diff options
Diffstat (limited to 'drivers/mfd/Kconfig')
| -rw-r--r-- | drivers/mfd/Kconfig | 78 |
1 files changed, 60 insertions, 18 deletions
diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig index d1facef28a6..acab3ef8a31 100644 --- a/drivers/mfd/Kconfig +++ b/drivers/mfd/Kconfig @@ -298,16 +298,6 @@ config MFD_TWL4030_AUDIO select MFD_CORE default n -config TWL6030_PWM - tristate "TWL6030 PWM (Pulse Width Modulator) Support" - depends on TWL4030_CORE - select HAVE_PWM - depends on !PWM - default n - help - Say yes here if you want support for TWL6030 PWM. - This is used to control charging LED brightness. - config TWL6040_CORE bool "Support for TWL6040 audio codec" depends on I2C=y && GENERIC_HARDIRQS @@ -385,6 +375,18 @@ config MFD_T7L66XB help Support for Toshiba Mobile IO Controller T7L66XB +config MFD_SMSC + bool "Support for the SMSC ECE1099 series chips" + depends on I2C=y + select MFD_CORE + select REGMAP_I2C + help + If you say yes here you get support for the + ece1099 chips from SMSC. + + To compile this driver as a module, choose M here: the + module will be called smsc. + config MFD_TC6387XB bool "Support Toshiba TC6387XB" depends on ARM && HAVE_CLK @@ -395,7 +397,8 @@ config MFD_TC6387XB config MFD_TC6393XB bool "Support Toshiba TC6393XB" - depends on GPIOLIB && ARM && HAVE_CLK + depends on ARM && HAVE_CLK + select GPIOLIB select MFD_CORE select MFD_TMIO help @@ -440,6 +443,23 @@ config MFD_DA9052_I2C for accessing the device, additional drivers must be enabled in order to use the functionality of the device. +config MFD_DA9055 + bool "Dialog Semiconductor DA9055 PMIC Support" + select REGMAP_I2C + select REGMAP_IRQ + select PMIC_DA9055 + select MFD_CORE + depends on I2C=y + help + Say yes here for support of Dialog Semiconductor DA9055. This is + a Power Management IC. This driver provides common support for + accessing the device as well as the I2C interface to the chip itself. + Additional drivers must be enabled in order to use the functionality + of the device. + + This driver can be built as a module. If built as a module it will be + called "da9055" + config PMIC_ADP5520 bool "Analog Devices ADP5520/01 MFD PMIC Core Support" depends on I2C=y @@ -450,6 +470,16 @@ config PMIC_ADP5520 individual components like LCD backlight, LEDs, GPIOs and Kepad under the corresponding menus. +config MFD_LP8788 + bool "Texas Instruments LP8788 Power Management Unit Driver" + depends on I2C=y + select MFD_CORE + select REGMAP_I2C + select IRQ_DOMAIN + help + TI LP8788 PMU supports regulators, battery charger, RTC, + ADC, backlight driver and current sinks. + config MFD_MAX77686 bool "Maxim Semiconductor MAX77686 PMIC Support" depends on I2C=y && GENERIC_HARDIRQS @@ -476,6 +506,18 @@ config MFD_MAX77693 additional drivers must be enabled in order to use the functionality of the device. +config MFD_MAX8907 + tristate "Maxim Semiconductor MAX8907 PMIC Support" + select MFD_CORE + depends on I2C=y && GENERIC_HARDIRQS + select REGMAP_I2C + select REGMAP_IRQ + help + Say yes here to support for Maxim Semiconductor MAX8907. This is + a Power Management IC. This driver provides common support for + accessing the device; additional drivers must be enabled in order + to use the functionality of the device. + config MFD_MAX8925 bool "Maxim Semiconductor MAX8925 PMIC Support" depends on I2C=y && GENERIC_HARDIRQS @@ -895,7 +937,7 @@ config MFD_WL1273_CORE audio codec. config MFD_OMAP_USB_HOST - bool "Support OMAP USBHS core driver" + bool "Support OMAP USBHS core and TLL driver" depends on USB_EHCI_HCD_OMAP || USB_OHCI_HCD_OMAP3 default y help @@ -984,13 +1026,13 @@ config MFD_STA2X11 depends on STA2X11 select MFD_CORE -config MFD_ANATOP - bool "Support for Freescale i.MX on-chip ANATOP controller" - depends on SOC_IMX6Q +config MFD_SYSCON + bool "System Controller Register R/W Based on Regmap" + depends on OF + select REGMAP_MMIO help - Select this option to enable Freescale i.MX on-chip ANATOP - MFD controller. This controller embeds regulator and - thermal devices for Freescale i.MX platforms. + Select this option to enable accessing system control registers + via regmap. config MFD_PALMAS bool "Support for the TI Palmas series chips" |