diff options
Diffstat (limited to 'drivers/message/fusion/mptsas.c')
-rw-r--r-- | drivers/message/fusion/mptsas.c | 329 |
1 files changed, 254 insertions, 75 deletions
diff --git a/drivers/message/fusion/mptsas.c b/drivers/message/fusion/mptsas.c index 429820e48c6..e0a8bb8ba7d 100644 --- a/drivers/message/fusion/mptsas.c +++ b/drivers/message/fusion/mptsas.c @@ -83,6 +83,7 @@ MODULE_PARM_DESC(mpt_pt_clear, static int mptsasDoneCtx = -1; static int mptsasTaskCtx = -1; static int mptsasInternalCtx = -1; /* Used only for internal commands */ +static int mptsasMgmtCtx = -1; /* @@ -123,6 +124,104 @@ struct mptsas_portinfo { struct mptsas_phyinfo *phy_info; }; + +#ifdef SASDEBUG +static void mptsas_print_phy_data(MPI_SAS_IO_UNIT0_PHY_DATA *phy_data) +{ + printk("---- IO UNIT PAGE 0 ------------\n"); + printk("Handle=0x%X\n", + le16_to_cpu(phy_data->AttachedDeviceHandle)); + printk("Controller Handle=0x%X\n", + le16_to_cpu(phy_data->ControllerDevHandle)); + printk("Port=0x%X\n", phy_data->Port); + printk("Port Flags=0x%X\n", phy_data->PortFlags); + printk("PHY Flags=0x%X\n", phy_data->PhyFlags); + printk("Negotiated Link Rate=0x%X\n", phy_data->NegotiatedLinkRate); + printk("Controller PHY Device Info=0x%X\n", + le32_to_cpu(phy_data->ControllerPhyDeviceInfo)); + printk("DiscoveryStatus=0x%X\n", + le32_to_cpu(phy_data->DiscoveryStatus)); + printk("\n"); +} + +static void mptsas_print_phy_pg0(SasPhyPage0_t *pg0) +{ + __le64 sas_address; + + memcpy(&sas_address, &pg0->SASAddress, sizeof(__le64)); + + printk("---- SAS PHY PAGE 0 ------------\n"); + printk("Attached Device Handle=0x%X\n", + le16_to_cpu(pg0->AttachedDevHandle)); + printk("SAS Address=0x%llX\n", + (unsigned long long)le64_to_cpu(sas_address)); + printk("Attached PHY Identifier=0x%X\n", pg0->AttachedPhyIdentifier); + printk("Attached Device Info=0x%X\n", + le32_to_cpu(pg0->AttachedDeviceInfo)); + printk("Programmed Link Rate=0x%X\n", pg0->ProgrammedLinkRate); + printk("Change Count=0x%X\n", pg0->ChangeCount); + printk("PHY Info=0x%X\n", le32_to_cpu(pg0->PhyInfo)); + printk("\n"); +} + +static void mptsas_print_phy_pg1(SasPhyPage1_t *pg1) +{ + printk("---- SAS PHY PAGE 1 ------------\n"); + printk("Invalid Dword Count=0x%x\n", pg1->InvalidDwordCount); + printk("Running Disparity Error Count=0x%x\n", + pg1->RunningDisparityErrorCount); + printk("Loss Dword Synch Count=0x%x\n", pg1->LossDwordSynchCount); + printk("PHY Reset Problem Count=0x%x\n", pg1->PhyResetProblemCount); + printk("\n"); +} + +static void mptsas_print_device_pg0(SasDevicePage0_t *pg0) +{ + __le64 sas_address; + + memcpy(&sas_address, &pg0->SASAddress, sizeof(__le64)); + + printk("---- SAS DEVICE PAGE 0 ---------\n"); + printk("Handle=0x%X\n" ,le16_to_cpu(pg0->DevHandle)); + printk("Enclosure Handle=0x%X\n", le16_to_cpu(pg0->EnclosureHandle)); + printk("Slot=0x%X\n", le16_to_cpu(pg0->Slot)); + printk("SAS Address=0x%llX\n", le64_to_cpu(sas_address)); + printk("Target ID=0x%X\n", pg0->TargetID); + printk("Bus=0x%X\n", pg0->Bus); + /* The PhyNum field specifies the PHY number of the parent + * device this device is linked to + */ + printk("Parent Phy Num=0x%X\n", pg0->PhyNum); + printk("Access Status=0x%X\n", le16_to_cpu(pg0->AccessStatus)); + printk("Device Info=0x%X\n", le32_to_cpu(pg0->DeviceInfo)); + printk("Flags=0x%X\n", le16_to_cpu(pg0->Flags)); + printk("Physical Port=0x%X\n", pg0->PhysicalPort); + printk("\n"); +} + +static void mptsas_print_expander_pg1(SasExpanderPage1_t *pg1) +{ + printk("---- SAS EXPANDER PAGE 1 ------------\n"); + + printk("Physical Port=0x%X\n", pg1->PhysicalPort); + printk("PHY Identifier=0x%X\n", pg1->PhyIdentifier); + printk("Negotiated Link Rate=0x%X\n", pg1->NegotiatedLinkRate); + printk("Programmed Link Rate=0x%X\n", pg1->ProgrammedLinkRate); + printk("Hardware Link Rate=0x%X\n", pg1->HwLinkRate); + printk("Owner Device Handle=0x%X\n", + le16_to_cpu(pg1->OwnerDevHandle)); + printk("Attached Device Handle=0x%X\n", + le16_to_cpu(pg1->AttachedDevHandle)); +} +#else +#define mptsas_print_phy_data(phy_data) do { } while (0) +#define mptsas_print_phy_pg0(pg0) do { } while (0) +#define mptsas_print_phy_pg1(pg1) do { } while (0) +#define mptsas_print_device_pg0(pg0) do { } while (0) +#define mptsas_print_expander_pg1(pg1) do { } while (0) +#endif + + /* * This is pretty ugly. We will be able to seriously clean it up * once the DV code in mptscsih goes away and we can properly @@ -200,91 +299,159 @@ static struct scsi_host_template mptsas_driver_template = { .use_clustering = ENABLE_CLUSTERING, }; -static struct sas_function_template mptsas_transport_functions = { -}; - -static struct scsi_transport_template *mptsas_transport_template; - -#ifdef SASDEBUG -static void mptsas_print_phy_data(MPI_SAS_IO_UNIT0_PHY_DATA *phy_data) +static inline MPT_ADAPTER *phy_to_ioc(struct sas_phy *phy) { - printk("---- IO UNIT PAGE 0 ------------\n"); - printk("Handle=0x%X\n", - le16_to_cpu(phy_data->AttachedDeviceHandle)); - printk("Controller Handle=0x%X\n", - le16_to_cpu(phy_data->ControllerDevHandle)); - printk("Port=0x%X\n", phy_data->Port); - printk("Port Flags=0x%X\n", phy_data->PortFlags); - printk("PHY Flags=0x%X\n", phy_data->PhyFlags); - printk("Negotiated Link Rate=0x%X\n", phy_data->NegotiatedLinkRate); - printk("Controller PHY Device Info=0x%X\n", - le32_to_cpu(phy_data->ControllerPhyDeviceInfo)); - printk("DiscoveryStatus=0x%X\n", - le32_to_cpu(phy_data->DiscoveryStatus)); - printk("\n"); + struct Scsi_Host *shost = dev_to_shost(phy->dev.parent); + return ((MPT_SCSI_HOST *)shost->hostdata)->ioc; } -static void mptsas_print_phy_pg0(SasPhyPage0_t *pg0) +static int mptsas_get_linkerrors(struct sas_phy *phy) { - __le64 sas_address; + MPT_ADAPTER *ioc = phy_to_ioc(phy); + ConfigExtendedPageHeader_t hdr; + CONFIGPARMS cfg; + SasPhyPage1_t *buffer; + dma_addr_t dma_handle; + int error; - memcpy(&sas_address, &pg0->SASAddress, sizeof(__le64)); + hdr.PageVersion = MPI_SASPHY1_PAGEVERSION; + hdr.ExtPageLength = 0; + hdr.PageNumber = 1 /* page number 1*/; + hdr.Reserved1 = 0; + hdr.Reserved2 = 0; + hdr.PageType = MPI_CONFIG_PAGETYPE_EXTENDED; + hdr.ExtPageType = MPI_CONFIG_EXTPAGETYPE_SAS_PHY; - printk("---- SAS PHY PAGE 0 ------------\n"); - printk("Attached Device Handle=0x%X\n", - le16_to_cpu(pg0->AttachedDevHandle)); - printk("SAS Address=0x%llX\n", - (unsigned long long)le64_to_cpu(sas_address)); - printk("Attached PHY Identifier=0x%X\n", pg0->AttachedPhyIdentifier); - printk("Attached Device Info=0x%X\n", - le32_to_cpu(pg0->AttachedDeviceInfo)); - printk("Programmed Link Rate=0x%X\n", pg0->ProgrammedLinkRate); - printk("Change Count=0x%X\n", pg0->ChangeCount); - printk("PHY Info=0x%X\n", le32_to_cpu(pg0->PhyInfo)); - printk("\n"); -} + cfg.cfghdr.ehdr = &hdr; + cfg.physAddr = -1; + cfg.pageAddr = phy->identify.phy_identifier; + cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER; + cfg.dir = 0; /* read */ + cfg.timeout = 10; -static void mptsas_print_device_pg0(SasDevicePage0_t *pg0) -{ - __le64 sas_address; + error = mpt_config(ioc, &cfg); + if (error) + return error; + if (!hdr.ExtPageLength) + return -ENXIO; - memcpy(&sas_address, &pg0->SASAddress, sizeof(__le64)); + buffer = pci_alloc_consistent(ioc->pcidev, hdr.ExtPageLength * 4, + &dma_handle); + if (!buffer) + return -ENOMEM; - printk("---- SAS DEVICE PAGE 0 ---------\n"); - printk("Handle=0x%X\n" ,le16_to_cpu(pg0->DevHandle)); - printk("Enclosure Handle=0x%X\n", le16_to_cpu(pg0->EnclosureHandle)); - printk("Slot=0x%X\n", le16_to_cpu(pg0->Slot)); - printk("SAS Address=0x%llX\n", le64_to_cpu(sas_address)); - printk("Target ID=0x%X\n", pg0->TargetID); - printk("Bus=0x%X\n", pg0->Bus); - printk("PhyNum=0x%X\n", pg0->PhyNum); - printk("AccessStatus=0x%X\n", le16_to_cpu(pg0->AccessStatus)); - printk("Device Info=0x%X\n", le32_to_cpu(pg0->DeviceInfo)); - printk("Flags=0x%X\n", le16_to_cpu(pg0->Flags)); - printk("Physical Port=0x%X\n", pg0->PhysicalPort); - printk("\n"); + cfg.physAddr = dma_handle; + cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT; + + error = mpt_config(ioc, &cfg); + if (error) + goto out_free_consistent; + + mptsas_print_phy_pg1(buffer); + + phy->invalid_dword_count = le32_to_cpu(buffer->InvalidDwordCount); + phy->running_disparity_error_count = + le32_to_cpu(buffer->RunningDisparityErrorCount); + phy->loss_of_dword_sync_count = + le32_to_cpu(buffer->LossDwordSynchCount); + phy->phy_reset_problem_count = + le32_to_cpu(buffer->PhyResetProblemCount); + + out_free_consistent: + pci_free_consistent(ioc->pcidev, hdr.ExtPageLength * 4, + buffer, dma_handle); + return error; } -static void mptsas_print_expander_pg1(SasExpanderPage1_t *pg1) +static int mptsas_mgmt_done(MPT_ADAPTER *ioc, MPT_FRAME_HDR *req, + MPT_FRAME_HDR *reply) { - printk("---- SAS EXPANDER PAGE 1 ------------\n"); + ioc->sas_mgmt.status |= MPT_SAS_MGMT_STATUS_COMMAND_GOOD; + if (reply != NULL) { + ioc->sas_mgmt.status |= MPT_SAS_MGMT_STATUS_RF_VALID; + memcpy(ioc->sas_mgmt.reply, reply, + min(ioc->reply_sz, 4 * reply->u.reply.MsgLength)); + } + complete(&ioc->sas_mgmt.done); + return 1; +} - printk("Physical Port=0x%X\n", pg1->PhysicalPort); - printk("PHY Identifier=0x%X\n", pg1->Phy); - printk("Negotiated Link Rate=0x%X\n", pg1->NegotiatedLinkRate); - printk("Programmed Link Rate=0x%X\n", pg1->ProgrammedLinkRate); - printk("Hardware Link Rate=0x%X\n", pg1->HwLinkRate); - printk("Owner Device Handle=0x%X\n", - le16_to_cpu(pg1->OwnerDevHandle)); - printk("Attached Device Handle=0x%X\n", - le16_to_cpu(pg1->AttachedDevHandle)); +static int mptsas_phy_reset(struct sas_phy *phy, int hard_reset) +{ + MPT_ADAPTER *ioc = phy_to_ioc(phy); + SasIoUnitControlRequest_t *req; + SasIoUnitControlReply_t *reply; + MPT_FRAME_HDR *mf; + MPIHeader_t *hdr; + unsigned long timeleft; + int error = -ERESTARTSYS; + + /* not implemented for expanders */ + if (phy->identify.target_port_protocols & SAS_PROTOCOL_SMP) + return -ENXIO; + + if (down_interruptible(&ioc->sas_mgmt.mutex)) + goto out; + + mf = mpt_get_msg_frame(mptsasMgmtCtx, ioc); + if (!mf) { + error = -ENOMEM; + goto out_unlock; + } + + hdr = (MPIHeader_t *) mf; + req = (SasIoUnitControlRequest_t *)mf; + memset(req, 0, sizeof(SasIoUnitControlRequest_t)); + req->Function = MPI_FUNCTION_SAS_IO_UNIT_CONTROL; + req->MsgContext = hdr->MsgContext; + req->Operation = hard_reset ? + MPI_SAS_OP_PHY_HARD_RESET : MPI_SAS_OP_PHY_LINK_RESET; + req->PhyNum = phy->identify.phy_identifier; + + mpt_put_msg_frame(mptsasMgmtCtx, ioc, mf); + + timeleft = wait_for_completion_timeout(&ioc->sas_mgmt.done, + 10 * HZ); + if (!timeleft) { + /* On timeout reset the board */ + mpt_free_msg_frame(ioc, mf); + mpt_HardResetHandler(ioc, CAN_SLEEP); + error = -ETIMEDOUT; + goto out_unlock; + } + + /* a reply frame is expected */ + if ((ioc->sas_mgmt.status & + MPT_IOCTL_STATUS_RF_VALID) == 0) { + error = -ENXIO; + goto out_unlock; + } + + /* process the completed Reply Message Frame */ + reply = (SasIoUnitControlReply_t *)ioc->sas_mgmt.reply; + if (reply->IOCStatus != MPI_IOCSTATUS_SUCCESS) { + printk("%s: IOCStatus=0x%X IOCLogInfo=0x%X\n", + __FUNCTION__, + reply->IOCStatus, + reply->IOCLogInfo); + error = -ENXIO; + goto out_unlock; + } + + error = 0; + + out_unlock: + up(&ioc->sas_mgmt.mutex); + out: + return error; } -#else -#define mptsas_print_phy_data(phy_data) do { } while (0) -#define mptsas_print_phy_pg0(pg0) do { } while (0) -#define mptsas_print_device_pg0(pg0) do { } while (0) -#define mptsas_print_expander_pg1(pg1) do { } while (0) -#endif + +static struct sas_function_template mptsas_transport_functions = { + .get_linkerrors = mptsas_get_linkerrors, + .phy_reset = mptsas_phy_reset, +}; + +static struct scsi_transport_template *mptsas_transport_template; static int mptsas_sas_io_unit_pg0(MPT_ADAPTER *ioc, struct mptsas_portinfo *port_info) @@ -604,7 +771,7 @@ mptsas_sas_expander_pg1(MPT_ADAPTER *ioc, struct mptsas_phyinfo *phy_info, mptsas_print_expander_pg1(buffer); /* save config data */ - phy_info->phy_id = buffer->Phy; + phy_info->phy_id = buffer->PhyIdentifier; phy_info->port_id = buffer->PhysicalPort; phy_info->negotiated_link_rate = buffer->NegotiatedLinkRate; phy_info->programmed_link_rate = buffer->ProgrammedLinkRate; @@ -680,7 +847,7 @@ mptsas_parse_device_info(struct sas_identify *identify, } static int mptsas_probe_one_phy(struct device *dev, - struct mptsas_phyinfo *phy_info, int index) + struct mptsas_phyinfo *phy_info, int index, int local) { struct sas_phy *port; int error; @@ -773,6 +940,9 @@ static int mptsas_probe_one_phy(struct device *dev, break; } + if (local) + port->local_attached = 1; + error = sas_phy_add(port); if (error) { sas_phy_free(port); @@ -825,6 +995,8 @@ mptsas_probe_hba_phys(MPT_ADAPTER *ioc, int *index) mptsas_sas_device_pg0(ioc, &port_info->phy_info[i].identify, (MPI_SAS_DEVICE_PGAD_FORM_GET_NEXT_HANDLE << MPI_SAS_DEVICE_PGAD_FORM_SHIFT), handle); + port_info->phy_info[i].identify.phy_id = + port_info->phy_info[i].phy_id; handle = port_info->phy_info[i].identify.handle; if (port_info->phy_info[i].attached.handle) { @@ -836,7 +1008,7 @@ mptsas_probe_hba_phys(MPT_ADAPTER *ioc, int *index) } mptsas_probe_one_phy(&ioc->sh->shost_gendev, - &port_info->phy_info[i], *index); + &port_info->phy_info[i], *index, 1); (*index)++; } @@ -881,6 +1053,8 @@ mptsas_probe_expander_phys(MPT_ADAPTER *ioc, u32 *handle, int *index) (MPI_SAS_DEVICE_PGAD_FORM_HANDLE << MPI_SAS_DEVICE_PGAD_FORM_SHIFT), port_info->phy_info[i].identify.handle); + port_info->phy_info[i].identify.phy_id = + port_info->phy_info[i].phy_id; } if (port_info->phy_info[i].attached.handle) { @@ -905,7 +1079,8 @@ mptsas_probe_expander_phys(MPT_ADAPTER *ioc, u32 *handle, int *index) } } - mptsas_probe_one_phy(parent, &port_info->phy_info[i], *index); + mptsas_probe_one_phy(parent, &port_info->phy_info[i], + *index, 0); (*index)++; } @@ -1017,6 +1192,8 @@ mptsas_probe(struct pci_dev *pdev, const struct pci_device_id *id) sh->unique_id = ioc->id; INIT_LIST_HEAD(&ioc->sas_topology); + init_MUTEX(&ioc->sas_mgmt.mutex); + init_completion(&ioc->sas_mgmt.done); /* Verify that we won't exceed the maximum * number of chain buffers @@ -1203,6 +1380,7 @@ mptsas_init(void) mptsasTaskCtx = mpt_register(mptscsih_taskmgmt_complete, MPTSAS_DRIVER); mptsasInternalCtx = mpt_register(mptscsih_scandv_complete, MPTSAS_DRIVER); + mptsasMgmtCtx = mpt_register(mptsas_mgmt_done, MPTSAS_DRIVER); if (mpt_event_register(mptsasDoneCtx, mptscsih_event_process) == 0) { devtprintk((KERN_INFO MYNAM @@ -1226,6 +1404,7 @@ mptsas_exit(void) mpt_reset_deregister(mptsasDoneCtx); mpt_event_deregister(mptsasDoneCtx); + mpt_deregister(mptsasMgmtCtx); mpt_deregister(mptsasInternalCtx); mpt_deregister(mptsasTaskCtx); mpt_deregister(mptsasDoneCtx); |