diff options
Diffstat (limited to 'drivers/media')
| -rw-r--r-- | drivers/media/radio/Kconfig | 12 | ||||
| -rw-r--r-- | drivers/media/radio/Makefile | 1 | ||||
| -rw-r--r-- | drivers/media/radio/radio-ma901.c | 460 |
3 files changed, 473 insertions, 0 deletions
diff --git a/drivers/media/radio/Kconfig b/drivers/media/radio/Kconfig index 8090b87b306..ead99285373 100644 --- a/drivers/media/radio/Kconfig +++ b/drivers/media/radio/Kconfig @@ -124,6 +124,18 @@ config USB_KEENE To compile this driver as a module, choose M here: the module will be called radio-keene. +config USB_MA901 + tristate "Masterkit MA901 USB FM radio support" + depends on USB && VIDEO_V4L2 + ---help--- + Say Y here if you want to connect this type of radio to your + computer's USB port. Note that the audio is not digital, and + you must connect the line out connector to a sound card or a + set of speakers or headphones. + + To compile this driver as a module, choose M here: the + module will be called radio-ma901. + config RADIO_TEA5764 tristate "TEA5764 I2C FM radio support" depends on I2C && VIDEO_V4L2 diff --git a/drivers/media/radio/Makefile b/drivers/media/radio/Makefile index c03ce4fe74e..303eaebdb85 100644 --- a/drivers/media/radio/Makefile +++ b/drivers/media/radio/Makefile @@ -24,6 +24,7 @@ obj-$(CONFIG_USB_DSBR) += dsbr100.o obj-$(CONFIG_RADIO_SI470X) += si470x/ obj-$(CONFIG_USB_MR800) += radio-mr800.o obj-$(CONFIG_USB_KEENE) += radio-keene.o +obj-$(CONFIG_USB_MA901) += radio-ma901.o obj-$(CONFIG_RADIO_TEA5764) += radio-tea5764.o obj-$(CONFIG_RADIO_SAA7706H) += saa7706h.o obj-$(CONFIG_RADIO_TEF6862) += tef6862.o diff --git a/drivers/media/radio/radio-ma901.c b/drivers/media/radio/radio-ma901.c new file mode 100644 index 00000000000..c61f590029a --- /dev/null +++ b/drivers/media/radio/radio-ma901.c @@ -0,0 +1,460 @@ +/* + * Driver for the MasterKit MA901 USB FM radio. This device plugs + * into the USB port and an analog audio input or headphones, so this thing + * only deals with initialization, frequency setting, volume. + * + * Copyright (c) 2012 Alexey Klimov <klimov.linux@gmail.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/init.h> +#include <linux/slab.h> +#include <linux/input.h> +#include <linux/videodev2.h> +#include <media/v4l2-device.h> +#include <media/v4l2-ioctl.h> +#include <media/v4l2-ctrls.h> +#include <media/v4l2-event.h> +#include <linux/usb.h> +#include <linux/mutex.h> + +#define DRIVER_AUTHOR "Alexey Klimov <klimov.linux@gmail.com>" +#define DRIVER_DESC "Masterkit MA901 USB FM radio driver" +#define DRIVER_VERSION "0.0.1" + +MODULE_AUTHOR(DRIVER_AUTHOR); +MODULE_DESCRIPTION(DRIVER_DESC); +MODULE_LICENSE("GPL"); +MODULE_VERSION(DRIVER_VERSION); + +#define USB_MA901_VENDOR 0x16c0 +#define USB_MA901_PRODUCT 0x05df + +/* dev_warn macro with driver name */ +#define MA901_DRIVER_NAME "radio-ma901" +#define ma901radio_dev_warn(dev, fmt, arg...) \ + dev_warn(dev, MA901_DRIVER_NAME " - " fmt, ##arg) + +#define ma901radio_dev_err(dev, fmt, arg...) \ + dev_err(dev, MA901_DRIVER_NAME " - " fmt, ##arg) + +/* Probably USB_TIMEOUT should be modified in module parameter */ +#define BUFFER_LENGTH 8 +#define USB_TIMEOUT 500 + +#define FREQ_MIN 87.5 +#define FREQ_MAX 108.0 +#define FREQ_MUL 16000 + +#define MA901_VOLUME_MAX 16 +#define MA901_VOLUME_MIN 0 + +/* Commands that device should understand + * List isn't full and will be updated with implementation of new functions + */ +#define MA901_RADIO_SET_FREQ 0x03 +#define MA901_RADIO_SET_VOLUME 0x04 +#define MA901_RADIO_SET_MONO_STEREO 0x05 + +/* Comfortable defines for ma901radio_set_stereo */ +#define MA901_WANT_STEREO 0x50 +#define MA901_WANT_MONO 0xd0 + +/* module parameter */ +static int radio_nr = -1; +module_param(radio_nr, int, 0); +MODULE_PARM_DESC(radio_nr, "Radio file number"); + +/* Data for one (physical) device */ +struct ma901radio_device { + /* reference to USB and video device */ + struct usb_device *usbdev; + struct usb_interface *intf; + struct video_device vdev; + struct v4l2_device v4l2_dev; + struct v4l2_ctrl_handler hdl; + + u8 *buffer; + struct mutex lock; /* buffer locking */ + int curfreq; + u16 volume; + int stereo; + bool muted; +}; + +static inline struct ma901radio_device *to_ma901radio_dev(struct v4l2_device *v4l2_dev) +{ + return container_of(v4l2_dev, struct ma901radio_device, v4l2_dev); +} + +/* set a frequency, freq is defined by v4l's TUNER_LOW, i.e. 1/16th kHz */ +static int ma901radio_set_freq(struct ma901radio_device *radio, int freq) +{ + unsigned int freq_send = 0x300 + (freq >> 5) / 25; + int retval; + + radio->buffer[0] = 0x0a; + radio->buffer[1] = MA901_RADIO_SET_FREQ; + radio->buffer[2] = ((freq_send >> 8) & 0xff) + 0x80; + radio->buffer[3] = freq_send & 0xff; + radio->buffer[4] = 0x00; + radio->buffer[5] = 0x00; + radio->buffer[6] = 0x00; + radio->buffer[7] = 0x00; + + retval = usb_control_msg(radio->usbdev, usb_sndctrlpipe(radio->usbdev, 0), + 9, 0x21, 0x0300, 0, + radio->buffer, BUFFER_LENGTH, USB_TIMEOUT); + if (retval < 0) + return retval; + + radio->curfreq = freq; + return 0; +} + +static int ma901radio_set_volume(struct ma901radio_device *radio, u16 vol_to_set) +{ + int retval; + + radio->buffer[0] = 0x0a; + radio->buffer[1] = MA901_RADIO_SET_VOLUME; + radio->buffer[2] = 0xc2; + radio->buffer[3] = vol_to_set + 0x20; + radio->buffer[4] = 0x00; + radio->buffer[5] = 0x00; + radio->buffer[6] = 0x00; + radio->buffer[7] = 0x00; + + retval = usb_control_msg(radio->usbdev, usb_sndctrlpipe(radio->usbdev, 0), + 9, 0x21, 0x0300, 0, + radio->buffer, BUFFER_LENGTH, USB_TIMEOUT); + if (retval < 0) + return retval; + + radio->volume = vol_to_set; + return retval; +} + +static int ma901_set_stereo(struct ma901radio_device *radio, u8 stereo) +{ + int retval; + + radio->buffer[0] = 0x0a; + radio->buffer[1] = MA901_RADIO_SET_MONO_STEREO; + radio->buffer[2] = stereo; + radio->buffer[3] = 0x00; + radio->buffer[4] = 0x00; + radio->buffer[5] = 0x00; + radio->buffer[6] = 0x00; + radio->buffer[7] = 0x00; + + retval = usb_control_msg(radio->usbdev, usb_sndctrlpipe(radio->usbdev, 0), + 9, 0x21, 0x0300, 0, + radio->buffer, BUFFER_LENGTH, USB_TIMEOUT); + + if (retval < 0) + return retval; + + if (stereo == MA901_WANT_STEREO) + radio->stereo = V4L2_TUNER_MODE_STEREO; + else + radio->stereo = V4L2_TUNER_MODE_MONO; + + return retval; +} + +/* Handle unplugging the device. + * We call video_unregister_device in any case. + * The last function called in this procedure is + * usb_ma901radio_device_release. + */ +static void usb_ma901radio_disconnect(struct usb_interface *intf) +{ + struct ma901radio_device *radio = to_ma901radio_dev(usb_get_intfdata(intf)); + + mutex_lock(&radio->lock); + video_unregister_device(&radio->vdev); + usb_set_intfdata(intf, NULL); + v4l2_device_disconnect(&radio->v4l2_dev); + mutex_unlock(&radio->lock); + v4l2_device_put(&radio->v4l2_dev); +} + +/* vidioc_querycap - query device capabilities */ +static int vidioc_querycap(struct file *file, void *priv, + struct v4l2_capability *v) +{ + struct ma901radio_device *radio = video_drvdata(file); + + strlcpy(v->driver, "radio-ma901", sizeof(v->driver)); + strlcpy(v->card, "Masterkit MA901 USB FM Radio", sizeof(v->card)); + usb_make_path(radio->usbdev, v->bus_info, sizeof(v->bus_info)); + v->device_caps = V4L2_CAP_RADIO | V4L2_CAP_TUNER; + v->capabilities = v->device_caps | V4L2_CAP_DEVICE_CAPS; + return 0; +} + +/* vidioc_g_tuner - get tuner attributes */ +static int vidioc_g_tuner(struct file *file, void *priv, + struct v4l2_tuner *v) +{ + struct ma901radio_device *radio = video_drvdata(file); + + if (v->index > 0) + return -EINVAL; + + v->signal = 0; + + /* TODO: the same words like in _probe() goes here. + * When receiving of stats will be implemented then we can call + * ma901radio_get_stat(). + * retval = ma901radio_get_stat(radio, &is_stereo, &v->signal); + */ + + strcpy(v->name, "FM"); + v->type = V4L2_TUNER_RADIO; + v->rangelow = FREQ_MIN * FREQ_MUL; + v->rangehigh = FREQ_MAX * FREQ_MUL; + v->capability = V4L2_TUNER_CAP_LOW | V4L2_TUNER_CAP_STEREO; + /* v->rxsubchans = is_stereo ? V4L2_TUNER_SUB_STEREO : V4L2_TUNER_SUB_MONO; */ + v->audmode = radio->stereo ? + V4L2_TUNER_MODE_STEREO : V4L2_TUNER_MODE_MONO; + return 0; +} + +/* vidioc_s_tuner - set tuner attributes */ +static int vidioc_s_tuner(struct file *file, void *priv, + struct v4l2_tuner *v) +{ + struct ma901radio_device *radio = video_drvdata(file); + + if (v->index > 0) + return -EINVAL; + + /* mono/stereo selector */ + switch (v->audmode) { + case V4L2_TUNER_MODE_MONO: + return ma901_set_stereo(radio, MA901_WANT_MONO); + default: + return ma901_set_stereo(radio, MA901_WANT_STEREO); + } +} + +/* vidioc_s_frequency - set tuner radio frequency */ +static int vidioc_s_frequency(struct file *file, void *priv, + struct v4l2_frequency *f) +{ + struct ma901radio_device *radio = video_drvdata(file); + + if (f->tuner != 0) + return -EINVAL; + + return ma901radio_set_freq(radio, clamp_t(unsigned, f->frequency, + FREQ_MIN * FREQ_MUL, FREQ_MAX * FREQ_MUL)); +} + +/* vidioc_g_frequency - get tuner radio frequency */ +static int vidioc_g_frequency(struct file *file, void *priv, + struct v4l2_frequency *f) +{ + struct ma901radio_device *radio = video_drvdata(file); + + if (f->tuner != 0) + return -EINVAL; + f->frequency = radio->curfreq; + + return 0; +} + +static int usb_ma901radio_s_ctrl(struct v4l2_ctrl *ctrl) +{ + struct ma901radio_device *radio = + container_of(ctrl->handler, struct ma901radio_device, hdl); + + switch (ctrl->id) { + case V4L2_CID_AUDIO_VOLUME: /* set volume */ + return ma901radio_set_volume(radio, (u16)ctrl->val); + } + + return -EINVAL; +} + +/* TODO: Should we really need to implement suspend and resume functions? + * Radio has it's own memory and will continue playing if power is present + * on usb port and on resume it will start to play again based on freq, volume + * values in device memory. + */ +static int usb_ma901radio_suspend(struct usb_interface *intf, pm_message_t message) +{ + return 0; +} + +static int usb_ma901radio_resume(struct usb_interface *intf) +{ + return 0; +} + +static const struct v4l2_ctrl_ops usb_ma901radio_ctrl_ops = { + .s_ctrl = usb_ma901radio_s_ctrl, +}; + +/* File system interface */ +static const struct v4l2_file_operations usb_ma901radio_fops = { + .owner = THIS_MODULE, + .open = v4l2_fh_open, + .release = v4l2_fh_release, + .poll = v4l2_ctrl_poll, + .unlocked_ioctl = video_ioctl2, +}; + +static const struct v4l2_ioctl_ops usb_ma901radio_ioctl_ops = { + .vidioc_querycap = vidioc_querycap, + .vidioc_g_tuner = vidioc_g_tuner, + .vidioc_s_tuner = vidioc_s_tuner, + .vidioc_g_frequency = vidioc_g_frequency, + .vidioc_s_frequency = vidioc_s_frequency, + .vidioc_log_status = v4l2_ctrl_log_status, + .vidioc_subscribe_event = v4l2_ctrl_subscribe_event, + .vidioc_unsubscribe_event = v4l2_event_unsubscribe, +}; + +static void usb_ma901radio_release(struct v4l2_device *v4l2_dev) +{ + struct ma901radio_device *radio = to_ma901radio_dev(v4l2_dev); + + v4l2_ctrl_handler_free(&radio->hdl); + v4l2_device_unregister(&radio->v4l2_dev); + kfree(radio->buffer); + kfree(radio); +} + +/* check if the device is present and register with v4l and usb if it is */ +static int usb_ma901radio_probe(struct usb_interface *intf, + const struct usb_device_id *id) +{ + struct ma901radio_device *radio; + int retval = 0; + + radio = kzalloc(sizeof(struct ma901radio_device), GFP_KERNEL); + if (!radio) { + dev_err(&intf->dev, "kzalloc for ma901radio_device failed\n"); + retval = -ENOMEM; + goto err; + } + + radio->buffer = kmalloc(BUFFER_LENGTH, GFP_KERNEL); + if (!radio->buffer) { + dev_err(&intf->dev, "kmalloc for radio->buffer failed\n"); + retval = -ENOMEM; + goto err_nobuf; + } + + retval = v4l2_device_register(&intf->dev, &radio->v4l2_dev); + if (retval < 0) { + dev_err(&intf->dev, "couldn't register v4l2_device\n"); + goto err_v4l2; + } + + v4l2_ctrl_handler_init(&radio->hdl, 1); + + /* TODO:It looks like this radio doesn't have mute/unmute control + * and windows program just emulate it using volume control. + * Let's plan to do the same in this driver. + * + * v4l2_ctrl_new_std(&radio->hdl, &usb_ma901radio_ctrl_ops, + * V4L2_CID_AUDIO_MUTE, 0, 1, 1, 1); + */ + + v4l2_ctrl_new_std(&radio->hdl, &usb_ma901radio_ctrl_ops, + V4L2_CID_AUDIO_VOLUME, MA901_VOLUME_MIN, + MA901_VOLUME_MAX, 1, MA901_VOLUME_MAX); + + if (radio->hdl.error) { + retval = radio->hdl.error; + dev_err(&intf->dev, "couldn't register control\n"); + goto err_ctrl; + } + mutex_init(&radio->lock); + + radio->v4l2_dev.ctrl_handler = &radio->hdl; + radio->v4l2_dev.release = usb_ma901radio_release; + strlcpy(radio->vdev.name, radio->v4l2_dev.name, + sizeof(radio->vdev.name)); + radio->vdev.v4l2_dev = &radio->v4l2_dev; + radio->vdev.fops = &usb_ma901radio_fops; + radio->vdev.ioctl_ops = &usb_ma901radio_ioctl_ops; + radio->vdev.release = video_device_release_empty; + radio->vdev.lock = &radio->lock; + set_bit(V4L2_FL_USE_FH_PRIO, &radio->vdev.flags); + + radio->usbdev = interface_to_usbdev(intf); + radio->intf = intf; + usb_set_intfdata(intf, &radio->v4l2_dev); + radio->curfreq = 95.21 * FREQ_MUL; + + video_set_drvdata(&radio->vdev, radio); + + /* TODO: we can get some statistics (freq, volume) from device + * but it's not implemented yet. After insertion in usb-port radio + * setups frequency and starts playing without any initialization. + * So we don't call usb_ma901radio_init/get_stat() here. + * retval = usb_ma901radio_init(radio); + */ + + retval = video_register_device(&radio->vdev, VFL_TYPE_RADIO, + radio_nr); + if (retval < 0) { + dev_err(&intf->dev, "could not register video device\n"); + goto err_vdev; + } + + return 0; + +err_vdev: + v4l2_ctrl_handler_free(&radio->hdl); +err_ctrl: + v4l2_device_unregister(&radio->v4l2_dev); +err_v4l2: + kfree(radio->buffer); +err_nobuf: + kfree(radio); +err: + return retval; +} + +/* USB Device ID List */ +static struct usb_device_id usb_ma901radio_device_table[] = { + { USB_DEVICE_AND_INTERFACE_INFO(USB_MA901_VENDOR, USB_MA901_PRODUCT, + USB_CLASS_HID, 0, 0) }, + { } /* Terminating entry */ +}; + +MODULE_DEVICE_TABLE(usb, usb_ma901radio_device_table); + +/* USB subsystem interface */ +static struct usb_driver usb_ma901radio_driver = { + .name = MA901_DRIVER_NAME, + .probe = usb_ma901radio_probe, + .disconnect = usb_ma901radio_disconnect, + .suspend = usb_ma901radio_suspend, + .resume = usb_ma901radio_resume, + .reset_resume = usb_ma901radio_resume, + .id_table = usb_ma901radio_device_table, +}; + +module_usb_driver(usb_ma901radio_driver); |