diff options
Diffstat (limited to 'drivers/message')
| -rw-r--r-- | drivers/message/fusion/Makefile | 5 | ||||
| -rw-r--r-- | drivers/message/fusion/lsi/fc_log.h | 89 | ||||
| -rw-r--r-- | drivers/message/fusion/lsi/mpi.h | 5 | ||||
| -rw-r--r-- | drivers/message/fusion/lsi/mpi_cnfg.h | 158 | ||||
| -rw-r--r-- | drivers/message/fusion/lsi/mpi_history.txt | 76 | ||||
| -rw-r--r-- | drivers/message/fusion/lsi/mpi_init.h | 4 | ||||
| -rw-r--r-- | drivers/message/fusion/lsi/mpi_ioc.h | 154 | ||||
| -rw-r--r-- | drivers/message/fusion/lsi/mpi_log_sas.h | 82 | ||||
| -rw-r--r-- | drivers/message/fusion/lsi/mpi_sas.h | 13 | ||||
| -rw-r--r-- | drivers/message/fusion/lsi/mpi_targ.h | 5 | ||||
| -rw-r--r-- | drivers/message/fusion/mptbase.c | 75 | ||||
| -rw-r--r-- | drivers/message/fusion/mptbase.h | 19 | ||||
| -rw-r--r-- | drivers/message/fusion/mptfc.c | 16 | ||||
| -rw-r--r-- | drivers/message/fusion/mptsas.c | 996 | ||||
| -rw-r--r-- | drivers/message/fusion/mptspi.c | 4 |
15 files changed, 1211 insertions, 490 deletions
diff --git a/drivers/message/fusion/Makefile b/drivers/message/fusion/Makefile index 51740b34622..b114236f439 100644 --- a/drivers/message/fusion/Makefile +++ b/drivers/message/fusion/Makefile @@ -33,6 +33,11 @@ # For mptfc: #CFLAGS_mptfc.o += -DMPT_DEBUG_FC +# For mptsas: +#CFLAGS_mptsas.o += -DMPT_DEBUG_SAS +#CFLAGS_mptsas.o += -DMPT_DEBUG_SAS_WIDE + + #=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-} LSI_LOGIC obj-$(CONFIG_FUSION_SPI) += mptbase.o mptscsih.o mptspi.o diff --git a/drivers/message/fusion/lsi/fc_log.h b/drivers/message/fusion/lsi/fc_log.h deleted file mode 100644 index dc98d46f907..00000000000 --- a/drivers/message/fusion/lsi/fc_log.h +++ /dev/null @@ -1,89 +0,0 @@ -/* - * Copyright (c) 2000-2001 LSI Logic Corporation. All rights reserved. - * - * NAME: fc_log.h - * SUMMARY: MPI IocLogInfo definitions for the SYMFC9xx chips - * DESCRIPTION: Contains the enumerated list of values that may be returned - * in the IOCLogInfo field of a MPI Default Reply Message. - * - * CREATION DATE: 6/02/2000 - * ID: $Id: fc_log.h,v 4.6 2001/07/26 14:41:33 sschremm Exp $ - */ - - -/* - * MpiIocLogInfo_t enum - * - * These 32 bit values are used in the IOCLogInfo field of the MPI reply - * messages. - * The value is 0xabcccccc where - * a = The type of log info as per the MPI spec. Since these codes are - * all for Fibre Channel this value will always be 2. - * b = Specifies a subclass of the firmware where - * 0 = FCP Initiator - * 1 = FCP Target - * 2 = LAN - * 3 = MPI Message Layer - * 4 = FC Link - * 5 = Context Manager - * 6 = Invalid Field Offset - * 7 = State Change Info - * all others are reserved for future use - * c = A specific value within the subclass. - * - * NOTE: Any new values should be added to the end of each subclass so that the - * codes remain consistent across firmware releases. - */ -typedef enum _MpiIocLogInfoFc -{ - MPI_IOCLOGINFO_FC_INIT_BASE = 0x20000000, - MPI_IOCLOGINFO_FC_INIT_ERROR_OUT_OF_ORDER_FRAME = 0x20000001, /* received an out of order frame - unsupported */ - MPI_IOCLOGINFO_FC_INIT_ERROR_BAD_START_OF_FRAME = 0x20000002, /* Bad Rx Frame, bad start of frame primative */ - MPI_IOCLOGINFO_FC_INIT_ERROR_BAD_END_OF_FRAME = 0x20000003, /* Bad Rx Frame, bad end of frame primative */ - MPI_IOCLOGINFO_FC_INIT_ERROR_OVER_RUN = 0x20000004, /* Bad Rx Frame, overrun */ - MPI_IOCLOGINFO_FC_INIT_ERROR_RX_OTHER = 0x20000005, /* Other errors caught by IOC which require retries */ - MPI_IOCLOGINFO_FC_INIT_ERROR_SUBPROC_DEAD = 0x20000006, /* Main processor could not initialize sub-processor */ - MPI_IOCLOGINFO_FC_INIT_ERROR_RX_OVERRUN = 0x20000007, /* Scatter Gather overrun */ - MPI_IOCLOGINFO_FC_INIT_ERROR_RX_BAD_STATUS = 0x20000008, /* Receiver detected context mismatch via invalid header */ - MPI_IOCLOGINFO_FC_INIT_ERROR_RX_UNEXPECTED_FRAME= 0x20000009, /* CtxMgr detected unsupported frame type */ - MPI_IOCLOGINFO_FC_INIT_ERROR_LINK_FAILURE = 0x2000000A, /* Link failure occurred */ - MPI_IOCLOGINFO_FC_INIT_ERROR_TX_TIMEOUT = 0x2000000B, /* Transmitter timeout error */ - - MPI_IOCLOGINFO_FC_TARGET_BASE = 0x21000000, - MPI_IOCLOGINFO_FC_TARGET_NO_PDISC = 0x21000001, /* not sent because we are waiting for a PDISC from the initiator */ - MPI_IOCLOGINFO_FC_TARGET_NO_LOGIN = 0x21000002, /* not sent because we are not logged in to the remote node */ - MPI_IOCLOGINFO_FC_TARGET_DOAR_KILLED_BY_LIP = 0x21000003, /* Data Out, Auto Response, not sent due to a LIP */ - MPI_IOCLOGINFO_FC_TARGET_DIAR_KILLED_BY_LIP = 0x21000004, /* Data In, Auto Response, not sent due to a LIP */ - MPI_IOCLOGINFO_FC_TARGET_DIAR_MISSING_DATA = 0x21000005, /* Data In, Auto Response, missing data frames */ - MPI_IOCLOGINFO_FC_TARGET_DONR_KILLED_BY_LIP = 0x21000006, /* Data Out, No Response, not sent due to a LIP */ - MPI_IOCLOGINFO_FC_TARGET_WRSP_KILLED_BY_LIP = 0x21000007, /* Auto-response after a write not sent due to a LIP */ - MPI_IOCLOGINFO_FC_TARGET_DINR_KILLED_BY_LIP = 0x21000008, /* Data In, No Response, not completed due to a LIP */ - MPI_IOCLOGINFO_FC_TARGET_DINR_MISSING_DATA = 0x21000009, /* Data In, No Response, missing data frames */ - MPI_IOCLOGINFO_FC_TARGET_MRSP_KILLED_BY_LIP = 0x2100000a, /* Manual Response not sent due to a LIP */ - MPI_IOCLOGINFO_FC_TARGET_NO_CLASS_3 = 0x2100000b, /* not sent because remote node does not support Class 3 */ - MPI_IOCLOGINFO_FC_TARGET_LOGIN_NOT_VALID = 0x2100000c, /* not sent because login to remote node not validated */ - MPI_IOCLOGINFO_FC_TARGET_FROM_OUTBOUND = 0x2100000e, /* cleared from the outbound queue after a logout */ - MPI_IOCLOGINFO_FC_TARGET_WAITING_FOR_DATA_IN = 0x2100000f, /* cleared waiting for data after a logout */ - - MPI_IOCLOGINFO_FC_LAN_BASE = 0x22000000, - MPI_IOCLOGINFO_FC_LAN_TRANS_SGL_MISSING = 0x22000001, /* Transaction Context Sgl Missing */ - MPI_IOCLOGINFO_FC_LAN_TRANS_WRONG_PLACE = 0x22000002, /* Transaction Context found before an EOB */ - MPI_IOCLOGINFO_FC_LAN_TRANS_RES_BITS_SET = 0x22000003, /* Transaction Context value has reserved bits set */ - MPI_IOCLOGINFO_FC_LAN_WRONG_SGL_FLAG = 0x22000004, /* Invalid SGL Flags */ - - MPI_IOCLOGINFO_FC_MSG_BASE = 0x23000000, - - MPI_IOCLOGINFO_FC_LINK_BASE = 0x24000000, - MPI_IOCLOGINFO_FC_LINK_LOOP_INIT_TIMEOUT = 0x24000001, /* Loop initialization timed out */ - MPI_IOCLOGINFO_FC_LINK_ALREADY_INITIALIZED = 0x24000002, /* Another system controller already initialized the loop */ - MPI_IOCLOGINFO_FC_LINK_LINK_NOT_ESTABLISHED = 0x24000003, /* Not synchronized to signal or still negotiating (possible cable problem) */ - MPI_IOCLOGINFO_FC_LINK_CRC_ERROR = 0x24000004, /* CRC check detected error on received frame */ - - MPI_IOCLOGINFO_FC_CTX_BASE = 0x25000000, - - MPI_IOCLOGINFO_FC_INVALID_FIELD_BYTE_OFFSET = 0x26000000, /* The lower 24 bits give the byte offset of the field in the request message that is invalid */ - MPI_IOCLOGINFO_FC_INVALID_FIELD_MAX_OFFSET = 0x26ffffff, - - MPI_IOCLOGINFO_FC_STATE_CHANGE = 0x27000000 /* The lower 24 bits give additional information concerning state change */ - -} MpiIocLogInfoFc_t; diff --git a/drivers/message/fusion/lsi/mpi.h b/drivers/message/fusion/lsi/mpi.h index 02cdc840a06..81ad77622da 100644 --- a/drivers/message/fusion/lsi/mpi.h +++ b/drivers/message/fusion/lsi/mpi.h @@ -6,7 +6,7 @@ * Title: MPI Message independent structures and definitions * Creation Date: July 27, 2000 * - * mpi.h Version: 01.05.10 + * mpi.h Version: 01.05.11 * * Version History * --------------- @@ -76,6 +76,7 @@ * Added EEDP IOCStatus codes. * 08-03-05 01.05.09 Bumped MPI_HEADER_VERSION_UNIT. * 08-30-05 01.05.10 Added 2 new IOCStatus codes for Target. + * 03-27-06 01.05.11 Bumped MPI_HEADER_VERSION_UNIT. * -------------------------------------------------------------------------- */ @@ -106,7 +107,7 @@ /* Note: The major versions of 0xe0 through 0xff are reserved */ /* versioning for this MPI header set */ -#define MPI_HEADER_VERSION_UNIT (0x0C) +#define MPI_HEADER_VERSION_UNIT (0x0D) #define MPI_HEADER_VERSION_DEV (0x00) #define MPI_HEADER_VERSION_UNIT_MASK (0xFF00) #define MPI_HEADER_VERSION_UNIT_SHIFT (8) diff --git a/drivers/message/fusion/lsi/mpi_cnfg.h b/drivers/message/fusion/lsi/mpi_cnfg.h index b1becec27e1..47e13e360c1 100644 --- a/drivers/message/fusion/lsi/mpi_cnfg.h +++ b/drivers/message/fusion/lsi/mpi_cnfg.h @@ -6,7 +6,7 @@ * Title: MPI Config message, structures, and Pages * Creation Date: July 27, 2000 * - * mpi_cnfg.h Version: 01.05.11 + * mpi_cnfg.h Version: 01.05.12 * * Version History * --------------- @@ -266,6 +266,16 @@ * Added postpone SATA Init bit to SAS IO Unit Page 1 * ControlFlags. * Changed LogEntry format for Log Page 0. + * 03-27-06 01.05.12 Added two new Flags defines for Manufacturing Page 4. + * Added Manufacturing Page 7. + * Added MPI_IOCPAGE2_CAP_FLAGS_RAID_64_BIT_ADDRESSING. + * Added IOC Page 6. + * Added PrevBootDeviceForm field to CONFIG_PAGE_BIOS_2. + * Added MaxLBAHigh field to RAID Volume Page 0. + * Added Nvdata version fields to SAS IO Unit Page 0. + * Added AdditionalControlFlags, MaxTargetPortConnectTime, + * ReportDeviceMissingDelay, and IODeviceMissingDelay + * fields to SAS IO Unit Page 1. * -------------------------------------------------------------------------- */ @@ -631,9 +641,11 @@ typedef struct _CONFIG_PAGE_MANUFACTURING_4 } CONFIG_PAGE_MANUFACTURING_4, MPI_POINTER PTR_CONFIG_PAGE_MANUFACTURING_4, ManufacturingPage4_t, MPI_POINTER pManufacturingPage4_t; -#define MPI_MANUFACTURING4_PAGEVERSION (0x03) +#define MPI_MANUFACTURING4_PAGEVERSION (0x04) /* defines for the Flags field */ +#define MPI_MANPAGE4_FORCE_BAD_BLOCK_TABLE (0x80) +#define MPI_MANPAGE4_FORCE_OFFLINE_FAILOVER (0x40) #define MPI_MANPAGE4_IME_DISABLE (0x20) #define MPI_MANPAGE4_IM_DISABLE (0x10) #define MPI_MANPAGE4_IS_DISABLE (0x08) @@ -668,6 +680,66 @@ typedef struct _CONFIG_PAGE_MANUFACTURING_6 #define MPI_MANUFACTURING6_PAGEVERSION (0x00) +typedef struct _MPI_MANPAGE7_CONNECTOR_INFO +{ + U32 Pinout; /* 00h */ + U8 Connector[16]; /* 04h */ + U8 Location; /* 14h */ + U8 Reserved1; /* 15h */ + U16 Slot; /* 16h */ + U32 Reserved2; /* 18h */ +} MPI_MANPAGE7_CONNECTOR_INFO, MPI_POINTER PTR_MPI_MANPAGE7_CONNECTOR_INFO, + MpiManPage7ConnectorInfo_t, MPI_POINTER pMpiManPage7ConnectorInfo_t; + +/* defines for the Pinout field */ +#define MPI_MANPAGE7_PINOUT_SFF_8484_L4 (0x00080000) +#define MPI_MANPAGE7_PINOUT_SFF_8484_L3 (0x00040000) +#define MPI_MANPAGE7_PINOUT_SFF_8484_L2 (0x00020000) +#define MPI_MANPAGE7_PINOUT_SFF_8484_L1 (0x00010000) +#define MPI_MANPAGE7_PINOUT_SFF_8470_L4 (0x00000800) +#define MPI_MANPAGE7_PINOUT_SFF_8470_L3 (0x00000400) +#define MPI_MANPAGE7_PINOUT_SFF_8470_L2 (0x00000200) +#define MPI_MANPAGE7_PINOUT_SFF_8470_L1 (0x00000100) +#define MPI_MANPAGE7_PINOUT_SFF_8482 (0x00000002) +#define MPI_MANPAGE7_PINOUT_CONNECTION_UNKNOWN (0x00000001) + +/* defines for the Location field */ +#define MPI_MANPAGE7_LOCATION_UNKNOWN (0x01) +#define MPI_MANPAGE7_LOCATION_INTERNAL (0x02) +#define MPI_MANPAGE7_LOCATION_EXTERNAL (0x04) +#define MPI_MANPAGE7_LOCATION_SWITCHABLE (0x08) +#define MPI_MANPAGE7_LOCATION_AUTO (0x10) +#define MPI_MANPAGE7_LOCATION_NOT_PRESENT (0x20) +#define MPI_MANPAGE7_LOCATION_NOT_CONNECTED (0x80) + +/* + * Host code (drivers, BIOS, utilities, etc.) should leave this define set to + * one and check NumPhys at runtime. + */ +#ifndef MPI_MANPAGE7_CONNECTOR_INFO_MAX +#define MPI_MANPAGE7_CONNECTOR_INFO_MAX (1) +#endif + +typedef struct _CONFIG_PAGE_MANUFACTURING_7 +{ + CONFIG_PAGE_HEADER Header; /* 00h */ + U32 Reserved1; /* 04h */ + U32 Reserved2; /* 08h */ + U32 Flags; /* 0Ch */ + U8 EnclosureName[16]; /* 10h */ + U8 NumPhys; /* 20h */ + U8 Reserved3; /* 21h */ + U16 Reserved4; /* 22h */ + MPI_MANPAGE7_CONNECTOR_INFO ConnectorInfo[MPI_MANPAGE7_CONNECTOR_INFO_MAX]; /* 24h */ +} CONFIG_PAGE_MANUFACTURING_7, MPI_POINTER PTR_CONFIG_PAGE_MANUFACTURING_7, + ManufacturingPage7_t, MPI_POINTER pManufacturingPage7_t; + +#define MPI_MANUFACTURING7_PAGEVERSION (0x00) + +/* defines for the Flags field */ +#define MPI_MANPAGE7_FLAG_USE_SLOT_INFO (0x00000001) + + /**************************************************************************** * IO Unit Config Pages ****************************************************************************/ @@ -867,7 +939,7 @@ typedef struct _CONFIG_PAGE_IOC_2 } CONFIG_PAGE_IOC_2, MPI_POINTER PTR_CONFIG_PAGE_IOC_2, IOCPage2_t, MPI_POINTER pIOCPage2_t; -#define MPI_IOCPAGE2_PAGEVERSION (0x03) +#define MPI_IOCPAGE2_PAGEVERSION (0x04) /* IOC Page 2 Capabilities flags */ @@ -878,6 +950,7 @@ typedef struct _CONFIG_PAGE_IOC_2 #define MPI_IOCPAGE2_CAP_FLAGS_RAID_6_SUPPORT (0x00000010) #define MPI_IOCPAGE2_CAP_FLAGS_RAID_10_SUPPORT (0x00000020) #define MPI_IOCPAGE2_CAP_FLAGS_RAID_50_SUPPORT (0x00000040) +#define MPI_IOCPAGE2_CAP_FLAGS_RAID_64_BIT_ADDRESSING (0x10000000) #define MPI_IOCPAGE2_CAP_FLAGS_SES_SUPPORT (0x20000000) #define MPI_IOCPAGE2_CAP_FLAGS_SAFTE_SUPPORT (0x40000000) #define MPI_IOCPAGE2_CAP_FLAGS_CROSS_CHANNEL_SUPPORT (0x80000000) @@ -975,6 +1048,44 @@ typedef struct _CONFIG_PAGE_IOC_5 #define MPI_IOCPAGE5_PAGEVERSION (0x00) +typedef struct _CONFIG_PAGE_IOC_6 +{ + CONFIG_PAGE_HEADER Header; /* 00h */ + U32 CapabilitiesFlags; /* 04h */ + U8 MaxDrivesIS; /* 08h */ + U8 MaxDrivesIM; /* 09h */ + U8 MaxDrivesIME; /* 0Ah */ + U8 Reserved1; /* 0Bh */ + U8 MinDrivesIS; /* 0Ch */ + U8 MinDrivesIM; /* 0Dh */ + U8 MinDrivesIME; /* 0Eh */ + U8 Reserved2; /* 0Fh */ + U8 MaxGlobalHotSpares; /* 10h */ + U8 Reserved3; /* 11h */ + U16 Reserved4; /* 12h */ + U32 Reserved5; /* 14h */ + U32 SupportedStripeSizeMapIS; /* 18h */ + U32 SupportedStripeSizeMapIME; /* 1Ch */ + U32 Reserved6; /* 20h */ + U8 MetadataSize; /* 24h */ + U8 Reserved7; /* 25h */ + U16 Reserved8; /* 26h */ + U16 MaxBadBlockTableEntries; /* 28h */ + U16 Reserved9; /* 2Ah */ + U16 IRNvsramUsage; /* 2Ch */ + U16 Reserved10; /* 2Eh */ + U32 IRNvsramVersion; /* 30h */ + U32 Reserved11; /* 34h */ + U32 Reserved12; /* 38h */ +} CONFIG_PAGE_IOC_6, MPI_POINTER PTR_CONFIG_PAGE_IOC_6, + IOCPage6_t, MPI_POINTER pIOCPage6_t; + +#define MPI_IOCPAGE6_PAGEVERSION (0x00) + +/* IOC Page 6 Capabilities Flags */ + +#define MPI_IOCPAGE6_CAP_FLAGS_GLOBAL_HOT_SPARE (0x00000001) + /**************************************************************************** * BIOS Config Pages @@ -1218,13 +1329,13 @@ typedef struct _CONFIG_PAGE_BIOS_2 U32 Reserved5; /* 14h */ U32 Reserved6; /* 18h */ U8 BootDeviceForm; /* 1Ch */ - U8 Reserved7; /* 1Dh */ + U8 PrevBootDeviceForm; /* 1Ch */ U16 Reserved8; /* 1Eh */ MPI_BIOSPAGE2_BOOT_DEVICE BootDevice; /* 20h */ } CONFIG_PAGE_BIOS_2, MPI_POINTER PTR_CONFIG_PAGE_BIOS_2, BIOSPage2_t, MPI_POINTER pBIOSPage2_t; -#define MPI_BIOSPAGE2_PAGEVERSION (0x01) +#define MPI_BIOSPAGE2_PAGEVERSION (0x02) #define MPI_BIOSPAGE2_FORM_MASK (0x0F) #define MPI_BIOSPAGE2_FORM_ADAPTER_ORDER (0x00) @@ -2080,7 +2191,7 @@ typedef struct _CONFIG_PAGE_RAID_VOL_0 RAID_VOL0_STATUS VolumeStatus; /* 08h */ RAID_VOL0_SETTINGS VolumeSettings; /* 0Ch */ U32 MaxLBA; /* 10h */ - U32 Reserved1; /* 14h */ + U32 MaxLBAHigh; /* 14h */ U32 StripeSize; /* 18h */ U32 Reserved2; /* 1Ch */ U32 Reserved3; /* 20h */ @@ -2092,7 +2203,7 @@ typedef struct _CONFIG_PAGE_RAID_VOL_0 } CONFIG_PAGE_RAID_VOL_0, MPI_POINTER PTR_CONFIG_PAGE_RAID_VOL_0, RaidVolumePage0_t, MPI_POINTER pRaidVolumePage0_t; -#define MPI_RAIDVOLPAGE0_PAGEVERSION (0x05) +#define MPI_RAIDVOLPAGE0_PAGEVERSION (0x06) /* values for RAID Volume Page 0 InactiveStatus field */ #define MPI_RAIDVOLPAGE0_UNKNOWN_INACTIVE (0x00) @@ -2324,7 +2435,8 @@ typedef struct _MPI_SAS_IO_UNIT0_PHY_DATA typedef struct _CONFIG_PAGE_SAS_IO_UNIT_0 { CONFIG_EXTENDED_PAGE_HEADER Header; /* 00h */ - U32 Reserved1; /* 08h */ + U16 NvdataVersionDefault; /* 08h */ + U16 NvdataVersionPersistent; /* 0Ah */ U8 NumPhys; /* 0Ch */ U8 Reserved2; /* 0Dh */ U16 Reserved3; /* 0Eh */ @@ -2332,7 +2444,7 @@ typedef struct _CONFIG_PAGE_SAS_IO_UNIT_0 } CONFIG_PAGE_SAS_IO_UNIT_0, MPI_POINTER PTR_CONFIG_PAGE_SAS_IO_UNIT_0, SasIOUnitPage0_t, MPI_POINTER pSasIOUnitPage0_t; -#define MPI_SASIOUNITPAGE0_PAGEVERSION (0x03) +#define MPI_SASIOUNITPAGE0_PAGEVERSION (0x04) /* values for SAS IO Unit Page 0 PortFlags */ #define MPI_SAS_IOUNIT0_PORT_FLAGS_DISCOVERY_IN_PROGRESS (0x08) @@ -2373,12 +2485,13 @@ typedef struct _CONFIG_PAGE_SAS_IO_UNIT_0 typedef struct _MPI_SAS_IO_UNIT1_PHY_DATA { - U8 Port; /* 00h */ - U8 PortFlags; /* 01h */ - U8 PhyFlags; /* 02h */ - U8 MaxMinLinkRate; /* 03h */ - U32 ControllerPhyDeviceInfo;/* 04h */ - U32 Reserved1; /* 08h */ + U8 Port; /* 00h */ + U8 PortFlags; /* 01h */ + U8 PhyFlags; /* 02h */ + U8 MaxMinLinkRate; /* 03h */ + U32 ControllerPhyDeviceInfo; /* 04h */ + U16 MaxTargetPortConnectTime; /* 08h */ + U16 Reserved1; /* 0Ah */ } MPI_SAS_IO_UNIT1_PHY_DATA, MPI_POINTER PTR_MPI_SAS_IO_UNIT1_PHY_DATA, SasIOUnit1PhyData, MPI_POINTER pSasIOUnit1PhyData; @@ -2395,15 +2508,17 @@ typedef struct _CONFIG_PAGE_SAS_IO_UNIT_1 CONFIG_EXTENDED_PAGE_HEADER Header; /* 00h */ U16 ControlFlags; /* 08h */ U16 MaxNumSATATargets; /* 0Ah */ - U32 Reserved1; /* 0Ch */ + U16 AdditionalControlFlags; /* 0Ch */ + U16 Reserved1; /* 0Eh */ U8 NumPhys; /* 10h */ U8 SATAMaxQDepth; /* 11h */ - U16 Reserved2; /* 12h */ + U8 ReportDeviceMissingDelay; /* 12h */ + U8 IODeviceMissingDelay; /* 13h */ MPI_SAS_IO_UNIT1_PHY_DATA PhyData[MPI_SAS_IOUNIT1_PHY_MAX]; /* 14h */ } CONFIG_PAGE_SAS_IO_UNIT_1, MPI_POINTER PTR_CONFIG_PAGE_SAS_IO_UNIT_1, SasIOUnitPage1_t, MPI_POINTER pSasIOUnitPage1_t; -#define MPI_SASIOUNITPAGE1_PAGEVERSION (0x05) +#define MPI_SASIOUNITPAGE1_PAGEVERSION (0x06) /* values for SAS IO Unit Page 1 ControlFlags */ #define MPI_SAS_IOUNIT1_CONTROL_DEVICE_SELF_TEST (0x8000) @@ -2428,6 +2543,13 @@ typedef struct _CONFIG_PAGE_SAS_IO_UNIT_1 #define MPI_SAS_IOUNIT1_CONTROL_FIRST_LVL_DISC_ONLY (0x0002) #define MPI_SAS_IOUNIT1_CONTROL_CLEAR_AFFILIATION (0x0001) +/* values for SAS IO Unit Page 1 AdditionalControlFlags */ +#define MPI_SAS_IOUNIT1_ACONTROL_ALLOW_TABLE_TO_TABLE (0x0001) + +/* defines for SAS IO Unit Page 1 ReportDeviceMissingDelay */ +#define MPI_SAS_IOUNIT1_REPORT_MISSING_TIMEOUT_MASK (0x7F) +#define MPI_SAS_IOUNIT1_REPORT_MISSING_UNIT_16 (0x80) + /* values for SAS IO Unit Page 1 PortFlags */ #define MPI_SAS_IOUNIT1_PORT_FLAGS_0_TARGET_IOC_NUM (0x00) #define MPI_SAS_IOUNIT1_PORT_FLAGS_1_TARGET_IOC_NUM (0x04) diff --git a/drivers/message/fusion/lsi/mpi_history.txt b/drivers/message/fusion/lsi/mpi_history.txt index 4a5f8dd1d76..582cfe7c2aa 100644 --- a/drivers/message/fusion/lsi/mpi_history.txt +++ b/drivers/message/fusion/lsi/mpi_history.txt @@ -6,25 +6,25 @@ Copyright (c) 2000-2005 LSI Logic Corporation. --------------------------------------- - Header Set Release Version: 01.05.12 - Header Set Release Date: 08-30-05 + Header Set Release Version: 01.05.13 + Header Set Release Date: 03-27-06 --------------------------------------- Filename Current version Prior version ---------- --------------- ------------- - mpi.h 01.05.10 01.05.09 - mpi_ioc.h 01.05.10 01.05.09 - mpi_cnfg.h 01.05.11 01.05.10 - mpi_init.h 01.05.06 01.05.06 - mpi_targ.h 01.05.05 01.05.05 + mpi.h 01.05.11 01.05.10 + mpi_ioc.h 01.05.11 01.05.10 + mpi_cnfg.h 01.05.12 01.05.11 + mpi_init.h 01.05.07 01.05.06 + mpi_targ.h 01.05.06 01.05.05 mpi_fc.h 01.05.01 01.05.01 mpi_lan.h 01.05.01 01.05.01 mpi_raid.h 01.05.02 01.05.02 mpi_tool.h 01.05.03 01.05.03 mpi_inb.h 01.05.01 01.05.01 - mpi_sas.h 01.05.02 01.05.01 - mpi_type.h 01.05.02 01.05.01 - mpi_history.txt 01.05.12 01.05.11 + mpi_sas.h 01.05.03 01.05.02 + mpi_type.h 01.05.02 01.05.02 + mpi_history.txt 01.05.13 01.05.12 * Date Version Description @@ -93,6 +93,7 @@ mpi.h * Added EEDP IOCStatus codes. * 08-03-05 01.05.09 Bumped MPI_HEADER_VERSION_UNIT. * 08-30-05 01.05.10 Added 2 new IOCStatus codes for Target. + * 03-27-06 01.05.11 Bumped MPI_HEADER_VERSION_UNIT. * -------------------------------------------------------------------------- mpi_ioc.h @@ -170,6 +171,17 @@ mpi_ioc.h * Added new ReasonCode value for SAS Device Status Change * event. * Added new family code for FC949E. + * 03-27-06 01.05.11 Added MPI_IOCFACTS_CAPABILITY_TLR. + * Added additional Reason Codes and more event data fields + * to EVENT_DATA_SAS_DEVICE_STATUS_CHANGE. + * Added EVENT_DATA_SAS_BROADCAST_PRIMITIVE structure and + * new event. + * Added MPI_EVENT_SAS_SMP_ERROR and event data structure. + * Added MPI_EVENT_SAS_INIT_DEVICE_STATUS_CHANGE and event + * data structure. + * Added MPI_EVENT_SAS_INIT_TABLE_OVERFLOW and event + * data structure. + * Added MPI_EXT_IMAGE_TYPE_INITIALIZATION. * -------------------------------------------------------------------------- mpi_cnfg.h @@ -425,6 +437,16 @@ mpi_cnfg.h * Added postpone SATA Init bit to SAS IO Unit Page 1 * ControlFlags. * Changed LogEntry format for Log Page 0. + * 03-27-06 01.05.12 Added two new Flags defines for Manufacturing Page 4. + * Added Manufacturing Page 7. + * Added MPI_IOCPAGE2_CAP_FLAGS_RAID_64_BIT_ADDRESSING. + * Added IOC Page 6. + * Added PrevBootDeviceForm field to CONFIG_PAGE_BIOS_2. + * Added MaxLBAHigh field to RAID Volume Page 0. + * Added Nvdata version fields to SAS IO Unit Page 0. + * Added AdditionalControlFlags, MaxTargetPortConnectTime, + * ReportDeviceMissingDelay, and IODeviceMissingDelay + * fields to SAS IO Unit Page 1. * -------------------------------------------------------------------------- mpi_init.h @@ -467,6 +489,7 @@ mpi_init.h * Added four new defines for SEP SlotStatus. * 08-03-05 01.05.06 Fixed some MPI_SCSIIO32_MSGFLGS_ defines to make them * unique in the first 32 characters. + * 03-27-06 01.05.07 Added Task Management type of Clear ACA. * -------------------------------------------------------------------------- mpi_targ.h @@ -511,6 +534,7 @@ mpi_targ.h * 02-22-05 01.05.03 Changed a comment. * 03-11-05 01.05.04 Removed TargetAssistExtended Request. * 06-24-05 01.05.05 Added TargetAssistExtended structures and defines. + * 03-27-06 01.05.06 Added a comment. * -------------------------------------------------------------------------- mpi_fc.h @@ -610,6 +634,10 @@ mpi_sas.h * 08-30-05 01.05.02 Added DeviceInfo bit for SEP. * Added PrimFlags and Primitive field to SAS IO Unit * Control request, and added a new operation code. + * 03-27-06 01.05.03 Added Force Full Discovery, Transmit Port Select Signal, + * and Remove Device operations to SAS IO Unit Control. + * Added DevHandle field to SAS IO Unit Control request and + * reply. * -------------------------------------------------------------------------- mpi_type.h @@ -625,20 +653,20 @@ mpi_type.h mpi_history.txt Parts list history -Filename 01.05.12 01.05.11 01.05.10 01.05.09 ----------- -------- -------- -------- -------- -mpi.h 01.05.10 01.05.09 01.05.08 01.05.07 -mpi_ioc.h 01.05.10 01.05.09 01.05.09 01.05.08 -mpi_cnfg.h 01.05.11 01.05.10 01.05.09 01.05.08 -mpi_init.h 01.05.06 01.05.06 01.05.05 01.05.04 -mpi_targ.h 01.05.05 01.05.05 01.05.05 01.05.04 -mpi_fc.h 01.05.01 01.05.01 01.05.01 01.05.01 -mpi_lan.h 01.05.01 01.05.01 01.05.01 01.05.01 -mpi_raid.h 01.05.02 01.05.02 01.05.02 01.05.02 -mpi_tool.h 01.05.03 01.05.03 01.05.03 01.05.03 -mpi_inb.h 01.05.01 01.05.01 01.05.01 01.05.01 -mpi_sas.h 01.05.02 01.05.01 01.05.01 01.05.01 -mpi_type.h 01.05.02 01.05.01 01.05.01 01.05.01 +Filename 01.05.13 01.05.12 01.05.11 01.05.10 01.05.09 +---------- -------- -------- -------- -------- -------- +mpi.h 01.05.11 01.05.10 01.05.09 01.05.08 01.05.07 +mpi_ioc.h 01.05.11 01.05.10 01.05.09 01.05.09 01.05.08 +mpi_cnfg.h 01.05.12 01.05.11 01.05.10 01.05.09 01.05.08 +mpi_init.h 01.05.07 01.05.06 01.05.06 01.05.05 01.05.04 +mpi_targ.h 01.05.06 01.05.05 01.05.05 01.05.05 01.05.04 +mpi_fc.h 01.05.01 01.05.01 01.05.01 01.05.01 01.05.01 +mpi_lan.h 01.05.01 01.05.01 01.05.01 01.05.01 01.05.01 +mpi_raid.h 01.05.02 01.05.02 01.05.02 01.05.02 01.05.02 +mpi_tool.h 01.05.03 01.05.03 01.05.03 01.05.03 01.05.03 +mpi_inb.h 01.05.01 01.05.01 01.05.01 01.05.01 01.05.01 +mpi_sas.h 01.05.03 01.05.02 01.05.01 01.05.01 01.05.01 +mpi_type.h 01.05.02 01.05.02 01.05.01 01.05.01 01.05.01 Filename 01.05.08 01.05.07 01.05.06 01.05.05 01.05.04 01.05.03 ---------- -------- -------- -------- -------- -------- -------- diff --git a/drivers/message/fusion/lsi/mpi_init.h b/drivers/message/fusion/lsi/mpi_init.h index 68941f459ca..c1c678989a2 100644 --- a/drivers/message/fusion/lsi/mpi_init.h +++ b/drivers/message/fusion/lsi/mpi_init.h @@ -6,7 +6,7 @@ * Title: MPI initiator mode messages and structures * Creation Date: June 8, 2000 * - * mpi_init.h Version: 01.05.06 + * mpi_init.h Version: 01.05.07 * * Version History * --------------- @@ -52,6 +52,7 @@ * Added four new defines for SEP SlotStatus. * 08-03-05 01.05.06 Fixed some MPI_SCSIIO32_MSGFLGS_ defines to make them * unique in the first 32 characters. + * 03-27-06 01.05.07 Added Task Management type of Clear ACA. * -------------------------------------------------------------------------- */ @@ -427,6 +428,7 @@ typedef struct _MSG_SCSI_TASK_MGMT #define MPI_SCSITASKMGMT_TASKTYPE_LOGICAL_UNIT_RESET (0x05) #define MPI_SCSITASKMGMT_TASKTYPE_CLEAR_TASK_SET (0x06) #define MPI_SCSITASKMGMT_TASKTYPE_QUERY_TASK (0x07) +#define MPI_SCSITASKMGMT_TASKTYPE_CLEAR_ACA (0x08) /* MsgFlags bits */ #define MPI_SCSITASKMGMT_MSGFLAGS_TARGET_RESET_OPTION (0x00) diff --git a/drivers/message/fusion/lsi/mpi_ioc.h b/drivers/message/fusion/lsi/mpi_ioc.h index 2c5f43fa7c7..18ba407fd39 100644 --- a/drivers/message/fusion/lsi/mpi_ioc.h +++ b/drivers/message/fusion/lsi/mpi_ioc.h @@ -6,7 +6,7 @@ * Title: MPI IOC, Port, Event, FW Download, and FW Upload messages * Creation Date: August 11, 2000 * - * mpi_ioc.h Version: 01.05.10 + * mpi_ioc.h Version: 01.05.11 * * Version History * --------------- @@ -87,6 +87,17 @@ * Added new ReasonCode value for SAS Device Status Change * event. * Added new family code for FC949E. + * 03-27-06 01.05.11 Added MPI_IOCFACTS_CAPABILITY_TLR. + * Added additional Reason Codes and more event data fields + * to EVENT_DATA_SAS_DEVICE_STATUS_CHANGE. + * Added EVENT_DATA_SAS_BROADCAST_PRIMITIVE structure and + * new event. + * Added MPI_EVENT_SAS_SMP_ERROR and event data structure. + * Added MPI_EVENT_SAS_INIT_DEVICE_STATUS_CHANGE and event + * data structure. + * Added MPI_EVENT_SAS_INIT_TABLE_OVERFLOW and event + * data structure. + * Added MPI_EXT_IMAGE_TYPE_INITIALIZATION. * -------------------------------------------------------------------------- */ @@ -272,6 +283,7 @@ typedef struct _MSG_IOC_FACTS_REPLY #define MPI_IOCFACTS_CAPABILITY_MULTICAST (0x00000100) #define MPI_IOCFACTS_CAPABILITY_SCSIIO32 (0x00000200) #define MPI_IOCFACTS_CAPABILITY_NO_SCSIIO16 (0x00000400) +#define MPI_IOCFACTS_CAPABILITY_TLR (0x00000800) /***************************************************************************** @@ -448,30 +460,34 @@ typedef struct _MSG_EVENT_ACK_REPLY /* Event */ -#define MPI_EVENT_NONE (0x00000000) -#define MPI_EVENT_LOG_DATA (0x00000001) -#define MPI_EVENT_STATE_CHANGE (0x00000002) -#define MPI_EVENT_UNIT_ATTENTION (0x00000003) -#define MPI_EVENT_IOC_BUS_RESET (0x00000004) -#define MPI_EVENT_EXT_BUS_RESET (0x00000005) -#define MPI_EVENT_RESCAN (0x00000006) -#define MPI_EVENT_LINK_STATUS_CHANGE (0x00000007) -#define MPI_EVENT_LOOP_STATE_CHANGE (0x00000008) -#define MPI_EVENT_LOGOUT (0x00000009) -#define MPI_EVENT_EVENT_CHANGE (0x0000000A) -#define MPI_EVENT_INTEGRATED_RAID (0x0000000B) -#define MPI_EVENT_SCSI_DEVICE_STATUS_CHANGE (0x0000000C) -#define MPI_EVENT_ON_BUS_TIMER_EXPIRED (0x0000000D) -#define MPI_EVENT_QUEUE_FULL (0x0000000E) -#define MPI_EVENT_SAS_DEVICE_STATUS_CHANGE (0x0000000F) -#define MPI_EVENT_SAS_SES (0x00000010) -#define MPI_EVENT_PERSISTENT_TABLE_FULL (0x00000011) -#define MPI_EVENT_SAS_PHY_LINK_STATUS (0x00000012) -#define MPI_EVENT_SAS_DISCOVERY_ERROR (0x00000013) -#define MPI_EVENT_IR_RESYNC_UPDATE (0x00000014) -#define MPI_EVENT_IR2 (0x00000015) -#define MPI_EVENT_SAS_DISCOVERY (0x00000016) -#define MPI_EVENT_LOG_ENTRY_ADDED (0x00000021) +#define MPI_EVENT_NONE (0x00000000) +#define MPI_EVENT_LOG_DATA (0x00000001) +#define MPI_EVENT_STATE_CHANGE (0x00000002) +#define MPI_EVENT_UNIT_ATTENTION (0x00000003) +#define MPI_EVENT_IOC_BUS_RESET (0x00000004) +#define MPI_EVENT_EXT_BUS_RESET (0x00000005) +#define MPI_EVENT_RESCAN (0x00000006) +#define MPI_EVENT_LINK_STATUS_CHANGE (0x00000007) +#define MPI_EVENT_LOOP_STATE_CHANGE (0x00000008) +#define MPI_EVENT_LOGOUT (0x00000009) +#define MPI_EVENT_EVENT_CHANGE (0x0000000A) +#define MPI_EVENT_INTEGRATED_RAID (0x0000000B) +#define MPI_EVENT_SCSI_DEVICE_STATUS_CHANGE (0x0000000C) +#define MPI_EVENT_ON_BUS_TIMER_EXPIRED (0x0000000D) +#define MPI_EVENT_QUEUE_FULL (0x0000000E) +#define MPI_EVENT_SAS_DEVICE_STATUS_CHANGE (0x0000000F) +#define MPI_EVENT_SAS_SES (0x00000010) +#define MPI_EVENT_PERSISTENT_TABLE_FULL (0x00000011) +#define MPI_EVENT_SAS_PHY_LINK_STATUS (0x00000012) +#define MPI_EVENT_SAS_DISCOVERY_ERROR (0x00000013) +#define MPI_EVENT_IR_RESYNC_UPDATE (0x00000014) +#define MPI_EVENT_IR2 (0x00000015) +#define MPI_EVENT_SAS_DISCOVERY (0x00000016) +#define MPI_EVENT_SAS_BROADCAST_PRIMITIVE (0x00000017) +#define MPI_EVENT_SAS_INIT_DEVICE_STATUS_CHANGE (0x00000018) +#define MPI_EVENT_SAS_INIT_TABLE_OVERFLOW (0x00000019) +#define MPI_EVENT_SAS_SMP_ERROR (0x0000001A) +#define MPI_EVENT_LOG_ENTRY_ADDED (0x00000021) /* AckRequired field values */ @@ -558,18 +574,25 @@ typedef struct _EVENT_DATA_SAS_DEVICE_STATUS_CHANGE U8 PhyNum; /* 0Eh */ U8 Reserved1; /* 0Fh */ U64 SASAddress; /* 10h */ + U8 LUN[8]; /* 18h */ + U16 TaskTag; /* 20h */ + U16 Reserved2; /* 22h */ } EVENT_DATA_SAS_DEVICE_STATUS_CHANGE, MPI_POINTER PTR_EVENT_DATA_SAS_DEVICE_STATUS_CHANGE, MpiEventDataSasDeviceStatusChange_t, MPI_POINTER pMpiEventDataSasDeviceStatusChange_t; /* MPI SAS Device Status Change Event data ReasonCode values */ -#define MPI_EVENT_SAS_DEV_STAT_RC_ADDED (0x03) -#define MPI_EVENT_SAS_DEV_STAT_RC_NOT_RESPONDING (0x04) -#define MPI_EVENT_SAS_DEV_STAT_RC_SMART_DATA (0x05) -#define MPI_EVENT_SAS_DEV_STAT_RC_NO_PERSIST_ADDED (0x06) -#define MPI_EVENT_SAS_DEV_STAT_RC_UNSUPPORTED (0x07) -#define MPI_EVENT_SAS_DEV_STAT_RC_INTERNAL_DEVICE_RESET (0x08) +#define MPI_EVENT_SAS_DEV_STAT_RC_ADDED (0x03) +#define MPI_EVENT_SAS_DEV_STAT_RC_NOT_RESPONDING (0x04) +#define MPI_EVENT_SAS_DEV_STAT_RC_SMART_DATA (0x05) +#define MPI_EVENT_SAS_DEV_STAT_RC_NO_PERSIST_ADDED (0x06) +#define MPI_EVENT_SAS_DEV_STAT_RC_UNSUPPORTED (0x07) +#define MPI_EVENT_SAS_DEV_STAT_RC_INTERNAL_DEVICE_RESET (0x08) +#define MPI_EVENT_SAS_DEV_STAT_RC_TASK_ABORT_INTERNAL (0x09) +#define MPI_EVENT_SAS_DEV_STAT_RC_ABORT_TASK_SET_INTERNAL (0x0A) +#define MPI_EVENT_SAS_DEV_STAT_RC_CLEAR_TASK_SET_INTERNAL (0x0B) +#define MPI_EVENT_SAS_DEV_STAT_RC_QUERY_TASK_INTERNAL (0x0C) /* SCSI Event data for Queue Full event */ @@ -742,6 +765,27 @@ typedef struct _EVENT_DATA_SAS_SES } EVENT_DATA_SAS_SES, MPI_POINTER PTR_EVENT_DATA_SAS_SES, MpiEventDataSasSes_t, MPI_POINTER pMpiEventDataSasSes_t; +/* SAS Broadcast Primitive Event data */ + +typedef struct _EVENT_DATA_SAS_BROADCAST_PRIMITIVE +{ + U8 PhyNum; /* 00h */ + U8 Port; /* 01h */ + U8 PortWidth; /* 02h */ + U8 Primitive; /* 04h */ +} EVENT_DATA_SAS_BROADCAST_PRIMITIVE, + MPI_POINTER PTR_EVENT_DATA_SAS_BROADCAST_PRIMITIVE, + MpiEventDataSasBroadcastPrimitive_t, + MPI_POINTER pMpiEventDataSasBroadcastPrimitive_t; + +#define MPI_EVENT_PRIMITIVE_CHANGE (0x01) +#define MPI_EVENT_PRIMITIVE_EXPANDER (0x03) +#define MPI_EVENT_PRIMITIVE_RESERVED2 (0x04) +#define MPI_EVENT_PRIMITIVE_RESERVED3 (0x05) +#define MPI_EVENT_PRIMITIVE_RESERVED4 (0x06) +#define MPI_EVENT_PRIMITIVE_CHANGE0_RESERVED (0x07) +#define MPI_EVENT_PRIMITIVE_CHANGE1_RESERVED (0x08) + /* SAS Phy Link Status Event data */ typedef struct _EVENT_DATA_SAS_PHY_LINK_STATUS @@ -804,6 +848,53 @@ typedef struct _EVENT_DATA_DISCOVERY_ERROR #define MPI_EVENT_DSCVRY_ERR_DS_MULTPL_PATHS (0x00000800) #define MPI_EVENT_DSCVRY_ERR_DS_MAX_SATA_TARGETS (0x00001000) +/* SAS SMP Error Event data */ + +typedef struct _EVENT_DATA_SAS_SMP_ERROR +{ + U8 Status; /* 00h */ + U8 Port; /* 01h */ + U8 SMPFunctionResult; /* 02h */ + U8 Reserved1; /* 03h */ + U64 SASAddress; /* 04h */ +} EVENT_DATA_SAS_SMP_ERROR, MPI_POINTER PTR_EVENT_DATA_SAS_SMP_ERROR, + MpiEventDataSasSmpError_t, MPI_POINTER pMpiEventDataSasSmpError_t; + +/* defines for the Status field of the SAS SMP Error event */ +#define MPI_EVENT_SAS_SMP_FUNCTION_RESULT_VALID (0x00) +#define MPI_EVENT_SAS_SMP_CRC_ERROR (0x01) +#define MPI_EVENT_SAS_SMP_TIMEOUT (0x02) +#define MPI_EVENT_SAS_SMP_NO_DESTINATION (0x03) +#define MPI_EVENT_SAS_SMP_BAD_DESTINATION (0x04) + +/* SAS Initiator Device Status Change Event data */ + +typedef struct _EVENT_DATA_SAS_INIT_DEV_STATUS_CHANGE +{ + U8 ReasonCode; /* 00h */ + U8 Port; /* 01h */ + U16 DevHandle; /* 02h */ + U64 SASAddress; /* 04h */ +} EVENT_DATA_SAS_INIT_DEV_STATUS_CHANGE, + MPI_POINTER PTR_EVENT_DATA_SAS_INIT_DEV_STATUS_CHANGE, + MpiEventDataSasInitDevStatusChange_t, + MPI_POINTER pMpiEventDataSasInitDevStatusChange_t; + +/* defines for the ReasonCode field of the SAS Initiator Device Status Change event */ +#define MPI_EVENT_SAS_INIT_RC_ADDED (0x01) + +/* SAS Initiator Device Table Overflow Event data */ + +typedef struct _EVENT_DATA_SAS_INIT_TABLE_OVERFLOW +{ + U8 MaxInit; /* 00h */ + U8 CurrentInit; /* 01h */ + U16 Reserved1; /* 02h */ +} EVENT_DATA_SAS_INIT_TABLE_OVERFLOW, + MPI_POINTER PTR_EVENT_DATA_SAS_INIT_TABLE_OVERFLOW, + MpiEventDataSasInitTableOverflow_t, + MPI_POINTER pMpiEventDataSasInitTableOverflow_t; + /***************************************************************************** * @@ -1013,5 +1104,6 @@ typedef struct _MPI_EXT_IMAGE_HEADER #define MPI_EXT_IMAGE_TYPE_FW (0x01) #define MPI_EXT_IMAGE_TYPE_NVDATA (0x03) #define MPI_EXT_IMAGE_TYPE_BOOTLOADER (0x04) +#define MPI_EXT_IMAGE_TYPE_INITIALIZATION (0x05) #endif diff --git a/drivers/message/fusion/lsi/mpi_log_sas.h b/drivers/message/fusion/lsi/mpi_log_sas.h index a9c14ad132c..871ebc08b70 100644 --- a/drivers/message/fusion/lsi/mpi_log_sas.h +++ b/drivers/message/fusion/lsi/mpi_log_sas.h @@ -13,6 +13,8 @@ #ifndef IOPI_IOCLOGINFO_H_INCLUDED #define IOPI_IOCLOGINFO_H_INCLUDED +#define SAS_LOGINFO_NEXUS_LOSS 0x31170000 +#define SAS_LOGINFO_MASK 0xFFFF0000 /****************************************************************************/ /* IOC LOGINFO defines, 0x00000000 - 0x0FFFFFFF */ @@ -51,6 +53,9 @@ #define IOP_LOGINFO_CODE_CONFIG_INVALID_PAGE_DNM (0x00030500) /* Device Not Mapped */ #define IOP_LOGINFO_CODE_CONFIG_INVALID_PAGE_PERSIST (0x00030600) /* Persistent Page not found */ #define IOP_LOGINFO_CODE_CONFIG_INVALID_PAGE_DEFAULT (0x00030700) /* Default Page not found */ + +#define IOP_LOGINFO_CODE_DIAG_MSG_ERROR (0x00040000) /* Error handling diag msg - or'd with diag status */ + #define IOP_LOGINFO_CODE_TASK_TERMINATED (0x00050000) #define IOP_LOGINFO_CODE_ENCL_MGMT_READ_ACTION_ERR0R (0x00060001) /* Read Action not supported for SEP msg */ @@ -103,6 +108,7 @@ #define PL_LOGINFO_CODE_IO_EXECUTED (0x00140000) #define PL_LOGINFO_CODE_PERS_RESV_OUT_NOT_AFFIL_OWNER (0x00150000) #define PL_LOGINFO_CODE_OPEN_TXDMA_ABORT (0x00160000) +#define PL_LOGINFO_CODE_IO_DEVICE_MISSING_DELAY_RETRY (0x00170000) #define PL_LOGINFO_SUB_CODE_OPEN_FAILURE (0x00000100) #define PL_LOGINFO_SUB_CODE_OPEN_FAILURE_NO_DEST_TIMEOUT (0x00000101) #define PL_LOGINFO_SUB_CODE_OPEN_FAILURE_ORR_TIMEOUT (0x0000011A) /* Open Reject (Retry) Timeout */ @@ -165,11 +171,81 @@ /****************************************************************************/ /* IR LOGINFO_CODE defines, valid if IOC_LOGINFO_ORIGINATOR = IR */ /****************************************************************************/ -#define IR_LOGINFO_CODE_UNUSED1 (0x00010000) -#define IR_LOGINFO_CODE_UNUSED2 (0x00020000) +#define IR_LOGINFO_RAID_ACTION_ERROR (0x00010000) +#define IR_LOGINFO_CODE_UNUSED2 (0x00020000) + +/* Amount of information passed down for Create Volume is too large */ +#define IR_LOGINFO_VOLUME_CREATE_INVALID_LENGTH (0x00010001) +/* Creation of duplicate volume attempted (Bus/Target ID checked) */ +#define IR_LOGINFO_VOLUME_CREATE_DUPLICATE (0x00010002) +/* Creation failed due to maximum number of supported volumes exceeded */ +#define IR_LOGINFO_VOLUME_CREATE_NO_SLOTS (0x00010003) +/* Creation failed due to DMA error in trying to read from host */ +#define IR_LOGINFO_VOLUME_CREATE_DMA_ERROR (0x00010004) +/* Creation failed due to invalid volume type passed down */ +#define IR_LOGINFO_VOLUME_CREATE_INVALID_VOLUME_TYPE (0x00010005) +/* Creation failed due to error reading MFG Page 4 */ +#define IR_LOGINFO_VOLUME_MFG_PAGE4_ERROR (0x00010006) +/* Creation failed when trying to create internal structures */ +#define IR_LOGINFO_VOLUME_INTERNAL_CONFIG_STRUCTURE_ERROR (0x00010007) + +/* Activation failed due to trying to activate an already active volume */ +#define IR_LOGINFO_VOLUME_ACTIVATING_AN_ACTIVE_VOLUME (0x00010010) +/* Activation failed due to trying to active unsupported volume type */ +#define IR_LOGINFO_VOLUME_ACTIVATING_INVALID_VOLUME_TYPE (0x00010011) +/* Activation failed due to trying to active too many volumes */ +#define IR_LOGINFO_VOLUME_ACTIVATING_TOO_MANY_VOLUMES (0x00010012) +/* Activation failed due to Volume ID in use already */ +#define IR_LOGINFO_VOLUME_ACTIVATING_VOLUME_ID_IN_USE (0x00010013) +/* Activation failed call to activateVolume returned failure */ +#define IR_LOGINFO_VOLUME_ACTIVATE_VOLUME_FAILED (0x00010014) +/* Activation failed trying to import the volume */ +#define IR_LOGINFO_VOLUME_ACTIVATING_IMPORT_VOLUME_FAILED (0x00010015) + +/* Phys Disk failed, too many phys disks */ +#define IR_LOGINFO_PHYSDISK_CREATE_TOO_MANY_DISKS (0x00010020) +/* Amount of information passed down for Create Pnysdisk is too large */ +#define IR_LOGINFO_PHYSDISK_CREATE_INVALID_LENGTH (0x00010021) +/* Creation failed due to DMA error in trying to read from host */ +#define IR_LOGINFO_PHYSDISK_CREATE_DMA_ERROR (0x00010022) +/* Creation failed due to invalid Bus TargetID passed down */ +#define IR_LOGINFO_PHYSDISK_CREATE_BUS_TID_INVALID (0x00010023) +/* Creation failed due to error in creating RAID Phys Disk Config Page */ +#define IR_LOGINFO_PHYSDISK_CREATE_CONFIG_PAGE_ERROR (0x00010024) + + +/* Compatibility Error : IR Disabled */ +#define IR_LOGINFO_COMPAT_ERROR_RAID_DISABLED (0x00010030) +/* Compatibility Error : Inquiry Comand failed */ +#define IR_LOGINFO_COMPAT_ERROR_INQUIRY_FAILED (0x00010031) +/* Compatibility Error : Device not direct access device */ +#define IR_LOGINFO_COMPAT_ERROR_NOT_DIRECT_ACCESS (0x00010032) +/* Compatibility Error : Removable device found */ +#define IR_LOGINFO_COMPAT_ERROR_REMOVABLE_FOUND (0x00010033) +/* Compatibility Error : Device SCSI Version not 2 or higher */ +#define IR_LOGINFO_COMPAT_ERROR_NEED_SCSI_2_OR_HIGHER (0x00010034) +/* Compatibility Error : SATA device, 48 BIT LBA not supported */ +#define IR_LOGINFO_COMPAT_ERROR_SATA_48BIT_LBA_NOT_SUPPORTED (0x00010035) +/* Compatibility Error : Device does not have 512 byte block sizes */ +#define IR_LOGINFO_COMPAT_ERROR_DEVICE_NOT_512_BYTE_BLOCK (0x00010036) +/* Compatibility Error : Volume Type check failed */ +#define IR_LOGINFO_COMPAT_ERROR_VOLUME_TYPE_CHECK_FAILED (0x00010037) +/* Compatibility Error : Volume Type is unsupported by FW */ +#define IR_LOGINFO_COMPAT_ERROR_UNSUPPORTED_VOLUME_TYPE (0x00010038) +/* Compatibility Error : Disk drive too small for use in volume */ +#define IR_LOGINFO_COMPAT_ERROR_DISK_TOO_SMALL (0x00010039) +/* Compatibility Error : Phys disk for Create Volume not found */ +#define IR_LOGINFO_COMPAT_ERROR_PHYS_DISK_NOT_FOUND (0x0001003A) +/* Compatibility Error : membership count error, too many or too few disks for volume type */ +#define IR_LOGINFO_COMPAT_ERROR_MEMBERSHIP_COUNT (0x0001003B) +/* Compatibility Error : Disk stripe sizes must be 64KB */ +#define IR_LOGINFO_COMPAT_ERROR_NON_64K_STRIPE_SIZE (0x0001003C) +/* Compatibility Error : IME size limited to < 2TB */ +#define IR_LOGINFO_COMPAT_ERROR_IME_VOL_NOT_CURRENTLY_SUPPORTED (0x0001003D) + /****************************************************************************/ -/* Defines for convienence */ +/* Defines for convenience */ /****************************************************************************/ #define IOC_LOGINFO_PREFIX_IOP ((MPI_IOCLOGINFO_TYPE_SAS << MPI_IOCLOGINFO_TYPE_SHIFT) | IOC_LOGINFO_ORIGINATOR_IOP) #define IOC_LOGINFO_PREFIX_PL ((MPI_IOCLOGINFO_TYPE_SAS << MPI_IOCLOGINFO_TYPE_SHIFT) | IOC_LOGINFO_ORIGINATOR_PL) diff --git a/drivers/message/fusion/lsi/mpi_sas.h b/drivers/message/fusion/lsi/mpi_sas.h index 70514867bdd..50b8f0a8f45 100644 --- a/drivers/message/fusion/lsi/mpi_sas.h +++ b/drivers/message/fusion/lsi/mpi_sas.h @@ -6,7 +6,7 @@ * Title: MPI Serial Attached SCSI structures and definitions * Creation Date: August 19, 2004 * - * mpi_sas.h Version: 01.05.02 + * mpi_sas.h Version: 01.05.03 * * Version History * --------------- @@ -17,6 +17,10 @@ * 08-30-05 01.05.02 Added DeviceInfo bit for SEP. * Added PrimFlags and Primitive field to SAS IO Unit * Control request, and added a new operation code. + * 03-27-06 01.05.03 Added Force Full Discovery, Transmit Port Select Signal, + * and Remove Device operations to SAS IO Unit Control. + * Added DevHandle field to SAS IO Unit Control request and + * reply. * -------------------------------------------------------------------------- */ @@ -209,7 +213,7 @@ typedef struct _MSG_SAS_IOUNIT_CONTROL_REQUEST U8 Reserved1; /* 01h */ U8 ChainOffset; /* 02h */ U8 Function; /* 03h */ - U16 Reserved2; /* 04h */ + U16 DevHandle; /* 04h */ U8 Reserved3; /* 06h */ U8 MsgFlags; /* 07h */ U32 MsgContext; /* 08h */ @@ -231,6 +235,9 @@ typedef struct _MSG_SAS_IOUNIT_CONTROL_REQUEST #define MPI_SAS_OP_PHY_CLEAR_ERROR_LOG (0x08) #define MPI_SAS_OP_MAP_CURRENT (0x09) #define MPI_SAS_OP_SEND_PRIMITIVE (0x0A) +#define MPI_SAS_OP_FORCE_FULL_DISCOVERY (0x0B) +#define MPI_SAS_OP_TRANSMIT_PORT_SELECT_SIGNAL (0x0C) +#define MPI_SAS_OP_TRANSMIT_REMOVE_DEVICE (0x0D) /* values for the PrimFlags field */ #define MPI_SAS_PRIMFLAGS_SINGLE (0x08) @@ -245,7 +252,7 @@ typedef struct _MSG_SAS_IOUNIT_CONTROL_REPLY U8 Reserved1; /* 01h */ U8 MsgLength; /* 02h */ U8 Function; /* 03h */ - U16 Reserved2; /* 04h */ + U16 DevHandle; /* 04h */ U8 Reserved3; /* 06h */ U8 MsgFlags; /* 07h */ U32 MsgContext; /* 08h */ diff --git a/drivers/message/fusion/lsi/mpi_targ.h b/drivers/message/fusion/lsi/mpi_targ.h index 3f462859cee..20b66731577 100644 --- a/drivers/message/fusion/lsi/mpi_targ.h +++ b/drivers/message/fusion/lsi/mpi_targ.h @@ -6,7 +6,7 @@ * Title: MPI Target mode messages and structures * Creation Date: June 22, 2000 * - * mpi_targ.h Version: 01.05.05 + * mpi_targ.h Version: 01.05.06 * * Version History * --------------- @@ -54,6 +54,7 @@ * 02-22-05 01.05.03 Changed a comment. * 03-11-05 01.05.04 Removed TargetAssistExtended Request. * 06-24-05 01.05.05 Added TargetAssistExtended structures and defines. + * 03-27-06 01.05.06 Added a comment. * -------------------------------------------------------------------------- */ @@ -351,7 +352,7 @@ typedef struct _MSG_TARGET_ASSIST_REQUEST #define TARGET_ASSIST_FLAGS_CONFIRMED (0x08) #define TARGET_ASSIST_FLAGS_REPOST_CMD_BUFFER (0x80) - +/* Standard Target Mode Reply message */ typedef struct _MSG_TARGET_ERROR_REPLY { U16 Reserved; /* 00h */ diff --git a/drivers/message/fusion/mptbase.c b/drivers/message/fusion/mptbase.c index 57543603d6c..43308df6462 100644 --- a/drivers/message/fusion/mptbase.c +++ b/drivers/message/fusion/mptbase.c @@ -368,20 +368,21 @@ static irqreturn_t mpt_interrupt(int irq, void *bus_id, struct pt_regs *r) { MPT_ADAPTER *ioc = bus_id; - u32 pa; + u32 pa = CHIPREG_READ32_dmasync(&ioc->chip->ReplyFifo); + + if (pa == 0xFFFFFFFF) + return IRQ_NONE; /* * Drain the reply FIFO! */ - while (1) { - pa = CHIPREG_READ32_dmasync(&ioc->chip->ReplyFifo); - if (pa == 0xFFFFFFFF) - return IRQ_HANDLED; - else if (pa & MPI_ADDRESS_REPLY_A_BIT) + do { + if (pa & MPI_ADDRESS_REPLY_A_BIT) mpt_reply(ioc, pa); else mpt_turbo_reply(ioc, pa); - } + pa = CHIPREG_READ32_dmasync(&ioc->chip->ReplyFifo); + } while (pa != 0xFFFFFFFF); return IRQ_HANDLED; } @@ -1219,31 +1220,25 @@ mpt_attach(struct pci_dev *pdev, const struct pci_device_id *id) port = psize = 0; for (ii=0; ii < DEVICE_COUNT_RESOURCE; ii++) { if (pci_resource_flags(pdev, ii) & PCI_BASE_ADDRESS_SPACE_IO) { + if (psize) + continue; /* Get I/O space! */ port = pci_resource_start(pdev, ii); psize = pci_resource_len(pdev,ii); } else { + if (msize) + continue; /* Get memmap */ mem_phys = pci_resource_start(pdev, ii); msize = pci_resource_len(pdev,ii); - break; } } ioc->mem_size = msize; - if (ii == DEVICE_COUNT_RESOURCE) { - printk(KERN_ERR MYNAM ": ERROR - MPT adapter has no memory regions defined!\n"); - kfree(ioc); - return -EINVAL; - } - - dinitprintk((KERN_INFO MYNAM ": MPT adapter @ %lx, msize=%dd bytes\n", mem_phys, msize)); - dinitprintk((KERN_INFO MYNAM ": (port i/o @ %lx, psize=%dd bytes)\n", port, psize)); - mem = NULL; /* Get logical ptr for PciMem0 space */ /*mem = ioremap(mem_phys, msize);*/ - mem = ioremap(mem_phys, 0x100); + mem = ioremap(mem_phys, msize); if (mem == NULL) { printk(KERN_ERR MYNAM ": ERROR - Unable to map adapter memory!\n"); kfree(ioc); @@ -1343,11 +1338,6 @@ mpt_attach(struct pci_dev *pdev, const struct pci_device_id *id) ioc->bus_type = SAS; ioc->errata_flag_1064 = 1; } - else if (pdev->device == MPI_MANUFACTPAGE_DEVID_SAS1066) { - ioc->prod_name = "LSISAS1066"; - ioc->bus_type = SAS; - ioc->errata_flag_1064 = 1; - } else if (pdev->device == MPI_MANUFACTPAGE_DEVID_SAS1068) { ioc->prod_name = "LSISAS1068"; ioc->bus_type = SAS; @@ -1357,14 +1347,14 @@ mpt_attach(struct pci_dev *pdev, const struct pci_device_id *id) ioc->prod_name = "LSISAS1064E"; ioc->bus_type = SAS; } - else if (pdev->device == MPI_MANUFACTPAGE_DEVID_SAS1066E) { - ioc->prod_name = "LSISAS1066E"; - ioc->bus_type = SAS; - } else if (pdev->device == MPI_MANUFACTPAGE_DEVID_SAS1068E) { ioc->prod_name = "LSISAS1068E"; ioc->bus_type = SAS; } + else if (pdev->device == MPI_MANUFACTPAGE_DEVID_SAS1078) { + ioc->prod_name = "LSISAS1078"; + ioc->bus_type = SAS; + } if (ioc->errata_flag_1064) pci_disable_io_access(pdev); @@ -3184,6 +3174,37 @@ mpt_diag_reset(MPT_ADAPTER *ioc, int ignore, int sleepFlag) u32 diag1val = 0; #endif + if (ioc->pcidev->device == MPI_MANUFACTPAGE_DEVID_SAS1078) { + drsprintk((MYIOC_s_WARN_FMT "%s: Doorbell=%p; 1078 reset " + "address=%p\n", ioc->name, __FUNCTION__, + &ioc->chip->Doorbell, &ioc->chip->Reset_1078)); + CHIPREG_WRITE32(&ioc->chip->Reset_1078, 0x07); + if (sleepFlag == CAN_SLEEP) + msleep(1); + else + mdelay(1); + + for (count = 0; count < 60; count ++) { + doorbell = CHIPREG_READ32(&ioc->chip->Doorbell); + doorbell &= MPI_IOC_STATE_MASK; + + drsprintk((MYIOC_s_INFO_FMT + "looking for READY STATE: doorbell=%x" + " count=%d\n", + ioc->name, doorbell, count)); + if (doorbell == MPI_IOC_STATE_READY) { + return 0; + } + + /* wait 1 sec */ + if (sleepFlag == CAN_SLEEP) + msleep(1000); + else + mdelay(1000); + } + return -1; + } + /* Clear any existing interrupts */ CHIPREG_WRITE32(&ioc->chip->IntStatus, 0); diff --git a/drivers/message/fusion/mptbase.h b/drivers/message/fusion/mptbase.h index 32ae4d66454..a5ce10b67d0 100644 --- a/drivers/message/fusion/mptbase.h +++ b/drivers/message/fusion/mptbase.h @@ -75,8 +75,8 @@ #define COPYRIGHT "Copyright (c) 1999-2005 " MODULEAUTHOR #endif -#define MPT_LINUX_VERSION_COMMON "3.03.10" -#define MPT_LINUX_PACKAGE_NAME "@(#)mptlinux-3.03.10" +#define MPT_LINUX_VERSION_COMMON "3.04.00" +#define MPT_LINUX_PACKAGE_NAME "@(#)mptlinux-3.04.00" #define WHAT_MAGIC_STRING "@" "(" "#" ")" #define show_mptmod_ver(s,ver) \ @@ -307,7 +307,8 @@ typedef struct _SYSIF_REGS u32 HostIndex; /* 50 Host Index register */ u32 Reserved4[15]; /* 54-8F */ u32 Fubar; /* 90 For Fubar usage */ - u32 Reserved5[27]; /* 94-FF */ + u32 Reserved5[1050];/* 94-10F8 */ + u32 Reset_1078; /* 10FC Reset 1078 */ } SYSIF_REGS; /* @@ -341,6 +342,7 @@ typedef struct _VirtTarget { u8 negoFlags; /* bit field, see above */ u8 raidVolume; /* set, if RAID Volume */ u8 type; /* byte 0 of Inquiry data */ + u8 deleted; /* target in process of being removed */ u32 num_luns; u32 luns[8]; /* Max LUNs is 256 */ } VirtTarget; @@ -629,10 +631,11 @@ typedef struct _MPT_ADAPTER struct mutex sas_discovery_mutex; u8 sas_discovery_runtime; u8 sas_discovery_ignore_events; + u16 handle; int sas_index; /* index refrencing */ MPT_SAS_MGMT sas_mgmt; int num_ports; - struct work_struct mptscsih_persistTask; + struct work_struct sas_persist_task; struct work_struct fc_setup_reset_work; struct list_head fc_rports; @@ -641,6 +644,7 @@ typedef struct _MPT_ADAPTER struct work_struct fc_rescan_work; char fc_rescan_work_q_name[KOBJ_NAME_LEN]; struct workqueue_struct *fc_rescan_work_q; + u8 port_serial_number; } MPT_ADAPTER; /* @@ -892,6 +896,13 @@ typedef struct _mpt_sge { #define DBG_DUMP_REQUEST_FRAME_HDR(mfp) #endif +// debug sas wide ports +#ifdef MPT_DEBUG_SAS_WIDE +#define dsaswideprintk(x) printk x +#else +#define dsaswideprintk(x) +#endif + /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ diff --git a/drivers/message/fusion/mptfc.c b/drivers/message/fusion/mptfc.c index 3ff8378ea66..a8f2fa98545 100644 --- a/drivers/message/fusion/mptfc.c +++ b/drivers/message/fusion/mptfc.c @@ -132,21 +132,21 @@ static struct scsi_host_template mptfc_driver_template = { */ static struct pci_device_id mptfc_pci_table[] = { - { PCI_VENDOR_ID_LSI_LOGIC, PCI_DEVICE_ID_LSI_FC909, + { PCI_VENDOR_ID_LSI_LOGIC, MPI_MANUFACTPAGE_DEVICEID_FC909, PCI_ANY_ID, PCI_ANY_ID }, - { PCI_VENDOR_ID_LSI_LOGIC, PCI_DEVICE_ID_LSI_FC919, + { PCI_VENDOR_ID_LSI_LOGIC, MPI_MANUFACTPAGE_DEVICEID_FC919, PCI_ANY_ID, PCI_ANY_ID }, - { PCI_VENDOR_ID_LSI_LOGIC, PCI_DEVICE_ID_LSI_FC929, + { PCI_VENDOR_ID_LSI_LOGIC, MPI_MANUFACTPAGE_DEVICEID_FC929, PCI_ANY_ID, PCI_ANY_ID }, - { PCI_VENDOR_ID_LSI_LOGIC, PCI_DEVICE_ID_LSI_FC919X, + { PCI_VENDOR_ID_LSI_LOGIC, MPI_MANUFACTPAGE_DEVICEID_FC919X, PCI_ANY_ID, PCI_ANY_ID }, - { PCI_VENDOR_ID_LSI_LOGIC, PCI_DEVICE_ID_LSI_FC929X, + { PCI_VENDOR_ID_LSI_LOGIC, MPI_MANUFACTPAGE_DEVICEID_FC929X, PCI_ANY_ID, PCI_ANY_ID }, - { PCI_VENDOR_ID_LSI_LOGIC, PCI_DEVICE_ID_LSI_FC939X, + { PCI_VENDOR_ID_LSI_LOGIC, MPI_MANUFACTPAGE_DEVICEID_FC939X, PCI_ANY_ID, PCI_ANY_ID }, - { PCI_VENDOR_ID_LSI_LOGIC, PCI_DEVICE_ID_LSI_FC949X, + { PCI_VENDOR_ID_LSI_LOGIC, MPI_MANUFACTPAGE_DEVICEID_FC949X, PCI_ANY_ID, PCI_ANY_ID }, - { PCI_VENDOR_ID_LSI_LOGIC, PCI_DEVICE_ID_LSI_FC949ES, + { PCI_VENDOR_ID_LSI_LOGIC, MPI_MANUFACTPAGE_DEVICEID_FC949E, PCI_ANY_ID, PCI_ANY_ID }, {0} /* Terminating entry */ }; diff --git a/drivers/message/fusion/mptsas.c b/drivers/message/fusion/mptsas.c index 85689ab46cb..f7bd8b11ed3 100644 --- a/drivers/message/fusion/mptsas.c +++ b/drivers/message/fusion/mptsas.c @@ -50,11 +50,14 @@ #include <linux/errno.h> #include <linux/sched.h> #include <linux/workqueue.h> +#include <linux/delay.h> /* for mdelay */ +#include <scsi/scsi.h> #include <scsi/scsi_cmnd.h> #include <scsi/scsi_device.h> #include <scsi/scsi_host.h> #include <scsi/scsi_transport_sas.h> +#include <scsi/scsi_dbg.h> #include "mptbase.h" #include "mptscsih.h" @@ -137,23 +140,37 @@ struct mptsas_devinfo { u32 device_info; /* bitfield detailed info about this device */ }; +/* + * Specific details on ports, wide/narrow + */ +struct mptsas_portinfo_details{ + u8 port_id; /* port number provided to transport */ + u16 num_phys; /* number of phys belong to this port */ + u64 phy_bitmask; /* TODO, extend support for 255 phys */ + struct sas_rphy *rphy; /* transport layer rphy object */ + struct sas_port *port; /* transport layer port object */ + struct scsi_target *starget; + struct mptsas_portinfo *port_info; +}; + struct mptsas_phyinfo { u8 phy_id; /* phy index */ - u8 port_id; /* port number this phy is part of */ + u8 port_id; /* firmware port identifier */ u8 negotiated_link_rate; /* nego'd link rate for this phy */ u8 hw_link_rate; /* hardware max/min phys link rate */ u8 programmed_link_rate; /* programmed max/min phy link rate */ + u8 sas_port_add_phy; /* flag to request sas_port_add_phy*/ struct mptsas_devinfo identify; /* point to phy device info */ struct mptsas_devinfo attached; /* point to attached device info */ - struct sas_phy *phy; - struct sas_rphy *rphy; - struct scsi_target *starget; + struct sas_phy *phy; /* transport layer phy object */ + struct mptsas_portinfo *portinfo; + struct mptsas_portinfo_details * port_details; }; struct mptsas_portinfo { struct list_head list; u16 handle; /* unique id to address this */ - u8 num_phys; /* number of phys */ + u16 num_phys; /* number of phys */ struct mptsas_phyinfo *phy_info; }; @@ -169,7 +186,7 @@ struct mptsas_enclosure { u8 sep_channel; /* SEP channel logical channel id */ }; -#ifdef SASDEBUG +#ifdef MPT_DEBUG_SAS static void mptsas_print_phy_data(MPI_SAS_IO_UNIT0_PHY_DATA *phy_data) { printk("---- IO UNIT PAGE 0 ------------\n"); @@ -305,7 +322,7 @@ mptsas_find_portinfo_by_handle(MPT_ADAPTER *ioc, u16 handle) static inline int mptsas_is_end_device(struct mptsas_devinfo * attached) { - if ((attached->handle) && + if ((attached->sas_address) && (attached->device_info & MPI_SAS_DEVICE_INFO_END_DEVICE) && ((attached->device_info & @@ -319,6 +336,253 @@ mptsas_is_end_device(struct mptsas_devinfo * attached) return 0; } +/* no mutex */ +static void +mptsas_port_delete(struct mptsas_portinfo_details * port_details) +{ + struct mptsas_portinfo *port_info; + struct mptsas_phyinfo *phy_info; + u8 i; + + if (!port_details) + return; + + port_info = port_details->port_info; + phy_info = port_info->phy_info; + + dsaswideprintk((KERN_DEBUG "%s: [%p]: port=%02d num_phys=%02d " + "bitmask=0x%016llX\n", + __FUNCTION__, port_details, port_details->port_id, + port_details->num_phys, port_details->phy_bitmask)); + + for (i = 0; i < port_info->num_phys; i++, phy_info++) { + if(phy_info->port_details != port_details) + continue; + memset(&phy_info->attached, 0, sizeof(struct mptsas_devinfo)); + phy_info->port_details = NULL; + } + kfree(port_details); +} + +static inline struct sas_rphy * +mptsas_get_rphy(struct mptsas_phyinfo *phy_info) +{ + if (phy_info->port_details) + return phy_info->port_details->rphy; + else + return NULL; +} + +static inline void +mptsas_set_rphy(struct mptsas_phyinfo *phy_info, struct sas_rphy *rphy) +{ + if (phy_info->port_details) { + phy_info->port_details->rphy = rphy; + dsaswideprintk((KERN_DEBUG "sas_rphy_add: rphy=%p\n", rphy)); + } + +#ifdef MPT_DEBUG_SAS_WIDE + if (rphy) { + dev_printk(KERN_DEBUG, &rphy->dev, "add:"); + printk("rphy=%p release=%p\n", + rphy, rphy->dev.release); + } +#endif +} + +static inline struct sas_port * +mptsas_get_port(struct mptsas_phyinfo *phy_info) +{ + if (phy_info->port_details) + return phy_info->port_details->port; + else + return NULL; +} + +static inline void +mptsas_set_port(struct mptsas_phyinfo *phy_info, struct sas_port *port) +{ + if (phy_info->port_details) + phy_info->port_details->port = port; + +#ifdef MPT_DEBUG_SAS_WIDE + if (port) { + dev_printk(KERN_DEBUG, &port->dev, "add: "); + printk("port=%p release=%p\n", + port, port->dev.release); + } +#endif +} + +static inline struct scsi_target * +mptsas_get_starget(struct mptsas_phyinfo *phy_info) +{ + if (phy_info->port_details) + return phy_info->port_details->starget; + else + return NULL; +} + +static inline void +mptsas_set_starget(struct mptsas_phyinfo *phy_info, struct scsi_target * +starget) +{ + if (phy_info->port_details) + phy_info->port_details->starget = starget; +} + + +/* + * mptsas_setup_wide_ports + * + * Updates for new and existing narrow/wide port configuration + * in the sas_topology + */ +static void +mptsas_setup_wide_ports(MPT_ADAPTER *ioc, struct mptsas_portinfo *port_info) +{ + struct mptsas_portinfo_details * port_details; + struct mptsas_phyinfo *phy_info, *phy_info_cmp; + u64 sas_address; + int i, j; + + mutex_lock(&ioc->sas_topology_mutex); + + phy_info = port_info->phy_info; + for (i = 0 ; i < port_info->num_phys ; i++, phy_info++) { + if (phy_info->attached.handle) + continue; + port_details = phy_info->port_details; + if (!port_details) + continue; + if (port_details->num_phys < 2) + continue; + /* + * Removing a phy from a port, letting the last + * phy be removed by firmware events. + */ + dsaswideprintk((KERN_DEBUG + "%s: [%p]: port=%d deleting phy = %d\n", + __FUNCTION__, port_details, + port_details->port_id, i)); + port_details->num_phys--; + port_details->phy_bitmask &= ~ (1 << phy_info->phy_id); + memset(&phy_info->attached, 0, sizeof(struct mptsas_devinfo)); + sas_port_delete_phy(port_details->port, phy_info->phy); + phy_info->port_details = NULL; + } + + /* + * Populate and refresh the tree + */ + phy_info = port_info->phy_info; + for (i = 0 ; i < port_info->num_phys ; i++, phy_info++) { + sas_address = phy_info->attached.sas_address; + dsaswideprintk((KERN_DEBUG "phy_id=%d sas_address=0x%018llX\n", + i, sas_address)); + if (!sas_address) + continue; + port_details = phy_info->port_details; + /* + * Forming a port + */ + if (!port_details) { + port_details = kzalloc(sizeof(*port_details), + GFP_KERNEL); + if (!port_details) + goto out; + port_details->num_phys = 1; + port_details->port_info = port_info; + port_details->port_id = ioc->port_serial_number++; + if (phy_info->phy_id < 64 ) + port_details->phy_bitmask |= + (1 << phy_info->phy_id); + phy_info->sas_port_add_phy=1; + dsaswideprintk((KERN_DEBUG "\t\tForming port\n\t\t" + "phy_id=%d sas_address=0x%018llX\n", + i, sas_address)); + phy_info->port_details = port_details; + } + + if (i == port_info->num_phys - 1) + continue; + phy_info_cmp = &port_info->phy_info[i + 1]; + for (j = i + 1 ; j < port_info->num_phys ; j++, + phy_info_cmp++) { + if (!phy_info_cmp->attached.sas_address) + continue; + if (sas_address != phy_info_cmp->attached.sas_address) + continue; + if (phy_info_cmp->port_details == port_details ) + continue; + dsaswideprintk((KERN_DEBUG + "\t\tphy_id=%d sas_address=0x%018llX\n", + j, phy_info_cmp->attached.sas_address)); + if (phy_info_cmp->port_details) { + port_details->rphy = + mptsas_get_rphy(phy_info_cmp); + port_details->port = + mptsas_get_port(phy_info_cmp); + port_details->starget = + mptsas_get_starget(phy_info_cmp); + port_details->port_id = + phy_info_cmp->port_details->port_id; + port_details->num_phys = + phy_info_cmp->port_details->num_phys; +// port_info->port_serial_number--; + ioc->port_serial_number--; + if (!phy_info_cmp->port_details->num_phys) + kfree(phy_info_cmp->port_details); + } else + phy_info_cmp->sas_port_add_phy=1; + /* + * Adding a phy to a port + */ + phy_info_cmp->port_details = port_details; + if (phy_info_cmp->phy_id < 64 ) + port_details->phy_bitmask |= + (1 << phy_info_cmp->phy_id); + port_details->num_phys++; + } + } + + out: + +#ifdef MPT_DEBUG_SAS_WIDE + for (i = 0; i < port_info->num_phys; i++) { + port_details = port_info->phy_info[i].port_details; + if (!port_details) + continue; + dsaswideprintk((KERN_DEBUG + "%s: [%p]: phy_id=%02d port_id=%02d num_phys=%02d " + "bitmask=0x%016llX\n", + __FUNCTION__, + port_details, i, port_details->port_id, + port_details->num_phys, port_details->phy_bitmask)); + dsaswideprintk((KERN_DEBUG"\t\tport = %p rphy=%p\n", + port_details->port, port_details->rphy)); + } + dsaswideprintk((KERN_DEBUG"\n")); +#endif + mutex_unlock(&ioc->sas_topology_mutex); +} + +static void +mptsas_target_reset(MPT_ADAPTER *ioc, VirtTarget * vtarget) +{ + MPT_SCSI_HOST *hd = (MPT_SCSI_HOST *)ioc->sh->hostdata; + + if (mptscsih_TMHandler(hd, + MPI_SCSITASKMGMT_TASKTYPE_TARGET_RESET, + vtarget->bus_id, vtarget->target_id, 0, 0, 5) < 0) { + hd->tmPending = 0; + hd->tmState = TM_STATE_NONE; + printk(MYIOC_s_WARN_FMT + "Error processing TaskMgmt id=%d TARGET_RESET\n", + ioc->name, vtarget->target_id); + } +} + static int mptsas_sas_enclosure_pg0(MPT_ADAPTER *ioc, struct mptsas_enclosure *enclosure, u32 form, u32 form_specific) @@ -400,11 +664,105 @@ mptsas_slave_configure(struct scsi_device *sdev) return mptscsih_slave_configure(sdev); } -/* - * This is pretty ugly. We will be able to seriously clean it up - * once the DV code in mptscsih goes away and we can properly - * implement ->target_alloc. - */ +static int +mptsas_target_alloc(struct scsi_target *starget) +{ + struct Scsi_Host *host = dev_to_shost(&starget->dev); + MPT_SCSI_HOST *hd = (MPT_SCSI_HOST *)host->hostdata; + VirtTarget *vtarget; + u32 target_id; + u32 channel; + struct sas_rphy *rphy; + struct mptsas_portinfo *p; + int i; + + vtarget = kzalloc(sizeof(VirtTarget), GFP_KERNEL); + if (!vtarget) + return -ENOMEM; + + vtarget->starget = starget; + vtarget->ioc_id = hd->ioc->id; + vtarget->tflags = MPT_TARGET_FLAGS_Q_YES|MPT_TARGET_FLAGS_VALID_INQUIRY; + + target_id = starget->id; + channel = 0; + + hd->Targets[target_id] = vtarget; + + /* + * RAID volumes placed beyond the last expected port. + */ + if (starget->channel == hd->ioc->num_ports) + goto out; + + rphy = dev_to_rphy(starget->dev.parent); + mutex_lock(&hd->ioc->sas_topology_mutex); + list_for_each_entry(p, &hd->ioc->sas_topology, list) { + for (i = 0; i < p->num_phys; i++) { + if (p->phy_info[i].attached.sas_address != + rphy->identify.sas_address) + continue; + target_id = p->phy_info[i].attached.id; + channel = p->phy_info[i].attached.channel; + mptsas_set_starget(&p->phy_info[i], starget); + + /* + * Exposing hidden raid components + */ + if (mptscsih_is_phys_disk(hd->ioc, target_id)) { + target_id = mptscsih_raid_id_to_num(hd, + target_id); + vtarget->tflags |= + MPT_TARGET_FLAGS_RAID_COMPONENT; + } + mutex_unlock(&hd->ioc->sas_topology_mutex); + goto out; + } + } + mutex_unlock(&hd->ioc->sas_topology_mutex); + + kfree(vtarget); + return -ENXIO; + + out: + vtarget->target_id = target_id; + vtarget->bus_id = channel; + starget->hostdata = vtarget; + return 0; +} + +static void +mptsas_target_destroy(struct scsi_target *starget) +{ + struct Scsi_Host *host = dev_to_shost(&starget->dev); + MPT_SCSI_HOST *hd = (MPT_SCSI_HOST *)host->hostdata; + struct sas_rphy *rphy; + struct mptsas_portinfo *p; + int i; + + if (!starget->hostdata) + return; + + if (starget->channel == hd->ioc->num_ports) + goto out; + + rphy = dev_to_rphy(starget->dev.parent); + list_for_each_entry(p, &hd->ioc->sas_topology, list) { + for (i = 0; i < p->num_phys; i++) { + if (p->phy_info[i].attached.sas_address != + rphy->identify.sas_address) + continue; + mptsas_set_starget(&p->phy_info[i], NULL); + goto out; + } + } + + out: + kfree(starget->hostdata); + starget->hostdata = NULL; +} + + static int mptsas_slave_alloc(struct scsi_device *sdev) { @@ -412,61 +770,41 @@ mptsas_slave_alloc(struct scsi_device *sdev) MPT_SCSI_HOST *hd = (MPT_SCSI_HOST *)host->hostdata; struct sas_rphy *rphy; struct mptsas_portinfo *p; - VirtTarget *vtarget; VirtDevice *vdev; struct scsi_target *starget; - u32 target_id; - int i; + int i; vdev = kzalloc(sizeof(VirtDevice), GFP_KERNEL); if (!vdev) { - printk(MYIOC_s_ERR_FMT "slave_alloc kmalloc(%zd) FAILED!\n", + printk(MYIOC_s_ERR_FMT "slave_alloc kzalloc(%zd) FAILED!\n", hd->ioc->name, sizeof(VirtDevice)); return -ENOMEM; } - sdev->hostdata = vdev; starget = scsi_target(sdev); - vtarget = starget->hostdata; - vtarget->ioc_id = hd->ioc->id; - vdev->vtarget = vtarget; - if (vtarget->num_luns == 0) { - vtarget->tflags = MPT_TARGET_FLAGS_Q_YES|MPT_TARGET_FLAGS_VALID_INQUIRY; - hd->Targets[sdev->id] = vtarget; - } + vdev->vtarget = starget->hostdata; /* - RAID volumes placed beyond the last expected port. - */ - if (sdev->channel == hd->ioc->num_ports) { - target_id = sdev->id; - vtarget->bus_id = 0; - vdev->lun = 0; + * RAID volumes placed beyond the last expected port. + */ + if (sdev->channel == hd->ioc->num_ports) goto out; - } rphy = dev_to_rphy(sdev->sdev_target->dev.parent); mutex_lock(&hd->ioc->sas_topology_mutex); list_for_each_entry(p, &hd->ioc->sas_topology, list) { for (i = 0; i < p->num_phys; i++) { - if (p->phy_info[i].attached.sas_address == - rphy->identify.sas_address) { - target_id = p->phy_info[i].attached.id; - vtarget->bus_id = p->phy_info[i].attached.channel; - vdev->lun = sdev->lun; - p->phy_info[i].starget = sdev->sdev_target; - /* - * Exposing hidden disk (RAID) - */ - if (mptscsih_is_phys_disk(hd->ioc, target_id)) { - target_id = mptscsih_raid_id_to_num(hd, - target_id); - vdev->vtarget->tflags |= - MPT_TARGET_FLAGS_RAID_COMPONENT; - sdev->no_uld_attach = 1; - } - mutex_unlock(&hd->ioc->sas_topology_mutex); - goto out; - } + if (p->phy_info[i].attached.sas_address != + rphy->identify.sas_address) + continue; + vdev->lun = sdev->lun; + /* + * Exposing hidden raid components + */ + if (mptscsih_is_phys_disk(hd->ioc, + p->phy_info[i].attached.id)) + sdev->no_uld_attach = 1; + mutex_unlock(&hd->ioc->sas_topology_mutex); + goto out; } } mutex_unlock(&hd->ioc->sas_topology_mutex); @@ -475,57 +813,39 @@ mptsas_slave_alloc(struct scsi_device *sdev) return -ENXIO; out: - vtarget->target_id = target_id; - vtarget->num_luns++; + vdev->vtarget->num_luns++; + sdev->hostdata = vdev; return 0; } -static void -mptsas_slave_destroy(struct scsi_device *sdev) +static int +mptsas_qcmd(struct scsi_cmnd *SCpnt, void (*done)(struct scsi_cmnd *)) { - struct Scsi_Host *host = sdev->host; - MPT_SCSI_HOST *hd = (MPT_SCSI_HOST *)host->hostdata; - VirtDevice *vdev; + VirtDevice *vdev = SCpnt->device->hostdata; - /* - * Issue target reset to flush firmware outstanding commands. - */ - vdev = sdev->hostdata; - if (vdev->configured_lun){ - if (mptscsih_TMHandler(hd, - MPI_SCSITASKMGMT_TASKTYPE_TARGET_RESET, - vdev->vtarget->bus_id, - vdev->vtarget->target_id, - 0, 0, 5 /* 5 second timeout */) - < 0){ - - /* The TM request failed! - * Fatal error case. - */ - printk(MYIOC_s_WARN_FMT - "Error processing TaskMgmt id=%d TARGET_RESET\n", - hd->ioc->name, - vdev->vtarget->target_id); - - hd->tmPending = 0; - hd->tmState = TM_STATE_NONE; - } +// scsi_print_command(SCpnt); + if (vdev->vtarget->deleted) { + SCpnt->result = DID_NO_CONNECT << 16; + done(SCpnt); + return 0; } - mptscsih_slave_destroy(sdev); + + return mptscsih_qcmd(SCpnt,done); } + static struct scsi_host_template mptsas_driver_template = { .module = THIS_MODULE, .proc_name = "mptsas", .proc_info = mptscsih_proc_info, .name = "MPT SPI Host", .info = mptscsih_info, - .queuecommand = mptscsih_qcmd, - .target_alloc = mptscsih_target_alloc, + .queuecommand = mptsas_qcmd, + .target_alloc = mptsas_target_alloc, .slave_alloc = mptsas_slave_alloc, .slave_configure = mptsas_slave_configure, - .target_destroy = mptscsih_target_destroy, - .slave_destroy = mptsas_slave_destroy, + .target_destroy = mptsas_target_destroy, + .slave_destroy = mptscsih_slave_destroy, .change_queue_depth = mptscsih_change_queue_depth, .eh_abort_handler = mptscsih_abort, .eh_device_reset_handler = mptscsih_dev_reset, @@ -795,7 +1115,7 @@ mptsas_sas_io_unit_pg0(MPT_ADAPTER *ioc, struct mptsas_portinfo *port_info) port_info->num_phys = buffer->NumPhys; port_info->phy_info = kcalloc(port_info->num_phys, - sizeof(struct mptsas_phyinfo),GFP_KERNEL); + sizeof(*port_info->phy_info),GFP_KERNEL); if (!port_info->phy_info) { error = -ENOMEM; goto out_free_consistent; @@ -811,6 +1131,7 @@ mptsas_sas_io_unit_pg0(MPT_ADAPTER *ioc, struct mptsas_portinfo *port_info) buffer->PhyData[i].Port; port_info->phy_info[i].negotiated_link_rate = buffer->PhyData[i].NegotiatedLinkRate; + port_info->phy_info[i].portinfo = port_info; } out_free_consistent: @@ -968,7 +1289,7 @@ mptsas_sas_expander_pg0(MPT_ADAPTER *ioc, struct mptsas_portinfo *port_info, CONFIGPARMS cfg; SasExpanderPage0_t *buffer; dma_addr_t dma_handle; - int error; + int i, error; hdr.PageVersion = MPI_SASEXPANDER0_PAGEVERSION; hdr.ExtPageLength = 0; @@ -1013,12 +1334,15 @@ mptsas_sas_expander_pg0(MPT_ADAPTER *ioc, struct mptsas_portinfo *port_info, port_info->num_phys = buffer->NumPhys; port_info->handle = le16_to_cpu(buffer->DevHandle); port_info->phy_info = kcalloc(port_info->num_phys, - sizeof(struct mptsas_phyinfo),GFP_KERNEL); + sizeof(*port_info->phy_info),GFP_KERNEL); if (!port_info->phy_info) { error = -ENOMEM; goto out_free_consistent; } + for (i = 0; i < port_info->num_phys; i++) + port_info->phy_info[i].portinfo = port_info; + out_free_consistent: pci_free_consistent(ioc->pcidev, hdr.ExtPageLength * 4, buffer, dma_handle); @@ -1161,19 +1485,23 @@ static int mptsas_probe_one_phy(struct device *dev, { MPT_ADAPTER *ioc; struct sas_phy *phy; - int error; + struct sas_port *port; + int error = 0; - if (!dev) - return -ENODEV; + if (!dev) { + error = -ENODEV; + goto out; + } if (!phy_info->phy) { phy = sas_phy_alloc(dev, index); - if (!phy) - return -ENOMEM; + if (!phy) { + error = -ENOMEM; + goto out; + } } else phy = phy_info->phy; - phy->port_identifier = phy_info->port_id; mptsas_parse_device_info(&phy->identify, &phy_info->identify); /* @@ -1265,19 +1593,52 @@ static int mptsas_probe_one_phy(struct device *dev, error = sas_phy_add(phy); if (error) { sas_phy_free(phy); - return error; + goto out; } phy_info->phy = phy; } - if ((phy_info->attached.handle) && - (!phy_info->rphy)) { + if (!phy_info->attached.handle || + !phy_info->port_details) + goto out; + + port = mptsas_get_port(phy_info); + ioc = phy_to_ioc(phy_info->phy); + + if (phy_info->sas_port_add_phy) { + + if (!port) { + port = sas_port_alloc(dev, + phy_info->port_details->port_id); + dsaswideprintk((KERN_DEBUG + "sas_port_alloc: port=%p dev=%p port_id=%d\n", + port, dev, phy_info->port_details->port_id)); + if (!port) { + error = -ENOMEM; + goto out; + } + error = sas_port_add(port); + if (error) { + dfailprintk((MYIOC_s_ERR_FMT + "%s: exit at line=%d\n", ioc->name, + __FUNCTION__, __LINE__)); + goto out; + } + mptsas_set_port(phy_info, port); + } + dsaswideprintk((KERN_DEBUG "sas_port_add_phy: phy_id=%d\n", + phy_info->phy_id)); + sas_port_add_phy(port, phy_info->phy); + phy_info->sas_port_add_phy = 0; + } + + if (!mptsas_get_rphy(phy_info) && port && !port->rphy) { struct sas_rphy *rphy; + struct device *parent; struct sas_identify identify; - ioc = phy_to_ioc(phy_info->phy); - + parent = dev->parent->parent; /* * Let the hotplug_work thread handle processing * the adding/removing of devices that occur @@ -1285,36 +1646,63 @@ static int mptsas_probe_one_phy(struct device *dev, */ if (ioc->sas_discovery_runtime && mptsas_is_end_device(&phy_info->attached)) - return 0; + goto out; mptsas_parse_device_info(&identify, &phy_info->attached); + if (scsi_is_host_device(parent)) { + struct mptsas_portinfo *port_info; + int i; + + mutex_lock(&ioc->sas_topology_mutex); + port_info = mptsas_find_portinfo_by_handle(ioc, + ioc->handle); + mutex_unlock(&ioc->sas_topology_mutex); + + for (i = 0; i < port_info->num_phys; i++) + if (port_info->phy_info[i].identify.sas_address == + identify.sas_address) + goto out; + + } else if (scsi_is_sas_rphy(parent)) { + struct sas_rphy *parent_rphy = dev_to_rphy(parent); + if (identify.sas_address == + parent_rphy->identify.sas_address) + goto out; + } + switch (identify.device_type) { case SAS_END_DEVICE: - rphy = sas_end_device_alloc(phy); + rphy = sas_end_device_alloc(port); break; case SAS_EDGE_EXPANDER_DEVICE: case SAS_FANOUT_EXPANDER_DEVICE: - rphy = sas_expander_alloc(phy, identify.device_type); + rphy = sas_expander_alloc(port, identify.device_type); break; default: rphy = NULL; break; } - if (!rphy) - return 0; /* non-fatal: an rphy can be added later */ + if (!rphy) { + dfailprintk((MYIOC_s_ERR_FMT + "%s: exit at line=%d\n", ioc->name, + __FUNCTION__, __LINE__)); + goto out; + } rphy->identify = identify; - error = sas_rphy_add(rphy); if (error) { + dfailprintk((MYIOC_s_ERR_FMT + "%s: exit at line=%d\n", ioc->name, + __FUNCTION__, __LINE__)); sas_rphy_free(rphy); - return error; + goto out; } - - phy_info->rphy = rphy; + mptsas_set_rphy(phy_info, rphy); } - return 0; + out: + return error; } static int @@ -1333,6 +1721,7 @@ mptsas_probe_hba_phys(MPT_ADAPTER *ioc) goto out_free_port_info; mutex_lock(&ioc->sas_topology_mutex); + ioc->handle = hba->handle; port_info = mptsas_find_portinfo_by_handle(ioc, hba->handle); if (!port_info) { port_info = hba; @@ -1342,8 +1731,7 @@ mptsas_probe_hba_phys(MPT_ADAPTER *ioc) for (i = 0; i < hba->num_phys; i++) port_info->phy_info[i].negotiated_link_rate = hba->phy_info[i].negotiated_link_rate; - if (hba->phy_info) - kfree(hba->phy_info); + kfree(hba->phy_info); kfree(hba); hba = NULL; } @@ -1362,18 +1750,19 @@ mptsas_probe_hba_phys(MPT_ADAPTER *ioc) port_info->phy_info[i].phy_id; handle = port_info->phy_info[i].identify.handle; - if (port_info->phy_info[i].attached.handle) { + if (port_info->phy_info[i].attached.handle) mptsas_sas_device_pg0(ioc, &port_info->phy_info[i].attached, (MPI_SAS_DEVICE_PGAD_FORM_HANDLE << MPI_SAS_DEVICE_PGAD_FORM_SHIFT), port_info->phy_info[i].attached.handle); - } + } + + mptsas_setup_wide_ports(ioc, port_info); + for (i = 0; i < port_info->num_phys; i++, ioc->sas_index++) mptsas_probe_one_phy(&ioc->sh->shost_gendev, &port_info->phy_info[i], ioc->sas_index, 1); - ioc->sas_index++; - } return 0; @@ -1387,6 +1776,8 @@ static int mptsas_probe_expander_phys(MPT_ADAPTER *ioc, u32 *handle) { struct mptsas_portinfo *port_info, *p, *ex; + struct device *parent; + struct sas_rphy *rphy; int error = -ENOMEM, i, j; ex = kzalloc(sizeof(*port_info), GFP_KERNEL); @@ -1408,16 +1799,13 @@ mptsas_probe_expander_phys(MPT_ADAPTER *ioc, u32 *handle) list_add_tail(&port_info->list, &ioc->sas_topology); } else { port_info->handle = ex->handle; - if (ex->phy_info) - kfree(ex->phy_info); + kfree(ex->phy_info); kfree(ex); ex = NULL; } mutex_unlock(&ioc->sas_topology_mutex); for (i = 0; i < port_info->num_phys; i++) { - struct device *parent; - mptsas_sas_expander_pg1(ioc, &port_info->phy_info[i], (MPI_SAS_EXPAND_PGAD_FORM_HANDLE_PHY_NUM << MPI_SAS_EXPAND_PGAD_FORM_SHIFT), (i << 16) + *handle); @@ -1441,34 +1829,34 @@ mptsas_probe_expander_phys(MPT_ADAPTER *ioc, u32 *handle) port_info->phy_info[i].attached.phy_id = port_info->phy_info[i].phy_id; } + } - /* - * If we find a parent port handle this expander is - * attached to another expander, else it hangs of the - * HBA phys. - */ - parent = &ioc->sh->shost_gendev; + parent = &ioc->sh->shost_gendev; + for (i = 0; i < port_info->num_phys; i++) { mutex_lock(&ioc->sas_topology_mutex); list_for_each_entry(p, &ioc->sas_topology, list) { for (j = 0; j < p->num_phys; j++) { - if (port_info->phy_info[i].identify.handle == + if (port_info->phy_info[i].identify.handle != p->phy_info[j].attached.handle) - parent = &p->phy_info[j].rphy->dev; + continue; + rphy = mptsas_get_rphy(&p->phy_info[j]); + parent = &rphy->dev; } } mutex_unlock(&ioc->sas_topology_mutex); + } + + mptsas_setup_wide_ports(ioc, port_info); + for (i = 0; i < port_info->num_phys; i++, ioc->sas_index++) mptsas_probe_one_phy(parent, &port_info->phy_info[i], ioc->sas_index, 0); - ioc->sas_index++; - } return 0; out_free_port_info: if (ex) { - if (ex->phy_info) - kfree(ex->phy_info); + kfree(ex->phy_info); kfree(ex); } out: @@ -1487,7 +1875,12 @@ mptsas_delete_expander_phys(MPT_ADAPTER *ioc) { struct mptsas_portinfo buffer; struct mptsas_portinfo *port_info, *n, *parent; + struct mptsas_phyinfo *phy_info; + struct scsi_target * starget; + VirtTarget * vtarget; + struct sas_port * port; int i; + u64 expander_sas_address; mutex_lock(&ioc->sas_topology_mutex); list_for_each_entry_safe(port_info, n, &ioc->sas_topology, list) { @@ -1502,6 +1895,25 @@ mptsas_delete_expander_phys(MPT_ADAPTER *ioc) MPI_SAS_EXPAND_PGAD_FORM_SHIFT), port_info->handle)) { /* + * Issue target reset to all child end devices + * then mark them deleted to prevent further + * IO going to them. + */ + phy_info = port_info->phy_info; + for (i = 0; i < port_info->num_phys; i++, phy_info++) { + starget = mptsas_get_starget(phy_info); + if (!starget) + continue; + vtarget = starget->hostdata; + if(vtarget->deleted) + continue; + vtarget->deleted = 1; + mptsas_target_reset(ioc, vtarget); + sas_port_delete(mptsas_get_port(phy_info)); + mptsas_port_delete(phy_info->port_details); + } + + /* * Obtain the port_info instance to the parent port */ parent = mptsas_find_portinfo_by_handle(ioc, @@ -1510,34 +1922,43 @@ mptsas_delete_expander_phys(MPT_ADAPTER *ioc) if (!parent) goto next_port; + expander_sas_address = + port_info->phy_info[0].identify.sas_address; + /* * Delete rphys in the parent that point * to this expander. The transport layer will * cleanup all the children. */ - for (i = 0; i < parent->num_phys; i++) { - if ((!parent->phy_info[i].rphy) || - (parent->phy_info[i].attached.sas_address != - port_info->phy_info[i].identify.sas_address)) + phy_info = parent->phy_info; + for (i = 0; i < parent->num_phys; i++, phy_info++) { + port = mptsas_get_port(phy_info); + if (!port) + continue; + if (phy_info->attached.sas_address != + expander_sas_address) continue; - sas_rphy_delete(parent->phy_info[i].rphy); - memset(&parent->phy_info[i].attached, 0, - sizeof(struct mptsas_devinfo)); - parent->phy_info[i].rphy = NULL; - parent->phy_info[i].starget = NULL; +#ifdef MPT_DEBUG_SAS_WIDE + dev_printk(KERN_DEBUG, &port->dev, "delete\n"); +#endif + sas_port_delete(port); + mptsas_port_delete(phy_info->port_details); } next_port: + + phy_info = port_info->phy_info; + for (i = 0; i < port_info->num_phys; i++, phy_info++) + mptsas_port_delete(phy_info->port_details); + list_del(&port_info->list); - if (port_info->phy_info) - kfree(port_info->phy_info); + kfree(port_info->phy_info); kfree(port_info); } /* * Free this memory allocated from inside * mptsas_sas_expander_pg0 */ - if (buffer.phy_info) - kfree(buffer.phy_info); + kfree(buffer.phy_info); } mutex_unlock(&ioc->sas_topology_mutex); } @@ -1573,60 +1994,59 @@ mptsas_scan_sas_topology(MPT_ADAPTER *ioc) /* * Work queue thread to handle Runtime discovery * Mere purpose is the hot add/delete of expanders + *(Mutex UNLOCKED) */ static void -mptscsih_discovery_work(void * arg) +__mptsas_discovery_work(MPT_ADAPTER *ioc) { - struct mptsas_discovery_event *ev = arg; - MPT_ADAPTER *ioc = ev->ioc; u32 handle = 0xFFFF; - mutex_lock(&ioc->sas_discovery_mutex); ioc->sas_discovery_runtime=1; mptsas_delete_expander_phys(ioc); mptsas_probe_hba_phys(ioc); while (!mptsas_probe_expander_phys(ioc, &handle)) ; - kfree(ev); ioc->sas_discovery_runtime=0; +} + +/* + * Work queue thread to handle Runtime discovery + * Mere purpose is the hot add/delete of expanders + *(Mutex LOCKED) + */ +static void +mptsas_discovery_work(void * arg) +{ + struct mptsas_discovery_event *ev = arg; + MPT_ADAPTER *ioc = ev->ioc; + + mutex_lock(&ioc->sas_discovery_mutex); + __mptsas_discovery_work(ioc); mutex_unlock(&ioc->sas_discovery_mutex); + kfree(ev); } static struct mptsas_phyinfo * -mptsas_find_phyinfo_by_parent(MPT_ADAPTER *ioc, u16 parent_handle, u8 phy_id) +mptsas_find_phyinfo_by_sas_address(MPT_ADAPTER *ioc, u64 sas_address) { struct mptsas_portinfo *port_info; - struct mptsas_devinfo device_info; struct mptsas_phyinfo *phy_info = NULL; - int i, error; - - /* - * Retrieve the parent sas_address - */ - error = mptsas_sas_device_pg0(ioc, &device_info, - (MPI_SAS_DEVICE_PGAD_FORM_HANDLE << - MPI_SAS_DEVICE_PGAD_FORM_SHIFT), - parent_handle); - if (error) - return NULL; + int i; - /* - * The phy_info structures are never deallocated during lifetime of - * a host, so the code below is safe without additional refcounting. - */ mutex_lock(&ioc->sas_topology_mutex); list_for_each_entry(port_info, &ioc->sas_topology, list) { for (i = 0; i < port_info->num_phys; i++) { - if (port_info->phy_info[i].identify.sas_address == - device_info.sas_address && - port_info->phy_info[i].phy_id == phy_id) { - phy_info = &port_info->phy_info[i]; - break; - } + if (port_info->phy_info[i].attached.sas_address + != sas_address) + continue; + if (!mptsas_is_end_device( + &port_info->phy_info[i].attached)) + continue; + phy_info = &port_info->phy_info[i]; + break; } } mutex_unlock(&ioc->sas_topology_mutex); - return phy_info; } @@ -1637,21 +2057,19 @@ mptsas_find_phyinfo_by_target(MPT_ADAPTER *ioc, u32 id) struct mptsas_phyinfo *phy_info = NULL; int i; - /* - * The phy_info structures are never deallocated during lifetime of - * a host, so the code below is safe without additional refcounting. - */ mutex_lock(&ioc->sas_topology_mutex); list_for_each_entry(port_info, &ioc->sas_topology, list) { - for (i = 0; i < port_info->num_phys; i++) - if (mptsas_is_end_device(&port_info->phy_info[i].attached)) - if (port_info->phy_info[i].attached.id == id) { - phy_info = &port_info->phy_info[i]; - break; - } + for (i = 0; i < port_info->num_phys; i++) { + if (port_info->phy_info[i].attached.id != id) + continue; + if (!mptsas_is_end_device( + &port_info->phy_info[i].attached)) + continue; + phy_info = &port_info->phy_info[i]; + break; + } } mutex_unlock(&ioc->sas_topology_mutex); - return phy_info; } @@ -1659,7 +2077,7 @@ mptsas_find_phyinfo_by_target(MPT_ADAPTER *ioc, u32 id) * Work queue thread to clear the persitency table */ static void -mptscsih_sas_persist_clear_table(void * arg) +mptsas_persist_clear_table(void * arg) { MPT_ADAPTER *ioc = (MPT_ADAPTER *)arg; @@ -1680,7 +2098,6 @@ mptsas_reprobe_target(struct scsi_target *starget, int uld_attach) mptsas_reprobe_lun); } - /* * Work queue thread to handle SAS hotplug events */ @@ -1691,14 +2108,17 @@ mptsas_hotplug_work(void *arg) MPT_ADAPTER *ioc = ev->ioc; struct mptsas_phyinfo *phy_info; struct sas_rphy *rphy; + struct sas_port *port; struct scsi_device *sdev; + struct scsi_target * starget; struct sas_identify identify; char *ds = NULL; struct mptsas_devinfo sas_device; VirtTarget *vtarget; + VirtDevice *vdevice; - mutex_lock(&ioc->sas_discovery_mutex); + mutex_lock(&ioc->sas_discovery_mutex); switch (ev->event_type) { case MPTSAS_DEL_DEVICE: @@ -1707,24 +2127,50 @@ mptsas_hotplug_work(void *arg) /* * Sanity checks, for non-existing phys and remote rphys. */ - if (!phy_info) + if (!phy_info || !phy_info->port_details) { + dfailprintk((MYIOC_s_ERR_FMT + "%s: exit at line=%d\n", ioc->name, + __FUNCTION__, __LINE__)); break; - if (!phy_info->rphy) + } + rphy = mptsas_get_rphy(phy_info); + if (!rphy) { + dfailprintk((MYIOC_s_ERR_FMT + "%s: exit at line=%d\n", ioc->name, + __FUNCTION__, __LINE__)); break; - if (phy_info->starget) { - vtarget = phy_info->starget->hostdata; + } + port = mptsas_get_port(phy_info); + if (!port) { + dfailprintk((MYIOC_s_ERR_FMT + "%s: exit at line=%d\n", ioc->name, + __FUNCTION__, __LINE__)); + break; + } - if (!vtarget) + starget = mptsas_get_starget(phy_info); + if (starget) { + vtarget = starget->hostdata; + + if (!vtarget) { + dfailprintk((MYIOC_s_ERR_FMT + "%s: exit at line=%d\n", ioc->name, + __FUNCTION__, __LINE__)); break; + } + /* * Handling RAID components */ if (ev->phys_disk_num_valid) { vtarget->target_id = ev->phys_disk_num; vtarget->tflags |= MPT_TARGET_FLAGS_RAID_COMPONENT; - mptsas_reprobe_target(vtarget->starget, 1); + mptsas_reprobe_target(starget, 1); break; } + + vtarget->deleted = 1; + mptsas_target_reset(ioc, vtarget); } if (phy_info->attached.device_info & MPI_SAS_DEVICE_INFO_SSP_TARGET) @@ -1738,10 +2184,11 @@ mptsas_hotplug_work(void *arg) "removing %s device, channel %d, id %d, phy %d\n", ioc->name, ds, ev->channel, ev->id, phy_info->phy_id); - sas_rphy_delete(phy_info->rphy); - memset(&phy_info->attached, 0, sizeof(struct mptsas_devinfo)); - phy_info->rphy = NULL; - phy_info->starget = NULL; +#ifdef MPT_DEBUG_SAS_WIDE + dev_printk(KERN_DEBUG, &port->dev, "delete\n"); +#endif + sas_port_delete(port); + mptsas_port_delete(phy_info->port_details); break; case MPTSAS_ADD_DEVICE: @@ -1753,59 +2200,60 @@ mptsas_hotplug_work(void *arg) */ if (mptsas_sas_device_pg0(ioc, &sas_device, (MPI_SAS_DEVICE_PGAD_FORM_BUS_TARGET_ID << - MPI_SAS_DEVICE_PGAD_FORM_SHIFT), ev->id)) + MPI_SAS_DEVICE_PGAD_FORM_SHIFT), ev->id)) { + dfailprintk((MYIOC_s_ERR_FMT + "%s: exit at line=%d\n", ioc->name, + __FUNCTION__, __LINE__)); break; + } - phy_info = mptsas_find_phyinfo_by_parent(ioc, - sas_device.handle_parent, sas_device.phy_id); + ssleep(2); + __mptsas_discovery_work(ioc); - if (!phy_info) { - u32 handle = 0xFFFF; + phy_info = mptsas_find_phyinfo_by_sas_address(ioc, + sas_device.sas_address); - /* - * Its possible when an expander has been hot added - * containing attached devices, the sas firmware - * may send a RC_ADDED event prior to the - * DISCOVERY STOP event. If that occurs, our - * view of the topology in the driver in respect to this - * expander might of not been setup, and we hit this - * condition. - * Therefore, this code kicks off discovery to - * refresh the data. - * Then again, we check whether the parent phy has - * been created. - */ - ioc->sas_discovery_runtime=1; - mptsas_delete_expander_phys(ioc); - mptsas_probe_hba_phys(ioc); - while (!mptsas_probe_expander_phys(ioc, &handle)) - ; - ioc->sas_discovery_runtime=0; - - phy_info = mptsas_find_phyinfo_by_parent(ioc, - sas_device.handle_parent, sas_device.phy_id); - if (!phy_info) - break; + if (!phy_info || !phy_info->port_details) { + dfailprintk((MYIOC_s_ERR_FMT + "%s: exit at line=%d\n", ioc->name, + __FUNCTION__, __LINE__)); + break; } - if (phy_info->starget) { - vtarget = phy_info->starget->hostdata; + starget = mptsas_get_starget(phy_info); + if (starget) { + vtarget = starget->hostdata; - if (!vtarget) + if (!vtarget) { + dfailprintk((MYIOC_s_ERR_FMT + "%s: exit at line=%d\n", ioc->name, + __FUNCTION__, __LINE__)); break; + } /* * Handling RAID components */ if (vtarget->tflags & MPT_TARGET_FLAGS_RAID_COMPONENT) { vtarget->tflags &= ~MPT_TARGET_FLAGS_RAID_COMPONENT; vtarget->target_id = ev->id; - mptsas_reprobe_target(phy_info->starget, 0); + mptsas_reprobe_target(starget, 0); } break; } - if (phy_info->rphy) + if (mptsas_get_rphy(phy_info)) { + dfailprintk((MYIOC_s_ERR_FMT + "%s: exit at line=%d\n", ioc->name, + __FUNCTION__, __LINE__)); break; + } + port = mptsas_get_port(phy_info); + if (!port) { + dfailprintk((MYIOC_s_ERR_FMT + "%s: exit at line=%d\n", ioc->name, + __FUNCTION__, __LINE__)); + break; + } memcpy(&phy_info->attached, &sas_device, sizeof(struct mptsas_devinfo)); @@ -1822,28 +2270,23 @@ mptsas_hotplug_work(void *arg) ioc->name, ds, ev->channel, ev->id, ev->phy_id); mptsas_parse_device_info(&identify, &phy_info->attached); - switch (identify.device_type) { - case SAS_END_DEVICE: - rphy = sas_end_device_alloc(phy_info->phy); - break; - case SAS_EDGE_EXPANDER_DEVICE: - case SAS_FANOUT_EXPANDER_DEVICE: - rphy = sas_expander_alloc(phy_info->phy, identify.device_type); - break; - default: - rphy = NULL; - break; - } - if (!rphy) + rphy = sas_end_device_alloc(port); + if (!rphy) { + dfailprintk((MYIOC_s_ERR_FMT + "%s: exit at line=%d\n", ioc->name, + __FUNCTION__, __LINE__)); break; /* non-fatal: an rphy can be added later */ + } rphy->identify = identify; if (sas_rphy_add(rphy)) { + dfailprintk((MYIOC_s_ERR_FMT + "%s: exit at line=%d\n", ioc->name, + __FUNCTION__, __LINE__)); sas_rphy_free(rphy); break; } - - phy_info->rphy = rphy; + mptsas_set_rphy(phy_info, rphy); break; case MPTSAS_ADD_RAID: sdev = scsi_device_lookup( @@ -1875,6 +2318,9 @@ mptsas_hotplug_work(void *arg) printk(MYIOC_s_INFO_FMT "removing raid volume, channel %d, id %d\n", ioc->name, ioc->num_ports, ev->id); + vdevice = sdev->hostdata; + vdevice->vtarget->deleted = 1; + mptsas_target_reset(ioc, vdevice->vtarget); scsi_remove_device(sdev); scsi_device_put(sdev); mpt_findImVolumes(ioc); @@ -1884,12 +2330,13 @@ mptsas_hotplug_work(void *arg) break; } - kfree(ev); mutex_unlock(&ioc->sas_discovery_mutex); + kfree(ev); + } static void -mptscsih_send_sas_event(MPT_ADAPTER *ioc, +mptsas_send_sas_event(MPT_ADAPTER *ioc, EVENT_DATA_SAS_DEVICE_STATUS_CHANGE *sas_event_data) { struct mptsas_hotplug_event *ev; @@ -1905,7 +2352,7 @@ mptscsih_send_sas_event(MPT_ADAPTER *ioc, switch (sas_event_data->ReasonCode) { case MPI_EVENT_SAS_DEV_STAT_RC_ADDED: case MPI_EVENT_SAS_DEV_STAT_RC_NOT_RESPONDING: - ev = kmalloc(sizeof(*ev), GFP_ATOMIC); + ev = kzalloc(sizeof(*ev), GFP_ATOMIC); if (!ev) { printk(KERN_WARNING "mptsas: lost hotplug event\n"); break; @@ -1935,10 +2382,9 @@ mptscsih_send_sas_event(MPT_ADAPTER *ioc, /* * Persistent table is full. */ - INIT_WORK(&ioc->mptscsih_persistTask, - mptscsih_sas_persist_clear_table, - (void *)ioc); - schedule_work(&ioc->mptscsih_persistTask); + INIT_WORK(&ioc->sas_persist_task, + mptsas_persist_clear_table, (void *)ioc); + schedule_work(&ioc->sas_persist_task); break; case MPI_EVENT_SAS_DEV_STAT_RC_SMART_DATA: /* TODO */ @@ -1950,7 +2396,7 @@ mptscsih_send_sas_event(MPT_ADAPTER *ioc, } static void -mptscsih_send_raid_event(MPT_ADAPTER *ioc, +mptsas_send_raid_event(MPT_ADAPTER *ioc, EVENT_DATA_RAID *raid_event_data) { struct mptsas_hotplug_event *ev; @@ -1960,13 +2406,12 @@ mptscsih_send_raid_event(MPT_ADAPTER *ioc, if (ioc->bus_type != SAS) return; - ev = kmalloc(sizeof(*ev), GFP_ATOMIC); + ev = kzalloc(sizeof(*ev), GFP_ATOMIC); if (!ev) { printk(KERN_WARNING "mptsas: lost hotplug event\n"); return; } - memset(ev,0,sizeof(struct mptsas_hotplug_event)); INIT_WORK(&ev->work, mptsas_hotplug_work, ev); ev->ioc = ioc; ev->id = raid_event_data->VolumeID; @@ -2028,7 +2473,7 @@ mptscsih_send_raid_event(MPT_ADAPTER *ioc, } static void -mptscsih_send_discovery(MPT_ADAPTER *ioc, +mptsas_send_discovery_event(MPT_ADAPTER *ioc, EVENT_DATA_SAS_DISCOVERY *discovery_data) { struct mptsas_discovery_event *ev; @@ -2043,11 +2488,10 @@ mptscsih_send_discovery(MPT_ADAPTER *ioc, if (discovery_data->DiscoveryStatus) return; - ev = kmalloc(sizeof(*ev), GFP_ATOMIC); + ev = kzalloc(sizeof(*ev), GFP_ATOMIC); if (!ev) return; - memset(ev,0,sizeof(struct mptsas_discovery_event)); - INIT_WORK(&ev->work, mptscsih_discovery_work, ev); + INIT_WORK(&ev->work, mptsas_discovery_work, ev); ev->ioc = ioc; schedule_work(&ev->work); }; @@ -2075,21 +2519,21 @@ mptsas_event_process(MPT_ADAPTER *ioc, EventNotificationReply_t *reply) switch (event) { case MPI_EVENT_SAS_DEVICE_STATUS_CHANGE: - mptscsih_send_sas_event(ioc, + mptsas_send_sas_event(ioc, (EVENT_DATA_SAS_DEVICE_STATUS_CHANGE *)reply->Data); break; case MPI_EVENT_INTEGRATED_RAID: - mptscsih_send_raid_event(ioc, + mptsas_send_raid_event(ioc, (EVENT_DATA_RAID *)reply->Data); break; case MPI_EVENT_PERSISTENT_TABLE_FULL: - INIT_WORK(&ioc->mptscsih_persistTask, - mptscsih_sas_persist_clear_table, + INIT_WORK(&ioc->sas_persist_task, + mptsas_persist_clear_table, (void *)ioc); - schedule_work(&ioc->mptscsih_persistTask); + schedule_work(&ioc->sas_persist_task); break; case MPI_EVENT_SAS_DISCOVERY: - mptscsih_send_discovery(ioc, + mptsas_send_discovery_event(ioc, (EVENT_DATA_SAS_DISCOVERY *)reply->Data); break; default: @@ -2308,7 +2752,7 @@ mptsas_probe(struct pci_dev *pdev, const struct pci_device_id *id) return 0; -out_mptsas_probe: + out_mptsas_probe: mptscsih_remove(pdev); return error; @@ -2318,6 +2762,7 @@ static void __devexit mptsas_remove(struct pci_dev *pdev) { MPT_ADAPTER *ioc = pci_get_drvdata(pdev); struct mptsas_portinfo *p, *n; + int i; ioc->sas_discovery_ignore_events=1; sas_remove_host(ioc->sh); @@ -2325,8 +2770,9 @@ static void __devexit mptsas_remove(struct pci_dev *pdev) mutex_lock(&ioc->sas_topology_mutex); list_for_each_entry_safe(p, n, &ioc->sas_topology, list) { list_del(&p->list); - if (p->phy_info) - kfree(p->phy_info); + for (i = 0 ; i < p->num_phys ; i++) + mptsas_port_delete(p->phy_info[i].port_details); + kfree(p->phy_info); kfree(p); } mutex_unlock(&ioc->sas_topology_mutex); @@ -2335,17 +2781,15 @@ static void __devexit mptsas_remove(struct pci_dev *pdev) } static struct pci_device_id mptsas_pci_table[] = { - { PCI_VENDOR_ID_LSI_LOGIC, PCI_DEVICE_ID_LSI_SAS1064, - PCI_ANY_ID, PCI_ANY_ID }, - { PCI_VENDOR_ID_LSI_LOGIC, PCI_DEVICE_ID_LSI_SAS1066, + { PCI_VENDOR_ID_LSI_LOGIC, MPI_MANUFACTPAGE_DEVID_SAS1064, PCI_ANY_ID, PCI_ANY_ID }, - { PCI_VENDOR_ID_LSI_LOGIC, PCI_DEVICE_ID_LSI_SAS1068, + { PCI_VENDOR_ID_LSI_LOGIC, MPI_MANUFACTPAGE_DEVID_SAS1068, PCI_ANY_ID, PCI_ANY_ID }, - { PCI_VENDOR_ID_LSI_LOGIC, PCI_DEVICE_ID_LSI_SAS1064E, + { PCI_VENDOR_ID_LSI_LOGIC, MPI_MANUFACTPAGE_DEVID_SAS1064E, PCI_ANY_ID, PCI_ANY_ID }, - { PCI_VENDOR_ID_LSI_LOGIC, PCI_DEVICE_ID_LSI_SAS1066E, + { PCI_VENDOR_ID_LSI_LOGIC, MPI_MANUFACTPAGE_DEVID_SAS1068E, PCI_ANY_ID, PCI_ANY_ID }, - { PCI_VENDOR_ID_LSI_LOGIC, PCI_DEVICE_ID_LSI_SAS1068E, + { PCI_VENDOR_ID_LSI_LOGIC, MPI_MANUFACTPAGE_DEVID_SAS1078, PCI_ANY_ID, PCI_ANY_ID }, {0} /* Terminating entry */ }; diff --git a/drivers/message/fusion/mptspi.c b/drivers/message/fusion/mptspi.c index 3201de05394..0a1ff762205 100644 --- a/drivers/message/fusion/mptspi.c +++ b/drivers/message/fusion/mptspi.c @@ -775,9 +775,9 @@ static struct spi_function_template mptspi_transport_functions = { */ static struct pci_device_id mptspi_pci_table[] = { - { PCI_VENDOR_ID_LSI_LOGIC, PCI_DEVICE_ID_LSI_53C1030, + { PCI_VENDOR_ID_LSI_LOGIC, MPI_MANUFACTPAGE_DEVID_53C1030, PCI_ANY_ID, PCI_ANY_ID }, - { PCI_VENDOR_ID_LSI_LOGIC, PCI_DEVICE_ID_LSI_1030_53C1035, + { PCI_VENDOR_ID_LSI_LOGIC, MPI_MANUFACTPAGE_DEVID_53C1035, PCI_ANY_ID, PCI_ANY_ID }, {0} /* Terminating entry */ }; |