diff options
Diffstat (limited to 'drivers/mfd/tps6105x.c')
| -rw-r--r-- | drivers/mfd/tps6105x.c | 246 |
1 files changed, 246 insertions, 0 deletions
diff --git a/drivers/mfd/tps6105x.c b/drivers/mfd/tps6105x.c new file mode 100644 index 00000000000..46d8205646b --- /dev/null +++ b/drivers/mfd/tps6105x.c @@ -0,0 +1,246 @@ +/* + * Core driver for TPS61050/61052 boost converters, used for while LED + * driving, audio power amplification, white LED flash, and generic + * boost conversion. Additionally it provides a 1-bit GPIO pin (out or in) + * and a flash synchronization pin to synchronize flash events when used as + * flashgun. + * + * Copyright (C) 2011 ST-Ericsson SA + * Written on behalf of Linaro for ST-Ericsson + * + * Author: Linus Walleij <linus.walleij@linaro.org> + * + * License terms: GNU General Public License (GPL) version 2 + */ + +#include <linux/module.h> +#include <linux/init.h> +#include <linux/i2c.h> +#include <linux/mutex.h> +#include <linux/gpio.h> +#include <linux/spinlock.h> +#include <linux/slab.h> +#include <linux/err.h> +#include <linux/regulator/driver.h> +#include <linux/mfd/core.h> +#include <linux/mfd/tps6105x.h> + +int tps6105x_set(struct tps6105x *tps6105x, u8 reg, u8 value) +{ + int ret; + + ret = mutex_lock_interruptible(&tps6105x->lock); + if (ret) + return ret; + ret = i2c_smbus_write_byte_data(tps6105x->client, reg, value); + mutex_unlock(&tps6105x->lock); + if (ret < 0) + return ret; + + return 0; +} +EXPORT_SYMBOL(tps6105x_set); + +int tps6105x_get(struct tps6105x *tps6105x, u8 reg, u8 *buf) +{ + int ret; + + ret = mutex_lock_interruptible(&tps6105x->lock); + if (ret) + return ret; + ret = i2c_smbus_read_byte_data(tps6105x->client, reg); + mutex_unlock(&tps6105x->lock); + if (ret < 0) + return ret; + + *buf = ret; + return 0; +} +EXPORT_SYMBOL(tps6105x_get); + +/* + * Masks off the bits in the mask and sets the bits in the bitvalues + * parameter in one atomic operation + */ +int tps6105x_mask_and_set(struct tps6105x *tps6105x, u8 reg, + u8 bitmask, u8 bitvalues) +{ + int ret; + u8 regval; + + ret = mutex_lock_interruptible(&tps6105x->lock); + if (ret) + return ret; + ret = i2c_smbus_read_byte_data(tps6105x->client, reg); + if (ret < 0) + goto fail; + regval = ret; + regval = (~bitmask & regval) | (bitmask & bitvalues); + ret = i2c_smbus_write_byte_data(tps6105x->client, reg, regval); +fail: + mutex_unlock(&tps6105x->lock); + if (ret < 0) + return ret; + + return 0; +} +EXPORT_SYMBOL(tps6105x_mask_and_set); + +static int __devinit tps6105x_startup(struct tps6105x *tps6105x) +{ + int ret; + u8 regval; + + ret = tps6105x_get(tps6105x, TPS6105X_REG_0, ®val); + if (ret) + return ret; + switch (regval >> TPS6105X_REG0_MODE_SHIFT) { + case TPS6105X_REG0_MODE_SHUTDOWN: + dev_info(&tps6105x->client->dev, + "TPS6105x found in SHUTDOWN mode\n"); + break; + case TPS6105X_REG0_MODE_TORCH: + dev_info(&tps6105x->client->dev, + "TPS6105x found in TORCH mode\n"); + break; + case TPS6105X_REG0_MODE_TORCH_FLASH: + dev_info(&tps6105x->client->dev, + "TPS6105x found in FLASH mode\n"); + break; + case TPS6105X_REG0_MODE_VOLTAGE: + dev_info(&tps6105x->client->dev, + "TPS6105x found in VOLTAGE mode\n"); + break; + default: + break; + } + + return ret; +} + +/* + * MFD cells - we have one cell which is selected operation + * mode, and we always have a GPIO cell. + */ +static struct mfd_cell tps6105x_cells[] = { + { + /* name will be runtime assigned */ + .id = -1, + }, + { + .name = "tps6105x-gpio", + .id = -1, + }, +}; + +static int __devinit tps6105x_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct tps6105x *tps6105x; + struct tps6105x_platform_data *pdata; + int ret; + int i; + + tps6105x = kmalloc(sizeof(*tps6105x), GFP_KERNEL); + if (!tps6105x) + return -ENOMEM; + + i2c_set_clientdata(client, tps6105x); + tps6105x->client = client; + pdata = client->dev.platform_data; + tps6105x->pdata = pdata; + mutex_init(&tps6105x->lock); + + ret = tps6105x_startup(tps6105x); + if (ret) { + dev_err(&client->dev, "chip initialization failed\n"); + goto fail; + } + + /* Remove warning texts when you implement new cell drivers */ + switch (pdata->mode) { + case TPS6105X_MODE_SHUTDOWN: + dev_info(&client->dev, + "present, not used for anything, only GPIO\n"); + break; + case TPS6105X_MODE_TORCH: + tps6105x_cells[0].name = "tps6105x-leds"; + dev_warn(&client->dev, + "torch mode is unsupported\n"); + break; + case TPS6105X_MODE_TORCH_FLASH: + tps6105x_cells[0].name = "tps6105x-flash"; + dev_warn(&client->dev, + "flash mode is unsupported\n"); + break; + case TPS6105X_MODE_VOLTAGE: + tps6105x_cells[0].name ="tps6105x-regulator"; + break; + default: + break; + } + + /* Set up and register the platform devices. */ + for (i = 0; i < ARRAY_SIZE(tps6105x_cells); i++) { + /* One state holder for all drivers, this is simple */ + tps6105x_cells[i].mfd_data = tps6105x; + } + + ret = mfd_add_devices(&client->dev, 0, tps6105x_cells, + ARRAY_SIZE(tps6105x_cells), NULL, 0); + if (ret) + goto fail; + + return 0; + +fail: + kfree(tps6105x); + return ret; +} + +static int __devexit tps6105x_remove(struct i2c_client *client) +{ + struct tps6105x *tps6105x = i2c_get_clientdata(client); + + mfd_remove_devices(&client->dev); + + /* Put chip in shutdown mode */ + tps6105x_mask_and_set(tps6105x, TPS6105X_REG_0, + TPS6105X_REG0_MODE_MASK, + TPS6105X_MODE_SHUTDOWN << TPS6105X_REG0_MODE_SHIFT); + + kfree(tps6105x); + return 0; +} + +static const struct i2c_device_id tps6105x_id[] = { + { "tps61050", 0 }, + { "tps61052", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, tps6105x_id); + +static struct i2c_driver tps6105x_driver = { + .driver = { + .name = "tps6105x", + }, + .probe = tps6105x_probe, + .remove = __devexit_p(tps6105x_remove), + .id_table = tps6105x_id, +}; + +static int __init tps6105x_init(void) +{ + return i2c_add_driver(&tps6105x_driver); +} +subsys_initcall(tps6105x_init); + +static void __exit tps6105x_exit(void) +{ + i2c_del_driver(&tps6105x_driver); +} +module_exit(tps6105x_exit); + +MODULE_AUTHOR("Linus Walleij"); +MODULE_DESCRIPTION("TPS6105x White LED Boost Converter Driver"); +MODULE_LICENSE("GPL v2"); |