diff options
Diffstat (limited to 'drivers/message/fusion/mptbase.c')
-rw-r--r-- | drivers/message/fusion/mptbase.c | 251 |
1 files changed, 127 insertions, 124 deletions
diff --git a/drivers/message/fusion/mptbase.c b/drivers/message/fusion/mptbase.c index b88a244a1ed..3e57b61ca44 100644 --- a/drivers/message/fusion/mptbase.c +++ b/drivers/message/fusion/mptbase.c @@ -50,6 +50,7 @@ #include <linux/module.h> #include <linux/errno.h> #include <linux/init.h> +#include <linux/seq_file.h> #include <linux/slab.h> #include <linux/types.h> #include <linux/pci.h> @@ -109,8 +110,7 @@ MODULE_PARM_DESC(mpt_debug_level, " debug level - refer to mptdebug.h \ int mpt_fwfault_debug; EXPORT_SYMBOL(mpt_fwfault_debug); -module_param_call(mpt_fwfault_debug, param_set_int, param_get_int, - &mpt_fwfault_debug, 0600); +module_param(mpt_fwfault_debug, int, 0600); MODULE_PARM_DESC(mpt_fwfault_debug, "Enable detection of Firmware fault" " and halt Firmware on fault - (default=0)"); @@ -200,12 +200,9 @@ static int mpt_host_page_access_control(MPT_ADAPTER *ioc, u8 access_control_valu static int mpt_host_page_alloc(MPT_ADAPTER *ioc, pIOCInit_t ioc_init); #ifdef CONFIG_PROC_FS -static int procmpt_summary_read(char *buf, char **start, off_t offset, - int request, int *eof, void *data); -static int procmpt_version_read(char *buf, char **start, off_t offset, - int request, int *eof, void *data); -static int procmpt_iocinfo_read(char *buf, char **start, off_t offset, - int request, int *eof, void *data); +static const struct file_operations mpt_summary_proc_fops; +static const struct file_operations mpt_version_proc_fops; +static const struct file_operations mpt_iocinfo_proc_fops; #endif static void mpt_get_fw_exp_ver(char *buf, MPT_ADAPTER *ioc); @@ -629,6 +626,7 @@ mptbase_reply(MPT_ADAPTER *ioc, MPT_FRAME_HDR *req, MPT_FRAME_HDR *reply) * mpt_register - Register protocol-specific main callback handler. * @cbfunc: callback function pointer * @dclass: Protocol driver's class (%MPT_DRIVER_CLASS enum value) + * @func_name: call function's name * * This routine is called by a protocol-specific driver (SCSI host, * LAN, SCSI target) to register its reply callback routine. Each @@ -1725,7 +1723,7 @@ mpt_attach(struct pci_dev *pdev, const struct pci_device_id *id) u8 pcixcmd; static int mpt_ids = 0; #ifdef CONFIG_PROC_FS - struct proc_dir_entry *dent, *ent; + struct proc_dir_entry *dent; #endif ioc = kzalloc(sizeof(MPT_ADAPTER), GFP_ATOMIC); @@ -1980,16 +1978,8 @@ mpt_attach(struct pci_dev *pdev, const struct pci_device_id *id) */ dent = proc_mkdir(ioc->name, mpt_proc_root_dir); if (dent) { - ent = create_proc_entry("info", S_IFREG|S_IRUGO, dent); - if (ent) { - ent->read_proc = procmpt_iocinfo_read; - ent->data = ioc; - } - ent = create_proc_entry("summary", S_IFREG|S_IRUGO, dent); - if (ent) { - ent->read_proc = procmpt_summary_read; - ent->data = ioc; - } + proc_create_data("info", S_IRUGO, dent, &mpt_iocinfo_proc_fops, ioc); + proc_create_data("summary", S_IRUGO, dent, &mpt_summary_proc_fops, ioc); } #endif @@ -5955,8 +5945,10 @@ mpt_findImVolumes(MPT_ADAPTER *ioc) goto out; mem = kmalloc(iocpage2sz, GFP_KERNEL); - if (!mem) + if (!mem) { + rc = -ENOMEM; goto out; + } memcpy(mem, (u8 *)pIoc2, iocpage2sz); ioc->raid_data.pIocPg2 = (IOCPage2_t *) mem; @@ -6546,20 +6538,12 @@ mpt_ioc_reset(MPT_ADAPTER *ioc, int reset_phase) static int procmpt_create(void) { - struct proc_dir_entry *ent; - mpt_proc_root_dir = proc_mkdir(MPT_PROCFS_MPTBASEDIR, NULL); if (mpt_proc_root_dir == NULL) return -ENOTDIR; - ent = create_proc_entry("summary", S_IFREG|S_IRUGO, mpt_proc_root_dir); - if (ent) - ent->read_proc = procmpt_summary_read; - - ent = create_proc_entry("version", S_IFREG|S_IRUGO, mpt_proc_root_dir); - if (ent) - ent->read_proc = procmpt_version_read; - + proc_create("summary", S_IRUGO, mpt_proc_root_dir, &mpt_summary_proc_fops); + proc_create("version", S_IRUGO, mpt_proc_root_dir, &mpt_version_proc_fops); return 0; } @@ -6578,71 +6562,47 @@ procmpt_destroy(void) } /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ -/** - * procmpt_summary_read - Handle read request of a summary file - * @buf: Pointer to area to write information - * @start: Pointer to start pointer - * @offset: Offset to start writing - * @request: Amount of read data requested - * @eof: Pointer to EOF integer - * @data: Pointer - * +/* * Handles read request from /proc/mpt/summary or /proc/mpt/iocN/summary. - * Returns number of characters written to process performing the read. */ -static int -procmpt_summary_read(char *buf, char **start, off_t offset, int request, int *eof, void *data) -{ - MPT_ADAPTER *ioc; - char *out = buf; - int len; +static void seq_mpt_print_ioc_summary(MPT_ADAPTER *ioc, struct seq_file *m, int showlan); - if (data) { - int more = 0; - - ioc = data; - mpt_print_ioc_summary(ioc, out, &more, 0, 1); +static int mpt_summary_proc_show(struct seq_file *m, void *v) +{ + MPT_ADAPTER *ioc = m->private; - out += more; + if (ioc) { + seq_mpt_print_ioc_summary(ioc, m, 1); } else { list_for_each_entry(ioc, &ioc_list, list) { - int more = 0; - - mpt_print_ioc_summary(ioc, out, &more, 0, 1); - - out += more; - if ((out-buf) >= request) - break; + seq_mpt_print_ioc_summary(ioc, m, 1); } } - len = out - buf; + return 0; +} - MPT_PROC_READ_RETURN(buf,start,offset,request,eof,len); +static int mpt_summary_proc_open(struct inode *inode, struct file *file) +{ + return single_open(file, mpt_summary_proc_show, PDE(inode)->data); } -/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ -/** - * procmpt_version_read - Handle read request from /proc/mpt/version. - * @buf: Pointer to area to write information - * @start: Pointer to start pointer - * @offset: Offset to start writing - * @request: Amount of read data requested - * @eof: Pointer to EOF integer - * @data: Pointer - * - * Returns number of characters written to process performing the read. - */ -static int -procmpt_version_read(char *buf, char **start, off_t offset, int request, int *eof, void *data) +static const struct file_operations mpt_summary_proc_fops = { + .owner = THIS_MODULE, + .open = mpt_summary_proc_open, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, +}; + +static int mpt_version_proc_show(struct seq_file *m, void *v) { u8 cb_idx; int scsi, fc, sas, lan, ctl, targ, dmp; char *drvname; - int len; - len = sprintf(buf, "%s-%s\n", "mptlinux", MPT_LINUX_VERSION_COMMON); - len += sprintf(buf+len, " Fusion MPT base driver\n"); + seq_printf(m, "%s-%s\n", "mptlinux", MPT_LINUX_VERSION_COMMON); + seq_printf(m, " Fusion MPT base driver\n"); scsi = fc = sas = lan = ctl = targ = dmp = 0; for (cb_idx = MPT_MAX_PROTOCOL_DRIVERS-1; cb_idx; cb_idx--) { @@ -6670,98 +6630,97 @@ procmpt_version_read(char *buf, char **start, off_t offset, int request, int *eo } if (drvname) - len += sprintf(buf+len, " Fusion MPT %s driver\n", drvname); + seq_printf(m, " Fusion MPT %s driver\n", drvname); } } - MPT_PROC_READ_RETURN(buf,start,offset,request,eof,len); + return 0; } -/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ -/** - * procmpt_iocinfo_read - Handle read request from /proc/mpt/iocN/info. - * @buf: Pointer to area to write information - * @start: Pointer to start pointer - * @offset: Offset to start writing - * @request: Amount of read data requested - * @eof: Pointer to EOF integer - * @data: Pointer - * - * Returns number of characters written to process performing the read. - */ -static int -procmpt_iocinfo_read(char *buf, char **start, off_t offset, int request, int *eof, void *data) +static int mpt_version_proc_open(struct inode *inode, struct file *file) { - MPT_ADAPTER *ioc = data; - int len; + return single_open(file, mpt_version_proc_show, NULL); +} + +static const struct file_operations mpt_version_proc_fops = { + .owner = THIS_MODULE, + .open = mpt_version_proc_open, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, +}; + +static int mpt_iocinfo_proc_show(struct seq_file *m, void *v) +{ + MPT_ADAPTER *ioc = m->private; char expVer[32]; int sz; int p; mpt_get_fw_exp_ver(expVer, ioc); - len = sprintf(buf, "%s:", ioc->name); + seq_printf(m, "%s:", ioc->name); if (ioc->facts.Flags & MPI_IOCFACTS_FLAGS_FW_DOWNLOAD_BOOT) - len += sprintf(buf+len, " (f/w download boot flag set)"); + seq_printf(m, " (f/w download boot flag set)"); // if (ioc->facts.IOCExceptions & MPI_IOCFACTS_EXCEPT_CONFIG_CHECKSUM_FAIL) -// len += sprintf(buf+len, " CONFIG_CHECKSUM_FAIL!"); +// seq_printf(m, " CONFIG_CHECKSUM_FAIL!"); - len += sprintf(buf+len, "\n ProductID = 0x%04x (%s)\n", + seq_printf(m, "\n ProductID = 0x%04x (%s)\n", ioc->facts.ProductID, ioc->prod_name); - len += sprintf(buf+len, " FWVersion = 0x%08x%s", ioc->facts.FWVersion.Word, expVer); + seq_printf(m, " FWVersion = 0x%08x%s", ioc->facts.FWVersion.Word, expVer); if (ioc->facts.FWImageSize) - len += sprintf(buf+len, " (fw_size=%d)", ioc->facts.FWImageSize); - len += sprintf(buf+len, "\n MsgVersion = 0x%04x\n", ioc->facts.MsgVersion); - len += sprintf(buf+len, " FirstWhoInit = 0x%02x\n", ioc->FirstWhoInit); - len += sprintf(buf+len, " EventState = 0x%02x\n", ioc->facts.EventState); + seq_printf(m, " (fw_size=%d)", ioc->facts.FWImageSize); + seq_printf(m, "\n MsgVersion = 0x%04x\n", ioc->facts.MsgVersion); + seq_printf(m, " FirstWhoInit = 0x%02x\n", ioc->FirstWhoInit); + seq_printf(m, " EventState = 0x%02x\n", ioc->facts.EventState); - len += sprintf(buf+len, " CurrentHostMfaHighAddr = 0x%08x\n", + seq_printf(m, " CurrentHostMfaHighAddr = 0x%08x\n", ioc->facts.CurrentHostMfaHighAddr); - len += sprintf(buf+len, " CurrentSenseBufferHighAddr = 0x%08x\n", + seq_printf(m, " CurrentSenseBufferHighAddr = 0x%08x\n", ioc->facts.CurrentSenseBufferHighAddr); - len += sprintf(buf+len, " MaxChainDepth = 0x%02x frames\n", ioc->facts.MaxChainDepth); - len += sprintf(buf+len, " MinBlockSize = 0x%02x bytes\n", 4*ioc->facts.BlockSize); + seq_printf(m, " MaxChainDepth = 0x%02x frames\n", ioc->facts.MaxChainDepth); + seq_printf(m, " MinBlockSize = 0x%02x bytes\n", 4*ioc->facts.BlockSize); - len += sprintf(buf+len, " RequestFrames @ 0x%p (Dma @ 0x%p)\n", + seq_printf(m, " RequestFrames @ 0x%p (Dma @ 0x%p)\n", (void *)ioc->req_frames, (void *)(ulong)ioc->req_frames_dma); /* * Rounding UP to nearest 4-kB boundary here... */ sz = (ioc->req_sz * ioc->req_depth) + 128; sz = ((sz + 0x1000UL - 1UL) / 0x1000) * 0x1000; - len += sprintf(buf+len, " {CurReqSz=%d} x {CurReqDepth=%d} = %d bytes ^= 0x%x\n", + seq_printf(m, " {CurReqSz=%d} x {CurReqDepth=%d} = %d bytes ^= 0x%x\n", ioc->req_sz, ioc->req_depth, ioc->req_sz*ioc->req_depth, sz); - len += sprintf(buf+len, " {MaxReqSz=%d} {MaxReqDepth=%d}\n", + seq_printf(m, " {MaxReqSz=%d} {MaxReqDepth=%d}\n", 4*ioc->facts.RequestFrameSize, ioc->facts.GlobalCredits); - len += sprintf(buf+len, " Frames @ 0x%p (Dma @ 0x%p)\n", + seq_printf(m, " Frames @ 0x%p (Dma @ 0x%p)\n", (void *)ioc->alloc, (void *)(ulong)ioc->alloc_dma); sz = (ioc->reply_sz * ioc->reply_depth) + 128; - len += sprintf(buf+len, " {CurRepSz=%d} x {CurRepDepth=%d} = %d bytes ^= 0x%x\n", + seq_printf(m, " {CurRepSz=%d} x {CurRepDepth=%d} = %d bytes ^= 0x%x\n", ioc->reply_sz, ioc->reply_depth, ioc->reply_sz*ioc->reply_depth, sz); - len += sprintf(buf+len, " {MaxRepSz=%d} {MaxRepDepth=%d}\n", + seq_printf(m, " {MaxRepSz=%d} {MaxRepDepth=%d}\n", ioc->facts.CurReplyFrameSize, ioc->facts.ReplyQueueDepth); - len += sprintf(buf+len, " MaxDevices = %d\n", + seq_printf(m, " MaxDevices = %d\n", (ioc->facts.MaxDevices==0) ? 255 : ioc->facts.MaxDevices); - len += sprintf(buf+len, " MaxBuses = %d\n", ioc->facts.MaxBuses); + seq_printf(m, " MaxBuses = %d\n", ioc->facts.MaxBuses); /* per-port info */ for (p=0; p < ioc->facts.NumberOfPorts; p++) { - len += sprintf(buf+len, " PortNumber = %d (of %d)\n", + seq_printf(m, " PortNumber = %d (of %d)\n", p+1, ioc->facts.NumberOfPorts); if (ioc->bus_type == FC) { if (ioc->pfacts[p].ProtocolFlags & MPI_PORTFACTS_PROTOCOL_LAN) { u8 *a = (u8*)&ioc->lan_cnfg_page1.HardwareAddressLow; - len += sprintf(buf+len, " LanAddr = %02X:%02X:%02X:%02X:%02X:%02X\n", + seq_printf(m, " LanAddr = %02X:%02X:%02X:%02X:%02X:%02X\n", a[5], a[4], a[3], a[2], a[1], a[0]); } - len += sprintf(buf+len, " WWN = %08X%08X:%08X%08X\n", + seq_printf(m, " WWN = %08X%08X:%08X%08X\n", ioc->fc_port_page0[p].WWNN.High, ioc->fc_port_page0[p].WWNN.Low, ioc->fc_port_page0[p].WWPN.High, @@ -6769,9 +6728,21 @@ procmpt_iocinfo_read(char *buf, char **start, off_t offset, int request, int *eo } } - MPT_PROC_READ_RETURN(buf,start,offset,request,eof,len); + return 0; +} + +static int mpt_iocinfo_proc_open(struct inode *inode, struct file *file) +{ + return single_open(file, mpt_iocinfo_proc_show, PDE(inode)->data); } +static const struct file_operations mpt_iocinfo_proc_fops = { + .owner = THIS_MODULE, + .open = mpt_iocinfo_proc_open, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, +}; #endif /* CONFIG_PROC_FS } */ /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ @@ -6837,6 +6808,39 @@ mpt_print_ioc_summary(MPT_ADAPTER *ioc, char *buffer, int *size, int len, int sh *size = y; } + +static void seq_mpt_print_ioc_summary(MPT_ADAPTER *ioc, struct seq_file *m, int showlan) +{ + char expVer[32]; + + mpt_get_fw_exp_ver(expVer, ioc); + + /* + * Shorter summary of attached ioc's... + */ + seq_printf(m, "%s: %s, %s%08xh%s, Ports=%d, MaxQ=%d", + ioc->name, + ioc->prod_name, + MPT_FW_REV_MAGIC_ID_STRING, /* "FwRev=" or somesuch */ + ioc->facts.FWVersion.Word, + expVer, + ioc->facts.NumberOfPorts, + ioc->req_depth); + + if (showlan && (ioc->pfacts[0].ProtocolFlags & MPI_PORTFACTS_PROTOCOL_LAN)) { + u8 *a = (u8*)&ioc->lan_cnfg_page1.HardwareAddressLow; + seq_printf(m, ", LanAddr=%02X:%02X:%02X:%02X:%02X:%02X", + a[5], a[4], a[3], a[2], a[1], a[0]); + } + + seq_printf(m, ", IRQ=%d", ioc->pci_irq); + + if (!ioc->active) + seq_printf(m, " (disabled)"); + + seq_putc(m, '\n'); +} + /** * mpt_set_taskmgmt_in_progress_flag - set flags associated with task management * @ioc: Pointer to MPT_ADAPTER structure @@ -6922,7 +6926,6 @@ EXPORT_SYMBOL(mpt_halt_firmware); * mpt_SoftResetHandler - Issues a less expensive reset * @ioc: Pointer to MPT_ADAPTER structure * @sleepFlag: Indicates if sleep or schedule must be called. - * * Returns 0 for SUCCESS or -1 if FAILED. * @@ -7067,7 +7070,6 @@ mpt_SoftResetHandler(MPT_ADAPTER *ioc, int sleepFlag) * mpt_Soft_Hard_ResetHandler - Try less expensive reset * @ioc: Pointer to MPT_ADAPTER structure * @sleepFlag: Indicates if sleep or schedule must be called. - * * Returns 0 for SUCCESS or -1 if FAILED. * Try for softreset first, only if it fails go for expensive @@ -8004,6 +8006,7 @@ mpt_spi_log_info(MPT_ADAPTER *ioc, u32 log_info) * mpt_sas_log_info - Log information returned from SAS IOC. * @ioc: Pointer to MPT_ADAPTER structure * @log_info: U32 LogInfo reply word from the IOC + * @cb_idx: callback function's handle * * Refer to lsi/mpi_log_sas.h. **/ @@ -8050,7 +8053,7 @@ union loginfo_type { code_desc = ir_code_str[sas_loginfo.dw.code]; if (sas_loginfo.dw.subcode >= ARRAY_SIZE(raid_sub_code_str)) - break; + break; if (sas_loginfo.dw.code == 0) sub_code_desc = raid_sub_code_str[sas_loginfo.dw.subcode]; |