diff options
Diffstat (limited to 'drivers/message/fusion/mptbase.c')
| -rw-r--r-- | drivers/message/fusion/mptbase.c | 255 |
1 files changed, 137 insertions, 118 deletions
diff --git a/drivers/message/fusion/mptbase.c b/drivers/message/fusion/mptbase.c index 051b7c5b8f0..6e068cf1049 100644 --- a/drivers/message/fusion/mptbase.c +++ b/drivers/message/fusion/mptbase.c @@ -347,7 +347,7 @@ mpt_reply(MPT_ADAPTER *ioc, u32 pa) } /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ -/* +/** * mpt_interrupt - MPT adapter (IOC) specific interrupt handler. * @irq: irq number (not used) * @bus_id: bus identifier cookie == pointer to MPT_ADAPTER structure @@ -387,14 +387,16 @@ mpt_interrupt(int irq, void *bus_id) } /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ -/* - * mpt_base_reply - MPT base driver's callback routine; all base driver - * "internal" request/reply processing is routed here. - * Currently used for EventNotification and EventAck handling. +/** + * mpt_base_reply - MPT base driver's callback routine * @ioc: Pointer to MPT_ADAPTER structure * @mf: Pointer to original MPT request frame * @reply: Pointer to MPT reply frame (NULL if TurboReply) * + * MPT base driver's callback routine; all base driver + * "internal" request/reply processing is routed here. + * Currently used for EventNotification and EventAck handling. + * * Returns 1 indicating original alloc'd request frame ptr * should be freed, or 0 if it shouldn't. */ @@ -530,7 +532,7 @@ mpt_base_reply(MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf, MPT_FRAME_HDR *reply) * @dclass: Protocol driver's class (%MPT_DRIVER_CLASS enum value) * * This routine is called by a protocol-specific driver (SCSI host, - * LAN, SCSI target) to register it's reply callback routine. Each + * LAN, SCSI target) to register its reply callback routine. Each * protocol-specific driver must do this before it will be able to * use any IOC resources, such as obtaining request frames. * @@ -572,7 +574,7 @@ mpt_register(MPT_CALLBACK cbfunc, MPT_DRIVER_CLASS dclass) * mpt_deregister - Deregister a protocol drivers resources. * @cb_idx: previously registered callback handle * - * Each protocol-specific driver should call this routine when it's + * Each protocol-specific driver should call this routine when its * module is unloaded. */ void @@ -617,7 +619,7 @@ mpt_event_register(int cb_idx, MPT_EVHANDLER ev_cbfunc) * * Each protocol-specific driver should call this routine * when it does not (or can no longer) handle events, - * or when it's module is unloaded. + * or when its module is unloaded. */ void mpt_event_deregister(int cb_idx) @@ -656,7 +658,7 @@ mpt_reset_register(int cb_idx, MPT_RESETHANDLER reset_func) * * Each protocol-specific driver should call this routine * when it does not (or can no longer) handle IOC reset handling, - * or when it's module is unloaded. + * or when its module is unloaded. */ void mpt_reset_deregister(int cb_idx) @@ -670,6 +672,8 @@ mpt_reset_deregister(int cb_idx) /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ /** * mpt_device_driver_register - Register device driver hooks + * @dd_cbfunc: driver callbacks struct + * @cb_idx: MPT protocol driver index */ int mpt_device_driver_register(struct mpt_pci_driver * dd_cbfunc, int cb_idx) @@ -696,6 +700,7 @@ mpt_device_driver_register(struct mpt_pci_driver * dd_cbfunc, int cb_idx) /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ /** * mpt_device_driver_deregister - DeRegister device driver hooks + * @cb_idx: MPT protocol driver index */ void mpt_device_driver_deregister(int cb_idx) @@ -887,8 +892,7 @@ mpt_add_sge(char *pAddr, u32 flagslength, dma_addr_t dma_addr) /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ /** - * mpt_send_handshake_request - Send MPT request via doorbell - * handshake method. + * mpt_send_handshake_request - Send MPT request via doorbell handshake method. * @handle: Handle of registered MPT protocol driver * @ioc: Pointer to MPT adapter structure * @reqBytes: Size of the request in bytes @@ -981,10 +985,13 @@ mpt_send_handshake_request(int handle, MPT_ADAPTER *ioc, int reqBytes, u32 *req, /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ /** - * mpt_host_page_access_control - provides mechanism for the host - * driver to control the IOC's Host Page Buffer access. + * mpt_host_page_access_control - control the IOC's Host Page Buffer access * @ioc: Pointer to MPT adapter structure * @access_control_value: define bits below + * @sleepFlag: Specifies whether the process can sleep + * + * Provides mechanism for the host driver to control the IOC's + * Host Page Buffer access. * * Access Control Value - bits[15:12] * 0h Reserved @@ -1022,10 +1029,10 @@ mpt_host_page_access_control(MPT_ADAPTER *ioc, u8 access_control_value, int slee /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ /** * mpt_host_page_alloc - allocate system memory for the fw - * If we already allocated memory in past, then resend the same pointer. - * ioc@: Pointer to pointer to IOC adapter - * ioc_init@: Pointer to ioc init config page + * @ioc: Pointer to pointer to IOC adapter + * @ioc_init: Pointer to ioc init config page * + * If we already allocated memory in past, then resend the same pointer. * Returns 0 for success, non-zero for failure. */ static int @@ -1091,12 +1098,15 @@ return 0; /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ /** - * mpt_verify_adapter - Given a unique IOC identifier, set pointer to - * the associated MPT adapter structure. + * mpt_verify_adapter - Given IOC identifier, set pointer to its adapter structure. * @iocid: IOC unique identifier (integer) * @iocpp: Pointer to pointer to IOC adapter * - * Returns iocid and sets iocpp. + * Given a unique IOC identifier, set pointer to the associated MPT + * adapter structure. + * + * Returns iocid and sets iocpp if iocid is found. + * Returns -1 if iocid is not found. */ int mpt_verify_adapter(int iocid, MPT_ADAPTER **iocpp) @@ -1115,9 +1125,10 @@ mpt_verify_adapter(int iocid, MPT_ADAPTER **iocpp) } /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ -/* +/** * mpt_attach - Install a PCI intelligent MPT adapter. * @pdev: Pointer to pci_dev structure + * @id: PCI device ID information * * This routine performs all the steps necessary to bring the IOC of * a MPT adapter to a OPERATIONAL state. This includes registering @@ -1417,10 +1428,9 @@ mpt_attach(struct pci_dev *pdev, const struct pci_device_id *id) } /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ -/* +/** * mpt_detach - Remove a PCI intelligent MPT adapter. * @pdev: Pointer to pci_dev structure - * */ void @@ -1466,10 +1476,10 @@ mpt_detach(struct pci_dev *pdev) */ #ifdef CONFIG_PM /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ -/* +/** * mpt_suspend - Fusion MPT base driver suspend routine. - * - * + * @pdev: Pointer to pci_dev structure + * @state: new state to enter */ int mpt_suspend(struct pci_dev *pdev, pm_message_t state) @@ -1505,10 +1515,9 @@ mpt_suspend(struct pci_dev *pdev, pm_message_t state) } /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ -/* +/** * mpt_resume - Fusion MPT base driver resume routine. - * - * + * @pdev: Pointer to pci_dev structure */ int mpt_resume(struct pci_dev *pdev) @@ -1566,7 +1575,7 @@ mpt_signal_reset(int index, MPT_ADAPTER *ioc, int reset_phase) } /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ -/* +/** * mpt_do_ioc_recovery - Initialize or recover MPT adapter. * @ioc: Pointer to MPT adapter structure * @reason: Event word / reason @@ -1892,13 +1901,15 @@ mpt_do_ioc_recovery(MPT_ADAPTER *ioc, u32 reason, int sleepFlag) } /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ -/* - * mpt_detect_bound_ports - Search for PCI bus/dev_function - * which matches PCI bus/dev_function (+/-1) for newly discovered 929, - * 929X, 1030 or 1035. +/** + * mpt_detect_bound_ports - Search for matching PCI bus/dev_function * @ioc: Pointer to MPT adapter structure * @pdev: Pointer to (struct pci_dev) structure * + * Search for PCI bus/dev_function which matches + * PCI bus/dev_function (+/-1) for newly discovered 929, + * 929X, 1030 or 1035. + * * If match on PCI dev_function +/-1 is found, bind the two MPT adapters * using alt_ioc pointer fields in their %MPT_ADAPTER structures. */ @@ -1945,9 +1956,9 @@ mpt_detect_bound_ports(MPT_ADAPTER *ioc, struct pci_dev *pdev) } /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ -/* +/** * mpt_adapter_disable - Disable misbehaving MPT adapter. - * @this: Pointer to MPT adapter structure + * @ioc: Pointer to MPT adapter structure */ static void mpt_adapter_disable(MPT_ADAPTER *ioc) @@ -2046,9 +2057,8 @@ mpt_adapter_disable(MPT_ADAPTER *ioc) } /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ -/* - * mpt_adapter_dispose - Free all resources associated with a MPT - * adapter. +/** + * mpt_adapter_dispose - Free all resources associated with an MPT adapter * @ioc: Pointer to MPT adapter structure * * This routine unregisters h/w resources and frees all alloc'd memory @@ -2099,8 +2109,8 @@ mpt_adapter_dispose(MPT_ADAPTER *ioc) } /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ -/* - * MptDisplayIocCapabilities - Disply IOC's capacilities. +/** + * MptDisplayIocCapabilities - Disply IOC's capabilities. * @ioc: Pointer to MPT adapter structure */ static void @@ -2142,7 +2152,7 @@ MptDisplayIocCapabilities(MPT_ADAPTER *ioc) } /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ -/* +/** * MakeIocReady - Get IOC to a READY state, using KickStart if needed. * @ioc: Pointer to MPT_ADAPTER structure * @force: Force hard KickStart of IOC @@ -2279,7 +2289,7 @@ MakeIocReady(MPT_ADAPTER *ioc, int force, int sleepFlag) } /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ -/* +/** * mpt_GetIocState - Get the current state of a MPT adapter. * @ioc: Pointer to MPT_ADAPTER structure * @cooked: Request raw or cooked IOC state @@ -2304,7 +2314,7 @@ mpt_GetIocState(MPT_ADAPTER *ioc, int cooked) } /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ -/* +/** * GetIocFacts - Send IOCFacts request to MPT adapter. * @ioc: Pointer to MPT_ADAPTER structure * @sleepFlag: Specifies whether the process can sleep @@ -2478,7 +2488,7 @@ GetIocFacts(MPT_ADAPTER *ioc, int sleepFlag, int reason) } /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ -/* +/** * GetPortFacts - Send PortFacts request to MPT adapter. * @ioc: Pointer to MPT_ADAPTER structure * @portnum: Port number @@ -2545,7 +2555,7 @@ GetPortFacts(MPT_ADAPTER *ioc, int portnum, int sleepFlag) } /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ -/* +/** * SendIocInit - Send IOCInit request to MPT adapter. * @ioc: Pointer to MPT_ADAPTER structure * @sleepFlag: Specifies whether the process can sleep @@ -2630,7 +2640,7 @@ SendIocInit(MPT_ADAPTER *ioc, int sleepFlag) } /* No need to byte swap the multibyte fields in the reply - * since we don't even look at it's contents. + * since we don't even look at its contents. */ dhsprintk((MYIOC_s_INFO_FMT "Sending PortEnable (req @ %p)\n", @@ -2672,7 +2682,7 @@ SendIocInit(MPT_ADAPTER *ioc, int sleepFlag) } /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ -/* +/** * SendPortEnable - Send PortEnable request to MPT adapter port. * @ioc: Pointer to MPT_ADAPTER structure * @portnum: Port number to enable @@ -2723,9 +2733,13 @@ SendPortEnable(MPT_ADAPTER *ioc, int portnum, int sleepFlag) return rc; } -/* - * ioc: Pointer to MPT_ADAPTER structure - * size - total FW bytes +/** + * mpt_alloc_fw_memory - allocate firmware memory + * @ioc: Pointer to MPT_ADAPTER structure + * @size: total FW bytes + * + * If memory has already been allocated, the same (cached) value + * is returned. */ void mpt_alloc_fw_memory(MPT_ADAPTER *ioc, int size) @@ -2742,9 +2756,12 @@ mpt_alloc_fw_memory(MPT_ADAPTER *ioc, int size) ioc->alloc_total += size; } } -/* - * If alt_img is NULL, delete from ioc structure. - * Else, delete a secondary image in same format. +/** + * mpt_free_fw_memory - free firmware memory + * @ioc: Pointer to MPT_ADAPTER structure + * + * If alt_img is NULL, delete from ioc structure. + * Else, delete a secondary image in same format. */ void mpt_free_fw_memory(MPT_ADAPTER *ioc) @@ -2763,7 +2780,7 @@ mpt_free_fw_memory(MPT_ADAPTER *ioc) /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ -/* +/** * mpt_do_upload - Construct and Send FWUpload request to MPT adapter port. * @ioc: Pointer to MPT_ADAPTER structure * @sleepFlag: Specifies whether the process can sleep @@ -2865,10 +2882,10 @@ mpt_do_upload(MPT_ADAPTER *ioc, int sleepFlag) } /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ -/* +/** * mpt_downloadboot - DownloadBoot code * @ioc: Pointer to MPT_ADAPTER structure - * @flag: Specify which part of IOC memory is to be uploaded. + * @pFwHeader: Pointer to firmware header info * @sleepFlag: Specifies whether the process can sleep * * FwDownloadBoot requires Programmed IO access. @@ -3071,7 +3088,7 @@ mpt_downloadboot(MPT_ADAPTER *ioc, MpiFwHeader_t *pFwHeader, int sleepFlag) } /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ -/* +/** * KickStart - Perform hard reset of MPT adapter. * @ioc: Pointer to MPT_ADAPTER structure * @force: Force hard reset @@ -3145,12 +3162,12 @@ KickStart(MPT_ADAPTER *ioc, int force, int sleepFlag) } /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ -/* +/** * mpt_diag_reset - Perform hard reset of the adapter. * @ioc: Pointer to MPT_ADAPTER structure * @ignore: Set if to honor and clear to ignore * the reset history bit - * @sleepflag: CAN_SLEEP if called in a non-interrupt thread, + * @sleepFlag: CAN_SLEEP if called in a non-interrupt thread, * else set to NO_SLEEP (use mdelay instead) * * This routine places the adapter in diagnostic mode via the @@ -3436,11 +3453,12 @@ mpt_diag_reset(MPT_ADAPTER *ioc, int ignore, int sleepFlag) } /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ -/* +/** * SendIocReset - Send IOCReset request to MPT adapter. * @ioc: Pointer to MPT_ADAPTER structure * @reset_type: reset type, expected values are * %MPI_FUNCTION_IOC_MESSAGE_UNIT_RESET or %MPI_FUNCTION_IO_UNIT_RESET + * @sleepFlag: Specifies whether the process can sleep * * Send IOCReset request to the MPT adapter. * @@ -3494,11 +3512,12 @@ SendIocReset(MPT_ADAPTER *ioc, u8 reset_type, int sleepFlag) } /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ -/* - * initChainBuffers - Allocate memory for and initialize - * chain buffers, chain buffer control arrays and spinlock. - * @hd: Pointer to MPT_SCSI_HOST structure - * @init: If set, initialize the spin lock. +/** + * initChainBuffers - Allocate memory for and initialize chain buffers + * @ioc: Pointer to MPT_ADAPTER structure + * + * Allocates memory for and initializes chain buffers, + * chain buffer control arrays and spinlock. */ static int initChainBuffers(MPT_ADAPTER *ioc) @@ -3594,7 +3613,7 @@ initChainBuffers(MPT_ADAPTER *ioc) } /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ -/* +/** * PrimeIocFifos - Initialize IOC request and reply FIFOs. * @ioc: Pointer to MPT_ADAPTER structure * @@ -3891,15 +3910,15 @@ mpt_handshake_req_reply_wait(MPT_ADAPTER *ioc, int reqBytes, u32 *req, } /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ -/* - * WaitForDoorbellAck - Wait for IOC to clear the IOP_DOORBELL_STATUS bit - * in it's IntStatus register. +/** + * WaitForDoorbellAck - Wait for IOC doorbell handshake acknowledge * @ioc: Pointer to MPT_ADAPTER structure * @howlong: How long to wait (in seconds) * @sleepFlag: Specifies whether the process can sleep * * This routine waits (up to ~2 seconds max) for IOC doorbell - * handshake ACKnowledge. + * handshake ACKnowledge, indicated by the IOP_DOORBELL_STATUS + * bit in its IntStatus register being clear. * * Returns a negative value on failure, else wait loop count. */ @@ -3942,14 +3961,14 @@ WaitForDoorbellAck(MPT_ADAPTER *ioc, int howlong, int sleepFlag) } /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ -/* - * WaitForDoorbellInt - Wait for IOC to set the HIS_DOORBELL_INTERRUPT bit - * in it's IntStatus register. +/** + * WaitForDoorbellInt - Wait for IOC to set its doorbell interrupt bit * @ioc: Pointer to MPT_ADAPTER structure * @howlong: How long to wait (in seconds) * @sleepFlag: Specifies whether the process can sleep * - * This routine waits (up to ~2 seconds max) for IOC doorbell interrupt. + * This routine waits (up to ~2 seconds max) for IOC doorbell interrupt + * (MPI_HIS_DOORBELL_INTERRUPT) to be set in the IntStatus register. * * Returns a negative value on failure, else wait loop count. */ @@ -3991,8 +4010,8 @@ WaitForDoorbellInt(MPT_ADAPTER *ioc, int howlong, int sleepFlag) } /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ -/* - * WaitForDoorbellReply - Wait for and capture a IOC handshake reply. +/** + * WaitForDoorbellReply - Wait for and capture an IOC handshake reply. * @ioc: Pointer to MPT_ADAPTER structure * @howlong: How long to wait (in seconds) * @sleepFlag: Specifies whether the process can sleep @@ -4077,7 +4096,7 @@ WaitForDoorbellReply(MPT_ADAPTER *ioc, int howlong, int sleepFlag) } /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ -/* +/** * GetLanConfigPages - Fetch LANConfig pages. * @ioc: Pointer to MPT_ADAPTER structure * @@ -4188,12 +4207,9 @@ GetLanConfigPages(MPT_ADAPTER *ioc) } /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ -/* - * mptbase_sas_persist_operation - Perform operation on SAS Persitent Table +/** + * mptbase_sas_persist_operation - Perform operation on SAS Persistent Table * @ioc: Pointer to MPT_ADAPTER structure - * @sas_address: 64bit SAS Address for operation. - * @target_id: specified target for operation - * @bus: specified bus for operation * @persist_opcode: see below * * MPI_SAS_OP_CLEAR_NOT_PRESENT - Free all persist TargetID mappings for @@ -4202,7 +4218,7 @@ GetLanConfigPages(MPT_ADAPTER *ioc) * * NOTE: Don't use not this function during interrupt time. * - * Returns: 0 for success, non-zero error + * Returns 0 for success, non-zero error */ /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ @@ -4399,7 +4415,7 @@ mptbase_raid_process_event_data(MPT_ADAPTER *ioc, } /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ -/* +/** * GetIoUnitPage2 - Retrieve BIOS version and boot order information. * @ioc: Pointer to MPT_ADAPTER structure * @@ -4457,7 +4473,8 @@ GetIoUnitPage2(MPT_ADAPTER *ioc) } /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ -/* mpt_GetScsiPortSettings - read SCSI Port Page 0 and 2 +/** + * mpt_GetScsiPortSettings - read SCSI Port Page 0 and 2 * @ioc: Pointer to a Adapter Strucutre * @portnum: IOC port number * @@ -4644,7 +4661,8 @@ mpt_GetScsiPortSettings(MPT_ADAPTER *ioc, int portnum) } /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ -/* mpt_readScsiDevicePageHeaders - save version and length of SDP1 +/** + * mpt_readScsiDevicePageHeaders - save version and length of SDP1 * @ioc: Pointer to a Adapter Strucutre * @portnum: IOC port number * @@ -4996,9 +5014,8 @@ mpt_read_ioc_pg_1(MPT_ADAPTER *ioc) } /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ -/* - * SendEventNotification - Send EventNotification (on or off) request - * to MPT adapter. +/** + * SendEventNotification - Send EventNotification (on or off) request to adapter * @ioc: Pointer to MPT_ADAPTER structure * @EvSwitch: Event switch flags */ @@ -5062,8 +5079,8 @@ SendEventAck(MPT_ADAPTER *ioc, EventNotificationReply_t *evnp) /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ /** * mpt_config - Generic function to issue config message - * @ioc - Pointer to an adapter structure - * @cfg - Pointer to a configuration structure. Struct contains + * @ioc: Pointer to an adapter structure + * @pCfg: Pointer to a configuration structure. Struct contains * action, page address, direction, physical address * and pointer to a configuration page header * Page header is updated. @@ -5188,8 +5205,8 @@ mpt_config(MPT_ADAPTER *ioc, CONFIGPARMS *pCfg) } /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ -/* - * mpt_timer_expired - Call back for timer process. +/** + * mpt_timer_expired - Callback for timer process. * Used only internal config functionality. * @data: Pointer to MPT_SCSI_HOST recast as an unsigned long */ @@ -5214,12 +5231,12 @@ mpt_timer_expired(unsigned long data) } /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ -/* +/** * mpt_ioc_reset - Base cleanup for hard reset * @ioc: Pointer to the adapter structure * @reset_phase: Indicates pre- or post-reset functionality * - * Remark: Free's resources with internally generated commands. + * Remark: Frees resources with internally generated commands. */ static int mpt_ioc_reset(MPT_ADAPTER *ioc, int reset_phase) @@ -5271,7 +5288,7 @@ mpt_ioc_reset(MPT_ADAPTER *ioc, int reset_phase) * procfs (%MPT_PROCFS_MPTBASEDIR/...) support stuff... */ /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ -/* +/** * procmpt_create - Create %MPT_PROCFS_MPTBASEDIR entries. * * Returns 0 for success, non-zero for failure. @@ -5297,7 +5314,7 @@ procmpt_create(void) } /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ -/* +/** * procmpt_destroy - Tear down %MPT_PROCFS_MPTBASEDIR entries. * * Returns 0 for success, non-zero for failure. @@ -5311,16 +5328,16 @@ procmpt_destroy(void) } /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ -/* - * procmpt_summary_read - Handle read request from /proc/mpt/summary - * or from /proc/mpt/iocN/summary. +/** + * procmpt_summary_read - Handle read request of a summary file * @buf: Pointer to area to write information * @start: Pointer to start pointer * @offset: Offset to start writing - * @request: + * @request: Amount of read data requested * @eof: Pointer to EOF integer * @data: Pointer * + * Handles read request from /proc/mpt/summary or /proc/mpt/iocN/summary. * Returns number of characters written to process performing the read. */ static int @@ -5355,12 +5372,12 @@ procmpt_summary_read(char *buf, char **start, off_t offset, int request, int *eo } /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ -/* +/** * procmpt_version_read - Handle read request from /proc/mpt/version. * @buf: Pointer to area to write information * @start: Pointer to start pointer * @offset: Offset to start writing - * @request: + * @request: Amount of read data requested * @eof: Pointer to EOF integer * @data: Pointer * @@ -5411,12 +5428,12 @@ procmpt_version_read(char *buf, char **start, off_t offset, int request, int *eo } /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ -/* +/** * procmpt_iocinfo_read - Handle read request from /proc/mpt/iocN/info. * @buf: Pointer to area to write information * @start: Pointer to start pointer * @offset: Offset to start writing - * @request: + * @request: Amount of read data requested * @eof: Pointer to EOF integer * @data: Pointer * @@ -5577,16 +5594,17 @@ mpt_print_ioc_summary(MPT_ADAPTER *ioc, char *buffer, int *size, int len, int sh */ /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ /** - * mpt_HardResetHandler - Generic reset handler, issue SCSI Task - * Management call based on input arg values. If TaskMgmt fails, - * return associated SCSI request. + * mpt_HardResetHandler - Generic reset handler * @ioc: Pointer to MPT_ADAPTER structure * @sleepFlag: Indicates if sleep or schedule must be called. * + * Issues SCSI Task Management call based on input arg values. + * If TaskMgmt fails, returns associated SCSI request. + * * Remark: _HardResetHandler can be invoked from an interrupt thread (timer) * or a non-interrupt thread. In the former, must not call schedule(). * - * Remark: A return of -1 is a FATAL error case, as it means a + * Note: A return of -1 is a FATAL error case, as it means a * FW reload/initialization failed. * * Returns 0 for SUCCESS or -1 if FAILED. @@ -5935,13 +5953,14 @@ EventDescriptionStr(u8 event, u32 evData0, char *evStr) } /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ -/* - * ProcessEventNotification - Route a received EventNotificationReply to - * all currently regeistered event handlers. +/** + * ProcessEventNotification - Route EventNotificationReply to all event handlers * @ioc: Pointer to MPT_ADAPTER structure * @pEventReply: Pointer to EventNotification reply frame * @evHandlers: Pointer to integer, number of event handlers * + * Routes a received EventNotificationReply to all currently registered + * event handlers. * Returns sum of event handlers return values. */ static int @@ -6056,7 +6075,7 @@ ProcessEventNotification(MPT_ADAPTER *ioc, EventNotificationReply_t *pEventReply } /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ -/* +/** * mpt_fc_log_info - Log information returned from Fibre Channel IOC. * @ioc: Pointer to MPT_ADAPTER structure * @log_info: U32 LogInfo reply word from the IOC @@ -6077,7 +6096,7 @@ mpt_fc_log_info(MPT_ADAPTER *ioc, u32 log_info) } /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ -/* +/** * mpt_spi_log_info - Log information returned from SCSI Parallel IOC. * @ioc: Pointer to MPT_ADAPTER structure * @mr: Pointer to MPT reply frame @@ -6200,7 +6219,7 @@ mpt_spi_log_info(MPT_ADAPTER *ioc, u32 log_info) }; /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ -/* +/** * mpt_sas_log_info - Log information returned from SAS IOC. * @ioc: Pointer to MPT_ADAPTER structure * @log_info: U32 LogInfo reply word from the IOC @@ -6255,7 +6274,7 @@ union loginfo_type { } /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ -/* +/** * mpt_sp_ioc_info - IOC information returned from SCSI Parallel IOC. * @ioc: Pointer to MPT_ADAPTER structure * @ioc_status: U32 IOCStatus word from IOC @@ -6416,7 +6435,7 @@ EXPORT_SYMBOL(mpt_free_fw_memory); EXPORT_SYMBOL(mptbase_sas_persist_operation); /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ -/* +/** * fusion_init - Fusion MPT base driver initialization routine. * * Returns 0 for success, non-zero for failure. @@ -6456,7 +6475,7 @@ fusion_init(void) } /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ -/* +/** * fusion_exit - Perform driver unload cleanup. * * This routine frees all resources associated with each MPT adapter |