diff options
Diffstat (limited to 'drivers/mfd/wm8994-irq.c')
-rw-r--r-- | drivers/mfd/wm8994-irq.c | 310 |
1 files changed, 310 insertions, 0 deletions
diff --git a/drivers/mfd/wm8994-irq.c b/drivers/mfd/wm8994-irq.c new file mode 100644 index 00000000000..8400eb1ee5d --- /dev/null +++ b/drivers/mfd/wm8994-irq.c @@ -0,0 +1,310 @@ +/* + * wm8994-irq.c -- Interrupt controller support for Wolfson WM8994 + * + * Copyright 2010 Wolfson Microelectronics PLC. + * + * Author: Mark Brown <broonie@opensource.wolfsonmicro.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/i2c.h> +#include <linux/irq.h> +#include <linux/mfd/core.h> +#include <linux/interrupt.h> + +#include <linux/mfd/wm8994/core.h> +#include <linux/mfd/wm8994/registers.h> + +#include <linux/delay.h> + +struct wm8994_irq_data { + int reg; + int mask; +}; + +static struct wm8994_irq_data wm8994_irqs[] = { + [WM8994_IRQ_TEMP_SHUT] = { + .reg = 2, + .mask = WM8994_TEMP_SHUT_EINT, + }, + [WM8994_IRQ_MIC1_DET] = { + .reg = 2, + .mask = WM8994_MIC1_DET_EINT, + }, + [WM8994_IRQ_MIC1_SHRT] = { + .reg = 2, + .mask = WM8994_MIC1_SHRT_EINT, + }, + [WM8994_IRQ_MIC2_DET] = { + .reg = 2, + .mask = WM8994_MIC2_DET_EINT, + }, + [WM8994_IRQ_MIC2_SHRT] = { + .reg = 2, + .mask = WM8994_MIC2_SHRT_EINT, + }, + [WM8994_IRQ_FLL1_LOCK] = { + .reg = 2, + .mask = WM8994_FLL1_LOCK_EINT, + }, + [WM8994_IRQ_FLL2_LOCK] = { + .reg = 2, + .mask = WM8994_FLL2_LOCK_EINT, + }, + [WM8994_IRQ_SRC1_LOCK] = { + .reg = 2, + .mask = WM8994_SRC1_LOCK_EINT, + }, + [WM8994_IRQ_SRC2_LOCK] = { + .reg = 2, + .mask = WM8994_SRC2_LOCK_EINT, + }, + [WM8994_IRQ_AIF1DRC1_SIG_DET] = { + .reg = 2, + .mask = WM8994_AIF1DRC1_SIG_DET, + }, + [WM8994_IRQ_AIF1DRC2_SIG_DET] = { + .reg = 2, + .mask = WM8994_AIF1DRC2_SIG_DET_EINT, + }, + [WM8994_IRQ_AIF2DRC_SIG_DET] = { + .reg = 2, + .mask = WM8994_AIF2DRC_SIG_DET_EINT, + }, + [WM8994_IRQ_FIFOS_ERR] = { + .reg = 2, + .mask = WM8994_FIFOS_ERR_EINT, + }, + [WM8994_IRQ_WSEQ_DONE] = { + .reg = 2, + .mask = WM8994_WSEQ_DONE_EINT, + }, + [WM8994_IRQ_DCS_DONE] = { + .reg = 2, + .mask = WM8994_DCS_DONE_EINT, + }, + [WM8994_IRQ_TEMP_WARN] = { + .reg = 2, + .mask = WM8994_TEMP_WARN_EINT, + }, + [WM8994_IRQ_GPIO(1)] = { + .reg = 1, + .mask = WM8994_GP1_EINT, + }, + [WM8994_IRQ_GPIO(2)] = { + .reg = 1, + .mask = WM8994_GP2_EINT, + }, + [WM8994_IRQ_GPIO(3)] = { + .reg = 1, + .mask = WM8994_GP3_EINT, + }, + [WM8994_IRQ_GPIO(4)] = { + .reg = 1, + .mask = WM8994_GP4_EINT, + }, + [WM8994_IRQ_GPIO(5)] = { + .reg = 1, + .mask = WM8994_GP5_EINT, + }, + [WM8994_IRQ_GPIO(6)] = { + .reg = 1, + .mask = WM8994_GP6_EINT, + }, + [WM8994_IRQ_GPIO(7)] = { + .reg = 1, + .mask = WM8994_GP7_EINT, + }, + [WM8994_IRQ_GPIO(8)] = { + .reg = 1, + .mask = WM8994_GP8_EINT, + }, + [WM8994_IRQ_GPIO(9)] = { + .reg = 1, + .mask = WM8994_GP8_EINT, + }, + [WM8994_IRQ_GPIO(10)] = { + .reg = 1, + .mask = WM8994_GP10_EINT, + }, + [WM8994_IRQ_GPIO(11)] = { + .reg = 1, + .mask = WM8994_GP11_EINT, + }, +}; + +static inline int irq_data_to_status_reg(struct wm8994_irq_data *irq_data) +{ + return WM8994_INTERRUPT_STATUS_1 - 1 + irq_data->reg; +} + +static inline int irq_data_to_mask_reg(struct wm8994_irq_data *irq_data) +{ + return WM8994_INTERRUPT_STATUS_1_MASK - 1 + irq_data->reg; +} + +static inline struct wm8994_irq_data *irq_to_wm8994_irq(struct wm8994 *wm8994, + int irq) +{ + return &wm8994_irqs[irq - wm8994->irq_base]; +} + +static void wm8994_irq_lock(unsigned int irq) +{ + struct wm8994 *wm8994 = get_irq_chip_data(irq); + + mutex_lock(&wm8994->irq_lock); +} + +static void wm8994_irq_sync_unlock(unsigned int irq) +{ + struct wm8994 *wm8994 = get_irq_chip_data(irq); + int i; + + for (i = 0; i < ARRAY_SIZE(wm8994->irq_masks_cur); i++) { + /* If there's been a change in the mask write it back + * to the hardware. */ + if (wm8994->irq_masks_cur[i] != wm8994->irq_masks_cache[i]) { + wm8994->irq_masks_cache[i] = wm8994->irq_masks_cur[i]; + wm8994_reg_write(wm8994, + WM8994_INTERRUPT_STATUS_1_MASK + i, + wm8994->irq_masks_cur[i]); + } + } + + mutex_unlock(&wm8994->irq_lock); +} + +static void wm8994_irq_unmask(unsigned int irq) +{ + struct wm8994 *wm8994 = get_irq_chip_data(irq); + struct wm8994_irq_data *irq_data = irq_to_wm8994_irq(wm8994, irq); + + wm8994->irq_masks_cur[irq_data->reg - 1] &= ~irq_data->mask; +} + +static void wm8994_irq_mask(unsigned int irq) +{ + struct wm8994 *wm8994 = get_irq_chip_data(irq); + struct wm8994_irq_data *irq_data = irq_to_wm8994_irq(wm8994, irq); + + wm8994->irq_masks_cur[irq_data->reg - 1] |= irq_data->mask; +} + +static struct irq_chip wm8994_irq_chip = { + .name = "wm8994", + .bus_lock = wm8994_irq_lock, + .bus_sync_unlock = wm8994_irq_sync_unlock, + .mask = wm8994_irq_mask, + .unmask = wm8994_irq_unmask, +}; + +/* The processing of the primary interrupt occurs in a thread so that + * we can interact with the device over I2C or SPI. */ +static irqreturn_t wm8994_irq_thread(int irq, void *data) +{ + struct wm8994 *wm8994 = data; + unsigned int i; + u16 status[WM8994_NUM_IRQ_REGS]; + int ret; + + ret = wm8994_bulk_read(wm8994, WM8994_INTERRUPT_STATUS_1, + WM8994_NUM_IRQ_REGS, status); + if (ret < 0) { + dev_err(wm8994->dev, "Failed to read interrupt status: %d\n", + ret); + return IRQ_NONE; + } + + /* Apply masking */ + for (i = 0; i < WM8994_NUM_IRQ_REGS; i++) + status[i] &= ~wm8994->irq_masks_cur[i]; + + /* Report */ + for (i = 0; i < ARRAY_SIZE(wm8994_irqs); i++) { + if (status[wm8994_irqs[i].reg - 1] & wm8994_irqs[i].mask) + handle_nested_irq(wm8994->irq_base + i); + } + + /* Ack any unmasked IRQs */ + for (i = 0; i < ARRAY_SIZE(status); i++) { + if (status[i]) + wm8994_reg_write(wm8994, WM8994_INTERRUPT_STATUS_1 + i, + status[i]); + } + + return IRQ_HANDLED; +} + +int wm8994_irq_init(struct wm8994 *wm8994) +{ + int i, cur_irq, ret; + + mutex_init(&wm8994->irq_lock); + + /* Mask the individual interrupt sources */ + for (i = 0; i < ARRAY_SIZE(wm8994->irq_masks_cur); i++) { + wm8994->irq_masks_cur[i] = 0xffff; + wm8994->irq_masks_cache[i] = 0xffff; + wm8994_reg_write(wm8994, WM8994_INTERRUPT_STATUS_1_MASK + i, + 0xffff); + } + + if (!wm8994->irq) { + dev_warn(wm8994->dev, + "No interrupt specified, no interrupts\n"); + wm8994->irq_base = 0; + return 0; + } + + if (!wm8994->irq_base) { + dev_err(wm8994->dev, + "No interrupt base specified, no interrupts\n"); + return 0; + } + + /* Register them with genirq */ + for (cur_irq = wm8994->irq_base; + cur_irq < ARRAY_SIZE(wm8994_irqs) + wm8994->irq_base; + cur_irq++) { + set_irq_chip_data(cur_irq, wm8994); + set_irq_chip_and_handler(cur_irq, &wm8994_irq_chip, + handle_edge_irq); + set_irq_nested_thread(cur_irq, 1); + + /* ARM needs us to explicitly flag the IRQ as valid + * and will set them noprobe when we do so. */ +#ifdef CONFIG_ARM + set_irq_flags(cur_irq, IRQF_VALID); +#else + set_irq_noprobe(cur_irq); +#endif + } + + ret = request_threaded_irq(wm8994->irq, NULL, wm8994_irq_thread, + IRQF_TRIGGER_HIGH | IRQF_ONESHOT, + "wm8994", wm8994); + if (ret != 0) { + dev_err(wm8994->dev, "Failed to request IRQ %d: %d\n", + wm8994->irq, ret); + return ret; + } + + /* Enable top level interrupt if it was masked */ + wm8994_reg_write(wm8994, WM8994_INTERRUPT_CONTROL, 0); + + return 0; +} + +void wm8994_irq_exit(struct wm8994 *wm8994) +{ + if (wm8994->irq) + free_irq(wm8994->irq, wm8994); +} |