diff options
Diffstat (limited to 'drivers/message/fusion/mptbase.c')
-rw-r--r-- | drivers/message/fusion/mptbase.c | 225 |
1 files changed, 53 insertions, 172 deletions
diff --git a/drivers/message/fusion/mptbase.c b/drivers/message/fusion/mptbase.c index a30084076ac..12dd8d493ee 100644 --- a/drivers/message/fusion/mptbase.c +++ b/drivers/message/fusion/mptbase.c @@ -63,9 +63,6 @@ #ifdef CONFIG_MTRR #include <asm/mtrr.h> #endif -#ifdef __sparc__ -#include <asm/irq.h> /* needed for __irq_itoa() proto */ -#endif #include "mptbase.h" @@ -1188,7 +1185,6 @@ mpt_attach(struct pci_dev *pdev, const struct pci_device_id *id) ioc->pcidev = pdev; ioc->diagPending = 0; spin_lock_init(&ioc->diagLock); - spin_lock_init(&ioc->fc_rescan_work_lock); spin_lock_init(&ioc->initializing_hba_lock); /* Initialize the event logging. @@ -1386,39 +1382,6 @@ mpt_attach(struct pci_dev *pdev, const struct pci_device_id *id) /* Set lookup ptr. */ list_add_tail(&ioc->list, &ioc_list); - ioc->pci_irq = -1; - if (pdev->irq) { - if (mpt_msi_enable && !pci_enable_msi(pdev)) - printk(MYIOC_s_INFO_FMT "PCI-MSI enabled\n", ioc->name); - - r = request_irq(pdev->irq, mpt_interrupt, SA_SHIRQ, ioc->name, ioc); - - if (r < 0) { -#ifndef __sparc__ - printk(MYIOC_s_ERR_FMT "Unable to allocate interrupt %d!\n", - ioc->name, pdev->irq); -#else - printk(MYIOC_s_ERR_FMT "Unable to allocate interrupt %s!\n", - ioc->name, __irq_itoa(pdev->irq)); -#endif - list_del(&ioc->list); - iounmap(mem); - kfree(ioc); - return -EBUSY; - } - - ioc->pci_irq = pdev->irq; - - pci_set_master(pdev); /* ?? */ - pci_set_drvdata(pdev, ioc); - -#ifndef __sparc__ - dprintk((KERN_INFO MYNAM ": %s installed at interrupt %d\n", ioc->name, pdev->irq)); -#else - dprintk((KERN_INFO MYNAM ": %s installed at interrupt %s\n", ioc->name, __irq_itoa(pdev->irq))); -#endif - } - /* Check for "bound ports" (929, 929X, 1030, 1035) to reduce redundant resets. */ mpt_detect_bound_ports(ioc, pdev); @@ -1428,11 +1391,7 @@ mpt_attach(struct pci_dev *pdev, const struct pci_device_id *id) printk(KERN_WARNING MYNAM ": WARNING - %s did not initialize properly! (%d)\n", ioc->name, r); - list_del(&ioc->list); - free_irq(ioc->pci_irq, ioc); - if (mpt_msi_enable) - pci_disable_msi(pdev); if (ioc->alt_ioc) ioc->alt_ioc->alt_ioc = NULL; iounmap(mem); @@ -1651,6 +1610,7 @@ mpt_do_ioc_recovery(MPT_ADAPTER *ioc, u32 reason, int sleepFlag) int handlers; int ret = 0; int reset_alt_ioc_active = 0; + int irq_allocated = 0; printk(KERN_INFO MYNAM ": Initiating %s %s\n", ioc->name, reason==MPT_HOSTEVENT_IOC_BRINGUP ? "bringup" : "recovery"); @@ -1734,6 +1694,36 @@ mpt_do_ioc_recovery(MPT_ADAPTER *ioc, u32 reason, int sleepFlag) } } + /* + * Device is reset now. It must have de-asserted the interrupt line + * (if it was asserted) and it should be safe to register for the + * interrupt now. + */ + if ((ret == 0) && (reason == MPT_HOSTEVENT_IOC_BRINGUP)) { + ioc->pci_irq = -1; + if (ioc->pcidev->irq) { + if (mpt_msi_enable && !pci_enable_msi(ioc->pcidev)) + printk(MYIOC_s_INFO_FMT "PCI-MSI enabled\n", + ioc->name); + rc = request_irq(ioc->pcidev->irq, mpt_interrupt, + SA_SHIRQ, ioc->name, ioc); + if (rc < 0) { + printk(MYIOC_s_ERR_FMT "Unable to allocate " + "interrupt %d!\n", ioc->name, + ioc->pcidev->irq); + if (mpt_msi_enable) + pci_disable_msi(ioc->pcidev); + return -EBUSY; + } + irq_allocated = 1; + ioc->pci_irq = ioc->pcidev->irq; + pci_set_master(ioc->pcidev); /* ?? */ + pci_set_drvdata(ioc->pcidev, ioc); + dprintk((KERN_INFO MYNAM ": %s installed at interrupt " + "%d\n", ioc->name, ioc->pcidev->irq)); + } + } + /* Prime reply & request queues! * (mucho alloc's) Must be done prior to * init as upper addresses are needed for init. @@ -1833,7 +1823,7 @@ mpt_do_ioc_recovery(MPT_ADAPTER *ioc, u32 reason, int sleepFlag) ret = mptbase_sas_persist_operation(ioc, MPI_SAS_OP_CLEAR_NOT_PRESENT); if(ret != 0) - return -1; + goto out; } /* Find IM volumes @@ -1841,14 +1831,6 @@ mpt_do_ioc_recovery(MPT_ADAPTER *ioc, u32 reason, int sleepFlag) mpt_findImVolumes(ioc); } else if (ioc->bus_type == FC) { - /* - * Pre-fetch FC port WWN and stuff... - * (FCPortPage0_t stuff) - */ - for (ii=0; ii < ioc->facts.NumberOfPorts; ii++) { - (void) mptbase_GetFcPortPage0(ioc, ii); - } - if ((ioc->pfacts[0].ProtocolFlags & MPI_PORTFACTS_PROTOCOL_LAN) && (ioc->lan_cnfg_page0.Header.PageLength == 0)) { /* @@ -1914,6 +1896,12 @@ mpt_do_ioc_recovery(MPT_ADAPTER *ioc, u32 reason, int sleepFlag) /* FIXME? Examine results here? */ } +out: + if ((ret != 0) && irq_allocated) { + free_irq(ioc->pci_irq, ioc); + if (mpt_msi_enable) + pci_disable_msi(ioc->pcidev); + } return ret; } @@ -2288,7 +2276,7 @@ MakeIocReady(MPT_ADAPTER *ioc, int force, int sleepFlag) } if (sleepFlag == CAN_SLEEP) { - msleep_interruptible(1); + msleep(1); } else { mdelay (1); /* 1 msec delay */ } @@ -2676,7 +2664,7 @@ SendIocInit(MPT_ADAPTER *ioc, int sleepFlag) state = mpt_GetIocState(ioc, 1); while (state != MPI_IOC_STATE_OPERATIONAL && --cntdn) { if (sleepFlag == CAN_SLEEP) { - msleep_interruptible(1); + msleep(1); } else { mdelay(1); } @@ -2928,7 +2916,7 @@ mpt_downloadboot(MPT_ADAPTER *ioc, MpiFwHeader_t *pFwHeader, int sleepFlag) /* wait 1 msec */ if (sleepFlag == CAN_SLEEP) { - msleep_interruptible(1); + msleep(1); } else { mdelay (1); } @@ -2945,7 +2933,7 @@ mpt_downloadboot(MPT_ADAPTER *ioc, MpiFwHeader_t *pFwHeader, int sleepFlag) } /* wait .1 sec */ if (sleepFlag == CAN_SLEEP) { - msleep_interruptible (100); + msleep (100); } else { mdelay (100); } @@ -3035,7 +3023,7 @@ mpt_downloadboot(MPT_ADAPTER *ioc, MpiFwHeader_t *pFwHeader, int sleepFlag) /* wait 1 msec */ if (sleepFlag == CAN_SLEEP) { - msleep_interruptible (1); + msleep (1); } else { mdelay (1); } @@ -3083,7 +3071,7 @@ mpt_downloadboot(MPT_ADAPTER *ioc, MpiFwHeader_t *pFwHeader, int sleepFlag) return 0; } if (sleepFlag == CAN_SLEEP) { - msleep_interruptible (10); + msleep (10); } else { mdelay (10); } @@ -3134,7 +3122,7 @@ KickStart(MPT_ADAPTER *ioc, int force, int sleepFlag) SendIocReset(ioc, MPI_FUNCTION_IOC_MESSAGE_UNIT_RESET, sleepFlag); if (sleepFlag == CAN_SLEEP) { - msleep_interruptible (1000); + msleep (1000); } else { mdelay (1000); } @@ -3156,7 +3144,7 @@ KickStart(MPT_ADAPTER *ioc, int force, int sleepFlag) return hard_reset_done; } if (sleepFlag == CAN_SLEEP) { - msleep_interruptible (10); + msleep (10); } else { mdelay (10); } @@ -3227,7 +3215,7 @@ mpt_diag_reset(MPT_ADAPTER *ioc, int ignore, int sleepFlag) /* wait 100 msec */ if (sleepFlag == CAN_SLEEP) { - msleep_interruptible (100); + msleep (100); } else { mdelay (100); } @@ -3306,7 +3294,7 @@ mpt_diag_reset(MPT_ADAPTER *ioc, int ignore, int sleepFlag) /* wait 1 sec */ if (sleepFlag == CAN_SLEEP) { - msleep_interruptible (1000); + msleep (1000); } else { mdelay (1000); } @@ -3334,7 +3322,7 @@ mpt_diag_reset(MPT_ADAPTER *ioc, int ignore, int sleepFlag) /* wait 1 sec */ if (sleepFlag == CAN_SLEEP) { - msleep_interruptible (1000); + msleep (1000); } else { mdelay (1000); } @@ -3368,7 +3356,7 @@ mpt_diag_reset(MPT_ADAPTER *ioc, int ignore, int sleepFlag) /* wait 100 msec */ if (sleepFlag == CAN_SLEEP) { - msleep_interruptible (100); + msleep (100); } else { mdelay (100); } @@ -3462,7 +3450,7 @@ SendIocReset(MPT_ADAPTER *ioc, u8 reset_type, int sleepFlag) } if (sleepFlag == CAN_SLEEP) { - msleep_interruptible(1); + msleep(1); } else { mdelay (1); /* 1 msec delay */ } @@ -3902,7 +3890,7 @@ WaitForDoorbellAck(MPT_ADAPTER *ioc, int howlong, int sleepFlag) intstat = CHIPREG_READ32(&ioc->chip->IntStatus); if (! (intstat & MPI_HIS_IOP_DOORBELL_STATUS)) break; - msleep_interruptible (1); + msleep (1); count++; } } else { @@ -3951,7 +3939,7 @@ WaitForDoorbellInt(MPT_ADAPTER *ioc, int howlong, int sleepFlag) intstat = CHIPREG_READ32(&ioc->chip->IntStatus); if (intstat & MPI_HIS_DOORBELL_INTERRUPT) break; - msleep_interruptible(1); + msleep(1); count++; } } else { @@ -4174,108 +4162,6 @@ GetLanConfigPages(MPT_ADAPTER *ioc) /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ /* - * mptbase_GetFcPortPage0 - Fetch FCPort config Page0. - * @ioc: Pointer to MPT_ADAPTER structure - * @portnum: IOC Port number - * - * Return: 0 for success - * -ENOMEM if no memory available - * -EPERM if not allowed due to ISR context - * -EAGAIN if no msg frames currently available - * -EFAULT for non-successful reply or no reply (timeout) - */ -int -mptbase_GetFcPortPage0(MPT_ADAPTER *ioc, int portnum) -{ - ConfigPageHeader_t hdr; - CONFIGPARMS cfg; - FCPortPage0_t *ppage0_alloc; - FCPortPage0_t *pp0dest; - dma_addr_t page0_dma; - int data_sz; - int copy_sz; - int rc; - int count = 400; - - - /* Get FCPort Page 0 header */ - hdr.PageVersion = 0; - hdr.PageLength = 0; - hdr.PageNumber = 0; - hdr.PageType = MPI_CONFIG_PAGETYPE_FC_PORT; - cfg.cfghdr.hdr = &hdr; - cfg.physAddr = -1; - cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER; - cfg.dir = 0; - cfg.pageAddr = portnum; - cfg.timeout = 0; - - if ((rc = mpt_config(ioc, &cfg)) != 0) - return rc; - - if (hdr.PageLength == 0) - return 0; - - data_sz = hdr.PageLength * 4; - rc = -ENOMEM; - ppage0_alloc = (FCPortPage0_t *) pci_alloc_consistent(ioc->pcidev, data_sz, &page0_dma); - if (ppage0_alloc) { - - try_again: - memset((u8 *)ppage0_alloc, 0, data_sz); - cfg.physAddr = page0_dma; - cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT; - - if ((rc = mpt_config(ioc, &cfg)) == 0) { - /* save the data */ - pp0dest = &ioc->fc_port_page0[portnum]; - copy_sz = min_t(int, sizeof(FCPortPage0_t), data_sz); - memcpy(pp0dest, ppage0_alloc, copy_sz); - - /* - * Normalize endianness of structure data, - * by byte-swapping all > 1 byte fields! - */ - pp0dest->Flags = le32_to_cpu(pp0dest->Flags); - pp0dest->PortIdentifier = le32_to_cpu(pp0dest->PortIdentifier); - pp0dest->WWNN.Low = le32_to_cpu(pp0dest->WWNN.Low); - pp0dest->WWNN.High = le32_to_cpu(pp0dest->WWNN.High); - pp0dest->WWPN.Low = le32_to_cpu(pp0dest->WWPN.Low); - pp0dest->WWPN.High = le32_to_cpu(pp0dest->WWPN.High); - pp0dest->SupportedServiceClass = le32_to_cpu(pp0dest->SupportedServiceClass); - pp0dest->SupportedSpeeds = le32_to_cpu(pp0dest->SupportedSpeeds); - pp0dest->CurrentSpeed = le32_to_cpu(pp0dest->CurrentSpeed); - pp0dest->MaxFrameSize = le32_to_cpu(pp0dest->MaxFrameSize); - pp0dest->FabricWWNN.Low = le32_to_cpu(pp0dest->FabricWWNN.Low); - pp0dest->FabricWWNN.High = le32_to_cpu(pp0dest->FabricWWNN.High); - pp0dest->FabricWWPN.Low = le32_to_cpu(pp0dest->FabricWWPN.Low); - pp0dest->FabricWWPN.High = le32_to_cpu(pp0dest->FabricWWPN.High); - pp0dest->DiscoveredPortsCount = le32_to_cpu(pp0dest->DiscoveredPortsCount); - pp0dest->MaxInitiators = le32_to_cpu(pp0dest->MaxInitiators); - - /* - * if still doing discovery, - * hang loose a while until finished - */ - if (pp0dest->PortState == MPI_FCPORTPAGE0_PORTSTATE_UNKNOWN) { - if (count-- > 0) { - msleep_interruptible(100); - goto try_again; - } - printk(MYIOC_s_INFO_FMT "Firmware discovery not" - " complete.\n", - ioc->name); - } - } - - pci_free_consistent(ioc->pcidev, data_sz, (u8 *) ppage0_alloc, page0_dma); - } - - return rc; -} - -/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ -/* * mptbase_sas_persist_operation - Perform operation on SAS Persitent Table * @ioc: Pointer to MPT_ADAPTER structure * @sas_address: 64bit SAS Address for operation. @@ -5647,11 +5533,7 @@ mpt_print_ioc_summary(MPT_ADAPTER *ioc, char *buffer, int *size, int len, int sh a[5], a[4], a[3], a[2], a[1], a[0]); } -#ifndef __sparc__ y += sprintf(buffer+len+y, ", IRQ=%d", ioc->pci_irq); -#else - y += sprintf(buffer+len+y, ", IRQ=%s", __irq_itoa(ioc->pci_irq)); -#endif if (!ioc->active) y += sprintf(buffer+len+y, " (disabled)"); @@ -6483,7 +6365,6 @@ EXPORT_SYMBOL(mpt_findImVolumes); EXPORT_SYMBOL(mpt_alloc_fw_memory); EXPORT_SYMBOL(mpt_free_fw_memory); EXPORT_SYMBOL(mptbase_sas_persist_operation); -EXPORT_SYMBOL(mptbase_GetFcPortPage0); /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ |