1 files changed, 0 insertions, 57 deletions
diff --git a/drivers/mfd/ab8500-sysctrl.c b/drivers/mfd/ab8500-sysctrl.c
index 8e0dae59844..94dbcdd2a1f 100644
--- a/drivers/mfd/ab8500-sysctrl.c
+++ b/drivers/mfd/ab8500-sysctrl.c
@@ -85,63 +85,6 @@ shutdown:
 	}
 }
 
-/*
- * Use the AB WD to reset the platform. It will perform a hard
- * reset instead of a soft reset. Write the reset reason to
- * the AB before reset, which can be read upon restart.
- */
-void ab8500_restart(char mode, const char *cmd)
-{
-	struct ab8500_platform_data *plat;
-	struct ab8500_sysctrl_platform_data *pdata;
-	u16 reason = 0;
-	u8 val;
-
-	if (sysctrl_dev == NULL) {
-		pr_err("%s: sysctrl not initialized\n", __func__);
-		return;
-	}
-
-	plat = dev_get_platdata(sysctrl_dev->parent);
-	pdata = plat->sysctrl;
-	if (pdata && pdata->reboot_reason_code)
-		reason = pdata->reboot_reason_code(cmd);
-	else
-		pr_warn("[%s] No reboot reason set. Default reason %d\n",
-			__func__, reason);
-
-	/*
-	 * Disable RTC alarm, just a precaution so that no alarm
-	 * is running when WD reset is executed.
-	 */
-	abx500_get_register_interruptible(sysctrl_dev, AB8500_RTC,
-		RTC_CTRL , &val);
-	abx500_set_register_interruptible(sysctrl_dev, AB8500_RTC,
-		RTC_CTRL , (val & ~RTC_ALARM_ENABLE));
-
-	/*
-	 * Android is not using the RTC alarm registers during reboot
-	 * so we borrow them for writing the reason of reset
-	 */
-
-	/* reason[8 LSB] */
-	val = reason & 0xFF;
-	abx500_set_register_interruptible(sysctrl_dev, AB8500_RTC,
-		AB8500_ALARM_MIN_LOW , val);
-
-	/* reason[8 MSB] */
-	val = (reason>>8) & 0xFF;
-	abx500_set_register_interruptible(sysctrl_dev, AB8500_RTC,
-		AB8500_ALARM_MIN_MID , val);
-
-	/* Setting WD timeout to 0 */
-	ab8500_sysctrl_write(AB8500_MAINWDOGTIMER, 0xFF, 0x0);
-
-	/* Setting the parameters to AB8500 WD*/
-	ab8500_sysctrl_write(AB8500_MAINWDOGCTRL, 0xFF, (AB8500_ENABLE_WD |
-		AB8500_WD_RESTART_ON_EXPIRE | AB8500_KICK_WD));
-}
-
 static inline bool valid_bank(u8 bank)
 {
 	return ((bank == AB8500_SYS_CTRL1_BLOCK) ||