diff options
Diffstat (limited to 'drivers/mfd/Kconfig')
| -rw-r--r-- | drivers/mfd/Kconfig | 84 |
1 files changed, 67 insertions, 17 deletions
diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig index 87829789243..951fa9b93fb 100644 --- a/drivers/mfd/Kconfig +++ b/drivers/mfd/Kconfig @@ -9,6 +9,16 @@ config MFD_CORE tristate default n +config MFD_88PM860X + bool "Support Marvell 88PM8606/88PM8607" + depends on I2C=y + select MFD_CORE + help + This supports for Marvell 88PM8606/88PM8607 Power Management IC. + This includes the I2C driver and the core APIs _only_, you have to + select individual components like voltage regulators, RTC and + battery-charger under the corresponding menus. + config MFD_SM501 tristate "Support for Silicon Motion SM501" ---help--- @@ -37,7 +47,7 @@ config MFD_ASIC3 config MFD_SH_MOBILE_SDHI bool "Support for SuperH Mobile SDHI" - depends on SUPERH + depends on SUPERH || ARCH_SHMOBILE select MFD_CORE ---help--- This driver supports the SDHI hardware block found in many @@ -68,6 +78,15 @@ config HTC_PASIC3 HTC Magician devices, respectively. Actual functionality is handled by the leds-pasic3 and ds1wm drivers. +config HTC_I2CPLD + bool "HTC I2C PLD chip support" + depends on I2C=y && GPIOLIB + help + If you say yes here you get support for the supposed CPLD + found on omap850 HTC devices like the HTC Wizard and HTC Herald. + This device provides input and output GPIOs through an I2C + interface to one or more sub-chips. + config UCB1400_CORE tristate "Philips UCB1400 Core driver" depends on AC97_BUS @@ -94,7 +113,7 @@ config TPS65010 config MENELAUS bool "Texas Instruments TWL92330/Menelaus PM chip" - depends on I2C=y && ARCH_OMAP24XX + depends on I2C=y && ARCH_OMAP2 help If you say yes here you get support for the Texas Instruments TWL92330/Menelaus Power Management chip. This include voltage @@ -184,6 +203,16 @@ config PMIC_ADP5520 individual components like LCD backlight, LEDs, GPIOs and Kepad under the corresponding menus. +config MFD_MAX8925 + bool "Maxim Semiconductor MAX8925 PMIC Support" + depends on I2C=y + select MFD_CORE + help + Say yes here to support for Maxim Semiconductor MAX8925. This is + a Power Management IC. This driver provies common support for + accessing the device, additional drivers must be enabled in order + to use the functionality of the device. + config MFD_WM8400 tristate "Support Wolfson Microelectronics WM8400" select MFD_CORE @@ -205,7 +234,7 @@ config MFD_WM831X functionality of the device. config MFD_WM8350 - tristate + bool config MFD_WM8350_CONFIG_MODE_0 bool @@ -256,9 +285,9 @@ config MFD_WM8352_CONFIG_MODE_3 depends on MFD_WM8350 config MFD_WM8350_I2C - tristate "Support Wolfson Microelectronics WM8350 with I2C" + bool "Support Wolfson Microelectronics WM8350 with I2C" select MFD_WM8350 - depends on I2C + depends on I2C=y help The WM8350 is an integrated audio and power management subsystem with watchdog and RTC functionality for embedded @@ -266,6 +295,18 @@ config MFD_WM8350_I2C I2C as the control interface. Additional options must be selected to enable support for the functionality of the chip. +config MFD_WM8994 + tristate "Support Wolfson Microelectronics WM8994" + select MFD_CORE + depends on I2C + help + The WM8994 is a highly integrated hi-fi CODEC designed for + smartphone applicatiosn. As well as audio functionality it + has on board GPIO and regulator functionality which is + supported via the relevant subsystems. This driver provides + core support for the WM8994, in order to use the actual + functionaltiy of the device other drivers must be enabled. + config MFD_PCF50633 tristate "Support for NXP PCF50633" depends on I2C @@ -300,8 +341,8 @@ config PCF50633_GPIO the PCF50633 chip. config AB3100_CORE - tristate "ST-Ericsson AB3100 Mixed Signal Circuit core functions" - depends on I2C + bool "ST-Ericsson AB3100 Mixed Signal Circuit core functions" + depends on I2C=y default y if ARCH_U300 help Select this to enable the AB3100 Mixed Signal IC core @@ -329,16 +370,6 @@ config EZX_PCAP This enables the PCAP ASIC present on EZX Phones. This is needed for MMC, TouchScreen, Sound, USB, etc.. -config MFD_88PM8607 - bool "Support Marvell 88PM8607" - depends on I2C=y - select MFD_CORE - help - This supports for Marvell 88PM8607 Power Management IC. This includes - the I2C driver and the core APIs _only_, you have to select - individual components like voltage regulators, RTC and - battery-charger under the corresponding menus. - config AB4500_CORE tristate "ST-Ericsson's AB4500 Mixed Signal Power management chip" depends on SPI @@ -348,6 +379,25 @@ config AB4500_CORE read/write functions for the devices to get access to this chip. This chip embeds various other multimedia funtionalities as well. +config MFD_TIMBERDALE + tristate "Support for the Timberdale FPGA" + select MFD_CORE + depends on PCI && GPIOLIB + ---help--- + This is the core driver for the timberdale FPGA. This device is a + multifunction device which exposes numerous platform devices. + + The timberdale FPGA can be found on the Intel Atom development board + for in-vehicle infontainment, called Russellville. + +config LPC_SCH + tristate "Intel SCH LPC" + depends on PCI + select MFD_CORE + help + LPC bridge function of the Intel SCH provides support for + System Management Bus and General Purpose I/O. + endmenu menu "Multimedia Capabilities Port drivers" |