diff options
Diffstat (limited to 'drivers/mfd/Kconfig')
| -rw-r--r-- | drivers/mfd/Kconfig | 94 |
1 files changed, 88 insertions, 6 deletions
diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig index c8322eefc86..29f463cc09c 100644 --- a/drivers/mfd/Kconfig +++ b/drivers/mfd/Kconfig @@ -12,6 +12,7 @@ config MFD_CORE config MFD_88PM860X bool "Support Marvell 88PM8606/88PM8607" depends on I2C=y && GENERIC_HARDIRQS + select REGMAP_I2C select MFD_CORE help This supports for Marvell 88PM8606/88PM8607 Power Management IC. @@ -142,6 +143,21 @@ config TPS6507X This driver can also be built as a module. If so, the module will be called tps6507x. +config MFD_TPS65217 + tristate "TPS65217 Power Management / White LED chips" + depends on I2C + select MFD_CORE + select REGMAP_I2C + help + If you say yes here you get support for the TPS65217 series of + Power Management / White LED chips. + These include voltage regulators, lithium ion/polymer battery + charger, wled and other features that are often used in portable + devices. + + This driver can also be built as a module. If so, the module + will be called tps65217. + config MFD_TPS6586X bool "TPS6586x Power Management chips" depends on I2C=y && GPIOLIB && GENERIC_HARDIRQS @@ -161,6 +177,7 @@ config MFD_TPS65910 depends on I2C=y && GPIOLIB select MFD_CORE select GPIO_TPS65910 + select REGMAP_I2C help if you say yes here you get support for the TPS65910 series of Power Management chips. @@ -170,7 +187,7 @@ config MFD_TPS65912 depends on GPIOLIB config MFD_TPS65912_I2C - bool "TPS95612 Power Management chip with I2C" + bool "TPS65912 Power Management chip with I2C" select MFD_CORE select MFD_TPS65912 depends on I2C=y && GPIOLIB @@ -200,6 +217,7 @@ config MENELAUS config TWL4030_CORE bool "Texas Instruments TWL4030/TWL5030/TWL6030/TPS659x0 Support" depends on I2C=y && GENERIC_HARDIRQS + select IRQ_DOMAIN help Say yes here if you have TWL4030 / TWL6030 family chip on your board. This core driver provides register access and IRQ handling @@ -257,7 +275,7 @@ config TWL6040_CORE config MFD_STMPE bool "Support STMicroelectronics STMPE" - depends on I2C=y && GENERIC_HARDIRQS + depends on (I2C=y || SPI_MASTER=y) && GENERIC_HARDIRQS select MFD_CORE help Support for the STMPE family of I/O Expanders from @@ -278,6 +296,23 @@ config MFD_STMPE Keypad: stmpe-keypad Touchscreen: stmpe-ts +menu "STMPE Interface Drivers" +depends on MFD_STMPE + +config STMPE_I2C + bool "STMPE I2C Inteface" + depends on I2C=y + default y + help + This is used to enable I2C interface of STMPE + +config STMPE_SPI + bool "STMPE SPI Inteface" + depends on SPI_MASTER + help + This is used to enable SPI interface of STMPE +endmenu + config MFD_TC3589X bool "Support Toshiba TC35892 and variants" depends on I2C=y && GENERIC_HARDIRQS @@ -311,7 +346,7 @@ config MFD_TC6387XB config MFD_TC6393XB bool "Support Toshiba TC6393XB" - depends on GPIOLIB && ARM + depends on GPIOLIB && ARM && HAVE_CLK select MFD_CORE select MFD_TMIO help @@ -381,7 +416,7 @@ config MFD_MAX8997 depends on I2C=y && GENERIC_HARDIRQS select MFD_CORE help - Say yes here to support for Maxim Semiconductor MAX8998/8966. + Say yes here to support for Maxim Semiconductor MAX8997/8966. This is a Power Management IC with RTC, Flash, Fuel Gauge, Haptic, MUIC controls on chip. This driver provides common support for accessing the device; @@ -399,6 +434,17 @@ config MFD_MAX8998 additional drivers must be enabled in order to use the functionality of the device. +config MFD_S5M_CORE + bool "SAMSUNG S5M Series Support" + depends on I2C=y && GENERIC_HARDIRQS + select MFD_CORE + select REGMAP_I2C + help + Support for the Samsung Electronics S5M MFD series. + This driver provies common support for accessing the device, + additional drivers must be enabled in order to use the functionality + of the device + config MFD_WM8400 tristate "Support Wolfson Microelectronics WM8400" select MFD_CORE @@ -505,6 +551,7 @@ config MFD_WM8994 bool "Support Wolfson Microelectronics WM8994" select MFD_CORE select REGMAP_I2C + select REGMAP_IRQ depends on I2C=y && GENERIC_HARDIRQS help The WM8994 is a highly integrated hi-fi CODEC designed for @@ -781,6 +828,18 @@ config MFD_PM8XXX_IRQ config TPS65911_COMPARATOR tristate +config MFD_TPS65090 + bool "TPS65090 Power Management chips" + depends on I2C=y && GENERIC_HARDIRQS + select MFD_CORE + select REGMAP_I2C + help + If you say yes here you get support for the TPS65090 series of + Power Management chips. + This driver provides common support for accessing the device, + additional drivers must be enabled in order to use the + functionality of the device. + config MFD_AAT2870_CORE bool "Support for the AnalogicTech AAT2870" select MFD_CORE @@ -800,6 +859,28 @@ config MFD_INTEL_MSIC Passage) chip. This chip embeds audio, battery, GPIO, etc. devices used in Intel Medfield platforms. +config MFD_RC5T583 + bool "Ricoh RC5T583 Power Management system device" + depends on I2C=y && GENERIC_HARDIRQS + select MFD_CORE + select REGMAP_I2C + help + Select this option to get support for the RICOH583 Power + Management system device. + This driver provides common support for accessing the device + through i2c interface. The device supports multiple sub-devices + like GPIO, interrupts, RTC, LDO and DCDC regulators, onkey. + Additional drivers must be enabled in order to use the + different functionality of the device. + +config MFD_ANATOP + bool "Support for Freescale i.MX on-chip ANATOP controller" + depends on SOC_IMX6Q + help + Select this option to enable Freescale i.MX on-chip ANATOP + MFD controller. This controller embeds regulator and + thermal devices for Freescale i.MX platforms. + endmenu endif @@ -817,8 +898,9 @@ config MCP_SA11X0 # Chip drivers config MCP_UCB1200 - tristate "Support for UCB1200 / UCB1300" - depends on MCP + bool "Support for UCB1200 / UCB1300" + depends on MCP_SA11X0 + select MCP config MCP_UCB1200_TS tristate "Touchscreen interface support" |