diff options
Diffstat (limited to 'drivers/media')
| -rw-r--r-- | drivers/media/video/gspca/ov519.c | 62 |
1 files changed, 62 insertions, 0 deletions
diff --git a/drivers/media/video/gspca/ov519.c b/drivers/media/video/gspca/ov519.c index 541b8f0b0d3..d9b89a2803d 100644 --- a/drivers/media/video/gspca/ov519.c +++ b/drivers/media/video/gspca/ov519.c @@ -38,6 +38,7 @@ */ #define MODULE_NAME "ov519" +#include <linux/input.h> #include "gspca.h" MODULE_AUTHOR("Jean-Francois Moine <http://moinejf.free.fr>"); @@ -70,6 +71,9 @@ struct sd { char invert_led; #define BRIDGE_INVERT_LED 8 + char snapshot_pressed; + char snapshot_needs_reset; + /* Determined by sensor type */ __u8 sif; @@ -2685,6 +2689,26 @@ static void ov51x_led_control(struct sd *sd, int on) } } +static void sd_reset_snapshot(struct gspca_dev *gspca_dev) +{ + struct sd *sd = (struct sd *) gspca_dev; + + if (!sd->snapshot_needs_reset) + return; + + /* Note it is important that we clear sd->snapshot_needs_reset, + before actually clearing the snapshot state in the bridge + otherwise we might race with the pkt_scan interrupt handler */ + sd->snapshot_needs_reset = 0; + + switch (sd->bridge) { + case BRIDGE_OV519: + reg_w(sd, R51x_SYS_RESET, 0x40); + reg_w(sd, R51x_SYS_RESET, 0x00); + break; + } +} + static int ov51x_upload_quan_tables(struct sd *sd) { const unsigned char yQuanTable511[] = { @@ -3921,6 +3945,12 @@ static int sd_start(struct gspca_dev *gspca_dev) setautobrightness(sd); setfreq(sd); + /* Force clear snapshot state in case the snapshot button was + pressed while we weren't streaming */ + sd->snapshot_needs_reset = 1; + sd_reset_snapshot(gspca_dev); + sd->snapshot_pressed = 0; + ret = ov51x_restart(sd); if (ret < 0) goto out; @@ -4033,6 +4063,30 @@ static void ov518_pkt_scan(struct gspca_dev *gspca_dev, gspca_frame_add(gspca_dev, INTER_PACKET, data, len); } +static void ov519_handle_button(struct gspca_dev *gspca_dev, u8 state) +{ + struct sd *sd = (struct sd *) gspca_dev; + + /* This should never happen, but better to check */ + if (state != 0 && state != 1) + return; + + /* We may need to reset the button state multiple times, as resetting + does not work as long as the button stays pressed, so always set + snapshot_needs_reset (instead of only on a state change to 1). */ + if (state) + sd->snapshot_needs_reset = 1; + + if (sd->snapshot_pressed != state) { +#ifdef CONFIG_INPUT + input_report_key(gspca_dev->input_dev, KEY_CAMERA, state); + input_sync(gspca_dev->input_dev); +#endif + + sd->snapshot_pressed = state; + } +} + static void ov519_pkt_scan(struct gspca_dev *gspca_dev, u8 *data, /* isoc packet */ int len) /* iso packet length */ @@ -4052,6 +4106,9 @@ static void ov519_pkt_scan(struct gspca_dev *gspca_dev, if (data[0] == 0xff && data[1] == 0xff && data[2] == 0xff) { switch (data[3]) { case 0x50: /* start of frame */ + /* Don't check the button state here, as the state + usually (always ?) changes at EOF and checking it + here leads to unnecessary snapshot state resets. */ #define HDRSZ 16 data += HDRSZ; len -= HDRSZ; @@ -4063,6 +4120,7 @@ static void ov519_pkt_scan(struct gspca_dev *gspca_dev, gspca_dev->last_packet_type = DISCARD_PACKET; return; case 0x51: /* end of frame */ + ov519_handle_button(gspca_dev, data[11]); if (data[9] != 0) gspca_dev->last_packet_type = DISCARD_PACKET; gspca_frame_add(gspca_dev, LAST_PACKET, @@ -4505,9 +4563,13 @@ static const struct sd_desc sd_desc = { .stopN = sd_stopN, .stop0 = sd_stop0, .pkt_scan = sd_pkt_scan, + .dq_callback = sd_reset_snapshot, .querymenu = sd_querymenu, .get_jcomp = sd_get_jcomp, .set_jcomp = sd_set_jcomp, +#ifdef CONFIG_INPUT + .other_input = 1, +#endif }; /* -- module initialisation -- */ |