summaryrefslogtreecommitdiffstats
path: root/drivers/mfd/ab8500-core.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/mfd/ab8500-core.c')
-rw-r--r--drivers/mfd/ab8500-core.c82
1 files changed, 72 insertions, 10 deletions
diff --git a/drivers/mfd/ab8500-core.c b/drivers/mfd/ab8500-core.c
index b6887014d68..67d01c93828 100644
--- a/drivers/mfd/ab8500-core.c
+++ b/drivers/mfd/ab8500-core.c
@@ -4,7 +4,7 @@
* License Terms: GNU General Public License v2
* Author: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com>
* Author: Rabin Vincent <rabin.vincent@stericsson.com>
- * Changes: Mattias Wallin <mattias.wallin@stericsson.com>
+ * Author: Mattias Wallin <mattias.wallin@stericsson.com>
*/
#include <linux/kernel.h>
@@ -90,6 +90,7 @@
#define AB8500_IT_MASK24_REG 0x57
#define AB8500_REV_REG 0x80
+#define AB8500_SWITCH_OFF_STATUS 0x00
/*
* Map interrupt numbers to the LATCH and MASK register offsets, Interrupt
@@ -333,14 +334,14 @@ static int ab8500_irq_init(struct ab8500 *ab8500)
int irq;
for (irq = base; irq < base + AB8500_NR_IRQS; irq++) {
- set_irq_chip_data(irq, ab8500);
- set_irq_chip_and_handler(irq, &ab8500_irq_chip,
+ irq_set_chip_data(irq, ab8500);
+ irq_set_chip_and_handler(irq, &ab8500_irq_chip,
handle_simple_irq);
- set_irq_nested_thread(irq, 1);
+ irq_set_nested_thread(irq, 1);
#ifdef CONFIG_ARM
set_irq_flags(irq, IRQF_VALID);
#else
- set_irq_noprobe(irq);
+ irq_set_noprobe(irq);
#endif
}
@@ -356,11 +357,20 @@ static void ab8500_irq_remove(struct ab8500 *ab8500)
#ifdef CONFIG_ARM
set_irq_flags(irq, 0);
#endif
- set_irq_chip_and_handler(irq, NULL, NULL);
- set_irq_chip_data(irq, NULL);
+ irq_set_chip_and_handler(irq, NULL, NULL);
+ irq_set_chip_data(irq, NULL);
}
}
+static struct resource ab8500_gpio_resources[] = {
+ {
+ .name = "GPIO_INT6",
+ .start = AB8500_INT_GPIO6R,
+ .end = AB8500_INT_GPIO41F,
+ .flags = IORESOURCE_IRQ,
+ }
+};
+
static struct resource ab8500_gpadc_resources[] = {
{
.name = "HW_CONV_END",
@@ -595,6 +605,11 @@ static struct mfd_cell ab8500_devs[] = {
.name = "ab8500-regulator",
},
{
+ .name = "ab8500-gpio",
+ .num_resources = ARRAY_SIZE(ab8500_gpio_resources),
+ .resources = ab8500_gpio_resources,
+ },
+ {
.name = "ab8500-gpadc",
.num_resources = ARRAY_SIZE(ab8500_gpadc_resources),
.resources = ab8500_gpadc_resources,
@@ -652,10 +667,38 @@ static ssize_t show_chip_id(struct device *dev,
return sprintf(buf, "%#x\n", ab8500 ? ab8500->chip_id : -EINVAL);
}
+/*
+ * ab8500 has switched off due to (SWITCH_OFF_STATUS):
+ * 0x01 Swoff bit programming
+ * 0x02 Thermal protection activation
+ * 0x04 Vbat lower then BattOk falling threshold
+ * 0x08 Watchdog expired
+ * 0x10 Non presence of 32kHz clock
+ * 0x20 Battery level lower than power on reset threshold
+ * 0x40 Power on key 1 pressed longer than 10 seconds
+ * 0x80 DB8500 thermal shutdown
+ */
+static ssize_t show_switch_off_status(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ int ret;
+ u8 value;
+ struct ab8500 *ab8500;
+
+ ab8500 = dev_get_drvdata(dev);
+ ret = get_register_interruptible(ab8500, AB8500_RTC,
+ AB8500_SWITCH_OFF_STATUS, &value);
+ if (ret < 0)
+ return ret;
+ return sprintf(buf, "%#x\n", value);
+}
+
static DEVICE_ATTR(chip_id, S_IRUGO, show_chip_id, NULL);
+static DEVICE_ATTR(switch_off_status, S_IRUGO, show_switch_off_status, NULL);
static struct attribute *ab8500_sysfs_entries[] = {
&dev_attr_chip_id.attr,
+ &dev_attr_switch_off_status.attr,
NULL,
};
@@ -686,9 +729,10 @@ int __devinit ab8500_init(struct ab8500 *ab8500)
* 0x10 - Cut 1.0
* 0x11 - Cut 1.1
* 0x20 - Cut 2.0
+ * 0x30 - Cut 3.0
*/
- if (value == 0x0 || value == 0x10 || value == 0x11 || value == 0x20) {
- ab8500->revision = value;
+ if (value == 0x0 || value == 0x10 || value == 0x11 || value == 0x20 ||
+ value == 0x30) {
dev_info(ab8500->dev, "detected chip, revision: %#x\n", value);
} else {
dev_err(ab8500->dev, "unknown chip, revision: %#x\n", value);
@@ -696,6 +740,24 @@ int __devinit ab8500_init(struct ab8500 *ab8500)
}
ab8500->chip_id = value;
+ /*
+ * ab8500 has switched off due to (SWITCH_OFF_STATUS):
+ * 0x01 Swoff bit programming
+ * 0x02 Thermal protection activation
+ * 0x04 Vbat lower then BattOk falling threshold
+ * 0x08 Watchdog expired
+ * 0x10 Non presence of 32kHz clock
+ * 0x20 Battery level lower than power on reset threshold
+ * 0x40 Power on key 1 pressed longer than 10 seconds
+ * 0x80 DB8500 thermal shutdown
+ */
+
+ ret = get_register_interruptible(ab8500, AB8500_RTC,
+ AB8500_SWITCH_OFF_STATUS, &value);
+ if (ret < 0)
+ return ret;
+ dev_info(ab8500->dev, "switch off status: %#x", value);
+
if (plat && plat->init)
plat->init(ab8500);
@@ -764,6 +826,6 @@ int __devexit ab8500_exit(struct ab8500 *ab8500)
return 0;
}
-MODULE_AUTHOR("Srinidhi Kasagar, Rabin Vincent");
+MODULE_AUTHOR("Mattias Wallin, Srinidhi Kasagar, Rabin Vincent");
MODULE_DESCRIPTION("AB8500 MFD core");
MODULE_LICENSE("GPL v2");