diff options
Diffstat (limited to 'drivers/memory/mvebu-devbus.c')
| -rw-r--r-- | drivers/memory/mvebu-devbus.c | 229 |
1 files changed, 154 insertions, 75 deletions
diff --git a/drivers/memory/mvebu-devbus.c b/drivers/memory/mvebu-devbus.c index b59a17fb7c3..ff7138fd66d 100644 --- a/drivers/memory/mvebu-devbus.c +++ b/drivers/memory/mvebu-devbus.c @@ -2,7 +2,7 @@ * Marvell EBU SoC Device Bus Controller * (memory controller for NOR/NAND/SRAM/FPGA devices) * - * Copyright (C) 2013 Marvell + * Copyright (C) 2013-2014 Marvell * * This program is free software: you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -30,19 +30,47 @@ #include <linux/platform_device.h> /* Register definitions */ -#define DEV_WIDTH_BIT 30 -#define BADR_SKEW_BIT 28 -#define RD_HOLD_BIT 23 -#define ACC_NEXT_BIT 17 -#define RD_SETUP_BIT 12 -#define ACC_FIRST_BIT 6 - -#define SYNC_ENABLE_BIT 24 -#define WR_HIGH_BIT 16 -#define WR_LOW_BIT 8 - -#define READ_PARAM_OFFSET 0x0 -#define WRITE_PARAM_OFFSET 0x4 +#define ARMADA_DEV_WIDTH_SHIFT 30 +#define ARMADA_BADR_SKEW_SHIFT 28 +#define ARMADA_RD_HOLD_SHIFT 23 +#define ARMADA_ACC_NEXT_SHIFT 17 +#define ARMADA_RD_SETUP_SHIFT 12 +#define ARMADA_ACC_FIRST_SHIFT 6 + +#define ARMADA_SYNC_ENABLE_SHIFT 24 +#define ARMADA_WR_HIGH_SHIFT 16 +#define ARMADA_WR_LOW_SHIFT 8 + +#define ARMADA_READ_PARAM_OFFSET 0x0 +#define ARMADA_WRITE_PARAM_OFFSET 0x4 + +#define ORION_RESERVED (0x2 << 30) +#define ORION_BADR_SKEW_SHIFT 28 +#define ORION_WR_HIGH_EXT_BIT BIT(27) +#define ORION_WR_HIGH_EXT_MASK 0x8 +#define ORION_WR_LOW_EXT_BIT BIT(26) +#define ORION_WR_LOW_EXT_MASK 0x8 +#define ORION_ALE_WR_EXT_BIT BIT(25) +#define ORION_ALE_WR_EXT_MASK 0x8 +#define ORION_ACC_NEXT_EXT_BIT BIT(24) +#define ORION_ACC_NEXT_EXT_MASK 0x10 +#define ORION_ACC_FIRST_EXT_BIT BIT(23) +#define ORION_ACC_FIRST_EXT_MASK 0x10 +#define ORION_TURN_OFF_EXT_BIT BIT(22) +#define ORION_TURN_OFF_EXT_MASK 0x8 +#define ORION_DEV_WIDTH_SHIFT 20 +#define ORION_WR_HIGH_SHIFT 17 +#define ORION_WR_HIGH_MASK 0x7 +#define ORION_WR_LOW_SHIFT 14 +#define ORION_WR_LOW_MASK 0x7 +#define ORION_ALE_WR_SHIFT 11 +#define ORION_ALE_WR_MASK 0x7 +#define ORION_ACC_NEXT_SHIFT 7 +#define ORION_ACC_NEXT_MASK 0xF +#define ORION_ACC_FIRST_SHIFT 3 +#define ORION_ACC_FIRST_MASK 0xF +#define ORION_TURN_OFF_SHIFT 0 +#define ORION_TURN_OFF_MASK 0x7 struct devbus_read_params { u32 bus_width; @@ -89,19 +117,14 @@ static int get_timing_param_ps(struct devbus *devbus, return 0; } -static int devbus_set_timing_params(struct devbus *devbus, - struct device_node *node) +static int devbus_get_timing_params(struct devbus *devbus, + struct device_node *node, + struct devbus_read_params *r, + struct devbus_write_params *w) { - struct devbus_read_params r; - struct devbus_write_params w; - u32 value; int err; - dev_dbg(devbus->dev, "Setting timing parameter, tick is %lu ps\n", - devbus->tick_ps); - - /* Get read timings */ - err = of_property_read_u32(node, "devbus,bus-width", &r.bus_width); + err = of_property_read_u32(node, "devbus,bus-width", &r->bus_width); if (err < 0) { dev_err(devbus->dev, "%s has no 'devbus,bus-width' property\n", @@ -113,104 +136,148 @@ static int devbus_set_timing_params(struct devbus *devbus, * The bus width is encoded into the register as 0 for 8 bits, * and 1 for 16 bits, so we do the necessary conversion here. */ - if (r.bus_width == 8) - r.bus_width = 0; - else if (r.bus_width == 16) - r.bus_width = 1; + if (r->bus_width == 8) + r->bus_width = 0; + else if (r->bus_width == 16) + r->bus_width = 1; else { - dev_err(devbus->dev, "invalid bus width %d\n", r.bus_width); + dev_err(devbus->dev, "invalid bus width %d\n", r->bus_width); return -EINVAL; } err = get_timing_param_ps(devbus, node, "devbus,badr-skew-ps", - &r.badr_skew); + &r->badr_skew); if (err < 0) return err; err = get_timing_param_ps(devbus, node, "devbus,turn-off-ps", - &r.turn_off); + &r->turn_off); if (err < 0) return err; err = get_timing_param_ps(devbus, node, "devbus,acc-first-ps", - &r.acc_first); + &r->acc_first); if (err < 0) return err; err = get_timing_param_ps(devbus, node, "devbus,acc-next-ps", - &r.acc_next); - if (err < 0) - return err; - - err = get_timing_param_ps(devbus, node, "devbus,rd-setup-ps", - &r.rd_setup); + &r->acc_next); if (err < 0) return err; - err = get_timing_param_ps(devbus, node, "devbus,rd-hold-ps", - &r.rd_hold); - if (err < 0) - return err; - - /* Get write timings */ - err = of_property_read_u32(node, "devbus,sync-enable", - &w.sync_enable); - if (err < 0) { - dev_err(devbus->dev, - "%s has no 'devbus,sync-enable' property\n", - node->full_name); - return err; + if (of_device_is_compatible(devbus->dev->of_node, "marvell,mvebu-devbus")) { + err = get_timing_param_ps(devbus, node, "devbus,rd-setup-ps", + &r->rd_setup); + if (err < 0) + return err; + + err = get_timing_param_ps(devbus, node, "devbus,rd-hold-ps", + &r->rd_hold); + if (err < 0) + return err; + + err = of_property_read_u32(node, "devbus,sync-enable", + &w->sync_enable); + if (err < 0) { + dev_err(devbus->dev, + "%s has no 'devbus,sync-enable' property\n", + node->full_name); + return err; + } } err = get_timing_param_ps(devbus, node, "devbus,ale-wr-ps", - &w.ale_wr); + &w->ale_wr); if (err < 0) return err; err = get_timing_param_ps(devbus, node, "devbus,wr-low-ps", - &w.wr_low); + &w->wr_low); if (err < 0) return err; err = get_timing_param_ps(devbus, node, "devbus,wr-high-ps", - &w.wr_high); + &w->wr_high); if (err < 0) return err; + return 0; +} + +static void devbus_orion_set_timing_params(struct devbus *devbus, + struct device_node *node, + struct devbus_read_params *r, + struct devbus_write_params *w) +{ + u32 value; + + /* + * The hardware designers found it would be a good idea to + * split most of the values in the register into two fields: + * one containing all the low-order bits, and another one + * containing just the high-order bit. For all of those + * fields, we have to split the value into these two parts. + */ + value = (r->turn_off & ORION_TURN_OFF_MASK) << ORION_TURN_OFF_SHIFT | + (r->acc_first & ORION_ACC_FIRST_MASK) << ORION_ACC_FIRST_SHIFT | + (r->acc_next & ORION_ACC_NEXT_MASK) << ORION_ACC_NEXT_SHIFT | + (w->ale_wr & ORION_ALE_WR_MASK) << ORION_ALE_WR_SHIFT | + (w->wr_low & ORION_WR_LOW_MASK) << ORION_WR_LOW_SHIFT | + (w->wr_high & ORION_WR_HIGH_MASK) << ORION_WR_HIGH_SHIFT | + r->bus_width << ORION_DEV_WIDTH_SHIFT | + ((r->turn_off & ORION_TURN_OFF_EXT_MASK) ? ORION_TURN_OFF_EXT_BIT : 0) | + ((r->acc_first & ORION_ACC_FIRST_EXT_MASK) ? ORION_ACC_FIRST_EXT_BIT : 0) | + ((r->acc_next & ORION_ACC_NEXT_EXT_MASK) ? ORION_ACC_NEXT_EXT_BIT : 0) | + ((w->ale_wr & ORION_ALE_WR_EXT_MASK) ? ORION_ALE_WR_EXT_BIT : 0) | + ((w->wr_low & ORION_WR_LOW_EXT_MASK) ? ORION_WR_LOW_EXT_BIT : 0) | + ((w->wr_high & ORION_WR_HIGH_EXT_MASK) ? ORION_WR_HIGH_EXT_BIT : 0) | + (r->badr_skew << ORION_BADR_SKEW_SHIFT) | + ORION_RESERVED; + + writel(value, devbus->base); +} + +static void devbus_armada_set_timing_params(struct devbus *devbus, + struct device_node *node, + struct devbus_read_params *r, + struct devbus_write_params *w) +{ + u32 value; + /* Set read timings */ - value = r.bus_width << DEV_WIDTH_BIT | - r.badr_skew << BADR_SKEW_BIT | - r.rd_hold << RD_HOLD_BIT | - r.acc_next << ACC_NEXT_BIT | - r.rd_setup << RD_SETUP_BIT | - r.acc_first << ACC_FIRST_BIT | - r.turn_off; + value = r->bus_width << ARMADA_DEV_WIDTH_SHIFT | + r->badr_skew << ARMADA_BADR_SKEW_SHIFT | + r->rd_hold << ARMADA_RD_HOLD_SHIFT | + r->acc_next << ARMADA_ACC_NEXT_SHIFT | + r->rd_setup << ARMADA_RD_SETUP_SHIFT | + r->acc_first << ARMADA_ACC_FIRST_SHIFT | + r->turn_off; dev_dbg(devbus->dev, "read parameters register 0x%p = 0x%x\n", - devbus->base + READ_PARAM_OFFSET, + devbus->base + ARMADA_READ_PARAM_OFFSET, value); - writel(value, devbus->base + READ_PARAM_OFFSET); + writel(value, devbus->base + ARMADA_READ_PARAM_OFFSET); /* Set write timings */ - value = w.sync_enable << SYNC_ENABLE_BIT | - w.wr_low << WR_LOW_BIT | - w.wr_high << WR_HIGH_BIT | - w.ale_wr; + value = w->sync_enable << ARMADA_SYNC_ENABLE_SHIFT | + w->wr_low << ARMADA_WR_LOW_SHIFT | + w->wr_high << ARMADA_WR_HIGH_SHIFT | + w->ale_wr; dev_dbg(devbus->dev, "write parameters register: 0x%p = 0x%x\n", - devbus->base + WRITE_PARAM_OFFSET, + devbus->base + ARMADA_WRITE_PARAM_OFFSET, value); - writel(value, devbus->base + WRITE_PARAM_OFFSET); - - return 0; + writel(value, devbus->base + ARMADA_WRITE_PARAM_OFFSET); } static int mvebu_devbus_probe(struct platform_device *pdev) { struct device *dev = &pdev->dev; struct device_node *node = pdev->dev.of_node; + struct devbus_read_params r; + struct devbus_write_params w; struct devbus *devbus; struct resource *res; struct clk *clk; @@ -240,10 +307,21 @@ static int mvebu_devbus_probe(struct platform_device *pdev) rate = clk_get_rate(clk) / 1000; devbus->tick_ps = 1000000000 / rate; - /* Read the device tree node and set the new timing parameters */ - err = devbus_set_timing_params(devbus, node); - if (err < 0) - return err; + dev_dbg(devbus->dev, "Setting timing parameter, tick is %lu ps\n", + devbus->tick_ps); + + if (!of_property_read_bool(node, "devbus,keep-config")) { + /* Read the Device Tree node */ + err = devbus_get_timing_params(devbus, node, &r, &w); + if (err < 0) + return err; + + /* Set the new timing parameters */ + if (of_device_is_compatible(node, "marvell,orion-devbus")) + devbus_orion_set_timing_params(devbus, node, &r, &w); + else + devbus_armada_set_timing_params(devbus, node, &r, &w); + } /* * We need to create a child device explicitly from here to @@ -259,6 +337,7 @@ static int mvebu_devbus_probe(struct platform_device *pdev) static const struct of_device_id mvebu_devbus_of_match[] = { { .compatible = "marvell,mvebu-devbus" }, + { .compatible = "marvell,orion-devbus" }, {}, }; MODULE_DEVICE_TABLE(of, mvebu_devbus_of_match); |