summaryrefslogtreecommitdiffstats
path: root/drivers/mfd/rts5229.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/mfd/rts5229.c')
-rw-r--r--drivers/mfd/rts5229.c53
1 files changed, 48 insertions, 5 deletions
diff --git a/drivers/mfd/rts5229.c b/drivers/mfd/rts5229.c
index 58af4dbe358..6353f5df087 100644
--- a/drivers/mfd/rts5229.c
+++ b/drivers/mfd/rts5229.c
@@ -1,6 +1,6 @@
/* Driver for Realtek PCI-Express card reader
*
- * Copyright(c) 2009 Realtek Semiconductor Corp. All rights reserved.
+ * Copyright(c) 2009-2013 Realtek Semiconductor Corp. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
@@ -17,7 +17,6 @@
*
* Author:
* Wei WANG <wei_wang@realsil.com.cn>
- * No. 450, Shenhu Road, Suzhou Industry Park, Suzhou, China
*/
#include <linux/module.h>
@@ -34,17 +33,51 @@ static u8 rts5229_get_ic_version(struct rtsx_pcr *pcr)
return val & 0x0F;
}
+static void rts5229_fetch_vendor_settings(struct rtsx_pcr *pcr)
+{
+ u32 reg;
+
+ rtsx_pci_read_config_dword(pcr, PCR_SETTING_REG1, &reg);
+ dev_dbg(&(pcr->pci->dev), "Cfg 0x%x: 0x%x\n", PCR_SETTING_REG1, reg);
+
+ if (!rtsx_vendor_setting_valid(reg))
+ return;
+
+ pcr->aspm_en = rtsx_reg_to_aspm(reg);
+ pcr->sd30_drive_sel_1v8 =
+ map_sd_drive(rtsx_reg_to_sd30_drive_sel_1v8(reg));
+ pcr->card_drive_sel &= 0x3F;
+ pcr->card_drive_sel |= rtsx_reg_to_card_drive_sel(reg);
+
+ rtsx_pci_read_config_dword(pcr, PCR_SETTING_REG2, &reg);
+ dev_dbg(&(pcr->pci->dev), "Cfg 0x%x: 0x%x\n", PCR_SETTING_REG2, reg);
+ pcr->sd30_drive_sel_3v3 =
+ map_sd_drive(rtsx_reg_to_sd30_drive_sel_3v3(reg));
+}
+
+static void rts5229_force_power_down(struct rtsx_pcr *pcr, u8 pm_state)
+{
+ rtsx_pci_write_register(pcr, FPDCTL, 0x03, 0x03);
+}
+
static int rts5229_extra_init_hw(struct rtsx_pcr *pcr)
{
rtsx_pci_init_cmd(pcr);
/* Configure GPIO as output */
rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, GPIO_CTL, 0x02, 0x02);
+ /* Reset ASPM state to default value */
+ rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, ASPM_FORCE_CTL, 0x3F, 0);
+ /* Force CLKREQ# PIN to drive 0 to request clock */
+ rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, PETXCFG, 0x08, 0x08);
/* Switch LDO3318 source from DV33 to card_3v3 */
rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, LDO_PWR_SEL, 0x03, 0x00);
rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, LDO_PWR_SEL, 0x03, 0x01);
/* LED shine disabled, set initial shine cycle period */
rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, OLT_LED_CTL, 0x0F, 0x02);
+ /* Configure driving */
+ rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, SD30_DRIVE_SEL,
+ 0xFF, pcr->sd30_drive_sel_3v3);
return rtsx_pci_send_cmd(pcr, 100);
}
@@ -110,7 +143,7 @@ static int rts5229_card_power_off(struct rtsx_pcr *pcr, int card)
SD_POWER_MASK | PMOS_STRG_MASK,
SD_POWER_OFF | PMOS_STRG_400mA);
rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, PWR_GATE_CTRL,
- LDO3318_PWR_MASK, 0X00);
+ LDO3318_PWR_MASK, 0x00);
return rtsx_pci_send_cmd(pcr, 100);
}
@@ -120,7 +153,7 @@ static int rts5229_switch_output_voltage(struct rtsx_pcr *pcr, u8 voltage)
if (voltage == OUTPUT_3V3) {
err = rtsx_pci_write_register(pcr,
- SD30_DRIVE_SEL, 0x07, DRIVER_TYPE_D);
+ SD30_DRIVE_SEL, 0x07, pcr->sd30_drive_sel_3v3);
if (err < 0)
return err;
err = rtsx_pci_write_phy_register(pcr, 0x08, 0x4FC0 | 0x24);
@@ -128,7 +161,7 @@ static int rts5229_switch_output_voltage(struct rtsx_pcr *pcr, u8 voltage)
return err;
} else if (voltage == OUTPUT_1V8) {
err = rtsx_pci_write_register(pcr,
- SD30_DRIVE_SEL, 0x07, DRIVER_TYPE_B);
+ SD30_DRIVE_SEL, 0x07, pcr->sd30_drive_sel_1v8);
if (err < 0)
return err;
err = rtsx_pci_write_phy_register(pcr, 0x08, 0x4C40 | 0x24);
@@ -142,6 +175,7 @@ static int rts5229_switch_output_voltage(struct rtsx_pcr *pcr, u8 voltage)
}
static const struct pcr_ops rts5229_pcr_ops = {
+ .fetch_vendor_settings = rts5229_fetch_vendor_settings,
.extra_init_hw = rts5229_extra_init_hw,
.optimize_phy = rts5229_optimize_phy,
.turn_on_led = rts5229_turn_on_led,
@@ -153,6 +187,7 @@ static const struct pcr_ops rts5229_pcr_ops = {
.switch_output_voltage = rts5229_switch_output_voltage,
.cd_deglitch = NULL,
.conv_clk_and_div_n = NULL,
+ .force_power_down = rts5229_force_power_down,
};
/* SD Pull Control Enable:
@@ -221,6 +256,14 @@ void rts5229_init_params(struct rtsx_pcr *pcr)
pcr->num_slots = 2;
pcr->ops = &rts5229_pcr_ops;
+ pcr->flags = 0;
+ pcr->card_drive_sel = RTSX_CARD_DRIVE_DEFAULT;
+ pcr->sd30_drive_sel_1v8 = DRIVER_TYPE_B;
+ pcr->sd30_drive_sel_3v3 = DRIVER_TYPE_D;
+ pcr->aspm_en = ASPM_L1_EN;
+ pcr->tx_initial_phase = SET_CLOCK_PHASE(27, 27, 15);
+ pcr->rx_initial_phase = SET_CLOCK_PHASE(30, 6, 6);
+
pcr->ic_version = rts5229_get_ic_version(pcr);
if (pcr->ic_version == IC_VER_C) {
pcr->sd_pull_ctl_enable_tbl = rts5229_sd_pull_ctl_enable_tbl2;