86A16_ERROR, 1, "afcex data set"); + return -1; + } + wait_t = 200000 / state->master_clk + 40000 / smrt_d; + msleep(wait_t); + dagcm[3] = dagcm_val_get(state); + if (dagcm[3] > dagcm[1]) + delta_freq = (dagcm[2] - dagcm[0] + dagcm[1] - dagcm[3]) * state->srate / 300; + else + delta_freq = 0; + } else if ((dagcm[2] > dagcm[1]) && + (dagcm[2] > dagcm[0]) && + (dagcm[2] - dagcm[1] > 2 * (dagcm[0] - dagcm[1]))) { + + temp_freq = swp_freq + 2 * state->srate / 8; + swp_info_get2(state, smrt_d, R, temp_freq, &afcex_freq, &fOSC, &AFCEX_L, &AFCEX_H); + if (rf_val_set(state, fOSC, smrt_d, R) < 0) { + dprintk(verbose, MB86A16_ERROR, 1, "rf val set"); + return -1; + } + if (afcex_data_set(state, AFCEX_L, AFCEX_H) < 0) { + dprintk(verbose, MB86A16_ERROR, 1, "afcex data set"); + return -1; + } + wait_t = 200000 / state->master_clk + 40000 / smrt_d; + msleep(wait_t); + dagcm[3] = dagcm_val_get(state); + if (dagcm[3] > dagcm[1]) + delta_freq = (dagcm[2] - dagcm[0] + dagcm[3] - dagcm[1]) * state->srate / 300; + else + delta_freq = 0 ; + + } else { + delta_freq = 0 ; + } + dprintk(verbose, MB86A16_INFO, 1, "SWEEP Frequency = %d", swp_freq); + swp_freq += delta_freq; + dprintk(verbose, MB86A16_INFO, 1, "Adjusting .., DELTA Freq = %d, SWEEP Freq=%d", delta_freq, swp_freq); + if (ABS(state->frequency * 1000 - swp_freq) > 3800) { + dprintk(verbose, MB86A16_INFO, 1, "NO -- SIGNAL !"); + } else { + + S1T = 0; + S0T = 3; + CREN = 1; + AFCEN = 0; + AFCEXEN = 1; + + if (S01T_set(state, S1T, S0T) < 0) { + dprintk(verbose, MB86A16_ERROR, 1, "S01T set error"); + return -1; + } + if (DAGC_data_set(state, 0, 0) < 0) { + dprintk(verbose, MB86A16_ERROR, 1, "DAGC data set error"); + return -1; + } + R = vco_dev_get(state, state->srate); + smrt_info_get(state, state->srate); + if (smrt_set(state, state->srate) < 0) { + dprintk(verbose, MB86A16_ERROR, 1, "smrt set error"); + return -1; + } + if (EN_set(state, CREN, AFCEN) < 0) { + dprintk(verbose, MB86A16_ERROR, 1, "EN set error"); + return -1; + } + if (AFCEXEN_set(state, AFCEXEN, state->srate) < 0) { + dprintk(verbose, MB86A16_ERROR, 1, "AFCEXEN set error"); + return -1; + } + swp_info_get2(state, state->srate, R, swp_freq, &afcex_freq, &fOSC, &AFCEX_L, &AFCEX_H); + if (rf_val_set(state, fOSC, state->srate, R) < 0) { + dprintk(verbose, MB86A16_ERROR, 1, "rf val set error"); + return -1; + } + if (afcex_data_set(state, AFCEX_L, AFCEX_H) < 0) { + dprintk(verbose, MB86A16_ERROR, 1, "afcex data set error"); + return -1; + } + if (srst(state) < 0) { + dprintk(verbose, MB86A16_ERROR, 1, "srst error"); + return -1; + } + wait_t = 7 + (10000 + state->srate / 2) / state->srate; + if (wait_t == 0) + wait_t = 1; + msleep_interruptible(wait_t); + if (mb86a16_read(state, 0x37, &SIG1) != 2) { + dprintk(verbose, MB86A16_ERROR, 1, "I2C transfer error"); + return -EREMOTEIO; + } + + if (SIG1 > 110) { + S2T = 4; S4T = 1; S5T = 6; ETH = 4; VIA = 6; + wait_t = 7 + (917504 + state->srate / 2) / state->srate; + } else if (SIG1 > 105) { + S2T = 4; S4T = 2; S5T = 8; ETH = 7; VIA = 2; + wait_t = 7 + (1048576 + state->srate / 2) / state->srate; + } else if (SIG1 > 85) { + S2T = 5; S4T = 2; S5T = 8; ETH = 7; VIA = 2; + wait_t = 7 + (1310720 + state->srate / 2) / state->srate; + } else if (SIG1 > 65) { + S2T = 6; S4T = 2; S5T = 8; ETH = 7; VIA = 2; + wait_t = 7 + (1572864 + state->srate / 2) / state->srate; + } else { + S2T = 7; S4T = 2; S5T = 8; ETH = 7; VIA = 2; + wait_t = 7 + (2097152 + state->srate / 2) / state->srate; + } + wait_t *= 2; /* FOS */ + S2T_set(state, S2T); + S45T_set(state, S4T, S5T); + Vi_set(state, ETH, VIA); + srst(state); + msleep_interruptible(wait_t); + sync = sync_chk(state, &VIRM); + dprintk(verbose, MB86A16_INFO, 1, "-------- Viterbi=[%d] SYNC=[%d] ---------", VIRM, sync); + if (VIRM) { + if (VIRM == 4) { + /* 5/6 */ + if (SIG1 > 110) + wait_t = (786432 + state->srate / 2) / state->srate; + else + wait_t = (1572864 + state->srate / 2) / state->srate; + if (state->srate < 5000) + /* FIXME ! , should be a long wait ! */ + msleep_interruptible(wait_t); + else + msleep_interruptible(wait_t); + + if (sync_chk(state, &junk) == 0) { + iq_vt_set(state, 1); + FEC_srst(state); + } + } + /* 1/2, 2/3, 3/4, 7/8 */ + if (SIG1 > 110) + wait_t = (786432 + state->srate / 2) / state->srate; + else + wait_t = (1572864 + state->srate / 2) / state->srate; + msleep_interruptible(wait_t); + SEQ_set(state, 1); + } else { + dprintk(verbose, MB86A16_INFO, 1, "NO -- SYNC"); + SEQ_set(state, 1); + ret = -1; + } + } + } else { + dprintk(verbose, MB86A16_INFO, 1, "NO -- SIGNAL"); + ret = -1; + } + + sync = sync_chk(state, &junk); + if (sync) { + dprintk(verbose, MB86A16_INFO, 1, "******* SYNC *******"); + freqerr_chk(state, state->frequency, state->srate, 1); + ret = 0; + break; + } + } + + mb86a16_read(state, 0x15, &agcval); + mb86a16_read(state, 0x26, &cnmval); + dprintk(verbose, MB86A16_INFO, 1, "AGC = %02x CNM = %02x", agcval, cnmval); + + return ret; +} + +static int mb86a16_send_diseqc_msg(struct dvb_frontend *fe, + struct dvb_diseqc_master_cmd *cmd) +{ + struct mb86a16_state *state = fe->demodulator_priv; + int i; + u8 regs; + + if (mb86a16_write(state, MB86A16_DCC1, MB86A16_DCC1_DISTA) < 0) + goto err; + if (mb86a16_write(state, MB86A16_DCCOUT, 0x00) < 0) + goto err; + if (mb86a16_write(state, MB86A16_TONEOUT2, 0x04) < 0) + goto err; + + regs = 0x18; + + if (cmd->msg_len > 5 || cmd->msg_len < 4) + return -EINVAL; + + for (i = 0; i < cmd->msg_len; i++) { + if (mb86a16_write(state, regs, cmd->msg[i]) < 0) + goto err; + + regs++; + } + i += 0x90; + + msleep_interruptible(10); + + if (mb86a16_write(state, MB86A16_DCC1, i) < 0) + goto err; + if (mb86a16_write(state, MB86A16_DCCOUT, MB86A16_DCCOUT_DISEN) < 0) + goto err; + + return 0; + +err: + dprintk(verbose, MB86A16_ERROR, 1, "I2C transfer error"); + return -EREMOTEIO; +} + +static int mb86a16_send_diseqc_burst(struct dvb_frontend *fe, fe_sec_mini_cmd_t burst) +{ + struct mb86a16_state *state = fe->demodulator_priv; + + switch (burst) { + case SEC_MINI_A: + if (mb86a16_write(state, MB86A16_DCC1, MB86A16_DCC1_DISTA | + MB86A16_DCC1_TBEN | + MB86A16_DCC1_TBO) < 0) + goto err; + if (mb86a16_write(state, MB86A16_DCCOUT, MB86A16_DCCOUT_DISEN) < 0) + goto err; + break; + case SEC_MINI_B: + if (mb86a16_write(state, MB86A16_DCC1, MB86A16_DCC1_DISTA | + MB86A16_DCC1_TBEN) < 0) + goto err; + if (mb86a16_write(state, MB86A16_DCCOUT, MB86A16_DCCOUT_DISEN) < 0) + goto err; + break; + } + + return 0; +err: + dprintk(verbose, MB86A16_ERROR, 1, "I2C transfer error"); + return -EREMOTEIO; +} + +static int mb86a16_set_tone(struct dvb_frontend *fe, fe_sec_tone_mode_t tone) +{ + struct mb86a16_state *state = fe->demodulator_priv; + + switch (tone) { + case SEC_TONE_ON: + if (mb86a16_write(state, MB86A16_TONEOUT2, 0x00) < 0) + goto err; + if (mb86a16_write(state, MB86A16_DCC1, MB86A16_DCC1_DISTA | + MB86A16_DCC1_CTOE) < 0) + + goto err; + if (mb86a16_write(state, MB86A16_DCCOUT, MB86A16_DCCOUT_DISEN) < 0) + goto err; + break; + case SEC_TONE_OFF: + if (mb86a16_write(state, MB86A16_TONEOUT2, 0x04) < 0) + goto err; + if (mb86a16_write(state, MB86A16_DCC1, MB86A16_DCC1_DISTA) < 0) + goto err; + if (mb86a16_write(state, MB86A16_DCCOUT, 0x00) < 0) + goto err; + break; + default: + return -EINVAL; + } + return 0; + +err: + dprintk(verbose, MB86A16_ERROR, 1, "I2C transfer error"); + return -EREMOTEIO; +} + +static enum dvbfe_search mb86a16_search(struct dvb_frontend *fe, + struct dvb_frontend_parameters *p) +{ + struct mb86a16_state *state = fe->demodulator_priv; + + state->frequency = p->frequency / 1000; + state->srate = p->u.qpsk.symbol_rate / 1000; + + if (!mb86a16_set_fe(state)) { + dprintk(verbose, MB86A16_ERROR, 1, "Succesfully acquired LOCK"); + return DVBFE_ALGO_SEARCH_SUCCESS; + } + + dprintk(verbose, MB86A16_ERROR, 1, "Lock acquisition failed!"); + return DVBFE_ALGO_SEARCH_FAILED; +} + +static void mb86a16_release(struct dvb_frontend *fe) +{ + struct mb86a16_state *state = fe->demodulator_priv; + kfree(state); +} + +static int mb86a16_init(struct dvb_frontend *fe) +{ + return 0; +} + +static int mb86a16_sleep(struct dvb_frontend *fe) +{ + return 0; +} + +static int mb86a16_read_ber(struct dvb_frontend *fe, u32 *ber) +{ + u8 ber_mon, ber_tab, ber_lsb, ber_mid, ber_msb, ber_tim, ber_rst; + u32 timer; + + struct mb86a16_state *state = fe->demodulator_priv; + + *ber = 0; + if (mb86a16_read(state, MB86A16_BERMON, &ber_mon) != 2) + goto err; + if (mb86a16_read(state, MB86A16_BERTAB, &ber_tab) != 2) + goto err; + if (mb86a16_read(state, MB86A16_BERLSB, &ber_lsb) != 2) + goto err; + if (mb86a16_read(state, MB86A16_BERMID, &ber_mid) != 2) + goto err; + if (mb86a16_read(state, MB86A16_BERMSB, &ber_msb) != 2) + goto err; + /* BER monitor invalid when BER_EN = 0 */ + if (ber_mon & 0x04) { + /* coarse, fast calculation */ + *ber = ber_tab & 0x1f; + dprintk(verbose, MB86A16_DEBUG, 1, "BER coarse=[0x%02x]", *ber); + if (ber_mon & 0x01) { + /* + * BER_SEL = 1, The monitored BER is the estimated + * value with a Reed-Solomon decoder error amount at + * the deinterleaver output. + * monitored BER is expressed as a 20 bit output in total + */ + ber_rst = ber_mon >> 3; + *ber = (((ber_msb << 8) | ber_mid) << 8) | ber_lsb; + if (ber_rst == 0) + timer = 12500000; + if (ber_rst == 1) + timer = 25000000; + if (ber_rst == 2) + timer = 50000000; + if (ber_rst == 3) + timer = 100000000; + + *ber /= timer; + dprintk(verbose, MB86A16_DEBUG, 1, "BER fine=[0x%02x]", *ber); + } else { + /* + * BER_SEL = 0, The monitored BER is the estimated + * value with a Viterbi decoder error amount at the + * QPSK demodulator output. + * monitored BER is expressed as a 24 bit output in total + */ + ber_tim = ber_mon >> 1; + *ber = (((ber_msb << 8) | ber_mid) << 8) | ber_lsb; + if (ber_tim == 0) + timer = 16; + if (ber_tim == 1) + timer = 24; + + *ber /= 2 ^ timer; + dprintk(verbose, MB86A16_DEBUG, 1, "BER fine=[0x%02x]", *ber); + } + } + return 0; +err: + dprintk(verbose, MB86A16_ERROR, 1, "I2C transfer error"); + return -EREMOTEIO; +} + +static int mb86a16_read_signal_strength(struct dvb_frontend *fe, u16 *strength) +{ + u8 agcm = 0; + struct mb86a16_state *state = fe->demodulator_priv; + + *strength = 0; + if (mb86a16_read(state, MB86A16_AGCM, &agcm) != 2) { + dprintk(verbose, MB86A16_ERROR, 1, "I2C transfer error"); + return -EREMOTEIO; + } + + *strength = ((0xff - agcm) * 100) / 256; + dprintk(verbose, MB86A16_DEBUG, 1, "Signal strength=[%d %%]", (u8) *strength); + *strength = (0xffff - 0xff) + agcm; + + return 0; +} + +struct cnr { + u8 cn_reg; + u8 cn_val; +}; + +static const struct cnr cnr_tab[] = { + { 35, 2 }, + { 40, 3 }, + { 50, 4 }, + { 60, 5 }, + { 70, 6 }, + { 80, 7 }, + { 92, 8 }, + { 103, 9 }, + { 115, 10 }, + { 138, 12 }, + { 162, 15 }, + { 180, 18 }, + { 185, 19 }, + { 189, 20 }, + { 195, 22 }, + { 199, 24 }, + { 201, 25 }, + { 202, 26 }, + { 203, 27 }, + { 205, 28 }, + { 208, 30 } +}; + +static int mb86a16_read_snr(struct dvb_frontend *fe, u16 *snr) +{ + struct mb86a16_state *state = fe->demodulator_priv; + int i = 0; + int low_tide = 2, high_tide = 30, q_level; + u8 cn; + + *snr = 0; + if (mb86a16_read(state, 0x26, &cn) != 2) { + dprintk(verbose, MB86A16_ERROR, 1, "I2C transfer error"); + return -EREMOTEIO; + } + + for (i = 0; i < ARRAY_SIZE(cnr_tab); i++) { + if (cn < cnr_tab[i].cn_reg) { + *snr = cnr_tab[i].cn_val; + break; + } + } + q_level = (*snr * 100) / (high_tide - low_tide); + dprintk(verbose, MB86A16_ERROR, 1, "SNR (Quality) = [%d dB], Level=%d %%", *snr, q_level); + *snr = (0xffff - 0xff) + *snr; + + return 0; +} + +static int mb86a16_read_ucblocks(struct dvb_frontend *fe, u32 *ucblocks) +{ + u8 dist; + struct mb86a16_state *state = fe->demodulator_priv; + + if (mb86a16_read(state, MB86A16_DISTMON, &dist) != 2) { + dprintk(verbose, MB86A16_ERROR, 1, "I2C transfer error"); + return -EREMOTEIO; + } + *ucblocks = dist; + + return 0; +} + +static enum dvbfe_algo mb86a16_frontend_algo(struct dvb_frontend *fe) +{ + return DVBFE_ALGO_CUSTOM; +} + +static struct dvb_frontend_ops mb86a16_ops = { + .info = { + .name = "Fujitsu MB86A16 DVB-S", + .type = FE_QPSK, + .frequency_min = 950000, + .frequency_max = 2150000, + .frequency_stepsize = 3000, + .frequency_tolerance = 0, + .symbol_rate_min = 1000000, + .symbol_rate_max = 45000000, + .symbol_rate_tolerance = 500, + .caps = FE_CAN_FEC_1_2 | FE_CAN_FEC_2_3 | + FE_CAN_FEC_3_4 | FE_CAN_FEC_5_6 | + FE_CAN_FEC_7_8 | FE_CAN_QPSK | + FE_CAN_FEC_AUTO + }, + .release = mb86a16_release, + + .get_frontend_algo = mb86a16_frontend_algo, + .search = mb86a16_search, + .read_status = mb86a16_read_status, + .init = mb86a16_init, + .sleep = mb86a16_sleep, + .read_status = mb86a16_read_status, + + .read_ber = mb86a16_read_ber, + .read_signal_strength = mb86a16_read_signal_strength, + .read_snr = mb86a16_read_snr, + .read_ucblocks = mb86a16_read_ucblocks, + + .diseqc_send_master_cmd = mb86a16_send_diseqc_msg, + .diseqc_send_burst = mb86a16_send_diseqc_burst, + .set_tone = mb86a16_set_tone, +}; + +struct dvb_frontend *mb86a16_attach(const struct mb86a16_config *config, + struct i2c_adapter *i2c_adap) +{ + u8 dev_id = 0; + struct mb86a16_state *state = NULL; + + state = kmalloc(sizeof(struct mb86a16_state), GFP_KERNEL); + if (state == NULL) + goto error; + + state->config = config; + state->i2c_adap = i2c_adap; + + mb86a16_read(state, 0x7f, &dev_id); + if (dev_id != 0xfe) + goto error; + + memcpy(&state->frontend.ops, &mb86a16_ops, sizeof(struct dvb_frontend_ops)); + state->frontend.demodulator_priv = state; + state->frontend.ops.set_voltage = state->config->set_voltage; + + return &state->frontend; +error: + kfree(state); + return NULL; +} +EXPORT_SYMBOL(mb86a16_attach); +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Manu Abraham"); diff --git a/drivers/media/dvb/frontends/mb86a16.h b/drivers/media/dvb/frontends/mb86a16.h new file mode 100644 index 00000000000..6ea8c376394 --- /dev/null +++ b/drivers/media/dvb/frontends/mb86a16.h @@ -0,0 +1,52 @@ +/* + Fujitsu MB86A16 DVB-S/DSS DC Receiver driver + + Copyright (C) Manu Abraham (abraham.manu@gmail.com) + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +*/ + +#ifndef __MB86A16_H +#define __MB86A16_H + +#include <linux/dvb/frontend.h> +#include "dvb_frontend.h" + + +struct mb86a16_config { + u8 demod_address; + + int (*set_voltage)(struct dvb_frontend *fe, fe_sec_voltage_t voltage); +}; + + + +#if defined(CONFIG_DVB_MB86A16) || (defined(CONFIG_DVB_MB86A16_MODULE) && defined(MODULE)) + +extern struct dvb_frontend *mb86a16_attach(const struct mb86a16_config *config, + struct i2c_adapter *i2c_adap); + +#else + +static inline struct dvb_frontend *mb86a16_attach(const struct mb86a16_config *config, + struct i2c_adapter *i2c_adap) +{ + printk(KERN_WARNING "%s: Driver disabled by Kconfig\n", __func__); + return NULL; +} + +#endif /* CONFIG_DVB_MB86A16 */ + +#endif /* __MB86A16_H */ diff --git a/drivers/media/dvb/frontends/mb86a16_priv.h b/drivers/media/dvb/frontends/mb86a16_priv.h new file mode 100644 index 00000000000..360a35acfe8 --- /dev/null +++ b/drivers/media/dvb/frontends/mb86a16_priv.h @@ -0,0 +1,151 @@ +/* + Fujitsu MB86A16 DVB-S/DSS DC Receiver driver + + Copyright (C) Manu Abraham (abraham.manu@gmail.com) + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +*/ + +#ifndef __MB86A16_PRIV_H +#define __MB86A16_PRIV_H + +#define MB86A16_TSOUT 0x00 +#define MB86A16_TSOUT_HIZSEL (0x01 << 5) +#define MB86A16_TSOUT_HIZCNTI (0x01 << 4) +#define MB86A16_TSOUT_MODE (0x01 << 3) +#define MB86A16_TSOUT_ORDER (0x01 << 2) +#define MB86A16_TSOUT_ERROR (0x01 << 1) +#define Mb86A16_TSOUT_EDGE (0x01 << 0) + +#define MB86A16_FEC 0x01 +#define MB86A16_FEC_FSYNC (0x01 << 5) +#define MB86A16_FEC_PCKB8 (0x01 << 4) +#define MB86A16_FEC_DVDS (0x01 << 3) +#define MB86A16_FEC_EREN (0x01 << 2) +#define Mb86A16_FEC_RSEN (0x01 << 1) +#define MB86A16_FEC_DIEN (0x01 << 0) + +#define MB86A16_AGC 0x02 +#define MB86A16_AGC_AGMD (0x01 << 6) +#define MB86A16_AGC_AGCW (0x0f << 2) +#define MB86A16_AGC_AGCP (0x01 << 1) +#define MB86A16_AGC_AGCR (0x01 << 0) + +#define MB86A16_SRATE1 0x03 +#define MB86A16_SRATE1_DECI (0x07 << 2) +#define MB86A16_SRATE1_CSEL (0x01 << 1) +#define MB86A16_SRATE1_RSEL (0x01 << 0) + +#define MB86A16_SRATE2 0x04 +#define MB86A16_SRATE2_STOFSL (0xff << 0) + +#define MB86A16_SRATE3 0x05 +#define MB86A16_SRATE2_STOFSH (0xff << 0) + +#define MB86A16_VITERBI 0x06 +#define MB86A16_FRAMESYNC 0x07 +#define MB86A16_CRLFILTCOEF1 0x08 +#define MB86A16_CRLFILTCOEF2 0x09 +#define MB86A16_STRFILTCOEF1 0x0a +#define MB86A16_STRFILTCOEF2 0x0b +#define MB86A16_RESET 0x0c +#define MB86A16_STATUS 0x0d +#define MB86A16_AFCML 0x0e +#define MB86A16_AFCMH 0x0f +#define MB86A16_BERMON 0x10 +#define MB86A16_BERTAB 0x11 +#define MB86A16_BERLSB 0x12 +#define MB86A16_BERMID 0x13 +#define MB86A16_BERMSB 0x14 +#define MB86A16_AGCM 0x15 + +#define MB86A16_DCC1 0x16 +#define MB86A16_DCC1_DISTA (0x01 << 7) +#define MB86A16_DCC1_PRTY (0x01 << 6) +#define MB86A16_DCC1_CTOE (0x01 << 5) +#define MB86A16_DCC1_TBEN (0x01 << 4) +#define MB86A16_DCC1_TBO (0x01 << 3) +#define MB86A16_DCC1_NUM (0x07 << 0) + +#define MB86A16_DCC2 0x17 +#define MB86A16_DCC2_DCBST (0x01 << 0) + +#define MB86A16_DCC3 0x18 +#define MB86A16_DCC3_CODE0 (0xff << 0) + +#define MB86A16_DCC4 0x19 +#define MB86A16_DCC4_CODE1 (0xff << 0) + +#define MB86A16_DCC5 0x1a +#define MB86A16_DCC5_CODE2 (0xff << 0) + +#define MB86A16_DCC6 0x1b +#define MB86A16_DCC6_CODE3 (0xff << 0) + +#define MB86A16_DCC7 0x1c +#define MB86A16_DCC7_CODE4 (0xff << 0) + +#define MB86A16_DCC8 0x1d +#define MB86A16_DCC8_CODE5 (0xff << 0) + +#define MB86A16_DCCOUT 0x1e +#define MB86A16_DCCOUT_DISEN (0x01 << 0) + +#define MB86A16_TONEOUT1 0x1f +#define MB86A16_TONE_TDIVL (0xff << 0) + +#define MB86A16_TONEOUT2 0x20 +#define MB86A16_TONE_TMD (0x03 << 2) +#define MB86A16_TONE_TDIVH (0x03 << 0) + +#define MB86A16_FREQ1 0x21 +#define MB86A16_FREQ2 0x22 +#define MB86A16_FREQ3 0x23 +#define MB86A16_FREQ4 0x24 +#define MB86A16_FREQSET 0x25 +#define MB86A16_CNM 0x26 +#define MB86A16_PORT0 0x27 +#define MB86A16_PORT1 0x28 +#define MB86A16_DRCFILT 0x29 +#define MB86A16_AFC 0x2a +#define MB86A16_AFCEXL 0x2b +#define MB86A16_AFCEXH 0x2c +#define MB86A16_DAGC 0x2d +#define MB86A16_SEQMODE 0x32 +#define MB86A16_S0S1T 0x33 +#define MB86A16_S2S3T 0x34 +#define MB86A16_S4S5T 0x35 +#define MB86A16_CNTMR 0x36 +#define MB86A16_SIG1 0x37 +#define MB86A16_SIG2 0x38 +#define MB86A16_VIMAG 0x39 +#define MB86A16_VISET1 0x3a +#define MB86A16_VISET2 0x3b +#define MB86A16_VISET3 0x3c +#define MB86A16_FAGCS1 0x3d +#define MB86A16_FAGCS2 0x3e +#define MB86A16_FAGCS3 0x3f +#define MB86A16_FAGCS4 0x40 +#define MB86A16_FAGCS5 0x41 +#define MB86A16_FAGCS6 0x42 +#define MB86A16_CRM 0x43 +#define MB86A16_STRM 0x44 +#define MB86A16_DAGCML 0x45 +#define MB86A16_DAGCMH 0x46 +#define MB86A16_QPSKTST 0x49 +#define MB86A16_DISTMON 0x52 +#define MB86A16_VERSION 0x7f + +#endif /* __MB86A16_PRIV_H */ diff --git a/drivers/media/dvb/frontends/tda10021.c b/drivers/media/dvb/frontends/tda10021.c index 6c1dbf9288d..6ca533ea0f0 100644 --- a/drivers/media/dvb/frontends/tda10021.c +++ b/drivers/media/dvb/frontends/tda10021.c @@ -426,6 +426,10 @@ struct dvb_frontend* tda10021_attach(const struct tda1002x_config* config, id = tda10021_readreg(state, 0x1a); if ((id & 0xf0) != 0x70) goto error; + /* Don't claim TDA10023 */ + if (id == 0x7d) + goto error; + printk("TDA10021: i2c-addr = 0x%02x, id = 0x%02x\n", state->config->demod_address, id); diff --git a/drivers/media/dvb/frontends/tda665x.c b/drivers/media/dvb/frontends/tda665x.c new file mode 100644 index 00000000000..87d52739c82 --- /dev/null +++ b/drivers/media/dvb/frontends/tda665x.c @@ -0,0 +1,257 @@ +/* + TDA665x tuner driver + Copyright (C) Manu Abraham (abraham.manu@gmail.com) + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +*/ + +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/module.h> + +#include "dvb_frontend.h" +#include "tda665x.h" + +struct tda665x_state { + struct dvb_frontend *fe; + struct i2c_adapter *i2c; + const struct tda665x_config *config; + + u32 frequency; + u32 bandwidth; +}; + +static int tda665x_read(struct tda665x_state *state, u8 *buf) +{ + const struct tda665x_config *config = state->config; + int err = 0; + struct i2c_msg msg = { .addr = config->addr, .flags = I2C_M_RD, .buf = buf, .len = 2 }; + + err = i2c_transfer(state->i2c, &msg, 1); + if (err != 1) + goto exit; + + return err; +exit: + printk(KERN_ERR "%s: I/O Error err=<%d>\n", __func__, err); + return err; +} + +static int tda665x_write(struct tda665x_state *state, u8 *buf, u8 length) +{ + const struct tda665x_config *config = state->config; + int err = 0; + struct i2c_msg msg = { .addr = config->addr, .flags = 0, .buf = buf, .len = length }; + + err = i2c_transfer(state->i2c, &msg, 1); + if (err != 1) + goto exit; + + return err; +exit: + printk(KERN_ERR "%s: I/O Error err=<%d>\n", __func__, err); + return err; +} + +static int tda665x_get_state(struct dvb_frontend *fe, + enum tuner_param param, + struct tuner_state *tstate) +{ + struct tda665x_state *state = fe->tuner_priv; + int err = 0; + + switch (param) { + case DVBFE_TUNER_FREQUENCY: + tstate->frequency = state->frequency; + break; + case DVBFE_TUNER_BANDWIDTH: + break; + default: + printk(KERN_ERR "%s: Unknown parameter (param=%d)\n", __func__, param); + err = -EINVAL; + break; + } + + return err; +} + +static int tda665x_get_status(struct dvb_frontend *fe, u32 *status) +{ + struct tda665x_state *state = fe->tuner_priv; + u8 result = 0; + int err = 0; + + *status = 0; + + err = tda665x_read(state, &result); + if (err < 0) + goto exit; + + if ((result >> 6) & 0x01) { + printk(KERN_DEBUG "%s: Tuner Phase Locked\n", __func__); + *status = 1; + } + + return err; +exit: + printk(KERN_ERR "%s: I/O Error\n", __func__); + return err; +} + +static int tda665x_set_state(struct dvb_frontend *fe, + enum tuner_param param, + struct tuner_state *tstate) +{ + struct tda665x_state *state = fe->tuner_priv; + const struct tda665x_config *config = state->config; + u32 frequency, status = 0; + u8 buf[4]; + int err = 0; + + if (param & DVBFE_TUNER_FREQUENCY) { + + frequency = tstate->frequency; + if ((frequency < config->frequency_max) || (frequency > config->frequency_min)) { + printk(KERN_ERR "%s: Frequency beyond limits, frequency=%d\n", __func__, frequency); + return -EINVAL; + } + + frequency += config->frequency_offst; + frequency *= config->ref_multiplier; + frequency += config->ref_divider >> 1; + frequency /= config->ref_divider; + + buf[0] = (u8) (frequency & 0x7f00) >> 8; + buf[1] = (u8) (frequency & 0x00ff) >> 0; + buf[2] = 0x80 | 0x40 | 0x02; + buf[3] = 0x00; + + /* restore frequency */ + frequency = tstate->frequency; + + if (frequency < 153000000) { + /* VHF-L */ + buf[3] |= 0x01; /* fc, Low Band, 47 - 153 MHz */ + if (frequency < 68000000) + buf[3] |= 0x40; /* 83uA */ + if (frequency < 1040000000) + buf[3] |= 0x60; /* 122uA */ + if (frequency < 1250000000) + buf[3] |= 0x80; /* 163uA */ + else + buf[3] |= 0xa0; /* 254uA */ + } else if (frequency < 438000000) { + /* VHF-H */ + buf[3] |= 0x02; /* fc, Mid Band, 153 - 438 MHz */ + if (frequency < 230000000) + buf[3] |= 0x40; + if (frequency < 300000000) + buf[3] |= 0x60; + else + buf[3] |= 0x80; + } else { + /* UHF */ + buf[3] |= 0x04; /* fc, High Band, 438 - 862 MHz */ + if (frequency < 470000000) + buf[3] |= 0x60; + if (frequency < 526000000) + buf[3] |= 0x80; + else + buf[3] |= 0xa0; + } + + /* Set params */ + err = tda665x_write(state, buf, 5); + if (err < 0) + goto exit; + + /* sleep for some time */ + printk(KERN_DEBUG "%s: Waiting to Phase LOCK\n", __func__); + msleep(20); + /* check status */ + err = tda665x_get_status(fe, &status); + if (err < 0) + goto exit; + + if (status == 1) { + printk(KERN_DEBUG "%s: Tuner Phase locked: status=%d\n", __func__, status); + state->frequency = frequency; /* cache successful state */ + } else { + printk(KERN_ERR "%s: No Phase lock: status=%d\n", __func__, status); + } + } else { + printk(KERN_ERR "%s: Unknown parameter (param=%d)\n", __func__, param); + return -EINVAL; + } + + return 0; +exit: + printk(KERN_ERR "%s: I/O Error\n", __func__); + return err; +} + +static int tda665x_release(struct dvb_frontend *fe) +{ + struct tda665x_state *state = fe->tuner_priv; + + fe->tuner_priv = NULL; + kfree(state); + return 0; +} + +static struct dvb_tuner_ops tda665x_ops = { + + .set_state = tda665x_set_state, + .get_state = tda665x_get_state, + .get_status = tda665x_get_status, + .release = tda665x_release +}; + +struct dvb_frontend *tda665x_attach(struct dvb_frontend *fe, + const struct tda665x_config *config, + struct i2c_adapter *i2c) +{ + struct tda665x_state *state = NULL; + struct dvb_tuner_info *info; + + state = kzalloc(sizeof(struct tda665x_state), GFP_KERNEL); + if (state == NULL) + goto exit; + + state->config = config; + state->i2c = i2c; + state->fe = fe; + fe->tuner_priv = state; + fe->ops.tuner_ops = tda665x_ops; + info = &fe->ops.tuner_ops.info; + + memcpy(info->name, config->name, sizeof(config->name)); + info->frequency_min = config->frequency_min; + info->frequency_max = config->frequency_max; + info->frequency_step = config->frequency_offst; + + printk(KERN_DEBUG "%s: Attaching TDA665x (%s) tuner\n", __func__, info->name); + + return fe; + +exit: + kfree(state); + return NULL; +} +EXPORT_SYMBOL(tda665x_attach); + +MODULE_DESCRIPTION("TDA665x driver"); +MODULE_AUTHOR("Manu Abraham"); +MODULE_LICENSE("GPL"); diff --git a/drivers/media/dvb/frontends/tda665x.h b/drivers/media/dvb/frontends/tda665x.h new file mode 100644 index 00000000000..ec7927aa75a --- /dev/null +++ b/drivers/media/dvb/frontends/tda665x.h @@ -0,0 +1,52 @@ +/* + TDA665x tuner driver + Copyright (C) Manu Abraham (abraham.manu@gmail.com) + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +*/ + +#ifndef __TDA665x_H +#define __TDA665x_H + +struct tda665x_config { + char name[128]; + + u8 addr; + u32 frequency_min; + u32 frequency_max; + u32 frequency_offst; + u32 ref_multiplier; + u32 ref_divider; +}; + +#if defined(CONFIG_DVB_TDA665x) || (defined(CONFIG_DVB_TDA665x_MODULE) && defined(MODULE)) + +extern struct dvb_frontend *tda665x_attach(struct dvb_frontend *fe, + const struct tda665x_config *config, + struct i2c_adapter *i2c); + +#else + +static inline struct dvb_frontend *tda665x_attach(struct dvb_frontend *fe, + const struct tda665x_config *config, + struct i2c_adapter *i2c) +{ + printk(KERN_WARNING "%s: Driver disabled by Kconfig\n", __func__); + return NULL; +} + +#endif /* CONFIG_DVB_TDA665x */ + +#endif /* __TDA665x_H */ diff --git a/drivers/media/dvb/mantis/Kconfig b/drivers/media/dvb/mantis/Kconfig new file mode 100644 index 00000000000..f7b72a32adf --- /dev/null +++ b/drivers/media/dvb/mantis/Kconfig @@ -0,0 +1,32 @@ +config MANTIS_CORE + tristate "Mantis/Hopper PCI bridge based devices" + depends on PCI && I2C && INPUT + + help + Support for PCI cards based on the Mantis and Hopper PCi bridge. + + Say Y if you own such a device and want to use it. + +config DVB_MANTIS + tristate "MANTIS based cards" + depends on MANTIS_CORE && DVB_CORE && PCI && I2C + select DVB_MB86A16 + select DVB_ZL10353 + select DVB_STV0299 + select DVB_PLL + help + Support for PCI cards based on the Mantis PCI bridge. + Say Y when you have a Mantis based DVB card and want to use it. + + If unsure say N. + +config DVB_HOPPER + tristate "HOPPER based cards" + depends on MANTIS_CORE && DVB_CORE && PCI && I2C + select DVB_ZL10353 + select DVB_PLL + help + Support for PCI cards based on the Hopper PCI bridge. + Say Y when you have a Hopper based DVB card and want to use it. + + If unsure say N diff --git a/drivers/media/dvb/mantis/Makefile b/drivers/media/dvb/mantis/Makefile new file mode 100644 index 00000000000..98dc5cd258a --- /dev/null +++ b/drivers/media/dvb/mantis/Makefile @@ -0,0 +1,28 @@ +mantis_core-objs := mantis_ioc.o \ + mantis_uart.o \ + mantis_dma.o \ + mantis_pci.o \ + mantis_i2c.o \ + mantis_dvb.o \ + mantis_evm.o \ + mantis_hif.o \ + mantis_ca.o \ + mantis_pcmcia.o \ + mantis_input.o + +mantis-objs := mantis_cards.o \ + mantis_vp1033.o \ + mantis_vp1034.o \ + mantis_vp1041.o \ + mantis_vp2033.o \ + mantis_vp2040.o \ + mantis_vp3030.o + +hopper-objs := hopper_cards.o \ + hopper_vp3028.o + +obj-$(CONFIG_MANTIS_CORE) += mantis_core.o +obj-$(CONFIG_DVB_MANTIS) += mantis.o +obj-$(CONFIG_DVB_HOPPER) += hopper.o + +EXTRA_CFLAGS = -Idrivers/media/dvb/dvb-core/ -Idrivers/media/dvb/frontends/ diff --git a/drivers/media/dvb/mantis/hopper_cards.c b/drivers/media/dvb/mantis/hopper_cards.c new file mode 100644 index 00000000000..d073c61e3c0 --- /dev/null +++ b/drivers/media/dvb/mantis/hopper_cards.c @@ -0,0 +1,275 @@ +/* + Hopper PCI bridge driver + + Copyright (C) Manu Abraham (abraham.manu@gmail.com) + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +*/ + +#include <linux/module.h> +#include <linux/moduleparam.h> +#include <linux/kernel.h> +#include <linux/pci.h> +#include <asm/irq.h> +#include <linux/interrupt.h> + +#include "dmxdev.h" +#include "dvbdev.h" +#include "dvb_demux.h" +#include "dvb_frontend.h" +#include "dvb_net.h" + +#include "mantis_common.h" +#include "hopper_vp3028.h" +#include "mantis_dma.h" +#include "mantis_dvb.h" +#include "mantis_uart.h" +#include "mantis_ioc.h" +#include "mantis_pci.h" +#include "mantis_i2c.h" +#include "mantis_reg.h" + +static unsigned int verbose; +module_param(verbose, int, 0644); +MODULE_PARM_DESC(verbose, "verbose startup messages, default is 1 (yes)"); + +#define DRIVER_NAME "Hopper" + +static char *label[10] = { + "DMA", + "IRQ-0", + "IRQ-1", + "OCERR", + "PABRT", + "RIPRR", + "PPERR", + "FTRGT", + "RISCI", + "RACK" +}; + +static int devs; + +static irqreturn_t hopper_irq_handler(int irq, void *dev_id) +{ + u32 stat = 0, mask = 0, lstat = 0, mstat = 0; + u32 rst_stat = 0, rst_mask = 0; + + struct mantis_pci *mantis; + struct mantis_ca *ca; + + mantis = (struct mantis_pci *) dev_id; + if (unlikely(mantis == NULL)) { + dprintk(MANTIS_ERROR, 1, "Mantis == NULL"); + return IRQ_NONE; + } + ca = mantis->mantis_ca; + + stat = mmread(MANTIS_INT_STAT); + mask = mmread(MANTIS_INT_MASK); + mstat = lstat = stat & ~MANTIS_INT_RISCSTAT; + if (!(stat & mask)) + return IRQ_NONE; + + rst_mask = MANTIS_GPIF_WRACK | + MANTIS_GPIF_OTHERR | + MANTIS_SBUF_WSTO | + MANTIS_GPIF_EXTIRQ; + + rst_stat = mmread(MANTIS_GPIF_STATUS); + rst_stat &= rst_mask; + mmwrite(rst_stat, MANTIS_GPIF_STATUS); + + mantis->mantis_int_stat = stat; + mantis->mantis_int_mask = mask; + dprintk(MANTIS_DEBUG, 0, "\n-- Stat=<%02x> Mask=<%02x> --", stat, mask); + if (stat & MANTIS_INT_RISCEN) { + dprintk(MANTIS_DEBUG, 0, "<%s>", label[0]); + } + if (stat & MANTIS_INT_IRQ0) { + dprintk(MANTIS_DEBUG, 0, "<%s>", label[1]); + mantis->gpif_status = rst_stat; + wake_up(&ca->hif_write_wq); + schedule_work(&ca->hif_evm_work); + } + if (stat & MANTIS_INT_IRQ1) { + dprintk(MANTIS_DEBUG, 0, "<%s>", label[2]); + schedule_work(&mantis->uart_work); + } + if (stat & MANTIS_INT_OCERR) { + dprintk(MANTIS_DEBUG, 0, "<%s>", label[3]); + } + if (stat & MANTIS_INT_PABORT) { + dprintk(MANTIS_DEBUG, 0, "<%s>", label[4]); + } + if (stat & MANTIS_INT_RIPERR) { + dprintk(MANTIS_DEBUG, 0, "<%s>", label[5]); + } + if (stat & MANTIS_INT_PPERR) { + dprintk(MANTIS_DEBUG, 0, "<%s>", label[6]); + } + if (stat & MANTIS_INT_FTRGT) { + dprintk(MANTIS_DEBUG, 0, "<%s>", label[7]); + } + if (stat & MANTIS_INT_RISCI) { + dprintk(MANTIS_DEBUG, 0, "<%s>", label[8]); + mantis->finished_block = (stat & MANTIS_INT_RISCSTAT) >> 28; + tasklet_schedule(&mantis->tasklet); + } + if (stat & MANTIS_INT_I2CDONE) { + dprintk(MANTIS_DEBUG, 0, "<%s>", label[9]); + wake_up(&mantis->i2c_wq); + } + mmwrite(stat, MANTIS_INT_STAT); + stat &= ~(MANTIS_INT_RISCEN | MANTIS_INT_I2CDONE | + MANTIS_INT_I2CRACK | MANTIS_INT_PCMCIA7 | + MANTIS_INT_PCMCIA6 | MANTIS_INT_PCMCIA5 | + MANTIS_INT_PCMCIA4 | MANTIS_INT_PCMCIA3 | + MANTIS_INT_PCMCIA2 | MANTIS_INT_PCMCIA1 | + MANTIS_INT_PCMCIA0 | MANTIS_INT_IRQ1 | + MANTIS_INT_IRQ0 | MANTIS_INT_OCERR | + MANTIS_INT_PABORT | MANTIS_INT_RIPERR | + MANTIS_INT_PPERR | MANTIS_INT_FTRGT | + MANTIS_INT_RISCI); + + if (stat) + dprintk(MANTIS_DEBUG, 0, "<Unknown> Stat=<%02x> Mask=<%02x>", stat, mask); + + dprintk(MANTIS_DEBUG, 0, "\n"); + return IRQ_HANDLED; +} + +static int __devinit hopper_pci_probe(struct pci_dev *pdev, const struct pci_device_id *pci_id) +{ + struct mantis_pci *mantis; + struct mantis_hwconfig *config; + int err = 0; + + mantis = kzalloc(sizeof(struct mantis_pci), GFP_KERNEL); + if (mantis == NULL) { + printk(KERN_ERR "%s ERROR: Out of memory\n", __func__); + err = -ENOMEM; + goto fail0; + } + + mantis->num = devs; + mantis->verbose = verbose; + mantis->pdev = pdev; + config = (struct mantis_hwconfig *) pci_id->driver_data; + config->irq_handler = &hopper_irq_handler; + mantis->hwconfig = config; + + err = mantis_pci_init(mantis); + if (err) { + dprintk(MANTIS_ERROR, 1, "ERROR: Mantis PCI initialization failed <%d>", err); + goto fail1; + } + + err = mantis_stream_control(mantis, STREAM_TO_HIF); + if (err < 0) { + dprintk(MANTIS_ERROR, 1, "ERROR: Mantis stream control failed <%d>", err); + goto fail1; + } + + err = mantis_i2c_init(mantis); + if (err < 0) { + dprintk(MANTIS_ERROR, 1, "ERROR: Mantis I2C initialization failed <%d>", err); + goto fail2; + } + + err = mantis_get_mac(mantis); + if (err < 0) { + dprintk(MANTIS_ERROR, 1, "ERROR: Mantis MAC address read failed <%d>", err); + goto fail2; + } + + err = mantis_dma_init(mantis); + if (err < 0) { + dprintk(MANTIS_ERROR, 1, "ERROR: Mantis DMA initialization failed <%d>", err); + goto fail3; + } + + err = mantis_dvb_init(mantis); + if (err < 0) { + dprintk(MANTIS_ERROR, 1, "ERROR: Mantis DVB initialization failed <%d>", err); + goto fail4; + } + devs++; + + return err; + +fail4: + dprintk(MANTIS_ERROR, 1, "ERROR: Mantis DMA exit! <%d>", err); + mantis_dma_exit(mantis); + +fail3: + dprintk(MANTIS_ERROR, 1, "ERROR: Mantis I2C exit! <%d>", err); + mantis_i2c_exit(mantis); + +fail2: + dprintk(MANTIS_ERROR, 1, "ERROR: Mantis PCI exit! <%d>", err); + mantis_pci_exit(mantis); + +fail1: + dprintk(MANTIS_ERROR, 1, "ERROR: Mantis free! <%d>", err); + kfree(mantis); + +fail0: + return err; +} + +static void __devexit hopper_pci_remove(struct pci_dev *pdev) +{ + struct mantis_pci *mantis = pci_get_drvdata(pdev); + + if (mantis) { + mantis_dvb_exit(mantis); + mantis_dma_exit(mantis); + mantis_i2c_exit(mantis); + mantis_pci_exit(mantis); + kfree(mantis); + } + return; + +} + +static struct pci_device_id hopper_pci_table[] = { + MAKE_ENTRY(TWINHAN_TECHNOLOGIES, MANTIS_VP_3028_DVB_T, &vp3028_config), + { } +}; + +static struct pci_driver hopper_pci_driver = { + .name = DRIVER_NAME, + .id_table = hopper_pci_table, + .probe = hopper_pci_probe, + .remove = hopper_pci_remove, +}; + +static int __devinit hopper_init(void) +{ + return pci_register_driver(&hopper_pci_driver); +} + +static void __devexit hopper_exit(void) +{ + return pci_unregister_driver(&hopper_pci_driver); +} + +module_init(hopper_init); +module_exit(hopper_exit); + +MODULE_DESCRIPTION("HOPPER driver"); +MODULE_AUTHOR("Manu Abraham"); +MODULE_LICENSE("GPL"); diff --git a/drivers/media/dvb/mantis/hopper_vp3028.c b/drivers/media/dvb/mantis/hopper_vp3028.c new file mode 100644 index 00000000000..96674c78e86 --- /dev/null +++ b/drivers/media/dvb/mantis/hopper_vp3028.c @@ -0,0 +1,88 @@ +/* + Hopper VP-3028 driver + + Copyright (C) Manu Abraham (abraham.manu@gmail.com) + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +*/ + +#include <linux/signal.h> +#include <linux/sched.h> +#include <linux/interrupt.h> + +#include "dmxdev.h" +#include "dvbdev.h" +#include "dvb_demux.h" +#include "dvb_frontend.h" +#include "dvb_net.h" + +#include "zl10353.h" +#include "mantis_common.h" +#include "mantis_ioc.h" +#include "mantis_dvb.h" +#include "hopper_vp3028.h" + +struct zl10353_config hopper_vp3028_config = { + .demod_address = 0x0f, +}; + +#define MANTIS_MODEL_NAME "VP-3028" +#define MANTIS_DEV_TYPE "DVB-T" + +static int vp3028_frontend_init(struct mantis_pci *mantis, struct dvb_frontend *fe) +{ + struct i2c_adapter *adapter = &mantis->adapter; + struct mantis_hwconfig *config = mantis->hwconfig; + int err = 0; + + gpio_set_bits(mantis, config->reset, 0); + msleep(100); + err = mantis_frontend_power(mantis, POWER_ON); + msleep(100); + gpio_set_bits(mantis, config->reset, 1); + + err = mantis_frontend_power(mantis, POWER_ON); + if (err == 0) { + msleep(250); + dprintk(MANTIS_ERROR, 1, "Probing for 10353 (DVB-T)"); + fe = zl10353_attach(&hopper_vp3028_config, adapter); + + if (!fe) + return -1; + } else { + dprintk(MANTIS_ERROR, 1, "Frontend on <%s> POWER ON failed! <%d>", + adapter->name, + err); + + return -EIO; + } + dprintk(MANTIS_ERROR, 1, "Done!"); + + return 0; +} + +struct mantis_hwconfig vp3028_config = { + .model_name = MANTIS_MODEL_NAME, + .dev_type = MANTIS_DEV_TYPE, + .ts_size = MANTIS_TS_188, + + .baud_rate = MANTIS_BAUD_9600, + .parity = MANTIS_PARITY_NONE, + .bytes = 0, + + .frontend_init = vp3028_frontend_init, + .power = GPIF_A00, + .reset = GPIF_A03, +}; diff --git a/drivers/media/dvb/mantis/hopper_vp3028.h b/drivers/media/dvb/mantis/hopper_vp3028.h new file mode 100644 index 00000000000..57239498bc8 --- /dev/null +++ b/drivers/media/dvb/mantis/hopper_vp3028.h @@ -0,0 +1,30 @@ +/* + Hopper VP-3028 driver + + Copyright (C) Manu Abraham (abraham.manu@gmail.com) + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +*/ + +#ifndef __MANTIS_VP3028_H +#define __MANTIS_VP3028_H + +#include "mantis_common.h" + +#define MANTIS_VP_3028_DVB_T 0x0028 + +extern struct mantis_hwconfig vp3028_config; + +#endif /* __MANTIS_VP3028_H */ diff --git a/drivers/media/dvb/mantis/mantis_ca.c b/drivers/media/dvb/mantis/mantis_ca.c new file mode 100644 index 00000000000..403ce043d00 --- /dev/null +++ b/drivers/media/dvb/mantis/mantis_ca.c @@ -0,0 +1,207 @@ +/* + Mantis PCI bridge driver + + Copyright (C) Manu Abraham (abraham.manu@gmail.com) + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +*/ + +#include <linux/signal.h> +#include <linux/sched.h> +#include <linux/interrupt.h> + +#include "dmxdev.h" +#include "dvbdev.h" +#include "dvb_demux.h" +#include "dvb_frontend.h" +#include "dvb_net.h" + +#include "mantis_common.h" +#include "mantis_link.h" +#include "mantis_hif.h" +#include "mantis_reg.h" + +#include "mantis_ca.h" + +static int mantis_ca_read_attr_mem(struct dvb_ca_en50221 *en50221, int slot, int addr) +{ + struct mantis_ca *ca = en50221->data; + struct mantis_pci *mantis = ca->ca_priv; + + dprintk(MANTIS_DEBUG, 1, "Slot(%d): Request Attribute Mem Read", slot); + + if (slot != 0) + return -EINVAL; + + return mantis_hif_read_mem(ca, addr); +} + +static int mantis_ca_write_attr_mem(struct dvb_ca_en50221 *en50221, int slot, int addr, u8 data) +{ + struct mantis_ca *ca = en50221->data; + struct mantis_pci *mantis = ca->ca_priv; + + dprintk(MANTIS_DEBUG, 1, "Slot(%d): Request Attribute Mem Write", slot); + + if (slot != 0) + return -EINVAL; + + return mantis_hif_write_mem(ca, addr, data); +} + +static int mantis_ca_read_cam_ctl(struct dvb_ca_en50221 *en50221, int slot, u8 addr) +{ + struct mantis_ca *ca = en50221->data; + struct mantis_pci *mantis = ca->ca_priv; + + dprintk(MANTIS_DEBUG, 1, "Slot(%d): Request CAM control Read", slot); + + if (slot != 0) + return -EINVAL; + + return mantis_hif_read_iom(ca, addr); +} + +static int mantis_ca_write_cam_ctl(struct dvb_ca_en50221 *en50221, int slot, u8 addr, u8 data) +{ + struct mantis_ca *ca = en50221->data; + struct mantis_pci *mantis = ca->ca_priv; + + dprintk(MANTIS_DEBUG, 1, "Slot(%d): Request CAM control Write", slot); + + if (slot != 0) + return -EINVAL; + + return mantis_hif_write_iom(ca, addr, data); +} + +static int mantis_ca_slot_reset(struct dvb_ca_en50221 *en50221, int slot) +{ + struct mantis_ca *ca = en50221->data; + struct mantis_pci *mantis = ca->ca_priv; + + dprintk(MANTIS_DEBUG, 1, "Slot(%d): Slot RESET", slot); + udelay(500); /* Wait.. */ + mmwrite(0xda, MANTIS_PCMCIA_RESET); /* Leading edge assert */ + udelay(500); + mmwrite(0x00, MANTIS_PCMCIA_RESET); /* Trailing edge deassert */ + msleep(1000); + dvb_ca_en50221_camready_irq(&ca->en50221, 0); + + return 0; +} + +static int mantis_ca_slot_shutdown(struct dvb_ca_en50221 *en50221, int slot) +{ + struct mantis_ca *ca = en50221->data; + struct mantis_pci *mantis = ca->ca_priv; + + dprintk(MANTIS_DEBUG, 1, "Slot(%d): Slot shutdown", slot); + + return 0; +} + +static int mantis_ts_control(struct dvb_ca_en50221 *en50221, int slot) +{ + struct mantis_ca *ca = en50221->data; + struct mantis_pci *mantis = ca->ca_priv; + + dprintk(MANTIS_DEBUG, 1, "Slot(%d): TS control", slot); +/* mantis_set_direction(mantis, 1); */ /* Enable TS through CAM */ + + return 0; +} + +static int mantis_slot_status(struct dvb_ca_en50221 *en50221, int slot, int open) +{ + struct mantis_ca *ca = en50221->data; + struct mantis_pci *mantis = ca->ca_priv; + + dprintk(MANTIS_DEBUG, 1, "Slot(%d): Poll Slot status", slot); + + if (ca->slot_state == MODULE_INSERTED) { + dprintk(MANTIS_DEBUG, 1, "CA Module present and ready"); + return DVB_CA_EN50221_POLL_CAM_PRESENT | DVB_CA_EN50221_POLL_CAM_READY; + } else { + dprintk(MANTIS_DEBUG, 1, "CA Module not present or not ready"); + } + + return 0; +} + +int mantis_ca_init(struct mantis_pci *mantis) +{ + struct dvb_adapter *dvb_adapter = &mantis->dvb_adapter; + struct mantis_ca *ca; + int ca_flags = 0, result; + + dprintk(MANTIS_DEBUG, 1, "Initializing Mantis CA"); + ca = kzalloc(sizeof(struct mantis_ca), GFP_KERNEL); + if (!ca) { + dprintk(MANTIS_ERROR, 1, "Out of memory!, exiting .."); + result = -ENOMEM; + goto err; + } + + ca->ca_priv = mantis; + mantis->mantis_ca = ca; + ca_flags = DVB_CA_EN50221_FLAG_IRQ_CAMCHANGE; + /* register CA interface */ + ca->en50221.owner = THIS_MODULE; + ca->en50221.read_attribute_mem = mantis_ca_read_attr_mem; + ca->en50221.write_attribute_mem = mantis_ca_write_attr_mem; + ca->en50221.read_cam_control = mantis_ca_read_cam_ctl; + ca->en50221.write_cam_control = mantis_ca_write_cam_ctl; + ca->en50221.slot_reset = mantis_ca_slot_reset; + ca->en50221.slot_shutdown = mantis_ca_slot_shutdown; + ca->en50221.slot_ts_enable = mantis_ts_control; + ca->en50221.poll_slot_status = mantis_slot_status; + ca->en50221.data = ca; + + mutex_init(&ca->ca_lock); + + init_waitqueue_head(&ca->hif_data_wq); + init_waitqueue_head(&ca->hif_opdone_wq); + init_waitqueue_head(&ca->hif_write_wq); + + dprintk(MANTIS_ERROR, 1, "Registering EN50221 device"); + result = dvb_ca_en50221_init(dvb_adapter, &ca->en50221, ca_flags, 1); + if (result != 0) { + dprintk(MANTIS_ERROR, 1, "EN50221: Initialization failed <%d>", result); + goto err; + } + dprintk(MANTIS_ERROR, 1, "Registered EN50221 device"); + mantis_evmgr_init(ca); + return 0; +err: + kfree(ca); + return result; +} +EXPORT_SYMBOL_GPL(mantis_ca_init); + +void mantis_ca_exit(struct mantis_pci *mantis) +{ + struct mantis_ca *ca = mantis->mantis_ca; + + dprintk(MANTIS_DEBUG, 1, "Mantis CA exit"); + + mantis_evmgr_exit(ca); + dprintk(MANTIS_ERROR, 1, "Unregistering EN50221 device"); + if (ca) + dvb_ca_en50221_release(&ca->en50221); + + kfree(ca); +} +EXPORT_SYMBOL_GPL(mantis_ca_exit); diff --git a/drivers/media/dvb/mantis/mantis_ca.h b/drivers/media/dvb/mantis/mantis_ca.h new file mode 100644 index 00000000000..dc63e55f7ec --- /dev/null +++ b/drivers/media/dvb/mantis/mantis_ca.h @@ -0,0 +1,27 @@ +/* + Mantis PCI bridge driver + + Copyright (C) Manu Abraham (abraham.manu@gmail.com) + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +*/ + +#ifndef __MANTIS_CA_H +#define __MANTIS_CA_H + +extern int mantis_ca_init(struct mantis_pci *mantis); +extern void mantis_ca_exit(struct mantis_pci *mantis); + +#endif /* __MANTIS_CA_H */ diff --git a/drivers/media/dvb/mantis/mantis_cards.c b/drivers/media/dvb/mantis/mantis_cards.c new file mode 100644 index 00000000000..16f1708fd3b --- /dev/null +++ b/drivers/media/dvb/mantis/mantis_cards.c @@ -0,0 +1,305 @@ +/* + Mantis PCI bridge driver + + Copyright (C) Manu Abraham (abraham.manu@gmail.com) + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +*/ + +#include <linux/module.h> +#include <linux/moduleparam.h> +#include <linux/kernel.h> +#include <linux/pci.h> +#include <asm/irq.h> +#include <linux/interrupt.h> + +#include "dmxdev.h" +#include "dvbdev.h" +#include "dvb_demux.h" +#include "dvb_frontend.h" +#include "dvb_net.h" + +#include "mantis_common.h" + +#include "mantis_vp1033.h" +#include "mantis_vp1034.h" +#include "mantis_vp1041.h" +#include "mantis_vp2033.h" +#include "mantis_vp2040.h" +#include "mantis_vp3030.h" + +#include "mantis_dma.h" +#include "mantis_ca.h" +#include "mantis_dvb.h" +#include "mantis_uart.h" +#include "mantis_ioc.h" +#include "mantis_pci.h" +#include "mantis_i2c.h" +#include "mantis_reg.h" + +static unsigned int verbose; +module_param(verbose, int, 0644); +MODULE_PARM_DESC(verbose, "verbose startup messages, default is 1 (yes)"); + +static int devs; + +#define DRIVER_NAME "Mantis" + +static char *label[10] = { + "DMA", + "IRQ-0", + "IRQ-1", + "OCERR", + "PABRT", + "RIPRR", + "PPERR", + "FTRGT", + "RISCI", + "RACK" +}; + +static irqreturn_t mantis_irq_handler(int irq, void *dev_id) +{ + u32 stat = 0, mask = 0, lstat = 0, mstat = 0; + u32 rst_stat = 0, rst_mask = 0; + + struct mantis_pci *mantis; + struct mantis_ca *ca; + + mantis = (struct mantis_pci *) dev_id; + if (unlikely(mantis == NULL)) { + dprintk(MANTIS_ERROR, 1, "Mantis == NULL"); + return IRQ_NONE; + } + ca = mantis->mantis_ca; + + stat = mmread(MANTIS_INT_STAT); + mask = mmread(MANTIS_INT_MASK); + mstat = lstat = stat & ~MANTIS_INT_RISCSTAT; + if (!(stat & mask)) + return IRQ_NONE; + + rst_mask = MANTIS_GPIF_WRACK | + MANTIS_GPIF_OTHERR | + MANTIS_SBUF_WSTO | + MANTIS_GPIF_EXTIRQ; + + rst_stat = mmread(MANTIS_GPIF_STATUS); + rst_stat &= rst_mask; + mmwrite(rst_stat, MANTIS_GPIF_STATUS); + + mantis->mantis_int_stat = stat; + mantis->mantis_int_mask = mask; + dprintk(MANTIS_DEBUG, 0, "\n-- Stat=<%02x> Mask=<%02x> --", stat, mask); + if (stat & MANTIS_INT_RISCEN) { + dprintk(MANTIS_DEBUG, 0, "<%s>", label[0]); + } + if (stat & MANTIS_INT_IRQ0) { + dprintk(MANTIS_DEBUG, 0, "<%s>", label[1]); + mantis->gpif_status = rst_stat; + wake_up(&ca->hif_write_wq); + schedule_work(&ca->hif_evm_work); + } + if (stat & MANTIS_INT_IRQ1) { + dprintk(MANTIS_DEBUG, 0, "<%s>", label[2]); + schedule_work(&mantis->uart_work); + } + if (stat & MANTIS_INT_OCERR) { + dprintk(MANTIS_DEBUG, 0, "<%s>", label[3]); + } + if (stat & MANTIS_INT_PABORT) { + dprintk(MANTIS_DEBUG, 0, "<%s>", label[4]); + } + if (stat & MANTIS_INT_RIPERR) { + dprintk(MANTIS_DEBUG, 0, "<%s>", label[5]); + } + if (stat & MANTIS_INT_PPERR) { + dprintk(MANTIS_DEBUG, 0, "<%s>", label[6]); + } + if (stat & MANTIS_INT_FTRGT) { + dprintk(MANTIS_DEBUG, 0, "<%s>", label[7]); + } + if (stat & MANTIS_INT_RISCI) { + dprintk(MANTIS_DEBUG, 0, "<%s>", label[8]); + mantis->finished_block = (stat & MANTIS_INT_RISCSTAT) >> 28; + tasklet_schedule(&mantis->tasklet); + } + if (stat & MANTIS_INT_I2CDONE) { + dprintk(MANTIS_DEBUG, 0, "<%s>", label[9]); + wake_up(&mantis->i2c_wq); + } + mmwrite(stat, MANTIS_INT_STAT); + stat &= ~(MANTIS_INT_RISCEN | MANTIS_INT_I2CDONE | + MANTIS_INT_I2CRACK | MANTIS_INT_PCMCIA7 | + MANTIS_INT_PCMCIA6 | MANTIS_INT_PCMCIA5 | + MANTIS_INT_PCMCIA4 | MANTIS_INT_PCMCIA3 | + MANTIS_INT_PCMCIA2 | MANTIS_INT_PCMCIA1 | + MANTIS_INT_PCMCIA0 | MANTIS_INT_IRQ1 | + MANTIS_INT_IRQ0 | MANTIS_INT_OCERR | + MANTIS_INT_PABORT | MANTIS_INT_RIPERR | + MANTIS_INT_PPERR | MANTIS_INT_FTRGT | + MANTIS_INT_RISCI); + + if (stat) + dprintk(MANTIS_DEBUG, 0, "<Unknown> Stat=<%02x> Mask=<%02x>", stat, mask); + + dprintk(MANTIS_DEBUG, 0, "\n"); + return IRQ_HANDLED; +} + +static int __devinit mantis_pci_probe(struct pci_dev *pdev, const struct pci_device_id *pci_id) +{ + struct mantis_pci *mantis; + struct mantis_hwconfig *config; + int err = 0; + + mantis = kzalloc(sizeof(struct mantis_pci), GFP_KERNEL); + if (mantis == NULL) { + printk(KERN_ERR "%s ERROR: Out of memory\n", __func__); + err = -ENOMEM; + goto fail0; + } + + mantis->num = devs; + mantis->verbose = verbose; + mantis->pdev = pdev; + config = (struct mantis_hwconfig *) pci_id->driver_data; + config->irq_handler = &mantis_irq_handler; + mantis->hwconfig = config; + + err = mantis_pci_init(mantis); + if (err) { + dprintk(MANTIS_ERROR, 1, "ERROR: Mantis PCI initialization failed <%d>", err); + goto fail1; + } + + err = mantis_stream_control(mantis, STREAM_TO_HIF); + if (err < 0) { + dprintk(MANTIS_ERROR, 1, "ERROR: Mantis stream control failed <%d>", err); + goto fail1; + } + + err = mantis_i2c_init(mantis); + if (err < 0) { + dprintk(MANTIS_ERROR, 1, "ERROR: Mantis I2C initialization failed <%d>", err); + goto fail2; + } + + err = mantis_get_mac(mantis); + if (err < 0) { + dprintk(MANTIS_ERROR, 1, "ERROR: Mantis MAC address read failed <%d>", err); + goto fail2; + } + + err = mantis_dma_init(mantis); + if (err < 0) { + dprintk(MANTIS_ERROR, 1, "ERROR: Mantis DMA initialization failed <%d>", err); + goto fail3; + } + + err = mantis_dvb_init(mantis); + if (err < 0) { + dprintk(MANTIS_ERROR, 1, "ERROR: Mantis DVB initialization failed <%d>", err); + goto fail4; + } + err = mantis_uart_init(mantis); + if (err < 0) { + dprintk(MANTIS_ERROR, 1, "ERROR: Mantis UART initialization failed <%d>", err); + goto fail6; + } + + devs++; + + return err; + + + dprintk(MANTIS_ERROR, 1, "ERROR: Mantis UART exit! <%d>", err); + mantis_uart_exit(mantis); + +fail6: +fail4: + dprintk(MANTIS_ERROR, 1, "ERROR: Mantis DMA exit! <%d>", err); + mantis_dma_exit(mantis); + +fail3: + dprintk(MANTIS_ERROR, 1, "ERROR: Mantis I2C exit! <%d>", err); + mantis_i2c_exit(mantis); + +fail2: + dprintk(MANTIS_ERROR, 1, "ERROR: Mantis PCI exit! <%d>", err); + mantis_pci_exit(mantis); + +fail1: + dprintk(MANTIS_ERROR, 1, "ERROR: Mantis free! <%d>", err); + kfree(mantis); + +fail0: + return err; +} + +static void __devexit mantis_pci_remove(struct pci_dev *pdev) +{ + struct mantis_pci *mantis = pci_get_drvdata(pdev); + + if (mantis) { + + mantis_uart_exit(mantis); + mantis_dvb_exit(mantis); + mantis_dma_exit(mantis); + mantis_i2c_exit(mantis); + mantis_pci_exit(mantis); + kfree(mantis); + } + return; +} + +static struct pci_device_id mantis_pci_table[] = { + MAKE_ENTRY(TWINHAN_TECHNOLOGIES, MANTIS_VP_1033_DVB_S, &vp1033_config), + MAKE_ENTRY(TWINHAN_TECHNOLOGIES, MANTIS_VP_1034_DVB_S, &vp1034_config), + MAKE_ENTRY(TWINHAN_TECHNOLOGIES, MANTIS_VP_1041_DVB_S2, &vp1041_config), + MAKE_ENTRY(TECHNISAT, SKYSTAR_HD2_10, &vp1041_config), + MAKE_ENTRY(TECHNISAT, SKYSTAR_HD2_20, &vp1041_config), + MAKE_ENTRY(TERRATEC, CINERGY_S2_PCI_HD, &vp1041_config), + MAKE_ENTRY(TWINHAN_TECHNOLOGIES, MANTIS_VP_2033_DVB_C, &vp2033_config), + MAKE_ENTRY(TWINHAN_TECHNOLOGIES, MANTIS_VP_2040_DVB_C, &vp2040_config), + MAKE_ENTRY(TECHNISAT, CABLESTAR_HD2, &vp2040_config), + MAKE_ENTRY(TERRATEC, CINERGY_C, &vp2033_config), + MAKE_ENTRY(TWINHAN_TECHNOLOGIES, MANTIS_VP_3030_DVB_T, &vp3030_config), + { } +}; + +static struct pci_driver mantis_pci_driver = { + .name = DRIVER_NAME, + .id_table = mantis_pci_table, + .probe = mantis_pci_probe, + .remove = mantis_pci_remove, +}; + +static int __devinit mantis_init(void) +{ + return pci_register_driver(&mantis_pci_driver); +} + +static void __devexit mantis_exit(void) +{ + return pci_unregister_driver(&mantis_pci_driver); +} + +module_init(mantis_init); +module_exit(mantis_exit); + +MODULE_DESCRIPTION("MANTIS driver"); +MODULE_AUTHOR("Manu Abraham"); +MODULE_LICENSE("GPL"); diff --git a/drivers/media/dvb/mantis/mantis_common.h b/drivers/media/dvb/mantis/mantis_common.h new file mode 100644 index 00000000000..d0b645a483c --- /dev/null +++ b/drivers/media/dvb/mantis/mantis_common.h @@ -0,0 +1,179 @@ +/* + Mantis PCI bridge driver + + Copyright (C) Manu Abraham (abraham.manu@gmail.com) + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +*/ + +#ifndef __MANTIS_COMMON_H +#define __MANTIS_COMMON_H + +#include <linux/mutex.h> +#include <linux/workqueue.h> + +#include "mantis_uart.h" + +#include "mantis_link.h" + +#define MANTIS_ERROR 0 +#define MANTIS_NOTICE 1 +#define MANTIS_INFO 2 +#define MANTIS_DEBUG 3 +#define MANTIS_TMG 9 + +#define dprintk(y, z, format, arg...) do { \ + if (z) { \ + if ((mantis->verbose > MANTIS_ERROR) && (mantis->verbose > y)) \ + printk(KERN_ERR "%s (%d): " format "\n" , __func__ , mantis->num , ##arg); \ + else if ((mantis->verbose > MANTIS_NOTICE) && (mantis->verbose > y)) \ + printk(KERN_NOTICE "%s (%d): " format "\n" , __func__ , mantis->num , ##arg); \ + else if ((mantis->verbose > MANTIS_INFO) && (mantis->verbose > y)) \ + printk(KERN_INFO "%s (%d): " format "\n" , __func__ , mantis->num , ##arg); \ + else if ((mantis->verbose > MANTIS_DEBUG) && (mantis->verbose > y)) \ + printk(KERN_DEBUG "%s (%d): " format "\n" , __func__ , mantis->num , ##arg); \ + else if ((mantis->verbose > MANTIS_TMG) && (mantis->verbose > y)) \ + printk(KERN_DEBUG "%s (%d): " format "\n" , __func__ , mantis->num , ##arg); \ + } else { \ + if (mantis->verbose > y) \ + printk(format , ##arg); \ + } \ +} while(0) + +#define mwrite(dat, addr) writel((dat), addr) +#define mread(addr) readl(addr) + +#define mmwrite(dat, addr) mwrite((dat), (mantis->mmio + (addr))) +#define mmread(addr) mread(mantis->mmio + (addr)) + +#define MANTIS_TS_188 0 +#define MANTIS_TS_204 1 + +#define TWINHAN_TECHNOLOGIES 0x1822 +#define MANTIS 0x4e35 + +#define TECHNISAT 0x1ae4 +#define TERRATEC 0x153b + +#define MAKE_ENTRY(__subven, __subdev, __configptr) { \ + .vendor = TWINHAN_TECHNOLOGIES, \ + .device = MANTIS, \ + .subvendor = (__subven), \ + .subdevice = (__subdev), \ + .driver_data = (unsigned long) (__configptr) \ +} + +enum mantis_i2c_mode { + MANTIS_PAGE_MODE = 0, + MANTIS_BYTE_MODE, +}; + +struct mantis_pci; + +struct mantis_hwconfig { + char *model_name; + char *dev_type; + u32 ts_size; + + enum mantis_baud baud_rate; + enum mantis_parity parity; + u32 bytes; + + irqreturn_t (*irq_handler)(int irq, void *dev_id); + int (*frontend_init)(struct mantis_pci *mantis, struct dvb_frontend *fe); + + u8 power; + u8 reset; + + enum mantis_i2c_mode i2c_mode; +}; + +struct mantis_pci { + unsigned int verbose; + + /* PCI stuff */ + u16 vendor_id; + u16 device_id; + u16 subsystem_vendor; + u16 subsystem_device; + + u8 latency; + + struct pci_dev *pdev; + + unsigned long mantis_addr; + void __iomem *mmio; + + u8 irq; + u8 revision; + + unsigned int num; + + /* RISC Core */ + u32 finished_block; + u32 last_block; + u32 line_bytes; + u32 line_count; + u32 risc_pos; + u8 *buf_cpu; + dma_addr_t buf_dma; + u32 *risc_cpu; + dma_addr_t risc_dma; + + struct tasklet_struct tasklet; + + struct i2c_adapter adapter; + int i2c_rc; + wait_queue_head_t i2c_wq; + struct mutex i2c_lock; + + /* DVB stuff */ + struct dvb_adapter dvb_adapter; + struct dvb_frontend *fe; + struct dvb_demux demux; + struct dmxdev dmxdev; + struct dmx_frontend fe_hw; + struct dmx_frontend fe_mem; + struct dvb_net dvbnet; + + u8 feeds; + + struct mantis_hwconfig *hwconfig; + + u32 mantis_int_stat; + u32 mantis_int_mask; + + /* board specific */ + u8 mac_address[8]; + u32 sub_vendor_id; + u32 sub_device_id; + + /* A12 A13 A14 */ + u32 gpio_status; + + u32 gpif_status; + + struct mantis_ca *mantis_ca; + + wait_queue_head_t uart_wq; + struct work_struct uart_work; + spinlock_t uart_lock; + + struct input_dev *rc; +}; + +#define MANTIS_HIF_STATUS (mantis->gpio_status) + +#endif /* __MANTIS_COMMON_H */ diff --git a/drivers/media/dvb/mantis/mantis_core.c b/drivers/media/dvb/mantis/mantis_core.c new file mode 100644 index 00000000000..8113b23ce44 --- /dev/null +++ b/drivers/media/dvb/mantis/mantis_core.c @@ -0,0 +1,238 @@ +/* + Mantis PCI bridge driver + + Copyright (C) Manu Abraham (abraham.manu@gmail.com) + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +*/ + +#include "mantis_common.h" +#include "mantis_core.h" +#include "mantis_vp1033.h" +#include "mantis_vp1034.h" +#include "mantis_vp1041.h" +#include "mantis_vp2033.h" +#include "mantis_vp2040.h" +#include "mantis_vp3030.h" + +static int read_eeprom_byte(struct mantis_pci *mantis, u8 *data, u8 length) +{ + int err; + struct i2c_msg msg[] = { + { + .addr = 0x50, + .flags = 0, + .buf = data, + .len = 1 + }, { + .addr = 0x50, + .flags = I2C_M_RD, + .buf = data, + .len = length + }, + }; + + err = i2c_transfer(&mantis->adapter, msg, 2); + if (err < 0) { + dprintk(verbose, MANTIS_ERROR, 1, + "ERROR: i2c read: < err=%i d0=0x%02x d1=0x%02x >", + err, data[0], data[1]); + + return err; + } + + return 0; +} + +static int write_eeprom_byte(struct mantis_pci *mantis, u8 *data, u8 length) +{ + int err; + + struct i2c_msg msg = { + .addr = 0x50, + .flags = 0, + .buf = data, + .len = length + }; + + err = i2c_transfer(&mantis->adapter, &msg, 1); + if (err < 0) { + dprintk(verbose, MANTIS_ERROR, 1, + "ERROR: i2c write: < err=%i length=0x%02x d0=0x%02x, d1=0x%02x >", + err, length, data[0], data[1]); + + return err; + } + + return 0; +} + +static int get_mac_address(struct mantis_pci *mantis) +{ + int err; + + mantis->mac_address[0] = 0x08; + err = read_eeprom_byte(mantis, &mantis->mac_address[0], 6); + if (err < 0) { + dprintk(verbose, MANTIS_ERROR, 1, "Mantis EEPROM read error"); + + return err; + } + dprintk(verbose, MANTIS_ERROR, 0, + " MAC Address=[%02x:%02x:%02x:%02x:%02x:%02x]\n", + mantis->mac_address[0], mantis->mac_address[1], + mantis->mac_address[2], mantis->mac_address[3], + mantis->mac_address[4], mantis->mac_address[5]); + + return 0; +} + +#define MANTIS_MODEL_UNKNOWN "UNKNOWN" +#define MANTIS_DEV_UNKNOWN "UNKNOWN" + +struct mantis_hwconfig unknown_device = { + .model_name = MANTIS_MODEL_UNKNOWN, + .dev_type = MANTIS_DEV_UNKNOWN, +}; + +static void mantis_load_config(struct mantis_pci *mantis) +{ + switch (mantis->subsystem_device) { + case MANTIS_VP_1033_DVB_S: /* VP-1033 */ + mantis->hwconfig = &vp1033_mantis_config; + break; + case MANTIS_VP_1034_DVB_S: /* VP-1034 */ + mantis->hwconfig = &vp1034_mantis_config; + break; + case MANTIS_VP_1041_DVB_S2: /* VP-1041 */ + case TECHNISAT_SKYSTAR_HD2: + mantis->hwconfig = &vp1041_mantis_config; + break; + case MANTIS_VP_2033_DVB_C: /* VP-2033 */ + mantis->hwconfig = &vp2033_mantis_config; + break; + case MANTIS_VP_2040_DVB_C: /* VP-2040 */ + case TERRATEC_CINERGY_C_PCI: /* VP-2040 clone */ + case TECHNISAT_CABLESTAR_HD2: + mantis->hwconfig = &vp2040_mantis_config; + break; + case MANTIS_VP_3030_DVB_T: /* VP-3030 */ + mantis->hwconfig = &vp3030_mantis_config; + break; + default: + mantis->hwconfig = &unknown_device; + break; + } +} + +int mantis_core_init(struct mantis_pci *mantis) +{ + int err = 0; + + mantis_load_config(mantis); + dprintk(verbose, MANTIS_ERROR, 0, "found a %s PCI %s device on (%02x:%02x.%x),\n", + mantis->hwconfig->model_name, mantis->hwconfig->dev_type, + mantis->pdev->bus->number, PCI_SLOT(mantis->pdev->devfn), PCI_FUNC(mantis->pdev->devfn)); + dprintk(verbose, MANTIS_ERROR, 0, " Mantis Rev %d [%04x:%04x], ", + mantis->revision, + mantis->subsystem_vendor, mantis->subsystem_device); + dprintk(verbose, MANTIS_ERROR, 0, + "irq: %d, latency: %d\n memory: 0x%lx, mmio: 0x%p\n", + mantis->pdev->irq, mantis->latency, + mantis->mantis_addr, mantis->mantis_mmio); + + err = mantis_i2c_init(mantis); + if (err < 0) { + dprintk(verbose, MANTIS_ERROR, 1, "Mantis I2C init failed"); + return err; + } + err = get_mac_address(mantis); + if (err < 0) { + dprintk(verbose, MANTIS_ERROR, 1, "get MAC address failed"); + return err; + } + err = mantis_dma_init(mantis); + if (err < 0) { + dprintk(verbose, MANTIS_ERROR, 1, "Mantis DMA init failed"); + return err; + } + err = mantis_dvb_init(mantis); + if (err < 0) { + dprintk(verbose, MANTIS_DEBUG, 1, "Mantis DVB init failed"); + return err; + } + err = mantis_uart_init(mantis); + if (err < 0) { + dprintk(verbose, MANTIS_DEBUG, 1, "Mantis UART init failed"); + return err; + } + + return 0; +} + +int mantis_core_exit(struct mantis_pci *mantis) +{ + mantis_dma_stop(mantis); + dprintk(verbose, MANTIS_ERROR, 1, "DMA engine stopping"); + + mantis_uart_exit(mantis); + dprintk(verbose, MANTIS_ERROR, 1, "UART exit failed"); + + if (mantis_dma_exit(mantis) < 0) + dprintk(verbose, MANTIS_ERROR, 1, "DMA exit failed"); + if (mantis_dvb_exit(mantis) < 0) + dprintk(verbose, MANTIS_ERROR, 1, "DVB exit failed"); + if (mantis_i2c_exit(mantis) < 0) + dprintk(verbose, MANTIS_ERROR, 1, "I2C adapter delete.. failed"); + + return 0; +} + +/* Turn the given bit on or off. */ +void gpio_set_bits(struct mantis_pci *mantis, u32 bitpos, u8 value) +{ + u32 cur; + + cur = mmread(MANTIS_GPIF_ADDR); + if (value) + mantis->gpio_status = cur | (1 << bitpos); + else + mantis->gpio_status = cur & (~(1 << bitpos)); + + mmwrite(mantis->gpio_status, MANTIS_GPIF_ADDR); + mmwrite(0x00, MANTIS_GPIF_DOUT); + udelay(100); +} + +/* direction = 0 , no CI passthrough ; 1 , CI passthrough */ +void mantis_set_direction(struct mantis_pci *mantis, int direction) +{ + u32 reg; + + reg = mmread(0x28); + dprintk(verbose, MANTIS_DEBUG, 1, "TS direction setup"); + if (direction == 0x01) { + /* to CI */ + reg |= 0x04; + mmwrite(reg, 0x28); + reg &= 0xff - 0x04; + mmwrite(reg, 0x28); + } else { + reg &= 0xff - 0x04; + mmwrite(reg, 0x28); + reg |= 0x04; + mmwrite(reg, 0x28); + } +} diff --git a/drivers/media/dvb/mantis/mantis_core.h b/drivers/media/dvb/mantis/mantis_core.h new file mode 100644 index 00000000000..833ee42e694 --- /dev/null +++ b/drivers/media/dvb/mantis/mantis_core.h @@ -0,0 +1,57 @@ +/* + Mantis PCI bridge driver + + Copyright (C) Manu Abraham (abraham.manu@gmail.com) + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +*/ + +#ifndef __MANTIS_CORE_H +#define __MANTIS_CORE_H + +#include "mantis_common.h" + + +#define FE_TYPE_SAT 0 +#define FE_TYPE_CAB 1 +#define FE_TYPE_TER 2 + +#define FE_TYPE_TS204 0 +#define FE_TYPE_TS188 1 + + +struct vendorname { + u8 *sub_vendor_name; + u32 sub_vendor_id; +}; + +struct devicetype { + u8 *sub_device_name; + u32 sub_device_id; + u8 device_type; + u32 type_flags; +}; + + +extern int mantis_dma_init(struct mantis_pci *mantis); +extern int mantis_dma_exit(struct mantis_pci *mantis); +extern void mantis_dma_start(struct mantis_pci *mantis); +extern void mantis_dma_stop(struct mantis_pci *mantis); +extern int mantis_i2c_init(struct mantis_pci *mantis); +extern int mantis_i2c_exit(struct mantis_pci *mantis); +extern int mantis_core_init(struct mantis_pci *mantis); +extern int mantis_core_exit(struct mantis_pci *mantis); + +#endif /* __MANTIS_CORE_H */ diff --git a/drivers/media/dvb/mantis/mantis_dma.c b/drivers/media/dvb/mantis/mantis_dma.c new file mode 100644 index 00000000000..46202a4012a --- /dev/null +++ b/drivers/media/dvb/mantis/mantis_dma.c @@ -0,0 +1,256 @@ +/* + Mantis PCI bridge driver + + Copyright (C) Manu Abraham (abraham.manu@gmail.com) + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +*/ + +#include <linux/kernel.h> +#include <asm/page.h> +#include <linux/vmalloc.h> +#include <linux/pci.h> + +#include <asm/irq.h> +#include <linux/signal.h> +#include <linux/sched.h> +#include <linux/interrupt.h> + +#include "dmxdev.h" +#include "dvbdev.h" +#include "dvb_demux.h" +#include "dvb_frontend.h" +#include "dvb_net.h" + +#include "mantis_common.h" +#include "mantis_reg.h" +#include "mantis_dma.h" + +#define RISC_WRITE (0x01 << 28) +#define RISC_JUMP (0x07 << 28) +#define RISC_IRQ (0x01 << 24) + +#define RISC_STATUS(status) ((((~status) & 0x0f) << 20) | ((status & 0x0f) << 16)) +#define RISC_FLUSH() (mantis->risc_pos = 0) +#define RISC_INSTR(opcode) (mantis->risc_cpu[mantis->risc_pos++] = cpu_to_le32(opcode)) + +#define MANTIS_BUF_SIZE (64 * 1024) +#define MANTIS_BLOCK_BYTES (MANTIS_BUF_SIZE >> 4) +#define MANTIS_BLOCK_COUNT (1 << 4) +#define MANTIS_RISC_SIZE PAGE_SIZE + +int mantis_dma_exit(struct mantis_pci *mantis) +{ + if (mantis->buf_cpu) { + dprintk(MANTIS_ERROR, 1, + "DMA=0x%lx cpu=0x%p size=%d", + (unsigned long) mantis->buf_dma, + mantis->buf_cpu, + MANTIS_BUF_SIZE); + + pci_free_consistent(mantis->pdev, MANTIS_BUF_SIZE, + mantis->buf_cpu, mantis->buf_dma); + + mantis->buf_cpu = NULL; + } + if (mantis->risc_cpu) { + dprintk(MANTIS_ERROR, 1, + "RISC=0x%lx cpu=0x%p size=%lx", + (unsigned long) mantis->risc_dma, + mantis->risc_cpu, + MANTIS_RISC_SIZE); + + pci_free_consistent(mantis->pdev, MANTIS_RISC_SIZE, + mantis->risc_cpu, mantis->risc_dma); + + mantis->risc_cpu = NULL; + } + + return 0; +} +EXPORT_SYMBOL_GPL(mantis_dma_exit); + +static inline int mantis_alloc_buffers(struct mantis_pci *mantis) +{ + if (!mantis->buf_cpu) { + mantis->buf_cpu = pci_alloc_consistent(mantis->pdev, + MANTIS_BUF_SIZE, + &mantis->buf_dma); + if (!mantis->buf_cpu) { + dprintk(MANTIS_ERROR, 1, + "DMA buffer allocation failed"); + + goto err; + } + dprintk(MANTIS_ERROR, 1, + "DMA=0x%lx cpu=0x%p size=%d", + (unsigned long) mantis->buf_dma, + mantis->buf_cpu, MANTIS_BUF_SIZE); + } + if (!mantis->risc_cpu) { + mantis->risc_cpu = pci_alloc_consistent(mantis->pdev, + MANTIS_RISC_SIZE, + &mantis->risc_dma); + + if (!mantis->risc_cpu) { + dprintk(MANTIS_ERROR, 1, + "RISC program allocation failed"); + + mantis_dma_exit(mantis); + + goto err; + } + dprintk(MANTIS_ERROR, 1, + "RISC=0x%lx cpu=0x%p size=%lx", + (unsigned long) mantis->risc_dma, + mantis->risc_cpu, MANTIS_RISC_SIZE); + } + + return 0; +err: + dprintk(MANTIS_ERROR, 1, "Out of memory (?) ....."); + return -ENOMEM; +} + +static inline int mantis_calc_lines(struct mantis_pci *mantis) +{ + mantis->line_bytes = MANTIS_BLOCK_BYTES; + mantis->line_count = MANTIS_BLOCK_COUNT; + + while (mantis->line_bytes > 4095) { + mantis->line_bytes >>= 1; + mantis->line_count <<= 1; + } + + dprintk(MANTIS_DEBUG, 1, "Mantis RISC block bytes=[%d], line bytes=[%d], line count=[%d]", + MANTIS_BLOCK_BYTES, mantis->line_bytes, mantis->line_count); + + if (mantis->line_count > 255) { + dprintk(MANTIS_ERROR, 1, "Buffer size error"); + return -EINVAL; + } + + return 0; +} + +int mantis_dma_init(struct mantis_pci *mantis) +{ + int err = 0; + + dprintk(MANTIS_DEBUG, 1, "Mantis DMA init"); + if (mantis_alloc_buffers(mantis) < 0) { + dprintk(MANTIS_ERROR, 1, "Error allocating DMA buffer"); + + /* Stop RISC Engine */ + mmwrite(0, MANTIS_DMA_CTL); + + goto err; + } + err = mantis_calc_lines(mantis); + if (err < 0) { + dprintk(MANTIS_ERROR, 1, "Mantis calc lines failed"); + + goto err; + } + + return 0; +err: + return err; +} +EXPORT_SYMBOL_GPL(mantis_dma_init); + +static inline void mantis_risc_program(struct mantis_pci *mantis) +{ + u32 buf_pos = 0; + u32 line; + + dprintk(MANTIS_DEBUG, 1, "Mantis create RISC program"); + RISC_FLUSH(); + + dprintk(MANTIS_DEBUG, 1, "risc len lines %u, bytes per line %u", + mantis->line_count, mantis->line_bytes); + + for (line = 0; line < mantis->line_count; line++) { + dprintk(MANTIS_DEBUG, 1, "RISC PROG line=[%d]", line); + if (!(buf_pos % MANTIS_BLOCK_BYTES)) { + RISC_INSTR(RISC_WRITE | + RISC_IRQ | + RISC_STATUS(((buf_pos / MANTIS_BLOCK_BYTES) + + (MANTIS_BLOCK_COUNT - 1)) % + MANTIS_BLOCK_COUNT) | + mantis->line_bytes); + } else { + RISC_INSTR(RISC_WRITE | mantis->line_bytes); + } + RISC_INSTR(mantis->buf_dma + buf_pos); + buf_pos += mantis->line_bytes; + } + RISC_INSTR(RISC_JUMP); + RISC_INSTR(mantis->risc_dma); +} + +void mantis_dma_start(struct mantis_pci *mantis) +{ + dprintk(MANTIS_DEBUG, 1, "Mantis Start DMA engine"); + + mantis_risc_program(mantis); + mmwrite(mantis->risc_dma, MANTIS_RISC_START); + mmwrite(mmread(MANTIS_GPIF_ADDR) | MANTIS_GPIF_HIFRDWRN, MANTIS_GPIF_ADDR); + + mmwrite(0, MANTIS_DMA_CTL); + mantis->last_block = mantis->finished_block = 0; + + mmwrite(mmread(MANTIS_INT_MASK) | MANTIS_INT_RISCI, MANTIS_INT_MASK); + + mmwrite(MANTIS_FIFO_EN | MANTIS_DCAP_EN + | MANTIS_RISC_EN, MANTIS_DMA_CTL); + +} + +void mantis_dma_stop(struct mantis_pci *mantis) +{ + u32 stat = 0, mask = 0; + + stat = mmread(MANTIS_INT_STAT); + mask = mmread(MANTIS_INT_MASK); + dprintk(MANTIS_DEBUG, 1, "Mantis Stop DMA engine"); + + mmwrite((mmread(MANTIS_GPIF_ADDR) & (~(MANTIS_GPIF_HIFRDWRN))), MANTIS_GPIF_ADDR); + + mmwrite((mmread(MANTIS_DMA_CTL) & ~(MANTIS_FIFO_EN | + MANTIS_DCAP_EN | + MANTIS_RISC_EN)), MANTIS_DMA_CTL); + + mmwrite(mmread(MANTIS_INT_STAT), MANTIS_INT_STAT); + + mmwrite(mmread(MANTIS_INT_MASK) & ~(MANTIS_INT_RISCI | + MANTIS_INT_RISCEN), MANTIS_INT_MASK); +} + + +void mantis_dma_xfer(unsigned long data) +{ + struct mantis_pci *mantis = (struct mantis_pci *) data; + struct mantis_hwconfig *config = mantis->hwconfig; + + while (mantis->last_block != mantis->finished_block) { + dprintk(MANTIS_DEBUG, 1, "last block=[%d] finished block=[%d]", + mantis->last_block, mantis->finished_block); + + (config->ts_size ? dvb_dmx_swfilter_204 : dvb_dmx_swfilter) + (&mantis->demux, &mantis->buf_cpu[mantis->last_block * MANTIS_BLOCK_BYTES], MANTIS_BLOCK_BYTES); + mantis->last_block = (mantis->last_block + 1) % MANTIS_BLOCK_COUNT; + } +} diff --git a/drivers/media/dvb/mantis/mantis_dma.h b/drivers/media/dvb/mantis/mantis_dma.h new file mode 100644 index 00000000000..6be00fa8209 --- /dev/null +++ b/drivers/media/dvb/mantis/mantis_dma.h @@ -0,0 +1,30 @@ +/* + Mantis PCI bridge driver + + Copyright (C) Manu Abraham (abraham.manu@gmail.com) + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +*/ + +#ifndef __MANTIS_DMA_H +#define __MANTIS_DMA_H + +extern int mantis_dma_init(struct mantis_pci *mantis); +extern int mantis_dma_exit(struct mantis_pci *mantis); +extern void mantis_dma_start(struct mantis_pci *mantis); +extern void mantis_dma_stop(struct mantis_pci *mantis); +extern void mantis_dma_xfer(unsigned long data); + +#endif /* __MANTIS_DMA_H */ diff --git a/drivers/media/dvb/mantis/mantis_dvb.c b/drivers/media/dvb/mantis/mantis_dvb.c new file mode 100644 index 00000000000..99d82eec3b0 --- /dev/null +++ b/drivers/media/dvb/mantis/mantis_dvb.c @@ -0,0 +1,296 @@ +/* + Mantis PCI bridge driver + Copyright (C) Manu Abraham (abraham.manu@gmail.com) + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +*/ + +#include <linux/kernel.h> +#include <linux/bitops.h> + +#include <linux/signal.h> +#include <linux/sched.h> +#include <linux/interrupt.h> +#include <linux/pci.h> +#include <linux/i2c.h> + +#include "dmxdev.h" +#include "dvbdev.h" +#include "dvb_demux.h" +#include "dvb_frontend.h" +#include "dvb_net.h" + +#include "mantis_common.h" +#include "mantis_dma.h" +#include "mantis_ca.h" +#include "mantis_ioc.h" +#include "mantis_dvb.h" + +DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr); + +int mantis_frontend_power(struct mantis_pci *mantis, enum mantis_power power) +{ + struct mantis_hwconfig *config = mantis->hwconfig; + + switch (power) { + case POWER_ON: + dprintk(MANTIS_DEBUG, 1, "Power ON"); + gpio_set_bits(mantis, config->power, POWER_ON); + msleep(100); + gpio_set_bits(mantis, config->power, POWER_ON); + msleep(100); + break; + + case POWER_OFF: + dprintk(MANTIS_DEBUG, 1, "Power OFF"); + gpio_set_bits(mantis, config->power, POWER_OFF); + msleep(100); + break; + + default: + dprintk(MANTIS_DEBUG, 1, "Unknown state <%02x>", power); + return -1; + } + + return 0; +} +EXPORT_SYMBOL_GPL(mantis_frontend_power); + +void mantis_frontend_soft_reset(struct mantis_pci *mantis) +{ + struct mantis_hwconfig *config = mantis->hwconfig; + + dprintk(MANTIS_DEBUG, 1, "Frontend RESET"); + gpio_set_bits(mantis, config->reset, 0); + msleep(100); + gpio_set_bits(mantis, config->reset, 0); + msleep(100); + gpio_set_bits(mantis, config->reset, 1); + msleep(100); + gpio_set_bits(mantis, config->reset, 1); + msleep(100); + + return; +} +EXPORT_SYMBOL_GPL(mantis_frontend_soft_reset); + +static int mantis_frontend_shutdown(struct mantis_pci *mantis) +{ + int err; + + mantis_frontend_soft_reset(mantis); + err = mantis_frontend_power(mantis, POWER_OFF); + if (err != 0) { + dprintk(MANTIS_ERROR, 1, "Frontend POWER OFF failed! <%d>", err); + return 1; + } + + return 0; +} + +static int mantis_dvb_start_feed(struct dvb_demux_feed *dvbdmxfeed) +{ + struct dvb_demux *dvbdmx = dvbdmxfeed->demux; + struct mantis_pci *mantis = dvbdmx->priv; + + dprintk(MANTIS_DEBUG, 1, "Mantis DVB Start feed"); + if (!dvbdmx->dmx.frontend) { + dprintk(MANTIS_DEBUG, 1, "no frontend ?"); + return -EINVAL; + } + + mantis->feeds++; + dprintk(MANTIS_DEBUG, 1, "mantis start feed, feeds=%d", mantis->feeds); + + if (mantis->feeds == 1) { + dprintk(MANTIS_DEBUG, 1, "mantis start feed & dma"); + mantis_dma_start(mantis); + } + + return mantis->feeds; +} + +static int mantis_dvb_stop_feed(struct dvb_demux_feed *dvbdmxfeed) +{ + struct dvb_demux *dvbdmx = dvbdmxfeed->demux; + struct mantis_pci *mantis = dvbdmx->priv; + + dprintk(MANTIS_DEBUG, 1, "Mantis DVB Stop feed"); + if (!dvbdmx->dmx.frontend) { + dprintk(MANTIS_DEBUG, 1, "no frontend ?"); + return -EINVAL; + } + + mantis->feeds--; + if (mantis->feeds == 0) { + dprintk(MANTIS_DEBUG, 1, "mantis stop feed and dma"); + mantis_dma_stop(mantis); + } + + return 0; +} + +int __devinit mantis_dvb_init(struct mantis_pci *mantis) +{ + struct mantis_hwconfig *config = mantis->hwconfig; + int result = -1; + + dprintk(MANTIS_DEBUG, 1, "dvb_register_adapter"); + + result = dvb_register_adapter(&mantis->dvb_adapter, + "Mantis DVB adapter", + THIS_MODULE, + &mantis->pdev->dev, + adapter_nr); + + if (result < 0) { + + dprintk(MANTIS_ERROR, 1, "Error registering adapter"); + return -ENODEV; + } + + mantis->dvb_adapter.priv = mantis; + mantis->demux.dmx.capabilities = DMX_TS_FILTERING | + DMX_SECTION_FILTERING | + DMX_MEMORY_BASED_FILTERING; + + mantis->demux.priv = mantis; + mantis->demux.filternum = 256; + mantis->demux.feednum = 256; + mantis->demux.start_feed = mantis_dvb_start_feed; + mantis->demux.stop_feed = mantis_dvb_stop_feed; + mantis->demux.write_to_decoder = NULL; + + dprintk(MANTIS_DEBUG, 1, "dvb_dmx_init"); + result = dvb_dmx_init(&mantis->demux); + if (result < 0) { + dprintk(MANTIS_ERROR, 1, "dvb_dmx_init failed, ERROR=%d", result); + + goto err0; + } + + mantis->dmxdev.filternum = 256; + mantis->dmxdev.demux = &mantis->demux.dmx; + mantis->dmxdev.capabilities = 0; + dprintk(MANTIS_DEBUG, 1, "dvb_dmxdev_init"); + + result = dvb_dmxdev_init(&mantis->dmxdev, &mantis->dvb_adapter); + if (result < 0) { + + dprintk(MANTIS_ERROR, 1, "dvb_dmxdev_init failed, ERROR=%d", result); + goto err1; + } + + mantis->fe_hw.source = DMX_FRONTEND_0; + result = mantis->demux.dmx.add_frontend(&mantis->demux.dmx, &mantis->fe_hw); + if (result < 0) { + + dprintk(MANTIS_ERROR, 1, "dvb_dmx_init failed, ERROR=%d", result); + goto err2; + } + + mantis->fe_mem.source = DMX_MEMORY_FE; + result = mantis->demux.dmx.add_frontend(&mantis->demux.dmx, &mantis->fe_mem); + if (result < 0) { + dprintk(MANTIS_ERROR, 1, "dvb_dmx_init failed, ERROR=%d", result); + goto err3; + } + + result = mantis->demux.dmx.connect_frontend(&mantis->demux.dmx, &mantis->fe_hw); + if (result < 0) { + dprintk(MANTIS_ERROR, 1, "dvb_dmx_init failed, ERROR=%d", result); + goto err4; + } + + dvb_net_init(&mantis->dvb_adapter, &mantis->dvbnet, &mantis->demux.dmx); + tasklet_init(&mantis->tasklet, mantis_dma_xfer, (unsigned long) mantis); + if (mantis->hwconfig) { + result = config->frontend_init(mantis, mantis->fe); + if (result < 0) { + dprintk(MANTIS_ERROR, 1, "!!! NO Frontends found !!!"); + goto err5; + } else { + if (mantis->fe == NULL) { + dprintk(MANTIS_ERROR, 1, "FE <NULL>"); + goto err5; + } + + if (dvb_register_frontend(&mantis->dvb_adapter, mantis->fe)) { + dprintk(MANTIS_ERROR, 1, "ERROR: Frontend registration failed"); + + if (mantis->fe->ops.release) + mantis->fe->ops.release(mantis->fe); + + mantis->fe = NULL; + goto err5; + } + } + } + + return 0; + + /* Error conditions .. */ +err5: + tasklet_kill(&mantis->tasklet); + dvb_net_release(&mantis->dvbnet); + dvb_unregister_frontend(mantis->fe); + dvb_frontend_detach(mantis->fe); +err4: + mantis->demux.dmx.remove_frontend(&mantis->demux.dmx, &mantis->fe_mem); + +err3: + mantis->demux.dmx.remove_frontend(&mantis->demux.dmx, &mantis->fe_hw); + +err2: + dvb_dmxdev_release(&mantis->dmxdev); + +err1: + dvb_dmx_release(&mantis->demux); + +err0: + dvb_unregister_adapter(&mantis->dvb_adapter); + + return result; +} +EXPORT_SYMBOL_GPL(mantis_dvb_init); + +int __devexit mantis_dvb_exit(struct mantis_pci *mantis) +{ + int err; + + if (mantis->fe) { + /* mantis_ca_exit(mantis); */ + err = mantis_frontend_shutdown(mantis); + if (err != 0) + dprintk(MANTIS_ERROR, 1, "Frontend exit while POWER ON! <%d>", err); + dvb_unregister_frontend(mantis->fe); + dvb_frontend_detach(mantis->fe); + } + + tasklet_kill(&mantis->tasklet); + dvb_net_release(&mantis->dvbnet); + + mantis->demux.dmx.remove_frontend(&mantis->demux.dmx, &mantis->fe_mem); + mantis->demux.dmx.remove_frontend(&mantis->demux.dmx, &mantis->fe_hw); + + dvb_dmxdev_release(&mantis->dmxdev); + dvb_dmx_release(&mantis->demux); + + dprintk(MANTIS_DEBUG, 1, "dvb_unregister_adapter"); + dvb_unregister_adapter(&mantis->dvb_adapter); + + return 0; +} +EXPORT_SYMBOL_GPL(mantis_dvb_exit); diff --git a/drivers/media/dvb/mantis/mantis_dvb.h b/drivers/media/dvb/mantis/mantis_dvb.h new file mode 100644 index 00000000000..464199db304 --- /dev/null +++ b/drivers/media/dvb/mantis/mantis_dvb.h @@ -0,0 +1,35 @@ +/* + Mantis PCI bridge driver + + Copyright (C) Manu Abraham (abraham.manu@gmail.com) + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +*/ + +#ifndef __MANTIS_DVB_H +#define __MANTIS_DVB_H + +enum mantis_power { + POWER_OFF = 0, + POWER_ON = 1 +}; + +extern int mantis_frontend_power(struct mantis_pci *mantis, enum mantis_power power); +extern void mantis_frontend_soft_reset(struct mantis_pci *mantis); + +extern int mantis_dvb_init(struct mantis_pci *mantis); +extern int mantis_dvb_exit(struct mantis_pci *mantis); + +#endif /* __MANTIS_DVB_H */ diff --git a/drivers/media/dvb/mantis/mantis_evm.c b/drivers/media/dvb/mantis/mantis_evm.c new file mode 100644 index 00000000000..a7b369a439d --- /dev/null +++ b/drivers/media/dvb/mantis/mantis_evm.c @@ -0,0 +1,117 @@ +/* + Mantis PCI bridge driver + + Copyright (C) Manu Abraham (abraham.manu@gmail.com) + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +*/ + +#include <linux/kernel.h> + +#include <linux/signal.h> +#include <linux/sched.h> +#include <linux/interrupt.h> + +#include "dmxdev.h" +#include "dvbdev.h" +#include "dvb_demux.h" +#include "dvb_frontend.h" +#include "dvb_net.h" + +#include "mantis_common.h" +#include "mantis_link.h" +#include "mantis_hif.h" +#include "mantis_reg.h" + +static void mantis_hifevm_work(struct work_struct *work) +{ + struct mantis_ca *ca = container_of(work, struct mantis_ca, hif_evm_work); + struct mantis_pci *mantis = ca->ca_priv; + + u32 gpif_stat, gpif_mask; + + gpif_stat = mmread(MANTIS_GPIF_STATUS); + gpif_mask = mmread(MANTIS_GPIF_IRQCFG); + + if (gpif_stat & MANTIS_GPIF_DETSTAT) { + if (gpif_stat & MANTIS_CARD_PLUGIN) { + dprintk(MANTIS_DEBUG, 1, "Event Mgr: Adapter(%d) Slot(0): CAM Plugin", mantis->num); + mmwrite(0xdada0000, MANTIS_CARD_RESET); + mantis_event_cam_plugin(ca); + dvb_ca_en50221_camchange_irq(&ca->en50221, + 0, + DVB_CA_EN50221_CAMCHANGE_INSERTED); + } + } else { + if (gpif_stat & MANTIS_CARD_PLUGOUT) { + dprintk(MANTIS_DEBUG, 1, "Event Mgr: Adapter(%d) Slot(0): CAM Unplug", mantis->num); + mmwrite(0xdada0000, MANTIS_CARD_RESET); + mantis_event_cam_unplug(ca); + dvb_ca_en50221_camchange_irq(&ca->en50221, + 0, + DVB_CA_EN50221_CAMCHANGE_REMOVED); + } + } + + if (mantis->gpif_status & MANTIS_GPIF_EXTIRQ) + dprintk(MANTIS_DEBUG, 1, "Event Mgr: Adapter(%d) Slot(0): Ext IRQ", mantis->num); + + if (mantis->gpif_status & MANTIS_SBUF_WSTO) + dprintk(MANTIS_DEBUG, 1, "Event Mgr: Adapter(%d) Slot(0): Smart Buffer Timeout", mantis->num); + + if (mantis->gpif_status & MANTIS_GPIF_OTHERR) + dprintk(MANTIS_DEBUG, 1, "Event Mgr: Adapter(%d) Slot(0): Alignment Error", mantis->num); + + if (gpif_stat & MANTIS_SBUF_OVFLW) + dprintk(MANTIS_DEBUG, 1, "Event Mgr: Adapter(%d) Slot(0): Smart Buffer Overflow", mantis->num); + + if (gpif_stat & MANTIS_GPIF_BRRDY) + dprintk(MANTIS_DEBUG, 1, "Event Mgr: Adapter(%d) Slot(0): Smart Buffer Read Ready", mantis->num); + + if (gpif_stat & MANTIS_GPIF_INTSTAT) + dprintk(MANTIS_DEBUG, 1, "Event Mgr: Adapter(%d) Slot(0): GPIF IRQ", mantis->num); + + if (gpif_stat & MANTIS_SBUF_EMPTY) + dprintk(MANTIS_DEBUG, 1, "Event Mgr: Adapter(%d) Slot(0): Smart Buffer Empty", mantis->num); + + if (gpif_stat & MANTIS_SBUF_OPDONE) { + dprintk(MANTIS_DEBUG, 1, "Event Mgr: Adapter(%d) Slot(0): Smart Buffer operation complete", mantis->num); + ca->sbuf_status = MANTIS_SBUF_DATA_AVAIL; + ca->hif_event = MANTIS_SBUF_OPDONE; + wake_up(&ca->hif_opdone_wq); + } +} + +int mantis_evmgr_init(struct mantis_ca *ca) +{ + struct mantis_pci *mantis = ca->ca_priv; + + dprintk(MANTIS_DEBUG, 1, "Initializing Mantis Host I/F Event manager"); + INIT_WORK(&ca->hif_evm_work, mantis_hifevm_work); + mantis_pcmcia_init(ca); + schedule_work(&ca->hif_evm_work); + mantis_hif_init(ca); + return 0; +} + +void mantis_evmgr_exit(struct mantis_ca *ca) +{ + struct mantis_pci *mantis = ca->ca_priv; + + dprintk(MANTIS_DEBUG, 1, "Mantis Host I/F Event manager exiting"); + flush_scheduled_work(); + mantis_hif_exit(ca); + mantis_pcmcia_exit(ca); +} diff --git a/drivers/media/dvb/mantis/mantis_hif.c b/drivers/media/dvb/mantis/mantis_hif.c new file mode 100644 index 00000000000..7477dac628b --- /dev/null +++ b/drivers/media/dvb/mantis/mantis_hif.c @@ -0,0 +1,240 @@ +/* + Mantis PCI bridge driver + + Copyright (C) Manu Abraham (abraham.manu@gmail.com) + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +*/ + +#include <linux/kernel.h> +#include <linux/signal.h> +#include <linux/sched.h> + +#include <linux/signal.h> +#include <linux/sched.h> +#include <linux/interrupt.h> + +#include "dmxdev.h" +#include "dvbdev.h" +#include "dvb_demux.h" +#include "dvb_frontend.h" +#include "dvb_net.h" + +#include "mantis_common.h" + +#include "mantis_hif.h" +#include "mantis_link.h" /* temporary due to physical layer stuff */ + +#include "mantis_reg.h" + + +static int mantis_hif_sbuf_opdone_wait(struct mantis_ca *ca) +{ + struct mantis_pci *mantis = ca->ca_priv; + int rc = 0; + + if (wait_event_timeout(ca->hif_opdone_wq, + ca->hif_event & MANTIS_SBUF_OPDONE, + msecs_to_jiffies(500)) == -ERESTARTSYS) { + + dprintk(MANTIS_ERROR, 1, "Adapter(%d) Slot(0): Smart buffer operation timeout !", mantis->num); + rc = -EREMOTEIO; + } + dprintk(MANTIS_DEBUG, 1, "Smart Buffer Operation complete"); + ca->hif_event &= ~MANTIS_SBUF_OPDONE; + return rc; +} + +static int mantis_hif_write_wait(struct mantis_ca *ca) +{ + struct mantis_pci *mantis = ca->ca_priv; + u32 opdone = 0, timeout = 0; + int rc = 0; + + if (wait_event_timeout(ca->hif_write_wq, + mantis->gpif_status & MANTIS_GPIF_WRACK, + msecs_to_jiffies(500)) == -ERESTARTSYS) { + + dprintk(MANTIS_ERROR, 1, "Adapter(%d) Slot(0): Write ACK timed out !", mantis->num); + rc = -EREMOTEIO; + } + dprintk(MANTIS_DEBUG, 1, "Write Acknowledged"); + mantis->gpif_status &= ~MANTIS_GPIF_WRACK; + while (!opdone) { + opdone = (mmread(MANTIS_GPIF_STATUS) & MANTIS_SBUF_OPDONE); + udelay(500); + timeout++; + if (timeout > 100) { + dprintk(MANTIS_ERROR, 1, "Adater(%d) Slot(0): Write operation timed out!", mantis->num); + rc = -ETIMEDOUT; + break; + } + } + dprintk(MANTIS_DEBUG, 1, "HIF Write success"); + return rc; +} + + +int mantis_hif_read_mem(struct mantis_ca *ca, u32 addr) +{ + struct mantis_pci *mantis = ca->ca_priv; + u32 hif_addr = 0, data, count = 4; + + dprintk(MANTIS_DEBUG, 1, "Adapter(%d) Slot(0): Request HIF Mem Read", mantis->num); + mutex_lock(&ca->ca_lock); + hif_addr &= ~MANTIS_GPIF_PCMCIAREG; + hif_addr &= ~MANTIS_GPIF_PCMCIAIOM; + hif_addr |= MANTIS_HIF_STATUS; + hif_addr |= addr; + + mmwrite(hif_addr, MANTIS_GPIF_BRADDR); + mmwrite(count, MANTIS_GPIF_BRBYTES); + udelay(20); + mmwrite(hif_addr | MANTIS_GPIF_HIFRDWRN, MANTIS_GPIF_ADDR); + + if (mantis_hif_sbuf_opdone_wait(ca) != 0) { + dprintk(MANTIS_ERROR, 1, "Adapter(%d) Slot(0): GPIF Smart Buffer operation failed", mantis->num); + mutex_unlock(&ca->ca_lock); + return -EREMOTEIO; + } + data = mmread(MANTIS_GPIF_DIN); + mutex_unlock(&ca->ca_lock); + dprintk(MANTIS_DEBUG, 1, "Mem Read: 0x%02x", data); + return (data >> 24) & 0xff; +} + +int mantis_hif_write_mem(struct mantis_ca *ca, u32 addr, u8 data) +{ + struct mantis_slot *slot = ca->slot; + struct mantis_pci *mantis = ca->ca_priv; + u32 hif_addr = 0; + + dprintk(MANTIS_DEBUG, 1, "Adapter(%d) Slot(0): Request HIF Mem Write", mantis->num); + mutex_lock(&ca->ca_lock); + hif_addr &= ~MANTIS_GPIF_HIFRDWRN; + hif_addr &= ~MANTIS_GPIF_PCMCIAREG; + hif_addr &= ~MANTIS_GPIF_PCMCIAIOM; + hif_addr |= MANTIS_HIF_STATUS; + hif_addr |= addr; + + mmwrite(slot->slave_cfg, MANTIS_GPIF_CFGSLA); /* Slot0 alone for now */ + mmwrite(hif_addr, MANTIS_GPIF_ADDR); + mmwrite(data, MANTIS_GPIF_DOUT); + + if (mantis_hif_write_wait(ca) != 0) { + dprintk(MANTIS_ERROR, 1, "Adapter(%d) Slot(0): HIF Smart Buffer operation failed", mantis->num); + mutex_unlock(&ca->ca_lock); + return -EREMOTEIO; + } + dprintk(MANTIS_DEBUG, 1, "Mem Write: (0x%02x to 0x%02x)", data, addr); + mutex_unlock(&ca->ca_lock); + + return 0; +} + +int mantis_hif_read_iom(struct mantis_ca *ca, u32 addr) +{ + struct mantis_pci *mantis = ca->ca_priv; + u32 data, hif_addr = 0; + + dprintk(MANTIS_DEBUG, 1, "Adapter(%d) Slot(0): Request HIF I/O Read", mantis->num); + mutex_lock(&ca->ca_lock); + hif_addr &= ~MANTIS_GPIF_PCMCIAREG; + hif_addr |= MANTIS_GPIF_PCMCIAIOM; + hif_addr |= MANTIS_HIF_STATUS; + hif_addr |= addr; + + mmwrite(hif_addr, MANTIS_GPIF_BRADDR); + mmwrite(1, MANTIS_GPIF_BRBYTES); + udelay(20); + mmwrite(hif_addr | MANTIS_GPIF_HIFRDWRN, MANTIS_GPIF_ADDR); + + if (mantis_hif_sbuf_opdone_wait(ca) != 0) { + dprintk(MANTIS_ERROR, 1, "Adapter(%d) Slot(0): HIF Smart Buffer operation failed", mantis->num); + mutex_unlock(&ca->ca_lock); + return -EREMOTEIO; + } + data = mmread(MANTIS_GPIF_DIN); + dprintk(MANTIS_DEBUG, 1, "I/O Read: 0x%02x", data); + udelay(50); + mutex_unlock(&ca->ca_lock); + + return (u8) data; +} + +int mantis_hif_write_iom(struct mantis_ca *ca, u32 addr, u8 data) +{ + struct mantis_pci *mantis = ca->ca_priv; + u32 hif_addr = 0; + + dprintk(MANTIS_DEBUG, 1, "Adapter(%d) Slot(0): Request HIF I/O Write", mantis->num); + mutex_lock(&ca->ca_lock); + hif_addr &= ~MANTIS_GPIF_PCMCIAREG; + hif_addr &= ~MANTIS_GPIF_HIFRDWRN; + hif_addr |= MANTIS_GPIF_PCMCIAIOM; + hif_addr |= MANTIS_HIF_STATUS; + hif_addr |= addr; + + mmwrite(hif_addr, MANTIS_GPIF_ADDR); + mmwrite(data, MANTIS_GPIF_DOUT); + + if (mantis_hif_write_wait(ca) != 0) { + dprintk(MANTIS_ERROR, 1, "Adapter(%d) Slot(0): HIF Smart Buffer operation failed", mantis->num); + mutex_unlock(&ca->ca_lock); + return -EREMOTEIO; + } + dprintk(MANTIS_DEBUG, 1, "I/O Write: (0x%02x to 0x%02x)", data, addr); + mutex_unlock(&ca->ca_lock); + udelay(50); + + return 0; +} + +int mantis_hif_init(struct mantis_ca *ca) +{ + struct mantis_slot *slot = ca->slot; + struct mantis_pci *mantis = ca->ca_priv; + u32 irqcfg; + + slot[0].slave_cfg = 0x70773028; + dprintk(MANTIS_ERROR, 1, "Adapter(%d) Initializing Mantis Host Interface", mantis->num); + + mutex_lock(&ca->ca_lock); + irqcfg = mmread(MANTIS_GPIF_IRQCFG); + irqcfg = MANTIS_MASK_BRRDY | + MANTIS_MASK_WRACK | + MANTIS_MASK_EXTIRQ | + MANTIS_MASK_WSTO | + MANTIS_MASK_OTHERR | + MANTIS_MASK_OVFLW; + + mmwrite(irqcfg, MANTIS_GPIF_IRQCFG); + mutex_unlock(&ca->ca_lock); + + return 0; +} + +void mantis_hif_exit(struct mantis_ca *ca) +{ + struct mantis_pci *mantis = ca->ca_priv; + u32 irqcfg; + + dprintk(MANTIS_ERROR, 1, "Adapter(%d) Exiting Mantis Host Interface", mantis->num); + mutex_lock(&ca->ca_lock); + irqcfg = mmread(MANTIS_GPIF_IRQCFG); + irqcfg &= ~MANTIS_MASK_BRRDY; + mmwrite(irqcfg, MANTIS_GPIF_IRQCFG); + mutex_unlock(&ca->ca_lock); +} diff --git a/drivers/media/dvb/mantis/mantis_hif.h b/drivers/media/dvb/mantis/mantis_hif.h new file mode 100644 index 00000000000..9094f9ed236 --- /dev/null +++ b/drivers/media/dvb/mantis/mantis_hif.h @@ -0,0 +1,29 @@ +/* + Mantis PCI bridge driver + + Copyright (C) Manu Abraham (abraham.manu@gmail.com) + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +*/ + +#ifndef __MANTIS_HIF_H +#define __MANTIS_HIF_H + +#define MANTIS_HIF_MEMRD 1 +#define MANTIS_HIF_MEMWR 2 +#define MANTIS_HIF_IOMRD 3 +#define MANTIS_HIF_IOMWR 4 + +#endif /* __MANTIS_HIF_H */ diff --git a/drivers/media/dvb/mantis/mantis_i2c.c b/drivers/media/dvb/mantis/mantis_i2c.c new file mode 100644 index 00000000000..7870bcf9689 --- /dev/null +++ b/drivers/media/dvb/mantis/mantis_i2c.c @@ -0,0 +1,267 @@ +/* + Mantis PCI bridge driver + + Copyright (C) Manu Abraham (abraham.manu@gmail.com) + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +*/ + +#include <asm/io.h> +#include <linux/ioport.h> +#include <linux/pci.h> +#include <linux/i2c.h> + +#include "dmxdev.h" +#include "dvbdev.h" +#include "dvb_demux.h" +#include "dvb_frontend.h" +#include "dvb_net.h" + +#include "mantis_common.h" +#include "mantis_reg.h" +#include "mantis_i2c.h" + +#define TRIALS 10000 + +static int mantis_i2c_read(struct mantis_pci *mantis, const struct i2c_msg *msg) +{ + u32 rxd, i, stat, trials; + + dprintk(MANTIS_INFO, 0, " %s: Address=[0x%02x] <R>[ ", + __func__, msg->addr); + + for (i = 0; i < msg->len; i++) { + rxd = (msg->addr << 25) | (1 << 24) + | MANTIS_I2C_RATE_3 + | MANTIS_I2C_STOP + | MANTIS_I2C_PGMODE; + + if (i == (msg->len - 1)) + rxd &= ~MANTIS_I2C_STOP; + + mmwrite(MANTIS_INT_I2CDONE, MANTIS_INT_STAT); + mmwrite(rxd, MANTIS_I2CDATA_CTL); + + /* wait for xfer completion */ + for (trials = 0; trials < TRIALS; trials++) { + stat = mmread(MANTIS_INT_STAT); + if (stat & MANTIS_INT_I2CDONE) + break; + } + + dprintk(MANTIS_TMG, 0, "I2CDONE: trials=%d\n", trials); + + /* wait for xfer completion */ + for (trials = 0; trials < TRIALS; trials++) { + stat = mmread(MANTIS_INT_STAT); + if (stat & MANTIS_INT_I2CRACK) + break; + } + + dprintk(MANTIS_TMG, 0, "I2CRACK: trials=%d\n", trials); + + rxd = mmread(MANTIS_I2CDATA_CTL); + msg->buf[i] = (u8)((rxd >> 8) & 0xFF); + dprintk(MANTIS_INFO, 0, "%02x ", msg->buf[i]); + } + dprintk(MANTIS_INFO, 0, "]\n"); + + return 0; +} + +static int mantis_i2c_write(struct mantis_pci *mantis, const struct i2c_msg *msg) +{ + int i; + u32 txd = 0, stat, trials; + + dprintk(MANTIS_INFO, 0, " %s: Address=[0x%02x] <W>[ ", + __func__, msg->addr); + + for (i = 0; i < msg->len; i++) { + dprintk(MANTIS_INFO, 0, "%02x ", msg->buf[i]); + txd = (msg->addr << 25) | (msg->buf[i] << 8) + | MANTIS_I2C_RATE_3 + | MANTIS_I2C_STOP + | MANTIS_I2C_PGMODE; + + if (i == (msg->len - 1)) + txd &= ~MANTIS_I2C_STOP; + + mmwrite(MANTIS_INT_I2CDONE, MANTIS_INT_STAT); + mmwrite(txd, MANTIS_I2CDATA_CTL); + + /* wait for xfer completion */ + for (trials = 0; trials < TRIALS; trials++) { + stat = mmread(MANTIS_INT_STAT); + if (stat & MANTIS_INT_I2CDONE) + break; + } + + dprintk(MANTIS_TMG, 0, "I2CDONE: trials=%d\n", trials); + + /* wait for xfer completion */ + for (trials = 0; trials < TRIALS; trials++) { + stat = mmread(MANTIS_INT_STAT); + if (stat & MANTIS_INT_I2CRACK) + break; + } + + dprintk(MANTIS_TMG, 0, "I2CRACK: trials=%d\n", trials); + } + dprintk(MANTIS_INFO, 0, "]\n"); + + return 0; +} + +static int mantis_i2c_xfer(struct i2c_adapter *adapter, struct i2c_msg *msgs, int num) +{ + int ret = 0, i = 0, trials; + u32 stat, data, txd; + struct mantis_pci *mantis; + struct mantis_hwconfig *config; + + mantis = i2c_get_adapdata(adapter); + BUG_ON(!mantis); + config = mantis->hwconfig; + BUG_ON(!config); + + dprintk(MANTIS_DEBUG, 1, "Messages:%d", num); + mutex_lock(&mantis->i2c_lock); + + while (i < num) { + /* Byte MODE */ + if ((config->i2c_mode & MANTIS_BYTE_MODE) && + ((i + 1) < num) && + (msgs[i].len < 2) && + (msgs[i + 1].len < 2) && + (msgs[i + 1].flags & I2C_M_RD)) { + + dprintk(MANTIS_DEBUG, 0, " Byte MODE:\n"); + + /* Read operation */ + txd = msgs[i].addr << 25 | (0x1 << 24) + | (msgs[i].buf[0] << 16) + | MANTIS_I2C_RATE_3; + + mmwrite(txd, MANTIS_I2CDATA_CTL); + /* wait for xfer completion */ + for (trials = 0; trials < TRIALS; trials++) { + stat = mmread(MANTIS_INT_STAT); + if (stat & MANTIS_INT_I2CDONE) + break; + } + + /* check for xfer completion */ + if (stat & MANTIS_INT_I2CDONE) { + /* check xfer was acknowledged */ + if (stat & MANTIS_INT_I2CRACK) { + data = mmread(MANTIS_I2CDATA_CTL); + msgs[i + 1].buf[0] = (data >> 8) & 0xff; + dprintk(MANTIS_DEBUG, 0, " Byte <%d> RXD=0x%02x [%02x]\n", 0x0, data, msgs[i + 1].buf[0]); + } else { + /* I/O error */ + dprintk(MANTIS_ERROR, 1, " I/O error, LINE:%d", __LINE__); + ret = -EIO; + break; + } + } else { + /* I/O error */ + dprintk(MANTIS_ERROR, 1, " I/O error, LINE:%d", __LINE__); + ret = -EIO; + break; + } + i += 2; /* Write/Read operation in one go */ + } + + if (i < num) { + if (msgs[i].flags & I2C_M_RD) + ret = mantis_i2c_read(mantis, &msgs[i]); + else + ret = mantis_i2c_write(mantis, &msgs[i]); + + i++; + if (ret < 0) + goto bail_out; + } + + } + + mutex_unlock(&mantis->i2c_lock); + + return num; + +bail_out: + mutex_unlock(&mantis->i2c_lock); + return ret; +} + +static u32 mantis_i2c_func(struct i2c_adapter *adapter) +{ + return I2C_FUNC_SMBUS_EMUL; +} + +static struct i2c_algorithm mantis_algo = { + .master_xfer = mantis_i2c_xfer, + .functionality = mantis_i2c_func, +}; + +int __devinit mantis_i2c_init(struct mantis_pci *mantis) +{ + u32 intstat, intmask; + struct i2c_adapter *i2c_adapter = &mantis->adapter; + struct pci_dev *pdev = mantis->pdev; + + init_waitqueue_head(&mantis->i2c_wq); + mutex_init(&mantis->i2c_lock); + strncpy(i2c_adapter->name, "Mantis I2C", sizeof(i2c_adapter->name)); + i2c_set_adapdata(i2c_adapter, mantis); + + i2c_adapter->owner = THIS_MODULE; + i2c_adapter->class = I2C_CLASS_TV_DIGITAL; + i2c_adapter->algo = &mantis_algo; + i2c_adapter->algo_data = NULL; + i2c_adapter->timeout = 500; + i2c_adapter->retries = 3; + i2c_adapter->dev.parent = &pdev->dev; + + mantis->i2c_rc = i2c_add_adapter(i2c_adapter); + if (mantis->i2c_rc < 0) + return mantis->i2c_rc; + + dprintk(MANTIS_DEBUG, 1, "Initializing I2C .."); + + intstat = mmread(MANTIS_INT_STAT); + intmask = mmread(MANTIS_INT_MASK); + mmwrite(intstat, MANTIS_INT_STAT); + dprintk(MANTIS_DEBUG, 1, "Disabling I2C interrupt"); + intmask = mmread(MANTIS_INT_MASK); + mmwrite((intmask & ~MANTIS_INT_I2CDONE), MANTIS_INT_MASK); + + return 0; +} +EXPORT_SYMBOL_GPL(mantis_i2c_init); + +int mantis_i2c_exit(struct mantis_pci *mantis) +{ + u32 intmask; + + dprintk(MANTIS_DEBUG, 1, "Disabling I2C interrupt"); + intmask = mmread(MANTIS_INT_MASK); + mmwrite((intmask & ~MANTIS_INT_I2CDONE), MANTIS_INT_MASK); + + dprintk(MANTIS_DEBUG, 1, "Removing I2C adapter"); + return i2c_del_adapter(&mantis->adapter); +} +EXPORT_SYMBOL_GPL(mantis_i2c_exit); diff --git a/drivers/media/dvb/mantis/mantis_i2c.h b/drivers/media/dvb/mantis/mantis_i2c.h new file mode 100644 index 00000000000..1342df2faed --- /dev/null +++ b/drivers/media/dvb/mantis/mantis_i2c.h @@ -0,0 +1,30 @@ +/* + Mantis PCI bridge driver + + Copyright (C) Manu Abraham (abraham.manu@gmail.com) + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +*/ + +#ifndef __MANTIS_I2C_H +#define __MANTIS_I2C_H + +#define I2C_STOP (1 << 0) +#define I2C_READ (1 << 1) + +extern int mantis_i2c_init(struct mantis_pci *mantis); +extern int mantis_i2c_exit(struct mantis_pci *mantis); + +#endif /* __MANTIS_I2C_H */ diff --git a/drivers/media/dvb/mantis/mantis_input.c b/drivers/media/dvb/mantis/mantis_input.c new file mode 100644 index 00000000000..6a9df779441 --- /dev/null +++ b/drivers/media/dvb/mantis/mantis_input.c @@ -0,0 +1,148 @@ +/* + Mantis PCI bridge driver + + Copyright (C) Manu Abraham (abraham.manu@gmail.com) + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +*/ + +#include <linux/input.h> +#include <media/ir-common.h> +#include <linux/pci.h> + +#include "dmxdev.h" +#include "dvbdev.h" +#include "dvb_demux.h" +#include "dvb_frontend.h" +#include "dvb_net.h" + +#include "mantis_common.h" +#include "mantis_reg.h" +#include "mantis_uart.h" + +static struct ir_scancode mantis_ir_table[] = { + { 0x29, KEY_POWER }, + { 0x28, KEY_FAVORITES }, + { 0x30, KEY_TEXT }, + { 0x17, KEY_INFO }, /* Preview */ + { 0x23, KEY_EPG }, + { 0x3b, KEY_F22 }, /* Record List */ + { 0x3c, KEY_1 }, + { 0x3e, KEY_2 }, + { 0x39, KEY_3 }, + { 0x36, KEY_4 }, + { 0x22, KEY_5 }, + { 0x20, KEY_6 }, + { 0x32, KEY_7 }, + { 0x26, KEY_8 }, + { 0x24, KEY_9 }, + { 0x2a, KEY_0 }, + + { 0x33, KEY_CANCEL }, + { 0x2c, KEY_BACK }, + { 0x15, KEY_CLEAR }, + { 0x3f, KEY_TAB }, + { 0x10, KEY_ENTER }, + { 0x14, KEY_UP }, + { 0x0d, KEY_RIGHT }, + { 0x0e, KEY_DOWN }, + { 0x11, KEY_LEFT }, + + { 0x21, KEY_VOLUMEUP }, + { 0x35, KEY_VOLUMEDOWN }, + { 0x3d, KEY_CHANNELDOWN }, + { 0x3a, KEY_CHANNELUP }, + { 0x2e, KEY_RECORD }, + { 0x2b, KEY_PLAY }, + { 0x13, KEY_PAUSE }, + { 0x25, KEY_STOP }, + + { 0x1f, KEY_REWIND }, + { 0x2d, KEY_FASTFORWARD }, + { 0x1e, KEY_PREVIOUS }, /* Replay |< */ + { 0x1d, KEY_NEXT }, /* Skip >| */ + + { 0x0b, KEY_CAMERA }, /* Capture */ + { 0x0f, KEY_LANGUAGE }, /* SAP */ + { 0x18, KEY_MODE }, /* PIP */ + { 0x12, KEY_ZOOM }, /* Full screen */ + { 0x1c, KEY_SUBTITLE }, + { 0x2f, KEY_MUTE }, + { 0x16, KEY_F20 }, /* L/R */ + { 0x38, KEY_F21 }, /* Hibernate */ + + { 0x37, KEY_SWITCHVIDEOMODE }, /* A/V */ + { 0x31, KEY_AGAIN }, /* Recall */ + { 0x1a, KEY_KPPLUS }, /* Zoom+ */ + { 0x19, KEY_KPMINUS }, /* Zoom- */ + { 0x27, KEY_RED }, + { 0x0C, KEY_GREEN }, + { 0x01, KEY_YELLOW }, + { 0x00, KEY_BLUE }, +}; + +struct ir_scancode_table ir_mantis = { + .scan = mantis_ir_table, + .size = ARRAY_SIZE(mantis_ir_table), +}; +EXPORT_SYMBOL_GPL(ir_mantis); + +int mantis_input_init(struct mantis_pci *mantis) +{ + struct input_dev *rc; + struct ir_input_state rc_state; + char name[80], dev[80]; + int err; + + rc = input_allocate_device(); + if (!rc) { + dprintk(MANTIS_ERROR, 1, "Input device allocate failed"); + return -ENOMEM; + } + + sprintf(name, "Mantis %s IR receiver", mantis->hwconfig->model_name); + sprintf(dev, "pci-%s/ir0", pci_name(mantis->pdev)); + + rc->name = name; + rc->phys = dev; + + ir_input_init(rc, &rc_state, IR_TYPE_OTHER); + + rc->id.bustype = BUS_PCI; + rc->id.vendor = mantis->vendor_id; + rc->id.product = mantis->device_id; + rc->id.version = 1; + rc->dev = mantis->pdev->dev; + + err = ir_input_register(rc, &ir_mantis); + if (err) { + dprintk(MANTIS_ERROR, 1, "IR device registration failed, ret = %d", err); + input_free_device(rc); + return -ENODEV; + } + + mantis->rc = rc; + + return 0; +} + +int mantis_exit(struct mantis_pci *mantis) +{ + struct input_dev *rc = mantis->rc; + + ir_input_unregister(rc); + + return 0; +} diff --git a/drivers/media/dvb/mantis/mantis_ioc.c b/drivers/media/dvb/mantis/mantis_ioc.c new file mode 100644 index 00000000000..de148ded52d --- /dev/null +++ b/drivers/media/dvb/mantis/mantis_ioc.c @@ -0,0 +1,130 @@ +/* + Mantis PCI bridge driver + + Copyright (C) Manu Abraham (abraham.manu@gmail.com) + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +*/ + +#include <linux/kernel.h> +#include <linux/i2c.h> + +#include <linux/signal.h> +#include <linux/sched.h> +#include <linux/interrupt.h> + +#include "dmxdev.h" +#include "dvbdev.h" +#include "dvb_demux.h" +#include "dvb_frontend.h" +#include "dvb_net.h" + +#include "mantis_common.h" +#include "mantis_reg.h" +#include "mantis_ioc.h" + +static int read_eeprom_bytes(struct mantis_pci *mantis, u8 reg, u8 *data, u8 length) +{ + struct i2c_adapter *adapter = &mantis->adapter; + int err; + u8 buf = reg; + + struct i2c_msg msg[] = { + { .addr = 0x50, .flags = 0, .buf = &buf, .len = 1 }, + { .addr = 0x50, .flags = I2C_M_RD, .buf = data, .len = length }, + }; + + err = i2c_transfer(adapter, msg, 2); + if (err < 0) { + dprintk(MANTIS_ERROR, 1, "ERROR: i2c read: < err=%i d0=0x%02x d1=0x%02x >", + err, data[0], data[1]); + + return err; + } + + return 0; +} +int mantis_get_mac(struct mantis_pci *mantis) +{ + int err; + u8 mac_addr[6] = {0}; + + err = read_eeprom_bytes(mantis, 0x08, mac_addr, 6); + if (err < 0) { + dprintk(MANTIS_ERROR, 1, "ERROR: Mantis EEPROM read error <%d>", err); + + return err; + } + + dprintk(MANTIS_ERROR, 0, + " MAC Address=[%02x:%02x:%02x:%02x:%02x:%02x]\n", + mac_addr[0], + mac_addr[1], + mac_addr[2], + mac_addr[3], + mac_addr[4], + mac_addr[5]); + + return 0; +} +EXPORT_SYMBOL_GPL(mantis_get_mac); + +/* Turn the given bit on or off. */ +void gpio_set_bits(struct mantis_pci *mantis, u32 bitpos, u8 value) +{ + u32 cur; + + dprintk(MANTIS_DEBUG, 1, "Set Bit <%d> to <%d>", bitpos, value); + cur = mmread(MANTIS_GPIF_ADDR); + if (value) + mantis->gpio_status = cur | (1 << bitpos); + else + mantis->gpio_status = cur & (~(1 << bitpos)); + + dprintk(MANTIS_DEBUG, 1, "GPIO Value <%02x>", mantis->gpio_status); + mmwrite(mantis->gpio_status, MANTIS_GPIF_ADDR); + mmwrite(0x00, MANTIS_GPIF_DOUT); +} +EXPORT_SYMBOL_GPL(gpio_set_bits); + +int mantis_stream_control(struct mantis_pci *mantis, enum mantis_stream_control stream_ctl) +{ + u32 reg; + + reg = mmread(MANTIS_CONTROL); + switch (stream_ctl) { + case STREAM_TO_HIF: + dprintk(MANTIS_DEBUG, 1, "Set stream to HIF"); + reg &= 0xff - MANTIS_BYPASS; + mmwrite(reg, MANTIS_CONTROL); + reg |= MANTIS_BYPASS; + mmwrite(reg, MANTIS_CONTROL); + break; + + case STREAM_TO_CAM: + dprintk(MANTIS_DEBUG, 1, "Set stream to CAM"); + reg |= MANTIS_BYPASS; + mmwrite(reg, MANTIS_CONTROL); + reg &= 0xff - MANTIS_BYPASS; + mmwrite(reg, MANTIS_CONTROL); + break; + default: + dprintk(MANTIS_ERROR, 1, "Unknown MODE <%02x>", stream_ctl); + return -1; + } + + return 0; +} +EXPORT_SYMBOL_GPL(mantis_stream_control); diff --git a/drivers/media/dvb/mantis/mantis_ioc.h b/drivers/media/dvb/mantis/mantis_ioc.h new file mode 100644 index 00000000000..188fe5a8161 --- /dev/null +++ b/drivers/media/dvb/mantis/mantis_ioc.h @@ -0,0 +1,51 @@ +/* + Mantis PCI bridge driver + + Copyright (C) Manu Abraham (abraham.manu@gmail.com) + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +*/ + +#ifndef __MANTIS_IOC_H +#define __MANTIS_IOC_H + +#define GPIF_A00 0x00 +#define GPIF_A01 0x01 +#define GPIF_A02 0x02 +#define GPIF_A03 0x03 +#define GPIF_A04 0x04 +#define GPIF_A05 0x05 +#define GPIF_A06 0x06 +#define GPIF_A07 0x07 +#define GPIF_A08 0x08 +#define GPIF_A09 0x09 +#define GPIF_A10 0x0a +#define GPIF_A11 0x0b + +#define GPIF_A12 0x0c +#define GPIF_A13 0x0d +#define GPIF_A14 0x0e + +enum mantis_stream_control { + STREAM_TO_HIF = 0, + STREAM_TO_CAM +}; + +extern int mantis_get_mac(struct mantis_pci *mantis); +extern void gpio_set_bits(struct mantis_pci *mantis, u32 bitpos, u8 value); + +extern int mantis_stream_control(struct mantis_pci *mantis, enum mantis_stream_control stream_ctl); + +#endif /* __MANTIS_IOC_H */ diff --git a/drivers/media/dvb/mantis/mantis_link.h b/drivers/media/dvb/mantis/mantis_link.h new file mode 100644 index 00000000000..2a814774a00 --- /dev/null +++ b/drivers/media/dvb/mantis/mantis_link.h @@ -0,0 +1,83 @@ +/* + Mantis PCI bridge driver + + Copyright (C) Manu Abraham (abraham.manu@gmail.com) + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +*/ + +#ifndef __MANTIS_LINK_H +#define __MANTIS_LINK_H + +#include <linux/mutex.h> +#include <linux/workqueue.h> +#include "dvb_ca_en50221.h" + +enum mantis_sbuf_status { + MANTIS_SBUF_DATA_AVAIL = 1, + MANTIS_SBUF_DATA_EMPTY = 2, + MANTIS_SBUF_DATA_OVFLW = 3 +}; + +struct mantis_slot { + u32 timeout; + u32 slave_cfg; + u32 bar; +}; + +/* Physical layer */ +enum mantis_slot_state { + MODULE_INSERTED = 3, + MODULE_XTRACTED = 4 +}; + +struct mantis_ca { + struct mantis_slot slot[4]; + + struct work_struct hif_evm_work; + + u32 hif_event; + wait_queue_head_t hif_opdone_wq; + wait_queue_head_t hif_brrdyw_wq; + wait_queue_head_t hif_data_wq; + wait_queue_head_t hif_write_wq; /* HIF Write op */ + + enum mantis_sbuf_status sbuf_status; + + enum mantis_slot_state slot_state; + + void *ca_priv; + + struct dvb_ca_en50221 en50221; + struct mutex ca_lock; +}; + +/* CA */ +extern void mantis_event_cam_plugin(struct mantis_ca *ca); +extern void mantis_event_cam_unplug(struct mantis_ca *ca); +extern int mantis_pcmcia_init(struct mantis_ca *ca); +extern void mantis_pcmcia_exit(struct mantis_ca *ca); +extern int mantis_evmgr_init(struct mantis_ca *ca); +extern void mantis_evmgr_exit(struct mantis_ca *ca); + +/* HIF */ +extern int mantis_hif_init(struct mantis_ca *ca); +extern void mantis_hif_exit(struct mantis_ca *ca); +extern int mantis_hif_read_mem(struct mantis_ca *ca, u32 addr); +extern int mantis_hif_write_mem(struct mantis_ca *ca, u32 addr, u8 data); +extern int mantis_hif_read_iom(struct mantis_ca *ca, u32 addr); +extern int mantis_hif_write_iom(struct mantis_ca *ca, u32 addr, u8 data); + +#endif /* __MANTIS_LINK_H */ diff --git a/drivers/media/dvb/mantis/mantis_pci.c b/drivers/media/dvb/mantis/mantis_pci.c new file mode 100644 index 00000000000..6c7534af6b4 --- /dev/null +++ b/drivers/media/dvb/mantis/mantis_pci.c @@ -0,0 +1,177 @@ +/* + Mantis PCI bridge driver + + Copyright (C) Manu Abraham (abraham.manu@gmail.com) + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +*/ + +#include <linux/module.h> +#include <linux/moduleparam.h> +#include <linux/kernel.h> +#include <asm/io.h> +#include <asm/pgtable.h> +#include <asm/page.h> +#include <linux/kmod.h> +#include <linux/vmalloc.h> +#include <linux/init.h> +#include <linux/device.h> +#include <linux/pci.h> + +#include <asm/irq.h> +#include <linux/signal.h> +#include <linux/sched.h> +#include <linux/interrupt.h> + +#include "dmxdev.h" +#include "dvbdev.h" +#include "dvb_demux.h" +#include "dvb_frontend.h" +#include "dvb_net.h" + +#include <asm/irq.h> +#include <linux/signal.h> +#include <linux/sched.h> +#include <linux/interrupt.h> + +#include "mantis_common.h" +#include "mantis_reg.h" +#include "mantis_pci.h" + +#define DRIVER_NAME "Mantis Core" + +int __devinit mantis_pci_init(struct mantis_pci *mantis) +{ + u8 revision, latency; + struct mantis_hwconfig *config = mantis->hwconfig; + struct pci_dev *pdev = mantis->pdev; + int err, ret = 0; + + dprintk(MANTIS_ERROR, 0, "found a %s PCI %s device on (%02x:%02x.%x),\n", + config->model_name, + config->dev_type, + mantis->pdev->bus->number, + PCI_SLOT(mantis->pdev->devfn), + PCI_FUNC(mantis->pdev->devfn)); + + err = pci_enable_device(pdev); + if (err != 0) { + ret = -ENODEV; + dprintk(MANTIS_ERROR, 1, "ERROR: PCI enable failed <%i>", err); + goto fail0; + } + + err = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32)); + if (err != 0) { + dprintk(MANTIS_ERROR, 1, "ERROR: Unable to obtain 32 bit DMA <%i>", err); + ret = -ENOMEM; + goto fail1; + } + + pci_set_master(pdev); + + if (!request_mem_region(pci_resource_start(pdev, 0), + pci_resource_len(pdev, 0), + DRIVER_NAME)) { + + dprintk(MANTIS_ERROR, 1, "ERROR: BAR0 Request failed !"); + ret = -ENODEV; + goto fail1; + } + + mantis->mmio = ioremap(pci_resource_start(pdev, 0), + pci_resource_len(pdev, 0)); + + if (!mantis->mmio) { + dprintk(MANTIS_ERROR, 1, "ERROR: BAR0 remap failed !"); + ret = -ENODEV; + goto fail2; + } + + pci_read_config_byte(pdev, PCI_LATENCY_TIMER, &latency); + pci_read_config_byte(pdev, PCI_CLASS_REVISION, &revision); + mantis->latency = latency; + mantis->revision = revision; + + dprintk(MANTIS_ERROR, 0, " Mantis Rev %d [%04x:%04x], ", + mantis->revision, + mantis->pdev->subsystem_vendor, + mantis->pdev->subsystem_device); + + dprintk(MANTIS_ERROR, 0, + "irq: %d, latency: %d\n memory: 0x%lx, mmio: 0x%p\n", + mantis->pdev->irq, + mantis->latency, + mantis->mantis_addr, + mantis->mmio); + + err = request_irq(pdev->irq, + config->irq_handler, + IRQF_SHARED, + DRIVER_NAME, + mantis); + + if (err != 0) { + + dprintk(MANTIS_ERROR, 1, "ERROR: IRQ registration failed ! <%d>", err); + ret = -ENODEV; + goto fail3; + } + + pci_set_drvdata(pdev, mantis); + return ret; + + /* Error conditions */ +fail3: + dprintk(MANTIS_ERROR, 1, "ERROR: <%d> I/O unmap", ret); + if (mantis->mmio) + iounmap(mantis->mmio); + +fail2: + dprintk(MANTIS_ERROR, 1, "ERROR: <%d> releasing regions", ret); + release_mem_region(pci_resource_start(pdev, 0), + pci_resource_len(pdev, 0)); + +fail1: + dprintk(MANTIS_ERROR, 1, "ERROR: <%d> disabling device", ret); + pci_disable_device(pdev); + +fail0: + dprintk(MANTIS_ERROR, 1, "ERROR: <%d> exiting", ret); + pci_set_drvdata(pdev, NULL); + return ret; +} +EXPORT_SYMBOL_GPL(mantis_pci_init); + +void mantis_pci_exit(struct mantis_pci *mantis) +{ + struct pci_dev *pdev = mantis->pdev; + + dprintk(MANTIS_NOTICE, 1, " mem: 0x%p", mantis->mmio); + free_irq(pdev->irq, mantis); + if (mantis->mmio) { + iounmap(mantis->mmio); + release_mem_region(pci_resource_start(pdev, 0), + pci_resource_len(pdev, 0)); + } + + pci_disable_device(pdev); + pci_set_drvdata(pdev, NULL); +} +EXPORT_SYMBOL_GPL(mantis_pci_exit); + +MODULE_DESCRIPTION("Mantis PCI DTV bridge driver"); +MODULE_AUTHOR("Manu Abraham"); +MODULE_LICENSE("GPL"); diff --git a/drivers/media/dvb/mantis/mantis_pci.h b/drivers/media/dvb/mantis/mantis_pci.h new file mode 100644 index 00000000000..65f00451908 --- /dev/null +++ b/drivers/media/dvb/mantis/mantis_pci.h @@ -0,0 +1,27 @@ +/* + Mantis PCI bridge driver + + Copyright (C) Manu Abraham (abraham.manu@gmail.com) + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +*/ + +#ifndef __MANTIS_PCI_H +#define __MANTIS_PCI_H + +extern int mantis_pci_init(struct mantis_pci *mantis); +extern void mantis_pci_exit(struct mantis_pci *mantis); + +#endif /* __MANTIS_PCI_H */ diff --git a/drivers/media/dvb/mantis/mantis_pcmcia.c b/drivers/media/dvb/mantis/mantis_pcmcia.c new file mode 100644 index 00000000000..5cb545b913f --- /dev/null +++ b/drivers/media/dvb/mantis/mantis_pcmcia.c @@ -0,0 +1,120 @@ +/* + Mantis PCI bridge driver + + Copyright (C) Manu Abraham (abraham.manu@gmail.com) + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +*/ + +#include <linux/kernel.h> + +#include <linux/signal.h> +#include <linux/sched.h> +#include <linux/interrupt.h> + +#include "dmxdev.h" +#include "dvbdev.h" +#include "dvb_demux.h" +#include "dvb_frontend.h" +#include "dvb_net.h" + +#include "mantis_common.h" +#include "mantis_link.h" /* temporary due to physical layer stuff */ +#include "mantis_reg.h" + +/* + * If Slot state is already PLUG_IN event and we are called + * again, definitely it is jitter alone + */ +void mantis_event_cam_plugin(struct mantis_ca *ca) +{ + struct mantis_pci *mantis = ca->ca_priv; + + u32 gpif_irqcfg; + + if (ca->slot_state == MODULE_XTRACTED) { + dprintk(MANTIS_DEBUG, 1, "Event: CAM Plugged IN: Adapter(%d) Slot(0)", mantis->num); + udelay(50); + mmwrite(0xda000000, MANTIS_CARD_RESET); + gpif_irqcfg = mmread(MANTIS_GPIF_IRQCFG); + gpif_irqcfg |= MANTIS_MASK_PLUGOUT; + gpif_irqcfg &= ~MANTIS_MASK_PLUGIN; + mmwrite(gpif_irqcfg, MANTIS_GPIF_IRQCFG); + udelay(500); + ca->slot_state = MODULE_INSERTED; + } + udelay(100); +} + +/* + * If Slot state is already UN_PLUG event and we are called + * again, definitely it is jitter alone + */ +void mantis_event_cam_unplug(struct mantis_ca *ca) +{ + struct mantis_pci *mantis = ca->ca_priv; + + u32 gpif_irqcfg; + + if (ca->slot_state == MODULE_INSERTED) { + dprintk(MANTIS_DEBUG, 1, "Event: CAM Unplugged: Adapter(%d) Slot(0)", mantis->num); + udelay(50); + mmwrite(0x00da0000, MANTIS_CARD_RESET); + gpif_irqcfg = mmread(MANTIS_GPIF_IRQCFG); + gpif_irqcfg |= MANTIS_MASK_PLUGIN; + gpif_irqcfg &= ~MANTIS_MASK_PLUGOUT; + mmwrite(gpif_irqcfg, MANTIS_GPIF_IRQCFG); + udelay(500); + ca->slot_state = MODULE_XTRACTED; + } + udelay(100); +} + +int mantis_pcmcia_init(struct mantis_ca *ca) +{ + struct mantis_pci *mantis = ca->ca_priv; + + u32 gpif_stat, card_stat; + + mmwrite(mmread(MANTIS_INT_MASK) | MANTIS_INT_IRQ0, MANTIS_INT_MASK); + gpif_stat = mmread(MANTIS_GPIF_STATUS); + card_stat = mmread(MANTIS_GPIF_IRQCFG); + + if (gpif_stat & MANTIS_GPIF_DETSTAT) { + dprintk(MANTIS_DEBUG, 1, "CAM found on Adapter(%d) Slot(0)", mantis->num); + mmwrite(card_stat | MANTIS_MASK_PLUGOUT, MANTIS_GPIF_IRQCFG); + ca->slot_state = MODULE_INSERTED; + dvb_ca_en50221_camchange_irq(&ca->en50221, + 0, + DVB_CA_EN50221_CAMCHANGE_INSERTED); + } else { + dprintk(MANTIS_DEBUG, 1, "Empty Slot on Adapter(%d) Slot(0)", mantis->num); + mmwrite(card_stat | MANTIS_MASK_PLUGIN, MANTIS_GPIF_IRQCFG); + ca->slot_state = MODULE_XTRACTED; + dvb_ca_en50221_camchange_irq(&ca->en50221, + 0, + DVB_CA_EN50221_CAMCHANGE_REMOVED); + } + + return 0; +} + +void mantis_pcmcia_exit(struct mantis_ca *ca) +{ + struct mantis_pci *mantis = ca->ca_priv; + + mmwrite(mmread(MANTIS_GPIF_STATUS) & (~MANTIS_CARD_PLUGOUT | ~MANTIS_CARD_PLUGIN), MANTIS_GPIF_STATUS); + mmwrite(mmread(MANTIS_INT_MASK) & ~MANTIS_INT_IRQ0, MANTIS_INT_MASK); +} diff --git a/drivers/media/dvb/mantis/mantis_reg.h b/drivers/media/dvb/mantis/mantis_reg.h new file mode 100644 index 00000000000..7761f9dc7fe --- /dev/null +++ b/drivers/media/dvb/mantis/mantis_reg.h @@ -0,0 +1,197 @@ +/* + Mantis PCI bridge driver + + Copyright (C) Manu Abraham (abraham.manu@gmail.com) + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +*/ + +#ifndef __MANTIS_REG_H +#define __MANTIS_REG_H + +/* Interrupts */ +#define MANTIS_INT_STAT 0x00 +#define MANTIS_INT_MASK 0x04 + +#define MANTIS_INT_RISCSTAT (0x0f << 28) +#define MANTIS_INT_RISCEN (0x01 << 27) +#define MANTIS_INT_I2CRACK (0x01 << 26) + +/* #define MANTIS_INT_GPIF (0xff << 12) */ + +#define MANTIS_INT_PCMCIA7 (0x01 << 19) +#define MANTIS_INT_PCMCIA6 (0x01 << 18) +#define MANTIS_INT_PCMCIA5 (0x01 << 17) +#define MANTIS_INT_PCMCIA4 (0x01 << 16) +#define MANTIS_INT_PCMCIA3 (0x01 << 15) +#define MANTIS_INT_PCMCIA2 (0x01 << 14) +#define MANTIS_INT_PCMCIA1 (0x01 << 13) +#define MANTIS_INT_PCMCIA0 (0x01 << 12) +#define MANTIS_INT_IRQ1 (0x01 << 11) +#define MANTIS_INT_IRQ0 (0x01 << 10) +#define MANTIS_INT_OCERR (0x01 << 8) +#define MANTIS_INT_PABORT (0x01 << 7) +#define MANTIS_INT_RIPERR (0x01 << 6) +#define MANTIS_INT_PPERR (0x01 << 5) +#define MANTIS_INT_FTRGT (0x01 << 3) +#define MANTIS_INT_RISCI (0x01 << 1) +#define MANTIS_INT_I2CDONE (0x01 << 0) + +/* DMA */ +#define MANTIS_DMA_CTL 0x08 +#define MANTIS_GPIF_RD (0xff << 24) +#define MANTIS_GPIF_WR (0xff << 16) +#define MANTIS_CPU_DO (0x01 << 10) +#define MANTIS_DRV_DO (0x01 << 9) +#define MANTIS_I2C_RD (0x01 << 7) +#define MANTIS_I2C_WR (0x01 << 6) +#define MANTIS_DCAP_MODE (0x01 << 5) +#define MANTIS_FIFO_TP_4 (0x00 << 3) +#define MANTIS_FIFO_TP_8 (0x01 << 3) +#define MANTIS_FIFO_TP_16 (0x02 << 3) +#define MANTIS_FIFO_EN (0x01 << 2) +#define MANTIS_DCAP_EN (0x01 << 1) +#define MANTIS_RISC_EN (0x01 << 0) + +/* DEBUG */ +#define MANTIS_DEBUGREG 0x0c +#define MANTIS_DATINV (0x0e << 7) +#define MANTIS_TOP_DEBUGSEL (0x07 << 4) +#define MANTIS_PCMCIA_DEBUGSEL (0x0f << 0) + +#define MANTIS_RISC_START 0x10 +#define MANTIS_RISC_PC 0x14 + +/* I2C */ +#define MANTIS_I2CDATA_CTL 0x18 +#define MANTIS_I2C_RATE_1 (0x00 << 6) +#define MANTIS_I2C_RATE_2 (0x01 << 6) +#define MANTIS_I2C_RATE_3 (0x02 << 6) +#define MANTIS_I2C_RATE_4 (0x03 << 6) +#define MANTIS_I2C_STOP (0x01 << 5) +#define MANTIS_I2C_PGMODE (0x01 << 3) + +/* DATA */ +#define MANTIS_CMD_DATA_R1 0x20 +#define MANTIS_CMD_DATA_3 (0xff << 24) +#define MANTIS_CMD_DATA_2 (0xff << 16) +#define MANTIS_CMD_DATA_1 (0xff << 8) +#define MANTIS_CMD_DATA_0 (0xff << 0) + +#define MANTIS_CMD_DATA_R2 0x24 +#define MANTIS_CMD_DATA_7 (0xff << 24) +#define MANTIS_CMD_DATA_6 (0xff << 16) +#define MANTIS_CMD_DATA_5 (0xff << 8) +#define MANTIS_CMD_DATA_4 (0xff << 0) + +#define MANTIS_CONTROL 0x28 +#define MANTIS_DET (0x01 << 7) +#define MANTIS_DAT_CF_EN (0x01 << 6) +#define MANTIS_ACS (0x03 << 4) +#define MANTIS_VCCEN (0x01 << 3) +#define MANTIS_BYPASS (0x01 << 2) +#define MANTIS_MRST (0x01 << 1) +#define MANTIS_CRST_INT (0x01 << 0) + +#define MANTIS_GPIF_CFGSLA 0x84 +#define MANTIS_GPIF_WAITSMPL (0x07 << 28) +#define MANTIS_GPIF_BYTEADDRSUB (0x01 << 25) +#define MANTIS_GPIF_WAITPOL (0x01 << 24) +#define MANTIS_GPIF_NCDELAY (0x07 << 20) +#define MANTIS_GPIF_RW2CSDELAY (0x07 << 16) +#define MANTIS_GPIF_SLFTIMEDMODE (0x01 << 15) +#define MANTIS_GPIF_SLFTIMEDDELY (0x7f << 8) +#define MANTIS_GPIF_DEVTYPE (0x07 << 4) +#define MANTIS_GPIF_BIGENDIAN (0x01 << 3) +#define MANTIS_GPIF_FETCHCMD (0x03 << 1) +#define MANTIS_GPIF_HWORDDEV (0x01 << 0) + +#define MANTIS_GPIF_WSTOPER 0x90 +#define MANTIS_GPIF_WSTOPERWREN3 (0x01 << 31) +#define MANTIS_GPIF_PARBOOTN (0x01 << 29) +#define MANTIS_GPIF_WSTOPERSLID3 (0x1f << 24) +#define MANTIS_GPIF_WSTOPERWREN2 (0x01 << 23) +#define MANTIS_GPIF_WSTOPERSLID2 (0x1f << 16) +#define MANTIS_GPIF_WSTOPERWREN1 (0x01 << 15) +#define MANTIS_GPIF_WSTOPERSLID1 (0x1f << 8) +#define MANTIS_GPIF_WSTOPERWREN0 (0x01 << 7) +#define MANTIS_GPIF_WSTOPERSLID0 (0x1f << 0) + +#define MANTIS_GPIF_CS2RW 0x94 +#define MANTIS_GPIF_CS2RWWREN3 (0x01 << 31) +#define MANTIS_GPIF_CS2RWDELY3 (0x3f << 24) +#define MANTIS_GPIF_CS2RWWREN2 (0x01 << 23) +#define MANTIS_GPIF_CS2RWDELY2 (0x3f << 16) +#define MANTIS_GPIF_CS2RWWREN1 (0x01 << 15) +#define MANTIS_GPIF_CS2RWDELY1 (0x3f << 8) +#define MANTIS_GPIF_CS2RWWREN0 (0x01 << 7) +#define MANTIS_GPIF_CS2RWDELY0 (0x3f << 0) + +#define MANTIS_GPIF_IRQCFG 0x98 +#define MANTIS_GPIF_IRQPOL (0x01 << 8) +#define MANTIS_MASK_WRACK (0x01 << 7) +#define MANTIS_MASK_BRRDY (0x01 << 6) +#define MANTIS_MASK_OVFLW (0x01 << 5) +#define MANTIS_MASK_OTHERR (0x01 << 4) +#define MANTIS_MASK_WSTO (0x01 << 3) +#define MANTIS_MASK_EXTIRQ (0x01 << 2) +#define MANTIS_MASK_PLUGIN (0x01 << 1) +#define MANTIS_MASK_PLUGOUT (0x01 << 0) + +#define MANTIS_GPIF_STATUS 0x9c +#define MANTIS_SBUF_KILLOP (0x01 << 15) +#define MANTIS_SBUF_OPDONE (0x01 << 14) +#define MANTIS_SBUF_EMPTY (0x01 << 13) +#define MANTIS_GPIF_DETSTAT (0x01 << 9) +#define MANTIS_GPIF_INTSTAT (0x01 << 8) +#define MANTIS_GPIF_WRACK (0x01 << 7) +#define MANTIS_GPIF_BRRDY (0x01 << 6) +#define MANTIS_SBUF_OVFLW (0x01 << 5) +#define MANTIS_GPIF_OTHERR (0x01 << 4) +#define MANTIS_SBUF_WSTO (0x01 << 3) +#define MANTIS_GPIF_EXTIRQ (0x01 << 2) +#define MANTIS_CARD_PLUGIN (0x01 << 1) +#define MANTIS_CARD_PLUGOUT (0x01 << 0) + +#define MANTIS_GPIF_BRADDR 0xa0 +#define MANTIS_GPIF_PCMCIAREG (0x01 << 27) +#define MANTIS_GPIF_PCMCIAIOM (0x01 << 26) +#define MANTIS_GPIF_BR_ADDR (0xfffffff << 0) + +#define MANTIS_GPIF_BRBYTES 0xa4 +#define MANTIS_GPIF_BRCNT (0xfff << 0) + +#define MANTIS_PCMCIA_RESET 0xa8 +#define MANTIS_PCMCIA_RSTVAL (0xff << 0) + +#define MANTIS_CARD_RESET 0xac + +#define MANTIS_GPIF_ADDR 0xb0 +#define MANTIS_GPIF_HIFRDWRN (0x01 << 31) +#define MANTIS_GPIF_PCMCIAREG (0x01 << 27) +#define MANTIS_GPIF_PCMCIAIOM (0x01 << 26) +#define MANTIS_GPIF_HIFADDR (0xfffffff << 0) + +#define MANTIS_GPIF_DOUT 0xb4 +#define MANTIS_GPIF_HIFDOUT (0xfffffff << 0) + +#define MANTIS_GPIF_DIN 0xb8 +#define MANTIS_GPIF_HIFDIN (0xfffffff << 0) + +#define MANTIS_GPIF_SPARE 0xbc +#define MANTIS_GPIF_LOGICRD (0xffff << 16) +#define MANTIS_GPIF_LOGICRW (0xffff << 0) + +#endif /* __MANTIS_REG_H */ diff --git a/drivers/media/dvb/mantis/mantis_uart.c b/drivers/media/dvb/mantis/mantis_uart.c new file mode 100644 index 00000000000..7d2f2398fa8 --- /dev/null +++ b/drivers/media/dvb/mantis/mantis_uart.c @@ -0,0 +1,186 @@ +/* + Mantis PCI bridge driver + + Copyright (C) Manu Abraham (abraham.manu@gmail.com) + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +*/ + +#include <linux/kernel.h> +#include <linux/spinlock.h> + +#include <linux/signal.h> +#include <linux/sched.h> +#include <linux/interrupt.h> + +#include "dmxdev.h" +#include "dvbdev.h" +#include "dvb_demux.h" +#include "dvb_frontend.h" +#include "dvb_net.h" + +#include "mantis_common.h" +#include "mantis_reg.h" +#include "mantis_uart.h" + +struct mantis_uart_params { + enum mantis_baud baud_rate; + enum mantis_parity parity; +}; + +static struct { + char string[7]; +} rates[5] = { + { "9600" }, + { "19200" }, + { "38400" }, + { "57600" }, + { "115200" } +}; + +static struct { + char string[5]; +} parity[3] = { + { "NONE" }, + { "ODD" }, + { "EVEN" } +}; + +#define UART_MAX_BUF 16 + +int mantis_uart_read(struct mantis_pci *mantis, u8 *data) +{ + struct mantis_hwconfig *config = mantis->hwconfig; + u32 stat = 0, i; + + /* get data */ + for (i = 0; i < (config->bytes + 1); i++) { + + stat = mmread(MANTIS_UART_STAT); + + if (stat & MANTIS_UART_RXFIFO_FULL) { + dprintk(MANTIS_ERROR, 1, "RX Fifo FULL"); + } + data[i] = mmread(MANTIS_UART_RXD) & 0x3f; + + dprintk(MANTIS_DEBUG, 1, "Reading ... <%02x>", data[i] & 0x3f); + + if (data[i] & (1 << 7)) { + dprintk(MANTIS_ERROR, 1, "UART framing error"); + return -EINVAL; + } + if (data[i] & (1 << 6)) { + dprintk(MANTIS_ERROR, 1, "UART parity error"); + return -EINVAL; + } + } + + return 0; +} + +static void mantis_uart_work(struct work_struct *work) +{ + struct mantis_pci *mantis = container_of(work, struct mantis_pci, uart_work); + struct mantis_hwconfig *config = mantis->hwconfig; + u8 buf[16]; + int i; + + mantis_uart_read(mantis, buf); + + for (i = 0; i < (config->bytes + 1); i++) + dprintk(MANTIS_INFO, 1, "UART BUF:%d <%02x> ", i, buf[i]); + + dprintk(MANTIS_DEBUG, 0, "\n"); +} + +static int mantis_uart_setup(struct mantis_pci *mantis, + struct mantis_uart_params *params) +{ + u32 reg; + + mmwrite((mmread(MANTIS_UART_CTL) | (params->parity & 0x3)), MANTIS_UART_CTL); + + reg = mmread(MANTIS_UART_BAUD); + + switch (params->baud_rate) { + case MANTIS_BAUD_9600: + reg |= 0xd8; + break; + case MANTIS_BAUD_19200: + reg |= 0x6c; + break; + case MANTIS_BAUD_38400: + reg |= 0x36; + break; + case MANTIS_BAUD_57600: + reg |= 0x23; + break; + case MANTIS_BAUD_115200: + reg |= 0x11; + break; + default: + return -EINVAL; + } + + mmwrite(reg, MANTIS_UART_BAUD); + + return 0; +} + +int mantis_uart_init(struct mantis_pci *mantis) +{ + struct mantis_hwconfig *config = mantis->hwconfig; + struct mantis_uart_params params; + + /* default parity: */ + params.baud_rate = config->baud_rate; + params.parity = config->parity; + dprintk(MANTIS_INFO, 1, "Initializing UART @ %sbps parity:%s", + rates[params.baud_rate].string, + parity[params.parity].string); + + init_waitqueue_head(&mantis->uart_wq); + spin_lock_init(&mantis->uart_lock); + + INIT_WORK(&mantis->uart_work, mantis_uart_work); + + /* disable interrupt */ + mmwrite(mmread(MANTIS_UART_CTL) & 0xffef, MANTIS_UART_CTL); + + mantis_uart_setup(mantis, ¶ms); + + /* default 1 byte */ + mmwrite((mmread(MANTIS_UART_BAUD) | (config->bytes << 8)), MANTIS_UART_BAUD); + + /* flush buffer */ + mmwrite((mmread(MANTIS_UART_CTL) | MANTIS_UART_RXFLUSH), MANTIS_UART_CTL); + + /* enable interrupt */ + mmwrite(mmread(MANTIS_INT_MASK) | 0x800, MANTIS_INT_MASK); + mmwrite(mmread(MANTIS_UART_CTL) | MANTIS_UART_RXINT, MANTIS_UART_CTL); + + schedule_work(&mantis->uart_work); + dprintk(MANTIS_DEBUG, 1, "UART succesfully initialized"); + + return 0; +} +EXPORT_SYMBOL_GPL(mantis_uart_init); + +void mantis_uart_exit(struct mantis_pci *mantis) +{ + /* disable interrupt */ + mmwrite(mmread(MANTIS_UART_CTL) & 0xffef, MANTIS_UART_CTL); +} +EXPORT_SYMBOL_GPL(mantis_uart_exit); diff --git a/drivers/media/dvb/mantis/mantis_uart.h b/drivers/media/dvb/mantis/mantis_uart.h new file mode 100644 index 00000000000..ffb62a0a5a1 --- /dev/null +++ b/drivers/media/dvb/mantis/mantis_uart.h @@ -0,0 +1,58 @@ +/* + Mantis PCI bridge driver + + Copyright (C) Manu Abraham (abraham.manu@gmail.com) + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +*/ + +#ifndef __MANTIS_UART_H +#define __MANTIS_UART_H + +#define MANTIS_UART_CTL 0xe0 +#define MANTIS_UART_RXINT (1 << 4) +#define MANTIS_UART_RXFLUSH (1 << 2) + +#define MANTIS_UART_RXD 0xe8 +#define MANTIS_UART_BAUD 0xec + +#define MANTIS_UART_STAT 0xf0 +#define MANTIS_UART_RXFIFO_DATA (1 << 7) +#define MANTIS_UART_RXFIFO_EMPTY (1 << 6) +#define MANTIS_UART_RXFIFO_FULL (1 << 3) +#define MANTIS_UART_FRAME_ERR (1 << 2) +#define MANTIS_UART_PARITY_ERR (1 << 1) +#define MANTIS_UART_RXTHRESH_INT (1 << 0) + +enum mantis_baud { + MANTIS_BAUD_9600 = 0, + MANTIS_BAUD_19200, + MANTIS_BAUD_38400, + MANTIS_BAUD_57600, + MANTIS_BAUD_115200 +}; + +enum mantis_parity { + MANTIS_PARITY_NONE = 0, + MANTIS_PARITY_EVEN, + MANTIS_PARITY_ODD, +}; + +struct mantis_pci; + +extern int mantis_uart_init(struct mantis_pci *mantis); +extern void mantis_uart_exit(struct mantis_pci *mantis); + +#endif /* __MANTIS_UART_H */ diff --git a/drivers/media/dvb/mantis/mantis_vp1033.c b/drivers/media/dvb/mantis/mantis_vp1033.c new file mode 100644 index 00000000000..4a723bda003 --- /dev/null +++ b/drivers/media/dvb/mantis/mantis_vp1033.c @@ -0,0 +1,212 @@ +/* + Mantis VP-1033 driver + + Copyright (C) Manu Abraham (abraham.manu@gmail.com) + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +*/ + +#include <linux/signal.h> +#include <linux/sched.h> +#include <linux/interrupt.h> + +#include "dmxdev.h" +#include "dvbdev.h" +#include "dvb_demux.h" +#include "dvb_frontend.h" +#include "dvb_net.h" + +#include "stv0299.h" +#include "mantis_common.h" +#include "mantis_ioc.h" +#include "mantis_dvb.h" +#include "mantis_vp1033.h" +#include "mantis_reg.h" + +u8 lgtdqcs001f_inittab[] = { + 0x01, 0x15, + 0x02, 0x00, + 0x03, 0x00, + 0x04, 0x2a, + 0x05, 0x85, + 0x06, 0x02, + 0x07, 0x00, + 0x08, 0x00, + 0x0c, 0x01, + 0x0d, 0x81, + 0x0e, 0x44, + 0x0f, 0x94, + 0x10, 0x3c, + 0x11, 0x84, + 0x12, 0xb9, + 0x13, 0xb5, + 0x14, 0x4f, + 0x15, 0xc9, + 0x16, 0x80, + 0x17, 0x36, + 0x18, 0xfb, + 0x19, 0xcf, + 0x1a, 0xbc, + 0x1c, 0x2b, + 0x1d, 0x27, + 0x1e, 0x00, + 0x1f, 0x0b, + 0x20, 0xa1, + 0x21, 0x60, + 0x22, 0x00, + 0x23, 0x00, + 0x28, 0x00, + 0x29, 0x28, + 0x2a, 0x14, + 0x2b, 0x0f, + 0x2c, 0x09, + 0x2d, 0x05, + 0x31, 0x1f, + 0x32, 0x19, + 0x33, 0xfc, + 0x34, 0x13, + 0xff, 0xff, +}; + +#define MANTIS_MODEL_NAME "VP-1033" +#define MANTIS_DEV_TYPE "DVB-S/DSS" + +int lgtdqcs001f_tuner_set(struct dvb_frontend *fe, + struct dvb_frontend_parameters *params) +{ + struct mantis_pci *mantis = fe->dvb->priv; + struct i2c_adapter *adapter = &mantis->adapter; + + u8 buf[4]; + u32 div; + + + struct i2c_msg msg = {.addr = 0x61, .flags = 0, .buf = buf, .len = sizeof(buf)}; + + div = params->frequency / 250; + + buf[0] = (div >> 8) & 0x7f; + buf[1] = div & 0xff; + buf[2] = 0x83; + buf[3] = 0xc0; + + if (params->frequency < 1531000) + buf[3] |= 0x04; + else + buf[3] &= ~0x04; + if (i2c_transfer(adapter, &msg, 1) < 0) { + dprintk(MANTIS_ERROR, 1, "Write: I2C Transfer failed"); + return -EIO; + } + msleep_interruptible(100); + + return 0; +} + +int lgtdqcs001f_set_symbol_rate(struct dvb_frontend *fe, + u32 srate, u32 ratio) +{ + u8 aclk = 0; + u8 bclk = 0; + + if (srate < 1500000) { + aclk = 0xb7; + bclk = 0x47; + } else if (srate < 3000000) { + aclk = 0xb7; + bclk = 0x4b; + } else if (srate < 7000000) { + aclk = 0xb7; + bclk = 0x4f; + } else if (srate < 14000000) { + aclk = 0xb7; + bclk = 0x53; + } else if (srate < 30000000) { + aclk = 0xb6; + bclk = 0x53; + } else if (srate < 45000000) { + aclk = 0xb4; + bclk = 0x51; + } + stv0299_writereg(fe, 0x13, aclk); + stv0299_writereg(fe, 0x14, bclk); + + stv0299_writereg(fe, 0x1f, (ratio >> 16) & 0xff); + stv0299_writereg(fe, 0x20, (ratio >> 8) & 0xff); + stv0299_writereg(fe, 0x21, ratio & 0xf0); + + return 0; +} + +struct stv0299_config lgtdqcs001f_config = { + .demod_address = 0x68, + .inittab = lgtdqcs001f_inittab, + .mclk = 88000000UL, + .invert = 0, + .skip_reinit = 0, + .volt13_op0_op1 = STV0299_VOLT13_OP0, + .min_delay_ms = 100, + .set_symbol_rate = lgtdqcs001f_set_symbol_rate, +}; + +static int vp1033_frontend_init(struct mantis_pci *mantis, struct dvb_frontend *fe) +{ + struct i2c_adapter *adapter = &mantis->adapter; + + int err = 0; + + err = mantis_frontend_power(mantis, POWER_ON); + if (err == 0) { + mantis_frontend_soft_reset(mantis); + msleep(250); + + dprintk(MANTIS_ERROR, 1, "Probing for STV0299 (DVB-S)"); + fe = stv0299_attach(&lgtdqcs001f_config, adapter); + + if (fe) { + fe->ops.tuner_ops.set_params = lgtdqcs001f_tuner_set; + dprintk(MANTIS_ERROR, 1, "found STV0299 DVB-S frontend @ 0x%02x", + lgtdqcs001f_config.demod_address); + + dprintk(MANTIS_ERROR, 1, "Mantis DVB-S STV0299 frontend attach success"); + } else { + return -1; + } + } else { + dprintk(MANTIS_ERROR, 1, "Frontend on <%s> POWER ON failed! <%d>", + adapter->name, + err); + + return -EIO; + } + mantis->fe = fe; + dprintk(MANTIS_ERROR, 1, "Done!"); + + return 0; +} + +struct mantis_hwconfig vp1033_config = { + .model_name = MANTIS_MODEL_NAME, + .dev_type = MANTIS_DEV_TYPE, + .ts_size = MANTIS_TS_204, + + .baud_rate = MANTIS_BAUD_9600, + .parity = MANTIS_PARITY_NONE, + .bytes = 0, + + .frontend_init = vp1033_frontend_init, + .power = GPIF_A12, + .reset = GPIF_A13, +}; diff --git a/drivers/media/dvb/mantis/mantis_vp1033.h b/drivers/media/dvb/mantis/mantis_vp1033.h new file mode 100644 index 00000000000..7daaa1bf127 --- /dev/null +++ b/drivers/media/dvb/mantis/mantis_vp1033.h @@ -0,0 +1,30 @@ +/* + Mantis VP-1033 driver + + Copyright (C) Manu Abraham (abraham.manu@gmail.com) + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +*/ + +#ifndef __MANTIS_VP1033_H +#define __MANTIS_VP1033_H + +#include "mantis_common.h" + +#define MANTIS_VP_1033_DVB_S 0x0016 + +extern struct mantis_hwconfig vp1033_config; + +#endif /* __MANTIS_VP1033_H */ diff --git a/drivers/media/dvb/mantis/mantis_vp1034.c b/drivers/media/dvb/mantis/mantis_vp1034.c new file mode 100644 index 00000000000..8e6ae558ee5 --- /dev/null +++ b/drivers/media/dvb/mantis/mantis_vp1034.c @@ -0,0 +1,119 @@ +/* + Mantis VP-1034 driver + + Copyright (C) Manu Abraham (abraham.manu@gmail.com) + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +*/ + +#include <linux/signal.h> +#include <linux/sched.h> +#include <linux/interrupt.h> + +#include "dmxdev.h" +#include "dvbdev.h" +#include "dvb_demux.h" +#include "dvb_frontend.h" +#include "dvb_net.h" + +#include "mb86a16.h" +#include "mantis_common.h" +#include "mantis_ioc.h" +#include "mantis_dvb.h" +#include "mantis_vp1034.h" +#include "mantis_reg.h" + +struct mb86a16_config vp1034_mb86a16_config = { + .demod_address = 0x08, + .set_voltage = vp1034_set_voltage, +}; + +#define MANTIS_MODEL_NAME "VP-1034" +#define MANTIS_DEV_TYPE "DVB-S/DSS" + +int vp1034_set_voltage(struct dvb_frontend *fe, fe_sec_voltage_t voltage) +{ + struct mantis_pci *mantis = fe->dvb->priv; + + switch (voltage) { + case SEC_VOLTAGE_13: + dprintk(MANTIS_ERROR, 1, "Polarization=[13V]"); + gpio_set_bits(mantis, 13, 1); + gpio_set_bits(mantis, 14, 0); + break; + case SEC_VOLTAGE_18: + dprintk(MANTIS_ERROR, 1, "Polarization=[18V]"); + gpio_set_bits(mantis, 13, 1); + gpio_set_bits(mantis, 14, 1); + break; + case SEC_VOLTAGE_OFF: + dprintk(MANTIS_ERROR, 1, "Frontend (dummy) POWERDOWN"); + break; + default: + dprintk(MANTIS_ERROR, 1, "Invalid = (%d)", (u32) voltage); + return -EINVAL; + } + mmwrite(0x00, MANTIS_GPIF_DOUT); + + return 0; +} + +static int vp1034_frontend_init(struct mantis_pci *mantis, struct dvb_frontend *fe) +{ + struct i2c_adapter *adapter = &mantis->adapter; + + int err = 0; + + err = mantis_frontend_power(mantis, POWER_ON); + if (err == 0) { + mantis_frontend_soft_reset(mantis); + msleep(250); + + dprintk(MANTIS_ERROR, 1, "Probing for MB86A16 (DVB-S/DSS)"); + fe = mb86a16_attach(&vp1034_mb86a16_config, adapter); + if (fe) { + dprintk(MANTIS_ERROR, 1, + "found MB86A16 DVB-S/DSS frontend @0x%02x", + vp1034_mb86a16_config.demod_address); + + } else { + return -1; + } + } else { + dprintk(MANTIS_ERROR, 1, "Frontend on <%s> POWER ON failed! <%d>", + adapter->name, + err); + + return -EIO; + } + mantis->fe = fe; + dprintk(MANTIS_ERROR, 1, "Done!"); + + return 0; +} + +struct mantis_hwconfig vp1034_config = { + .model_name = MANTIS_MODEL_NAME, + .dev_type = MANTIS_DEV_TYPE, + .ts_size = MANTIS_TS_204, + + .baud_rate = MANTIS_BAUD_9600, + .parity = MANTIS_PARITY_NONE, + .bytes = 0, + + .frontend_init = vp1034_frontend_init, + .power = GPIF_A12, + .reset = GPIF_A13, +}; diff --git a/drivers/media/dvb/mantis/mantis_vp1034.h b/drivers/media/dvb/mantis/mantis_vp1034.h new file mode 100644 index 00000000000..323f38ef8e3 --- /dev/null +++ b/drivers/media/dvb/mantis/mantis_vp1034.h @@ -0,0 +1,33 @@ +/* + Mantis VP-1034 driver + + Copyright (C) Manu Abraham (abraham.manu@gmail.com) + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +*/ + +#ifndef __MANTIS_VP1034_H +#define __MANTIS_VP1034_H + +#include "dvb_frontend.h" +#include "mantis_common.h" + + +#define MANTIS_VP_1034_DVB_S 0x0014 + +extern struct mantis_hwconfig vp1034_config; +extern int vp1034_set_voltage(struct dvb_frontend *fe, fe_sec_voltage_t voltage); + +#endif /* __MANTIS_VP1034_H */ diff --git a/drivers/media/dvb/mantis/mantis_vp1041.c b/drivers/media/dvb/mantis/mantis_vp1041.c new file mode 100644 index 00000000000..515346dd31d --- /dev/null +++ b/drivers/media/dvb/mantis/mantis_vp1041.c @@ -0,0 +1,358 @@ +/* + Mantis VP-1041 driver + + Copyright (C) Manu Abraham (abraham.manu@gmail.com) + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +*/ + +#include <linux/signal.h> +#include <linux/sched.h> +#include <linux/interrupt.h> + +#include "dmxdev.h" +#include "dvbdev.h" +#include "dvb_demux.h" +#include "dvb_frontend.h" +#include "dvb_net.h" + +#include "mantis_common.h" +#include "mantis_ioc.h" +#include "mantis_dvb.h" +#include "mantis_vp1041.h" +#include "stb0899_reg.h" +#include "stb0899_drv.h" +#include "stb0899_cfg.h" +#include "stb6100_cfg.h" +#include "stb6100.h" +#include "lnbp21.h" + +#define MANTIS_MODEL_NAME "VP-1041" +#define MANTIS_DEV_TYPE "DSS/DVB-S/DVB-S2" + +static const struct stb0899_s1_reg vp1041_stb0899_s1_init_1[] = { + + /* 0x0000000b, *//* SYSREG */ + { STB0899_DEV_ID , 0x30 }, + { STB0899_DISCNTRL1 , 0x32 }, + { STB0899_DISCNTRL2 , 0x80 }, + { STB0899_DISRX_ST0 , 0x04 }, + { STB0899_DISRX_ST1 , 0x00 }, + { STB0899_DISPARITY , 0x00 }, + { STB0899_DISFIFO , 0x00 }, + { STB0899_DISSTATUS , 0x20 }, + { STB0899_DISF22 , 0x99 }, + { STB0899_DISF22RX , 0xa8 }, + /* SYSREG ? */ + { STB0899_ACRPRESC , 0x11 }, + { STB0899_ACRDIV1 , 0x0a }, + { STB0899_ACRDIV2 , 0x05 }, + { STB0899_DACR1 , 0x00 }, + { STB0899_DACR2 , 0x00 }, + { STB0899_OUTCFG , 0x00 }, + { STB0899_MODECFG , 0x00 }, + { STB0899_IRQSTATUS_3 , 0xfe }, + { STB0899_IRQSTATUS_2 , 0x03 }, + { STB0899_IRQSTATUS_1 , 0x7c }, + { STB0899_IRQSTATUS_0 , 0xf4 }, + { STB0899_IRQMSK_3 , 0xf3 }, + { STB0899_IRQMSK_2 , 0xfc }, + { STB0899_IRQMSK_1 , 0xff }, + { STB0899_IRQMSK_0 , 0xff }, + { STB0899_IRQCFG , 0x00 }, + { STB0899_I2CCFG , 0x88 }, + { STB0899_I2CRPT , 0x58 }, + { STB0899_IOPVALUE5 , 0x00 }, + { STB0899_IOPVALUE4 , 0x33 }, + { STB0899_IOPVALUE3 , 0x6d }, + { STB0899_IOPVALUE2 , 0x90 }, + { STB0899_IOPVALUE1 , 0x60 }, + { STB0899_IOPVALUE0 , 0x00 }, + { STB0899_GPIO00CFG , 0x82 }, + { STB0899_GPIO01CFG , 0x82 }, + { STB0899_GPIO02CFG , 0x82 }, + { STB0899_GPIO03CFG , 0x82 }, + { STB0899_GPIO04CFG , 0x82 }, + { STB0899_GPIO05CFG , 0x82 }, + { STB0899_GPIO06CFG , 0x82 }, + { STB0899_GPIO07CFG , 0x82 }, + { STB0899_GPIO08CFG , 0x82 }, + { STB0899_GPIO09CFG , 0x82 }, + { STB0899_GPIO10CFG , 0x82 }, + { STB0899_GPIO11CFG , 0x82 }, + { STB0899_GPIO12CFG , 0x82 }, + { STB0899_GPIO13CFG , 0x82 }, + { STB0899_GPIO14CFG , 0x82 }, + { STB0899_GPIO15CFG , 0x82 }, + { STB0899_GPIO16CFG , 0x82 }, + { STB0899_GPIO17CFG , 0x82 }, + { STB0899_GPIO18CFG , 0x82 }, + { STB0899_GPIO19CFG , 0x82 }, + { STB0899_GPIO20CFG , 0x82 }, + { STB0899_SDATCFG , 0xb8 }, + { STB0899_SCLTCFG , 0xba }, + { STB0899_AGCRFCFG , 0x1c }, /* 0x11 */ + { STB0899_GPIO22 , 0x82 }, /* AGCBB2CFG */ + { STB0899_GPIO21 , 0x91 }, /* AGCBB1CFG */ + { STB0899_DIRCLKCFG , 0x82 }, + { STB0899_CLKOUT27CFG , 0x7e }, + { STB0899_STDBYCFG , 0x82 }, + { STB0899_CS0CFG , 0x82 }, + { STB0899_CS1CFG , 0x82 }, + { STB0899_DISEQCOCFG , 0x20 }, + { STB0899_GPIO32CFG , 0x82 }, + { STB0899_GPIO33CFG , 0x82 }, + { STB0899_GPIO34CFG , 0x82 }, + { STB0899_GPIO35CFG , 0x82 }, + { STB0899_GPIO36CFG , 0x82 }, + { STB0899_GPIO37CFG , 0x82 }, + { STB0899_GPIO38CFG , 0x82 }, + { STB0899_GPIO39CFG , 0x82 }, + { STB0899_NCOARSE , 0x17 }, /* 0x15 = 27 Mhz Clock, F/3 = 198MHz, F/6 = 99MHz */ + { STB0899_SYNTCTRL , 0x02 }, /* 0x00 = CLK from CLKI, 0x02 = CLK from XTALI */ + { STB0899_FILTCTRL , 0x00 }, + { STB0899_SYSCTRL , 0x01 }, + { STB0899_STOPCLK1 , 0x20 }, + { STB0899_STOPCLK2 , 0x00 }, + { STB0899_INTBUFSTATUS , 0x00 }, + { STB0899_INTBUFCTRL , 0x0a }, + { 0xffff , 0xff }, +}; + +static const struct stb0899_s1_reg vp1041_stb0899_s1_init_3[] = { + { STB0899_DEMOD , 0x00 }, + { STB0899_RCOMPC , 0xc9 }, + { STB0899_AGC1CN , 0x01 }, + { STB0899_AGC1REF , 0x10 }, + { STB0899_RTC , 0x23 }, + { STB0899_TMGCFG , 0x4e }, + { STB0899_AGC2REF , 0x34 }, + { STB0899_TLSR , 0x84 }, + { STB0899_CFD , 0xf7 }, + { STB0899_ACLC , 0x87 }, + { STB0899_BCLC , 0x94 }, + { STB0899_EQON , 0x41 }, + { STB0899_LDT , 0xf1 }, + { STB0899_LDT2 , 0xe3 }, + { STB0899_EQUALREF , 0xb4 }, + { STB0899_TMGRAMP , 0x10 }, + { STB0899_TMGTHD , 0x30 }, + { STB0899_IDCCOMP , 0xfd }, + { STB0899_QDCCOMP , 0xff }, + { STB0899_POWERI , 0x0c }, + { STB0899_POWERQ , 0x0f }, + { STB0899_RCOMP , 0x6c }, + { STB0899_AGCIQIN , 0x80 }, + { STB0899_AGC2I1 , 0x06 }, + { STB0899_AGC2I2 , 0x00 }, + { STB0899_TLIR , 0x30 }, + { STB0899_RTF , 0x7f }, + { STB0899_DSTATUS , 0x00 }, + { STB0899_LDI , 0xbc }, + { STB0899_CFRM , 0xea }, + { STB0899_CFRL , 0x31 }, + { STB0899_NIRM , 0x2b }, + { STB0899_NIRL , 0x80 }, + { STB0899_ISYMB , 0x1d }, + { STB0899_QSYMB , 0xa6 }, + { STB0899_SFRH , 0x2f }, + { STB0899_SFRM , 0x68 }, + { STB0899_SFRL , 0x40 }, + { STB0899_SFRUPH , 0x2f }, + { STB0899_SFRUPM , 0x68 }, + { STB0899_SFRUPL , 0x40 }, + { STB0899_EQUAI1 , 0x02 }, + { STB0899_EQUAQ1 , 0xff }, + { STB0899_EQUAI2 , 0x04 }, + { STB0899_EQUAQ2 , 0x05 }, + { STB0899_EQUAI3 , 0x02 }, + { STB0899_EQUAQ3 , 0xfd }, + { STB0899_EQUAI4 , 0x03 }, + { STB0899_EQUAQ4 , 0x07 }, + { STB0899_EQUAI5 , 0x08 }, + { STB0899_EQUAQ5 , 0xf5 }, + { STB0899_DSTATUS2 , 0x00 }, + { STB0899_VSTATUS , 0x00 }, + { STB0899_VERROR , 0x86 }, + { STB0899_IQSWAP , 0x2a }, + { STB0899_ECNT1M , 0x00 }, + { STB0899_ECNT1L , 0x00 }, + { STB0899_ECNT2M , 0x00 }, + { STB0899_ECNT2L , 0x00 }, + { STB0899_ECNT3M , 0x0a }, + { STB0899_ECNT3L , 0xad }, + { STB0899_FECAUTO1 , 0x06 }, + { STB0899_FECM , 0x01 }, + { STB0899_VTH12 , 0xb0 }, + { STB0899_VTH23 , 0x7a }, + { STB0899_VTH34 , 0x58 }, + { STB0899_VTH56 , 0x38 }, + { STB0899_VTH67 , 0x34 }, + { STB0899_VTH78 , 0x24 }, + { STB0899_PRVIT , 0xff }, + { STB0899_VITSYNC , 0x19 }, + { STB0899_RSULC , 0xb1 }, /* DVB = 0xb1, DSS = 0xa1 */ + { STB0899_TSULC , 0x42 }, + { STB0899_RSLLC , 0x41 }, + { STB0899_TSLPL , 0x12 }, + { STB0899_TSCFGH , 0x0c }, + { STB0899_TSCFGM , 0x00 }, + { STB0899_TSCFGL , 0x00 }, + { STB0899_TSOUT , 0x69 }, /* 0x0d for CAM */ + { STB0899_RSSYNCDEL , 0x00 }, + { STB0899_TSINHDELH , 0x02 }, + { STB0899_TSINHDELM , 0x00 }, + { STB0899_TSINHDELL , 0x00 }, + { STB0899_TSLLSTKM , 0x1b }, + { STB0899_TSLLSTKL , 0xb3 }, + { STB0899_TSULSTKM , 0x00 }, + { STB0899_TSULSTKL , 0x00 }, + { STB0899_PCKLENUL , 0xbc }, + { STB0899_PCKLENLL , 0xcc }, + { STB0899_RSPCKLEN , 0xbd }, + { STB0899_TSSTATUS , 0x90 }, + { STB0899_ERRCTRL1 , 0xb6 }, + { STB0899_ERRCTRL2 , 0x95 }, + { STB0899_ERRCTRL3 , 0x8d }, + { STB0899_DMONMSK1 , 0x27 }, + { STB0899_DMONMSK0 , 0x03 }, + { STB0899_DEMAPVIT , 0x5c }, + { STB0899_PLPARM , 0x19 }, + { STB0899_PDELCTRL , 0x48 }, + { STB0899_PDELCTRL2 , 0x00 }, + { STB0899_BBHCTRL1 , 0x00 }, + { STB0899_BBHCTRL2 , 0x00 }, + { STB0899_HYSTTHRESH , 0x77 }, + { STB0899_MATCSTM , 0x00 }, + { STB0899_MATCSTL , 0x00 }, + { STB0899_UPLCSTM , 0x00 }, + { STB0899_UPLCSTL , 0x00 }, + { STB0899_DFLCSTM , 0x00 }, + { STB0899_DFLCSTL , 0x00 }, + { STB0899_SYNCCST , 0x00 }, + { STB0899_SYNCDCSTM , 0x00 }, + { STB0899_SYNCDCSTL , 0x00 }, + { STB0899_ISI_ENTRY , 0x00 }, + { STB0899_ISI_BIT_EN , 0x00 }, + { STB0899_MATSTRM , 0xf0 }, + { STB0899_MATSTRL , 0x02 }, + { STB0899_UPLSTRM , 0x45 }, + { STB0899_UPLSTRL , 0x60 }, + { STB0899_DFLSTRM , 0xe3 }, + { STB0899_DFLSTRL , 0x00 }, + { STB0899_SYNCSTR , 0x47 }, + { STB0899_SYNCDSTRM , 0x05 }, + { STB0899_SYNCDSTRL , 0x18 }, + { STB0899_CFGPDELSTATUS1 , 0x19 }, + { STB0899_CFGPDELSTATUS2 , 0x2b }, + { STB0899_BBFERRORM , 0x00 }, + { STB0899_BBFERRORL , 0x01 }, + { STB0899_UPKTERRORM , 0x00 }, + { STB0899_UPKTERRORL , 0x00 }, + { 0xffff , 0xff }, +}; + +struct stb0899_config vp1041_stb0899_config = { + .init_dev = vp1041_stb0899_s1_init_1, + .init_s2_demod = stb0899_s2_init_2, + .init_s1_demod = vp1041_stb0899_s1_init_3, + .init_s2_fec = stb0899_s2_init_4, + .init_tst = stb0899_s1_init_5, + + .demod_address = 0x68, /* 0xd0 >> 1 */ + + .xtal_freq = 27000000, + .inversion = IQ_SWAP_ON, /* 1 */ + + .lo_clk = 76500000, + .hi_clk = 99000000, + + .esno_ave = STB0899_DVBS2_ESNO_AVE, + .esno_quant = STB0899_DVBS2_ESNO_QUANT, + .avframes_coarse = STB0899_DVBS2_AVFRAMES_COARSE, + .avframes_fine = STB0899_DVBS2_AVFRAMES_FINE, + .miss_threshold = STB0899_DVBS2_MISS_THRESHOLD, + .uwp_threshold_acq = STB0899_DVBS2_UWP_THRESHOLD_ACQ, + .uwp_threshold_track = STB0899_DVBS2_UWP_THRESHOLD_TRACK, + .uwp_threshold_sof = STB0899_DVBS2_UWP_THRESHOLD_SOF, + .sof_search_timeout = STB0899_DVBS2_SOF_SEARCH_TIMEOUT, + + .btr_nco_bits = STB0899_DVBS2_BTR_NCO_BITS, + .btr_gain_shift_offset = STB0899_DVBS2_BTR_GAIN_SHIFT_OFFSET, + .crl_nco_bits = STB0899_DVBS2_CRL_NCO_BITS, + .ldpc_max_iter = STB0899_DVBS2_LDPC_MAX_ITER, + + .tuner_get_frequency = stb6100_get_frequency, + .tuner_set_frequency = stb6100_set_frequency, + .tuner_set_bandwidth = stb6100_set_bandwidth, + .tuner_get_bandwidth = stb6100_get_bandwidth, + .tuner_set_rfsiggain = NULL, +}; + +struct stb6100_config vp1041_stb6100_config = { + .tuner_address = 0x60, + .refclock = 27000000, +}; + +static int vp1041_frontend_init(struct mantis_pci *mantis, struct dvb_frontend *fe) +{ + struct i2c_adapter *adapter = &mantis->adapter; + + int err = 0; + + err = mantis_frontend_power(mantis, POWER_ON); + if (err == 0) { + mantis_frontend_soft_reset(mantis); + msleep(250); + mantis->fe = stb0899_attach(&vp1041_stb0899_config, adapter); + if (mantis->fe) { + dprintk(MANTIS_ERROR, 1, + "found STB0899 DVB-S/DVB-S2 frontend @0x%02x", + vp1041_stb0899_config.demod_address); + + if (stb6100_attach(mantis->fe, &vp1041_stb6100_config, adapter)) { + if (!lnbp21_attach(mantis->fe, adapter, 0, 0)) + dprintk(MANTIS_ERROR, 1, "No LNBP21 found!"); + } + } else { + return -EREMOTEIO; + } + } else { + dprintk(MANTIS_ERROR, 1, "Frontend on <%s> POWER ON failed! <%d>", + adapter->name, + err); + + return -EIO; + } + + + dprintk(MANTIS_ERROR, 1, "Done!"); + + return 0; +} + +struct mantis_hwconfig vp1041_config = { + .model_name = MANTIS_MODEL_NAME, + .dev_type = MANTIS_DEV_TYPE, + .ts_size = MANTIS_TS_188, + + .baud_rate = MANTIS_BAUD_9600, + .parity = MANTIS_PARITY_NONE, + .bytes = 0, + + .frontend_init = vp1041_frontend_init, + .power = GPIF_A12, + .reset = GPIF_A13, +}; diff --git a/drivers/media/dvb/mantis/mantis_vp1041.h b/drivers/media/dvb/mantis/mantis_vp1041.h new file mode 100644 index 00000000000..1ae5b3de808 --- /dev/null +++ b/drivers/media/dvb/mantis/mantis_vp1041.h @@ -0,0 +1,33 @@ +/* + Mantis VP-1041 driver + + Copyright (C) Manu Abraham (abraham.manu@gmail.com) + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +*/ + +#ifndef __MANTIS_VP1041_H +#define __MANTIS_VP1041_H + +#include "mantis_common.h" + +#define MANTIS_VP_1041_DVB_S2 0x0031 +#define SKYSTAR_HD2_10 0x0001 +#define SKYSTAR_HD2_20 0x0003 +#define CINERGY_S2_PCI_HD 0x1179 + +extern struct mantis_hwconfig vp1041_config; + +#endif /* __MANTIS_VP1041_H */ diff --git a/drivers/media/dvb/mantis/mantis_vp2033.c b/drivers/media/dvb/mantis/mantis_vp2033.c new file mode 100644 index 00000000000..10ce81790a8 --- /dev/null +++ b/drivers/media/dvb/mantis/mantis_vp2033.c @@ -0,0 +1,187 @@ +/* + Mantis VP-2033 driver + + Copyright (C) Manu Abraham (abraham.manu@gmail.com) + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +*/ + +#include <linux/signal.h> +#include <linux/sched.h> +#include <linux/interrupt.h> + +#include "dmxdev.h" +#include "dvbdev.h" +#include "dvb_demux.h" +#include "dvb_frontend.h" +#include "dvb_net.h" + +#include "tda1002x.h" +#include "mantis_common.h" +#include "mantis_ioc.h" +#include "mantis_dvb.h" +#include "mantis_vp2033.h" + +#define MANTIS_MODEL_NAME "VP-2033" +#define MANTIS_DEV_TYPE "DVB-C" + +struct tda1002x_config vp2033_tda1002x_cu1216_config = { + .demod_address = 0x18 >> 1, + .invert = 1, +}; + +struct tda10023_config vp2033_tda10023_cu1216_config = { + .demod_address = 0x18 >> 1, + .invert = 1, +}; + +static u8 read_pwm(struct mantis_pci *mantis) +{ + struct i2c_adapter *adapter = &mantis->adapter; + + u8 b = 0xff; + u8 pwm; + struct i2c_msg msg[] = { + {.addr = 0x50, .flags = 0, .buf = &b, .len = 1}, + {.addr = 0x50, .flags = I2C_M_RD, .buf = &pwm, .len = 1} + }; + + if ((i2c_transfer(adapter, msg, 2) != 2) + || (pwm == 0xff)) + pwm = 0x48; + + return pwm; +} + +static int tda1002x_cu1216_tuner_set(struct dvb_frontend *fe, struct dvb_frontend_parameters *params) +{ + struct mantis_pci *mantis = fe->dvb->priv; + struct i2c_adapter *adapter = &mantis->adapter; + + u8 buf[6]; + struct i2c_msg msg = {.addr = 0x60, .flags = 0, .buf = buf, .len = sizeof(buf)}; + int i; + +#define CU1216_IF 36125000 +#define TUNER_MUL 62500 + + u32 div = (params->frequency + CU1216_IF + TUNER_MUL / 2) / TUNER_MUL; + + buf[0] = (div >> 8) & 0x7f; + buf[1] = div & 0xff; + buf[2] = 0xce; + buf[3] = (params->frequency < 150000000 ? 0x01 : + params->frequency < 445000000 ? 0x02 : 0x04); + buf[4] = 0xde; + buf[5] = 0x20; + + if (fe->ops.i2c_gate_ctrl) + fe->ops.i2c_gate_ctrl(fe, 1); + + if (i2c_transfer(adapter, &msg, 1) != 1) + return -EIO; + + /* wait for the pll lock */ + msg.flags = I2C_M_RD; + msg.len = 1; + for (i = 0; i < 20; i++) { + if (fe->ops.i2c_gate_ctrl) + fe->ops.i2c_gate_ctrl(fe, 1); + + if (i2c_transfer(adapter, &msg, 1) == 1 && (buf[0] & 0x40)) + break; + + msleep(10); + } + + /* switch the charge pump to the lower current */ + msg.flags = 0; + msg.len = 2; + msg.buf = &buf[2]; + buf[2] &= ~0x40; + if (fe->ops.i2c_gate_ctrl) + fe->ops.i2c_gate_ctrl(fe, 1); + + if (i2c_transfer(adapter, &msg, 1) != 1) + return -EIO; + + return 0; +} + +static int vp2033_frontend_init(struct mantis_pci *mantis, struct dvb_frontend *fe) +{ + struct i2c_adapter *adapter = &mantis->adapter; + + int err = 0; + + err = mantis_frontend_power(mantis, POWER_ON); + if (err == 0) { + mantis_frontend_soft_reset(mantis); + msleep(250); + + dprintk(MANTIS_ERROR, 1, "Probing for CU1216 (DVB-C)"); + fe = tda10021_attach(&vp2033_tda1002x_cu1216_config, + adapter, + read_pwm(mantis)); + + if (fe) { + dprintk(MANTIS_ERROR, 1, + "found Philips CU1216 DVB-C frontend (TDA10021) @ 0x%02x", + vp2033_tda1002x_cu1216_config.demod_address); + } else { + fe = tda10023_attach(&vp2033_tda10023_cu1216_config, + adapter, + read_pwm(mantis)); + + if (fe) { + dprintk(MANTIS_ERROR, 1, + "found Philips CU1216 DVB-C frontend (TDA10023) @ 0x%02x", + vp2033_tda1002x_cu1216_config.demod_address); + } + } + + if (fe) { + fe->ops.tuner_ops.set_params = tda1002x_cu1216_tuner_set; + dprintk(MANTIS_ERROR, 1, "Mantis DVB-C Philips CU1216 frontend attach success"); + } else { + return -1; + } + } else { + dprintk(MANTIS_ERROR, 1, "Frontend on <%s> POWER ON failed! <%d>", + adapter->name, + err); + + return -EIO; + } + + mantis->fe = fe; + dprintk(MANTIS_DEBUG, 1, "Done!"); + + return 0; +} + +struct mantis_hwconfig vp2033_config = { + .model_name = MANTIS_MODEL_NAME, + .dev_type = MANTIS_DEV_TYPE, + .ts_size = MANTIS_TS_204, + + .baud_rate = MANTIS_BAUD_9600, + .parity = MANTIS_PARITY_NONE, + .bytes = 0, + + .frontend_init = vp2033_frontend_init, + .power = GPIF_A12, + .reset = GPIF_A13, +}; diff --git a/drivers/media/dvb/mantis/mantis_vp2033.h b/drivers/media/dvb/mantis/mantis_vp2033.h new file mode 100644 index 00000000000..c55242b79d5 --- /dev/null +++ b/drivers/media/dvb/mantis/mantis_vp2033.h @@ -0,0 +1,30 @@ +/* + Mantis VP-2033 driver + + Copyright (C) Manu Abraham (abraham.manu@gmail.com) + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +*/ + +#ifndef __MANTIS_VP2033_H +#define __MANTIS_VP2033_H + +#include "mantis_common.h" + +#define MANTIS_VP_2033_DVB_C 0x0008 + +extern struct mantis_hwconfig vp2033_config; + +#endif /* __MANTIS_VP2033_H */ diff --git a/drivers/media/dvb/mantis/mantis_vp2040.c b/drivers/media/dvb/mantis/mantis_vp2040.c new file mode 100644 index 00000000000..a7ca233e800 --- /dev/null +++ b/drivers/media/dvb/mantis/mantis_vp2040.c @@ -0,0 +1,186 @@ +/* + Mantis VP-2040 driver + + Copyright (C) Manu Abraham (abraham.manu@gmail.com) + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +*/ + +#include <linux/signal.h> +#include <linux/sched.h> +#include <linux/interrupt.h> + +#include "dmxdev.h" +#include "dvbdev.h" +#include "dvb_demux.h" +#include "dvb_frontend.h" +#include "dvb_net.h" + +#include "tda1002x.h" +#include "mantis_common.h" +#include "mantis_ioc.h" +#include "mantis_dvb.h" +#include "mantis_vp2040.h" + +#define MANTIS_MODEL_NAME "VP-2040" +#define MANTIS_DEV_TYPE "DVB-C" + +struct tda1002x_config vp2040_tda1002x_cu1216_config = { + .demod_address = 0x18 >> 1, + .invert = 1, +}; + +struct tda10023_config vp2040_tda10023_cu1216_config = { + .demod_address = 0x18 >> 1, + .invert = 1, +}; + +static int tda1002x_cu1216_tuner_set(struct dvb_frontend *fe, struct dvb_frontend_parameters *params) +{ + struct mantis_pci *mantis = fe->dvb->priv; + struct i2c_adapter *adapter = &mantis->adapter; + + u8 buf[6]; + struct i2c_msg msg = {.addr = 0x60, .flags = 0, .buf = buf, .len = sizeof(buf)}; + int i; + +#define CU1216_IF 36125000 +#define TUNER_MUL 62500 + + u32 div = (params->frequency + CU1216_IF + TUNER_MUL / 2) / TUNER_MUL; + + buf[0] = (div >> 8) & 0x7f; + buf[1] = div & 0xff; + buf[2] = 0xce; + buf[3] = (params->frequency < 150000000 ? 0x01 : + params->frequency < 445000000 ? 0x02 : 0x04); + buf[4] = 0xde; + buf[5] = 0x20; + + if (fe->ops.i2c_gate_ctrl) + fe->ops.i2c_gate_ctrl(fe, 1); + + if (i2c_transfer(adapter, &msg, 1) != 1) + return -EIO; + + /* wait for the pll lock */ + msg.flags = I2C_M_RD; + msg.len = 1; + for (i = 0; i < 20; i++) { + if (fe->ops.i2c_gate_ctrl) + fe->ops.i2c_gate_ctrl(fe, 1); + + if (i2c_transfer(adapter, &msg, 1) == 1 && (buf[0] & 0x40)) + break; + + msleep(10); + } + + /* switch the charge pump to the lower current */ + msg.flags = 0; + msg.len = 2; + msg.buf = &buf[2]; + buf[2] &= ~0x40; + if (fe->ops.i2c_gate_ctrl) + fe->ops.i2c_gate_ctrl(fe, 1); + + if (i2c_transfer(adapter, &msg, 1) != 1) + return -EIO; + + return 0; +} + +static u8 read_pwm(struct mantis_pci *mantis) +{ + struct i2c_adapter *adapter = &mantis->adapter; + + u8 b = 0xff; + u8 pwm; + struct i2c_msg msg[] = { + {.addr = 0x50, .flags = 0, .buf = &b, .len = 1}, + {.addr = 0x50, .flags = I2C_M_RD, .buf = &pwm, .len = 1} + }; + + if ((i2c_transfer(adapter, msg, 2) != 2) + || (pwm == 0xff)) + pwm = 0x48; + + return pwm; +} + +static int vp2040_frontend_init(struct mantis_pci *mantis, struct dvb_frontend *fe) +{ + struct i2c_adapter *adapter = &mantis->adapter; + + int err = 0; + + err = mantis_frontend_power(mantis, POWER_ON); + if (err == 0) { + mantis_frontend_soft_reset(mantis); + msleep(250); + + dprintk(MANTIS_ERROR, 1, "Probing for CU1216 (DVB-C)"); + fe = tda10021_attach(&vp2040_tda1002x_cu1216_config, + adapter, + read_pwm(mantis)); + + if (fe) { + dprintk(MANTIS_ERROR, 1, + "found Philips CU1216 DVB-C frontend (TDA10021) @ 0x%02x", + vp2040_tda1002x_cu1216_config.demod_address); + } else { + fe = tda10023_attach(&vp2040_tda10023_cu1216_config, + adapter, + read_pwm(mantis)); + + if (fe) { + dprintk(MANTIS_ERROR, 1, + "found Philips CU1216 DVB-C frontend (TDA10023) @ 0x%02x", + vp2040_tda1002x_cu1216_config.demod_address); + } + } + + if (fe) { + fe->ops.tuner_ops.set_params = tda1002x_cu1216_tuner_set; + dprintk(MANTIS_ERROR, 1, "Mantis DVB-C Philips CU1216 frontend attach success"); + } else { + return -1; + } + } else { + dprintk(MANTIS_ERROR, 1, "Frontend on <%s> POWER ON failed! <%d>", + adapter->name, + err); + + return -EIO; + } + mantis->fe = fe; + dprintk(MANTIS_DEBUG, 1, "Done!"); + + return 0; +} + +struct mantis_hwconfig vp2040_config = { + .model_name = MANTIS_MODEL_NAME, + .dev_type = MANTIS_DEV_TYPE, + .ts_size = MANTIS_TS_204, + + .baud_rate = MANTIS_BAUD_9600, + .parity = MANTIS_PARITY_NONE, + .bytes = 0, + + .frontend_init = vp2040_frontend_init, + .power = GPIF_A12, + .reset = GPIF_A13, +}; diff --git a/drivers/media/dvb/mantis/mantis_vp2040.h b/drivers/media/dvb/mantis/mantis_vp2040.h new file mode 100644 index 00000000000..d125e219b68 --- /dev/null +++ b/drivers/media/dvb/mantis/mantis_vp2040.h @@ -0,0 +1,32 @@ +/* + Mantis VP-2040 driver + + Copyright (C) Manu Abraham (abraham.manu@gmail.com) + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +*/ + +#ifndef __MANTIS_VP2040_H +#define __MANTIS_VP2040_H + +#include "mantis_common.h" + +#define MANTIS_VP_2040_DVB_C 0x0043 +#define CINERGY_C 0x1178 +#define CABLESTAR_HD2 0x0002 + +extern struct mantis_hwconfig vp2040_config; + +#endif /* __MANTIS_VP2040_H */ diff --git a/drivers/media/dvb/mantis/mantis_vp3028.c b/drivers/media/dvb/mantis/mantis_vp3028.c new file mode 100644 index 00000000000..4155c838a18 --- /dev/null +++ b/drivers/media/dvb/mantis/mantis_vp3028.c @@ -0,0 +1,38 @@ +/* + Mantis VP-3028 driver + + Copyright (C) Manu Abraham (abraham.manu@gmail.com) + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +*/ + +#include "mantis_common.h" +#include "mantis_vp3028.h" + +struct zl10353_config mantis_vp3028_config = { + .demod_address = 0x0f, +}; + +#define MANTIS_MODEL_NAME "VP-3028" +#define MANTIS_DEV_TYPE "DVB-T" + +struct mantis_hwconfig vp3028_mantis_config = { + .model_name = MANTIS_MODEL_NAME, + .dev_type = MANTIS_DEV_TYPE, + .ts_size = MANTIS_TS_188, + .baud_rate = MANTIS_BAUD_9600, + .parity = MANTIS_PARITY_NONE, + .bytes = 0, +}; diff --git a/drivers/media/dvb/mantis/mantis_vp3028.h b/drivers/media/dvb/mantis/mantis_vp3028.h new file mode 100644 index 00000000000..b07be6adc52 --- /dev/null +++ b/drivers/media/dvb/mantis/mantis_vp3028.h @@ -0,0 +1,33 @@ +/* + Mantis VP-3028 driver + + Copyright (C) Manu Abraham (abraham.manu@gmail.com) + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +*/ + +#ifndef __MANTIS_VP3028_H +#define __MANTIS_VP3028_H + +#include "dvb_frontend.h" +#include "mantis_common.h" +#include "zl10353.h" + +#define MANTIS_VP_3028_DVB_T 0x0028 + +extern struct zl10353_config mantis_vp3028_config; +extern struct mantis_hwconfig vp3028_mantis_config; + +#endif /* __MANTIS_VP3028_H */ diff --git a/drivers/media/dvb/mantis/mantis_vp3030.c b/drivers/media/dvb/mantis/mantis_vp3030.c new file mode 100644 index 00000000000..1f433421495 --- /dev/null +++ b/drivers/media/dvb/mantis/mantis_vp3030.c @@ -0,0 +1,105 @@ +/* + Mantis VP-3030 driver + + Copyright (C) Manu Abraham (abraham.manu@gmail.com) + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +*/ + +#include <linux/signal.h> +#include <linux/sched.h> +#include <linux/interrupt.h> + +#include "dmxdev.h" +#include "dvbdev.h" +#include "dvb_demux.h" +#include "dvb_frontend.h" +#include "dvb_net.h" + +#include "zl10353.h" +#include "tda665x.h" +#include "mantis_common.h" +#include "mantis_ioc.h" +#include "mantis_dvb.h" +#include "mantis_vp3030.h" + +struct zl10353_config mantis_vp3030_config = { + .demod_address = 0x0f, +}; + +struct tda665x_config env57h12d5_config = { + .name = "ENV57H12D5 (ET-50DT)", + .addr = 0x60, + .frequency_min = 47000000, + .frequency_max = 862000000, + .frequency_offst = 3616667, + .ref_multiplier = 6, /* 1/6 MHz */ + .ref_divider = 100000, /* 1/6 MHz */ +}; + +#define MANTIS_MODEL_NAME "VP-3030" +#define MANTIS_DEV_TYPE "DVB-T" + + +static int vp3030_frontend_init(struct mantis_pci *mantis, struct dvb_frontend *fe) +{ + struct i2c_adapter *adapter = &mantis->adapter; + struct mantis_hwconfig *config = mantis->hwconfig; + int err = 0; + + gpio_set_bits(mantis, config->reset, 0); + msleep(100); + err = mantis_frontend_power(mantis, POWER_ON); + msleep(100); + gpio_set_bits(mantis, config->reset, 1); + + if (err == 0) { + msleep(250); + dprintk(MANTIS_ERROR, 1, "Probing for 10353 (DVB-T)"); + fe = zl10353_attach(&mantis_vp3030_config, adapter); + + if (!fe) + return -1; + + tda665x_attach(fe, &env57h12d5_config, adapter); + } else { + dprintk(MANTIS_ERROR, 1, "Frontend on <%s> POWER ON failed! <%d>", + adapter->name, + err); + + return -EIO; + + } + mantis->fe = fe; + dprintk(MANTIS_ERROR, 1, "Done!"); + + return 0; +} + +struct mantis_hwconfig vp3030_config = { + .model_name = MANTIS_MODEL_NAME, + .dev_type = MANTIS_DEV_TYPE, + .ts_size = MANTIS_TS_188, + + .baud_rate = MANTIS_BAUD_9600, + .parity = MANTIS_PARITY_NONE, + .bytes = 0, + + .frontend_init = vp3030_frontend_init, + .power = GPIF_A12, + .reset = GPIF_A13, + + .i2c_mode = MANTIS_BYTE_MODE +}; diff --git a/drivers/media/dvb/mantis/mantis_vp3030.h b/drivers/media/dvb/mantis/mantis_vp3030.h new file mode 100644 index 00000000000..5f12c426627 --- /dev/null +++ b/drivers/media/dvb/mantis/mantis_vp3030.h @@ -0,0 +1,30 @@ +/* + Mantis VP-3030 driver + + Copyright (C) Manu Abraham (abraham.manu@gmail.com) + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +*/ + +#ifndef __MANTIS_VP3030_H +#define __MANTIS_VP3030_H + +#include "mantis_common.h" + +#define MANTIS_VP_3030_DVB_T 0x0024 + +extern struct mantis_hwconfig vp3030_config; + +#endif /* __MANTIS_VP3030_H */ |