diff options
Diffstat (limited to 'drivers/message')
34 files changed, 3329 insertions, 1593 deletions
diff --git a/drivers/message/fusion/Kconfig b/drivers/message/fusion/Kconfig index 1883d22cffe..e67cf15e9c3 100644 --- a/drivers/message/fusion/Kconfig +++ b/drivers/message/fusion/Kconfig @@ -23,6 +23,7 @@ config FUSION_FC tristate "Fusion MPT ScsiHost drivers for FC" depends on PCI && SCSI select FUSION + select SCSI_FC_ATTRS ---help--- SCSI HOST support for a Fiber Channel host adapters. diff --git a/drivers/message/fusion/Makefile b/drivers/message/fusion/Makefile index 8a2e2657f4c..33ace373241 100644 --- a/drivers/message/fusion/Makefile +++ b/drivers/message/fusion/Makefile @@ -29,6 +29,8 @@ # For mptctl: #CFLAGS_mptctl.o += -DMPT_DEBUG_IOCTL # +# For mptfc: +#CFLAGS_mptfc.o += -DMPT_DEBUG_FC #=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-} LSI_LOGIC diff --git a/drivers/message/fusion/lsi/mpi.h b/drivers/message/fusion/lsi/mpi.h index b61e3d17507..02cdc840a06 100644 --- a/drivers/message/fusion/lsi/mpi.h +++ b/drivers/message/fusion/lsi/mpi.h @@ -6,7 +6,7 @@ * Title: MPI Message independent structures and definitions * Creation Date: July 27, 2000 * - * mpi.h Version: 01.05.08 + * mpi.h Version: 01.05.10 * * Version History * --------------- @@ -74,6 +74,8 @@ * 06-24-05 01.05.08 Added function codes for SCSI IO 32 and * TargetAssistExtended requests. * Added EEDP IOCStatus codes. + * 08-03-05 01.05.09 Bumped MPI_HEADER_VERSION_UNIT. + * 08-30-05 01.05.10 Added 2 new IOCStatus codes for Target. * -------------------------------------------------------------------------- */ @@ -104,7 +106,7 @@ /* Note: The major versions of 0xe0 through 0xff are reserved */ /* versioning for this MPI header set */ -#define MPI_HEADER_VERSION_UNIT (0x0A) +#define MPI_HEADER_VERSION_UNIT (0x0C) #define MPI_HEADER_VERSION_DEV (0x00) #define MPI_HEADER_VERSION_UNIT_MASK (0xFF00) #define MPI_HEADER_VERSION_UNIT_SHIFT (8) @@ -711,6 +713,8 @@ typedef struct _MSG_DEFAULT_REPLY #define MPI_IOCSTATUS_TARGET_DATA_OFFSET_ERROR (0x006D) #define MPI_IOCSTATUS_TARGET_TOO_MUCH_WRITE_DATA (0x006E) #define MPI_IOCSTATUS_TARGET_IU_TOO_SHORT (0x006F) +#define MPI_IOCSTATUS_TARGET_ACK_NAK_TIMEOUT (0x0070) +#define MPI_IOCSTATUS_TARGET_NAK_RECEIVED (0x0071) /****************************************************************************/ /* Additional FCP target values (obsolete) */ @@ -745,7 +749,7 @@ typedef struct _MSG_DEFAULT_REPLY #define MPI_IOCSTATUS_LAN_CANCELED (0x0087) /****************************************************************************/ -/* Serial Attached SCSI values */ +/* Serial Attached SCSI values */ /****************************************************************************/ #define MPI_IOCSTATUS_SAS_SMP_REQUEST_FAILED (0x0090) diff --git a/drivers/message/fusion/lsi/mpi_cnfg.h b/drivers/message/fusion/lsi/mpi_cnfg.h index d8339896f73..b1becec27e1 100644 --- a/drivers/message/fusion/lsi/mpi_cnfg.h +++ b/drivers/message/fusion/lsi/mpi_cnfg.h @@ -6,7 +6,7 @@ * Title: MPI Config message, structures, and Pages * Creation Date: July 27, 2000 * - * mpi_cnfg.h Version: 01.05.09 + * mpi_cnfg.h Version: 01.05.11 * * Version History * --------------- @@ -249,6 +249,23 @@ * Added OwnerDevHandle and Flags field to SAS PHY Page 0. * Added IOC GPIO Flags define to SAS Enclosure Page 0. * Fixed the value for MPI_SAS_IOUNIT1_CONTROL_DEV_SATA_SUPPORT. + * 08-03-05 01.05.10 Removed ISDataScrubRate and ISResyncRate from + * Manufacturing Page 4. + * Added MPI_IOUNITPAGE1_SATA_WRITE_CACHE_DISABLE bit. + * Added NumDevsPerEnclosure field to SAS IO Unit page 2. + * Added MPI_SAS_IOUNIT2_FLAGS_HOST_ASSIGNED_PHYS_MAP + * define. + * Added EnclosureHandle field to SAS Expander page 0. + * Removed redundant NumTableEntriesProg field from SAS + * Expander Page 1. + * 08-30-05 01.05.11 Added DeviceID for FC949E and changed the DeviceID for + * SAS1078. + * Added more defines for Manufacturing Page 4 Flags field. + * Added more defines for IOCSettings and added + * ExpanderSpinup field to Bios Page 1. + * Added postpone SATA Init bit to SAS IO Unit Page 1 + * ControlFlags. + * Changed LogEntry format for Log Page 0. * -------------------------------------------------------------------------- */ @@ -494,7 +511,7 @@ typedef struct _MSG_CONFIG_REPLY #define MPI_MANUFACTPAGE_DEVICEID_FC929X (0x0626) #define MPI_MANUFACTPAGE_DEVICEID_FC939X (0x0642) #define MPI_MANUFACTPAGE_DEVICEID_FC949X (0x0640) -#define MPI_MANUFACTPAGE_DEVICEID_FC949ES (0x0646) +#define MPI_MANUFACTPAGE_DEVICEID_FC949E (0x0646) /* SCSI */ #define MPI_MANUFACTPAGE_DEVID_53C1030 (0x0030) #define MPI_MANUFACTPAGE_DEVID_53C1030ZC (0x0031) @@ -510,7 +527,7 @@ typedef struct _MSG_CONFIG_REPLY #define MPI_MANUFACTPAGE_DEVID_SAS1066E (0x005A) #define MPI_MANUFACTPAGE_DEVID_SAS1068 (0x0054) #define MPI_MANUFACTPAGE_DEVID_SAS1068E (0x0058) -#define MPI_MANUFACTPAGE_DEVID_SAS1078 (0x0060) +#define MPI_MANUFACTPAGE_DEVID_SAS1078 (0x0062) typedef struct _CONFIG_PAGE_MANUFACTURING_0 @@ -602,9 +619,7 @@ typedef struct _CONFIG_PAGE_MANUFACTURING_4 U32 IMVolumeSettings; /* 50h */ U32 Reserved3; /* 54h */ U32 Reserved4; /* 58h */ - U8 ISDataScrubRate; /* 5Ch */ - U8 ISResyncRate; /* 5Dh */ - U16 Reserved5; /* 5Eh */ + U32 Reserved5; /* 5Ch */ U8 IMEDataScrubRate; /* 60h */ U8 IMEResyncRate; /* 61h */ U16 Reserved6; /* 62h */ @@ -616,9 +631,14 @@ typedef struct _CONFIG_PAGE_MANUFACTURING_4 } CONFIG_PAGE_MANUFACTURING_4, MPI_POINTER PTR_CONFIG_PAGE_MANUFACTURING_4, ManufacturingPage4_t, MPI_POINTER pManufacturingPage4_t; -#define MPI_MANUFACTURING4_PAGEVERSION (0x02) +#define MPI_MANUFACTURING4_PAGEVERSION (0x03) /* defines for the Flags field */ +#define MPI_MANPAGE4_IME_DISABLE (0x20) +#define MPI_MANPAGE4_IM_DISABLE (0x10) +#define MPI_MANPAGE4_IS_DISABLE (0x08) +#define MPI_MANPAGE4_IR_MODEPAGE8_DISABLE (0x04) +#define MPI_MANPAGE4_IM_RESYNC_CACHE_ENABLE (0x02) #define MPI_MANPAGE4_IR_NO_MIX_SAS_SATA (0x01) @@ -669,7 +689,7 @@ typedef struct _CONFIG_PAGE_IO_UNIT_1 } CONFIG_PAGE_IO_UNIT_1, MPI_POINTER PTR_CONFIG_PAGE_IO_UNIT_1, IOUnitPage1_t, MPI_POINTER pIOUnitPage1_t; -#define MPI_IOUNITPAGE1_PAGEVERSION (0x01) +#define MPI_IOUNITPAGE1_PAGEVERSION (0x02) /* IO Unit Page 1 Flags defines */ #define MPI_IOUNITPAGE1_MULTI_FUNCTION (0x00000000) @@ -681,7 +701,7 @@ typedef struct _CONFIG_PAGE_IO_UNIT_1 #define MPI_IOUNITPAGE1_DISABLE_IR (0x00000040) #define MPI_IOUNITPAGE1_FORCE_32 (0x00000080) #define MPI_IOUNITPAGE1_NATIVE_COMMAND_Q_DISABLE (0x00000100) - +#define MPI_IOUNITPAGE1_SATA_WRITE_CACHE_DISABLE (0x00000200) typedef struct _MPI_ADAPTER_INFO { @@ -968,7 +988,8 @@ typedef struct _CONFIG_PAGE_BIOS_1 U32 Reserved1; /* 0Ch */ U32 DeviceSettings; /* 10h */ U16 NumberOfDevices; /* 14h */ - U16 Reserved2; /* 16h */ + U8 ExpanderSpinup; /* 16h */ + U8 Reserved2; /* 17h */ U16 IOTimeoutBlockDevicesNonRM; /* 18h */ U16 IOTimeoutSequential; /* 1Ah */ U16 IOTimeoutOther; /* 1Ch */ @@ -976,7 +997,7 @@ typedef struct _CONFIG_PAGE_BIOS_1 } CONFIG_PAGE_BIOS_1, MPI_POINTER PTR_CONFIG_PAGE_BIOS_1, BIOSPage1_t, MPI_POINTER pBIOSPage1_t; -#define MPI_BIOSPAGE1_PAGEVERSION (0x02) +#define MPI_BIOSPAGE1_PAGEVERSION (0x03) /* values for the BiosOptions field */ #define MPI_BIOSPAGE1_OPTIONS_SPI_ENABLE (0x00000400) @@ -985,8 +1006,15 @@ typedef struct _CONFIG_PAGE_BIOS_1 #define MPI_BIOSPAGE1_OPTIONS_DISABLE_BIOS (0x00000001) /* values for the IOCSettings field */ +#define MPI_BIOSPAGE1_IOCSET_MASK_INITIAL_SPINUP_DELAY (0x0F000000) +#define MPI_BIOSPAGE1_IOCSET_SHIFT_INITIAL_SPINUP_DELAY (24) + #define MPI_BIOSPAGE1_IOCSET_MASK_PORT_ENABLE_DELAY (0x00F00000) #define MPI_BIOSPAGE1_IOCSET_SHIFT_PORT_ENABLE_DELAY (20) + +#define MPI_BIOSPAGE1_IOCSET_AUTO_PORT_ENABLE (0x00080000) +#define MPI_BIOSPAGE1_IOCSET_DIRECT_ATTACH_SPINUP_MODE (0x00040000) + #define MPI_BIOSPAGE1_IOCSET_MASK_BOOT_PREFERENCE (0x00030000) #define MPI_BIOSPAGE1_IOCSET_ENCLOSURE_SLOT_BOOT (0x00000000) #define MPI_BIOSPAGE1_IOCSET_SAS_ADDRESS_BOOT (0x00010000) @@ -1016,6 +1044,11 @@ typedef struct _CONFIG_PAGE_BIOS_1 #define MPI_BIOSPAGE1_DEVSET_DISABLE_NON_RM_LUN (0x00000002) #define MPI_BIOSPAGE1_DEVSET_DISABLE_OTHER_LUN (0x00000001) +/* defines for the ExpanderSpinup field */ +#define MPI_BIOSPAGE1_EXPSPINUP_MASK_MAX_TARGET (0xF0) +#define MPI_BIOSPAGE1_EXPSPINUP_SHIFT_MAX_TARGET (4) +#define MPI_BIOSPAGE1_EXPSPINUP_MASK_DELAY (0x0F) + typedef struct _MPI_BOOT_DEVICE_ADAPTER_ORDER { U32 Reserved1; /* 00h */ @@ -1233,13 +1266,13 @@ typedef struct _CONFIG_PAGE_SCSI_PORT_0 #define MPI_SCSIPORTPAGE0_CAP_SHIFT_MIN_SYNC_PERIOD (8) #define MPI_SCSIPORTPAGE0_CAP_GET_MIN_SYNC_PERIOD(Cap) \ - ( ((Cap) & MPI_SCSIPORTPAGE0_CAP_MASK_MIN_SYNC_PERIOD) \ + ( ((Cap) & MPI_SCSIPORTPAGE0_CAP_MIN_SYNC_PERIOD_MASK) \ >> MPI_SCSIPORTPAGE0_CAP_SHIFT_MIN_SYNC_PERIOD \ ) #define MPI_SCSIPORTPAGE0_CAP_MAX_SYNC_OFFSET_MASK (0x00FF0000) #define MPI_SCSIPORTPAGE0_CAP_SHIFT_MAX_SYNC_OFFSET (16) #define MPI_SCSIPORTPAGE0_CAP_GET_MAX_SYNC_OFFSET(Cap) \ - ( ((Cap) & MPI_SCSIPORTPAGE0_CAP_MASK_MAX_SYNC_OFFSET) \ + ( ((Cap) & MPI_SCSIPORTPAGE0_CAP_MAX_SYNC_OFFSET_MASK) \ >> MPI_SCSIPORTPAGE0_CAP_SHIFT_MAX_SYNC_OFFSET \ ) #define MPI_SCSIPORTPAGE0_CAP_IDP (0x08000000) @@ -2370,47 +2403,48 @@ typedef struct _CONFIG_PAGE_SAS_IO_UNIT_1 } CONFIG_PAGE_SAS_IO_UNIT_1, MPI_POINTER PTR_CONFIG_PAGE_SAS_IO_UNIT_1, SasIOUnitPage1_t, MPI_POINTER pSasIOUnitPage1_t; -#define MPI_SASIOUNITPAGE1_PAGEVERSION (0x04) +#define MPI_SASIOUNITPAGE1_PAGEVERSION (0x05) /* values for SAS IO Unit Page 1 ControlFlags */ -#define MPI_SAS_IOUNIT1_CONTROL_DEVICE_SELF_TEST (0x8000) -#define MPI_SAS_IOUNIT1_CONTROL_SATA_3_0_MAX (0x4000) -#define MPI_SAS_IOUNIT1_CONTROL_SATA_1_5_MAX (0x2000) -#define MPI_SAS_IOUNIT1_CONTROL_SATA_SW_PRESERVE (0x1000) -#define MPI_SAS_IOUNIT1_CONTROL_DISABLE_SAS_HASH (0x0800) - -#define MPI_SAS_IOUNIT1_CONTROL_MASK_DEV_SUPPORT (0x0600) -#define MPI_SAS_IOUNIT1_CONTROL_SHIFT_DEV_SUPPORT (9) -#define MPI_SAS_IOUNIT1_CONTROL_DEV_SUPPORT_BOTH (0x00) -#define MPI_SAS_IOUNIT1_CONTROL_DEV_SAS_SUPPORT (0x01) -#define MPI_SAS_IOUNIT1_CONTROL_DEV_SATA_SUPPORT (0x02) - -#define MPI_SAS_IOUNIT1_CONTROL_SATA_48BIT_LBA_REQUIRED (0x0080) -#define MPI_SAS_IOUNIT1_CONTROL_SATA_SMART_REQUIRED (0x0040) -#define MPI_SAS_IOUNIT1_CONTROL_SATA_NCQ_REQUIRED (0x0020) -#define MPI_SAS_IOUNIT1_CONTROL_SATA_FUA_REQUIRED (0x0010) -#define MPI_SAS_IOUNIT1_CONTROL_PHY_ENABLE_ORDER_HIGH (0x0008) -#define MPI_SAS_IOUNIT1_CONTROL_SUBTRACTIVE_ILLEGAL (0x0004) -#define MPI_SAS_IOUNIT1_CONTROL_FIRST_LVL_DISC_ONLY (0x0002) -#define MPI_SAS_IOUNIT1_CONTROL_CLEAR_AFFILIATION (0x0001) +#define MPI_SAS_IOUNIT1_CONTROL_DEVICE_SELF_TEST (0x8000) +#define MPI_SAS_IOUNIT1_CONTROL_SATA_3_0_MAX (0x4000) +#define MPI_SAS_IOUNIT1_CONTROL_SATA_1_5_MAX (0x2000) +#define MPI_SAS_IOUNIT1_CONTROL_SATA_SW_PRESERVE (0x1000) +#define MPI_SAS_IOUNIT1_CONTROL_DISABLE_SAS_HASH (0x0800) + +#define MPI_SAS_IOUNIT1_CONTROL_MASK_DEV_SUPPORT (0x0600) +#define MPI_SAS_IOUNIT1_CONTROL_SHIFT_DEV_SUPPORT (9) +#define MPI_SAS_IOUNIT1_CONTROL_DEV_SUPPORT_BOTH (0x00) +#define MPI_SAS_IOUNIT1_CONTROL_DEV_SAS_SUPPORT (0x01) +#define MPI_SAS_IOUNIT1_CONTROL_DEV_SATA_SUPPORT (0x02) + +#define MPI_SAS_IOUNIT1_CONTROL_POSTPONE_SATA_INIT (0x0100) +#define MPI_SAS_IOUNIT1_CONTROL_SATA_48BIT_LBA_REQUIRED (0x0080) +#define MPI_SAS_IOUNIT1_CONTROL_SATA_SMART_REQUIRED (0x0040) +#define MPI_SAS_IOUNIT1_CONTROL_SATA_NCQ_REQUIRED (0x0020) +#define MPI_SAS_IOUNIT1_CONTROL_SATA_FUA_REQUIRED (0x0010) +#define MPI_SAS_IOUNIT1_CONTROL_PHY_ENABLE_ORDER_HIGH (0x0008) +#define MPI_SAS_IOUNIT1_CONTROL_SUBTRACTIVE_ILLEGAL (0x0004) +#define MPI_SAS_IOUNIT1_CONTROL_FIRST_LVL_DISC_ONLY (0x0002) +#define MPI_SAS_IOUNIT1_CONTROL_CLEAR_AFFILIATION (0x0001) /* values for SAS IO Unit Page 1 PortFlags */ -#define MPI_SAS_IOUNIT1_PORT_FLAGS_0_TARGET_IOC_NUM (0x00) -#define MPI_SAS_IOUNIT1_PORT_FLAGS_1_TARGET_IOC_NUM (0x04) -#define MPI_SAS_IOUNIT1_PORT_FLAGS_AUTO_PORT_CONFIG (0x01) +#define MPI_SAS_IOUNIT1_PORT_FLAGS_0_TARGET_IOC_NUM (0x00) +#define MPI_SAS_IOUNIT1_PORT_FLAGS_1_TARGET_IOC_NUM (0x04) +#define MPI_SAS_IOUNIT1_PORT_FLAGS_AUTO_PORT_CONFIG (0x01) /* values for SAS IO Unit Page 0 PhyFlags */ -#define MPI_SAS_IOUNIT1_PHY_FLAGS_PHY_DISABLE (0x04) -#define MPI_SAS_IOUNIT1_PHY_FLAGS_TX_INVERT (0x02) -#define MPI_SAS_IOUNIT1_PHY_FLAGS_RX_INVERT (0x01) +#define MPI_SAS_IOUNIT1_PHY_FLAGS_PHY_DISABLE (0x04) +#define MPI_SAS_IOUNIT1_PHY_FLAGS_TX_INVERT (0x02) +#define MPI_SAS_IOUNIT1_PHY_FLAGS_RX_INVERT (0x01) /* values for SAS IO Unit Page 0 MaxMinLinkRate */ -#define MPI_SAS_IOUNIT1_MAX_RATE_MASK (0xF0) -#define MPI_SAS_IOUNIT1_MAX_RATE_1_5 (0x80) -#define MPI_SAS_IOUNIT1_MAX_RATE_3_0 (0x90) -#define MPI_SAS_IOUNIT1_MIN_RATE_MASK (0x0F) -#define MPI_SAS_IOUNIT1_MIN_RATE_1_5 (0x08) -#define MPI_SAS_IOUNIT1_MIN_RATE_3_0 (0x09) +#define MPI_SAS_IOUNIT1_MAX_RATE_MASK (0xF0) +#define MPI_SAS_IOUNIT1_MAX_RATE_1_5 (0x80) +#define MPI_SAS_IOUNIT1_MAX_RATE_3_0 (0x90) +#define MPI_SAS_IOUNIT1_MIN_RATE_MASK (0x0F) +#define MPI_SAS_IOUNIT1_MIN_RATE_1_5 (0x08) +#define MPI_SAS_IOUNIT1_MIN_RATE_3_0 (0x09) /* see mpi_sas.h for values for SAS IO Unit Page 1 ControllerPhyDeviceInfo values */ @@ -2418,16 +2452,18 @@ typedef struct _CONFIG_PAGE_SAS_IO_UNIT_1 typedef struct _CONFIG_PAGE_SAS_IO_UNIT_2 { CONFIG_EXTENDED_PAGE_HEADER Header; /* 00h */ - U32 Reserved1; /* 08h */ + U8 NumDevsPerEnclosure; /* 08h */ + U8 Reserved1; /* 09h */ + U16 Reserved2; /* 0Ah */ U16 MaxPersistentIDs; /* 0Ch */ U16 NumPersistentIDsUsed; /* 0Eh */ U8 Status; /* 10h */ U8 Flags; /* 11h */ - U16 MaxNumPhysicalMappedIDs;/* 12h */ /* 12h */ + U16 MaxNumPhysicalMappedIDs;/* 12h */ } CONFIG_PAGE_SAS_IO_UNIT_2, MPI_POINTER PTR_CONFIG_PAGE_SAS_IO_UNIT_2, SasIOUnitPage2_t, MPI_POINTER pSasIOUnitPage2_t; -#define MPI_SASIOUNITPAGE2_PAGEVERSION (0x04) +#define MPI_SASIOUNITPAGE2_PAGEVERSION (0x05) /* values for SAS IO Unit Page 2 Status field */ #define MPI_SAS_IOUNIT2_STATUS_DISABLED_PERSISTENT_MAPPINGS (0x02) @@ -2441,6 +2477,7 @@ typedef struct _CONFIG_PAGE_SAS_IO_UNIT_2 #define MPI_SAS_IOUNIT2_FLAGS_NO_PHYS_MAP (0x00) #define MPI_SAS_IOUNIT2_FLAGS_DIRECT_ATTACH_PHYS_MAP (0x01) #define MPI_SAS_IOUNIT2_FLAGS_ENCLOSURE_SLOT_PHYS_MAP (0x02) +#define MPI_SAS_IOUNIT2_FLAGS_HOST_ASSIGNED_PHYS_MAP (0x07) #define MPI_SAS_IOUNIT2_FLAGS_RESERVE_ID_0_FOR_BOOT (0x10) #define MPI_SAS_IOUNIT2_FLAGS_DA_STARTING_SLOT (0x20) @@ -2473,7 +2510,7 @@ typedef struct _CONFIG_PAGE_SAS_EXPANDER_0 CONFIG_EXTENDED_PAGE_HEADER Header; /* 00h */ U8 PhysicalPort; /* 08h */ U8 Reserved1; /* 09h */ - U16 Reserved2; /* 0Ah */ + U16 EnclosureHandle; /* 0Ah */ U64 SASAddress; /* 0Ch */ U32 DiscoveryStatus; /* 14h */ U16 DevHandle; /* 18h */ @@ -2487,7 +2524,7 @@ typedef struct _CONFIG_PAGE_SAS_EXPANDER_0 } CONFIG_PAGE_SAS_EXPANDER_0, MPI_POINTER PTR_CONFIG_PAGE_SAS_EXPANDER_0, SasExpanderPage0_t, MPI_POINTER pSasExpanderPage0_t; -#define MPI_SASEXPANDER0_PAGEVERSION (0x02) +#define MPI_SASEXPANDER0_PAGEVERSION (0x03) /* values for SAS Expander Page 0 DiscoveryStatus field */ #define MPI_SAS_EXPANDER0_DS_LOOP_DETECTED (0x00000001) @@ -2527,9 +2564,9 @@ typedef struct _CONFIG_PAGE_SAS_EXPANDER_1 U8 NegotiatedLinkRate; /* 1Fh */ U8 PhyIdentifier; /* 20h */ U8 AttachedPhyIdentifier; /* 21h */ - U8 NumTableEntriesProg; /* 22h */ + U8 Reserved3; /* 22h */ U8 DiscoveryInfo; /* 23h */ - U32 Reserved3; /* 24h */ + U32 Reserved4; /* 24h */ } CONFIG_PAGE_SAS_EXPANDER_1, MPI_POINTER PTR_CONFIG_PAGE_SAS_EXPANDER_1, SasExpanderPage1_t, MPI_POINTER pSasExpanderPage1_t; @@ -2766,16 +2803,15 @@ typedef struct _CONFIG_PAGE_SAS_ENCLOSURE_0 #define MPI_LOG_0_NUM_LOG_ENTRIES (1) #endif -#define MPI_LOG_0_LOG_DATA_LENGTH (20) +#define MPI_LOG_0_LOG_DATA_LENGTH (0x1C) typedef struct _MPI_LOG_0_ENTRY { - U64 WWID; /* 00h */ - U32 TimeStamp; /* 08h */ - U32 Reserved1; /* 0Ch */ - U16 LogSequence; /* 10h */ - U16 LogEntryQualifier; /* 12h */ - U8 LogData[MPI_LOG_0_LOG_DATA_LENGTH]; /* 14h */ + U32 TimeStamp; /* 00h */ + U32 Reserved1; /* 04h */ + U16 LogSequence; /* 08h */ + U16 LogEntryQualifier; /* 0Ah */ + U8 LogData[MPI_LOG_0_LOG_DATA_LENGTH]; /* 0Ch */ } MPI_LOG_0_ENTRY, MPI_POINTER PTR_MPI_LOG_0_ENTRY, MpiLog0Entry_t, MPI_POINTER pMpiLog0Entry_t; @@ -2794,7 +2830,7 @@ typedef struct _CONFIG_PAGE_LOG_0 } CONFIG_PAGE_LOG_0, MPI_POINTER PTR_CONFIG_PAGE_LOG_0, LogPage0_t, MPI_POINTER pLogPage0_t; -#define MPI_LOG_0_PAGEVERSION (0x00) +#define MPI_LOG_0_PAGEVERSION (0x01) #endif diff --git a/drivers/message/fusion/lsi/mpi_history.txt b/drivers/message/fusion/lsi/mpi_history.txt index 1a30ef16adb..4a5f8dd1d76 100644 --- a/drivers/message/fusion/lsi/mpi_history.txt +++ b/drivers/message/fusion/lsi/mpi_history.txt @@ -6,25 +6,25 @@ Copyright (c) 2000-2005 LSI Logic Corporation. --------------------------------------- - Header Set Release Version: 01.05.10 - Header Set Release Date: 03-11-05 + Header Set Release Version: 01.05.12 + Header Set Release Date: 08-30-05 --------------------------------------- Filename Current version Prior version ---------- --------------- ------------- - mpi.h 01.05.08 01.05.07 - mpi_ioc.h 01.05.09 01.05.08 - mpi_cnfg.h 01.05.09 01.05.08 - mpi_init.h 01.05.05 01.05.04 - mpi_targ.h 01.05.05 01.05.04 + mpi.h 01.05.10 01.05.09 + mpi_ioc.h 01.05.10 01.05.09 + mpi_cnfg.h 01.05.11 01.05.10 + mpi_init.h 01.05.06 01.05.06 + mpi_targ.h 01.05.05 01.05.05 mpi_fc.h 01.05.01 01.05.01 mpi_lan.h 01.05.01 01.05.01 mpi_raid.h 01.05.02 01.05.02 mpi_tool.h 01.05.03 01.05.03 mpi_inb.h 01.05.01 01.05.01 - mpi_sas.h 01.05.01 01.05.01 - mpi_type.h 01.05.01 01.05.01 - mpi_history.txt 01.05.09 01.05.09 + mpi_sas.h 01.05.02 01.05.01 + mpi_type.h 01.05.02 01.05.01 + mpi_history.txt 01.05.12 01.05.11 * Date Version Description @@ -91,6 +91,8 @@ mpi.h * 06-24-05 01.05.08 Added function codes for SCSI IO 32 and * TargetAssistExtended requests. * Added EEDP IOCStatus codes. + * 08-03-05 01.05.09 Bumped MPI_HEADER_VERSION_UNIT. + * 08-30-05 01.05.10 Added 2 new IOCStatus codes for Target. * -------------------------------------------------------------------------- mpi_ioc.h @@ -164,6 +166,10 @@ mpi_ioc.h * Removed IOCFacts Reply EEDP Capability bit. * 06-24-05 01.05.09 Added 5 new IOCFacts Reply IOCCapabilities bits. * Added Max SATA Targets to SAS Discovery Error event. + * 08-30-05 01.05.10 Added 4 new events and their event data structures. + * Added new ReasonCode value for SAS Device Status Change + * event. + * Added new family code for FC949E. * -------------------------------------------------------------------------- mpi_cnfg.h @@ -402,6 +408,23 @@ mpi_cnfg.h * Added OwnerDevHandle and Flags field to SAS PHY Page 0. * Added IOC GPIO Flags define to SAS Enclosure Page 0. * Fixed the value for MPI_SAS_IOUNIT1_CONTROL_DEV_SATA_SUPPORT. + * 08-03-05 01.05.10 Removed ISDataScrubRate and ISResyncRate from + * Manufacturing Page 4. + * Added MPI_IOUNITPAGE1_SATA_WRITE_CACHE_DISABLE bit. + * Added NumDevsPerEnclosure field to SAS IO Unit page 2. + * Added MPI_SAS_IOUNIT2_FLAGS_HOST_ASSIGNED_PHYS_MAP + * define. + * Added EnclosureHandle field to SAS Expander page 0. + * Removed redundant NumTableEntriesProg field from SAS + * Expander Page 1. + * 08-30-05 01.05.11 Added DeviceID for FC949E and changed the DeviceID for + * SAS1078. + * Added more defines for Manufacturing Page 4 Flags field. + * Added more defines for IOCSettings and added + * ExpanderSpinup field to Bios Page 1. + * Added postpone SATA Init bit to SAS IO Unit Page 1 + * ControlFlags. + * Changed LogEntry format for Log Page 0. * -------------------------------------------------------------------------- mpi_init.h @@ -442,6 +465,8 @@ mpi_init.h * addressing. * 06-24-05 01.05.05 Added SCSI IO 32 structures and defines. * Added four new defines for SEP SlotStatus. + * 08-03-05 01.05.06 Fixed some MPI_SCSIIO32_MSGFLGS_ defines to make them + * unique in the first 32 characters. * -------------------------------------------------------------------------- mpi_targ.h @@ -582,6 +607,9 @@ mpi_inb.h mpi_sas.h * 08-19-04 01.05.01 Original release. + * 08-30-05 01.05.02 Added DeviceInfo bit for SEP. + * Added PrimFlags and Primitive field to SAS IO Unit + * Control request, and added a new operation code. * -------------------------------------------------------------------------- mpi_type.h @@ -592,24 +620,25 @@ mpi_type.h * 08-08-01 01.02.01 Original release for v1.2 work. * 05-11-04 01.03.01 Original release for MPI v1.3. * 08-19-04 01.05.01 Original release for MPI v1.5. + * 08-30-05 01.05.02 Added PowerPC option to #ifdef's. * -------------------------------------------------------------------------- mpi_history.txt Parts list history -Filename 01.05.10 01.05.09 ----------- -------- -------- -mpi.h 01.05.08 01.05.07 -mpi_ioc.h 01.05.09 01.05.08 -mpi_cnfg.h 01.05.09 01.05.08 -mpi_init.h 01.05.05 01.05.04 -mpi_targ.h 01.05.05 01.05.04 -mpi_fc.h 01.05.01 01.05.01 -mpi_lan.h 01.05.01 01.05.01 -mpi_raid.h 01.05.02 01.05.02 -mpi_tool.h 01.05.03 01.05.03 -mpi_inb.h 01.05.01 01.05.01 -mpi_sas.h 01.05.01 01.05.01 -mpi_type.h 01.05.01 01.05.01 +Filename 01.05.12 01.05.11 01.05.10 01.05.09 +---------- -------- -------- -------- -------- +mpi.h 01.05.10 01.05.09 01.05.08 01.05.07 +mpi_ioc.h 01.05.10 01.05.09 01.05.09 01.05.08 +mpi_cnfg.h 01.05.11 01.05.10 01.05.09 01.05.08 +mpi_init.h 01.05.06 01.05.06 01.05.05 01.05.04 +mpi_targ.h 01.05.05 01.05.05 01.05.05 01.05.04 +mpi_fc.h 01.05.01 01.05.01 01.05.01 01.05.01 +mpi_lan.h 01.05.01 01.05.01 01.05.01 01.05.01 +mpi_raid.h 01.05.02 01.05.02 01.05.02 01.05.02 +mpi_tool.h 01.05.03 01.05.03 01.05.03 01.05.03 +mpi_inb.h 01.05.01 01.05.01 01.05.01 01.05.01 +mpi_sas.h 01.05.02 01.05.01 01.05.01 01.05.01 +mpi_type.h 01.05.02 01.05.01 01.05.01 01.05.01 Filename 01.05.08 01.05.07 01.05.06 01.05.05 01.05.04 01.05.03 ---------- -------- -------- -------- -------- -------- -------- diff --git a/drivers/message/fusion/lsi/mpi_init.h b/drivers/message/fusion/lsi/mpi_init.h index d5af75afbd9..68941f459ca 100644 --- a/drivers/message/fusion/lsi/mpi_init.h +++ b/drivers/message/fusion/lsi/mpi_init.h @@ -6,7 +6,7 @@ * Title: MPI initiator mode messages and structures * Creation Date: June 8, 2000 * - * mpi_init.h Version: 01.05.05 + * mpi_init.h Version: 01.05.06 * * Version History * --------------- @@ -50,6 +50,8 @@ * addressing. * 06-24-05 01.05.05 Added SCSI IO 32 structures and defines. * Added four new defines for SEP SlotStatus. + * 08-03-05 01.05.06 Fixed some MPI_SCSIIO32_MSGFLGS_ defines to make them + * unique in the first 32 characters. * -------------------------------------------------------------------------- */ @@ -290,8 +292,8 @@ typedef struct _MSG_SCSI_IO32_REQUEST /* SCSI IO 32 MsgFlags bits */ #define MPI_SCSIIO32_MSGFLGS_SENSE_WIDTH (0x01) -#define MPI_SCSIIO32_MSGFLGS_SENSE_WIDTH_32 (0x00) -#define MPI_SCSIIO32_MSGFLGS_SENSE_WIDTH_64 (0x01) +#define MPI_SCSIIO32_MSGFLGS_32_SENSE_WIDTH (0x00) +#define MPI_SCSIIO32_MSGFLGS_64_SENSE_WIDTH (0x01) #define MPI_SCSIIO32_MSGFLGS_SENSE_LOCATION (0x02) #define MPI_SCSIIO32_MSGFLGS_SENSE_LOC_HOST (0x00) diff --git a/drivers/message/fusion/lsi/mpi_ioc.h b/drivers/message/fusion/lsi/mpi_ioc.h index 93b70e2b426..2c5f43fa7c7 100644 --- a/drivers/message/fusion/lsi/mpi_ioc.h +++ b/drivers/message/fusion/lsi/mpi_ioc.h @@ -6,7 +6,7 @@ * Title: MPI IOC, Port, Event, FW Download, and FW Upload messages * Creation Date: August 11, 2000 * - * mpi_ioc.h Version: 01.05.09 + * mpi_ioc.h Version: 01.05.10 * * Version History * --------------- @@ -83,6 +83,10 @@ * Removed IOCFacts Reply EEDP Capability bit. * 06-24-05 01.05.09 Added 5 new IOCFacts Reply IOCCapabilities bits. * Added Max SATA Targets to SAS Discovery Error event. + * 08-30-05 01.05.10 Added 4 new events and their event data structures. + * Added new ReasonCode value for SAS Device Status Change + * event. + * Added new family code for FC949E. * -------------------------------------------------------------------------- */ @@ -464,6 +468,10 @@ typedef struct _MSG_EVENT_ACK_REPLY #define MPI_EVENT_PERSISTENT_TABLE_FULL (0x00000011) #define MPI_EVENT_SAS_PHY_LINK_STATUS (0x00000012) #define MPI_EVENT_SAS_DISCOVERY_ERROR (0x00000013) +#define MPI_EVENT_IR_RESYNC_UPDATE (0x00000014) +#define MPI_EVENT_IR2 (0x00000015) +#define MPI_EVENT_SAS_DISCOVERY (0x00000016) +#define MPI_EVENT_LOG_ENTRY_ADDED (0x00000021) /* AckRequired field values */ @@ -480,6 +488,29 @@ typedef struct _EVENT_DATA_EVENT_CHANGE } EVENT_DATA_EVENT_CHANGE, MPI_POINTER PTR_EVENT_DATA_EVENT_CHANGE, EventDataEventChange_t, MPI_POINTER pEventDataEventChange_t; +/* LogEntryAdded Event data */ + +/* this structure matches MPI_LOG_0_ENTRY in mpi_cnfg.h */ +#define MPI_EVENT_DATA_LOG_ENTRY_DATA_LENGTH (0x1C) +typedef struct _EVENT_DATA_LOG_ENTRY +{ + U32 TimeStamp; /* 00h */ + U32 Reserved1; /* 04h */ + U16 LogSequence; /* 08h */ + U16 LogEntryQualifier; /* 0Ah */ + U8 LogData[MPI_EVENT_DATA_LOG_ENTRY_DATA_LENGTH]; /* 0Ch */ +} EVENT_DATA_LOG_ENTRY, MPI_POINTER PTR_EVENT_DATA_LOG_ENTRY, + MpiEventDataLogEntry_t, MPI_POINTER pMpiEventDataLogEntry_t; + +typedef struct _EVENT_DATA_LOG_ENTRY_ADDED +{ + U16 LogSequence; /* 00h */ + U16 Reserved1; /* 02h */ + U32 Reserved2; /* 04h */ + EVENT_DATA_LOG_ENTRY LogEntry; /* 08h */ +} EVENT_DATA_LOG_ENTRY_ADDED, MPI_POINTER PTR_EVENT_DATA_LOG_ENTRY_ADDED, + MpiEventDataLogEntryAdded_t, MPI_POINTER pMpiEventDataLogEntryAdded_t; + /* SCSI Event data for Port, Bus and Device forms */ typedef struct _EVENT_DATA_SCSI @@ -538,6 +569,7 @@ typedef struct _EVENT_DATA_SAS_DEVICE_STATUS_CHANGE #define MPI_EVENT_SAS_DEV_STAT_RC_SMART_DATA (0x05) #define MPI_EVENT_SAS_DEV_STAT_RC_NO_PERSIST_ADDED (0x06) #define MPI_EVENT_SAS_DEV_STAT_RC_UNSUPPORTED (0x07) +#define MPI_EVENT_SAS_DEV_STAT_RC_INTERNAL_DEVICE_RESET (0x08) /* SCSI Event data for Queue Full event */ @@ -579,6 +611,79 @@ typedef struct _EVENT_DATA_RAID #define MPI_EVENT_RAID_RC_SMART_DATA (0x0A) #define MPI_EVENT_RAID_RC_REPLACE_ACTION_STARTED (0x0B) + +/* MPI Integrated RAID Resync Update Event data */ + +typedef struct _MPI_EVENT_DATA_IR_RESYNC_UPDATE +{ + U8 VolumeID; /* 00h */ + U8 VolumeBus; /* 01h */ + U8 ResyncComplete; /* 02h */ + U8 Reserved1; /* 03h */ + U32 Reserved2; /* 04h */ +} MPI_EVENT_DATA_IR_RESYNC_UPDATE, + MPI_POINTER PTR_MPI_EVENT_DATA_IR_RESYNC_UPDATE, + MpiEventDataIrResyncUpdate_t, MPI_POINTER pMpiEventDataIrResyncUpdate_t; + +/* MPI IR2 Event data */ + +/* MPI_LD_STATE or MPI_PD_STATE */ +typedef struct _IR2_STATE_CHANGED +{ + U16 PreviousState; /* 00h */ + U16 NewState; /* 02h */ +} IR2_STATE_CHANGED, MPI_POINTER PTR_IR2_STATE_CHANGED; + +typedef struct _IR2_PD_INFO +{ + U16 DeviceHandle; /* 00h */ + U8 TruncEnclosureHandle; /* 02h */ + U8 TruncatedSlot; /* 03h */ +} IR2_PD_INFO, MPI_POINTER PTR_IR2_PD_INFO; + +typedef union _MPI_IR2_RC_EVENT_DATA +{ + IR2_STATE_CHANGED StateChanged; + U32 Lba; + IR2_PD_INFO PdInfo; +} MPI_IR2_RC_EVENT_DATA, MPI_POINTER PTR_MPI_IR2_RC_EVENT_DATA; + +typedef struct _MPI_EVENT_DATA_IR2 +{ + U8 TargetID; /* 00h */ + U8 Bus; /* 01h */ + U8 ReasonCode; /* 02h */ + U8 PhysDiskNum; /* 03h */ + MPI_IR2_RC_EVENT_DATA IR2EventData; /* 04h */ +} MPI_EVENT_DATA_IR2, MPI_POINTER PTR_MPI_EVENT_DATA_IR2, + MpiEventDataIR2_t, MPI_POINTER pMpiEventDataIR2_t; + +/* MPI IR2 Event data ReasonCode values */ +#define MPI_EVENT_IR2_RC_LD_STATE_CHANGED (0x01) +#define MPI_EVENT_IR2_RC_PD_STATE_CHANGED (0x02) +#define MPI_EVENT_IR2_RC_BAD_BLOCK_TABLE_FULL (0x03) +#define MPI_EVENT_IR2_RC_PD_INSERTED (0x04) +#define MPI_EVENT_IR2_RC_PD_REMOVED (0x05) +#define MPI_EVENT_IR2_RC_FOREIGN_CFG_DETECTED (0x06) +#define MPI_EVENT_IR2_RC_REBUILD_MEDIUM_ERROR (0x07) + +/* defines for logical disk states */ +#define MPI_LD_STATE_OPTIMAL (0x00) +#define MPI_LD_STATE_DEGRADED (0x01) +#define MPI_LD_STATE_FAILED (0x02) +#define MPI_LD_STATE_MISSING (0x03) +#define MPI_LD_STATE_OFFLINE (0x04) + +/* defines for physical disk states */ +#define MPI_PD_STATE_ONLINE (0x00) +#define MPI_PD_STATE_MISSING (0x01) +#define MPI_PD_STATE_NOT_COMPATIBLE (0x02) +#define MPI_PD_STATE_FAILED (0x03) +#define MPI_PD_STATE_INITIALIZING (0x04) +#define MPI_PD_STATE_OFFLINE_AT_HOST_REQUEST (0x05) +#define MPI_PD_STATE_FAILED_AT_HOST_REQUEST (0x06) +#define MPI_PD_STATE_OFFLINE_FOR_ANOTHER_REASON (0xFF) + /* MPI Link Status Change Event data */ typedef struct _EVENT_DATA_LINK_STATUS @@ -660,6 +765,20 @@ typedef struct _EVENT_DATA_SAS_PHY_LINK_STATUS #define MPI_EVENT_SAS_PLS_LR_RATE_1_5 (0x08) #define MPI_EVENT_SAS_PLS_LR_RATE_3_0 (0x09) +/* SAS Discovery Event data */ + +typedef struct _EVENT_DATA_SAS_DISCOVERY +{ + U32 DiscoveryStatus; /* 00h */ + U32 Reserved1; /* 04h */ +} EVENT_DATA_SAS_DISCOVERY, MPI_POINTER PTR_EVENT_DATA_SAS_DISCOVERY, + EventDataSasDiscovery_t, MPI_POINTER pEventDataSasDiscovery_t; + +#define MPI_EVENT_SAS_DSCVRY_COMPLETE (0x00000000) +#define MPI_EVENT_SAS_DSCVRY_IN_PROGRESS (0x00000001) +#define MPI_EVENT_SAS_DSCVRY_PHY_BITS_MASK (0xFFFF0000) +#define MPI_EVENT_SAS_DSCVRY_PHY_BITS_SHIFT (16) + /* SAS Discovery Errror Event data */ typedef struct _EVENT_DATA_DISCOVERY_ERROR @@ -869,6 +988,7 @@ typedef struct _MPI_FW_HEADER #define MPI_FW_HEADER_PID_FAMILY_919XL_FC (0x0003) /* 919XL and 929XL */ #define MPI_FW_HEADER_PID_FAMILY_939X_FC (0x0004) /* 939X and 949X */ #define MPI_FW_HEADER_PID_FAMILY_959_FC (0x0005) +#define MPI_FW_HEADER_PID_FAMILY_949E_FC (0x0006) /* SAS */ #define MPI_FW_HEADER_PID_FAMILY_1064_SAS (0x0001) #define MPI_FW_HEADER_PID_FAMILY_1068_SAS (0x0002) diff --git a/drivers/message/fusion/lsi/mpi_log_fc.h b/drivers/message/fusion/lsi/mpi_log_fc.h new file mode 100644 index 00000000000..dc98d46f907 --- /dev/null +++ b/drivers/message/fusion/lsi/mpi_log_fc.h @@ -0,0 +1,89 @@ +/* + * Copyright (c) 2000-2001 LSI Logic Corporation. All rights reserved. + * + * NAME: fc_log.h + * SUMMARY: MPI IocLogInfo definitions for the SYMFC9xx chips + * DESCRIPTION: Contains the enumerated list of values that may be returned + * in the IOCLogInfo field of a MPI Default Reply Message. + * + * CREATION DATE: 6/02/2000 + * ID: $Id: fc_log.h,v 4.6 2001/07/26 14:41:33 sschremm Exp $ + */ + + +/* + * MpiIocLogInfo_t enum + * + * These 32 bit values are used in the IOCLogInfo field of the MPI reply + * messages. + * The value is 0xabcccccc where + * a = The type of log info as per the MPI spec. Since these codes are + * all for Fibre Channel this value will always be 2. + * b = Specifies a subclass of the firmware where + * 0 = FCP Initiator + * 1 = FCP Target + * 2 = LAN + * 3 = MPI Message Layer + * 4 = FC Link + * 5 = Context Manager + * 6 = Invalid Field Offset + * 7 = State Change Info + * all others are reserved for future use + * c = A specific value within the subclass. + * + * NOTE: Any new values should be added to the end of each subclass so that the + * codes remain consistent across firmware releases. + */ +typedef enum _MpiIocLogInfoFc +{ + MPI_IOCLOGINFO_FC_INIT_BASE = 0x20000000, + MPI_IOCLOGINFO_FC_INIT_ERROR_OUT_OF_ORDER_FRAME = 0x20000001, /* received an out of order frame - unsupported */ + MPI_IOCLOGINFO_FC_INIT_ERROR_BAD_START_OF_FRAME = 0x20000002, /* Bad Rx Frame, bad start of frame primative */ + MPI_IOCLOGINFO_FC_INIT_ERROR_BAD_END_OF_FRAME = 0x20000003, /* Bad Rx Frame, bad end of frame primative */ + MPI_IOCLOGINFO_FC_INIT_ERROR_OVER_RUN = 0x20000004, /* Bad Rx Frame, overrun */ + MPI_IOCLOGINFO_FC_INIT_ERROR_RX_OTHER = 0x20000005, /* Other errors caught by IOC which require retries */ + MPI_IOCLOGINFO_FC_INIT_ERROR_SUBPROC_DEAD = 0x20000006, /* Main processor could not initialize sub-processor */ + MPI_IOCLOGINFO_FC_INIT_ERROR_RX_OVERRUN = 0x20000007, /* Scatter Gather overrun */ + MPI_IOCLOGINFO_FC_INIT_ERROR_RX_BAD_STATUS = 0x20000008, /* Receiver detected context mismatch via invalid header */ + MPI_IOCLOGINFO_FC_INIT_ERROR_RX_UNEXPECTED_FRAME= 0x20000009, /* CtxMgr detected unsupported frame type */ + MPI_IOCLOGINFO_FC_INIT_ERROR_LINK_FAILURE = 0x2000000A, /* Link failure occurred */ + MPI_IOCLOGINFO_FC_INIT_ERROR_TX_TIMEOUT = 0x2000000B, /* Transmitter timeout error */ + + MPI_IOCLOGINFO_FC_TARGET_BASE = 0x21000000, + MPI_IOCLOGINFO_FC_TARGET_NO_PDISC = 0x21000001, /* not sent because we are waiting for a PDISC from the initiator */ + MPI_IOCLOGINFO_FC_TARGET_NO_LOGIN = 0x21000002, /* not sent because we are not logged in to the remote node */ + MPI_IOCLOGINFO_FC_TARGET_DOAR_KILLED_BY_LIP = 0x21000003, /* Data Out, Auto Response, not sent due to a LIP */ + MPI_IOCLOGINFO_FC_TARGET_DIAR_KILLED_BY_LIP = 0x21000004, /* Data In, Auto Response, not sent due to a LIP */ + MPI_IOCLOGINFO_FC_TARGET_DIAR_MISSING_DATA = 0x21000005, /* Data In, Auto Response, missing data frames */ + MPI_IOCLOGINFO_FC_TARGET_DONR_KILLED_BY_LIP = 0x21000006, /* Data Out, No Response, not sent due to a LIP */ + MPI_IOCLOGINFO_FC_TARGET_WRSP_KILLED_BY_LIP = 0x21000007, /* Auto-response after a write not sent due to a LIP */ + MPI_IOCLOGINFO_FC_TARGET_DINR_KILLED_BY_LIP = 0x21000008, /* Data In, No Response, not completed due to a LIP */ + MPI_IOCLOGINFO_FC_TARGET_DINR_MISSING_DATA = 0x21000009, /* Data In, No Response, missing data frames */ + MPI_IOCLOGINFO_FC_TARGET_MRSP_KILLED_BY_LIP = 0x2100000a, /* Manual Response not sent due to a LIP */ + MPI_IOCLOGINFO_FC_TARGET_NO_CLASS_3 = 0x2100000b, /* not sent because remote node does not support Class 3 */ + MPI_IOCLOGINFO_FC_TARGET_LOGIN_NOT_VALID = 0x2100000c, /* not sent because login to remote node not validated */ + MPI_IOCLOGINFO_FC_TARGET_FROM_OUTBOUND = 0x2100000e, /* cleared from the outbound queue after a logout */ + MPI_IOCLOGINFO_FC_TARGET_WAITING_FOR_DATA_IN = 0x2100000f, /* cleared waiting for data after a logout */ + + MPI_IOCLOGINFO_FC_LAN_BASE = 0x22000000, + MPI_IOCLOGINFO_FC_LAN_TRANS_SGL_MISSING = 0x22000001, /* Transaction Context Sgl Missing */ + MPI_IOCLOGINFO_FC_LAN_TRANS_WRONG_PLACE = 0x22000002, /* Transaction Context found before an EOB */ + MPI_IOCLOGINFO_FC_LAN_TRANS_RES_BITS_SET = 0x22000003, /* Transaction Context value has reserved bits set */ + MPI_IOCLOGINFO_FC_LAN_WRONG_SGL_FLAG = 0x22000004, /* Invalid SGL Flags */ + + MPI_IOCLOGINFO_FC_MSG_BASE = 0x23000000, + + MPI_IOCLOGINFO_FC_LINK_BASE = 0x24000000, + MPI_IOCLOGINFO_FC_LINK_LOOP_INIT_TIMEOUT = 0x24000001, /* Loop initialization timed out */ + MPI_IOCLOGINFO_FC_LINK_ALREADY_INITIALIZED = 0x24000002, /* Another system controller already initialized the loop */ + MPI_IOCLOGINFO_FC_LINK_LINK_NOT_ESTABLISHED = 0x24000003, /* Not synchronized to signal or still negotiating (possible cable problem) */ + MPI_IOCLOGINFO_FC_LINK_CRC_ERROR = 0x24000004, /* CRC check detected error on received frame */ + + MPI_IOCLOGINFO_FC_CTX_BASE = 0x25000000, + + MPI_IOCLOGINFO_FC_INVALID_FIELD_BYTE_OFFSET = 0x26000000, /* The lower 24 bits give the byte offset of the field in the request message that is invalid */ + MPI_IOCLOGINFO_FC_INVALID_FIELD_MAX_OFFSET = 0x26ffffff, + + MPI_IOCLOGINFO_FC_STATE_CHANGE = 0x27000000 /* The lower 24 bits give additional information concerning state change */ + +} MpiIocLogInfoFc_t; diff --git a/drivers/message/fusion/lsi/mpi_log_sas.h b/drivers/message/fusion/lsi/mpi_log_sas.h new file mode 100644 index 00000000000..9259d1ad6e6 --- /dev/null +++ b/drivers/message/fusion/lsi/mpi_log_sas.h @@ -0,0 +1,162 @@ + +/*************************************************************************** + * * + * Copyright 2003 LSI Logic Corporation. All rights reserved. * + * * + * This file is confidential and a trade secret of LSI Logic. The * + * receipt of or possession of this file does not convey any rights to * + * reproduce or disclose its contents or to manufacture, use, or sell * + * anything it may describe, in whole, or in part, without the specific * + * written consent of LSI Logic Corporation. * + * * + *************************************************************************** + * + * Name: iopiIocLogInfo.h + * Title: SAS Firmware IOP Interface IOC Log Info Definitions + * Programmer: Guy Kendall + * Creation Date: September 24, 2003 + * + * Version History + * --------------- + * + * Last Updated + * ------------- + * Version %version: 22 % + * Date Updated %date_modified: % + * Programmer %created_by: nperucca % + * + * Date Who Description + * -------- --- ------------------------------------------------------- + * 09/24/03 GWK Initial version + * + * + * Description + * ------------ + * This include file contains SAS firmware interface IOC Log Info codes + * + *------------------------------------------------------------------------- + */ + +#ifndef IOPI_IOCLOGINFO_H_INCLUDED +#define IOPI_IOCLOGINFO_H_INCLUDED + + +/****************************************************************************/ +/* IOC LOGINFO defines, 0x00000000 - 0x0FFFFFFF */ +/* Format: */ +/* Bits 31-28: MPI_IOCLOGINFO_TYPE_SAS (3) */ +/* Bits 27-24: IOC_LOGINFO_ORIGINATOR: 0=IOP, 1=PL, 2=IR */ +/* Bits 23-16: LOGINFO_CODE */ +/* Bits 15-0: LOGINFO_CODE Specific */ +/****************************************************************************/ + +/****************************************************************************/ +/* IOC_LOGINFO_ORIGINATOR defines */ +/****************************************************************************/ +#define IOC_LOGINFO_ORIGINATOR_IOP (0x00000000) +#define IOC_LOGINFO_ORIGINATOR_PL (0x01000000) +#define IOC_LOGINFO_ORIGINATOR_IR (0x02000000) + +/****************************************************************************/ +/* LOGINFO_CODE defines */ +/****************************************************************************/ +#define IOC_LOGINFO_CODE_MASK (0x00FF0000) +#define IOC_LOGINFO_CODE_SHIFT (16) + +/****************************************************************************/ +/* IOP LOGINFO_CODE defines, valid if IOC_LOGINFO_ORIGINATOR = IOP */ +/****************************************************************************/ +#define IOP_LOGINFO_CODE_INVALID_SAS_ADDRESS (0x00010000) +#define IOP_LOGINFO_CODE_UNUSED2 (0x00020000) +#define IOP_LOGINFO_CODE_CONFIG_INVALID_PAGE (0x00030000) +#define IOP_LOGINFO_CODE_CONFIG_INVALID_PAGE_RT (0x00030100) /* Route Table Entry not found */ +#define IOP_LOGINFO_CODE_CONFIG_INVALID_PAGE_PN (0x00030200) /* Invalid Page Number */ +#define IOP_LOGINFO_CODE_CONFIG_INVALID_PAGE_FORM (0x00030300) /* Invalid FORM */ +#define IOP_LOGINFO_CODE_CONFIG_INVALID_PAGE_PT (0x00030400) /* Invalid Page Type */ +#define IOP_LOGINFO_CODE_CONFIG_INVALID_PAGE_DNM (0x00030500) /* Device Not Mapped */ +#define IOP_LOGINFO_CODE_CONFIG_INVALID_PAGE_PERSIST (0x00030600) /* Persistent Page not found */ +#define IOP_LOGINFO_CODE_CONFIG_INVALID_PAGE_DEFAULT (0x00030700) /* Default Page not found */ +#define IOP_LOGINFO_CODE_TASK_TERMINATED (0x00050000) + + +/****************************************************************************/ +/* PL LOGINFO_CODE defines, valid if IOC_LOGINFO_ORIGINATOR = PL */ +/****************************************************************************/ +#define PL_LOGINFO_CODE_OPEN_FAILURE (0x00010000) +#define PL_LOGINFO_CODE_INVALID_SGL (0x00020000) +#define PL_LOGINFO_CODE_WRONG_REL_OFF_OR_FRAME_LENGTH (0x00030000) +#define PL_LOGINFO_CODE_FRAME_XFER_ERROR (0x00040000) +#define PL_LOGINFO_CODE_TX_FM_CONNECTED_LOW (0x00050000) +#define PL_LOGINFO_CODE_SATA_NON_NCQ_RW_ERR_BIT_SET (0x00060000) +#define PL_LOGINFO_CODE_SATA_READ_LOG_RECEIVE_DATA_ERR (0x00070000) +#define PL_LOGINFO_CODE_SATA_NCQ_FAIL_ALL_CMDS_AFTR_ERR (0x00080000) +#define PL_LOGINFO_CODE_SATA_ERR_IN_RCV_SET_DEV_BIT_FIS (0x00090000) +#define PL_LOGINFO_CODE_RX_FM_INVALID_MESSAGE (0x000A0000) +#define PL_LOGINFO_CODE_RX_CTX_MESSAGE_VALID_ERROR (0x000B0000) +#define PL_LOGINFO_CODE_RX_FM_CURRENT_FRAME_ERROR (0x000C0000) +#define PL_LOGINFO_CODE_SATA_LINK_DOWN (0x000D0000) +#define PL_LOGINFO_CODE_DISCOVERY_SATA_INIT_W_IOS (0x000E0000) +#define PL_LOGINFO_CODE_CONFIG_INVALID_PAGE (0x000F0000) +#define PL_LOGINFO_CODE_CONFIG_INVALID_PAGE_PT (0x000F0100) /* Invalid Page Type */ +#define PL_LOGINFO_CODE_CONFIG_INVALID_PAGE_NUM_PHYS (0x000F0200) /* Invalid Number of Phys */ +#define PL_LOGINFO_CODE_CONFIG_INVALID_PAGE_NOT_IMP (0x000F0300) /* Case Not Handled */ +#define PL_LOGINFO_CODE_CONFIG_INVALID_PAGE_NO_DEV (0x000F0400) /* No Device Found */ +#define PL_LOGINFO_CODE_CONFIG_INVALID_PAGE_FORM (0x000F0500) /* Invalid FORM */ +#define PL_LOGINFO_CODE_CONFIG_INVALID_PAGE_PHY (0x000F0600) /* Invalid Phy */ +#define PL_LOGINFO_CODE_CONFIG_INVALID_PAGE_NO_OWNER (0x000F0700) /* No Owner Found */ +#define PL_LOGINFO_CODE_DSCVRY_SATA_INIT_TIMEOUT (0x00100000) +#define PL_LOGINFO_CODE_RESET (0x00110000) +#define PL_LOGINFO_CODE_ABORT (0x00120000) +#define PL_LOGINFO_CODE_IO_NOT_YET_EXECUTED (0x00130000) +#define PL_LOGINFO_CODE_IO_EXECUTED (0x00140000) +#define PL_LOGINFO_SUB_CODE_OPEN_FAILURE (0x00000100) +#define PL_LOGINFO_SUB_CODE_INVALID_SGL (0x00000200) +#define PL_LOGINFO_SUB_CODE_WRONG_REL_OFF_OR_FRAME_LENGTH (0x00000300) +#define PL_LOGINFO_SUB_CODE_FRAME_XFER_ERROR (0x00000400) +#define PL_LOGINFO_SUB_CODE_TX_FM_CONNECTED_LOW (0x00000500) +#define PL_LOGINFO_SUB_CODE_SATA_NON_NCQ_RW_ERR_BIT_SET (0x00000600) +#define PL_LOGINFO_SUB_CODE_SATA_READ_LOG_RECEIVE_DATA_ERR (0x00000700) +#define PL_LOGINFO_SUB_CODE_SATA_NCQ_FAIL_ALL_CMDS_AFTR_ERR (0x00000800) +#define PL_LOGINFO_SUB_CODE_SATA_ERR_IN_RCV_SET_DEV_BIT_FIS (0x00000900) +#define PL_LOGINFO_SUB_CODE_RX_FM_INVALID_MESSAGE (0x00000A00) +#define PL_LOGINFO_SUB_CODE_RX_CTX_MESSAGE_VALID_ERROR (0x00000B00) +#define PL_LOGINFO_SUB_CODE_RX_FM_CURRENT_FRAME_ERROR (0x00000C00) +#define PL_LOGINFO_SUB_CODE_SATA_LINK_DOWN (0x00000D00) +#define PL_LOGINFO_SUB_CODE_DISCOVERY_SATA_INIT_W_IOS (0x00000E00) +#define PL_LOGINFO_SUB_CODE_DSCVRY_SATA_INIT_TIMEOUT (0x00001000) + + +#define PL_LOGINFO_CODE_ENCL_MGMT_SMP_FRAME_FAILURE (0x00200000) /* Can't get SMP Frame */ +#define PL_LOGINFO_CODE_ENCL_MGMT_SMP_READ_ERROR (0x00200001) /* Error occured on SMP Read */ +#define PL_LOGINFO_CODE_ENCL_MGMT_SMP_WRITE_ERROR (0x00200002) /* Error occured on SMP Write */ +#define PL_LOGINFO_CODE_ENCL_MGMT_NOT_SUPPORTED_ON_ENCL (0x00200004) /* Encl Mgmt services not available for this WWID */ +#define PL_LOGINFO_CODE_ENCL_MGMT_ADDR_MODE_NOT_SUPPORTED (0x00200005) /* Address Mode not suppored */ +#define PL_LOGINFO_CODE_ENCL_MGMT_BAD_SLOT_NUM (0x00200006) /* Invalid Slot Number in SEP Msg */ +#define PL_LOGINFO_CODE_ENCL_MGMT_SGPIO_NOT_PRESENT (0x00200007) /* SGPIO not present/enabled */ + +#define PL_LOGINFO_DA_SEP_NOT_PRESENT (0x00200100) /* SEP not present when msg received */ +#define PL_LOGINFO_DA_SEP_SINGLE_THREAD_ERROR (0x00200101) /* Can only accept 1 msg at a time */ +#define PL_LOGINFO_DA_SEP_ISTWI_INTR_IN_IDLE_STATE (0x00200102) /* ISTWI interrupt recvd. while IDLE */ +#define PL_LOGINFO_DA_SEP_RECEIVED_NACK_FROM_SLAVE (0x00200103) /* SEP NACK'd, it is busy */ +#define PL_LOGINFO_DA_SEP_BAD_STATUS_HDR_CHKSUM (0x00200104) /* SEP stopped or sent bad chksum in Hdr */ +#define PL_LOGINFO_DA_SEP_UNSUPPORTED_SCSI_STATUS_1 (0x00200105) /* SEP returned unknown scsi status */ +#define PL_LOGINFO_DA_SEP_UNSUPPORTED_SCSI_STATUS_2 (0x00200106) /* SEP returned unknown scsi status */ +#define PL_LOGINFO_DA_SEP_CHKSUM_ERROR_AFTER_STOP (0x00200107) /* SEP returned bad chksum after STOP */ +#define PL_LOGINFO_DA_SEP_CHKSUM_ERROR_AFTER_STOP_GETDATA (0x00200108) /* SEP returned bad chksum after STOP while gettin data*/ + + +/****************************************************************************/ +/* IR LOGINFO_CODE defines, valid if IOC_LOGINFO_ORIGINATOR = IR */ +/****************************************************************************/ +#define IR_LOGINFO_CODE_UNUSED1 (0x00010000) +#define IR_LOGINFO_CODE_UNUSED2 (0x00020000) + +/****************************************************************************/ +/* Defines for convienence */ +/****************************************************************************/ +#define IOC_LOGINFO_PREFIX_IOP ((MPI_IOCLOGINFO_TYPE_SAS << MPI_IOCLOGINFO_TYPE_SHIFT) | IOC_LOGINFO_ORIGINATOR_IOP) +#define IOC_LOGINFO_PREFIX_PL ((MPI_IOCLOGINFO_TYPE_SAS << MPI_IOCLOGINFO_TYPE_SHIFT) | IOC_LOGINFO_ORIGINATOR_PL) +#define IOC_LOGINFO_PREFIX_IR ((MPI_IOCLOGINFO_TYPE_SAS << MPI_IOCLOGINFO_TYPE_SHIFT) | IOC_LOGINFO_ORIGINATOR_IR) + +#endif /* end of file */ + diff --git a/drivers/message/fusion/lsi/mpi_sas.h b/drivers/message/fusion/lsi/mpi_sas.h index 230fa69b535..70514867bdd 100644 --- a/drivers/message/fusion/lsi/mpi_sas.h +++ b/drivers/message/fusion/lsi/mpi_sas.h @@ -6,7 +6,7 @@ * Title: MPI Serial Attached SCSI structures and definitions * Creation Date: August 19, 2004 * - * mpi_sas.h Version: 01.05.01 + * mpi_sas.h Version: 01.05.02 * * Version History * --------------- @@ -14,6 +14,9 @@ * Date Version Description * -------- -------- ------------------------------------------------------ * 08-19-04 01.05.01 Original release. + * 08-30-05 01.05.02 Added DeviceInfo bit for SEP. + * Added PrimFlags and Primitive field to SAS IO Unit + * Control request, and added a new operation code. * -------------------------------------------------------------------------- */ @@ -51,6 +54,7 @@ * Values for the SAS DeviceInfo field used in SAS Device Status Change Event * data and SAS IO Unit Configuration pages. */ +#define MPI_SAS_DEVICE_INFO_SEP (0x00004000) #define MPI_SAS_DEVICE_INFO_ATAPI_DEVICE (0x00002000) #define MPI_SAS_DEVICE_INFO_LSI_DEVICE (0x00001000) #define MPI_SAS_DEVICE_INFO_DIRECT_ATTACH (0x00000800) @@ -212,20 +216,26 @@ typedef struct _MSG_SAS_IOUNIT_CONTROL_REQUEST U8 TargetID; /* 0Ch */ U8 Bus; /* 0Dh */ U8 PhyNum; /* 0Eh */ - U8 Reserved4; /* 0Fh */ - U32 Reserved5; /* 10h */ + U8 PrimFlags; /* 0Fh */ + U32 Primitive; /* 10h */ U64 SASAddress; /* 14h */ - U32 Reserved6; /* 1Ch */ + U32 Reserved4; /* 1Ch */ } MSG_SAS_IOUNIT_CONTROL_REQUEST, MPI_POINTER PTR_MSG_SAS_IOUNIT_CONTROL_REQUEST, SasIoUnitControlRequest_t, MPI_POINTER pSasIoUnitControlRequest_t; /* values for the Operation field */ -#define MPI_SAS_OP_CLEAR_NOT_PRESENT (0x01) -#define MPI_SAS_OP_CLEAR_ALL_PERSISTENT (0x02) -#define MPI_SAS_OP_PHY_LINK_RESET (0x06) -#define MPI_SAS_OP_PHY_HARD_RESET (0x07) -#define MPI_SAS_OP_PHY_CLEAR_ERROR_LOG (0x08) -#define MPI_SAS_OP_MAP_CURRENT (0x09) +#define MPI_SAS_OP_CLEAR_NOT_PRESENT (0x01) +#define MPI_SAS_OP_CLEAR_ALL_PERSISTENT (0x02) +#define MPI_SAS_OP_PHY_LINK_RESET (0x06) +#define MPI_SAS_OP_PHY_HARD_RESET (0x07) +#define MPI_SAS_OP_PHY_CLEAR_ERROR_LOG (0x08) +#define MPI_SAS_OP_MAP_CURRENT (0x09) +#define MPI_SAS_OP_SEND_PRIMITIVE (0x0A) + +/* values for the PrimFlags field */ +#define MPI_SAS_PRIMFLAGS_SINGLE (0x08) +#define MPI_SAS_PRIMFLAGS_TRIPLE (0x02) +#define MPI_SAS_PRIMFLAGS_REDUNDANT (0x01) /* SAS IO Unit Control Reply */ diff --git a/drivers/message/fusion/mptbase.c b/drivers/message/fusion/mptbase.c index 4262a22adc2..9a2c7605d49 100644 --- a/drivers/message/fusion/mptbase.c +++ b/drivers/message/fusion/mptbase.c @@ -81,6 +81,10 @@ MODULE_LICENSE("GPL"); /* * cmd line parameters */ +static int mpt_msi_enable; +module_param(mpt_msi_enable, int, 0); +MODULE_PARM_DESC(mpt_msi_enable, " MSI Support Enable (default=0)"); + #ifdef MFCNT static int mfcounter = 0; #define PRINT_MF_COUNT 20000 @@ -148,7 +152,6 @@ static int WaitForDoorbellAck(MPT_ADAPTER *ioc, int howlong, int sleepFlag); static int WaitForDoorbellInt(MPT_ADAPTER *ioc, int howlong, int sleepFlag); static int WaitForDoorbellReply(MPT_ADAPTER *ioc, int howlong, int sleepFlag); static int GetLanConfigPages(MPT_ADAPTER *ioc); -static int GetFcPortPage0(MPT_ADAPTER *ioc, int portnum); static int GetIoUnitPage2(MPT_ADAPTER *ioc); int mptbase_sas_persist_operation(MPT_ADAPTER *ioc, u8 persist_opcode); static int mpt_GetScsiPortSettings(MPT_ADAPTER *ioc, int portnum); @@ -175,7 +178,7 @@ static void mpt_get_fw_exp_ver(char *buf, MPT_ADAPTER *ioc); static int ProcessEventNotification(MPT_ADAPTER *ioc, EventNotificationReply_t *evReply, int *evHandlers); static void mpt_sp_ioc_info(MPT_ADAPTER *ioc, u32 ioc_status, MPT_FRAME_HDR *mf); static void mpt_fc_log_info(MPT_ADAPTER *ioc, u32 log_info); -static void mpt_sp_log_info(MPT_ADAPTER *ioc, u32 log_info); +static void mpt_spi_log_info(MPT_ADAPTER *ioc, u32 log_info); static void mpt_sas_log_info(MPT_ADAPTER *ioc, u32 log_info); /* module entry point */ @@ -313,13 +316,13 @@ mpt_reply(MPT_ADAPTER *ioc, u32 pa) u32 log_info = le32_to_cpu(mr->u.reply.IOCLogInfo); if (ioc->bus_type == FC) mpt_fc_log_info(ioc, log_info); - else if (ioc->bus_type == SCSI) - mpt_sp_log_info(ioc, log_info); + else if (ioc->bus_type == SPI) + mpt_spi_log_info(ioc, log_info); else if (ioc->bus_type == SAS) mpt_sas_log_info(ioc, log_info); } if (ioc_stat & MPI_IOCSTATUS_MASK) { - if (ioc->bus_type == SCSI && + if (ioc->bus_type == SPI && cb_idx != mpt_stm_index && cb_idx != mpt_lan_index) mpt_sp_ioc_info(ioc, (u32)ioc_stat, mf); @@ -1232,12 +1235,11 @@ mpt_attach(struct pci_dev *pdev, const struct pci_device_id *id) dprintk((KERN_INFO MYNAM ": Not using 64 bit consistent mask\n")); - ioc = kmalloc(sizeof(MPT_ADAPTER), GFP_ATOMIC); + ioc = kzalloc(sizeof(MPT_ADAPTER), GFP_ATOMIC); if (ioc == NULL) { printk(KERN_ERR MYNAM ": ERROR - Insufficient memory to add adapter!\n"); return -ENOMEM; } - memset(ioc, 0, sizeof(MPT_ADAPTER)); ioc->alloc_total = sizeof(MPT_ADAPTER); ioc->req_sz = MPT_DEFAULT_FRAME_SIZE; /* avoid div by zero! */ ioc->reply_sz = MPT_REPLY_FRAME_SIZE; @@ -1245,6 +1247,8 @@ mpt_attach(struct pci_dev *pdev, const struct pci_device_id *id) ioc->pcidev = pdev; ioc->diagPending = 0; spin_lock_init(&ioc->diagLock); + spin_lock_init(&ioc->fc_rescan_work_lock); + spin_lock_init(&ioc->fc_rport_lock); spin_lock_init(&ioc->initializing_hba_lock); /* Initialize the event logging. @@ -1268,6 +1272,10 @@ mpt_attach(struct pci_dev *pdev, const struct pci_device_id *id) */ INIT_LIST_HEAD(&ioc->configQ); + /* Initialize the fc rport list head. + */ + INIT_LIST_HEAD(&ioc->fc_rports); + /* Find lookup slot. */ INIT_LIST_HEAD(&ioc->list); ioc->id = mpt_ids++; @@ -1374,9 +1382,13 @@ mpt_attach(struct pci_dev *pdev, const struct pci_device_id *id) ioc->bus_type = FC; ioc->errata_flag_1064 = 1; } + else if (pdev->device == MPI_MANUFACTPAGE_DEVICEID_FC949E) { + ioc->prod_name = "LSIFC949E"; + ioc->bus_type = FC; + } else if (pdev->device == MPI_MANUFACTPAGE_DEVID_53C1030) { ioc->prod_name = "LSI53C1030"; - ioc->bus_type = SCSI; + ioc->bus_type = SPI; /* 1030 Chip Fix. Disable Split transactions * for PCIX. Set MOST bits to zero if Rev < C0( = 8). */ @@ -1389,7 +1401,7 @@ mpt_attach(struct pci_dev *pdev, const struct pci_device_id *id) } else if (pdev->device == MPI_MANUFACTPAGE_DEVID_1030_53C1035) { ioc->prod_name = "LSI53C1035"; - ioc->bus_type = SCSI; + ioc->bus_type = SPI; } else if (pdev->device == MPI_MANUFACTPAGE_DEVID_SAS1064) { ioc->prod_name = "LSISAS1064"; @@ -1436,6 +1448,9 @@ mpt_attach(struct pci_dev *pdev, const struct pci_device_id *id) ioc->pci_irq = -1; if (pdev->irq) { + if (mpt_msi_enable && !pci_enable_msi(pdev)) + printk(MYIOC_s_INFO_FMT "PCI-MSI enabled\n", ioc->name); + r = request_irq(pdev->irq, mpt_interrupt, SA_SHIRQ, ioc->name, ioc); if (r < 0) { @@ -1475,6 +1490,10 @@ mpt_attach(struct pci_dev *pdev, const struct pci_device_id *id) list_del(&ioc->list); free_irq(ioc->pci_irq, ioc); + if (mpt_msi_enable) + pci_disable_msi(pdev); + if (ioc->alt_ioc) + ioc->alt_ioc->alt_ioc = NULL; iounmap(mem); kfree(ioc); pci_set_drvdata(pdev, NULL); @@ -1622,7 +1641,7 @@ mpt_resume(struct pci_dev *pdev) pci_enable_device(pdev); /* enable interrupts */ - CHIPREG_WRITE32(&ioc->chip->IntMask, ~(MPI_HIM_RIM)); + CHIPREG_WRITE32(&ioc->chip->IntMask, MPI_HIM_DIM); ioc->active = 1; /* F/W not running */ @@ -1715,7 +1734,7 @@ mpt_do_ioc_recovery(MPT_ADAPTER *ioc, u32 reason, int sleepFlag) /* (re)Enable alt-IOC! (reply interrupt, FreeQ) */ dprintk((KERN_INFO MYNAM ": alt-%s reply irq re-enabled\n", ioc->alt_ioc->name)); - CHIPREG_WRITE32(&ioc->alt_ioc->chip->IntMask, ~(MPI_HIM_RIM)); + CHIPREG_WRITE32(&ioc->alt_ioc->chip->IntMask, MPI_HIM_DIM); ioc->alt_ioc->active = 1; } @@ -1831,7 +1850,7 @@ mpt_do_ioc_recovery(MPT_ADAPTER *ioc, u32 reason, int sleepFlag) if (ret == 0) { /* Enable! (reply interrupt) */ - CHIPREG_WRITE32(&ioc->chip->IntMask, ~(MPI_HIM_RIM)); + CHIPREG_WRITE32(&ioc->chip->IntMask, MPI_HIM_DIM); ioc->active = 1; } @@ -1839,7 +1858,7 @@ mpt_do_ioc_recovery(MPT_ADAPTER *ioc, u32 reason, int sleepFlag) /* (re)Enable alt-IOC! (reply interrupt) */ dinitprintk((KERN_INFO MYNAM ": alt-%s reply irq re-enabled\n", ioc->alt_ioc->name)); - CHIPREG_WRITE32(&ioc->alt_ioc->chip->IntMask, ~(MPI_HIM_RIM)); + CHIPREG_WRITE32(&ioc->alt_ioc->chip->IntMask, MPI_HIM_DIM); ioc->alt_ioc->active = 1; } @@ -1880,7 +1899,7 @@ mpt_do_ioc_recovery(MPT_ADAPTER *ioc, u32 reason, int sleepFlag) * (FCPortPage0_t stuff) */ for (ii=0; ii < ioc->facts.NumberOfPorts; ii++) { - (void) GetFcPortPage0(ioc, ii); + (void) mptbase_GetFcPortPage0(ioc, ii); } if ((ioc->pfacts[0].ProtocolFlags & MPI_PORTFACTS_PROTOCOL_LAN) && @@ -2128,6 +2147,8 @@ mpt_adapter_dispose(MPT_ADAPTER *ioc) if (ioc->pci_irq != -1) { free_irq(ioc->pci_irq, ioc); + if (mpt_msi_enable) + pci_disable_msi(ioc->pcidev); ioc->pci_irq = -1; } @@ -2149,6 +2170,10 @@ mpt_adapter_dispose(MPT_ADAPTER *ioc) sz_last = ioc->alloc_total; dprintk((KERN_INFO MYNAM ": %s: free'd %d of %d bytes\n", ioc->name, sz_first-sz_last+(int)sizeof(*ioc), sz_first)); + + if (ioc->alt_ioc) + ioc->alt_ioc->alt_ioc = NULL; + kfree(ioc); } @@ -2762,13 +2787,16 @@ SendPortEnable(MPT_ADAPTER *ioc, int portnum, int sleepFlag) /* RAID FW may take a long time to enable */ - if ( (ioc->facts.ProductID & MPI_FW_HEADER_PID_PROD_MASK) - > MPI_FW_HEADER_PID_PROD_TARGET_SCSI ) { - rc = mpt_handshake_req_reply_wait(ioc, req_sz, (u32*)&port_enable, - reply_sz, (u16*)&reply_buf, 300 /*seconds*/, sleepFlag); + if (((ioc->facts.ProductID & MPI_FW_HEADER_PID_PROD_MASK) + > MPI_FW_HEADER_PID_PROD_TARGET_SCSI) || + (ioc->bus_type == SAS)) { + rc = mpt_handshake_req_reply_wait(ioc, req_sz, + (u32*)&port_enable, reply_sz, (u16*)&reply_buf, + 300 /*seconds*/, sleepFlag); } else { - rc = mpt_handshake_req_reply_wait(ioc, req_sz, (u32*)&port_enable, - reply_sz, (u16*)&reply_buf, 30 /*seconds*/, sleepFlag); + rc = mpt_handshake_req_reply_wait(ioc, req_sz, + (u32*)&port_enable, reply_sz, (u16*)&reply_buf, + 30 /*seconds*/, sleepFlag); } return rc; } @@ -3042,7 +3070,7 @@ mpt_downloadboot(MPT_ADAPTER *ioc, MpiFwHeader_t *pFwHeader, int sleepFlag) /* Clear the internal flash bad bit - autoincrementing register, * so must do two writes. */ - if (ioc->bus_type == SCSI) { + if (ioc->bus_type == SPI) { /* * 1030 and 1035 H/W errata, workaround to access * the ClearFlashBadSignatureBit @@ -3152,7 +3180,7 @@ KickStart(MPT_ADAPTER *ioc, int force, int sleepFlag) int cnt,cntdn; dinitprintk((KERN_WARNING MYNAM ": KickStarting %s!\n", ioc->name)); - if (ioc->bus_type == SCSI) { + if (ioc->bus_type == SPI) { /* Always issue a Msg Unit Reset first. This will clear some * SCSI bus hang conditions. */ @@ -3580,7 +3608,7 @@ initChainBuffers(MPT_ADAPTER *ioc) dinitprintk((KERN_INFO MYNAM ": %s Now numSGE=%d num_sge=%d num_chain=%d\n", ioc->name, numSGE, num_sge, num_chain)); - if (ioc->bus_type == SCSI) + if (ioc->bus_type == SPI) num_chain *= MPT_SCSI_CAN_QUEUE; else num_chain *= MPT_FC_CAN_QUEUE; @@ -4199,7 +4227,7 @@ GetLanConfigPages(MPT_ADAPTER *ioc) /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ /* - * GetFcPortPage0 - Fetch FCPort config Page0. + * mptbase_GetFcPortPage0 - Fetch FCPort config Page0. * @ioc: Pointer to MPT_ADAPTER structure * @portnum: IOC Port number * @@ -4209,8 +4237,8 @@ GetLanConfigPages(MPT_ADAPTER *ioc) * -EAGAIN if no msg frames currently available * -EFAULT for non-successful reply or no reply (timeout) */ -static int -GetFcPortPage0(MPT_ADAPTER *ioc, int portnum) +int +mptbase_GetFcPortPage0(MPT_ADAPTER *ioc, int portnum) { ConfigPageHeader_t hdr; CONFIGPARMS cfg; @@ -4220,6 +4248,8 @@ GetFcPortPage0(MPT_ADAPTER *ioc, int portnum) int data_sz; int copy_sz; int rc; + int count = 400; + /* Get FCPort Page 0 header */ hdr.PageVersion = 0; @@ -4243,6 +4273,8 @@ GetFcPortPage0(MPT_ADAPTER *ioc, int portnum) rc = -ENOMEM; ppage0_alloc = (FCPortPage0_t *) pci_alloc_consistent(ioc->pcidev, data_sz, &page0_dma); if (ppage0_alloc) { + + try_again: memset((u8 *)ppage0_alloc, 0, data_sz); cfg.physAddr = page0_dma; cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT; @@ -4274,6 +4306,19 @@ GetFcPortPage0(MPT_ADAPTER *ioc, int portnum) pp0dest->DiscoveredPortsCount = le32_to_cpu(pp0dest->DiscoveredPortsCount); pp0dest->MaxInitiators = le32_to_cpu(pp0dest->MaxInitiators); + /* + * if still doing discovery, + * hang loose a while until finished + */ + if (pp0dest->PortState == MPI_FCPORTPAGE0_PORTSTATE_UNKNOWN) { + if (count-- > 0) { + msleep_interruptible(100); + goto try_again; + } + printk(MYIOC_s_INFO_FMT "Firmware discovery not" + " complete.\n", + ioc->name); + } } pci_free_consistent(ioc->pcidev, data_sz, (u8 *) ppage0_alloc, page0_dma); @@ -4362,6 +4407,138 @@ mptbase_sas_persist_operation(MPT_ADAPTER *ioc, u8 persist_opcode) } /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ + +static void +mptbase_raid_process_event_data(MPT_ADAPTER *ioc, + MpiEventDataRaid_t * pRaidEventData) +{ + int volume; + int reason; + int disk; + int status; + int flags; + int state; + + volume = pRaidEventData->VolumeID; + reason = pRaidEventData->ReasonCode; + disk = pRaidEventData->PhysDiskNum; + status = le32_to_cpu(pRaidEventData->SettingsStatus); + flags = (status >> 0) & 0xff; + state = (status >> 8) & 0xff; + + if (reason == MPI_EVENT_RAID_RC_DOMAIN_VAL_NEEDED) { + return; + } + + if ((reason >= MPI_EVENT_RAID_RC_PHYSDISK_CREATED && + reason <= MPI_EVENT_RAID_RC_PHYSDISK_STATUS_CHANGED) || + (reason == MPI_EVENT_RAID_RC_SMART_DATA)) { + printk(MYIOC_s_INFO_FMT "RAID STATUS CHANGE for PhysDisk %d\n", + ioc->name, disk); + } else { + printk(MYIOC_s_INFO_FMT "RAID STATUS CHANGE for VolumeID %d\n", + ioc->name, volume); + } + + switch(reason) { + case MPI_EVENT_RAID_RC_VOLUME_CREATED: + printk(MYIOC_s_INFO_FMT " volume has been created\n", + ioc->name); + break; + + case MPI_EVENT_RAID_RC_VOLUME_DELETED: + + printk(MYIOC_s_INFO_FMT " volume has been deleted\n", + ioc->name); + break; + + case MPI_EVENT_RAID_RC_VOLUME_SETTINGS_CHANGED: + printk(MYIOC_s_INFO_FMT " volume settings have been changed\n", + ioc->name); + break; + + case MPI_EVENT_RAID_RC_VOLUME_STATUS_CHANGED: + printk(MYIOC_s_INFO_FMT " volume is now %s%s%s%s\n", + ioc->name, + state == MPI_RAIDVOL0_STATUS_STATE_OPTIMAL + ? "optimal" + : state == MPI_RAIDVOL0_STATUS_STATE_DEGRADED + ? "degraded" + : state == MPI_RAIDVOL0_STATUS_STATE_FAILED + ? "failed" + : "state unknown", + flags & MPI_RAIDVOL0_STATUS_FLAG_ENABLED + ? ", enabled" : "", + flags & MPI_RAIDVOL0_STATUS_FLAG_QUIESCED + ? ", quiesced" : "", + flags & MPI_RAIDVOL0_STATUS_FLAG_RESYNC_IN_PROGRESS + ? ", resync in progress" : "" ); + break; + + case MPI_EVENT_RAID_RC_VOLUME_PHYSDISK_CHANGED: + printk(MYIOC_s_INFO_FMT " volume membership of PhysDisk %d has changed\n", + ioc->name, disk); + break; + + case MPI_EVENT_RAID_RC_PHYSDISK_CREATED: + printk(MYIOC_s_INFO_FMT " PhysDisk has been created\n", + ioc->name); + break; + + case MPI_EVENT_RAID_RC_PHYSDISK_DELETED: + printk(MYIOC_s_INFO_FMT " PhysDisk has been deleted\n", + ioc->name); + break; + + case MPI_EVENT_RAID_RC_PHYSDISK_SETTINGS_CHANGED: + printk(MYIOC_s_INFO_FMT " PhysDisk settings have been changed\n", + ioc->name); + break; + + case MPI_EVENT_RAID_RC_PHYSDISK_STATUS_CHANGED: + printk(MYIOC_s_INFO_FMT " PhysDisk is now %s%s%s\n", + ioc->name, + state == MPI_PHYSDISK0_STATUS_ONLINE + ? "online" + : state == MPI_PHYSDISK0_STATUS_MISSING + ? "missing" + : state == MPI_PHYSDISK0_STATUS_NOT_COMPATIBLE + ? "not compatible" + : state == MPI_PHYSDISK0_STATUS_FAILED + ? "failed" + : state == MPI_PHYSDISK0_STATUS_INITIALIZING + ? "initializing" + : state == MPI_PHYSDISK0_STATUS_OFFLINE_REQUESTED + ? "offline requested" + : state == MPI_PHYSDISK0_STATUS_FAILED_REQUESTED + ? "failed requested" + : state == MPI_PHYSDISK0_STATUS_OTHER_OFFLINE + ? "offline" + : "state unknown", + flags & MPI_PHYSDISK0_STATUS_FLAG_OUT_OF_SYNC + ? ", out of sync" : "", + flags & MPI_PHYSDISK0_STATUS_FLAG_QUIESCED + ? ", quiesced" : "" ); + break; + + case MPI_EVENT_RAID_RC_DOMAIN_VAL_NEEDED: + printk(MYIOC_s_INFO_FMT " Domain Validation needed for PhysDisk %d\n", + ioc->name, disk); + break; + + case MPI_EVENT_RAID_RC_SMART_DATA: + printk(MYIOC_s_INFO_FMT " SMART data received, ASC/ASCQ = %02xh/%02xh\n", + ioc->name, pRaidEventData->ASC, pRaidEventData->ASCQ); + break; + + case MPI_EVENT_RAID_RC_REPLACE_ACTION_STARTED: + printk(MYIOC_s_INFO_FMT " replacement of PhysDisk %d has started\n", + ioc->name, disk); + break; + } +} + +/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ /* * GetIoUnitPage2 - Retrieve BIOS version and boot order information. * @ioc: Pointer to MPT_ADAPTER structure @@ -4573,6 +4750,14 @@ mpt_GetScsiPortSettings(MPT_ADAPTER *ioc, int portnum) SCSIPortPage2_t *pPP2 = (SCSIPortPage2_t *) pbuf; MpiDeviceInfo_t *pdevice = NULL; + /* + * Save "Set to Avoid SCSI Bus Resets" flag + */ + ioc->spi_data.bus_reset = + (le32_to_cpu(pPP2->PortFlags) & + MPI_SCSIPORTPAGE2_PORT_FLAGS_AVOID_SCSI_RESET) ? + 0 : 1 ; + /* Save the Port Page 2 data * (reformat into a 32bit quantity) */ @@ -5942,6 +6127,10 @@ ProcessEventNotification(MPT_ADAPTER *ioc, EventNotificationReply_t *pEventReply } } break; + case MPI_EVENT_INTEGRATED_RAID: + mptbase_raid_process_event_data(ioc, + (MpiEventDataRaid_t *)pEventReply->Data); + break; default: break; } @@ -6021,7 +6210,7 @@ mpt_fc_log_info(MPT_ADAPTER *ioc, u32 log_info) /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ /* - * mpt_sp_log_info - Log information returned from SCSI Parallel IOC. + * mpt_spi_log_info - Log information returned from SCSI Parallel IOC. * @ioc: Pointer to MPT_ADAPTER structure * @mr: Pointer to MPT reply frame * @log_info: U32 LogInfo word from the IOC @@ -6029,7 +6218,7 @@ mpt_fc_log_info(MPT_ADAPTER *ioc, u32 log_info) * Refer to lsi/sp_log.h. */ static void -mpt_sp_log_info(MPT_ADAPTER *ioc, u32 log_info) +mpt_spi_log_info(MPT_ADAPTER *ioc, u32 log_info) { u32 info = log_info & 0x00FF0000; char *desc = "unknown"; @@ -6358,6 +6547,7 @@ EXPORT_SYMBOL(mpt_alloc_fw_memory); EXPORT_SYMBOL(mpt_free_fw_memory); EXPORT_SYMBOL(mptbase_sas_persist_operation); EXPORT_SYMBOL(mpt_alt_ioc_wait); +EXPORT_SYMBOL(mptbase_GetFcPortPage0); /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ diff --git a/drivers/message/fusion/mptbase.h b/drivers/message/fusion/mptbase.h index bac8eb4186d..ea2649ecad1 100644 --- a/drivers/message/fusion/mptbase.h +++ b/drivers/message/fusion/mptbase.h @@ -76,8 +76,8 @@ #define COPYRIGHT "Copyright (c) 1999-2005 " MODULEAUTHOR #endif -#define MPT_LINUX_VERSION_COMMON "3.03.04" -#define MPT_LINUX_PACKAGE_NAME "@(#)mptlinux-3.03.04" +#define MPT_LINUX_VERSION_COMMON "3.03.07" +#define MPT_LINUX_PACKAGE_NAME "@(#)mptlinux-3.03.07" #define WHAT_MAGIC_STRING "@" "(" "#" ")" #define show_mptmod_ver(s,ver) \ @@ -123,7 +123,7 @@ #define MPT_MAX_FRAME_SIZE 128 #define MPT_DEFAULT_FRAME_SIZE 128 -#define MPT_REPLY_FRAME_SIZE 0x40 /* Must be a multiple of 8 */ +#define MPT_REPLY_FRAME_SIZE 0x50 /* Must be a multiple of 8 */ #define MPT_SG_REQ_128_SCALE 1 #define MPT_SG_REQ_96_SCALE 2 @@ -321,7 +321,7 @@ typedef struct _SYSIF_REGS * Dynamic Multi-Pathing specific stuff... */ -/* VirtDevice negoFlags field */ +/* VirtTarget negoFlags field */ #define MPT_TARGET_NO_NEGO_WIDE 0x01 #define MPT_TARGET_NO_NEGO_SYNC 0x02 #define MPT_TARGET_NO_NEGO_QAS 0x04 @@ -330,8 +330,7 @@ typedef struct _SYSIF_REGS /* * VirtDevice - FC LUN device or SCSI target device */ -typedef struct _VirtDevice { - struct scsi_device *device; +typedef struct _VirtTarget { u8 tflags; u8 ioc_id; u8 target_id; @@ -342,21 +341,18 @@ typedef struct _VirtDevice { u8 negoFlags; /* bit field, see above */ u8 raidVolume; /* set, if RAID Volume */ u8 type; /* byte 0 of Inquiry data */ - u8 cflags; /* controller flags */ - u8 rsvd1raid; - u16 fc_phys_lun; - u16 fc_xlat_lun; u32 num_luns; u32 luns[8]; /* Max LUNs is 256 */ - u8 pad[4]; u8 inq_data[8]; - /* IEEE Registered Extended Identifier - obtained via INQUIRY VPD page 0x83 */ - /* NOTE: Do not separate uniq_prepad and uniq_data - as they are treateed as a single entity in the code */ - u8 uniq_prepad[8]; - u8 uniq_data[20]; - u8 pad2[4]; +} VirtTarget; + +typedef struct _VirtDevice { + VirtTarget *vtarget; + u8 ioc_id; + u8 bus_id; + u8 target_id; + u8 configured_lun; + u32 lun; } VirtDevice; /* @@ -417,7 +413,7 @@ typedef struct _MPT_IOCTL { u8 status; /* current command status */ u8 reset; /* 1 if bus reset allowed */ u8 target; /* target for reset */ - struct semaphore sem_ioc; + struct mutex ioctl_mutex; } MPT_IOCTL; #define MPT_SAS_MGMT_STATUS_RF_VALID 0x02 /* The Reply Frame is VALID */ @@ -425,7 +421,7 @@ typedef struct _MPT_IOCTL { #define MPT_SAS_MGMT_STATUS_TM_FAILED 0x40 /* User TM request failed */ typedef struct _MPT_SAS_MGMT { - struct semaphore mutex; + struct mutex mutex; struct completion done; u8 reply[MPT_DEFAULT_FRAME_SIZE]; /* reply frame data */ u8 status; /* current command status */ @@ -503,6 +499,23 @@ typedef struct _RaidCfgData { int isRaid; /* bit field, 1 if RAID */ }RaidCfgData; +#define MPT_RPORT_INFO_FLAGS_REGISTERED 0x01 /* rport registered */ +#define MPT_RPORT_INFO_FLAGS_MISSING 0x02 /* missing from DevPage0 scan */ +#define MPT_RPORT_INFO_FLAGS_MAPPED_VDEV 0x04 /* target mapped in vdev */ + +/* + * data allocated for each fc rport device + */ +struct mptfc_rport_info +{ + struct list_head list; + struct fc_rport *rport; + struct scsi_target *starget; + FCDevicePage0_t pg0; + u8 flags; + u8 remap_needed; +}; + /* * Adapter Structure - pci_dev specific. Maximum: MPT_MAX_ADAPTERS */ @@ -616,7 +629,17 @@ typedef struct _MPT_ADAPTER struct list_head list; struct net_device *netdev; struct list_head sas_topology; + struct mutex sas_topology_mutex; MPT_SAS_MGMT sas_mgmt; + int num_ports; + struct work_struct mptscsih_persistTask; + + struct list_head fc_rports; + spinlock_t fc_rport_lock; /* list and ri flags */ + spinlock_t fc_rescan_work_lock; + int fc_rescan_work_count; + struct work_struct fc_rescan_work; + } MPT_ADAPTER; /* @@ -782,6 +805,12 @@ typedef struct _mpt_sge { #define dreplyprintk(x) #endif +#ifdef DMPT_DEBUG_FC +#define dfcprintk(x) printk x +#else +#define dfcprintk(x) +#endif + #ifdef MPT_DEBUG_TM #define dtmprintk(x) printk x #define DBG_DUMP_TM_REQUEST_FRAME(mfp) \ @@ -903,7 +932,7 @@ typedef struct _MPT_LOCAL_REPLY { typedef enum { FC, - SCSI, + SPI, SAS } BUS_TYPE; @@ -912,7 +941,7 @@ typedef struct _MPT_SCSI_HOST { int port; u32 pad0; struct scsi_cmnd **ScsiLookup; - VirtDevice **Targets; + VirtTarget **Targets; MPT_LOCAL_REPLY *pLocal; /* used for internal commands */ struct timer_list timer; /* Pool of memory for holding SCpnts before doing @@ -1003,6 +1032,7 @@ extern void mpt_free_fw_memory(MPT_ADAPTER *ioc); extern int mpt_findImVolumes(MPT_ADAPTER *ioc); extern int mpt_read_ioc_pg_3(MPT_ADAPTER *ioc); extern int mptbase_sas_persist_operation(MPT_ADAPTER *ioc, u8 persist_opcode); +extern int mptbase_GetFcPortPage0(MPT_ADAPTER *ioc, int portnum); extern int mpt_alt_ioc_wait(MPT_ADAPTER *ioc); /* diff --git a/drivers/message/fusion/mptctl.c b/drivers/message/fusion/mptctl.c index 602138f8544..bdf70998798 100644 --- a/drivers/message/fusion/mptctl.c +++ b/drivers/message/fusion/mptctl.c @@ -177,10 +177,10 @@ mptctl_syscall_down(MPT_ADAPTER *ioc, int nonblock) dctlprintk((KERN_INFO MYNAM "::mptctl_syscall_down(%p,%d) called\n", ioc, nonblock)); if (nonblock) { - if (down_trylock(&ioc->ioctl->sem_ioc)) + if (!mutex_trylock(&ioc->ioctl->ioctl_mutex)) rc = -EAGAIN; } else { - if (down_interruptible(&ioc->ioctl->sem_ioc)) + if (mutex_lock_interruptible(&ioc->ioctl->ioctl_mutex)) rc = -ERESTARTSYS; } dctlprintk((KERN_INFO MYNAM "::mptctl_syscall_down return %d\n", rc)); @@ -557,7 +557,7 @@ __mptctl_ioctl(struct file *file, unsigned int cmd, unsigned long arg) else ret = -EINVAL; - up(&iocp->ioctl->sem_ioc); + mutex_unlock(&iocp->ioctl->ioctl_mutex); return ret; } @@ -1245,7 +1245,7 @@ mptctl_gettargetinfo (unsigned long arg) MPT_ADAPTER *ioc; struct Scsi_Host *sh; MPT_SCSI_HOST *hd; - VirtDevice *vdev; + VirtTarget *vdev; char *pmem; int *pdata; IOCPage2_t *pIoc2; @@ -1822,7 +1822,7 @@ mptctl_do_mpt_command (struct mpt_ioctl_command karg, void __user *mfPtr) case MPI_FUNCTION_SCSI_IO_REQUEST: if (ioc->sh) { SCSIIORequest_t *pScsiReq = (SCSIIORequest_t *) mf; - VirtDevice *pTarget = NULL; + VirtTarget *pTarget = NULL; MPT_SCSI_HOST *hd = NULL; int qtag = MPI_SCSIIO_CONTROL_UNTAGGED; int scsidir = 0; @@ -2585,8 +2585,6 @@ static struct miscdevice mptctl_miscdev = { #ifdef CONFIG_COMPAT -#include <linux/ioctl32.h> - static int compat_mptfwxfer_ioctl(struct file *filp, unsigned int cmd, unsigned long arg) @@ -2621,7 +2619,7 @@ compat_mptfwxfer_ioctl(struct file *filp, unsigned int cmd, ret = mptctl_do_fw_download(kfw.iocnum, kfw.bufp, kfw.fwlen); - up(&iocp->ioctl->sem_ioc); + mutex_unlock(&iocp->ioctl->ioctl_mutex); return ret; } @@ -2675,7 +2673,7 @@ compat_mpt_command(struct file *filp, unsigned int cmd, */ ret = mptctl_do_mpt_command (karg, &uarg->MF); - up(&iocp->ioctl->sem_ioc); + mutex_unlock(&iocp->ioctl->ioctl_mutex); return ret; } @@ -2745,7 +2743,7 @@ mptctl_probe(struct pci_dev *pdev, const struct pci_device_id *id) memset(mem, 0, sz); ioc->ioctl = (MPT_IOCTL *) mem; ioc->ioctl->ioc = ioc; - sema_init(&ioc->ioctl->sem_ioc, 1); + mutex_init(&ioc->ioctl->ioctl_mutex); return 0; out_fail: diff --git a/drivers/message/fusion/mptfc.c b/drivers/message/fusion/mptfc.c index a628be9bbba..c3a3499bce2 100644 --- a/drivers/message/fusion/mptfc.c +++ b/drivers/message/fusion/mptfc.c @@ -55,12 +55,14 @@ #include <linux/reboot.h> /* notifier code */ #include <linux/sched.h> #include <linux/workqueue.h> +#include <linux/sort.h> #include <scsi/scsi.h> #include <scsi/scsi_cmnd.h> #include <scsi/scsi_device.h> #include <scsi/scsi_host.h> #include <scsi/scsi_tcq.h> +#include <scsi/scsi_transport_fc.h> #include "mptbase.h" #include "mptscsih.h" @@ -79,18 +81,37 @@ static int mpt_pq_filter = 0; module_param(mpt_pq_filter, int, 0); MODULE_PARM_DESC(mpt_pq_filter, " Enable peripheral qualifier filter: enable=1 (default=0)"); +#define MPTFC_DEV_LOSS_TMO (60) +static int mptfc_dev_loss_tmo = MPTFC_DEV_LOSS_TMO; /* reasonable default */ +module_param(mptfc_dev_loss_tmo, int, 0); +MODULE_PARM_DESC(mptfc_dev_loss_tmo, " Initial time the driver programs the " + " transport to wait for an rport to " + " return following a device loss event." + " Default=60."); + static int mptfcDoneCtx = -1; static int mptfcTaskCtx = -1; static int mptfcInternalCtx = -1; /* Used only for internal commands */ +static int mptfc_target_alloc(struct scsi_target *starget); +static int mptfc_slave_alloc(struct scsi_device *sdev); +static int mptfc_qcmd(struct scsi_cmnd *SCpnt, + void (*done)(struct scsi_cmnd *)); +static void mptfc_target_destroy(struct scsi_target *starget); +static void mptfc_set_rport_loss_tmo(struct fc_rport *rport, uint32_t timeout); +static void __devexit mptfc_remove(struct pci_dev *pdev); + static struct scsi_host_template mptfc_driver_template = { + .module = THIS_MODULE, .proc_name = "mptfc", .proc_info = mptscsih_proc_info, .name = "MPT FC Host", .info = mptscsih_info, - .queuecommand = mptscsih_qcmd, - .slave_alloc = mptscsih_slave_alloc, + .queuecommand = mptfc_qcmd, + .target_alloc = mptfc_target_alloc, + .slave_alloc = mptfc_slave_alloc, .slave_configure = mptscsih_slave_configure, + .target_destroy = mptfc_target_destroy, .slave_destroy = mptscsih_slave_destroy, .change_queue_depth = mptscsih_change_queue_depth, .eh_abort_handler = mptscsih_abort, @@ -125,37 +146,573 @@ static struct pci_device_id mptfc_pci_table[] = { PCI_ANY_ID, PCI_ANY_ID }, { PCI_VENDOR_ID_LSI_LOGIC, PCI_DEVICE_ID_LSI_FC949X, PCI_ANY_ID, PCI_ANY_ID }, + { PCI_VENDOR_ID_LSI_LOGIC, PCI_DEVICE_ID_LSI_FC949ES, + PCI_ANY_ID, PCI_ANY_ID }, {0} /* Terminating entry */ }; MODULE_DEVICE_TABLE(pci, mptfc_pci_table); -/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ -/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ +static struct scsi_transport_template *mptfc_transport_template = NULL; + +struct fc_function_template mptfc_transport_functions = { + .dd_fcrport_size = 8, + .show_host_node_name = 1, + .show_host_port_name = 1, + .show_host_supported_classes = 1, + .show_host_port_id = 1, + .show_rport_supported_classes = 1, + .show_starget_node_name = 1, + .show_starget_port_name = 1, + .show_starget_port_id = 1, + .set_rport_dev_loss_tmo = mptfc_set_rport_loss_tmo, + .show_rport_dev_loss_tmo = 1, + +}; + +/* FIXME! values controlling firmware RESCAN event + * need to be set low to allow dev_loss_tmo to + * work as expected. Currently, firmware doesn't + * notify driver of RESCAN event until some number + * of seconds elapse. This value can be set via + * lsiutil. + */ +static void +mptfc_set_rport_loss_tmo(struct fc_rport *rport, uint32_t timeout) +{ + if (timeout > 0) + rport->dev_loss_tmo = timeout; + else + rport->dev_loss_tmo = mptfc_dev_loss_tmo; +} + +static int +mptfc_FcDevPage0_cmp_func(const void *a, const void *b) +{ + FCDevicePage0_t **aa = (FCDevicePage0_t **)a; + FCDevicePage0_t **bb = (FCDevicePage0_t **)b; + + if ((*aa)->CurrentBus == (*bb)->CurrentBus) { + if ((*aa)->CurrentTargetID == (*bb)->CurrentTargetID) + return 0; + if ((*aa)->CurrentTargetID < (*bb)->CurrentTargetID) + return -1; + return 1; + } + if ((*aa)->CurrentBus < (*bb)->CurrentBus) + return -1; + return 1; +} + +static int +mptfc_GetFcDevPage0(MPT_ADAPTER *ioc, int ioc_port, + void(*func)(MPT_ADAPTER *ioc,int channel, FCDevicePage0_t *arg)) +{ + ConfigPageHeader_t hdr; + CONFIGPARMS cfg; + FCDevicePage0_t *ppage0_alloc, *fc; + dma_addr_t page0_dma; + int data_sz; + int ii; + + FCDevicePage0_t *p0_array=NULL, *p_p0; + FCDevicePage0_t **pp0_array=NULL, **p_pp0; + + int rc = -ENOMEM; + U32 port_id = 0xffffff; + int num_targ = 0; + int max_bus = ioc->facts.MaxBuses; + int max_targ = ioc->facts.MaxDevices; + + if (max_bus == 0 || max_targ == 0) + goto out; + + data_sz = sizeof(FCDevicePage0_t) * max_bus * max_targ; + p_p0 = p0_array = kzalloc(data_sz, GFP_KERNEL); + if (!p0_array) + goto out; + + data_sz = sizeof(FCDevicePage0_t *) * max_bus * max_targ; + p_pp0 = pp0_array = kzalloc(data_sz, GFP_KERNEL); + if (!pp0_array) + goto out; + + do { + /* Get FC Device Page 0 header */ + hdr.PageVersion = 0; + hdr.PageLength = 0; + hdr.PageNumber = 0; + hdr.PageType = MPI_CONFIG_PAGETYPE_FC_DEVICE; + cfg.cfghdr.hdr = &hdr; + cfg.physAddr = -1; + cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER; + cfg.dir = 0; + cfg.pageAddr = port_id; + cfg.timeout = 0; + + if ((rc = mpt_config(ioc, &cfg)) != 0) + break; + + if (hdr.PageLength <= 0) + break; + + data_sz = hdr.PageLength * 4; + ppage0_alloc = pci_alloc_consistent(ioc->pcidev, data_sz, + &page0_dma); + rc = -ENOMEM; + if (!ppage0_alloc) + break; + + cfg.physAddr = page0_dma; + cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT; + + if ((rc = mpt_config(ioc, &cfg)) == 0) { + ppage0_alloc->PortIdentifier = + le32_to_cpu(ppage0_alloc->PortIdentifier); + + ppage0_alloc->WWNN.Low = + le32_to_cpu(ppage0_alloc->WWNN.Low); + + ppage0_alloc->WWNN.High = + le32_to_cpu(ppage0_alloc->WWNN.High); + + ppage0_alloc->WWPN.Low = + le32_to_cpu(ppage0_alloc->WWPN.Low); + + ppage0_alloc->WWPN.High = + le32_to_cpu(ppage0_alloc->WWPN.High); + + ppage0_alloc->BBCredit = + le16_to_cpu(ppage0_alloc->BBCredit); + + ppage0_alloc->MaxRxFrameSize = + le16_to_cpu(ppage0_alloc->MaxRxFrameSize); + + port_id = ppage0_alloc->PortIdentifier; + num_targ++; + *p_p0 = *ppage0_alloc; /* save data */ + *p_pp0++ = p_p0++; /* save addr */ + } + pci_free_consistent(ioc->pcidev, data_sz, + (u8 *) ppage0_alloc, page0_dma); + if (rc != 0) + break; + + } while (port_id <= 0xff0000); + + if (num_targ) { + /* sort array */ + if (num_targ > 1) + sort (pp0_array, num_targ, sizeof(FCDevicePage0_t *), + mptfc_FcDevPage0_cmp_func, NULL); + /* call caller's func for each targ */ + for (ii = 0; ii < num_targ; ii++) { + fc = *(pp0_array+ii); + func(ioc, ioc_port, fc); + } + } + + out: + if (pp0_array) + kfree(pp0_array); + if (p0_array) + kfree(p0_array); + return rc; +} + +static int +mptfc_generate_rport_ids(FCDevicePage0_t *pg0, struct fc_rport_identifiers *rid) +{ + /* not currently usable */ + if (pg0->Flags & (MPI_FC_DEVICE_PAGE0_FLAGS_PLOGI_INVALID | + MPI_FC_DEVICE_PAGE0_FLAGS_PRLI_INVALID)) + return -1; + + if (!(pg0->Flags & MPI_FC_DEVICE_PAGE0_FLAGS_TARGETID_BUS_VALID)) + return -1; + + if (!(pg0->Protocol & MPI_FC_DEVICE_PAGE0_PROT_FCP_TARGET)) + return -1; + + /* + * board data structure already normalized to platform endianness + * shifted to avoid unaligned access on 64 bit architecture + */ + rid->node_name = ((u64)pg0->WWNN.High) << 32 | (u64)pg0->WWNN.Low; + rid->port_name = ((u64)pg0->WWPN.High) << 32 | (u64)pg0->WWPN.Low; + rid->port_id = pg0->PortIdentifier; + rid->roles = FC_RPORT_ROLE_UNKNOWN; + rid->roles |= FC_RPORT_ROLE_FCP_TARGET; + if (pg0->Protocol & MPI_FC_DEVICE_PAGE0_PROT_FCP_INITIATOR) + rid->roles |= FC_RPORT_ROLE_FCP_INITIATOR; + + return 0; +} + +static void +mptfc_remap_sdev(struct scsi_device *sdev, void *arg) +{ + VirtDevice *vdev; + VirtTarget *vtarget; + struct scsi_target *starget; + + starget = scsi_target(sdev); + if (starget->hostdata == arg) { + vtarget = arg; + vdev = sdev->hostdata; + if (vdev) { + vdev->bus_id = vtarget->bus_id; + vdev->target_id = vtarget->target_id; + } + } +} + +static void +mptfc_register_dev(MPT_ADAPTER *ioc, int channel, FCDevicePage0_t *pg0) +{ + struct fc_rport_identifiers rport_ids; + struct fc_rport *rport; + struct mptfc_rport_info *ri; + int new_ri = 1; + u64 pn; + unsigned long flags; + VirtTarget *vtarget; + + if (mptfc_generate_rport_ids(pg0, &rport_ids) < 0) + return; + + /* scan list looking for a match */ + spin_lock_irqsave(&ioc->fc_rport_lock, flags); + list_for_each_entry(ri, &ioc->fc_rports, list) { + pn = (u64)ri->pg0.WWPN.High << 32 | (u64)ri->pg0.WWPN.Low; + if (pn == rport_ids.port_name) { /* match */ + list_move_tail(&ri->list, &ioc->fc_rports); + new_ri = 0; + break; + } + } + if (new_ri) { /* allocate one */ + spin_unlock_irqrestore(&ioc->fc_rport_lock, flags); + ri = kzalloc(sizeof(struct mptfc_rport_info), GFP_KERNEL); + if (!ri) + return; + spin_lock_irqsave(&ioc->fc_rport_lock, flags); + list_add_tail(&ri->list, &ioc->fc_rports); + } + + ri->pg0 = *pg0; /* add/update pg0 data */ + ri->flags &= ~MPT_RPORT_INFO_FLAGS_MISSING; + + /* MPT_RPORT_INFO_FLAGS_REGISTERED - rport not previously deleted */ + if (!(ri->flags & MPT_RPORT_INFO_FLAGS_REGISTERED)) { + ri->flags |= MPT_RPORT_INFO_FLAGS_REGISTERED; + spin_unlock_irqrestore(&ioc->fc_rport_lock, flags); + rport = fc_remote_port_add(ioc->sh, channel, &rport_ids); + spin_lock_irqsave(&ioc->fc_rport_lock, flags); + if (rport) { + ri->rport = rport; + if (new_ri) /* may have been reset by user */ + rport->dev_loss_tmo = mptfc_dev_loss_tmo; + *((struct mptfc_rport_info **)rport->dd_data) = ri; + /* + * if already mapped, remap here. If not mapped, + * target_alloc will allocate vtarget and map, + * slave_alloc will fill in vdev from vtarget. + */ + if (ri->starget) { + vtarget = ri->starget->hostdata; + if (vtarget) { + vtarget->target_id = pg0->CurrentTargetID; + vtarget->bus_id = pg0->CurrentBus; + starget_for_each_device(ri->starget, + vtarget,mptfc_remap_sdev); + } + ri->remap_needed = 0; + } + dfcprintk ((MYIOC_s_INFO_FMT + "mptfc_reg_dev.%d: %x, %llx / %llx, tid %d, " + "rport tid %d, tmo %d\n", + ioc->name, + oc->sh->host_no, + pg0->PortIdentifier, + pg0->WWNN, + pg0->WWPN, + pg0->CurrentTargetID, + ri->rport->scsi_target_id, + ri->rport->dev_loss_tmo)); + } else { + list_del(&ri->list); + kfree(ri); + ri = NULL; + } + } + spin_unlock_irqrestore(&ioc->fc_rport_lock,flags); + +} + /* - * mptfc_probe - Installs scsi devices per bus. - * @pdev: Pointer to pci_dev structure - * - * Returns 0 for success, non-zero for failure. - * + * OS entry point to allow for host driver to free allocated memory + * Called if no device present or device being unloaded + */ +static void +mptfc_target_destroy(struct scsi_target *starget) +{ + struct fc_rport *rport; + struct mptfc_rport_info *ri; + + rport = starget_to_rport(starget); + if (rport) { + ri = *((struct mptfc_rport_info **)rport->dd_data); + if (ri) /* better be! */ + ri->starget = NULL; + } + if (starget->hostdata) + kfree(starget->hostdata); + starget->hostdata = NULL; +} + +/* + * OS entry point to allow host driver to alloc memory + * for each scsi target. Called once per device the bus scan. + * Return non-zero if allocation fails. */ static int +mptfc_target_alloc(struct scsi_target *starget) +{ + VirtTarget *vtarget; + struct fc_rport *rport; + struct mptfc_rport_info *ri; + int rc; + + vtarget = kzalloc(sizeof(VirtTarget), GFP_KERNEL); + if (!vtarget) + return -ENOMEM; + starget->hostdata = vtarget; + + rc = -ENODEV; + rport = starget_to_rport(starget); + if (rport) { + ri = *((struct mptfc_rport_info **)rport->dd_data); + if (ri) { /* better be! */ + vtarget->target_id = ri->pg0.CurrentTargetID; + vtarget->bus_id = ri->pg0.CurrentBus; + ri->starget = starget; + ri->remap_needed = 0; + rc = 0; + } + } + if (rc != 0) { + kfree(vtarget); + starget->hostdata = NULL; + } + + return rc; +} + +/* + * OS entry point to allow host driver to alloc memory + * for each scsi device. Called once per device the bus scan. + * Return non-zero if allocation fails. + * Init memory once per LUN. + */ +int +mptfc_slave_alloc(struct scsi_device *sdev) +{ + MPT_SCSI_HOST *hd; + VirtTarget *vtarget; + VirtDevice *vdev; + struct scsi_target *starget; + struct fc_rport *rport; + unsigned long flags; + + + rport = starget_to_rport(scsi_target(sdev)); + + if (!rport || fc_remote_port_chkready(rport)) + return -ENXIO; + + hd = (MPT_SCSI_HOST *)sdev->host->hostdata; + + vdev = kzalloc(sizeof(VirtDevice), GFP_KERNEL); + if (!vdev) { + printk(MYIOC_s_ERR_FMT "slave_alloc kmalloc(%zd) FAILED!\n", + hd->ioc->name, sizeof(VirtDevice)); + return -ENOMEM; + } + + spin_lock_irqsave(&hd->ioc->fc_rport_lock,flags); + + sdev->hostdata = vdev; + starget = scsi_target(sdev); + vtarget = starget->hostdata; + + if (vtarget->num_luns == 0) { + vtarget->ioc_id = hd->ioc->id; + vtarget->tflags = MPT_TARGET_FLAGS_Q_YES | + MPT_TARGET_FLAGS_VALID_INQUIRY; + hd->Targets[sdev->id] = vtarget; + } + + vdev->vtarget = vtarget; + vdev->ioc_id = hd->ioc->id; + vdev->lun = sdev->lun; + vdev->target_id = vtarget->target_id; + vdev->bus_id = vtarget->bus_id; + + spin_unlock_irqrestore(&hd->ioc->fc_rport_lock,flags); + + vtarget->num_luns++; + + dfcprintk ((MYIOC_s_INFO_FMT + "mptfc_slv_alloc.%d: num_luns %d, sdev.id %d, " + "CurrentTargetID %d, %x %llx %llx\n", + ioc->name, + sdev->host->host_no, + vtarget->num_luns, + sdev->id, ri->pg0.CurrentTargetID, + ri->pg0.PortIdentifier, ri->pg0.WWPN, ri->pg0.WWNN)); + + return 0; +} + +static int +mptfc_qcmd(struct scsi_cmnd *SCpnt, void (*done)(struct scsi_cmnd *)) +{ + struct mptfc_rport_info *ri; + struct fc_rport *rport = starget_to_rport(scsi_target(SCpnt->device)); + int err; + + err = fc_remote_port_chkready(rport); + if (unlikely(err)) { + SCpnt->result = err; + done(SCpnt); + return 0; + } + ri = *((struct mptfc_rport_info **)rport->dd_data); + if (unlikely(ri->remap_needed)) + return SCSI_MLQUEUE_HOST_BUSY; + + return mptscsih_qcmd(SCpnt,done); +} + +static void +mptfc_init_host_attr(MPT_ADAPTER *ioc,int portnum) +{ + unsigned class = 0, cos = 0; + + /* don't know what to do as only one scsi (fc) host was allocated */ + if (portnum != 0) + return; + + class = ioc->fc_port_page0[portnum].SupportedServiceClass; + if (class & MPI_FCPORTPAGE0_SUPPORT_CLASS_1) + cos |= FC_COS_CLASS1; + if (class & MPI_FCPORTPAGE0_SUPPORT_CLASS_2) + cos |= FC_COS_CLASS2; + if (class & MPI_FCPORTPAGE0_SUPPORT_CLASS_3) + cos |= FC_COS_CLASS3; + + fc_host_node_name(ioc->sh) = + (u64)ioc->fc_port_page0[portnum].WWNN.High << 32 + | (u64)ioc->fc_port_page0[portnum].WWNN.Low; + + fc_host_port_name(ioc->sh) = + (u64)ioc->fc_port_page0[portnum].WWPN.High << 32 + | (u64)ioc->fc_port_page0[portnum].WWPN.Low; + + fc_host_port_id(ioc->sh) = ioc->fc_port_page0[portnum].PortIdentifier; + + fc_host_supported_classes(ioc->sh) = cos; + + fc_host_tgtid_bind_type(ioc->sh) = FC_TGTID_BIND_BY_WWPN; +} + +static void +mptfc_rescan_devices(void *arg) +{ + MPT_ADAPTER *ioc = (MPT_ADAPTER *)arg; + int ii; + int work_to_do; + unsigned long flags; + struct mptfc_rport_info *ri; + + do { + /* start by tagging all ports as missing */ + spin_lock_irqsave(&ioc->fc_rport_lock,flags); + list_for_each_entry(ri, &ioc->fc_rports, list) { + if (ri->flags & MPT_RPORT_INFO_FLAGS_REGISTERED) { + ri->flags |= MPT_RPORT_INFO_FLAGS_MISSING; + } + } + spin_unlock_irqrestore(&ioc->fc_rport_lock,flags); + + /* + * now rescan devices known to adapter, + * will reregister existing rports + */ + for (ii=0; ii < ioc->facts.NumberOfPorts; ii++) { + (void) mptbase_GetFcPortPage0(ioc, ii); + mptfc_init_host_attr(ioc,ii); /* refresh */ + mptfc_GetFcDevPage0(ioc,ii,mptfc_register_dev); + } + + /* delete devices still missing */ + spin_lock_irqsave(&ioc->fc_rport_lock, flags); + list_for_each_entry(ri, &ioc->fc_rports, list) { + /* if newly missing, delete it */ + if ((ri->flags & (MPT_RPORT_INFO_FLAGS_REGISTERED | + MPT_RPORT_INFO_FLAGS_MISSING)) + == (MPT_RPORT_INFO_FLAGS_REGISTERED | + MPT_RPORT_INFO_FLAGS_MISSING)) { + + ri->flags &= ~(MPT_RPORT_INFO_FLAGS_REGISTERED| + MPT_RPORT_INFO_FLAGS_MISSING); + ri->remap_needed = 1; + fc_remote_port_delete(ri->rport); + /* + * remote port not really deleted 'cause + * binding is by WWPN and driver only + * registers FCP_TARGETs but cannot trust + * data structures. + */ + ri->rport = NULL; + dfcprintk ((MYIOC_s_INFO_FMT + "mptfc_rescan.%d: %llx deleted\n", + ioc->name, + ioc->sh->host_no, + ri->pg0.WWPN)); + } + } + spin_unlock_irqrestore(&ioc->fc_rport_lock,flags); + + /* + * allow multiple passes as target state + * might have changed during scan + */ + spin_lock_irqsave(&ioc->fc_rescan_work_lock, flags); + if (ioc->fc_rescan_work_count > 2) /* only need one more */ + ioc->fc_rescan_work_count = 2; + work_to_do = --ioc->fc_rescan_work_count; + spin_unlock_irqrestore(&ioc->fc_rescan_work_lock, flags); + } while (work_to_do); +} + +static int mptfc_probe(struct pci_dev *pdev, const struct pci_device_id *id) { struct Scsi_Host *sh; MPT_SCSI_HOST *hd; MPT_ADAPTER *ioc; unsigned long flags; - int sz, ii; + int ii; int numSGE = 0; int scale; int ioc_cap; - u8 *mem; int error=0; int r; - + if ((r = mpt_attach(pdev,id)) != 0) return r; - + ioc = pci_get_drvdata(pdev); ioc->DoneCtx = mptfcDoneCtx; ioc->TaskCtx = mptfcTaskCtx; @@ -167,13 +724,15 @@ mptfc_probe(struct pci_dev *pdev, const struct pci_device_id *id) printk(MYIOC_s_WARN_FMT "Skipping because it's not operational!\n", ioc->name); - return -ENODEV; + error = -ENODEV; + goto out_mptfc_probe; } if (!ioc->active) { printk(MYIOC_s_WARN_FMT "Skipping because it's disabled!\n", ioc->name); - return -ENODEV; + error = -ENODEV; + goto out_mptfc_probe; } /* Sanity check - ensure at least 1 port is INITIATOR capable @@ -189,7 +748,7 @@ mptfc_probe(struct pci_dev *pdev, const struct pci_device_id *id) printk(MYIOC_s_WARN_FMT "Skipping ioc=%p because SCSI Initiator mode is NOT enabled!\n", ioc->name, ioc); - return 0; + return -ENODEV; } sh = scsi_host_alloc(&mptfc_driver_template, sizeof(MPT_SCSI_HOST)); @@ -198,9 +757,12 @@ mptfc_probe(struct pci_dev *pdev, const struct pci_device_id *id) printk(MYIOC_s_WARN_FMT "Unable to register controller with SCSI subsystem\n", ioc->name); - return -1; + error = -1; + goto out_mptfc_probe; } + INIT_WORK(&ioc->fc_rescan_work, mptfc_rescan_devices,(void *)ioc); + spin_lock_irqsave(&ioc->FreeQlock, flags); /* Attach the SCSI Host to the IOC structure @@ -262,36 +824,27 @@ mptfc_probe(struct pci_dev *pdev, const struct pci_device_id *id) /* SCSI needs scsi_cmnd lookup table! * (with size equal to req_depth*PtrSz!) */ - sz = ioc->req_depth * sizeof(void *); - mem = kmalloc(sz, GFP_ATOMIC); - if (mem == NULL) { + hd->ScsiLookup = kcalloc(ioc->req_depth, sizeof(void *), GFP_ATOMIC); + if (!hd->ScsiLookup) { error = -ENOMEM; - goto mptfc_probe_failed; + goto out_mptfc_probe; } - memset(mem, 0, sz); - hd->ScsiLookup = (struct scsi_cmnd **) mem; - - dprintk((MYIOC_s_INFO_FMT "ScsiLookup @ %p, sz=%d\n", - ioc->name, hd->ScsiLookup, sz)); + dprintk((MYIOC_s_INFO_FMT "ScsiLookup @ %p\n", + ioc->name, hd->ScsiLookup)); /* Allocate memory for the device structures. * A non-Null pointer at an offset * indicates a device exists. * max_id = 1 + maximum id (hosts.h) */ - sz = sh->max_id * sizeof(void *); - mem = kmalloc(sz, GFP_ATOMIC); - if (mem == NULL) { + hd->Targets = kcalloc(sh->max_id, sizeof(void *), GFP_ATOMIC); + if (!hd->Targets) { error = -ENOMEM; - goto mptfc_probe_failed; + goto out_mptfc_probe; } - memset(mem, 0, sz); - hd->Targets = (VirtDevice **) mem; - - dprintk((KERN_INFO - " Targets @ %p, sz=%d\n", hd->Targets, sz)); + dprintk((KERN_INFO " vdev @ %p\n", hd->Targets)); /* Clear the TM flags */ @@ -326,17 +879,22 @@ mptfc_probe(struct pci_dev *pdev, const struct pci_device_id *id) hd->scandv_wait_done = 0; hd->last_queue_full = 0; + sh->transportt = mptfc_transport_template; error = scsi_add_host (sh, &ioc->pcidev->dev); if(error) { dprintk((KERN_ERR MYNAM "scsi_add_host failed\n")); - goto mptfc_probe_failed; + goto out_mptfc_probe; + } + + for (ii=0; ii < ioc->facts.NumberOfPorts; ii++) { + mptfc_init_host_attr(ioc,ii); + mptfc_GetFcDevPage0(ioc,ii,mptfc_register_dev); } - scsi_scan_host(sh); return 0; -mptfc_probe_failed: +out_mptfc_probe: mptscsih_remove(pdev); return error; @@ -346,7 +904,7 @@ static struct pci_driver mptfc_driver = { .name = "mptfc", .id_table = mptfc_pci_table, .probe = mptfc_probe, - .remove = __devexit_p(mptscsih_remove), + .remove = __devexit_p(mptfc_remove), .shutdown = mptscsih_shutdown, #ifdef CONFIG_PM .suspend = mptscsih_suspend, @@ -364,9 +922,20 @@ static struct pci_driver mptfc_driver = { static int __init mptfc_init(void) { + int error; show_mptmod_ver(my_NAME, my_VERSION); + /* sanity check module parameter */ + if (mptfc_dev_loss_tmo == 0) + mptfc_dev_loss_tmo = MPTFC_DEV_LOSS_TMO; + + mptfc_transport_template = + fc_attach_transport(&mptfc_transport_functions); + + if (!mptfc_transport_template) + return -ENODEV; + mptfcDoneCtx = mpt_register(mptscsih_io_done, MPTFC_DRIVER); mptfcTaskCtx = mpt_register(mptscsih_taskmgmt_complete, MPTFC_DRIVER); mptfcInternalCtx = mpt_register(mptscsih_scandv_complete, MPTFC_DRIVER); @@ -381,7 +950,33 @@ mptfc_init(void) ": Registered for IOC reset notifications\n")); } - return pci_register_driver(&mptfc_driver); + error = pci_register_driver(&mptfc_driver); + if (error) + fc_release_transport(mptfc_transport_template); + + return error; +} + +/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ +/** + * mptfc_remove - Removed fc infrastructure for devices + * @pdev: Pointer to pci_dev structure + * + */ +static void __devexit +mptfc_remove(struct pci_dev *pdev) +{ + MPT_ADAPTER *ioc = pci_get_drvdata(pdev); + struct mptfc_rport_info *p, *n; + + fc_remove_host(ioc->sh); + + list_for_each_entry_safe(p, n, &ioc->fc_rports, list) { + list_del(&p->list); + kfree(p); + } + + mptscsih_remove(pdev); } /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ @@ -394,7 +989,8 @@ static void __exit mptfc_exit(void) { pci_unregister_driver(&mptfc_driver); - + fc_release_transport(mptfc_transport_template); + mpt_reset_deregister(mptfcDoneCtx); dprintk((KERN_INFO MYNAM ": Deregistered for IOC reset notifications\n")); diff --git a/drivers/message/fusion/mptlan.c b/drivers/message/fusion/mptlan.c index 014085d8ec8..73f59528212 100644 --- a/drivers/message/fusion/mptlan.c +++ b/drivers/message/fusion/mptlan.c @@ -411,14 +411,12 @@ mpt_lan_open(struct net_device *dev) goto out; priv->mpt_txfidx_tail = -1; - priv->SendCtl = kmalloc(priv->tx_max_out * sizeof(struct BufferControl), + priv->SendCtl = kcalloc(priv->tx_max_out, sizeof(struct BufferControl), GFP_KERNEL); if (priv->SendCtl == NULL) goto out_mpt_txfidx; - for (i = 0; i < priv->tx_max_out; i++) { - memset(&priv->SendCtl[i], 0, sizeof(struct BufferControl)); + for (i = 0; i < priv->tx_max_out; i++) priv->mpt_txfidx[++priv->mpt_txfidx_tail] = i; - } dlprintk((KERN_INFO MYNAM "@lo: Finished initializing SendCtl\n")); @@ -428,15 +426,13 @@ mpt_lan_open(struct net_device *dev) goto out_SendCtl; priv->mpt_rxfidx_tail = -1; - priv->RcvCtl = kmalloc(priv->max_buckets_out * - sizeof(struct BufferControl), + priv->RcvCtl = kcalloc(priv->max_buckets_out, + sizeof(struct BufferControl), GFP_KERNEL); if (priv->RcvCtl == NULL) goto out_mpt_rxfidx; - for (i = 0; i < priv->max_buckets_out; i++) { - memset(&priv->RcvCtl[i], 0, sizeof(struct BufferControl)); + for (i = 0; i < priv->max_buckets_out; i++) priv->mpt_rxfidx[++priv->mpt_rxfidx_tail] = i; - } /**/ dlprintk((KERN_INFO MYNAM "/lo: txfidx contains - ")); /**/ for (i = 0; i < priv->tx_max_out; i++) @@ -848,7 +844,7 @@ mpt_lan_sdu_send (struct sk_buff *skb, struct net_device *dev) } /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ -static inline void +static void mpt_lan_wake_post_buckets_task(struct net_device *dev, int priority) /* * @priority: 0 = put it on the timer queue, 1 = put it on the immediate queue @@ -870,7 +866,7 @@ mpt_lan_wake_post_buckets_task(struct net_device *dev, int priority) } /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ -static inline int +static int mpt_lan_receive_skb(struct net_device *dev, struct sk_buff *skb) { struct mpt_lan_priv *priv = dev->priv; diff --git a/drivers/message/fusion/mptsas.c b/drivers/message/fusion/mptsas.c index e0a8bb8ba7d..2512d0e6155 100644 --- a/drivers/message/fusion/mptsas.c +++ b/drivers/message/fusion/mptsas.c @@ -5,7 +5,7 @@ * * Copyright (c) 1999-2005 LSI Logic Corporation * (mailto:mpt_linux_developer@lsil.com) - * Copyright (c) 2005 Dell + * Copyright (c) 2005-2006 Dell */ /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ /* @@ -86,6 +86,26 @@ static int mptsasInternalCtx = -1; /* Used only for internal commands */ static int mptsasMgmtCtx = -1; +enum mptsas_hotplug_action { + MPTSAS_ADD_DEVICE, + MPTSAS_DEL_DEVICE, + MPTSAS_ADD_RAID, + MPTSAS_DEL_RAID, +}; + +struct mptsas_hotplug_event { + struct work_struct work; + MPT_ADAPTER *ioc; + enum mptsas_hotplug_action event_type; + u64 sas_address; + u32 channel; + u32 id; + u32 device_info; + u16 handle; + u16 parent_handle; + u8 phy_id; +}; + /* * SAS topology structures * @@ -96,11 +116,12 @@ static int mptsasMgmtCtx = -1; struct mptsas_devinfo { u16 handle; /* unique id to address this device */ + u16 handle_parent; /* unique id to address parent device */ u8 phy_id; /* phy number of parent device */ u8 port_id; /* sas physical port this device is assoc'd with */ - u8 target; /* logical target id of this device */ - u8 bus; /* logical bus number of this device */ + u8 id; /* logical target id of this device */ + u8 channel; /* logical bus number of this device */ u64 sas_address; /* WWN of this device, SATA is assigned by HBA,expander */ u32 device_info; /* bitfield detailed info about this device */ @@ -114,6 +135,7 @@ struct mptsas_phyinfo { u8 programmed_link_rate; /* programmed max/min phy link rate */ struct mptsas_devinfo identify; /* point to phy device info */ struct mptsas_devinfo attached; /* point to attached device info */ + struct sas_phy *phy; struct sas_rphy *rphy; }; @@ -228,63 +250,141 @@ static void mptsas_print_expander_pg1(SasExpanderPage1_t *pg1) * implement ->target_alloc. */ static int -mptsas_slave_alloc(struct scsi_device *device) +mptsas_slave_alloc(struct scsi_device *sdev) { - struct Scsi_Host *host = device->host; + struct Scsi_Host *host = sdev->host; MPT_SCSI_HOST *hd = (MPT_SCSI_HOST *)host->hostdata; struct sas_rphy *rphy; struct mptsas_portinfo *p; + VirtTarget *vtarget; VirtDevice *vdev; - uint target = device->id; + struct scsi_target *starget; int i; - if ((vdev = hd->Targets[target]) != NULL) - goto out; - - vdev = kmalloc(sizeof(VirtDevice), GFP_KERNEL); + vdev = kzalloc(sizeof(VirtDevice), GFP_KERNEL); if (!vdev) { printk(MYIOC_s_ERR_FMT "slave_alloc kmalloc(%zd) FAILED!\n", hd->ioc->name, sizeof(VirtDevice)); return -ENOMEM; } - - memset(vdev, 0, sizeof(VirtDevice)); - vdev->tflags = MPT_TARGET_FLAGS_Q_YES|MPT_TARGET_FLAGS_VALID_INQUIRY; vdev->ioc_id = hd->ioc->id; + sdev->hostdata = vdev; + starget = scsi_target(sdev); + vtarget = starget->hostdata; + vdev->vtarget = vtarget; + if (vtarget->num_luns == 0) { + vtarget->tflags = MPT_TARGET_FLAGS_Q_YES|MPT_TARGET_FLAGS_VALID_INQUIRY; + hd->Targets[sdev->id] = vtarget; + } - rphy = dev_to_rphy(device->sdev_target->dev.parent); + /* + RAID volumes placed beyond the last expected port. + */ + if (sdev->channel == hd->ioc->num_ports) { + vdev->target_id = sdev->id; + vdev->bus_id = 0; + vdev->lun = 0; + goto out; + } + + rphy = dev_to_rphy(sdev->sdev_target->dev.parent); + mutex_lock(&hd->ioc->sas_topology_mutex); list_for_each_entry(p, &hd->ioc->sas_topology, list) { for (i = 0; i < p->num_phys; i++) { if (p->phy_info[i].attached.sas_address == rphy->identify.sas_address) { vdev->target_id = - p->phy_info[i].attached.target; - vdev->bus_id = p->phy_info[i].attached.bus; - hd->Targets[device->id] = vdev; + p->phy_info[i].attached.id; + vdev->bus_id = p->phy_info[i].attached.channel; + vdev->lun = sdev->lun; + mutex_unlock(&hd->ioc->sas_topology_mutex); goto out; } } } + mutex_unlock(&hd->ioc->sas_topology_mutex); - printk("No matching SAS device found!!\n"); kfree(vdev); - return -ENODEV; + return -ENXIO; out: - vdev->num_luns++; - device->hostdata = vdev; + vtarget->ioc_id = vdev->ioc_id; + vtarget->target_id = vdev->target_id; + vtarget->bus_id = vdev->bus_id; + vtarget->num_luns++; return 0; } +static void +mptsas_slave_destroy(struct scsi_device *sdev) +{ + struct Scsi_Host *host = sdev->host; + MPT_SCSI_HOST *hd = (MPT_SCSI_HOST *)host->hostdata; + struct sas_rphy *rphy; + struct mptsas_portinfo *p; + int i; + VirtDevice *vdev; + + /* + * Handle hotplug removal case. + * We need to clear out attached data structure. + */ + rphy = dev_to_rphy(sdev->sdev_target->dev.parent); + + mutex_lock(&hd->ioc->sas_topology_mutex); + list_for_each_entry(p, &hd->ioc->sas_topology, list) { + for (i = 0; i < p->num_phys; i++) { + if (p->phy_info[i].attached.sas_address == + rphy->identify.sas_address) { + memset(&p->phy_info[i].attached, 0, + sizeof(struct mptsas_devinfo)); + p->phy_info[i].rphy = NULL; + goto out; + } + } + } + + out: + mutex_unlock(&hd->ioc->sas_topology_mutex); + /* + * Issue target reset to flush firmware outstanding commands. + */ + vdev = sdev->hostdata; + if (vdev->configured_lun){ + if (mptscsih_TMHandler(hd, + MPI_SCSITASKMGMT_TASKTYPE_TARGET_RESET, + vdev->bus_id, + vdev->target_id, + 0, 0, 5 /* 5 second timeout */) + < 0){ + + /* The TM request failed! + * Fatal error case. + */ + printk(MYIOC_s_WARN_FMT + "Error processing TaskMgmt id=%d TARGET_RESET\n", + hd->ioc->name, + vdev->target_id); + + hd->tmPending = 0; + hd->tmState = TM_STATE_NONE; + } + } + mptscsih_slave_destroy(sdev); +} + static struct scsi_host_template mptsas_driver_template = { + .module = THIS_MODULE, .proc_name = "mptsas", .proc_info = mptscsih_proc_info, .name = "MPT SPI Host", .info = mptscsih_info, .queuecommand = mptscsih_qcmd, + .target_alloc = mptscsih_target_alloc, .slave_alloc = mptsas_slave_alloc, .slave_configure = mptscsih_slave_configure, - .slave_destroy = mptscsih_slave_destroy, + .target_destroy = mptscsih_target_destroy, + .slave_destroy = mptsas_slave_destroy, .change_queue_depth = mptscsih_change_queue_depth, .eh_abort_handler = mptscsih_abort, .eh_device_reset_handler = mptscsih_dev_reset, @@ -390,7 +490,7 @@ static int mptsas_phy_reset(struct sas_phy *phy, int hard_reset) if (phy->identify.target_port_protocols & SAS_PROTOCOL_SMP) return -ENXIO; - if (down_interruptible(&ioc->sas_mgmt.mutex)) + if (mutex_lock_interruptible(&ioc->sas_mgmt.mutex)) goto out; mf = mpt_get_msg_frame(mptsasMgmtCtx, ioc); @@ -441,7 +541,7 @@ static int mptsas_phy_reset(struct sas_phy *phy, int hard_reset) error = 0; out_unlock: - up(&ioc->sas_mgmt.mutex); + mutex_unlock(&ioc->sas_mgmt.mutex); out: return error; } @@ -638,10 +738,11 @@ mptsas_sas_device_pg0(MPT_ADAPTER *ioc, struct mptsas_devinfo *device_info, mptsas_print_device_pg0(buffer); device_info->handle = le16_to_cpu(buffer->DevHandle); + device_info->handle_parent = le16_to_cpu(buffer->ParentDevHandle); device_info->phy_id = buffer->PhyNum; device_info->port_id = buffer->PhysicalPort; - device_info->target = buffer->TargetID; - device_info->bus = buffer->Bus; + device_info->id = buffer->TargetID; + device_info->channel = buffer->Bus; memcpy(&sas_address, &buffer->SASAddress, sizeof(__le64)); device_info->sas_address = le64_to_cpu(sas_address); device_info->device_info = @@ -787,6 +888,26 @@ mptsas_sas_expander_pg1(MPT_ADAPTER *ioc, struct mptsas_phyinfo *phy_info, return error; } +/* + * Returns true if there is a scsi end device + */ +static inline int +mptsas_is_end_device(struct mptsas_devinfo * attached) +{ + if ((attached->handle) && + (attached->device_info & + MPI_SAS_DEVICE_INFO_END_DEVICE) && + ((attached->device_info & + MPI_SAS_DEVICE_INFO_SSP_TARGET) | + (attached->device_info & + MPI_SAS_DEVICE_INFO_STP_TARGET) | + (attached->device_info & + MPI_SAS_DEVICE_INFO_SATA_DEVICE))) + return 1; + else + return 0; +} + static void mptsas_parse_device_info(struct sas_identify *identify, struct mptsas_devinfo *device_info) @@ -849,36 +970,36 @@ mptsas_parse_device_info(struct sas_identify *identify, static int mptsas_probe_one_phy(struct device *dev, struct mptsas_phyinfo *phy_info, int index, int local) { - struct sas_phy *port; + struct sas_phy *phy; int error; - port = sas_phy_alloc(dev, index); - if (!port) + phy = sas_phy_alloc(dev, index); + if (!phy) return -ENOMEM; - port->port_identifier = phy_info->port_id; - mptsas_parse_device_info(&port->identify, &phy_info->identify); + phy->port_identifier = phy_info->port_id; + mptsas_parse_device_info(&phy->identify, &phy_info->identify); /* * Set Negotiated link rate. */ switch (phy_info->negotiated_link_rate) { case MPI_SAS_IOUNIT0_RATE_PHY_DISABLED: - port->negotiated_linkrate = SAS_PHY_DISABLED; + phy->negotiated_linkrate = SAS_PHY_DISABLED; break; case MPI_SAS_IOUNIT0_RATE_FAILED_SPEED_NEGOTIATION: - port->negotiated_linkrate = SAS_LINK_RATE_FAILED; + phy->negotiated_linkrate = SAS_LINK_RATE_FAILED; break; case MPI_SAS_IOUNIT0_RATE_1_5: - port->negotiated_linkrate = SAS_LINK_RATE_1_5_GBPS; + phy->negotiated_linkrate = SAS_LINK_RATE_1_5_GBPS; break; case MPI_SAS_IOUNIT0_RATE_3_0: - port->negotiated_linkrate = SAS_LINK_RATE_3_0_GBPS; + phy->negotiated_linkrate = SAS_LINK_RATE_3_0_GBPS; break; case MPI_SAS_IOUNIT0_RATE_SATA_OOB_COMPLETE: case MPI_SAS_IOUNIT0_RATE_UNKNOWN: default: - port->negotiated_linkrate = SAS_LINK_RATE_UNKNOWN; + phy->negotiated_linkrate = SAS_LINK_RATE_UNKNOWN; break; } @@ -887,10 +1008,10 @@ static int mptsas_probe_one_phy(struct device *dev, */ switch (phy_info->hw_link_rate & MPI_SAS_PHY0_PRATE_MAX_RATE_MASK) { case MPI_SAS_PHY0_HWRATE_MAX_RATE_1_5: - port->maximum_linkrate_hw = SAS_LINK_RATE_1_5_GBPS; + phy->maximum_linkrate_hw = SAS_LINK_RATE_1_5_GBPS; break; case MPI_SAS_PHY0_PRATE_MAX_RATE_3_0: - port->maximum_linkrate_hw = SAS_LINK_RATE_3_0_GBPS; + phy->maximum_linkrate_hw = SAS_LINK_RATE_3_0_GBPS; break; default: break; @@ -902,10 +1023,10 @@ static int mptsas_probe_one_phy(struct device *dev, switch (phy_info->programmed_link_rate & MPI_SAS_PHY0_PRATE_MAX_RATE_MASK) { case MPI_SAS_PHY0_PRATE_MAX_RATE_1_5: - port->maximum_linkrate = SAS_LINK_RATE_1_5_GBPS; + phy->maximum_linkrate = SAS_LINK_RATE_1_5_GBPS; break; case MPI_SAS_PHY0_PRATE_MAX_RATE_3_0: - port->maximum_linkrate = SAS_LINK_RATE_3_0_GBPS; + phy->maximum_linkrate = SAS_LINK_RATE_3_0_GBPS; break; default: break; @@ -916,10 +1037,10 @@ static int mptsas_probe_one_phy(struct device *dev, */ switch (phy_info->hw_link_rate & MPI_SAS_PHY0_HWRATE_MIN_RATE_MASK) { case MPI_SAS_PHY0_HWRATE_MIN_RATE_1_5: - port->minimum_linkrate_hw = SAS_LINK_RATE_1_5_GBPS; + phy->minimum_linkrate_hw = SAS_LINK_RATE_1_5_GBPS; break; case MPI_SAS_PHY0_PRATE_MIN_RATE_3_0: - port->minimum_linkrate_hw = SAS_LINK_RATE_3_0_GBPS; + phy->minimum_linkrate_hw = SAS_LINK_RATE_3_0_GBPS; break; default: break; @@ -931,28 +1052,29 @@ static int mptsas_probe_one_phy(struct device *dev, switch (phy_info->programmed_link_rate & MPI_SAS_PHY0_PRATE_MIN_RATE_MASK) { case MPI_SAS_PHY0_PRATE_MIN_RATE_1_5: - port->minimum_linkrate = SAS_LINK_RATE_1_5_GBPS; + phy->minimum_linkrate = SAS_LINK_RATE_1_5_GBPS; break; case MPI_SAS_PHY0_PRATE_MIN_RATE_3_0: - port->minimum_linkrate = SAS_LINK_RATE_3_0_GBPS; + phy->minimum_linkrate = SAS_LINK_RATE_3_0_GBPS; break; default: break; } if (local) - port->local_attached = 1; + phy->local_attached = 1; - error = sas_phy_add(port); + error = sas_phy_add(phy); if (error) { - sas_phy_free(port); + sas_phy_free(phy); return error; } + phy_info->phy = phy; if (phy_info->attached.handle) { struct sas_rphy *rphy; - rphy = sas_rphy_alloc(port); + rphy = sas_rphy_alloc(phy); if (!rphy) return 0; /* non-fatal: an rphy can be added later */ @@ -976,16 +1098,18 @@ mptsas_probe_hba_phys(MPT_ADAPTER *ioc, int *index) u32 handle = 0xFFFF; int error = -ENOMEM, i; - port_info = kmalloc(sizeof(*port_info), GFP_KERNEL); + port_info = kzalloc(sizeof(*port_info), GFP_KERNEL); if (!port_info) goto out; - memset(port_info, 0, sizeof(*port_info)); error = mptsas_sas_io_unit_pg0(ioc, port_info); if (error) goto out_free_port_info; + ioc->num_ports = port_info->num_phys; + mutex_lock(&ioc->sas_topology_mutex); list_add_tail(&port_info->list, &ioc->sas_topology); + mutex_unlock(&ioc->sas_topology_mutex); for (i = 0; i < port_info->num_phys; i++) { mptsas_sas_phy_pg0(ioc, &port_info->phy_info[i], @@ -1026,10 +1150,9 @@ mptsas_probe_expander_phys(MPT_ADAPTER *ioc, u32 *handle, int *index) struct mptsas_portinfo *port_info, *p; int error = -ENOMEM, i, j; - port_info = kmalloc(sizeof(*port_info), GFP_KERNEL); + port_info = kzalloc(sizeof(*port_info), GFP_KERNEL); if (!port_info) goto out; - memset(port_info, 0, sizeof(*port_info)); error = mptsas_sas_expander_pg0(ioc, port_info, (MPI_SAS_EXPAND_PGAD_FORM_GET_NEXT_HANDLE << @@ -1039,7 +1162,10 @@ mptsas_probe_expander_phys(MPT_ADAPTER *ioc, u32 *handle, int *index) *handle = port_info->handle; + mutex_lock(&ioc->sas_topology_mutex); list_add_tail(&port_info->list, &ioc->sas_topology); + mutex_unlock(&ioc->sas_topology_mutex); + for (i = 0; i < port_info->num_phys; i++) { struct device *parent; @@ -1071,6 +1197,7 @@ mptsas_probe_expander_phys(MPT_ADAPTER *ioc, u32 *handle, int *index) * HBA phys. */ parent = &ioc->sh->shost_gendev; + mutex_lock(&ioc->sas_topology_mutex); list_for_each_entry(p, &ioc->sas_topology, list) { for (j = 0; j < p->num_phys; j++) { if (port_info->phy_info[i].identify.handle == @@ -1078,6 +1205,7 @@ mptsas_probe_expander_phys(MPT_ADAPTER *ioc, u32 *handle, int *index) parent = &p->phy_info[j].rphy->dev; } } + mutex_unlock(&ioc->sas_topology_mutex); mptsas_probe_one_phy(parent, &port_info->phy_info[i], *index, 0); @@ -1103,6 +1231,351 @@ mptsas_scan_sas_topology(MPT_ADAPTER *ioc) ; } +static struct mptsas_phyinfo * +mptsas_find_phyinfo_by_parent(MPT_ADAPTER *ioc, u16 parent_handle, u8 phy_id) +{ + struct mptsas_portinfo *port_info; + struct mptsas_devinfo device_info; + struct mptsas_phyinfo *phy_info = NULL; + int i, error; + + /* + * Retrieve the parent sas_address + */ + error = mptsas_sas_device_pg0(ioc, &device_info, + (MPI_SAS_DEVICE_PGAD_FORM_HANDLE << + MPI_SAS_DEVICE_PGAD_FORM_SHIFT), + parent_handle); + if (error) { + printk("mptsas: failed to retrieve device page\n"); + return NULL; + } + + /* + * The phy_info structures are never deallocated during lifetime of + * a host, so the code below is safe without additional refcounting. + */ + mutex_lock(&ioc->sas_topology_mutex); + list_for_each_entry(port_info, &ioc->sas_topology, list) { + for (i = 0; i < port_info->num_phys; i++) { + if (port_info->phy_info[i].identify.sas_address == + device_info.sas_address && + port_info->phy_info[i].phy_id == phy_id) { + phy_info = &port_info->phy_info[i]; + break; + } + } + } + mutex_unlock(&ioc->sas_topology_mutex); + + return phy_info; +} + +static struct mptsas_phyinfo * +mptsas_find_phyinfo_by_target(MPT_ADAPTER *ioc, u32 id) +{ + struct mptsas_portinfo *port_info; + struct mptsas_phyinfo *phy_info = NULL; + int i; + + /* + * The phy_info structures are never deallocated during lifetime of + * a host, so the code below is safe without additional refcounting. + */ + mutex_lock(&ioc->sas_topology_mutex); + list_for_each_entry(port_info, &ioc->sas_topology, list) { + for (i = 0; i < port_info->num_phys; i++) + if (mptsas_is_end_device(&port_info->phy_info[i].attached)) + if (port_info->phy_info[i].attached.id == id) { + phy_info = &port_info->phy_info[i]; + break; + } + } + mutex_unlock(&ioc->sas_topology_mutex); + + return phy_info; +} + +static void +mptsas_hotplug_work(void *arg) +{ + struct mptsas_hotplug_event *ev = arg; + MPT_ADAPTER *ioc = ev->ioc; + struct mptsas_phyinfo *phy_info; + struct sas_rphy *rphy; + struct scsi_device *sdev; + char *ds = NULL; + struct mptsas_devinfo sas_device; + + switch (ev->event_type) { + case MPTSAS_DEL_DEVICE: + + phy_info = mptsas_find_phyinfo_by_target(ioc, ev->id); + if (!phy_info) { + printk("mptsas: remove event for non-existant PHY.\n"); + break; + } + + if (phy_info->attached.device_info & MPI_SAS_DEVICE_INFO_SSP_TARGET) + ds = "ssp"; + if (phy_info->attached.device_info & MPI_SAS_DEVICE_INFO_STP_TARGET) + ds = "stp"; + if (phy_info->attached.device_info & MPI_SAS_DEVICE_INFO_SATA_DEVICE) + ds = "sata"; + + printk(MYIOC_s_INFO_FMT + "removing %s device, channel %d, id %d, phy %d\n", + ioc->name, ds, ev->channel, ev->id, phy_info->phy_id); + + if (phy_info->rphy) { + sas_rphy_delete(phy_info->rphy); + phy_info->rphy = NULL; + } + break; + case MPTSAS_ADD_DEVICE: + + /* + * When there is no sas address, + * RAID volumes are being deleted, + * and hidden phy disk are being added. + * We don't know the SAS data yet, + * so lookup sas device page to get + * pertaining info + */ + if (!ev->sas_address) { + if (mptsas_sas_device_pg0(ioc, + &sas_device, ev->id, + (MPI_SAS_DEVICE_PGAD_FORM_BUS_TARGET_ID << + MPI_SAS_DEVICE_PGAD_FORM_SHIFT))) + break; + ev->handle = sas_device.handle; + ev->parent_handle = sas_device.handle_parent; + ev->channel = sas_device.channel; + ev->phy_id = sas_device.phy_id; + ev->sas_address = sas_device.sas_address; + ev->device_info = sas_device.device_info; + } + + phy_info = mptsas_find_phyinfo_by_parent(ioc, + ev->parent_handle, ev->phy_id); + if (!phy_info) { + printk("mptsas: add event for non-existant PHY.\n"); + break; + } + + if (phy_info->rphy) { + printk("mptsas: trying to add existing device.\n"); + break; + } + + /* fill attached info */ + phy_info->attached.handle = ev->handle; + phy_info->attached.phy_id = ev->phy_id; + phy_info->attached.port_id = phy_info->identify.port_id; + phy_info->attached.id = ev->id; + phy_info->attached.channel = ev->channel; + phy_info->attached.sas_address = ev->sas_address; + phy_info->attached.device_info = ev->device_info; + + if (phy_info->attached.device_info & MPI_SAS_DEVICE_INFO_SSP_TARGET) + ds = "ssp"; + if (phy_info->attached.device_info & MPI_SAS_DEVICE_INFO_STP_TARGET) + ds = "stp"; + if (phy_info->attached.device_info & MPI_SAS_DEVICE_INFO_SATA_DEVICE) + ds = "sata"; + + printk(MYIOC_s_INFO_FMT + "attaching %s device, channel %d, id %d, phy %d\n", + ioc->name, ds, ev->channel, ev->id, ev->phy_id); + + + rphy = sas_rphy_alloc(phy_info->phy); + if (!rphy) + break; /* non-fatal: an rphy can be added later */ + + rphy->scsi_target_id = phy_info->attached.id; + mptsas_parse_device_info(&rphy->identify, &phy_info->attached); + if (sas_rphy_add(rphy)) { + sas_rphy_free(rphy); + break; + } + + phy_info->rphy = rphy; + break; + case MPTSAS_ADD_RAID: + sdev = scsi_device_lookup( + ioc->sh, + ioc->num_ports, + ev->id, + 0); + if (sdev) { + scsi_device_put(sdev); + break; + } + printk(MYIOC_s_INFO_FMT + "attaching device, channel %d, id %d\n", + ioc->name, ioc->num_ports, ev->id); + scsi_add_device(ioc->sh, + ioc->num_ports, + ev->id, + 0); + mpt_findImVolumes(ioc); + break; + case MPTSAS_DEL_RAID: + sdev = scsi_device_lookup( + ioc->sh, + ioc->num_ports, + ev->id, + 0); + if (!sdev) + break; + printk(MYIOC_s_INFO_FMT + "removing device, channel %d, id %d\n", + ioc->name, ioc->num_ports, ev->id); + scsi_remove_device(sdev); + scsi_device_put(sdev); + mpt_findImVolumes(ioc); + break; + } + + kfree(ev); +} + +static void +mptscsih_send_sas_event(MPT_ADAPTER *ioc, + EVENT_DATA_SAS_DEVICE_STATUS_CHANGE *sas_event_data) +{ + struct mptsas_hotplug_event *ev; + u32 device_info = le32_to_cpu(sas_event_data->DeviceInfo); + __le64 sas_address; + + if ((device_info & + (MPI_SAS_DEVICE_INFO_SSP_TARGET | + MPI_SAS_DEVICE_INFO_STP_TARGET | + MPI_SAS_DEVICE_INFO_SATA_DEVICE )) == 0) + return; + + if ((sas_event_data->ReasonCode & + (MPI_EVENT_SAS_DEV_STAT_RC_ADDED | + MPI_EVENT_SAS_DEV_STAT_RC_NOT_RESPONDING)) == 0) + return; + + ev = kmalloc(sizeof(*ev), GFP_ATOMIC); + if (!ev) { + printk(KERN_WARNING "mptsas: lost hotplug event\n"); + return; + } + + + INIT_WORK(&ev->work, mptsas_hotplug_work, ev); + ev->ioc = ioc; + ev->handle = le16_to_cpu(sas_event_data->DevHandle); + ev->parent_handle = le16_to_cpu(sas_event_data->ParentDevHandle); + ev->channel = sas_event_data->Bus; + ev->id = sas_event_data->TargetID; + ev->phy_id = sas_event_data->PhyNum; + memcpy(&sas_address, &sas_event_data->SASAddress, sizeof(__le64)); + ev->sas_address = le64_to_cpu(sas_address); + ev->device_info = device_info; + + if (sas_event_data->ReasonCode & MPI_EVENT_SAS_DEV_STAT_RC_ADDED) + ev->event_type = MPTSAS_ADD_DEVICE; + else + ev->event_type = MPTSAS_DEL_DEVICE; + + schedule_work(&ev->work); +} + +static void +mptscsih_send_raid_event(MPT_ADAPTER *ioc, + EVENT_DATA_RAID *raid_event_data) +{ + struct mptsas_hotplug_event *ev; + RAID_VOL0_STATUS * volumeStatus; + + if (ioc->bus_type != SAS) + return; + + ev = kmalloc(sizeof(*ev), GFP_ATOMIC); + if (!ev) { + printk(KERN_WARNING "mptsas: lost hotplug event\n"); + return; + } + + memset(ev,0,sizeof(struct mptsas_hotplug_event)); + INIT_WORK(&ev->work, mptsas_hotplug_work, ev); + ev->ioc = ioc; + ev->id = raid_event_data->VolumeID; + + switch (raid_event_data->ReasonCode) { + case MPI_EVENT_RAID_RC_PHYSDISK_DELETED: + ev->event_type = MPTSAS_ADD_DEVICE; + break; + case MPI_EVENT_RAID_RC_PHYSDISK_CREATED: + ev->event_type = MPTSAS_DEL_DEVICE; + break; + case MPI_EVENT_RAID_RC_VOLUME_DELETED: + ev->event_type = MPTSAS_DEL_RAID; + break; + case MPI_EVENT_RAID_RC_VOLUME_CREATED: + ev->event_type = MPTSAS_ADD_RAID; + break; + case MPI_EVENT_RAID_RC_VOLUME_STATUS_CHANGED: + volumeStatus = (RAID_VOL0_STATUS *) & + raid_event_data->SettingsStatus; + ev->event_type = (volumeStatus->State == + MPI_RAIDVOL0_STATUS_STATE_FAILED) ? + MPTSAS_DEL_RAID : MPTSAS_ADD_RAID; + break; + default: + break; + } + schedule_work(&ev->work); +} + +/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ +/* work queue thread to clear the persitency table */ +static void +mptscsih_sas_persist_clear_table(void * arg) +{ + MPT_ADAPTER *ioc = (MPT_ADAPTER *)arg; + + mptbase_sas_persist_operation(ioc, MPI_SAS_OP_CLEAR_NOT_PRESENT); +} + +static int +mptsas_event_process(MPT_ADAPTER *ioc, EventNotificationReply_t *reply) +{ + int rc=1; + u8 event = le32_to_cpu(reply->Event) & 0xFF; + + if (!ioc->sh) + goto out; + + switch (event) { + case MPI_EVENT_SAS_DEVICE_STATUS_CHANGE: + mptscsih_send_sas_event(ioc, + (EVENT_DATA_SAS_DEVICE_STATUS_CHANGE *)reply->Data); + break; + case MPI_EVENT_INTEGRATED_RAID: + mptscsih_send_raid_event(ioc, + (EVENT_DATA_RAID *)reply->Data); + break; + case MPI_EVENT_PERSISTENT_TABLE_FULL: + INIT_WORK(&ioc->mptscsih_persistTask, + mptscsih_sas_persist_clear_table, + (void *)ioc); + schedule_work(&ioc->mptscsih_persistTask); + break; + default: + rc = mptscsih_event_process(ioc, reply); + break; + } + out: + + return rc; +} + static int mptsas_probe(struct pci_dev *pdev, const struct pci_device_id *id) { @@ -1110,11 +1583,10 @@ mptsas_probe(struct pci_dev *pdev, const struct pci_device_id *id) MPT_SCSI_HOST *hd; MPT_ADAPTER *ioc; unsigned long flags; - int sz, ii; + int ii; int numSGE = 0; int scale; int ioc_cap; - u8 *mem; int error=0; int r; @@ -1133,13 +1605,15 @@ mptsas_probe(struct pci_dev *pdev, const struct pci_device_id *id) printk(MYIOC_s_WARN_FMT "Skipping because it's not operational!\n", ioc->name); - return -ENODEV; + error = -ENODEV; + goto out_mptsas_probe; } if (!ioc->active) { printk(MYIOC_s_WARN_FMT "Skipping because it's disabled!\n", ioc->name); - return -ENODEV; + error = -ENODEV; + goto out_mptsas_probe; } /* Sanity check - ensure at least 1 port is INITIATOR capable @@ -1163,7 +1637,8 @@ mptsas_probe(struct pci_dev *pdev, const struct pci_device_id *id) printk(MYIOC_s_WARN_FMT "Unable to register controller with SCSI subsystem\n", ioc->name); - return -1; + error = -1; + goto out_mptsas_probe; } spin_lock_irqsave(&ioc->FreeQlock, flags); @@ -1192,7 +1667,9 @@ mptsas_probe(struct pci_dev *pdev, const struct pci_device_id *id) sh->unique_id = ioc->id; INIT_LIST_HEAD(&ioc->sas_topology); - init_MUTEX(&ioc->sas_mgmt.mutex); + mutex_init(&ioc->sas_topology_mutex); + + mutex_init(&ioc->sas_mgmt.mutex); init_completion(&ioc->sas_mgmt.done); /* Verify that we won't exceed the maximum @@ -1233,36 +1710,27 @@ mptsas_probe(struct pci_dev *pdev, const struct pci_device_id *id) /* SCSI needs scsi_cmnd lookup table! * (with size equal to req_depth*PtrSz!) */ - sz = ioc->req_depth * sizeof(void *); - mem = kmalloc(sz, GFP_ATOMIC); - if (mem == NULL) { + hd->ScsiLookup = kcalloc(ioc->req_depth, sizeof(void *), GFP_ATOMIC); + if (!hd->ScsiLookup) { error = -ENOMEM; - goto mptsas_probe_failed; + goto out_mptsas_probe; } - memset(mem, 0, sz); - hd->ScsiLookup = (struct scsi_cmnd **) mem; - - dprintk((MYIOC_s_INFO_FMT "ScsiLookup @ %p, sz=%d\n", - ioc->name, hd->ScsiLookup, sz)); + dprintk((MYIOC_s_INFO_FMT "ScsiLookup @ %p\n", + ioc->name, hd->ScsiLookup)); /* Allocate memory for the device structures. * A non-Null pointer at an offset * indicates a device exists. * max_id = 1 + maximum id (hosts.h) */ - sz = sh->max_id * sizeof(void *); - mem = kmalloc(sz, GFP_ATOMIC); - if (mem == NULL) { + hd->Targets = kcalloc(sh->max_id, sizeof(void *), GFP_ATOMIC); + if (!hd->Targets) { error = -ENOMEM; - goto mptsas_probe_failed; + goto out_mptsas_probe; } - memset(mem, 0, sz); - hd->Targets = (VirtDevice **) mem; - - dprintk((KERN_INFO - " Targets @ %p, sz=%d\n", hd->Targets, sz)); + dprintk((KERN_INFO " vtarget @ %p\n", hd->Targets)); /* Clear the TM flags */ @@ -1308,14 +1776,28 @@ mptsas_probe(struct pci_dev *pdev, const struct pci_device_id *id) if (error) { dprintk((KERN_ERR MYNAM "scsi_add_host failed\n")); - goto mptsas_probe_failed; + goto out_mptsas_probe; } mptsas_scan_sas_topology(ioc); + /* + Reporting RAID volumes. + */ + if (!ioc->raid_data.pIocPg2) + return 0; + if (!ioc->raid_data.pIocPg2->NumActiveVolumes) + return 0; + for (ii=0;ii<ioc->raid_data.pIocPg2->NumActiveVolumes;ii++) { + scsi_add_device(sh, + ioc->num_ports, + ioc->raid_data.pIocPg2->RaidVolume[ii].VolumeID, + 0); + } + return 0; -mptsas_probe_failed: +out_mptsas_probe: mptscsih_remove(pdev); return error; @@ -1328,10 +1810,12 @@ static void __devexit mptsas_remove(struct pci_dev *pdev) sas_remove_host(ioc->sh); + mutex_lock(&ioc->sas_topology_mutex); list_for_each_entry_safe(p, n, &ioc->sas_topology, list) { list_del(&p->list); kfree(p); } + mutex_unlock(&ioc->sas_topology_mutex); mptscsih_remove(pdev); } @@ -1382,7 +1866,7 @@ mptsas_init(void) mpt_register(mptscsih_scandv_complete, MPTSAS_DRIVER); mptsasMgmtCtx = mpt_register(mptsas_mgmt_done, MPTSAS_DRIVER); - if (mpt_event_register(mptsasDoneCtx, mptscsih_event_process) == 0) { + if (mpt_event_register(mptsasDoneCtx, mptsas_event_process) == 0) { devtprintk((KERN_INFO MYNAM ": Registered for IOC event notifications\n")); } diff --git a/drivers/message/fusion/mptscsih.c b/drivers/message/fusion/mptscsih.c index b7b9846ff3f..05789e50546 100644 --- a/drivers/message/fusion/mptscsih.c +++ b/drivers/message/fusion/mptscsih.c @@ -144,34 +144,32 @@ static int mptscsih_tm_pending_wait(MPT_SCSI_HOST * hd); static int mptscsih_tm_wait_for_completion(MPT_SCSI_HOST * hd, ulong timeout ); static u32 SCPNT_TO_LOOKUP_IDX(struct scsi_cmnd *sc); -static int mptscsih_TMHandler(MPT_SCSI_HOST *hd, u8 type, u8 channel, u8 target, u8 lun, int ctx2abort, ulong timeout); static int mptscsih_IssueTaskMgmt(MPT_SCSI_HOST *hd, u8 type, u8 channel, u8 target, u8 lun, int ctx2abort, ulong timeout); int mptscsih_ioc_reset(MPT_ADAPTER *ioc, int post_reset); int mptscsih_event_process(MPT_ADAPTER *ioc, EventNotificationReply_t *pEvReply); -static void mptscsih_initTarget(MPT_SCSI_HOST *hd, int bus_id, int target_id, u8 lun, char *data, int dlen); -static void mptscsih_setTargetNegoParms(MPT_SCSI_HOST *hd, VirtDevice *target, char byte56); -static void mptscsih_set_dvflags(MPT_SCSI_HOST *hd, SCSIIORequest_t *pReq); +static void mptscsih_initTarget(MPT_SCSI_HOST *hd, VirtTarget *vtarget, u8 lun, char *data, int dlen); +static void mptscsih_setTargetNegoParms(MPT_SCSI_HOST *hd, VirtTarget *vtarget, char byte56); static void mptscsih_setDevicePage1Flags (u8 width, u8 factor, u8 offset, int *requestedPtr, int *configurationPtr, u8 flags); -static void mptscsih_no_negotiate(MPT_SCSI_HOST *hd, int target_id); +static void mptscsih_no_negotiate(MPT_SCSI_HOST *hd, struct scsi_cmnd *sc); static int mptscsih_writeSDP1(MPT_SCSI_HOST *hd, int portnum, int target, int flags); static int mptscsih_writeIOCPage4(MPT_SCSI_HOST *hd, int target_id, int bus); int mptscsih_scandv_complete(MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf, MPT_FRAME_HDR *r); static int mptscsih_do_cmd(MPT_SCSI_HOST *hd, INTERNAL_CMD *iocmd); -static int mptscsih_synchronize_cache(MPT_SCSI_HOST *hd, int portnum); - -static struct work_struct mptscsih_persistTask; +static void mptscsih_synchronize_cache(MPT_SCSI_HOST *hd, VirtDevice *vdevice); +static void mptscsih_negotiate_to_asyn_narrow(MPT_SCSI_HOST *hd, VirtDevice *vdevice); +static int mptscsih_is_phys_disk(MPT_ADAPTER *ioc, int id); #ifdef MPTSCSIH_ENABLE_DOMAIN_VALIDATION static int mptscsih_do_raid(MPT_SCSI_HOST *hd, u8 action, INTERNAL_CMD *io); static void mptscsih_domainValidation(void *hd); -static int mptscsih_is_phys_disk(MPT_ADAPTER *ioc, int id); static void mptscsih_qas_check(MPT_SCSI_HOST *hd, int id); static int mptscsih_doDv(MPT_SCSI_HOST *hd, int channel, int target); static void mptscsih_dv_parms(MPT_SCSI_HOST *hd, DVPARAMETERS *dv,void *pPage); static void mptscsih_fillbuf(char *buffer, int size, int index, int width); static void mptscsih_set_dvflags_raid(MPT_SCSI_HOST *hd, int id); +static void mptscsih_set_dvflags(MPT_SCSI_HOST *hd, struct scsi_cmnd *sc); #endif void mptscsih_remove(struct pci_dev *); @@ -562,11 +560,24 @@ mptscsih_io_done(MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf, MPT_FRAME_HDR *mr) MPT_SCSI_HOST *hd; SCSIIORequest_t *pScsiReq; SCSIIOReply_t *pScsiReply; - u16 req_idx; + u16 req_idx, req_idx_MR; hd = (MPT_SCSI_HOST *) ioc->sh->hostdata; req_idx = le16_to_cpu(mf->u.frame.hwhdr.msgctxu.fld.req_idx); + req_idx_MR = (mr != NULL) ? + le16_to_cpu(mr->u.frame.hwhdr.msgctxu.fld.req_idx) : req_idx; + if ((req_idx != req_idx_MR) || + (mf->u.frame.linkage.arg1 == 0xdeadbeaf)) { + printk(MYIOC_s_ERR_FMT "Received a mf that was already freed\n", + ioc->name); + printk (MYIOC_s_ERR_FMT + "req_idx=%x req_idx_MR=%x mf=%p mr=%p sc=%p\n", + ioc->name, req_idx, req_idx_MR, mf, mr, + hd->ScsiLookup[req_idx_MR]); + return 0; + } + sc = hd->ScsiLookup[req_idx]; if (sc == NULL) { MPIHeader_t *hdr = (MPIHeader_t *)mf; @@ -627,7 +638,7 @@ mptscsih_io_done(MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf, MPT_FRAME_HDR *mr) dreplyprintk((KERN_NOTICE "Reply ha=%d id=%d lun=%d:\n" "IOCStatus=%04xh SCSIState=%02xh SCSIStatus=%02xh\n" "resid=%d bufflen=%d xfer_cnt=%d\n", - ioc->id, pScsiReq->TargetID, pScsiReq->LUN[1], + ioc->id, sc->device->id, sc->device->lun, status, scsi_state, scsi_status, sc->resid, sc->request_bufflen, xfer_cnt)); @@ -641,7 +652,7 @@ mptscsih_io_done(MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf, MPT_FRAME_HDR *mr) pScsiReply->ResponseInfo) { printk(KERN_NOTICE "ha=%d id=%d lun=%d: " "FCP_ResponseInfo=%08xh\n", - ioc->id, pScsiReq->TargetID, pScsiReq->LUN[1], + ioc->id, sc->device->id, sc->device->lun, le32_to_cpu(pScsiReply->ResponseInfo)); } @@ -677,8 +688,8 @@ mptscsih_io_done(MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf, MPT_FRAME_HDR *mr) sc->result = DID_RESET << 16; /* GEM Workaround. */ - if (ioc->bus_type == SCSI) - mptscsih_no_negotiate(hd, sc->device->id); + if (ioc->bus_type == SPI) + mptscsih_no_negotiate(hd, sc); break; case MPI_IOCSTATUS_SCSI_RESIDUAL_MISMATCH: /* 0x0049 */ @@ -729,6 +740,8 @@ mptscsih_io_done(MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf, MPT_FRAME_HDR *mr) break; + case MPI_IOCSTATUS_SCSI_DATA_OVERRUN: /* 0x0044 */ + sc->resid=0; case MPI_IOCSTATUS_SCSI_RECOVERED_ERROR: /* 0x0040 */ case MPI_IOCSTATUS_SUCCESS: /* 0x0000 */ if (scsi_status == MPI_SCSI_STATUS_BUSY) @@ -788,7 +801,6 @@ mptscsih_io_done(MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf, MPT_FRAME_HDR *mr) case MPI_IOCSTATUS_INSUFFICIENT_RESOURCES: /* 0x0006 */ case MPI_IOCSTATUS_INVALID_FIELD: /* 0x0007 */ case MPI_IOCSTATUS_INVALID_STATE: /* 0x0008 */ - case MPI_IOCSTATUS_SCSI_DATA_OVERRUN: /* 0x0044 */ case MPI_IOCSTATUS_SCSI_IO_DATA_ERROR: /* 0x0046 */ case MPI_IOCSTATUS_SCSI_TASK_MGMT_FAILED: /* 0x004A */ default: @@ -892,16 +904,16 @@ mptscsih_flush_running_cmds(MPT_SCSI_HOST *hd) * when a lun is disable by mid-layer. * Do NOT access the referenced scsi_cmnd structure or * members. Will cause either a paging or NULL ptr error. - * @hd: Pointer to a SCSI HOST structure - * @target: target id - * @lun: lun + * (BUT, BUT, BUT, the code does reference it! - mdr) + * @hd: Pointer to a SCSI HOST structure + * @vdevice: per device private data * * Returns: None. * * Called from slave_destroy. */ static void -mptscsih_search_running_cmds(MPT_SCSI_HOST *hd, uint target, uint lun) +mptscsih_search_running_cmds(MPT_SCSI_HOST *hd, VirtDevice *vdevice) { SCSIIORequest_t *mf = NULL; int ii; @@ -909,7 +921,7 @@ mptscsih_search_running_cmds(MPT_SCSI_HOST *hd, uint target, uint lun) struct scsi_cmnd *sc; dsprintk((KERN_INFO MYNAM ": search_running target %d lun %d max %d\n", - target, lun, max)); + vdevice->target_id, vdevice->lun, max)); for (ii=0; ii < max; ii++) { if ((sc = hd->ScsiLookup[ii]) != NULL) { @@ -919,7 +931,7 @@ mptscsih_search_running_cmds(MPT_SCSI_HOST *hd, uint target, uint lun) dsprintk(( "search_running: found (sc=%p, mf = %p) target %d, lun %d \n", hd->ScsiLookup[ii], mf, mf->TargetID, mf->LUN[1])); - if ((mf->TargetID != ((u8)target)) || (mf->LUN[1] != ((u8) lun))) + if ((mf->TargetID != ((u8)vdevice->target_id)) || (mf->LUN[1] != ((u8) vdevice->lun))) continue; /* Cleanup @@ -993,8 +1005,10 @@ mptscsih_remove(struct pci_dev *pdev) MPT_ADAPTER *ioc = pci_get_drvdata(pdev); struct Scsi_Host *host = ioc->sh; MPT_SCSI_HOST *hd; +#ifdef MPTSCSIH_ENABLE_DOMAIN_VALIDATION int count; unsigned long flags; +#endif int sz1; if(!host) { @@ -1075,11 +1089,6 @@ mptscsih_shutdown(struct pci_dev *pdev) hd = (MPT_SCSI_HOST *)host->hostdata; - /* Flush the cache of this adapter - */ - if(hd != NULL) - mptscsih_synchronize_cache(hd, 0); - } #ifdef CONFIG_PM @@ -1286,7 +1295,7 @@ mptscsih_qcmd(struct scsi_cmnd *SCpnt, void (*done)(struct scsi_cmnd *)) MPT_SCSI_HOST *hd; MPT_FRAME_HDR *mf; SCSIIORequest_t *pScsiReq; - VirtDevice *pTarget = SCpnt->device->hostdata; + VirtDevice *vdev = SCpnt->device->hostdata; int lun; u32 datalen; u32 scsictl; @@ -1341,8 +1350,8 @@ mptscsih_qcmd(struct scsi_cmnd *SCpnt, void (*done)(struct scsi_cmnd *)) /* Default to untagged. Once a target structure has been allocated, * use the Inquiry data to determine if device supports tagged. */ - if (pTarget - && (pTarget->tflags & MPT_TARGET_FLAGS_Q_YES) + if (vdev + && (vdev->vtarget->tflags & MPT_TARGET_FLAGS_Q_YES) && (SCpnt->device->tagged_supported)) { scsictl = scsidir | MPI_SCSIIO_CONTROL_SIMPLEQ; } else { @@ -1351,8 +1360,8 @@ mptscsih_qcmd(struct scsi_cmnd *SCpnt, void (*done)(struct scsi_cmnd *)) /* Use the above information to set up the message frame */ - pScsiReq->TargetID = (u8) pTarget->target_id; - pScsiReq->Bus = pTarget->bus_id; + pScsiReq->TargetID = (u8) vdev->target_id; + pScsiReq->Bus = vdev->bus_id; pScsiReq->ChainOffset = 0; pScsiReq->Function = MPI_FUNCTION_SCSI_IO_REQUEST; pScsiReq->CDBLength = SCpnt->cmd_len; @@ -1403,8 +1412,8 @@ mptscsih_qcmd(struct scsi_cmnd *SCpnt, void (*done)(struct scsi_cmnd *)) SCpnt->host_scribble = NULL; #ifdef MPTSCSIH_ENABLE_DOMAIN_VALIDATION - if (hd->ioc->bus_type == SCSI) { - int dvStatus = hd->ioc->spi_data.dvStatus[pTarget->target_id]; + if (hd->ioc->bus_type == SPI) { + int dvStatus = hd->ioc->spi_data.dvStatus[vdev->target_id]; int issueCmd = 1; if (dvStatus || hd->ioc->spi_data.forceDv) { @@ -1437,7 +1446,7 @@ mptscsih_qcmd(struct scsi_cmnd *SCpnt, void (*done)(struct scsi_cmnd *)) /* Set the DV flags. */ if (dvStatus & MPT_SCSICFG_DV_NOT_DONE) - mptscsih_set_dvflags(hd, pScsiReq); + mptscsih_set_dvflags(hd, SCpnt); if (!issueCmd) goto fail; @@ -1532,7 +1541,7 @@ mptscsih_freeChainBuffers(MPT_ADAPTER *ioc, int req_idx) * * Returns 0 for SUCCESS or -1 if FAILED. */ -static int +int mptscsih_TMHandler(MPT_SCSI_HOST *hd, u8 type, u8 channel, u8 target, u8 lun, int ctx2abort, ulong timeout) { MPT_ADAPTER *ioc; @@ -1723,6 +1732,20 @@ mptscsih_IssueTaskMgmt(MPT_SCSI_HOST *hd, u8 type, u8 channel, u8 target, u8 lun return retval; } +static int +mptscsih_get_tm_timeout(MPT_ADAPTER *ioc) +{ + switch (ioc->bus_type) { + case FC: + return 40; + case SAS: + return 10; + case SPI: + default: + return 2; + } +} + /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ /** * mptscsih_abort - Abort linux scsi_cmnd routine, new_eh variant @@ -1741,6 +1764,7 @@ mptscsih_abort(struct scsi_cmnd * SCpnt) u32 ctx2abort; int scpnt_idx; int retval; + VirtDevice *vdev; /* If we can't locate our host adapter structure, return FAILED status. */ @@ -1790,9 +1814,10 @@ mptscsih_abort(struct scsi_cmnd * SCpnt) hd->abortSCpnt = SCpnt; + vdev = SCpnt->device->hostdata; retval = mptscsih_TMHandler(hd, MPI_SCSITASKMGMT_TASKTYPE_ABORT_TASK, - SCpnt->device->channel, SCpnt->device->id, SCpnt->device->lun, - ctx2abort, 2 /* 2 second timeout */); + vdev->bus_id, vdev->target_id, vdev->lun, + ctx2abort, mptscsih_get_tm_timeout(ioc)); printk (KERN_WARNING MYNAM ": %s: task abort: %s (sc=%p)\n", hd->ioc->name, @@ -1822,6 +1847,7 @@ mptscsih_dev_reset(struct scsi_cmnd * SCpnt) { MPT_SCSI_HOST *hd; int retval; + VirtDevice *vdev; /* If we can't locate our host adapter structure, return FAILED status. */ @@ -1839,9 +1865,10 @@ mptscsih_dev_reset(struct scsi_cmnd * SCpnt) hd->ioc->name, SCpnt); scsi_print_command(SCpnt); + vdev = SCpnt->device->hostdata; retval = mptscsih_TMHandler(hd, MPI_SCSITASKMGMT_TASKTYPE_TARGET_RESET, - SCpnt->device->channel, SCpnt->device->id, - 0, 0, 5 /* 5 second timeout */); + vdev->bus_id, vdev->target_id, + 0, 0, mptscsih_get_tm_timeout(hd->ioc)); printk (KERN_WARNING MYNAM ": %s: target reset: %s (sc=%p)\n", hd->ioc->name, @@ -1871,6 +1898,7 @@ mptscsih_bus_reset(struct scsi_cmnd * SCpnt) { MPT_SCSI_HOST *hd; int retval; + VirtDevice *vdev; /* If we can't locate our host adapter structure, return FAILED status. */ @@ -1888,8 +1916,9 @@ mptscsih_bus_reset(struct scsi_cmnd * SCpnt) if (hd->timeouts < -1) hd->timeouts++; + vdev = SCpnt->device->hostdata; retval = mptscsih_TMHandler(hd, MPI_SCSITASKMGMT_TASKTYPE_RESET_BUS, - SCpnt->device->channel, 0, 0, 0, 5 /* 5 second timeout */); + vdev->bus_id, 0, 0, 0, mptscsih_get_tm_timeout(hd->ioc)); printk (KERN_WARNING MYNAM ": %s: bus reset: %s (sc=%p)\n", hd->ioc->name, @@ -2012,6 +2041,42 @@ mptscsih_tm_wait_for_completion(MPT_SCSI_HOST * hd, ulong timeout ) } /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ +static void +mptscsih_taskmgmt_response_code(MPT_ADAPTER *ioc, u8 response_code) +{ + char *desc; + + switch (response_code) { + case MPI_SCSITASKMGMT_RSP_TM_COMPLETE: + desc = "The task completed."; + break; + case MPI_SCSITASKMGMT_RSP_INVALID_FRAME: + desc = "The IOC received an invalid frame status."; + break; + case MPI_SCSITASKMGMT_RSP_TM_NOT_SUPPORTED: + desc = "The task type is not supported."; + break; + case MPI_SCSITASKMGMT_RSP_TM_FAILED: + desc = "The requested task failed."; + break; + case MPI_SCSITASKMGMT_RSP_TM_SUCCEEDED: + desc = "The task completed successfully."; + break; + case MPI_SCSITASKMGMT_RSP_TM_INVALID_LUN: + desc = "The LUN request is invalid."; + break; + case MPI_SCSITASKMGMT_RSP_IO_QUEUED_ON_IOC: + desc = "The task is in the IOC queue and has not been sent to target."; + break; + default: + desc = "unknown"; + break; + } + printk(MYIOC_s_INFO_FMT "Response Code(0x%08x): F/W: %s\n", + ioc->name, response_code, desc); +} + +/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ /** * mptscsih_taskmgmt_complete - Registered with Fusion MPT base driver * @ioc: Pointer to MPT_ADAPTER structure @@ -2060,6 +2125,11 @@ mptscsih_taskmgmt_complete(MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf, MPT_FRAME_HDR *m /* Figure out if this was ABORT_TASK, TARGET_RESET, or BUS_RESET! */ tmType = pScsiTmReq->TaskType; + if (ioc->facts.MsgVersion >= MPI_VERSION_01_05 && + pScsiTmReply->ResponseCode) + mptscsih_taskmgmt_response_code(ioc, + pScsiTmReply->ResponseCode); + dtmprintk((MYIOC_s_WARN_FMT " TaskType = %d, TerminationCount=%d\n", ioc->name, tmType, le32_to_cpu(pScsiTmReply->TerminationCount))); DBG_DUMP_TM_REPLY_FRAME((u32 *)pScsiTmReply); @@ -2151,51 +2221,70 @@ mptscsih_bios_param(struct scsi_device * sdev, struct block_device *bdev, /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ /* * OS entry point to allow host driver to alloc memory + * for each scsi target. Called once per device the bus scan. + * Return non-zero if allocation fails. + */ +int +mptscsih_target_alloc(struct scsi_target *starget) +{ + VirtTarget *vtarget; + + vtarget = kzalloc(sizeof(VirtTarget), GFP_KERNEL); + if (!vtarget) + return -ENOMEM; + starget->hostdata = vtarget; + return 0; +} + +/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ +/* + * OS entry point to allow host driver to alloc memory * for each scsi device. Called once per device the bus scan. * Return non-zero if allocation fails. - * Init memory once per id (not LUN). */ int -mptscsih_slave_alloc(struct scsi_device *device) +mptscsih_slave_alloc(struct scsi_device *sdev) { - struct Scsi_Host *host = device->host; + struct Scsi_Host *host = sdev->host; MPT_SCSI_HOST *hd = (MPT_SCSI_HOST *)host->hostdata; + VirtTarget *vtarget; VirtDevice *vdev; - uint target = device->id; - - if (hd == NULL) - return -ENODEV; + struct scsi_target *starget; - if ((vdev = hd->Targets[target]) != NULL) - goto out; - - vdev = kmalloc(sizeof(VirtDevice), GFP_KERNEL); + vdev = kzalloc(sizeof(VirtDevice), GFP_KERNEL); if (!vdev) { printk(MYIOC_s_ERR_FMT "slave_alloc kmalloc(%zd) FAILED!\n", hd->ioc->name, sizeof(VirtDevice)); return -ENOMEM; } - memset(vdev, 0, sizeof(VirtDevice)); - vdev->tflags = MPT_TARGET_FLAGS_Q_YES; vdev->ioc_id = hd->ioc->id; - vdev->target_id = device->id; - vdev->bus_id = device->channel; - vdev->raidVolume = 0; - hd->Targets[device->id] = vdev; - if (hd->ioc->bus_type == SCSI) { - if (hd->ioc->raid_data.isRaid & (1 << device->id)) { - vdev->raidVolume = 1; - ddvtprintk((KERN_INFO - "RAID Volume @ id %d\n", device->id)); + vdev->target_id = sdev->id; + vdev->bus_id = sdev->channel; + vdev->lun = sdev->lun; + sdev->hostdata = vdev; + + starget = scsi_target(sdev); + vtarget = starget->hostdata; + vdev->vtarget = vtarget; + + if (vtarget->num_luns == 0) { + hd->Targets[sdev->id] = vtarget; + vtarget->ioc_id = hd->ioc->id; + vtarget->tflags = MPT_TARGET_FLAGS_Q_YES; + vtarget->target_id = sdev->id; + vtarget->bus_id = sdev->channel; + if (hd->ioc->bus_type == SPI) { + if (hd->ioc->raid_data.isRaid & (1 << sdev->id)) { + vtarget->raidVolume = 1; + ddvtprintk((KERN_INFO + "RAID Volume @ id %d\n", sdev->id)); + } + } else { + vtarget->tflags |= MPT_TARGET_FLAGS_VALID_INQUIRY; } - } else { - vdev->tflags |= MPT_TARGET_FLAGS_VALID_INQUIRY; } - - out: - vdev->num_luns++; - device->hostdata = vdev; + vtarget->num_luns++; return 0; } @@ -2204,40 +2293,52 @@ mptscsih_slave_alloc(struct scsi_device *device) * Called if no device present or device being unloaded */ void -mptscsih_slave_destroy(struct scsi_device *device) +mptscsih_target_destroy(struct scsi_target *starget) { - struct Scsi_Host *host = device->host; - MPT_SCSI_HOST *hd = (MPT_SCSI_HOST *)host->hostdata; - VirtDevice *vdev; - uint target = device->id; - uint lun = device->lun; - - if (hd == NULL) - return; - - mptscsih_search_running_cmds(hd, target, lun); - - vdev = hd->Targets[target]; - vdev->luns[0] &= ~(1 << lun); - if (--vdev->num_luns) - return; - - kfree(hd->Targets[target]); - hd->Targets[target] = NULL; - - if (hd->ioc->bus_type == SCSI) { - if (mptscsih_is_phys_disk(hd->ioc, target)) { - hd->ioc->spi_data.forceDv |= MPT_SCSICFG_RELOAD_IOC_PG3; - } else { - hd->ioc->spi_data.dvStatus[target] = - MPT_SCSICFG_NEGOTIATE; + if (starget->hostdata) + kfree(starget->hostdata); + starget->hostdata = NULL; +} - if (!hd->negoNvram) { - hd->ioc->spi_data.dvStatus[target] |= - MPT_SCSICFG_DV_NOT_DONE; +/* + * OS entry point to allow for host driver to free allocated memory + * Called if no device present or device being unloaded + */ +void +mptscsih_slave_destroy(struct scsi_device *sdev) +{ + struct Scsi_Host *host = sdev->host; + MPT_SCSI_HOST *hd = (MPT_SCSI_HOST *)host->hostdata; + VirtTarget *vtarget; + VirtDevice *vdevice; + struct scsi_target *starget; + + starget = scsi_target(sdev); + vtarget = starget->hostdata; + vdevice = sdev->hostdata; + + mptscsih_search_running_cmds(hd, vdevice); + vtarget->luns[0] &= ~(1 << vdevice->lun); + vtarget->num_luns--; + if (vtarget->num_luns == 0) { + mptscsih_negotiate_to_asyn_narrow(hd, vdevice); + if (hd->ioc->bus_type == SPI) { + if (mptscsih_is_phys_disk(hd->ioc, vtarget->target_id)) { + hd->ioc->spi_data.forceDv |= MPT_SCSICFG_RELOAD_IOC_PG3; + } else { + hd->ioc->spi_data.dvStatus[vtarget->target_id] = + MPT_SCSICFG_NEGOTIATE; + if (!hd->negoNvram) { + hd->ioc->spi_data.dvStatus[vtarget->target_id] |= + MPT_SCSICFG_DV_NOT_DONE; + } } } + hd->Targets[sdev->id] = NULL; } + mptscsih_synchronize_cache(hd, vdevice); + kfree(vdevice); + sdev->hostdata = NULL; } /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ @@ -2251,22 +2352,21 @@ mptscsih_slave_destroy(struct scsi_device *device) int mptscsih_change_queue_depth(struct scsi_device *sdev, int qdepth) { - MPT_SCSI_HOST *hd = (MPT_SCSI_HOST *)sdev->host->hostdata; - VirtDevice *pTarget; - int max_depth; - int tagged; - - if (hd == NULL) - return 0; - if (!(pTarget = hd->Targets[sdev->id])) - return 0; - - if (hd->ioc->bus_type == SCSI) { - if (pTarget->tflags & MPT_TARGET_FLAGS_VALID_INQUIRY) { - if (!(pTarget->tflags & MPT_TARGET_FLAGS_Q_YES)) + MPT_SCSI_HOST *hd = (MPT_SCSI_HOST *)sdev->host->hostdata; + VirtTarget *vtarget; + struct scsi_target *starget; + int max_depth; + int tagged; + + starget = scsi_target(sdev); + vtarget = starget->hostdata; + + if (hd->ioc->bus_type == SPI) { + if (vtarget->tflags & MPT_TARGET_FLAGS_VALID_INQUIRY) { + if (!(vtarget->tflags & MPT_TARGET_FLAGS_Q_YES)) max_depth = 1; - else if (((pTarget->inq_data[0] & 0x1f) == 0x00) && - (pTarget->minSyncFactor <= MPT_ULTRA160 )) + else if (((vtarget->inq_data[0] & 0x1f) == 0x00) && + (vtarget->minSyncFactor <= MPT_ULTRA160 )) max_depth = MPT_SCSI_CMD_PER_DEV_HIGH; else max_depth = MPT_SCSI_CMD_PER_DEV_LOW; @@ -2295,64 +2395,58 @@ mptscsih_change_queue_depth(struct scsi_device *sdev, int qdepth) * Return non-zero if fails. */ int -mptscsih_slave_configure(struct scsi_device *device) +mptscsih_slave_configure(struct scsi_device *sdev) { - struct Scsi_Host *sh = device->host; - VirtDevice *pTarget; + struct Scsi_Host *sh = sdev->host; + VirtTarget *vtarget; + VirtDevice *vdevice; + struct scsi_target *starget; MPT_SCSI_HOST *hd = (MPT_SCSI_HOST *)sh->hostdata; + int indexed_lun, lun_index; - if ((hd == NULL) || (hd->Targets == NULL)) { - return 0; - } + starget = scsi_target(sdev); + vtarget = starget->hostdata; + vdevice = sdev->hostdata; dsprintk((MYIOC_s_INFO_FMT "device @ %p, id=%d, LUN=%d, channel=%d\n", - hd->ioc->name, device, device->id, device->lun, device->channel)); - dsprintk((MYIOC_s_INFO_FMT - "sdtr %d wdtr %d ppr %d inq length=%d\n", - hd->ioc->name, device->sdtr, device->wdtr, - device->ppr, device->inquiry_len)); - - if (device->id > sh->max_id) { + hd->ioc->name, sdev, sdev->id, sdev->lun, sdev->channel)); + if (hd->ioc->bus_type == SPI) + dsprintk((MYIOC_s_INFO_FMT + "sdtr %d wdtr %d ppr %d inq length=%d\n", + hd->ioc->name, sdev->sdtr, sdev->wdtr, + sdev->ppr, sdev->inquiry_len)); + + if (sdev->id > sh->max_id) { /* error case, should never happen */ - scsi_adjust_queue_depth(device, 0, 1); - goto slave_configure_exit; - } - - pTarget = hd->Targets[device->id]; - - if (pTarget == NULL) { - /* Driver doesn't know about this device. - * Kernel may generate a "Dummy Lun 0" which - * may become a real Lun if a - * "scsi add-single-device" command is executed - * while the driver is active (hot-plug a - * device). LSI Raid controllers need - * queue_depth set to DEV_HIGH for this reason. - */ - scsi_adjust_queue_depth(device, MSG_SIMPLE_TAG, - MPT_SCSI_CMD_PER_DEV_HIGH); + scsi_adjust_queue_depth(sdev, 0, 1); goto slave_configure_exit; } - mptscsih_initTarget(hd, device->channel, device->id, device->lun, - device->inquiry, device->inquiry_len ); - mptscsih_change_queue_depth(device, MPT_SCSI_CMD_PER_DEV_HIGH); + vdevice->configured_lun=1; + lun_index = (vdevice->lun >> 5); /* 32 luns per lun_index */ + indexed_lun = (vdevice->lun % 32); + vtarget->luns[lun_index] |= (1 << indexed_lun); + mptscsih_initTarget(hd, vtarget, sdev->lun, sdev->inquiry, + sdev->inquiry_len ); + mptscsih_change_queue_depth(sdev, MPT_SCSI_CMD_PER_DEV_HIGH); dsprintk((MYIOC_s_INFO_FMT "Queue depth=%d, tflags=%x\n", - hd->ioc->name, device->queue_depth, pTarget->tflags)); + hd->ioc->name, sdev->queue_depth, vtarget->tflags)); - dsprintk((MYIOC_s_INFO_FMT - "negoFlags=%x, maxOffset=%x, SyncFactor=%x\n", - hd->ioc->name, pTarget->negoFlags, pTarget->maxOffset, pTarget->minSyncFactor)); + if (hd->ioc->bus_type == SPI) + dsprintk((MYIOC_s_INFO_FMT + "negoFlags=%x, maxOffset=%x, SyncFactor=%x\n", + hd->ioc->name, vtarget->negoFlags, vtarget->maxOffset, + vtarget->minSyncFactor)); slave_configure_exit: dsprintk((MYIOC_s_INFO_FMT "tagged %d, simple %d, ordered %d\n", - hd->ioc->name,device->tagged_supported, device->simple_tags, - device->ordered_tags)); + hd->ioc->name,sdev->tagged_supported, sdev->simple_tags, + sdev->ordered_tags)); return 0; } @@ -2370,16 +2464,14 @@ slave_configure_exit: static void mptscsih_copy_sense_data(struct scsi_cmnd *sc, MPT_SCSI_HOST *hd, MPT_FRAME_HDR *mf, SCSIIOReply_t *pScsiReply) { - VirtDevice *target; + VirtDevice *vdev; SCSIIORequest_t *pReq; u32 sense_count = le32_to_cpu(pScsiReply->SenseCount); - int index; /* Get target structure */ pReq = (SCSIIORequest_t *) mf; - index = (int) pReq->TargetID; - target = hd->Targets[index]; + vdev = sc->device->hostdata; if (sense_count) { u8 *sense_data; @@ -2393,7 +2485,7 @@ mptscsih_copy_sense_data(struct scsi_cmnd *sc, MPT_SCSI_HOST *hd, MPT_FRAME_HDR /* Log SMART data (asc = 0x5D, non-IM case only) if required. */ if ((hd->ioc->events) && (hd->ioc->eventTypes & (1 << MPI_EVENT_SCSI_DEVICE_STATUS_CHANGE))) { - if ((sense_data[12] == 0x5D) && (target->raidVolume == 0)) { + if ((sense_data[12] == 0x5D) && (vdev->vtarget->raidVolume == 0)) { int idx; MPT_ADAPTER *ioc = hd->ioc; @@ -2403,7 +2495,7 @@ mptscsih_copy_sense_data(struct scsi_cmnd *sc, MPT_SCSI_HOST *hd, MPT_FRAME_HDR ioc->events[idx].data[0] = (pReq->LUN[1] << 24) || (MPI_EVENT_SCSI_DEV_STAT_RC_SMART_DATA << 16) || - (pReq->Bus << 8) || pReq->TargetID; + (sc->device->channel << 8) || sc->device->id; ioc->events[idx].data[1] = (sense_data[13] << 8) || sense_data[12]; @@ -2503,9 +2595,9 @@ mptscsih_ioc_reset(MPT_ADAPTER *ioc, int reset_phase) /* 2. Chain Buffer initialization */ - /* 4. Renegotiate to all devices, if SCSI + /* 4. Renegotiate to all devices, if SPI */ - if (ioc->bus_type == SCSI) { + if (ioc->bus_type == SPI) { dnegoprintk(("writeSDP1: ALL_IDS USE_NVRAM\n")); mptscsih_writeSDP1(hd, 0, 0, MPT_SCSICFG_ALL_IDS | MPT_SCSICFG_USE_NVRAM); } @@ -2532,13 +2624,25 @@ mptscsih_ioc_reset(MPT_ADAPTER *ioc, int reset_phase) hd->cmdPtr = NULL; } - /* 7. Set flag to force DV and re-read IOC Page 3 + /* 7. SPI: Set flag to force DV and re-read IOC Page 3 */ - if (ioc->bus_type == SCSI) { + if (ioc->bus_type == SPI) { ioc->spi_data.forceDv = MPT_SCSICFG_NEED_DV | MPT_SCSICFG_RELOAD_IOC_PG3; ddvtprintk(("Set reload IOC Pg3 Flag\n")); } + /* 7. FC: Rescan for blocked rports which might have returned. + */ + else if (ioc->bus_type == FC) { + int work_count; + unsigned long flags; + + spin_lock_irqsave(&ioc->fc_rescan_work_lock, flags); + work_count = ++ioc->fc_rescan_work_count; + spin_unlock_irqrestore(&ioc->fc_rescan_work_lock, flags); + if (work_count == 1) + schedule_work(&ioc->fc_rescan_work); + } dtmprintk((MYIOC_s_WARN_FMT "Post-Reset complete.\n", ioc->name)); } @@ -2547,21 +2651,13 @@ mptscsih_ioc_reset(MPT_ADAPTER *ioc, int reset_phase) } /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ -/* work queue thread to clear the persitency table */ -static void -mptscsih_sas_persist_clear_table(void * arg) -{ - MPT_ADAPTER *ioc = (MPT_ADAPTER *)arg; - - mptbase_sas_persist_operation(ioc, MPI_SAS_OP_CLEAR_NOT_PRESENT); -} - -/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ int mptscsih_event_process(MPT_ADAPTER *ioc, EventNotificationReply_t *pEvReply) { MPT_SCSI_HOST *hd; u8 event = le32_to_cpu(pEvReply->Event) & 0xFF; + int work_count; + unsigned long flags; devtprintk((MYIOC_s_INFO_FMT "MPT event (=%02Xh) routed to SCSI host driver!\n", ioc->name, event)); @@ -2576,18 +2672,25 @@ mptscsih_event_process(MPT_ADAPTER *ioc, EventNotificationReply_t *pEvReply) break; case MPI_EVENT_IOC_BUS_RESET: /* 04 */ case MPI_EVENT_EXT_BUS_RESET: /* 05 */ - if (hd && (ioc->bus_type == SCSI) && (hd->soft_resets < -1)) + if (hd && (ioc->bus_type == SPI) && (hd->soft_resets < -1)) hd->soft_resets++; break; case MPI_EVENT_LOGOUT: /* 09 */ /* FIXME! */ break; + case MPI_EVENT_RESCAN: /* 06 */ + spin_lock_irqsave(&ioc->fc_rescan_work_lock, flags); + work_count = ++ioc->fc_rescan_work_count; + spin_unlock_irqrestore(&ioc->fc_rescan_work_lock, flags); + if (work_count == 1) + schedule_work(&ioc->fc_rescan_work); + break; + /* * CHECKME! Don't think we need to do * anything for these, but... */ - case MPI_EVENT_RESCAN: /* 06 */ case MPI_EVENT_LINK_STATUS_CHANGE: /* 07 */ case MPI_EVENT_LOOP_STATE_CHANGE: /* 08 */ /* @@ -2597,11 +2700,11 @@ mptscsih_event_process(MPT_ADAPTER *ioc, EventNotificationReply_t *pEvReply) case MPI_EVENT_INTEGRATED_RAID: /* 0B */ { +#ifdef MPTSCSIH_ENABLE_DOMAIN_VALIDATION pMpiEventDataRaid_t pRaidEventData = (pMpiEventDataRaid_t) pEvReply->Data; -#ifdef MPTSCSIH_ENABLE_DOMAIN_VALIDATION /* Domain Validation Needed */ - if (ioc->bus_type == SCSI && + if (ioc->bus_type == SPI && pRaidEventData->ReasonCode == MPI_EVENT_RAID_RC_DOMAIN_VAL_NEEDED) mptscsih_set_dvflags_raid(hd, pRaidEventData->PhysDiskNum); @@ -2609,13 +2712,6 @@ mptscsih_event_process(MPT_ADAPTER *ioc, EventNotificationReply_t *pEvReply) break; } - /* Persistent table is full. */ - case MPI_EVENT_PERSISTENT_TABLE_FULL: - INIT_WORK(&mptscsih_persistTask, - mptscsih_sas_persist_clear_table,(void *)ioc); - schedule_work(&mptscsih_persistTask); - break; - case MPI_EVENT_NONE: /* 00 */ case MPI_EVENT_LOG_DATA: /* 01 */ case MPI_EVENT_STATE_CHANGE: /* 02 */ @@ -2632,8 +2728,7 @@ mptscsih_event_process(MPT_ADAPTER *ioc, EventNotificationReply_t *pEvReply) /* * mptscsih_initTarget - Target, LUN alloc/free functionality. * @hd: Pointer to MPT_SCSI_HOST structure - * @bus_id: Bus number (?) - * @target_id: SCSI target id + * @vtarget: per target private data * @lun: SCSI LUN id * @data: Pointer to data * @dlen: Number of INQUIRY bytes @@ -2646,15 +2741,14 @@ mptscsih_event_process(MPT_ADAPTER *ioc, EventNotificationReply_t *pEvReply) * */ static void -mptscsih_initTarget(MPT_SCSI_HOST *hd, int bus_id, int target_id, u8 lun, char *data, int dlen) +mptscsih_initTarget(MPT_SCSI_HOST *hd, VirtTarget *vtarget, u8 lun, char *data, int dlen) { - int indexed_lun, lun_index; - VirtDevice *vdev; SpiCfgData *pSpi; char data_56; + int inq_len; dinitprintk((MYIOC_s_INFO_FMT "initTarget bus=%d id=%d lun=%d hd=%p\n", - hd->ioc->name, bus_id, target_id, lun, hd)); + hd->ioc->name, vtarget->bus_id, vtarget->target_id, lun, hd)); /* * If the peripheral qualifier filter is enabled then if the target reports a 0x1 @@ -2674,75 +2768,68 @@ mptscsih_initTarget(MPT_SCSI_HOST *hd, int bus_id, int target_id, u8 lun, char * if (data[0] & 0xe0) return; - if ((vdev = hd->Targets[target_id]) == NULL) { + if (vtarget == NULL) return; - } - lun_index = (lun >> 5); /* 32 luns per lun_index */ - indexed_lun = (lun % 32); - vdev->luns[lun_index] |= (1 << indexed_lun); - - if (hd->ioc->bus_type == SCSI) { - if ((data[0] == TYPE_PROCESSOR) && (hd->ioc->spi_data.Saf_Te)) { - /* Treat all Processors as SAF-TE if - * command line option is set */ - vdev->tflags |= MPT_TARGET_FLAGS_SAF_TE_ISSUED; - mptscsih_writeIOCPage4(hd, target_id, bus_id); - }else if ((data[0] == TYPE_PROCESSOR) && - !(vdev->tflags & MPT_TARGET_FLAGS_SAF_TE_ISSUED )) { - if ( dlen > 49 ) { - vdev->tflags |= MPT_TARGET_FLAGS_VALID_INQUIRY; - if ( data[44] == 'S' && - data[45] == 'A' && - data[46] == 'F' && - data[47] == '-' && - data[48] == 'T' && - data[49] == 'E' ) { - vdev->tflags |= MPT_TARGET_FLAGS_SAF_TE_ISSUED; - mptscsih_writeIOCPage4(hd, target_id, bus_id); - } + if (data) + vtarget->type = data[0]; + + if (hd->ioc->bus_type != SPI) + return; + + if ((data[0] == TYPE_PROCESSOR) && (hd->ioc->spi_data.Saf_Te)) { + /* Treat all Processors as SAF-TE if + * command line option is set */ + vtarget->tflags |= MPT_TARGET_FLAGS_SAF_TE_ISSUED; + mptscsih_writeIOCPage4(hd, vtarget->target_id, vtarget->bus_id); + }else if ((data[0] == TYPE_PROCESSOR) && + !(vtarget->tflags & MPT_TARGET_FLAGS_SAF_TE_ISSUED )) { + if ( dlen > 49 ) { + vtarget->tflags |= MPT_TARGET_FLAGS_VALID_INQUIRY; + if ( data[44] == 'S' && + data[45] == 'A' && + data[46] == 'F' && + data[47] == '-' && + data[48] == 'T' && + data[49] == 'E' ) { + vtarget->tflags |= MPT_TARGET_FLAGS_SAF_TE_ISSUED; + mptscsih_writeIOCPage4(hd, vtarget->target_id, vtarget->bus_id); } } - if (!(vdev->tflags & MPT_TARGET_FLAGS_VALID_INQUIRY)) { - if ( dlen > 8 ) { - memcpy (vdev->inq_data, data, 8); - } else { - memcpy (vdev->inq_data, data, dlen); - } + } + if (!(vtarget->tflags & MPT_TARGET_FLAGS_VALID_INQUIRY)) { + inq_len = dlen < 8 ? dlen : 8; + memcpy (vtarget->inq_data, data, inq_len); + /* If have not done DV, set the DV flag. + */ + pSpi = &hd->ioc->spi_data; + if ((data[0] == TYPE_TAPE) || (data[0] == TYPE_PROCESSOR)) { + if (pSpi->dvStatus[vtarget->target_id] & MPT_SCSICFG_DV_NOT_DONE) + pSpi->dvStatus[vtarget->target_id] |= MPT_SCSICFG_NEED_DV; + } + vtarget->tflags |= MPT_TARGET_FLAGS_VALID_INQUIRY; - /* If have not done DV, set the DV flag. + data_56 = 0x0F; /* Default to full capabilities if Inq data length is < 57 */ + if (dlen > 56) { + if ( (!(vtarget->tflags & MPT_TARGET_FLAGS_VALID_56))) { + /* Update the target capabilities */ - pSpi = &hd->ioc->spi_data; - if ((data[0] == TYPE_TAPE) || (data[0] == TYPE_PROCESSOR)) { - if (pSpi->dvStatus[target_id] & MPT_SCSICFG_DV_NOT_DONE) - pSpi->dvStatus[target_id] |= MPT_SCSICFG_NEED_DV; + data_56 = data[56]; + vtarget->tflags |= MPT_TARGET_FLAGS_VALID_56; } - - vdev->tflags |= MPT_TARGET_FLAGS_VALID_INQUIRY; - - - data_56 = 0x0F; /* Default to full capabilities if Inq data length is < 57 */ - if (dlen > 56) { - if ( (!(vdev->tflags & MPT_TARGET_FLAGS_VALID_56))) { - /* Update the target capabilities - */ - data_56 = data[56]; - vdev->tflags |= MPT_TARGET_FLAGS_VALID_56; - } - } - mptscsih_setTargetNegoParms(hd, vdev, data_56); - } else { - /* Initial Inquiry may not request enough data bytes to - * obtain byte 57. DV will; if target doesn't return - * at least 57 bytes, data[56] will be zero. */ - if (dlen > 56) { - if ( (!(vdev->tflags & MPT_TARGET_FLAGS_VALID_56))) { - /* Update the target capabilities - */ - data_56 = data[56]; - vdev->tflags |= MPT_TARGET_FLAGS_VALID_56; - mptscsih_setTargetNegoParms(hd, vdev, data_56); - } + } + mptscsih_setTargetNegoParms(hd, vtarget, data_56); + } else { + /* Initial Inquiry may not request enough data bytes to + * obtain byte 57. DV will; if target doesn't return + * at least 57 bytes, data[56] will be zero. */ + if (dlen > 56) { + if ( (!(vtarget->tflags & MPT_TARGET_FLAGS_VALID_56))) { + /* Update the target capabilities + */ + data_56 = data[56]; + vtarget->tflags |= MPT_TARGET_FLAGS_VALID_56; + mptscsih_setTargetNegoParms(hd, vtarget, data_56); } } } @@ -2755,12 +2842,12 @@ mptscsih_initTarget(MPT_SCSI_HOST *hd, int bus_id, int target_id, u8 lun, char * * */ static void -mptscsih_setTargetNegoParms(MPT_SCSI_HOST *hd, VirtDevice *target, char byte56) +mptscsih_setTargetNegoParms(MPT_SCSI_HOST *hd, VirtTarget *target, char byte56) { SpiCfgData *pspi_data = &hd->ioc->spi_data; int id = (int) target->target_id; int nvram; - VirtDevice *vdev; + VirtTarget *vtarget; int ii; u8 width = MPT_NARROW; u8 factor = MPT_ASYNC; @@ -2905,9 +2992,9 @@ mptscsih_setTargetNegoParms(MPT_SCSI_HOST *hd, VirtDevice *target, char byte56) ddvtprintk((KERN_INFO "Disabling QAS due to noQas=%02x on id=%d!\n", noQas, id)); for (ii = 0; ii < id; ii++) { - if ( (vdev = hd->Targets[ii]) ) { - vdev->negoFlags |= MPT_TARGET_NO_NEGO_QAS; - mptscsih_writeSDP1(hd, 0, ii, vdev->negoFlags); + if ( (vtarget = hd->Targets[ii]) ) { + vtarget->negoFlags |= MPT_TARGET_NO_NEGO_QAS; + mptscsih_writeSDP1(hd, 0, ii, vtarget->negoFlags); } } } @@ -2926,105 +3013,17 @@ mptscsih_setTargetNegoParms(MPT_SCSI_HOST *hd, VirtDevice *target, char byte56) } /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ -/* If DV disabled (negoNvram set to USE_NVARM) or if not LUN 0, return. - * Else set the NEED_DV flag after Read Capacity Issued (disks) - * or Mode Sense (cdroms). - * - * Tapes, initTarget will set this flag on completion of Inquiry command. - * Called only if DV_NOT_DONE flag is set - */ -static void -mptscsih_set_dvflags(MPT_SCSI_HOST *hd, SCSIIORequest_t *pReq) -{ - MPT_ADAPTER *ioc = hd->ioc; - u8 cmd; - SpiCfgData *pSpi; - - ddvtprintk((MYIOC_s_NOTE_FMT - " set_dvflags: id=%d lun=%d negoNvram=%x cmd=%x\n", - hd->ioc->name, pReq->TargetID, pReq->LUN[1], hd->negoNvram, pReq->CDB[0])); - - if ((pReq->LUN[1] != 0) || (hd->negoNvram != 0)) - return; - - cmd = pReq->CDB[0]; - - if ((cmd == READ_CAPACITY) || (cmd == MODE_SENSE)) { - pSpi = &ioc->spi_data; - if ((ioc->raid_data.isRaid & (1 << pReq->TargetID)) && ioc->raid_data.pIocPg3) { - /* Set NEED_DV for all hidden disks - */ - Ioc3PhysDisk_t *pPDisk = ioc->raid_data.pIocPg3->PhysDisk; - int numPDisk = ioc->raid_data.pIocPg3->NumPhysDisks; - - while (numPDisk) { - pSpi->dvStatus[pPDisk->PhysDiskID] |= MPT_SCSICFG_NEED_DV; - ddvtprintk(("NEED_DV set for phys disk id %d\n", pPDisk->PhysDiskID)); - pPDisk++; - numPDisk--; - } - } - pSpi->dvStatus[pReq->TargetID] |= MPT_SCSICFG_NEED_DV; - ddvtprintk(("NEED_DV set for visible disk id %d\n", pReq->TargetID)); - } -} - -/* mptscsih_raid_set_dv_flags() - * - * New or replaced disk. Set DV flag and schedule DV. - */ -static void -mptscsih_set_dvflags_raid(MPT_SCSI_HOST *hd, int id) -{ - MPT_ADAPTER *ioc = hd->ioc; - SpiCfgData *pSpi = &ioc->spi_data; - Ioc3PhysDisk_t *pPDisk; - int numPDisk; - - if (hd->negoNvram != 0) - return; - - ddvtprintk(("DV requested for phys disk id %d\n", id)); - if (ioc->raid_data.pIocPg3) { - pPDisk = ioc->raid_data.pIocPg3->PhysDisk; - numPDisk = ioc->raid_data.pIocPg3->NumPhysDisks; - while (numPDisk) { - if (id == pPDisk->PhysDiskNum) { - pSpi->dvStatus[pPDisk->PhysDiskID] = - (MPT_SCSICFG_NEED_DV | MPT_SCSICFG_DV_NOT_DONE); - pSpi->forceDv = MPT_SCSICFG_NEED_DV; - ddvtprintk(("NEED_DV set for phys disk id %d\n", - pPDisk->PhysDiskID)); - break; - } - pPDisk++; - numPDisk--; - } - - if (numPDisk == 0) { - /* The physical disk that needs DV was not found - * in the stored IOC Page 3. The driver must reload - * this page. DV routine will set the NEED_DV flag for - * all phys disks that have DV_NOT_DONE set. - */ - pSpi->forceDv = MPT_SCSICFG_NEED_DV | MPT_SCSICFG_RELOAD_IOC_PG3; - ddvtprintk(("phys disk %d not found. Setting reload IOC Pg3 Flag\n",id)); - } - } -} - -/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ /* * If no Target, bus reset on 1st I/O. Set the flag to * prevent any future negotiations to this device. */ static void -mptscsih_no_negotiate(MPT_SCSI_HOST *hd, int target_id) +mptscsih_no_negotiate(MPT_SCSI_HOST *hd, struct scsi_cmnd *sc) { + VirtDevice *vdev; - if ((hd->Targets) && (hd->Targets[target_id] == NULL)) - hd->ioc->spi_data.dvStatus[target_id] |= MPT_SCSICFG_BLK_NEGO; - + if ((vdev = sc->device->hostdata) != NULL) + hd->ioc->spi_data.dvStatus[vdev->target_id] |= MPT_SCSICFG_BLK_NEGO; return; } @@ -3100,7 +3099,7 @@ mptscsih_writeSDP1(MPT_SCSI_HOST *hd, int portnum, int target_id, int flags) MPT_ADAPTER *ioc = hd->ioc; Config_t *pReq; SCSIDevicePage1_t *pData; - VirtDevice *pTarget=NULL; + VirtTarget *vtarget=NULL; MPT_FRAME_HDR *mf; dma_addr_t dataDma; u16 req_idx; @@ -3180,11 +3179,11 @@ mptscsih_writeSDP1(MPT_SCSI_HOST *hd, int portnum, int target_id, int flags) /* If id is not a raid volume, get the updated * transmission settings from the target structure. */ - if (hd->Targets && (pTarget = hd->Targets[id]) && !pTarget->raidVolume) { - width = pTarget->maxWidth; - factor = pTarget->minSyncFactor; - offset = pTarget->maxOffset; - negoFlags = pTarget->negoFlags; + if (hd->Targets && (vtarget = hd->Targets[id]) && !vtarget->raidVolume) { + width = vtarget->maxWidth; + factor = vtarget->minSyncFactor; + offset = vtarget->maxOffset; + negoFlags = vtarget->negoFlags; } #ifdef MPTSCSIH_ENABLE_DOMAIN_VALIDATION @@ -3904,149 +3903,139 @@ mptscsih_do_cmd(MPT_SCSI_HOST *hd, INTERNAL_CMD *io) /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ /** - * mptscsih_synchronize_cache - Send SYNCHRONIZE_CACHE to all disks. - * @hd: Pointer to MPT_SCSI_HOST structure - * @portnum: IOC port number + * mptscsih_negotiate_to_asyn_narrow - Restore devices to default state + * @hd: Pointer to a SCSI HOST structure + * @vtarget: per device private data * * Uses the ISR, but with special processing. * MUST be single-threaded. * - * Return: 0 on completion */ -static int -mptscsih_synchronize_cache(MPT_SCSI_HOST *hd, int portnum) +static void +mptscsih_negotiate_to_asyn_narrow(MPT_SCSI_HOST *hd, VirtDevice *vdevice) { + VirtTarget *vtarget = vdevice->vtarget; MPT_ADAPTER *ioc= hd->ioc; - VirtDevice *pTarget; - SCSIDevicePage1_t *pcfg1Data = NULL; - INTERNAL_CMD iocmd; + SCSIDevicePage1_t *pcfg1Data; CONFIGPARMS cfg; - dma_addr_t cfg1_dma_addr = -1; - ConfigPageHeader_t header1; - int bus = 0; - int id = 0; - int lun; - int indexed_lun, lun_index; - int hostId = ioc->pfacts[portnum].PortSCSIID; - int max_id; - int requested, configuration, data; - int doConfig = 0; + dma_addr_t cfg1_dma_addr; + ConfigPageHeader_t header; + int id; + int requested, configuration, data,i; u8 flags, factor; - max_id = ioc->sh->max_id - 1; - - /* Following parameters will not change - * in this routine. - */ - iocmd.cmd = SYNCHRONIZE_CACHE; - iocmd.flags = 0; - iocmd.physDiskNum = -1; - iocmd.data = NULL; - iocmd.data_dma = -1; - iocmd.size = 0; - iocmd.rsvd = iocmd.rsvd2 = 0; - - /* No SCSI hosts - */ - if (hd->Targets == NULL) - return 0; - - /* Skip the host - */ - if (id == hostId) - id++; - - /* Write SDP1 for all SCSI devices - * Alloc memory and set up config buffer - */ - if (ioc->bus_type == SCSI) { - if (ioc->spi_data.sdp1length > 0) { - pcfg1Data = (SCSIDevicePage1_t *)pci_alloc_consistent(ioc->pcidev, - ioc->spi_data.sdp1length * 4, &cfg1_dma_addr); - - if (pcfg1Data != NULL) { - doConfig = 1; - header1.PageVersion = ioc->spi_data.sdp1version; - header1.PageLength = ioc->spi_data.sdp1length; - header1.PageNumber = 1; - header1.PageType = MPI_CONFIG_PAGETYPE_SCSI_DEVICE; - cfg.cfghdr.hdr = &header1; - cfg.physAddr = cfg1_dma_addr; - cfg.action = MPI_CONFIG_ACTION_PAGE_WRITE_CURRENT; - cfg.dir = 1; - cfg.timeout = 0; - } - } - } + if ((ioc->bus_type != SPI) || + (!vdevice->configured_lun)) + return; - /* loop through all devices on this port - */ - while (bus < MPT_MAX_BUS) { - iocmd.bus = bus; - iocmd.id = id; - pTarget = hd->Targets[(int)id]; + if (!ioc->spi_data.sdp1length) + return; - if (doConfig) { + pcfg1Data = (SCSIDevicePage1_t *)pci_alloc_consistent(ioc->pcidev, + ioc->spi_data.sdp1length * 4, &cfg1_dma_addr); - /* Set the negotiation flags */ - if (pTarget && (pTarget = hd->Targets[id]) && !pTarget->raidVolume) { - flags = pTarget->negoFlags; - } else { - flags = hd->ioc->spi_data.noQas; - if (hd->ioc->spi_data.nvram && (hd->ioc->spi_data.nvram[id] != MPT_HOST_NVRAM_INVALID)) { - data = hd->ioc->spi_data.nvram[id]; + if (pcfg1Data == NULL) + return; - if (data & MPT_NVRAM_WIDE_DISABLE) - flags |= MPT_TARGET_NO_NEGO_WIDE; + header.PageVersion = ioc->spi_data.sdp1version; + header.PageLength = ioc->spi_data.sdp1length; + header.PageNumber = 1; + header.PageType = MPI_CONFIG_PAGETYPE_SCSI_DEVICE; + cfg.cfghdr.hdr = &header; + cfg.physAddr = cfg1_dma_addr; + cfg.action = MPI_CONFIG_ACTION_PAGE_WRITE_CURRENT; + cfg.dir = 1; + cfg.timeout = 0; - factor = (data & MPT_NVRAM_SYNC_MASK) >> MPT_NVRAM_SYNC_SHIFT; - if ((factor == 0) || (factor == MPT_ASYNC)) - flags |= MPT_TARGET_NO_NEGO_SYNC; - } + if (vtarget->raidVolume && ioc->raid_data.pIocPg3) { + for (i = 0; i < ioc->raid_data.pIocPg3->NumPhysDisks; i++) { + id = ioc->raid_data.pIocPg3->PhysDisk[i].PhysDiskID; + flags = hd->ioc->spi_data.noQas; + if (hd->ioc->spi_data.nvram && (hd->ioc->spi_data.nvram[id] != MPT_HOST_NVRAM_INVALID)) { + data = hd->ioc->spi_data.nvram[id]; + if (data & MPT_NVRAM_WIDE_DISABLE) + flags |= MPT_TARGET_NO_NEGO_WIDE; + factor = (data & MPT_NVRAM_SYNC_MASK) >> MPT_NVRAM_SYNC_SHIFT; + if ((factor == 0) || (factor == MPT_ASYNC)) + flags |= MPT_TARGET_NO_NEGO_SYNC; } - - /* Force to async, narrow */ mptscsih_setDevicePage1Flags(0, MPT_ASYNC, 0, &requested, - &configuration, flags); - dnegoprintk(("syncronize cache: id=%d width=0 factor=MPT_ASYNC " + &configuration, flags); + dnegoprintk(("nego asyn narrow: id=%d width=0 factor=MPT_ASYNC " "offset=0 negoFlags=%x request=%x config=%x\n", id, flags, requested, configuration)); pcfg1Data->RequestedParameters = cpu_to_le32(requested); pcfg1Data->Reserved = 0; pcfg1Data->Configuration = cpu_to_le32(configuration); - cfg.pageAddr = (bus<<8) | id; + cfg.pageAddr = (vtarget->bus_id<<8) | id; mpt_config(hd->ioc, &cfg); } + } else { + flags = vtarget->negoFlags; + mptscsih_setDevicePage1Flags(0, MPT_ASYNC, 0, &requested, + &configuration, flags); + dnegoprintk(("nego asyn narrow: id=%d width=0 factor=MPT_ASYNC " + "offset=0 negoFlags=%x request=%x config=%x\n", + vtarget->target_id, flags, requested, configuration)); + pcfg1Data->RequestedParameters = cpu_to_le32(requested); + pcfg1Data->Reserved = 0; + pcfg1Data->Configuration = cpu_to_le32(configuration); + cfg.pageAddr = (vtarget->bus_id<<8) | vtarget->target_id; + mpt_config(hd->ioc, &cfg); + } - /* If target Ptr NULL or if this target is NOT a disk, skip. - */ - if ((pTarget) && (pTarget->inq_data[0] == TYPE_DISK)){ - for (lun=0; lun <= MPT_LAST_LUN; lun++) { - /* If LUN present, issue the command - */ - lun_index = (lun >> 5); /* 32 luns per lun_index */ - indexed_lun = (lun % 32); - if (pTarget->luns[lun_index] & (1<<indexed_lun)) { - iocmd.lun = lun; - (void) mptscsih_do_cmd(hd, &iocmd); - } - } - } + if (pcfg1Data) + pci_free_consistent(ioc->pcidev, header.PageLength * 4, pcfg1Data, cfg1_dma_addr); +} + +/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ +/** + * mptscsih_synchronize_cache - Send SYNCHRONIZE_CACHE to all disks. + * @hd: Pointer to a SCSI HOST structure + * @vtarget: per device private data + * @lun: lun + * + * Uses the ISR, but with special processing. + * MUST be single-threaded. + * + */ +static void +mptscsih_synchronize_cache(MPT_SCSI_HOST *hd, VirtDevice *vdevice) +{ + INTERNAL_CMD iocmd; + + /* Following parameters will not change + * in this routine. + */ + iocmd.cmd = SYNCHRONIZE_CACHE; + iocmd.flags = 0; + iocmd.physDiskNum = -1; + iocmd.data = NULL; + iocmd.data_dma = -1; + iocmd.size = 0; + iocmd.rsvd = iocmd.rsvd2 = 0; + iocmd.bus = vdevice->bus_id; + iocmd.id = vdevice->target_id; + iocmd.lun = (u8)vdevice->lun; - /* get next relevant device */ - id++; + if ((vdevice->vtarget->type & TYPE_DISK) && + (vdevice->configured_lun)) + mptscsih_do_cmd(hd, &iocmd); +} - if (id == hostId) - id++; +/* Search IOC page 3 to determine if this is hidden physical disk + */ +static int +mptscsih_is_phys_disk(MPT_ADAPTER *ioc, int id) +{ + int i; - if (id > max_id) { - id = 0; - bus++; - } - } + if (!ioc->raid_data.isRaid || !ioc->raid_data.pIocPg3) + return 0; - if (pcfg1Data) { - pci_free_consistent(ioc->pcidev, header1.PageLength * 4, pcfg1Data, cfg1_dma_addr); + for (i = 0; i < ioc->raid_data.pIocPg3->NumPhysDisks; i++) { + if (id == ioc->raid_data.pIocPg3->PhysDisk[i].PhysDiskID) + return 1; } return 0; @@ -4101,8 +4090,8 @@ mptscsih_domainValidation(void *arg) msleep(250); - /* DV only to SCSI adapters */ - if (ioc->bus_type != SCSI) + /* DV only to SPI adapters */ + if (ioc->bus_type != SPI) continue; /* Make sure everything looks ok */ @@ -4205,32 +4194,12 @@ mptscsih_domainValidation(void *arg) return; } -/* Search IOC page 3 to determine if this is hidden physical disk - */ -/* Search IOC page 3 to determine if this is hidden physical disk - */ -static int -mptscsih_is_phys_disk(MPT_ADAPTER *ioc, int id) -{ - int i; - - if (!ioc->raid_data.isRaid || !ioc->raid_data.pIocPg3) - return 0; - - for (i = 0; i < ioc->raid_data.pIocPg3->NumPhysDisks; i++) { - if (id == ioc->raid_data.pIocPg3->PhysDisk[i].PhysDiskID) - return 1; - } - - return 0; -} - /* Write SDP1 if no QAS has been enabled */ static void mptscsih_qas_check(MPT_SCSI_HOST *hd, int id) { - VirtDevice *pTarget; + VirtTarget *vtarget; int ii; if (hd->Targets == NULL) @@ -4243,11 +4212,11 @@ mptscsih_qas_check(MPT_SCSI_HOST *hd, int id) if ((hd->ioc->spi_data.dvStatus[ii] & MPT_SCSICFG_DV_NOT_DONE) != 0) continue; - pTarget = hd->Targets[ii]; + vtarget = hd->Targets[ii]; - if ((pTarget != NULL) && (!pTarget->raidVolume)) { - if ((pTarget->negoFlags & hd->ioc->spi_data.noQas) == 0) { - pTarget->negoFlags |= hd->ioc->spi_data.noQas; + if ((vtarget != NULL) && (!vtarget->raidVolume)) { + if ((vtarget->negoFlags & hd->ioc->spi_data.noQas) == 0) { + vtarget->negoFlags |= hd->ioc->spi_data.noQas; dnegoprintk(("writeSDP1: id=%d flags=0\n", id)); mptscsih_writeSDP1(hd, 0, ii, 0); } @@ -4287,7 +4256,7 @@ static int mptscsih_doDv(MPT_SCSI_HOST *hd, int bus_number, int id) { MPT_ADAPTER *ioc = hd->ioc; - VirtDevice *pTarget; + VirtTarget *vtarget; SCSIDevicePage1_t *pcfg1Data; SCSIDevicePage0_t *pcfg0Data; u8 *pbuf1; @@ -4358,12 +4327,12 @@ mptscsih_doDv(MPT_SCSI_HOST *hd, int bus_number, int id) iocmd.physDiskNum = -1; iocmd.rsvd = iocmd.rsvd2 = 0; - pTarget = hd->Targets[id]; + vtarget = hd->Targets[id]; /* Use tagged commands if possible. */ - if (pTarget) { - if (pTarget->tflags & MPT_TARGET_FLAGS_Q_YES) + if (vtarget) { + if (vtarget->tflags & MPT_TARGET_FLAGS_Q_YES) iocmd.flags |= MPT_ICFLAG_TAGGED_CMD; else { if (hd->ioc->facts.FWVersion.Word < 0x01000600) @@ -4579,7 +4548,7 @@ mptscsih_doDv(MPT_SCSI_HOST *hd, int bus_number, int id) /* Reset the size for disks */ inq0 = (*pbuf1) & 0x1F; - if ((inq0 == 0) && pTarget && !pTarget->raidVolume) { + if ((inq0 == 0) && vtarget && !vtarget->raidVolume) { sz = 0x40; iocmd.size = sz; } @@ -4589,8 +4558,7 @@ mptscsih_doDv(MPT_SCSI_HOST *hd, int bus_number, int id) */ if (inq0 == TYPE_PROCESSOR) { mptscsih_initTarget(hd, - bus, - id, + vtarget, lun, pbuf1, sz); @@ -4604,22 +4572,22 @@ mptscsih_doDv(MPT_SCSI_HOST *hd, int bus_number, int id) goto target_done; if (sz == 0x40) { - if ((pTarget->maxWidth == 1) && (pTarget->maxOffset) && (nfactor < 0x0A) - && (pTarget->minSyncFactor > 0x09)) { + if ((vtarget->maxWidth == 1) && (vtarget->maxOffset) && (nfactor < 0x0A) + && (vtarget->minSyncFactor > 0x09)) { if ((pbuf1[56] & 0x04) == 0) ; else if ((pbuf1[56] & 0x01) == 1) { - pTarget->minSyncFactor = + vtarget->minSyncFactor = nfactor > MPT_ULTRA320 ? nfactor : MPT_ULTRA320; } else { - pTarget->minSyncFactor = + vtarget->minSyncFactor = nfactor > MPT_ULTRA160 ? nfactor : MPT_ULTRA160; } - dv.max.factor = pTarget->minSyncFactor; + dv.max.factor = vtarget->minSyncFactor; if ((pbuf1[56] & 0x02) == 0) { - pTarget->negoFlags |= MPT_TARGET_NO_NEGO_QAS; + vtarget->negoFlags |= MPT_TARGET_NO_NEGO_QAS; hd->ioc->spi_data.noQas = MPT_TARGET_NO_NEGO_QAS; ddvprintk((MYIOC_s_NOTE_FMT "DV: Start Basic noQas on id=%d due to pbuf1[56]=%x\n", @@ -4702,8 +4670,7 @@ mptscsih_doDv(MPT_SCSI_HOST *hd, int bus_number, int id) "DV:Inquiry compared id=%d, calling initTarget\n", ioc->name, id)); hd->ioc->spi_data.dvStatus[id] &= ~MPT_SCSICFG_DV_NOT_DONE; mptscsih_initTarget(hd, - bus, - id, + vtarget, lun, pbuf1, sz); @@ -5204,7 +5171,7 @@ target_done: static void mptscsih_dv_parms(MPT_SCSI_HOST *hd, DVPARAMETERS *dv,void *pPage) { - VirtDevice *pTarget; + VirtTarget *vtarget; SCSIDevicePage0_t *pPage0; SCSIDevicePage1_t *pPage1; int val = 0, data, configuration; @@ -5224,11 +5191,11 @@ mptscsih_dv_parms(MPT_SCSI_HOST *hd, DVPARAMETERS *dv,void *pPage) * already throttled back. */ negoFlags = hd->ioc->spi_data.noQas; - if ((hd->Targets)&&((pTarget = hd->Targets[(int)id]) != NULL) && !pTarget->raidVolume) { - width = pTarget->maxWidth; - offset = pTarget->maxOffset; - factor = pTarget->minSyncFactor; - negoFlags |= pTarget->negoFlags; + if ((hd->Targets)&&((vtarget = hd->Targets[(int)id]) != NULL) && !vtarget->raidVolume) { + width = vtarget->maxWidth; + offset = vtarget->maxOffset; + factor = vtarget->minSyncFactor; + negoFlags |= vtarget->negoFlags; } else { if (hd->ioc->spi_data.nvram && (hd->ioc->spi_data.nvram[id] != MPT_HOST_NVRAM_INVALID)) { data = hd->ioc->spi_data.nvram[id]; @@ -5430,11 +5397,11 @@ mptscsih_dv_parms(MPT_SCSI_HOST *hd, DVPARAMETERS *dv,void *pPage) * or overwrite nvram (phys disks only). */ - if ((hd->Targets)&&((pTarget = hd->Targets[(int)id]) != NULL) && !pTarget->raidVolume ) { - pTarget->maxWidth = dv->now.width; - pTarget->maxOffset = dv->now.offset; - pTarget->minSyncFactor = dv->now.factor; - pTarget->negoFlags = dv->now.flags; + if ((hd->Targets)&&((vtarget = hd->Targets[(int)id]) != NULL) && !vtarget->raidVolume ) { + vtarget->maxWidth = dv->now.width; + vtarget->maxOffset = dv->now.offset; + vtarget->minSyncFactor = dv->now.factor; + vtarget->negoFlags = dv->now.flags; } else { /* Preserv all flags, use * read-modify-write algorithm @@ -5588,6 +5555,94 @@ mptscsih_fillbuf(char *buffer, int size, int index, int width) break; } } + +/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ +/* If DV disabled (negoNvram set to USE_NVARM) or if not LUN 0, return. + * Else set the NEED_DV flag after Read Capacity Issued (disks) + * or Mode Sense (cdroms). + * + * Tapes, initTarget will set this flag on completion of Inquiry command. + * Called only if DV_NOT_DONE flag is set + */ +static void +mptscsih_set_dvflags(MPT_SCSI_HOST *hd, struct scsi_cmnd *sc) +{ + MPT_ADAPTER *ioc = hd->ioc; + u8 cmd; + SpiCfgData *pSpi; + + ddvtprintk((MYIOC_s_NOTE_FMT + " set_dvflags: id=%d lun=%d negoNvram=%x cmd=%x\n", + hd->ioc->name, sc->device->id, sc->device->lun , hd->negoNvram, sc->cmnd[0])); + + if ((sc->device->lun != 0) || (hd->negoNvram != 0)) + return; + + cmd = sc->cmnd[0]; + + if ((cmd == READ_CAPACITY) || (cmd == MODE_SENSE)) { + pSpi = &ioc->spi_data; + if ((ioc->raid_data.isRaid & (1 << sc->device->id)) && ioc->raid_data.pIocPg3) { + /* Set NEED_DV for all hidden disks + */ + Ioc3PhysDisk_t *pPDisk = ioc->raid_data.pIocPg3->PhysDisk; + int numPDisk = ioc->raid_data.pIocPg3->NumPhysDisks; + + while (numPDisk) { + pSpi->dvStatus[pPDisk->PhysDiskID] |= MPT_SCSICFG_NEED_DV; + ddvtprintk(("NEED_DV set for phys disk id %d\n", pPDisk->PhysDiskID)); + pPDisk++; + numPDisk--; + } + } + pSpi->dvStatus[sc->device->id] |= MPT_SCSICFG_NEED_DV; + ddvtprintk(("NEED_DV set for visible disk id %d\n", sc->device->id)); + } +} + +/* mptscsih_raid_set_dv_flags() + * + * New or replaced disk. Set DV flag and schedule DV. + */ +static void +mptscsih_set_dvflags_raid(MPT_SCSI_HOST *hd, int id) +{ + MPT_ADAPTER *ioc = hd->ioc; + SpiCfgData *pSpi = &ioc->spi_data; + Ioc3PhysDisk_t *pPDisk; + int numPDisk; + + if (hd->negoNvram != 0) + return; + + ddvtprintk(("DV requested for phys disk id %d\n", id)); + if (ioc->raid_data.pIocPg3) { + pPDisk = ioc->raid_data.pIocPg3->PhysDisk; + numPDisk = ioc->raid_data.pIocPg3->NumPhysDisks; + while (numPDisk) { + if (id == pPDisk->PhysDiskNum) { + pSpi->dvStatus[pPDisk->PhysDiskID] = + (MPT_SCSICFG_NEED_DV | MPT_SCSICFG_DV_NOT_DONE); + pSpi->forceDv = MPT_SCSICFG_NEED_DV; + ddvtprintk(("NEED_DV set for phys disk id %d\n", + pPDisk->PhysDiskID)); + break; + } + pPDisk++; + numPDisk--; + } + + if (numPDisk == 0) { + /* The physical disk that needs DV was not found + * in the stored IOC Page 3. The driver must reload + * this page. DV routine will set the NEED_DV flag for + * all phys disks that have DV_NOT_DONE set. + */ + pSpi->forceDv = MPT_SCSICFG_NEED_DV | MPT_SCSICFG_RELOAD_IOC_PG3; + ddvtprintk(("phys disk %d not found. Setting reload IOC Pg3 Flag\n",id)); + } + } +} #endif /* ~MPTSCSIH_ENABLE_DOMAIN_VALIDATION */ EXPORT_SYMBOL(mptscsih_remove); @@ -5599,7 +5654,9 @@ EXPORT_SYMBOL(mptscsih_resume); EXPORT_SYMBOL(mptscsih_proc_info); EXPORT_SYMBOL(mptscsih_info); EXPORT_SYMBOL(mptscsih_qcmd); +EXPORT_SYMBOL(mptscsih_target_alloc); EXPORT_SYMBOL(mptscsih_slave_alloc); +EXPORT_SYMBOL(mptscsih_target_destroy); EXPORT_SYMBOL(mptscsih_slave_destroy); EXPORT_SYMBOL(mptscsih_slave_configure); EXPORT_SYMBOL(mptscsih_abort); @@ -5614,5 +5671,6 @@ EXPORT_SYMBOL(mptscsih_event_process); EXPORT_SYMBOL(mptscsih_ioc_reset); EXPORT_SYMBOL(mptscsih_change_queue_depth); EXPORT_SYMBOL(mptscsih_timer_expired); +EXPORT_SYMBOL(mptscsih_TMHandler); /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ diff --git a/drivers/message/fusion/mptscsih.h b/drivers/message/fusion/mptscsih.h index 971fda4b8b5..44b248d51ea 100644 --- a/drivers/message/fusion/mptscsih.h +++ b/drivers/message/fusion/mptscsih.h @@ -91,7 +91,9 @@ extern int mptscsih_resume(struct pci_dev *pdev); extern int mptscsih_proc_info(struct Scsi_Host *host, char *buffer, char **start, off_t offset, int length, int func); extern const char * mptscsih_info(struct Scsi_Host *SChost); extern int mptscsih_qcmd(struct scsi_cmnd *SCpnt, void (*done)(struct scsi_cmnd *)); +extern int mptscsih_target_alloc(struct scsi_target *starget); extern int mptscsih_slave_alloc(struct scsi_device *device); +extern void mptscsih_target_destroy(struct scsi_target *starget); extern void mptscsih_slave_destroy(struct scsi_device *device); extern int mptscsih_slave_configure(struct scsi_device *device); extern int mptscsih_abort(struct scsi_cmnd * SCpnt); @@ -106,3 +108,4 @@ extern int mptscsih_event_process(MPT_ADAPTER *ioc, EventNotificationReply_t *pE extern int mptscsih_ioc_reset(MPT_ADAPTER *ioc, int post_reset); extern int mptscsih_change_queue_depth(struct scsi_device *sdev, int qdepth); extern void mptscsih_timer_expired(unsigned long data); +extern int mptscsih_TMHandler(MPT_SCSI_HOST *hd, u8 type, u8 channel, u8 target, u8 lun, int ctx2abort, ulong timeout); diff --git a/drivers/message/fusion/mptspi.c b/drivers/message/fusion/mptspi.c index 5c0e307d1d5..f148dfa3911 100644 --- a/drivers/message/fusion/mptspi.c +++ b/drivers/message/fusion/mptspi.c @@ -103,13 +103,16 @@ static int mptspiTaskCtx = -1; static int mptspiInternalCtx = -1; /* Used only for internal commands */ static struct scsi_host_template mptspi_driver_template = { + .module = THIS_MODULE, .proc_name = "mptspi", .proc_info = mptscsih_proc_info, .name = "MPT SPI Host", .info = mptscsih_info, .queuecommand = mptscsih_qcmd, + .target_alloc = mptscsih_target_alloc, .slave_alloc = mptscsih_slave_alloc, .slave_configure = mptscsih_slave_configure, + .target_destroy = mptscsih_target_destroy, .slave_destroy = mptscsih_slave_destroy, .change_queue_depth = mptscsih_change_queue_depth, .eh_abort_handler = mptscsih_abort, @@ -155,11 +158,10 @@ mptspi_probe(struct pci_dev *pdev, const struct pci_device_id *id) MPT_SCSI_HOST *hd; MPT_ADAPTER *ioc; unsigned long flags; - int sz, ii; + int ii; int numSGE = 0; int scale; int ioc_cap; - u8 *mem; int error=0; int r; @@ -177,13 +179,15 @@ mptspi_probe(struct pci_dev *pdev, const struct pci_device_id *id) printk(MYIOC_s_WARN_FMT "Skipping because it's not operational!\n", ioc->name); - return -ENODEV; + error = -ENODEV; + goto out_mptspi_probe; } if (!ioc->active) { printk(MYIOC_s_WARN_FMT "Skipping because it's disabled!\n", ioc->name); - return -ENODEV; + error = -ENODEV; + goto out_mptspi_probe; } /* Sanity check - ensure at least 1 port is INITIATOR capable @@ -208,7 +212,8 @@ mptspi_probe(struct pci_dev *pdev, const struct pci_device_id *id) printk(MYIOC_s_WARN_FMT "Unable to register controller with SCSI subsystem\n", ioc->name); - return -1; + error = -1; + goto out_mptspi_probe; } spin_lock_irqsave(&ioc->FreeQlock, flags); @@ -282,36 +287,27 @@ mptspi_probe(struct pci_dev *pdev, const struct pci_device_id *id) /* SCSI needs scsi_cmnd lookup table! * (with size equal to req_depth*PtrSz!) */ - sz = ioc->req_depth * sizeof(void *); - mem = kmalloc(sz, GFP_ATOMIC); - if (mem == NULL) { + hd->ScsiLookup = kcalloc(ioc->req_depth, sizeof(void *), GFP_ATOMIC); + if (!hd->ScsiLookup) { error = -ENOMEM; - goto mptspi_probe_failed; + goto out_mptspi_probe; } - memset(mem, 0, sz); - hd->ScsiLookup = (struct scsi_cmnd **) mem; - - dprintk((MYIOC_s_INFO_FMT "ScsiLookup @ %p, sz=%d\n", - ioc->name, hd->ScsiLookup, sz)); + dprintk((MYIOC_s_INFO_FMT "ScsiLookup @ %p\n", + ioc->name, hd->ScsiLookup)); /* Allocate memory for the device structures. * A non-Null pointer at an offset * indicates a device exists. * max_id = 1 + maximum id (hosts.h) */ - sz = sh->max_id * sizeof(void *); - mem = kmalloc(sz, GFP_ATOMIC); - if (mem == NULL) { + hd->Targets = kcalloc(sh->max_id, sizeof(void *), GFP_ATOMIC); + if (!hd->Targets) { error = -ENOMEM; - goto mptspi_probe_failed; + goto out_mptspi_probe; } - memset(mem, 0, sz); - hd->Targets = (VirtDevice **) mem; - - dprintk((KERN_INFO - " Targets @ %p, sz=%d\n", hd->Targets, sz)); + dprintk((KERN_INFO " vdev @ %p\n", hd->Targets)); /* Clear the TM flags */ @@ -385,13 +381,21 @@ mptspi_probe(struct pci_dev *pdev, const struct pci_device_id *id) if(error) { dprintk((KERN_ERR MYNAM "scsi_add_host failed\n")); - goto mptspi_probe_failed; + goto out_mptspi_probe; } + /* + * issue internal bus reset + */ + if (ioc->spi_data.bus_reset) + mptscsih_TMHandler(hd, + MPI_SCSITASKMGMT_TASKTYPE_RESET_BUS, + 0, 0, 0, 0, 5); + scsi_scan_host(sh); return 0; -mptspi_probe_failed: +out_mptspi_probe: mptscsih_remove(pdev); return error; @@ -449,7 +453,7 @@ static void __exit mptspi_exit(void) { pci_unregister_driver(&mptspi_driver); - + mpt_reset_deregister(mptspiDoneCtx); dprintk((KERN_INFO MYNAM ": Deregistered for IOC reset notifications\n")); diff --git a/drivers/message/i2o/Kconfig b/drivers/message/i2o/Kconfig index 43a942a29c2..fef67710388 100644 --- a/drivers/message/i2o/Kconfig +++ b/drivers/message/i2o/Kconfig @@ -24,6 +24,18 @@ config I2O If unsure, say N. +config I2O_LCT_NOTIFY_ON_CHANGES + bool "Enable LCT notification" + depends on I2O + default y + ---help--- + Only say N here if you have a I2O controller from SUN. The SUN + firmware doesn't support LCT notification on changes. If this option + is enabled on such a controller the driver will hang up in a endless + loop. On all other controllers say Y. + + If unsure, say Y. + config I2O_EXT_ADAPTEC bool "Enable Adaptec extensions" depends on I2O diff --git a/drivers/message/i2o/README.ioctl b/drivers/message/i2o/README.ioctl index 73dd084c0e9..65c0c47aeb7 100644 --- a/drivers/message/i2o/README.ioctl +++ b/drivers/message/i2o/README.ioctl @@ -185,7 +185,7 @@ VII. Getting Parameters ENOMEM Kernel memory allocation error A return value of 0 does not mean that the value was actually - properly retreived. The user should check the result list + properly retrieved. The user should check the result list to determine the specific status of the transaction. VIII. Downloading Software diff --git a/drivers/message/i2o/bus-osm.c b/drivers/message/i2o/bus-osm.c index 151b228e1cb..ac06f10c54e 100644 --- a/drivers/message/i2o/bus-osm.c +++ b/drivers/message/i2o/bus-osm.c @@ -17,7 +17,7 @@ #include <linux/i2o.h> #define OSM_NAME "bus-osm" -#define OSM_VERSION "$Rev$" +#define OSM_VERSION "1.317" #define OSM_DESCRIPTION "I2O Bus Adapter OSM" static struct i2o_driver i2o_bus_driver; @@ -39,18 +39,18 @@ static struct i2o_class_id i2o_bus_class_id[] = { */ static int i2o_bus_scan(struct i2o_device *dev) { - struct i2o_message __iomem *msg; - u32 m; + struct i2o_message *msg; - m = i2o_msg_get_wait(dev->iop, &msg, I2O_TIMEOUT_MESSAGE_GET); - if (m == I2O_QUEUE_EMPTY) + msg = i2o_msg_get_wait(dev->iop, I2O_TIMEOUT_MESSAGE_GET); + if (IS_ERR(msg)) return -ETIMEDOUT; - writel(FIVE_WORD_MSG_SIZE | SGL_OFFSET_0, &msg->u.head[0]); - writel(I2O_CMD_BUS_SCAN << 24 | HOST_TID << 12 | dev->lct_data.tid, - &msg->u.head[1]); + msg->u.head[0] = cpu_to_le32(FIVE_WORD_MSG_SIZE | SGL_OFFSET_0); + msg->u.head[1] = + cpu_to_le32(I2O_CMD_BUS_SCAN << 24 | HOST_TID << 12 | dev->lct_data. + tid); - return i2o_msg_post_wait(dev->iop, m, 60); + return i2o_msg_post_wait(dev->iop, msg, 60); }; /** @@ -59,8 +59,9 @@ static int i2o_bus_scan(struct i2o_device *dev) * * Returns count. */ -static ssize_t i2o_bus_store_scan(struct device *d, struct device_attribute *attr, const char *buf, - size_t count) +static ssize_t i2o_bus_store_scan(struct device *d, + struct device_attribute *attr, + const char *buf, size_t count) { struct i2o_device *i2o_dev = to_i2o_device(d); int rc; diff --git a/drivers/message/i2o/config-osm.c b/drivers/message/i2o/config-osm.c index 10432f66520..3bba7aa82e5 100644 --- a/drivers/message/i2o/config-osm.c +++ b/drivers/message/i2o/config-osm.c @@ -22,7 +22,7 @@ #include <asm/uaccess.h> #define OSM_NAME "config-osm" -#define OSM_VERSION "1.248" +#define OSM_VERSION "1.323" #define OSM_DESCRIPTION "I2O Configuration OSM" /* access mode user rw */ diff --git a/drivers/message/i2o/core.h b/drivers/message/i2o/core.h index 9eefedb1621..90628562851 100644 --- a/drivers/message/i2o/core.h +++ b/drivers/message/i2o/core.h @@ -14,8 +14,6 @@ */ /* Exec-OSM */ -extern struct bus_type i2o_bus_type; - extern struct i2o_driver i2o_exec_driver; extern int i2o_exec_lct_get(struct i2o_controller *); @@ -23,6 +21,8 @@ extern int __init i2o_exec_init(void); extern void __exit i2o_exec_exit(void); /* driver */ +extern struct bus_type i2o_bus_type; + extern int i2o_driver_dispatch(struct i2o_controller *, u32); extern int __init i2o_driver_init(void); @@ -33,19 +33,27 @@ extern int __init i2o_pci_init(void); extern void __exit i2o_pci_exit(void); /* device */ +extern struct device_attribute i2o_device_attrs[]; + extern void i2o_device_remove(struct i2o_device *); extern int i2o_device_parse_lct(struct i2o_controller *); /* IOP */ extern struct i2o_controller *i2o_iop_alloc(void); -extern void i2o_iop_free(struct i2o_controller *); + +/** + * i2o_iop_free - Free the i2o_controller struct + * @c: I2O controller to free + */ +static inline void i2o_iop_free(struct i2o_controller *c) +{ + i2o_pool_free(&c->in_msg); + kfree(c); +} extern int i2o_iop_add(struct i2o_controller *); extern void i2o_iop_remove(struct i2o_controller *); -/* config */ -extern int i2o_parm_issue(struct i2o_device *, int, void *, int, void *, int); - /* control registers relative to c->base */ #define I2O_IRQ_STATUS 0x30 #define I2O_IRQ_MASK 0x34 diff --git a/drivers/message/i2o/device.c b/drivers/message/i2o/device.c index 8eb50cdb8ae..ee183053fa2 100644 --- a/drivers/message/i2o/device.c +++ b/drivers/message/i2o/device.c @@ -35,18 +35,18 @@ static inline int i2o_device_issue_claim(struct i2o_device *dev, u32 cmd, u32 type) { - struct i2o_message __iomem *msg; - u32 m; + struct i2o_message *msg; - m = i2o_msg_get_wait(dev->iop, &msg, I2O_TIMEOUT_MESSAGE_GET); - if (m == I2O_QUEUE_EMPTY) - return -ETIMEDOUT; + msg = i2o_msg_get_wait(dev->iop, I2O_TIMEOUT_MESSAGE_GET); + if (IS_ERR(msg)) + return PTR_ERR(msg); - writel(FIVE_WORD_MSG_SIZE | SGL_OFFSET_0, &msg->u.head[0]); - writel(cmd << 24 | HOST_TID << 12 | dev->lct_data.tid, &msg->u.head[1]); - writel(type, &msg->body[0]); + msg->u.head[0] = cpu_to_le32(FIVE_WORD_MSG_SIZE | SGL_OFFSET_0); + msg->u.head[1] = + cpu_to_le32(cmd << 24 | HOST_TID << 12 | dev->lct_data.tid); + msg->body[0] = cpu_to_le32(type); - return i2o_msg_post_wait(dev->iop, m, 60); + return i2o_msg_post_wait(dev->iop, msg, 60); } /** @@ -123,7 +123,6 @@ int i2o_device_claim_release(struct i2o_device *dev) return rc; } - /** * i2o_device_release - release the memory for a I2O device * @dev: I2O device which should be released @@ -140,10 +139,10 @@ static void i2o_device_release(struct device *dev) kfree(i2o_dev); } - /** - * i2o_device_class_show_class_id - Displays class id of I2O device - * @cd: class device of which the class id should be displayed + * i2o_device_show_class_id - Displays class id of I2O device + * @dev: device of which the class id should be displayed + * @attr: pointer to device attribute * @buf: buffer into which the class id should be printed * * Returns the number of bytes which are printed into the buffer. @@ -159,15 +158,15 @@ static ssize_t i2o_device_show_class_id(struct device *dev, } /** - * i2o_device_class_show_tid - Displays TID of I2O device - * @cd: class device of which the TID should be displayed - * @buf: buffer into which the class id should be printed + * i2o_device_show_tid - Displays TID of I2O device + * @dev: device of which the TID should be displayed + * @attr: pointer to device attribute + * @buf: buffer into which the TID should be printed * * Returns the number of bytes which are printed into the buffer. */ static ssize_t i2o_device_show_tid(struct device *dev, - struct device_attribute *attr, - char *buf) + struct device_attribute *attr, char *buf) { struct i2o_device *i2o_dev = to_i2o_device(dev); @@ -175,6 +174,7 @@ static ssize_t i2o_device_show_tid(struct device *dev, return strlen(buf) + 1; } +/* I2O device attributes */ struct device_attribute i2o_device_attrs[] = { __ATTR(class_id, S_IRUGO, i2o_device_show_class_id, NULL), __ATTR(tid, S_IRUGO, i2o_device_show_tid, NULL), @@ -193,12 +193,10 @@ static struct i2o_device *i2o_device_alloc(void) { struct i2o_device *dev; - dev = kmalloc(sizeof(*dev), GFP_KERNEL); + dev = kzalloc(sizeof(*dev), GFP_KERNEL); if (!dev) return ERR_PTR(-ENOMEM); - memset(dev, 0, sizeof(*dev)); - INIT_LIST_HEAD(&dev->list); init_MUTEX(&dev->lock); @@ -209,66 +207,6 @@ static struct i2o_device *i2o_device_alloc(void) } /** - * i2o_setup_sysfs_links - Adds attributes to the I2O device - * @cd: I2O class device which is added to the I2O device class - * - * This function get called when a I2O device is added to the class. It - * creates the attributes for each device and creates user/parent symlink - * if necessary. - * - * Returns 0 on success or negative error code on failure. - */ -static void i2o_setup_sysfs_links(struct i2o_device *i2o_dev) -{ - struct i2o_controller *c = i2o_dev->iop; - struct i2o_device *tmp; - - /* create user entries for this device */ - tmp = i2o_iop_find_device(i2o_dev->iop, i2o_dev->lct_data.user_tid); - if (tmp && tmp != i2o_dev) - sysfs_create_link(&i2o_dev->device.kobj, - &tmp->device.kobj, "user"); - - /* create user entries refering to this device */ - list_for_each_entry(tmp, &c->devices, list) - if (tmp->lct_data.user_tid == i2o_dev->lct_data.tid && - tmp != i2o_dev) - sysfs_create_link(&tmp->device.kobj, - &i2o_dev->device.kobj, "user"); - - /* create parent entries for this device */ - tmp = i2o_iop_find_device(i2o_dev->iop, i2o_dev->lct_data.parent_tid); - if (tmp && tmp != i2o_dev) - sysfs_create_link(&i2o_dev->device.kobj, - &tmp->device.kobj, "parent"); - - /* create parent entries refering to this device */ - list_for_each_entry(tmp, &c->devices, list) - if (tmp->lct_data.parent_tid == i2o_dev->lct_data.tid && - tmp != i2o_dev) - sysfs_create_link(&tmp->device.kobj, - &i2o_dev->device.kobj, "parent"); -} - -static void i2o_remove_sysfs_links(struct i2o_device *i2o_dev) -{ - struct i2o_controller *c = i2o_dev->iop; - struct i2o_device *tmp; - - sysfs_remove_link(&i2o_dev->device.kobj, "parent"); - sysfs_remove_link(&i2o_dev->device.kobj, "user"); - - list_for_each_entry(tmp, &c->devices, list) { - if (tmp->lct_data.parent_tid == i2o_dev->lct_data.tid) - sysfs_remove_link(&tmp->device.kobj, "parent"); - if (tmp->lct_data.user_tid == i2o_dev->lct_data.tid) - sysfs_remove_link(&tmp->device.kobj, "user"); - } -} - - - -/** * i2o_device_add - allocate a new I2O device and add it to the IOP * @iop: I2O controller where the device is on * @entry: LCT entry of the I2O device @@ -282,33 +220,57 @@ static void i2o_remove_sysfs_links(struct i2o_device *i2o_dev) static struct i2o_device *i2o_device_add(struct i2o_controller *c, i2o_lct_entry * entry) { - struct i2o_device *dev; + struct i2o_device *i2o_dev, *tmp; - dev = i2o_device_alloc(); - if (IS_ERR(dev)) { + i2o_dev = i2o_device_alloc(); + if (IS_ERR(i2o_dev)) { printk(KERN_ERR "i2o: unable to allocate i2o device\n"); - return dev; + return i2o_dev; } - dev->lct_data = *entry; - dev->iop = c; + i2o_dev->lct_data = *entry; - snprintf(dev->device.bus_id, BUS_ID_SIZE, "%d:%03x", c->unit, - dev->lct_data.tid); + snprintf(i2o_dev->device.bus_id, BUS_ID_SIZE, "%d:%03x", c->unit, + i2o_dev->lct_data.tid); - dev->device.parent = &c->device; + i2o_dev->iop = c; + i2o_dev->device.parent = &c->device; - device_register(&dev->device); + device_register(&i2o_dev->device); - list_add_tail(&dev->list, &c->devices); + list_add_tail(&i2o_dev->list, &c->devices); - i2o_setup_sysfs_links(dev); + /* create user entries for this device */ + tmp = i2o_iop_find_device(i2o_dev->iop, i2o_dev->lct_data.user_tid); + if (tmp && (tmp != i2o_dev)) + sysfs_create_link(&i2o_dev->device.kobj, &tmp->device.kobj, + "user"); - i2o_driver_notify_device_add_all(dev); + /* create user entries refering to this device */ + list_for_each_entry(tmp, &c->devices, list) + if ((tmp->lct_data.user_tid == i2o_dev->lct_data.tid) + && (tmp != i2o_dev)) + sysfs_create_link(&tmp->device.kobj, + &i2o_dev->device.kobj, "user"); - pr_debug("i2o: device %s added\n", dev->device.bus_id); + /* create parent entries for this device */ + tmp = i2o_iop_find_device(i2o_dev->iop, i2o_dev->lct_data.parent_tid); + if (tmp && (tmp != i2o_dev)) + sysfs_create_link(&i2o_dev->device.kobj, &tmp->device.kobj, + "parent"); - return dev; + /* create parent entries refering to this device */ + list_for_each_entry(tmp, &c->devices, list) + if ((tmp->lct_data.parent_tid == i2o_dev->lct_data.tid) + && (tmp != i2o_dev)) + sysfs_create_link(&tmp->device.kobj, + &i2o_dev->device.kobj, "parent"); + + i2o_driver_notify_device_add_all(i2o_dev); + + pr_debug("i2o: device %s added\n", i2o_dev->device.bus_id); + + return i2o_dev; } /** @@ -321,9 +283,22 @@ static struct i2o_device *i2o_device_add(struct i2o_controller *c, */ void i2o_device_remove(struct i2o_device *i2o_dev) { + struct i2o_device *tmp; + struct i2o_controller *c = i2o_dev->iop; + i2o_driver_notify_device_remove_all(i2o_dev); - i2o_remove_sysfs_links(i2o_dev); + + sysfs_remove_link(&i2o_dev->device.kobj, "parent"); + sysfs_remove_link(&i2o_dev->device.kobj, "user"); + + list_for_each_entry(tmp, &c->devices, list) { + if (tmp->lct_data.parent_tid == i2o_dev->lct_data.tid) + sysfs_remove_link(&tmp->device.kobj, "parent"); + if (tmp->lct_data.user_tid == i2o_dev->lct_data.tid) + sysfs_remove_link(&tmp->device.kobj, "user"); + } list_del(&i2o_dev->list); + device_unregister(&i2o_dev->device); } @@ -341,56 +316,83 @@ int i2o_device_parse_lct(struct i2o_controller *c) { struct i2o_device *dev, *tmp; i2o_lct *lct; - int i; - int max; + u32 *dlct = c->dlct.virt; + int max = 0, i = 0; + u16 table_size; + u32 buf; down(&c->lct_lock); kfree(c->lct); - lct = c->dlct.virt; + buf = le32_to_cpu(*dlct++); + table_size = buf & 0xffff; - c->lct = kmalloc(lct->table_size * 4, GFP_KERNEL); - if (!c->lct) { + lct = c->lct = kmalloc(table_size * 4, GFP_KERNEL); + if (!lct) { up(&c->lct_lock); return -ENOMEM; } - if (lct->table_size * 4 > c->dlct.len) { - memcpy(c->lct, c->dlct.virt, c->dlct.len); - up(&c->lct_lock); - return -EAGAIN; - } + lct->lct_ver = buf >> 28; + lct->boot_tid = buf >> 16 & 0xfff; + lct->table_size = table_size; + lct->change_ind = le32_to_cpu(*dlct++); + lct->iop_flags = le32_to_cpu(*dlct++); - memcpy(c->lct, c->dlct.virt, lct->table_size * 4); - - lct = c->lct; - - max = (lct->table_size - 3) / 9; + table_size -= 3; pr_debug("%s: LCT has %d entries (LCT size: %d)\n", c->name, max, lct->table_size); - /* remove devices, which are not in the LCT anymore */ - list_for_each_entry_safe(dev, tmp, &c->devices, list) { + while (table_size > 0) { + i2o_lct_entry *entry = &lct->lct_entry[max]; int found = 0; - for (i = 0; i < max; i++) { - if (lct->lct_entry[i].tid == dev->lct_data.tid) { + buf = le32_to_cpu(*dlct++); + entry->entry_size = buf & 0xffff; + entry->tid = buf >> 16 & 0xfff; + + entry->change_ind = le32_to_cpu(*dlct++); + entry->device_flags = le32_to_cpu(*dlct++); + + buf = le32_to_cpu(*dlct++); + entry->class_id = buf & 0xfff; + entry->version = buf >> 12 & 0xf; + entry->vendor_id = buf >> 16; + + entry->sub_class = le32_to_cpu(*dlct++); + + buf = le32_to_cpu(*dlct++); + entry->user_tid = buf & 0xfff; + entry->parent_tid = buf >> 12 & 0xfff; + entry->bios_info = buf >> 24; + + memcpy(&entry->identity_tag, dlct, 8); + dlct += 2; + + entry->event_capabilities = le32_to_cpu(*dlct++); + + /* add new devices, which are new in the LCT */ + list_for_each_entry_safe(dev, tmp, &c->devices, list) { + if (entry->tid == dev->lct_data.tid) { found = 1; break; } } if (!found) - i2o_device_remove(dev); + i2o_device_add(c, entry); + + table_size -= 9; + max++; } - /* add new devices, which are new in the LCT */ - for (i = 0; i < max; i++) { + /* remove devices, which are not in the LCT anymore */ + list_for_each_entry_safe(dev, tmp, &c->devices, list) { int found = 0; - list_for_each_entry_safe(dev, tmp, &c->devices, list) { + for (i = 0; i < max; i++) { if (lct->lct_entry[i].tid == dev->lct_data.tid) { found = 1; break; @@ -398,14 +400,14 @@ int i2o_device_parse_lct(struct i2o_controller *c) } if (!found) - i2o_device_add(c, &lct->lct_entry[i]); + i2o_device_remove(dev); } + up(&c->lct_lock); return 0; } - /* * Run time support routines */ @@ -419,13 +421,9 @@ int i2o_device_parse_lct(struct i2o_controller *c) * ResultCount, ErrorInfoSize, BlockStatus and BlockSize. */ int i2o_parm_issue(struct i2o_device *i2o_dev, int cmd, void *oplist, - int oplen, void *reslist, int reslen) + int oplen, void *reslist, int reslen) { - struct i2o_message __iomem *msg; - u32 m; - u32 *res32 = (u32 *) reslist; - u32 *restmp = (u32 *) reslist; - int len = 0; + struct i2o_message *msg; int i = 0; int rc; struct i2o_dma res; @@ -437,26 +435,27 @@ int i2o_parm_issue(struct i2o_device *i2o_dev, int cmd, void *oplist, if (i2o_dma_alloc(dev, &res, reslen, GFP_KERNEL)) return -ENOMEM; - m = i2o_msg_get_wait(c, &msg, I2O_TIMEOUT_MESSAGE_GET); - if (m == I2O_QUEUE_EMPTY) { + msg = i2o_msg_get_wait(c, I2O_TIMEOUT_MESSAGE_GET); + if (IS_ERR(msg)) { i2o_dma_free(dev, &res); - return -ETIMEDOUT; + return PTR_ERR(msg); } i = 0; - writel(cmd << 24 | HOST_TID << 12 | i2o_dev->lct_data.tid, - &msg->u.head[1]); - writel(0, &msg->body[i++]); - writel(0x4C000000 | oplen, &msg->body[i++]); /* OperationList */ - memcpy_toio(&msg->body[i], oplist, oplen); + msg->u.head[1] = + cpu_to_le32(cmd << 24 | HOST_TID << 12 | i2o_dev->lct_data.tid); + msg->body[i++] = cpu_to_le32(0x00000000); + msg->body[i++] = cpu_to_le32(0x4C000000 | oplen); /* OperationList */ + memcpy(&msg->body[i], oplist, oplen); i += (oplen / 4 + (oplen % 4 ? 1 : 0)); - writel(0xD0000000 | res.len, &msg->body[i++]); /* ResultList */ - writel(res.phys, &msg->body[i++]); + msg->body[i++] = cpu_to_le32(0xD0000000 | res.len); /* ResultList */ + msg->body[i++] = cpu_to_le32(res.phys); - writel(I2O_MESSAGE_SIZE(i + sizeof(struct i2o_message) / 4) | - SGL_OFFSET_5, &msg->u.head[0]); + msg->u.head[0] = + cpu_to_le32(I2O_MESSAGE_SIZE(i + sizeof(struct i2o_message) / 4) | + SGL_OFFSET_5); - rc = i2o_msg_post_wait_mem(c, m, 10, &res); + rc = i2o_msg_post_wait_mem(c, msg, 10, &res); /* This only looks like a memory leak - don't "fix" it. */ if (rc == -ETIMEDOUT) @@ -465,36 +464,7 @@ int i2o_parm_issue(struct i2o_device *i2o_dev, int cmd, void *oplist, memcpy(reslist, res.virt, res.len); i2o_dma_free(dev, &res); - /* Query failed */ - if (rc) - return rc; - /* - * Calculate number of bytes of Result LIST - * We need to loop through each Result BLOCK and grab the length - */ - restmp = res32 + 1; - len = 1; - for (i = 0; i < (res32[0] & 0X0000FFFF); i++) { - if (restmp[0] & 0x00FF0000) { /* BlockStatus != SUCCESS */ - printk(KERN_WARNING - "%s - Error:\n ErrorInfoSize = 0x%02x, " - "BlockStatus = 0x%02x, BlockSize = 0x%04x\n", - (cmd == - I2O_CMD_UTIL_PARAMS_SET) ? "PARAMS_SET" : - "PARAMS_GET", res32[1] >> 24, - (res32[1] >> 16) & 0xFF, res32[1] & 0xFFFF); - - /* - * If this is the only request,than we return an error - */ - if ((res32[0] & 0x0000FFFF) == 1) { - return -((res32[1] >> 16) & 0xFF); /* -BlockStatus */ - } - } - len += restmp[0] & 0x0000FFFF; /* Length of res BLOCK */ - restmp += restmp[0] & 0x0000FFFF; /* Skip to next BLOCK */ - } - return (len << 2); /* bytes used by result list */ + return rc; } /* @@ -503,28 +473,25 @@ int i2o_parm_issue(struct i2o_device *i2o_dev, int cmd, void *oplist, int i2o_parm_field_get(struct i2o_device *i2o_dev, int group, int field, void *buf, int buflen) { - u16 opblk[] = { 1, 0, I2O_PARAMS_FIELD_GET, group, 1, field }; + u32 opblk[] = { cpu_to_le32(0x00000001), + cpu_to_le32((u16) group << 16 | I2O_PARAMS_FIELD_GET), + cpu_to_le32((s16) field << 16 | 0x00000001) + }; u8 *resblk; /* 8 bytes for header */ - int size; - - if (field == -1) /* whole group */ - opblk[4] = -1; + int rc; resblk = kmalloc(buflen + 8, GFP_KERNEL | GFP_ATOMIC); if (!resblk) return -ENOMEM; - size = i2o_parm_issue(i2o_dev, I2O_CMD_UTIL_PARAMS_GET, opblk, - sizeof(opblk), resblk, buflen + 8); + rc = i2o_parm_issue(i2o_dev, I2O_CMD_UTIL_PARAMS_GET, opblk, + sizeof(opblk), resblk, buflen + 8); memcpy(buf, resblk + 8, buflen); /* cut off header */ kfree(resblk); - if (size > buflen) - return buflen; - - return size; + return rc; } /* @@ -534,12 +501,12 @@ int i2o_parm_field_get(struct i2o_device *i2o_dev, int group, int field, * else return specific fields * ibuf contains fieldindexes * - * if oper == I2O_PARAMS_LIST_GET, get from specific rows - * if fieldcount == -1 return all fields + * if oper == I2O_PARAMS_LIST_GET, get from specific rows + * if fieldcount == -1 return all fields * ibuf contains rowcount, keyvalues - * else return specific fields + * else return specific fields * fieldcount is # of fieldindexes - * ibuf contains fieldindexes, rowcount, keyvalues + * ibuf contains fieldindexes, rowcount, keyvalues * * You could also use directly function i2o_issue_params(). */ diff --git a/drivers/message/i2o/driver.c b/drivers/message/i2o/driver.c index 0fb9c4e2ad4..64130227574 100644 --- a/drivers/message/i2o/driver.c +++ b/drivers/message/i2o/driver.c @@ -61,12 +61,10 @@ static int i2o_bus_match(struct device *dev, struct device_driver *drv) }; /* I2O bus type */ -extern struct device_attribute i2o_device_attrs[]; - struct bus_type i2o_bus_type = { .name = "i2o", .match = i2o_bus_match, - .dev_attrs = i2o_device_attrs, + .dev_attrs = i2o_device_attrs }; /** @@ -219,14 +217,14 @@ int i2o_driver_dispatch(struct i2o_controller *c, u32 m) /* cut of header from message size (in 32-bit words) */ size = (le32_to_cpu(msg->u.head[0]) >> 16) - 5; - evt = kmalloc(size * 4 + sizeof(*evt), GFP_ATOMIC | __GFP_ZERO); + evt = kzalloc(size * 4 + sizeof(*evt), GFP_ATOMIC); if (!evt) return -ENOMEM; evt->size = size; evt->tcntxt = le32_to_cpu(msg->u.s.tcntxt); evt->event_indicator = le32_to_cpu(msg->body[0]); - memcpy(&evt->tcntxt, &msg->u.s.tcntxt, size * 4); + memcpy(&evt->data, &msg->body[1], size * 4); list_for_each_entry_safe(dev, tmp, &c->devices, list) if (dev->lct_data.tid == tid) { @@ -349,12 +347,10 @@ int __init i2o_driver_init(void) osm_info("max drivers = %d\n", i2o_max_drivers); i2o_drivers = - kmalloc(i2o_max_drivers * sizeof(*i2o_drivers), GFP_KERNEL); + kzalloc(i2o_max_drivers * sizeof(*i2o_drivers), GFP_KERNEL); if (!i2o_drivers) return -ENOMEM; - memset(i2o_drivers, 0, i2o_max_drivers * sizeof(*i2o_drivers)); - rc = bus_register(&i2o_bus_type); if (rc < 0) diff --git a/drivers/message/i2o/exec-osm.c b/drivers/message/i2o/exec-osm.c index 9c339a2505b..9bb9859f6df 100644 --- a/drivers/message/i2o/exec-osm.c +++ b/drivers/message/i2o/exec-osm.c @@ -33,7 +33,7 @@ #include <linux/workqueue.h> #include <linux/string.h> #include <linux/slab.h> -#include <linux/sched.h> /* wait_event_interruptible_timeout() needs this */ +#include <linux/sched.h> /* wait_event_interruptible_timeout() needs this */ #include <asm/param.h> /* HZ */ #include "core.h" @@ -75,11 +75,9 @@ static struct i2o_exec_wait *i2o_exec_wait_alloc(void) { struct i2o_exec_wait *wait; - wait = kmalloc(sizeof(*wait), GFP_KERNEL); + wait = kzalloc(sizeof(*wait), GFP_KERNEL); if (!wait) - return ERR_PTR(-ENOMEM); - - memset(wait, 0, sizeof(*wait)); + return NULL; INIT_LIST_HEAD(&wait->list); @@ -114,13 +112,12 @@ static void i2o_exec_wait_free(struct i2o_exec_wait *wait) * Returns 0 on success, negative error code on timeout or positive error * code from reply. */ -int i2o_msg_post_wait_mem(struct i2o_controller *c, u32 m, unsigned long - timeout, struct i2o_dma *dma) +int i2o_msg_post_wait_mem(struct i2o_controller *c, struct i2o_message *msg, + unsigned long timeout, struct i2o_dma *dma) { DECLARE_WAIT_QUEUE_HEAD(wq); struct i2o_exec_wait *wait; static u32 tcntxt = 0x80000000; - struct i2o_message __iomem *msg = i2o_msg_in_to_virt(c, m); int rc = 0; wait = i2o_exec_wait_alloc(); @@ -138,15 +135,15 @@ int i2o_msg_post_wait_mem(struct i2o_controller *c, u32 m, unsigned long * We will only use transaction contexts >= 0x80000000 for POST WAIT, * so we could find a POST WAIT reply easier in the reply handler. */ - writel(i2o_exec_driver.context, &msg->u.s.icntxt); + msg->u.s.icntxt = cpu_to_le32(i2o_exec_driver.context); wait->tcntxt = tcntxt++; - writel(wait->tcntxt, &msg->u.s.tcntxt); + msg->u.s.tcntxt = cpu_to_le32(wait->tcntxt); /* * Post the message to the controller. At some point later it will * return. If we time out before it returns then complete will be zero. */ - i2o_msg_post(c, m); + i2o_msg_post(c, msg); if (!wait->complete) { wait->wq = &wq; @@ -266,13 +263,14 @@ static int i2o_msg_post_wait_complete(struct i2o_controller *c, u32 m, * * Returns number of bytes printed into buffer. */ -static ssize_t i2o_exec_show_vendor_id(struct device *d, struct device_attribute *attr, char *buf) +static ssize_t i2o_exec_show_vendor_id(struct device *d, + struct device_attribute *attr, char *buf) { struct i2o_device *dev = to_i2o_device(d); u16 id; - if (i2o_parm_field_get(dev, 0x0000, 0, &id, 2)) { - sprintf(buf, "0x%04x", id); + if (!i2o_parm_field_get(dev, 0x0000, 0, &id, 2)) { + sprintf(buf, "0x%04x", le16_to_cpu(id)); return strlen(buf) + 1; } @@ -286,13 +284,15 @@ static ssize_t i2o_exec_show_vendor_id(struct device *d, struct device_attribute * * Returns number of bytes printed into buffer. */ -static ssize_t i2o_exec_show_product_id(struct device *d, struct device_attribute *attr, char *buf) +static ssize_t i2o_exec_show_product_id(struct device *d, + struct device_attribute *attr, + char *buf) { struct i2o_device *dev = to_i2o_device(d); u16 id; - if (i2o_parm_field_get(dev, 0x0000, 1, &id, 2)) { - sprintf(buf, "0x%04x", id); + if (!i2o_parm_field_get(dev, 0x0000, 1, &id, 2)) { + sprintf(buf, "0x%04x", le16_to_cpu(id)); return strlen(buf) + 1; } @@ -362,7 +362,9 @@ static void i2o_exec_lct_modified(struct i2o_controller *c) if (i2o_device_parse_lct(c) != -EAGAIN) change_ind = c->lct->change_ind + 1; +#ifdef CONFIG_I2O_LCT_NOTIFY_ON_CHANGES i2o_exec_lct_notify(c, change_ind); +#endif }; /** @@ -385,23 +387,22 @@ static int i2o_exec_reply(struct i2o_controller *c, u32 m, u32 context; if (le32_to_cpu(msg->u.head[0]) & MSG_FAIL) { + struct i2o_message __iomem *pmsg; + u32 pm; + /* * If Fail bit is set we must take the transaction context of * the preserved message to find the right request again. */ - struct i2o_message __iomem *pmsg; - u32 pm; pm = le32_to_cpu(msg->body[3]); - pmsg = i2o_msg_in_to_virt(c, pm); + context = readl(&pmsg->u.s.tcntxt); i2o_report_status(KERN_INFO, "i2o_core", msg); - context = readl(&pmsg->u.s.tcntxt); - /* Release the preserved msg */ - i2o_msg_nop(c, pm); + i2o_msg_nop_mfa(c, pm); } else context = le32_to_cpu(msg->u.s.tcntxt); @@ -462,25 +463,26 @@ static void i2o_exec_event(struct i2o_event *evt) */ int i2o_exec_lct_get(struct i2o_controller *c) { - struct i2o_message __iomem *msg; - u32 m; + struct i2o_message *msg; int i = 0; int rc = -EAGAIN; for (i = 1; i <= I2O_LCT_GET_TRIES; i++) { - m = i2o_msg_get_wait(c, &msg, I2O_TIMEOUT_MESSAGE_GET); - if (m == I2O_QUEUE_EMPTY) - return -ETIMEDOUT; - - writel(EIGHT_WORD_MSG_SIZE | SGL_OFFSET_6, &msg->u.head[0]); - writel(I2O_CMD_LCT_NOTIFY << 24 | HOST_TID << 12 | ADAPTER_TID, - &msg->u.head[1]); - writel(0xffffffff, &msg->body[0]); - writel(0x00000000, &msg->body[1]); - writel(0xd0000000 | c->dlct.len, &msg->body[2]); - writel(c->dlct.phys, &msg->body[3]); - - rc = i2o_msg_post_wait(c, m, I2O_TIMEOUT_LCT_GET); + msg = i2o_msg_get_wait(c, I2O_TIMEOUT_MESSAGE_GET); + if (IS_ERR(msg)) + return PTR_ERR(msg); + + msg->u.head[0] = + cpu_to_le32(EIGHT_WORD_MSG_SIZE | SGL_OFFSET_6); + msg->u.head[1] = + cpu_to_le32(I2O_CMD_LCT_NOTIFY << 24 | HOST_TID << 12 | + ADAPTER_TID); + msg->body[0] = cpu_to_le32(0xffffffff); + msg->body[1] = cpu_to_le32(0x00000000); + msg->body[2] = cpu_to_le32(0xd0000000 | c->dlct.len); + msg->body[3] = cpu_to_le32(c->dlct.phys); + + rc = i2o_msg_post_wait(c, msg, I2O_TIMEOUT_LCT_GET); if (rc < 0) break; @@ -506,29 +508,29 @@ static int i2o_exec_lct_notify(struct i2o_controller *c, u32 change_ind) { i2o_status_block *sb = c->status_block.virt; struct device *dev; - struct i2o_message __iomem *msg; - u32 m; + struct i2o_message *msg; dev = &c->pdev->dev; - if (i2o_dma_realloc(dev, &c->dlct, sb->expected_lct_size, GFP_KERNEL)) + if (i2o_dma_realloc + (dev, &c->dlct, le32_to_cpu(sb->expected_lct_size), GFP_KERNEL)) return -ENOMEM; - m = i2o_msg_get_wait(c, &msg, I2O_TIMEOUT_MESSAGE_GET); - if (m == I2O_QUEUE_EMPTY) - return -ETIMEDOUT; - - writel(EIGHT_WORD_MSG_SIZE | SGL_OFFSET_6, &msg->u.head[0]); - writel(I2O_CMD_LCT_NOTIFY << 24 | HOST_TID << 12 | ADAPTER_TID, - &msg->u.head[1]); - writel(i2o_exec_driver.context, &msg->u.s.icntxt); - writel(0, &msg->u.s.tcntxt); /* FIXME */ - writel(0xffffffff, &msg->body[0]); - writel(change_ind, &msg->body[1]); - writel(0xd0000000 | c->dlct.len, &msg->body[2]); - writel(c->dlct.phys, &msg->body[3]); - - i2o_msg_post(c, m); + msg = i2o_msg_get_wait(c, I2O_TIMEOUT_MESSAGE_GET); + if (IS_ERR(msg)) + return PTR_ERR(msg); + + msg->u.head[0] = cpu_to_le32(EIGHT_WORD_MSG_SIZE | SGL_OFFSET_6); + msg->u.head[1] = cpu_to_le32(I2O_CMD_LCT_NOTIFY << 24 | HOST_TID << 12 | + ADAPTER_TID); + msg->u.s.icntxt = cpu_to_le32(i2o_exec_driver.context); + msg->u.s.tcntxt = cpu_to_le32(0x00000000); + msg->body[0] = cpu_to_le32(0xffffffff); + msg->body[1] = cpu_to_le32(change_ind); + msg->body[2] = cpu_to_le32(0xd0000000 | c->dlct.len); + msg->body[3] = cpu_to_le32(c->dlct.phys); + + i2o_msg_post(c, msg); return 0; }; diff --git a/drivers/message/i2o/i2o_block.c b/drivers/message/i2o/i2o_block.c index f283b5bafdd..b09fb630715 100644 --- a/drivers/message/i2o/i2o_block.c +++ b/drivers/message/i2o/i2o_block.c @@ -59,10 +59,12 @@ #include <linux/blkdev.h> #include <linux/hdreg.h> +#include <scsi/scsi.h> + #include "i2o_block.h" #define OSM_NAME "block-osm" -#define OSM_VERSION "1.287" +#define OSM_VERSION "1.325" #define OSM_DESCRIPTION "I2O Block Device OSM" static struct i2o_driver i2o_block_driver; @@ -130,20 +132,20 @@ static int i2o_block_remove(struct device *dev) */ static int i2o_block_device_flush(struct i2o_device *dev) { - struct i2o_message __iomem *msg; - u32 m; + struct i2o_message *msg; - m = i2o_msg_get_wait(dev->iop, &msg, I2O_TIMEOUT_MESSAGE_GET); - if (m == I2O_QUEUE_EMPTY) - return -ETIMEDOUT; + msg = i2o_msg_get_wait(dev->iop, I2O_TIMEOUT_MESSAGE_GET); + if (IS_ERR(msg)) + return PTR_ERR(msg); - writel(FIVE_WORD_MSG_SIZE | SGL_OFFSET_0, &msg->u.head[0]); - writel(I2O_CMD_BLOCK_CFLUSH << 24 | HOST_TID << 12 | dev->lct_data.tid, - &msg->u.head[1]); - writel(60 << 16, &msg->body[0]); + msg->u.head[0] = cpu_to_le32(FIVE_WORD_MSG_SIZE | SGL_OFFSET_0); + msg->u.head[1] = + cpu_to_le32(I2O_CMD_BLOCK_CFLUSH << 24 | HOST_TID << 12 | dev-> + lct_data.tid); + msg->body[0] = cpu_to_le32(60 << 16); osm_debug("Flushing...\n"); - return i2o_msg_post_wait(dev->iop, m, 60); + return i2o_msg_post_wait(dev->iop, msg, 60); }; /** @@ -181,21 +183,21 @@ static int i2o_block_issue_flush(request_queue_t * queue, struct gendisk *disk, */ static int i2o_block_device_mount(struct i2o_device *dev, u32 media_id) { - struct i2o_message __iomem *msg; - u32 m; - - m = i2o_msg_get_wait(dev->iop, &msg, I2O_TIMEOUT_MESSAGE_GET); - if (m == I2O_QUEUE_EMPTY) - return -ETIMEDOUT; - - writel(FIVE_WORD_MSG_SIZE | SGL_OFFSET_0, &msg->u.head[0]); - writel(I2O_CMD_BLOCK_MMOUNT << 24 | HOST_TID << 12 | dev->lct_data.tid, - &msg->u.head[1]); - writel(-1, &msg->body[0]); - writel(0, &msg->body[1]); + struct i2o_message *msg; + + msg = i2o_msg_get_wait(dev->iop, I2O_TIMEOUT_MESSAGE_GET); + if (IS_ERR(msg)) + return PTR_ERR(msg); + + msg->u.head[0] = cpu_to_le32(FIVE_WORD_MSG_SIZE | SGL_OFFSET_0); + msg->u.head[1] = + cpu_to_le32(I2O_CMD_BLOCK_MMOUNT << 24 | HOST_TID << 12 | dev-> + lct_data.tid); + msg->body[0] = cpu_to_le32(-1); + msg->body[1] = cpu_to_le32(0x00000000); osm_debug("Mounting...\n"); - return i2o_msg_post_wait(dev->iop, m, 2); + return i2o_msg_post_wait(dev->iop, msg, 2); }; /** @@ -210,20 +212,20 @@ static int i2o_block_device_mount(struct i2o_device *dev, u32 media_id) */ static int i2o_block_device_lock(struct i2o_device *dev, u32 media_id) { - struct i2o_message __iomem *msg; - u32 m; + struct i2o_message *msg; - m = i2o_msg_get_wait(dev->iop, &msg, I2O_TIMEOUT_MESSAGE_GET); - if (m == I2O_QUEUE_EMPTY) - return -ETIMEDOUT; + msg = i2o_msg_get_wait(dev->iop, I2O_TIMEOUT_MESSAGE_GET); + if (IS_ERR(msg) == I2O_QUEUE_EMPTY) + return PTR_ERR(msg); - writel(FIVE_WORD_MSG_SIZE | SGL_OFFSET_0, &msg->u.head[0]); - writel(I2O_CMD_BLOCK_MLOCK << 24 | HOST_TID << 12 | dev->lct_data.tid, - &msg->u.head[1]); - writel(-1, &msg->body[0]); + msg->u.head[0] = cpu_to_le32(FIVE_WORD_MSG_SIZE | SGL_OFFSET_0); + msg->u.head[1] = + cpu_to_le32(I2O_CMD_BLOCK_MLOCK << 24 | HOST_TID << 12 | dev-> + lct_data.tid); + msg->body[0] = cpu_to_le32(-1); osm_debug("Locking...\n"); - return i2o_msg_post_wait(dev->iop, m, 2); + return i2o_msg_post_wait(dev->iop, msg, 2); }; /** @@ -238,20 +240,20 @@ static int i2o_block_device_lock(struct i2o_device *dev, u32 media_id) */ static int i2o_block_device_unlock(struct i2o_device *dev, u32 media_id) { - struct i2o_message __iomem *msg; - u32 m; + struct i2o_message *msg; - m = i2o_msg_get_wait(dev->iop, &msg, I2O_TIMEOUT_MESSAGE_GET); - if (m == I2O_QUEUE_EMPTY) - return -ETIMEDOUT; + msg = i2o_msg_get_wait(dev->iop, I2O_TIMEOUT_MESSAGE_GET); + if (IS_ERR(msg)) + return PTR_ERR(msg); - writel(FIVE_WORD_MSG_SIZE | SGL_OFFSET_0, &msg->u.head[0]); - writel(I2O_CMD_BLOCK_MUNLOCK << 24 | HOST_TID << 12 | dev->lct_data.tid, - &msg->u.head[1]); - writel(media_id, &msg->body[0]); + msg->u.head[0] = cpu_to_le32(FIVE_WORD_MSG_SIZE | SGL_OFFSET_0); + msg->u.head[1] = + cpu_to_le32(I2O_CMD_BLOCK_MUNLOCK << 24 | HOST_TID << 12 | dev-> + lct_data.tid); + msg->body[0] = cpu_to_le32(media_id); osm_debug("Unlocking...\n"); - return i2o_msg_post_wait(dev->iop, m, 2); + return i2o_msg_post_wait(dev->iop, msg, 2); }; /** @@ -267,21 +269,21 @@ static int i2o_block_device_power(struct i2o_block_device *dev, u8 op) { struct i2o_device *i2o_dev = dev->i2o_dev; struct i2o_controller *c = i2o_dev->iop; - struct i2o_message __iomem *msg; - u32 m; + struct i2o_message *msg; int rc; - m = i2o_msg_get_wait(c, &msg, I2O_TIMEOUT_MESSAGE_GET); - if (m == I2O_QUEUE_EMPTY) - return -ETIMEDOUT; + msg = i2o_msg_get_wait(c, I2O_TIMEOUT_MESSAGE_GET); + if (IS_ERR(msg)) + return PTR_ERR(msg); - writel(FOUR_WORD_MSG_SIZE | SGL_OFFSET_0, &msg->u.head[0]); - writel(I2O_CMD_BLOCK_POWER << 24 | HOST_TID << 12 | i2o_dev->lct_data. - tid, &msg->u.head[1]); - writel(op << 24, &msg->body[0]); + msg->u.head[0] = cpu_to_le32(FOUR_WORD_MSG_SIZE | SGL_OFFSET_0); + msg->u.head[1] = + cpu_to_le32(I2O_CMD_BLOCK_POWER << 24 | HOST_TID << 12 | i2o_dev-> + lct_data.tid); + msg->body[0] = cpu_to_le32(op << 24); osm_debug("Power...\n"); - rc = i2o_msg_post_wait(c, m, 60); + rc = i2o_msg_post_wait(c, msg, 60); if (!rc) dev->power = op; @@ -331,7 +333,7 @@ static inline void i2o_block_request_free(struct i2o_block_request *ireq) */ static inline int i2o_block_sglist_alloc(struct i2o_controller *c, struct i2o_block_request *ireq, - u32 __iomem ** mptr) + u32 ** mptr) { int nents; enum dma_data_direction direction; @@ -466,7 +468,7 @@ static void i2o_block_end_request(struct request *req, int uptodate, spin_lock_irqsave(q->queue_lock, flags); - end_that_request_last(req); + end_that_request_last(req, uptodate); if (likely(dev)) { dev->open_queue_depth--; @@ -660,6 +662,13 @@ static int i2o_block_release(struct inode *inode, struct file *file) return 0; } +static int i2o_block_getgeo(struct block_device *bdev, struct hd_geometry *geo) +{ + i2o_block_biosparam(get_capacity(bdev->bd_disk), + &geo->cylinders, &geo->heads, &geo->sectors); + return 0; +} + /** * i2o_block_ioctl - Issue device specific ioctl calls. * @cmd: ioctl command @@ -674,7 +683,6 @@ static int i2o_block_ioctl(struct inode *inode, struct file *file, { struct gendisk *disk = inode->i_bdev->bd_disk; struct i2o_block_device *dev = disk->private_data; - void __user *argp = (void __user *)arg; /* Anyone capable of this syscall can do *real bad* things */ @@ -682,15 +690,6 @@ static int i2o_block_ioctl(struct inode *inode, struct file *file, return -EPERM; switch (cmd) { - case HDIO_GETGEO: - { - struct hd_geometry g; - i2o_block_biosparam(get_capacity(disk), - &g.cylinders, &g.heads, &g.sectors); - g.start = get_start_sect(inode->i_bdev); - return copy_to_user(argp, &g, sizeof(g)) ? -EFAULT : 0; - } - case BLKI2OGRSTRAT: return put_user(dev->rcache, (int __user *)arg); case BLKI2OGWSTRAT: @@ -745,10 +744,9 @@ static int i2o_block_transfer(struct request *req) struct i2o_block_device *dev = req->rq_disk->private_data; struct i2o_controller *c; int tid = dev->i2o_dev->lct_data.tid; - struct i2o_message __iomem *msg; - u32 __iomem *mptr; + struct i2o_message *msg; + u32 *mptr; struct i2o_block_request *ireq = req->special; - u32 m; u32 tcntxt; u32 sgl_offset = SGL_OFFSET_8; u32 ctl_flags = 0x00000000; @@ -763,9 +761,9 @@ static int i2o_block_transfer(struct request *req) c = dev->i2o_dev->iop; - m = i2o_msg_get(c, &msg); - if (m == I2O_QUEUE_EMPTY) { - rc = -EBUSY; + msg = i2o_msg_get(c); + if (IS_ERR(msg)) { + rc = PTR_ERR(msg); goto exit; } @@ -775,8 +773,8 @@ static int i2o_block_transfer(struct request *req) goto nop_msg; } - writel(i2o_block_driver.context, &msg->u.s.icntxt); - writel(tcntxt, &msg->u.s.tcntxt); + msg->u.s.icntxt = cpu_to_le32(i2o_block_driver.context); + msg->u.s.tcntxt = cpu_to_le32(tcntxt); mptr = &msg->body[0]; @@ -834,11 +832,11 @@ static int i2o_block_transfer(struct request *req) sgl_offset = SGL_OFFSET_12; - writel(I2O_CMD_PRIVATE << 24 | HOST_TID << 12 | tid, - &msg->u.head[1]); + msg->u.head[1] = + cpu_to_le32(I2O_CMD_PRIVATE << 24 | HOST_TID << 12 | tid); - writel(I2O_VENDOR_DPT << 16 | I2O_CMD_SCSI_EXEC, mptr++); - writel(tid, mptr++); + *mptr++ = cpu_to_le32(I2O_VENDOR_DPT << 16 | I2O_CMD_SCSI_EXEC); + *mptr++ = cpu_to_le32(tid); /* * ENABLE_DISCONNECT @@ -846,29 +844,31 @@ static int i2o_block_transfer(struct request *req) * RETURN_SENSE_DATA_IN_REPLY_MESSAGE_FRAME */ if (rq_data_dir(req) == READ) { - cmd[0] = 0x28; + cmd[0] = READ_10; scsi_flags = 0x60a0000a; } else { - cmd[0] = 0x2A; + cmd[0] = WRITE_10; scsi_flags = 0xa0a0000a; } - writel(scsi_flags, mptr++); + *mptr++ = cpu_to_le32(scsi_flags); *((u32 *) & cmd[2]) = cpu_to_be32(req->sector * hwsec); *((u16 *) & cmd[7]) = cpu_to_be16(req->nr_sectors * hwsec); - memcpy_toio(mptr, cmd, 10); + memcpy(mptr, cmd, 10); mptr += 4; - writel(req->nr_sectors << KERNEL_SECTOR_SHIFT, mptr++); + *mptr++ = cpu_to_le32(req->nr_sectors << KERNEL_SECTOR_SHIFT); } else #endif { - writel(cmd | HOST_TID << 12 | tid, &msg->u.head[1]); - writel(ctl_flags, mptr++); - writel(req->nr_sectors << KERNEL_SECTOR_SHIFT, mptr++); - writel((u32) (req->sector << KERNEL_SECTOR_SHIFT), mptr++); - writel(req->sector >> (32 - KERNEL_SECTOR_SHIFT), mptr++); + msg->u.head[1] = cpu_to_le32(cmd | HOST_TID << 12 | tid); + *mptr++ = cpu_to_le32(ctl_flags); + *mptr++ = cpu_to_le32(req->nr_sectors << KERNEL_SECTOR_SHIFT); + *mptr++ = + cpu_to_le32((u32) (req->sector << KERNEL_SECTOR_SHIFT)); + *mptr++ = + cpu_to_le32(req->sector >> (32 - KERNEL_SECTOR_SHIFT)); } if (!i2o_block_sglist_alloc(c, ireq, &mptr)) { @@ -876,13 +876,13 @@ static int i2o_block_transfer(struct request *req) goto context_remove; } - writel(I2O_MESSAGE_SIZE(mptr - &msg->u.head[0]) | - sgl_offset, &msg->u.head[0]); + msg->u.head[0] = + cpu_to_le32(I2O_MESSAGE_SIZE(mptr - &msg->u.head[0]) | sgl_offset); list_add_tail(&ireq->queue, &dev->open_queue); dev->open_queue_depth++; - i2o_msg_post(c, m); + i2o_msg_post(c, msg); return 0; @@ -890,7 +890,7 @@ static int i2o_block_transfer(struct request *req) i2o_cntxt_list_remove(c, req); nop_msg: - i2o_msg_nop(c, m); + i2o_msg_nop(c, msg); exit: return rc; @@ -959,6 +959,7 @@ static struct block_device_operations i2o_block_fops = { .open = i2o_block_open, .release = i2o_block_release, .ioctl = i2o_block_ioctl, + .getgeo = i2o_block_getgeo, .media_changed = i2o_block_media_changed }; @@ -978,13 +979,12 @@ static struct i2o_block_device *i2o_block_device_alloc(void) struct request_queue *queue; int rc; - dev = kmalloc(sizeof(*dev), GFP_KERNEL); + dev = kzalloc(sizeof(*dev), GFP_KERNEL); if (!dev) { osm_err("Insufficient memory to allocate I2O Block disk.\n"); rc = -ENOMEM; goto exit; } - memset(dev, 0, sizeof(*dev)); INIT_LIST_HEAD(&dev->open_queue); spin_lock_init(&dev->lock); @@ -1049,8 +1049,8 @@ static int i2o_block_probe(struct device *dev) int rc; u64 size; u32 blocksize; - u32 flags, status; u16 body_size = 4; + u16 power; unsigned short max_sectors; #ifdef CONFIG_I2O_EXT_ADAPTEC @@ -1108,22 +1108,20 @@ static int i2o_block_probe(struct device *dev) * Ask for the current media data. If that isn't supported * then we ask for the device capacity data */ - if (i2o_parm_field_get(i2o_dev, 0x0004, 1, &blocksize, 4) || - i2o_parm_field_get(i2o_dev, 0x0000, 3, &blocksize, 4)) { - blk_queue_hardsect_size(queue, blocksize); + if (!i2o_parm_field_get(i2o_dev, 0x0004, 1, &blocksize, 4) || + !i2o_parm_field_get(i2o_dev, 0x0000, 3, &blocksize, 4)) { + blk_queue_hardsect_size(queue, le32_to_cpu(blocksize)); } else osm_warn("unable to get blocksize of %s\n", gd->disk_name); - if (i2o_parm_field_get(i2o_dev, 0x0004, 0, &size, 8) || - i2o_parm_field_get(i2o_dev, 0x0000, 4, &size, 8)) { - set_capacity(gd, size >> KERNEL_SECTOR_SHIFT); + if (!i2o_parm_field_get(i2o_dev, 0x0004, 0, &size, 8) || + !i2o_parm_field_get(i2o_dev, 0x0000, 4, &size, 8)) { + set_capacity(gd, le64_to_cpu(size) >> KERNEL_SECTOR_SHIFT); } else osm_warn("could not get size of %s\n", gd->disk_name); - if (!i2o_parm_field_get(i2o_dev, 0x0000, 2, &i2o_blk_dev->power, 2)) - i2o_blk_dev->power = 0; - i2o_parm_field_get(i2o_dev, 0x0000, 5, &flags, 4); - i2o_parm_field_get(i2o_dev, 0x0000, 6, &status, 4); + if (!i2o_parm_field_get(i2o_dev, 0x0000, 2, &power, 2)) + i2o_blk_dev->power = power; i2o_event_register(i2o_dev, &i2o_block_driver, 0, 0xffffffff); diff --git a/drivers/message/i2o/i2o_config.c b/drivers/message/i2o/i2o_config.c index 3c3a7abebb1..89daf67b764 100644 --- a/drivers/message/i2o/i2o_config.c +++ b/drivers/message/i2o/i2o_config.c @@ -36,12 +36,12 @@ #include <asm/uaccess.h> -#include "core.h" - #define SG_TABLESIZE 30 -static int i2o_cfg_ioctl(struct inode *inode, struct file *fp, unsigned int cmd, - unsigned long arg); +extern int i2o_parm_issue(struct i2o_device *, int, void *, int, void *, int); + +static int i2o_cfg_ioctl(struct inode *, struct file *, unsigned int, + unsigned long); static spinlock_t i2o_config_lock; @@ -230,8 +230,7 @@ static int i2o_cfg_swdl(unsigned long arg) struct i2o_sw_xfer __user *pxfer = (struct i2o_sw_xfer __user *)arg; unsigned char maxfrag = 0, curfrag = 1; struct i2o_dma buffer; - struct i2o_message __iomem *msg; - u32 m; + struct i2o_message *msg; unsigned int status = 0, swlen = 0, fragsize = 8192; struct i2o_controller *c; @@ -257,31 +256,34 @@ static int i2o_cfg_swdl(unsigned long arg) if (!c) return -ENXIO; - m = i2o_msg_get_wait(c, &msg, I2O_TIMEOUT_MESSAGE_GET); - if (m == I2O_QUEUE_EMPTY) - return -EBUSY; + msg = i2o_msg_get_wait(c, I2O_TIMEOUT_MESSAGE_GET); + if (IS_ERR(msg)) + return PTR_ERR(msg); if (i2o_dma_alloc(&c->pdev->dev, &buffer, fragsize, GFP_KERNEL)) { - i2o_msg_nop(c, m); + i2o_msg_nop(c, msg); return -ENOMEM; } __copy_from_user(buffer.virt, kxfer.buf, fragsize); - writel(NINE_WORD_MSG_SIZE | SGL_OFFSET_7, &msg->u.head[0]); - writel(I2O_CMD_SW_DOWNLOAD << 24 | HOST_TID << 12 | ADAPTER_TID, - &msg->u.head[1]); - writel(i2o_config_driver.context, &msg->u.head[2]); - writel(0, &msg->u.head[3]); - writel((((u32) kxfer.flags) << 24) | (((u32) kxfer.sw_type) << 16) | - (((u32) maxfrag) << 8) | (((u32) curfrag)), &msg->body[0]); - writel(swlen, &msg->body[1]); - writel(kxfer.sw_id, &msg->body[2]); - writel(0xD0000000 | fragsize, &msg->body[3]); - writel(buffer.phys, &msg->body[4]); + msg->u.head[0] = cpu_to_le32(NINE_WORD_MSG_SIZE | SGL_OFFSET_7); + msg->u.head[1] = + cpu_to_le32(I2O_CMD_SW_DOWNLOAD << 24 | HOST_TID << 12 | + ADAPTER_TID); + msg->u.head[2] = cpu_to_le32(i2o_config_driver.context); + msg->u.head[3] = cpu_to_le32(0); + msg->body[0] = + cpu_to_le32((((u32) kxfer.flags) << 24) | (((u32) kxfer. + sw_type) << 16) | + (((u32) maxfrag) << 8) | (((u32) curfrag))); + msg->body[1] = cpu_to_le32(swlen); + msg->body[2] = cpu_to_le32(kxfer.sw_id); + msg->body[3] = cpu_to_le32(0xD0000000 | fragsize); + msg->body[4] = cpu_to_le32(buffer.phys); osm_debug("swdl frag %d/%d (size %d)\n", curfrag, maxfrag, fragsize); - status = i2o_msg_post_wait_mem(c, m, 60, &buffer); + status = i2o_msg_post_wait_mem(c, msg, 60, &buffer); if (status != -ETIMEDOUT) i2o_dma_free(&c->pdev->dev, &buffer); @@ -302,8 +304,7 @@ static int i2o_cfg_swul(unsigned long arg) struct i2o_sw_xfer __user *pxfer = (struct i2o_sw_xfer __user *)arg; unsigned char maxfrag = 0, curfrag = 1; struct i2o_dma buffer; - struct i2o_message __iomem *msg; - u32 m; + struct i2o_message *msg; unsigned int status = 0, swlen = 0, fragsize = 8192; struct i2o_controller *c; int ret = 0; @@ -330,30 +331,30 @@ static int i2o_cfg_swul(unsigned long arg) if (!c) return -ENXIO; - m = i2o_msg_get_wait(c, &msg, I2O_TIMEOUT_MESSAGE_GET); - if (m == I2O_QUEUE_EMPTY) - return -EBUSY; + msg = i2o_msg_get_wait(c, I2O_TIMEOUT_MESSAGE_GET); + if (IS_ERR(msg)) + return PTR_ERR(msg); if (i2o_dma_alloc(&c->pdev->dev, &buffer, fragsize, GFP_KERNEL)) { - i2o_msg_nop(c, m); + i2o_msg_nop(c, msg); return -ENOMEM; } - writel(NINE_WORD_MSG_SIZE | SGL_OFFSET_7, &msg->u.head[0]); - writel(I2O_CMD_SW_UPLOAD << 24 | HOST_TID << 12 | ADAPTER_TID, - &msg->u.head[1]); - writel(i2o_config_driver.context, &msg->u.head[2]); - writel(0, &msg->u.head[3]); - writel((u32) kxfer.flags << 24 | (u32) kxfer. - sw_type << 16 | (u32) maxfrag << 8 | (u32) curfrag, - &msg->body[0]); - writel(swlen, &msg->body[1]); - writel(kxfer.sw_id, &msg->body[2]); - writel(0xD0000000 | fragsize, &msg->body[3]); - writel(buffer.phys, &msg->body[4]); + msg->u.head[0] = cpu_to_le32(NINE_WORD_MSG_SIZE | SGL_OFFSET_7); + msg->u.head[1] = + cpu_to_le32(I2O_CMD_SW_UPLOAD << 24 | HOST_TID << 12 | ADAPTER_TID); + msg->u.head[2] = cpu_to_le32(i2o_config_driver.context); + msg->u.head[3] = cpu_to_le32(0); + msg->body[0] = + cpu_to_le32((u32) kxfer.flags << 24 | (u32) kxfer. + sw_type << 16 | (u32) maxfrag << 8 | (u32) curfrag); + msg->body[1] = cpu_to_le32(swlen); + msg->body[2] = cpu_to_le32(kxfer.sw_id); + msg->body[3] = cpu_to_le32(0xD0000000 | fragsize); + msg->body[4] = cpu_to_le32(buffer.phys); osm_debug("swul frag %d/%d (size %d)\n", curfrag, maxfrag, fragsize); - status = i2o_msg_post_wait_mem(c, m, 60, &buffer); + status = i2o_msg_post_wait_mem(c, msg, 60, &buffer); if (status != I2O_POST_WAIT_OK) { if (status != -ETIMEDOUT) @@ -380,8 +381,7 @@ static int i2o_cfg_swdel(unsigned long arg) struct i2o_controller *c; struct i2o_sw_xfer kxfer; struct i2o_sw_xfer __user *pxfer = (struct i2o_sw_xfer __user *)arg; - struct i2o_message __iomem *msg; - u32 m; + struct i2o_message *msg; unsigned int swlen; int token; @@ -395,21 +395,21 @@ static int i2o_cfg_swdel(unsigned long arg) if (!c) return -ENXIO; - m = i2o_msg_get_wait(c, &msg, I2O_TIMEOUT_MESSAGE_GET); - if (m == I2O_QUEUE_EMPTY) - return -EBUSY; + msg = i2o_msg_get_wait(c, I2O_TIMEOUT_MESSAGE_GET); + if (IS_ERR(msg)) + return PTR_ERR(msg); - writel(SEVEN_WORD_MSG_SIZE | SGL_OFFSET_0, &msg->u.head[0]); - writel(I2O_CMD_SW_REMOVE << 24 | HOST_TID << 12 | ADAPTER_TID, - &msg->u.head[1]); - writel(i2o_config_driver.context, &msg->u.head[2]); - writel(0, &msg->u.head[3]); - writel((u32) kxfer.flags << 24 | (u32) kxfer.sw_type << 16, - &msg->body[0]); - writel(swlen, &msg->body[1]); - writel(kxfer.sw_id, &msg->body[2]); + msg->u.head[0] = cpu_to_le32(SEVEN_WORD_MSG_SIZE | SGL_OFFSET_0); + msg->u.head[1] = + cpu_to_le32(I2O_CMD_SW_REMOVE << 24 | HOST_TID << 12 | ADAPTER_TID); + msg->u.head[2] = cpu_to_le32(i2o_config_driver.context); + msg->u.head[3] = cpu_to_le32(0); + msg->body[0] = + cpu_to_le32((u32) kxfer.flags << 24 | (u32) kxfer.sw_type << 16); + msg->body[1] = cpu_to_le32(swlen); + msg->body[2] = cpu_to_le32(kxfer.sw_id); - token = i2o_msg_post_wait(c, m, 10); + token = i2o_msg_post_wait(c, msg, 10); if (token != I2O_POST_WAIT_OK) { osm_info("swdel failed, DetailedStatus = %d\n", token); @@ -423,25 +423,24 @@ static int i2o_cfg_validate(unsigned long arg) { int token; int iop = (int)arg; - struct i2o_message __iomem *msg; - u32 m; + struct i2o_message *msg; struct i2o_controller *c; c = i2o_find_iop(iop); if (!c) return -ENXIO; - m = i2o_msg_get_wait(c, &msg, I2O_TIMEOUT_MESSAGE_GET); - if (m == I2O_QUEUE_EMPTY) - return -EBUSY; + msg = i2o_msg_get_wait(c, I2O_TIMEOUT_MESSAGE_GET); + if (IS_ERR(msg)) + return PTR_ERR(msg); - writel(FOUR_WORD_MSG_SIZE | SGL_OFFSET_0, &msg->u.head[0]); - writel(I2O_CMD_CONFIG_VALIDATE << 24 | HOST_TID << 12 | iop, - &msg->u.head[1]); - writel(i2o_config_driver.context, &msg->u.head[2]); - writel(0, &msg->u.head[3]); + msg->u.head[0] = cpu_to_le32(FOUR_WORD_MSG_SIZE | SGL_OFFSET_0); + msg->u.head[1] = + cpu_to_le32(I2O_CMD_CONFIG_VALIDATE << 24 | HOST_TID << 12 | iop); + msg->u.head[2] = cpu_to_le32(i2o_config_driver.context); + msg->u.head[3] = cpu_to_le32(0); - token = i2o_msg_post_wait(c, m, 10); + token = i2o_msg_post_wait(c, msg, 10); if (token != I2O_POST_WAIT_OK) { osm_info("Can't validate configuration, ErrorStatus = %d\n", @@ -454,8 +453,7 @@ static int i2o_cfg_validate(unsigned long arg) static int i2o_cfg_evt_reg(unsigned long arg, struct file *fp) { - struct i2o_message __iomem *msg; - u32 m; + struct i2o_message *msg; struct i2o_evt_id __user *pdesc = (struct i2o_evt_id __user *)arg; struct i2o_evt_id kdesc; struct i2o_controller *c; @@ -474,18 +472,19 @@ static int i2o_cfg_evt_reg(unsigned long arg, struct file *fp) if (!d) return -ENODEV; - m = i2o_msg_get_wait(c, &msg, I2O_TIMEOUT_MESSAGE_GET); - if (m == I2O_QUEUE_EMPTY) - return -EBUSY; + msg = i2o_msg_get_wait(c, I2O_TIMEOUT_MESSAGE_GET); + if (IS_ERR(msg)) + return PTR_ERR(msg); - writel(FOUR_WORD_MSG_SIZE | SGL_OFFSET_0, &msg->u.head[0]); - writel(I2O_CMD_UTIL_EVT_REGISTER << 24 | HOST_TID << 12 | kdesc.tid, - &msg->u.head[1]); - writel(i2o_config_driver.context, &msg->u.head[2]); - writel(i2o_cntxt_list_add(c, fp->private_data), &msg->u.head[3]); - writel(kdesc.evt_mask, &msg->body[0]); + msg->u.head[0] = cpu_to_le32(FOUR_WORD_MSG_SIZE | SGL_OFFSET_0); + msg->u.head[1] = + cpu_to_le32(I2O_CMD_UTIL_EVT_REGISTER << 24 | HOST_TID << 12 | + kdesc.tid); + msg->u.head[2] = cpu_to_le32(i2o_config_driver.context); + msg->u.head[3] = cpu_to_le32(i2o_cntxt_list_add(c, fp->private_data)); + msg->body[0] = cpu_to_le32(kdesc.evt_mask); - i2o_msg_post(c, m); + i2o_msg_post(c, msg); return 0; } @@ -537,7 +536,6 @@ static int i2o_cfg_passthru32(struct file *file, unsigned cmnd, u32 sg_index = 0; i2o_status_block *sb; struct i2o_message *msg; - u32 m; unsigned int iop; cmd = (struct i2o_cmd_passthru32 __user *)arg; @@ -553,7 +551,7 @@ static int i2o_cfg_passthru32(struct file *file, unsigned cmnd, return -ENXIO; } - m = i2o_msg_get_wait(c, &msg, I2O_TIMEOUT_MESSAGE_GET); + msg = i2o_msg_get_wait(c, I2O_TIMEOUT_MESSAGE_GET); sb = c->status_block.virt; @@ -585,19 +583,15 @@ static int i2o_cfg_passthru32(struct file *file, unsigned cmnd, reply_size >>= 16; reply_size <<= 2; - reply = kmalloc(reply_size, GFP_KERNEL); + reply = kzalloc(reply_size, GFP_KERNEL); if (!reply) { printk(KERN_WARNING "%s: Could not allocate reply buffer\n", c->name); return -ENOMEM; } - memset(reply, 0, reply_size); sg_offset = (msg->u.head[0] >> 4) & 0x0f; - writel(i2o_config_driver.context, &msg->u.s.icntxt); - writel(i2o_cntxt_list_add(c, reply), &msg->u.s.tcntxt); - memset(sg_list, 0, sizeof(sg_list[0]) * SG_TABLESIZE); if (sg_offset) { struct sg_simple_element *sg; @@ -631,7 +625,7 @@ static int i2o_cfg_passthru32(struct file *file, unsigned cmnd, goto cleanup; } sg_size = sg[i].flag_count & 0xffffff; - p = &(sg_list[sg_index++]); + p = &(sg_list[sg_index]); /* Allocate memory for the transfer */ if (i2o_dma_alloc (&c->pdev->dev, p, sg_size, @@ -642,6 +636,7 @@ static int i2o_cfg_passthru32(struct file *file, unsigned cmnd, rcode = -ENOMEM; goto sg_list_cleanup; } + sg_index++; /* Copy in the user's SG buffer if necessary */ if (sg[i]. flag_count & 0x04000000 /*I2O_SGL_FLAGS_DIR */ ) { @@ -662,9 +657,11 @@ static int i2o_cfg_passthru32(struct file *file, unsigned cmnd, } } - rcode = i2o_msg_post_wait(c, m, 60); - if (rcode) + rcode = i2o_msg_post_wait(c, msg, 60); + if (rcode) { + reply[4] = ((u32) rcode) << 24; goto sg_list_cleanup; + } if (sg_offset) { u32 msg[I2O_OUTBOUND_MSG_FRAME_SIZE]; @@ -714,6 +711,7 @@ static int i2o_cfg_passthru32(struct file *file, unsigned cmnd, } } + sg_list_cleanup: /* Copy back the reply to user space */ if (reply_size) { // we wrote our own values for context - now restore the user supplied ones @@ -731,7 +729,6 @@ static int i2o_cfg_passthru32(struct file *file, unsigned cmnd, } } - sg_list_cleanup: for (i = 0; i < sg_index; i++) i2o_dma_free(&c->pdev->dev, &sg_list[i]); @@ -780,8 +777,7 @@ static int i2o_cfg_passthru(unsigned long arg) u32 i = 0; void *p = NULL; i2o_status_block *sb; - struct i2o_message __iomem *msg; - u32 m; + struct i2o_message *msg; unsigned int iop; if (get_user(iop, &cmd->iop) || get_user(user_msg, &cmd->msg)) @@ -793,7 +789,7 @@ static int i2o_cfg_passthru(unsigned long arg) return -ENXIO; } - m = i2o_msg_get_wait(c, &msg, I2O_TIMEOUT_MESSAGE_GET); + msg = i2o_msg_get_wait(c, I2O_TIMEOUT_MESSAGE_GET); sb = c->status_block.virt; @@ -820,19 +816,15 @@ static int i2o_cfg_passthru(unsigned long arg) reply_size >>= 16; reply_size <<= 2; - reply = kmalloc(reply_size, GFP_KERNEL); + reply = kzalloc(reply_size, GFP_KERNEL); if (!reply) { printk(KERN_WARNING "%s: Could not allocate reply buffer\n", c->name); return -ENOMEM; } - memset(reply, 0, reply_size); sg_offset = (msg->u.head[0] >> 4) & 0x0f; - writel(i2o_config_driver.context, &msg->u.s.icntxt); - writel(i2o_cntxt_list_add(c, reply), &msg->u.s.tcntxt); - memset(sg_list, 0, sizeof(sg_list[0]) * SG_TABLESIZE); if (sg_offset) { struct sg_simple_element *sg; @@ -894,9 +886,11 @@ static int i2o_cfg_passthru(unsigned long arg) } } - rcode = i2o_msg_post_wait(c, m, 60); - if (rcode) + rcode = i2o_msg_post_wait(c, msg, 60); + if (rcode) { + reply[4] = ((u32) rcode) << 24; goto sg_list_cleanup; + } if (sg_offset) { u32 msg[128]; @@ -946,6 +940,7 @@ static int i2o_cfg_passthru(unsigned long arg) } } + sg_list_cleanup: /* Copy back the reply to user space */ if (reply_size) { // we wrote our own values for context - now restore the user supplied ones @@ -962,7 +957,6 @@ static int i2o_cfg_passthru(unsigned long arg) } } - sg_list_cleanup: for (i = 0; i < sg_index; i++) kfree(sg_list[i]); diff --git a/drivers/message/i2o/i2o_lan.h b/drivers/message/i2o/i2o_lan.h index 561d63304d7..6502b817df5 100644 --- a/drivers/message/i2o/i2o_lan.h +++ b/drivers/message/i2o/i2o_lan.h @@ -103,14 +103,14 @@ #define I2O_LAN_DSC_SUSPENDED 0x11 struct i2o_packet_info { - u32 offset : 24; - u32 flags : 8; - u32 len : 24; - u32 status : 8; + u32 offset:24; + u32 flags:8; + u32 len:24; + u32 status:8; }; struct i2o_bucket_descriptor { - u32 context; /* FIXME: 64bit support */ + u32 context; /* FIXME: 64bit support */ struct i2o_packet_info packet_info[1]; }; @@ -127,14 +127,14 @@ struct i2o_lan_local { u8 unit; struct i2o_device *i2o_dev; - struct fddi_statistics stats; /* see also struct net_device_stats */ - unsigned short (*type_trans)(struct sk_buff *, struct net_device *); - atomic_t buckets_out; /* nbr of unused buckets on DDM */ - atomic_t tx_out; /* outstanding TXes */ - u8 tx_count; /* packets in one TX message frame */ - u16 tx_max_out; /* DDM's Tx queue len */ - u8 sgl_max; /* max SGLs in one message frame */ - u32 m; /* IOP address of the batch msg frame */ + struct fddi_statistics stats; /* see also struct net_device_stats */ + unsigned short (*type_trans) (struct sk_buff *, struct net_device *); + atomic_t buckets_out; /* nbr of unused buckets on DDM */ + atomic_t tx_out; /* outstanding TXes */ + u8 tx_count; /* packets in one TX message frame */ + u16 tx_max_out; /* DDM's Tx queue len */ + u8 sgl_max; /* max SGLs in one message frame */ + u32 m; /* IOP address of the batch msg frame */ struct work_struct i2o_batch_send_task; int send_active; @@ -144,16 +144,16 @@ struct i2o_lan_local { spinlock_t tx_lock; - u32 max_size_mc_table; /* max number of multicast addresses */ + u32 max_size_mc_table; /* max number of multicast addresses */ /* LAN OSM configurable parameters are here: */ - u16 max_buckets_out; /* max nbr of buckets to send to DDM */ - u16 bucket_thresh; /* send more when this many used */ + u16 max_buckets_out; /* max nbr of buckets to send to DDM */ + u16 bucket_thresh; /* send more when this many used */ u16 rx_copybreak; - u8 tx_batch_mode; /* Set when using batch mode sends */ - u32 i2o_event_mask; /* To turn on interesting event flags */ + u8 tx_batch_mode; /* Set when using batch mode sends */ + u32 i2o_event_mask; /* To turn on interesting event flags */ }; -#endif /* _I2O_LAN_H */ +#endif /* _I2O_LAN_H */ diff --git a/drivers/message/i2o/i2o_proc.c b/drivers/message/i2o/i2o_proc.c index d559a175836..2a0c42b8cda 100644 --- a/drivers/message/i2o/i2o_proc.c +++ b/drivers/message/i2o/i2o_proc.c @@ -28,7 +28,7 @@ */ #define OSM_NAME "proc-osm" -#define OSM_VERSION "1.145" +#define OSM_VERSION "1.316" #define OSM_DESCRIPTION "I2O ProcFS OSM" #define I2O_MAX_MODULES 4 diff --git a/drivers/message/i2o/i2o_scsi.c b/drivers/message/i2o/i2o_scsi.c index 9f1744c3933..f9e5a23697a 100644 --- a/drivers/message/i2o/i2o_scsi.c +++ b/drivers/message/i2o/i2o_scsi.c @@ -70,7 +70,7 @@ #include <scsi/sg_request.h> #define OSM_NAME "scsi-osm" -#define OSM_VERSION "1.282" +#define OSM_VERSION "1.316" #define OSM_DESCRIPTION "I2O SCSI Peripheral OSM" static struct i2o_driver i2o_scsi_driver; @@ -113,7 +113,7 @@ static struct i2o_scsi_host *i2o_scsi_host_alloc(struct i2o_controller *c) list_for_each_entry(i2o_dev, &c->devices, list) if (i2o_dev->lct_data.class_id == I2O_CLASS_BUS_ADAPTER) { - if (i2o_parm_field_get(i2o_dev, 0x0000, 0, &type, 1) + if (!i2o_parm_field_get(i2o_dev, 0x0000, 0, &type, 1) && (type == 0x01)) /* SCSI bus */ max_channel++; } @@ -146,7 +146,7 @@ static struct i2o_scsi_host *i2o_scsi_host_alloc(struct i2o_controller *c) i = 0; list_for_each_entry(i2o_dev, &c->devices, list) if (i2o_dev->lct_data.class_id == I2O_CLASS_BUS_ADAPTER) { - if (i2o_parm_field_get(i2o_dev, 0x0000, 0, &type, 1) + if (!i2o_parm_field_get(i2o_dev, 0x0000, 0, &type, 1) && (type == 0x01)) /* only SCSI bus */ i2o_shost->channel[i++] = i2o_dev; @@ -238,13 +238,15 @@ static int i2o_scsi_probe(struct device *dev) u8 type; struct i2o_device *d = i2o_shost->channel[0]; - if (i2o_parm_field_get(d, 0x0000, 0, &type, 1) + if (!i2o_parm_field_get(d, 0x0000, 0, &type, 1) && (type == 0x01)) /* SCSI bus */ - if (i2o_parm_field_get(d, 0x0200, 4, &id, 4)) { + if (!i2o_parm_field_get(d, 0x0200, 4, &id, 4)) { channel = 0; if (i2o_dev->lct_data.class_id == I2O_CLASS_RANDOM_BLOCK_STORAGE) - lun = i2o_shost->lun++; + lun = + cpu_to_le64(i2o_shost-> + lun++); else lun = 0; } @@ -253,10 +255,10 @@ static int i2o_scsi_probe(struct device *dev) break; case I2O_CLASS_SCSI_PERIPHERAL: - if (i2o_parm_field_get(i2o_dev, 0x0000, 3, &id, 4) < 0) + if (i2o_parm_field_get(i2o_dev, 0x0000, 3, &id, 4)) return -EFAULT; - if (i2o_parm_field_get(i2o_dev, 0x0000, 4, &lun, 8) < 0) + if (i2o_parm_field_get(i2o_dev, 0x0000, 4, &lun, 8)) return -EFAULT; parent = i2o_iop_find_device(c, i2o_dev->lct_data.parent_tid); @@ -281,20 +283,22 @@ static int i2o_scsi_probe(struct device *dev) return -EFAULT; } - if (id >= scsi_host->max_id) { - osm_warn("SCSI device id (%d) >= max_id of I2O host (%d)", id, - scsi_host->max_id); + if (le32_to_cpu(id) >= scsi_host->max_id) { + osm_warn("SCSI device id (%d) >= max_id of I2O host (%d)", + le32_to_cpu(id), scsi_host->max_id); return -EFAULT; } - if (lun >= scsi_host->max_lun) { - osm_warn("SCSI device id (%d) >= max_lun of I2O host (%d)", - (unsigned int)lun, scsi_host->max_lun); + if (le64_to_cpu(lun) >= scsi_host->max_lun) { + osm_warn("SCSI device lun (%lu) >= max_lun of I2O host (%d)", + (long unsigned int)le64_to_cpu(lun), + scsi_host->max_lun); return -EFAULT; } scsi_dev = - __scsi_add_device(i2o_shost->scsi_host, channel, id, lun, i2o_dev); + __scsi_add_device(i2o_shost->scsi_host, channel, le32_to_cpu(id), + le64_to_cpu(lun), i2o_dev); if (IS_ERR(scsi_dev)) { osm_warn("can not add SCSI device %03x\n", @@ -305,8 +309,9 @@ static int i2o_scsi_probe(struct device *dev) sysfs_create_link(&i2o_dev->device.kobj, &scsi_dev->sdev_gendev.kobj, "scsi"); - osm_info("device added (TID: %03x) channel: %d, id: %d, lun: %d\n", - i2o_dev->lct_data.tid, channel, id, (unsigned int)lun); + osm_info("device added (TID: %03x) channel: %d, id: %d, lun: %ld\n", + i2o_dev->lct_data.tid, channel, le32_to_cpu(id), + (long unsigned int)le64_to_cpu(lun)); return 0; }; @@ -510,8 +515,7 @@ static int i2o_scsi_queuecommand(struct scsi_cmnd *SCpnt, struct i2o_controller *c; struct i2o_device *i2o_dev; int tid; - struct i2o_message __iomem *msg; - u32 m; + struct i2o_message *msg; /* * ENABLE_DISCONNECT * SIMPLE_TAG @@ -519,7 +523,7 @@ static int i2o_scsi_queuecommand(struct scsi_cmnd *SCpnt, */ u32 scsi_flags = 0x20a00000; u32 sgl_offset; - u32 __iomem *mptr; + u32 *mptr; u32 cmd = I2O_CMD_SCSI_EXEC << 24; int rc = 0; @@ -576,8 +580,8 @@ static int i2o_scsi_queuecommand(struct scsi_cmnd *SCpnt, * throw it back to the scsi layer */ - m = i2o_msg_get_wait(c, &msg, I2O_TIMEOUT_MESSAGE_GET); - if (m == I2O_QUEUE_EMPTY) { + msg = i2o_msg_get(c); + if (IS_ERR(msg)) { rc = SCSI_MLQUEUE_HOST_BUSY; goto exit; } @@ -617,16 +621,16 @@ static int i2o_scsi_queuecommand(struct scsi_cmnd *SCpnt, if (sgl_offset == SGL_OFFSET_10) sgl_offset = SGL_OFFSET_12; cmd = I2O_CMD_PRIVATE << 24; - writel(I2O_VENDOR_DPT << 16 | I2O_CMD_SCSI_EXEC, mptr++); - writel(adpt_flags | tid, mptr++); + *mptr++ = cpu_to_le32(I2O_VENDOR_DPT << 16 | I2O_CMD_SCSI_EXEC); + *mptr++ = cpu_to_le32(adpt_flags | tid); } #endif - writel(cmd | HOST_TID << 12 | tid, &msg->u.head[1]); - writel(i2o_scsi_driver.context, &msg->u.s.icntxt); + msg->u.head[1] = cpu_to_le32(cmd | HOST_TID << 12 | tid); + msg->u.s.icntxt = cpu_to_le32(i2o_scsi_driver.context); /* We want the SCSI control block back */ - writel(i2o_cntxt_list_add(c, SCpnt), &msg->u.s.tcntxt); + msg->u.s.tcntxt = cpu_to_le32(i2o_cntxt_list_add(c, SCpnt)); /* LSI_920_PCI_QUIRK * @@ -649,15 +653,15 @@ static int i2o_scsi_queuecommand(struct scsi_cmnd *SCpnt, } */ - writel(scsi_flags | SCpnt->cmd_len, mptr++); + *mptr++ = cpu_to_le32(scsi_flags | SCpnt->cmd_len); /* Write SCSI command into the message - always 16 byte block */ - memcpy_toio(mptr, SCpnt->cmnd, 16); + memcpy(mptr, SCpnt->cmnd, 16); mptr += 4; if (sgl_offset != SGL_OFFSET_0) { /* write size of data addressed by SGL */ - writel(SCpnt->request_bufflen, mptr++); + *mptr++ = cpu_to_le32(SCpnt->request_bufflen); /* Now fill in the SGList and command */ if (SCpnt->use_sg) { @@ -676,11 +680,11 @@ static int i2o_scsi_queuecommand(struct scsi_cmnd *SCpnt, } /* Stick the headers on */ - writel(I2O_MESSAGE_SIZE(mptr - &msg->u.head[0]) | sgl_offset, - &msg->u.head[0]); + msg->u.head[0] = + cpu_to_le32(I2O_MESSAGE_SIZE(mptr - &msg->u.head[0]) | sgl_offset); /* Queue the message */ - i2o_msg_post(c, m); + i2o_msg_post(c, msg); osm_debug("Issued %ld\n", SCpnt->serial_number); @@ -688,7 +692,7 @@ static int i2o_scsi_queuecommand(struct scsi_cmnd *SCpnt, nomem: rc = -ENOMEM; - i2o_msg_nop(c, m); + i2o_msg_nop(c, msg); exit: return rc; @@ -709,8 +713,7 @@ static int i2o_scsi_abort(struct scsi_cmnd *SCpnt) { struct i2o_device *i2o_dev; struct i2o_controller *c; - struct i2o_message __iomem *msg; - u32 m; + struct i2o_message *msg; int tid; int status = FAILED; @@ -720,16 +723,16 @@ static int i2o_scsi_abort(struct scsi_cmnd *SCpnt) c = i2o_dev->iop; tid = i2o_dev->lct_data.tid; - m = i2o_msg_get_wait(c, &msg, I2O_TIMEOUT_MESSAGE_GET); - if (m == I2O_QUEUE_EMPTY) + msg = i2o_msg_get_wait(c, I2O_TIMEOUT_MESSAGE_GET); + if (IS_ERR(msg)) return SCSI_MLQUEUE_HOST_BUSY; - writel(FIVE_WORD_MSG_SIZE | SGL_OFFSET_0, &msg->u.head[0]); - writel(I2O_CMD_SCSI_ABORT << 24 | HOST_TID << 12 | tid, - &msg->u.head[1]); - writel(i2o_cntxt_list_get_ptr(c, SCpnt), &msg->body[0]); + msg->u.head[0] = cpu_to_le32(FIVE_WORD_MSG_SIZE | SGL_OFFSET_0); + msg->u.head[1] = + cpu_to_le32(I2O_CMD_SCSI_ABORT << 24 | HOST_TID << 12 | tid); + msg->body[0] = cpu_to_le32(i2o_cntxt_list_get_ptr(c, SCpnt)); - if (i2o_msg_post_wait(c, m, I2O_TIMEOUT_SCSI_SCB_ABORT)) + if (i2o_msg_post_wait(c, msg, I2O_TIMEOUT_SCSI_SCB_ABORT)) status = SUCCESS; return status; diff --git a/drivers/message/i2o/iop.c b/drivers/message/i2o/iop.c index 4eb53258842..49216744693 100644 --- a/drivers/message/i2o/iop.c +++ b/drivers/message/i2o/iop.c @@ -32,7 +32,7 @@ #include "core.h" #define OSM_NAME "i2o" -#define OSM_VERSION "1.288" +#define OSM_VERSION "1.325" #define OSM_DESCRIPTION "I2O subsystem" /* global I2O controller list */ @@ -47,27 +47,6 @@ static struct i2o_dma i2o_systab; static int i2o_hrt_get(struct i2o_controller *c); /** - * i2o_msg_nop - Returns a message which is not used - * @c: I2O controller from which the message was created - * @m: message which should be returned - * - * If you fetch a message via i2o_msg_get, and can't use it, you must - * return the message with this function. Otherwise the message frame - * is lost. - */ -void i2o_msg_nop(struct i2o_controller *c, u32 m) -{ - struct i2o_message __iomem *msg = i2o_msg_in_to_virt(c, m); - - writel(THREE_WORD_MSG_SIZE | SGL_OFFSET_0, &msg->u.head[0]); - writel(I2O_CMD_UTIL_NOP << 24 | HOST_TID << 12 | ADAPTER_TID, - &msg->u.head[1]); - writel(0, &msg->u.head[2]); - writel(0, &msg->u.head[3]); - i2o_msg_post(c, m); -}; - -/** * i2o_msg_get_wait - obtain an I2O message from the IOP * @c: I2O controller * @msg: pointer to a I2O message pointer @@ -81,22 +60,21 @@ void i2o_msg_nop(struct i2o_controller *c, u32 m) * address from the read port (see the i2o spec). If no message is * available returns I2O_QUEUE_EMPTY and msg is leaved untouched. */ -u32 i2o_msg_get_wait(struct i2o_controller *c, - struct i2o_message __iomem ** msg, int wait) +struct i2o_message *i2o_msg_get_wait(struct i2o_controller *c, int wait) { unsigned long timeout = jiffies + wait * HZ; - u32 m; + struct i2o_message *msg; - while ((m = i2o_msg_get(c, msg)) == I2O_QUEUE_EMPTY) { + while (IS_ERR(msg = i2o_msg_get(c))) { if (time_after(jiffies, timeout)) { osm_debug("%s: Timeout waiting for message frame.\n", c->name); - return I2O_QUEUE_EMPTY; + return ERR_PTR(-ETIMEDOUT); } schedule_timeout_uninterruptible(1); } - return m; + return msg; }; #if BITS_PER_LONG == 64 @@ -301,8 +279,7 @@ struct i2o_device *i2o_iop_find_device(struct i2o_controller *c, u16 tid) */ static int i2o_iop_quiesce(struct i2o_controller *c) { - struct i2o_message __iomem *msg; - u32 m; + struct i2o_message *msg; i2o_status_block *sb = c->status_block.virt; int rc; @@ -313,16 +290,17 @@ static int i2o_iop_quiesce(struct i2o_controller *c) (sb->iop_state != ADAPTER_STATE_OPERATIONAL)) return 0; - m = i2o_msg_get_wait(c, &msg, I2O_TIMEOUT_MESSAGE_GET); - if (m == I2O_QUEUE_EMPTY) - return -ETIMEDOUT; + msg = i2o_msg_get_wait(c, I2O_TIMEOUT_MESSAGE_GET); + if (IS_ERR(msg)) + return PTR_ERR(msg); - writel(FOUR_WORD_MSG_SIZE | SGL_OFFSET_0, &msg->u.head[0]); - writel(I2O_CMD_SYS_QUIESCE << 24 | HOST_TID << 12 | ADAPTER_TID, - &msg->u.head[1]); + msg->u.head[0] = cpu_to_le32(FOUR_WORD_MSG_SIZE | SGL_OFFSET_0); + msg->u.head[1] = + cpu_to_le32(I2O_CMD_SYS_QUIESCE << 24 | HOST_TID << 12 | + ADAPTER_TID); /* Long timeout needed for quiesce if lots of devices */ - if ((rc = i2o_msg_post_wait(c, m, 240))) + if ((rc = i2o_msg_post_wait(c, msg, 240))) osm_info("%s: Unable to quiesce (status=%#x).\n", c->name, -rc); else osm_debug("%s: Quiesced.\n", c->name); @@ -342,8 +320,7 @@ static int i2o_iop_quiesce(struct i2o_controller *c) */ static int i2o_iop_enable(struct i2o_controller *c) { - struct i2o_message __iomem *msg; - u32 m; + struct i2o_message *msg; i2o_status_block *sb = c->status_block.virt; int rc; @@ -353,16 +330,17 @@ static int i2o_iop_enable(struct i2o_controller *c) if (sb->iop_state != ADAPTER_STATE_READY) return -EINVAL; - m = i2o_msg_get_wait(c, &msg, I2O_TIMEOUT_MESSAGE_GET); - if (m == I2O_QUEUE_EMPTY) - return -ETIMEDOUT; + msg = i2o_msg_get_wait(c, I2O_TIMEOUT_MESSAGE_GET); + if (IS_ERR(msg)) + return PTR_ERR(msg); - writel(FOUR_WORD_MSG_SIZE | SGL_OFFSET_0, &msg->u.head[0]); - writel(I2O_CMD_SYS_ENABLE << 24 | HOST_TID << 12 | ADAPTER_TID, - &msg->u.head[1]); + msg->u.head[0] = cpu_to_le32(FOUR_WORD_MSG_SIZE | SGL_OFFSET_0); + msg->u.head[1] = + cpu_to_le32(I2O_CMD_SYS_ENABLE << 24 | HOST_TID << 12 | + ADAPTER_TID); /* How long of a timeout do we need? */ - if ((rc = i2o_msg_post_wait(c, m, 240))) + if ((rc = i2o_msg_post_wait(c, msg, 240))) osm_err("%s: Could not enable (status=%#x).\n", c->name, -rc); else osm_debug("%s: Enabled.\n", c->name); @@ -413,22 +391,22 @@ static inline void i2o_iop_enable_all(void) */ static int i2o_iop_clear(struct i2o_controller *c) { - struct i2o_message __iomem *msg; - u32 m; + struct i2o_message *msg; int rc; - m = i2o_msg_get_wait(c, &msg, I2O_TIMEOUT_MESSAGE_GET); - if (m == I2O_QUEUE_EMPTY) - return -ETIMEDOUT; + msg = i2o_msg_get_wait(c, I2O_TIMEOUT_MESSAGE_GET); + if (IS_ERR(msg)) + return PTR_ERR(msg); /* Quiesce all IOPs first */ i2o_iop_quiesce_all(); - writel(FOUR_WORD_MSG_SIZE | SGL_OFFSET_0, &msg->u.head[0]); - writel(I2O_CMD_ADAPTER_CLEAR << 24 | HOST_TID << 12 | ADAPTER_TID, - &msg->u.head[1]); + msg->u.head[0] = cpu_to_le32(FOUR_WORD_MSG_SIZE | SGL_OFFSET_0); + msg->u.head[1] = + cpu_to_le32(I2O_CMD_ADAPTER_CLEAR << 24 | HOST_TID << 12 | + ADAPTER_TID); - if ((rc = i2o_msg_post_wait(c, m, 30))) + if ((rc = i2o_msg_post_wait(c, msg, 30))) osm_info("%s: Unable to clear (status=%#x).\n", c->name, -rc); else osm_debug("%s: Cleared.\n", c->name); @@ -446,13 +424,13 @@ static int i2o_iop_clear(struct i2o_controller *c) * Clear and (re)initialize IOP's outbound queue and post the message * frames to the IOP. * - * Returns 0 on success or a negative errno code on failure. + * Returns 0 on success or negative error code on failure. */ static int i2o_iop_init_outbound_queue(struct i2o_controller *c) { - volatile u8 *status = c->status.virt; u32 m; - struct i2o_message __iomem *msg; + volatile u8 *status = c->status.virt; + struct i2o_message *msg; ulong timeout; int i; @@ -460,23 +438,24 @@ static int i2o_iop_init_outbound_queue(struct i2o_controller *c) memset(c->status.virt, 0, 4); - m = i2o_msg_get_wait(c, &msg, I2O_TIMEOUT_MESSAGE_GET); - if (m == I2O_QUEUE_EMPTY) - return -ETIMEDOUT; - - writel(EIGHT_WORD_MSG_SIZE | SGL_OFFSET_6, &msg->u.head[0]); - writel(I2O_CMD_OUTBOUND_INIT << 24 | HOST_TID << 12 | ADAPTER_TID, - &msg->u.head[1]); - writel(i2o_exec_driver.context, &msg->u.s.icntxt); - writel(0x00000000, &msg->u.s.tcntxt); - writel(PAGE_SIZE, &msg->body[0]); + msg = i2o_msg_get_wait(c, I2O_TIMEOUT_MESSAGE_GET); + if (IS_ERR(msg)) + return PTR_ERR(msg); + + msg->u.head[0] = cpu_to_le32(EIGHT_WORD_MSG_SIZE | SGL_OFFSET_6); + msg->u.head[1] = + cpu_to_le32(I2O_CMD_OUTBOUND_INIT << 24 | HOST_TID << 12 | + ADAPTER_TID); + msg->u.s.icntxt = cpu_to_le32(i2o_exec_driver.context); + msg->u.s.tcntxt = cpu_to_le32(0x00000000); + msg->body[0] = cpu_to_le32(PAGE_SIZE); /* Outbound msg frame size in words and Initcode */ - writel(I2O_OUTBOUND_MSG_FRAME_SIZE << 16 | 0x80, &msg->body[1]); - writel(0xd0000004, &msg->body[2]); - writel(i2o_dma_low(c->status.phys), &msg->body[3]); - writel(i2o_dma_high(c->status.phys), &msg->body[4]); + msg->body[1] = cpu_to_le32(I2O_OUTBOUND_MSG_FRAME_SIZE << 16 | 0x80); + msg->body[2] = cpu_to_le32(0xd0000004); + msg->body[3] = cpu_to_le32(i2o_dma_low(c->status.phys)); + msg->body[4] = cpu_to_le32(i2o_dma_high(c->status.phys)); - i2o_msg_post(c, m); + i2o_msg_post(c, msg); timeout = jiffies + I2O_TIMEOUT_INIT_OUTBOUND_QUEUE * HZ; while (*status <= I2O_CMD_IN_PROGRESS) { @@ -511,34 +490,34 @@ static int i2o_iop_init_outbound_queue(struct i2o_controller *c) static int i2o_iop_reset(struct i2o_controller *c) { volatile u8 *status = c->status.virt; - struct i2o_message __iomem *msg; - u32 m; + struct i2o_message *msg; unsigned long timeout; i2o_status_block *sb = c->status_block.virt; int rc = 0; osm_debug("%s: Resetting controller\n", c->name); - m = i2o_msg_get_wait(c, &msg, I2O_TIMEOUT_MESSAGE_GET); - if (m == I2O_QUEUE_EMPTY) - return -ETIMEDOUT; + msg = i2o_msg_get_wait(c, I2O_TIMEOUT_MESSAGE_GET); + if (IS_ERR(msg)) + return PTR_ERR(msg); memset(c->status_block.virt, 0, 8); /* Quiesce all IOPs first */ i2o_iop_quiesce_all(); - writel(EIGHT_WORD_MSG_SIZE | SGL_OFFSET_0, &msg->u.head[0]); - writel(I2O_CMD_ADAPTER_RESET << 24 | HOST_TID << 12 | ADAPTER_TID, - &msg->u.head[1]); - writel(i2o_exec_driver.context, &msg->u.s.icntxt); - writel(0, &msg->u.s.tcntxt); //FIXME: use reasonable transaction context - writel(0, &msg->body[0]); - writel(0, &msg->body[1]); - writel(i2o_dma_low(c->status.phys), &msg->body[2]); - writel(i2o_dma_high(c->status.phys), &msg->body[3]); + msg->u.head[0] = cpu_to_le32(EIGHT_WORD_MSG_SIZE | SGL_OFFSET_0); + msg->u.head[1] = + cpu_to_le32(I2O_CMD_ADAPTER_RESET << 24 | HOST_TID << 12 | + ADAPTER_TID); + msg->u.s.icntxt = cpu_to_le32(i2o_exec_driver.context); + msg->u.s.tcntxt = cpu_to_le32(0x00000000); + msg->body[0] = cpu_to_le32(0x00000000); + msg->body[1] = cpu_to_le32(0x00000000); + msg->body[2] = cpu_to_le32(i2o_dma_low(c->status.phys)); + msg->body[3] = cpu_to_le32(i2o_dma_high(c->status.phys)); - i2o_msg_post(c, m); + i2o_msg_post(c, msg); /* Wait for a reply */ timeout = jiffies + I2O_TIMEOUT_RESET * HZ; @@ -567,18 +546,15 @@ static int i2o_iop_reset(struct i2o_controller *c) osm_debug("%s: Reset in progress, waiting for reboot...\n", c->name); - m = i2o_msg_get_wait(c, &msg, I2O_TIMEOUT_RESET); - while (m == I2O_QUEUE_EMPTY) { + while (IS_ERR(msg = i2o_msg_get_wait(c, I2O_TIMEOUT_RESET))) { if (time_after(jiffies, timeout)) { osm_err("%s: IOP reset timeout.\n", c->name); - rc = -ETIMEDOUT; + rc = PTR_ERR(msg); goto exit; } schedule_timeout_uninterruptible(1); - - m = i2o_msg_get_wait(c, &msg, I2O_TIMEOUT_RESET); } - i2o_msg_nop(c, m); + i2o_msg_nop(c, msg); /* from here all quiesce commands are safe */ c->no_quiesce = 0; @@ -686,8 +662,7 @@ static int i2o_iop_activate(struct i2o_controller *c) */ static int i2o_iop_systab_set(struct i2o_controller *c) { - struct i2o_message __iomem *msg; - u32 m; + struct i2o_message *msg; i2o_status_block *sb = c->status_block.virt; struct device *dev = &c->pdev->dev; struct resource *root; @@ -735,41 +710,38 @@ static int i2o_iop_systab_set(struct i2o_controller *c) } } - m = i2o_msg_get_wait(c, &msg, I2O_TIMEOUT_MESSAGE_GET); - if (m == I2O_QUEUE_EMPTY) - return -ETIMEDOUT; + msg = i2o_msg_get_wait(c, I2O_TIMEOUT_MESSAGE_GET); + if (IS_ERR(msg)) + return PTR_ERR(msg); i2o_systab.phys = dma_map_single(dev, i2o_systab.virt, i2o_systab.len, PCI_DMA_TODEVICE); if (!i2o_systab.phys) { - i2o_msg_nop(c, m); + i2o_msg_nop(c, msg); return -ENOMEM; } - writel(I2O_MESSAGE_SIZE(12) | SGL_OFFSET_6, &msg->u.head[0]); - writel(I2O_CMD_SYS_TAB_SET << 24 | HOST_TID << 12 | ADAPTER_TID, - &msg->u.head[1]); + msg->u.head[0] = cpu_to_le32(I2O_MESSAGE_SIZE(12) | SGL_OFFSET_6); + msg->u.head[1] = + cpu_to_le32(I2O_CMD_SYS_TAB_SET << 24 | HOST_TID << 12 | + ADAPTER_TID); /* * Provide three SGL-elements: * System table (SysTab), Private memory space declaration and * Private i/o space declaration - * - * FIXME: is this still true? - * Nasty one here. We can't use dma_alloc_coherent to send the - * same table to everyone. We have to go remap it for them all */ - writel(c->unit + 2, &msg->body[0]); - writel(0, &msg->body[1]); - writel(0x54000000 | i2o_systab.len, &msg->body[2]); - writel(i2o_systab.phys, &msg->body[3]); - writel(0x54000000 | sb->current_mem_size, &msg->body[4]); - writel(sb->current_mem_base, &msg->body[5]); - writel(0xd4000000 | sb->current_io_size, &msg->body[6]); - writel(sb->current_io_base, &msg->body[6]); + msg->body[0] = cpu_to_le32(c->unit + 2); + msg->body[1] = cpu_to_le32(0x00000000); + msg->body[2] = cpu_to_le32(0x54000000 | i2o_systab.len); + msg->body[3] = cpu_to_le32(i2o_systab.phys); + msg->body[4] = cpu_to_le32(0x54000000 | sb->current_mem_size); + msg->body[5] = cpu_to_le32(sb->current_mem_base); + msg->body[6] = cpu_to_le32(0xd4000000 | sb->current_io_size); + msg->body[6] = cpu_to_le32(sb->current_io_base); - rc = i2o_msg_post_wait(c, m, 120); + rc = i2o_msg_post_wait(c, msg, 120); dma_unmap_single(dev, i2o_systab.phys, i2o_systab.len, PCI_DMA_TODEVICE); @@ -780,8 +752,6 @@ static int i2o_iop_systab_set(struct i2o_controller *c) else osm_debug("%s: SysTab set.\n", c->name); - i2o_status_get(c); // Entered READY state - return rc; } @@ -791,7 +761,7 @@ static int i2o_iop_systab_set(struct i2o_controller *c) * * Send the system table and enable the I2O controller. * - * Returns 0 on success or negativer error code on failure. + * Returns 0 on success or negative error code on failure. */ static int i2o_iop_online(struct i2o_controller *c) { @@ -830,7 +800,6 @@ void i2o_iop_remove(struct i2o_controller *c) list_for_each_entry_safe(dev, tmp, &c->devices, list) i2o_device_remove(dev); - class_device_unregister(c->classdev); device_del(&c->device); /* Ask the IOP to switch to RESET state */ @@ -869,12 +838,11 @@ static int i2o_systab_build(void) i2o_systab.len = sizeof(struct i2o_sys_tbl) + num_controllers * sizeof(struct i2o_sys_tbl_entry); - systab = i2o_systab.virt = kmalloc(i2o_systab.len, GFP_KERNEL); + systab = i2o_systab.virt = kzalloc(i2o_systab.len, GFP_KERNEL); if (!systab) { osm_err("unable to allocate memory for System Table\n"); return -ENOMEM; } - memset(systab, 0, i2o_systab.len); systab->version = I2OVERSION; systab->change_ind = change_ind + 1; @@ -952,30 +920,30 @@ static int i2o_parse_hrt(struct i2o_controller *c) */ int i2o_status_get(struct i2o_controller *c) { - struct i2o_message __iomem *msg; - u32 m; + struct i2o_message *msg; volatile u8 *status_block; unsigned long timeout; status_block = (u8 *) c->status_block.virt; memset(c->status_block.virt, 0, sizeof(i2o_status_block)); - m = i2o_msg_get_wait(c, &msg, I2O_TIMEOUT_MESSAGE_GET); - if (m == I2O_QUEUE_EMPTY) - return -ETIMEDOUT; + msg = i2o_msg_get_wait(c, I2O_TIMEOUT_MESSAGE_GET); + if (IS_ERR(msg)) + return PTR_ERR(msg); - writel(NINE_WORD_MSG_SIZE | SGL_OFFSET_0, &msg->u.head[0]); - writel(I2O_CMD_STATUS_GET << 24 | HOST_TID << 12 | ADAPTER_TID, - &msg->u.head[1]); - writel(i2o_exec_driver.context, &msg->u.s.icntxt); - writel(0, &msg->u.s.tcntxt); // FIXME: use resonable transaction context - writel(0, &msg->body[0]); - writel(0, &msg->body[1]); - writel(i2o_dma_low(c->status_block.phys), &msg->body[2]); - writel(i2o_dma_high(c->status_block.phys), &msg->body[3]); - writel(sizeof(i2o_status_block), &msg->body[4]); /* always 88 bytes */ + msg->u.head[0] = cpu_to_le32(NINE_WORD_MSG_SIZE | SGL_OFFSET_0); + msg->u.head[1] = + cpu_to_le32(I2O_CMD_STATUS_GET << 24 | HOST_TID << 12 | + ADAPTER_TID); + msg->u.s.icntxt = cpu_to_le32(i2o_exec_driver.context); + msg->u.s.tcntxt = cpu_to_le32(0x00000000); + msg->body[0] = cpu_to_le32(0x00000000); + msg->body[1] = cpu_to_le32(0x00000000); + msg->body[2] = cpu_to_le32(i2o_dma_low(c->status_block.phys)); + msg->body[3] = cpu_to_le32(i2o_dma_high(c->status_block.phys)); + msg->body[4] = cpu_to_le32(sizeof(i2o_status_block)); /* always 88 bytes */ - i2o_msg_post(c, m); + i2o_msg_post(c, msg); /* Wait for a reply */ timeout = jiffies + I2O_TIMEOUT_STATUS_GET * HZ; @@ -1002,7 +970,7 @@ int i2o_status_get(struct i2o_controller *c) * The HRT contains information about possible hidden devices but is * mostly useless to us. * - * Returns 0 on success or negativer error code on failure. + * Returns 0 on success or negative error code on failure. */ static int i2o_hrt_get(struct i2o_controller *c) { @@ -1013,20 +981,20 @@ static int i2o_hrt_get(struct i2o_controller *c) struct device *dev = &c->pdev->dev; for (i = 0; i < I2O_HRT_GET_TRIES; i++) { - struct i2o_message __iomem *msg; - u32 m; + struct i2o_message *msg; - m = i2o_msg_get_wait(c, &msg, I2O_TIMEOUT_MESSAGE_GET); - if (m == I2O_QUEUE_EMPTY) - return -ETIMEDOUT; + msg = i2o_msg_get_wait(c, I2O_TIMEOUT_MESSAGE_GET); + if (IS_ERR(msg)) + return PTR_ERR(msg); - writel(SIX_WORD_MSG_SIZE | SGL_OFFSET_4, &msg->u.head[0]); - writel(I2O_CMD_HRT_GET << 24 | HOST_TID << 12 | ADAPTER_TID, - &msg->u.head[1]); - writel(0xd0000000 | c->hrt.len, &msg->body[0]); - writel(c->hrt.phys, &msg->body[1]); + msg->u.head[0] = cpu_to_le32(SIX_WORD_MSG_SIZE | SGL_OFFSET_4); + msg->u.head[1] = + cpu_to_le32(I2O_CMD_HRT_GET << 24 | HOST_TID << 12 | + ADAPTER_TID); + msg->body[0] = cpu_to_le32(0xd0000000 | c->hrt.len); + msg->body[1] = cpu_to_le32(c->hrt.phys); - rc = i2o_msg_post_wait_mem(c, m, 20, &c->hrt); + rc = i2o_msg_post_wait_mem(c, msg, 20, &c->hrt); if (rc < 0) { osm_err("%s: Unable to get HRT (status=%#x)\n", c->name, @@ -1051,15 +1019,6 @@ static int i2o_hrt_get(struct i2o_controller *c) } /** - * i2o_iop_free - Free the i2o_controller struct - * @c: I2O controller to free - */ -void i2o_iop_free(struct i2o_controller *c) -{ - kfree(c); -}; - -/** * i2o_iop_release - release the memory for a I2O controller * @dev: I2O controller which should be released * @@ -1073,14 +1032,11 @@ static void i2o_iop_release(struct device *dev) i2o_iop_free(c); }; -/* I2O controller class */ -static struct class *i2o_controller_class; - /** * i2o_iop_alloc - Allocate and initialize a i2o_controller struct * * Allocate the necessary memory for a i2o_controller struct and - * initialize the lists. + * initialize the lists and message mempool. * * Returns a pointer to the I2O controller or a negative error code on * failure. @@ -1089,20 +1045,29 @@ struct i2o_controller *i2o_iop_alloc(void) { static int unit = 0; /* 0 and 1 are NULL IOP and Local Host */ struct i2o_controller *c; + char poolname[32]; - c = kmalloc(sizeof(*c), GFP_KERNEL); + c = kzalloc(sizeof(*c), GFP_KERNEL); if (!c) { osm_err("i2o: Insufficient memory to allocate a I2O controller." "\n"); return ERR_PTR(-ENOMEM); } - memset(c, 0, sizeof(*c)); + + c->unit = unit++; + sprintf(c->name, "iop%d", c->unit); + + snprintf(poolname, sizeof(poolname), "i2o_%s_msg_inpool", c->name); + if (i2o_pool_alloc + (&c->in_msg, poolname, I2O_INBOUND_MSG_FRAME_SIZE * 4, + I2O_MSG_INPOOL_MIN)) { + kfree(c); + return ERR_PTR(-ENOMEM); + }; INIT_LIST_HEAD(&c->devices); spin_lock_init(&c->lock); init_MUTEX(&c->lct_lock); - c->unit = unit++; - sprintf(c->name, "iop%d", c->unit); device_initialize(&c->device); @@ -1137,36 +1102,29 @@ int i2o_iop_add(struct i2o_controller *c) goto iop_reset; } - c->classdev = class_device_create(i2o_controller_class, NULL, MKDEV(0,0), - &c->device, "iop%d", c->unit); - if (IS_ERR(c->classdev)) { - osm_err("%s: could not add controller class\n", c->name); - goto device_del; - } - osm_info("%s: Activating I2O controller...\n", c->name); osm_info("%s: This may take a few minutes if there are many devices\n", c->name); if ((rc = i2o_iop_activate(c))) { osm_err("%s: could not activate controller\n", c->name); - goto class_del; + goto device_del; } osm_debug("%s: building sys table...\n", c->name); if ((rc = i2o_systab_build())) - goto class_del; + goto device_del; osm_debug("%s: online controller...\n", c->name); if ((rc = i2o_iop_online(c))) - goto class_del; + goto device_del; osm_debug("%s: getting LCT...\n", c->name); if ((rc = i2o_exec_lct_get(c))) - goto class_del; + goto device_del; list_add(&c->list, &i2o_controllers); @@ -1176,9 +1134,6 @@ int i2o_iop_add(struct i2o_controller *c) return 0; - class_del: - class_device_unregister(c->classdev); - device_del: device_del(&c->device); @@ -1199,28 +1154,27 @@ int i2o_iop_add(struct i2o_controller *c) * is waited for, or expected. If you do not want further notifications, * call the i2o_event_register again with a evt_mask of 0. * - * Returns 0 on success or -ETIMEDOUT if no message could be fetched for - * sending the request. + * Returns 0 on success or negative error code on failure. */ int i2o_event_register(struct i2o_device *dev, struct i2o_driver *drv, int tcntxt, u32 evt_mask) { struct i2o_controller *c = dev->iop; - struct i2o_message __iomem *msg; - u32 m; + struct i2o_message *msg; - m = i2o_msg_get_wait(c, &msg, I2O_TIMEOUT_MESSAGE_GET); - if (m == I2O_QUEUE_EMPTY) - return -ETIMEDOUT; + msg = i2o_msg_get_wait(c, I2O_TIMEOUT_MESSAGE_GET); + if (IS_ERR(msg)) + return PTR_ERR(msg); - writel(FIVE_WORD_MSG_SIZE | SGL_OFFSET_0, &msg->u.head[0]); - writel(I2O_CMD_UTIL_EVT_REGISTER << 24 | HOST_TID << 12 | dev->lct_data. - tid, &msg->u.head[1]); - writel(drv->context, &msg->u.s.icntxt); - writel(tcntxt, &msg->u.s.tcntxt); - writel(evt_mask, &msg->body[0]); + msg->u.head[0] = cpu_to_le32(FIVE_WORD_MSG_SIZE | SGL_OFFSET_0); + msg->u.head[1] = + cpu_to_le32(I2O_CMD_UTIL_EVT_REGISTER << 24 | HOST_TID << 12 | dev-> + lct_data.tid); + msg->u.s.icntxt = cpu_to_le32(drv->context); + msg->u.s.tcntxt = cpu_to_le32(tcntxt); + msg->body[0] = cpu_to_le32(evt_mask); - i2o_msg_post(c, m); + i2o_msg_post(c, msg); return 0; }; @@ -1239,14 +1193,8 @@ static int __init i2o_iop_init(void) printk(KERN_INFO OSM_DESCRIPTION " v" OSM_VERSION "\n"); - i2o_controller_class = class_create(THIS_MODULE, "i2o_controller"); - if (IS_ERR(i2o_controller_class)) { - osm_err("can't register class i2o_controller\n"); - goto exit; - } - if ((rc = i2o_driver_init())) - goto class_exit; + goto exit; if ((rc = i2o_exec_init())) goto driver_exit; @@ -1262,9 +1210,6 @@ static int __init i2o_iop_init(void) driver_exit: i2o_driver_exit(); - class_exit: - class_destroy(i2o_controller_class); - exit: return rc; } @@ -1279,7 +1224,6 @@ static void __exit i2o_iop_exit(void) i2o_pci_exit(); i2o_exec_exit(); i2o_driver_exit(); - class_destroy(i2o_controller_class); }; module_init(i2o_iop_init); diff --git a/drivers/message/i2o/pci.c b/drivers/message/i2o/pci.c index ee7075fa1ec..d698d7709c3 100644 --- a/drivers/message/i2o/pci.c +++ b/drivers/message/i2o/pci.c @@ -88,11 +88,6 @@ static int __devinit i2o_pci_alloc(struct i2o_controller *c) struct device *dev = &pdev->dev; int i; - if (pci_request_regions(pdev, OSM_DESCRIPTION)) { - printk(KERN_ERR "%s: device already claimed\n", c->name); - return -ENODEV; - } - for (i = 0; i < 6; i++) { /* Skip I/O spaces */ if (!(pci_resource_flags(pdev, i) & IORESOURCE_IO)) { @@ -319,6 +314,11 @@ static int __devinit i2o_pci_probe(struct pci_dev *pdev, return rc; } + if (pci_request_regions(pdev, OSM_DESCRIPTION)) { + printk(KERN_ERR "i2o: device already claimed\n"); + return -ENODEV; + } + if (pci_set_dma_mask(pdev, DMA_32BIT_MASK)) { printk(KERN_WARNING "i2o: no suitable DMA found for %s\n", pci_name(pdev)); @@ -339,7 +339,7 @@ static int __devinit i2o_pci_probe(struct pci_dev *pdev, pci_name(pdev)); c->pdev = pdev; - c->device.parent = get_device(&pdev->dev); + c->device.parent = &pdev->dev; /* Cards that fall apart if you hit them with large I/O loads... */ if (pdev->vendor == PCI_VENDOR_ID_NCR && pdev->device == 0x0630) { @@ -410,8 +410,6 @@ static int __devinit i2o_pci_probe(struct pci_dev *pdev, if ((rc = i2o_iop_add(c))) goto uninstall; - get_device(&c->device); - if (i960) pci_write_config_word(i960, 0x42, 0x03ff); @@ -424,7 +422,6 @@ static int __devinit i2o_pci_probe(struct pci_dev *pdev, i2o_pci_free(c); free_controller: - put_device(c->device.parent); i2o_iop_free(c); disable: @@ -454,7 +451,6 @@ static void __devexit i2o_pci_remove(struct pci_dev *pdev) printk(KERN_INFO "%s: Controller removed.\n", c->name); - put_device(c->device.parent); put_device(&c->device); }; @@ -483,4 +479,5 @@ void __exit i2o_pci_exit(void) { pci_unregister_driver(&i2o_pci_driver); }; + MODULE_DEVICE_TABLE(pci, i2o_pci_ids); |