diff options
Diffstat (limited to 'drivers/memstick/host')
-rw-r--r-- | drivers/memstick/host/jmb38x_ms.c | 39 |
1 files changed, 27 insertions, 12 deletions
diff --git a/drivers/memstick/host/jmb38x_ms.c b/drivers/memstick/host/jmb38x_ms.c index 3485c63d20b..2fb95a5b72e 100644 --- a/drivers/memstick/host/jmb38x_ms.c +++ b/drivers/memstick/host/jmb38x_ms.c @@ -81,6 +81,8 @@ struct jmb38x_ms { #define TPC_CODE_SZ_MASK 0x00000700 #define TPC_DATA_SZ_MASK 0x00000007 +#define HOST_CONTROL_TDELAY_EN 0x00040000 +#define HOST_CONTROL_HW_OC_P 0x00010000 #define HOST_CONTROL_RESET_REQ 0x00008000 #define HOST_CONTROL_REI 0x00004000 #define HOST_CONTROL_LED 0x00000400 @@ -88,6 +90,7 @@ struct jmb38x_ms { #define HOST_CONTROL_RESET 0x00000100 #define HOST_CONTROL_POWER_EN 0x00000080 #define HOST_CONTROL_CLOCK_EN 0x00000040 +#define HOST_CONTROL_REO 0x00000008 #define HOST_CONTROL_IF_SHIFT 4 #define HOST_CONTROL_IF_SERIAL 0x0 @@ -133,11 +136,15 @@ struct jmb38x_ms { #define PAD_PU_PD_ON_MS_SOCK1 0x0f0f0000 #define CLOCK_CONTROL_40MHZ 0x00000001 -#define CLOCK_CONTROL_50MHZ 0x00000002 +#define CLOCK_CONTROL_50MHZ 0x0000000a #define CLOCK_CONTROL_60MHZ 0x00000008 #define CLOCK_CONTROL_62_5MHZ 0x0000000c #define CLOCK_CONTROL_OFF 0x00000000 +#define PCI_CTL_CLOCK_DLY_ADDR 0x000000b0 +#define PCI_CTL_CLOCK_DLY_MASK_A 0x00000f00 +#define PCI_CTL_CLOCK_DLY_MASK_B 0x0000f000 + enum { CMD_READY = 0x01, FIFO_READY = 0x02, @@ -367,8 +374,7 @@ static int jmb38x_ms_issue_cmd(struct memstick_host *msh) return host->req->error; } - dev_dbg(&msh->dev, "control %08x\n", - readl(host->addr + HOST_CONTROL)); + dev_dbg(&msh->dev, "control %08x\n", readl(host->addr + HOST_CONTROL)); dev_dbg(&msh->dev, "status %08x\n", readl(host->addr + INT_STATUS)); dev_dbg(&msh->dev, "hstatus %08x\n", readl(host->addr + STATUS)); @@ -637,7 +643,7 @@ static int jmb38x_ms_reset(struct jmb38x_ms_host *host) ndelay(20); } dev_dbg(&host->chip->pdev->dev, "reset_req timeout\n"); - return -EIO; + /* return -EIO; */ reset_next: writel(HOST_CONTROL_RESET | HOST_CONTROL_CLOCK_EN @@ -680,7 +686,9 @@ static int jmb38x_ms_set_param(struct memstick_host *msh, host_ctl = 7; host_ctl |= HOST_CONTROL_POWER_EN - | HOST_CONTROL_CLOCK_EN; + | HOST_CONTROL_CLOCK_EN + | HOST_CONTROL_HW_OC_P + | HOST_CONTROL_TDELAY_EN; writel(host_ctl, host->addr + HOST_CONTROL); writel(host->id ? PAD_PU_PD_ON_MS_SOCK1 @@ -704,33 +712,40 @@ static int jmb38x_ms_set_param(struct memstick_host *msh, break; case MEMSTICK_INTERFACE: host_ctl &= ~(3 << HOST_CONTROL_IF_SHIFT); + pci_read_config_dword(host->chip->pdev, + PCI_CTL_CLOCK_DLY_ADDR, + &clock_delay); + clock_delay &= host->id ? ~PCI_CTL_CLOCK_DLY_MASK_B + : ~PCI_CTL_CLOCK_DLY_MASK_A; if (value == MEMSTICK_SERIAL) { host_ctl &= ~HOST_CONTROL_FAST_CLK; + host_ctl &= ~HOST_CONTROL_REO; host_ctl |= HOST_CONTROL_IF_SERIAL << HOST_CONTROL_IF_SHIFT; host_ctl |= HOST_CONTROL_REI; clock_ctl = CLOCK_CONTROL_40MHZ; - clock_delay = 0; } else if (value == MEMSTICK_PAR4) { - host_ctl |= HOST_CONTROL_FAST_CLK; + host_ctl |= HOST_CONTROL_FAST_CLK | HOST_CONTROL_REO; host_ctl |= HOST_CONTROL_IF_PAR4 << HOST_CONTROL_IF_SHIFT; host_ctl &= ~HOST_CONTROL_REI; clock_ctl = CLOCK_CONTROL_40MHZ; - clock_delay = 4; + clock_delay |= host->id ? (4 << 12) : (4 << 8); } else if (value == MEMSTICK_PAR8) { host_ctl |= HOST_CONTROL_FAST_CLK; host_ctl |= HOST_CONTROL_IF_PAR8 << HOST_CONTROL_IF_SHIFT; - host_ctl &= ~HOST_CONTROL_REI; - clock_ctl = CLOCK_CONTROL_60MHZ; - clock_delay = 0; + host_ctl &= ~(HOST_CONTROL_REI | HOST_CONTROL_REO); + clock_ctl = CLOCK_CONTROL_50MHZ; } else return -EINVAL; + writel(host_ctl, host->addr + HOST_CONTROL); writel(clock_ctl, host->addr + CLOCK_CONTROL); - writel(clock_delay, host->addr + CLOCK_DELAY); + pci_write_config_dword(host->chip->pdev, + PCI_CTL_CLOCK_DLY_ADDR, + clock_delay); break; }; return 0; |