diff options
Diffstat (limited to 'drivers/mfd')
| -rw-r--r-- | drivers/mfd/Kconfig | 11 | ||||
| -rw-r--r-- | drivers/mfd/asic3.c | 4 | ||||
| -rw-r--r-- | drivers/mfd/db8500-prcmu.c | 1 | ||||
| -rw-r--r-- | drivers/mfd/omap-usb-host.c | 45 | ||||
| -rw-r--r-- | drivers/mfd/rc5t583.c | 39 | ||||
| -rw-r--r-- | drivers/mfd/twl6040-core.c | 114 |
6 files changed, 83 insertions, 131 deletions
diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig index 29f463cc09c..11e44386fa9 100644 --- a/drivers/mfd/Kconfig +++ b/drivers/mfd/Kconfig @@ -268,10 +268,17 @@ config TWL6030_PWM This is used to control charging LED brightness. config TWL6040_CORE - bool - depends on TWL4030_CORE && GENERIC_HARDIRQS + bool "Support for TWL6040 audio codec" + depends on I2C=y && GENERIC_HARDIRQS select MFD_CORE + select REGMAP_I2C default n + help + Say yes here if you want support for Texas Instruments TWL6040 audio + codec. + This driver provides common support for accessing the device, + additional drivers must be enabled in order to use the + functionality of the device (audio, vibra). config MFD_STMPE bool "Support STMicroelectronics STMPE" diff --git a/drivers/mfd/asic3.c b/drivers/mfd/asic3.c index 1895cf9fab8..1582c3d9525 100644 --- a/drivers/mfd/asic3.c +++ b/drivers/mfd/asic3.c @@ -527,7 +527,9 @@ static void asic3_gpio_set(struct gpio_chip *chip, static int asic3_gpio_to_irq(struct gpio_chip *chip, unsigned offset) { - return (offset < ASIC3_NUM_GPIOS) ? IRQ_BOARD_START + offset : -ENXIO; + struct asic3 *asic = container_of(chip, struct asic3, gpio); + + return (offset < ASIC3_NUM_GPIOS) ? asic->irq_base + offset : -ENXIO; } static __init int asic3_gpio_probe(struct platform_device *pdev, diff --git a/drivers/mfd/db8500-prcmu.c b/drivers/mfd/db8500-prcmu.c index ebc1e865822..5be32489714 100644 --- a/drivers/mfd/db8500-prcmu.c +++ b/drivers/mfd/db8500-prcmu.c @@ -2788,6 +2788,7 @@ static struct regulator_init_data db8500_regulators[DB8500_NUM_REGULATORS] = { .constraints = { .name = "db8500-vape", .valid_ops_mask = REGULATOR_CHANGE_STATUS, + .always_on = true, }, .consumer_supplies = db8500_vape_consumers, .num_consumer_supplies = ARRAY_SIZE(db8500_vape_consumers), diff --git a/drivers/mfd/omap-usb-host.c b/drivers/mfd/omap-usb-host.c index 95a2e546a48..7e96bb22972 100644 --- a/drivers/mfd/omap-usb-host.c +++ b/drivers/mfd/omap-usb-host.c @@ -25,7 +25,7 @@ #include <linux/clk.h> #include <linux/dma-mapping.h> #include <linux/spinlock.h> -#include <linux/gpio.h> +#include <plat/cpu.h> #include <plat/usb.h> #include <linux/pm_runtime.h> @@ -502,19 +502,6 @@ static void omap_usbhs_init(struct device *dev) pm_runtime_get_sync(dev); spin_lock_irqsave(&omap->lock, flags); - if (pdata->ehci_data->phy_reset) { - if (gpio_is_valid(pdata->ehci_data->reset_gpio_port[0])) - gpio_request_one(pdata->ehci_data->reset_gpio_port[0], - GPIOF_OUT_INIT_LOW, "USB1 PHY reset"); - - if (gpio_is_valid(pdata->ehci_data->reset_gpio_port[1])) - gpio_request_one(pdata->ehci_data->reset_gpio_port[1], - GPIOF_OUT_INIT_LOW, "USB2 PHY reset"); - - /* Hold the PHY in RESET for enough time till DIR is high */ - udelay(10); - } - omap->usbhs_rev = usbhs_read(omap->uhh_base, OMAP_UHH_REVISION); dev_dbg(dev, "OMAP UHH_REVISION 0x%x\n", omap->usbhs_rev); @@ -593,39 +580,10 @@ static void omap_usbhs_init(struct device *dev) usbhs_omap_tll_init(dev, OMAP_TLL_CHANNEL_COUNT); } - if (pdata->ehci_data->phy_reset) { - /* Hold the PHY in RESET for enough time till - * PHY is settled and ready - */ - udelay(10); - - if (gpio_is_valid(pdata->ehci_data->reset_gpio_port[0])) - gpio_set_value - (pdata->ehci_data->reset_gpio_port[0], 1); - - if (gpio_is_valid(pdata->ehci_data->reset_gpio_port[1])) - gpio_set_value - (pdata->ehci_data->reset_gpio_port[1], 1); - } - spin_unlock_irqrestore(&omap->lock, flags); pm_runtime_put_sync(dev); } -static void omap_usbhs_deinit(struct device *dev) -{ - struct usbhs_hcd_omap *omap = dev_get_drvdata(dev); - struct usbhs_omap_platform_data *pdata = &omap->platdata; - - if (pdata->ehci_data->phy_reset) { - if (gpio_is_valid(pdata->ehci_data->reset_gpio_port[0])) - gpio_free(pdata->ehci_data->reset_gpio_port[0]); - - if (gpio_is_valid(pdata->ehci_data->reset_gpio_port[1])) - gpio_free(pdata->ehci_data->reset_gpio_port[1]); - } -} - /** * usbhs_omap_probe - initialize TI-based HCDs @@ -860,7 +818,6 @@ static int __devexit usbhs_omap_remove(struct platform_device *pdev) { struct usbhs_hcd_omap *omap = platform_get_drvdata(pdev); - omap_usbhs_deinit(&pdev->dev); iounmap(omap->tll_base); iounmap(omap->uhh_base); clk_put(omap->init_60m_fclk); diff --git a/drivers/mfd/rc5t583.c b/drivers/mfd/rc5t583.c index 99ef944c621..44afae0a69c 100644 --- a/drivers/mfd/rc5t583.c +++ b/drivers/mfd/rc5t583.c @@ -80,44 +80,6 @@ static struct mfd_cell rc5t583_subdevs[] = { {.name = "rc5t583-key", } }; -int rc5t583_write(struct device *dev, uint8_t reg, uint8_t val) -{ - struct rc5t583 *rc5t583 = dev_get_drvdata(dev); - return regmap_write(rc5t583->regmap, reg, val); -} - -int rc5t583_read(struct device *dev, uint8_t reg, uint8_t *val) -{ - struct rc5t583 *rc5t583 = dev_get_drvdata(dev); - unsigned int ival; - int ret; - ret = regmap_read(rc5t583->regmap, reg, &ival); - if (!ret) - *val = (uint8_t)ival; - return ret; -} - -int rc5t583_set_bits(struct device *dev, unsigned int reg, - unsigned int bit_mask) -{ - struct rc5t583 *rc5t583 = dev_get_drvdata(dev); - return regmap_update_bits(rc5t583->regmap, reg, bit_mask, bit_mask); -} - -int rc5t583_clear_bits(struct device *dev, unsigned int reg, - unsigned int bit_mask) -{ - struct rc5t583 *rc5t583 = dev_get_drvdata(dev); - return regmap_update_bits(rc5t583->regmap, reg, bit_mask, 0); -} - -int rc5t583_update(struct device *dev, unsigned int reg, - unsigned int val, unsigned int mask) -{ - struct rc5t583 *rc5t583 = dev_get_drvdata(dev); - return regmap_update_bits(rc5t583->regmap, reg, mask, val); -} - static int __rc5t583_set_ext_pwrreq1_control(struct device *dev, int id, int ext_pwr, int slots) { @@ -197,6 +159,7 @@ int rc5t583_ext_power_req_config(struct device *dev, int ds_id, ds_id, ext_pwr_req); return 0; } +EXPORT_SYMBOL(rc5t583_ext_power_req_config); static int rc5t583_clear_ext_power_req(struct rc5t583 *rc5t583, struct rc5t583_platform_data *pdata) diff --git a/drivers/mfd/twl6040-core.c b/drivers/mfd/twl6040-core.c index b2d8e512d3c..2d6bedadca0 100644 --- a/drivers/mfd/twl6040-core.c +++ b/drivers/mfd/twl6040-core.c @@ -30,7 +30,9 @@ #include <linux/platform_device.h> #include <linux/gpio.h> #include <linux/delay.h> -#include <linux/i2c/twl.h> +#include <linux/i2c.h> +#include <linux/regmap.h> +#include <linux/err.h> #include <linux/mfd/core.h> #include <linux/mfd/twl6040.h> @@ -39,7 +41,7 @@ int twl6040_reg_read(struct twl6040 *twl6040, unsigned int reg) { int ret; - u8 val = 0; + unsigned int val; mutex_lock(&twl6040->io_mutex); /* Vibra control registers from cache */ @@ -47,7 +49,7 @@ int twl6040_reg_read(struct twl6040 *twl6040, unsigned int reg) reg == TWL6040_REG_VIBCTLR)) { val = twl6040->vibra_ctrl_cache[VIBRACTRL_MEMBER(reg)]; } else { - ret = twl_i2c_read_u8(TWL_MODULE_AUDIO_VOICE, &val, reg); + ret = regmap_read(twl6040->regmap, reg, &val); if (ret < 0) { mutex_unlock(&twl6040->io_mutex); return ret; @@ -64,7 +66,7 @@ int twl6040_reg_write(struct twl6040 *twl6040, unsigned int reg, u8 val) int ret; mutex_lock(&twl6040->io_mutex); - ret = twl_i2c_write_u8(TWL_MODULE_AUDIO_VOICE, val, reg); + ret = regmap_write(twl6040->regmap, reg, val); /* Cache the vibra control registers */ if (reg == TWL6040_REG_VIBCTLL || reg == TWL6040_REG_VIBCTLR) twl6040->vibra_ctrl_cache[VIBRACTRL_MEMBER(reg)] = val; @@ -77,16 +79,9 @@ EXPORT_SYMBOL(twl6040_reg_write); int twl6040_set_bits(struct twl6040 *twl6040, unsigned int reg, u8 mask) { int ret; - u8 val; mutex_lock(&twl6040->io_mutex); - ret = twl_i2c_read_u8(TWL_MODULE_AUDIO_VOICE, &val, reg); - if (ret) - goto out; - - val |= mask; - ret = twl_i2c_write_u8(TWL_MODULE_AUDIO_VOICE, val, reg); -out: + ret = regmap_update_bits(twl6040->regmap, reg, mask, mask); mutex_unlock(&twl6040->io_mutex); return ret; } @@ -95,16 +90,9 @@ EXPORT_SYMBOL(twl6040_set_bits); int twl6040_clear_bits(struct twl6040 *twl6040, unsigned int reg, u8 mask) { int ret; - u8 val; mutex_lock(&twl6040->io_mutex); - ret = twl_i2c_read_u8(TWL_MODULE_AUDIO_VOICE, &val, reg); - if (ret) - goto out; - - val &= ~mask; - ret = twl_i2c_write_u8(TWL_MODULE_AUDIO_VOICE, val, reg); -out: + ret = regmap_update_bits(twl6040->regmap, reg, mask, 0); mutex_unlock(&twl6040->io_mutex); return ret; } @@ -494,32 +482,58 @@ static struct resource twl6040_codec_rsrc[] = { }, }; -static int __devinit twl6040_probe(struct platform_device *pdev) +static bool twl6040_readable_reg(struct device *dev, unsigned int reg) { - struct twl4030_audio_data *pdata = pdev->dev.platform_data; + /* Register 0 is not readable */ + if (!reg) + return false; + return true; +} + +static struct regmap_config twl6040_regmap_config = { + .reg_bits = 8, + .val_bits = 8, + .max_register = TWL6040_REG_STATUS, /* 0x2e */ + + .readable_reg = twl6040_readable_reg, +}; + +static int __devinit twl6040_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct twl6040_platform_data *pdata = client->dev.platform_data; struct twl6040 *twl6040; struct mfd_cell *cell = NULL; int ret, children = 0; if (!pdata) { - dev_err(&pdev->dev, "Platform data is missing\n"); + dev_err(&client->dev, "Platform data is missing\n"); return -EINVAL; } /* In order to operate correctly we need valid interrupt config */ - if (!pdata->naudint_irq || !pdata->irq_base) { - dev_err(&pdev->dev, "Invalid IRQ configuration\n"); + if (!client->irq || !pdata->irq_base) { + dev_err(&client->dev, "Invalid IRQ configuration\n"); return -EINVAL; } - twl6040 = kzalloc(sizeof(struct twl6040), GFP_KERNEL); - if (!twl6040) - return -ENOMEM; + twl6040 = devm_kzalloc(&client->dev, sizeof(struct twl6040), + GFP_KERNEL); + if (!twl6040) { + ret = -ENOMEM; + goto err; + } + + twl6040->regmap = regmap_init_i2c(client, &twl6040_regmap_config); + if (IS_ERR(twl6040->regmap)) { + ret = PTR_ERR(twl6040->regmap); + goto err; + } - platform_set_drvdata(pdev, twl6040); + i2c_set_clientdata(client, twl6040); - twl6040->dev = &pdev->dev; - twl6040->irq = pdata->naudint_irq; + twl6040->dev = &client->dev; + twl6040->irq = client->irq; twl6040->irq_base = pdata->irq_base; mutex_init(&twl6040->mutex); @@ -588,12 +602,12 @@ static int __devinit twl6040_probe(struct platform_device *pdev) } if (children) { - ret = mfd_add_devices(&pdev->dev, pdev->id, twl6040->cells, + ret = mfd_add_devices(&client->dev, -1, twl6040->cells, children, NULL, 0); if (ret) goto mfd_err; } else { - dev_err(&pdev->dev, "No platform data found for children\n"); + dev_err(&client->dev, "No platform data found for children\n"); ret = -ENODEV; goto mfd_err; } @@ -608,14 +622,15 @@ gpio2_err: if (gpio_is_valid(twl6040->audpwron)) gpio_free(twl6040->audpwron); gpio1_err: - platform_set_drvdata(pdev, NULL); - kfree(twl6040); + i2c_set_clientdata(client, NULL); + regmap_exit(twl6040->regmap); +err: return ret; } -static int __devexit twl6040_remove(struct platform_device *pdev) +static int __devexit twl6040_remove(struct i2c_client *client) { - struct twl6040 *twl6040 = platform_get_drvdata(pdev); + struct twl6040 *twl6040 = i2c_get_clientdata(client); if (twl6040->power_count) twl6040_power(twl6040, 0); @@ -626,23 +641,30 @@ static int __devexit twl6040_remove(struct platform_device *pdev) free_irq(twl6040->irq_base + TWL6040_IRQ_READY, twl6040); twl6040_irq_exit(twl6040); - mfd_remove_devices(&pdev->dev); - platform_set_drvdata(pdev, NULL); - kfree(twl6040); + mfd_remove_devices(&client->dev); + i2c_set_clientdata(client, NULL); + regmap_exit(twl6040->regmap); return 0; } -static struct platform_driver twl6040_driver = { +static const struct i2c_device_id twl6040_i2c_id[] = { + { "twl6040", 0, }, + { }, +}; +MODULE_DEVICE_TABLE(i2c, twl6040_i2c_id); + +static struct i2c_driver twl6040_driver = { + .driver = { + .name = "twl6040", + .owner = THIS_MODULE, + }, .probe = twl6040_probe, .remove = __devexit_p(twl6040_remove), - .driver = { - .owner = THIS_MODULE, - .name = "twl6040", - }, + .id_table = twl6040_i2c_id, }; -module_platform_driver(twl6040_driver); +module_i2c_driver(twl6040_driver); MODULE_DESCRIPTION("TWL6040 MFD"); MODULE_AUTHOR("Misael Lopez Cruz <misael.lopez@ti.com>"); |