diff options
Diffstat (limited to 'drivers/mfd/twl4030-power.c')
| -rw-r--r-- | drivers/mfd/twl4030-power.c | 62 |
1 files changed, 50 insertions, 12 deletions
diff --git a/drivers/mfd/twl4030-power.c b/drivers/mfd/twl4030-power.c index a764676f092..79ca33dfacc 100644 --- a/drivers/mfd/twl4030-power.c +++ b/drivers/mfd/twl4030-power.c @@ -34,7 +34,8 @@ static u8 twl4030_start_script_address = 0x2b; #define PWR_P1_SW_EVENTS 0x10 -#define PWR_DEVOFF (1<<0) +#define PWR_DEVOFF (1 << 0) +#define SEQ_OFFSYNC (1 << 0) #define PHY_TO_OFF_PM_MASTER(p) (p - 0x36) #define PHY_TO_OFF_PM_RECEIVER(p) (p - 0x5b) @@ -123,7 +124,7 @@ static u8 res_config_addrs[] = { [RES_MAIN_REF] = 0x94, }; -static int __init twl4030_write_script_byte(u8 address, u8 byte) +static int __devinit twl4030_write_script_byte(u8 address, u8 byte) { int err; @@ -137,7 +138,7 @@ out: return err; } -static int __init twl4030_write_script_ins(u8 address, u16 pmb_message, +static int __devinit twl4030_write_script_ins(u8 address, u16 pmb_message, u8 delay, u8 next) { int err; @@ -157,7 +158,7 @@ out: return err; } -static int __init twl4030_write_script(u8 address, struct twl4030_ins *script, +static int __devinit twl4030_write_script(u8 address, struct twl4030_ins *script, int len) { int err; @@ -182,7 +183,7 @@ static int __init twl4030_write_script(u8 address, struct twl4030_ins *script, return err; } -static int __init twl4030_config_wakeup3_sequence(u8 address) +static int __devinit twl4030_config_wakeup3_sequence(u8 address) { int err; u8 data; @@ -207,7 +208,7 @@ out: return err; } -static int __init twl4030_config_wakeup12_sequence(u8 address) +static int __devinit twl4030_config_wakeup12_sequence(u8 address) { int err = 0; u8 data; @@ -261,7 +262,7 @@ out: return err; } -static int __init twl4030_config_sleep_sequence(u8 address) +static int __devinit twl4030_config_sleep_sequence(u8 address) { int err; @@ -275,7 +276,7 @@ static int __init twl4030_config_sleep_sequence(u8 address) return err; } -static int __init twl4030_config_warmreset_sequence(u8 address) +static int __devinit twl4030_config_warmreset_sequence(u8 address) { int err; u8 rd_data; @@ -323,7 +324,7 @@ out: return err; } -static int __init twl4030_configure_resource(struct twl4030_resconfig *rconfig) +static int __devinit twl4030_configure_resource(struct twl4030_resconfig *rconfig) { int rconfig_addr; int err; @@ -415,7 +416,7 @@ static int __init twl4030_configure_resource(struct twl4030_resconfig *rconfig) return 0; } -static int __init load_twl4030_script(struct twl4030_script *tscript, +static int __devinit load_twl4030_script(struct twl4030_script *tscript, u8 address) { int err; @@ -511,12 +512,27 @@ int twl4030_remove_script(u8 flags) return err; } -void __init twl4030_power_init(struct twl4030_power_data *twl4030_scripts) +/* + * In master mode, start the power off sequence. + * After a successful execution, TWL shuts down the power to the SoC + * and all peripherals connected to it. + */ +void twl4030_power_off(void) +{ + int err; + + err = twl_i2c_write_u8(TWL4030_MODULE_PM_MASTER, PWR_DEVOFF, + TWL4030_PM_MASTER_P1_SW_EVENTS); + if (err) + pr_err("TWL4030 Unable to power off\n"); +} + +void __devinit twl4030_power_init(struct twl4030_power_data *twl4030_scripts) { int err = 0; int i; struct twl4030_resconfig *resconfig; - u8 address = twl4030_start_script_address; + u8 val, address = twl4030_start_script_address; err = twl_i2c_write_u8(TWL4030_MODULE_PM_MASTER, TWL4030_PM_MASTER_KEY_CFG1, @@ -548,6 +564,28 @@ void __init twl4030_power_init(struct twl4030_power_data *twl4030_scripts) } } + /* Board has to be wired properly to use this feature */ + if (twl4030_scripts->use_poweroff && !pm_power_off) { + /* Default for SEQ_OFFSYNC is set, lets ensure this */ + err = twl_i2c_read_u8(TWL4030_MODULE_PM_MASTER, &val, + TWL4030_PM_MASTER_CFG_P123_TRANSITION); + if (err) { + pr_warning("TWL4030 Unable to read registers\n"); + + } else if (!(val & SEQ_OFFSYNC)) { + val |= SEQ_OFFSYNC; + err = twl_i2c_write_u8(TWL4030_MODULE_PM_MASTER, val, + TWL4030_PM_MASTER_CFG_P123_TRANSITION); + if (err) { + pr_err("TWL4030 Unable to setup SEQ_OFFSYNC\n"); + goto relock; + } + } + + pm_power_off = twl4030_power_off; + } + +relock: err = twl_i2c_write_u8(TWL4030_MODULE_PM_MASTER, 0, TWL4030_PM_MASTER_PROTECT_KEY); if (err) |