summaryrefslogtreecommitdiffstats
path: root/drivers/message
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/message')
-rw-r--r--drivers/message/fusion/lsi/mpi_log_fc.h4
-rw-r--r--drivers/message/fusion/lsi/mpi_log_sas.h14
-rw-r--r--drivers/message/fusion/mptbase.c6
-rw-r--r--drivers/message/fusion/mptctl.c4
-rw-r--r--drivers/message/fusion/mptsas.c8
-rw-r--r--drivers/message/i2o/README2
-rw-r--r--drivers/message/i2o/device.c8
-rw-r--r--drivers/message/i2o/i2o_block.c4
-rw-r--r--drivers/message/i2o/i2o_block.h2
-rw-r--r--drivers/message/i2o/i2o_scsi.c2
10 files changed, 27 insertions, 27 deletions
diff --git a/drivers/message/fusion/lsi/mpi_log_fc.h b/drivers/message/fusion/lsi/mpi_log_fc.h
index face6e7acc7..03be8b21770 100644
--- a/drivers/message/fusion/lsi/mpi_log_fc.h
+++ b/drivers/message/fusion/lsi/mpi_log_fc.h
@@ -38,8 +38,8 @@ typedef enum _MpiIocLogInfoFc
{
MPI_IOCLOGINFO_FC_INIT_BASE = 0x20000000,
MPI_IOCLOGINFO_FC_INIT_ERROR_OUT_OF_ORDER_FRAME = 0x20000001, /* received an out of order frame - unsupported */
- MPI_IOCLOGINFO_FC_INIT_ERROR_BAD_START_OF_FRAME = 0x20000002, /* Bad Rx Frame, bad start of frame primative */
- MPI_IOCLOGINFO_FC_INIT_ERROR_BAD_END_OF_FRAME = 0x20000003, /* Bad Rx Frame, bad end of frame primative */
+ MPI_IOCLOGINFO_FC_INIT_ERROR_BAD_START_OF_FRAME = 0x20000002, /* Bad Rx Frame, bad start of frame primitive */
+ MPI_IOCLOGINFO_FC_INIT_ERROR_BAD_END_OF_FRAME = 0x20000003, /* Bad Rx Frame, bad end of frame primitive */
MPI_IOCLOGINFO_FC_INIT_ERROR_OVER_RUN = 0x20000004, /* Bad Rx Frame, overrun */
MPI_IOCLOGINFO_FC_INIT_ERROR_RX_OTHER = 0x20000005, /* Other errors caught by IOC which require retries */
MPI_IOCLOGINFO_FC_INIT_ERROR_SUBPROC_DEAD = 0x20000006, /* Main processor could not initialize sub-processor */
diff --git a/drivers/message/fusion/lsi/mpi_log_sas.h b/drivers/message/fusion/lsi/mpi_log_sas.h
index 8b04810df46..f62960b5d52 100644
--- a/drivers/message/fusion/lsi/mpi_log_sas.h
+++ b/drivers/message/fusion/lsi/mpi_log_sas.h
@@ -56,9 +56,9 @@
#define IOP_LOGINFO_CODE_FWUPLOAD_NO_FLASH_AVAILABLE (0x0003E000) /* Tried to upload from flash, but there is none */
#define IOP_LOGINFO_CODE_FWUPLOAD_UNKNOWN_IMAGE_TYPE (0x0003E001) /* ImageType field contents were invalid */
#define IOP_LOGINFO_CODE_FWUPLOAD_WRONG_IMAGE_SIZE (0x0003E002) /* ImageSize field in TCSGE was bad/offset in MfgPg 4 was wrong */
-#define IOP_LOGINFO_CODE_FWUPLOAD_ENTIRE_FLASH_UPLOAD_FAILED (0x0003E003) /* Error occured while attempting to upload the entire flash */
-#define IOP_LOGINFO_CODE_FWUPLOAD_REGION_UPLOAD_FAILED (0x0003E004) /* Error occured while attempting to upload single flash region */
-#define IOP_LOGINFO_CODE_FWUPLOAD_DMA_FAILURE (0x0003E005) /* Problem occured while DMAing FW to host memory */
+#define IOP_LOGINFO_CODE_FWUPLOAD_ENTIRE_FLASH_UPLOAD_FAILED (0x0003E003) /* Error occurred while attempting to upload the entire flash */
+#define IOP_LOGINFO_CODE_FWUPLOAD_REGION_UPLOAD_FAILED (0x0003E004) /* Error occurred while attempting to upload single flash region */
+#define IOP_LOGINFO_CODE_FWUPLOAD_DMA_FAILURE (0x0003E005) /* Problem occurred while DMAing FW to host memory */
#define IOP_LOGINFO_CODE_DIAG_MSG_ERROR (0x00040000) /* Error handling diag msg - or'd with diag status */
@@ -187,8 +187,8 @@
#define PL_LOGINFO_SUB_CODE_BREAK_ON_INCOMPLETE_BREAK_RCVD (0x00005000)
#define PL_LOGINFO_CODE_ENCL_MGMT_SMP_FRAME_FAILURE (0x00200000) /* Can't get SMP Frame */
-#define PL_LOGINFO_CODE_ENCL_MGMT_SMP_READ_ERROR (0x00200010) /* Error occured on SMP Read */
-#define PL_LOGINFO_CODE_ENCL_MGMT_SMP_WRITE_ERROR (0x00200020) /* Error occured on SMP Write */
+#define PL_LOGINFO_CODE_ENCL_MGMT_SMP_READ_ERROR (0x00200010) /* Error occurred on SMP Read */
+#define PL_LOGINFO_CODE_ENCL_MGMT_SMP_WRITE_ERROR (0x00200020) /* Error occurred on SMP Write */
#define PL_LOGINFO_CODE_ENCL_MGMT_NOT_SUPPORTED_ON_ENCL (0x00200040) /* Encl Mgmt services not available for this WWID */
#define PL_LOGINFO_CODE_ENCL_MGMT_ADDR_MODE_NOT_SUPPORTED (0x00200050) /* Address Mode not suppored */
#define PL_LOGINFO_CODE_ENCL_MGMT_BAD_SLOT_NUM (0x00200060) /* Invalid Slot Number in SEP Msg */
@@ -207,8 +207,8 @@
#define PL_LOGINFO_DA_SEP_RECEIVED_NACK_FROM_SLAVE (0x00200103) /* SEP NACK'd, it is busy */
#define PL_LOGINFO_DA_SEP_DID_NOT_RECEIVE_ACK (0x00200104) /* SEP didn't rcv. ACK (Last Rcvd Bit = 1) */
#define PL_LOGINFO_DA_SEP_BAD_STATUS_HDR_CHKSUM (0x00200105) /* SEP stopped or sent bad chksum in Hdr */
-#define PL_LOGINFO_DA_SEP_STOP_ON_DATA (0x00200106) /* SEP stopped while transfering data */
-#define PL_LOGINFO_DA_SEP_STOP_ON_SENSE_DATA (0x00200107) /* SEP stopped while transfering sense data */
+#define PL_LOGINFO_DA_SEP_STOP_ON_DATA (0x00200106) /* SEP stopped while transferring data */
+#define PL_LOGINFO_DA_SEP_STOP_ON_SENSE_DATA (0x00200107) /* SEP stopped while transferring sense data */
#define PL_LOGINFO_DA_SEP_UNSUPPORTED_SCSI_STATUS_1 (0x00200108) /* SEP returned unknown scsi status */
#define PL_LOGINFO_DA_SEP_UNSUPPORTED_SCSI_STATUS_2 (0x00200109) /* SEP returned unknown scsi status */
#define PL_LOGINFO_DA_SEP_CHKSUM_ERROR_AFTER_STOP (0x0020010A) /* SEP returned bad chksum after STOP */
diff --git a/drivers/message/fusion/mptbase.c b/drivers/message/fusion/mptbase.c
index ec8080c9808..fa15e853d4e 100644
--- a/drivers/message/fusion/mptbase.c
+++ b/drivers/message/fusion/mptbase.c
@@ -3435,7 +3435,7 @@ SendPortEnable(MPT_ADAPTER *ioc, int portnum, int sleepFlag)
* If memory has already been allocated, the same (cached) value
* is returned.
*
- * Return 0 if successfull, or non-zero for failure
+ * Return 0 if successful, or non-zero for failure
**/
int
mpt_alloc_fw_memory(MPT_ADAPTER *ioc, int size)
@@ -6932,7 +6932,7 @@ EXPORT_SYMBOL(mpt_halt_firmware);
* Message Unit Reset - instructs the IOC to reset the Reply Post and
* Free FIFO's. All the Message Frames on Reply Free FIFO are discarded.
* All posted buffers are freed, and event notification is turned off.
- * IOC doesnt reply to any outstanding request. This will transfer IOC
+ * IOC doesn't reply to any outstanding request. This will transfer IOC
* to READY state.
**/
int
@@ -7905,7 +7905,7 @@ mpt_spi_log_info(MPT_ADAPTER *ioc, u32 log_info)
"Owner", /* 15h */
"Open Transmit DMA Abort", /* 16h */
"IO Device Missing Delay Retry", /* 17h */
- "IO Cancelled Due to Recieve Error", /* 18h */
+ "IO Cancelled Due to Receive Error", /* 18h */
NULL, /* 19h */
NULL, /* 1Ah */
NULL, /* 1Bh */
diff --git a/drivers/message/fusion/mptctl.c b/drivers/message/fusion/mptctl.c
index 878bda0cce7..6e6e16aab9d 100644
--- a/drivers/message/fusion/mptctl.c
+++ b/drivers/message/fusion/mptctl.c
@@ -985,7 +985,7 @@ retry_wait:
ReplyMsg = (pFWDownloadReply_t)iocp->ioctl_cmds.reply;
iocstat = le16_to_cpu(ReplyMsg->IOCStatus) & MPI_IOCSTATUS_MASK;
if (iocstat == MPI_IOCSTATUS_SUCCESS) {
- printk(MYIOC_s_INFO_FMT "F/W update successfull!\n", iocp->name);
+ printk(MYIOC_s_INFO_FMT "F/W update successful!\n", iocp->name);
return 0;
} else if (iocstat == MPI_IOCSTATUS_INVALID_FUNCTION) {
printk(MYIOC_s_WARN_FMT "Hmmm... F/W download not supported!?!\n",
@@ -2407,7 +2407,7 @@ done_free_mem:
}
/* mf is null if command issued successfully
- * otherwise, failure occured after mf acquired.
+ * otherwise, failure occurred after mf acquired.
*/
if (mf)
mpt_free_msg_frame(ioc, mf);
diff --git a/drivers/message/fusion/mptsas.c b/drivers/message/fusion/mptsas.c
index f5a14afad2c..66f94125de4 100644
--- a/drivers/message/fusion/mptsas.c
+++ b/drivers/message/fusion/mptsas.c
@@ -307,7 +307,7 @@ mptsas_requeue_fw_event(MPT_ADAPTER *ioc, struct fw_event_work *fw_event,
spin_unlock_irqrestore(&ioc->fw_event_lock, flags);
}
-/* free memory assoicated to a sas firmware event */
+/* free memory associated to a sas firmware event */
static void
mptsas_free_fw_event(MPT_ADAPTER *ioc, struct fw_event_work *fw_event)
{
@@ -1094,7 +1094,7 @@ mptsas_block_io_starget(struct scsi_target *starget)
/**
* mptsas_target_reset_queue
*
- * Receive request for TARGET_RESET after recieving an firmware
+ * Receive request for TARGET_RESET after receiving an firmware
* event NOT_RESPONDING_EVENT, then put command in link list
* and queue if task_queue already in use.
*
@@ -1403,7 +1403,7 @@ mptsas_sas_enclosure_pg0(MPT_ADAPTER *ioc, struct mptsas_enclosure *enclosure,
/**
* mptsas_add_end_device - report a new end device to sas transport layer
* @ioc: Pointer to MPT_ADAPTER structure
- * @phy_info: decribes attached device
+ * @phy_info: describes attached device
*
* return (0) success (1) failure
*
@@ -1481,7 +1481,7 @@ mptsas_add_end_device(MPT_ADAPTER *ioc, struct mptsas_phyinfo *phy_info)
/**
* mptsas_del_end_device - report a deleted end device to sas transport layer
* @ioc: Pointer to MPT_ADAPTER structure
- * @phy_info: decribes attached device
+ * @phy_info: describes attached device
*
**/
static void
diff --git a/drivers/message/i2o/README b/drivers/message/i2o/README
index 911fc3021e3..f072a8eb304 100644
--- a/drivers/message/i2o/README
+++ b/drivers/message/i2o/README
@@ -53,7 +53,7 @@ Symbios Logic (Now LSI)
BoxHill Corporation
Loan of initial FibreChannel disk array used for development work.
-European Comission
+European Commission
Funding the work done by the University of Helsinki
SysKonnect
diff --git a/drivers/message/i2o/device.c b/drivers/message/i2o/device.c
index 0ee4264f5db..4547db99f7d 100644
--- a/drivers/message/i2o/device.c
+++ b/drivers/message/i2o/device.c
@@ -65,7 +65,7 @@ int i2o_device_claim(struct i2o_device *dev)
rc = i2o_device_issue_claim(dev, I2O_CMD_UTIL_CLAIM, I2O_CLAIM_PRIMARY);
if (!rc)
- pr_debug("i2o: claim of device %d succeded\n",
+ pr_debug("i2o: claim of device %d succeeded\n",
dev->lct_data.tid);
else
pr_debug("i2o: claim of device %d failed %d\n",
@@ -110,7 +110,7 @@ int i2o_device_claim_release(struct i2o_device *dev)
}
if (!rc)
- pr_debug("i2o: claim release of device %d succeded\n",
+ pr_debug("i2o: claim release of device %d succeeded\n",
dev->lct_data.tid);
else
pr_debug("i2o: claim release of device %d failed %d\n",
@@ -248,7 +248,7 @@ static int i2o_device_add(struct i2o_controller *c, i2o_lct_entry *entry)
goto unreg_dev;
}
- /* create user entries refering to this device */
+ /* create user entries referring to this device */
list_for_each_entry(tmp, &c->devices, list)
if ((tmp->lct_data.user_tid == i2o_dev->lct_data.tid)
&& (tmp != i2o_dev)) {
@@ -267,7 +267,7 @@ static int i2o_device_add(struct i2o_controller *c, i2o_lct_entry *entry)
goto rmlink1;
}
- /* create parent entries refering to this device */
+ /* create parent entries referring to this device */
list_for_each_entry(tmp, &c->devices, list)
if ((tmp->lct_data.parent_tid == i2o_dev->lct_data.tid)
&& (tmp != i2o_dev)) {
diff --git a/drivers/message/i2o/i2o_block.c b/drivers/message/i2o/i2o_block.c
index 47ec5bc0ed2..643ad52e3ca 100644
--- a/drivers/message/i2o/i2o_block.c
+++ b/drivers/message/i2o/i2o_block.c
@@ -610,7 +610,7 @@ static int i2o_block_release(struct gendisk *disk, fmode_t mode)
/*
* This is to deail with the case of an application
- * opening a device and then the device dissapears while
+ * opening a device and then the device disappears while
* it's in use, and then the application tries to release
* it. ex: Unmounting a deleted RAID volume at reboot.
* If we send messages, it will just cause FAILs since
@@ -717,7 +717,7 @@ static unsigned int i2o_block_check_events(struct gendisk *disk,
/**
* i2o_block_transfer - Transfer a request to/from the I2O controller
- * @req: the request which should be transfered
+ * @req: the request which should be transferred
*
* This function converts the request into a I2O message. The necessary
* DMA buffers are allocated and after everything is setup post the message
diff --git a/drivers/message/i2o/i2o_block.h b/drivers/message/i2o/i2o_block.h
index 67f921b4419..cf8873cbca3 100644
--- a/drivers/message/i2o/i2o_block.h
+++ b/drivers/message/i2o/i2o_block.h
@@ -73,7 +73,7 @@ struct i2o_block_device {
struct i2o_device *i2o_dev; /* pointer to I2O device */
struct gendisk *gd;
spinlock_t lock; /* queue lock */
- struct list_head open_queue; /* list of transfered, but unfinished
+ struct list_head open_queue; /* list of transferred, but unfinished
requests */
unsigned int open_queue_depth; /* number of requests in the queue */
diff --git a/drivers/message/i2o/i2o_scsi.c b/drivers/message/i2o/i2o_scsi.c
index 97bdf82ec90..f003957e8e1 100644
--- a/drivers/message/i2o/i2o_scsi.c
+++ b/drivers/message/i2o/i2o_scsi.c
@@ -204,7 +204,7 @@ static int i2o_scsi_remove(struct device *dev)
* i2o_scsi_probe - verify if dev is a I2O SCSI device and install it
* @dev: device to verify if it is a I2O SCSI device
*
- * Retrieve channel, id and lun for I2O device. If everthing goes well
+ * Retrieve channel, id and lun for I2O device. If everything goes well
* register the I2O device as SCSI device on the I2O SCSI controller.
*
* Returns 0 on success or negative error code on failure.