diff options
Diffstat (limited to 'drivers/message/fusion/lsi/mpi_sas.h')
| -rw-r--r-- | drivers/message/fusion/lsi/mpi_sas.h | 171 |
1 files changed, 120 insertions, 51 deletions
diff --git a/drivers/message/fusion/lsi/mpi_sas.h b/drivers/message/fusion/lsi/mpi_sas.h index cb878f9c65d..230fa69b535 100644 --- a/drivers/message/fusion/lsi/mpi_sas.h +++ b/drivers/message/fusion/lsi/mpi_sas.h @@ -1,25 +1,76 @@ /* - * Copyright (c) 2003 LSI Logic Corporation. + * Copyright (c) 2004 LSI Logic Corporation. * * * Name: mpi_sas.h * Title: MPI Serial Attached SCSI structures and definitions - * Creation Date: April 23, 2003 + * Creation Date: August 19, 2004 * - * mpi_sas.h Version: 01.05.xx + * mpi_sas.h Version: 01.05.01 * * Version History * --------------- * * Date Version Description * -------- -------- ------------------------------------------------------ - * xx-yy-zz 01.05.01 Original release. + * 08-19-04 01.05.01 Original release. * -------------------------------------------------------------------------- */ #ifndef MPI_SAS_H #define MPI_SAS_H + +/* + * Values for SASStatus. + */ +#define MPI_SASSTATUS_SUCCESS (0x00) +#define MPI_SASSTATUS_UNKNOWN_ERROR (0x01) +#define MPI_SASSTATUS_INVALID_FRAME (0x02) +#define MPI_SASSTATUS_UTC_BAD_DEST (0x03) +#define MPI_SASSTATUS_UTC_BREAK_RECEIVED (0x04) +#define MPI_SASSTATUS_UTC_CONNECT_RATE_NOT_SUPPORTED (0x05) +#define MPI_SASSTATUS_UTC_PORT_LAYER_REQUEST (0x06) +#define MPI_SASSTATUS_UTC_PROTOCOL_NOT_SUPPORTED (0x07) +#define MPI_SASSTATUS_UTC_STP_RESOURCES_BUSY (0x08) +#define MPI_SASSTATUS_UTC_WRONG_DESTINATION (0x09) +#define MPI_SASSTATUS_SHORT_INFORMATION_UNIT (0x0A) +#define MPI_SASSTATUS_LONG_INFORMATION_UNIT (0x0B) +#define MPI_SASSTATUS_XFER_RDY_INCORRECT_WRITE_DATA (0x0C) +#define MPI_SASSTATUS_XFER_RDY_REQUEST_OFFSET_ERROR (0x0D) +#define MPI_SASSTATUS_XFER_RDY_NOT_EXPECTED (0x0E) +#define MPI_SASSTATUS_DATA_INCORRECT_DATA_LENGTH (0x0F) +#define MPI_SASSTATUS_DATA_TOO_MUCH_READ_DATA (0x10) +#define MPI_SASSTATUS_DATA_OFFSET_ERROR (0x11) +#define MPI_SASSTATUS_SDSF_NAK_RECEIVED (0x12) +#define MPI_SASSTATUS_SDSF_CONNECTION_FAILED (0x13) +#define MPI_SASSTATUS_INITIATOR_RESPONSE_TIMEOUT (0x14) + + +/* + * Values for the SAS DeviceInfo field used in SAS Device Status Change Event + * data and SAS IO Unit Configuration pages. + */ +#define MPI_SAS_DEVICE_INFO_ATAPI_DEVICE (0x00002000) +#define MPI_SAS_DEVICE_INFO_LSI_DEVICE (0x00001000) +#define MPI_SAS_DEVICE_INFO_DIRECT_ATTACH (0x00000800) +#define MPI_SAS_DEVICE_INFO_SSP_TARGET (0x00000400) +#define MPI_SAS_DEVICE_INFO_STP_TARGET (0x00000200) +#define MPI_SAS_DEVICE_INFO_SMP_TARGET (0x00000100) +#define MPI_SAS_DEVICE_INFO_SATA_DEVICE (0x00000080) +#define MPI_SAS_DEVICE_INFO_SSP_INITIATOR (0x00000040) +#define MPI_SAS_DEVICE_INFO_STP_INITIATOR (0x00000020) +#define MPI_SAS_DEVICE_INFO_SMP_INITIATOR (0x00000010) +#define MPI_SAS_DEVICE_INFO_SATA_HOST (0x00000008) + +#define MPI_SAS_DEVICE_INFO_MASK_DEVICE_TYPE (0x00000007) +#define MPI_SAS_DEVICE_INFO_NO_DEVICE (0x00000000) +#define MPI_SAS_DEVICE_INFO_END_DEVICE (0x00000001) +#define MPI_SAS_DEVICE_INFO_EDGE_EXPANDER (0x00000002) +#define MPI_SAS_DEVICE_INFO_FANOUT_EXPANDER (0x00000003) + + + /***************************************************************************** * * S e r i a l A t t a c h e d S C S I M e s s a g e s @@ -48,8 +99,10 @@ typedef struct _MSG_SMP_PASSTHROUGH_REQUEST } MSG_SMP_PASSTHROUGH_REQUEST, MPI_POINTER PTR_MSG_SMP_PASSTHROUGH_REQUEST, SmpPassthroughRequest_t, MPI_POINTER pSmpPassthroughRequest_t; +/* values for PassthroughFlags field */ #define MPI_SMP_PT_REQ_PT_FLAGS_IMMEDIATE (0x80) +/* values for ConnectionRate field */ #define MPI_SMP_PT_REQ_CONNECT_RATE_NEGOTIATED (0x00) #define MPI_SMP_PT_REQ_CONNECT_RATE_1_5 (0x08) #define MPI_SMP_PT_REQ_CONNECT_RATE_3_0 (0x09) @@ -77,51 +130,69 @@ typedef struct _MSG_SMP_PASSTHROUGH_REPLY #define MPI_SMP_PT_REPLY_PT_FLAGS_IMMEDIATE (0x80) -/* values for the SASStatus field */ -#define MPI_SASSTATUS_SUCCESS (0x00) -#define MPI_SASSTATUS_UNKNOWN_ERROR (0x01) -#define MPI_SASSTATUS_INVALID_FRAME (0x02) -#define MPI_SASSTATUS_UTC_BAD_DEST (0x03) -#define MPI_SASSTATUS_UTC_BREAK_RECEIVED (0x04) -#define MPI_SASSTATUS_UTC_CONNECT_RATE_NOT_SUPPORTED (0x05) -#define MPI_SASSTATUS_UTC_PORT_LAYER_REQUEST (0x06) -#define MPI_SASSTATUS_UTC_PROTOCOL_NOT_SUPPORTED (0x07) -#define MPI_SASSTATUS_UTC_STP_RESOURCES_BUSY (0x08) -#define MPI_SASSTATUS_UTC_WRONG_DESTINATION (0x09) -#define MPI_SASSTATUS_SHORT_INFORMATION_UNIT (0x0A) -#define MPI_SASSTATUS_LONG_INFORMATION_UNIT (0x0B) -#define MPI_SASSTATUS_XFER_RDY_INCORRECT_WRITE_DATA (0x0C) -#define MPI_SASSTATUS_XFER_RDY_REQUEST_OFFSET_ERROR (0x0D) -#define MPI_SASSTATUS_XFER_RDY_NOT_EXPECTED (0x0E) -#define MPI_SASSTATUS_DATA_INCORRECT_DATA_LENGTH (0x0F) -#define MPI_SASSTATUS_DATA_TOO_MUCH_READ_DATA (0x10) -#define MPI_SASSTATUS_DATA_OFFSET_ERROR (0x11) -#define MPI_SASSTATUS_SDSF_NAK_RECEIVED (0x12) -#define MPI_SASSTATUS_SDSF_CONNECTION_FAILED (0x13) -#define MPI_SASSTATUS_INITIATOR_RESPONSE_TIMEOUT (0x14) +/****************************************************************************/ +/* SATA Passthrough Request */ +/****************************************************************************/ + +typedef struct _MSG_SATA_PASSTHROUGH_REQUEST +{ + U8 TargetID; /* 00h */ + U8 Bus; /* 01h */ + U8 ChainOffset; /* 02h */ + U8 Function; /* 03h */ + U16 PassthroughFlags; /* 04h */ + U8 ConnectionRate; /* 06h */ + U8 MsgFlags; /* 07h */ + U32 MsgContext; /* 08h */ + U32 Reserved1; /* 0Ch */ + U32 Reserved2; /* 10h */ + U32 Reserved3; /* 14h */ + U32 DataLength; /* 18h */ + U8 CommandFIS[20]; /* 1Ch */ + SGE_SIMPLE_UNION SGL; /* 30h */ +} MSG_SATA_PASSTHROUGH_REQUEST, MPI_POINTER PTR_MSG_SATA_PASSTHROUGH_REQUEST, + SataPassthroughRequest_t, MPI_POINTER pSataPassthroughRequest_t; + +/* values for PassthroughFlags field */ +#define MPI_SATA_PT_REQ_PT_FLAGS_RESET_DEVICE (0x0200) +#define MPI_SATA_PT_REQ_PT_FLAGS_EXECUTE_DIAG (0x0100) +#define MPI_SATA_PT_REQ_PT_FLAGS_DMA_QUEUED (0x0080) +#define MPI_SATA_PT_REQ_PT_FLAGS_PACKET_COMMAND (0x0040) +#define MPI_SATA_PT_REQ_PT_FLAGS_DMA (0x0020) +#define MPI_SATA_PT_REQ_PT_FLAGS_PIO (0x0010) +#define MPI_SATA_PT_REQ_PT_FLAGS_UNSPECIFIED_VU (0x0004) +#define MPI_SATA_PT_REQ_PT_FLAGS_WRITE (0x0002) +#define MPI_SATA_PT_REQ_PT_FLAGS_READ (0x0001) + +/* values for ConnectionRate field */ +#define MPI_SATA_PT_REQ_CONNECT_RATE_NEGOTIATED (0x00) +#define MPI_SATA_PT_REQ_CONNECT_RATE_1_5 (0x08) +#define MPI_SATA_PT_REQ_CONNECT_RATE_3_0 (0x09) + + +/* SATA Passthrough Reply */ +typedef struct _MSG_SATA_PASSTHROUGH_REPLY +{ + U8 TargetID; /* 00h */ + U8 Bus; /* 01h */ + U8 MsgLength; /* 02h */ + U8 Function; /* 03h */ + U16 PassthroughFlags; /* 04h */ + U8 Reserved1; /* 06h */ + U8 MsgFlags; /* 07h */ + U32 MsgContext; /* 08h */ + U8 Reserved2; /* 0Ch */ + U8 SASStatus; /* 0Dh */ + U16 IOCStatus; /* 0Eh */ + U32 IOCLogInfo; /* 10h */ + U8 StatusFIS[20]; /* 14h */ + U32 StatusControlRegisters; /* 28h */ + U32 TransferCount; /* 2Ch */ +} MSG_SATA_PASSTHROUGH_REPLY, MPI_POINTER PTR_MSG_SATA_PASSTHROUGH_REPLY, + SataPassthroughReply_t, MPI_POINTER pSataPassthroughReply_t; -/* - * Values for the SAS DeviceInfo field used in SAS Device Status Change Event - * data and SAS IO Unit Configuration pages. - */ -#define MPI_SAS_DEVICE_INFO_ATAPI_DEVICE (0x00002000) -#define MPI_SAS_DEVICE_INFO_LSI_DEVICE (0x00001000) -#define MPI_SAS_DEVICE_INFO_DIRECT_ATTACH (0x00000800) -#define MPI_SAS_DEVICE_INFO_SSP_TARGET (0x00000400) -#define MPI_SAS_DEVICE_INFO_STP_TARGET (0x00000200) -#define MPI_SAS_DEVICE_INFO_SMP_TARGET (0x00000100) -#define MPI_SAS_DEVICE_INFO_SATA_DEVICE (0x00000080) -#define MPI_SAS_DEVICE_INFO_SSP_INITIATOR (0x00000040) -#define MPI_SAS_DEVICE_INFO_STP_INITIATOR (0x00000020) -#define MPI_SAS_DEVICE_INFO_SMP_INITIATOR (0x00000010) -#define MPI_SAS_DEVICE_INFO_SATA_HOST (0x00000008) -#define MPI_SAS_DEVICE_INFO_MASK_DEVICE_TYPE (0x00000007) -#define MPI_SAS_DEVICE_INFO_NO_DEVICE (0x00000000) -#define MPI_SAS_DEVICE_INFO_END_DEVICE (0x00000001) -#define MPI_SAS_DEVICE_INFO_EDGE_EXPANDER (0x00000002) -#define MPI_SAS_DEVICE_INFO_FANOUT_EXPANDER (0x00000003) /****************************************************************************/ @@ -148,15 +219,13 @@ typedef struct _MSG_SAS_IOUNIT_CONTROL_REQUEST } MSG_SAS_IOUNIT_CONTROL_REQUEST, MPI_POINTER PTR_MSG_SAS_IOUNIT_CONTROL_REQUEST, SasIoUnitControlRequest_t, MPI_POINTER pSasIoUnitControlRequest_t; -/* values for the ... field */ +/* values for the Operation field */ #define MPI_SAS_OP_CLEAR_NOT_PRESENT (0x01) -#define MPI_SAS_OP_CLEAR_ALL (0x02) -#define MPI_SAS_OP_MAP (0x03) -#define MPI_SAS_OP_MOVE (0x04) -#define MPI_SAS_OP_CLEAR (0x05) +#define MPI_SAS_OP_CLEAR_ALL_PERSISTENT (0x02) #define MPI_SAS_OP_PHY_LINK_RESET (0x06) #define MPI_SAS_OP_PHY_HARD_RESET (0x07) #define MPI_SAS_OP_PHY_CLEAR_ERROR_LOG (0x08) +#define MPI_SAS_OP_MAP_CURRENT (0x09) /* SAS IO Unit Control Reply */ |