diff options
Diffstat (limited to 'drivers/mfd/wm831x-core.c')
| -rw-r--r-- | drivers/mfd/wm831x-core.c | 167 |
1 files changed, 1 insertions, 166 deletions
diff --git a/drivers/mfd/wm831x-core.c b/drivers/mfd/wm831x-core.c index 480abc18f9f..772fe584f3b 100644 --- a/drivers/mfd/wm831x-core.c +++ b/drivers/mfd/wm831x-core.c @@ -306,161 +306,6 @@ out: } EXPORT_SYMBOL_GPL(wm831x_set_bits); -/** - * wm831x_auxadc_read: Read a value from the WM831x AUXADC - * - * @wm831x: Device to read from. - * @input: AUXADC input to read. - */ -int wm831x_auxadc_read(struct wm831x *wm831x, enum wm831x_auxadc input) -{ - int ret, src, irq_masked, timeout; - - /* Are we using the interrupt? */ - irq_masked = wm831x_reg_read(wm831x, WM831X_INTERRUPT_STATUS_1_MASK); - irq_masked &= WM831X_AUXADC_DATA_EINT; - - mutex_lock(&wm831x->auxadc_lock); - - ret = wm831x_set_bits(wm831x, WM831X_AUXADC_CONTROL, - WM831X_AUX_ENA, WM831X_AUX_ENA); - if (ret < 0) { - dev_err(wm831x->dev, "Failed to enable AUXADC: %d\n", ret); - goto out; - } - - /* We force a single source at present */ - src = input; - ret = wm831x_reg_write(wm831x, WM831X_AUXADC_SOURCE, - 1 << src); - if (ret < 0) { - dev_err(wm831x->dev, "Failed to set AUXADC source: %d\n", ret); - goto out; - } - - /* Clear any notification from a very late arriving interrupt */ - try_wait_for_completion(&wm831x->auxadc_done); - - ret = wm831x_set_bits(wm831x, WM831X_AUXADC_CONTROL, - WM831X_AUX_CVT_ENA, WM831X_AUX_CVT_ENA); - if (ret < 0) { - dev_err(wm831x->dev, "Failed to start AUXADC: %d\n", ret); - goto disable; - } - - if (irq_masked) { - /* If we're not using interrupts then poll the - * interrupt status register */ - timeout = 5; - while (timeout) { - msleep(1); - - ret = wm831x_reg_read(wm831x, - WM831X_INTERRUPT_STATUS_1); - if (ret < 0) { - dev_err(wm831x->dev, - "ISR 1 read failed: %d\n", ret); - goto disable; - } - - /* Did it complete? */ - if (ret & WM831X_AUXADC_DATA_EINT) { - wm831x_reg_write(wm831x, - WM831X_INTERRUPT_STATUS_1, - WM831X_AUXADC_DATA_EINT); - break; - } else { - dev_err(wm831x->dev, - "AUXADC conversion timeout\n"); - ret = -EBUSY; - goto disable; - } - } - - ret = wm831x_reg_read(wm831x, WM831X_AUXADC_DATA); - if (ret < 0) { - dev_err(wm831x->dev, - "Failed to read AUXADC data: %d\n", ret); - goto disable; - } - - wm831x->auxadc_data = ret; - - } else { - /* If we are using interrupts then wait for the - * interrupt to complete. Use an extremely long - * timeout to handle situations with heavy load where - * the notification of the interrupt may be delayed by - * threaded IRQ handling. */ - if (!wait_for_completion_timeout(&wm831x->auxadc_done, - msecs_to_jiffies(500))) { - dev_err(wm831x->dev, "Timed out waiting for AUXADC\n"); - ret = -EBUSY; - goto disable; - } - } - - src = ((wm831x->auxadc_data & WM831X_AUX_DATA_SRC_MASK) - >> WM831X_AUX_DATA_SRC_SHIFT) - 1; - - if (src == 14) - src = WM831X_AUX_CAL; - - if (src != input) { - dev_err(wm831x->dev, "Data from source %d not %d\n", - src, input); - ret = -EINVAL; - } else { - ret = wm831x->auxadc_data & WM831X_AUX_DATA_MASK; - } - -disable: - wm831x_set_bits(wm831x, WM831X_AUXADC_CONTROL, WM831X_AUX_ENA, 0); -out: - mutex_unlock(&wm831x->auxadc_lock); - return ret; -} -EXPORT_SYMBOL_GPL(wm831x_auxadc_read); - -static irqreturn_t wm831x_auxadc_irq(int irq, void *irq_data) -{ - struct wm831x *wm831x = irq_data; - int ret; - - ret = wm831x_reg_read(wm831x, WM831X_AUXADC_DATA); - if (ret < 0) { - dev_err(wm831x->dev, - "Failed to read AUXADC data: %d\n", ret); - wm831x->auxadc_data = 0xffff; - } else { - wm831x->auxadc_data = ret; - } - - complete(&wm831x->auxadc_done); - - return IRQ_HANDLED; -} - -/** - * wm831x_auxadc_read_uv: Read a voltage from the WM831x AUXADC - * - * @wm831x: Device to read from. - * @input: AUXADC input to read. - */ -int wm831x_auxadc_read_uv(struct wm831x *wm831x, enum wm831x_auxadc input) -{ - int ret; - - ret = wm831x_auxadc_read(wm831x, input); - if (ret < 0) - return ret; - - ret *= 1465; - - return ret; -} -EXPORT_SYMBOL_GPL(wm831x_auxadc_read_uv); - static struct resource wm831x_dcdc1_resources[] = { { .start = WM831X_DC1_CONTROL_1, @@ -1447,8 +1292,6 @@ int wm831x_device_init(struct wm831x *wm831x, unsigned long id, int irq) mutex_init(&wm831x->io_lock); mutex_init(&wm831x->key_lock); - mutex_init(&wm831x->auxadc_lock); - init_completion(&wm831x->auxadc_done); dev_set_drvdata(wm831x->dev, wm831x); ret = wm831x_reg_read(wm831x, WM831X_PARENT_ID); @@ -1603,15 +1446,7 @@ int wm831x_device_init(struct wm831x *wm831x, unsigned long id, int irq) if (ret != 0) goto err; - if (wm831x->irq_base) { - ret = request_threaded_irq(wm831x->irq_base + - WM831X_IRQ_AUXADC_DATA, - NULL, wm831x_auxadc_irq, 0, - "auxadc", wm831x); - if (ret < 0) - dev_err(wm831x->dev, "AUXADC IRQ request failed: %d\n", - ret); - } + wm831x_auxadc_init(wm831x); /* The core device is up, instantiate the subdevices. */ switch (parent) { |