diff options
Diffstat (limited to 'drivers/message/fusion')
25 files changed, 3294 insertions, 1420 deletions
diff --git a/drivers/message/fusion/Kconfig b/drivers/message/fusion/Kconfig index 452418b24d7..33f209a39cb 100644 --- a/drivers/message/fusion/Kconfig +++ b/drivers/message/fusion/Kconfig @@ -2,34 +2,54 @@ menu "Fusion MPT device support" config FUSION - tristate "Fusion MPT (base + ScsiHost) drivers" + bool + default n + +config FUSION_SPI + tristate "Fusion MPT ScsiHost drivers for SPI" + depends on PCI && SCSI + select FUSION + ---help--- + SCSI HOST support for a parallel SCSI host adapters. + + List of supported controllers: + + LSI53C1020 + LSI53C1020A + LSI53C1030 + LSI53C1035 + +config FUSION_FC + tristate "Fusion MPT ScsiHost drivers for FC" depends on PCI && SCSI + select FUSION ---help--- - LSI Logic Fusion(TM) Message Passing Technology (MPT) device support - provides high performance SCSI host initiator, and LAN [1] interface - services to a host system. The Fusion architecture is capable of - duplexing these protocols on high-speed Fibre Channel - (up to 2 GHz x 2 ports = 4 GHz) and parallel SCSI (up to Ultra-320) - physical medium. + SCSI HOST support for a Fiber Channel host adapters. - [1] LAN is not supported on parallel SCSI medium. + List of supported controllers: + + LSIFC909 + LSIFC919 + LSIFC919X + LSIFC929 + LSIFC929X + LSIFC929XL config FUSION_MAX_SGE - int "Maximum number of scatter gather entries" + int "Maximum number of scatter gather entries (16 - 128)" depends on FUSION - default "40" + default "128" + range 16 128 help This option allows you to specify the maximum number of scatter- - gather entries per I/O. The driver defaults to 40, a reasonable number - for most systems. However, the user may increase this up to 128. - Increasing this parameter will require significantly more memory - on a per controller instance. Increasing the parameter is not - necessary (or recommended) unless the user will be running - large I/O's via the raw interface. + gather entries per I/O. The driver default is 128, which matches + SCSI_MAX_PHYS_SEGMENTS. However, it may decreased down to 16. + Decreasing this parameter will reduce memory requirements + on a per controller instance. config FUSION_CTL tristate "Fusion MPT misc device (ioctl) driver" - depends on FUSION + depends on FUSION_SPI || FUSION_FC ---help--- The Fusion MPT misc device driver provides specialized control of MPT adapters via system ioctl calls. Use of ioctl calls to @@ -48,7 +68,7 @@ config FUSION_CTL config FUSION_LAN tristate "Fusion MPT LAN driver" - depends on FUSION && NET_FC + depends on FUSION_FC && NET_FC ---help--- This module supports LAN IP traffic over Fibre Channel port(s) on Fusion MPT compatible hardware (LSIFC9xx chips). diff --git a/drivers/message/fusion/Makefile b/drivers/message/fusion/Makefile index f6fdcaaefc8..1d2f9db813c 100644 --- a/drivers/message/fusion/Makefile +++ b/drivers/message/fusion/Makefile @@ -1,52 +1,38 @@ -# -# Makefile for the LSI Logic Fusion MPT (Message Passing Technology) drivers. -# -# Note! If you want to turn on various debug defines for an extended period of -# time but don't want them lingering around in the Makefile when you pass it on -# to someone else, use the MPT_CFLAGS env variable (thanks Steve). -nromer - -#=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-{ LSI_LOGIC - -# Architecture-specific... -# # intel -#EXTRA_CFLAGS += -g -# # sparc64 -#EXTRA_CFLAGS += -gstabs+ - -EXTRA_CFLAGS += ${MPT_CFLAGS} - # Fusion MPT drivers; recognized debug defines... # MPT general: -#EXTRA_CFLAGS += -DMPT_DEBUG_SCSI #EXTRA_CFLAGS += -DMPT_DEBUG #EXTRA_CFLAGS += -DMPT_DEBUG_MSG_FRAME #EXTRA_CFLAGS += -DMPT_DEBUG_SG +#EXTRA_CFLAGS += -DMPT_DEBUG_EVENTS +#EXTRA_CFLAGS += -DMPT_DEBUG_INIT +#EXTRA_CFLAGS += -DMPT_DEBUG_EXIT +#EXTRA_CFLAGS += -DMPT_DEBUG_FAIL + # # driver/module specifics... # # For mptbase: #CFLAGS_mptbase.o += -DMPT_DEBUG_HANDSHAKE +#CFLAGS_mptbase.o += -DMPT_DEBUG_CONFIG +#CFLAGS_mptbase.o += -DMPT_DEBUG_DL #CFLAGS_mptbase.o += -DMPT_DEBUG_IRQ +#CFLAGS_mptbase.o += -DMPT_DEBUG_RESET # # For mptscsih: -#CFLAGS_mptscsih.o += -DMPT_DEBUG_SCANDV -#CFLAGS_mptscsih.o += -DMPT_DEBUG_RESET -#CFLAGS_mptscsih.o += -DMPT_DEBUG_NEH +#CFLAGS_mptscsih.o += -DMPT_DEBUG_DV +#CFLAGS_mptscsih.o += -DMPT_DEBUG_NEGO +#CFLAGS_mptscsih.o += -DMPT_DEBUG_TM +#CFLAGS_mptscsih.o += -DMPT_DEBUG_SCSI +#CFLAGS_mptscsih.o += -DMPT_DEBUG_REPLY # # For mptctl: #CFLAGS_mptctl.o += -DMPT_DEBUG_IOCTL # -# For mptlan: -#CFLAGS_mptlan.o += -DMPT_LAN_IO_DEBUG -# -# For isense: - -# EXP... -##mptscsih-objs := scsihost.o scsiherr.o #=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-} LSI_LOGIC -obj-$(CONFIG_FUSION) += mptbase.o mptscsih.o +obj-$(CONFIG_FUSION_SPI) += mptbase.o mptscsih.o mptspi.o +obj-$(CONFIG_FUSION_FC) += mptbase.o mptscsih.o mptfc.o obj-$(CONFIG_FUSION_CTL) += mptctl.o obj-$(CONFIG_FUSION_LAN) += mptlan.o diff --git a/drivers/message/fusion/lsi/mpi.h b/drivers/message/fusion/lsi/mpi.h index 9dbb061265f..9f98334e507 100644 --- a/drivers/message/fusion/lsi/mpi.h +++ b/drivers/message/fusion/lsi/mpi.h @@ -1,12 +1,12 @@ /* - * Copyright (c) 2000-2003 LSI Logic Corporation. + * Copyright (c) 2000-2005 LSI Logic Corporation. * * * Name: mpi.h * Title: MPI Message independent structures and definitions * Creation Date: July 27, 2000 * - * mpi.h Version: 01.05.xx + * mpi.h Version: 01.05.07 * * Version History * --------------- @@ -52,6 +52,25 @@ * obsoleted define MPI_IOCSTATUS_TARGET_INVALID_IOCINDEX. * 04-01-03 01.02.09 New IOCStatus code: MPI_IOCSTATUS_FC_EXCHANGE_CANCELED * 06-26-03 01.02.10 Bumped MPI_HEADER_VERSION_UNIT value. + * 01-16-04 01.02.11 Added define for MPI_IOCLOGINFO_TYPE_SHIFT. + * 04-29-04 01.02.12 Added function codes for MPI_FUNCTION_DIAG_BUFFER_POST + * and MPI_FUNCTION_DIAG_RELEASE. + * Added MPI_IOCSTATUS_DIAGNOSTIC_RELEASED define. + * Bumped MPI_HEADER_VERSION_UNIT value. + * 05-11-04 01.03.01 Bumped MPI_VERSION_MINOR for MPI v1.3. + * Added codes for Inband. + * 08-19-04 01.05.01 Added defines for Host Buffer Access Control doorbell. + * Added define for offset of High Priority Request Queue. + * Added new function codes and new IOCStatus codes. + * Added a IOCLogInfo type of SAS. + * 12-07-04 01.05.02 Bumped MPI_HEADER_VERSION_UNIT. + * 12-09-04 01.05.03 Bumped MPI_HEADER_VERSION_UNIT. + * 01-15-05 01.05.04 Bumped MPI_HEADER_VERSION_UNIT. + * 02-09-05 01.05.05 Bumped MPI_HEADER_VERSION_UNIT. + * 02-22-05 01.05.06 Bumped MPI_HEADER_VERSION_UNIT. + * 03-11-05 01.05.07 Removed function codes for SCSI IO 32 and + * TargetAssistExtended requests. + * Removed EEDP IOCStatus codes. * -------------------------------------------------------------------------- */ @@ -82,7 +101,7 @@ /* Note: The major versions of 0xe0 through 0xff are reserved */ /* versioning for this MPI header set */ -#define MPI_HEADER_VERSION_UNIT (0x00) +#define MPI_HEADER_VERSION_UNIT (0x09) #define MPI_HEADER_VERSION_DEV (0x00) #define MPI_HEADER_VERSION_UNIT_MASK (0xFF00) #define MPI_HEADER_VERSION_UNIT_SHIFT (8) @@ -122,7 +141,11 @@ * *****************************************************************************/ -/* S y s t e m D o o r b e l l */ +/* + * Defines for working with the System Doorbell register. + * Values for doorbell function codes are included in the section that defines + * all the function codes (further on in this file). + */ #define MPI_DOORBELL_OFFSET (0x00000000) #define MPI_DOORBELL_ACTIVE (0x08000000) /* DoorbellUsed */ #define MPI_DOORBELL_USED (MPI_DOORBELL_ACTIVE) @@ -134,6 +157,13 @@ #define MPI_DOORBELL_ADD_DWORDS_MASK (0x00FF0000) #define MPI_DOORBELL_ADD_DWORDS_SHIFT (16) #define MPI_DOORBELL_DATA_MASK (0x0000FFFF) +#define MPI_DOORBELL_FUNCTION_SPECIFIC_MASK (0x0000FFFF) + +/* values for Host Buffer Access Control doorbell function */ +#define MPI_DB_HPBAC_VALUE_MASK (0x0000F000) +#define MPI_DB_HPBAC_ENABLE_ACCESS (0x01) +#define MPI_DB_HPBAC_DISABLE_ACCESS (0x02) +#define MPI_DB_HPBAC_FREE_BUFFER (0x03) #define MPI_WRITE_SEQUENCE_OFFSET (0x00000004) @@ -257,16 +287,18 @@ #define MPI_FUNCTION_SMP_PASSTHROUGH (0x1A) #define MPI_FUNCTION_SAS_IO_UNIT_CONTROL (0x1B) +#define MPI_FUNCTION_SATA_PASSTHROUGH (0x1C) -#define MPI_DIAG_BUFFER_POST (0x1D) -#define MPI_DIAG_RELEASE (0x1E) - -#define MPI_FUNCTION_SCSI_IO_32 (0x1F) +#define MPI_FUNCTION_DIAG_BUFFER_POST (0x1D) +#define MPI_FUNCTION_DIAG_RELEASE (0x1E) #define MPI_FUNCTION_LAN_SEND (0x20) #define MPI_FUNCTION_LAN_RECEIVE (0x21) #define MPI_FUNCTION_LAN_RESET (0x22) +#define MPI_FUNCTION_TARGET_CMD_BUF_BASE_POST (0x24) +#define MPI_FUNCTION_TARGET_CMD_BUF_LIST_POST (0x25) + #define MPI_FUNCTION_INBAND_BUFFER_POST (0x28) #define MPI_FUNCTION_INBAND_SEND (0x29) #define MPI_FUNCTION_INBAND_RSP (0x2A) @@ -276,6 +308,7 @@ #define MPI_FUNCTION_IO_UNIT_RESET (0x41) #define MPI_FUNCTION_HANDSHAKE (0x42) #define MPI_FUNCTION_REPLY_FRAME_REMOVAL (0x43) +#define MPI_FUNCTION_HOST_PAGEBUF_ACCESS_CONTROL (0x44) /* standard version format */ @@ -328,8 +361,8 @@ typedef struct _SGE_SIMPLE_UNION U32 Address32; U64 Address64; }u; -} SGESimpleUnion_t, MPI_POINTER pSGESimpleUnion_t, - SGE_SIMPLE_UNION, MPI_POINTER PTR_SGE_SIMPLE_UNION; +} SGE_SIMPLE_UNION, MPI_POINTER PTR_SGE_SIMPLE_UNION, + SGESimpleUnion_t, MPI_POINTER pSGESimpleUnion_t; /****************************************************************************/ /* Chain element structures */ @@ -648,27 +681,21 @@ typedef struct _MSG_DEFAULT_REPLY #define MPI_IOCSTATUS_SCSI_EXT_TERMINATED (0x004C) /****************************************************************************/ -/* For use by SCSI Initiator and SCSI Target end-to-end data protection */ -/****************************************************************************/ - -#define MPI_IOCSTATUS_EEDP_CRC_ERROR (0x004D) -#define MPI_IOCSTATUS_EEDP_LBA_TAG_ERROR (0x004E) -#define MPI_IOCSTATUS_EEDP_APP_TAG_ERROR (0x004F) - - -/****************************************************************************/ -/* SCSI (SPI & FCP) target values */ +/* SCSI Target values */ /****************************************************************************/ #define MPI_IOCSTATUS_TARGET_PRIORITY_IO (0x0060) #define MPI_IOCSTATUS_TARGET_INVALID_PORT (0x0061) -#define MPI_IOCSTATUS_TARGET_INVALID_IOCINDEX (0x0062) /* obsolete */ +#define MPI_IOCSTATUS_TARGET_INVALID_IOCINDEX (0x0062) /* obsolete name */ #define MPI_IOCSTATUS_TARGET_INVALID_IO_INDEX (0x0062) #define MPI_IOCSTATUS_TARGET_ABORTED (0x0063) #define MPI_IOCSTATUS_TARGET_NO_CONN_RETRYABLE (0x0064) #define MPI_IOCSTATUS_TARGET_NO_CONNECTION (0x0065) #define MPI_IOCSTATUS_TARGET_XFER_COUNT_MISMATCH (0x006A) #define MPI_IOCSTATUS_TARGET_STS_DATA_NOT_SENT (0x006B) +#define MPI_IOCSTATUS_TARGET_DATA_OFFSET_ERROR (0x006D) +#define MPI_IOCSTATUS_TARGET_TOO_MUCH_WRITE_DATA (0x006E) +#define MPI_IOCSTATUS_TARGET_IU_TOO_SHORT (0x006F) /****************************************************************************/ /* Additional FCP target values (obsolete) */ @@ -707,6 +734,7 @@ typedef struct _MSG_DEFAULT_REPLY /****************************************************************************/ #define MPI_IOCSTATUS_SAS_SMP_REQUEST_FAILED (0x0090) +#define MPI_IOCSTATUS_SAS_SMP_DATA_OVERRUN (0x0091) /****************************************************************************/ /* Inband values */ diff --git a/drivers/message/fusion/lsi/mpi_cnfg.h b/drivers/message/fusion/lsi/mpi_cnfg.h index a5680d864bf..15b12b06799 100644 --- a/drivers/message/fusion/lsi/mpi_cnfg.h +++ b/drivers/message/fusion/lsi/mpi_cnfg.h @@ -1,12 +1,12 @@ /* - * Copyright (c) 2000-2003 LSI Logic Corporation. + * Copyright (c) 2000-2005 LSI Logic Corporation. * * * Name: mpi_cnfg.h * Title: MPI Config message, structures, and Pages * Creation Date: July 27, 2000 * - * mpi_cnfg.h Version: 01.05.xx + * mpi_cnfg.h Version: 01.05.08 * * Version History * --------------- @@ -145,6 +145,93 @@ * In CONFIG_PAGE_FC_DEVICE_0, replaced Reserved1 field * with ADISCHardALPA. * Added MPI_FC_DEVICE_PAGE0_PROT_FCP_RETRY define. + * 01-16-04 01.02.13 Added InitiatorDeviceTimeout and InitiatorIoPendTimeout + * fields and related defines to CONFIG_PAGE_FC_PORT_1. + * Added define for + * MPI_FCPORTPAGE1_FLAGS_SOFT_ALPA_FALLBACK. + * Added new fields to the substructures of + * CONFIG_PAGE_FC_PORT_10. + * 04-29-04 01.02.14 Added define for IDP bit for CONFIG_PAGE_SCSI_PORT_0, + * CONFIG_PAGE_SCSI_DEVICE_0, and + * CONFIG_PAGE_SCSI_DEVICE_1. Also bumped Page Version for + * these pages. + * 05-11-04 01.03.01 Added structure for CONFIG_PAGE_INBAND_0. + * 08-19-04 01.05.01 Modified MSG_CONFIG request to support extended config + * pages. + * Added a new structure for extended config page header. + * Added new extended config pages types and structures for + * SAS IO Unit, SAS Expander, SAS Device, and SAS PHY. + * Replaced a reserved byte in CONFIG_PAGE_MANUFACTURING_4 + * to add a Flags field. + * Two new Manufacturing config pages (5 and 6). + * Two new bits defined for IO Unit Page 1 Flags field. + * Modified CONFIG_PAGE_IO_UNIT_2 to add three new fields + * to specify the BIOS boot device. + * Four new Flags bits defined for IO Unit Page 2. + * Added IO Unit Page 4. + * Added EEDP Flags settings to IOC Page 1. + * Added new BIOS Page 1 config page. + * 10-05-04 01.05.02 Added define for + * MPI_IOCPAGE1_INITIATOR_CONTEXT_REPLY_DISABLE. + * Added new Flags field to CONFIG_PAGE_MANUFACTURING_5 and + * associated defines. + * Added more defines for SAS IO Unit Page 0 + * DiscoveryStatus field. + * Added define for MPI_SAS_IOUNIT0_DS_SUBTRACTIVE_LINK + * and MPI_SAS_IOUNIT0_DS_TABLE_LINK. + * Added defines for Physical Mapping Modes to SAS IO Unit + * Page 2. + * Added define for + * MPI_SAS_DEVICE0_FLAGS_PORT_SELECTOR_ATTACH. + * 10-27-04 01.05.03 Added defines for new SAS PHY page addressing mode. + * Added defines for MaxTargetSpinUp to BIOS Page 1. + * Added 5 new ControlFlags defines for SAS IO Unit + * Page 1. + * Added MaxNumPhysicalMappedIDs field to SAS IO Unit + * Page 2. + * Added AccessStatus field to SAS Device Page 0 and added + * new Flags bits for supported SATA features. + * 12-07-04 01.05.04 Added config page structures for BIOS Page 2, RAID + * Volume Page 1, and RAID Physical Disk Page 1. + * Replaced IO Unit Page 1 BootTargetID,BootBus, and + * BootAdapterNum with reserved field. + * Added DataScrubRate and ResyncRate to RAID Volume + * Page 0. + * Added MPI_SAS_IOUNIT2_FLAGS_RESERVE_ID_0_FOR_BOOT + * define. + * 12-09-04 01.05.05 Added Target Mode Large CDB Enable to FC Port Page 1 + * Flags field. + * Added Auto Port Config flag define for SAS IOUNIT + * Page 1 ControlFlags. + * Added Disabled bad Phy define to Expander Page 1 + * Discovery Info field. + * Added SAS/SATA device support to SAS IOUnit Page 1 + * ControlFlags. + * Added Unsupported device to SAS Dev Page 0 Flags field + * Added disable use SATA Hash Address for SAS IOUNIT + * page 1 in ControlFields. + * 01-15-05 01.05.06 Added defaults for data scrub rate and resync rate to + * Manufacturing Page 4. + * Added new defines for BIOS Page 1 IOCSettings field. + * Added ExtDiskIdentifier field to RAID Physical Disk + * Page 0. + * Added new defines for SAS IO Unit Page 1 ControlFlags + * and to SAS Device Page 0 Flags to control SATA devices. + * Added defines and structures for the new Log Page 0, a + * new type of configuration page. + * 02-09-05 01.05.07 Added InactiveStatus field to RAID Volume Page 0. + * Added WWID field to RAID Volume Page 1. + * Added PhysicalPort field to SAS Expander pages 0 and 1. + * 03-11-05 01.05.08 Removed the EEDP flags from IOC Page 1. + * Added Enclosure/Slot boot device format to BIOS Page 2. + * New status value for RAID Volume Page 0 VolumeStatus + * (VolumeState subfield). + * New value for RAID Physical Page 0 InactiveStatus. + * Added Inactive Volume Member flag RAID Physical Disk + * Page 0 PhysDiskStatus field. + * New physical mapping mode in SAS IO Unit Page 2. + * Added CONFIG_PAGE_SAS_ENCLOSURE_0. + * Added Slot and Enclosure fields to SAS Device Page 0. * -------------------------------------------------------------------------- */ @@ -164,7 +251,7 @@ typedef struct _CONFIG_PAGE_HEADER U8 PageLength; /* 01h */ U8 PageNumber; /* 02h */ U8 PageType; /* 03h */ -} fCONFIG_PAGE_HEADER, MPI_POINTER PTR_CONFIG_PAGE_HEADER, +} CONFIG_PAGE_HEADER, MPI_POINTER PTR_CONFIG_PAGE_HEADER, ConfigPageHeader_t, MPI_POINTER pConfigPageHeader_t; typedef union _CONFIG_PAGE_HEADER_UNION @@ -174,7 +261,7 @@ typedef union _CONFIG_PAGE_HEADER_UNION U16 Word16[2]; U32 Word32; } ConfigPageHeaderUnion, MPI_POINTER pConfigPageHeaderUnion, - fCONFIG_PAGE_HEADER_UNION, MPI_POINTER PTR_CONFIG_PAGE_HEADER_UNION; + CONFIG_PAGE_HEADER_UNION, MPI_POINTER PTR_CONFIG_PAGE_HEADER_UNION; typedef struct _CONFIG_EXTENDED_PAGE_HEADER { @@ -185,7 +272,7 @@ typedef struct _CONFIG_EXTENDED_PAGE_HEADER U16 ExtPageLength; /* 04h */ U8 ExtPageType; /* 06h */ U8 Reserved2; /* 07h */ -} fCONFIG_EXTENDED_PAGE_HEADER, MPI_POINTER PTR_CONFIG_EXTENDED_PAGE_HEADER, +} CONFIG_EXTENDED_PAGE_HEADER, MPI_POINTER PTR_CONFIG_EXTENDED_PAGE_HEADER, ConfigExtendedPageHeader_t, MPI_POINTER pConfigExtendedPageHeader_t; @@ -224,6 +311,8 @@ typedef struct _CONFIG_EXTENDED_PAGE_HEADER #define MPI_CONFIG_EXTPAGETYPE_SAS_EXPANDER (0x11) #define MPI_CONFIG_EXTPAGETYPE_SAS_DEVICE (0x12) #define MPI_CONFIG_EXTPAGETYPE_SAS_PHY (0x13) +#define MPI_CONFIG_EXTPAGETYPE_LOG (0x14) +#define MPI_CONFIG_EXTPAGETYPE_ENCLOSURE (0x15) /**************************************************************************** @@ -231,10 +320,19 @@ typedef struct _CONFIG_EXTENDED_PAGE_HEADER ****************************************************************************/ #define MPI_SCSI_PORT_PGAD_PORT_MASK (0x000000FF) +#define MPI_SCSI_DEVICE_FORM_MASK (0xF0000000) +#define MPI_SCSI_DEVICE_FORM_BUS_TID (0x00000000) #define MPI_SCSI_DEVICE_TARGET_ID_MASK (0x000000FF) #define MPI_SCSI_DEVICE_TARGET_ID_SHIFT (0) #define MPI_SCSI_DEVICE_BUS_MASK (0x0000FF00) #define MPI_SCSI_DEVICE_BUS_SHIFT (8) +#define MPI_SCSI_DEVICE_FORM_TARGET_MODE (0x10000000) +#define MPI_SCSI_DEVICE_TM_RESPOND_ID_MASK (0x000000FF) +#define MPI_SCSI_DEVICE_TM_RESPOND_ID_SHIFT (0) +#define MPI_SCSI_DEVICE_TM_BUS_MASK (0x0000FF00) +#define MPI_SCSI_DEVICE_TM_BUS_SHIFT (8) +#define MPI_SCSI_DEVICE_TM_INIT_ID_MASK (0x00FF0000) +#define MPI_SCSI_DEVICE_TM_INIT_ID_SHIFT (16) #define MPI_FC_PORT_PGAD_PORT_MASK (0xF0000000) #define MPI_FC_PORT_PGAD_PORT_SHIFT (28) @@ -260,6 +358,20 @@ typedef struct _CONFIG_EXTENDED_PAGE_HEADER #define MPI_PHYSDISK_PGAD_PHYSDISKNUM_MASK (0x000000FF) #define MPI_PHYSDISK_PGAD_PHYSDISKNUM_SHIFT (0) +#define MPI_SAS_EXPAND_PGAD_FORM_MASK (0xF0000000) +#define MPI_SAS_EXPAND_PGAD_FORM_SHIFT (28) +#define MPI_SAS_EXPAND_PGAD_FORM_GET_NEXT_HANDLE (0x00000000) +#define MPI_SAS_EXPAND_PGAD_FORM_HANDLE_PHY_NUM (0x00000001) +#define MPI_SAS_EXPAND_PGAD_FORM_HANDLE (0x00000002) +#define MPI_SAS_EXPAND_PGAD_GNH_MASK_HANDLE (0x0000FFFF) +#define MPI_SAS_EXPAND_PGAD_GNH_SHIFT_HANDLE (0) +#define MPI_SAS_EXPAND_PGAD_HPN_MASK_PHY (0x00FF0000) +#define MPI_SAS_EXPAND_PGAD_HPN_SHIFT_PHY (16) +#define MPI_SAS_EXPAND_PGAD_HPN_MASK_HANDLE (0x0000FFFF) +#define MPI_SAS_EXPAND_PGAD_HPN_SHIFT_HANDLE (0) +#define MPI_SAS_EXPAND_PGAD_H_MASK_HANDLE (0x0000FFFF) +#define MPI_SAS_EXPAND_PGAD_H_SHIFT_HANDLE (0) + #define MPI_SAS_DEVICE_PGAD_FORM_MASK (0xF0000000) #define MPI_SAS_DEVICE_PGAD_FORM_SHIFT (28) #define MPI_SAS_DEVICE_PGAD_FORM_GET_NEXT_HANDLE (0x00000000) @@ -274,10 +386,24 @@ typedef struct _CONFIG_EXTENDED_PAGE_HEADER #define MPI_SAS_DEVICE_PGAD_H_HANDLE_MASK (0x0000FFFF) #define MPI_SAS_DEVICE_PGAD_H_HANDLE_SHIFT (0) -#define MPI_SAS_PHY_PGAD_PHY_NUMBER_MASK (0x00FF0000) -#define MPI_SAS_PHY_PGAD_PHY_NUMBER_SHIFT (16) -#define MPI_SAS_PHY_PGAD_DEVHANDLE_MASK (0x0000FFFF) -#define MPI_SAS_PHY_PGAD_DEVHANDLE_SHIFT (0) +#define MPI_SAS_PHY_PGAD_FORM_MASK (0xF0000000) +#define MPI_SAS_PHY_PGAD_FORM_SHIFT (28) +#define MPI_SAS_PHY_PGAD_FORM_PHY_NUMBER (0x0) +#define MPI_SAS_PHY_PGAD_FORM_PHY_TBL_INDEX (0x1) +#define MPI_SAS_PHY_PGAD_PHY_NUMBER_MASK (0x000000FF) +#define MPI_SAS_PHY_PGAD_PHY_NUMBER_SHIFT (0) +#define MPI_SAS_PHY_PGAD_PHY_TBL_INDEX_MASK (0x0000FFFF) +#define MPI_SAS_PHY_PGAD_PHY_TBL_INDEX_SHIFT (0) + +#define MPI_SAS_ENCLOS_PGAD_FORM_MASK (0xF0000000) +#define MPI_SAS_ENCLOS_PGAD_FORM_SHIFT (28) +#define MPI_SAS_ENCLOS_PGAD_FORM_GET_NEXT_HANDLE (0x00000000) +#define MPI_SAS_ENCLOS_PGAD_FORM_HANDLE (0x00000001) +#define MPI_SAS_ENCLOS_PGAD_GNH_HANDLE_MASK (0x0000FFFF) +#define MPI_SAS_ENCLOS_PGAD_GNH_HANDLE_SHIFT (0) +#define MPI_SAS_ENCLOS_PGAD_H_HANDLE_MASK (0x0000FFFF) +#define MPI_SAS_ENCLOS_PGAD_H_HANDLE_SHIFT (0) + /**************************************************************************** @@ -294,7 +420,7 @@ typedef struct _MSG_CONFIG U8 MsgFlags; /* 07h */ U32 MsgContext; /* 08h */ U8 Reserved2[8]; /* 0Ch */ - fCONFIG_PAGE_HEADER Header; /* 14h */ + CONFIG_PAGE_HEADER Header; /* 14h */ U32 PageAddress; /* 18h */ SGE_IO_UNION PageBufferSGE; /* 1Ch */ } MSG_CONFIG, MPI_POINTER PTR_MSG_CONFIG, @@ -327,7 +453,7 @@ typedef struct _MSG_CONFIG_REPLY U8 Reserved2[2]; /* 0Ch */ U16 IOCStatus; /* 0Eh */ U32 IOCLogInfo; /* 10h */ - fCONFIG_PAGE_HEADER Header; /* 14h */ + CONFIG_PAGE_HEADER Header; /* 14h */ } MSG_CONFIG_REPLY, MPI_POINTER PTR_MSG_CONFIG_REPLY, ConfigReply_t, MPI_POINTER pConfigReply_t; @@ -349,6 +475,8 @@ typedef struct _MSG_CONFIG_REPLY #define MPI_MANUFACTPAGE_DEVICEID_FC929 (0x0622) #define MPI_MANUFACTPAGE_DEVICEID_FC919X (0x0628) #define MPI_MANUFACTPAGE_DEVICEID_FC929X (0x0626) +#define MPI_MANUFACTPAGE_DEVICEID_FC939X (0x0642) +#define MPI_MANUFACTPAGE_DEVICEID_FC949X (0x0640) /* SCSI */ #define MPI_MANUFACTPAGE_DEVID_53C1030 (0x0030) #define MPI_MANUFACTPAGE_DEVID_53C1030ZC (0x0031) @@ -358,18 +486,25 @@ typedef struct _MSG_CONFIG_REPLY #define MPI_MANUFACTPAGE_DEVID_53C1035ZC (0x0041) /* SAS */ #define MPI_MANUFACTPAGE_DEVID_SAS1064 (0x0050) +#define MPI_MANUFACTPAGE_DEVID_SAS1064A (0x005C) +#define MPI_MANUFACTPAGE_DEVID_SAS1064E (0x0056) +#define MPI_MANUFACTPAGE_DEVID_SAS1066 (0x005E) +#define MPI_MANUFACTPAGE_DEVID_SAS1066E (0x005A) +#define MPI_MANUFACTPAGE_DEVID_SAS1068 (0x0054) +#define MPI_MANUFACTPAGE_DEVID_SAS1068E (0x0058) +#define MPI_MANUFACTPAGE_DEVID_SAS1078 (0x0060) typedef struct _CONFIG_PAGE_MANUFACTURING_0 { - fCONFIG_PAGE_HEADER Header; /* 00h */ + CONFIG_PAGE_HEADER Header; /* 00h */ U8 ChipName[16]; /* 04h */ U8 ChipRevision[8]; /* 14h */ U8 BoardName[16]; /* 1Ch */ U8 BoardAssembly[16]; /* 2Ch */ U8 BoardTracerNumber[16]; /* 3Ch */ -} fCONFIG_PAGE_MANUFACTURING_0, MPI_POINTER PTR_CONFIG_PAGE_MANUFACTURING_0, +} CONFIG_PAGE_MANUFACTURING_0, MPI_POINTER PTR_CONFIG_PAGE_MANUFACTURING_0, ManufacturingPage0_t, MPI_POINTER pManufacturingPage0_t; #define MPI_MANUFACTURING0_PAGEVERSION (0x00) @@ -377,9 +512,9 @@ typedef struct _CONFIG_PAGE_MANUFACTURING_0 typedef struct _CONFIG_PAGE_MANUFACTURING_1 { - fCONFIG_PAGE_HEADER Header; /* 00h */ + CONFIG_PAGE_HEADER Header; /* 00h */ U8 VPD[256]; /* 04h */ -} fCONFIG_PAGE_MANUFACTURING_1, MPI_POINTER PTR_CONFIG_PAGE_MANUFACTURING_1, +} CONFIG_PAGE_MANUFACTURING_1, MPI_POINTER PTR_CONFIG_PAGE_MANUFACTURING_1, ManufacturingPage1_t, MPI_POINTER pManufacturingPage1_t; #define MPI_MANUFACTURING1_PAGEVERSION (0x00) @@ -404,10 +539,10 @@ typedef struct _MPI_CHIP_REVISION_ID typedef struct _CONFIG_PAGE_MANUFACTURING_2 { - fCONFIG_PAGE_HEADER Header; /* 00h */ + CONFIG_PAGE_HEADER Header; /* 00h */ MPI_CHIP_REVISION_ID ChipId; /* 04h */ U32 HwSettings[MPI_MAN_PAGE_2_HW_SETTINGS_WORDS];/* 08h */ -} fCONFIG_PAGE_MANUFACTURING_2, MPI_POINTER PTR_CONFIG_PAGE_MANUFACTURING_2, +} CONFIG_PAGE_MANUFACTURING_2, MPI_POINTER PTR_CONFIG_PAGE_MANUFACTURING_2, ManufacturingPage2_t, MPI_POINTER pManufacturingPage2_t; #define MPI_MANUFACTURING2_PAGEVERSION (0x00) @@ -423,10 +558,10 @@ typedef struct _CONFIG_PAGE_MANUFACTURING_2 typedef struct _CONFIG_PAGE_MANUFACTURING_3 { - fCONFIG_PAGE_HEADER Header; /* 00h */ + CONFIG_PAGE_HEADER Header; /* 00h */ MPI_CHIP_REVISION_ID ChipId; /* 04h */ U32 Info[MPI_MAN_PAGE_3_INFO_WORDS];/* 08h */ -} fCONFIG_PAGE_MANUFACTURING_3, MPI_POINTER PTR_CONFIG_PAGE_MANUFACTURING_3, +} CONFIG_PAGE_MANUFACTURING_3, MPI_POINTER PTR_CONFIG_PAGE_MANUFACTURING_3, ManufacturingPage3_t, MPI_POINTER pManufacturingPage3_t; #define MPI_MANUFACTURING3_PAGEVERSION (0x00) @@ -434,7 +569,7 @@ typedef struct _CONFIG_PAGE_MANUFACTURING_3 typedef struct _CONFIG_PAGE_MANUFACTURING_4 { - fCONFIG_PAGE_HEADER Header; /* 00h */ + CONFIG_PAGE_HEADER Header; /* 00h */ U32 Reserved1; /* 04h */ U8 InfoOffset0; /* 08h */ U8 InfoSize0; /* 09h */ @@ -447,10 +582,23 @@ typedef struct _CONFIG_PAGE_MANUFACTURING_4 U32 ISVolumeSettings; /* 48h */ U32 IMEVolumeSettings; /* 4Ch */ U32 IMVolumeSettings; /* 50h */ -} fCONFIG_PAGE_MANUFACTURING_4, MPI_POINTER PTR_CONFIG_PAGE_MANUFACTURING_4, + U32 Reserved3; /* 54h */ + U32 Reserved4; /* 58h */ + U8 ISDataScrubRate; /* 5Ch */ + U8 ISResyncRate; /* 5Dh */ + U16 Reserved5; /* 5Eh */ + U8 IMEDataScrubRate; /* 60h */ + U8 IMEResyncRate; /* 61h */ + U16 Reserved6; /* 62h */ + U8 IMDataScrubRate; /* 64h */ + U8 IMResyncRate; /* 65h */ + U16 Reserved7; /* 66h */ + U32 Reserved8; /* 68h */ + U32 Reserved9; /* 6Ch */ +} CONFIG_PAGE_MANUFACTURING_4, MPI_POINTER PTR_CONFIG_PAGE_MANUFACTURING_4, ManufacturingPage4_t, MPI_POINTER pManufacturingPage4_t; -#define MPI_MANUFACTURING4_PAGEVERSION (0x01) +#define MPI_MANUFACTURING4_PAGEVERSION (0x02) /* defines for the Flags field */ #define MPI_MANPAGE4_IR_NO_MIX_SAS_SATA (0x01) @@ -458,19 +606,25 @@ typedef struct _CONFIG_PAGE_MANUFACTURING_4 typedef struct _CONFIG_PAGE_MANUFACTURING_5 { - fCONFIG_PAGE_HEADER Header; /* 00h */ + CONFIG_PAGE_HEADER Header; /* 00h */ U64 BaseWWID; /* 04h */ -} fCONFIG_PAGE_MANUFACTURING_5, MPI_POINTER PTR_CONFIG_PAGE_MANUFACTURING_5, + U8 Flags; /* 0Ch */ + U8 Reserved1; /* 0Dh */ + U16 Reserved2; /* 0Eh */ +} CONFIG_PAGE_MANUFACTURING_5, MPI_POINTER PTR_CONFIG_PAGE_MANUFACTURING_5, ManufacturingPage5_t, MPI_POINTER pManufacturingPage5_t; -#define MPI_MANUFACTURING5_PAGEVERSION (0x00) +#define MPI_MANUFACTURING5_PAGEVERSION (0x01) + +/* defines for the Flags field */ +#define MPI_MANPAGE5_TWO_WWID_PER_PHY (0x01) typedef struct _CONFIG_PAGE_MANUFACTURING_6 { - fCONFIG_PAGE_HEADER Header; /* 00h */ + CONFIG_PAGE_HEADER Header; /* 00h */ U32 ProductSpecificInfo;/* 04h */ -} fCONFIG_PAGE_MANUFACTURING_6, MPI_POINTER PTR_CONFIG_PAGE_MANUFACTURING_6, +} CONFIG_PAGE_MANUFACTURING_6, MPI_POINTER PTR_CONFIG_PAGE_MANUFACTURING_6, ManufacturingPage6_t, MPI_POINTER pManufacturingPage6_t; #define MPI_MANUFACTURING6_PAGEVERSION (0x00) @@ -482,9 +636,9 @@ typedef struct _CONFIG_PAGE_MANUFACTURING_6 typedef struct _CONFIG_PAGE_IO_UNIT_0 { - fCONFIG_PAGE_HEADER Header; /* 00h */ + CONFIG_PAGE_HEADER Header; /* 00h */ U64 UniqueValue; /* 04h */ -} fCONFIG_PAGE_IO_UNIT_0, MPI_POINTER PTR_CONFIG_PAGE_IO_UNIT_0, +} CONFIG_PAGE_IO_UNIT_0, MPI_POINTER PTR_CONFIG_PAGE_IO_UNIT_0, IOUnitPage0_t, MPI_POINTER pIOUnitPage0_t; #define MPI_IOUNITPAGE0_PAGEVERSION (0x00) @@ -492,9 +646,9 @@ typedef struct _CONFIG_PAGE_IO_UNIT_0 typedef struct _CONFIG_PAGE_IO_UNIT_1 { - fCONFIG_PAGE_HEADER Header; /* 00h */ + CONFIG_PAGE_HEADER Header; /* 00h */ U32 Flags; /* 04h */ -} fCONFIG_PAGE_IO_UNIT_1, MPI_POINTER PTR_CONFIG_PAGE_IO_UNIT_1, +} CONFIG_PAGE_IO_UNIT_1, MPI_POINTER PTR_CONFIG_PAGE_IO_UNIT_1, IOUnitPage1_t, MPI_POINTER pIOUnitPage1_t; #define MPI_IOUNITPAGE1_PAGEVERSION (0x01) @@ -524,14 +678,15 @@ typedef struct _MPI_ADAPTER_INFO typedef struct _CONFIG_PAGE_IO_UNIT_2 { - fCONFIG_PAGE_HEADER Header; /* 00h */ + CONFIG_PAGE_HEADER Header; /* 00h */ U32 Flags; /* 04h */ U32 BiosVersion; /* 08h */ MPI_ADAPTER_INFO AdapterOrder[4]; /* 0Ch */ -} fCONFIG_PAGE_IO_UNIT_2, MPI_POINTER PTR_CONFIG_PAGE_IO_UNIT_2, + U32 Reserved1; /* 1Ch */ +} CONFIG_PAGE_IO_UNIT_2, MPI_POINTER PTR_CONFIG_PAGE_IO_UNIT_2, IOUnitPage2_t, MPI_POINTER pIOUnitPage2_t; -#define MPI_IOUNITPAGE2_PAGEVERSION (0x00) +#define MPI_IOUNITPAGE2_PAGEVERSION (0x02) #define MPI_IOUNITPAGE2_FLAGS_PAUSE_ON_ERROR (0x00000002) #define MPI_IOUNITPAGE2_FLAGS_VERBOSE_ENABLE (0x00000004) @@ -554,12 +709,12 @@ typedef struct _CONFIG_PAGE_IO_UNIT_2 typedef struct _CONFIG_PAGE_IO_UNIT_3 { - fCONFIG_PAGE_HEADER Header; /* 00h */ + CONFIG_PAGE_HEADER Header; /* 00h */ U8 GPIOCount; /* 04h */ U8 Reserved1; /* 05h */ U16 Reserved2; /* 06h */ U16 GPIOVal[MPI_IO_UNIT_PAGE_3_GPIO_VAL_MAX]; /* 08h */ -} fCONFIG_PAGE_IO_UNIT_3, MPI_POINTER PTR_CONFIG_PAGE_IO_UNIT_3, +} CONFIG_PAGE_IO_UNIT_3, MPI_POINTER PTR_CONFIG_PAGE_IO_UNIT_3, IOUnitPage3_t, MPI_POINTER pIOUnitPage3_t; #define MPI_IOUNITPAGE3_PAGEVERSION (0x01) @@ -570,13 +725,24 @@ typedef struct _CONFIG_PAGE_IO_UNIT_3 #define MPI_IOUNITPAGE3_GPIO_SETTING_ON (0x01) +typedef struct _CONFIG_PAGE_IO_UNIT_4 +{ + CONFIG_PAGE_HEADER Header; /* 00h */ + U32 Reserved1; /* 04h */ + SGE_SIMPLE_UNION FWImageSGE; /* 08h */ +} CONFIG_PAGE_IO_UNIT_4, MPI_POINTER PTR_CONFIG_PAGE_IO_UNIT_4, + IOUnitPage4_t, MPI_POINTER pIOUnitPage4_t; + +#define MPI_IOUNITPAGE4_PAGEVERSION (0x00) + + /**************************************************************************** * IOC Config Pages ****************************************************************************/ typedef struct _CONFIG_PAGE_IOC_0 { - fCONFIG_PAGE_HEADER Header; /* 00h */ + CONFIG_PAGE_HEADER Header; /* 00h */ U32 TotalNVStore; /* 04h */ U32 FreeNVStore; /* 08h */ U16 VendorID; /* 0Ch */ @@ -586,7 +752,7 @@ typedef struct _CONFIG_PAGE_IOC_0 U32 ClassCode; /* 14h */ U16 SubsystemVendorID; /* 18h */ U16 SubsystemID; /* 1Ah */ -} fCONFIG_PAGE_IOC_0, MPI_POINTER PTR_CONFIG_PAGE_IOC_0, +} CONFIG_PAGE_IOC_0, MPI_POINTER PTR_CONFIG_PAGE_IOC_0, IOCPage0_t, MPI_POINTER pIOCPage0_t; #define MPI_IOCPAGE0_PAGEVERSION (0x01) @@ -594,23 +760,19 @@ typedef struct _CONFIG_PAGE_IOC_0 typedef struct _CONFIG_PAGE_IOC_1 { - fCONFIG_PAGE_HEADER Header; /* 00h */ + CONFIG_PAGE_HEADER Header; /* 00h */ U32 Flags; /* 04h */ U32 CoalescingTimeout; /* 08h */ U8 CoalescingDepth; /* 0Ch */ U8 PCISlotNum; /* 0Dh */ U8 Reserved[2]; /* 0Eh */ -} fCONFIG_PAGE_IOC_1, MPI_POINTER PTR_CONFIG_PAGE_IOC_1, +} CONFIG_PAGE_IOC_1, MPI_POINTER PTR_CONFIG_PAGE_IOC_1, IOCPage1_t, MPI_POINTER pIOCPage1_t; -#define MPI_IOCPAGE1_PAGEVERSION (0x01) +#define MPI_IOCPAGE1_PAGEVERSION (0x02) /* defines for the Flags field */ -#define MPI_IOCPAGE1_EEDP_HOST_SUPPORTS_DIF (0x08000000) -#define MPI_IOCPAGE1_EEDP_MODE_MASK (0x07000000) -#define MPI_IOCPAGE1_EEDP_MODE_OFF (0x00000000) -#define MPI_IOCPAGE1_EEDP_MODE_T10 (0x01000000) -#define MPI_IOCPAGE1_EEDP_MODE_LSI_1 (0x02000000) +#define MPI_IOCPAGE1_INITIATOR_CONTEXT_REPLY_DISABLE (0x00000010) #define MPI_IOCPAGE1_REPLY_COALESCING (0x00000001) #define MPI_IOCPAGE1_PCISLOTNUM_UNKNOWN (0xFF) @@ -625,7 +787,7 @@ typedef struct _CONFIG_PAGE_IOC_2_RAID_VOL U8 VolumeType; /* 04h */ U8 Flags; /* 05h */ U16 Reserved3; /* 06h */ -} fCONFIG_PAGE_IOC_2_RAID_VOL, MPI_POINTER PTR_CONFIG_PAGE_IOC_2_RAID_VOL, +} CONFIG_PAGE_IOC_2_RAID_VOL, MPI_POINTER PTR_CONFIG_PAGE_IOC_2_RAID_VOL, ConfigPageIoc2RaidVol_t, MPI_POINTER pConfigPageIoc2RaidVol_t; /* IOC Page 2 Volume RAID Type values, also used in RAID Volume pages */ @@ -648,14 +810,14 @@ typedef struct _CONFIG_PAGE_IOC_2_RAID_VOL typedef struct _CONFIG_PAGE_IOC_2 { - fCONFIG_PAGE_HEADER Header; /* 00h */ + CONFIG_PAGE_HEADER Header; /* 00h */ U32 CapabilitiesFlags; /* 04h */ U8 NumActiveVolumes; /* 08h */ U8 MaxVolumes; /* 09h */ U8 NumActivePhysDisks; /* 0Ah */ U8 MaxPhysDisks; /* 0Bh */ - fCONFIG_PAGE_IOC_2_RAID_VOL RaidVolume[MPI_IOC_PAGE_2_RAID_VOLUME_MAX];/* 0Ch */ -} fCONFIG_PAGE_IOC_2, MPI_POINTER PTR_CONFIG_PAGE_IOC_2, + CONFIG_PAGE_IOC_2_RAID_VOL RaidVolume[MPI_IOC_PAGE_2_RAID_VOLUME_MAX];/* 0Ch */ +} CONFIG_PAGE_IOC_2, MPI_POINTER PTR_CONFIG_PAGE_IOC_2, IOCPage2_t, MPI_POINTER pIOCPage2_t; #define MPI_IOCPAGE2_PAGEVERSION (0x02) @@ -689,12 +851,12 @@ typedef struct _IOC_3_PHYS_DISK typedef struct _CONFIG_PAGE_IOC_3 { - fCONFIG_PAGE_HEADER Header; /* 00h */ + CONFIG_PAGE_HEADER Header; /* 00h */ U8 NumPhysDisks; /* 04h */ U8 Reserved1; /* 05h */ U16 Reserved2; /* 06h */ IOC_3_PHYS_DISK PhysDisk[MPI_IOC_PAGE_3_PHYSDISK_MAX]; /* 08h */ -} fCONFIG_PAGE_IOC_3, MPI_POINTER PTR_CONFIG_PAGE_IOC_3, +} CONFIG_PAGE_IOC_3, MPI_POINTER PTR_CONFIG_PAGE_IOC_3, IOCPage3_t, MPI_POINTER pIOCPage3_t; #define MPI_IOCPAGE3_PAGEVERSION (0x00) @@ -718,12 +880,12 @@ typedef struct _IOC_4_SEP typedef struct _CONFIG_PAGE_IOC_4 { - fCONFIG_PAGE_HEADER Header; /* 00h */ + CONFIG_PAGE_HEADER Header; /* 00h */ U8 ActiveSEP; /* 04h */ U8 MaxSEP; /* 05h */ U16 Reserved1; /* 06h */ IOC_4_SEP SEP[MPI_IOC_PAGE_4_SEP_MAX]; /* 08h */ -} fCONFIG_PAGE_IOC_4, MPI_POINTER PTR_CONFIG_PAGE_IOC_4, +} CONFIG_PAGE_IOC_4, MPI_POINTER PTR_CONFIG_PAGE_IOC_4, IOCPage4_t, MPI_POINTER pIOCPage4_t; #define MPI_IOCPAGE4_PAGEVERSION (0x00) @@ -751,25 +913,25 @@ typedef struct _IOC_5_HOT_SPARE typedef struct _CONFIG_PAGE_IOC_5 { - fCONFIG_PAGE_HEADER Header; /* 00h */ + CONFIG_PAGE_HEADER Header; /* 00h */ U32 Reserved1; /* 04h */ U8 NumHotSpares; /* 08h */ U8 Reserved2; /* 09h */ U16 Reserved3; /* 0Ah */ IOC_5_HOT_SPARE HotSpare[MPI_IOC_PAGE_5_HOT_SPARE_MAX]; /* 0Ch */ -} fCONFIG_PAGE_IOC_5, MPI_POINTER PTR_CONFIG_PAGE_IOC_5, +} CONFIG_PAGE_IOC_5, MPI_POINTER PTR_CONFIG_PAGE_IOC_5, IOCPage5_t, MPI_POINTER pIOCPage5_t; #define MPI_IOCPAGE5_PAGEVERSION (0x00) /**************************************************************************** -* BIOS Port Config Pages +* BIOS Config Pages ****************************************************************************/ typedef struct _CONFIG_PAGE_BIOS_1 { - fCONFIG_PAGE_HEADER Header; /* 00h */ + CONFIG_PAGE_HEADER Header; /* 00h */ U32 BiosOptions; /* 04h */ U32 IOCSettings; /* 08h */ U32 Reserved1; /* 0Ch */ @@ -780,10 +942,10 @@ typedef struct _CONFIG_PAGE_BIOS_1 U16 IOTimeoutSequential; /* 1Ah */ U16 IOTimeoutOther; /* 1Ch */ U16 IOTimeoutBlockDevicesRM; /* 1Eh */ -} fCONFIG_PAGE_BIOS_1, MPI_POINTER PTR_CONFIG_PAGE_BIOS_1, +} CONFIG_PAGE_BIOS_1, MPI_POINTER PTR_CONFIG_PAGE_BIOS_1, BIOSPage1_t, MPI_POINTER pBIOSPage1_t; -#define MPI_BIOSPAGE1_PAGEVERSION (0x00) +#define MPI_BIOSPAGE1_PAGEVERSION (0x01) /* values for the BiosOptions field */ #define MPI_BIOSPAGE1_OPTIONS_SPI_ENABLE (0x00000400) @@ -792,6 +954,13 @@ typedef struct _CONFIG_PAGE_BIOS_1 #define MPI_BIOSPAGE1_OPTIONS_DISABLE_BIOS (0x00000001) /* values for the IOCSettings field */ +#define MPI_BIOSPAGE1_IOCSET_MASK_BOOT_PREFERENCE (0x00030000) +#define MPI_BIOSPAGE1_IOCSET_ENCLOSURE_SLOT_BOOT (0x00000000) +#define MPI_BIOSPAGE1_IOCSET_SAS_ADDRESS_BOOT (0x00010000) + +#define MPI_BIOSPAGE1_IOCSET_MASK_MAX_TARGET_SPIN_UP (0x0000F000) +#define MPI_BIOSPAGE1_IOCSET_SHIFT_MAX_TARGET_SPIN_UP (12) + #define MPI_BIOSPAGE1_IOCSET_MASK_SPINUP_DELAY (0x00000F00) #define MPI_BIOSPAGE1_IOCSET_SHIFT_SPINUP_DELAY (8) @@ -814,6 +983,191 @@ typedef struct _CONFIG_PAGE_BIOS_1 #define MPI_BIOSPAGE1_DEVSET_DISABLE_NON_RM_LUN (0x00000002) #define MPI_BIOSPAGE1_DEVSET_DISABLE_OTHER_LUN (0x00000001) +typedef struct _MPI_BOOT_DEVICE_ADAPTER_ORDER +{ + U32 Reserved1; /* 00h */ + U32 Reserved2; /* 04h */ + U32 Reserved3; /* 08h */ + U32 Reserved4; /* 0Ch */ + U32 Reserved5; /* 10h */ + U32 Reserved6; /* 14h */ + U32 Reserved7; /* 18h */ + U32 Reserved8; /* 1Ch */ + U32 Reserved9; /* 20h */ + U32 Reserved10; /* 24h */ + U32 Reserved11; /* 28h */ + U32 Reserved12; /* 2Ch */ + U32 Reserved13; /* 30h */ + U32 Reserved14; /* 34h */ + U32 Reserved15; /* 38h */ + U32 Reserved16; /* 3Ch */ + U32 Reserved17; /* 40h */ +} MPI_BOOT_DEVICE_ADAPTER_ORDER, MPI_POINTER PTR_MPI_BOOT_DEVICE_ADAPTER_ORDER; + +typedef struct _MPI_BOOT_DEVICE_ADAPTER_NUMBER +{ + U8 TargetID; /* 00h */ + U8 Bus; /* 01h */ + U8 AdapterNumber; /* 02h */ + U8 Reserved1; /* 03h */ + U32 Reserved2; /* 04h */ + U32 Reserved3; /* 08h */ + U32 Reserved4; /* 0Ch */ + U8 LUN[8]; /* 10h */ + U32 Reserved5; /* 18h */ + U32 Reserved6; /* 1Ch */ + U32 Reserved7; /* 20h */ + U32 Reserved8; /* 24h */ + U32 Reserved9; /* 28h */ + U32 Reserved10; /* 2Ch */ + U32 Reserved11; /* 30h */ + U32 Reserved12; /* 34h */ + U32 Reserved13; /* 38h */ + U32 Reserved14; /* 3Ch */ + U32 Reserved15; /* 40h */ +} MPI_BOOT_DEVICE_ADAPTER_NUMBER, MPI_POINTER PTR_MPI_BOOT_DEVICE_ADAPTER_NUMBER; + +typedef struct _MPI_BOOT_DEVICE_PCI_ADDRESS +{ + U8 TargetID; /* 00h */ + U8 Bus; /* 01h */ + U16 PCIAddress; /* 02h */ + U32 Reserved1; /* 04h */ + U32 Reserved2; /* 08h */ + U32 Reserved3; /* 0Ch */ + U8 LUN[8]; /* 10h */ + U32 Reserved4; /* 18h */ + U32 Reserved5; /* 1Ch */ + U32 Reserved6; /* 20h */ + U32 Reserved7; /* 24h */ + U32 Reserved8; /* 28h */ + U32 Reserved9; /* 2Ch */ + U32 Reserved10; /* 30h */ + U32 Reserved11; /* 34h */ + U32 Reserved12; /* 38h */ + U32 Reserved13; /* 3Ch */ + U32 Reserved14; /* 40h */ +} MPI_BOOT_DEVICE_PCI_ADDRESS, MPI_POINTER PTR_MPI_BOOT_DEVICE_PCI_ADDRESS; + +typedef struct _MPI_BOOT_DEVICE_SLOT_NUMBER +{ + U8 TargetID; /* 00h */ + U8 Bus; /* 01h */ + U8 PCISlotNumber; /* 02h */ + U8 Reserved1; /* 03h */ + U32 Reserved2; /* 04h */ + U32 Reserved3; /* 08h */ + U32 Reserved4; /* 0Ch */ + U8 LUN[8]; /* 10h */ + U32 Reserved5; /* 18h */ + U32 Reserved6; /* 1Ch */ + U32 Reserved7; /* 20h */ + U32 Reserved8; /* 24h */ + U32 Reserved9; /* 28h */ + U32 Reserved10; /* 2Ch */ + U32 Reserved11; /* 30h */ + U32 Reserved12; /* 34h */ + U32 Reserved13; /* 38h */ + U32 Reserved14; /* 3Ch */ + U32 Reserved15; /* 40h */ +} MPI_BOOT_DEVICE_PCI_SLOT_NUMBER, MPI_POINTER PTR_MPI_BOOT_DEVICE_PCI_SLOT_NUMBER; + +typedef struct _MPI_BOOT_DEVICE_FC_WWN +{ + U64 WWPN; /* 00h */ + U32 Reserved1; /* 08h */ + U32 Reserved2; /* 0Ch */ + U8 LUN[8]; /* 10h */ + U32 Reserved3; /* 18h */ + U32 Reserved4; /* 1Ch */ + U32 Reserved5; /* 20h */ + U32 Reserved6; /* 24h */ + U32 Reserved7; /* 28h */ + U32 Reserved8; /* 2Ch */ + U32 Reserved9; /* 30h */ + U32 Reserved10; /* 34h */ + U32 Reserved11; /* 38h */ + U32 Reserved12; /* 3Ch */ + U32 Reserved13; /* 40h */ +} MPI_BOOT_DEVICE_FC_WWN, MPI_POINTER PTR_MPI_BOOT_DEVICE_FC_WWN; + +typedef struct _MPI_BOOT_DEVICE_SAS_WWN +{ + U64 SASAddress; /* 00h */ + U32 Reserved1; /* 08h */ + U32 Reserved2; /* 0Ch */ + U8 LUN[8]; /* 10h */ + U32 Reserved3; /* 18h */ + U32 Reserved4; /* 1Ch */ + U32 Reserved5; /* 20h */ + U32 Reserved6; /* 24h */ + U32 Reserved7; /* 28h */ + U32 Reserved8; /* 2Ch */ + U32 Reserved9; /* 30h */ + U32 Reserved10; /* 34h */ + U32 Reserved11; /* 38h */ + U32 Reserved12; /* 3Ch */ + U32 Reserved13; /* 40h */ +} MPI_BOOT_DEVICE_SAS_WWN, MPI_POINTER PTR_MPI_BOOT_DEVICE_SAS_WWN; + +typedef struct _MPI_BOOT_DEVICE_ENCLOSURE_SLOT +{ + U64 EnclosureLogicalID; /* 00h */ + U32 Reserved1; /* 08h */ + U32 Reserved2; /* 0Ch */ + U8 LUN[8]; /* 10h */ + U16 SlotNumber; /* 18h */ + U16 Reserved3; /* 1Ah */ + U32 Reserved4; /* 1Ch */ + U32 Reserved5; /* 20h */ + U32 Reserved6; /* 24h */ + U32 Reserved7; /* 28h */ + U32 Reserved8; /* 2Ch */ + U32 Reserved9; /* 30h */ + U32 Reserved10; /* 34h */ + U32 Reserved11; /* 38h */ + U32 Reserved12; /* 3Ch */ + U32 Reserved13; /* 40h */ +} MPI_BOOT_DEVICE_ENCLOSURE_SLOT, + MPI_POINTER PTR_MPI_BOOT_DEVICE_ENCLOSURE_SLOT; + +typedef union _MPI_BIOSPAGE2_BOOT_DEVICE +{ + MPI_BOOT_DEVICE_ADAPTER_ORDER AdapterOrder; + MPI_BOOT_DEVICE_ADAPTER_NUMBER AdapterNumber; + MPI_BOOT_DEVICE_PCI_ADDRESS PCIAddress; + MPI_BOOT_DEVICE_PCI_SLOT_NUMBER PCISlotNumber; + MPI_BOOT_DEVICE_FC_WWN FcWwn; + MPI_BOOT_DEVICE_SAS_WWN SasWwn; + MPI_BOOT_DEVICE_ENCLOSURE_SLOT EnclosureSlot; +} MPI_BIOSPAGE2_BOOT_DEVICE, MPI_POINTER PTR_MPI_BIOSPAGE2_BOOT_DEVICE; + +typedef struct _CONFIG_PAGE_BIOS_2 +{ + CONFIG_PAGE_HEADER Header; /* 00h */ + U32 Reserved1; /* 04h */ + U32 Reserved2; /* 08h */ + U32 Reserved3; /* 0Ch */ + U32 Reserved4; /* 10h */ + U32 Reserved5; /* 14h */ + U32 Reserved6; /* 18h */ + U8 BootDeviceForm; /* 1Ch */ + U8 Reserved7; /* 1Dh */ + U16 Reserved8; /* 1Eh */ + MPI_BIOSPAGE2_BOOT_DEVICE BootDevice; /* 20h */ +} CONFIG_PAGE_BIOS_2, MPI_POINTER PTR_CONFIG_PAGE_BIOS_2, + BIOSPage2_t, MPI_POINTER pBIOSPage2_t; + +#define MPI_BIOSPAGE2_PAGEVERSION (0x01) + +#define MPI_BIOSPAGE2_FORM_MASK (0x0F) +#define MPI_BIOSPAGE2_FORM_ADAPTER_ORDER (0x00) +#define MPI_BIOSPAGE2_FORM_ADAPTER_NUMBER (0x01) +#define MPI_BIOSPAGE2_FORM_PCI_ADDRESS (0x02) +#define MPI_BIOSPAGE2_FORM_PCI_SLOT_NUMBER (0x03) +#define MPI_BIOSPAGE2_FORM_FC_WWN (0x04) +#define MPI_BIOSPAGE2_FORM_SAS_WWN (0x05) + /**************************************************************************** * SCSI Port Config Pages @@ -821,13 +1175,13 @@ typedef struct _CONFIG_PAGE_BIOS_1 typedef struct _CONFIG_PAGE_SCSI_PORT_0 { - fCONFIG_PAGE_HEADER Header; /* 00h */ + CONFIG_PAGE_HEADER Header; /* 00h */ U32 Capabilities; /* 04h */ U32 PhysicalInterface; /* 08h */ -} fCONFIG_PAGE_SCSI_PORT_0, MPI_POINTER PTR_CONFIG_PAGE_SCSI_PORT_0, +} CONFIG_PAGE_SCSI_PORT_0, MPI_POINTER PTR_CONFIG_PAGE_SCSI_PORT_0, SCSIPortPage0_t, MPI_POINTER pSCSIPortPage0_t; -#define MPI_SCSIPORTPAGE0_PAGEVERSION (0x01) +#define MPI_SCSIPORTPAGE0_PAGEVERSION (0x02) #define MPI_SCSIPORTPAGE0_CAP_IU (0x00000001) #define MPI_SCSIPORTPAGE0_CAP_DT (0x00000002) @@ -854,6 +1208,7 @@ typedef struct _CONFIG_PAGE_SCSI_PORT_0 ( ((Cap) & MPI_SCSIPORTPAGE0_CAP_MASK_MAX_SYNC_OFFSET) \ >> MPI_SCSIPORTPAGE0_CAP_SHIFT_MAX_SYNC_OFFSET \ ) +#define MPI_SCSIPORTPAGE0_CAP_IDP (0x08000000) #define MPI_SCSIPORTPAGE0_CAP_WIDE (0x20000000) #define MPI_SCSIPORTPAGE0_CAP_AIP (0x80000000) @@ -869,13 +1224,13 @@ typedef struct _CONFIG_PAGE_SCSI_PORT_0 typedef struct _CONFIG_PAGE_SCSI_PORT_1 { - fCONFIG_PAGE_HEADER Header; /* 00h */ + CONFIG_PAGE_HEADER Header; /* 00h */ U32 Configuration; /* 04h */ U32 OnBusTimerValue; /* 08h */ U8 TargetConfig; /* 0Ch */ U8 Reserved1; /* 0Dh */ U16 IDConfig; /* 0Eh */ -} fCONFIG_PAGE_SCSI_PORT_1, MPI_POINTER PTR_CONFIG_PAGE_SCSI_PORT_1, +} CONFIG_PAGE_SCSI_PORT_1, MPI_POINTER PTR_CONFIG_PAGE_SCSI_PORT_1, SCSIPortPage1_t, MPI_POINTER pSCSIPortPage1_t; #define MPI_SCSIPORTPAGE1_PAGEVERSION (0x03) @@ -900,11 +1255,11 @@ typedef struct _MPI_DEVICE_INFO typedef struct _CONFIG_PAGE_SCSI_PORT_2 { - fCONFIG_PAGE_HEADER Header; /* 00h */ + CONFIG_PAGE_HEADER Header; /* 00h */ U32 PortFlags; /* 04h */ U32 PortSettings; /* 08h */ MPI_DEVICE_INFO DeviceSettings[16]; /* 0Ch */ -} fCONFIG_PAGE_SCSI_PORT_2, MPI_POINTER PTR_CONFIG_PAGE_SCSI_PORT_2, +} CONFIG_PAGE_SCSI_PORT_2, MPI_POINTER PTR_CONFIG_PAGE_SCSI_PORT_2, SCSIPortPage2_t, MPI_POINTER pSCSIPortPage2_t; #define MPI_SCSIPORTPAGE2_PAGEVERSION (0x02) @@ -953,13 +1308,13 @@ typedef struct _CONFIG_PAGE_SCSI_PORT_2 typedef struct _CONFIG_PAGE_SCSI_DEVICE_0 { - fCONFIG_PAGE_HEADER Header; /* 00h */ + CONFIG_PAGE_HEADER Header; /* 00h */ U32 NegotiatedParameters; /* 04h */ U32 Information; /* 08h */ -} fCONFIG_PAGE_SCSI_DEVICE_0, MPI_POINTER PTR_CONFIG_PAGE_SCSI_DEVICE_0, +} CONFIG_PAGE_SCSI_DEVICE_0, MPI_POINTER PTR_CONFIG_PAGE_SCSI_DEVICE_0, SCSIDevicePage0_t, MPI_POINTER pSCSIDevicePage0_t; -#define MPI_SCSIDEVPAGE0_PAGEVERSION (0x03) +#define MPI_SCSIDEVPAGE0_PAGEVERSION (0x04) #define MPI_SCSIDEVPAGE0_NP_IU (0x00000001) #define MPI_SCSIDEVPAGE0_NP_DT (0x00000002) @@ -973,6 +1328,7 @@ typedef struct _CONFIG_PAGE_SCSI_DEVICE_0 #define MPI_SCSIDEVPAGE0_NP_SHIFT_SYNC_PERIOD (8) #define MPI_SCSIDEVPAGE0_NP_NEG_SYNC_OFFSET_MASK (0x00FF0000) #define MPI_SCSIDEVPAGE0_NP_SHIFT_SYNC_OFFSET (16) +#define MPI_SCSIDEVPAGE0_NP_IDP (0x08000000) #define MPI_SCSIDEVPAGE0_NP_WIDE (0x20000000) #define MPI_SCSIDEVPAGE0_NP_AIP (0x80000000) @@ -984,14 +1340,14 @@ typedef struct _CONFIG_PAGE_SCSI_DEVICE_0 typedef struct _CONFIG_PAGE_SCSI_DEVICE_1 { - fCONFIG_PAGE_HEADER Header; /* 00h */ + CONFIG_PAGE_HEADER Header; /* 00h */ U32 RequestedParameters; /* 04h */ U32 Reserved; /* 08h */ U32 Configuration; /* 0Ch */ -} fCONFIG_PAGE_SCSI_DEVICE_1, MPI_POINTER PTR_CONFIG_PAGE_SCSI_DEVICE_1, +} CONFIG_PAGE_SCSI_DEVICE_1, MPI_POINTER PTR_CONFIG_PAGE_SCSI_DEVICE_1, SCSIDevicePage1_t, MPI_POINTER pSCSIDevicePage1_t; -#define MPI_SCSIDEVPAGE1_PAGEVERSION (0x04) +#define MPI_SCSIDEVPAGE1_PAGEVERSION (0x05) #define MPI_SCSIDEVPAGE1_RP_IU (0x00000001) #define MPI_SCSIDEVPAGE1_RP_DT (0x00000002) @@ -1005,6 +1361,7 @@ typedef struct _CONFIG_PAGE_SCSI_DEVICE_1 #define MPI_SCSIDEVPAGE1_RP_SHIFT_MIN_SYNC_PERIOD (8) #define MPI_SCSIDEVPAGE1_RP_MAX_SYNC_OFFSET_MASK (0x00FF0000) #define MPI_SCSIDEVPAGE1_RP_SHIFT_MAX_SYNC_OFFSET (16) +#define MPI_SCSIDEVPAGE1_RP_IDP (0x08000000) #define MPI_SCSIDEVPAGE1_RP_WIDE (0x20000000) #define MPI_SCSIDEVPAGE1_RP_AIP (0x80000000) @@ -1016,11 +1373,11 @@ typedef struct _CONFIG_PAGE_SCSI_DEVICE_1 typedef struct _CONFIG_PAGE_SCSI_DEVICE_2 { - fCONFIG_PAGE_HEADER Header; /* 00h */ + CONFIG_PAGE_HEADER Header; /* 00h */ U32 DomainValidation; /* 04h */ U32 ParityPipeSelect; /* 08h */ U32 DataPipeSelect; /* 0Ch */ -} fCONFIG_PAGE_SCSI_DEVICE_2, MPI_POINTER PTR_CONFIG_PAGE_SCSI_DEVICE_2, +} CONFIG_PAGE_SCSI_DEVICE_2, MPI_POINTER PTR_CONFIG_PAGE_SCSI_DEVICE_2, SCSIDevicePage2_t, MPI_POINTER pSCSIDevicePage2_t; #define MPI_SCSIDEVPAGE2_PAGEVERSION (0x01) @@ -1057,12 +1414,12 @@ typedef struct _CONFIG_PAGE_SCSI_DEVICE_2 typedef struct _CONFIG_PAGE_SCSI_DEVICE_3 { - fCONFIG_PAGE_HEADER Header; /* 00h */ + CONFIG_PAGE_HEADER Header; /* 00h */ U16 MsgRejectCount; /* 04h */ U16 PhaseErrorCount; /* 06h */ U16 ParityErrorCount; /* 08h */ U16 Reserved; /* 0Ah */ -} fCONFIG_PAGE_SCSI_DEVICE_3, MPI_POINTER PTR_CONFIG_PAGE_SCSI_DEVICE_3, +} CONFIG_PAGE_SCSI_DEVICE_3, MPI_POINTER PTR_CONFIG_PAGE_SCSI_DEVICE_3, SCSIDevicePage3_t, MPI_POINTER pSCSIDevicePage3_t; #define MPI_SCSIDEVPAGE3_PAGEVERSION (0x00) @@ -1077,7 +1434,7 @@ typedef struct _CONFIG_PAGE_SCSI_DEVICE_3 typedef struct _CONFIG_PAGE_FC_PORT_0 { - fCONFIG_PAGE_HEADER Header; /* 00h */ + CONFIG_PAGE_HEADER Header; /* 00h */ U32 Flags; /* 04h */ U8 MPIPortNumber; /* 08h */ U8 LinkType; /* 09h */ @@ -1098,7 +1455,7 @@ typedef struct _CONFIG_PAGE_FC_PORT_0 U8 MaxHardAliasesSupported; /* 49h */ U8 NumCurrentAliases; /* 4Ah */ U8 Reserved1; /* 4Bh */ -} fCONFIG_PAGE_FC_PORT_0, MPI_POINTER PTR_CONFIG_PAGE_FC_PORT_0, +} CONFIG_PAGE_FC_PORT_0, MPI_POINTER PTR_CONFIG_PAGE_FC_PORT_0, FCPortPage0_t, MPI_POINTER pFCPortPage0_t; #define MPI_FCPORTPAGE0_PAGEVERSION (0x02) @@ -1164,10 +1521,9 @@ typedef struct _CONFIG_PAGE_FC_PORT_0 #define MPI_FCPORTPAGE0_CURRENT_SPEED_NOT_NEGOTIATED (0x00008000) /* (SNIA)HBA_PORTSPEED_NOT_NEGOTIATED (1<<15) Speed not established */ - typedef struct _CONFIG_PAGE_FC_PORT_1 { - fCONFIG_PAGE_HEADER Header; /* 00h */ + CONFIG_PAGE_HEADER Header; /* 00h */ U32 Flags; /* 04h */ U64 NoSEEPROMWWNN; /* 08h */ U64 NoSEEPROMWWPN; /* 10h */ @@ -1179,7 +1535,7 @@ typedef struct _CONFIG_PAGE_FC_PORT_1 U8 RR_TOV; /* 1Dh */ U8 InitiatorDeviceTimeout; /* 1Eh */ U8 InitiatorIoPendTimeout; /* 1Fh */ -} fCONFIG_PAGE_FC_PORT_1, MPI_POINTER PTR_CONFIG_PAGE_FC_PORT_1, +} CONFIG_PAGE_FC_PORT_1, MPI_POINTER PTR_CONFIG_PAGE_FC_PORT_1, FCPortPage1_t, MPI_POINTER pFCPortPage1_t; #define MPI_FCPORTPAGE1_PAGEVERSION (0x06) @@ -1191,6 +1547,7 @@ typedef struct _CONFIG_PAGE_FC_PORT_1 #define MPI_FCPORTPAGE1_FLAGS_TARGET_MODE_OXID (0x00800000) #define MPI_FCPORTPAGE1_FLAGS_PORT_OFFLINE (0x00400000) #define MPI_FCPORTPAGE1_FLAGS_SOFT_ALPA_FALLBACK (0x00200000) +#define MPI_FCPORTPAGE1_FLAGS_TARGET_LARGE_CDB_ENABLE (0x00000080) #define MPI_FCPORTPAGE1_FLAGS_MASK_RR_TOV_UNITS (0x00000070) #define MPI_FCPORTPAGE1_FLAGS_SUPPRESS_PROT_REG (0x00000008) #define MPI_FCPORTPAGE1_FLAGS_PLOGI_ON_LOGO (0x00000004) @@ -1227,14 +1584,15 @@ typedef struct _CONFIG_PAGE_FC_PORT_1 #define MPI_FCPORTPAGE1_ALT_CONN_UNKNOWN (0x00) #define MPI_FCPORTPAGE1_INITIATOR_DEV_TIMEOUT_MASK (0x7F) +#define MPI_FCPORTPAGE1_INITIATOR_DEV_UNIT_16 (0x80) typedef struct _CONFIG_PAGE_FC_PORT_2 { - fCONFIG_PAGE_HEADER Header; /* 00h */ + CONFIG_PAGE_HEADER Header; /* 00h */ U8 NumberActive; /* 04h */ U8 ALPA[127]; /* 05h */ -} fCONFIG_PAGE_FC_PORT_2, MPI_POINTER PTR_CONFIG_PAGE_FC_PORT_2, +} CONFIG_PAGE_FC_PORT_2, MPI_POINTER PTR_CONFIG_PAGE_FC_PORT_2, FCPortPage2_t, MPI_POINTER pFCPortPage2_t; #define MPI_FCPORTPAGE2_PAGEVERSION (0x01) @@ -1280,9 +1638,9 @@ typedef struct _FC_PORT_PERSISTENT typedef struct _CONFIG_PAGE_FC_PORT_3 { - fCONFIG_PAGE_HEADER Header; /* 00h */ + CONFIG_PAGE_HEADER Header; /* 00h */ FC_PORT_PERSISTENT Entry[MPI_FC_PORT_PAGE_3_ENTRY_MAX]; /* 04h */ -} fCONFIG_PAGE_FC_PORT_3, MPI_POINTER PTR_CONFIG_PAGE_FC_PORT_3, +} CONFIG_PAGE_FC_PORT_3, MPI_POINTER PTR_CONFIG_PAGE_FC_PORT_3, FCPortPage3_t, MPI_POINTER pFCPortPage3_t; #define MPI_FCPORTPAGE3_PAGEVERSION (0x01) @@ -1290,10 +1648,10 @@ typedef struct _CONFIG_PAGE_FC_PORT_3 typedef struct _CONFIG_PAGE_FC_PORT_4 { - fCONFIG_PAGE_HEADER Header; /* 00h */ + CONFIG_PAGE_HEADER Header; /* 00h */ U32 PortFlags; /* 04h */ U32 PortSettings; /* 08h */ -} fCONFIG_PAGE_FC_PORT_4, MPI_POINTER PTR_CONFIG_PAGE_FC_PORT_4, +} CONFIG_PAGE_FC_PORT_4, MPI_POINTER PTR_CONFIG_PAGE_FC_PORT_4, FCPortPage4_t, MPI_POINTER pFCPortPage4_t; #define MPI_FCPORTPAGE4_PAGEVERSION (0x00) @@ -1316,15 +1674,15 @@ typedef struct _CONFIG_PAGE_FC_PORT_5_ALIAS_INFO U16 Reserved; /* 02h */ U64 AliasWWNN; /* 04h */ U64 AliasWWPN; /* 0Ch */ -} fCONFIG_PAGE_FC_PORT_5_ALIAS_INFO, +} CONFIG_PAGE_FC_PORT_5_ALIAS_INFO, MPI_POINTER PTR_CONFIG_PAGE_FC_PORT_5_ALIAS_INFO, FcPortPage5AliasInfo_t, MPI_POINTER pFcPortPage5AliasInfo_t; typedef struct _CONFIG_PAGE_FC_PORT_5 { - fCONFIG_PAGE_HEADER Header; /* 00h */ - fCONFIG_PAGE_FC_PORT_5_ALIAS_INFO AliasInfo; /* 04h */ -} fCONFIG_PAGE_FC_PORT_5, MPI_POINTER PTR_CONFIG_PAGE_FC_PORT_5, + CONFIG_PAGE_HEADER Header; /* 00h */ + CONFIG_PAGE_FC_PORT_5_ALIAS_INFO AliasInfo; /* 04h */ +} CONFIG_PAGE_FC_PORT_5, MPI_POINTER PTR_CONFIG_PAGE_FC_PORT_5, FCPortPage5_t, MPI_POINTER pFCPortPage5_t; #define MPI_FCPORTPAGE5_PAGEVERSION (0x02) @@ -1337,7 +1695,7 @@ typedef struct _CONFIG_PAGE_FC_PORT_5 typedef struct _CONFIG_PAGE_FC_PORT_6 { - fCONFIG_PAGE_HEADER Header; /* 00h */ + CONFIG_PAGE_HEADER Header; /* 00h */ U32 Reserved; /* 04h */ U64 TimeSinceReset; /* 08h */ U64 TxFrames; /* 10h */ @@ -1355,7 +1713,7 @@ typedef struct _CONFIG_PAGE_FC_PORT_6 U64 InvalidTxWordCount; /* 70h */ U64 InvalidCrcCount; /* 78h */ U64 FcpInitiatorIoCount; /* 80h */ -} fCONFIG_PAGE_FC_PORT_6, MPI_POINTER PTR_CONFIG_PAGE_FC_PORT_6, +} CONFIG_PAGE_FC_PORT_6, MPI_POINTER PTR_CONFIG_PAGE_FC_PORT_6, FCPortPage6_t, MPI_POINTER pFCPortPage6_t; #define MPI_FCPORTPAGE6_PAGEVERSION (0x00) @@ -1363,10 +1721,10 @@ typedef struct _CONFIG_PAGE_FC_PORT_6 typedef struct _CONFIG_PAGE_FC_PORT_7 { - fCONFIG_PAGE_HEADER Header; /* 00h */ + CONFIG_PAGE_HEADER Header; /* 00h */ U32 Reserved; /* 04h */ U8 PortSymbolicName[256]; /* 08h */ -} fCONFIG_PAGE_FC_PORT_7, MPI_POINTER PTR_CONFIG_PAGE_FC_PORT_7, +} CONFIG_PAGE_FC_PORT_7, MPI_POINTER PTR_CONFIG_PAGE_FC_PORT_7, FCPortPage7_t, MPI_POINTER pFCPortPage7_t; #define MPI_FCPORTPAGE7_PAGEVERSION (0x00) @@ -1374,9 +1732,9 @@ typedef struct _CONFIG_PAGE_FC_PORT_7 typedef struct _CONFIG_PAGE_FC_PORT_8 { - fCONFIG_PAGE_HEADER Header; /* 00h */ + CONFIG_PAGE_HEADER Header; /* 00h */ U32 BitVector[8]; /* 04h */ -} fCONFIG_PAGE_FC_PORT_8, MPI_POINTER PTR_CONFIG_PAGE_FC_PORT_8, +} CONFIG_PAGE_FC_PORT_8, MPI_POINTER PTR_CONFIG_PAGE_FC_PORT_8, FCPortPage8_t, MPI_POINTER pFCPortPage8_t; #define MPI_FCPORTPAGE8_PAGEVERSION (0x00) @@ -1384,7 +1742,7 @@ typedef struct _CONFIG_PAGE_FC_PORT_8 typedef struct _CONFIG_PAGE_FC_PORT_9 { - fCONFIG_PAGE_HEADER Header; /* 00h */ + CONFIG_PAGE_HEADER Header; /* 00h */ U32 Reserved; /* 04h */ U64 GlobalWWPN; /* 08h */ U64 GlobalWWNN; /* 10h */ @@ -1396,7 +1754,7 @@ typedef struct _CONFIG_PAGE_FC_PORT_9 U8 IPAddress[16]; /* 28h */ U16 Reserved1; /* 38h */ U16 TopologyDiscoveryFlags; /* 3Ah */ -} fCONFIG_PAGE_FC_PORT_9, MPI_POINTER PTR_CONFIG_PAGE_FC_PORT_9, +} CONFIG_PAGE_FC_PORT_9, MPI_POINTER PTR_CONFIG_PAGE_FC_PORT_9, FCPortPage9_t, MPI_POINTER pFCPortPage9_t; #define MPI_FCPORTPAGE9_PAGEVERSION (0x00) @@ -1422,10 +1780,10 @@ typedef struct _CONFIG_PAGE_FC_PORT_10_BASE_SFP_DATA U8 VendorOUI[3]; /* 35h */ U8 VendorPN[16]; /* 38h */ U8 VendorRev[4]; /* 48h */ - U16 Reserved4; /* 4Ch */ - U8 Reserved5; /* 4Eh */ + U16 Wavelength; /* 4Ch */ + U8 Reserved4; /* 4Eh */ U8 CC_BASE; /* 4Fh */ -} fCONFIG_PAGE_FC_PORT_10_BASE_SFP_DATA, +} CONFIG_PAGE_FC_PORT_10_BASE_SFP_DATA, MPI_POINTER PTR_CONFIG_PAGE_FC_PORT_10_BASE_SFP_DATA, FCPortPage10BaseSfpData_t, MPI_POINTER pFCPortPage10BaseSfpData_t; @@ -1481,9 +1839,11 @@ typedef struct _CONFIG_PAGE_FC_PORT_10_EXTENDED_SFP_DATA U8 BitRateMin; /* 53h */ U8 VendorSN[16]; /* 54h */ U8 DateCode[8]; /* 64h */ - U8 Reserved5[3]; /* 6Ch */ + U8 DiagMonitoringType; /* 6Ch */ + U8 EnhancedOptions; /* 6Dh */ + U8 SFF8472Compliance; /* 6Eh */ U8 CC_EXT; /* 6Fh */ -} fCONFIG_PAGE_FC_PORT_10_EXTENDED_SFP_DATA, +} CONFIG_PAGE_FC_PORT_10_EXTENDED_SFP_DATA, MPI_POINTER PTR_CONFIG_PAGE_FC_PORT_10_EXTENDED_SFP_DATA, FCPortPage10ExtendedSfpData_t, MPI_POINTER pFCPortPage10ExtendedSfpData_t; @@ -1496,19 +1856,19 @@ typedef struct _CONFIG_PAGE_FC_PORT_10_EXTENDED_SFP_DATA typedef struct _CONFIG_PAGE_FC_PORT_10 { - fCONFIG_PAGE_HEADER Header; /* 00h */ + CONFIG_PAGE_HEADER Header; /* 00h */ U8 Flags; /* 04h */ U8 Reserved1; /* 05h */ U16 Reserved2; /* 06h */ U32 HwConfig1; /* 08h */ U32 HwConfig2; /* 0Ch */ - fCONFIG_PAGE_FC_PORT_10_BASE_SFP_DATA Base; /* 10h */ - fCONFIG_PAGE_FC_PORT_10_EXTENDED_SFP_DATA Extended; /* 50h */ + CONFIG_PAGE_FC_PORT_10_BASE_SFP_DATA Base; /* 10h */ + CONFIG_PAGE_FC_PORT_10_EXTENDED_SFP_DATA Extended; /* 50h */ U8 VendorSpecific[32]; /* 70h */ -} fCONFIG_PAGE_FC_PORT_10, MPI_POINTER PTR_CONFIG_PAGE_FC_PORT_10, +} CONFIG_PAGE_FC_PORT_10, MPI_POINTER PTR_CONFIG_PAGE_FC_PORT_10, FCPortPage10_t, MPI_POINTER pFCPortPage10_t; -#define MPI_FCPORTPAGE10_PAGEVERSION (0x00) +#define MPI_FCPORTPAGE10_PAGEVERSION (0x01) /* standard MODDEF pin definitions (from GBIC spec.) */ #define MPI_FCPORTPAGE10_FLAGS_MODDEF_MASK (0x00000007) @@ -1534,7 +1894,7 @@ typedef struct _CONFIG_PAGE_FC_PORT_10 typedef struct _CONFIG_PAGE_FC_DEVICE_0 { - fCONFIG_PAGE_HEADER Header; /* 00h */ + CONFIG_PAGE_HEADER Header; /* 00h */ U64 WWNN; /* 04h */ U64 WWPN; /* 0Ch */ U32 PortIdentifier; /* 14h */ @@ -1548,7 +1908,7 @@ typedef struct _CONFIG_PAGE_FC_DEVICE_0 U8 FcPhHighestVersion; /* 21h */ U8 CurrentTargetID; /* 22h */ U8 CurrentBus; /* 23h */ -} fCONFIG_PAGE_FC_DEVICE_0, MPI_POINTER PTR_CONFIG_PAGE_FC_DEVICE_0, +} CONFIG_PAGE_FC_DEVICE_0, MPI_POINTER PTR_CONFIG_PAGE_FC_DEVICE_0, FCDevicePage0_t, MPI_POINTER pFCDevicePage0_t; #define MPI_FC_DEVICE_PAGE0_PAGEVERSION (0x03) @@ -1606,6 +1966,7 @@ typedef struct _RAID_VOL0_STATUS #define MPI_RAIDVOL0_STATUS_STATE_OPTIMAL (0x00) #define MPI_RAIDVOL0_STATUS_STATE_DEGRADED (0x01) #define MPI_RAIDVOL0_STATUS_STATE_FAILED (0x02) +#define MPI_RAIDVOL0_STATUS_STATE_MISSING (0x03) typedef struct _RAID_VOL0_SETTINGS { @@ -1616,11 +1977,11 @@ typedef struct _RAID_VOL0_SETTINGS RaidVol0Settings, MPI_POINTER pRaidVol0Settings; /* RAID Volume Page 0 VolumeSettings defines */ - #define MPI_RAIDVOL0_SETTING_WRITE_CACHING_ENABLE (0x0001) #define MPI_RAIDVOL0_SETTING_OFFLINE_ON_SMART (0x0002) #define MPI_RAIDVOL0_SETTING_AUTO_CONFIGURE (0x0004) #define MPI_RAIDVOL0_SETTING_PRIORITY_RESYNC (0x0008) +#define MPI_RAIDVOL0_SETTING_FAST_DATA_SCRUBBING_0102 (0x0020) /* obsolete */ #define MPI_RAIDVOL0_SETTING_USE_PRODUCT_ID_SUFFIX (0x0010) #define MPI_RAIDVOL0_SETTING_USE_DEFAULTS (0x8000) @@ -1644,7 +2005,7 @@ typedef struct _RAID_VOL0_SETTINGS typedef struct _CONFIG_PAGE_RAID_VOL_0 { - fCONFIG_PAGE_HEADER Header; /* 00h */ + CONFIG_PAGE_HEADER Header; /* 00h */ U8 VolumeID; /* 04h */ U8 VolumeBus; /* 05h */ U8 VolumeIOC; /* 06h */ @@ -1657,13 +2018,41 @@ typedef struct _CONFIG_PAGE_RAID_VOL_0 U32 Reserved2; /* 1Ch */ U32 Reserved3; /* 20h */ U8 NumPhysDisks; /* 24h */ - U8 Reserved4; /* 25h */ - U16 Reserved5; /* 26h */ + U8 DataScrubRate; /* 25h */ + U8 ResyncRate; /* 26h */ + U8 InactiveStatus; /* 27h */ RAID_VOL0_PHYS_DISK PhysDisk[MPI_RAID_VOL_PAGE_0_PHYSDISK_MAX];/* 28h */ -} fCONFIG_PAGE_RAID_VOL_0, MPI_POINTER PTR_CONFIG_PAGE_RAID_VOL_0, +} CONFIG_PAGE_RAID_VOL_0, MPI_POINTER PTR_CONFIG_PAGE_RAID_VOL_0, RaidVolumePage0_t, MPI_POINTER pRaidVolumePage0_t; -#define MPI_RAIDVOLPAGE0_PAGEVERSION (0x01) +#define MPI_RAIDVOLPAGE0_PAGEVERSION (0x04) + +/* values for RAID Volume Page 0 InactiveStatus field */ +#define MPI_RAIDVOLPAGE0_UNKNOWN_INACTIVE (0x00) +#define MPI_RAIDVOLPAGE0_STALE_METADATA_INACTIVE (0x01) +#define MPI_RAIDVOLPAGE0_FOREIGN_VOLUME_INACTIVE (0x02) +#define MPI_RAIDVOLPAGE0_INSUFFICIENT_RESOURCE_INACTIVE (0x03) +#define MPI_RAIDVOLPAGE0_CLONE_VOLUME_INACTIVE (0x04) +#define MPI_RAIDVOLPAGE0_INSUFFICIENT_METADATA_INACTIVE (0x05) +#define MPI_RAIDVOLPAGE0_PREVIOUSLY_DELETED (0x06) + + +typedef struct _CONFIG_PAGE_RAID_VOL_1 +{ + CONFIG_PAGE_HEADER Header; /* 00h */ + U8 VolumeID; /* 01h */ + U8 VolumeBus; /* 02h */ + U8 VolumeIOC; /* 03h */ + U8 Reserved0; /* 04h */ + U8 GUID[24]; /* 05h */ + U8 Name[32]; /* 20h */ + U64 WWID; /* 40h */ + U32 Reserved1; /* 48h */ + U32 Reserved2; /* 4Ch */ +} CONFIG_PAGE_RAID_VOL_1, MPI_POINTER PTR_CONFIG_PAGE_RAID_VOL_1, + RaidVolumePage1_t, MPI_POINTER pRaidVolumePage1_t; + +#define MPI_RAIDVOLPAGE1_PAGEVERSION (0x01) /**************************************************************************** @@ -1714,6 +2103,7 @@ typedef struct _RAID_PHYS_DISK0_STATUS #define MPI_PHYSDISK0_STATUS_FLAG_OUT_OF_SYNC (0x01) #define MPI_PHYSDISK0_STATUS_FLAG_QUIESCED (0x02) +#define MPI_PHYSDISK0_STATUS_FLAG_INACTIVE_VOLUME (0x04) #define MPI_PHYSDISK0_STATUS_ONLINE (0x00) #define MPI_PHYSDISK0_STATUS_MISSING (0x01) @@ -1726,24 +2116,54 @@ typedef struct _RAID_PHYS_DISK0_STATUS typedef struct _CONFIG_PAGE_RAID_PHYS_DISK_0 { - fCONFIG_PAGE_HEADER Header; /* 00h */ + CONFIG_PAGE_HEADER Header; /* 00h */ U8 PhysDiskID; /* 04h */ U8 PhysDiskBus; /* 05h */ U8 PhysDiskIOC; /* 06h */ U8 PhysDiskNum; /* 07h */ RAID_PHYS_DISK0_SETTINGS PhysDiskSettings; /* 08h */ U32 Reserved1; /* 0Ch */ - U32 Reserved2; /* 10h */ - U32 Reserved3; /* 14h */ + U8 ExtDiskIdentifier[8]; /* 10h */ U8 DiskIdentifier[16]; /* 18h */ RAID_PHYS_DISK0_INQUIRY_DATA InquiryData; /* 28h */ RAID_PHYS_DISK0_STATUS PhysDiskStatus; /* 64h */ U32 MaxLBA; /* 68h */ RAID_PHYS_DISK0_ERROR_DATA ErrorData; /* 6Ch */ -} fCONFIG_PAGE_RAID_PHYS_DISK_0, MPI_POINTER PTR_CONFIG_PAGE_RAID_PHYS_DISK_0, +} CONFIG_PAGE_RAID_PHYS_DISK_0, MPI_POINTER PTR_CONFIG_PAGE_RAID_PHYS_DISK_0, RaidPhysDiskPage0_t, MPI_POINTER pRaidPhysDiskPage0_t; -#define MPI_RAIDPHYSDISKPAGE0_PAGEVERSION (0x00) +#define MPI_RAIDPHYSDISKPAGE0_PAGEVERSION (0x01) + + +typedef struct _RAID_PHYS_DISK1_PATH +{ + U8 PhysDiskID; /* 00h */ + U8 PhysDiskBus; /* 01h */ + U16 Reserved1; /* 02h */ + U64 WWID; /* 04h */ + U64 OwnerWWID; /* 0Ch */ + U8 OwnerIdentifier; /* 14h */ + U8 Reserved2; /* 15h */ + U16 Flags; /* 16h */ +} RAID_PHYS_DISK1_PATH, MPI_POINTER PTR_RAID_PHYS_DISK1_PATH, + RaidPhysDisk1Path_t, MPI_POINTER pRaidPhysDisk1Path_t; + +/* RAID Physical Disk Page 1 Flags field defines */ +#define MPI_RAID_PHYSDISK1_FLAG_BROKEN (0x0002) +#define MPI_RAID_PHYSDISK1_FLAG_INVALID (0x0001) + +typedef struct _CONFIG_PAGE_RAID_PHYS_DISK_1 +{ + CONFIG_PAGE_HEADER Header; /* 00h */ + U8 NumPhysDiskPaths; /* 04h */ + U8 PhysDiskNum; /* 05h */ + U16 Reserved2; /* 06h */ + U32 Reserved1; /* 08h */ + RAID_PHYS_DISK1_PATH Path[1]; /* 0Ch */ +} CONFIG_PAGE_RAID_PHYS_DISK_1, MPI_POINTER PTR_CONFIG_PAGE_RAID_PHYS_DISK_1, + RaidPhysDiskPage1_t, MPI_POINTER pRaidPhysDiskPage1_t; + +#define MPI_RAIDPHYSDISKPAGE1_PAGEVERSION (0x00) /**************************************************************************** @@ -1756,7 +2176,7 @@ typedef struct _CONFIG_PAGE_LAN_0 U16 TxRxModes; /* 04h */ U16 Reserved; /* 06h */ U32 PacketPrePad; /* 08h */ -} fCONFIG_PAGE_LAN_0, MPI_POINTER PTR_CONFIG_PAGE_LAN_0, +} CONFIG_PAGE_LAN_0, MPI_POINTER PTR_CONFIG_PAGE_LAN_0, LANPage0_t, MPI_POINTER pLANPage0_t; #define MPI_LAN_PAGE0_PAGEVERSION (0x01) @@ -1781,7 +2201,7 @@ typedef struct _CONFIG_PAGE_LAN_1 U32 MaxReplySize; /* 24h */ U32 NegWireSpeedLow; /* 28h */ U32 NegWireSpeedHigh; /* 2Ch */ -} fCONFIG_PAGE_LAN_1, MPI_POINTER PTR_CONFIG_PAGE_LAN_1, +} CONFIG_PAGE_LAN_1, MPI_POINTER PTR_CONFIG_PAGE_LAN_1, LANPage1_t, MPI_POINTER pLANPage1_t; #define MPI_LAN_PAGE1_PAGEVERSION (0x03) @@ -1796,11 +2216,11 @@ typedef struct _CONFIG_PAGE_LAN_1 typedef struct _CONFIG_PAGE_INBAND_0 { - fCONFIG_PAGE_HEADER Header; /* 00h */ + CONFIG_PAGE_HEADER Header; /* 00h */ MPI_VERSION_FORMAT InbandVersion; /* 04h */ U16 MaximumBuffers; /* 08h */ U16 Reserved1; /* 0Ah */ -} fCONFIG_PAGE_INBAND_0, MPI_POINTER PTR_CONFIG_PAGE_INBAND_0, +} CONFIG_PAGE_INBAND_0, MPI_POINTER PTR_CONFIG_PAGE_INBAND_0, InbandPage0_t, MPI_POINTER pInbandPage0_t; #define MPI_INBAND_PAGEVERSION (0x00) @@ -1820,7 +2240,7 @@ typedef struct _MPI_SAS_IO_UNIT0_PHY_DATA U32 ControllerPhyDeviceInfo;/* 04h */ U16 AttachedDeviceHandle; /* 08h */ U16 ControllerDevHandle; /* 0Ah */ - U32 Reserved2; /* 0Ch */ + U32 DiscoveryStatus; /* 0Ch */ } MPI_SAS_IO_UNIT0_PHY_DATA, MPI_POINTER PTR_MPI_SAS_IO_UNIT0_PHY_DATA, SasIOUnit0PhyData, MPI_POINTER pSasIOUnit0PhyData; @@ -1834,22 +2254,21 @@ typedef struct _MPI_SAS_IO_UNIT0_PHY_DATA typedef struct _CONFIG_PAGE_SAS_IO_UNIT_0 { - fCONFIG_EXTENDED_PAGE_HEADER Header; /* 00h */ + CONFIG_EXTENDED_PAGE_HEADER Header; /* 00h */ U32 Reserved1; /* 08h */ U8 NumPhys; /* 0Ch */ U8 Reserved2; /* 0Dh */ U16 Reserved3; /* 0Eh */ MPI_SAS_IO_UNIT0_PHY_DATA PhyData[MPI_SAS_IOUNIT0_PHY_MAX]; /* 10h */ -} fCONFIG_PAGE_SAS_IO_UNIT_0, MPI_POINTER PTR_CONFIG_PAGE_SAS_IO_UNIT_0, +} CONFIG_PAGE_SAS_IO_UNIT_0, MPI_POINTER PTR_CONFIG_PAGE_SAS_IO_UNIT_0, SasIOUnitPage0_t, MPI_POINTER pSasIOUnitPage0_t; -#define MPI_SASIOUNITPAGE0_PAGEVERSION (0x00) +#define MPI_SASIOUNITPAGE0_PAGEVERSION (0x02) /* values for SAS IO Unit Page 0 PortFlags */ #define MPI_SAS_IOUNIT0_PORT_FLAGS_DISCOVERY_IN_PROGRESS (0x08) #define MPI_SAS_IOUNIT0_PORT_FLAGS_0_TARGET_IOC_NUM (0x00) #define MPI_SAS_IOUNIT0_PORT_FLAGS_1_TARGET_IOC_NUM (0x04) -#define MPI_SAS_IOUNIT0_PORT_FLAGS_WAIT_FOR_PORTENABLE (0x02) #define MPI_SAS_IOUNIT0_PORT_FLAGS_AUTO_PORT_CONFIG (0x01) /* values for SAS IO Unit Page 0 PhyFlags */ @@ -1867,6 +2286,20 @@ typedef struct _CONFIG_PAGE_SAS_IO_UNIT_0 /* see mpi_sas.h for values for SAS IO Unit Page 0 ControllerPhyDeviceInfo values */ +/* values for SAS IO Unit Page 0 DiscoveryStatus */ +#define MPI_SAS_IOUNIT0_DS_LOOP_DETECTED (0x00000001) +#define MPI_SAS_IOUNIT0_DS_UNADDRESSABLE_DEVICE (0x00000002) +#define MPI_SAS_IOUNIT0_DS_MULTIPLE_PORTS (0x00000004) +#define MPI_SAS_IOUNIT0_DS_EXPANDER_ERR (0x00000008) +#define MPI_SAS_IOUNIT0_DS_SMP_TIMEOUT (0x00000010) +#define MPI_SAS_IOUNIT0_DS_OUT_ROUTE_ENTRIES (0x00000020) +#define MPI_SAS_IOUNIT0_DS_INDEX_NOT_EXIST (0x00000040) +#define MPI_SAS_IOUNIT0_DS_SMP_FUNCTION_FAILED (0x00000080) +#define MPI_SAS_IOUNIT0_DS_SMP_CRC_ERROR (0x00000100) +#define MPI_SAS_IOUNIT0_DS_SUBTRACTIVE_LINK (0x00000200) +#define MPI_SAS_IOUNIT0_DS_TABLE_LINK (0x00000400) +#define MPI_SAS_IOUNIT0_DS_UNSUPPORTED_DEVICE (0x00000800) + typedef struct _MPI_SAS_IO_UNIT1_PHY_DATA { @@ -1889,52 +2322,75 @@ typedef struct _MPI_SAS_IO_UNIT1_PHY_DATA typedef struct _CONFIG_PAGE_SAS_IO_UNIT_1 { - fCONFIG_EXTENDED_PAGE_HEADER Header; /* 00h */ - U32 Reserved1; /* 08h */ - U8 NumPhys; /* 0Ch */ - U8 Reserved2; /* 0Dh */ - U16 Reserved3; /* 0Eh */ - MPI_SAS_IO_UNIT1_PHY_DATA PhyData[MPI_SAS_IOUNIT1_PHY_MAX]; /* 10h */ -} fCONFIG_PAGE_SAS_IO_UNIT_1, MPI_POINTER PTR_CONFIG_PAGE_SAS_IO_UNIT_1, + CONFIG_EXTENDED_PAGE_HEADER Header; /* 00h */ + U16 ControlFlags; /* 08h */ + U16 MaxNumSATATargets; /* 0Ah */ + U32 Reserved1; /* 0Ch */ + U8 NumPhys; /* 10h */ + U8 SATAMaxQDepth; /* 11h */ + U16 Reserved2; /* 12h */ + MPI_SAS_IO_UNIT1_PHY_DATA PhyData[MPI_SAS_IOUNIT1_PHY_MAX]; /* 14h */ +} CONFIG_PAGE_SAS_IO_UNIT_1, MPI_POINTER PTR_CONFIG_PAGE_SAS_IO_UNIT_1, SasIOUnitPage1_t, MPI_POINTER pSasIOUnitPage1_t; -#define MPI_SASIOUNITPAGE1_PAGEVERSION (0x00) - -/* values for SAS IO Unit Page 0 PortFlags */ -#define MPI_SAS_IOUNIT1_PORT_FLAGS_0_TARGET_IOC_NUM (0x00) -#define MPI_SAS_IOUNIT1_PORT_FLAGS_1_TARGET_IOC_NUM (0x04) -#define MPI_SAS_IOUNIT1_PORT_FLAGS_WAIT_FOR_PORTENABLE (0x02) -#define MPI_SAS_IOUNIT1_PORT_FLAGS_AUTO_PORT_CONFIG (0x01) +#define MPI_SASIOUNITPAGE1_PAGEVERSION (0x04) + +/* values for SAS IO Unit Page 1 ControlFlags */ +#define MPI_SAS_IOUNIT1_CONTROL_SATA_3_0_MAX (0x4000) +#define MPI_SAS_IOUNIT1_CONTROL_SATA_1_5_MAX (0x2000) +#define MPI_SAS_IOUNIT1_CONTROL_SATA_SW_PRESERVE (0x1000) +#define MPI_SAS_IOUNIT1_CONTROL_DISABLE_SAS_HASH (0x0800) + +#define MPI_SAS_IOUNIT1_CONTROL_MASK_DEV_SUPPORT (0x0600) +#define MPI_SAS_IOUNIT1_CONTROL_SHIFT_DEV_SUPPORT (9) +#define MPI_SAS_IOUNIT1_CONTROL_DEV_SUPPORT_BOTH (0x00) +#define MPI_SAS_IOUNIT1_CONTROL_DEV_SAS_SUPPORT (0x01) +#define MPI_SAS_IOUNIT1_CONTROL_DEV_SATA_SUPPORT (0x10) + +#define MPI_SAS_IOUNIT1_CONTROL_AUTO_PORT_SAME_SAS_ADDR (0x0100) +#define MPI_SAS_IOUNIT1_CONTROL_SATA_48BIT_LBA_REQUIRED (0x0080) +#define MPI_SAS_IOUNIT1_CONTROL_SATA_SMART_REQUIRED (0x0040) +#define MPI_SAS_IOUNIT1_CONTROL_SATA_NCQ_REQUIRED (0x0020) +#define MPI_SAS_IOUNIT1_CONTROL_SATA_FUA_REQUIRED (0x0010) +#define MPI_SAS_IOUNIT1_CONTROL_PHY_ENABLE_ORDER_HIGH (0x0008) +#define MPI_SAS_IOUNIT1_CONTROL_SUBTRACTIVE_ILLEGAL (0x0004) +#define MPI_SAS_IOUNIT1_CONTROL_FIRST_LVL_DISC_ONLY (0x0002) +#define MPI_SAS_IOUNIT1_CONTROL_CLEAR_AFFILIATION (0x0001) + +/* values for SAS IO Unit Page 1 PortFlags */ +#define MPI_SAS_IOUNIT1_PORT_FLAGS_0_TARGET_IOC_NUM (0x00) +#define MPI_SAS_IOUNIT1_PORT_FLAGS_1_TARGET_IOC_NUM (0x04) +#define MPI_SAS_IOUNIT1_PORT_FLAGS_AUTO_PORT_CONFIG (0x01) /* values for SAS IO Unit Page 0 PhyFlags */ -#define MPI_SAS_IOUNIT1_PHY_FLAGS_PHY_DISABLE (0x04) -#define MPI_SAS_IOUNIT1_PHY_FLAGS_TX_INVERT (0x02) -#define MPI_SAS_IOUNIT1_PHY_FLAGS_RX_INVERT (0x01) +#define MPI_SAS_IOUNIT1_PHY_FLAGS_PHY_DISABLE (0x04) +#define MPI_SAS_IOUNIT1_PHY_FLAGS_TX_INVERT (0x02) +#define MPI_SAS_IOUNIT1_PHY_FLAGS_RX_INVERT (0x01) /* values for SAS IO Unit Page 0 MaxMinLinkRate */ -#define MPI_SAS_IOUNIT1_MAX_RATE_MASK (0xF0) -#define MPI_SAS_IOUNIT1_MAX_RATE_1_5 (0x80) -#define MPI_SAS_IOUNIT1_MAX_RATE_3_0 (0x90) -#define MPI_SAS_IOUNIT1_MIN_RATE_MASK (0x0F) -#define MPI_SAS_IOUNIT1_MIN_RATE_1_5 (0x08) -#define MPI_SAS_IOUNIT1_MIN_RATE_3_0 (0x09) +#define MPI_SAS_IOUNIT1_MAX_RATE_MASK (0xF0) +#define MPI_SAS_IOUNIT1_MAX_RATE_1_5 (0x80) +#define MPI_SAS_IOUNIT1_MAX_RATE_3_0 (0x90) +#define MPI_SAS_IOUNIT1_MIN_RATE_MASK (0x0F) +#define MPI_SAS_IOUNIT1_MIN_RATE_1_5 (0x08) +#define MPI_SAS_IOUNIT1_MIN_RATE_3_0 (0x09) /* see mpi_sas.h for values for SAS IO Unit Page 1 ControllerPhyDeviceInfo values */ typedef struct _CONFIG_PAGE_SAS_IO_UNIT_2 { - fCONFIG_EXTENDED_PAGE_HEADER Header; /* 00h */ + CONFIG_EXTENDED_PAGE_HEADER Header; /* 00h */ U32 Reserved1; /* 08h */ U16 MaxPersistentIDs; /* 0Ch */ U16 NumPersistentIDsUsed; /* 0Eh */ U8 Status; /* 10h */ U8 Flags; /* 11h */ - U16 Reserved2; /* 12h */ -} fCONFIG_PAGE_SAS_IO_UNIT_2, MPI_POINTER PTR_CONFIG_PAGE_SAS_IO_UNIT_2, + U16 MaxNumPhysicalMappedIDs;/* 12h */ /* 12h */ +} CONFIG_PAGE_SAS_IO_UNIT_2, MPI_POINTER PTR_CONFIG_PAGE_SAS_IO_UNIT_2, SasIOUnitPage2_t, MPI_POINTER pSasIOUnitPage2_t; -#define MPI_SASIOUNITPAGE2_PAGEVERSION (0x00) +#define MPI_SASIOUNITPAGE2_PAGEVERSION (0x03) /* values for SAS IO Unit Page 2 Status field */ #define MPI_SAS_IOUNIT2_STATUS_DISABLED_PERSISTENT_MAPPINGS (0x02) @@ -1942,11 +2398,19 @@ typedef struct _CONFIG_PAGE_SAS_IO_UNIT_2 /* values for SAS IO Unit Page 2 Flags field */ #define MPI_SAS_IOUNIT2_FLAGS_DISABLE_PERSISTENT_MAPPINGS (0x01) +/* Physical Mapping Modes */ +#define MPI_SAS_IOUNIT2_FLAGS_MASK_PHYS_MAP_MODE (0x0E) +#define MPI_SAS_IOUNIT2_FLAGS_SHIFT_PHYS_MAP_MODE (1) +#define MPI_SAS_IOUNIT2_FLAGS_NO_PHYS_MAP (0x00) +#define MPI_SAS_IOUNIT2_FLAGS_DIRECT_ATTACH_PHYS_MAP (0x01) +#define MPI_SAS_IOUNIT2_FLAGS_ENCLOSURE_SLOT_PHYS_MAP (0x02) + +#define MPI_SAS_IOUNIT2_FLAGS_RESERVE_ID_0_FOR_BOOT (0x10) typedef struct _CONFIG_PAGE_SAS_IO_UNIT_3 { - fCONFIG_EXTENDED_PAGE_HEADER Header; /* 00h */ + CONFIG_EXTENDED_PAGE_HEADER Header; /* 00h */ U32 Reserved1; /* 08h */ U32 MaxInvalidDwordCount; /* 0Ch */ U32 InvalidDwordCountTime; /* 10h */ @@ -1956,18 +2420,24 @@ typedef struct _CONFIG_PAGE_SAS_IO_UNIT_3 U32 LossDwordSynchCountTime; /* 20h */ U32 MaxPhyResetProblemCount; /* 24h */ U32 PhyResetProblemTime; /* 28h */ -} fCONFIG_PAGE_SAS_IO_UNIT_3, MPI_POINTER PTR_CONFIG_PAGE_SAS_IO_UNIT_3, +} CONFIG_PAGE_SAS_IO_UNIT_3, MPI_POINTER PTR_CONFIG_PAGE_SAS_IO_UNIT_3, SasIOUnitPage3_t, MPI_POINTER pSasIOUnitPage3_t; #define MPI_SASIOUNITPAGE3_PAGEVERSION (0x00) +/**************************************************************************** +* SAS Expander Config Pages +****************************************************************************/ + typedef struct _CONFIG_PAGE_SAS_EXPANDER_0 { - fCONFIG_EXTENDED_PAGE_HEADER Header; /* 00h */ - U32 Reserved1; /* 08h */ + CONFIG_EXTENDED_PAGE_HEADER Header; /* 00h */ + U8 PhysicalPort; /* 08h */ + U8 Reserved1; /* 09h */ + U16 Reserved2; /* 0Ah */ U64 SASAddress; /* 0Ch */ - U32 Reserved2; /* 14h */ + U32 DiscoveryStatus; /* 14h */ U16 DevHandle; /* 18h */ U16 ParentDevHandle; /* 1Ah */ U16 ExpanderChangeCount; /* 1Ch */ @@ -1976,45 +2446,127 @@ typedef struct _CONFIG_PAGE_SAS_EXPANDER_0 U8 SASLevel; /* 21h */ U8 Flags; /* 22h */ U8 Reserved3; /* 23h */ -} fCONFIG_PAGE_SAS_EXPANDER_0, MPI_POINTER PTR_CONFIG_PAGE_SAS_EXPANDER_0, +} CONFIG_PAGE_SAS_EXPANDER_0, MPI_POINTER PTR_CONFIG_PAGE_SAS_EXPANDER_0, SasExpanderPage0_t, MPI_POINTER pSasExpanderPage0_t; -#define MPI_SASEXPANDER0_PAGEVERSION (0x00) +#define MPI_SASEXPANDER0_PAGEVERSION (0x02) + +/* values for SAS Expander Page 0 DiscoveryStatus field */ +#define MPI_SAS_EXPANDER0_DS_LOOP_DETECTED (0x00000001) +#define MPI_SAS_EXPANDER0_DS_UNADDRESSABLE_DEVICE (0x00000002) +#define MPI_SAS_EXPANDER0_DS_MULTIPLE_PORTS (0x00000004) +#define MPI_SAS_EXPANDER0_DS_EXPANDER_ERR (0x00000008) +#define MPI_SAS_EXPANDER0_DS_SMP_TIMEOUT (0x00000010) +#define MPI_SAS_EXPANDER0_DS_OUT_ROUTE_ENTRIES (0x00000020) +#define MPI_SAS_EXPANDER0_DS_INDEX_NOT_EXIST (0x00000040) +#define MPI_SAS_EXPANDER0_DS_SMP_FUNCTION_FAILED (0x00000080) +#define MPI_SAS_EXPANDER0_DS_SMP_CRC_ERROR (0x00000100) +#define MPI_SAS_EXPANDER0_DS_SUBTRACTIVE_LINK (0x00000200) +#define MPI_SAS_EXPANDER0_DS_TABLE_LINK (0x00000400) +#define MPI_SAS_EXPANDER0_DS_UNSUPPORTED_DEVICE (0x00000800) /* values for SAS Expander Page 0 Flags field */ #define MPI_SAS_EXPANDER0_FLAGS_ROUTE_TABLE_CONFIG (0x02) #define MPI_SAS_EXPANDER0_FLAGS_CONFIG_IN_PROGRESS (0x01) +typedef struct _CONFIG_PAGE_SAS_EXPANDER_1 +{ + CONFIG_EXTENDED_PAGE_HEADER Header; /* 00h */ + U8 PhysicalPort; /* 08h */ + U8 Reserved1; /* 09h */ + U16 Reserved2; /* 0Ah */ + U8 NumPhys; /* 0Ch */ + U8 Phy; /* 0Dh */ + U16 NumTableEntriesProgrammed; /* 0Eh */ + U8 ProgrammedLinkRate; /* 10h */ + U8 HwLinkRate; /* 11h */ + U16 AttachedDevHandle; /* 12h */ + U32 PhyInfo; /* 14h */ + U32 AttachedDeviceInfo; /* 18h */ + U16 OwnerDevHandle; /* 1Ch */ + U8 ChangeCount; /* 1Eh */ + U8 NegotiatedLinkRate; /* 1Fh */ + U8 PhyIdentifier; /* 20h */ + U8 AttachedPhyIdentifier; /* 21h */ + U8 NumTableEntriesProg; /* 22h */ + U8 DiscoveryInfo; /* 23h */ + U32 Reserved3; /* 24h */ +} CONFIG_PAGE_SAS_EXPANDER_1, MPI_POINTER PTR_CONFIG_PAGE_SAS_EXPANDER_1, + SasExpanderPage1_t, MPI_POINTER pSasExpanderPage1_t; + +#define MPI_SASEXPANDER1_PAGEVERSION (0x01) + +/* use MPI_SAS_PHY0_PRATE_ defines for ProgrammedLinkRate */ + +/* use MPI_SAS_PHY0_HWRATE_ defines for HwLinkRate */ + +/* use MPI_SAS_PHY0_PHYINFO_ defines for PhyInfo */ + +/* see mpi_sas.h for values for SAS Expander Page 1 AttachedDeviceInfo values */ + +/* values for SAS Expander Page 1 DiscoveryInfo field */ +#define MPI_SAS_EXPANDER1_DISCINFO_BAD_PHY DISABLED (0x04) +#define MPI_SAS_EXPANDER1_DISCINFO_LINK_STATUS_CHANGE (0x02) +#define MPI_SAS_EXPANDER1_DISCINFO_NO_ROUTING_ENTRIES (0x01) + +/* values for SAS Expander Page 1 NegotiatedLinkRate field */ +#define MPI_SAS_EXPANDER1_NEG_RATE_UNKNOWN (0x00) +#define MPI_SAS_EXPANDER1_NEG_RATE_PHY_DISABLED (0x01) +#define MPI_SAS_EXPANDER1_NEG_RATE_FAILED_NEGOTIATION (0x02) +#define MPI_SAS_EXPANDER1_NEG_RATE_SATA_OOB_COMPLETE (0x03) +#define MPI_SAS_EXPANDER1_NEG_RATE_1_5 (0x08) +#define MPI_SAS_EXPANDER1_NEG_RATE_3_0 (0x09) + + +/**************************************************************************** +* SAS Device Config Pages +****************************************************************************/ + typedef struct _CONFIG_PAGE_SAS_DEVICE_0 { - fCONFIG_EXTENDED_PAGE_HEADER Header; /* 00h */ - U32 Reserved1; /* 08h */ + CONFIG_EXTENDED_PAGE_HEADER Header; /* 00h */ + U16 Slot; /* 08h */ + U16 EnclosureHandle; /* 0Ah */ U64 SASAddress; /* 0Ch */ - U32 Reserved2; /* 14h */ + U16 ParentDevHandle; /* 14h */ + U8 PhyNum; /* 16h */ + U8 AccessStatus; /* 17h */ U16 DevHandle; /* 18h */ U8 TargetID; /* 1Ah */ U8 Bus; /* 1Bh */ U32 DeviceInfo; /* 1Ch */ U16 Flags; /* 20h */ U8 PhysicalPort; /* 22h */ - U8 Reserved3; /* 23h */ -} fCONFIG_PAGE_SAS_DEVICE_0, MPI_POINTER PTR_CONFIG_PAGE_SAS_DEVICE_0, + U8 Reserved2; /* 23h */ +} CONFIG_PAGE_SAS_DEVICE_0, MPI_POINTER PTR_CONFIG_PAGE_SAS_DEVICE_0, SasDevicePage0_t, MPI_POINTER pSasDevicePage0_t; -#define MPI_SASDEVICE0_PAGEVERSION (0x00) +#define MPI_SASDEVICE0_PAGEVERSION (0x04) + +/* values for SAS Device Page 0 AccessStatus field */ +#define MPI_SAS_DEVICE0_ASTATUS_NO_ERRORS (0x00) +#define MPI_SAS_DEVICE0_ASTATUS_SATA_INIT_FAILED (0x01) +#define MPI_SAS_DEVICE0_ASTATUS_SATA_CAPABILITY_FAILED (0x02) /* values for SAS Device Page 0 Flags field */ -#define MPI_SAS_DEVICE0_FLAGS_MAPPING_PERSISTENT (0x04) -#define MPI_SAS_DEVICE0_FLAGS_DEVICE_MAPPED (0x02) -#define MPI_SAS_DEVICE0_FLAGS_DEVICE_PRESENT (0x01) +#define MPI_SAS_DEVICE0_FLAGS_SATA_SW_PRESERVE (0x0200) +#define MPI_SAS_DEVICE0_FLAGS_UNSUPPORTED_DEVICE (0x0100) +#define MPI_SAS_DEVICE0_FLAGS_SATA_48BIT_LBA_SUPPORTED (0x0080) +#define MPI_SAS_DEVICE0_FLAGS_SATA_SMART_SUPPORTED (0x0040) +#define MPI_SAS_DEVICE0_FLAGS_SATA_NCQ_SUPPORTED (0x0020) +#define MPI_SAS_DEVICE0_FLAGS_SATA_FUA_SUPPORTED (0x0010) +#define MPI_SAS_DEVICE0_FLAGS_PORT_SELECTOR_ATTACH (0x0008) +#define MPI_SAS_DEVICE0_FLAGS_MAPPING_PERSISTENT (0x0004) +#define MPI_SAS_DEVICE0_FLAGS_DEVICE_MAPPED (0x0002) +#define MPI_SAS_DEVICE0_FLAGS_DEVICE_PRESENT (0x0001) /* see mpi_sas.h for values for SAS Device Page 0 DeviceInfo values */ typedef struct _CONFIG_PAGE_SAS_DEVICE_1 { - fCONFIG_EXTENDED_PAGE_HEADER Header; /* 00h */ + CONFIG_EXTENDED_PAGE_HEADER Header; /* 00h */ U32 Reserved1; /* 08h */ U64 SASAddress; /* 0Ch */ U32 Reserved2; /* 14h */ @@ -2022,15 +2574,30 @@ typedef struct _CONFIG_PAGE_SAS_DEVICE_1 U8 TargetID; /* 1Ah */ U8 Bus; /* 1Bh */ U8 InitialRegDeviceFIS[20];/* 1Ch */ -} fCONFIG_PAGE_SAS_DEVICE_1, MPI_POINTER PTR_CONFIG_PAGE_SAS_DEVICE_1, +} CONFIG_PAGE_SAS_DEVICE_1, MPI_POINTER PTR_CONFIG_PAGE_SAS_DEVICE_1, SasDevicePage1_t, MPI_POINTER pSasDevicePage1_t; #define MPI_SASDEVICE1_PAGEVERSION (0x00) +typedef struct _CONFIG_PAGE_SAS_DEVICE_2 +{ + CONFIG_EXTENDED_PAGE_HEADER Header; /* 00h */ + U64 PhysicalIdentifier; /* 08h */ + U32 Reserved1; /* 10h */ +} CONFIG_PAGE_SAS_DEVICE_2, MPI_POINTER PTR_CONFIG_PAGE_SAS_DEVICE_2, + SasDevicePage2_t, MPI_POINTER pSasDevicePage2_t; + +#define MPI_SASDEVICE2_PAGEVERSION (0x00) + + +/**************************************************************************** +* SAS PHY Config Pages +****************************************************************************/ + typedef struct _CONFIG_PAGE_SAS_PHY_0 { - fCONFIG_EXTENDED_PAGE_HEADER Header; /* 00h */ + CONFIG_EXTENDED_PAGE_HEADER Header; /* 00h */ U32 Reserved1; /* 08h */ U64 SASAddress; /* 0Ch */ U16 AttachedDevHandle; /* 14h */ @@ -2042,7 +2609,7 @@ typedef struct _CONFIG_PAGE_SAS_PHY_0 U8 ChangeCount; /* 22h */ U8 Reserved3; /* 23h */ U32 PhyInfo; /* 24h */ -} fCONFIG_PAGE_SAS_PHY_0, MPI_POINTER PTR_CONFIG_PAGE_SAS_PHY_0, +} CONFIG_PAGE_SAS_PHY_0, MPI_POINTER PTR_CONFIG_PAGE_SAS_PHY_0, SasPhyPage0_t, MPI_POINTER pSasPhyPage0_t; #define MPI_SASPHY0_PAGEVERSION (0x00) @@ -2089,17 +2656,95 @@ typedef struct _CONFIG_PAGE_SAS_PHY_0 typedef struct _CONFIG_PAGE_SAS_PHY_1 { - fCONFIG_EXTENDED_PAGE_HEADER Header; /* 00h */ + CONFIG_EXTENDED_PAGE_HEADER Header; /* 00h */ U32 Reserved1; /* 08h */ U32 InvalidDwordCount; /* 0Ch */ U32 RunningDisparityErrorCount; /* 10h */ U32 LossDwordSynchCount; /* 14h */ U32 PhyResetProblemCount; /* 18h */ -} fCONFIG_PAGE_SAS_PHY_1, MPI_POINTER PTR_CONFIG_PAGE_SAS_PHY_1, +} CONFIG_PAGE_SAS_PHY_1, MPI_POINTER PTR_CONFIG_PAGE_SAS_PHY_1, SasPhyPage1_t, MPI_POINTER pSasPhyPage1_t; #define MPI_SASPHY1_PAGEVERSION (0x00) +/**************************************************************************** +* SAS Enclosure Config Pages +****************************************************************************/ + +typedef struct _CONFIG_PAGE_SAS_ENCLOSURE_0 +{ + CONFIG_EXTENDED_PAGE_HEADER Header; /* 00h */ + U32 Reserved1; /* 08h */ + U64 EnclosureLogicalID; /* 0Ch */ + U16 Flags; /* 14h */ + U16 EnclosureHandle; /* 16h */ + U16 NumSlots; /* 18h */ + U16 StartSlot; /* 1Ah */ + U8 StartTargetID; /* 1Ch */ + U8 StartBus; /* 1Dh */ + U8 SEPTargetID; /* 1Eh */ + U8 SEPBus; /* 1Fh */ + U32 Reserved2; /* 20h */ + U32 Reserved3; /* 24h */ +} CONFIG_PAGE_SAS_ENCLOSURE_0, MPI_POINTER PTR_CONFIG_PAGE_SAS_ENCLOSURE_0, + SasEnclosurePage0_t, MPI_POINTER pSasEnclosurePage0_t; + +#define MPI_SASENCLOSURE0_PAGEVERSION (0x00) + +/* values for SAS Enclosure Page 0 Flags field */ +#define MPI_SAS_ENCLS0_FLAGS_SEP_BUS_ID_VALID (0x0020) +#define MPI_SAS_ENCLS0_FLAGS_START_BUS_ID_VALID (0x0010) + +#define MPI_SAS_ENCLS0_FLAGS_MNG_MASK (0x000F) +#define MPI_SAS_ENCLS0_FLAGS_MNG_UNKNOWN (0x0000) +#define MPI_SAS_ENCLS0_FLAGS_MNG_IOC_SES (0x0001) +#define MPI_SAS_ENCLS0_FLAGS_MNG_IOC_SGPIO (0x0002) +#define MPI_SAS_ENCLS0_FLAGS_MNG_EXP_SGPIO (0x0003) +#define MPI_SAS_ENCLS0_FLAGS_MNG_SES_ENCLOSURE (0x0004) + + +/**************************************************************************** +* Log Config Pages +****************************************************************************/ +/* + * Host code (drivers, BIOS, utilities, etc.) should leave this define set to + * one and check NumLogEntries at runtime. + */ +#ifndef MPI_LOG_0_NUM_LOG_ENTRIES +#define MPI_LOG_0_NUM_LOG_ENTRIES (1) +#endif + +#define MPI_LOG_0_LOG_DATA_LENGTH (20) + +typedef struct _MPI_LOG_0_ENTRY +{ + U64 WWID; /* 00h */ + U32 TimeStamp; /* 08h */ + U32 Reserved1; /* 0Ch */ + U16 LogSequence; /* 10h */ + U16 LogEntryQualifier; /* 12h */ + U8 LogData[MPI_LOG_0_LOG_DATA_LENGTH]; /* 14h */ +} MPI_LOG_0_ENTRY, MPI_POINTER PTR_MPI_LOG_0_ENTRY, + MpiLog0Entry_t, MPI_POINTER pMpiLog0Entry_t; + +/* values for Log Page 0 LogEntry LogEntryQualifier field */ +#define MPI_LOG_0_ENTRY_QUAL_ENTRY_UNUSED (0x0000) +#define MPI_LOG_0_ENTRY_QUAL_POWER_ON_RESET (0x0001) + +typedef struct _CONFIG_PAGE_LOG_0 +{ + CONFIG_EXTENDED_PAGE_HEADER Header; /* 00h */ + U32 Reserved1; /* 08h */ + U32 Reserved2; /* 0Ch */ + U16 NumLogEntries; /* 10h */ + U16 Reserved3; /* 12h */ + MPI_LOG_0_ENTRY LogEntry[MPI_LOG_0_NUM_LOG_ENTRIES]; /* 14h */ +} CONFIG_PAGE_LOG_0, MPI_POINTER PTR_CONFIG_PAGE_LOG_0, + LogPage0_t, MPI_POINTER pLogPage0_t; + +#define MPI_LOG_0_PAGEVERSION (0x00) + + #endif diff --git a/drivers/message/fusion/lsi/mpi_fc.h b/drivers/message/fusion/lsi/mpi_fc.h index ea266b236c1..51a6aeb990b 100644 --- a/drivers/message/fusion/lsi/mpi_fc.h +++ b/drivers/message/fusion/lsi/mpi_fc.h @@ -1,12 +1,12 @@ /* - * Copyright (c) 2000-2003 LSI Logic Corporation. + * Copyright (c) 2000-2004 LSI Logic Corporation. * * * Name: mpi_fc.h * Title: MPI Fibre Channel messages and structures * Creation Date: June 12, 2000 * - * mpi_fc.h Version: 01.05.xx + * mpi_fc.h Version: 01.05.01 * * Version History * --------------- @@ -36,6 +36,9 @@ * 09-28-01 01.02.02 Change name of reserved field in * MSG_LINK_SERVICE_RSP_REPLY. * 05-31-02 01.02.03 Adding AliasIndex to FC Direct Access requests. + * 01-16-04 01.02.04 Added define for MPI_FC_PRIM_SEND_FLAGS_ML_RESET_LINK. + * 05-11-04 01.03.01 Original release for MPI v1.3. + * 08-19-04 01.05.01 Original release for MPI v1.5. * -------------------------------------------------------------------------- */ diff --git a/drivers/message/fusion/lsi/mpi_history.txt b/drivers/message/fusion/lsi/mpi_history.txt index 0deb7721e93..c9edbee41ed 100644 --- a/drivers/message/fusion/lsi/mpi_history.txt +++ b/drivers/message/fusion/lsi/mpi_history.txt @@ -3,25 +3,28 @@ MPI Header File Change History ============================== - Copyright (c) 2000-2001 LSI Logic Corporation. + Copyright (c) 2000-2005 LSI Logic Corporation. --------------------------------------- - Header Set Release Version: 01.01.10 - Header Set Release Date: 04-09-01 + Header Set Release Version: 01.05.09 + Header Set Release Date: 03-11-05 --------------------------------------- Filename Current version Prior version ---------- --------------- ------------- - mpi.h 01.01.07 01.01.06 - mpi_ioc.h 01.01.07 01.01.06 - mpi_cnfg.h 01.01.11 01.01.10 - mpi_init.h 01.01.05 01.01.04 - mpi_targ.h 01.01.04 01.01.04 - mpi_fc.h 01.01.07 01.01.06 - mpi_lan.h 01.01.03 01.01.03 - mpi_raid.h 01.01.02 01.01.02 - mpi_type.h 01.01.02 01.01.02 - mpi_history.txt 01.01.09 01.01.09 + mpi.h 01.05.07 01.05.06 + mpi_ioc.h 01.05.08 01.05.07 + mpi_cnfg.h 01.05.08 01.05.07 + mpi_init.h 01.05.04 01.05.03 + mpi_targ.h 01.05.04 01.05.03 + mpi_fc.h 01.05.01 01.05.01 + mpi_lan.h 01.05.01 01.05.01 + mpi_raid.h 01.05.02 01.05.02 + mpi_tool.h 01.05.03 01.05.03 + mpi_inb.h 01.05.01 01.05.01 + mpi_sas.h 01.05.01 01.05.01 + mpi_type.h 01.05.01 01.05.01 + mpi_history.txt 01.05.09 01.05.08 * Date Version Description @@ -53,6 +56,38 @@ mpi.h * Added function codes for RAID. * 04-09-01 01.01.07 Added alternate define for MPI_DOORBELL_ACTIVE, * MPI_DOORBELL_USED, to better match the spec. + * 08-08-01 01.02.01 Original release for v1.2 work. + * Changed MPI_VERSION_MINOR from 0x01 to 0x02. + * Added define MPI_FUNCTION_TOOLBOX. + * 09-28-01 01.02.02 New function code MPI_SCSI_ENCLOSURE_PROCESSOR. + * 11-01-01 01.02.03 Changed name to MPI_FUNCTION_SCSI_ENCLOSURE_PROCESSOR. + * 03-14-02 01.02.04 Added MPI_HEADER_VERSION_ defines. + * 05-31-02 01.02.05 Bumped MPI_HEADER_VERSION_UNIT. + * 07-12-02 01.02.06 Added define for MPI_FUNCTION_MAILBOX. + * 09-16-02 01.02.07 Bumped value for MPI_HEADER_VERSION_UNIT. + * 11-15-02 01.02.08 Added define MPI_IOCSTATUS_TARGET_INVALID_IO_INDEX and + * obsoleted define MPI_IOCSTATUS_TARGET_INVALID_IOCINDEX. + * 04-01-03 01.02.09 New IOCStatus code: MPI_IOCSTATUS_FC_EXCHANGE_CANCELED + * 06-26-03 01.02.10 Bumped MPI_HEADER_VERSION_UNIT value. + * 01-16-04 01.02.11 Added define for MPI_IOCLOGINFO_TYPE_SHIFT. + * 04-29-04 01.02.12 Added function codes for MPI_FUNCTION_DIAG_BUFFER_POST + * and MPI_FUNCTION_DIAG_RELEASE. + * Added MPI_IOCSTATUS_DIAGNOSTIC_RELEASED define. + * Bumped MPI_HEADER_VERSION_UNIT value. + * 05-11-04 01.03.01 Bumped MPI_VERSION_MINOR for MPI v1.3. + * Added codes for Inband. + * 08-19-04 01.05.01 Added defines for Host Buffer Access Control doorbell. + * Added define for offset of High Priority Request Queue. + * Added new function codes and new IOCStatus codes. + * Added a IOCLogInfo type of SAS. + * 12-07-04 01.05.02 Bumped MPI_HEADER_VERSION_UNIT. + * 12-09-04 01.05.03 Bumped MPI_HEADER_VERSION_UNIT. + * 01-15-05 01.05.04 Bumped MPI_HEADER_VERSION_UNIT. + * 02-09-05 01.05.05 Bumped MPI_HEADER_VERSION_UNIT. + * 02-22-05 01.05.06 Bumped MPI_HEADER_VERSION_UNIT. + * 03-11-05 01.05.07 Removed function codes for SCSI IO 32 and + * TargetAssistExtended requests. + * Removed EEDP IOCStatus codes. * -------------------------------------------------------------------------- mpi_ioc.h @@ -81,6 +116,49 @@ mpi_ioc.h * 03-27-01 01.01.06 Added defines for ProductId field of MPI_FW_HEADER. * Added structure offset comments. * 04-09-01 01.01.07 Added structure EVENT_DATA_EVENT_CHANGE. + * 08-08-01 01.02.01 Original release for v1.2 work. + * New format for FWVersion and ProductId in + * MSG_IOC_FACTS_REPLY and MPI_FW_HEADER. + * 08-31-01 01.02.02 Addded event MPI_EVENT_SCSI_DEVICE_STATUS_CHANGE and + * related structure and defines. + * Added event MPI_EVENT_ON_BUS_TIMER_EXPIRED. + * Added MPI_IOCINIT_FLAGS_DISCARD_FW_IMAGE. + * Replaced a reserved field in MSG_IOC_FACTS_REPLY with + * IOCExceptions and changed DataImageSize to reserved. + * Added MPI_FW_DOWNLOAD_ITYPE_NVSTORE_DATA and + * MPI_FW_UPLOAD_ITYPE_NVDATA. + * 09-28-01 01.02.03 Modified Event Data for Integrated RAID. + * 11-01-01 01.02.04 Added defines for MPI_EXT_IMAGE_HEADER ImageType field. + * 03-14-02 01.02.05 Added HeaderVersion field to MSG_IOC_FACTS_REPLY. + * 05-31-02 01.02.06 Added define for + * MPI_IOCFACTS_EXCEPT_RAID_CONFIG_INVALID. + * Added AliasIndex to EVENT_DATA_LOGOUT structure. + * 04-01-03 01.02.07 Added defines for MPI_FW_HEADER_SIGNATURE_. + * 06-26-03 01.02.08 Added new values to the product family defines. + * 04-29-04 01.02.09 Added IOCCapabilities field to MSG_IOC_FACTS_REPLY and + * added related defines. + * 05-11-04 01.03.01 Original release for MPI v1.3. + * 08-19-04 01.05.01 Added four new fields to MSG_IOC_INIT. + * Added three new fields to MSG_IOC_FACTS_REPLY. + * Defined four new bits for the IOCCapabilities field of + * the IOCFacts reply. + * Added two new PortTypes for the PortFacts reply. + * Added six new events along with their EventData + * structures. + * Added a new MsgFlag to the FwDownload request to + * indicate last segment. + * Defined a new image type of boot loader. + * Added FW family codes for SAS product families. + * 10-05-04 01.05.02 Added ReplyFifoHostSignalingAddr field to + * MSG_IOC_FACTS_REPLY. + * 12-07-04 01.05.03 Added more defines for SAS Discovery Error event. + * 12-09-04 01.05.04 Added Unsupported device to SAS Device event. + * 01-15-05 01.05.05 Added event data for SAS SES Event. + * 02-09-05 01.05.06 Added MPI_FW_UPLOAD_ITYPE_FW_BACKUP define. + * 02-22-05 01.05.07 Added Host Page Buffer Persistent flag to IOC Facts + * Reply and IOC Init Request. + * 03-11-05 01.05.08 Added family code for 1068E family. + * Removed IOCFacts Reply EEDP Capability bit. * -------------------------------------------------------------------------- mpi_cnfg.h @@ -142,6 +220,166 @@ mpi_cnfg.h * Added IO Unit Page 3. * Modified defines for Scsi Port Page 2. * Modified RAID Volume Pages. + * 08-08-01 01.02.01 Original release for v1.2 work. + * Added SepID and SepBus to RVP2 IMPhysicalDisk struct. + * Added defines for the SEP bits in RVP2 VolumeSettings. + * Modified the DeviceSettings field in RVP2 to use the + * proper structure. + * Added defines for SES, SAF-TE, and cross channel for + * IOCPage2 CapabilitiesFlags. + * Removed define for MPI_IOUNITPAGE2_FLAGS_RAID_DISABLE. + * Removed define for + * MPI_SCSIPORTPAGE2_PORT_FLAGS_PARITY_ENABLE. + * Added define for MPI_CONFIG_PAGEATTR_RO_PERSISTENT. + * 08-29-01 01.02.02 Fixed value for MPI_MANUFACTPAGE_DEVID_53C1035. + * Added defines for MPI_FCPORTPAGE1_FLAGS_HARD_ALPA_ONLY + * and MPI_FCPORTPAGE1_FLAGS_IMMEDIATE_ERROR_REPLY. + * Removed MPI_SCSIPORTPAGE0_CAP_PACING_TRANSFERS, + * MPI_SCSIDEVPAGE0_NP_PACING_TRANSFERS, and + * MPI_SCSIDEVPAGE1_RP_PACING_TRANSFERS, and + * MPI_SCSIDEVPAGE1_CONF_PPR_ALLOWED. + * Added defines for MPI_SCSIDEVPAGE1_CONF_WDTR_DISALLOWED + * and MPI_SCSIDEVPAGE1_CONF_SDTR_DISALLOWED. + * Added OnBusTimerValue to CONFIG_PAGE_SCSI_PORT_1. + * Added rejected bits to SCSI Device Page 0 Information. + * Increased size of ALPA array in FC Port Page 2 by one + * and removed a one byte reserved field. + * 09-28-01 01.02.03 Swapped NegWireSpeedLow and NegWireSpeedLow in + * CONFIG_PAGE_LAN_1 to match preferred 64-bit ordering. + * Added structures for Manufacturing Page 4, IO Unit + * Page 3, IOC Page 3, IOC Page 4, RAID Volume Page 0, and + * RAID PhysDisk Page 0. + * 10-04-01 01.02.04 Added define for MPI_CONFIG_PAGETYPE_RAID_PHYSDISK. + * Modified some of the new defines to make them 32 + * character unique. + * Modified how variable length pages (arrays) are defined. + * Added generic defines for hot spare pools and RAID + * volume types. + * 11-01-01 01.02.05 Added define for MPI_IOUNITPAGE1_DISABLE_IR. + * 03-14-02 01.02.06 Added PCISlotNum field to CONFIG_PAGE_IOC_1 along with + * related define, and bumped the page version define. + * 05-31-02 01.02.07 Added a Flags field to CONFIG_PAGE_IOC_2_RAID_VOL in a + * reserved byte and added a define. + * Added define for + * MPI_RAIDVOL0_STATUS_FLAG_VOLUME_INACTIVE. + * Added new config page: CONFIG_PAGE_IOC_5. + * Added MaxAliases, MaxHardAliases, and NumCurrentAliases + * fields to CONFIG_PAGE_FC_PORT_0. + * Added AltConnector and NumRequestedAliases fields to + * CONFIG_PAGE_FC_PORT_1. + * Added new config page: CONFIG_PAGE_FC_PORT_10. + * 07-12-02 01.02.08 Added more MPI_MANUFACTPAGE_DEVID_ defines. + * Added additional MPI_SCSIDEVPAGE0_NP_ defines. + * Added more MPI_SCSIDEVPAGE1_RP_ defines. + * Added define for + * MPI_SCSIDEVPAGE1_CONF_EXTENDED_PARAMS_ENABLE. + * Added new config page: CONFIG_PAGE_SCSI_DEVICE_3. + * Modified MPI_FCPORTPAGE5_FLAGS_ defines. + * 09-16-02 01.02.09 Added MPI_SCSIDEVPAGE1_CONF_FORCE_PPR_MSG define. + * 11-15-02 01.02.10 Added ConnectedID defines for CONFIG_PAGE_SCSI_PORT_0. + * Added more Flags defines for CONFIG_PAGE_FC_PORT_1. + * Added more Flags defines for CONFIG_PAGE_FC_DEVICE_0. + * 04-01-03 01.02.11 Added RR_TOV field and additional Flags defines for + * CONFIG_PAGE_FC_PORT_1. + * Added define MPI_FCPORTPAGE5_FLAGS_DISABLE to disable + * an alias. + * Added more device id defines. + * 06-26-03 01.02.12 Added MPI_IOUNITPAGE1_IR_USE_STATIC_VOLUME_ID define. + * Added TargetConfig and IDConfig fields to + * CONFIG_PAGE_SCSI_PORT_1. + * Added more PortFlags defines for CONFIG_PAGE_SCSI_PORT_2 + * to control DV. + * Added more Flags defines for CONFIG_PAGE_FC_PORT_1. + * In CONFIG_PAGE_FC_DEVICE_0, replaced Reserved1 field + * with ADISCHardALPA. + * Added MPI_FC_DEVICE_PAGE0_PROT_FCP_RETRY define. + * 01-16-04 01.02.13 Added InitiatorDeviceTimeout and InitiatorIoPendTimeout + * fields and related defines to CONFIG_PAGE_FC_PORT_1. + * Added define for + * MPI_FCPORTPAGE1_FLAGS_SOFT_ALPA_FALLBACK. + * Added new fields to the substructures of + * CONFIG_PAGE_FC_PORT_10. + * 04-29-04 01.02.14 Added define for IDP bit for CONFIG_PAGE_SCSI_PORT_0, + * CONFIG_PAGE_SCSI_DEVICE_0, and + * CONFIG_PAGE_SCSI_DEVICE_1. Also bumped Page Version for + * these pages. + * 05-11-04 01.03.01 Added structure for CONFIG_PAGE_INBAND_0. + * 08-19-04 01.05.01 Modified MSG_CONFIG request to support extended config + * pages. + * Added a new structure for extended config page header. + * Added new extended config pages types and structures for + * SAS IO Unit, SAS Expander, SAS Device, and SAS PHY. + * Replaced a reserved byte in CONFIG_PAGE_MANUFACTURING_4 + * to add a Flags field. + * Two new Manufacturing config pages (5 and 6). + * Two new bits defined for IO Unit Page 1 Flags field. + * Modified CONFIG_PAGE_IO_UNIT_2 to add three new fields + * to specify the BIOS boot device. + * Four new Flags bits defined for IO Unit Page 2. + * Added IO Unit Page 4. + * Added EEDP Flags settings to IOC Page 1. + * Added new BIOS Page 1 config page. + * 10-05-04 01.05.02 Added define for + * MPI_IOCPAGE1_INITIATOR_CONTEXT_REPLY_DISABLE. + * Added new Flags field to CONFIG_PAGE_MANUFACTURING_5 and + * associated defines. + * Added more defines for SAS IO Unit Page 0 + * DiscoveryStatus field. + * Added define for MPI_SAS_IOUNIT0_DS_SUBTRACTIVE_LINK + * and MPI_SAS_IOUNIT0_DS_TABLE_LINK. + * Added defines for Physical Mapping Modes to SAS IO Unit + * Page 2. + * Added define for + * MPI_SAS_DEVICE0_FLAGS_PORT_SELECTOR_ATTACH. + * 10-27-04 01.05.03 Added defines for new SAS PHY page addressing mode. + * Added defines for MaxTargetSpinUp to BIOS Page 1. + * Added 5 new ControlFlags defines for SAS IO Unit + * Page 1. + * Added MaxNumPhysicalMappedIDs field to SAS IO Unit + * Page 2. + * Added AccessStatus field to SAS Device Page 0 and added + * new Flags bits for supported SATA features. + * 12-07-04 01.05.04 Added config page structures for BIOS Page 2, RAID + * Volume Page 1, and RAID Physical Disk Page 1. + * Replaced IO Unit Page 1 BootTargetID,BootBus, and + * BootAdapterNum with reserved field. + * Added DataScrubRate and ResyncRate to RAID Volume + * Page 0. + * Added MPI_SAS_IOUNIT2_FLAGS_RESERVE_ID_0_FOR_BOOT + * define. + * 12-09-04 01.05.05 Added Target Mode Large CDB Enable to FC Port Page 1 + * Flags field. + * Added Auto Port Config flag define for SAS IOUNIT + * Page 1 ControlFlags. + * Added Disabled bad Phy define to Expander Page 1 + * Discovery Info field. + * Added SAS/SATA device support to SAS IOUnit Page 1 + * ControlFlags. + * Added Unsupported device to SAS Dev Page 0 Flags field + * Added disable use SATA Hash Address for SAS IOUNIT + * page 1 in ControlFields. + * 01-15-05 01.05.06 Added defaults for data scrub rate and resync rate to + * Manufacturing Page 4. + * Added new defines for BIOS Page 1 IOCSettings field. + * Added ExtDiskIdentifier field to RAID Physical Disk + * Page 0. + * Added new defines for SAS IO Unit Page 1 ControlFlags + * and to SAS Device Page 0 Flags to control SATA devices. + * Added defines and structures for the new Log Page 0, a + * new type of configuration page. + * 02-09-05 01.05.07 Added InactiveStatus field to RAID Volume Page 0. + * Added WWID field to RAID Volume Page 1. + * Added PhysicalPort field to SAS Expander pages 0 and 1. + * 03-11-05 01.05.08 Removed the EEDP flags from IOC Page 1. + * Added Enclosure/Slot boot device format to BIOS Page 2. + * New status value for RAID Volume Page 0 VolumeStatus + * (VolumeState subfield). + * New value for RAID Physical Page 0 InactiveStatus. + * Added Inactive Volume Member flag RAID Physical Disk + * Page 0 PhysDiskStatus field. + * New physical mapping mode in SAS IO Unit Page 2. + * Added CONFIG_PAGE_SAS_ENCLOSURE_0. + * Added Slot and Enclosure fields to SAS Device Page 0. * -------------------------------------------------------------------------- mpi_init.h @@ -154,6 +392,32 @@ mpi_init.h * 02-20-01 01.01.03 Started using MPI_POINTER. * 03-27-01 01.01.04 Added structure offset comments. * 04-10-01 01.01.05 Added new MsgFlag for MSG_SCSI_TASK_MGMT. + * 08-08-01 01.02.01 Original release for v1.2 work. + * 08-29-01 01.02.02 Added MPI_SCSITASKMGMT_TASKTYPE_LOGICAL_UNIT_RESET. + * Added MPI_SCSI_STATE_QUEUE_TAG_REJECTED for + * MSG_SCSI_IO_REPLY. + * 09-28-01 01.02.03 Added structures and defines for SCSI Enclosure + * Processor messages. + * 10-04-01 01.02.04 Added defines for SEP request Action field. + * 05-31-02 01.02.05 Added MPI_SCSIIO_MSGFLGS_CMD_DETERMINES_DATA_DIR define + * for SCSI IO requests. + * 11-15-02 01.02.06 Added special extended SCSI Status defines for FCP. + * 06-26-03 01.02.07 Added MPI_SCSI_STATUS_FCPEXT_UNASSIGNED define. + * 05-11-04 01.03.01 Original release for MPI v1.3. + * 08-19-04 01.05.01 Added MsgFlags defines for EEDP to SCSI IO request. + * Added new word to MSG_SCSI_IO_REPLY to add TaskTag field + * and a reserved U16. + * Added new MSG_SCSI_IO32_REQUEST structure. + * Added a TaskType of Clear Task Set to SCSI + * Task Management request. + * 12-07-04 01.05.02 Added support for Task Management Query Task. + * 01-15-05 01.05.03 Modified SCSI Enclosure Processor Request to support + * WWID addressing. + * 03-11-05 01.05.04 Removed EEDP flags from SCSI IO Request. + * Removed SCSI IO 32 Request. + * Modified SCSI Enclosure Processor Request and Reply to + * support Enclosure/Slot addressing rather than WWID + * addressing. * -------------------------------------------------------------------------- mpi_targ.h @@ -170,6 +434,33 @@ mpi_targ.h * Added structures for MPI_TARGET_SCSI_SPI_CMD_BUFFER and * MPI_TARGET_FCP_CMD_BUFFER. * 03-27-01 01.01.04 Added structure offset comments. + * 08-08-01 01.02.01 Original release for v1.2 work. + * 09-28-01 01.02.02 Added structure for MPI_TARGET_SCSI_SPI_STATUS_IU. + * Added PriorityReason field to some replies and + * defined more PriorityReason codes. + * Added some defines for to support previous version + * of MPI. + * 10-04-01 01.02.03 Added PriorityReason to MSG_TARGET_ERROR_REPLY. + * 11-01-01 01.02.04 Added define for TARGET_STATUS_SEND_FLAGS_HIGH_PRIORITY. + * 03-14-02 01.02.05 Modified MPI_TARGET_FCP_RSP_BUFFER to get the proper + * byte ordering. + * 05-31-02 01.02.06 Modified TARGET_MODE_REPLY_ALIAS_MASK to only include + * one bit. + * Added AliasIndex field to MPI_TARGET_FCP_CMD_BUFFER. + * 09-16-02 01.02.07 Added flags for confirmed completion. + * Added PRIORITY_REASON_TARGET_BUSY. + * 11-15-02 01.02.08 Added AliasID field to MPI_TARGET_SCSI_SPI_CMD_BUFFER. + * 04-01-03 01.02.09 Added OptionalOxid field to MPI_TARGET_FCP_CMD_BUFFER. + * 05-11-04 01.03.01 Original release for MPI v1.3. + * 08-19-04 01.05.01 Added new request message structures for + * MSG_TARGET_CMD_BUF_POST_BASE_REQUEST, + * MSG_TARGET_CMD_BUF_POST_LIST_REQUEST, and + * MSG_TARGET_ASSIST_EXT_REQUEST. + * Added new structures for SAS SSP Command buffer, SSP + * Task buffer, and SSP Status IU. + * 10-05-04 01.05.02 MSG_TARGET_CMD_BUFFER_POST_BASE_LIST_REPLY added. + * 02-22-05 01.05.03 Changed a comment. + * 03-11-05 01.05.04 Removed TargetAssistExtended Request. * -------------------------------------------------------------------------- mpi_fc.h @@ -192,6 +483,13 @@ mpi_fc.h * Added MPI_FC_PRIM_SEND_FLAGS_RESET_LINK define. * Added structure offset comments. * 04-09-01 01.01.07 Added RspLength field to MSG_LINK_SERVICE_RSP_REQUEST. + * 08-08-01 01.02.01 Original release for v1.2 work. + * 09-28-01 01.02.02 Change name of reserved field in + * MSG_LINK_SERVICE_RSP_REPLY. + * 05-31-02 01.02.03 Adding AliasIndex to FC Direct Access requests. + * 01-16-04 01.02.04 Added define for MPI_FC_PRIM_SEND_FLAGS_ML_RESET_LINK. + * 05-11-04 01.03.01 Original release for MPI v1.3. + * 08-19-04 01.05.01 Original release for MPI v1.5. * -------------------------------------------------------------------------- mpi_lan.h @@ -209,11 +507,56 @@ mpi_lan.h * 11-02-00 01.01.01 Original release for post 1.0 work * 02-20-01 01.01.02 Started using MPI_POINTER. * 03-27-01 01.01.03 Added structure offset comments. + * 08-08-01 01.02.01 Original release for v1.2 work. + * 05-11-04 01.03.01 Original release for MPI v1.3. + * 08-19-04 01.05.01 Original release for MPI v1.5. * -------------------------------------------------------------------------- mpi_raid.h * 02-27-01 01.01.01 Original release for this file. * 03-27-01 01.01.02 Added structure offset comments. + * 08-08-01 01.02.01 Original release for v1.2 work. + * 08-29-01 01.02.02 Added DIAG_DATA_UPLOAD_HEADER and related defines. + * 09-28-01 01.02.02 Major rework for MPI v1.2 Integrated RAID changes. + * 10-04-01 01.02.03 Added ActionData defines for + * MPI_RAID_ACTION_DELETE_VOLUME action. + * 11-01-01 01.02.04 Added define for MPI_RAID_ACTION_ADATA_DO_NOT_SYNC. + * 03-14-02 01.02.05 Added define for MPI_RAID_ACTION_ADATA_LOW_LEVEL_INIT. + * 05-07-02 01.02.06 Added define for MPI_RAID_ACTION_ACTIVATE_VOLUME, + * MPI_RAID_ACTION_INACTIVATE_VOLUME, and + * MPI_RAID_ACTION_ADATA_INACTIVATE_ALL. + * 07-12-02 01.02.07 Added structures for Mailbox request and reply. + * 11-15-02 01.02.08 Added missing MsgContext field to MSG_MAILBOX_REQUEST. + * 04-01-03 01.02.09 New action data option flag for + * MPI_RAID_ACTION_DELETE_VOLUME. + * 05-11-04 01.03.01 Original release for MPI v1.3. + * 08-19-04 01.05.01 Original release for MPI v1.5. + * 01-15-05 01.05.02 Added defines for the two new RAID Actions for + * _SET_RESYNC_RATE and _SET_DATA_SCRUB_RATE. + * -------------------------------------------------------------------------- + +mpi_tool.h + * 08-08-01 01.02.01 Original release. + * 08-29-01 01.02.02 Added DIAG_DATA_UPLOAD_HEADER and related defines. + * 01-16-04 01.02.03 Added defines and structures for new tools + *. MPI_TOOLBOX_ISTWI_READ_WRITE_TOOL and + * MPI_TOOLBOX_FC_MANAGEMENT_TOOL. + * 04-29-04 01.02.04 Added message structures for Diagnostic Buffer Post and + * Diagnostic Release requests and replies. + * 05-11-04 01.03.01 Original release for MPI v1.3. + * 08-19-04 01.05.01 Original release for MPI v1.5. + * 10-06-04 01.05.02 Added define for MPI_DIAG_BUF_TYPE_COUNT. + * 02-09-05 01.05.03 Added frame size option to FC management tool. + * Added Beacon tool to the Toolbox. + * -------------------------------------------------------------------------- + +mpi_inb.h + * 05-11-04 01.03.01 Original release. + * 08-19-04 01.05.01 Original release for MPI v1.5. + * -------------------------------------------------------------------------- + +mpi_sas.h + * 08-19-04 01.05.01 Original release. * -------------------------------------------------------------------------- mpi_type.h @@ -221,21 +564,83 @@ mpi_type.h * 06-06-00 01.00.01 Update version number for 1.0 release. * 11-02-00 01.01.01 Original release for post 1.0 work * 02-20-01 01.01.02 Added define and ifdef for MPI_POINTER. + * 08-08-01 01.02.01 Original release for v1.2 work. + * 05-11-04 01.03.01 Original release for MPI v1.3. + * 08-19-04 01.05.01 Original release for MPI v1.5. * -------------------------------------------------------------------------- mpi_history.txt Parts list history -Filename 01.01.10 +Filename 01.05.09 ---------- -------- -mpi.h 01.01.07 -mpi_ioc.h 01.01.07 -mpi_cnfg.h 01.01.11 -mpi_init.h 01.01.05 -mpi_targ.h 01.01.04 -mpi_fc.h 01.01.07 -mpi_lan.h 01.01.03 -mpi_raid.h 01.01.02 -mpi_type.h 01.01.02 +mpi.h 01.05.07 +mpi_ioc.h 01.05.08 +mpi_cnfg.h 01.05.08 +mpi_init.h 01.05.04 +mpi_targ.h 01.05.04 +mpi_fc.h 01.05.01 +mpi_lan.h 01.05.01 +mpi_raid.h 01.05.02 +mpi_tool.h 01.05.03 +mpi_inb.h 01.05.01 +mpi_sas.h 01.05.01 +mpi_type.h 01.05.01 + +Filename 01.05.08 01.05.07 01.05.06 01.05.05 01.05.04 01.05.03 +---------- -------- -------- -------- -------- -------- -------- +mpi.h 01.05.06 01.05.05 01.05.04 01.05.03 01.05.02 01.05.01 +mpi_ioc.h 01.05.07 01.05.06 01.05.05 01.05.04 01.05.03 01.05.02 +mpi_cnfg.h 01.05.07 01.05.07 01.05.06 01.05.05 01.05.04 01.05.03 +mpi_init.h 01.05.03 01.05.03 01.05.03 01.05.02 01.05.02 01.05.01 +mpi_targ.h 01.05.03 01.05.02 01.05.02 01.05.02 01.05.02 01.05.02 +mpi_fc.h 01.05.01 01.05.01 01.05.01 01.05.01 01.05.01 01.05.01 +mpi_lan.h 01.05.01 01.05.01 01.05.01 01.05.01 01.05.01 01.05.01 +mpi_raid.h 01.05.02 01.05.02 01.05.02 01.05.01 01.05.01 01.05.01 +mpi_tool.h 01.05.03 01.05.03 01.05.02 01.05.02 01.05.02 01.05.02 +mpi_inb.h 01.05.01 01.05.01 01.05.01 01.05.01 01.05.01 01.05.01 +mpi_sas.h 01.05.01 01.05.01 01.05.01 01.05.01 01.05.01 01.05.01 +mpi_type.h 01.05.01 01.05.01 01.05.01 01.05.01 01.05.01 01.05.01 + +Filename 01.05.02 01.05.01 01.03.01 01.02.14 01.02.13 01.02.12 +---------- -------- -------- -------- -------- -------- -------- +mpi.h 01.05.01 01.05.01 01.03.01 01.02.12 01.02.11 01.02.10 +mpi_ioc.h 01.05.02 01.05.01 01.03.01 01.02.09 01.02.08 01.02.08 +mpi_cnfg.h 01.05.02 01.05.01 01.03.01 01.02.14 01.02.13 01.02.12 +mpi_init.h 01.05.01 01.05.01 01.03.01 01.02.07 01.02.07 01.02.07 +mpi_targ.h 01.05.02 01.05.01 01.03.01 01.02.09 01.02.09 01.02.09 +mpi_fc.h 01.05.01 01.05.01 01.03.01 01.02.04 01.02.04 01.02.03 +mpi_lan.h 01.05.01 01.05.01 01.03.01 01.02.01 01.02.01 01.02.01 +mpi_raid.h 01.05.01 01.05.01 01.03.01 01.02.09 01.02.09 01.02.09 +mpi_tool.h 01.05.02 01.05.01 01.03.01 01.02.01 01.02.01 01.02.01 +mpi_inb.h 01.05.01 01.05.01 01.03.01 +mpi_sas.h 01.05.01 01.05.01 +mpi_type.h 01.05.01 01.05.01 01.03.01 01.02.04 01.02.03 01.02.02 + +Filename 01.02.11 01.02.10 01.02.09 01.02.08 01.02.07 01.02.06 +---------- -------- -------- -------- -------- -------- -------- +mpi.h 01.02.09 01.02.08 01.02.07 01.02.06 01.02.05 01.02.04 +mpi_ioc.h 01.02.07 01.02.06 01.02.06 01.02.06 01.02.06 01.02.05 +mpi_cnfg.h 01.02.11 01.02.10 01.02.09 01.02.08 01.02.07 01.02.06 +mpi_init.h 01.02.06 01.02.06 01.02.05 01.02.05 01.02.05 01.02.04 +mpi_targ.h 01.02.09 01.02.08 01.02.07 01.02.06 01.02.06 01.02.05 +mpi_fc.h 01.02.03 01.02.03 01.02.03 01.02.03 01.02.03 01.02.02 +mpi_lan.h 01.02.01 01.02.01 01.02.01 01.02.01 01.02.01 01.02.01 +mpi_raid.h 01.02.09 01.02.08 01.02.07 01.02.07 01.02.06 01.02.05 +mpi_tool.h 01.02.01 01.02.01 01.02.01 01.02.01 01.02.01 01.02.01 +mpi_type.h 01.02.02 01.02.02 01.02.02 01.02.02 01.02.02 01.02.02 + +Filename 01.02.05 01.02.04 01.02.03 01.02.02 01.02.01 01.01.10 +---------- -------- -------- -------- -------- -------- -------- +mpi.h 01.02.03 01.02.02 01.02.02 01.02.01 01.02.01 01.01.07 +mpi_ioc.h 01.02.04 01.02.03 01.02.03 01.02.02 01.02.01 01.01.07 +mpi_cnfg.h 01.02.05 01.02.04 01.02.03 01.02.02 01.02.01 01.01.11 +mpi_init.h 01.02.04 01.02.04 01.02.03 01.02.02 01.02.01 01.01.05 +mpi_targ.h 01.02.04 01.02.03 01.02.02 01.02.01 01.02.01 01.01.04 +mpi_fc.h 01.02.02 01.02.02 01.02.02 01.02.01 01.02.01 01.01.07 +mpi_lan.h 01.02.01 01.02.01 01.02.01 01.02.01 01.02.01 01.01.03 +mpi_raid.h 01.02.04 01.02.03 01.02.02 01.02.01 01.02.01 01.01.02 +mpi_tool.h 01.02.02 01.02.02 01.02.02 01.02.02 01.02.01 +mpi_type.h 01.02.02 01.02.02 01.02.02 01.02.02 01.02.01 01.01.02 Filename 01.01.09 01.01.08 01.01.07 01.01.06 01.01.05 01.01.04 ---------- -------- -------- -------- -------- -------- -------- diff --git a/drivers/message/fusion/lsi/mpi_inb.h b/drivers/message/fusion/lsi/mpi_inb.h index dae29fbed56..ff167309ba2 100644 --- a/drivers/message/fusion/lsi/mpi_inb.h +++ b/drivers/message/fusion/lsi/mpi_inb.h @@ -1,19 +1,20 @@ /* - * Copyright (c) 2003 LSI Logic Corporation. + * Copyright (c) 2003-2004 LSI Logic Corporation. * * * Name: mpi_inb.h * Title: MPI Inband structures and definitions * Creation Date: September 30, 2003 * - * mpi_inb.h Version: 01.03.xx + * mpi_inb.h Version: 01.05.01 * * Version History * --------------- * * Date Version Description * -------- -------- ------------------------------------------------------ - * ??-??-?? 01.03.01 Original release. + * 05-11-04 01.03.01 Original release. + * 08-19-04 01.05.01 Original release for MPI v1.5. * -------------------------------------------------------------------------- */ diff --git a/drivers/message/fusion/lsi/mpi_init.h b/drivers/message/fusion/lsi/mpi_init.h index b3c95fd7256..aca035801a8 100644 --- a/drivers/message/fusion/lsi/mpi_init.h +++ b/drivers/message/fusion/lsi/mpi_init.h @@ -1,12 +1,12 @@ /* - * Copyright (c) 2000-2003 LSI Logic Corporation. + * Copyright (c) 2000-2005 LSI Logic Corporation. * * * Name: mpi_init.h * Title: MPI initiator mode messages and structures * Creation Date: June 8, 2000 * - * mpi_init.h Version: 01.05.xx + * mpi_init.h Version: 01.05.04 * * Version History * --------------- @@ -33,6 +33,21 @@ * for SCSI IO requests. * 11-15-02 01.02.06 Added special extended SCSI Status defines for FCP. * 06-26-03 01.02.07 Added MPI_SCSI_STATUS_FCPEXT_UNASSIGNED define. + * 05-11-04 01.03.01 Original release for MPI v1.3. + * 08-19-04 01.05.01 Added MsgFlags defines for EEDP to SCSI IO request. + * Added new word to MSG_SCSI_IO_REPLY to add TaskTag field + * and a reserved U16. + * Added new MSG_SCSI_IO32_REQUEST structure. + * Added a TaskType of Clear Task Set to SCSI + * Task Management request. + * 12-07-04 01.05.02 Added support for Task Management Query Task. + * 01-15-05 01.05.03 Modified SCSI Enclosure Processor Request to support + * WWID addressing. + * 03-11-05 01.05.04 Removed EEDP flags from SCSI IO Request. + * Removed SCSI IO 32 Request. + * Modified SCSI Enclosure Processor Request and Reply to + * support Enclosure/Slot addressing rather than WWID + * addressing. * -------------------------------------------------------------------------- */ @@ -76,20 +91,12 @@ typedef struct _MSG_SCSI_IO_REQUEST #define MPI_SCSIIO_MSGFLGS_SENSE_WIDTH (0x01) #define MPI_SCSIIO_MSGFLGS_SENSE_WIDTH_32 (0x00) #define MPI_SCSIIO_MSGFLGS_SENSE_WIDTH_64 (0x01) + #define MPI_SCSIIO_MSGFLGS_SENSE_LOCATION (0x02) #define MPI_SCSIIO_MSGFLGS_SENSE_LOC_HOST (0x00) #define MPI_SCSIIO_MSGFLGS_SENSE_LOC_IOC (0x02) -#define MPI_SCSIIO_MSGFLGS_CMD_DETERMINES_DATA_DIR (0x04) -#define MPI_SCSIIO_MSGFLGS_EEDP_TYPE_MASK (0xE0) -#define MPI_SCSIIO_MSGFLGS_EEDP_NONE (0x00) -#define MPI_SCSIIO_MSGFLGS_EEDP_RDPROTECT_T10 (0x20) -#define MPI_SCSIIO_MSGFLGS_EEDP_VRPROTECT_T10 (0x40) -#define MPI_SCSIIO_MSGFLGS_EEDP_WRPROTECT_T10 (0x60) -#define MPI_SCSIIO_MSGFLGS_EEDP_520_READ_MODE1 (0x20) -#define MPI_SCSIIO_MSGFLGS_EEDP_520_WRITE_MODE1 (0x40) -#define MPI_SCSIIO_MSGFLGS_EEDP_8_9_READ_MODE1 (0x60) -#define MPI_SCSIIO_MSGFLGS_EEDP_8_9_WRITE_MODE1 (0x80) +#define MPI_SCSIIO_MSGFLGS_CMD_DETERMINES_DATA_DIR (0x04) /* SCSI IO LUN fields */ @@ -148,6 +155,8 @@ typedef struct _MSG_SCSI_IO_REPLY U32 TransferCount; /* 14h */ U32 SenseCount; /* 18h */ U32 ResponseInfo; /* 1Ch */ + U16 TaskTag; /* 20h */ + U16 Reserved1; /* 22h */ } MSG_SCSI_IO_REPLY, MPI_POINTER PTR_MSG_SCSI_IO_REPLY, SCSIIOReply_t, MPI_POINTER pSCSIIOReply_t; @@ -190,32 +199,7 @@ typedef struct _MSG_SCSI_IO_REPLY #define MPI_SCSI_RSP_INFO_TASK_MGMT_FAILED (0x05000000) #define MPI_SCSI_RSP_INFO_SPI_LQ_INVALID_TYPE (0x06000000) - -/****************************************************************************/ -/* SCSI IO 32 Request message structure */ -/****************************************************************************/ - -typedef struct _MSG_SCSI_IO32_REQUEST -{ - U8 TargetID; /* 00h */ - U8 Bus; /* 01h */ - U8 ChainOffset; /* 02h */ - U8 Function; /* 03h */ - U8 CDBLength; /* 04h */ - U8 SenseBufferLength; /* 05h */ - U8 Reserved; /* 06h */ - U8 MsgFlags; /* 07h */ - U32 MsgContext; /* 08h */ - U8 LUN[8]; /* 0Ch */ - U32 Control; /* 14h */ - U8 CDB[32]; /* 18h */ - U32 DataLength; /* 38h */ - U32 SenseBufferLowAddr; /* 3Ch */ - SGE_IO_UNION SGL; /* 40h */ -} MSG_SCSI_IO32_REQUEST, MPI_POINTER PTR_MSG_SCSI_IO32_REQUEST, - SCSIIO32Request_t, MPI_POINTER pSCSIIO32Request_t; - -/* SCSI IO 32 uses the same defines as above for SCSI IO */ +#define MPI_SCSI_TASKTAG_UNKNOWN (0xFFFF) /****************************************************************************/ @@ -247,6 +231,7 @@ typedef struct _MSG_SCSI_TASK_MGMT #define MPI_SCSITASKMGMT_TASKTYPE_RESET_BUS (0x04) #define MPI_SCSITASKMGMT_TASKTYPE_LOGICAL_UNIT_RESET (0x05) #define MPI_SCSITASKMGMT_TASKTYPE_CLEAR_TASK_SET (0x06) +#define MPI_SCSITASKMGMT_TASKTYPE_QUERY_TASK (0x07) /* MsgFlags bits */ #define MPI_SCSITASKMGMT_MSGFLAGS_TARGET_RESET_OPTION (0x00) @@ -260,7 +245,7 @@ typedef struct _MSG_SCSI_TASK_MGMT_REPLY U8 Bus; /* 01h */ U8 MsgLength; /* 02h */ U8 Function; /* 03h */ - U8 Reserved; /* 04h */ + U8 ResponseCode; /* 04h */ U8 TaskType; /* 05h */ U8 Reserved1; /* 06h */ U8 MsgFlags; /* 07h */ @@ -272,6 +257,15 @@ typedef struct _MSG_SCSI_TASK_MGMT_REPLY } MSG_SCSI_TASK_MGMT_REPLY, MPI_POINTER PTR_MSG_SCSI_TASK_MGMT_REPLY, SCSITaskMgmtReply_t, MPI_POINTER pSCSITaskMgmtReply_t; +/* ResponseCode values */ +#define MPI_SCSITASKMGMT_RSP_TM_COMPLETE (0x00) +#define MPI_SCSITASKMGMT_RSP_INVALID_FRAME (0x02) +#define MPI_SCSITASKMGMT_RSP_TM_NOT_SUPPORTED (0x04) +#define MPI_SCSITASKMGMT_RSP_TM_FAILED (0x05) +#define MPI_SCSITASKMGMT_RSP_TM_SUCCEEDED (0x08) +#define MPI_SCSITASKMGMT_RSP_TM_INVALID_LUN (0x09) +#define MPI_SCSITASKMGMT_RSP_IO_QUEUED_ON_IOC (0x80) + /****************************************************************************/ /* SCSI Enclosure Processor messages */ @@ -284,11 +278,16 @@ typedef struct _MSG_SEP_REQUEST U8 ChainOffset; /* 02h */ U8 Function; /* 03h */ U8 Action; /* 04h */ - U8 Reserved1; /* 05h */ - U8 Reserved2; /* 06h */ + U8 Flags; /* 05h */ + U8 Reserved1; /* 06h */ U8 MsgFlags; /* 07h */ U32 MsgContext; /* 08h */ U32 SlotStatus; /* 0Ch */ + U32 Reserved2; /* 10h */ + U32 Reserved3; /* 14h */ + U32 Reserved4; /* 18h */ + U16 Slot; /* 1Ch */ + U16 EnclosureHandle; /* 1Eh */ } MSG_SEP_REQUEST, MPI_POINTER PTR_MSG_SEP_REQUEST, SEPRequest_t, MPI_POINTER pSEPRequest_t; @@ -296,6 +295,10 @@ typedef struct _MSG_SEP_REQUEST #define MPI_SEP_REQ_ACTION_WRITE_STATUS (0x00) #define MPI_SEP_REQ_ACTION_READ_STATUS (0x01) +/* Flags defines */ +#define MPI_SEP_REQ_FLAGS_ENCLOSURE_SLOT_ADDRESS (0x01) +#define MPI_SEP_REQ_FLAGS_BUS_TARGETID_ADDRESS (0x00) + /* SlotStatus bits for MSG_SEP_REQUEST */ #define MPI_SEP_REQ_SLOTSTATUS_NO_ERROR (0x00000001) #define MPI_SEP_REQ_SLOTSTATUS_DEV_FAULTY (0x00000002) @@ -332,6 +335,9 @@ typedef struct _MSG_SEP_REPLY U16 IOCStatus; /* 0Eh */ U32 IOCLogInfo; /* 10h */ U32 SlotStatus; /* 14h */ + U32 Reserved4; /* 18h */ + U16 Slot; /* 1Ch */ + U16 EnclosureHandle; /* 1Eh */ } MSG_SEP_REPLY, MPI_POINTER PTR_MSG_SEP_REPLY, SEPReply_t, MPI_POINTER pSEPReply_t; diff --git a/drivers/message/fusion/lsi/mpi_ioc.h b/drivers/message/fusion/lsi/mpi_ioc.h index 82445d18b4d..f91eb4efe8c 100644 --- a/drivers/message/fusion/lsi/mpi_ioc.h +++ b/drivers/message/fusion/lsi/mpi_ioc.h @@ -1,12 +1,12 @@ /* - * Copyright (c) 2000-2003 LSI Logic Corporation. + * Copyright (c) 2000-2005 LSI Logic Corporation. * * * Name: mpi_ioc.h * Title: MPI IOC, Port, Event, FW Download, and FW Upload messages * Creation Date: August 11, 2000 * - * mpi_ioc.h Version: 01.05.xx + * mpi_ioc.h Version: 01.05.08 * * Version History * --------------- @@ -57,6 +57,30 @@ * Added AliasIndex to EVENT_DATA_LOGOUT structure. * 04-01-03 01.02.07 Added defines for MPI_FW_HEADER_SIGNATURE_. * 06-26-03 01.02.08 Added new values to the product family defines. + * 04-29-04 01.02.09 Added IOCCapabilities field to MSG_IOC_FACTS_REPLY and + * added related defines. + * 05-11-04 01.03.01 Original release for MPI v1.3. + * 08-19-04 01.05.01 Added four new fields to MSG_IOC_INIT. + * Added three new fields to MSG_IOC_FACTS_REPLY. + * Defined four new bits for the IOCCapabilities field of + * the IOCFacts reply. + * Added two new PortTypes for the PortFacts reply. + * Added six new events along with their EventData + * structures. + * Added a new MsgFlag to the FwDownload request to + * indicate last segment. + * Defined a new image type of boot loader. + * Added FW family codes for SAS product families. + * 10-05-04 01.05.02 Added ReplyFifoHostSignalingAddr field to + * MSG_IOC_FACTS_REPLY. + * 12-07-04 01.05.03 Added more defines for SAS Discovery Error event. + * 12-09-04 01.05.04 Added Unsupported device to SAS Device event. + * 01-15-05 01.05.05 Added event data for SAS SES Event. + * 02-09-05 01.05.06 Added MPI_FW_UPLOAD_ITYPE_FW_BACKUP define. + * 02-22-05 01.05.07 Added Host Page Buffer Persistent flag to IOC Facts + * Reply and IOC Init Request. + * 03-11-05 01.05.08 Added family code for 1068E family. + * Removed IOCFacts Reply EEDP Capability bit. * -------------------------------------------------------------------------- */ @@ -90,20 +114,37 @@ typedef struct _MSG_IOC_INIT U32 HostMfaHighAddr; /* 10h */ U32 SenseBufferHighAddr; /* 14h */ U32 ReplyFifoHostSignalingAddr; /* 18h */ + SGE_SIMPLE_UNION HostPageBufferSGE; /* 1Ch */ + U16 MsgVersion; /* 28h */ + U16 HeaderVersion; /* 2Ah */ } MSG_IOC_INIT, MPI_POINTER PTR_MSG_IOC_INIT, IOCInit_t, MPI_POINTER pIOCInit_t; /* WhoInit values */ -#define MPI_WHOINIT_NO_ONE (0x00) -#define MPI_WHOINIT_SYSTEM_BIOS (0x01) -#define MPI_WHOINIT_ROM_BIOS (0x02) -#define MPI_WHOINIT_PCI_PEER (0x03) -#define MPI_WHOINIT_HOST_DRIVER (0x04) -#define MPI_WHOINIT_MANUFACTURER (0x05) +#define MPI_WHOINIT_NO_ONE (0x00) +#define MPI_WHOINIT_SYSTEM_BIOS (0x01) +#define MPI_WHOINIT_ROM_BIOS (0x02) +#define MPI_WHOINIT_PCI_PEER (0x03) +#define MPI_WHOINIT_HOST_DRIVER (0x04) +#define MPI_WHOINIT_MANUFACTURER (0x05) /* Flags values */ -#define MPI_IOCINIT_FLAGS_DISCARD_FW_IMAGE (0x01) -#define MPI_IOCINIT_FLAGS_REPLY_FIFO_HOST_SIGNAL (0x02) +#define MPI_IOCINIT_FLAGS_HOST_PAGE_BUFFER_PERSISTENT (0x04) +#define MPI_IOCINIT_FLAGS_REPLY_FIFO_HOST_SIGNAL (0x02) +#define MPI_IOCINIT_FLAGS_DISCARD_FW_IMAGE (0x01) + +/* MsgVersion */ +#define MPI_IOCINIT_MSGVERSION_MAJOR_MASK (0xFF00) +#define MPI_IOCINIT_MSGVERSION_MAJOR_SHIFT (8) +#define MPI_IOCINIT_MSGVERSION_MINOR_MASK (0x00FF) +#define MPI_IOCINIT_MSGVERSION_MINOR_SHIFT (0) + +/* HeaderVersion */ +#define MPI_IOCINIT_HEADERVERSION_UNIT_MASK (0xFF00) +#define MPI_IOCINIT_HEADERVERSION_UNIT_SHIFT (8) +#define MPI_IOCINIT_HEADERVERSION_DEV_MASK (0x00FF) +#define MPI_IOCINIT_HEADERVERSION_DEV_SHIFT (0) + typedef struct _MSG_IOC_INIT_REPLY { @@ -187,32 +228,39 @@ typedef struct _MSG_IOC_FACTS_REPLY MPI_FW_VERSION FWVersion; /* 38h */ U16 HighPriorityQueueDepth; /* 3Ch */ U16 Reserved2; /* 3Eh */ + SGE_SIMPLE_UNION HostPageBufferSGE; /* 40h */ + U32 ReplyFifoHostSignalingAddr; /* 4Ch */ } MSG_IOC_FACTS_REPLY, MPI_POINTER PTR_MSG_IOC_FACTS_REPLY, IOCFactsReply_t, MPI_POINTER pIOCFactsReply_t; -#define MPI_IOCFACTS_MSGVERSION_MAJOR_MASK (0xFF00) -#define MPI_IOCFACTS_MSGVERSION_MINOR_MASK (0x00FF) +#define MPI_IOCFACTS_MSGVERSION_MAJOR_MASK (0xFF00) +#define MPI_IOCFACTS_MSGVERSION_MAJOR_SHIFT (8) +#define MPI_IOCFACTS_MSGVERSION_MINOR_MASK (0x00FF) +#define MPI_IOCFACTS_MSGVERSION_MINOR_SHIFT (0) -#define MPI_IOCFACTS_HEADERVERSION_UNIT_MASK (0xFF00) -#define MPI_IOCFACTS_HEADERVERSION_DEV_MASK (0x00FF) +#define MPI_IOCFACTS_HDRVERSION_UNIT_MASK (0xFF00) +#define MPI_IOCFACTS_HDRVERSION_UNIT_SHIFT (8) +#define MPI_IOCFACTS_HDRVERSION_DEV_MASK (0x00FF) +#define MPI_IOCFACTS_HDRVERSION_DEV_SHIFT (0) -#define MPI_IOCFACTS_EXCEPT_CONFIG_CHECKSUM_FAIL (0x0001) -#define MPI_IOCFACTS_EXCEPT_RAID_CONFIG_INVALID (0x0002) -#define MPI_IOCFACTS_EXCEPT_FW_CHECKSUM_FAIL (0x0004) -#define MPI_IOCFACTS_EXCEPT_PERSISTENT_TABLE_FULL (0x0008) +#define MPI_IOCFACTS_EXCEPT_CONFIG_CHECKSUM_FAIL (0x0001) +#define MPI_IOCFACTS_EXCEPT_RAID_CONFIG_INVALID (0x0002) +#define MPI_IOCFACTS_EXCEPT_FW_CHECKSUM_FAIL (0x0004) +#define MPI_IOCFACTS_EXCEPT_PERSISTENT_TABLE_FULL (0x0008) -#define MPI_IOCFACTS_FLAGS_FW_DOWNLOAD_BOOT (0x01) +#define MPI_IOCFACTS_FLAGS_FW_DOWNLOAD_BOOT (0x01) +#define MPI_IOCFACTS_FLAGS_REPLY_FIFO_HOST_SIGNAL (0x02) +#define MPI_IOCFACTS_FLAGS_HOST_PAGE_BUFFER_PERSISTENT (0x04) -#define MPI_IOCFACTS_EVENTSTATE_DISABLED (0x00) -#define MPI_IOCFACTS_EVENTSTATE_ENABLED (0x01) +#define MPI_IOCFACTS_EVENTSTATE_DISABLED (0x00) +#define MPI_IOCFACTS_EVENTSTATE_ENABLED (0x01) -#define MPI_IOCFACTS_CAPABILITY_HIGH_PRI_Q (0x00000001) -#define MPI_IOCFACTS_CAPABILITY_REPLY_HOST_SIGNAL (0x00000002) -#define MPI_IOCFACTS_CAPABILITY_QUEUE_FULL_HANDLING (0x00000004) -#define MPI_IOCFACTS_CAPABILITY_DIAG_TRACE_BUFFER (0x00000008) -#define MPI_IOCFACTS_CAPABILITY_SNAPSHOT_BUFFER (0x00000010) -#define MPI_IOCFACTS_CAPABILITY_EXTENDED_BUFFER (0x00000020) -#define MPI_IOCFACTS_CAPABILITY_EEDP (0x00000040) +#define MPI_IOCFACTS_CAPABILITY_HIGH_PRI_Q (0x00000001) +#define MPI_IOCFACTS_CAPABILITY_REPLY_HOST_SIGNAL (0x00000002) +#define MPI_IOCFACTS_CAPABILITY_QUEUE_FULL_HANDLING (0x00000004) +#define MPI_IOCFACTS_CAPABILITY_DIAG_TRACE_BUFFER (0x00000008) +#define MPI_IOCFACTS_CAPABILITY_SNAPSHOT_BUFFER (0x00000010) +#define MPI_IOCFACTS_CAPABILITY_EXTENDED_BUFFER (0x00000020) @@ -408,6 +456,8 @@ typedef struct _MSG_EVENT_ACK_REPLY #define MPI_EVENT_SAS_DEVICE_STATUS_CHANGE (0x0000000F) #define MPI_EVENT_SAS_SES (0x00000010) #define MPI_EVENT_PERSISTENT_TABLE_FULL (0x00000011) +#define MPI_EVENT_SAS_PHY_LINK_STATUS (0x00000012) +#define MPI_EVENT_SAS_DISCOVERY_ERROR (0x00000013) /* AckRequired field values */ @@ -467,6 +517,10 @@ typedef struct _EVENT_DATA_SAS_DEVICE_STATUS_CHANGE U8 ASCQ; /* 05h */ U16 DevHandle; /* 06h */ U32 DeviceInfo; /* 08h */ + U16 ParentDevHandle; /* 0Ch */ + U8 PhyNum; /* 0Eh */ + U8 Reserved1; /* 0Fh */ + U64 SASAddress; /* 10h */ } EVENT_DATA_SAS_DEVICE_STATUS_CHANGE, MPI_POINTER PTR_EVENT_DATA_SAS_DEVICE_STATUS_CHANGE, MpiEventDataSasDeviceStatusChange_t, @@ -477,6 +531,8 @@ typedef struct _EVENT_DATA_SAS_DEVICE_STATUS_CHANGE #define MPI_EVENT_SAS_DEV_STAT_RC_NOT_RESPONDING (0x04) #define MPI_EVENT_SAS_DEV_STAT_RC_SMART_DATA (0x05) #define MPI_EVENT_SAS_DEV_STAT_RC_NO_PERSIST_ADDED (0x06) +#define MPI_EVENT_SAS_DEV_STAT_RC_UNSUPPORTED (0x07) + /* SCSI Event data for Queue Full event */ @@ -488,6 +544,35 @@ typedef struct _EVENT_DATA_QUEUE_FULL } EVENT_DATA_QUEUE_FULL, MPI_POINTER PTR_EVENT_DATA_QUEUE_FULL, EventDataQueueFull_t, MPI_POINTER pEventDataQueueFull_t; +/* MPI Integrated RAID Event data */ + +typedef struct _EVENT_DATA_RAID +{ + U8 VolumeID; /* 00h */ + U8 VolumeBus; /* 01h */ + U8 ReasonCode; /* 02h */ + U8 PhysDiskNum; /* 03h */ + U8 ASC; /* 04h */ + U8 ASCQ; /* 05h */ + U16 Reserved; /* 06h */ + U32 SettingsStatus; /* 08h */ +} EVENT_DATA_RAID, MPI_POINTER PTR_EVENT_DATA_RAID, + MpiEventDataRaid_t, MPI_POINTER pMpiEventDataRaid_t; + +/* MPI Integrated RAID Event data ReasonCode values */ +#define MPI_EVENT_RAID_RC_VOLUME_CREATED (0x00) +#define MPI_EVENT_RAID_RC_VOLUME_DELETED (0x01) +#define MPI_EVENT_RAID_RC_VOLUME_SETTINGS_CHANGED (0x02) +#define MPI_EVENT_RAID_RC_VOLUME_STATUS_CHANGED (0x03) +#define MPI_EVENT_RAID_RC_VOLUME_PHYSDISK_CHANGED (0x04) +#define MPI_EVENT_RAID_RC_PHYSDISK_CREATED (0x05) +#define MPI_EVENT_RAID_RC_PHYSDISK_DELETED (0x06) +#define MPI_EVENT_RAID_RC_PHYSDISK_SETTINGS_CHANGED (0x07) +#define MPI_EVENT_RAID_RC_PHYSDISK_STATUS_CHANGED (0x08) +#define MPI_EVENT_RAID_RC_DOMAIN_VAL_NEEDED (0x09) +#define MPI_EVENT_RAID_RC_SMART_DATA (0x0A) +#define MPI_EVENT_RAID_RC_REPLACE_ACTION_STARTED (0x0B) + /* MPI Link Status Change Event data */ typedef struct _EVENT_DATA_LINK_STATUS @@ -535,35 +620,63 @@ typedef struct _EVENT_DATA_LOGOUT #define MPI_EVENT_LOGOUT_ALL_ALIASES (0xFF) +/* SAS SES Event data */ -/* MPI Integrated RAID Event data */ - -typedef struct _EVENT_DATA_RAID +typedef struct _EVENT_DATA_SAS_SES { - U8 VolumeID; /* 00h */ - U8 VolumeBus; /* 01h */ - U8 ReasonCode; /* 02h */ - U8 PhysDiskNum; /* 03h */ - U8 ASC; /* 04h */ - U8 ASCQ; /* 05h */ - U16 Reserved; /* 06h */ - U32 SettingsStatus; /* 08h */ -} EVENT_DATA_RAID, MPI_POINTER PTR_EVENT_DATA_RAID, - MpiEventDataRaid_t, MPI_POINTER pMpiEventDataRaid_t; + U8 PhyNum; /* 00h */ + U8 Port; /* 01h */ + U8 PortWidth; /* 02h */ + U8 Reserved1; /* 04h */ +} EVENT_DATA_SAS_SES, MPI_POINTER PTR_EVENT_DATA_SAS_SES, + MpiEventDataSasSes_t, MPI_POINTER pMpiEventDataSasSes_t; -/* MPI Integrated RAID Event data ReasonCode values */ -#define MPI_EVENT_RAID_RC_VOLUME_CREATED (0x00) -#define MPI_EVENT_RAID_RC_VOLUME_DELETED (0x01) -#define MPI_EVENT_RAID_RC_VOLUME_SETTINGS_CHANGED (0x02) -#define MPI_EVENT_RAID_RC_VOLUME_STATUS_CHANGED (0x03) -#define MPI_EVENT_RAID_RC_VOLUME_PHYSDISK_CHANGED (0x04) -#define MPI_EVENT_RAID_RC_PHYSDISK_CREATED (0x05) -#define MPI_EVENT_RAID_RC_PHYSDISK_DELETED (0x06) -#define MPI_EVENT_RAID_RC_PHYSDISK_SETTINGS_CHANGED (0x07) -#define MPI_EVENT_RAID_RC_PHYSDISK_STATUS_CHANGED (0x08) -#define MPI_EVENT_RAID_RC_DOMAIN_VAL_NEEDED (0x09) -#define MPI_EVENT_RAID_RC_SMART_DATA (0x0A) -#define MPI_EVENT_RAID_RC_REPLACE_ACTION_STARTED (0x0B) +/* SAS Phy Link Status Event data */ + +typedef struct _EVENT_DATA_SAS_PHY_LINK_STATUS +{ + U8 PhyNum; /* 00h */ + U8 LinkRates; /* 01h */ + U16 DevHandle; /* 02h */ + U64 SASAddress; /* 04h */ +} EVENT_DATA_SAS_PHY_LINK_STATUS, MPI_POINTER PTR_EVENT_DATA_SAS_PHY_LINK_STATUS, + MpiEventDataSasPhyLinkStatus_t, MPI_POINTER pMpiEventDataSasPhyLinkStatus_t; + +/* defines for the LinkRates field of the SAS PHY Link Status event */ +#define MPI_EVENT_SAS_PLS_LR_CURRENT_MASK (0xF0) +#define MPI_EVENT_SAS_PLS_LR_CURRENT_SHIFT (4) +#define MPI_EVENT_SAS_PLS_LR_PREVIOUS_MASK (0x0F) +#define MPI_EVENT_SAS_PLS_LR_PREVIOUS_SHIFT (0) +#define MPI_EVENT_SAS_PLS_LR_RATE_UNKNOWN (0x00) +#define MPI_EVENT_SAS_PLS_LR_RATE_PHY_DISABLED (0x01) +#define MPI_EVENT_SAS_PLS_LR_RATE_FAILED_SPEED_NEGOTIATION (0x02) +#define MPI_EVENT_SAS_PLS_LR_RATE_SATA_OOB_COMPLETE (0x03) +#define MPI_EVENT_SAS_PLS_LR_RATE_1_5 (0x08) +#define MPI_EVENT_SAS_PLS_LR_RATE_3_0 (0x09) + +/* SAS Discovery Errror Event data */ + +typedef struct _EVENT_DATA_DISCOVERY_ERROR +{ + U32 DiscoveryStatus; /* 00h */ + U8 Port; /* 04h */ + U8 Reserved1; /* 05h */ + U16 Reserved2; /* 06h */ +} EVENT_DATA_DISCOVERY_ERROR, MPI_POINTER PTR_EVENT_DATA_DISCOVERY_ERROR, + EventDataDiscoveryError_t, MPI_POINTER pEventDataDiscoveryError_t; + +#define MPI_EVENT_DSCVRY_ERR_DS_LOOP_DETECTED (0x00000001) +#define MPI_EVENT_DSCVRY_ERR_DS_UNADDRESSABLE_DEVICE (0x00000002) +#define MPI_EVENT_DSCVRY_ERR_DS_MULTIPLE_PORTS (0x00000004) +#define MPI_EVENT_DSCVRY_ERR_DS_EXPANDER_ERR (0x00000008) +#define MPI_EVENT_DSCVRY_ERR_DS_SMP_TIMEOUT (0x00000010) +#define MPI_EVENT_DSCVRY_ERR_DS_OUT_ROUTE_ENTRIES (0x00000020) +#define MPI_EVENT_DSCVRY_ERR_DS_INDEX_NOT_EXIST (0x00000040) +#define MPI_EVENT_DSCVRY_ERR_DS_SMP_FUNCTION_FAILED (0x00000080) +#define MPI_EVENT_DSCVRY_ERR_DS_SMP_CRC_ERROR (0x00000100) +#define MPI_EVENT_DSCVRY_ERR_DS_MULTPL_SUBTRACTIVE (0x00000200) +#define MPI_EVENT_DSCVRY_ERR_DS_TABLE_TO_TABLE (0x00000400) +#define MPI_EVENT_DSCVRY_ERR_DS_MULTPL_PATHS (0x00000800) /***************************************************************************** @@ -589,11 +702,13 @@ typedef struct _MSG_FW_DOWNLOAD } MSG_FW_DOWNLOAD, MPI_POINTER PTR_MSG_FW_DOWNLOAD, FWDownload_t, MPI_POINTER pFWDownload_t; -#define MPI_FW_DOWNLOAD_ITYPE_RESERVED (0x00) -#define MPI_FW_DOWNLOAD_ITYPE_FW (0x01) -#define MPI_FW_DOWNLOAD_ITYPE_BIOS (0x02) -#define MPI_FW_DOWNLOAD_ITYPE_NVDATA (0x03) -#define MPI_FW_DOWNLOAD_ITYPE_BOOTLOADER (0x04) +#define MPI_FW_DOWNLOAD_MSGFLGS_LAST_SEGMENT (0x01) + +#define MPI_FW_DOWNLOAD_ITYPE_RESERVED (0x00) +#define MPI_FW_DOWNLOAD_ITYPE_FW (0x01) +#define MPI_FW_DOWNLOAD_ITYPE_BIOS (0x02) +#define MPI_FW_DOWNLOAD_ITYPE_NVDATA (0x03) +#define MPI_FW_DOWNLOAD_ITYPE_BOOTLOADER (0x04) typedef struct _FWDownloadTCSGE @@ -647,6 +762,7 @@ typedef struct _MSG_FW_UPLOAD #define MPI_FW_UPLOAD_ITYPE_BIOS_FLASH (0x02) #define MPI_FW_UPLOAD_ITYPE_NVDATA (0x03) #define MPI_FW_UPLOAD_ITYPE_BOOTLOADER (0x04) +#define MPI_FW_UPLOAD_ITYPE_FW_BACKUP (0x05) typedef struct _FWUploadTCSGE { @@ -723,6 +839,7 @@ typedef struct _MPI_FW_HEADER #define MPI_FW_HEADER_PID_PROD_IM_SCSI (0x0400) #define MPI_FW_HEADER_PID_PROD_IS_SCSI (0x0500) #define MPI_FW_HEADER_PID_PROD_CTX_SCSI (0x0600) +#define MPI_FW_HEADER_PID_PROD_IR_SCSI (0x0700) #define MPI_FW_HEADER_PID_FAMILY_MASK (0x00FF) /* SCSI */ @@ -740,13 +857,16 @@ typedef struct _MPI_FW_HEADER #define MPI_FW_HEADER_PID_FAMILY_1020TA0_SCSI (0x000C) /* Fibre Channel */ #define MPI_FW_HEADER_PID_FAMILY_909_FC (0x0000) -#define MPI_FW_HEADER_PID_FAMILY_919_FC (0x0001) -#define MPI_FW_HEADER_PID_FAMILY_919X_FC (0x0002) -#define MPI_FW_HEADER_PID_FAMILY_919XL_FC (0x0003) -#define MPI_FW_HEADER_PID_FAMILY_949_FC (0x0004) +#define MPI_FW_HEADER_PID_FAMILY_919_FC (0x0001) /* 919 and 929 */ +#define MPI_FW_HEADER_PID_FAMILY_919X_FC (0x0002) /* 919X and 929X */ +#define MPI_FW_HEADER_PID_FAMILY_919XL_FC (0x0003) /* 919XL and 929XL */ +#define MPI_FW_HEADER_PID_FAMILY_939X_FC (0x0004) /* 939X and 949X */ #define MPI_FW_HEADER_PID_FAMILY_959_FC (0x0005) /* SAS */ #define MPI_FW_HEADER_PID_FAMILY_1064_SAS (0x0001) +#define MPI_FW_HEADER_PID_FAMILY_1068_SAS (0x0002) +#define MPI_FW_HEADER_PID_FAMILY_1078_SAS (0x0003) +#define MPI_FW_HEADER_PID_FAMILY_106xE_SAS (0x0004) /* 1068E, 1066E, and 1064E */ typedef struct _MPI_EXT_IMAGE_HEADER { diff --git a/drivers/message/fusion/lsi/mpi_lan.h b/drivers/message/fusion/lsi/mpi_lan.h index 3ced12784ee..dc0b52ae83d 100644 --- a/drivers/message/fusion/lsi/mpi_lan.h +++ b/drivers/message/fusion/lsi/mpi_lan.h @@ -1,12 +1,12 @@ /* - * Copyright (c) 2000-2003 LSI Logic Corporation. + * Copyright (c) 2000-2004 LSI Logic Corporation. * * * Name: mpi_lan.h * Title: MPI LAN messages and structures * Creation Date: June 30, 2000 * - * mpi_lan.h Version: 01.05.xx + * mpi_lan.h Version: 01.05.01 * * Version History * --------------- @@ -28,6 +28,8 @@ * 02-20-01 01.01.02 Started using MPI_POINTER. * 03-27-01 01.01.03 Added structure offset comments. * 08-08-01 01.02.01 Original release for v1.2 work. + * 05-11-04 01.03.01 Original release for MPI v1.3. + * 08-19-04 01.05.01 Original release for MPI v1.5. * -------------------------------------------------------------------------- */ diff --git a/drivers/message/fusion/lsi/mpi_raid.h b/drivers/message/fusion/lsi/mpi_raid.h index 9580a9de7fd..802255d2747 100644 --- a/drivers/message/fusion/lsi/mpi_raid.h +++ b/drivers/message/fusion/lsi/mpi_raid.h @@ -1,12 +1,12 @@ /* - * Copyright (c) 2001-2003 LSI Logic Corporation. + * Copyright (c) 2001-2005 LSI Logic Corporation. * * * Name: mpi_raid.h * Title: MPI RAID message and structures * Creation Date: February 27, 2001 * - * mpi_raid.h Version: 01.05.xx + * mpi_raid.h Version: 01.05.02 * * Version History * --------------- @@ -28,6 +28,10 @@ * 11-15-02 01.02.08 Added missing MsgContext field to MSG_MAILBOX_REQUEST. * 04-01-03 01.02.09 New action data option flag for * MPI_RAID_ACTION_DELETE_VOLUME. + * 05-11-04 01.03.01 Original release for MPI v1.3. + * 08-19-04 01.05.01 Original release for MPI v1.5. + * 01-15-05 01.05.02 Added defines for the two new RAID Actions for + * _SET_RESYNC_RATE and _SET_DATA_SCRUB_RATE. * -------------------------------------------------------------------------- */ @@ -84,6 +88,8 @@ typedef struct _MSG_RAID_ACTION #define MPI_RAID_ACTION_REPLACE_PHYSDISK (0x10) #define MPI_RAID_ACTION_ACTIVATE_VOLUME (0x11) #define MPI_RAID_ACTION_INACTIVATE_VOLUME (0x12) +#define MPI_RAID_ACTION_SET_RESYNC_RATE (0x13) +#define MPI_RAID_ACTION_SET_DATA_SCRUB_RATE (0x14) /* ActionDataWord defines for use with MPI_RAID_ACTION_CREATE_VOLUME action */ #define MPI_RAID_ACTION_ADATA_DO_NOT_SYNC (0x00000001) @@ -99,6 +105,13 @@ typedef struct _MSG_RAID_ACTION /* ActionDataWord defines for use with MPI_RAID_ACTION_ACTIVATE_VOLUME action */ #define MPI_RAID_ACTION_ADATA_INACTIVATE_ALL (0x00000001) +/* ActionDataWord defines for use with MPI_RAID_ACTION_SET_RESYNC_RATE action */ +#define MPI_RAID_ACTION_ADATA_RESYNC_RATE_MASK (0x000000FF) + +/* ActionDataWord defines for use with MPI_RAID_ACTION_SET_DATA_SCRUB_RATE action */ +#define MPI_RAID_ACTION_ADATA_DATA_SCRUB_RATE_MASK (0x000000FF) + + /* RAID Action reply message */ diff --git a/drivers/message/fusion/lsi/mpi_sas.h b/drivers/message/fusion/lsi/mpi_sas.h index cb878f9c65d..230fa69b535 100644 --- a/drivers/message/fusion/lsi/mpi_sas.h +++ b/drivers/message/fusion/lsi/mpi_sas.h @@ -1,25 +1,76 @@ /* - * Copyright (c) 2003 LSI Logic Corporation. + * Copyright (c) 2004 LSI Logic Corporation. * * * Name: mpi_sas.h * Title: MPI Serial Attached SCSI structures and definitions - * Creation Date: April 23, 2003 + * Creation Date: August 19, 2004 * - * mpi_sas.h Version: 01.05.xx + * mpi_sas.h Version: 01.05.01 * * Version History * --------------- * * Date Version Description * -------- -------- ------------------------------------------------------ - * xx-yy-zz 01.05.01 Original release. + * 08-19-04 01.05.01 Original release. * -------------------------------------------------------------------------- */ #ifndef MPI_SAS_H #define MPI_SAS_H + +/* + * Values for SASStatus. + */ +#define MPI_SASSTATUS_SUCCESS (0x00) +#define MPI_SASSTATUS_UNKNOWN_ERROR (0x01) +#define MPI_SASSTATUS_INVALID_FRAME (0x02) +#define MPI_SASSTATUS_UTC_BAD_DEST (0x03) +#define MPI_SASSTATUS_UTC_BREAK_RECEIVED (0x04) +#define MPI_SASSTATUS_UTC_CONNECT_RATE_NOT_SUPPORTED (0x05) +#define MPI_SASSTATUS_UTC_PORT_LAYER_REQUEST (0x06) +#define MPI_SASSTATUS_UTC_PROTOCOL_NOT_SUPPORTED (0x07) +#define MPI_SASSTATUS_UTC_STP_RESOURCES_BUSY (0x08) +#define MPI_SASSTATUS_UTC_WRONG_DESTINATION (0x09) +#define MPI_SASSTATUS_SHORT_INFORMATION_UNIT (0x0A) +#define MPI_SASSTATUS_LONG_INFORMATION_UNIT (0x0B) +#define MPI_SASSTATUS_XFER_RDY_INCORRECT_WRITE_DATA (0x0C) +#define MPI_SASSTATUS_XFER_RDY_REQUEST_OFFSET_ERROR (0x0D) +#define MPI_SASSTATUS_XFER_RDY_NOT_EXPECTED (0x0E) +#define MPI_SASSTATUS_DATA_INCORRECT_DATA_LENGTH (0x0F) +#define MPI_SASSTATUS_DATA_TOO_MUCH_READ_DATA (0x10) +#define MPI_SASSTATUS_DATA_OFFSET_ERROR (0x11) +#define MPI_SASSTATUS_SDSF_NAK_RECEIVED (0x12) +#define MPI_SASSTATUS_SDSF_CONNECTION_FAILED (0x13) +#define MPI_SASSTATUS_INITIATOR_RESPONSE_TIMEOUT (0x14) + + +/* + * Values for the SAS DeviceInfo field used in SAS Device Status Change Event + * data and SAS IO Unit Configuration pages. + */ +#define MPI_SAS_DEVICE_INFO_ATAPI_DEVICE (0x00002000) +#define MPI_SAS_DEVICE_INFO_LSI_DEVICE (0x00001000) +#define MPI_SAS_DEVICE_INFO_DIRECT_ATTACH (0x00000800) +#define MPI_SAS_DEVICE_INFO_SSP_TARGET (0x00000400) +#define MPI_SAS_DEVICE_INFO_STP_TARGET (0x00000200) +#define MPI_SAS_DEVICE_INFO_SMP_TARGET (0x00000100) +#define MPI_SAS_DEVICE_INFO_SATA_DEVICE (0x00000080) +#define MPI_SAS_DEVICE_INFO_SSP_INITIATOR (0x00000040) +#define MPI_SAS_DEVICE_INFO_STP_INITIATOR (0x00000020) +#define MPI_SAS_DEVICE_INFO_SMP_INITIATOR (0x00000010) +#define MPI_SAS_DEVICE_INFO_SATA_HOST (0x00000008) + +#define MPI_SAS_DEVICE_INFO_MASK_DEVICE_TYPE (0x00000007) +#define MPI_SAS_DEVICE_INFO_NO_DEVICE (0x00000000) +#define MPI_SAS_DEVICE_INFO_END_DEVICE (0x00000001) +#define MPI_SAS_DEVICE_INFO_EDGE_EXPANDER (0x00000002) +#define MPI_SAS_DEVICE_INFO_FANOUT_EXPANDER (0x00000003) + + + /***************************************************************************** * * S e r i a l A t t a c h e d S C S I M e s s a g e s @@ -48,8 +99,10 @@ typedef struct _MSG_SMP_PASSTHROUGH_REQUEST } MSG_SMP_PASSTHROUGH_REQUEST, MPI_POINTER PTR_MSG_SMP_PASSTHROUGH_REQUEST, SmpPassthroughRequest_t, MPI_POINTER pSmpPassthroughRequest_t; +/* values for PassthroughFlags field */ #define MPI_SMP_PT_REQ_PT_FLAGS_IMMEDIATE (0x80) +/* values for ConnectionRate field */ #define MPI_SMP_PT_REQ_CONNECT_RATE_NEGOTIATED (0x00) #define MPI_SMP_PT_REQ_CONNECT_RATE_1_5 (0x08) #define MPI_SMP_PT_REQ_CONNECT_RATE_3_0 (0x09) @@ -77,51 +130,69 @@ typedef struct _MSG_SMP_PASSTHROUGH_REPLY #define MPI_SMP_PT_REPLY_PT_FLAGS_IMMEDIATE (0x80) -/* values for the SASStatus field */ -#define MPI_SASSTATUS_SUCCESS (0x00) -#define MPI_SASSTATUS_UNKNOWN_ERROR (0x01) -#define MPI_SASSTATUS_INVALID_FRAME (0x02) -#define MPI_SASSTATUS_UTC_BAD_DEST (0x03) -#define MPI_SASSTATUS_UTC_BREAK_RECEIVED (0x04) -#define MPI_SASSTATUS_UTC_CONNECT_RATE_NOT_SUPPORTED (0x05) -#define MPI_SASSTATUS_UTC_PORT_LAYER_REQUEST (0x06) -#define MPI_SASSTATUS_UTC_PROTOCOL_NOT_SUPPORTED (0x07) -#define MPI_SASSTATUS_UTC_STP_RESOURCES_BUSY (0x08) -#define MPI_SASSTATUS_UTC_WRONG_DESTINATION (0x09) -#define MPI_SASSTATUS_SHORT_INFORMATION_UNIT (0x0A) -#define MPI_SASSTATUS_LONG_INFORMATION_UNIT (0x0B) -#define MPI_SASSTATUS_XFER_RDY_INCORRECT_WRITE_DATA (0x0C) -#define MPI_SASSTATUS_XFER_RDY_REQUEST_OFFSET_ERROR (0x0D) -#define MPI_SASSTATUS_XFER_RDY_NOT_EXPECTED (0x0E) -#define MPI_SASSTATUS_DATA_INCORRECT_DATA_LENGTH (0x0F) -#define MPI_SASSTATUS_DATA_TOO_MUCH_READ_DATA (0x10) -#define MPI_SASSTATUS_DATA_OFFSET_ERROR (0x11) -#define MPI_SASSTATUS_SDSF_NAK_RECEIVED (0x12) -#define MPI_SASSTATUS_SDSF_CONNECTION_FAILED (0x13) -#define MPI_SASSTATUS_INITIATOR_RESPONSE_TIMEOUT (0x14) +/****************************************************************************/ +/* SATA Passthrough Request */ +/****************************************************************************/ + +typedef struct _MSG_SATA_PASSTHROUGH_REQUEST +{ + U8 TargetID; /* 00h */ + U8 Bus; /* 01h */ + U8 ChainOffset; /* 02h */ + U8 Function; /* 03h */ + U16 PassthroughFlags; /* 04h */ + U8 ConnectionRate; /* 06h */ + U8 MsgFlags; /* 07h */ + U32 MsgContext; /* 08h */ + U32 Reserved1; /* 0Ch */ + U32 Reserved2; /* 10h */ + U32 Reserved3; /* 14h */ + U32 DataLength; /* 18h */ + U8 CommandFIS[20]; /* 1Ch */ + SGE_SIMPLE_UNION SGL; /* 30h */ +} MSG_SATA_PASSTHROUGH_REQUEST, MPI_POINTER PTR_MSG_SATA_PASSTHROUGH_REQUEST, + SataPassthroughRequest_t, MPI_POINTER pSataPassthroughRequest_t; + +/* values for PassthroughFlags field */ +#define MPI_SATA_PT_REQ_PT_FLAGS_RESET_DEVICE (0x0200) +#define MPI_SATA_PT_REQ_PT_FLAGS_EXECUTE_DIAG (0x0100) +#define MPI_SATA_PT_REQ_PT_FLAGS_DMA_QUEUED (0x0080) +#define MPI_SATA_PT_REQ_PT_FLAGS_PACKET_COMMAND (0x0040) +#define MPI_SATA_PT_REQ_PT_FLAGS_DMA (0x0020) +#define MPI_SATA_PT_REQ_PT_FLAGS_PIO (0x0010) +#define MPI_SATA_PT_REQ_PT_FLAGS_UNSPECIFIED_VU (0x0004) +#define MPI_SATA_PT_REQ_PT_FLAGS_WRITE (0x0002) +#define MPI_SATA_PT_REQ_PT_FLAGS_READ (0x0001) + +/* values for ConnectionRate field */ +#define MPI_SATA_PT_REQ_CONNECT_RATE_NEGOTIATED (0x00) +#define MPI_SATA_PT_REQ_CONNECT_RATE_1_5 (0x08) +#define MPI_SATA_PT_REQ_CONNECT_RATE_3_0 (0x09) + + +/* SATA Passthrough Reply */ +typedef struct _MSG_SATA_PASSTHROUGH_REPLY +{ + U8 TargetID; /* 00h */ + U8 Bus; /* 01h */ + U8 MsgLength; /* 02h */ + U8 Function; /* 03h */ + U16 PassthroughFlags; /* 04h */ + U8 Reserved1; /* 06h */ + U8 MsgFlags; /* 07h */ + U32 MsgContext; /* 08h */ + U8 Reserved2; /* 0Ch */ + U8 SASStatus; /* 0Dh */ + U16 IOCStatus; /* 0Eh */ + U32 IOCLogInfo; /* 10h */ + U8 StatusFIS[20]; /* 14h */ + U32 StatusControlRegisters; /* 28h */ + U32 TransferCount; /* 2Ch */ +} MSG_SATA_PASSTHROUGH_REPLY, MPI_POINTER PTR_MSG_SATA_PASSTHROUGH_REPLY, + SataPassthroughReply_t, MPI_POINTER pSataPassthroughReply_t; -/* - * Values for the SAS DeviceInfo field used in SAS Device Status Change Event - * data and SAS IO Unit Configuration pages. - */ -#define MPI_SAS_DEVICE_INFO_ATAPI_DEVICE (0x00002000) -#define MPI_SAS_DEVICE_INFO_LSI_DEVICE (0x00001000) -#define MPI_SAS_DEVICE_INFO_DIRECT_ATTACH (0x00000800) -#define MPI_SAS_DEVICE_INFO_SSP_TARGET (0x00000400) -#define MPI_SAS_DEVICE_INFO_STP_TARGET (0x00000200) -#define MPI_SAS_DEVICE_INFO_SMP_TARGET (0x00000100) -#define MPI_SAS_DEVICE_INFO_SATA_DEVICE (0x00000080) -#define MPI_SAS_DEVICE_INFO_SSP_INITIATOR (0x00000040) -#define MPI_SAS_DEVICE_INFO_STP_INITIATOR (0x00000020) -#define MPI_SAS_DEVICE_INFO_SMP_INITIATOR (0x00000010) -#define MPI_SAS_DEVICE_INFO_SATA_HOST (0x00000008) -#define MPI_SAS_DEVICE_INFO_MASK_DEVICE_TYPE (0x00000007) -#define MPI_SAS_DEVICE_INFO_NO_DEVICE (0x00000000) -#define MPI_SAS_DEVICE_INFO_END_DEVICE (0x00000001) -#define MPI_SAS_DEVICE_INFO_EDGE_EXPANDER (0x00000002) -#define MPI_SAS_DEVICE_INFO_FANOUT_EXPANDER (0x00000003) /****************************************************************************/ @@ -148,15 +219,13 @@ typedef struct _MSG_SAS_IOUNIT_CONTROL_REQUEST } MSG_SAS_IOUNIT_CONTROL_REQUEST, MPI_POINTER PTR_MSG_SAS_IOUNIT_CONTROL_REQUEST, SasIoUnitControlRequest_t, MPI_POINTER pSasIoUnitControlRequest_t; -/* values for the ... field */ +/* values for the Operation field */ #define MPI_SAS_OP_CLEAR_NOT_PRESENT (0x01) -#define MPI_SAS_OP_CLEAR_ALL (0x02) -#define MPI_SAS_OP_MAP (0x03) -#define MPI_SAS_OP_MOVE (0x04) -#define MPI_SAS_OP_CLEAR (0x05) +#define MPI_SAS_OP_CLEAR_ALL_PERSISTENT (0x02) #define MPI_SAS_OP_PHY_LINK_RESET (0x06) #define MPI_SAS_OP_PHY_HARD_RESET (0x07) #define MPI_SAS_OP_PHY_CLEAR_ERROR_LOG (0x08) +#define MPI_SAS_OP_MAP_CURRENT (0x09) /* SAS IO Unit Control Reply */ diff --git a/drivers/message/fusion/lsi/mpi_targ.h b/drivers/message/fusion/lsi/mpi_targ.h index 804dc85426c..623901fd82b 100644 --- a/drivers/message/fusion/lsi/mpi_targ.h +++ b/drivers/message/fusion/lsi/mpi_targ.h @@ -1,12 +1,12 @@ /* - * Copyright (c) 2000-2003 LSI Logic Corporation. + * Copyright (c) 2000-2004 LSI Logic Corporation. * * * Name: mpi_targ.h * Title: MPI Target mode messages and structures * Creation Date: June 22, 2000 * - * mpi_targ.h Version: 01.05.xx + * mpi_targ.h Version: 01.05.04 * * Version History * --------------- @@ -43,6 +43,16 @@ * Added PRIORITY_REASON_TARGET_BUSY. * 11-15-02 01.02.08 Added AliasID field to MPI_TARGET_SCSI_SPI_CMD_BUFFER. * 04-01-03 01.02.09 Added OptionalOxid field to MPI_TARGET_FCP_CMD_BUFFER. + * 05-11-04 01.03.01 Original release for MPI v1.3. + * 08-19-04 01.05.01 Added new request message structures for + * MSG_TARGET_CMD_BUF_POST_BASE_REQUEST, + * MSG_TARGET_CMD_BUF_POST_LIST_REQUEST, and + * MSG_TARGET_ASSIST_EXT_REQUEST. + * Added new structures for SAS SSP Command buffer, SSP + * Task buffer, and SSP Status IU. + * 10-05-04 01.05.02 MSG_TARGET_CMD_BUFFER_POST_BASE_LIST_REPLY added. + * 02-22-05 01.05.03 Changed a comment. + * 03-11-05 01.05.04 Removed TargetAssistExtended Request. * -------------------------------------------------------------------------- */ @@ -133,6 +143,25 @@ typedef struct _MSG_PRIORITY_CMD_RECEIVED_REPLY } MSG_PRIORITY_CMD_RECEIVED_REPLY, MPI_POINTER PTR_MSG_PRIORITY_CMD_RECEIVED_REPLY, PriorityCommandReceivedReply_t, MPI_POINTER pPriorityCommandReceivedReply_t; + +typedef struct _MSG_TARGET_CMD_BUFFER_POST_ERROR_REPLY +{ + U16 Reserved; /* 00h */ + U8 MsgLength; /* 02h */ + U8 Function; /* 03h */ + U16 Reserved1; /* 04h */ + U8 Reserved2; /* 06h */ + U8 MsgFlags; /* 07h */ + U32 MsgContext; /* 08h */ + U8 PriorityReason; /* 0Ch */ + U8 Reserved3; /* 0Dh */ + U16 IOCStatus; /* 0Eh */ + U32 IOCLogInfo; /* 10h */ + U32 ReplyWord; /* 14h */ +} MSG_TARGET_CMD_BUFFER_POST_ERROR_REPLY, + MPI_POINTER PTR_MSG_TARGET_CMD_BUFFER_POST_ERROR_REPLY, + TargetCmdBufferPostErrorReply_t, MPI_POINTER pTargetCmdBufferPostErrorReply_t; + #define PRIORITY_REASON_NO_DISCONNECT (0x00) #define PRIORITY_REASON_SCSI_TASK_MANAGEMENT (0x01) #define PRIORITY_REASON_CMD_PARITY_ERR (0x02) @@ -146,7 +175,34 @@ typedef struct _MSG_PRIORITY_CMD_RECEIVED_REPLY #define PRIORITY_REASON_UNKNOWN (0xFF) -typedef struct _MSG_TARGET_CMD_BUFFER_POST_ERROR_REPLY +/****************************************************************************/ +/* Target Command Buffer Post Base Request */ +/****************************************************************************/ + +typedef struct _MSG_TARGET_CMD_BUF_POST_BASE_REQUEST +{ + U8 BufferPostFlags; /* 00h */ + U8 PortNumber; /* 01h */ + U8 ChainOffset; /* 02h */ + U8 Function; /* 03h */ + U16 TotalCmdBuffers; /* 04h */ + U8 Reserved; /* 06h */ + U8 MsgFlags; /* 07h */ + U32 MsgContext; /* 08h */ + U32 Reserved1; /* 0Ch */ + U16 CmdBufferLength; /* 10h */ + U16 NextCmdBufferOffset; /* 12h */ + U32 BaseAddressLow; /* 14h */ + U32 BaseAddressHigh; /* 18h */ +} MSG_TARGET_CMD_BUF_POST_BASE_REQUEST, + MPI_POINTER PTR__MSG_TARGET_CMD_BUF_POST_BASE_REQUEST, + TargetCmdBufferPostBaseRequest_t, + MPI_POINTER pTargetCmdBufferPostBaseRequest_t; + +#define CMD_BUFFER_POST_BASE_FLAGS_AUTO_POST_ALL (0x01) + + +typedef struct _MSG_TARGET_CMD_BUFFER_POST_BASE_LIST_REPLY { U16 Reserved; /* 00h */ U8 MsgLength; /* 02h */ @@ -155,16 +211,41 @@ typedef struct _MSG_TARGET_CMD_BUFFER_POST_ERROR_REPLY U8 Reserved2; /* 06h */ U8 MsgFlags; /* 07h */ U32 MsgContext; /* 08h */ - U8 PriorityReason; /* 0Ch */ - U8 Reserved3; /* 0Dh */ + U16 Reserved3; /* 0Ch */ U16 IOCStatus; /* 0Eh */ U32 IOCLogInfo; /* 10h */ - U32 ReplyWord; /* 14h */ -} MSG_TARGET_CMD_BUFFER_POST_ERROR_REPLY, - MPI_POINTER PTR_MSG_TARGET_CMD_BUFFER_POST_ERROR_REPLY, - TargetCmdBufferPostErrorReply_t, MPI_POINTER pTargetCmdBufferPostErrorReply_t; +} MSG_TARGET_CMD_BUFFER_POST_BASE_LIST_REPLY, + MPI_POINTER PTR_MSG_TARGET_CMD_BUFFER_POST_BASE_LIST_REPLY, + TargetCmdBufferPostBaseListReply_t, + MPI_POINTER pTargetCmdBufferPostBaseListReply_t; + + +/****************************************************************************/ +/* Target Command Buffer Post List Request */ +/****************************************************************************/ + +typedef struct _MSG_TARGET_CMD_BUF_POST_LIST_REQUEST +{ + U8 Reserved; /* 00h */ + U8 PortNumber; /* 01h */ + U8 ChainOffset; /* 02h */ + U8 Function; /* 03h */ + U16 CmdBufferCount; /* 04h */ + U8 Reserved1; /* 06h */ + U8 MsgFlags; /* 07h */ + U32 MsgContext; /* 08h */ + U32 Reserved2; /* 0Ch */ + U16 IoIndex[2]; /* 10h */ +} MSG_TARGET_CMD_BUF_POST_LIST_REQUEST, + MPI_POINTER PTR_MSG_TARGET_CMD_BUF_POST_LIST_REQUEST, + TargetCmdBufferPostListRequest_t, + MPI_POINTER pTargetCmdBufferPostListRequest_t; +/****************************************************************************/ +/* Command Buffer Formats (with 16 byte CDB) */ +/****************************************************************************/ + typedef struct _MPI_TARGET_FCP_CMD_BUFFER { U8 FcpLun[8]; /* 00h */ @@ -201,6 +282,46 @@ typedef struct _MPI_TARGET_SCSI_SPI_CMD_BUFFER MpiTargetScsiSpiCmdBuffer, MPI_POINTER pMpiTargetScsiSpiCmdBuffer; +typedef struct _MPI_TARGET_SSP_CMD_BUFFER +{ + U8 FrameType; /* 00h */ + U8 Reserved1; /* 01h */ + U16 Reserved2; /* 02h */ + U16 InitiatorTag; /* 04h */ + U16 DevHandle; /* 06h */ + /* COMMAND information unit starts here */ + U8 LogicalUnitNumber[8]; /* 08h */ + U8 Reserved3; /* 10h */ + U8 TaskAttribute; /* lower 3 bits */ /* 11h */ + U8 Reserved4; /* 12h */ + U8 AdditionalCDBLength; /* upper 5 bits */ /* 13h */ + U8 CDB[16]; /* 14h */ + /* Additional CDB bytes extend past the CDB field */ +} MPI_TARGET_SSP_CMD_BUFFER, MPI_POINTER PTR_MPI_TARGET_SSP_CMD_BUFFER, + MpiTargetSspCmdBuffer, MPI_POINTER pMpiTargetSspCmdBuffer; + +typedef struct _MPI_TARGET_SSP_TASK_BUFFER +{ + U8 FrameType; /* 00h */ + U8 Reserved1; /* 01h */ + U16 Reserved2; /* 02h */ + U16 InitiatorTag; /* 04h */ + U16 DevHandle; /* 06h */ + /* TASK information unit starts here */ + U8 LogicalUnitNumber[8]; /* 08h */ + U8 Reserved3; /* 10h */ + U8 Reserved4; /* 11h */ + U8 TaskManagementFunction; /* 12h */ + U8 Reserved5; /* 13h */ + U16 ManagedTaskTag; /* 14h */ + U16 Reserved6; /* 16h */ + U32 Reserved7; /* 18h */ + U32 Reserved8; /* 1Ch */ + U32 Reserved9; /* 20h */ +} MPI_TARGET_SSP_TASK_BUFFER, MPI_POINTER PTR_MPI_TARGET_SSP_TASK_BUFFER, + MpiTargetSspTaskBuffer, MPI_POINTER pMpiTargetSspTaskBuffer; + + /****************************************************************************/ /* Target Assist Request */ /****************************************************************************/ @@ -308,6 +429,27 @@ typedef struct _MPI_TARGET_SCSI_SPI_STATUS_IU } MPI_TARGET_SCSI_SPI_STATUS_IU, MPI_POINTER PTR_MPI_TARGET_SCSI_SPI_STATUS_IU, TargetScsiSpiStatusIU_t, MPI_POINTER pTargetScsiSpiStatusIU_t; +/* + * NOTE: The SSP status IU is big-endian. When used on a little-endian system, + * this structure properly orders the bytes. + */ +typedef struct _MPI_TARGET_SSP_RSP_IU +{ + U32 Reserved0[6]; /* reserved for SSP header */ /* 00h */ + /* start of RESPONSE information unit */ + U32 Reserved1; /* 18h */ + U32 Reserved2; /* 1Ch */ + U16 Reserved3; /* 20h */ + U8 DataPres; /* lower 2 bits */ /* 22h */ + U8 Status; /* 23h */ + U32 Reserved4; /* 24h */ + U32 SenseDataLength; /* 28h */ + U32 ResponseDataLength; /* 2Ch */ + U8 ResponseSenseData[4]; /* 30h */ +} MPI_TARGET_SSP_RSP_IU, MPI_POINTER PTR_MPI_TARGET_SSP_RSP_IU, + MpiTargetSspRspIu_t, MPI_POINTER pMpiTargetSspRspIu_t; + + /****************************************************************************/ /* Target Mode Abort Request */ /****************************************************************************/ diff --git a/drivers/message/fusion/lsi/mpi_tool.h b/drivers/message/fusion/lsi/mpi_tool.h index 536d197c414..aa9053da1f5 100644 --- a/drivers/message/fusion/lsi/mpi_tool.h +++ b/drivers/message/fusion/lsi/mpi_tool.h @@ -1,12 +1,12 @@ /* - * Copyright (c) 2001-2003 LSI Logic Corporation. + * Copyright (c) 2001-2005 LSI Logic Corporation. * * * Name: mpi_tool.h * Title: MPI Toolbox structures and definitions * Creation Date: July 30, 2001 * - * mpi_tool.h Version: 01.05.xx + * mpi_tool.h Version: 01.05.03 * * Version History * --------------- @@ -15,6 +15,16 @@ * -------- -------- ------------------------------------------------------ * 08-08-01 01.02.01 Original release. * 08-29-01 01.02.02 Added DIAG_DATA_UPLOAD_HEADER and related defines. + * 01-16-04 01.02.03 Added defines and structures for new tools + *. MPI_TOOLBOX_ISTWI_READ_WRITE_TOOL and + * MPI_TOOLBOX_FC_MANAGEMENT_TOOL. + * 04-29-04 01.02.04 Added message structures for Diagnostic Buffer Post and + * Diagnostic Release requests and replies. + * 05-11-04 01.03.01 Original release for MPI v1.3. + * 08-19-04 01.05.01 Original release for MPI v1.5. + * 10-06-04 01.05.02 Added define for MPI_DIAG_BUF_TYPE_COUNT. + * 02-09-05 01.05.03 Added frame size option to FC management tool. + * Added Beacon tool to the Toolbox. * -------------------------------------------------------------------------- */ @@ -26,6 +36,7 @@ #define MPI_TOOLBOX_DIAG_DATA_UPLOAD_TOOL (0x02) #define MPI_TOOLBOX_ISTWI_READ_WRITE_TOOL (0x03) #define MPI_TOOLBOX_FC_MANAGEMENT_TOOL (0x04) +#define MPI_TOOLBOX_BEACON_TOOL (0x05) /****************************************************************************/ @@ -185,11 +196,21 @@ typedef struct _MPI_TB_FC_MANAGE_PID_AI } MPI_TB_FC_MANAGE_PID_AI, MPI_POINTER PTR_MPI_TB_FC_MANAGE_PID_AI, MpiTbFcManagePidAi_t, MPI_POINTER pMpiTbFcManagePidAi_t; +/* ActionInfo for set max frame size */ +typedef struct _MPI_TB_FC_MANAGE_FRAME_SIZE_AI +{ + U16 FrameSize; /* 00h */ + U8 PortNum; /* 02h */ + U8 Reserved1; /* 03h */ +} MPI_TB_FC_MANAGE_FRAME_SIZE_AI, MPI_POINTER PTR_MPI_TB_FC_MANAGE_FRAME_SIZE_AI, + MpiTbFcManageFrameSizeAi_t, MPI_POINTER pMpiTbFcManageFrameSizeAi_t; + /* union of ActionInfo */ typedef union _MPI_TB_FC_MANAGE_AI_UNION { MPI_TB_FC_MANAGE_BUS_TID_AI BusTid; MPI_TB_FC_MANAGE_PID_AI Port; + MPI_TB_FC_MANAGE_FRAME_SIZE_AI FrameSize; } MPI_TB_FC_MANAGE_AI_UNION, MPI_POINTER PTR_MPI_TB_FC_MANAGE_AI_UNION, MpiTbFcManageAiUnion_t, MPI_POINTER pMpiTbFcManageAiUnion_t; @@ -214,6 +235,32 @@ typedef struct _MSG_TOOLBOX_FC_MANAGE_REQUEST #define MPI_TB_FC_MANAGE_ACTION_DISC_ALL (0x00) #define MPI_TB_FC_MANAGE_ACTION_DISC_PID (0x01) #define MPI_TB_FC_MANAGE_ACTION_DISC_BUS_TID (0x02) +#define MPI_TB_FC_MANAGE_ACTION_SET_MAX_FRAME_SIZE (0x03) + + +/****************************************************************************/ +/* Toolbox Beacon Tool request */ +/****************************************************************************/ + +typedef struct _MSG_TOOLBOX_BEACON_REQUEST +{ + U8 Tool; /* 00h */ + U8 Reserved; /* 01h */ + U8 ChainOffset; /* 02h */ + U8 Function; /* 03h */ + U16 Reserved1; /* 04h */ + U8 Reserved2; /* 06h */ + U8 MsgFlags; /* 07h */ + U32 MsgContext; /* 08h */ + U8 ConnectNum; /* 0Ch */ + U8 PortNum; /* 0Dh */ + U8 Reserved3; /* 0Eh */ + U8 Flags; /* 0Fh */ +} MSG_TOOLBOX_BEACON_REQUEST, MPI_POINTER PTR_MSG_TOOLBOX_BEACON_REQUEST, + ToolboxBeaconRequest_t, MPI_POINTER pToolboxBeaconRequest_t; + +#define MPI_TOOLBOX_FLAGS_BEACON_MODE_OFF (0x00) +#define MPI_TOOLBOX_FLAGS_BEACON_MODE_ON (0x01) /****************************************************************************/ @@ -233,14 +280,16 @@ typedef struct _MSG_DIAG_BUFFER_POST_REQUEST U32 ExtendedType; /* 0Ch */ U32 BufferLength; /* 10h */ U32 ProductSpecific[4]; /* 14h */ - U32 Reserved3; /* 18h */ - SGE_SIMPLE_UNION SGL; /* 28h */ + U32 Reserved3; /* 24h */ + U64 BufferAddress; /* 28h */ } MSG_DIAG_BUFFER_POST_REQUEST, MPI_POINTER PTR_MSG_DIAG_BUFFER_POST_REQUEST, DiagBufferPostRequest_t, MPI_POINTER pDiagBufferPostRequest_t; #define MPI_DIAG_BUF_TYPE_TRACE (0x00) #define MPI_DIAG_BUF_TYPE_SNAPSHOT (0x01) #define MPI_DIAG_BUF_TYPE_EXTENDED (0x02) +/* count of the number of buffer types */ +#define MPI_DIAG_BUF_TYPE_COUNT (0x03) #define MPI_DIAG_EXTENDED_QTAG (0x00000001) diff --git a/drivers/message/fusion/lsi/mpi_type.h b/drivers/message/fusion/lsi/mpi_type.h index 239328a7689..32cc9b1151b 100644 --- a/drivers/message/fusion/lsi/mpi_type.h +++ b/drivers/message/fusion/lsi/mpi_type.h @@ -1,12 +1,12 @@ /* - * Copyright (c) 2000-2003 LSI Logic Corporation. + * Copyright (c) 2000-2004 LSI Logic Corporation. * * * Name: mpi_type.h * Title: MPI Basic type definitions * Creation Date: June 6, 2000 * - * mpi_type.h Version: 01.05.xx + * mpi_type.h Version: 01.05.01 * * Version History * --------------- @@ -18,6 +18,8 @@ * 11-02-00 01.01.01 Original release for post 1.0 work * 02-20-01 01.01.02 Added define and ifdef for MPI_POINTER. * 08-08-01 01.02.01 Original release for v1.2 work. + * 05-11-04 01.03.01 Original release for MPI v1.3. + * 08-19-04 01.05.01 Original release for MPI v1.5. * -------------------------------------------------------------------------- */ @@ -50,11 +52,6 @@ typedef unsigned short U16; typedef int32_t S32; typedef u_int32_t U32; -/* - * The only way crap below could work on big-endian boxen would be if it - * wasn't used at all. - */ - typedef struct _S64 { U32 Low; diff --git a/drivers/message/fusion/mptbase.c b/drivers/message/fusion/mptbase.c index 8b22630f1ae..8b623278ccd 100644 --- a/drivers/message/fusion/mptbase.c +++ b/drivers/message/fusion/mptbase.c @@ -1,55 +1,13 @@ /* * linux/drivers/message/fusion/mptbase.c - * High performance SCSI + LAN / Fibre Channel device drivers. * This is the Fusion MPT base driver which supports multiple * (SCSI + LAN) specialized protocol drivers. - * For use with PCI chip/adapter(s): - * LSIFC9xx/LSI409xx Fibre Channel + * For use with LSI Logic PCI chip/adapter(s) * running LSI Logic Fusion MPT (Message Passing Technology) firmware. * - * Credits: - * There are lots of people not mentioned below that deserve credit - * and thanks but won't get it here - sorry in advance that you - * got overlooked. - * - * This driver would not exist if not for Alan Cox's development - * of the linux i2o driver. - * - * A special thanks to Noah Romer (LSI Logic) for tons of work - * and tough debugging on the LAN driver, especially early on;-) - * And to Roger Hickerson (LSI Logic) for tirelessly supporting - * this driver project. - * - * A special thanks to Pamela Delaney (LSI Logic) for tons of work - * and countless enhancements while adding support for the 1030 - * chip family. Pam has been instrumental in the development of - * of the 2.xx.xx series fusion drivers, and her contributions are - * far too numerous to hope to list in one place. - * - * All manner of help from Stephen Shirron (LSI Logic): - * low-level FC analysis, debug + various fixes in FCxx firmware, - * initial port to alpha platform, various driver code optimizations, - * being a faithful sounding board on all sorts of issues & ideas, - * etc. - * - * A huge debt of gratitude is owed to David S. Miller (DaveM) - * for fixing much of the stupid and broken stuff in the early - * driver while porting to sparc64 platform. THANK YOU! - * - * Special thanks goes to the I2O LAN driver people at the - * University of Helsinki, who, unbeknownst to them, provided - * the inspiration and initial structure for this driver. - * - * A really huge debt of gratitude is owed to Eddie C. Dost - * for gobs of hard work fixing and optimizing LAN code. - * THANK YOU! - * - * Copyright (c) 1999-2004 LSI Logic Corporation - * Originally By: Steven J. Ralston - * (mailto:sjralston1@netscape.net) + * Copyright (c) 1999-2005 LSI Logic Corporation * (mailto:mpt_linux_developer@lsil.com) * - * $Id: mptbase.c,v 1.126 2002/12/16 15:28:45 pdelaney Exp $ */ /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ /* @@ -101,6 +59,7 @@ #include <linux/blkdev.h> #include <linux/delay.h> #include <linux/interrupt.h> /* needed for in_interrupt() proto */ +#include <linux/dma-mapping.h> #include <asm/io.h> #ifdef CONFIG_MTRR #include <asm/mtrr.h> @@ -218,41 +177,35 @@ static void mpt_fc_log_info(MPT_ADAPTER *ioc, u32 log_info); static void mpt_sp_log_info(MPT_ADAPTER *ioc, u32 log_info); /* module entry point */ -static int __devinit mptbase_probe (struct pci_dev *, const struct pci_device_id *); -static void __devexit mptbase_remove(struct pci_dev *); -static void mptbase_shutdown(struct device * ); static int __init fusion_init (void); static void __exit fusion_exit (void); -/**************************************************************************** - * Supported hardware - */ - -static struct pci_device_id mptbase_pci_table[] = { - { PCI_VENDOR_ID_LSI_LOGIC, PCI_DEVICE_ID_LSI_FC909, - PCI_ANY_ID, PCI_ANY_ID }, - { PCI_VENDOR_ID_LSI_LOGIC, PCI_DEVICE_ID_LSI_FC929, - PCI_ANY_ID, PCI_ANY_ID }, - { PCI_VENDOR_ID_LSI_LOGIC, PCI_DEVICE_ID_LSI_FC919, - PCI_ANY_ID, PCI_ANY_ID }, - { PCI_VENDOR_ID_LSI_LOGIC, PCI_DEVICE_ID_LSI_FC929X, - PCI_ANY_ID, PCI_ANY_ID }, - { PCI_VENDOR_ID_LSI_LOGIC, PCI_DEVICE_ID_LSI_FC919X, - PCI_ANY_ID, PCI_ANY_ID }, - { PCI_VENDOR_ID_LSI_LOGIC, PCI_DEVICE_ID_LSI_53C1030, - PCI_ANY_ID, PCI_ANY_ID }, - { PCI_VENDOR_ID_LSI_LOGIC, PCI_DEVICE_ID_LSI_1030_53C1035, - PCI_ANY_ID, PCI_ANY_ID }, - {0} /* Terminating entry */ -}; -MODULE_DEVICE_TABLE(pci, mptbase_pci_table); - #define CHIPREG_READ32(addr) readl_relaxed(addr) #define CHIPREG_READ32_dmasync(addr) readl(addr) #define CHIPREG_WRITE32(addr,val) writel(val, addr) #define CHIPREG_PIO_WRITE32(addr,val) outl(val, (unsigned long)addr) #define CHIPREG_PIO_READ32(addr) inl((unsigned long)addr) +static void +pci_disable_io_access(struct pci_dev *pdev) +{ + u16 command_reg; + + pci_read_config_word(pdev, PCI_COMMAND, &command_reg); + command_reg &= ~1; + pci_write_config_word(pdev, PCI_COMMAND, command_reg); +} + +static void +pci_enable_io_access(struct pci_dev *pdev) +{ + u16 command_reg; + + pci_read_config_word(pdev, PCI_COMMAND, &command_reg); + command_reg |= 1; + pci_write_config_word(pdev, PCI_COMMAND, command_reg); +} + /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ /* * mpt_interrupt - MPT adapter (IOC) specific interrupt handler. @@ -330,8 +283,7 @@ mpt_interrupt(int irq, void *bus_id, struct pt_regs *r) ioc->name, mr, req_idx)); DBG_DUMP_REPLY_FRAME(mr) - /* NEW! 20010301 -sralston - * Check/log IOC log info + /* Check/log IOC log info */ ioc_stat = le16_to_cpu(mr->u.reply.IOCStatus); if (ioc_stat & MPI_IOCSTATUS_FLAG_LOG_INFO_AVAILABLE) { @@ -357,9 +309,7 @@ mpt_interrupt(int irq, void *bus_id, struct pt_regs *r) mr = (MPT_FRAME_HDR *) CAST_U32_TO_PTR(pa); } else if (type == MPI_CONTEXT_REPLY_TYPE_LAN) { cb_idx = mpt_lan_index; - /* - * BUG FIX! 20001218 -sralston - * Blind set of mf to NULL here was fatal + /* Blind set of mf to NULL here was fatal * after lan_reply says "freeme" * Fix sort of combined with an optimization here; * added explicit check for case where lan_reply @@ -430,15 +380,8 @@ mpt_interrupt(int irq, void *bus_id, struct pt_regs *r) } if (freeme) { - unsigned long flags; - /* Put Request back on FreeQ! */ - spin_lock_irqsave(&ioc->FreeQlock, flags); - list_add_tail(&mf->u.frame.linkage.list, &ioc->FreeQ); -#ifdef MFCNT - ioc->mfcnt--; -#endif - spin_unlock_irqrestore(&ioc->FreeQlock, flags); + mpt_free_msg_frame(ioc, mf); } mb(); @@ -725,11 +668,9 @@ int mpt_device_driver_register(struct mpt_pci_driver * dd_cbfunc, int cb_idx) { MPT_ADAPTER *ioc; - int error=0; if (cb_idx < 1 || cb_idx >= MPT_MAX_PROTOCOL_DRIVERS) { - error= -EINVAL; - return error; + return -EINVAL; } MptDeviceDriverHandlers[cb_idx] = dd_cbfunc; @@ -737,14 +678,12 @@ mpt_device_driver_register(struct mpt_pci_driver * dd_cbfunc, int cb_idx) /* call per pci device probe entry point */ list_for_each_entry(ioc, &ioc_list, list) { if(dd_cbfunc->probe) { - error = dd_cbfunc->probe(ioc->pcidev, + dd_cbfunc->probe(ioc->pcidev, ioc->pcidev->driver->id_table); - if(error != 0) - return error; } } - return error; + return 0; } /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ @@ -809,8 +748,8 @@ mpt_get_msg_frame(int handle, MPT_ADAPTER *ioc) mf->u.frame.hwhdr.msgctxu.fld.cb_idx = handle; /* byte */ req_offset = (u8 *)mf - (u8 *)ioc->req_frames; /* u16! */ - req_idx = cpu_to_le16(req_offset / ioc->req_sz); - mf->u.frame.hwhdr.msgctxu.fld.req_idx = req_idx; + req_idx = req_offset / ioc->req_sz; + mf->u.frame.hwhdr.msgctxu.fld.req_idx = cpu_to_le16(req_idx); mf->u.frame.hwhdr.msgctxu.fld.rsvd = 0; ioc->RequestNB[req_idx] = ioc->NB_for_64_byte_frame; /* Default, will be changed if necessary in SG generation */ #ifdef MFCNT @@ -856,8 +795,8 @@ mpt_put_msg_frame(int handle, MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf) mf->u.frame.hwhdr.msgctxu.fld.cb_idx = handle; /* byte */ req_offset = (u8 *)mf - (u8 *)ioc->req_frames; /* u16! */ - req_idx = cpu_to_le16(req_offset / ioc->req_sz); - mf->u.frame.hwhdr.msgctxu.fld.req_idx = req_idx; + req_idx = req_offset / ioc->req_sz; + mf->u.frame.hwhdr.msgctxu.fld.req_idx = cpu_to_le16(req_idx); mf->u.frame.hwhdr.msgctxu.fld.rsvd = 0; #ifdef MPT_DEBUG_MSG_FRAME @@ -1058,7 +997,7 @@ mpt_verify_adapter(int iocid, MPT_ADAPTER **iocpp) /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ /* - * mptbase_probe - Install a PCI intelligent MPT adapter. + * mpt_attach - Install a PCI intelligent MPT adapter. * @pdev: Pointer to pci_dev structure * * This routine performs all the steps necessary to bring the IOC of @@ -1073,8 +1012,8 @@ mpt_verify_adapter(int iocid, MPT_ADAPTER **iocpp) * * TODO: Add support for polled controllers */ -static int __devinit -mptbase_probe(struct pci_dev *pdev, const struct pci_device_id *id) +int +mpt_attach(struct pci_dev *pdev, const struct pci_device_id *id) { MPT_ADAPTER *ioc; u8 __iomem *mem; @@ -1084,7 +1023,6 @@ mptbase_probe(struct pci_dev *pdev, const struct pci_device_id *id) u32 psize; int ii; int r = -ENODEV; - u64 mask = 0xffffffffffffffffULL; u8 revision; u8 pcixcmd; static int mpt_ids = 0; @@ -1097,15 +1035,15 @@ mptbase_probe(struct pci_dev *pdev, const struct pci_device_id *id) dinitprintk((KERN_WARNING MYNAM ": mpt_adapter_install\n")); - if (!pci_set_dma_mask(pdev, mask)) { + if (!pci_set_dma_mask(pdev, DMA_64BIT_MASK)) { dprintk((KERN_INFO MYNAM ": 64 BIT PCI BUS DMA ADDRESSING SUPPORTED\n")); - } else if (pci_set_dma_mask(pdev, (u64) 0xffffffff)) { + } else if (pci_set_dma_mask(pdev, DMA_32BIT_MASK)) { printk(KERN_WARNING MYNAM ": 32 BIT PCI BUS DMA ADDRESSING NOT SUPPORTED\n"); return r; } - if (!pci_set_consistent_dma_mask(pdev, mask)) + if (!pci_set_consistent_dma_mask(pdev, DMA_64BIT_MASK)) dprintk((KERN_INFO MYNAM ": Using 64 bit consistent mask\n")); else @@ -1243,6 +1181,16 @@ mptbase_probe(struct pci_dev *pdev, const struct pci_device_id *id) pcixcmd &= 0x8F; pci_write_config_byte(pdev, 0x6a, pcixcmd); } + else if (pdev->device == MPI_MANUFACTPAGE_DEVICEID_FC939X) { + ioc->prod_name = "LSIFC939X"; + ioc->bus_type = FC; + ioc->errata_flag_1064 = 1; + } + else if (pdev->device == MPI_MANUFACTPAGE_DEVICEID_FC949X) { + ioc->prod_name = "LSIFC949X"; + ioc->bus_type = FC; + ioc->errata_flag_1064 = 1; + } else if (pdev->device == MPI_MANUFACTPAGE_DEVID_53C1030) { ioc->prod_name = "LSI53C1030"; ioc->bus_type = SCSI; @@ -1261,6 +1209,9 @@ mptbase_probe(struct pci_dev *pdev, const struct pci_device_id *id) ioc->bus_type = SCSI; } + if (ioc->errata_flag_1064) + pci_disable_io_access(pdev); + sprintf(ioc->name, "ioc%d", ioc->id); spin_lock_init(&ioc->FreeQlock); @@ -1303,8 +1254,7 @@ mptbase_probe(struct pci_dev *pdev, const struct pci_device_id *id) #endif } - /* NEW! 20010220 -sralston - * Check for "bound ports" (929, 929X, 1030, 1035) to reduce redundant resets. + /* Check for "bound ports" (929, 929X, 1030, 1035) to reduce redundant resets. */ mpt_detect_bound_ports(ioc, pdev); @@ -1354,13 +1304,13 @@ mptbase_probe(struct pci_dev *pdev, const struct pci_device_id *id) /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ /* - * mptbase_remove - Remove a PCI intelligent MPT adapter. + * mpt_detach - Remove a PCI intelligent MPT adapter. * @pdev: Pointer to pci_dev structure * */ -static void __devexit -mptbase_remove(struct pci_dev *pdev) +void +mpt_detach(struct pci_dev *pdev) { MPT_ADAPTER *ioc = pci_get_drvdata(pdev); char pname[32]; @@ -1397,43 +1347,21 @@ mptbase_remove(struct pci_dev *pdev) pci_set_drvdata(pdev, NULL); } -/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ -/* - * mptbase_shutdown - - * - */ -static void -mptbase_shutdown(struct device * dev) -{ - int ii; - - /* call per device driver shutdown entry point */ - for(ii=0; ii<MPT_MAX_PROTOCOL_DRIVERS; ii++) { - if(MptDeviceDriverHandlers[ii] && - MptDeviceDriverHandlers[ii]->shutdown) { - MptDeviceDriverHandlers[ii]->shutdown(dev); - } - } - -} - - /************************************************************************** * Power Management */ #ifdef CONFIG_PM /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ /* - * mptbase_suspend - Fusion MPT base driver suspend routine. + * mpt_suspend - Fusion MPT base driver suspend routine. * * */ -static int -mptbase_suspend(struct pci_dev *pdev, pm_message_t state) +int +mpt_suspend(struct pci_dev *pdev, pm_message_t state) { u32 device_state; MPT_ADAPTER *ioc = pci_get_drvdata(pdev); - int ii; switch(state) { @@ -1453,14 +1381,6 @@ mptbase_suspend(struct pci_dev *pdev, pm_message_t state) "pci-suspend: pdev=0x%p, slot=%s, Entering operating state [D%d]\n", ioc->name, pdev, pci_name(pdev), device_state); - /* call per device driver suspend entry point */ - for(ii=0; ii<MPT_MAX_PROTOCOL_DRIVERS; ii++) { - if(MptDeviceDriverHandlers[ii] && - MptDeviceDriverHandlers[ii]->suspend) { - MptDeviceDriverHandlers[ii]->suspend(pdev, state); - } - } - pci_save_state(pdev); /* put ioc into READY_STATE */ @@ -1484,18 +1404,18 @@ mptbase_suspend(struct pci_dev *pdev, pm_message_t state) /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ /* - * mptbase_resume - Fusion MPT base driver resume routine. + * mpt_resume - Fusion MPT base driver resume routine. * * */ -static int -mptbase_resume(struct pci_dev *pdev) +int +mpt_resume(struct pci_dev *pdev) { MPT_ADAPTER *ioc = pci_get_drvdata(pdev); u32 device_state = pdev->current_state; int recovery_state; int ii; - + printk(MYIOC_s_INFO_FMT "pci-resume: pdev=0x%p, slot=%s, Previous operating state [D%d]\n", ioc->name, pdev, pci_name(pdev), device_state); @@ -1533,14 +1453,6 @@ mptbase_resume(struct pci_dev *pdev) "pci-resume: success\n", ioc->name); } - /* call per device driver resume entry point */ - for(ii=0; ii<MPT_MAX_PROTOCOL_DRIVERS; ii++) { - if(MptDeviceDriverHandlers[ii] && - MptDeviceDriverHandlers[ii]->resume) { - MptDeviceDriverHandlers[ii]->resume(pdev); - } - } - return 0; } #endif @@ -1719,8 +1631,7 @@ mpt_do_ioc_recovery(MPT_ADAPTER *ioc, u32 reason, int sleepFlag) ioc->alt_ioc->active = 1; } - /* NEW! 20010120 -sralston - * Enable MPT base driver management of EventNotification + /* Enable MPT base driver management of EventNotification * and EventAck handling. */ if ((ret == 0) && (!ioc->facts.EventState)) @@ -1729,9 +1640,7 @@ mpt_do_ioc_recovery(MPT_ADAPTER *ioc, u32 reason, int sleepFlag) if (ioc->alt_ioc && alt_ioc_ready && !ioc->alt_ioc->facts.EventState) (void) SendEventNotification(ioc->alt_ioc, 1); /* 1=Enable EventNotification */ - /* (Bugzilla:fibrebugs, #513) - * Bug fix (part 2)! 20010905 -sralston - * Add additional "reason" check before call to GetLanConfigPages + /* Add additional "reason" check before call to GetLanConfigPages * (combined with GetIoUnitPage2 call). This prevents a somewhat * recursive scenario; GetLanConfigPages times out, timer expired * routine calls HardResetHandler, which calls into here again, @@ -1829,37 +1738,43 @@ mpt_do_ioc_recovery(MPT_ADAPTER *ioc, u32 reason, int sleepFlag) static void mpt_detect_bound_ports(MPT_ADAPTER *ioc, struct pci_dev *pdev) { - unsigned int match_lo, match_hi; + struct pci_dev *peer=NULL; + unsigned int slot = PCI_SLOT(pdev->devfn); + unsigned int func = PCI_FUNC(pdev->devfn); MPT_ADAPTER *ioc_srch; - match_lo = pdev->devfn-1; - match_hi = pdev->devfn+1; - dprintk((MYIOC_s_INFO_FMT "PCI bus/devfn=%x/%x, searching for devfn match on %x or %x\n", - ioc->name, pdev->bus->number, pdev->devfn, match_lo, match_hi)); + dprintk((MYIOC_s_INFO_FMT "PCI device %s devfn=%x/%x," + " searching for devfn match on %x or %x\n", + ioc->name, pci_name(pdev), pdev->devfn, + func-1, func+1)); + + peer = pci_get_slot(pdev->bus, PCI_DEVFN(slot,func-1)); + if (!peer) { + peer = pci_get_slot(pdev->bus, PCI_DEVFN(slot,func+1)); + if (!peer) + return; + } list_for_each_entry(ioc_srch, &ioc_list, list) { struct pci_dev *_pcidev = ioc_srch->pcidev; - - if ((_pcidev->device == pdev->device) && - (_pcidev->bus->number == pdev->bus->number) && - (_pcidev->devfn == match_lo || _pcidev->devfn == match_hi) ) { + if (_pcidev == peer) { /* Paranoia checks */ if (ioc->alt_ioc != NULL) { printk(KERN_WARNING MYNAM ": Oops, already bound (%s <==> %s)!\n", - ioc->name, ioc->alt_ioc->name); + ioc->name, ioc->alt_ioc->name); break; } else if (ioc_srch->alt_ioc != NULL) { printk(KERN_WARNING MYNAM ": Oops, already bound (%s <==> %s)!\n", - ioc_srch->name, ioc_srch->alt_ioc->name); + ioc_srch->name, ioc_srch->alt_ioc->name); break; } dprintk((KERN_INFO MYNAM ": FOUND! binding %s <==> %s\n", - ioc->name, ioc_srch->name)); + ioc->name, ioc_srch->name)); ioc_srch->alt_ioc = ioc; ioc->alt_ioc = ioc_srch; - break; } } + pci_dev_put(peer); } /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ @@ -1922,15 +1837,10 @@ mpt_adapter_disable(MPT_ADAPTER *ioc) ioc->alloc_total -= sz; } - if (ioc->spi_data.nvram != NULL) { - kfree(ioc->spi_data.nvram); - ioc->spi_data.nvram = NULL; - } - - if (ioc->spi_data.pIocPg3 != NULL) { - kfree(ioc->spi_data.pIocPg3); - ioc->spi_data.pIocPg3 = NULL; - } + kfree(ioc->spi_data.nvram); + kfree(ioc->spi_data.pIocPg3); + ioc->spi_data.nvram = NULL; + ioc->spi_data.pIocPg3 = NULL; if (ioc->spi_data.pIocPg4 != NULL) { sz = ioc->spi_data.IocPg4Sz; @@ -1947,10 +1857,8 @@ mpt_adapter_disable(MPT_ADAPTER *ioc) ioc->ReqToChain = NULL; } - if (ioc->ChainToChain != NULL) { - kfree(ioc->ChainToChain); - ioc->ChainToChain = NULL; - } + kfree(ioc->ChainToChain); + ioc->ChainToChain = NULL; } /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ @@ -2333,7 +2241,7 @@ GetIocFacts(MPT_ADAPTER *ioc, int sleepFlag, int reason) return -55; } - r = sz = le32_to_cpu(facts->BlockSize); + r = sz = facts->BlockSize; vv = ((63 / (sz * 4)) + 1) & 0x03; ioc->NB_for_64_byte_frame = vv; while ( sz ) @@ -2785,7 +2693,7 @@ mpt_downloadboot(MPT_ADAPTER *ioc, int sleepFlag) /* prevent a second downloadboot and memory free with alt_ioc */ if (ioc->alt_ioc && ioc->alt_ioc->cached_fw) ioc->alt_ioc->cached_fw = NULL; - + CHIPREG_WRITE32(&ioc->chip->WriteSequence, 0xFF); CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_1ST_KEY_VALUE); CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_2ND_KEY_VALUE); @@ -2843,6 +2751,9 @@ mpt_downloadboot(MPT_ADAPTER *ioc, int sleepFlag) /* Write the LoadStartAddress to the DiagRw Address Register * using Programmed IO */ + if (ioc->errata_flag_1064) + pci_enable_io_access(ioc->pcidev); + CHIPREG_PIO_WRITE32(&ioc->pio_chip->DiagRwAddress, pFwHeader->LoadStartAddress); ddlprintk((MYIOC_s_INFO_FMT "LoadStart addr written 0x%x \n", ioc->name, pFwHeader->LoadStartAddress)); @@ -2889,6 +2800,9 @@ mpt_downloadboot(MPT_ADAPTER *ioc, int sleepFlag) CHIPREG_PIO_WRITE32(&ioc->pio_chip->DiagRwAddress, 0x3F000000); CHIPREG_PIO_WRITE32(&ioc->pio_chip->DiagRwData, diagRwData); + if (ioc->errata_flag_1064) + pci_disable_io_access(ioc->pcidev); + diag0val = CHIPREG_READ32(&ioc->chip->Diagnostic); ddlprintk((MYIOC_s_INFO_FMT "downloadboot diag0val=%x, turning off PREVENT_IOC_BOOT, DISABLE_ARM\n", ioc->name, diag0val)); @@ -4250,7 +4164,7 @@ mpt_GetScsiPortSettings(MPT_ADAPTER *ioc, int portnum) if ((ioc->spi_data.busType == MPI_SCSIPORTPAGE0_PHY_SIGNAL_HVD) || (ioc->spi_data.busType == MPI_SCSIPORTPAGE0_PHY_SIGNAL_SE)) { - if (ioc->spi_data.minSyncFactor < MPT_ULTRA) + if (ioc->spi_data.minSyncFactor < MPT_ULTRA) ioc->spi_data.minSyncFactor = MPT_ULTRA; } } @@ -4482,10 +4396,8 @@ mpt_read_ioc_pg_3(MPT_ADAPTER *ioc) /* Free the old page */ - if (ioc->spi_data.pIocPg3) { - kfree(ioc->spi_data.pIocPg3); - ioc->spi_data.pIocPg3 = NULL; - } + kfree(ioc->spi_data.pIocPg3); + ioc->spi_data.pIocPg3 = NULL; /* There is at least one physical disk. * Read and save IOC Page 3 @@ -4753,9 +4665,7 @@ mpt_config(MPT_ADAPTER *ioc, CONFIGPARMS *pCfg) u32 flagsLength; int in_isr; - /* (Bugzilla:fibrebugs, #513) - * Bug fix (part 1)! 20010905 -sralston - * Prevent calling wait_event() (below), if caller happens + /* Prevent calling wait_event() (below), if caller happens * to be in ISR context, because that is fatal! */ in_isr = in_interrupt(); @@ -4861,9 +4771,7 @@ mpt_toolbox(MPT_ADAPTER *ioc, CONFIGPARMS *pCfg) u32 flagsLength; int in_isr; - /* (Bugzilla:fibrebugs, #513) - * Bug fix (part 1)! 20010905 -sralston - * Prevent calling wait_event() (below), if caller happens + /* Prevent calling wait_event() (below), if caller happens * to be in ISR context, because that is fatal! */ in_isr = in_interrupt(); @@ -5130,20 +5038,26 @@ static int procmpt_version_read(char *buf, char **start, off_t offset, int request, int *eof, void *data) { int ii; - int scsi, lan, ctl, targ, dmp; + int scsi, fc, sas, lan, ctl, targ, dmp; char *drvname; int len; len = sprintf(buf, "%s-%s\n", "mptlinux", MPT_LINUX_VERSION_COMMON); len += sprintf(buf+len, " Fusion MPT base driver\n"); - scsi = lan = ctl = targ = dmp = 0; + scsi = fc = sas = lan = ctl = targ = dmp = 0; for (ii=MPT_MAX_PROTOCOL_DRIVERS-1; ii; ii--) { drvname = NULL; if (MptCallbacks[ii]) { switch (MptDriverClass[ii]) { - case MPTSCSIH_DRIVER: - if (!scsi++) drvname = "SCSI host"; + case MPTSPI_DRIVER: + if (!scsi++) drvname = "SPI host"; + break; + case MPTFC_DRIVER: + if (!fc++) drvname = "FC host"; + break; + case MPTSAS_DRIVER: + if (!sas++) drvname = "SAS host"; break; case MPTLAN_DRIVER: if (!lan++) drvname = "LAN"; @@ -5832,6 +5746,12 @@ mpt_sp_ioc_info(MPT_ADAPTER *ioc, u32 ioc_status, MPT_FRAME_HDR *mf) } /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ +EXPORT_SYMBOL(mpt_attach); +EXPORT_SYMBOL(mpt_detach); +#ifdef CONFIG_PM +EXPORT_SYMBOL(mpt_resume); +EXPORT_SYMBOL(mpt_suspend); +#endif EXPORT_SYMBOL(ioc_list); EXPORT_SYMBOL(mpt_proc_root_dir); EXPORT_SYMBOL(mpt_register); @@ -5860,19 +5780,6 @@ EXPORT_SYMBOL(mpt_read_ioc_pg_3); EXPORT_SYMBOL(mpt_alloc_fw_memory); EXPORT_SYMBOL(mpt_free_fw_memory); -static struct pci_driver mptbase_driver = { - .name = "mptbase", - .id_table = mptbase_pci_table, - .probe = mptbase_probe, - .remove = __devexit_p(mptbase_remove), - .driver = { - .shutdown = mptbase_shutdown, - }, -#ifdef CONFIG_PM - .suspend = mptbase_suspend, - .resume = mptbase_resume, -#endif -}; /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ /* @@ -5884,7 +5791,6 @@ static int __init fusion_init(void) { int i; - int r; show_mptmod_ver(my_NAME, my_VERSION); printk(KERN_INFO COPYRIGHT "\n"); @@ -5896,8 +5802,7 @@ fusion_init(void) MptResetHandlers[i] = NULL; } - /* NEW! 20010120 -sralston - * Register ourselves (mptbase) in order to facilitate + /* Register ourselves (mptbase) in order to facilitate * EventNotification handling. */ mpt_base_index = mpt_register(mpt_base_reply, MPTBASE_DRIVER); @@ -5913,11 +5818,7 @@ fusion_init(void) #ifdef CONFIG_PROC_FS (void) procmpt_create(); #endif - r = pci_register_driver(&mptbase_driver); - if(r) - return(r); - - return r; + return 0; } /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ @@ -5933,7 +5834,6 @@ fusion_exit(void) dexitprintk((KERN_INFO MYNAM ": fusion_exit() called!\n")); - pci_unregister_driver(&mptbase_driver); mpt_reset_deregister(mpt_base_index); #ifdef CONFIG_PROC_FS @@ -5941,6 +5841,5 @@ fusion_exit(void) #endif } - module_init(fusion_init); module_exit(fusion_exit); diff --git a/drivers/message/fusion/mptbase.h b/drivers/message/fusion/mptbase.h index 6d16acc7a17..848fb236b17 100644 --- a/drivers/message/fusion/mptbase.h +++ b/drivers/message/fusion/mptbase.h @@ -5,15 +5,9 @@ * LSIFC9xx/LSI409xx Fibre Channel * running LSI Logic Fusion MPT (Message Passing Technology) firmware. * - * Credits: - * (see mptbase.c) - * - * Copyright (c) 1999-2004 LSI Logic Corporation - * Originally By: Steven J. Ralston - * (mailto:sjralston1@netscape.net) + * Copyright (c) 1999-2005 LSI Logic Corporation * (mailto:mpt_linux_developer@lsil.com) * - * $Id: mptbase.h,v 1.144 2003/01/28 21:31:56 pdelaney Exp $ */ /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ /* @@ -71,7 +65,6 @@ #include "lsi/mpi_fc.h" /* Fibre Channel (lowlevel) support */ #include "lsi/mpi_targ.h" /* SCSI/FCP Target protcol support */ #include "lsi/mpi_tool.h" /* Tools support */ -#include "lsi/fc_log.h" /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ @@ -80,11 +73,11 @@ #endif #ifndef COPYRIGHT -#define COPYRIGHT "Copyright (c) 1999-2004 " MODULEAUTHOR +#define COPYRIGHT "Copyright (c) 1999-2005 " MODULEAUTHOR #endif -#define MPT_LINUX_VERSION_COMMON "3.01.20" -#define MPT_LINUX_PACKAGE_NAME "@(#)mptlinux-3.01.20" +#define MPT_LINUX_VERSION_COMMON "3.03.02" +#define MPT_LINUX_PACKAGE_NAME "@(#)mptlinux-3.03.02" #define WHAT_MAGIC_STRING "@" "(" "#" ")" #define show_mptmod_ver(s,ver) \ @@ -203,7 +196,9 @@ typedef enum { MPTBASE_DRIVER, /* MPT base class */ MPTCTL_DRIVER, /* MPT ioctl class */ - MPTSCSIH_DRIVER, /* MPT SCSI host (initiator) class */ + MPTSPI_DRIVER, /* MPT SPI host class */ + MPTFC_DRIVER, /* MPT FC host class */ + MPTSAS_DRIVER, /* MPT SAS host class */ MPTLAN_DRIVER, /* MPT LAN class */ MPTSTM_DRIVER, /* MPT SCSI target mode class */ MPTUNKNOWN_DRIVER @@ -212,11 +207,6 @@ typedef enum { struct mpt_pci_driver{ int (*probe) (struct pci_dev *dev, const struct pci_device_id *id); void (*remove) (struct pci_dev *dev); - void (*shutdown) (struct device * dev); -#ifdef CONFIG_PM - int (*resume) (struct pci_dev *dev); - int (*suspend) (struct pci_dev *dev, pm_message_t state); -#endif }; /* @@ -483,6 +473,7 @@ typedef struct _ScsiCfgData { u8 forceDv; /* 1 to force DV scheduling */ u8 noQas; /* Disable QAS for this adapter */ u8 Saf_Te; /* 1 to force all Processors as SAF-TE if Inquiry data length is too short to check for SAF-TE */ + u8 mpt_dv; /* command line option: enhanced=1, basic=0 */ u8 rsvd[1]; } ScsiCfgData; @@ -571,11 +562,21 @@ typedef struct _MPT_ADAPTER FCPortPage0_t fc_port_page0[2]; LANPage0_t lan_cnfg_page0; LANPage1_t lan_cnfg_page1; + /* + * Description: errata_flag_1064 + * If a PCIX read occurs within 1 or 2 cycles after the chip receives + * a split completion for a read data, an internal address pointer incorrectly + * increments by 32 bytes + */ + int errata_flag_1064; u8 FirstWhoInit; u8 upload_fw; /* If set, do a fw upload */ u8 reload_fw; /* Force a FW Reload on next reset */ u8 NBShiftFactor; /* NB Shift Factor based on Block Size (Facts) */ u8 pad1[4]; + int DoneCtx; + int TaskCtx; + int InternalCtx; struct list_head list; struct net_device *netdev; } MPT_ADAPTER; @@ -773,12 +774,6 @@ typedef struct _mpt_sge { #define DBG_DUMP_TM_REPLY_FRAME(mfp) #endif -#ifdef MPT_DEBUG_NEH -#define nehprintk(x) printk x -#else -#define nehprintk(x) -#endif - #if defined(MPT_DEBUG_CONFIG) || defined(MPT_DEBUG) #define dcprintk(x) printk x #else @@ -898,6 +893,11 @@ typedef struct _MPT_SCSI_HOST { unsigned long soft_resets; /* fw/external bus resets count */ unsigned long timeouts; /* cmd timeouts */ ushort sel_timeout[MPT_MAX_FC_DEVICES]; + char *info_kbuf; + wait_queue_head_t scandv_waitq; + int scandv_wait_done; + long last_queue_full; + u8 mpt_pq_filter; } MPT_SCSI_HOST; /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ @@ -931,6 +931,12 @@ typedef struct _x_config_parms { /* * Public entry points... */ +extern int mpt_attach(struct pci_dev *pdev, const struct pci_device_id *id); +extern void mpt_detach(struct pci_dev *pdev); +#ifdef CONFIG_PM +extern int mpt_suspend(struct pci_dev *pdev, pm_message_t state); +extern int mpt_resume(struct pci_dev *pdev); +#endif extern int mpt_register(MPT_CALLBACK cbfunc, MPT_DRIVER_CLASS dclass); extern void mpt_deregister(int cb_idx); extern int mpt_event_register(int cb_idx, MPT_EVHANDLER ev_cbfunc); diff --git a/drivers/message/fusion/mptctl.c b/drivers/message/fusion/mptctl.c index 70b0cfb5ac5..05ea5944c48 100644 --- a/drivers/message/fusion/mptctl.c +++ b/drivers/message/fusion/mptctl.c @@ -1,40 +1,12 @@ /* * linux/drivers/message/fusion/mptctl.c - * Fusion MPT misc device (ioctl) driver. - * For use with PCI chip/adapter(s): - * LSIFC9xx/LSI409xx Fibre Channel + * mpt Ioctl driver. + * For use with LSI Logic PCI chip/adapters * running LSI Logic Fusion MPT (Message Passing Technology) firmware. * - * Credits: - * This driver would not exist if not for Alan Cox's development - * of the linux i2o driver. - * - * A special thanks to Pamela Delaney (LSI Logic) for tons of work - * and countless enhancements while adding support for the 1030 - * chip family. Pam has been instrumental in the development of - * of the 2.xx.xx series fusion drivers, and her contributions are - * far too numerous to hope to list in one place. - * - * A huge debt of gratitude is owed to David S. Miller (DaveM) - * for fixing much of the stupid and broken stuff in the early - * driver while porting to sparc64 platform. THANK YOU! - * - * A big THANKS to Eddie C. Dost for fixing the ioctl path - * and most importantly f/w download on sparc64 platform! - * (plus Eddie's other helpful hints and insights) - * - * Thanks to Arnaldo Carvalho de Melo for finding and patching - * a potential memory leak in mptctl_do_fw_download(), - * and for some kmalloc insight:-) - * - * (see also mptbase.c) - * - * Copyright (c) 1999-2004 LSI Logic Corporation - * Originally By: Steven J. Ralston, Noah Romer - * (mailto:sjralston1@netscape.net) + * Copyright (c) 1999-2005 LSI Logic Corporation * (mailto:mpt_linux_developer@lsil.com) * - * $Id: mptctl.c,v 1.63 2002/12/03 21:26:33 pdelaney Exp $ */ /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ /* @@ -95,8 +67,8 @@ #include <scsi/scsi_host.h> #include <scsi/scsi_tcq.h> -#define COPYRIGHT "Copyright (c) 1999-2004 LSI Logic Corporation" -#define MODULEAUTHOR "Steven J. Ralston, Noah Romer, Pamela Delaney" +#define COPYRIGHT "Copyright (c) 1999-2005 LSI Logic Corporation" +#define MODULEAUTHOR "LSI Logic Corporation" #include "mptbase.h" #include "mptctl.h" @@ -127,14 +99,14 @@ struct buflist { * arg contents specific to function. */ static int mptctl_fw_download(unsigned long arg); -static int mptctl_getiocinfo (unsigned long arg, unsigned int cmd); -static int mptctl_gettargetinfo (unsigned long arg); -static int mptctl_readtest (unsigned long arg); -static int mptctl_mpt_command (unsigned long arg); -static int mptctl_eventquery (unsigned long arg); -static int mptctl_eventenable (unsigned long arg); -static int mptctl_eventreport (unsigned long arg); -static int mptctl_replace_fw (unsigned long arg); +static int mptctl_getiocinfo(unsigned long arg, unsigned int cmd); +static int mptctl_gettargetinfo(unsigned long arg); +static int mptctl_readtest(unsigned long arg); +static int mptctl_mpt_command(unsigned long arg); +static int mptctl_eventquery(unsigned long arg); +static int mptctl_eventenable(unsigned long arg); +static int mptctl_eventreport(unsigned long arg); +static int mptctl_replace_fw(unsigned long arg); static int mptctl_do_reset(unsigned long arg); static int mptctl_hp_hostinfo(unsigned long arg, unsigned int cmd); @@ -149,11 +121,11 @@ static long compat_mpctl_ioctl(struct file *f, unsigned cmd, unsigned long arg); /* * Private function calls. */ -static int mptctl_do_mpt_command (struct mpt_ioctl_command karg, void __user *mfPtr); +static int mptctl_do_mpt_command(struct mpt_ioctl_command karg, void __user *mfPtr); static int mptctl_do_fw_download(int ioc, char __user *ufwbuf, size_t fwlen); -static MptSge_t *kbuf_alloc_2_sgl( int bytes, u32 dir, int sge_offset, int *frags, +static MptSge_t *kbuf_alloc_2_sgl(int bytes, u32 dir, int sge_offset, int *frags, struct buflist **blp, dma_addr_t *sglbuf_dma, MPT_ADAPTER *ioc); -static void kfree_sgl( MptSge_t *sgl, dma_addr_t sgl_dma, +static void kfree_sgl(MptSge_t *sgl, dma_addr_t sgl_dma, struct buflist *buflist, MPT_ADAPTER *ioc); static void mptctl_timeout_expired (MPT_IOCTL *ioctl); static int mptctl_bus_reset(MPT_IOCTL *ioctl); @@ -1119,7 +1091,7 @@ mptctl_getiocinfo (unsigned long arg, unsigned int data_size) int numDevices = 0; unsigned int max_id; int ii; - int port; + unsigned int port; int cim_rev; u8 revision; @@ -1162,9 +1134,7 @@ mptctl_getiocinfo (unsigned long arg, unsigned int data_size) return -ENODEV; } - /* Verify the data transfer size is correct. - * Ignore the port setting. - */ + /* Verify the data transfer size is correct. */ if (karg->hdr.maxDataSize != data_size) { printk(KERN_ERR "%s@%d::mptctl_getiocinfo - " "Structure size mismatch. Command not completed.\n", @@ -1181,6 +1151,8 @@ mptctl_getiocinfo (unsigned long arg, unsigned int data_size) else karg->adapterType = MPT_IOCTL_INTERFACE_SCSI; + if (karg->hdr.port > 1) + return -EINVAL; port = karg->hdr.port; karg->port = port; diff --git a/drivers/message/fusion/mptctl.h b/drivers/message/fusion/mptctl.h index cc4ecf0382d..28754a9cb80 100644 --- a/drivers/message/fusion/mptctl.h +++ b/drivers/message/fusion/mptctl.h @@ -5,22 +5,9 @@ * LSIFC9xx/LSI409xx Fibre Channel * running LSI Logic Fusion MPT (Message Passing Technology) firmware. * - * Credits: - * This driver would not exist if not for Alan Cox's development - * of the linux i2o driver. - * - * A huge debt of gratitude is owed to David S. Miller (DaveM) - * for fixing much of the stupid and broken stuff in the early - * driver while porting to sparc64 platform. THANK YOU! - * - * (see also mptbase.c) - * - * Copyright (c) 1999-2004 LSI Logic Corporation - * Originally By: Steven J. Ralston - * (mailto:sjralston1@netscape.net) + * Copyright (c) 1999-2005 LSI Logic Corporation * (mailto:mpt_linux_developer@lsil.com) * - * $Id: mptctl.h,v 1.13 2002/12/03 21:26:33 pdelaney Exp $ */ /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ /* diff --git a/drivers/message/fusion/mptfc.c b/drivers/message/fusion/mptfc.c new file mode 100644 index 00000000000..d8d65397e06 --- /dev/null +++ b/drivers/message/fusion/mptfc.c @@ -0,0 +1,431 @@ +/* + * linux/drivers/message/fusion/mptfc.c + * For use with LSI Logic PCI chip/adapter(s) + * running LSI Logic Fusion MPT (Message Passing Technology) firmware. + * + * Copyright (c) 1999-2005 LSI Logic Corporation + * (mailto:mpt_linux_developer@lsil.com) + * + */ +/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ +/* + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; version 2 of the License. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + NO WARRANTY + THE PROGRAM IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OR + CONDITIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED INCLUDING, WITHOUT + LIMITATION, ANY WARRANTIES OR CONDITIONS OF TITLE, NON-INFRINGEMENT, + MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Each Recipient is + solely responsible for determining the appropriateness of using and + distributing the Program and assumes all risks associated with its + exercise of rights under this Agreement, including but not limited to + the risks and costs of program errors, damage to or loss of data, + programs or equipment, and unavailability or interruption of operations. + + DISCLAIMER OF LIABILITY + NEITHER RECIPIENT NOR ANY CONTRIBUTORS SHALL HAVE ANY LIABILITY FOR ANY + DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + DAMAGES (INCLUDING WITHOUT LIMITATION LOST PROFITS), HOWEVER CAUSED AND + ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR + TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE + USE OR DISTRIBUTION OF THE PROGRAM OR THE EXERCISE OF ANY RIGHTS GRANTED + HEREUNDER, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA +*/ +/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ +#include "linux_compat.h" /* linux-2.6 tweaks */ +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/errno.h> +#include <linux/kdev_t.h> +#include <linux/blkdev.h> +#include <linux/delay.h> /* for mdelay */ +#include <linux/interrupt.h> /* needed for in_interrupt() proto */ +#include <linux/reboot.h> /* notifier code */ +#include <linux/sched.h> +#include <linux/workqueue.h> + +#include <scsi/scsi.h> +#include <scsi/scsi_cmnd.h> +#include <scsi/scsi_device.h> +#include <scsi/scsi_host.h> +#include <scsi/scsi_tcq.h> + +#include "mptbase.h" +#include "mptscsih.h" + +/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ +#define my_NAME "Fusion MPT FC Host driver" +#define my_VERSION MPT_LINUX_VERSION_COMMON +#define MYNAM "mptfc" + +MODULE_AUTHOR(MODULEAUTHOR); +MODULE_DESCRIPTION(my_NAME); +MODULE_LICENSE("GPL"); + +/* Command line args */ +static int mpt_pq_filter = 0; +module_param(mpt_pq_filter, int, 0); +MODULE_PARM_DESC(mpt_pq_filter, " Enable peripheral qualifier filter: enable=1 (default=0)"); + +static int mptfcDoneCtx = -1; +static int mptfcTaskCtx = -1; +static int mptfcInternalCtx = -1; /* Used only for internal commands */ + +static struct device_attribute mptfc_queue_depth_attr = { + .attr = { + .name = "queue_depth", + .mode = S_IWUSR, + }, + .store = mptscsih_store_queue_depth, +}; + +static struct device_attribute *mptfc_dev_attrs[] = { + &mptfc_queue_depth_attr, + NULL, +}; + +static struct scsi_host_template mptfc_driver_template = { + .proc_name = "mptfc", + .proc_info = mptscsih_proc_info, + .name = "MPT FC Host", + .info = mptscsih_info, + .queuecommand = mptscsih_qcmd, + .slave_alloc = mptscsih_slave_alloc, + .slave_configure = mptscsih_slave_configure, + .slave_destroy = mptscsih_slave_destroy, + .eh_abort_handler = mptscsih_abort, + .eh_device_reset_handler = mptscsih_dev_reset, + .eh_bus_reset_handler = mptscsih_bus_reset, + .eh_host_reset_handler = mptscsih_host_reset, + .bios_param = mptscsih_bios_param, + .can_queue = MPT_FC_CAN_QUEUE, + .this_id = -1, + .sg_tablesize = MPT_SCSI_SG_DEPTH, + .max_sectors = 8192, + .cmd_per_lun = 7, + .use_clustering = ENABLE_CLUSTERING, + .sdev_attrs = mptfc_dev_attrs, +}; + +/**************************************************************************** + * Supported hardware + */ + +static struct pci_device_id mptfc_pci_table[] = { + { PCI_VENDOR_ID_LSI_LOGIC, PCI_DEVICE_ID_LSI_FC909, + PCI_ANY_ID, PCI_ANY_ID }, + { PCI_VENDOR_ID_LSI_LOGIC, PCI_DEVICE_ID_LSI_FC919, + PCI_ANY_ID, PCI_ANY_ID }, + { PCI_VENDOR_ID_LSI_LOGIC, PCI_DEVICE_ID_LSI_FC929, + PCI_ANY_ID, PCI_ANY_ID }, + { PCI_VENDOR_ID_LSI_LOGIC, PCI_DEVICE_ID_LSI_FC919X, + PCI_ANY_ID, PCI_ANY_ID }, + { PCI_VENDOR_ID_LSI_LOGIC, PCI_DEVICE_ID_LSI_FC929X, + PCI_ANY_ID, PCI_ANY_ID }, + { PCI_VENDOR_ID_LSI_LOGIC, PCI_DEVICE_ID_LSI_FC939X, + PCI_ANY_ID, PCI_ANY_ID }, + { PCI_VENDOR_ID_LSI_LOGIC, PCI_DEVICE_ID_LSI_FC949X, + PCI_ANY_ID, PCI_ANY_ID }, + {0} /* Terminating entry */ +}; +MODULE_DEVICE_TABLE(pci, mptfc_pci_table); + +/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ +/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ +/* + * mptfc_probe - Installs scsi devices per bus. + * @pdev: Pointer to pci_dev structure + * + * Returns 0 for success, non-zero for failure. + * + */ +static int +mptfc_probe(struct pci_dev *pdev, const struct pci_device_id *id) +{ + struct Scsi_Host *sh; + MPT_SCSI_HOST *hd; + MPT_ADAPTER *ioc; + unsigned long flags; + int sz, ii; + int numSGE = 0; + int scale; + int ioc_cap; + u8 *mem; + int error=0; + int r; + + if ((r = mpt_attach(pdev,id)) != 0) + return r; + + ioc = pci_get_drvdata(pdev); + ioc->DoneCtx = mptfcDoneCtx; + ioc->TaskCtx = mptfcTaskCtx; + ioc->InternalCtx = mptfcInternalCtx; + + /* Added sanity check on readiness of the MPT adapter. + */ + if (ioc->last_state != MPI_IOC_STATE_OPERATIONAL) { + printk(MYIOC_s_WARN_FMT + "Skipping because it's not operational!\n", + ioc->name); + return -ENODEV; + } + + if (!ioc->active) { + printk(MYIOC_s_WARN_FMT "Skipping because it's disabled!\n", + ioc->name); + return -ENODEV; + } + + /* Sanity check - ensure at least 1 port is INITIATOR capable + */ + ioc_cap = 0; + for (ii=0; ii < ioc->facts.NumberOfPorts; ii++) { + if (ioc->pfacts[ii].ProtocolFlags & + MPI_PORTFACTS_PROTOCOL_INITIATOR) + ioc_cap ++; + } + + if (!ioc_cap) { + printk(MYIOC_s_WARN_FMT + "Skipping ioc=%p because SCSI Initiator mode is NOT enabled!\n", + ioc->name, ioc); + return -ENODEV; + } + + sh = scsi_host_alloc(&mptfc_driver_template, sizeof(MPT_SCSI_HOST)); + + if (!sh) { + printk(MYIOC_s_WARN_FMT + "Unable to register controller with SCSI subsystem\n", + ioc->name); + return -1; + } + + spin_lock_irqsave(&ioc->FreeQlock, flags); + + /* Attach the SCSI Host to the IOC structure + */ + ioc->sh = sh; + + sh->io_port = 0; + sh->n_io_port = 0; + sh->irq = 0; + + /* set 16 byte cdb's */ + sh->max_cmd_len = 16; + + sh->max_id = MPT_MAX_FC_DEVICES<256 ? MPT_MAX_FC_DEVICES : 255; + + sh->max_lun = MPT_LAST_LUN + 1; + sh->max_channel = 0; + sh->this_id = ioc->pfacts[0].PortSCSIID; + + /* Required entry. + */ + sh->unique_id = ioc->id; + + /* Verify that we won't exceed the maximum + * number of chain buffers + * We can optimize: ZZ = req_sz/sizeof(SGE) + * For 32bit SGE's: + * numSGE = 1 + (ZZ-1)*(maxChain -1) + ZZ + * + (req_sz - 64)/sizeof(SGE) + * A slightly different algorithm is required for + * 64bit SGEs. + */ + scale = ioc->req_sz/(sizeof(dma_addr_t) + sizeof(u32)); + if (sizeof(dma_addr_t) == sizeof(u64)) { + numSGE = (scale - 1) * + (ioc->facts.MaxChainDepth-1) + scale + + (ioc->req_sz - 60) / (sizeof(dma_addr_t) + + sizeof(u32)); + } else { + numSGE = 1 + (scale - 1) * + (ioc->facts.MaxChainDepth-1) + scale + + (ioc->req_sz - 64) / (sizeof(dma_addr_t) + + sizeof(u32)); + } + + if (numSGE < sh->sg_tablesize) { + /* Reset this value */ + dprintk((MYIOC_s_INFO_FMT + "Resetting sg_tablesize to %d from %d\n", + ioc->name, numSGE, sh->sg_tablesize)); + sh->sg_tablesize = numSGE; + } + + /* Set the pci device pointer in Scsi_Host structure. + */ + scsi_set_device(sh, &ioc->pcidev->dev); + + spin_unlock_irqrestore(&ioc->FreeQlock, flags); + + hd = (MPT_SCSI_HOST *) sh->hostdata; + hd->ioc = ioc; + + /* SCSI needs scsi_cmnd lookup table! + * (with size equal to req_depth*PtrSz!) + */ + sz = ioc->req_depth * sizeof(void *); + mem = kmalloc(sz, GFP_ATOMIC); + if (mem == NULL) { + error = -ENOMEM; + goto mptfc_probe_failed; + } + + memset(mem, 0, sz); + hd->ScsiLookup = (struct scsi_cmnd **) mem; + + dprintk((MYIOC_s_INFO_FMT "ScsiLookup @ %p, sz=%d\n", + ioc->name, hd->ScsiLookup, sz)); + + /* Allocate memory for the device structures. + * A non-Null pointer at an offset + * indicates a device exists. + * max_id = 1 + maximum id (hosts.h) + */ + sz = sh->max_id * sizeof(void *); + mem = kmalloc(sz, GFP_ATOMIC); + if (mem == NULL) { + error = -ENOMEM; + goto mptfc_probe_failed; + } + + memset(mem, 0, sz); + hd->Targets = (VirtDevice **) mem; + + dprintk((KERN_INFO + " Targets @ %p, sz=%d\n", hd->Targets, sz)); + + /* Clear the TM flags + */ + hd->tmPending = 0; + hd->tmState = TM_STATE_NONE; + hd->resetPending = 0; + hd->abortSCpnt = NULL; + + /* Clear the pointer used to store + * single-threaded commands, i.e., those + * issued during a bus scan, dv and + * configuration pages. + */ + hd->cmdPtr = NULL; + + /* Initialize this SCSI Hosts' timers + * To use, set the timer expires field + * and add_timer + */ + init_timer(&hd->timer); + hd->timer.data = (unsigned long) hd; + hd->timer.function = mptscsih_timer_expired; + + hd->mpt_pq_filter = mpt_pq_filter; + + ddvprintk((MYIOC_s_INFO_FMT + "mpt_pq_filter %x\n", + ioc->name, + mpt_pq_filter)); + + init_waitqueue_head(&hd->scandv_waitq); + hd->scandv_wait_done = 0; + hd->last_queue_full = 0; + + error = scsi_add_host (sh, &ioc->pcidev->dev); + if(error) { + dprintk((KERN_ERR MYNAM + "scsi_add_host failed\n")); + goto mptfc_probe_failed; + } + + scsi_scan_host(sh); + return 0; + +mptfc_probe_failed: + + mptscsih_remove(pdev); + return error; +} + +static struct pci_driver mptfc_driver = { + .name = "mptfc", + .id_table = mptfc_pci_table, + .probe = mptfc_probe, + .remove = __devexit_p(mptscsih_remove), + .driver = { + .shutdown = mptscsih_shutdown, + }, +#ifdef CONFIG_PM + .suspend = mptscsih_suspend, + .resume = mptscsih_resume, +#endif +}; + +/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ +/** + * mptfc_init - Register MPT adapter(s) as SCSI host(s) with + * linux scsi mid-layer. + * + * Returns 0 for success, non-zero for failure. + */ +static int __init +mptfc_init(void) +{ + + show_mptmod_ver(my_NAME, my_VERSION); + + mptfcDoneCtx = mpt_register(mptscsih_io_done, MPTFC_DRIVER); + mptfcTaskCtx = mpt_register(mptscsih_taskmgmt_complete, MPTFC_DRIVER); + mptfcInternalCtx = mpt_register(mptscsih_scandv_complete, MPTFC_DRIVER); + + if (mpt_event_register(mptfcDoneCtx, mptscsih_event_process) == 0) { + devtprintk((KERN_INFO MYNAM + ": Registered for IOC event notifications\n")); + } + + if (mpt_reset_register(mptfcDoneCtx, mptscsih_ioc_reset) == 0) { + dprintk((KERN_INFO MYNAM + ": Registered for IOC reset notifications\n")); + } + + return pci_register_driver(&mptfc_driver); +} + +/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ +/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ +/** + * mptfc_exit - Unregisters MPT adapter(s) + * + */ +static void __exit +mptfc_exit(void) +{ + pci_unregister_driver(&mptfc_driver); + + mpt_reset_deregister(mptfcDoneCtx); + dprintk((KERN_INFO MYNAM + ": Deregistered for IOC reset notifications\n")); + + mpt_event_deregister(mptfcDoneCtx); + dprintk((KERN_INFO MYNAM + ": Deregistered for IOC event notifications\n")); + + mpt_deregister(mptfcInternalCtx); + mpt_deregister(mptfcTaskCtx); + mpt_deregister(mptfcDoneCtx); +} + +module_init(mptfc_init); +module_exit(mptfc_exit); diff --git a/drivers/message/fusion/mptlan.c b/drivers/message/fusion/mptlan.c index ef2713b93fa..52794be5a95 100644 --- a/drivers/message/fusion/mptlan.c +++ b/drivers/message/fusion/mptlan.c @@ -1,33 +1,11 @@ /* * linux/drivers/message/fusion/mptlan.c * IP Over Fibre Channel device driver. - * For use with PCI chip/adapter(s): - * LSIFC9xx/LSI409xx Fibre Channel + * For use with LSI Logic Fibre Channel PCI chip/adapters * running LSI Logic Fusion MPT (Message Passing Technology) firmware. * - * Credits: - * This driver would not exist if not for Alan Cox's development - * of the linux i2o driver. + * Copyright (c) 2000-2005 LSI Logic Corporation * - * Special thanks goes to the I2O LAN driver people at the - * University of Helsinki, who, unbeknownst to them, provided - * the inspiration and initial structure for this driver. - * - * A huge debt of gratitude is owed to David S. Miller (DaveM) - * for fixing much of the stupid and broken stuff in the early - * driver while porting to sparc64 platform. THANK YOU! - * - * A really huge debt of gratitude is owed to Eddie C. Dost - * for gobs of hard work fixing and optimizing LAN code. - * THANK YOU! - * - * (see also mptbase.c) - * - * Copyright (c) 2000-2004 LSI Logic Corporation - * Originally By: Noah Romer - * (mailto:mpt_linux_developer@lsil.com) - * - * $Id: mptlan.c,v 1.53 2002/10/17 20:15:58 pdelaney Exp $ */ /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ /* @@ -221,7 +199,7 @@ lan_reply (MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf, MPT_FRAME_HDR *reply) // NOTE! (Optimization) First case here is now caught in // mptbase.c::mpt_interrupt() routine and callcack here - // is now skipped for this case! 20001218 -sralston + // is now skipped for this case! #if 0 case LAN_REPLY_FORM_MESSAGE_CONTEXT: // dioprintk((KERN_INFO MYNAM "/lan_reply: " @@ -234,7 +212,7 @@ lan_reply (MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf, MPT_FRAME_HDR *reply) // dioprintk((MYNAM "/lan_reply: " // "calling mpt_lan_send_reply (turbo)\n")); - // Potential BUG here? -sralston + // Potential BUG here? // FreeReqFrame = mpt_lan_send_turbo(dev, tmsg); // If/when mpt_lan_send_turbo would return 1 here, // calling routine (mptbase.c|mpt_interrupt) @@ -310,8 +288,7 @@ lan_reply (MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf, MPT_FRAME_HDR *reply) case MPI_FUNCTION_EVENT_NOTIFICATION: case MPI_FUNCTION_EVENT_ACK: - /* UPDATE! 20010120 -sralston - * _EVENT_NOTIFICATION should NOT come down this path any more. + /* _EVENT_NOTIFICATION should NOT come down this path any more. * Should be routed to mpt_lan_event_process(), but just in case... */ FreeReqFrame = 1; @@ -561,8 +538,8 @@ mpt_lan_close(struct net_device *dev) } } - kfree (priv->RcvCtl); - kfree (priv->mpt_rxfidx); + kfree(priv->RcvCtl); + kfree(priv->mpt_rxfidx); for (i = 0; i < priv->tx_max_out; i++) { if (priv->SendCtl[i].skb != NULL) { diff --git a/drivers/message/fusion/mptlan.h b/drivers/message/fusion/mptlan.h index 057904260ab..750e343eb98 100644 --- a/drivers/message/fusion/mptlan.h +++ b/drivers/message/fusion/mptlan.h @@ -1,3 +1,49 @@ +/* + * linux/drivers/message/fusion/mptlan.h + * IP Over Fibre Channel device driver. + * For use with LSI Logic Fibre Channel PCI chip/adapters + * running LSI Logic Fusion MPT (Message Passing Technology) firmware. + * + * Copyright (c) 2000-2005 LSI Logic Corporation + * + */ +/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ +/* + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; version 2 of the License. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + NO WARRANTY + THE PROGRAM IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OR + CONDITIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED INCLUDING, WITHOUT + LIMITATION, ANY WARRANTIES OR CONDITIONS OF TITLE, NON-INFRINGEMENT, + MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Each Recipient is + solely responsible for determining the appropriateness of using and + distributing the Program and assumes all risks associated with its + exercise of rights under this Agreement, including but not limited to + the risks and costs of program errors, damage to or loss of data, + programs or equipment, and unavailability or interruption of operations. + + DISCLAIMER OF LIABILITY + NEITHER RECIPIENT NOR ANY CONTRIBUTORS SHALL HAVE ANY LIABILITY FOR ANY + DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + DAMAGES (INCLUDING WITHOUT LIMITATION LOST PROFITS), HOWEVER CAUSED AND + ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR + TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE + USE OR DISTRIBUTION OF THE PROGRAM OR THE EXERCISE OF ANY RIGHTS GRANTED + HEREUNDER, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA +*/ +/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ + /* mptlan.h */ #ifndef LINUX_MPTLAN_H_INCLUDED @@ -29,7 +75,7 @@ #include <asm/io.h> /* Override mptbase.h by pre-defining these! */ - #define MODULEAUTHOR "Noah Romer, Eddie C. Dost" +#define MODULEAUTHOR "LSI Logic Corporation" #include "mptbase.h" diff --git a/drivers/message/fusion/mptscsih.c b/drivers/message/fusion/mptscsih.c index 3a3ef127df0..48ff314cdfb 100644 --- a/drivers/message/fusion/mptscsih.c +++ b/drivers/message/fusion/mptscsih.c @@ -1,32 +1,11 @@ /* * linux/drivers/message/fusion/mptscsih.c - * High performance SCSI / Fibre Channel SCSI Host device driver. - * For use with PCI chip/adapter(s): - * LSIFC9xx/LSI409xx Fibre Channel + * For use with LSI Logic PCI chip/adapter(s) * running LSI Logic Fusion MPT (Message Passing Technology) firmware. * - * Credits: - * This driver would not exist if not for Alan Cox's development - * of the linux i2o driver. - * - * A special thanks to Pamela Delaney (LSI Logic) for tons of work - * and countless enhancements while adding support for the 1030 - * chip family. Pam has been instrumental in the development of - * of the 2.xx.xx series fusion drivers, and her contributions are - * far too numerous to hope to list in one place. - * - * A huge debt of gratitude is owed to David S. Miller (DaveM) - * for fixing much of the stupid and broken stuff in the early - * driver while porting to sparc64 platform. THANK YOU! - * - * (see mptbase.c) - * - * Copyright (c) 1999-2004 LSI Logic Corporation - * Original author: Steven J. Ralston - * (mailto:sjralston1@netscape.net) + * Copyright (c) 1999-2005 LSI Logic Corporation * (mailto:mpt_linux_developer@lsil.com) * - * $Id: mptscsih.c,v 1.104 2002/12/03 21:26:34 pdelaney Exp $ */ /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ /* @@ -96,27 +75,6 @@ MODULE_AUTHOR(MODULEAUTHOR); MODULE_DESCRIPTION(my_NAME); MODULE_LICENSE("GPL"); -/* Command line args */ -static int mpt_dv = MPTSCSIH_DOMAIN_VALIDATION; -MODULE_PARM(mpt_dv, "i"); -MODULE_PARM_DESC(mpt_dv, " DV Algorithm: enhanced=1, basic=0 (default=MPTSCSIH_DOMAIN_VALIDATION=1)"); - -static int mpt_width = MPTSCSIH_MAX_WIDTH; -MODULE_PARM(mpt_width, "i"); -MODULE_PARM_DESC(mpt_width, " Max Bus Width: wide=1, narrow=0 (default=MPTSCSIH_MAX_WIDTH=1)"); - -static int mpt_factor = MPTSCSIH_MIN_SYNC; -MODULE_PARM(mpt_factor, "h"); -MODULE_PARM_DESC(mpt_factor, " Min Sync Factor (default=MPTSCSIH_MIN_SYNC=0x08)"); - -static int mpt_saf_te = MPTSCSIH_SAF_TE; -MODULE_PARM(mpt_saf_te, "i"); -MODULE_PARM_DESC(mpt_saf_te, " Force enabling SEP Processor: enable=1 (default=MPTSCSIH_SAF_TE=0)"); - -static int mpt_pq_filter = 0; -MODULE_PARM(mpt_pq_filter, "i"); -MODULE_PARM_DESC(mpt_pq_filter, " Enable peripheral qualifier filter: enable=1 (default=0)"); - /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ typedef struct _BIG_SENSE_BUF { @@ -169,18 +127,17 @@ typedef struct _dv_parameters { u16 pad1; } DVPARAMETERS; - /* * Other private/forward protos... */ -static int mptscsih_io_done(MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf, MPT_FRAME_HDR *r); +int mptscsih_io_done(MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf, MPT_FRAME_HDR *r); static void mptscsih_report_queue_full(struct scsi_cmnd *sc, SCSIIOReply_t *pScsiReply, SCSIIORequest_t *pScsiReq); -static int mptscsih_taskmgmt_complete(MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf, MPT_FRAME_HDR *r); +int mptscsih_taskmgmt_complete(MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf, MPT_FRAME_HDR *r); static int mptscsih_AddSGE(MPT_ADAPTER *ioc, struct scsi_cmnd *SCpnt, SCSIIORequest_t *pReq, int req_idx); static void mptscsih_freeChainBuffers(MPT_ADAPTER *ioc, int req_idx); -static void copy_sense_data(struct scsi_cmnd *sc, MPT_SCSI_HOST *hd, MPT_FRAME_HDR *mf, SCSIIOReply_t *pScsiReply); +static void mptscsih_copy_sense_data(struct scsi_cmnd *sc, MPT_SCSI_HOST *hd, MPT_FRAME_HDR *mf, SCSIIOReply_t *pScsiReply); static int mptscsih_tm_pending_wait(MPT_SCSI_HOST * hd); static int mptscsih_tm_wait_for_completion(MPT_SCSI_HOST * hd, ulong timeout ); static u32 SCPNT_TO_LOOKUP_IDX(struct scsi_cmnd *sc); @@ -188,8 +145,8 @@ static u32 SCPNT_TO_LOOKUP_IDX(struct scsi_cmnd *sc); static int mptscsih_TMHandler(MPT_SCSI_HOST *hd, u8 type, u8 channel, u8 target, u8 lun, int ctx2abort, ulong timeout); static int mptscsih_IssueTaskMgmt(MPT_SCSI_HOST *hd, u8 type, u8 channel, u8 target, u8 lun, int ctx2abort, ulong timeout); -static int mptscsih_ioc_reset(MPT_ADAPTER *ioc, int post_reset); -static int mptscsih_event_process(MPT_ADAPTER *ioc, EventNotificationReply_t *pEvReply); +int mptscsih_ioc_reset(MPT_ADAPTER *ioc, int post_reset); +int mptscsih_event_process(MPT_ADAPTER *ioc, EventNotificationReply_t *pEvReply); static void mptscsih_initTarget(MPT_SCSI_HOST *hd, int bus_id, int target_id, u8 lun, char *data, int dlen); static void mptscsih_setTargetNegoParms(MPT_SCSI_HOST *hd, VirtDevice *target, char byte56); @@ -198,8 +155,7 @@ static void mptscsih_setDevicePage1Flags (u8 width, u8 factor, u8 offset, int *r static void mptscsih_no_negotiate(MPT_SCSI_HOST *hd, int target_id); static int mptscsih_writeSDP1(MPT_SCSI_HOST *hd, int portnum, int target, int flags); static int mptscsih_writeIOCPage4(MPT_SCSI_HOST *hd, int target_id, int bus); -static int mptscsih_scandv_complete(MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf, MPT_FRAME_HDR *r); -static void mptscsih_timer_expired(unsigned long data); +int mptscsih_scandv_complete(MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf, MPT_FRAME_HDR *r); static int mptscsih_do_cmd(MPT_SCSI_HOST *hd, INTERNAL_CMD *iocmd); static int mptscsih_synchronize_cache(MPT_SCSI_HOST *hd, int portnum); @@ -212,29 +168,14 @@ static int mptscsih_doDv(MPT_SCSI_HOST *hd, int channel, int target); static void mptscsih_dv_parms(MPT_SCSI_HOST *hd, DVPARAMETERS *dv,void *pPage); static void mptscsih_fillbuf(char *buffer, int size, int index, int width); #endif -/* module entry point */ -static int __init mptscsih_init (void); -static void __exit mptscsih_exit (void); -static int mptscsih_probe (struct pci_dev *, const struct pci_device_id *); -static void mptscsih_remove(struct pci_dev *); -static void mptscsih_shutdown(struct device *); +void mptscsih_remove(struct pci_dev *); +void mptscsih_shutdown(struct device *); #ifdef CONFIG_PM -static int mptscsih_suspend(struct pci_dev *pdev, pm_message_t state); -static int mptscsih_resume(struct pci_dev *pdev); +int mptscsih_suspend(struct pci_dev *pdev, pm_message_t state); +int mptscsih_resume(struct pci_dev *pdev); #endif - -/* - * Private data... - */ - -static int mpt_scsi_hosts = 0; - -static int ScsiDoneCtx = -1; -static int ScsiTaskCtx = -1; -static int ScsiScanDvCtx = -1; /* Used only for bus scan and dv */ - #define SNS_LEN(scp) sizeof((scp)->sense_buffer) #ifdef MPTSCSIH_ENABLE_DOMAIN_VALIDATION @@ -244,20 +185,9 @@ static int ScsiScanDvCtx = -1; /* Used only for bus scan and dv */ static DEFINE_SPINLOCK(dvtaskQ_lock); static int dvtaskQ_active = 0; static int dvtaskQ_release = 0; -static struct work_struct mptscsih_dvTask; +static struct work_struct dvTaskQ_task; #endif -/* - * Wait Queue setup - */ -static DECLARE_WAIT_QUEUE_HEAD (scandv_waitq); -static int scandv_wait_done = 1; - - -/* Driver command line structure - */ -static struct scsi_host_template driver_template; - /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ /** * mptscsih_add_sge - Place a simple SGE at address pAddr. @@ -619,7 +549,7 @@ nextSGEset: * * Returns 1 indicating alloc'd request frame ptr should be freed. */ -static int +int mptscsih_io_done(MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf, MPT_FRAME_HDR *mr) { struct scsi_cmnd *sc; @@ -677,8 +607,8 @@ mptscsih_io_done(MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf, MPT_FRAME_HDR *mr) sc->request_bufflen, xfer_cnt)); if (scsi_state & MPI_SCSI_STATE_AUTOSENSE_VALID) - copy_sense_data(sc, hd, mf, pScsiReply); - + mptscsih_copy_sense_data(sc, hd, mf, pScsiReply); + /* * Look for + dump FCP ResponseInfo[]! */ @@ -740,7 +670,7 @@ mptscsih_io_done(MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf, MPT_FRAME_HDR *mr) } dreplyprintk((KERN_NOTICE "RESIDUAL_MISMATCH: result=%x on id=%d\n", sc->result, sc->target)); break; - + case MPI_IOCSTATUS_SCSI_DATA_UNDERRUN: /* 0x0045 */ /* * Do upfront check for valid SenseData and give it @@ -773,7 +703,7 @@ mptscsih_io_done(MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf, MPT_FRAME_HDR *mr) */ if (scsi_status == MPI_SCSI_STATUS_TASK_SET_FULL) mptscsih_report_queue_full(sc, pScsiReply, pScsiReq); - + break; case MPI_IOCSTATUS_SCSI_RECOVERED_ERROR: /* 0x0040 */ @@ -905,18 +835,16 @@ mptscsih_flush_running_cmds(MPT_SCSI_HOST *hd) * Do OS callback * Free driver resources (chain, msg buffers) */ - if (scsi_device_online(SCpnt->device)) { - if (SCpnt->use_sg) { - pci_unmap_sg(ioc->pcidev, - (struct scatterlist *) SCpnt->request_buffer, - SCpnt->use_sg, - SCpnt->sc_data_direction); - } else if (SCpnt->request_bufflen) { - pci_unmap_single(ioc->pcidev, - SCpnt->SCp.dma_handle, - SCpnt->request_bufflen, - SCpnt->sc_data_direction); - } + if (SCpnt->use_sg) { + pci_unmap_sg(ioc->pcidev, + (struct scatterlist *) SCpnt->request_buffer, + SCpnt->use_sg, + SCpnt->sc_data_direction); + } else if (SCpnt->request_bufflen) { + pci_unmap_single(ioc->pcidev, + SCpnt->SCp.dma_handle, + SCpnt->request_bufflen, + SCpnt->sc_data_direction); } SCpnt->result = DID_RESET << 16; SCpnt->host_scribble = NULL; @@ -981,11 +909,6 @@ mptscsih_search_running_cmds(MPT_SCSI_HOST *hd, uint target, uint lun) } /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ -/* - * Hack! It might be nice to report if a device is returning QUEUE_FULL - * but maybe not each and every time... - */ -static long last_queue_full = 0; /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ /* @@ -1003,280 +926,20 @@ static void mptscsih_report_queue_full(struct scsi_cmnd *sc, SCSIIOReply_t *pScsiReply, SCSIIORequest_t *pScsiReq) { long time = jiffies; - - if (time - last_queue_full > 10 * HZ) { - char *ioc_str = "ioc?"; - - if (sc->device && sc->device->host != NULL && sc->device->host->hostdata != NULL) - ioc_str = ((MPT_SCSI_HOST *)sc->device->host->hostdata)->ioc->name; - dprintk((MYIOC_s_WARN_FMT "Device (%d:%d:%d) reported QUEUE_FULL!\n", - ioc_str, 0, sc->device->id, sc->device->lun)); - last_queue_full = time; - } -} - -/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ -static char *info_kbuf = NULL; - -/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ -/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ -/* - * mptscsih_probe - Installs scsi devices per bus. - * @pdev: Pointer to pci_dev structure - * - * Returns 0 for success, non-zero for failure. - * - */ - -static int -mptscsih_probe(struct pci_dev *pdev, const struct pci_device_id *id) -{ - struct Scsi_Host *sh; MPT_SCSI_HOST *hd; - MPT_ADAPTER *ioc = pci_get_drvdata(pdev); - unsigned long flags; - int sz, ii; - int numSGE = 0; - int scale; - int ioc_cap; - u8 *mem; - int error=0; - - - /* 20010202 -sralston - * Added sanity check on readiness of the MPT adapter. - */ - if (ioc->last_state != MPI_IOC_STATE_OPERATIONAL) { - printk(MYIOC_s_WARN_FMT - "Skipping because it's not operational!\n", - ioc->name); - return -ENODEV; - } - - if (!ioc->active) { - printk(MYIOC_s_WARN_FMT "Skipping because it's disabled!\n", - ioc->name); - return -ENODEV; - } - - /* Sanity check - ensure at least 1 port is INITIATOR capable - */ - ioc_cap = 0; - for (ii=0; ii < ioc->facts.NumberOfPorts; ii++) { - if (ioc->pfacts[ii].ProtocolFlags & - MPI_PORTFACTS_PROTOCOL_INITIATOR) - ioc_cap ++; - } - - if (!ioc_cap) { - printk(MYIOC_s_WARN_FMT - "Skipping ioc=%p because SCSI Initiator mode is NOT enabled!\n", - ioc->name, ioc); - return -ENODEV; - } - - sh = scsi_host_alloc(&driver_template, sizeof(MPT_SCSI_HOST)); - - if (!sh) { - printk(MYIOC_s_WARN_FMT - "Unable to register controller with SCSI subsystem\n", - ioc->name); - return -1; - } - - spin_lock_irqsave(&ioc->FreeQlock, flags); - - /* Attach the SCSI Host to the IOC structure - */ - ioc->sh = sh; - - sh->io_port = 0; - sh->n_io_port = 0; - sh->irq = 0; - - /* set 16 byte cdb's */ - sh->max_cmd_len = 16; - - /* Yikes! This is important! - * Otherwise, by default, linux - * only scans target IDs 0-7! - * pfactsN->MaxDevices unreliable - * (not supported in early - * versions of the FW). - * max_id = 1 + actual max id, - * max_lun = 1 + actual last lun, - * see hosts.h :o( - */ - if (ioc->bus_type == SCSI) { - sh->max_id = MPT_MAX_SCSI_DEVICES; - } else { - /* For FC, increase the queue depth - * from MPT_SCSI_CAN_QUEUE (31) - * to MPT_FC_CAN_QUEUE (63). - */ - sh->can_queue = MPT_FC_CAN_QUEUE; - sh->max_id = - MPT_MAX_FC_DEVICES<256 ? MPT_MAX_FC_DEVICES : 255; - } - - sh->max_lun = MPT_LAST_LUN + 1; - sh->max_channel = 0; - sh->this_id = ioc->pfacts[0].PortSCSIID; - - /* Required entry. - */ - sh->unique_id = ioc->id; - - /* Verify that we won't exceed the maximum - * number of chain buffers - * We can optimize: ZZ = req_sz/sizeof(SGE) - * For 32bit SGE's: - * numSGE = 1 + (ZZ-1)*(maxChain -1) + ZZ - * + (req_sz - 64)/sizeof(SGE) - * A slightly different algorithm is required for - * 64bit SGEs. - */ - scale = ioc->req_sz/(sizeof(dma_addr_t) + sizeof(u32)); - if (sizeof(dma_addr_t) == sizeof(u64)) { - numSGE = (scale - 1) * - (ioc->facts.MaxChainDepth-1) + scale + - (ioc->req_sz - 60) / (sizeof(dma_addr_t) + - sizeof(u32)); - } else { - numSGE = 1 + (scale - 1) * - (ioc->facts.MaxChainDepth-1) + scale + - (ioc->req_sz - 64) / (sizeof(dma_addr_t) + - sizeof(u32)); - } - - if (numSGE < sh->sg_tablesize) { - /* Reset this value */ - dprintk((MYIOC_s_INFO_FMT - "Resetting sg_tablesize to %d from %d\n", - ioc->name, numSGE, sh->sg_tablesize)); - sh->sg_tablesize = numSGE; - } - - /* Set the pci device pointer in Scsi_Host structure. - */ - scsi_set_device(sh, &ioc->pcidev->dev); - - spin_unlock_irqrestore(&ioc->FreeQlock, flags); - - hd = (MPT_SCSI_HOST *) sh->hostdata; - hd->ioc = ioc; - - /* SCSI needs scsi_cmnd lookup table! - * (with size equal to req_depth*PtrSz!) - */ - sz = ioc->req_depth * sizeof(void *); - mem = kmalloc(sz, GFP_ATOMIC); - if (mem == NULL) { - error = -ENOMEM; - goto mptscsih_probe_failed; - } - - memset(mem, 0, sz); - hd->ScsiLookup = (struct scsi_cmnd **) mem; - - dprintk((MYIOC_s_INFO_FMT "ScsiLookup @ %p, sz=%d\n", - ioc->name, hd->ScsiLookup, sz)); - - /* Allocate memory for the device structures. - * A non-Null pointer at an offset - * indicates a device exists. - * max_id = 1 + maximum id (hosts.h) - */ - sz = sh->max_id * sizeof(void *); - mem = kmalloc(sz, GFP_ATOMIC); - if (mem == NULL) { - error = -ENOMEM; - goto mptscsih_probe_failed; - } - - memset(mem, 0, sz); - hd->Targets = (VirtDevice **) mem; - - dprintk((KERN_INFO - " Targets @ %p, sz=%d\n", hd->Targets, sz)); - - /* Clear the TM flags - */ - hd->tmPending = 0; - hd->tmState = TM_STATE_NONE; - hd->resetPending = 0; - hd->abortSCpnt = NULL; - - /* Clear the pointer used to store - * single-threaded commands, i.e., those - * issued during a bus scan, dv and - * configuration pages. - */ - hd->cmdPtr = NULL; - /* Initialize this SCSI Hosts' timers - * To use, set the timer expires field - * and add_timer - */ - init_timer(&hd->timer); - hd->timer.data = (unsigned long) hd; - hd->timer.function = mptscsih_timer_expired; - - if (ioc->bus_type == SCSI) { - /* Update with the driver setup - * values. - */ - if (ioc->spi_data.maxBusWidth > mpt_width) - ioc->spi_data.maxBusWidth = mpt_width; - if (ioc->spi_data.minSyncFactor < mpt_factor) - ioc->spi_data.minSyncFactor = mpt_factor; - - if (ioc->spi_data.minSyncFactor == MPT_ASYNC) { - ioc->spi_data.maxSyncOffset = 0; - } - - ioc->spi_data.Saf_Te = mpt_saf_te; - - hd->negoNvram = 0; -#ifndef MPTSCSIH_ENABLE_DOMAIN_VALIDATION - hd->negoNvram = MPT_SCSICFG_USE_NVRAM; -#endif - ioc->spi_data.forceDv = 0; - ioc->spi_data.noQas = 0; - for (ii=0; ii < MPT_MAX_SCSI_DEVICES; ii++) { - ioc->spi_data.dvStatus[ii] = - MPT_SCSICFG_NEGOTIATE; - } - - for (ii=0; ii < MPT_MAX_SCSI_DEVICES; ii++) - ioc->spi_data.dvStatus[ii] |= - MPT_SCSICFG_DV_NOT_DONE; - - dinitprintk((MYIOC_s_INFO_FMT - "dv %x width %x factor %x saf_te %x\n", - ioc->name, mpt_dv, - mpt_width, - mpt_factor, - mpt_saf_te)); - } - - mpt_scsi_hosts++; + if (sc->device == NULL) + return; + if (sc->device->host == NULL) + return; + if ((hd = (MPT_SCSI_HOST *)sc->device->host->hostdata) == NULL) + return; - error = scsi_add_host (sh, &ioc->pcidev->dev); - if(error) { - dprintk((KERN_ERR MYNAM - "scsi_add_host failed\n")); - goto mptscsih_probe_failed; + if (time - hd->last_queue_full > 10 * HZ) { + dprintk((MYIOC_s_WARN_FMT "Device (%d:%d:%d) reported QUEUE_FULL!\n", + hd->ioc->name, 0, sc->device->id, sc->device->lun)); + hd->last_queue_full = time; } - - scsi_scan_host(sh); - return 0; - -mptscsih_probe_failed: - - mptscsih_remove(pdev); - return error; - } /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ @@ -1286,7 +949,7 @@ mptscsih_probe_failed: * * */ -static void +void mptscsih_remove(struct pci_dev *pdev) { MPT_ADAPTER *ioc = pci_get_drvdata(pdev); @@ -1294,12 +957,16 @@ mptscsih_remove(struct pci_dev *pdev) MPT_SCSI_HOST *hd; int count; unsigned long flags; + int sz1; if(!host) return; scsi_remove_host(host); + if((hd = (MPT_SCSI_HOST *)host->hostdata) == NULL) + return; + #ifdef MPTSCSIH_ENABLE_DOMAIN_VALIDATION /* Check DV thread active */ count = 10 * HZ; @@ -1321,40 +988,36 @@ mptscsih_remove(struct pci_dev *pdev) #endif #endif - hd = (MPT_SCSI_HOST *)host->hostdata; - if (hd != NULL) { - int sz1; + mptscsih_shutdown(&pdev->dev); - mptscsih_shutdown(&pdev->dev); + sz1=0; - sz1=0; + if (hd->ScsiLookup != NULL) { + sz1 = hd->ioc->req_depth * sizeof(void *); + kfree(hd->ScsiLookup); + hd->ScsiLookup = NULL; + } - if (hd->ScsiLookup != NULL) { - sz1 = hd->ioc->req_depth * sizeof(void *); - kfree(hd->ScsiLookup); - hd->ScsiLookup = NULL; - } + /* + * Free pointer array. + */ + kfree(hd->Targets); + hd->Targets = NULL; - if (hd->Targets != NULL) { - /* - * Free pointer array. - */ - kfree(hd->Targets); - hd->Targets = NULL; - } + dprintk((MYIOC_s_INFO_FMT + "Free'd ScsiLookup (%d) memory\n", + hd->ioc->name, sz1)); - dprintk((MYIOC_s_INFO_FMT - "Free'd ScsiLookup (%d) memory\n", - hd->ioc->name, sz1)); + kfree(hd->info_kbuf); - /* NULL the Scsi_Host pointer - */ - hd->ioc->sh = NULL; - } + /* NULL the Scsi_Host pointer + */ + hd->ioc->sh = NULL; scsi_host_put(host); - mpt_scsi_hosts--; + mpt_detach(pdev); + } /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ @@ -1362,7 +1025,7 @@ mptscsih_remove(struct pci_dev *pdev) * mptscsih_shutdown - reboot notifier * */ -static void +void mptscsih_shutdown(struct device * dev) { MPT_ADAPTER *ioc = pci_get_drvdata(to_pci_dev(dev)); @@ -1384,15 +1047,15 @@ mptscsih_shutdown(struct device * dev) #ifdef CONFIG_PM /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ /* - * mptscsih_suspend - Fusion MPT scsie driver suspend routine. + * mptscsih_suspend - Fusion MPT scsi driver suspend routine. * * */ -static int +int mptscsih_suspend(struct pci_dev *pdev, pm_message_t state) { mptscsih_shutdown(&pdev->dev); - return 0; + return mpt_suspend(pdev,state); } /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ @@ -1401,13 +1064,15 @@ mptscsih_suspend(struct pci_dev *pdev, pm_message_t state) * * */ -static int +int mptscsih_resume(struct pci_dev *pdev) { MPT_ADAPTER *ioc = pci_get_drvdata(pdev); struct Scsi_Host *host = ioc->sh; MPT_SCSI_HOST *hd; + mpt_resume(pdev); + if(!host) return 0; @@ -1422,9 +1087,9 @@ mptscsih_resume(struct pci_dev *pdev) if (!dvtaskQ_active) { dvtaskQ_active = 1; spin_unlock_irqrestore(&dvtaskQ_lock, lflags); - INIT_WORK(&mptscsih_dvTask, + INIT_WORK(&dvTaskQ_task, mptscsih_domainValidation, (void *) hd); - schedule_work(&mptscsih_dvTask); + schedule_work(&dvTaskQ_task); } else { spin_unlock_irqrestore(&dvtaskQ_lock, lflags); } @@ -1435,82 +1100,6 @@ mptscsih_resume(struct pci_dev *pdev) #endif -static struct mpt_pci_driver mptscsih_driver = { - .probe = mptscsih_probe, - .remove = mptscsih_remove, - .shutdown = mptscsih_shutdown, -#ifdef CONFIG_PM - .suspend = mptscsih_suspend, - .resume = mptscsih_resume, -#endif -}; - -/* SCSI host fops start here... */ -/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ -/** - * mptscsih_init - Register MPT adapter(s) as SCSI host(s) with - * linux scsi mid-layer. - * - * Returns 0 for success, non-zero for failure. - */ -static int __init -mptscsih_init(void) -{ - - show_mptmod_ver(my_NAME, my_VERSION); - - ScsiDoneCtx = mpt_register(mptscsih_io_done, MPTSCSIH_DRIVER); - ScsiTaskCtx = mpt_register(mptscsih_taskmgmt_complete, MPTSCSIH_DRIVER); - ScsiScanDvCtx = mpt_register(mptscsih_scandv_complete, MPTSCSIH_DRIVER); - - if (mpt_event_register(ScsiDoneCtx, mptscsih_event_process) == 0) { - devtprintk((KERN_INFO MYNAM - ": Registered for IOC event notifications\n")); - } - - if (mpt_reset_register(ScsiDoneCtx, mptscsih_ioc_reset) == 0) { - dprintk((KERN_INFO MYNAM - ": Registered for IOC reset notifications\n")); - } - - if(mpt_device_driver_register(&mptscsih_driver, - MPTSCSIH_DRIVER) != 0 ) { - dprintk((KERN_INFO MYNAM - ": failed to register dd callbacks\n")); - } - - return 0; - -} - -/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ -/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ -/** - * mptscsih_exit - Unregisters MPT adapter(s) - * - */ -static void __exit -mptscsih_exit(void) -{ - mpt_device_driver_deregister(MPTSCSIH_DRIVER); - - mpt_reset_deregister(ScsiDoneCtx); - dprintk((KERN_INFO MYNAM - ": Deregistered for IOC reset notifications\n")); - - mpt_event_deregister(ScsiDoneCtx); - dprintk((KERN_INFO MYNAM - ": Deregistered for IOC event notifications\n")); - - mpt_deregister(ScsiScanDvCtx); - mpt_deregister(ScsiTaskCtx); - mpt_deregister(ScsiDoneCtx); - - if (info_kbuf != NULL) - kfree(info_kbuf); - -} - /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ /** * mptscsih_info - Return information about MPT adapter @@ -1520,24 +1109,25 @@ mptscsih_exit(void) * * Returns pointer to buffer where information was written. */ -static const char * +const char * mptscsih_info(struct Scsi_Host *SChost) { MPT_SCSI_HOST *h; int size = 0; - if (info_kbuf == NULL) - if ((info_kbuf = kmalloc(0x1000 /* 4Kb */, GFP_KERNEL)) == NULL) - return info_kbuf; - h = (MPT_SCSI_HOST *)SChost->hostdata; - info_kbuf[0] = '\0'; + if (h) { - mpt_print_ioc_summary(h->ioc, info_kbuf, &size, 0, 0); - info_kbuf[size-1] = '\0'; + if (h->info_kbuf == NULL) + if ((h->info_kbuf = kmalloc(0x1000 /* 4Kb */, GFP_KERNEL)) == NULL) + return h->info_kbuf; + h->info_kbuf[0] = '\0'; + + mpt_print_ioc_summary(h->ioc, h->info_kbuf, &size, 0, 0); + h->info_kbuf[size-1] = '\0'; } - return info_kbuf; + return h->info_kbuf; } struct info_str { @@ -1547,7 +1137,8 @@ struct info_str { int pos; }; -static void copy_mem_info(struct info_str *info, char *data, int len) +static void +mptscsih_copy_mem_info(struct info_str *info, char *data, int len) { if (info->pos + len > info->length) len = info->length - info->pos; @@ -1568,7 +1159,8 @@ static void copy_mem_info(struct info_str *info, char *data, int len) } } -static int copy_info(struct info_str *info, char *fmt, ...) +static int +mptscsih_copy_info(struct info_str *info, char *fmt, ...) { va_list args; char buf[81]; @@ -1578,11 +1170,12 @@ static int copy_info(struct info_str *info, char *fmt, ...) len = vsprintf(buf, fmt, args); va_end(args); - copy_mem_info(info, buf, len); + mptscsih_copy_mem_info(info, buf, len); return len; } -static int mptscsih_host_info(MPT_ADAPTER *ioc, char *pbuf, off_t offset, int len) +static int +mptscsih_host_info(MPT_ADAPTER *ioc, char *pbuf, off_t offset, int len) { struct info_str info; @@ -1591,10 +1184,10 @@ static int mptscsih_host_info(MPT_ADAPTER *ioc, char *pbuf, off_t offset, int le info.offset = offset; info.pos = 0; - copy_info(&info, "%s: %s, ", ioc->name, ioc->prod_name); - copy_info(&info, "%s%08xh, ", MPT_FW_REV_MAGIC_ID_STRING, ioc->facts.FWVersion.Word); - copy_info(&info, "Ports=%d, ", ioc->facts.NumberOfPorts); - copy_info(&info, "MaxQ=%d\n", ioc->req_depth); + mptscsih_copy_info(&info, "%s: %s, ", ioc->name, ioc->prod_name); + mptscsih_copy_info(&info, "%s%08xh, ", MPT_FW_REV_MAGIC_ID_STRING, ioc->facts.FWVersion.Word); + mptscsih_copy_info(&info, "Ports=%d, ", ioc->facts.NumberOfPorts); + mptscsih_copy_info(&info, "MaxQ=%d\n", ioc->req_depth); return ((info.pos > info.offset) ? info.pos - info.offset : 0); } @@ -1612,7 +1205,7 @@ static int mptscsih_host_info(MPT_ADAPTER *ioc, char *pbuf, off_t offset, int le * hostno: scsi host number * func: if write = 1; if read = 0 */ -static int +int mptscsih_proc_info(struct Scsi_Host *host, char *buffer, char **start, off_t offset, int length, int func) { @@ -1649,7 +1242,7 @@ mptscsih_proc_info(struct Scsi_Host *host, char *buffer, char **start, off_t off * * Returns 0. (rtn value discarded by linux scsi mid-layer) */ -static int +int mptscsih_qcmd(struct scsi_cmnd *SCpnt, void (*done)(struct scsi_cmnd *)) { MPT_SCSI_HOST *hd; @@ -1684,7 +1277,7 @@ mptscsih_qcmd(struct scsi_cmnd *SCpnt, void (*done)(struct scsi_cmnd *)) /* * Put together a MPT SCSI request... */ - if ((mf = mpt_get_msg_frame(ScsiDoneCtx, hd->ioc)) == NULL) { + if ((mf = mpt_get_msg_frame(hd->ioc->DoneCtx, hd->ioc)) == NULL) { dprintk((MYIOC_s_WARN_FMT "QueueCmd, no msg frames!!\n", hd->ioc->name)); return SCSI_MLQUEUE_HOST_BUSY; @@ -1696,8 +1289,7 @@ mptscsih_qcmd(struct scsi_cmnd *SCpnt, void (*done)(struct scsi_cmnd *)) ADD_INDEX_LOG(my_idx); - /* BUG FIX! 19991030 -sralston - * TUR's being issued with scsictl=0x02000000 (DATA_IN)! + /* TUR's being issued with scsictl=0x02000000 (DATA_IN)! * Seems we may receive a buffer (datalen>0) even when there * will be no data transfer! GRRRRR... */ @@ -1791,9 +1383,9 @@ mptscsih_qcmd(struct scsi_cmnd *SCpnt, void (*done)(struct scsi_cmnd *)) if (!dvtaskQ_active) { dvtaskQ_active = 1; spin_unlock_irqrestore(&dvtaskQ_lock, lflags); - INIT_WORK(&mptscsih_dvTask, mptscsih_domainValidation, (void *) hd); + INIT_WORK(&dvTaskQ_task, mptscsih_domainValidation, (void *) hd); - schedule_work(&mptscsih_dvTask); + schedule_work(&dvTaskQ_task); } else { spin_unlock_irqrestore(&dvtaskQ_lock, lflags); } @@ -1819,7 +1411,7 @@ mptscsih_qcmd(struct scsi_cmnd *SCpnt, void (*done)(struct scsi_cmnd *)) } #endif - mpt_put_msg_frame(ScsiDoneCtx, hd->ioc, mf); + mpt_put_msg_frame(hd->ioc->DoneCtx, hd->ioc, mf); dmfprintk((MYIOC_s_INFO_FMT "Issued SCSI cmd (%p) mf=%p idx=%d\n", hd->ioc->name, SCpnt, mf, my_idx)); DBG_DUMP_REQUEST_FRAME(mf) @@ -2036,7 +1628,7 @@ mptscsih_IssueTaskMgmt(MPT_SCSI_HOST *hd, u8 type, u8 channel, u8 target, u8 lun /* Return Fail to calling function if no message frames available. */ - if ((mf = mpt_get_msg_frame(ScsiTaskCtx, hd->ioc)) == NULL) { + if ((mf = mpt_get_msg_frame(hd->ioc->TaskCtx, hd->ioc)) == NULL) { dfailprintk((MYIOC_s_ERR_FMT "IssueTaskMgmt, no msg frames!!\n", hd->ioc->name)); //return FAILED; @@ -2075,7 +1667,7 @@ mptscsih_IssueTaskMgmt(MPT_SCSI_HOST *hd, u8 type, u8 channel, u8 target, u8 lun DBG_DUMP_TM_REQUEST_FRAME((u32 *)pScsiTm); - if ((retval = mpt_send_handshake_request(ScsiTaskCtx, hd->ioc, + if ((retval = mpt_send_handshake_request(hd->ioc->TaskCtx, hd->ioc, sizeof(SCSITaskMgmt_t), (u32*)pScsiTm, CAN_SLEEP)) != 0) { dfailprintk((MYIOC_s_ERR_FMT "_send_handshake FAILED!" @@ -2107,7 +1699,7 @@ mptscsih_IssueTaskMgmt(MPT_SCSI_HOST *hd, u8 type, u8 channel, u8 target, u8 lun * * Returns SUCCESS or FAILED. */ -static int +int mptscsih_abort(struct scsi_cmnd * SCpnt) { MPT_SCSI_HOST *hd; @@ -2115,7 +1707,6 @@ mptscsih_abort(struct scsi_cmnd * SCpnt) MPT_FRAME_HDR *mf; u32 ctx2abort; int scpnt_idx; - spinlock_t *host_lock = SCpnt->device->host->host_lock; /* If we can't locate our host adapter structure, return FAILED status. */ @@ -2163,7 +1754,6 @@ mptscsih_abort(struct scsi_cmnd * SCpnt) hd->abortSCpnt = SCpnt; - spin_unlock_irq(host_lock); if (mptscsih_TMHandler(hd, MPI_SCSITASKMGMT_TASKTYPE_ABORT_TASK, SCpnt->device->channel, SCpnt->device->id, SCpnt->device->lun, ctx2abort, 2 /* 2 second timeout */) @@ -2180,8 +1770,6 @@ mptscsih_abort(struct scsi_cmnd * SCpnt) hd->tmPending = 0; hd->tmState = TM_STATE_NONE; - spin_lock_irq(host_lock); - /* Unmap the DMA buffers, if any. */ if (SCpnt->use_sg) { pci_unmap_sg(ioc->pcidev, (struct scatterlist *) SCpnt->request_buffer, @@ -2197,7 +1785,6 @@ mptscsih_abort(struct scsi_cmnd * SCpnt) mpt_free_msg_frame(ioc, mf); return FAILED; } - spin_lock_irq(host_lock); return SUCCESS; } @@ -2210,11 +1797,10 @@ mptscsih_abort(struct scsi_cmnd * SCpnt) * * Returns SUCCESS or FAILED. */ -static int +int mptscsih_dev_reset(struct scsi_cmnd * SCpnt) { MPT_SCSI_HOST *hd; - spinlock_t *host_lock = SCpnt->device->host->host_lock; /* If we can't locate our host adapter structure, return FAILED status. */ @@ -2231,7 +1817,6 @@ mptscsih_dev_reset(struct scsi_cmnd * SCpnt) printk(KERN_WARNING MYNAM ": %s: >> Attempting target reset! (sc=%p)\n", hd->ioc->name, SCpnt); - spin_unlock_irq(host_lock); if (mptscsih_TMHandler(hd, MPI_SCSITASKMGMT_TASKTYPE_TARGET_RESET, SCpnt->device->channel, SCpnt->device->id, 0, 0, 5 /* 5 second timeout */) @@ -2243,12 +1828,10 @@ mptscsih_dev_reset(struct scsi_cmnd * SCpnt) hd->ioc->name, SCpnt); hd->tmPending = 0; hd->tmState = TM_STATE_NONE; - spin_lock_irq(host_lock); return FAILED; } - spin_lock_irq(host_lock); - return SUCCESS; + return SUCCESS; } /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ @@ -2260,7 +1843,7 @@ mptscsih_dev_reset(struct scsi_cmnd * SCpnt) * * Returns SUCCESS or FAILED. */ -static int +int mptscsih_bus_reset(struct scsi_cmnd * SCpnt) { MPT_SCSI_HOST *hd; @@ -2282,7 +1865,6 @@ mptscsih_bus_reset(struct scsi_cmnd * SCpnt) hd->timeouts++; /* We are now ready to execute the task management request. */ - spin_unlock_irq(host_lock); if (mptscsih_TMHandler(hd, MPI_SCSITASKMGMT_TASKTYPE_RESET_BUS, SCpnt->device->channel, 0, 0, 0, 5 /* 5 second timeout */) < 0){ @@ -2298,7 +1880,7 @@ mptscsih_bus_reset(struct scsi_cmnd * SCpnt) spin_lock_irq(host_lock); return FAILED; } - spin_lock_irq(host_lock); + return SUCCESS; } @@ -2312,12 +1894,11 @@ mptscsih_bus_reset(struct scsi_cmnd * SCpnt) * * Returns SUCCESS or FAILED. */ -static int +int mptscsih_host_reset(struct scsi_cmnd *SCpnt) { MPT_SCSI_HOST * hd; int status = SUCCESS; - spinlock_t *host_lock = SCpnt->device->host->host_lock; /* If we can't locate the host to reset, then we failed. */ if ((hd = (MPT_SCSI_HOST *) SCpnt->device->host->hostdata) == NULL){ @@ -2333,7 +1914,6 @@ mptscsih_host_reset(struct scsi_cmnd *SCpnt) /* If our attempts to reset the host failed, then return a failed * status. The host will be taken off line by the SCSI mid-layer. */ - spin_unlock_irq(host_lock); if (mpt_HardResetHandler(hd->ioc, CAN_SLEEP) < 0){ status = FAILED; } else { @@ -2343,8 +1923,6 @@ mptscsih_host_reset(struct scsi_cmnd *SCpnt) hd->tmPending = 0; hd->tmState = TM_STATE_NONE; } - spin_lock_irq(host_lock); - dtmprintk( ( KERN_WARNING MYNAM ": mptscsih_host_reset: " "Status = %s\n", @@ -2426,7 +2004,7 @@ mptscsih_tm_wait_for_completion(MPT_SCSI_HOST * hd, ulong timeout ) * * Returns 1 indicating alloc'd request frame ptr should be freed. */ -static int +int mptscsih_taskmgmt_complete(MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf, MPT_FRAME_HDR *mr) { SCSITaskMgmtReply_t *pScsiTmReply; @@ -2509,7 +2087,7 @@ mptscsih_taskmgmt_complete(MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf, MPT_FRAME_HDR *m /* * This is anyones guess quite frankly. */ -static int +int mptscsih_bios_param(struct scsi_device * sdev, struct block_device *bdev, sector_t capacity, int geom[]) { @@ -2556,7 +2134,7 @@ mptscsih_bios_param(struct scsi_device * sdev, struct block_device *bdev, * Return non-zero if allocation fails. * Init memory once per id (not LUN). */ -static int +int mptscsih_slave_alloc(struct scsi_device *device) { struct Scsi_Host *host = device->host; @@ -2599,7 +2177,8 @@ mptscsih_slave_alloc(struct scsi_device *device) return 0; } -static int mptscsih_is_raid_volume(MPT_SCSI_HOST *hd, uint id) +static int +mptscsih_is_raid_volume(MPT_SCSI_HOST *hd, uint id) { int i; @@ -2618,7 +2197,7 @@ static int mptscsih_is_raid_volume(MPT_SCSI_HOST *hd, uint id) * OS entry point to allow for host driver to free allocated memory * Called if no device present or device being unloaded */ -static void +void mptscsih_slave_destroy(struct scsi_device *device) { struct Scsi_Host *host = device->host; @@ -2639,7 +2218,7 @@ mptscsih_slave_destroy(struct scsi_device *device) kfree(hd->Targets[target]); hd->Targets[target] = NULL; - + if (hd->ioc->bus_type == SCSI) { if (mptscsih_is_raid_volume(hd, target)) { hd->ioc->spi_data.forceDv |= MPT_SCSICFG_RELOAD_IOC_PG3; @@ -2695,7 +2274,7 @@ mptscsih_set_queue_depth(struct scsi_device *device, MPT_SCSI_HOST *hd, * member to 1 if a device does not support Q tags. * Return non-zero if fails. */ -static int +int mptscsih_slave_configure(struct scsi_device *device) { struct Scsi_Host *sh = device->host; @@ -2758,7 +2337,7 @@ slave_configure_exit: return 0; } -static ssize_t +ssize_t mptscsih_store_queue_depth(struct device *dev, const char *buf, size_t count) { int depth; @@ -2788,7 +2367,7 @@ mptscsih_store_queue_depth(struct device *dev, const char *buf, size_t count) * */ static void -copy_sense_data(struct scsi_cmnd *sc, MPT_SCSI_HOST *hd, MPT_FRAME_HDR *mf, SCSIIOReply_t *pScsiReply) +mptscsih_copy_sense_data(struct scsi_cmnd *sc, MPT_SCSI_HOST *hd, MPT_FRAME_HDR *mf, SCSIIOReply_t *pScsiReply) { VirtDevice *target; SCSIIORequest_t *pReq; @@ -2854,7 +2433,7 @@ SCPNT_TO_LOOKUP_IDX(struct scsi_cmnd *sc) } /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ -static int +int mptscsih_ioc_reset(MPT_ADAPTER *ioc, int reset_phase) { MPT_SCSI_HOST *hd; @@ -2949,8 +2528,8 @@ mptscsih_ioc_reset(MPT_ADAPTER *ioc, int reset_phase) */ hd->pLocal = &hd->localReply; hd->pLocal->completion = MPT_SCANDV_DID_RESET; - scandv_wait_done = 1; - wake_up(&scandv_waitq); + hd->scandv_wait_done = 1; + wake_up(&hd->scandv_waitq); hd->cmdPtr = NULL; } @@ -2969,7 +2548,7 @@ mptscsih_ioc_reset(MPT_ADAPTER *ioc, int reset_phase) } /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ -static int +int mptscsih_event_process(MPT_ADAPTER *ioc, EventNotificationReply_t *pEvReply) { MPT_SCSI_HOST *hd; @@ -3085,42 +2664,6 @@ mptscsih_event_process(MPT_ADAPTER *ioc, EventNotificationReply_t *pEvReply) return 1; /* currently means nothing really */ } -static struct device_attribute mptscsih_queue_depth_attr = { - .attr = { - .name = "queue_depth", - .mode = S_IWUSR, - }, - .store = mptscsih_store_queue_depth, -}; - -static struct device_attribute *mptscsih_dev_attrs[] = { - &mptscsih_queue_depth_attr, - NULL, -}; - -static struct scsi_host_template driver_template = { - .proc_name = "mptscsih", - .proc_info = mptscsih_proc_info, - .name = "MPT SCSI Host", - .info = mptscsih_info, - .queuecommand = mptscsih_qcmd, - .slave_alloc = mptscsih_slave_alloc, - .slave_configure = mptscsih_slave_configure, - .slave_destroy = mptscsih_slave_destroy, - .eh_abort_handler = mptscsih_abort, - .eh_device_reset_handler = mptscsih_dev_reset, - .eh_bus_reset_handler = mptscsih_bus_reset, - .eh_host_reset_handler = mptscsih_host_reset, - .bios_param = mptscsih_bios_param, - .can_queue = MPT_SCSI_CAN_QUEUE, - .this_id = -1, - .sg_tablesize = MPT_SCSI_SG_DEPTH, - .max_sectors = 8192, - .cmd_per_lun = 7, - .use_clustering = ENABLE_CLUSTERING, - .sdev_attrs = mptscsih_dev_attrs, -}; - /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ /* * mptscsih_initTarget - Target, LUN alloc/free functionality. @@ -3158,9 +2701,9 @@ mptscsih_initTarget(MPT_SCSI_HOST *hd, int bus_id, int target_id, u8 lun, char * * around a bug in th emid-layer in some distributions in which the mid-layer will * continue to try to communicate to the LUN and evntually create a dummy LUN. */ - if (mpt_pq_filter && dlen && (data[0] & 0xE0)) + if (hd->mpt_pq_filter && dlen && (data[0] & 0xE0)) data[0] |= 0x40; - + /* Is LUN supported? If so, upper 2 bits will be 0 * in first byte of inquiry data. */ @@ -3307,7 +2850,7 @@ mptscsih_setTargetNegoParms(MPT_SCSI_HOST *hd, VirtDevice *target, char byte56) ddvtprintk((KERN_INFO "Enabling QAS on id=%d due to ~TARGET_FLAGS_VALID_56!\n", id)); noQas = 0; } - + offset = pspi_data->maxSyncOffset; /* If RAID, never disable QAS @@ -3401,7 +2944,7 @@ mptscsih_setTargetNegoParms(MPT_SCSI_HOST *hd, VirtDevice *target, char byte56) if ( (vdev = hd->Targets[ii]) ) { vdev->negoFlags |= MPT_TARGET_NO_NEGO_QAS; mptscsih_writeSDP1(hd, 0, ii, vdev->negoFlags); - } + } } } } @@ -3426,14 +2969,15 @@ mptscsih_setTargetNegoParms(MPT_SCSI_HOST *hd, VirtDevice *target, char byte56) * Tapes, initTarget will set this flag on completion of Inquiry command. * Called only if DV_NOT_DONE flag is set */ -static void mptscsih_set_dvflags(MPT_SCSI_HOST *hd, SCSIIORequest_t *pReq) +static void +mptscsih_set_dvflags(MPT_SCSI_HOST *hd, SCSIIORequest_t *pReq) { u8 cmd; ScsiCfgData *pSpi; ddvtprintk((" set_dvflags: id=%d lun=%d negoNvram=%x cmd=%x\n", pReq->TargetID, pReq->LUN[1], hd->negoNvram, pReq->CDB[0])); - + if ((pReq->LUN[1] != 0) || (hd->negoNvram != 0)) return; @@ -3464,7 +3008,8 @@ static void mptscsih_set_dvflags(MPT_SCSI_HOST *hd, SCSIIORequest_t *pReq) * If no Target, bus reset on 1st I/O. Set the flag to * prevent any future negotiations to this device. */ -static void mptscsih_no_negotiate(MPT_SCSI_HOST *hd, int target_id) +static void +mptscsih_no_negotiate(MPT_SCSI_HOST *hd, int target_id) { if ((hd->Targets) && (hd->Targets[target_id] == NULL)) @@ -3631,7 +3176,7 @@ mptscsih_writeSDP1(MPT_SCSI_HOST *hd, int portnum, int target_id, int flags) offset = pTarget->maxOffset; negoFlags = pTarget->negoFlags; } - + #ifdef MPTSCSIH_ENABLE_DOMAIN_VALIDATION /* Force to async and narrow if DV has not been executed * for this ID @@ -3653,7 +3198,7 @@ mptscsih_writeSDP1(MPT_SCSI_HOST *hd, int portnum, int target_id, int flags) /* Get a MF for this command. */ - if ((mf = mpt_get_msg_frame(ScsiDoneCtx, ioc)) == NULL) { + if ((mf = mpt_get_msg_frame(ioc->DoneCtx, ioc)) == NULL) { dprintk((MYIOC_s_WARN_FMT "write SDP1: no msg frames!\n", ioc->name)); return -EAGAIN; @@ -3717,7 +3262,7 @@ mptscsih_writeSDP1(MPT_SCSI_HOST *hd, int portnum, int target_id, int flags) ioc->name, id, (id | (bus<<8)), requested, configuration)); - mpt_put_msg_frame(ScsiDoneCtx, ioc, mf); + mpt_put_msg_frame(ioc->DoneCtx, ioc, mf); } return 0; @@ -3748,7 +3293,7 @@ mptscsih_writeIOCPage4(MPT_SCSI_HOST *hd, int target_id, int bus) /* Get a MF for this command. */ - if ((mf = mpt_get_msg_frame(ScsiDoneCtx, ioc)) == NULL) { + if ((mf = mpt_get_msg_frame(ioc->DoneCtx, ioc)) == NULL) { dprintk((MYIOC_s_WARN_FMT "writeIOCPage4 : no msg frames!\n", ioc->name)); return -EAGAIN; @@ -3794,7 +3339,7 @@ mptscsih_writeIOCPage4(MPT_SCSI_HOST *hd, int target_id, int bus) "writeIOCPage4: MaxSEP=%d ActiveSEP=%d id=%d bus=%d\n", ioc->name, IOCPage4Ptr->MaxSEP, IOCPage4Ptr->ActiveSEP, target_id, bus)); - mpt_put_msg_frame(ScsiDoneCtx, ioc, mf); + mpt_put_msg_frame(ioc->DoneCtx, ioc, mf); return 0; } @@ -3824,7 +3369,7 @@ mptscsih_writeIOCPage4(MPT_SCSI_HOST *hd, int target_id, int bus) * in the IOC member localReply structure. * Used ONLY for DV and other internal commands. */ -static int +int mptscsih_scandv_complete(MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf, MPT_FRAME_HDR *mr) { MPT_SCSI_HOST *hd; @@ -3832,6 +3377,8 @@ mptscsih_scandv_complete(MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf, MPT_FRAME_HDR *mr) int completionCode; u16 req_idx; + hd = (MPT_SCSI_HOST *) ioc->sh->hostdata; + if ((mf == NULL) || (mf >= MPT_INDEX_2_MFPTR(ioc, ioc->req_depth))) { printk(MYIOC_s_ERR_FMT @@ -3840,7 +3387,6 @@ mptscsih_scandv_complete(MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf, MPT_FRAME_HDR *mr) goto wakeup; } - hd = (MPT_SCSI_HOST *) ioc->sh->hostdata; del_timer(&hd->timer); req_idx = le16_to_cpu(mf->u.frame.hwhdr.msgctxu.fld.req_idx); hd->ScsiLookup[req_idx] = NULL; @@ -3972,8 +3518,8 @@ wakeup: /* * Wake up the original calling thread */ - scandv_wait_done = 1; - wake_up(&scandv_waitq); + hd->scandv_wait_done = 1; + wake_up(&hd->scandv_waitq); return 1; } @@ -3984,7 +3530,8 @@ wakeup: * @data: Pointer to MPT_SCSI_HOST recast as an unsigned long * */ -static void mptscsih_timer_expired(unsigned long data) +void +mptscsih_timer_expired(unsigned long data) { MPT_SCSI_HOST *hd = (MPT_SCSI_HOST *) data; @@ -4051,7 +3598,7 @@ mptscsih_do_raid(MPT_SCSI_HOST *hd, u8 action, INTERNAL_CMD *io) /* Get and Populate a free Frame */ - if ((mf = mpt_get_msg_frame(ScsiScanDvCtx, hd->ioc)) == NULL) { + if ((mf = mpt_get_msg_frame(hd->ioc->InternalCtx, hd->ioc)) == NULL) { ddvprintk((MYIOC_s_WARN_FMT "_do_raid: no msg frames!\n", hd->ioc->name)); return -EAGAIN; @@ -4077,7 +3624,7 @@ mptscsih_do_raid(MPT_SCSI_HOST *hd, u8 action, INTERNAL_CMD *io) hd->pLocal = NULL; hd->timer.expires = jiffies + HZ*10; /* 10 second timeout */ - scandv_wait_done = 0; + hd->scandv_wait_done = 0; /* Save cmd pointer, for resource free if timeout or * FW reload occurs @@ -4085,8 +3632,8 @@ mptscsih_do_raid(MPT_SCSI_HOST *hd, u8 action, INTERNAL_CMD *io) hd->cmdPtr = mf; add_timer(&hd->timer); - mpt_put_msg_frame(ScsiScanDvCtx, hd->ioc, mf); - wait_event(scandv_waitq, scandv_wait_done); + mpt_put_msg_frame(hd->ioc->InternalCtx, hd->ioc, mf); + wait_event(hd->scandv_waitq, hd->scandv_wait_done); if ((hd->pLocal == NULL) || (hd->pLocal->completion != MPT_SCANDV_GOOD)) return -1; @@ -4232,7 +3779,7 @@ mptscsih_do_cmd(MPT_SCSI_HOST *hd, INTERNAL_CMD *io) /* Get and Populate a free Frame */ - if ((mf = mpt_get_msg_frame(ScsiScanDvCtx, hd->ioc)) == NULL) { + if ((mf = mpt_get_msg_frame(hd->ioc->InternalCtx, hd->ioc)) == NULL) { ddvprintk((MYIOC_s_WARN_FMT "No msg frames!\n", hd->ioc->name)); return -EBUSY; @@ -4314,7 +3861,7 @@ mptscsih_do_cmd(MPT_SCSI_HOST *hd, INTERNAL_CMD *io) */ hd->pLocal = NULL; hd->timer.expires = jiffies + HZ*cmdTimeout; - scandv_wait_done = 0; + hd->scandv_wait_done = 0; /* Save cmd pointer, for resource free if timeout or * FW reload occurs @@ -4322,8 +3869,8 @@ mptscsih_do_cmd(MPT_SCSI_HOST *hd, INTERNAL_CMD *io) hd->cmdPtr = mf; add_timer(&hd->timer); - mpt_put_msg_frame(ScsiScanDvCtx, hd->ioc, mf); - wait_event(scandv_waitq, scandv_wait_done); + mpt_put_msg_frame(hd->ioc->InternalCtx, hd->ioc, mf); + wait_event(hd->scandv_waitq, hd->scandv_wait_done); if (hd->pLocal) { rc = hd->pLocal->completion; @@ -4640,7 +4187,8 @@ mptscsih_domainValidation(void *arg) /* Search IOC page 3 to determine if this is hidden physical disk */ -static int mptscsih_is_phys_disk(MPT_ADAPTER *ioc, int id) +static int +mptscsih_is_phys_disk(MPT_ADAPTER *ioc, int id) { if (ioc->spi_data.pIocPg3) { Ioc3PhysDisk_t *pPDisk = ioc->spi_data.pIocPg3->PhysDisk; @@ -4659,7 +4207,8 @@ static int mptscsih_is_phys_disk(MPT_ADAPTER *ioc, int id) /* Write SDP1 if no QAS has been enabled */ -static void mptscsih_qas_check(MPT_SCSI_HOST *hd, int id) +static void +mptscsih_qas_check(MPT_SCSI_HOST *hd, int id) { VirtDevice *pTarget; int ii; @@ -5157,7 +4706,7 @@ mptscsih_doDv(MPT_SCSI_HOST *hd, int bus_number, int id) } ddvprintk((MYIOC_s_NOTE_FMT "DV: Basic test on id=%d completed OK.\n", ioc->name, id)); - if (mpt_dv == 0) + if (ioc->spi_data.mpt_dv == 0) goto target_done; inq0 = (*pbuf1) & 0x1F; @@ -6015,7 +5564,29 @@ mptscsih_fillbuf(char *buffer, int size, int index, int width) } #endif /* ~MPTSCSIH_ENABLE_DOMAIN_VALIDATION */ -/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ +EXPORT_SYMBOL(mptscsih_remove); +EXPORT_SYMBOL(mptscsih_shutdown); +#ifdef CONFIG_PM +EXPORT_SYMBOL(mptscsih_suspend); +EXPORT_SYMBOL(mptscsih_resume); +#endif +EXPORT_SYMBOL(mptscsih_proc_info); +EXPORT_SYMBOL(mptscsih_info); +EXPORT_SYMBOL(mptscsih_qcmd); +EXPORT_SYMBOL(mptscsih_slave_alloc); +EXPORT_SYMBOL(mptscsih_slave_destroy); +EXPORT_SYMBOL(mptscsih_slave_configure); +EXPORT_SYMBOL(mptscsih_abort); +EXPORT_SYMBOL(mptscsih_dev_reset); +EXPORT_SYMBOL(mptscsih_bus_reset); +EXPORT_SYMBOL(mptscsih_host_reset); +EXPORT_SYMBOL(mptscsih_bios_param); +EXPORT_SYMBOL(mptscsih_io_done); +EXPORT_SYMBOL(mptscsih_taskmgmt_complete); +EXPORT_SYMBOL(mptscsih_scandv_complete); +EXPORT_SYMBOL(mptscsih_event_process); +EXPORT_SYMBOL(mptscsih_ioc_reset); +EXPORT_SYMBOL(mptscsih_store_queue_depth); +EXPORT_SYMBOL(mptscsih_timer_expired); -module_init(mptscsih_init); -module_exit(mptscsih_exit); +/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ diff --git a/drivers/message/fusion/mptscsih.h b/drivers/message/fusion/mptscsih.h index 5cb2fd45c38..9f519836eff 100644 --- a/drivers/message/fusion/mptscsih.h +++ b/drivers/message/fusion/mptscsih.h @@ -1,26 +1,13 @@ /* - * linux/drivers/message/fusion/mptscsih.h + * linux/drivers/message/fusion/mptscsi.h * High performance SCSI / Fibre Channel SCSI Host device driver. * For use with PCI chip/adapter(s): * LSIFC9xx/LSI409xx Fibre Channel * running LSI Logic Fusion MPT (Message Passing Technology) firmware. * - * Credits: - * This driver would not exist if not for Alan Cox's development - * of the linux i2o driver. - * - * A huge debt of gratitude is owed to David S. Miller (DaveM) - * for fixing much of the stupid and broken stuff in the early - * driver while porting to sparc64 platform. THANK YOU! - * - * (see also mptbase.c) - * - * Copyright (c) 1999-2004 LSI Logic Corporation - * Originally By: Steven J. Ralston - * (mailto:netscape.net) + * Copyright (c) 1999-2005 LSI Logic Corporation * (mailto:mpt_linux_developer@lsil.com) * - * $Id: mptscsih.h,v 1.21 2002/12/03 21:26:35 pdelaney Exp $ */ /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ /* @@ -91,4 +78,30 @@ #define MPTSCSIH_MIN_SYNC 0x08 #define MPTSCSIH_SAF_TE 0 + +#endif + +extern void mptscsih_remove(struct pci_dev *); +extern void mptscsih_shutdown(struct device *); +#ifdef CONFIG_PM +extern int mptscsih_suspend(struct pci_dev *pdev, u32 state); +extern int mptscsih_resume(struct pci_dev *pdev); #endif +extern int mptscsih_proc_info(struct Scsi_Host *host, char *buffer, char **start, off_t offset, int length, int func); +extern const char * mptscsih_info(struct Scsi_Host *SChost); +extern int mptscsih_qcmd(struct scsi_cmnd *SCpnt, void (*done)(struct scsi_cmnd *)); +extern int mptscsih_slave_alloc(struct scsi_device *device); +extern void mptscsih_slave_destroy(struct scsi_device *device); +extern int mptscsih_slave_configure(struct scsi_device *device); +extern int mptscsih_abort(struct scsi_cmnd * SCpnt); +extern int mptscsih_dev_reset(struct scsi_cmnd * SCpnt); +extern int mptscsih_bus_reset(struct scsi_cmnd * SCpnt); +extern int mptscsih_host_reset(struct scsi_cmnd *SCpnt); +extern int mptscsih_bios_param(struct scsi_device * sdev, struct block_device *bdev, sector_t capacity, int geom[]); +extern int mptscsih_io_done(MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf, MPT_FRAME_HDR *r); +extern int mptscsih_taskmgmt_complete(MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf, MPT_FRAME_HDR *r); +extern int mptscsih_scandv_complete(MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf, MPT_FRAME_HDR *r); +extern int mptscsih_event_process(MPT_ADAPTER *ioc, EventNotificationReply_t *pEvReply); +extern int mptscsih_ioc_reset(MPT_ADAPTER *ioc, int post_reset); +extern ssize_t mptscsih_store_queue_depth(struct device *dev, const char *buf, size_t count); +extern void mptscsih_timer_expired(unsigned long data); diff --git a/drivers/message/fusion/mptspi.c b/drivers/message/fusion/mptspi.c new file mode 100644 index 00000000000..5f9a61b85b3 --- /dev/null +++ b/drivers/message/fusion/mptspi.c @@ -0,0 +1,486 @@ +/* + * linux/drivers/message/fusion/mptspi.c + * For use with LSI Logic PCI chip/adapter(s) + * running LSI Logic Fusion MPT (Message Passing Technology) firmware. + * + * Copyright (c) 1999-2005 LSI Logic Corporation + * (mailto:mpt_linux_developer@lsil.com) + * + */ +/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ +/* + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; version 2 of the License. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + NO WARRANTY + THE PROGRAM IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OR + CONDITIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED INCLUDING, WITHOUT + LIMITATION, ANY WARRANTIES OR CONDITIONS OF TITLE, NON-INFRINGEMENT, + MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Each Recipient is + solely responsible for determining the appropriateness of using and + distributing the Program and assumes all risks associated with its + exercise of rights under this Agreement, including but not limited to + the risks and costs of program errors, damage to or loss of data, + programs or equipment, and unavailability or interruption of operations. + + DISCLAIMER OF LIABILITY + NEITHER RECIPIENT NOR ANY CONTRIBUTORS SHALL HAVE ANY LIABILITY FOR ANY + DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + DAMAGES (INCLUDING WITHOUT LIMITATION LOST PROFITS), HOWEVER CAUSED AND + ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR + TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE + USE OR DISTRIBUTION OF THE PROGRAM OR THE EXERCISE OF ANY RIGHTS GRANTED + HEREUNDER, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA +*/ +/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ + +#include "linux_compat.h" /* linux-2.6 tweaks */ +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/errno.h> +#include <linux/kdev_t.h> +#include <linux/blkdev.h> +#include <linux/delay.h> /* for mdelay */ +#include <linux/interrupt.h> /* needed for in_interrupt() proto */ +#include <linux/reboot.h> /* notifier code */ +#include <linux/sched.h> +#include <linux/workqueue.h> + +#include <scsi/scsi.h> +#include <scsi/scsi_cmnd.h> +#include <scsi/scsi_device.h> +#include <scsi/scsi_host.h> +#include <scsi/scsi_tcq.h> + +#include "mptbase.h" +#include "mptscsih.h" + +/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ +#define my_NAME "Fusion MPT SPI Host driver" +#define my_VERSION MPT_LINUX_VERSION_COMMON +#define MYNAM "mptspi" + +MODULE_AUTHOR(MODULEAUTHOR); +MODULE_DESCRIPTION(my_NAME); +MODULE_LICENSE("GPL"); + +/* Command line args */ +#ifdef MPTSCSIH_ENABLE_DOMAIN_VALIDATION +static int mpt_dv = MPTSCSIH_DOMAIN_VALIDATION; +module_param(mpt_dv, int, 0); +MODULE_PARM_DESC(mpt_dv, " DV Algorithm: enhanced=1, basic=0 (default=MPTSCSIH_DOMAIN_VALIDATION=1)"); + +static int mpt_width = MPTSCSIH_MAX_WIDTH; +module_param(mpt_width, int, 0); +MODULE_PARM_DESC(mpt_width, " Max Bus Width: wide=1, narrow=0 (default=MPTSCSIH_MAX_WIDTH=1)"); + +static ushort mpt_factor = MPTSCSIH_MIN_SYNC; +module_param(mpt_factor, ushort, 0); +MODULE_PARM_DESC(mpt_factor, " Min Sync Factor (default=MPTSCSIH_MIN_SYNC=0x08)"); +#endif + +static int mpt_saf_te = MPTSCSIH_SAF_TE; +module_param(mpt_saf_te, int, 0); +MODULE_PARM_DESC(mpt_saf_te, " Force enabling SEP Processor: enable=1 (default=MPTSCSIH_SAF_TE=0)"); + +static int mpt_pq_filter = 0; +module_param(mpt_pq_filter, int, 0); +MODULE_PARM_DESC(mpt_pq_filter, " Enable peripheral qualifier filter: enable=1 (default=0)"); + +static int mptspiDoneCtx = -1; +static int mptspiTaskCtx = -1; +static int mptspiInternalCtx = -1; /* Used only for internal commands */ + +static struct device_attribute mptspi_queue_depth_attr = { + .attr = { + .name = "queue_depth", + .mode = S_IWUSR, + }, + .store = mptscsih_store_queue_depth, +}; + +static struct device_attribute *mptspi_dev_attrs[] = { + &mptspi_queue_depth_attr, + NULL, +}; + +static struct scsi_host_template mptspi_driver_template = { + .proc_name = "mptspi", + .proc_info = mptscsih_proc_info, + .name = "MPT SPI Host", + .info = mptscsih_info, + .queuecommand = mptscsih_qcmd, + .slave_alloc = mptscsih_slave_alloc, + .slave_configure = mptscsih_slave_configure, + .slave_destroy = mptscsih_slave_destroy, + .eh_abort_handler = mptscsih_abort, + .eh_device_reset_handler = mptscsih_dev_reset, + .eh_bus_reset_handler = mptscsih_bus_reset, + .eh_host_reset_handler = mptscsih_host_reset, + .bios_param = mptscsih_bios_param, + .can_queue = MPT_SCSI_CAN_QUEUE, + .this_id = -1, + .sg_tablesize = MPT_SCSI_SG_DEPTH, + .max_sectors = 8192, + .cmd_per_lun = 7, + .use_clustering = ENABLE_CLUSTERING, + .sdev_attrs = mptspi_dev_attrs, +}; + + +/**************************************************************************** + * Supported hardware + */ + +static struct pci_device_id mptspi_pci_table[] = { + { PCI_VENDOR_ID_LSI_LOGIC, PCI_DEVICE_ID_LSI_53C1030, + PCI_ANY_ID, PCI_ANY_ID }, + { PCI_VENDOR_ID_LSI_LOGIC, PCI_DEVICE_ID_LSI_1030_53C1035, + PCI_ANY_ID, PCI_ANY_ID }, + {0} /* Terminating entry */ +}; +MODULE_DEVICE_TABLE(pci, mptspi_pci_table); + +/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ +/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ +/* + * mptspi_probe - Installs scsi devices per bus. + * @pdev: Pointer to pci_dev structure + * + * Returns 0 for success, non-zero for failure. + * + */ +static int +mptspi_probe(struct pci_dev *pdev, const struct pci_device_id *id) +{ + struct Scsi_Host *sh; + MPT_SCSI_HOST *hd; + MPT_ADAPTER *ioc; + unsigned long flags; + int sz, ii; + int numSGE = 0; + int scale; + int ioc_cap; + u8 *mem; + int error=0; + int r; + + if ((r = mpt_attach(pdev,id)) != 0) + return r; + + ioc = pci_get_drvdata(pdev); + ioc->DoneCtx = mptspiDoneCtx; + ioc->TaskCtx = mptspiTaskCtx; + ioc->InternalCtx = mptspiInternalCtx; + + /* Added sanity check on readiness of the MPT adapter. + */ + if (ioc->last_state != MPI_IOC_STATE_OPERATIONAL) { + printk(MYIOC_s_WARN_FMT + "Skipping because it's not operational!\n", + ioc->name); + return -ENODEV; + } + + if (!ioc->active) { + printk(MYIOC_s_WARN_FMT "Skipping because it's disabled!\n", + ioc->name); + return -ENODEV; + } + + /* Sanity check - ensure at least 1 port is INITIATOR capable + */ + ioc_cap = 0; + for (ii=0; ii < ioc->facts.NumberOfPorts; ii++) { + if (ioc->pfacts[ii].ProtocolFlags & + MPI_PORTFACTS_PROTOCOL_INITIATOR) + ioc_cap ++; + } + + if (!ioc_cap) { + printk(MYIOC_s_WARN_FMT + "Skipping ioc=%p because SCSI Initiator mode is NOT enabled!\n", + ioc->name, ioc); + return -ENODEV; + } + + sh = scsi_host_alloc(&mptspi_driver_template, sizeof(MPT_SCSI_HOST)); + + if (!sh) { + printk(MYIOC_s_WARN_FMT + "Unable to register controller with SCSI subsystem\n", + ioc->name); + return -1; + } + + spin_lock_irqsave(&ioc->FreeQlock, flags); + + /* Attach the SCSI Host to the IOC structure + */ + ioc->sh = sh; + + sh->io_port = 0; + sh->n_io_port = 0; + sh->irq = 0; + + /* set 16 byte cdb's */ + sh->max_cmd_len = 16; + + /* Yikes! This is important! + * Otherwise, by default, linux + * only scans target IDs 0-7! + * pfactsN->MaxDevices unreliable + * (not supported in early + * versions of the FW). + * max_id = 1 + actual max id, + * max_lun = 1 + actual last lun, + * see hosts.h :o( + */ + sh->max_id = MPT_MAX_SCSI_DEVICES; + + sh->max_lun = MPT_LAST_LUN + 1; + sh->max_channel = 0; + sh->this_id = ioc->pfacts[0].PortSCSIID; + + /* Required entry. + */ + sh->unique_id = ioc->id; + + /* Verify that we won't exceed the maximum + * number of chain buffers + * We can optimize: ZZ = req_sz/sizeof(SGE) + * For 32bit SGE's: + * numSGE = 1 + (ZZ-1)*(maxChain -1) + ZZ + * + (req_sz - 64)/sizeof(SGE) + * A slightly different algorithm is required for + * 64bit SGEs. + */ + scale = ioc->req_sz/(sizeof(dma_addr_t) + sizeof(u32)); + if (sizeof(dma_addr_t) == sizeof(u64)) { + numSGE = (scale - 1) * + (ioc->facts.MaxChainDepth-1) + scale + + (ioc->req_sz - 60) / (sizeof(dma_addr_t) + + sizeof(u32)); + } else { + numSGE = 1 + (scale - 1) * + (ioc->facts.MaxChainDepth-1) + scale + + (ioc->req_sz - 64) / (sizeof(dma_addr_t) + + sizeof(u32)); + } + + if (numSGE < sh->sg_tablesize) { + /* Reset this value */ + dprintk((MYIOC_s_INFO_FMT + "Resetting sg_tablesize to %d from %d\n", + ioc->name, numSGE, sh->sg_tablesize)); + sh->sg_tablesize = numSGE; + } + + /* Set the pci device pointer in Scsi_Host structure. + */ + scsi_set_device(sh, &ioc->pcidev->dev); + + spin_unlock_irqrestore(&ioc->FreeQlock, flags); + + hd = (MPT_SCSI_HOST *) sh->hostdata; + hd->ioc = ioc; + + /* SCSI needs scsi_cmnd lookup table! + * (with size equal to req_depth*PtrSz!) + */ + sz = ioc->req_depth * sizeof(void *); + mem = kmalloc(sz, GFP_ATOMIC); + if (mem == NULL) { + error = -ENOMEM; + goto mptspi_probe_failed; + } + + memset(mem, 0, sz); + hd->ScsiLookup = (struct scsi_cmnd **) mem; + + dprintk((MYIOC_s_INFO_FMT "ScsiLookup @ %p, sz=%d\n", + ioc->name, hd->ScsiLookup, sz)); + + /* Allocate memory for the device structures. + * A non-Null pointer at an offset + * indicates a device exists. + * max_id = 1 + maximum id (hosts.h) + */ + sz = sh->max_id * sizeof(void *); + mem = kmalloc(sz, GFP_ATOMIC); + if (mem == NULL) { + error = -ENOMEM; + goto mptspi_probe_failed; + } + + memset(mem, 0, sz); + hd->Targets = (VirtDevice **) mem; + + dprintk((KERN_INFO + " Targets @ %p, sz=%d\n", hd->Targets, sz)); + + /* Clear the TM flags + */ + hd->tmPending = 0; + hd->tmState = TM_STATE_NONE; + hd->resetPending = 0; + hd->abortSCpnt = NULL; + + /* Clear the pointer used to store + * single-threaded commands, i.e., those + * issued during a bus scan, dv and + * configuration pages. + */ + hd->cmdPtr = NULL; + + /* Initialize this SCSI Hosts' timers + * To use, set the timer expires field + * and add_timer + */ + init_timer(&hd->timer); + hd->timer.data = (unsigned long) hd; + hd->timer.function = mptscsih_timer_expired; + + ioc->spi_data.Saf_Te = mpt_saf_te; + hd->mpt_pq_filter = mpt_pq_filter; + +#ifdef MPTSCSIH_ENABLE_DOMAIN_VALIDATION + if (ioc->spi_data.maxBusWidth > mpt_width) + ioc->spi_data.maxBusWidth = mpt_width; + if (ioc->spi_data.minSyncFactor < mpt_factor) + ioc->spi_data.minSyncFactor = mpt_factor; + if (ioc->spi_data.minSyncFactor == MPT_ASYNC) { + ioc->spi_data.maxSyncOffset = 0; + } + ioc->spi_data.mpt_dv = mpt_dv; + hd->negoNvram = 0; + + ddvprintk((MYIOC_s_INFO_FMT + "dv %x width %x factor %x saf_te %x mpt_pq_filter %x\n", + ioc->name, + mpt_dv, + mpt_width, + mpt_factor, + mpt_saf_te, + mpt_pq_filter)); +#else + hd->negoNvram = MPT_SCSICFG_USE_NVRAM; + ddvprintk((MYIOC_s_INFO_FMT + "saf_te %x mpt_pq_filter %x\n", + ioc->name, + mpt_saf_te, + mpt_pq_filter)); +#endif + + ioc->spi_data.forceDv = 0; + ioc->spi_data.noQas = 0; + + for (ii=0; ii < MPT_MAX_SCSI_DEVICES; ii++) + ioc->spi_data.dvStatus[ii] = + MPT_SCSICFG_NEGOTIATE; + + for (ii=0; ii < MPT_MAX_SCSI_DEVICES; ii++) + ioc->spi_data.dvStatus[ii] |= + MPT_SCSICFG_DV_NOT_DONE; + + init_waitqueue_head(&hd->scandv_waitq); + hd->scandv_wait_done = 0; + hd->last_queue_full = 0; + + error = scsi_add_host (sh, &ioc->pcidev->dev); + if(error) { + dprintk((KERN_ERR MYNAM + "scsi_add_host failed\n")); + goto mptspi_probe_failed; + } + + scsi_scan_host(sh); + return 0; + +mptspi_probe_failed: + + mptscsih_remove(pdev); + return error; +} + +static struct pci_driver mptspi_driver = { + .name = "mptspi", + .id_table = mptspi_pci_table, + .probe = mptspi_probe, + .remove = __devexit_p(mptscsih_remove), + .driver = { + .shutdown = mptscsih_shutdown, + }, +#ifdef CONFIG_PM + .suspend = mptscsih_suspend, + .resume = mptscsih_resume, +#endif +}; + +/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ +/** + * mptspi_init - Register MPT adapter(s) as SCSI host(s) with + * linux scsi mid-layer. + * + * Returns 0 for success, non-zero for failure. + */ +static int __init +mptspi_init(void) +{ + + show_mptmod_ver(my_NAME, my_VERSION); + + mptspiDoneCtx = mpt_register(mptscsih_io_done, MPTSPI_DRIVER); + mptspiTaskCtx = mpt_register(mptscsih_taskmgmt_complete, MPTSPI_DRIVER); + mptspiInternalCtx = mpt_register(mptscsih_scandv_complete, MPTSPI_DRIVER); + + if (mpt_event_register(mptspiDoneCtx, mptscsih_event_process) == 0) { + devtprintk((KERN_INFO MYNAM + ": Registered for IOC event notifications\n")); + } + + if (mpt_reset_register(mptspiDoneCtx, mptscsih_ioc_reset) == 0) { + dprintk((KERN_INFO MYNAM + ": Registered for IOC reset notifications\n")); + } + + return pci_register_driver(&mptspi_driver); +} + +/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ +/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ +/** + * mptspi_exit - Unregisters MPT adapter(s) + * + */ +static void __exit +mptspi_exit(void) +{ + pci_unregister_driver(&mptspi_driver); + + mpt_reset_deregister(mptspiDoneCtx); + dprintk((KERN_INFO MYNAM + ": Deregistered for IOC reset notifications\n")); + + mpt_event_deregister(mptspiDoneCtx); + dprintk((KERN_INFO MYNAM + ": Deregistered for IOC event notifications\n")); + + mpt_deregister(mptspiInternalCtx); + mpt_deregister(mptspiTaskCtx); + mpt_deregister(mptspiDoneCtx); +} + +module_init(mptspi_init); +module_exit(mptspi_exit); |