diff options
Diffstat (limited to 'drivers/message/fusion/mptbase.c')
-rw-r--r-- | drivers/message/fusion/mptbase.c | 112 |
1 files changed, 0 insertions, 112 deletions
diff --git a/drivers/message/fusion/mptbase.c b/drivers/message/fusion/mptbase.c index 164375eea89..330c29080e3 100644 --- a/drivers/message/fusion/mptbase.c +++ b/drivers/message/fusion/mptbase.c @@ -1188,7 +1188,6 @@ mpt_attach(struct pci_dev *pdev, const struct pci_device_id *id) ioc->pcidev = pdev; ioc->diagPending = 0; spin_lock_init(&ioc->diagLock); - spin_lock_init(&ioc->fc_rescan_work_lock); spin_lock_init(&ioc->initializing_hba_lock); /* Initialize the event logging. @@ -1847,14 +1846,6 @@ mpt_do_ioc_recovery(MPT_ADAPTER *ioc, u32 reason, int sleepFlag) mpt_findImVolumes(ioc); } else if (ioc->bus_type == FC) { - /* - * Pre-fetch FC port WWN and stuff... - * (FCPortPage0_t stuff) - */ - for (ii=0; ii < ioc->facts.NumberOfPorts; ii++) { - (void) mptbase_GetFcPortPage0(ioc, ii); - } - if ((ioc->pfacts[0].ProtocolFlags & MPI_PORTFACTS_PROTOCOL_LAN) && (ioc->lan_cnfg_page0.Header.PageLength == 0)) { /* @@ -4186,108 +4177,6 @@ GetLanConfigPages(MPT_ADAPTER *ioc) /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ /* - * mptbase_GetFcPortPage0 - Fetch FCPort config Page0. - * @ioc: Pointer to MPT_ADAPTER structure - * @portnum: IOC Port number - * - * Return: 0 for success - * -ENOMEM if no memory available - * -EPERM if not allowed due to ISR context - * -EAGAIN if no msg frames currently available - * -EFAULT for non-successful reply or no reply (timeout) - */ -int -mptbase_GetFcPortPage0(MPT_ADAPTER *ioc, int portnum) -{ - ConfigPageHeader_t hdr; - CONFIGPARMS cfg; - FCPortPage0_t *ppage0_alloc; - FCPortPage0_t *pp0dest; - dma_addr_t page0_dma; - int data_sz; - int copy_sz; - int rc; - int count = 400; - - - /* Get FCPort Page 0 header */ - hdr.PageVersion = 0; - hdr.PageLength = 0; - hdr.PageNumber = 0; - hdr.PageType = MPI_CONFIG_PAGETYPE_FC_PORT; - cfg.cfghdr.hdr = &hdr; - cfg.physAddr = -1; - cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER; - cfg.dir = 0; - cfg.pageAddr = portnum; - cfg.timeout = 0; - - if ((rc = mpt_config(ioc, &cfg)) != 0) - return rc; - - if (hdr.PageLength == 0) - return 0; - - data_sz = hdr.PageLength * 4; - rc = -ENOMEM; - ppage0_alloc = (FCPortPage0_t *) pci_alloc_consistent(ioc->pcidev, data_sz, &page0_dma); - if (ppage0_alloc) { - - try_again: - memset((u8 *)ppage0_alloc, 0, data_sz); - cfg.physAddr = page0_dma; - cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT; - - if ((rc = mpt_config(ioc, &cfg)) == 0) { - /* save the data */ - pp0dest = &ioc->fc_port_page0[portnum]; - copy_sz = min_t(int, sizeof(FCPortPage0_t), data_sz); - memcpy(pp0dest, ppage0_alloc, copy_sz); - - /* - * Normalize endianness of structure data, - * by byte-swapping all > 1 byte fields! - */ - pp0dest->Flags = le32_to_cpu(pp0dest->Flags); - pp0dest->PortIdentifier = le32_to_cpu(pp0dest->PortIdentifier); - pp0dest->WWNN.Low = le32_to_cpu(pp0dest->WWNN.Low); - pp0dest->WWNN.High = le32_to_cpu(pp0dest->WWNN.High); - pp0dest->WWPN.Low = le32_to_cpu(pp0dest->WWPN.Low); - pp0dest->WWPN.High = le32_to_cpu(pp0dest->WWPN.High); - pp0dest->SupportedServiceClass = le32_to_cpu(pp0dest->SupportedServiceClass); - pp0dest->SupportedSpeeds = le32_to_cpu(pp0dest->SupportedSpeeds); - pp0dest->CurrentSpeed = le32_to_cpu(pp0dest->CurrentSpeed); - pp0dest->MaxFrameSize = le32_to_cpu(pp0dest->MaxFrameSize); - pp0dest->FabricWWNN.Low = le32_to_cpu(pp0dest->FabricWWNN.Low); - pp0dest->FabricWWNN.High = le32_to_cpu(pp0dest->FabricWWNN.High); - pp0dest->FabricWWPN.Low = le32_to_cpu(pp0dest->FabricWWPN.Low); - pp0dest->FabricWWPN.High = le32_to_cpu(pp0dest->FabricWWPN.High); - pp0dest->DiscoveredPortsCount = le32_to_cpu(pp0dest->DiscoveredPortsCount); - pp0dest->MaxInitiators = le32_to_cpu(pp0dest->MaxInitiators); - - /* - * if still doing discovery, - * hang loose a while until finished - */ - if (pp0dest->PortState == MPI_FCPORTPAGE0_PORTSTATE_UNKNOWN) { - if (count-- > 0) { - msleep_interruptible(100); - goto try_again; - } - printk(MYIOC_s_INFO_FMT "Firmware discovery not" - " complete.\n", - ioc->name); - } - } - - pci_free_consistent(ioc->pcidev, data_sz, (u8 *) ppage0_alloc, page0_dma); - } - - return rc; -} - -/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ -/* * mptbase_sas_persist_operation - Perform operation on SAS Persitent Table * @ioc: Pointer to MPT_ADAPTER structure * @sas_address: 64bit SAS Address for operation. @@ -6495,7 +6384,6 @@ EXPORT_SYMBOL(mpt_findImVolumes); EXPORT_SYMBOL(mpt_alloc_fw_memory); EXPORT_SYMBOL(mpt_free_fw_memory); EXPORT_SYMBOL(mptbase_sas_persist_operation); -EXPORT_SYMBOL(mptbase_GetFcPortPage0); /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ |