diff options
Diffstat (limited to 'drivers/message/i2o/memory.c')
| -rw-r--r-- | drivers/message/i2o/memory.c | 313 |
1 files changed, 313 insertions, 0 deletions
diff --git a/drivers/message/i2o/memory.c b/drivers/message/i2o/memory.c new file mode 100644 index 00000000000..f5cc95c564e --- /dev/null +++ b/drivers/message/i2o/memory.c @@ -0,0 +1,313 @@ +/* + * Functions to handle I2O memory + * + * Pulled from the inlines in i2o headers and uninlined + * + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include <linux/module.h> +#include <linux/i2o.h> +#include <linux/delay.h> +#include <linux/string.h> +#include <linux/slab.h> +#include "core.h" + +/* Protects our 32/64bit mask switching */ +static DEFINE_MUTEX(mem_lock); + +/** + * i2o_sg_tablesize - Calculate the maximum number of elements in a SGL + * @c: I2O controller for which the calculation should be done + * @body_size: maximum body size used for message in 32-bit words. + * + * Return the maximum number of SG elements in a SG list. + */ +u16 i2o_sg_tablesize(struct i2o_controller *c, u16 body_size) +{ + i2o_status_block *sb = c->status_block.virt; + u16 sg_count = + (sb->inbound_frame_size - sizeof(struct i2o_message) / 4) - + body_size; + + if (c->pae_support) { + /* + * for 64-bit a SG attribute element must be added and each + * SG element needs 12 bytes instead of 8. + */ + sg_count -= 2; + sg_count /= 3; + } else + sg_count /= 2; + + if (c->short_req && (sg_count > 8)) + sg_count = 8; + + return sg_count; +} +EXPORT_SYMBOL_GPL(i2o_sg_tablesize); + + +/** + * i2o_dma_map_single - Map pointer to controller and fill in I2O message. + * @c: I2O controller + * @ptr: pointer to the data which should be mapped + * @size: size of data in bytes + * @direction: DMA_TO_DEVICE / DMA_FROM_DEVICE + * @sg_ptr: pointer to the SG list inside the I2O message + * + * This function does all necessary DMA handling and also writes the I2O + * SGL elements into the I2O message. For details on DMA handling see also + * dma_map_single(). The pointer sg_ptr will only be set to the end of the + * SG list if the allocation was successful. + * + * Returns DMA address which must be checked for failures using + * dma_mapping_error(). + */ +dma_addr_t i2o_dma_map_single(struct i2o_controller *c, void *ptr, + size_t size, + enum dma_data_direction direction, + u32 ** sg_ptr) +{ + u32 sg_flags; + u32 *mptr = *sg_ptr; + dma_addr_t dma_addr; + + switch (direction) { + case DMA_TO_DEVICE: + sg_flags = 0xd4000000; + break; + case DMA_FROM_DEVICE: + sg_flags = 0xd0000000; + break; + default: + return 0; + } + + dma_addr = dma_map_single(&c->pdev->dev, ptr, size, direction); + if (!dma_mapping_error(&c->pdev->dev, dma_addr)) { +#ifdef CONFIG_I2O_EXT_ADAPTEC_DMA64 + if ((sizeof(dma_addr_t) > 4) && c->pae_support) { + *mptr++ = cpu_to_le32(0x7C020002); + *mptr++ = cpu_to_le32(PAGE_SIZE); + } +#endif + + *mptr++ = cpu_to_le32(sg_flags | size); + *mptr++ = cpu_to_le32(i2o_dma_low(dma_addr)); +#ifdef CONFIG_I2O_EXT_ADAPTEC_DMA64 + if ((sizeof(dma_addr_t) > 4) && c->pae_support) + *mptr++ = cpu_to_le32(i2o_dma_high(dma_addr)); +#endif + *sg_ptr = mptr; + } + return dma_addr; +} +EXPORT_SYMBOL_GPL(i2o_dma_map_single); + +/** + * i2o_dma_map_sg - Map a SG List to controller and fill in I2O message. + * @c: I2O controller + * @sg: SG list to be mapped + * @sg_count: number of elements in the SG list + * @direction: DMA_TO_DEVICE / DMA_FROM_DEVICE + * @sg_ptr: pointer to the SG list inside the I2O message + * + * This function does all necessary DMA handling and also writes the I2O + * SGL elements into the I2O message. For details on DMA handling see also + * dma_map_sg(). The pointer sg_ptr will only be set to the end of the SG + * list if the allocation was successful. + * + * Returns 0 on failure or 1 on success. + */ +int i2o_dma_map_sg(struct i2o_controller *c, struct scatterlist *sg, + int sg_count, enum dma_data_direction direction, u32 ** sg_ptr) +{ + u32 sg_flags; + u32 *mptr = *sg_ptr; + + switch (direction) { + case DMA_TO_DEVICE: + sg_flags = 0x14000000; + break; + case DMA_FROM_DEVICE: + sg_flags = 0x10000000; + break; + default: + return 0; + } + + sg_count = dma_map_sg(&c->pdev->dev, sg, sg_count, direction); + if (!sg_count) + return 0; + +#ifdef CONFIG_I2O_EXT_ADAPTEC_DMA64 + if ((sizeof(dma_addr_t) > 4) && c->pae_support) { + *mptr++ = cpu_to_le32(0x7C020002); + *mptr++ = cpu_to_le32(PAGE_SIZE); + } +#endif + + while (sg_count-- > 0) { + if (!sg_count) + sg_flags |= 0xC0000000; + *mptr++ = cpu_to_le32(sg_flags | sg_dma_len(sg)); + *mptr++ = cpu_to_le32(i2o_dma_low(sg_dma_address(sg))); +#ifdef CONFIG_I2O_EXT_ADAPTEC_DMA64 + if ((sizeof(dma_addr_t) > 4) && c->pae_support) + *mptr++ = cpu_to_le32(i2o_dma_high(sg_dma_address(sg))); +#endif + sg = sg_next(sg); + } + *sg_ptr = mptr; + + return 1; +} +EXPORT_SYMBOL_GPL(i2o_dma_map_sg); + +/** + * i2o_dma_alloc - Allocate DMA memory + * @dev: struct device pointer to the PCI device of the I2O controller + * @addr: i2o_dma struct which should get the DMA buffer + * @len: length of the new DMA memory + * + * Allocate a coherent DMA memory and write the pointers into addr. + * + * Returns 0 on success or -ENOMEM on failure. + */ +int i2o_dma_alloc(struct device *dev, struct i2o_dma *addr, size_t len) +{ + struct pci_dev *pdev = to_pci_dev(dev); + int dma_64 = 0; + + mutex_lock(&mem_lock); + if ((sizeof(dma_addr_t) > 4) && (pdev->dma_mask == DMA_64BIT_MASK)) { + dma_64 = 1; + if (pci_set_dma_mask(pdev, DMA_32BIT_MASK)) { + mutex_unlock(&mem_lock); + return -ENOMEM; + } + } + + addr->virt = dma_alloc_coherent(dev, len, &addr->phys, GFP_KERNEL); + + if ((sizeof(dma_addr_t) > 4) && dma_64) + if (pci_set_dma_mask(pdev, DMA_64BIT_MASK)) + printk(KERN_WARNING "i2o: unable to set 64-bit DMA"); + mutex_unlock(&mem_lock); + + if (!addr->virt) + return -ENOMEM; + + memset(addr->virt, 0, len); + addr->len = len; + + return 0; +} +EXPORT_SYMBOL_GPL(i2o_dma_alloc); + + +/** + * i2o_dma_free - Free DMA memory + * @dev: struct device pointer to the PCI device of the I2O controller + * @addr: i2o_dma struct which contains the DMA buffer + * + * Free a coherent DMA memory and set virtual address of addr to NULL. + */ +void i2o_dma_free(struct device *dev, struct i2o_dma *addr) +{ + if (addr->virt) { + if (addr->phys) + dma_free_coherent(dev, addr->len, addr->virt, + addr->phys); + else + kfree(addr->virt); + addr->virt = NULL; + } +} +EXPORT_SYMBOL_GPL(i2o_dma_free); + + +/** + * i2o_dma_realloc - Realloc DMA memory + * @dev: struct device pointer to the PCI device of the I2O controller + * @addr: pointer to a i2o_dma struct DMA buffer + * @len: new length of memory + * + * If there was something allocated in the addr, free it first. If len > 0 + * than try to allocate it and write the addresses back to the addr + * structure. If len == 0 set the virtual address to NULL. + * + * Returns the 0 on success or negative error code on failure. + */ +int i2o_dma_realloc(struct device *dev, struct i2o_dma *addr, size_t len) +{ + i2o_dma_free(dev, addr); + + if (len) + return i2o_dma_alloc(dev, addr, len); + + return 0; +} +EXPORT_SYMBOL_GPL(i2o_dma_realloc); + +/* + * i2o_pool_alloc - Allocate an slab cache and mempool + * @mempool: pointer to struct i2o_pool to write data into. + * @name: name which is used to identify cache + * @size: size of each object + * @min_nr: minimum number of objects + * + * First allocates a slab cache with name and size. Then allocates a + * mempool which uses the slab cache for allocation and freeing. + * + * Returns 0 on success or negative error code on failure. + */ +int i2o_pool_alloc(struct i2o_pool *pool, const char *name, + size_t size, int min_nr) +{ + pool->name = kmalloc(strlen(name) + 1, GFP_KERNEL); + if (!pool->name) + goto exit; + strcpy(pool->name, name); + + pool->slab = + kmem_cache_create(pool->name, size, 0, SLAB_HWCACHE_ALIGN, NULL); + if (!pool->slab) + goto free_name; + + pool->mempool = mempool_create_slab_pool(min_nr, pool->slab); + if (!pool->mempool) + goto free_slab; + + return 0; + +free_slab: + kmem_cache_destroy(pool->slab); + +free_name: + kfree(pool->name); + +exit: + return -ENOMEM; +} +EXPORT_SYMBOL_GPL(i2o_pool_alloc); + +/* + * i2o_pool_free - Free slab cache and mempool again + * @mempool: pointer to struct i2o_pool which should be freed + * + * Note that you have to return all objects to the mempool again before + * calling i2o_pool_free(). + */ +void i2o_pool_free(struct i2o_pool *pool) +{ + mempool_destroy(pool->mempool); + kmem_cache_destroy(pool->slab); + kfree(pool->name); +}; +EXPORT_SYMBOL_GPL(i2o_pool_free); |