diff options
Diffstat (limited to 'drivers/message/fusion/mptbase.c')
-rw-r--r-- | drivers/message/fusion/mptbase.c | 62 |
1 files changed, 44 insertions, 18 deletions
diff --git a/drivers/message/fusion/mptbase.c b/drivers/message/fusion/mptbase.c index 4262a22adc2..d890b2b8a93 100644 --- a/drivers/message/fusion/mptbase.c +++ b/drivers/message/fusion/mptbase.c @@ -148,7 +148,6 @@ static int WaitForDoorbellAck(MPT_ADAPTER *ioc, int howlong, int sleepFlag); static int WaitForDoorbellInt(MPT_ADAPTER *ioc, int howlong, int sleepFlag); static int WaitForDoorbellReply(MPT_ADAPTER *ioc, int howlong, int sleepFlag); static int GetLanConfigPages(MPT_ADAPTER *ioc); -static int GetFcPortPage0(MPT_ADAPTER *ioc, int portnum); static int GetIoUnitPage2(MPT_ADAPTER *ioc); int mptbase_sas_persist_operation(MPT_ADAPTER *ioc, u8 persist_opcode); static int mpt_GetScsiPortSettings(MPT_ADAPTER *ioc, int portnum); @@ -313,13 +312,13 @@ mpt_reply(MPT_ADAPTER *ioc, u32 pa) u32 log_info = le32_to_cpu(mr->u.reply.IOCLogInfo); if (ioc->bus_type == FC) mpt_fc_log_info(ioc, log_info); - else if (ioc->bus_type == SCSI) + else if (ioc->bus_type == SPI) mpt_sp_log_info(ioc, log_info); else if (ioc->bus_type == SAS) mpt_sas_log_info(ioc, log_info); } if (ioc_stat & MPI_IOCSTATUS_MASK) { - if (ioc->bus_type == SCSI && + if (ioc->bus_type == SPI && cb_idx != mpt_stm_index && cb_idx != mpt_lan_index) mpt_sp_ioc_info(ioc, (u32)ioc_stat, mf); @@ -1232,12 +1231,11 @@ mpt_attach(struct pci_dev *pdev, const struct pci_device_id *id) dprintk((KERN_INFO MYNAM ": Not using 64 bit consistent mask\n")); - ioc = kmalloc(sizeof(MPT_ADAPTER), GFP_ATOMIC); + ioc = kzalloc(sizeof(MPT_ADAPTER), GFP_ATOMIC); if (ioc == NULL) { printk(KERN_ERR MYNAM ": ERROR - Insufficient memory to add adapter!\n"); return -ENOMEM; } - memset(ioc, 0, sizeof(MPT_ADAPTER)); ioc->alloc_total = sizeof(MPT_ADAPTER); ioc->req_sz = MPT_DEFAULT_FRAME_SIZE; /* avoid div by zero! */ ioc->reply_sz = MPT_REPLY_FRAME_SIZE; @@ -1245,6 +1243,8 @@ mpt_attach(struct pci_dev *pdev, const struct pci_device_id *id) ioc->pcidev = pdev; ioc->diagPending = 0; spin_lock_init(&ioc->diagLock); + spin_lock_init(&ioc->fc_rescan_work_lock); + spin_lock_init(&ioc->fc_rport_lock); spin_lock_init(&ioc->initializing_hba_lock); /* Initialize the event logging. @@ -1268,6 +1268,10 @@ mpt_attach(struct pci_dev *pdev, const struct pci_device_id *id) */ INIT_LIST_HEAD(&ioc->configQ); + /* Initialize the fc rport list head. + */ + INIT_LIST_HEAD(&ioc->fc_rports); + /* Find lookup slot. */ INIT_LIST_HEAD(&ioc->list); ioc->id = mpt_ids++; @@ -1374,9 +1378,13 @@ mpt_attach(struct pci_dev *pdev, const struct pci_device_id *id) ioc->bus_type = FC; ioc->errata_flag_1064 = 1; } + else if (pdev->device == MPI_MANUFACTPAGE_DEVICEID_FC949E) { + ioc->prod_name = "LSIFC949E"; + ioc->bus_type = FC; + } else if (pdev->device == MPI_MANUFACTPAGE_DEVID_53C1030) { ioc->prod_name = "LSI53C1030"; - ioc->bus_type = SCSI; + ioc->bus_type = SPI; /* 1030 Chip Fix. Disable Split transactions * for PCIX. Set MOST bits to zero if Rev < C0( = 8). */ @@ -1389,7 +1397,7 @@ mpt_attach(struct pci_dev *pdev, const struct pci_device_id *id) } else if (pdev->device == MPI_MANUFACTPAGE_DEVID_1030_53C1035) { ioc->prod_name = "LSI53C1035"; - ioc->bus_type = SCSI; + ioc->bus_type = SPI; } else if (pdev->device == MPI_MANUFACTPAGE_DEVID_SAS1064) { ioc->prod_name = "LSISAS1064"; @@ -1622,7 +1630,7 @@ mpt_resume(struct pci_dev *pdev) pci_enable_device(pdev); /* enable interrupts */ - CHIPREG_WRITE32(&ioc->chip->IntMask, ~(MPI_HIM_RIM)); + CHIPREG_WRITE32(&ioc->chip->IntMask, MPI_HIM_DIM); ioc->active = 1; /* F/W not running */ @@ -1715,7 +1723,7 @@ mpt_do_ioc_recovery(MPT_ADAPTER *ioc, u32 reason, int sleepFlag) /* (re)Enable alt-IOC! (reply interrupt, FreeQ) */ dprintk((KERN_INFO MYNAM ": alt-%s reply irq re-enabled\n", ioc->alt_ioc->name)); - CHIPREG_WRITE32(&ioc->alt_ioc->chip->IntMask, ~(MPI_HIM_RIM)); + CHIPREG_WRITE32(&ioc->alt_ioc->chip->IntMask, MPI_HIM_DIM); ioc->alt_ioc->active = 1; } @@ -1831,7 +1839,7 @@ mpt_do_ioc_recovery(MPT_ADAPTER *ioc, u32 reason, int sleepFlag) if (ret == 0) { /* Enable! (reply interrupt) */ - CHIPREG_WRITE32(&ioc->chip->IntMask, ~(MPI_HIM_RIM)); + CHIPREG_WRITE32(&ioc->chip->IntMask, MPI_HIM_DIM); ioc->active = 1; } @@ -1839,7 +1847,7 @@ mpt_do_ioc_recovery(MPT_ADAPTER *ioc, u32 reason, int sleepFlag) /* (re)Enable alt-IOC! (reply interrupt) */ dinitprintk((KERN_INFO MYNAM ": alt-%s reply irq re-enabled\n", ioc->alt_ioc->name)); - CHIPREG_WRITE32(&ioc->alt_ioc->chip->IntMask, ~(MPI_HIM_RIM)); + CHIPREG_WRITE32(&ioc->alt_ioc->chip->IntMask, MPI_HIM_DIM); ioc->alt_ioc->active = 1; } @@ -1880,7 +1888,7 @@ mpt_do_ioc_recovery(MPT_ADAPTER *ioc, u32 reason, int sleepFlag) * (FCPortPage0_t stuff) */ for (ii=0; ii < ioc->facts.NumberOfPorts; ii++) { - (void) GetFcPortPage0(ioc, ii); + (void) mptbase_GetFcPortPage0(ioc, ii); } if ((ioc->pfacts[0].ProtocolFlags & MPI_PORTFACTS_PROTOCOL_LAN) && @@ -3042,7 +3050,7 @@ mpt_downloadboot(MPT_ADAPTER *ioc, MpiFwHeader_t *pFwHeader, int sleepFlag) /* Clear the internal flash bad bit - autoincrementing register, * so must do two writes. */ - if (ioc->bus_type == SCSI) { + if (ioc->bus_type == SPI) { /* * 1030 and 1035 H/W errata, workaround to access * the ClearFlashBadSignatureBit @@ -3152,7 +3160,7 @@ KickStart(MPT_ADAPTER *ioc, int force, int sleepFlag) int cnt,cntdn; dinitprintk((KERN_WARNING MYNAM ": KickStarting %s!\n", ioc->name)); - if (ioc->bus_type == SCSI) { + if (ioc->bus_type == SPI) { /* Always issue a Msg Unit Reset first. This will clear some * SCSI bus hang conditions. */ @@ -3580,7 +3588,7 @@ initChainBuffers(MPT_ADAPTER *ioc) dinitprintk((KERN_INFO MYNAM ": %s Now numSGE=%d num_sge=%d num_chain=%d\n", ioc->name, numSGE, num_sge, num_chain)); - if (ioc->bus_type == SCSI) + if (ioc->bus_type == SPI) num_chain *= MPT_SCSI_CAN_QUEUE; else num_chain *= MPT_FC_CAN_QUEUE; @@ -4199,7 +4207,7 @@ GetLanConfigPages(MPT_ADAPTER *ioc) /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ /* - * GetFcPortPage0 - Fetch FCPort config Page0. + * mptbase_GetFcPortPage0 - Fetch FCPort config Page0. * @ioc: Pointer to MPT_ADAPTER structure * @portnum: IOC Port number * @@ -4209,8 +4217,8 @@ GetLanConfigPages(MPT_ADAPTER *ioc) * -EAGAIN if no msg frames currently available * -EFAULT for non-successful reply or no reply (timeout) */ -static int -GetFcPortPage0(MPT_ADAPTER *ioc, int portnum) +int +mptbase_GetFcPortPage0(MPT_ADAPTER *ioc, int portnum) { ConfigPageHeader_t hdr; CONFIGPARMS cfg; @@ -4220,6 +4228,8 @@ GetFcPortPage0(MPT_ADAPTER *ioc, int portnum) int data_sz; int copy_sz; int rc; + int count = 400; + /* Get FCPort Page 0 header */ hdr.PageVersion = 0; @@ -4243,6 +4253,8 @@ GetFcPortPage0(MPT_ADAPTER *ioc, int portnum) rc = -ENOMEM; ppage0_alloc = (FCPortPage0_t *) pci_alloc_consistent(ioc->pcidev, data_sz, &page0_dma); if (ppage0_alloc) { + + try_again: memset((u8 *)ppage0_alloc, 0, data_sz); cfg.physAddr = page0_dma; cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT; @@ -4274,6 +4286,19 @@ GetFcPortPage0(MPT_ADAPTER *ioc, int portnum) pp0dest->DiscoveredPortsCount = le32_to_cpu(pp0dest->DiscoveredPortsCount); pp0dest->MaxInitiators = le32_to_cpu(pp0dest->MaxInitiators); + /* + * if still doing discovery, + * hang loose a while until finished + */ + if (pp0dest->PortState == MPI_FCPORTPAGE0_PORTSTATE_UNKNOWN) { + if (count-- > 0) { + msleep_interruptible(100); + goto try_again; + } + printk(MYIOC_s_INFO_FMT "Firmware discovery not" + " complete.\n", + ioc->name); + } } pci_free_consistent(ioc->pcidev, data_sz, (u8 *) ppage0_alloc, page0_dma); @@ -6358,6 +6383,7 @@ EXPORT_SYMBOL(mpt_alloc_fw_memory); EXPORT_SYMBOL(mpt_free_fw_memory); EXPORT_SYMBOL(mptbase_sas_persist_operation); EXPORT_SYMBOL(mpt_alt_ioc_wait); +EXPORT_SYMBOL(mptbase_GetFcPortPage0); /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ |