27 files changed, 4497 insertions, 499 deletions

diff --git a/drivers/mfd/88pm8607.c b/drivers/mfd/88pm8607.c
deleted file mode 100644
index 7e3f6590799..00000000000
--- a/drivers/mfd/88pm8607.c
+++ /dev/null
@@ -1,302 +0,0 @@
-/*
- * Base driver for Marvell 88PM8607
- *
- * Copyright (C) 2009 Marvell International Ltd.
- * 	Haojian Zhuang <haojian.zhuang@marvell.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/interrupt.h>
-#include <linux/platform_device.h>
-#include <linux/i2c.h>
-#include <linux/mfd/core.h>
-#include <linux/mfd/88pm8607.h>
-
-
-#define PM8607_REG_RESOURCE(_start, _end)		\
-{							\
-	.start	= PM8607_##_start,			\
-	.end	= PM8607_##_end,			\
-	.flags	= IORESOURCE_IO,			\
-}
-
-static struct resource pm8607_regulator_resources[] = {
-	PM8607_REG_RESOURCE(BUCK1, BUCK1),
-	PM8607_REG_RESOURCE(BUCK2, BUCK2),
-	PM8607_REG_RESOURCE(BUCK3, BUCK3),
-	PM8607_REG_RESOURCE(LDO1,  LDO1),
-	PM8607_REG_RESOURCE(LDO2,  LDO2),
-	PM8607_REG_RESOURCE(LDO3,  LDO3),
-	PM8607_REG_RESOURCE(LDO4,  LDO4),
-	PM8607_REG_RESOURCE(LDO5,  LDO5),
-	PM8607_REG_RESOURCE(LDO6,  LDO6),
-	PM8607_REG_RESOURCE(LDO7,  LDO7),
-	PM8607_REG_RESOURCE(LDO8,  LDO8),
-	PM8607_REG_RESOURCE(LDO9,  LDO9),
-	PM8607_REG_RESOURCE(LDO10, LDO10),
-	PM8607_REG_RESOURCE(LDO12, LDO12),
-	PM8607_REG_RESOURCE(LDO14, LDO14),
-};
-
-#define PM8607_REG_DEVS(_name, _id)					\
-{									\
-	.name		= "88pm8607-" #_name,				\
-	.num_resources	= 1,						\
-	.resources	= &pm8607_regulator_resources[PM8607_ID_##_id],	\
-}
-
-static struct mfd_cell pm8607_devs[] = {
-	PM8607_REG_DEVS(buck1, BUCK1),
-	PM8607_REG_DEVS(buck2, BUCK2),
-	PM8607_REG_DEVS(buck3, BUCK3),
-	PM8607_REG_DEVS(ldo1,  LDO1),
-	PM8607_REG_DEVS(ldo2,  LDO2),
-	PM8607_REG_DEVS(ldo3,  LDO3),
-	PM8607_REG_DEVS(ldo4,  LDO4),
-	PM8607_REG_DEVS(ldo5,  LDO5),
-	PM8607_REG_DEVS(ldo6,  LDO6),
-	PM8607_REG_DEVS(ldo7,  LDO7),
-	PM8607_REG_DEVS(ldo8,  LDO8),
-	PM8607_REG_DEVS(ldo9,  LDO9),
-	PM8607_REG_DEVS(ldo10, LDO10),
-	PM8607_REG_DEVS(ldo12, LDO12),
-	PM8607_REG_DEVS(ldo14, LDO14),
-};
-
-static inline int pm8607_read_device(struct pm8607_chip *chip,
-				     int reg, int bytes, void *dest)
-{
-	struct i2c_client *i2c = chip->client;
-	unsigned char data;
-	int ret;
-
-	data = (unsigned char)reg;
-	ret = i2c_master_send(i2c, &data, 1);
-	if (ret < 0)
-		return ret;
-
-	ret = i2c_master_recv(i2c, dest, bytes);
-	if (ret < 0)
-		return ret;
-	return 0;
-}
-
-static inline int pm8607_write_device(struct pm8607_chip *chip,
-				      int reg, int bytes, void *src)
-{
-	struct i2c_client *i2c = chip->client;
-	unsigned char buf[bytes + 1];
-	int ret;
-
-	buf[0] = (unsigned char)reg;
-	memcpy(&buf[1], src, bytes);
-
-	ret = i2c_master_send(i2c, buf, bytes + 1);
-	if (ret < 0)
-		return ret;
-	return 0;
-}
-
-int pm8607_reg_read(struct pm8607_chip *chip, int reg)
-{
-	unsigned char data;
-	int ret;
-
-	mutex_lock(&chip->io_lock);
-	ret = chip->read(chip, reg, 1, &data);
-	mutex_unlock(&chip->io_lock);
-
-	if (ret < 0)
-		return ret;
-	else
-		return (int)data;
-}
-EXPORT_SYMBOL(pm8607_reg_read);
-
-int pm8607_reg_write(struct pm8607_chip *chip, int reg,
-		     unsigned char data)
-{
-	int ret;
-
-	mutex_lock(&chip->io_lock);
-	ret = chip->write(chip, reg, 1, &data);
-	mutex_unlock(&chip->io_lock);
-
-	return ret;
-}
-EXPORT_SYMBOL(pm8607_reg_write);
-
-int pm8607_bulk_read(struct pm8607_chip *chip, int reg,
-		     int count, unsigned char *buf)
-{
-	int ret;
-
-	mutex_lock(&chip->io_lock);
-	ret = chip->read(chip, reg, count, buf);
-	mutex_unlock(&chip->io_lock);
-
-	return ret;
-}
-EXPORT_SYMBOL(pm8607_bulk_read);
-
-int pm8607_bulk_write(struct pm8607_chip *chip, int reg,
-		      int count, unsigned char *buf)
-{
-	int ret;
-
-	mutex_lock(&chip->io_lock);
-	ret = chip->write(chip, reg, count, buf);
-	mutex_unlock(&chip->io_lock);
-
-	return ret;
-}
-EXPORT_SYMBOL(pm8607_bulk_write);
-
-int pm8607_set_bits(struct pm8607_chip *chip, int reg,
-		    unsigned char mask, unsigned char data)
-{
-	unsigned char value;
-	int ret;
-
-	mutex_lock(&chip->io_lock);
-	ret = chip->read(chip, reg, 1, &value);
-	if (ret < 0)
-		goto out;
-	value &= ~mask;
-	value |= data;
-	ret = chip->write(chip, reg, 1, &value);
-out:
-	mutex_unlock(&chip->io_lock);
-	return ret;
-}
-EXPORT_SYMBOL(pm8607_set_bits);
-
-
-static const struct i2c_device_id pm8607_id_table[] = {
-	{ "88PM8607", 0 },
-	{}
-};
-MODULE_DEVICE_TABLE(i2c, pm8607_id_table);
-
-
-static int __devinit pm8607_probe(struct i2c_client *client,
-				  const struct i2c_device_id *id)
-{
-	struct pm8607_platform_data *pdata = client->dev.platform_data;
-	struct pm8607_chip *chip;
-	int i, count;
-	int ret;
-
-	chip = kzalloc(sizeof(struct pm8607_chip), GFP_KERNEL);
-	if (chip == NULL)
-		return -ENOMEM;
-
-	chip->client = client;
-	chip->dev = &client->dev;
-	chip->read = pm8607_read_device;
-	chip->write = pm8607_write_device;
-	i2c_set_clientdata(client, chip);
-
-	mutex_init(&chip->io_lock);
-	dev_set_drvdata(chip->dev, chip);
-
-	ret = pm8607_reg_read(chip, PM8607_CHIP_ID);
-	if (ret < 0) {
-		dev_err(chip->dev, "Failed to read CHIP ID: %d\n", ret);
-		goto out;
-	}
-	if ((ret & CHIP_ID_MASK) == CHIP_ID)
-		dev_info(chip->dev, "Marvell 88PM8607 (ID: %02x) detected\n",
-			 ret);
-	else {
-		dev_err(chip->dev, "Failed to detect Marvell 88PM8607. "
-			"Chip ID: %02x\n", ret);
-		goto out;
-	}
-	chip->chip_id = ret;
-
-	ret = pm8607_reg_read(chip, PM8607_BUCK3);
-	if (ret < 0) {
-		dev_err(chip->dev, "Failed to read BUCK3 register: %d\n", ret);
-		goto out;
-	}
-	if (ret & PM8607_BUCK3_DOUBLE)
-		chip->buck3_double = 1;
-
-	ret = pm8607_reg_read(chip, PM8607_MISC1);
-	if (ret < 0) {
-		dev_err(chip->dev, "Failed to read MISC1 register: %d\n", ret);
-		goto out;
-	}
-	if (pdata->i2c_port == PI2C_PORT)
-		ret |= PM8607_MISC1_PI2C;
-	else
-		ret &= ~PM8607_MISC1_PI2C;
-	ret = pm8607_reg_write(chip, PM8607_MISC1, ret);
-	if (ret < 0) {
-		dev_err(chip->dev, "Failed to write MISC1 register: %d\n", ret);
-		goto out;
-	}
-
-
-	count = ARRAY_SIZE(pm8607_devs);
-	for (i = 0; i < count; i++) {
-		ret = mfd_add_devices(chip->dev, i, &pm8607_devs[i],
-				      1, NULL, 0);
-		if (ret != 0) {
-			dev_err(chip->dev, "Failed to add subdevs\n");
-			goto out;
-		}
-	}
-
-	return 0;
-
-out:
-	i2c_set_clientdata(client, NULL);
-	kfree(chip);
-	return ret;
-}
-
-static int __devexit pm8607_remove(struct i2c_client *client)
-{
-	struct pm8607_chip *chip = i2c_get_clientdata(client);
-
-	mfd_remove_devices(chip->dev);
-	kfree(chip);
-	return 0;
-}
-
-static struct i2c_driver pm8607_driver = {
-	.driver	= {
-		.name	= "88PM8607",
-		.owner	= THIS_MODULE,
-	},
-	.probe		= pm8607_probe,
-	.remove		= __devexit_p(pm8607_remove),
-	.id_table	= pm8607_id_table,
-};
-
-static int __init pm8607_init(void)
-{
-	int ret;
-	ret = i2c_add_driver(&pm8607_driver);
-	if (ret != 0)
-		pr_err("Failed to register 88PM8607 I2C driver: %d\n", ret);
-	return ret;
-}
-subsys_initcall(pm8607_init);
-
-static void __exit pm8607_exit(void)
-{
-	i2c_del_driver(&pm8607_driver);
-}
-module_exit(pm8607_exit);
-
-MODULE_DESCRIPTION("PMIC Driver for Marvell 88PM8607");
-MODULE_AUTHOR("Haojian Zhuang <haojian.zhuang@marvell.com>");
-MODULE_LICENSE("GPL");
diff --git a/drivers/mfd/88pm860x-core.c b/drivers/mfd/88pm860x-core.c
new file mode 100644
index 00000000000..6a14d2b1ccf
--- /dev/null
+++ b/drivers/mfd/88pm860x-core.c
@@ -0,0 +1,740 @@
+/*
+ * Base driver for Marvell 88PM8607
+ *
+ * Copyright (C) 2009 Marvell International Ltd.
+ * 	Haojian Zhuang <haojian.zhuang@marvell.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/i2c.h>
+#include <linux/irq.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <linux/mfd/core.h>
+#include <linux/mfd/88pm860x.h>
+
+#define INT_STATUS_NUM			3
+
+char pm860x_backlight_name[][MFD_NAME_SIZE] = {
+	"backlight-0",
+	"backlight-1",
+	"backlight-2",
+};
+EXPORT_SYMBOL(pm860x_backlight_name);
+
+char pm860x_led_name[][MFD_NAME_SIZE] = {
+	"led0-red",
+	"led0-green",
+	"led0-blue",
+	"led1-red",
+	"led1-green",
+	"led1-blue",
+};
+EXPORT_SYMBOL(pm860x_led_name);
+
+#define PM8606_BACKLIGHT_RESOURCE(_i, _x)		\
+{							\
+	.name	= pm860x_backlight_name[_i],		\
+	.start	= PM8606_##_x,				\
+	.end	= PM8606_##_x,				\
+	.flags	= IORESOURCE_IO,			\
+}
+
+static struct resource backlight_resources[] = {
+	PM8606_BACKLIGHT_RESOURCE(PM8606_BACKLIGHT1, WLED1A),
+	PM8606_BACKLIGHT_RESOURCE(PM8606_BACKLIGHT2, WLED2A),
+	PM8606_BACKLIGHT_RESOURCE(PM8606_BACKLIGHT3, WLED3A),
+};
+
+#define PM8606_BACKLIGHT_DEVS(_i)			\
+{							\
+	.name		= "88pm860x-backlight",		\
+	.num_resources	= 1,				\
+	.resources	= &backlight_resources[_i],	\
+	.id		= _i,				\
+}
+
+static struct mfd_cell backlight_devs[] = {
+	PM8606_BACKLIGHT_DEVS(PM8606_BACKLIGHT1),
+	PM8606_BACKLIGHT_DEVS(PM8606_BACKLIGHT2),
+	PM8606_BACKLIGHT_DEVS(PM8606_BACKLIGHT3),
+};
+
+#define PM8606_LED_RESOURCE(_i, _x)			\
+{							\
+	.name	= pm860x_led_name[_i],			\
+	.start	= PM8606_##_x,				\
+	.end	= PM8606_##_x,				\
+	.flags	= IORESOURCE_IO,			\
+}
+
+static struct resource led_resources[] = {
+	PM8606_LED_RESOURCE(PM8606_LED1_RED, RGB2B),
+	PM8606_LED_RESOURCE(PM8606_LED1_GREEN, RGB2C),
+	PM8606_LED_RESOURCE(PM8606_LED1_BLUE, RGB2D),
+	PM8606_LED_RESOURCE(PM8606_LED2_RED, RGB1B),
+	PM8606_LED_RESOURCE(PM8606_LED2_GREEN, RGB1C),
+	PM8606_LED_RESOURCE(PM8606_LED2_BLUE, RGB1D),
+};
+
+#define PM8606_LED_DEVS(_i)				\
+{							\
+	.name		= "88pm860x-led",		\
+	.num_resources	= 1,				\
+	.resources	= &led_resources[_i],		\
+	.id		= _i,				\
+}
+
+static struct mfd_cell led_devs[] = {
+	PM8606_LED_DEVS(PM8606_LED1_RED),
+	PM8606_LED_DEVS(PM8606_LED1_GREEN),
+	PM8606_LED_DEVS(PM8606_LED1_BLUE),
+	PM8606_LED_DEVS(PM8606_LED2_RED),
+	PM8606_LED_DEVS(PM8606_LED2_GREEN),
+	PM8606_LED_DEVS(PM8606_LED2_BLUE),
+};
+
+static struct resource touch_resources[] = {
+	{
+		.start	= PM8607_IRQ_PEN,
+		.end	= PM8607_IRQ_PEN,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct mfd_cell touch_devs[] = {
+	{
+		.name		= "88pm860x-touch",
+		.num_resources	= 1,
+		.resources	= &touch_resources[0],
+	},
+};
+
+#define PM8607_REG_RESOURCE(_start, _end)		\
+{							\
+	.start	= PM8607_##_start,			\
+	.end	= PM8607_##_end,			\
+	.flags	= IORESOURCE_IO,			\
+}
+
+static struct resource power_supply_resources[] = {
+	{
+		.name		= "88pm860x-power",
+		.start		= PM8607_IRQ_CHG,
+		.end		= PM8607_IRQ_CHG,
+		.flags		= IORESOURCE_IRQ,
+	},
+};
+
+static struct mfd_cell power_devs[] = {
+	{
+		.name		= "88pm860x-power",
+		.num_resources	= 1,
+		.resources	= &power_supply_resources[0],
+		.id		= -1,
+	},
+};
+
+static struct resource onkey_resources[] = {
+	{
+		.name		= "88pm860x-onkey",
+		.start		= PM8607_IRQ_ONKEY,
+		.end		= PM8607_IRQ_ONKEY,
+		.flags		= IORESOURCE_IRQ,
+	},
+};
+
+static struct mfd_cell onkey_devs[] = {
+	{
+		.name		= "88pm860x-onkey",
+		.num_resources	= 1,
+		.resources	= &onkey_resources[0],
+		.id		= -1,
+	},
+};
+
+static struct resource regulator_resources[] = {
+	PM8607_REG_RESOURCE(BUCK1, BUCK1),
+	PM8607_REG_RESOURCE(BUCK2, BUCK2),
+	PM8607_REG_RESOURCE(BUCK3, BUCK3),
+	PM8607_REG_RESOURCE(LDO1,  LDO1),
+	PM8607_REG_RESOURCE(LDO2,  LDO2),
+	PM8607_REG_RESOURCE(LDO3,  LDO3),
+	PM8607_REG_RESOURCE(LDO4,  LDO4),
+	PM8607_REG_RESOURCE(LDO5,  LDO5),
+	PM8607_REG_RESOURCE(LDO6,  LDO6),
+	PM8607_REG_RESOURCE(LDO7,  LDO7),
+	PM8607_REG_RESOURCE(LDO8,  LDO8),
+	PM8607_REG_RESOURCE(LDO9,  LDO9),
+	PM8607_REG_RESOURCE(LDO10, LDO10),
+	PM8607_REG_RESOURCE(LDO12, LDO12),
+	PM8607_REG_RESOURCE(LDO14, LDO14),
+};
+
+#define PM8607_REG_DEVS(_name, _id)					\
+{									\
+	.name		= "88pm8607-" #_name,				\
+	.num_resources	= 1,						\
+	.resources	= &regulator_resources[PM8607_ID_##_id],	\
+	.id		= PM8607_ID_##_id,				\
+}
+
+static struct mfd_cell regulator_devs[] = {
+	PM8607_REG_DEVS(buck1, BUCK1),
+	PM8607_REG_DEVS(buck2, BUCK2),
+	PM8607_REG_DEVS(buck3, BUCK3),
+	PM8607_REG_DEVS(ldo1,  LDO1),
+	PM8607_REG_DEVS(ldo2,  LDO2),
+	PM8607_REG_DEVS(ldo3,  LDO3),
+	PM8607_REG_DEVS(ldo4,  LDO4),
+	PM8607_REG_DEVS(ldo5,  LDO5),
+	PM8607_REG_DEVS(ldo6,  LDO6),
+	PM8607_REG_DEVS(ldo7,  LDO7),
+	PM8607_REG_DEVS(ldo8,  LDO8),
+	PM8607_REG_DEVS(ldo9,  LDO9),
+	PM8607_REG_DEVS(ldo10, LDO10),
+	PM8607_REG_DEVS(ldo12, LDO12),
+	PM8607_REG_DEVS(ldo14, LDO14),
+};
+
+struct pm860x_irq_data {
+	int	reg;
+	int	mask_reg;
+	int	enable;		/* enable or not */
+	int	offs;		/* bit offset in mask register */
+};
+
+static struct pm860x_irq_data pm860x_irqs[] = {
+	[PM8607_IRQ_ONKEY] = {
+		.reg		= PM8607_INT_STATUS1,
+		.mask_reg	= PM8607_INT_MASK_1,
+		.offs		= 1 << 0,
+	},
+	[PM8607_IRQ_EXTON] = {
+		.reg		= PM8607_INT_STATUS1,
+		.mask_reg	= PM8607_INT_MASK_1,
+		.offs		= 1 << 1,
+	},
+	[PM8607_IRQ_CHG] = {
+		.reg		= PM8607_INT_STATUS1,
+		.mask_reg	= PM8607_INT_MASK_1,
+		.offs		= 1 << 2,
+	},
+	[PM8607_IRQ_BAT] = {
+		.reg		= PM8607_INT_STATUS1,
+		.mask_reg	= PM8607_INT_MASK_1,
+		.offs		= 1 << 3,
+	},
+	[PM8607_IRQ_RTC] = {
+		.reg		= PM8607_INT_STATUS1,
+		.mask_reg	= PM8607_INT_MASK_1,
+		.offs		= 1 << 4,
+	},
+	[PM8607_IRQ_CC] = {
+		.reg		= PM8607_INT_STATUS1,
+		.mask_reg	= PM8607_INT_MASK_1,
+		.offs		= 1 << 5,
+	},
+	[PM8607_IRQ_VBAT] = {
+		.reg		= PM8607_INT_STATUS2,
+		.mask_reg	= PM8607_INT_MASK_2,
+		.offs		= 1 << 0,
+	},
+	[PM8607_IRQ_VCHG] = {
+		.reg		= PM8607_INT_STATUS2,
+		.mask_reg	= PM8607_INT_MASK_2,
+		.offs		= 1 << 1,
+	},
+	[PM8607_IRQ_VSYS] = {
+		.reg		= PM8607_INT_STATUS2,
+		.mask_reg	= PM8607_INT_MASK_2,
+		.offs		= 1 << 2,
+	},
+	[PM8607_IRQ_TINT] = {
+		.reg		= PM8607_INT_STATUS2,
+		.mask_reg	= PM8607_INT_MASK_2,
+		.offs		= 1 << 3,
+	},
+	[PM8607_IRQ_GPADC0] = {
+		.reg		= PM8607_INT_STATUS2,
+		.mask_reg	= PM8607_INT_MASK_2,
+		.offs		= 1 << 4,
+	},
+	[PM8607_IRQ_GPADC1] = {
+		.reg		= PM8607_INT_STATUS2,
+		.mask_reg	= PM8607_INT_MASK_2,
+		.offs		= 1 << 5,
+	},
+	[PM8607_IRQ_GPADC2] = {
+		.reg		= PM8607_INT_STATUS2,
+		.mask_reg	= PM8607_INT_MASK_2,
+		.offs		= 1 << 6,
+	},
+	[PM8607_IRQ_GPADC3] = {
+		.reg		= PM8607_INT_STATUS2,
+		.mask_reg	= PM8607_INT_MASK_2,
+		.offs		= 1 << 7,
+	},
+	[PM8607_IRQ_AUDIO_SHORT] = {
+		.reg		= PM8607_INT_STATUS3,
+		.mask_reg	= PM8607_INT_MASK_3,
+		.offs		= 1 << 0,
+	},
+	[PM8607_IRQ_PEN] = {
+		.reg		= PM8607_INT_STATUS3,
+		.mask_reg	= PM8607_INT_MASK_3,
+		.offs		= 1 << 1,
+	},
+	[PM8607_IRQ_HEADSET] = {
+		.reg		= PM8607_INT_STATUS3,
+		.mask_reg	= PM8607_INT_MASK_3,
+		.offs		= 1 << 2,
+	},
+	[PM8607_IRQ_HOOK] = {
+		.reg		= PM8607_INT_STATUS3,
+		.mask_reg	= PM8607_INT_MASK_3,
+		.offs		= 1 << 3,
+	},
+	[PM8607_IRQ_MICIN] = {
+		.reg		= PM8607_INT_STATUS3,
+		.mask_reg	= PM8607_INT_MASK_3,
+		.offs		= 1 << 4,
+	},
+	[PM8607_IRQ_CHG_FAIL] = {
+		.reg		= PM8607_INT_STATUS3,
+		.mask_reg	= PM8607_INT_MASK_3,
+		.offs		= 1 << 5,
+	},
+	[PM8607_IRQ_CHG_DONE] = {
+		.reg		= PM8607_INT_STATUS3,
+		.mask_reg	= PM8607_INT_MASK_3,
+		.offs		= 1 << 6,
+	},
+	[PM8607_IRQ_CHG_FAULT] = {
+		.reg		= PM8607_INT_STATUS3,
+		.mask_reg	= PM8607_INT_MASK_3,
+		.offs		= 1 << 7,
+	},
+};
+
+static inline struct pm860x_irq_data *irq_to_pm860x(struct pm860x_chip *chip,
+						    int irq)
+{
+	return &pm860x_irqs[irq - chip->irq_base];
+}
+
+static irqreturn_t pm860x_irq(int irq, void *data)
+{
+	struct pm860x_chip *chip = data;
+	struct pm860x_irq_data *irq_data;
+	struct i2c_client *i2c;
+	int read_reg = -1, value = 0;
+	int i;
+
+	i2c = (chip->id == CHIP_PM8607) ? chip->client : chip->companion;
+	for (i = 0; i < ARRAY_SIZE(pm860x_irqs); i++) {
+		irq_data = &pm860x_irqs[i];
+		if (read_reg != irq_data->reg) {
+			read_reg = irq_data->reg;
+			value = pm860x_reg_read(i2c, irq_data->reg);
+		}
+		if (value & irq_data->enable)
+			handle_nested_irq(chip->irq_base + i);
+	}
+	return IRQ_HANDLED;
+}
+
+static void pm860x_irq_lock(unsigned int irq)
+{
+	struct pm860x_chip *chip = get_irq_chip_data(irq);
+
+	mutex_lock(&chip->irq_lock);
+}
+
+static void pm860x_irq_sync_unlock(unsigned int irq)
+{
+	struct pm860x_chip *chip = get_irq_chip_data(irq);
+	struct pm860x_irq_data *irq_data;
+	struct i2c_client *i2c;
+	static unsigned char cached[3] = {0x0, 0x0, 0x0};
+	unsigned char mask[3];
+	int i;
+
+	i2c = (chip->id == CHIP_PM8607) ? chip->client : chip->companion;
+	/* Load cached value. In initial, all IRQs are masked */
+	for (i = 0; i < 3; i++)
+		mask[i] = cached[i];
+	for (i = 0; i < ARRAY_SIZE(pm860x_irqs); i++) {
+		irq_data = &pm860x_irqs[i];
+		switch (irq_data->mask_reg) {
+		case PM8607_INT_MASK_1:
+			mask[0] &= ~irq_data->offs;
+			mask[0] |= irq_data->enable;
+			break;
+		case PM8607_INT_MASK_2:
+			mask[1] &= ~irq_data->offs;
+			mask[1] |= irq_data->enable;
+			break;
+		case PM8607_INT_MASK_3:
+			mask[2] &= ~irq_data->offs;
+			mask[2] |= irq_data->enable;
+			break;
+		default:
+			dev_err(chip->dev, "wrong IRQ\n");
+			break;
+		}
+	}
+	/* update mask into registers */
+	for (i = 0; i < 3; i++) {
+		if (mask[i] != cached[i]) {
+			cached[i] = mask[i];
+			pm860x_reg_write(i2c, PM8607_INT_MASK_1 + i, mask[i]);
+		}
+	}
+
+	mutex_unlock(&chip->irq_lock);
+}
+
+static void pm860x_irq_enable(unsigned int irq)
+{
+	struct pm860x_chip *chip = get_irq_chip_data(irq);
+	pm860x_irqs[irq - chip->irq_base].enable
+		= pm860x_irqs[irq - chip->irq_base].offs;
+}
+
+static void pm860x_irq_disable(unsigned int irq)
+{
+	struct pm860x_chip *chip = get_irq_chip_data(irq);
+	pm860x_irqs[irq - chip->irq_base].enable = 0;
+}
+
+static struct irq_chip pm860x_irq_chip = {
+	.name		= "88pm860x",
+	.bus_lock	= pm860x_irq_lock,
+	.bus_sync_unlock = pm860x_irq_sync_unlock,
+	.enable		= pm860x_irq_enable,
+	.disable	= pm860x_irq_disable,
+};
+
+static int __devinit device_gpadc_init(struct pm860x_chip *chip,
+				       struct pm860x_platform_data *pdata)
+{
+	struct i2c_client *i2c = (chip->id == CHIP_PM8607) ? chip->client \
+				: chip->companion;
+	int use_gpadc = 0, data, ret;
+
+	/* initialize GPADC without activating it */
+
+	if (pdata && pdata->touch) {
+		/* set GPADC MISC1 register */
+		data = 0;
+		data |= (pdata->touch->gpadc_prebias << 1)
+			& PM8607_GPADC_PREBIAS_MASK;
+		data |= (pdata->touch->slot_cycle << 3)
+			& PM8607_GPADC_SLOT_CYCLE_MASK;
+		data |= (pdata->touch->off_scale << 5)
+			& PM8607_GPADC_OFF_SCALE_MASK;
+		data |= (pdata->touch->sw_cal << 7)
+			& PM8607_GPADC_SW_CAL_MASK;
+		if (data) {
+			ret = pm860x_reg_write(i2c, PM8607_GPADC_MISC1, data);
+			if (ret < 0)
+				goto out;
+		}
+		/* set tsi prebias time */
+		if (pdata->touch->tsi_prebias) {
+			data = pdata->touch->tsi_prebias;
+			ret = pm860x_reg_write(i2c, PM8607_TSI_PREBIAS, data);
+			if (ret < 0)
+				goto out;
+		}
+		/* set prebias & prechg time of pen detect */
+		data = 0;
+		data |= pdata->touch->pen_prebias & PM8607_PD_PREBIAS_MASK;
+		data |= (pdata->touch->pen_prechg << 5)
+			& PM8607_PD_PRECHG_MASK;
+		if (data) {
+			ret = pm860x_reg_write(i2c, PM8607_PD_PREBIAS, data);
+			if (ret < 0)
+				goto out;
+		}
+
+		use_gpadc = 1;
+	}
+
+	/* turn on GPADC */
+	if (use_gpadc) {
+		ret = pm860x_set_bits(i2c, PM8607_GPADC_MISC1,
+				      PM8607_GPADC_EN, PM8607_GPADC_EN);
+	}
+out:
+	return ret;
+}
+
+static int __devinit device_irq_init(struct pm860x_chip *chip,
+				     struct pm860x_platform_data *pdata)
+{
+	struct i2c_client *i2c = (chip->id == CHIP_PM8607) ? chip->client \
+				: chip->companion;
+	unsigned char status_buf[INT_STATUS_NUM];
+	unsigned long flags = IRQF_TRIGGER_FALLING | IRQF_ONESHOT;
+	struct irq_desc *desc;
+	int i, data, mask, ret = -EINVAL;
+	int __irq;
+
+	if (!pdata || !pdata->irq_base) {
+		dev_warn(chip->dev, "No interrupt support on IRQ base\n");
+		return -EINVAL;
+	}
+
+	mask = PM8607_B0_MISC1_INV_INT | PM8607_B0_MISC1_INT_CLEAR
+		| PM8607_B0_MISC1_INT_MASK;
+	data = 0;
+	chip->irq_mode = 0;
+	if (pdata && pdata->irq_mode) {
+		/*
+		 * irq_mode defines the way of clearing interrupt. If it's 1,
+		 * clear IRQ by write. Otherwise, clear it by read.
+		 * This control bit is valid from 88PM8607 B0 steping.
+		 */
+		data |= PM8607_B0_MISC1_INT_CLEAR;
+		chip->irq_mode = 1;
+	}
+	ret = pm860x_set_bits(i2c, PM8607_B0_MISC1, mask, data);
+	if (ret < 0)
+		goto out;
+
+	/* mask all IRQs */
+	memset(status_buf, 0, INT_STATUS_NUM);
+	ret = pm860x_bulk_write(i2c, PM8607_INT_MASK_1,
+				INT_STATUS_NUM, status_buf);
+	if (ret < 0)
+		goto out;
+
+	if (chip->irq_mode) {
+		/* clear interrupt status by write */
+		memset(status_buf, 0xFF, INT_STATUS_NUM);
+		ret = pm860x_bulk_write(i2c, PM8607_INT_STATUS1,
+					INT_STATUS_NUM, status_buf);
+	} else {
+		/* clear interrupt status by read */
+		ret = pm860x_bulk_read(i2c, PM8607_INT_STATUS1,
+					INT_STATUS_NUM, status_buf);
+	}
+	if (ret < 0)
+		goto out;
+
+	mutex_init(&chip->irq_lock);
+	chip->irq_base = pdata->irq_base;
+	chip->core_irq = i2c->irq;
+	if (!chip->core_irq)
+		goto out;
+
+	desc = irq_to_desc(chip->core_irq);
+
+	/* register IRQ by genirq */
+	for (i = 0; i < ARRAY_SIZE(pm860x_irqs); i++) {
+		__irq = i + chip->irq_base;
+		set_irq_chip_data(__irq, chip);
+		set_irq_chip_and_handler(__irq, &pm860x_irq_chip,
+					 handle_edge_irq);
+		set_irq_nested_thread(__irq, 1);
+#ifdef CONFIG_ARM
+		set_irq_flags(__irq, IRQF_VALID);
+#else
+		set_irq_noprobe(__irq);
+#endif
+	}
+
+	ret = request_threaded_irq(chip->core_irq, NULL, pm860x_irq, flags,
+				   "88pm860x", chip);
+	if (ret) {
+		dev_err(chip->dev, "Failed to request IRQ: %d\n", ret);
+		chip->core_irq = 0;
+	}
+
+	return 0;
+out:
+	chip->core_irq = 0;
+	return ret;
+}
+
+static void __devexit device_irq_exit(struct pm860x_chip *chip)
+{
+	if (chip->core_irq)
+		free_irq(chip->core_irq, chip);
+}
+
+static void __devinit device_8606_init(struct pm860x_chip *chip,
+				       struct i2c_client *i2c,
+				       struct pm860x_platform_data *pdata)
+{
+	int ret;
+
+	if (pdata && pdata->backlight) {
+		ret = mfd_add_devices(chip->dev, 0, &backlight_devs[0],
+				      ARRAY_SIZE(backlight_devs),
+				      &backlight_resources[0], 0);
+		if (ret < 0) {
+			dev_err(chip->dev, "Failed to add backlight "
+				"subdev\n");
+			goto out_dev;
+		}
+	}
+
+	if (pdata && pdata->led) {
+		ret = mfd_add_devices(chip->dev, 0, &led_devs[0],
+				      ARRAY_SIZE(led_devs),
+				      &led_resources[0], 0);
+		if (ret < 0) {
+			dev_err(chip->dev, "Failed to add led "
+				"subdev\n");
+			goto out_dev;
+		}
+	}
+	return;
+out_dev:
+	mfd_remove_devices(chip->dev);
+	device_irq_exit(chip);
+}
+
+static void __devinit device_8607_init(struct pm860x_chip *chip,
+				       struct i2c_client *i2c,
+				       struct pm860x_platform_data *pdata)
+{
+	int data, ret;
+
+	ret = pm860x_reg_read(i2c, PM8607_CHIP_ID);
+	if (ret < 0) {
+		dev_err(chip->dev, "Failed to read CHIP ID: %d\n", ret);
+		goto out;
+	}
+	if ((ret & PM8607_VERSION_MASK) == PM8607_VERSION)
+		dev_info(chip->dev, "Marvell 88PM8607 (ID: %02x) detected\n",
+			 ret);
+	else {
+		dev_err(chip->dev, "Failed to detect Marvell 88PM8607. "
+			"Chip ID: %02x\n", ret);
+		goto out;
+	}
+
+	ret = pm860x_reg_read(i2c, PM8607_BUCK3);
+	if (ret < 0) {
+		dev_err(chip->dev, "Failed to read BUCK3 register: %d\n", ret);
+		goto out;
+	}
+	if (ret & PM8607_BUCK3_DOUBLE)
+		chip->buck3_double = 1;
+
+	ret = pm860x_reg_read(i2c, PM8607_B0_MISC1);
+	if (ret < 0) {
+		dev_err(chip->dev, "Failed to read MISC1 register: %d\n", ret);
+		goto out;
+	}
+
+	if (pdata && (pdata->i2c_port == PI2C_PORT))
+		data = PM8607_B0_MISC1_PI2C;
+	else
+		data = 0;
+	ret = pm860x_set_bits(i2c, PM8607_B0_MISC1, PM8607_B0_MISC1_PI2C, data);
+	if (ret < 0) {
+		dev_err(chip->dev, "Failed to access MISC1:%d\n", ret);
+		goto out;
+	}
+
+	ret = device_gpadc_init(chip, pdata);
+	if (ret < 0)
+		goto out;
+
+	ret = device_irq_init(chip, pdata);
+	if (ret < 0)
+		goto out;
+
+	ret = mfd_add_devices(chip->dev, 0, &regulator_devs[0],
+			      ARRAY_SIZE(regulator_devs),
+			      &regulator_resources[0], 0);
+	if (ret < 0) {
+		dev_err(chip->dev, "Failed to add regulator subdev\n");
+		goto out_dev;
+	}
+
+	if (pdata && pdata->touch) {
+		ret = mfd_add_devices(chip->dev, 0, &touch_devs[0],
+				      ARRAY_SIZE(touch_devs),
+				      &touch_resources[0], 0);
+		if (ret < 0) {
+			dev_err(chip->dev, "Failed to add touch "
+				"subdev\n");
+			goto out_dev;
+		}
+	}
+
+	if (pdata && pdata->power) {
+		ret = mfd_add_devices(chip->dev, 0, &power_devs[0],
+				      ARRAY_SIZE(power_devs),
+				      &power_supply_resources[0], 0);
+		if (ret < 0) {
+			dev_err(chip->dev, "Failed to add power supply "
+				"subdev\n");
+			goto out_dev;
+		}
+	}
+
+	ret = mfd_add_devices(chip->dev, 0, &onkey_devs[0],
+			      ARRAY_SIZE(onkey_devs),
+			      &onkey_resources[0], 0);
+	if (ret < 0) {
+		dev_err(chip->dev, "Failed to add onkey subdev\n");
+		goto out_dev;
+	}
+
+	return;
+out_dev:
+	mfd_remove_devices(chip->dev);
+	device_irq_exit(chip);
+out:
+	return;
+}
+
+int pm860x_device_init(struct pm860x_chip *chip,
+		       struct pm860x_platform_data *pdata)
+{
+	chip->core_irq = 0;
+
+	switch (chip->id) {
+	case CHIP_PM8606:
+		device_8606_init(chip, chip->client, pdata);
+		break;
+	case CHIP_PM8607:
+		device_8607_init(chip, chip->client, pdata);
+		break;
+	}
+
+	if (chip->companion) {
+		switch (chip->id) {
+		case CHIP_PM8607:
+			device_8606_init(chip, chip->companion, pdata);
+			break;
+		case CHIP_PM8606:
+			device_8607_init(chip, chip->companion, pdata);
+			break;
+		}
+	}
+
+	return 0;
+}
+
+void pm860x_device_exit(struct pm860x_chip *chip)
+{
+	device_irq_exit(chip);
+	mfd_remove_devices(chip->dev);
+}
+
+MODULE_DESCRIPTION("PMIC Driver for Marvell 88PM860x");
+MODULE_AUTHOR("Haojian Zhuang <haojian.zhuang@marvell.com>");
+MODULE_LICENSE("GPL");
diff --git a/drivers/mfd/88pm860x-i2c.c b/drivers/mfd/88pm860x-i2c.c
new file mode 100644
index 00000000000..c37e12bf300
--- /dev/null
+++ b/drivers/mfd/88pm860x-i2c.c
@@ -0,0 +1,236 @@
+/*
+ * I2C driver for Marvell 88PM860x
+ *
+ * Copyright (C) 2009 Marvell International Ltd.
+ * 	Haojian Zhuang <haojian.zhuang@marvell.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/i2c.h>
+#include <linux/mfd/88pm860x.h>
+
+static inline int pm860x_read_device(struct i2c_client *i2c,
+				     int reg, int bytes, void *dest)
+{
+	unsigned char data;
+	int ret;
+
+	data = (unsigned char)reg;
+	ret = i2c_master_send(i2c, &data, 1);
+	if (ret < 0)
+		return ret;
+
+	ret = i2c_master_recv(i2c, dest, bytes);
+	if (ret < 0)
+		return ret;
+	return 0;
+}
+
+static inline int pm860x_write_device(struct i2c_client *i2c,
+				      int reg, int bytes, void *src)
+{
+	unsigned char buf[bytes + 1];
+	int ret;
+
+	buf[0] = (unsigned char)reg;
+	memcpy(&buf[1], src, bytes);
+
+	ret = i2c_master_send(i2c, buf, bytes + 1);
+	if (ret < 0)
+		return ret;
+	return 0;
+}
+
+int pm860x_reg_read(struct i2c_client *i2c, int reg)
+{
+	struct pm860x_chip *chip = i2c_get_clientdata(i2c);
+	unsigned char data;
+	int ret;
+
+	mutex_lock(&chip->io_lock);
+	ret = pm860x_read_device(i2c, reg, 1, &data);
+	mutex_unlock(&chip->io_lock);
+
+	if (ret < 0)
+		return ret;
+	else
+		return (int)data;
+}
+EXPORT_SYMBOL(pm860x_reg_read);
+
+int pm860x_reg_write(struct i2c_client *i2c, int reg,
+		     unsigned char data)
+{
+	struct pm860x_chip *chip = i2c_get_clientdata(i2c);
+	int ret;
+
+	mutex_lock(&chip->io_lock);
+	ret = pm860x_write_device(i2c, reg, 1, &data);
+	mutex_unlock(&chip->io_lock);
+
+	return ret;
+}
+EXPORT_SYMBOL(pm860x_reg_write);
+
+int pm860x_bulk_read(struct i2c_client *i2c, int reg,
+		     int count, unsigned char *buf)
+{
+	struct pm860x_chip *chip = i2c_get_clientdata(i2c);
+	int ret;
+
+	mutex_lock(&chip->io_lock);
+	ret = pm860x_read_device(i2c, reg, count, buf);
+	mutex_unlock(&chip->io_lock);
+
+	return ret;
+}
+EXPORT_SYMBOL(pm860x_bulk_read);
+
+int pm860x_bulk_write(struct i2c_client *i2c, int reg,
+		      int count, unsigned char *buf)
+{
+	struct pm860x_chip *chip = i2c_get_clientdata(i2c);
+	int ret;
+
+	mutex_lock(&chip->io_lock);
+	ret = pm860x_write_device(i2c, reg, count, buf);
+	mutex_unlock(&chip->io_lock);
+
+	return ret;
+}
+EXPORT_SYMBOL(pm860x_bulk_write);
+
+int pm860x_set_bits(struct i2c_client *i2c, int reg,
+		    unsigned char mask, unsigned char data)
+{
+	struct pm860x_chip *chip = i2c_get_clientdata(i2c);
+	unsigned char value;
+	int ret;
+
+	mutex_lock(&chip->io_lock);
+	ret = pm860x_read_device(i2c, reg, 1, &value);
+	if (ret < 0)
+		goto out;
+	value &= ~mask;
+	value |= data;
+	ret = pm860x_write_device(i2c, reg, 1, &value);
+out:
+	mutex_unlock(&chip->io_lock);
+	return ret;
+}
+EXPORT_SYMBOL(pm860x_set_bits);
+
+
+static const struct i2c_device_id pm860x_id_table[] = {
+	{ "88PM860x", 0 },
+	{}
+};
+MODULE_DEVICE_TABLE(i2c, pm860x_id_table);
+
+static int verify_addr(struct i2c_client *i2c)
+{
+	unsigned short addr_8607[] = {0x30, 0x34};
+	unsigned short addr_8606[] = {0x10, 0x11};
+	int size, i;
+
+	if (i2c == NULL)
+		return 0;
+	size = ARRAY_SIZE(addr_8606);
+	for (i = 0; i < size; i++) {
+		if (i2c->addr == *(addr_8606 + i))
+			return CHIP_PM8606;
+	}
+	size = ARRAY_SIZE(addr_8607);
+	for (i = 0; i < size; i++) {
+		if (i2c->addr == *(addr_8607 + i))
+			return CHIP_PM8607;
+	}
+	return 0;
+}
+
+static int __devinit pm860x_probe(struct i2c_client *client,
+				  const struct i2c_device_id *id)
+{
+	struct pm860x_platform_data *pdata = client->dev.platform_data;
+	struct pm860x_chip *chip;
+
+	if (!pdata) {
+		pr_info("No platform data in %s!\n", __func__);
+		return -EINVAL;
+	}
+
+	chip = kzalloc(sizeof(struct pm860x_chip), GFP_KERNEL);
+	if (chip == NULL)
+		return -ENOMEM;
+
+	chip->id = verify_addr(client);
+	chip->client = client;
+	i2c_set_clientdata(client, chip);
+	chip->dev = &client->dev;
+	mutex_init(&chip->io_lock);
+	dev_set_drvdata(chip->dev, chip);
+
+	/*
+	 * Both client and companion client shares same platform driver.
+	 * Driver distinguishes them by pdata->companion_addr.
+	 * pdata->companion_addr is only assigned if companion chip exists.
+	 * At the same time, the companion_addr shouldn't equal to client
+	 * address.
+	 */
+	if (pdata->companion_addr && (pdata->companion_addr != client->addr)) {
+		chip->companion_addr = pdata->companion_addr;
+		chip->companion = i2c_new_dummy(chip->client->adapter,
+						chip->companion_addr);
+		i2c_set_clientdata(chip->companion, chip);
+	}
+
+	pm860x_device_init(chip, pdata);
+	return 0;
+}
+
+static int __devexit pm860x_remove(struct i2c_client *client)
+{
+	struct pm860x_chip *chip = i2c_get_clientdata(client);
+
+	pm860x_device_exit(chip);
+	i2c_unregister_device(chip->companion);
+	i2c_set_clientdata(chip->companion, NULL);
+	i2c_set_clientdata(chip->client, NULL);
+	kfree(chip);
+	return 0;
+}
+
+static struct i2c_driver pm860x_driver = {
+	.driver	= {
+		.name	= "88PM860x",
+		.owner	= THIS_MODULE,
+	},
+	.probe		= pm860x_probe,
+	.remove		= __devexit_p(pm860x_remove),
+	.id_table	= pm860x_id_table,
+};
+
+static int __init pm860x_i2c_init(void)
+{
+	int ret;
+	ret = i2c_add_driver(&pm860x_driver);
+	if (ret != 0)
+		pr_err("Failed to register 88PM860x I2C driver: %d\n", ret);
+	return ret;
+}
+subsys_initcall(pm860x_i2c_init);
+
+static void __exit pm860x_i2c_exit(void)
+{
+	i2c_del_driver(&pm860x_driver);
+}
+module_exit(pm860x_i2c_exit);
+
+MODULE_DESCRIPTION("I2C Driver for Marvell 88PM860x");
+MODULE_AUTHOR("Haojian Zhuang <haojian.zhuang@marvell.com>");
+MODULE_LICENSE("GPL");
diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index 87829789243..951fa9b93fb 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -9,6 +9,16 @@ config MFD_CORE
 	tristate
 	default n
 
+config MFD_88PM860X
+	bool "Support Marvell 88PM8606/88PM8607"
+	depends on I2C=y
+	select MFD_CORE
+	help
+	  This supports for Marvell 88PM8606/88PM8607 Power Management IC.
+	  This includes the I2C driver and the core APIs _only_, you have to
+	  select individual components like voltage regulators, RTC and
+	  battery-charger under the corresponding menus.
+
 config MFD_SM501
 	tristate "Support for Silicon Motion SM501"
 	 ---help---
@@ -37,7 +47,7 @@ config MFD_ASIC3
 
 config MFD_SH_MOBILE_SDHI
 	bool "Support for SuperH Mobile SDHI"
-	depends on SUPERH
+	depends on SUPERH || ARCH_SHMOBILE
 	select MFD_CORE
 	 ---help---
 	  This driver supports the SDHI hardware block found in many
@@ -68,6 +78,15 @@ config HTC_PASIC3
 	  HTC Magician devices, respectively. Actual functionality is
 	  handled by the leds-pasic3 and ds1wm drivers.
 
+config HTC_I2CPLD
+	bool "HTC I2C PLD chip support"
+	depends on I2C=y && GPIOLIB
+	help
+	  If you say yes here you get support for the supposed CPLD
+	  found on omap850 HTC devices like the HTC Wizard and HTC Herald.
+	  This device provides input and output GPIOs through an I2C
+	  interface to one or more sub-chips.
+
 config UCB1400_CORE
 	tristate "Philips UCB1400 Core driver"
 	depends on AC97_BUS
@@ -94,7 +113,7 @@ config TPS65010
 
 config MENELAUS
 	bool "Texas Instruments TWL92330/Menelaus PM chip"
-	depends on I2C=y && ARCH_OMAP24XX
+	depends on I2C=y && ARCH_OMAP2
 	help
 	  If you say yes here you get support for the Texas Instruments
 	  TWL92330/Menelaus Power Management chip. This include voltage
@@ -184,6 +203,16 @@ config PMIC_ADP5520
 	  individual components like LCD backlight, LEDs, GPIOs and Kepad
 	  under the corresponding menus.
 
+config MFD_MAX8925
+	bool "Maxim Semiconductor MAX8925 PMIC Support"
+	depends on I2C=y
+	select MFD_CORE
+	help
+	  Say yes here to support for Maxim Semiconductor MAX8925. This is
+	  a Power Management IC. This driver provies common support for
+	  accessing the device, additional drivers must be enabled in order
+	  to use the functionality of the device.
+
 config MFD_WM8400
 	tristate "Support Wolfson Microelectronics WM8400"
 	select MFD_CORE
@@ -205,7 +234,7 @@ config MFD_WM831X
 	  functionality of the device.
 
 config MFD_WM8350
-	tristate
+	bool
 
 config MFD_WM8350_CONFIG_MODE_0
 	bool
@@ -256,9 +285,9 @@ config MFD_WM8352_CONFIG_MODE_3
 	depends on MFD_WM8350
 
 config MFD_WM8350_I2C
-	tristate "Support Wolfson Microelectronics WM8350 with I2C"
+	bool "Support Wolfson Microelectronics WM8350 with I2C"
 	select MFD_WM8350
-	depends on I2C
+	depends on I2C=y
 	help
 	  The WM8350 is an integrated audio and power management
 	  subsystem with watchdog and RTC functionality for embedded
@@ -266,6 +295,18 @@ config MFD_WM8350_I2C
 	  I2C as the control interface.  Additional options must be
 	  selected to enable support for the functionality of the chip.
 
+config MFD_WM8994
+	tristate "Support Wolfson Microelectronics WM8994"
+	select MFD_CORE
+	depends on I2C
+	help
+	  The WM8994 is a highly integrated hi-fi CODEC designed for
+	  smartphone applicatiosn.  As well as audio functionality it
+	  has on board GPIO and regulator functionality which is
+	  supported via the relevant subsystems.  This driver provides
+	  core support for the WM8994, in order to use the actual
+	  functionaltiy of the device other drivers must be enabled.
+
 config MFD_PCF50633
 	tristate "Support for NXP PCF50633"
 	depends on I2C
@@ -300,8 +341,8 @@ config PCF50633_GPIO
 	 the PCF50633 chip.
 
 config AB3100_CORE
-	tristate "ST-Ericsson AB3100 Mixed Signal Circuit core functions"
-	depends on I2C
+	bool "ST-Ericsson AB3100 Mixed Signal Circuit core functions"
+	depends on I2C=y
 	default y if ARCH_U300
 	help
 	  Select this to enable the AB3100 Mixed Signal IC core
@@ -329,16 +370,6 @@ config EZX_PCAP
 	  This enables the PCAP ASIC present on EZX Phones. This is
 	  needed for MMC, TouchScreen, Sound, USB, etc..
 
-config MFD_88PM8607
-	bool "Support Marvell 88PM8607"
-	depends on I2C=y
-	select MFD_CORE
-	help
-	  This supports for Marvell 88PM8607 Power Management IC. This includes
-	  the I2C driver and the core APIs _only_, you have to select
-	  individual components like voltage regulators, RTC and
-	  battery-charger under the corresponding menus.
-
 config AB4500_CORE
 	tristate "ST-Ericsson's AB4500 Mixed Signal Power management chip"
 	depends on SPI
@@ -348,6 +379,25 @@ config AB4500_CORE
 	  read/write functions for the devices to get access to this chip.
 	  This chip embeds various other multimedia funtionalities as well.
 
+config MFD_TIMBERDALE
+	tristate "Support for the Timberdale FPGA"
+	select MFD_CORE
+	depends on PCI && GPIOLIB
+	---help---
+	This is the core driver for the timberdale FPGA. This device is a
+	multifunction device which exposes numerous platform devices.
+
+	The timberdale FPGA can be found on the Intel Atom development board
+	for in-vehicle infontainment, called Russellville.
+
+config LPC_SCH
+	tristate "Intel SCH LPC"
+	depends on PCI
+	select MFD_CORE
+	help
+	  LPC bridge function of the Intel SCH provides support for
+	  System Management Bus and General Purpose I/O.
+
 endmenu
 
 menu "Multimedia Capabilities Port drivers"
diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
index e09eb4870db..22715add99a 100644
--- a/drivers/mfd/Makefile
+++ b/drivers/mfd/Makefile
@@ -2,12 +2,15 @@
 # Makefile for multifunction miscellaneous devices
 #
 
+88pm860x-objs			:= 88pm860x-core.o 88pm860x-i2c.o
+obj-$(CONFIG_MFD_88PM860X)	+= 88pm860x.o
 obj-$(CONFIG_MFD_SM501)		+= sm501.o
 obj-$(CONFIG_MFD_ASIC3)		+= asic3.o tmio_core.o
 obj-$(CONFIG_MFD_SH_MOBILE_SDHI)		+= sh_mobile_sdhi.o
 
 obj-$(CONFIG_HTC_EGPIO)		+= htc-egpio.o
 obj-$(CONFIG_HTC_PASIC3)	+= htc-pasic3.o
+obj-$(CONFIG_HTC_I2CPLD)	+= htc-i2cpld.o
 
 obj-$(CONFIG_MFD_DM355EVM_MSP)	+= dm355evm_msp.o
 
@@ -22,6 +25,7 @@ wm8350-objs			:= wm8350-core.o wm8350-regmap.o wm8350-gpio.o
 wm8350-objs			+= wm8350-irq.o
 obj-$(CONFIG_MFD_WM8350)	+= wm8350.o
 obj-$(CONFIG_MFD_WM8350_I2C)	+= wm8350-i2c.o
+obj-$(CONFIG_MFD_WM8994)	+= wm8994-core.o
 
 obj-$(CONFIG_TPS65010)		+= tps65010.o
 obj-$(CONFIG_MENELAUS)		+= menelaus.o
@@ -47,6 +51,8 @@ endif
 obj-$(CONFIG_UCB1400_CORE)	+= ucb1400_core.o
 
 obj-$(CONFIG_PMIC_DA903X)	+= da903x.o
+max8925-objs			:= max8925-core.o max8925-i2c.o
+obj-$(CONFIG_MFD_MAX8925)	+= max8925.o
 
 obj-$(CONFIG_MFD_PCF50633)	+= pcf50633-core.o
 obj-$(CONFIG_PCF50633_ADC)	+= pcf50633-adc.o
@@ -54,5 +60,6 @@ obj-$(CONFIG_PCF50633_GPIO)	+= pcf50633-gpio.o
 obj-$(CONFIG_AB3100_CORE)	+= ab3100-core.o
 obj-$(CONFIG_AB3100_OTP)	+= ab3100-otp.o
 obj-$(CONFIG_AB4500_CORE)	+= ab4500-core.o
-obj-$(CONFIG_MFD_88PM8607)	+= 88pm8607.o
-obj-$(CONFIG_PMIC_ADP5520)	+= adp5520.o
\ No newline at end of file
+obj-$(CONFIG_MFD_TIMBERDALE)    += timberdale.o
+obj-$(CONFIG_PMIC_ADP5520)	+= adp5520.o
+obj-$(CONFIG_LPC_SCH)		+= lpc_sch.o
\ No newline at end of file
diff --git a/drivers/mfd/ab3100-core.c b/drivers/mfd/ab3100-core.c
index fd42a80e7bf..a2ce3b6af4a 100644
--- a/drivers/mfd/ab3100-core.c
+++ b/drivers/mfd/ab3100-core.c
@@ -1,5 +1,5 @@
 /*
- * Copyright (C) 2007-2009 ST-Ericsson
+ * Copyright (C) 2007-2010 ST-Ericsson
  * License terms: GNU General Public License (GPL) version 2
  * Low-level core for exclusive access to the AB3100 IC on the I2C bus
  * and some basic chip-configuration.
@@ -14,6 +14,7 @@
 #include <linux/platform_device.h>
 #include <linux/device.h>
 #include <linux/interrupt.h>
+#include <linux/random.h>
 #include <linux/debugfs.h>
 #include <linux/seq_file.h>
 #include <linux/uaccess.h>
@@ -365,18 +366,23 @@ int ab3100_event_registers_startup_state_get(struct ab3100 *ab3100,
 }
 EXPORT_SYMBOL(ab3100_event_registers_startup_state_get);
 
-/* Interrupt handling worker */
-static void ab3100_work(struct work_struct *work)
+/*
+ * This is a threaded interrupt handler so we can make some
+ * I2C calls etc.
+ */
+static irqreturn_t ab3100_irq_handler(int irq, void *data)
 {
-	struct ab3100 *ab3100 = container_of(work, struct ab3100, work);
+	struct ab3100 *ab3100 = data;
 	u8 event_regs[3];
 	u32 fatevent;
 	int err;
 
+	add_interrupt_randomness(irq);
+
 	err = ab3100_get_register_page_interruptible(ab3100, AB3100_EVENTA1,
 				       event_regs, 3);
 	if (err)
-		goto err_event_wq;
+		goto err_event;
 
 	fatevent = (event_regs[0] << 16) |
 		(event_regs[1] << 8) |
@@ -398,29 +404,11 @@ static void ab3100_work(struct work_struct *work)
 	dev_dbg(ab3100->dev,
 		"IRQ Event: 0x%08x\n", fatevent);
 
-	/* By now the IRQ should be acked and deasserted so enable it again */
-	enable_irq(ab3100->i2c_client->irq);
-	return;
+	return IRQ_HANDLED;
 
- err_event_wq:
+ err_event:
 	dev_dbg(ab3100->dev,
-		"error in event workqueue\n");
-	/* Enable the IRQ anyway, what choice do we have? */
-	enable_irq(ab3100->i2c_client->irq);
-	return;
-}
-
-static irqreturn_t ab3100_irq_handler(int irq, void *data)
-{
-	struct ab3100 *ab3100 = data;
-	/*
-	 * Disable the IRQ and dispatch a worker to handle the
-	 * event. Since the chip resides on I2C this is slow
-	 * stuff and we will re-enable the interrupts once th
-	 * worker has finished.
-	 */
-	disable_irq_nosync(irq);
-	schedule_work(&ab3100->work);
+		"error reading event status\n");
 	return IRQ_HANDLED;
 }
 
@@ -735,10 +723,7 @@ static struct platform_device ab3100_##devname##_device = {	\
 	.id		= -1,					\
 }
 
-/*
- * This lists all the subdevices and corresponding register
- * ranges.
- */
+/* This lists all the subdevices */
 AB3100_DEVICE(dac, "ab3100-dac");
 AB3100_DEVICE(leds, "ab3100-leds");
 AB3100_DEVICE(power, "ab3100-power");
@@ -904,12 +889,11 @@ static int __init ab3100_probe(struct i2c_client *client,
 	if (err)
 		goto exit_no_setup;
 
-	INIT_WORK(&ab3100->work, ab3100_work);
-
+	err = request_threaded_irq(client->irq, NULL, ab3100_irq_handler,
+				IRQF_ONESHOT, "ab3100-core", ab3100);
 	/* This real unpredictable IRQ is of course sampled for entropy */
-	err = request_irq(client->irq, ab3100_irq_handler,
-			  IRQF_DISABLED | IRQF_SAMPLE_RANDOM,
-			  "AB3100 IRQ", ab3100);
+	rand_initialize_irq(client->irq);
+
 	if (err)
 		goto exit_no_irq;
 
diff --git a/drivers/mfd/ab3100-otp.c b/drivers/mfd/ab3100-otp.c
index 0499b2031a2..b603469dff6 100644
--- a/drivers/mfd/ab3100-otp.c
+++ b/drivers/mfd/ab3100-otp.c
@@ -13,6 +13,7 @@
 #include <linux/platform_device.h>
 #include <linux/mfd/ab3100.h>
 #include <linux/debugfs.h>
+#include <linux/seq_file.h>
 
 /* The OTP registers */
 #define AB3100_OTP0		0xb0
@@ -95,11 +96,10 @@ static int __init ab3100_otp_read(struct ab3100_otp *otp)
  * This is a simple debugfs human-readable file that dumps out
  * the contents of the OTP.
  */
-#ifdef CONFIG_DEBUGFS
-static int show_otp(struct seq_file *s, void *v)
+#ifdef CONFIG_DEBUG_FS
+static int ab3100_show_otp(struct seq_file *s, void *v)
 {
 	struct ab3100_otp *otp = s->private;
-	int err;
 
 	seq_printf(s, "OTP is %s\n", otp->locked ? "LOCKED" : "UNLOCKED");
 	seq_printf(s, "OTP clock switch startup is %uHz\n", otp->freq);
@@ -113,7 +113,7 @@ static int show_otp(struct seq_file *s, void *v)
 
 static int ab3100_otp_open(struct inode *inode, struct file *file)
 {
-	return single_open(file, ab3100_otp_show, inode->i_private);
+	return single_open(file, ab3100_show_otp, inode->i_private);
 }
 
 static const struct file_operations ab3100_otp_operations = {
@@ -131,13 +131,14 @@ static int __init ab3100_otp_init_debugfs(struct device *dev,
 					   &ab3100_otp_operations);
 	if (!otp->debugfs) {
 		dev_err(dev, "AB3100 debugfs OTP file registration failed!\n");
-		return err;
+		return -ENOENT;
 	}
+	return 0;
 }
 
 static void __exit ab3100_otp_exit_debugfs(struct ab3100_otp *otp)
 {
-	debugfs_remove_file(otp->debugfs);
+	debugfs_remove(otp->debugfs);
 }
 #else
 /* Compile this out if debugfs not selected */
diff --git a/drivers/mfd/htc-egpio.c b/drivers/mfd/htc-egpio.c
index aa266e1f69b..addb846c1e3 100644
--- a/drivers/mfd/htc-egpio.c
+++ b/drivers/mfd/htc-egpio.c
@@ -108,7 +108,7 @@ static void egpio_handler(unsigned int irq, struct irq_desc *desc)
 	ack_irqs(ei);
 	/* Process all set pins. */
 	readval &= ei->irqs_enabled;
-	for_each_bit(irqpin, &readval, ei->nirqs) {
+	for_each_set_bit(irqpin, &readval, ei->nirqs) {
 		/* Run irq handler */
 		pr_debug("got IRQ %d\n", irqpin);
 		irq = ei->irq_start + irqpin;
diff --git a/drivers/mfd/htc-i2cpld.c b/drivers/mfd/htc-i2cpld.c
new file mode 100644
index 00000000000..37b9fdab4f3
--- /dev/null
+++ b/drivers/mfd/htc-i2cpld.c
@@ -0,0 +1,710 @@
+/*
+ *  htc-i2cpld.c
+ *  Chip driver for an unknown CPLD chip found on omap850 HTC devices like
+ *  the HTC Wizard and HTC Herald.
+ *  The cpld is located on the i2c bus and acts as an input/output GPIO
+ *  extender.
+ *
+ *  Copyright (C) 2009 Cory Maccarrone <darkstar6262@gmail.com>
+ *
+ *  Based on work done in the linwizard project
+ *  Copyright (C) 2008-2009 Angelo Arrifano <miknix@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <linux/i2c.h>
+#include <linux/irq.h>
+#include <linux/spinlock.h>
+#include <linux/htcpld.h>
+#include <linux/gpio.h>
+
+struct htcpld_chip {
+	spinlock_t              lock;
+
+	/* chip info */
+	u8                      reset;
+	u8                      addr;
+	struct device           *dev;
+	struct i2c_client	*client;
+
+	/* Output details */
+	u8                      cache_out;
+	struct gpio_chip        chip_out;
+
+	/* Input details */
+	u8                      cache_in;
+	struct gpio_chip        chip_in;
+
+	u16                     irqs_enabled;
+	uint                    irq_start;
+	int                     nirqs;
+
+	/*
+	 * Work structure to allow for setting values outside of any
+	 * possible interrupt context
+	 */
+	struct work_struct set_val_work;
+};
+
+struct htcpld_data {
+	/* irq info */
+	u16                irqs_enabled;
+	uint               irq_start;
+	int                nirqs;
+	uint               chained_irq;
+	unsigned int       int_reset_gpio_hi;
+	unsigned int       int_reset_gpio_lo;
+
+	/* htcpld info */
+	struct htcpld_chip *chip;
+	unsigned int       nchips;
+};
+
+/* There does not appear to be a way to proactively mask interrupts
+ * on the htcpld chip itself.  So, we simply ignore interrupts that
+ * aren't desired. */
+static void htcpld_mask(unsigned int irq)
+{
+	struct htcpld_chip *chip = get_irq_chip_data(irq);
+	chip->irqs_enabled &= ~(1 << (irq - chip->irq_start));
+	pr_debug("HTCPLD mask %d %04x\n", irq, chip->irqs_enabled);
+}
+static void htcpld_unmask(unsigned int irq)
+{
+	struct htcpld_chip *chip = get_irq_chip_data(irq);
+	chip->irqs_enabled |= 1 << (irq - chip->irq_start);
+	pr_debug("HTCPLD unmask %d %04x\n", irq, chip->irqs_enabled);
+}
+
+static int htcpld_set_type(unsigned int irq, unsigned int flags)
+{
+	struct irq_desc *d = irq_to_desc(irq);
+
+	if (!d) {
+		pr_err("HTCPLD invalid IRQ: %d\n", irq);
+		return -EINVAL;
+	}
+
+	if (flags & ~IRQ_TYPE_SENSE_MASK)
+		return -EINVAL;
+
+	/* We only allow edge triggering */
+	if (flags & (IRQ_TYPE_LEVEL_LOW|IRQ_TYPE_LEVEL_HIGH))
+		return -EINVAL;
+
+	d->status &= ~IRQ_TYPE_SENSE_MASK;
+	d->status |= flags;
+
+	return 0;
+}
+
+static struct irq_chip htcpld_muxed_chip = {
+	.name     = "htcpld",
+	.mask     = htcpld_mask,
+	.unmask   = htcpld_unmask,
+	.set_type = htcpld_set_type,
+};
+
+/* To properly dispatch IRQ events, we need to read from the
+ * chip.  This is an I2C action that could possibly sleep
+ * (which is bad in interrupt context) -- so we use a threaded
+ * interrupt handler to get around that.
+ */
+static irqreturn_t htcpld_handler(int irq, void *dev)
+{
+	struct htcpld_data *htcpld = dev;
+	unsigned int i;
+	unsigned long flags;
+	int irqpin;
+	struct irq_desc *desc;
+
+	if (!htcpld) {
+		pr_debug("htcpld is null in ISR\n");
+		return IRQ_HANDLED;
+	}
+
+	/*
+	 * For each chip, do a read of the chip and trigger any interrupts
+	 * desired.  The interrupts will be triggered from LSB to MSB (i.e.
+	 * bit 0 first, then bit 1, etc.)
+	 *
+	 * For chips that have no interrupt range specified, just skip 'em.
+	 */
+	for (i = 0; i < htcpld->nchips; i++) {
+		struct htcpld_chip *chip = &htcpld->chip[i];
+		struct i2c_client *client;
+		int val;
+		unsigned long uval, old_val;
+
+		if (!chip) {
+			pr_debug("chip %d is null in ISR\n", i);
+			continue;
+		}
+
+		if (chip->nirqs == 0)
+			continue;
+
+		client = chip->client;
+		if (!client) {
+			pr_debug("client %d is null in ISR\n", i);
+			continue;
+		}
+
+		/* Scan the chip */
+		val = i2c_smbus_read_byte_data(client, chip->cache_out);
+		if (val < 0) {
+			/* Throw a warning and skip this chip */
+			dev_warn(chip->dev, "Unable to read from chip: %d\n",
+				 val);
+			continue;
+		}
+
+		uval = (unsigned long)val;
+
+		spin_lock_irqsave(&chip->lock, flags);
+
+		/* Save away the old value so we can compare it */
+		old_val = chip->cache_in;
+
+		/* Write the new value */
+		chip->cache_in = uval;
+
+		spin_unlock_irqrestore(&chip->lock, flags);
+
+		/*
+		 * For each bit in the data (starting at bit 0), trigger
+		 * associated interrupts.
+		 */
+		for (irqpin = 0; irqpin < chip->nirqs; irqpin++) {
+			unsigned oldb, newb;
+			int flags;
+
+			irq = chip->irq_start + irqpin;
+			desc = irq_to_desc(irq);
+			flags = desc->status;
+
+			/* Run the IRQ handler, but only if the bit value
+			 * changed, and the proper flags are set */
+			oldb = (old_val >> irqpin) & 1;
+			newb = (uval >> irqpin) & 1;
+
+			if ((!oldb && newb && (flags & IRQ_TYPE_EDGE_RISING)) ||
+			    (oldb && !newb &&
+			     (flags & IRQ_TYPE_EDGE_FALLING))) {
+				pr_debug("fire IRQ %d\n", irqpin);
+				desc->handle_irq(irq, desc);
+			}
+		}
+	}
+
+	/*
+	 * In order to continue receiving interrupts, the int_reset_gpio must
+	 * be asserted.
+	 */
+	if (htcpld->int_reset_gpio_hi)
+		gpio_set_value(htcpld->int_reset_gpio_hi, 1);
+	if (htcpld->int_reset_gpio_lo)
+		gpio_set_value(htcpld->int_reset_gpio_lo, 0);
+
+	return IRQ_HANDLED;
+}
+
+/*
+ * The GPIO set routines can be called from interrupt context, especially if,
+ * for example they're attached to the led-gpio framework and a trigger is
+ * enabled.  As such, we declared work above in the htcpld_chip structure,
+ * and that work is scheduled in the set routine.  The kernel can then run
+ * the I2C functions, which will sleep, in process context.
+ */
+void htcpld_chip_set(struct gpio_chip *chip, unsigned offset, int val)
+{
+	struct i2c_client *client;
+	struct htcpld_chip *chip_data;
+	unsigned long flags;
+
+	chip_data = container_of(chip, struct htcpld_chip, chip_out);
+	if (!chip_data)
+		return;
+
+	client = chip_data->client;
+	if (client == NULL)
+		return;
+
+	spin_lock_irqsave(&chip_data->lock, flags);
+	if (val)
+		chip_data->cache_out |= (1 << offset);
+	else
+		chip_data->cache_out &= ~(1 << offset);
+	spin_unlock_irqrestore(&chip_data->lock, flags);
+
+	schedule_work(&(chip_data->set_val_work));
+}
+
+void htcpld_chip_set_ni(struct work_struct *work)
+{
+	struct htcpld_chip *chip_data;
+	struct i2c_client *client;
+
+	chip_data = container_of(work, struct htcpld_chip, set_val_work);
+	client = chip_data->client;
+	i2c_smbus_read_byte_data(client, chip_data->cache_out);
+}
+
+int htcpld_chip_get(struct gpio_chip *chip, unsigned offset)
+{
+	struct htcpld_chip *chip_data;
+	int val = 0;
+	int is_input = 0;
+
+	/* Try out first */
+	chip_data = container_of(chip, struct htcpld_chip, chip_out);
+	if (!chip_data) {
+		/* Try in */
+		is_input = 1;
+		chip_data = container_of(chip, struct htcpld_chip, chip_in);
+		if (!chip_data)
+			return -EINVAL;
+	}
+
+	/* Determine if this is an input or output GPIO */
+	if (!is_input)
+		/* Use the output cache */
+		val = (chip_data->cache_out >> offset) & 1;
+	else
+		/* Use the input cache */
+		val = (chip_data->cache_in >> offset) & 1;
+
+	if (val)
+		return 1;
+	else
+		return 0;
+}
+
+static int htcpld_direction_output(struct gpio_chip *chip,
+					unsigned offset, int value)
+{
+	htcpld_chip_set(chip, offset, value);
+	return 0;
+}
+
+static int htcpld_direction_input(struct gpio_chip *chip,
+					unsigned offset)
+{
+	/*
+	 * No-op: this function can only be called on the input chip.
+	 * We do however make sure the offset is within range.
+	 */
+	return (offset < chip->ngpio) ? 0 : -EINVAL;
+}
+
+int htcpld_chip_to_irq(struct gpio_chip *chip, unsigned offset)
+{
+	struct htcpld_chip *chip_data;
+
+	chip_data = container_of(chip, struct htcpld_chip, chip_in);
+
+	if (offset < chip_data->nirqs)
+		return chip_data->irq_start + offset;
+	else
+		return -EINVAL;
+}
+
+void htcpld_chip_reset(struct i2c_client *client)
+{
+	struct htcpld_chip *chip_data = i2c_get_clientdata(client);
+	if (!chip_data)
+		return;
+
+	i2c_smbus_read_byte_data(
+		client, (chip_data->cache_out = chip_data->reset));
+}
+
+static int __devinit htcpld_setup_chip_irq(
+		struct platform_device *pdev,
+		int chip_index)
+{
+	struct htcpld_data *htcpld;
+	struct device *dev = &pdev->dev;
+	struct htcpld_core_platform_data *pdata;
+	struct htcpld_chip *chip;
+	struct htcpld_chip_platform_data *plat_chip_data;
+	unsigned int irq, irq_end;
+	int ret = 0;
+
+	/* Get the platform and driver data */
+	pdata = dev->platform_data;
+	htcpld = platform_get_drvdata(pdev);
+	chip = &htcpld->chip[chip_index];
+	plat_chip_data = &pdata->chip[chip_index];
+
+	/* Setup irq handlers */
+	irq_end = chip->irq_start + chip->nirqs;
+	for (irq = chip->irq_start; irq < irq_end; irq++) {
+		set_irq_chip(irq, &htcpld_muxed_chip);
+		set_irq_chip_data(irq, chip);
+		set_irq_handler(irq, handle_simple_irq);
+#ifdef CONFIG_ARM
+		set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
+#else
+		set_irq_probe(irq);
+#endif
+	}
+
+	return ret;
+}
+
+static int __devinit htcpld_register_chip_i2c(
+		struct platform_device *pdev,
+		int chip_index)
+{
+	struct htcpld_data *htcpld;
+	struct device *dev = &pdev->dev;
+	struct htcpld_core_platform_data *pdata;
+	struct htcpld_chip *chip;
+	struct htcpld_chip_platform_data *plat_chip_data;
+	struct i2c_adapter *adapter;
+	struct i2c_client *client;
+	struct i2c_board_info info;
+
+	/* Get the platform and driver data */
+	pdata = dev->platform_data;
+	htcpld = platform_get_drvdata(pdev);
+	chip = &htcpld->chip[chip_index];
+	plat_chip_data = &pdata->chip[chip_index];
+
+	adapter = i2c_get_adapter(pdata->i2c_adapter_id);
+	if (adapter == NULL) {
+		/* Eek, no such I2C adapter!  Bail out. */
+		dev_warn(dev, "Chip at i2c address 0x%x: Invalid i2c adapter %d\n",
+			 plat_chip_data->addr, pdata->i2c_adapter_id);
+		return -ENODEV;
+	}
+
+	if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_READ_BYTE_DATA)) {
+		dev_warn(dev, "i2c adapter %d non-functional\n",
+			 pdata->i2c_adapter_id);
+		return -EINVAL;
+	}
+
+	memset(&info, 0, sizeof(struct i2c_board_info));
+	info.addr = plat_chip_data->addr;
+	strlcpy(info.type, "htcpld-chip", I2C_NAME_SIZE);
+	info.platform_data = chip;
+
+	/* Add the I2C device.  This calls the probe() function. */
+	client = i2c_new_device(adapter, &info);
+	if (!client) {
+		/* I2C device registration failed, contineu with the next */
+		dev_warn(dev, "Unable to add I2C device for 0x%x\n",
+			 plat_chip_data->addr);
+		return -ENODEV;
+	}
+
+	i2c_set_clientdata(client, chip);
+	snprintf(client->name, I2C_NAME_SIZE, "Chip_0x%d", client->addr);
+	chip->client = client;
+
+	/* Reset the chip */
+	htcpld_chip_reset(client);
+	chip->cache_in = i2c_smbus_read_byte_data(client, chip->cache_out);
+
+	return 0;
+}
+
+static void __devinit htcpld_unregister_chip_i2c(
+		struct platform_device *pdev,
+		int chip_index)
+{
+	struct htcpld_data *htcpld;
+	struct htcpld_chip *chip;
+
+	/* Get the platform and driver data */
+	htcpld = platform_get_drvdata(pdev);
+	chip = &htcpld->chip[chip_index];
+
+	if (chip->client)
+		i2c_unregister_device(chip->client);
+}
+
+static int __devinit htcpld_register_chip_gpio(
+		struct platform_device *pdev,
+		int chip_index)
+{
+	struct htcpld_data *htcpld;
+	struct device *dev = &pdev->dev;
+	struct htcpld_core_platform_data *pdata;
+	struct htcpld_chip *chip;
+	struct htcpld_chip_platform_data *plat_chip_data;
+	struct gpio_chip *gpio_chip;
+	int ret = 0;
+
+	/* Get the platform and driver data */
+	pdata = dev->platform_data;
+	htcpld = platform_get_drvdata(pdev);
+	chip = &htcpld->chip[chip_index];
+	plat_chip_data = &pdata->chip[chip_index];
+
+	/* Setup the GPIO chips */
+	gpio_chip = &(chip->chip_out);
+	gpio_chip->label           = "htcpld-out";
+	gpio_chip->dev             = dev;
+	gpio_chip->owner           = THIS_MODULE;
+	gpio_chip->get             = htcpld_chip_get;
+	gpio_chip->set             = htcpld_chip_set;
+	gpio_chip->direction_input = NULL;
+	gpio_chip->direction_output = htcpld_direction_output;
+	gpio_chip->base            = plat_chip_data->gpio_out_base;
+	gpio_chip->ngpio           = plat_chip_data->num_gpios;
+
+	gpio_chip = &(chip->chip_in);
+	gpio_chip->label           = "htcpld-in";
+	gpio_chip->dev             = dev;
+	gpio_chip->owner           = THIS_MODULE;
+	gpio_chip->get             = htcpld_chip_get;
+	gpio_chip->set             = NULL;
+	gpio_chip->direction_input = htcpld_direction_input;
+	gpio_chip->direction_output = NULL;
+	gpio_chip->to_irq          = htcpld_chip_to_irq;
+	gpio_chip->base            = plat_chip_data->gpio_in_base;
+	gpio_chip->ngpio           = plat_chip_data->num_gpios;
+
+	/* Add the GPIO chips */
+	ret = gpiochip_add(&(chip->chip_out));
+	if (ret) {
+		dev_warn(dev, "Unable to register output GPIOs for 0x%x: %d\n",
+			 plat_chip_data->addr, ret);
+		return ret;
+	}
+
+	ret = gpiochip_add(&(chip->chip_in));
+	if (ret) {
+		int error;
+
+		dev_warn(dev, "Unable to register input GPIOs for 0x%x: %d\n",
+			 plat_chip_data->addr, ret);
+
+		error = gpiochip_remove(&(chip->chip_out));
+		if (error)
+			dev_warn(dev, "Error while trying to unregister gpio chip: %d\n", error);
+
+		return ret;
+	}
+
+	return 0;
+}
+
+static int __devinit htcpld_setup_chips(struct platform_device *pdev)
+{
+	struct htcpld_data *htcpld;
+	struct device *dev = &pdev->dev;
+	struct htcpld_core_platform_data *pdata;
+	int i;
+
+	/* Get the platform and driver data */
+	pdata = dev->platform_data;
+	htcpld = platform_get_drvdata(pdev);
+
+	/* Setup each chip's output GPIOs */
+	htcpld->nchips = pdata->num_chip;
+	htcpld->chip = kzalloc(sizeof(struct htcpld_chip) * htcpld->nchips,
+			       GFP_KERNEL);
+	if (!htcpld->chip) {
+		dev_warn(dev, "Unable to allocate memory for chips\n");
+		return -ENOMEM;
+	}
+
+	/* Add the chips as best we can */
+	for (i = 0; i < htcpld->nchips; i++) {
+		int ret;
+
+		/* Setup the HTCPLD chips */
+		htcpld->chip[i].reset = pdata->chip[i].reset;
+		htcpld->chip[i].cache_out = pdata->chip[i].reset;
+		htcpld->chip[i].cache_in = 0;
+		htcpld->chip[i].dev = dev;
+		htcpld->chip[i].irq_start = pdata->chip[i].irq_base;
+		htcpld->chip[i].nirqs = pdata->chip[i].num_irqs;
+
+		INIT_WORK(&(htcpld->chip[i].set_val_work), &htcpld_chip_set_ni);
+		spin_lock_init(&(htcpld->chip[i].lock));
+
+		/* Setup the interrupts for the chip */
+		if (htcpld->chained_irq) {
+			ret = htcpld_setup_chip_irq(pdev, i);
+			if (ret)
+				continue;
+		}
+
+		/* Register the chip with I2C */
+		ret = htcpld_register_chip_i2c(pdev, i);
+		if (ret)
+			continue;
+
+
+		/* Register the chips with the GPIO subsystem */
+		ret = htcpld_register_chip_gpio(pdev, i);
+		if (ret) {
+			/* Unregister the chip from i2c and continue */
+			htcpld_unregister_chip_i2c(pdev, i);
+			continue;
+		}
+
+		dev_info(dev, "Registered chip at 0x%x\n", pdata->chip[i].addr);
+	}
+
+	return 0;
+}
+
+static int __devinit htcpld_core_probe(struct platform_device *pdev)
+{
+	struct htcpld_data *htcpld;
+	struct device *dev = &pdev->dev;
+	struct htcpld_core_platform_data *pdata;
+	struct resource *res;
+	int ret = 0;
+
+	if (!dev)
+		return -ENODEV;
+
+	pdata = dev->platform_data;
+	if (!pdata) {
+		dev_warn(dev, "Platform data not found for htcpld core!\n");
+		return -ENXIO;
+	}
+
+	htcpld = kzalloc(sizeof(struct htcpld_data), GFP_KERNEL);
+	if (!htcpld)
+		return -ENOMEM;
+
+	/* Find chained irq */
+	ret = -EINVAL;
+	res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
+	if (res) {
+		int flags;
+		htcpld->chained_irq = res->start;
+
+		/* Setup the chained interrupt handler */
+		flags = IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING;
+		ret = request_threaded_irq(htcpld->chained_irq,
+					   NULL, htcpld_handler,
+					   flags, pdev->name, htcpld);
+		if (ret) {
+			dev_warn(dev, "Unable to setup chained irq handler: %d\n", ret);
+			goto fail;
+		} else
+			device_init_wakeup(dev, 0);
+	}
+
+	/* Set the driver data */
+	platform_set_drvdata(pdev, htcpld);
+
+	/* Setup the htcpld chips */
+	ret = htcpld_setup_chips(pdev);
+	if (ret)
+		goto fail;
+
+	/* Request the GPIO(s) for the int reset and set them up */
+	if (pdata->int_reset_gpio_hi) {
+		ret = gpio_request(pdata->int_reset_gpio_hi, "htcpld-core");
+		if (ret) {
+			/*
+			 * If it failed, that sucks, but we can probably
+			 * continue on without it.
+			 */
+			dev_warn(dev, "Unable to request int_reset_gpio_hi -- interrupts may not work\n");
+			htcpld->int_reset_gpio_hi = 0;
+		} else {
+			htcpld->int_reset_gpio_hi = pdata->int_reset_gpio_hi;
+			gpio_set_value(htcpld->int_reset_gpio_hi, 1);
+		}
+	}
+
+	if (pdata->int_reset_gpio_lo) {
+		ret = gpio_request(pdata->int_reset_gpio_lo, "htcpld-core");
+		if (ret) {
+			/*
+			 * If it failed, that sucks, but we can probably
+			 * continue on without it.
+			 */
+			dev_warn(dev, "Unable to request int_reset_gpio_lo -- interrupts may not work\n");
+			htcpld->int_reset_gpio_lo = 0;
+		} else {
+			htcpld->int_reset_gpio_lo = pdata->int_reset_gpio_lo;
+			gpio_set_value(htcpld->int_reset_gpio_lo, 0);
+		}
+	}
+
+	dev_info(dev, "Initialized successfully\n");
+	return 0;
+
+fail:
+	kfree(htcpld);
+	return ret;
+}
+
+/* The I2C Driver -- used internally */
+static const struct i2c_device_id htcpld_chip_id[] = {
+	{ "htcpld-chip", 0 },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, htcpld_chip_id);
+
+
+static struct i2c_driver htcpld_chip_driver = {
+	.driver = {
+		.name	= "htcpld-chip",
+	},
+	.id_table = htcpld_chip_id,
+};
+
+/* The Core Driver */
+static struct platform_driver htcpld_core_driver = {
+	.driver = {
+		.name = "i2c-htcpld",
+	},
+};
+
+static int __init htcpld_core_init(void)
+{
+	int ret;
+
+	/* Register the I2C Chip driver */
+	ret = i2c_add_driver(&htcpld_chip_driver);
+	if (ret)
+		return ret;
+
+	/* Probe for our chips */
+	return platform_driver_probe(&htcpld_core_driver, htcpld_core_probe);
+}
+
+static void __exit htcpld_core_exit(void)
+{
+	i2c_del_driver(&htcpld_chip_driver);
+	platform_driver_unregister(&htcpld_core_driver);
+}
+
+module_init(htcpld_core_init);
+module_exit(htcpld_core_exit);
+
+MODULE_AUTHOR("Cory Maccarrone <darkstar6262@gmail.com>");
+MODULE_DESCRIPTION("I2C HTC PLD Driver");
+MODULE_LICENSE("GPL");
+
diff --git a/drivers/mfd/lpc_sch.c b/drivers/mfd/lpc_sch.c
new file mode 100644
index 00000000000..51b2f6065a0
--- /dev/null
+++ b/drivers/mfd/lpc_sch.c
@@ -0,0 +1,133 @@
+/*
+ *  lpc_sch.c - LPC interface for Intel Poulsbo SCH
+ *
+ *  LPC bridge function of the Intel SCH contains many other
+ *  functional units, such as Interrupt controllers, Timers,
+ *  Power Management, System Management, GPIO, RTC, and LPC
+ *  Configuration Registers.
+ *
+ *  Copyright (c) 2010 CompuLab Ltd
+ *  Author: Denis Turischev <denis@compulab.co.il>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License 2 as published
+ *  by the Free Software Foundation.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; see the file COPYING.  If not, write to
+ *  the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/errno.h>
+#include <linux/acpi.h>
+#include <linux/pci.h>
+#include <linux/mfd/core.h>
+
+#define SMBASE		0x40
+#define SMBUS_IO_SIZE	64
+
+#define GPIOBASE	0x44
+#define GPIO_IO_SIZE	64
+
+static struct resource smbus_sch_resource = {
+		.flags = IORESOURCE_IO,
+};
+
+
+static struct resource gpio_sch_resource = {
+		.flags = IORESOURCE_IO,
+};
+
+static struct mfd_cell lpc_sch_cells[] = {
+	{
+		.name = "isch_smbus",
+		.num_resources = 1,
+		.resources = &smbus_sch_resource,
+	},
+	{
+		.name = "sch_gpio",
+		.num_resources = 1,
+		.resources = &gpio_sch_resource,
+	},
+};
+
+static struct pci_device_id lpc_sch_ids[] = {
+	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_SCH_LPC) },
+	{ 0, }
+};
+MODULE_DEVICE_TABLE(pci, lpc_sch_ids);
+
+static int __devinit lpc_sch_probe(struct pci_dev *dev,
+				const struct pci_device_id *id)
+{
+	unsigned int base_addr_cfg;
+	unsigned short base_addr;
+
+	pci_read_config_dword(dev, SMBASE, &base_addr_cfg);
+	if (!(base_addr_cfg & (1 << 31))) {
+		dev_err(&dev->dev, "Decode of the SMBus I/O range disabled\n");
+		return -ENODEV;
+	}
+	base_addr = (unsigned short)base_addr_cfg;
+	if (base_addr == 0) {
+		dev_err(&dev->dev, "I/O space for SMBus uninitialized\n");
+		return -ENODEV;
+	}
+
+	smbus_sch_resource.start = base_addr;
+	smbus_sch_resource.end = base_addr + SMBUS_IO_SIZE - 1;
+
+	pci_read_config_dword(dev, GPIOBASE, &base_addr_cfg);
+	if (!(base_addr_cfg & (1 << 31))) {
+		dev_err(&dev->dev, "Decode of the GPIO I/O range disabled\n");
+		return -ENODEV;
+	}
+	base_addr = (unsigned short)base_addr_cfg;
+	if (base_addr == 0) {
+		dev_err(&dev->dev, "I/O space for GPIO uninitialized\n");
+		return -ENODEV;
+	}
+
+	gpio_sch_resource.start = base_addr;
+	gpio_sch_resource.end = base_addr + GPIO_IO_SIZE - 1;
+
+	return mfd_add_devices(&dev->dev, -1,
+			lpc_sch_cells, ARRAY_SIZE(lpc_sch_cells), NULL, 0);
+}
+
+static void __devexit lpc_sch_remove(struct pci_dev *dev)
+{
+	mfd_remove_devices(&dev->dev);
+}
+
+static struct pci_driver lpc_sch_driver = {
+	.name		= "lpc_sch",
+	.id_table	= lpc_sch_ids,
+	.probe		= lpc_sch_probe,
+	.remove		= __devexit_p(lpc_sch_remove),
+};
+
+static int __init lpc_sch_init(void)
+{
+	return pci_register_driver(&lpc_sch_driver);
+}
+
+static void __exit lpc_sch_exit(void)
+{
+	pci_unregister_driver(&lpc_sch_driver);
+}
+
+module_init(lpc_sch_init);
+module_exit(lpc_sch_exit);
+
+MODULE_AUTHOR("Denis Turischev <denis@compulab.co.il>");
+MODULE_DESCRIPTION("LPC interface for Intel Poulsbo SCH");
+MODULE_LICENSE("GPL");
diff --git a/drivers/mfd/max8925-core.c b/drivers/mfd/max8925-core.c
new file mode 100644
index 00000000000..85d63c04749
--- /dev/null
+++ b/drivers/mfd/max8925-core.c
@@ -0,0 +1,656 @@
+/*
+ * Base driver for Maxim MAX8925
+ *
+ * Copyright (C) 2009-2010 Marvell International Ltd.
+ *	Haojian Zhuang <haojian.zhuang@marvell.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/i2c.h>
+#include <linux/irq.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <linux/mfd/core.h>
+#include <linux/mfd/max8925.h>
+
+static struct resource backlight_resources[] = {
+	{
+		.name	= "max8925-backlight",
+		.start	= MAX8925_WLED_MODE_CNTL,
+		.end	= MAX8925_WLED_CNTL,
+		.flags	= IORESOURCE_IO,
+	},
+};
+
+static struct mfd_cell backlight_devs[] = {
+	{
+		.name		= "max8925-backlight",
+		.num_resources	= 1,
+		.resources	= &backlight_resources[0],
+		.id		= -1,
+	},
+};
+
+static struct resource touch_resources[] = {
+	{
+		.name	= "max8925-tsc",
+		.start	= MAX8925_TSC_IRQ,
+		.end	= MAX8925_ADC_RES_END,
+		.flags	= IORESOURCE_IO,
+	},
+};
+
+static struct mfd_cell touch_devs[] = {
+	{
+		.name		= "max8925-touch",
+		.num_resources	= 1,
+		.resources	= &touch_resources[0],
+		.id		= -1,
+	},
+};
+
+static struct resource power_supply_resources[] = {
+	{
+		.name	= "max8925-power",
+		.start	= MAX8925_CHG_IRQ1,
+		.end	= MAX8925_CHG_IRQ1_MASK,
+		.flags	= IORESOURCE_IO,
+	},
+};
+
+static struct mfd_cell power_devs[] = {
+	{
+		.name		= "max8925-power",
+		.num_resources	= 1,
+		.resources	= &power_supply_resources[0],
+		.id		= -1,
+	},
+};
+
+static struct resource rtc_resources[] = {
+	{
+		.name	= "max8925-rtc",
+		.start	= MAX8925_RTC_IRQ,
+		.end	= MAX8925_RTC_IRQ_MASK,
+		.flags	= IORESOURCE_IO,
+	},
+};
+
+static struct mfd_cell rtc_devs[] = {
+	{
+		.name		= "max8925-rtc",
+		.num_resources	= 1,
+		.resources	= &rtc_resources[0],
+		.id		= -1,
+	},
+};
+
+#define MAX8925_REG_RESOURCE(_start, _end)	\
+{						\
+	.start	= MAX8925_##_start,		\
+	.end	= MAX8925_##_end,		\
+	.flags	= IORESOURCE_IO,		\
+}
+
+static struct resource regulator_resources[] = {
+	MAX8925_REG_RESOURCE(SDCTL1, SDCTL1),
+	MAX8925_REG_RESOURCE(SDCTL2, SDCTL2),
+	MAX8925_REG_RESOURCE(SDCTL3, SDCTL3),
+	MAX8925_REG_RESOURCE(LDOCTL1, LDOCTL1),
+	MAX8925_REG_RESOURCE(LDOCTL2, LDOCTL2),
+	MAX8925_REG_RESOURCE(LDOCTL3, LDOCTL3),
+	MAX8925_REG_RESOURCE(LDOCTL4, LDOCTL4),
+	MAX8925_REG_RESOURCE(LDOCTL5, LDOCTL5),
+	MAX8925_REG_RESOURCE(LDOCTL6, LDOCTL6),
+	MAX8925_REG_RESOURCE(LDOCTL7, LDOCTL7),
+	MAX8925_REG_RESOURCE(LDOCTL8, LDOCTL8),
+	MAX8925_REG_RESOURCE(LDOCTL9, LDOCTL9),
+	MAX8925_REG_RESOURCE(LDOCTL10, LDOCTL10),
+	MAX8925_REG_RESOURCE(LDOCTL11, LDOCTL11),
+	MAX8925_REG_RESOURCE(LDOCTL12, LDOCTL12),
+	MAX8925_REG_RESOURCE(LDOCTL13, LDOCTL13),
+	MAX8925_REG_RESOURCE(LDOCTL14, LDOCTL14),
+	MAX8925_REG_RESOURCE(LDOCTL15, LDOCTL15),
+	MAX8925_REG_RESOURCE(LDOCTL16, LDOCTL16),
+	MAX8925_REG_RESOURCE(LDOCTL17, LDOCTL17),
+	MAX8925_REG_RESOURCE(LDOCTL18, LDOCTL18),
+	MAX8925_REG_RESOURCE(LDOCTL19, LDOCTL19),
+	MAX8925_REG_RESOURCE(LDOCTL20, LDOCTL20),
+};
+
+#define MAX8925_REG_DEVS(_id)						\
+{									\
+	.name		= "max8925-regulator",				\
+	.num_resources	= 1,						\
+	.resources	= &regulator_resources[MAX8925_ID_##_id],	\
+	.id		= MAX8925_ID_##_id,				\
+}
+
+static struct mfd_cell regulator_devs[] = {
+	MAX8925_REG_DEVS(SD1),
+	MAX8925_REG_DEVS(SD2),
+	MAX8925_REG_DEVS(SD3),
+	MAX8925_REG_DEVS(LDO1),
+	MAX8925_REG_DEVS(LDO2),
+	MAX8925_REG_DEVS(LDO3),
+	MAX8925_REG_DEVS(LDO4),
+	MAX8925_REG_DEVS(LDO5),
+	MAX8925_REG_DEVS(LDO6),
+	MAX8925_REG_DEVS(LDO7),
+	MAX8925_REG_DEVS(LDO8),
+	MAX8925_REG_DEVS(LDO9),
+	MAX8925_REG_DEVS(LDO10),
+	MAX8925_REG_DEVS(LDO11),
+	MAX8925_REG_DEVS(LDO12),
+	MAX8925_REG_DEVS(LDO13),
+	MAX8925_REG_DEVS(LDO14),
+	MAX8925_REG_DEVS(LDO15),
+	MAX8925_REG_DEVS(LDO16),
+	MAX8925_REG_DEVS(LDO17),
+	MAX8925_REG_DEVS(LDO18),
+	MAX8925_REG_DEVS(LDO19),
+	MAX8925_REG_DEVS(LDO20),
+};
+
+enum {
+	FLAGS_ADC = 1,	/* register in ADC component */
+	FLAGS_RTC,	/* register in RTC component */
+};
+
+struct max8925_irq_data {
+	int	reg;
+	int	mask_reg;
+	int	enable;		/* enable or not */
+	int	offs;		/* bit offset in mask register */
+	int	flags;
+	int	tsc_irq;
+};
+
+static struct max8925_irq_data max8925_irqs[] = {
+	[MAX8925_IRQ_VCHG_DC_OVP] = {
+		.reg		= MAX8925_CHG_IRQ1,
+		.mask_reg	= MAX8925_CHG_IRQ1_MASK,
+		.offs		= 1 << 0,
+	},
+	[MAX8925_IRQ_VCHG_DC_F] = {
+		.reg		= MAX8925_CHG_IRQ1,
+		.mask_reg	= MAX8925_CHG_IRQ1_MASK,
+		.offs		= 1 << 1,
+	},
+	[MAX8925_IRQ_VCHG_DC_R] = {
+		.reg		= MAX8925_CHG_IRQ1,
+		.mask_reg	= MAX8925_CHG_IRQ1_MASK,
+		.offs		= 1 << 2,
+	},
+	[MAX8925_IRQ_VCHG_USB_OVP] = {
+		.reg		= MAX8925_CHG_IRQ1,
+		.mask_reg	= MAX8925_CHG_IRQ1_MASK,
+		.offs		= 1 << 3,
+	},
+	[MAX8925_IRQ_VCHG_USB_F] =  {
+		.reg		= MAX8925_CHG_IRQ1,
+		.mask_reg	= MAX8925_CHG_IRQ1_MASK,
+		.offs		= 1 << 4,
+	},
+	[MAX8925_IRQ_VCHG_USB_R] = {
+		.reg		= MAX8925_CHG_IRQ1,
+		.mask_reg	= MAX8925_CHG_IRQ1_MASK,
+		.offs		= 1 << 5,
+	},
+	[MAX8925_IRQ_VCHG_THM_OK_R] = {
+		.reg		= MAX8925_CHG_IRQ2,
+		.mask_reg	= MAX8925_CHG_IRQ2_MASK,
+		.offs		= 1 << 0,
+	},
+	[MAX8925_IRQ_VCHG_THM_OK_F] = {
+		.reg		= MAX8925_CHG_IRQ2,
+		.mask_reg	= MAX8925_CHG_IRQ2_MASK,
+		.offs		= 1 << 1,
+	},
+	[MAX8925_IRQ_VCHG_SYSLOW_F] = {
+		.reg		= MAX8925_CHG_IRQ2,
+		.mask_reg	= MAX8925_CHG_IRQ2_MASK,
+		.offs		= 1 << 2,
+	},
+	[MAX8925_IRQ_VCHG_SYSLOW_R] = {
+		.reg		= MAX8925_CHG_IRQ2,
+		.mask_reg	= MAX8925_CHG_IRQ2_MASK,
+		.offs		= 1 << 3,
+	},
+	[MAX8925_IRQ_VCHG_RST] = {
+		.reg		= MAX8925_CHG_IRQ2,
+		.mask_reg	= MAX8925_CHG_IRQ2_MASK,
+		.offs		= 1 << 4,
+	},
+	[MAX8925_IRQ_VCHG_DONE] = {
+		.reg		= MAX8925_CHG_IRQ2,
+		.mask_reg	= MAX8925_CHG_IRQ2_MASK,
+		.offs		= 1 << 5,
+	},
+	[MAX8925_IRQ_VCHG_TOPOFF] = {
+		.reg		= MAX8925_CHG_IRQ2,
+		.mask_reg	= MAX8925_CHG_IRQ2_MASK,
+		.offs		= 1 << 6,
+	},
+	[MAX8925_IRQ_VCHG_TMR_FAULT] = {
+		.reg		= MAX8925_CHG_IRQ2,
+		.mask_reg	= MAX8925_CHG_IRQ2_MASK,
+		.offs		= 1 << 7,
+	},
+	[MAX8925_IRQ_GPM_RSTIN] = {
+		.reg		= MAX8925_ON_OFF_IRQ1,
+		.mask_reg	= MAX8925_ON_OFF_IRQ1_MASK,
+		.offs		= 1 << 0,
+	},
+	[MAX8925_IRQ_GPM_MPL] = {
+		.reg		= MAX8925_ON_OFF_IRQ1,
+		.mask_reg	= MAX8925_ON_OFF_IRQ1_MASK,
+		.offs		= 1 << 1,
+	},
+	[MAX8925_IRQ_GPM_SW_3SEC] = {
+		.reg		= MAX8925_ON_OFF_IRQ1,
+		.mask_reg	= MAX8925_ON_OFF_IRQ1_MASK,
+		.offs		= 1 << 2,
+	},
+	[MAX8925_IRQ_GPM_EXTON_F] = {
+		.reg		= MAX8925_ON_OFF_IRQ1,
+		.mask_reg	= MAX8925_ON_OFF_IRQ1_MASK,
+		.offs		= 1 << 3,
+	},
+	[MAX8925_IRQ_GPM_EXTON_R] = {
+		.reg		= MAX8925_ON_OFF_IRQ1,
+		.mask_reg	= MAX8925_ON_OFF_IRQ1_MASK,
+		.offs		= 1 << 4,
+	},
+	[MAX8925_IRQ_GPM_SW_1SEC] = {
+		.reg		= MAX8925_ON_OFF_IRQ1,
+		.mask_reg	= MAX8925_ON_OFF_IRQ1_MASK,
+		.offs		= 1 << 5,
+	},
+	[MAX8925_IRQ_GPM_SW_F] = {
+		.reg		= MAX8925_ON_OFF_IRQ1,
+		.mask_reg	= MAX8925_ON_OFF_IRQ1_MASK,
+		.offs		= 1 << 6,
+	},
+	[MAX8925_IRQ_GPM_SW_R] = {
+		.reg		= MAX8925_ON_OFF_IRQ1,
+		.mask_reg	= MAX8925_ON_OFF_IRQ1_MASK,
+		.offs		= 1 << 7,
+	},
+	[MAX8925_IRQ_GPM_SYSCKEN_F] = {
+		.reg		= MAX8925_ON_OFF_IRQ2,
+		.mask_reg	= MAX8925_ON_OFF_IRQ2_MASK,
+		.offs		= 1 << 0,
+	},
+	[MAX8925_IRQ_GPM_SYSCKEN_R] = {
+		.reg		= MAX8925_ON_OFF_IRQ2,
+		.mask_reg	= MAX8925_ON_OFF_IRQ2_MASK,
+		.offs		= 1 << 1,
+	},
+	[MAX8925_IRQ_RTC_ALARM1] = {
+		.reg		= MAX8925_RTC_IRQ,
+		.mask_reg	= MAX8925_RTC_IRQ_MASK,
+		.offs		= 1 << 2,
+		.flags		= FLAGS_RTC,
+	},
+	[MAX8925_IRQ_RTC_ALARM0] = {
+		.reg		= MAX8925_RTC_IRQ,
+		.mask_reg	= MAX8925_RTC_IRQ_MASK,
+		.offs		= 1 << 3,
+		.flags		= FLAGS_RTC,
+	},
+	[MAX8925_IRQ_TSC_STICK] = {
+		.reg		= MAX8925_TSC_IRQ,
+		.mask_reg	= MAX8925_TSC_IRQ_MASK,
+		.offs		= 1 << 0,
+		.flags		= FLAGS_ADC,
+		.tsc_irq	= 1,
+	},
+	[MAX8925_IRQ_TSC_NSTICK] = {
+		.reg		= MAX8925_TSC_IRQ,
+		.mask_reg	= MAX8925_TSC_IRQ_MASK,
+		.offs		= 1 << 1,
+		.flags		= FLAGS_ADC,
+		.tsc_irq	= 1,
+	},
+};
+
+static inline struct max8925_irq_data *irq_to_max8925(struct max8925_chip *chip,
+						      int irq)
+{
+	return &max8925_irqs[irq - chip->irq_base];
+}
+
+static irqreturn_t max8925_irq(int irq, void *data)
+{
+	struct max8925_chip *chip = data;
+	struct max8925_irq_data *irq_data;
+	struct i2c_client *i2c;
+	int read_reg = -1, value = 0;
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(max8925_irqs); i++) {
+		irq_data = &max8925_irqs[i];
+		/* TSC IRQ should be serviced in max8925_tsc_irq() */
+		if (irq_data->tsc_irq)
+			continue;
+		if (irq_data->flags == FLAGS_RTC)
+			i2c = chip->rtc;
+		else if (irq_data->flags == FLAGS_ADC)
+			i2c = chip->adc;
+		else
+			i2c = chip->i2c;
+		if (read_reg != irq_data->reg) {
+			read_reg = irq_data->reg;
+			value = max8925_reg_read(i2c, irq_data->reg);
+		}
+		if (value & irq_data->enable)
+			handle_nested_irq(chip->irq_base + i);
+	}
+	return IRQ_HANDLED;
+}
+
+static irqreturn_t max8925_tsc_irq(int irq, void *data)
+{
+	struct max8925_chip *chip = data;
+	struct max8925_irq_data *irq_data;
+	struct i2c_client *i2c;
+	int read_reg = -1, value = 0;
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(max8925_irqs); i++) {
+		irq_data = &max8925_irqs[i];
+		/* non TSC IRQ should be serviced in max8925_irq() */
+		if (!irq_data->tsc_irq)
+			continue;
+		if (irq_data->flags == FLAGS_RTC)
+			i2c = chip->rtc;
+		else if (irq_data->flags == FLAGS_ADC)
+			i2c = chip->adc;
+		else
+			i2c = chip->i2c;
+		if (read_reg != irq_data->reg) {
+			read_reg = irq_data->reg;
+			value = max8925_reg_read(i2c, irq_data->reg);
+		}
+		if (value & irq_data->enable)
+			handle_nested_irq(chip->irq_base + i);
+	}
+	return IRQ_HANDLED;
+}
+
+static void max8925_irq_lock(unsigned int irq)
+{
+	struct max8925_chip *chip = get_irq_chip_data(irq);
+
+	mutex_lock(&chip->irq_lock);
+}
+
+static void max8925_irq_sync_unlock(unsigned int irq)
+{
+	struct max8925_chip *chip = get_irq_chip_data(irq);
+	struct max8925_irq_data *irq_data;
+	static unsigned char cache_chg[2] = {0xff, 0xff};
+	static unsigned char cache_on[2] = {0xff, 0xff};
+	static unsigned char cache_rtc = 0xff, cache_tsc = 0xff;
+	unsigned char irq_chg[2], irq_on[2];
+	unsigned char irq_rtc, irq_tsc;
+	int i;
+
+	/* Load cached value. In initial, all IRQs are masked */
+	irq_chg[0] = cache_chg[0];
+	irq_chg[1] = cache_chg[1];
+	irq_on[0] = cache_on[0];
+	irq_on[1] = cache_on[1];
+	irq_rtc = cache_rtc;
+	irq_tsc = cache_tsc;
+	for (i = 0; i < ARRAY_SIZE(max8925_irqs); i++) {
+		irq_data = &max8925_irqs[i];
+		switch (irq_data->mask_reg) {
+		case MAX8925_CHG_IRQ1_MASK:
+			irq_chg[0] &= irq_data->enable;
+			break;
+		case MAX8925_CHG_IRQ2_MASK:
+			irq_chg[1] &= irq_data->enable;
+			break;
+		case MAX8925_ON_OFF_IRQ1_MASK:
+			irq_on[0] &= irq_data->enable;
+			break;
+		case MAX8925_ON_OFF_IRQ2_MASK:
+			irq_on[1] &= irq_data->enable;
+			break;
+		case MAX8925_RTC_IRQ_MASK:
+			irq_rtc &= irq_data->enable;
+			break;
+		case MAX8925_TSC_IRQ_MASK:
+			irq_tsc &= irq_data->enable;
+			break;
+		default:
+			dev_err(chip->dev, "wrong IRQ\n");
+			break;
+		}
+	}
+	/* update mask into registers */
+	if (cache_chg[0] != irq_chg[0]) {
+		cache_chg[0] = irq_chg[0];
+		max8925_reg_write(chip->i2c, MAX8925_CHG_IRQ1_MASK,
+			irq_chg[0]);
+	}
+	if (cache_chg[1] != irq_chg[1]) {
+		cache_chg[1] = irq_chg[1];
+		max8925_reg_write(chip->i2c, MAX8925_CHG_IRQ2_MASK,
+			irq_chg[1]);
+	}
+	if (cache_on[0] != irq_on[0]) {
+		cache_on[0] = irq_on[0];
+		max8925_reg_write(chip->i2c, MAX8925_ON_OFF_IRQ1_MASK,
+				irq_on[0]);
+	}
+	if (cache_on[1] != irq_on[1]) {
+		cache_on[1] = irq_on[1];
+		max8925_reg_write(chip->i2c, MAX8925_ON_OFF_IRQ2_MASK,
+				irq_on[1]);
+	}
+	if (cache_rtc != irq_rtc) {
+		cache_rtc = irq_rtc;
+		max8925_reg_write(chip->rtc, MAX8925_RTC_IRQ_MASK, irq_rtc);
+	}
+	if (cache_tsc != irq_tsc) {
+		cache_tsc = irq_tsc;
+		max8925_reg_write(chip->adc, MAX8925_TSC_IRQ_MASK, irq_tsc);
+	}
+
+	mutex_unlock(&chip->irq_lock);
+}
+
+static void max8925_irq_enable(unsigned int irq)
+{
+	struct max8925_chip *chip = get_irq_chip_data(irq);
+	max8925_irqs[irq - chip->irq_base].enable
+		= max8925_irqs[irq - chip->irq_base].offs;
+}
+
+static void max8925_irq_disable(unsigned int irq)
+{
+	struct max8925_chip *chip = get_irq_chip_data(irq);
+	max8925_irqs[irq - chip->irq_base].enable = 0;
+}
+
+static struct irq_chip max8925_irq_chip = {
+	.name		= "max8925",
+	.bus_lock	= max8925_irq_lock,
+	.bus_sync_unlock = max8925_irq_sync_unlock,
+	.enable		= max8925_irq_enable,
+	.disable	= max8925_irq_disable,
+};
+
+static int max8925_irq_init(struct max8925_chip *chip, int irq,
+			    struct max8925_platform_data *pdata)
+{
+	unsigned long flags = IRQF_TRIGGER_FALLING | IRQF_ONESHOT;
+	struct irq_desc *desc;
+	int i, ret;
+	int __irq;
+
+	if (!pdata || !pdata->irq_base) {
+		dev_warn(chip->dev, "No interrupt support on IRQ base\n");
+		return -EINVAL;
+	}
+	/* clear all interrupts */
+	max8925_reg_read(chip->i2c, MAX8925_CHG_IRQ1);
+	max8925_reg_read(chip->i2c, MAX8925_CHG_IRQ2);
+	max8925_reg_read(chip->i2c, MAX8925_ON_OFF_IRQ1);
+	max8925_reg_read(chip->i2c, MAX8925_ON_OFF_IRQ2);
+	max8925_reg_read(chip->rtc, MAX8925_RTC_IRQ);
+	max8925_reg_read(chip->adc, MAX8925_TSC_IRQ);
+	/* mask all interrupts */
+	max8925_reg_write(chip->rtc, MAX8925_ALARM0_CNTL, 0);
+	max8925_reg_write(chip->rtc, MAX8925_ALARM1_CNTL, 0);
+	max8925_reg_write(chip->i2c, MAX8925_CHG_IRQ1_MASK, 0xff);
+	max8925_reg_write(chip->i2c, MAX8925_CHG_IRQ2_MASK, 0xff);
+	max8925_reg_write(chip->i2c, MAX8925_ON_OFF_IRQ1_MASK, 0xff);
+	max8925_reg_write(chip->i2c, MAX8925_ON_OFF_IRQ2_MASK, 0xff);
+	max8925_reg_write(chip->rtc, MAX8925_RTC_IRQ_MASK, 0xff);
+	max8925_reg_write(chip->adc, MAX8925_TSC_IRQ_MASK, 0xff);
+
+	mutex_init(&chip->irq_lock);
+	chip->core_irq = irq;
+	chip->irq_base = pdata->irq_base;
+	desc = irq_to_desc(chip->core_irq);
+
+	/* register with genirq */
+	for (i = 0; i < ARRAY_SIZE(max8925_irqs); i++) {
+		__irq = i + chip->irq_base;
+		set_irq_chip_data(__irq, chip);
+		set_irq_chip_and_handler(__irq, &max8925_irq_chip,
+					 handle_edge_irq);
+		set_irq_nested_thread(__irq, 1);
+#ifdef CONFIG_ARM
+		set_irq_flags(__irq, IRQF_VALID);
+#else
+		set_irq_noprobe(__irq);
+#endif
+	}
+	if (!irq) {
+		dev_warn(chip->dev, "No interrupt support on core IRQ\n");
+		goto tsc_irq;
+	}
+
+	ret = request_threaded_irq(irq, NULL, max8925_irq, flags,
+				   "max8925", chip);
+	if (ret) {
+		dev_err(chip->dev, "Failed to request core IRQ: %d\n", ret);
+		chip->core_irq = 0;
+	}
+tsc_irq:
+	if (!pdata->tsc_irq) {
+		dev_warn(chip->dev, "No interrupt support on TSC IRQ\n");
+		return 0;
+	}
+	chip->tsc_irq = pdata->tsc_irq;
+
+	ret = request_threaded_irq(chip->tsc_irq, NULL, max8925_tsc_irq,
+				   flags, "max8925-tsc", chip);
+	if (ret) {
+		dev_err(chip->dev, "Failed to request TSC IRQ: %d\n", ret);
+		chip->tsc_irq = 0;
+	}
+	return 0;
+}
+
+int __devinit max8925_device_init(struct max8925_chip *chip,
+				  struct max8925_platform_data *pdata)
+{
+	int ret;
+
+	max8925_irq_init(chip, chip->i2c->irq, pdata);
+
+	if (pdata && (pdata->power || pdata->touch)) {
+		/* enable ADC to control internal reference */
+		max8925_set_bits(chip->i2c, MAX8925_RESET_CNFG, 1, 1);
+		/* enable internal reference for ADC */
+		max8925_set_bits(chip->adc, MAX8925_TSC_CNFG1, 3, 2);
+		/* check for internal reference IRQ */
+		do {
+			ret = max8925_reg_read(chip->adc, MAX8925_TSC_IRQ);
+		} while (ret & MAX8925_NREF_OK);
+		/* enaable ADC scheduler, interval is 1 second */
+		max8925_set_bits(chip->adc, MAX8925_ADC_SCHED, 3, 2);
+	}
+
+	/* enable Momentary Power Loss */
+	max8925_set_bits(chip->rtc, MAX8925_MPL_CNTL, 1 << 4, 1 << 4);
+
+	ret = mfd_add_devices(chip->dev, 0, &rtc_devs[0],
+			      ARRAY_SIZE(rtc_devs),
+			      &rtc_resources[0], 0);
+	if (ret < 0) {
+		dev_err(chip->dev, "Failed to add rtc subdev\n");
+		goto out;
+	}
+	if (pdata && pdata->regulator[0]) {
+		ret = mfd_add_devices(chip->dev, 0, &regulator_devs[0],
+				      ARRAY_SIZE(regulator_devs),
+				      &regulator_resources[0], 0);
+		if (ret < 0) {
+			dev_err(chip->dev, "Failed to add regulator subdev\n");
+			goto out_dev;
+		}
+	}
+
+	if (pdata && pdata->backlight) {
+		ret = mfd_add_devices(chip->dev, 0, &backlight_devs[0],
+				      ARRAY_SIZE(backlight_devs),
+				      &backlight_resources[0], 0);
+		if (ret < 0) {
+			dev_err(chip->dev, "Failed to add backlight subdev\n");
+			goto out_dev;
+		}
+	}
+
+	if (pdata && pdata->power) {
+		ret = mfd_add_devices(chip->dev, 0, &power_devs[0],
+					ARRAY_SIZE(power_devs),
+					&power_supply_resources[0], 0);
+		if (ret < 0) {
+			dev_err(chip->dev, "Failed to add power supply "
+				"subdev\n");
+			goto out_dev;
+		}
+	}
+
+	if (pdata && pdata->touch) {
+		ret = mfd_add_devices(chip->dev, 0, &touch_devs[0],
+				      ARRAY_SIZE(touch_devs),
+				      &touch_resources[0], 0);
+		if (ret < 0) {
+			dev_err(chip->dev, "Failed to add touch subdev\n");
+			goto out_dev;
+		}
+	}
+
+	return 0;
+out_dev:
+	mfd_remove_devices(chip->dev);
+out:
+	return ret;
+}
+
+void __devexit max8925_device_exit(struct max8925_chip *chip)
+{
+	if (chip->core_irq)
+		free_irq(chip->core_irq, chip);
+	if (chip->tsc_irq)
+		free_irq(chip->tsc_irq, chip);
+	mfd_remove_devices(chip->dev);
+}
+
+
+MODULE_DESCRIPTION("PMIC Driver for Maxim MAX8925");
+MODULE_AUTHOR("Haojian Zhuang <haojian.zhuang@marvell.com");
+MODULE_LICENSE("GPL");
diff --git a/drivers/mfd/max8925-i2c.c b/drivers/mfd/max8925-i2c.c
new file mode 100644
index 00000000000..c0b883c14f4
--- /dev/null
+++ b/drivers/mfd/max8925-i2c.c
@@ -0,0 +1,211 @@
+/*
+ * I2C driver for Maxim MAX8925
+ *
+ * Copyright (C) 2009 Marvell International Ltd.
+ *	Haojian Zhuang <haojian.zhuang@marvell.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/i2c.h>
+#include <linux/mfd/max8925.h>
+
+#define RTC_I2C_ADDR		0x68
+#define ADC_I2C_ADDR		0x47
+
+static inline int max8925_read_device(struct i2c_client *i2c,
+				      int reg, int bytes, void *dest)
+{
+	int ret;
+
+	if (bytes > 1)
+		ret = i2c_smbus_read_i2c_block_data(i2c, reg, bytes, dest);
+	else {
+		ret = i2c_smbus_read_byte_data(i2c, reg);
+		if (ret < 0)
+			return ret;
+		*(unsigned char *)dest = (unsigned char)ret;
+	}
+	return ret;
+}
+
+static inline int max8925_write_device(struct i2c_client *i2c,
+				       int reg, int bytes, void *src)
+{
+	unsigned char buf[bytes + 1];
+	int ret;
+
+	buf[0] = (unsigned char)reg;
+	memcpy(&buf[1], src, bytes);
+
+	ret = i2c_master_send(i2c, buf, bytes + 1);
+	if (ret < 0)
+		return ret;
+	return 0;
+}
+
+int max8925_reg_read(struct i2c_client *i2c, int reg)
+{
+	struct max8925_chip *chip = i2c_get_clientdata(i2c);
+	unsigned char data = 0;
+	int ret;
+
+	mutex_lock(&chip->io_lock);
+	ret = max8925_read_device(i2c, reg, 1, &data);
+	mutex_unlock(&chip->io_lock);
+
+	if (ret < 0)
+		return ret;
+	else
+		return (int)data;
+}
+EXPORT_SYMBOL(max8925_reg_read);
+
+int max8925_reg_write(struct i2c_client *i2c, int reg,
+		unsigned char data)
+{
+	struct max8925_chip *chip = i2c_get_clientdata(i2c);
+	int ret;
+
+	mutex_lock(&chip->io_lock);
+	ret = max8925_write_device(i2c, reg, 1, &data);
+	mutex_unlock(&chip->io_lock);
+
+	return ret;
+}
+EXPORT_SYMBOL(max8925_reg_write);
+
+int max8925_bulk_read(struct i2c_client *i2c, int reg,
+		int count, unsigned char *buf)
+{
+	struct max8925_chip *chip = i2c_get_clientdata(i2c);
+	int ret;
+
+	mutex_lock(&chip->io_lock);
+	ret = max8925_read_device(i2c, reg, count, buf);
+	mutex_unlock(&chip->io_lock);
+
+	return ret;
+}
+EXPORT_SYMBOL(max8925_bulk_read);
+
+int max8925_bulk_write(struct i2c_client *i2c, int reg,
+		int count, unsigned char *buf)
+{
+	struct max8925_chip *chip = i2c_get_clientdata(i2c);
+	int ret;
+
+	mutex_lock(&chip->io_lock);
+	ret = max8925_write_device(i2c, reg, count, buf);
+	mutex_unlock(&chip->io_lock);
+
+	return ret;
+}
+EXPORT_SYMBOL(max8925_bulk_write);
+
+int max8925_set_bits(struct i2c_client *i2c, int reg,
+		unsigned char mask, unsigned char data)
+{
+	struct max8925_chip *chip = i2c_get_clientdata(i2c);
+	unsigned char value;
+	int ret;
+
+	mutex_lock(&chip->io_lock);
+	ret = max8925_read_device(i2c, reg, 1, &value);
+	if (ret < 0)
+		goto out;
+	value &= ~mask;
+	value |= data;
+	ret = max8925_write_device(i2c, reg, 1, &value);
+out:
+	mutex_unlock(&chip->io_lock);
+	return ret;
+}
+EXPORT_SYMBOL(max8925_set_bits);
+
+
+static const struct i2c_device_id max8925_id_table[] = {
+	{ "max8925", 0 },
+	{ },
+};
+MODULE_DEVICE_TABLE(i2c, max8925_id_table);
+
+static int __devinit max8925_probe(struct i2c_client *client,
+				   const struct i2c_device_id *id)
+{
+	struct max8925_platform_data *pdata = client->dev.platform_data;
+	static struct max8925_chip *chip;
+
+	if (!pdata) {
+		pr_info("%s: platform data is missing\n", __func__);
+		return -EINVAL;
+	}
+
+	chip = kzalloc(sizeof(struct max8925_chip), GFP_KERNEL);
+	if (chip == NULL)
+		return -ENOMEM;
+	chip->i2c = client;
+	chip->dev = &client->dev;
+	i2c_set_clientdata(client, chip);
+	dev_set_drvdata(chip->dev, chip);
+	mutex_init(&chip->io_lock);
+
+	chip->rtc = i2c_new_dummy(chip->i2c->adapter, RTC_I2C_ADDR);
+	i2c_set_clientdata(chip->rtc, chip);
+
+	chip->adc = i2c_new_dummy(chip->i2c->adapter, ADC_I2C_ADDR);
+	i2c_set_clientdata(chip->adc, chip);
+
+	max8925_device_init(chip, pdata);
+
+	return 0;
+}
+
+static int __devexit max8925_remove(struct i2c_client *client)
+{
+	struct max8925_chip *chip = i2c_get_clientdata(client);
+
+	max8925_device_exit(chip);
+	i2c_unregister_device(chip->adc);
+	i2c_unregister_device(chip->rtc);
+	i2c_set_clientdata(chip->adc, NULL);
+	i2c_set_clientdata(chip->rtc, NULL);
+	i2c_set_clientdata(chip->i2c, NULL);
+	kfree(chip);
+	return 0;
+}
+
+static struct i2c_driver max8925_driver = {
+	.driver	= {
+		.name	= "max8925",
+		.owner	= THIS_MODULE,
+	},
+	.probe		= max8925_probe,
+	.remove		= __devexit_p(max8925_remove),
+	.id_table	= max8925_id_table,
+};
+
+static int __init max8925_i2c_init(void)
+{
+	int ret;
+
+	ret = i2c_add_driver(&max8925_driver);
+	if (ret != 0)
+		pr_err("Failed to register MAX8925 I2C driver: %d\n", ret);
+	return ret;
+}
+subsys_initcall(max8925_i2c_init);
+
+static void __exit max8925_i2c_exit(void)
+{
+	i2c_del_driver(&max8925_driver);
+}
+module_exit(max8925_i2c_exit);
+
+MODULE_DESCRIPTION("I2C Driver for Maxim 8925");
+MODULE_AUTHOR("Haojian Zhuang <haojian.zhuang@marvell.com>");
+MODULE_LICENSE("GPL");
diff --git a/drivers/mfd/mc13783-core.c b/drivers/mfd/mc13783-core.c
index 735c8a4d164..62a847e4c2d 100644
--- a/drivers/mfd/mc13783-core.c
+++ b/drivers/mfd/mc13783-core.c
@@ -225,7 +225,7 @@ int mc13783_reg_rmw(struct mc13783 *mc13783, unsigned int offset,
 }
 EXPORT_SYMBOL(mc13783_reg_rmw);
 
-int mc13783_mask(struct mc13783 *mc13783, int irq)
+int mc13783_irq_mask(struct mc13783 *mc13783, int irq)
 {
 	int ret;
 	unsigned int offmask = irq < 24 ? MC13783_IRQMASK0 : MC13783_IRQMASK1;
@@ -245,9 +245,9 @@ int mc13783_mask(struct mc13783 *mc13783, int irq)
 
 	return mc13783_reg_write(mc13783, offmask, mask | irqbit);
 }
-EXPORT_SYMBOL(mc13783_mask);
+EXPORT_SYMBOL(mc13783_irq_mask);
 
-int mc13783_unmask(struct mc13783 *mc13783, int irq)
+int mc13783_irq_unmask(struct mc13783 *mc13783, int irq)
 {
 	int ret;
 	unsigned int offmask = irq < 24 ? MC13783_IRQMASK0 : MC13783_IRQMASK1;
@@ -267,7 +267,53 @@ int mc13783_unmask(struct mc13783 *mc13783, int irq)
 
 	return mc13783_reg_write(mc13783, offmask, mask & ~irqbit);
 }
-EXPORT_SYMBOL(mc13783_unmask);
+EXPORT_SYMBOL(mc13783_irq_unmask);
+
+int mc13783_irq_status(struct mc13783 *mc13783, int irq,
+		int *enabled, int *pending)
+{
+	int ret;
+	unsigned int offmask = irq < 24 ? MC13783_IRQMASK0 : MC13783_IRQMASK1;
+	unsigned int offstat = irq < 24 ? MC13783_IRQSTAT0 : MC13783_IRQSTAT1;
+	u32 irqbit = 1 << (irq < 24 ? irq : irq - 24);
+
+	if (irq < 0 || irq >= MC13783_NUM_IRQ)
+		return -EINVAL;
+
+	if (enabled) {
+		u32 mask;
+
+		ret = mc13783_reg_read(mc13783, offmask, &mask);
+		if (ret)
+			return ret;
+
+		*enabled = mask & irqbit;
+	}
+
+	if (pending) {
+		u32 stat;
+
+		ret = mc13783_reg_read(mc13783, offstat, &stat);
+		if (ret)
+			return ret;
+
+		*pending = stat & irqbit;
+	}
+
+	return 0;
+}
+EXPORT_SYMBOL(mc13783_irq_status);
+
+int mc13783_irq_ack(struct mc13783 *mc13783, int irq)
+{
+	unsigned int offstat = irq < 24 ? MC13783_IRQSTAT0 : MC13783_IRQSTAT1;
+	unsigned int val = 1 << (irq < 24 ? irq : irq - 24);
+
+	BUG_ON(irq < 0 || irq >= MC13783_NUM_IRQ);
+
+	return mc13783_reg_write(mc13783, offstat, val);
+}
+EXPORT_SYMBOL(mc13783_irq_ack);
 
 int mc13783_irq_request_nounmask(struct mc13783 *mc13783, int irq,
 		irq_handler_t handler, const char *name, void *dev)
@@ -297,7 +343,7 @@ int mc13783_irq_request(struct mc13783 *mc13783, int irq,
 	if (ret)
 		return ret;
 
-	ret = mc13783_unmask(mc13783, irq);
+	ret = mc13783_irq_unmask(mc13783, irq);
 	if (ret) {
 		mc13783->irqhandler[irq] = NULL;
 		mc13783->irqdata[irq] = NULL;
@@ -317,7 +363,7 @@ int mc13783_irq_free(struct mc13783 *mc13783, int irq, void *dev)
 			mc13783->irqdata[irq] != dev)
 		return -EINVAL;
 
-	ret = mc13783_mask(mc13783, irq);
+	ret = mc13783_irq_mask(mc13783, irq);
 	if (ret)
 		return ret;
 
@@ -333,17 +379,6 @@ static inline irqreturn_t mc13783_irqhandler(struct mc13783 *mc13783, int irq)
 	return mc13783->irqhandler[irq](irq, mc13783->irqdata[irq]);
 }
 
-int mc13783_ackirq(struct mc13783 *mc13783, int irq)
-{
-	unsigned int offstat = irq < 24 ? MC13783_IRQSTAT0 : MC13783_IRQSTAT1;
-	unsigned int val = 1 << (irq < 24 ? irq : irq - 24);
-
-	BUG_ON(irq < 0 || irq >= MC13783_NUM_IRQ);
-
-	return mc13783_reg_write(mc13783, offstat, val);
-}
-EXPORT_SYMBOL(mc13783_ackirq);
-
 /*
  * returns: number of handled irqs or negative error
  * locking: holds mc13783->lock
@@ -422,7 +457,7 @@ static irqreturn_t mc13783_handler_adcdone(int irq, void *data)
 {
 	struct mc13783_adcdone_data *adcdone_data = data;
 
-	mc13783_ackirq(adcdone_data->mc13783, irq);
+	mc13783_irq_ack(adcdone_data->mc13783, irq);
 
 	complete_all(&adcdone_data->done);
 
@@ -486,7 +521,7 @@ int mc13783_adc_do_conversion(struct mc13783 *mc13783, unsigned int mode,
 	dev_dbg(&mc13783->spidev->dev, "%s: request irq\n", __func__);
 	mc13783_irq_request(mc13783, MC13783_IRQ_ADCDONE,
 			mc13783_handler_adcdone, __func__, &adcdone_data);
-	mc13783_ackirq(mc13783, MC13783_IRQ_ADCDONE);
+	mc13783_irq_ack(mc13783, MC13783_IRQ_ADCDONE);
 
 	mc13783_reg_write(mc13783, MC13783_REG_ADC_0, adc0);
 	mc13783_reg_write(mc13783, MC13783_REG_ADC_1, adc1);
diff --git a/drivers/mfd/mfd-core.c b/drivers/mfd/mfd-core.c
index ae15e495e20..aa17f4bddc5 100644
--- a/drivers/mfd/mfd-core.c
+++ b/drivers/mfd/mfd-core.c
@@ -13,6 +13,7 @@
 
 #include <linux/kernel.h>
 #include <linux/platform_device.h>
+#include <linux/acpi.h>
 #include <linux/mfd/core.h>
 
 static int mfd_add_device(struct device *parent, int id,
@@ -62,6 +63,10 @@ static int mfd_add_device(struct device *parent, int id,
 			res[r].start = cell->resources[r].start;
 			res[r].end   = cell->resources[r].end;
 		}
+
+		ret = acpi_check_resource_conflict(res);
+		if (ret)
+			goto fail_res;
 	}
 
 	platform_device_add_resources(pdev, res, cell->num_resources);
diff --git a/drivers/mfd/sh_mobile_sdhi.c b/drivers/mfd/sh_mobile_sdhi.c
index 03efae8041a..468fd366d4d 100644
--- a/drivers/mfd/sh_mobile_sdhi.c
+++ b/drivers/mfd/sh_mobile_sdhi.c
@@ -21,7 +21,7 @@
 #include <linux/kernel.h>
 #include <linux/clk.h>
 #include <linux/platform_device.h>
-
+#include <linux/mmc/host.h>
 #include <linux/mfd/core.h>
 #include <linux/mfd/tmio.h>
 #include <linux/mfd/sh_mobile_sdhi.h>
@@ -95,9 +95,9 @@ static int __init sh_mobile_sdhi_probe(struct platform_device *pdev)
 
 	clk_enable(priv->clk);
 
-	/* FIXME: silly const unsigned int hclk */
-	*(unsigned int *)&priv->mmc_data.hclk = clk_get_rate(priv->clk);
+	priv->mmc_data.hclk = clk_get_rate(priv->clk);
 	priv->mmc_data.set_pwr = sh_mobile_sdhi_set_pwr;
+	priv->mmc_data.capabilities = MMC_CAP_MMC_HIGHSPEED;
 
 	memcpy(&priv->cell_mmc, &sh_mobile_sdhi_cell, sizeof(priv->cell_mmc));
 	priv->cell_mmc.driver_data = &priv->mmc_data;
diff --git a/drivers/mfd/sm501.c b/drivers/mfd/sm501.c
index 0cc5eeff5ee..dc9ea95c056 100644
--- a/drivers/mfd/sm501.c
+++ b/drivers/mfd/sm501.c
@@ -1430,7 +1430,7 @@ static int __devinit sm501_plat_probe(struct platform_device *dev)
 	}
 
 	sm->regs_claim = request_mem_region(sm->io_res->start,
-					    0x100, "sm501");
+					    resource_size(sm->io_res), "sm501");
 
 	if (sm->regs_claim == NULL) {
 		dev_err(&dev->dev, "cannot claim registers\n");
@@ -1440,8 +1440,7 @@ static int __devinit sm501_plat_probe(struct platform_device *dev)
 
 	platform_set_drvdata(dev, sm);
 
-	sm->regs = ioremap(sm->io_res->start,
-			   (sm->io_res->end - sm->io_res->start) - 1);
+	sm->regs = ioremap(sm->io_res->start, resource_size(sm->io_res));
 
 	if (sm->regs == NULL) {
 		dev_err(&dev->dev, "cannot remap registers\n");
@@ -1645,7 +1644,7 @@ static int __devinit sm501_pci_probe(struct pci_dev *dev,
 	sm->mem_res = &dev->resource[0];
 
 	sm->regs_claim = request_mem_region(sm->io_res->start,
-					    0x100, "sm501");
+					    resource_size(sm->io_res), "sm501");
 	if (sm->regs_claim == NULL) {
 		dev_err(&dev->dev, "cannot claim registers\n");
 		err= -EBUSY;
diff --git a/drivers/mfd/t7l66xb.c b/drivers/mfd/t7l66xb.c
index bcf4687d4af..26d9176fca9 100644
--- a/drivers/mfd/t7l66xb.c
+++ b/drivers/mfd/t7l66xb.c
@@ -360,7 +360,7 @@ static int t7l66xb_probe(struct platform_device *dev)
 	if (ret)
 		goto err_request_scr;
 
-	t7l66xb->scr = ioremap(rscr->start, rscr->end - rscr->start + 1);
+	t7l66xb->scr = ioremap(rscr->start, resource_size(rscr));
 	if (!t7l66xb->scr) {
 		ret = -ENOMEM;
 		goto err_ioremap;
@@ -403,12 +403,12 @@ static int t7l66xb_probe(struct platform_device *dev)
 err_ioremap:
 	release_resource(&t7l66xb->rscr);
 err_request_scr:
-	kfree(t7l66xb);
 	clk_put(t7l66xb->clk48m);
 err_clk48m_get:
 	clk_put(t7l66xb->clk32k);
 err_clk32k_get:
 err_noirq:
+	kfree(t7l66xb);
 	return ret;
 }
 
diff --git a/drivers/mfd/tc6393xb.c b/drivers/mfd/tc6393xb.c
index 4bc5a08a2b0..c59e5c5737d 100644
--- a/drivers/mfd/tc6393xb.c
+++ b/drivers/mfd/tc6393xb.c
@@ -647,7 +647,7 @@ static int __devinit tc6393xb_probe(struct platform_device *dev)
 	if (ret)
 		goto err_request_scr;
 
-	tc6393xb->scr = ioremap(rscr->start, rscr->end - rscr->start + 1);
+	tc6393xb->scr = ioremap(rscr->start, resource_size(rscr));
 	if (!tc6393xb->scr) {
 		ret = -ENOMEM;
 		goto err_ioremap;
diff --git a/drivers/mfd/timberdale.c b/drivers/mfd/timberdale.c
new file mode 100644
index 00000000000..1ed44d28380
--- /dev/null
+++ b/drivers/mfd/timberdale.c
@@ -0,0 +1,727 @@
+/*
+ * timberdale.c timberdale FPGA MFD driver
+ * Copyright (c) 2009 Intel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+/* Supports:
+ * Timberdale FPGA
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/msi.h>
+#include <linux/mfd/core.h>
+
+#include <linux/timb_gpio.h>
+
+#include <linux/i2c.h>
+#include <linux/i2c-ocores.h>
+#include <linux/i2c/tsc2007.h>
+
+#include <linux/spi/spi.h>
+#include <linux/spi/xilinx_spi.h>
+#include <linux/spi/max7301.h>
+#include <linux/spi/mc33880.h>
+
+#include <media/timb_radio.h>
+
+#include "timberdale.h"
+
+#define DRIVER_NAME "timberdale"
+
+struct timberdale_device {
+	resource_size_t		ctl_mapbase;
+	unsigned char __iomem   *ctl_membase;
+	struct {
+		u32 major;
+		u32 minor;
+		u32 config;
+	} fw;
+};
+
+/*--------------------------------------------------------------------------*/
+
+static struct tsc2007_platform_data timberdale_tsc2007_platform_data = {
+	.model = 2003,
+	.x_plate_ohms = 100
+};
+
+static struct i2c_board_info timberdale_i2c_board_info[] = {
+	{
+		I2C_BOARD_INFO("tsc2007", 0x48),
+		.platform_data = &timberdale_tsc2007_platform_data,
+		.irq = IRQ_TIMBERDALE_TSC_INT
+	},
+};
+
+static __devinitdata struct ocores_i2c_platform_data
+timberdale_ocores_platform_data = {
+	.regstep = 4,
+	.clock_khz = 62500,
+	.devices = timberdale_i2c_board_info,
+	.num_devices = ARRAY_SIZE(timberdale_i2c_board_info)
+};
+
+const static __devinitconst struct resource timberdale_ocores_resources[] = {
+	{
+		.start	= OCORESOFFSET,
+		.end	= OCORESEND,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.start 	= IRQ_TIMBERDALE_I2C,
+		.end	= IRQ_TIMBERDALE_I2C,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+const struct max7301_platform_data timberdale_max7301_platform_data = {
+	.base = 200
+};
+
+const struct mc33880_platform_data timberdale_mc33880_platform_data = {
+	.base = 100
+};
+
+static struct spi_board_info timberdale_spi_16bit_board_info[] = {
+	{
+		.modalias = "max7301",
+		.max_speed_hz = 26000,
+		.chip_select = 2,
+		.mode = SPI_MODE_0,
+		.platform_data = &timberdale_max7301_platform_data
+	},
+};
+
+static struct spi_board_info timberdale_spi_8bit_board_info[] = {
+	{
+		.modalias = "mc33880",
+		.max_speed_hz = 4000,
+		.chip_select = 1,
+		.mode = SPI_MODE_1,
+		.platform_data = &timberdale_mc33880_platform_data
+	},
+};
+
+static __devinitdata struct xspi_platform_data timberdale_xspi_platform_data = {
+	.num_chipselect = 3,
+	.little_endian = true,
+	/* bits per word and devices will be filled in runtime depending
+	 * on the HW config
+	 */
+};
+
+const static __devinitconst struct resource timberdale_spi_resources[] = {
+	{
+		.start 	= SPIOFFSET,
+		.end	= SPIEND,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.start	= IRQ_TIMBERDALE_SPI,
+		.end	= IRQ_TIMBERDALE_SPI,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+const static __devinitconst struct resource timberdale_eth_resources[] = {
+	{
+		.start	= ETHOFFSET,
+		.end	= ETHEND,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.start	= IRQ_TIMBERDALE_ETHSW_IF,
+		.end	= IRQ_TIMBERDALE_ETHSW_IF,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static __devinitdata struct timbgpio_platform_data
+	timberdale_gpio_platform_data = {
+	.gpio_base = 0,
+	.nr_pins = GPIO_NR_PINS,
+	.irq_base = 200,
+};
+
+const static __devinitconst struct resource timberdale_gpio_resources[] = {
+	{
+		.start	= GPIOOFFSET,
+		.end	= GPIOEND,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.start	= IRQ_TIMBERDALE_GPIO,
+		.end	= IRQ_TIMBERDALE_GPIO,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+const static __devinitconst struct resource timberdale_mlogicore_resources[] = {
+	{
+		.start	= MLCOREOFFSET,
+		.end	= MLCOREEND,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.start	= IRQ_TIMBERDALE_MLCORE,
+		.end	= IRQ_TIMBERDALE_MLCORE,
+		.flags	= IORESOURCE_IRQ,
+	},
+	{
+		.start	= IRQ_TIMBERDALE_MLCORE_BUF,
+		.end	= IRQ_TIMBERDALE_MLCORE_BUF,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+const static __devinitconst struct resource timberdale_uart_resources[] = {
+	{
+		.start	= UARTOFFSET,
+		.end	= UARTEND,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.start	= IRQ_TIMBERDALE_UART,
+		.end	= IRQ_TIMBERDALE_UART,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+const static __devinitconst struct resource timberdale_uartlite_resources[] = {
+	{
+		.start	= UARTLITEOFFSET,
+		.end	= UARTLITEEND,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.start	= IRQ_TIMBERDALE_UARTLITE,
+		.end	= IRQ_TIMBERDALE_UARTLITE,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+const static __devinitconst struct resource timberdale_radio_resources[] = {
+	{
+		.start	= RDSOFFSET,
+		.end	= RDSEND,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.start	= IRQ_TIMBERDALE_RDS,
+		.end	= IRQ_TIMBERDALE_RDS,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static __devinitdata struct i2c_board_info timberdale_tef6868_i2c_board_info = {
+	I2C_BOARD_INFO("tef6862", 0x60)
+};
+
+static __devinitdata struct i2c_board_info timberdale_saa7706_i2c_board_info = {
+	I2C_BOARD_INFO("saa7706h", 0x1C)
+};
+
+static __devinitdata struct timb_radio_platform_data
+	timberdale_radio_platform_data = {
+	.i2c_adapter = 0,
+	.tuner = {
+		.module_name = "tef6862",
+		.info = &timberdale_tef6868_i2c_board_info
+	},
+	.dsp = {
+		.module_name = "saa7706h",
+		.info = &timberdale_saa7706_i2c_board_info
+	}
+};
+
+const static __devinitconst struct resource timberdale_dma_resources[] = {
+	{
+		.start	= DMAOFFSET,
+		.end	= DMAEND,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.start	= IRQ_TIMBERDALE_DMA,
+		.end	= IRQ_TIMBERDALE_DMA,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static __devinitdata struct mfd_cell timberdale_cells_bar0_cfg0[] = {
+	{
+		.name = "timb-uart",
+		.num_resources = ARRAY_SIZE(timberdale_uart_resources),
+		.resources = timberdale_uart_resources,
+	},
+	{
+		.name = "timb-gpio",
+		.num_resources = ARRAY_SIZE(timberdale_gpio_resources),
+		.resources = timberdale_gpio_resources,
+		.platform_data = &timberdale_gpio_platform_data,
+		.data_size = sizeof(timberdale_gpio_platform_data),
+	},
+	{
+		.name = "timb-radio",
+		.num_resources = ARRAY_SIZE(timberdale_radio_resources),
+		.resources = timberdale_radio_resources,
+		.platform_data = &timberdale_radio_platform_data,
+		.data_size = sizeof(timberdale_radio_platform_data),
+	},
+	{
+		.name = "xilinx_spi",
+		.num_resources = ARRAY_SIZE(timberdale_spi_resources),
+		.resources = timberdale_spi_resources,
+		.platform_data = &timberdale_xspi_platform_data,
+		.data_size = sizeof(timberdale_xspi_platform_data),
+	},
+	{
+		.name = "ks8842",
+		.num_resources = ARRAY_SIZE(timberdale_eth_resources),
+		.resources = timberdale_eth_resources,
+	},
+	{
+		.name = "timb-dma",
+		.num_resources = ARRAY_SIZE(timberdale_dma_resources),
+		.resources = timberdale_dma_resources,
+	},
+};
+
+static __devinitdata struct mfd_cell timberdale_cells_bar0_cfg1[] = {
+	{
+		.name = "timb-uart",
+		.num_resources = ARRAY_SIZE(timberdale_uart_resources),
+		.resources = timberdale_uart_resources,
+	},
+	{
+		.name = "uartlite",
+		.num_resources = ARRAY_SIZE(timberdale_uartlite_resources),
+		.resources = timberdale_uartlite_resources,
+	},
+	{
+		.name = "timb-gpio",
+		.num_resources = ARRAY_SIZE(timberdale_gpio_resources),
+		.resources = timberdale_gpio_resources,
+		.platform_data = &timberdale_gpio_platform_data,
+		.data_size = sizeof(timberdale_gpio_platform_data),
+	},
+	{
+		.name = "timb-mlogicore",
+		.num_resources = ARRAY_SIZE(timberdale_mlogicore_resources),
+		.resources = timberdale_mlogicore_resources,
+	},
+	{
+		.name = "timb-radio",
+		.num_resources = ARRAY_SIZE(timberdale_radio_resources),
+		.resources = timberdale_radio_resources,
+		.platform_data = &timberdale_radio_platform_data,
+		.data_size = sizeof(timberdale_radio_platform_data),
+	},
+	{
+		.name = "xilinx_spi",
+		.num_resources = ARRAY_SIZE(timberdale_spi_resources),
+		.resources = timberdale_spi_resources,
+		.platform_data = &timberdale_xspi_platform_data,
+		.data_size = sizeof(timberdale_xspi_platform_data),
+	},
+	{
+		.name = "ks8842",
+		.num_resources = ARRAY_SIZE(timberdale_eth_resources),
+		.resources = timberdale_eth_resources,
+	},
+	{
+		.name = "timb-dma",
+		.num_resources = ARRAY_SIZE(timberdale_dma_resources),
+		.resources = timberdale_dma_resources,
+	},
+};
+
+static __devinitdata struct mfd_cell timberdale_cells_bar0_cfg2[] = {
+	{
+		.name = "timb-uart",
+		.num_resources = ARRAY_SIZE(timberdale_uart_resources),
+		.resources = timberdale_uart_resources,
+	},
+	{
+		.name = "timb-gpio",
+		.num_resources = ARRAY_SIZE(timberdale_gpio_resources),
+		.resources = timberdale_gpio_resources,
+		.platform_data = &timberdale_gpio_platform_data,
+		.data_size = sizeof(timberdale_gpio_platform_data),
+	},
+	{
+		.name = "timb-radio",
+		.num_resources = ARRAY_SIZE(timberdale_radio_resources),
+		.resources = timberdale_radio_resources,
+		.platform_data = &timberdale_radio_platform_data,
+		.data_size = sizeof(timberdale_radio_platform_data),
+	},
+	{
+		.name = "xilinx_spi",
+		.num_resources = ARRAY_SIZE(timberdale_spi_resources),
+		.resources = timberdale_spi_resources,
+		.platform_data = &timberdale_xspi_platform_data,
+		.data_size = sizeof(timberdale_xspi_platform_data),
+	},
+	{
+		.name = "timb-dma",
+		.num_resources = ARRAY_SIZE(timberdale_dma_resources),
+		.resources = timberdale_dma_resources,
+	},
+};
+
+static __devinitdata struct mfd_cell timberdale_cells_bar0_cfg3[] = {
+	{
+		.name = "timb-uart",
+		.num_resources = ARRAY_SIZE(timberdale_uart_resources),
+		.resources = timberdale_uart_resources,
+	},
+	{
+		.name = "ocores-i2c",
+		.num_resources = ARRAY_SIZE(timberdale_ocores_resources),
+		.resources = timberdale_ocores_resources,
+		.platform_data = &timberdale_ocores_platform_data,
+		.data_size = sizeof(timberdale_ocores_platform_data),
+	},
+	{
+		.name = "timb-gpio",
+		.num_resources = ARRAY_SIZE(timberdale_gpio_resources),
+		.resources = timberdale_gpio_resources,
+		.platform_data = &timberdale_gpio_platform_data,
+		.data_size = sizeof(timberdale_gpio_platform_data),
+	},
+	{
+		.name = "timb-radio",
+		.num_resources = ARRAY_SIZE(timberdale_radio_resources),
+		.resources = timberdale_radio_resources,
+		.platform_data = &timberdale_radio_platform_data,
+		.data_size = sizeof(timberdale_radio_platform_data),
+	},
+	{
+		.name = "xilinx_spi",
+		.num_resources = ARRAY_SIZE(timberdale_spi_resources),
+		.resources = timberdale_spi_resources,
+		.platform_data = &timberdale_xspi_platform_data,
+		.data_size = sizeof(timberdale_xspi_platform_data),
+	},
+	{
+		.name = "ks8842",
+		.num_resources = ARRAY_SIZE(timberdale_eth_resources),
+		.resources = timberdale_eth_resources,
+	},
+	{
+		.name = "timb-dma",
+		.num_resources = ARRAY_SIZE(timberdale_dma_resources),
+		.resources = timberdale_dma_resources,
+	},
+};
+
+static const __devinitconst struct resource timberdale_sdhc_resources[] = {
+	/* located in bar 1 and bar 2 */
+	{
+		.start	= SDHC0OFFSET,
+		.end	= SDHC0END,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.start	= IRQ_TIMBERDALE_SDHC,
+		.end	= IRQ_TIMBERDALE_SDHC,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static __devinitdata struct mfd_cell timberdale_cells_bar1[] = {
+	{
+		.name = "sdhci",
+		.num_resources = ARRAY_SIZE(timberdale_sdhc_resources),
+		.resources = timberdale_sdhc_resources,
+	},
+};
+
+static __devinitdata struct mfd_cell timberdale_cells_bar2[] = {
+	{
+		.name = "sdhci",
+		.num_resources = ARRAY_SIZE(timberdale_sdhc_resources),
+		.resources = timberdale_sdhc_resources,
+	},
+};
+
+static ssize_t show_fw_ver(struct device *dev, struct device_attribute *attr,
+	char *buf)
+{
+	struct pci_dev *pdev = to_pci_dev(dev);
+	struct timberdale_device *priv = pci_get_drvdata(pdev);
+
+	return sprintf(buf, "%d.%d.%d\n", priv->fw.major, priv->fw.minor,
+		priv->fw.config);
+}
+
+static DEVICE_ATTR(fw_ver, S_IRUGO, show_fw_ver, NULL);
+
+/*--------------------------------------------------------------------------*/
+
+static int __devinit timb_probe(struct pci_dev *dev,
+	const struct pci_device_id *id)
+{
+	struct timberdale_device *priv;
+	int err, i;
+	resource_size_t mapbase;
+	struct msix_entry *msix_entries = NULL;
+	u8 ip_setup;
+
+	priv = kzalloc(sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	pci_set_drvdata(dev, priv);
+
+	err = pci_enable_device(dev);
+	if (err)
+		goto err_enable;
+
+	mapbase = pci_resource_start(dev, 0);
+	if (!mapbase) {
+		dev_err(&dev->dev, "No resource\n");
+		goto err_start;
+	}
+
+	/* create a resource for the PCI master register */
+	priv->ctl_mapbase = mapbase + CHIPCTLOFFSET;
+	if (!request_mem_region(priv->ctl_mapbase, CHIPCTLSIZE, "timb-ctl")) {
+		dev_err(&dev->dev, "Failed to request ctl mem\n");
+		goto err_request;
+	}
+
+	priv->ctl_membase = ioremap(priv->ctl_mapbase, CHIPCTLSIZE);
+	if (!priv->ctl_membase) {
+		dev_err(&dev->dev, "ioremap failed for ctl mem\n");
+		goto err_ioremap;
+	}
+
+	/* read the HW config */
+	priv->fw.major = ioread32(priv->ctl_membase + TIMB_REV_MAJOR);
+	priv->fw.minor = ioread32(priv->ctl_membase + TIMB_REV_MINOR);
+	priv->fw.config = ioread32(priv->ctl_membase + TIMB_HW_CONFIG);
+
+	if (priv->fw.major > TIMB_SUPPORTED_MAJOR) {
+		dev_err(&dev->dev, "The driver supports an older "
+			"version of the FPGA, please update the driver to "
+			"support %d.%d\n", priv->fw.major, priv->fw.minor);
+		goto err_ioremap;
+	}
+	if (priv->fw.major < TIMB_SUPPORTED_MAJOR ||
+		priv->fw.minor < TIMB_REQUIRED_MINOR) {
+		dev_err(&dev->dev, "The FPGA image is too old (%d.%d), "
+			"please upgrade the FPGA to at least: %d.%d\n",
+			priv->fw.major, priv->fw.minor,
+			TIMB_SUPPORTED_MAJOR, TIMB_REQUIRED_MINOR);
+		goto err_ioremap;
+	}
+
+	msix_entries = kzalloc(TIMBERDALE_NR_IRQS * sizeof(*msix_entries),
+		GFP_KERNEL);
+	if (!msix_entries)
+		goto err_ioremap;
+
+	for (i = 0; i < TIMBERDALE_NR_IRQS; i++)
+		msix_entries[i].entry = i;
+
+	err = pci_enable_msix(dev, msix_entries, TIMBERDALE_NR_IRQS);
+	if (err) {
+		dev_err(&dev->dev,
+			"MSI-X init failed: %d, expected entries: %d\n",
+			err, TIMBERDALE_NR_IRQS);
+		goto err_msix;
+	}
+
+	err = device_create_file(&dev->dev, &dev_attr_fw_ver);
+	if (err)
+		goto err_create_file;
+
+	/* Reset all FPGA PLB peripherals */
+	iowrite32(0x1, priv->ctl_membase + TIMB_SW_RST);
+
+	/* update IRQ offsets in I2C board info */
+	for (i = 0; i < ARRAY_SIZE(timberdale_i2c_board_info); i++)
+		timberdale_i2c_board_info[i].irq =
+			msix_entries[timberdale_i2c_board_info[i].irq].vector;
+
+	/* Update the SPI configuration depending on the HW (8 or 16 bit) */
+	if (priv->fw.config & TIMB_HW_CONFIG_SPI_8BIT) {
+		timberdale_xspi_platform_data.bits_per_word = 8;
+		timberdale_xspi_platform_data.devices =
+			timberdale_spi_8bit_board_info;
+		timberdale_xspi_platform_data.num_devices =
+			ARRAY_SIZE(timberdale_spi_8bit_board_info);
+	} else {
+		timberdale_xspi_platform_data.bits_per_word = 16;
+		timberdale_xspi_platform_data.devices =
+			timberdale_spi_16bit_board_info;
+		timberdale_xspi_platform_data.num_devices =
+			ARRAY_SIZE(timberdale_spi_16bit_board_info);
+	}
+
+	ip_setup = priv->fw.config & TIMB_HW_VER_MASK;
+	switch (ip_setup) {
+	case TIMB_HW_VER0:
+		err = mfd_add_devices(&dev->dev, -1,
+			timberdale_cells_bar0_cfg0,
+			ARRAY_SIZE(timberdale_cells_bar0_cfg0),
+			&dev->resource[0], msix_entries[0].vector);
+		break;
+	case TIMB_HW_VER1:
+		err = mfd_add_devices(&dev->dev, -1,
+			timberdale_cells_bar0_cfg1,
+			ARRAY_SIZE(timberdale_cells_bar0_cfg1),
+			&dev->resource[0], msix_entries[0].vector);
+		break;
+	case TIMB_HW_VER2:
+		err = mfd_add_devices(&dev->dev, -1,
+			timberdale_cells_bar0_cfg2,
+			ARRAY_SIZE(timberdale_cells_bar0_cfg2),
+			&dev->resource[0], msix_entries[0].vector);
+		break;
+	case TIMB_HW_VER3:
+		err = mfd_add_devices(&dev->dev, -1,
+			timberdale_cells_bar0_cfg3,
+			ARRAY_SIZE(timberdale_cells_bar0_cfg3),
+			&dev->resource[0], msix_entries[0].vector);
+		break;
+	default:
+		dev_err(&dev->dev, "Uknown IP setup: %d.%d.%d\n",
+			priv->fw.major, priv->fw.minor, ip_setup);
+		err = -ENODEV;
+		goto err_mfd;
+		break;
+	}
+
+	if (err) {
+		dev_err(&dev->dev, "mfd_add_devices failed: %d\n", err);
+		goto err_mfd;
+	}
+
+	err = mfd_add_devices(&dev->dev, 0,
+		timberdale_cells_bar1, ARRAY_SIZE(timberdale_cells_bar1),
+		&dev->resource[1], msix_entries[0].vector);
+	if (err) {
+		dev_err(&dev->dev, "mfd_add_devices failed: %d\n", err);
+		goto err_mfd2;
+	}
+
+	/* only version 0 and 3 have the iNand routed to SDHCI */
+	if (((priv->fw.config & TIMB_HW_VER_MASK) == TIMB_HW_VER0) ||
+		((priv->fw.config & TIMB_HW_VER_MASK) == TIMB_HW_VER3)) {
+		err = mfd_add_devices(&dev->dev, 1, timberdale_cells_bar2,
+			ARRAY_SIZE(timberdale_cells_bar2),
+			&dev->resource[2], msix_entries[0].vector);
+		if (err) {
+			dev_err(&dev->dev, "mfd_add_devices failed: %d\n", err);
+			goto err_mfd2;
+		}
+	}
+
+	kfree(msix_entries);
+
+	dev_info(&dev->dev,
+		"Found Timberdale Card. Rev: %d.%d, HW config: 0x%02x\n",
+		priv->fw.major, priv->fw.minor, priv->fw.config);
+
+	return 0;
+
+err_mfd2:
+	mfd_remove_devices(&dev->dev);
+err_mfd:
+	device_remove_file(&dev->dev, &dev_attr_fw_ver);
+err_create_file:
+	pci_disable_msix(dev);
+err_msix:
+	iounmap(priv->ctl_membase);
+err_ioremap:
+	release_mem_region(priv->ctl_mapbase, CHIPCTLSIZE);
+err_request:
+	pci_set_drvdata(dev, NULL);
+err_start:
+	pci_disable_device(dev);
+err_enable:
+	kfree(msix_entries);
+	kfree(priv);
+	pci_set_drvdata(dev, NULL);
+	return -ENODEV;
+}
+
+static void __devexit timb_remove(struct pci_dev *dev)
+{
+	struct timberdale_device *priv = pci_get_drvdata(dev);
+
+	mfd_remove_devices(&dev->dev);
+
+	device_remove_file(&dev->dev, &dev_attr_fw_ver);
+
+	iounmap(priv->ctl_membase);
+	release_mem_region(priv->ctl_mapbase, CHIPCTLSIZE);
+
+	pci_disable_msix(dev);
+	pci_disable_device(dev);
+	pci_set_drvdata(dev, NULL);
+	kfree(priv);
+}
+
+static struct pci_device_id timberdale_pci_tbl[] = {
+	{ PCI_DEVICE(PCI_VENDOR_ID_TIMB, PCI_DEVICE_ID_TIMB) },
+	{ 0 }
+};
+MODULE_DEVICE_TABLE(pci, timberdale_pci_tbl);
+
+static struct pci_driver timberdale_pci_driver = {
+	.name = DRIVER_NAME,
+	.id_table = timberdale_pci_tbl,
+	.probe = timb_probe,
+	.remove = __devexit_p(timb_remove),
+};
+
+static int __init timberdale_init(void)
+{
+	int err;
+
+	err = pci_register_driver(&timberdale_pci_driver);
+	if (err < 0) {
+		printk(KERN_ERR
+			"Failed to register PCI driver for %s device.\n",
+			timberdale_pci_driver.name);
+		return -ENODEV;
+	}
+
+	printk(KERN_INFO "Driver for %s has been successfully registered.\n",
+		timberdale_pci_driver.name);
+
+	return 0;
+}
+
+static void __exit timberdale_exit(void)
+{
+	pci_unregister_driver(&timberdale_pci_driver);
+
+	printk(KERN_INFO "Driver for %s has been successfully unregistered.\n",
+		timberdale_pci_driver.name);
+}
+
+module_init(timberdale_init);
+module_exit(timberdale_exit);
+
+MODULE_AUTHOR("Mocean Laboratories <info@mocean-labs.com>");
+MODULE_VERSION(DRV_VERSION);
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/mfd/timberdale.h b/drivers/mfd/timberdale.h
new file mode 100644
index 00000000000..8d27ffabc25
--- /dev/null
+++ b/drivers/mfd/timberdale.h
@@ -0,0 +1,130 @@
+/*
+ * timberdale.h timberdale FPGA MFD driver defines
+ * Copyright (c) 2009 Intel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+/* Supports:
+ * Timberdale FPGA
+ */
+
+#ifndef MFD_TIMBERDALE_H
+#define MFD_TIMBERDALE_H
+
+#define DRV_VERSION		"0.1"
+
+/* This driver only support versions >= 3.8 and < 4.0  */
+#define TIMB_SUPPORTED_MAJOR	3
+
+/* This driver only support minor >= 8 */
+#define TIMB_REQUIRED_MINOR	8
+
+/* Registers of the control area */
+#define TIMB_REV_MAJOR	0x00
+#define TIMB_REV_MINOR	0x04
+#define TIMB_HW_CONFIG	0x08
+#define TIMB_SW_RST	0x40
+
+/* bits in the TIMB_HW_CONFIG register */
+#define TIMB_HW_CONFIG_SPI_8BIT	0x80
+
+#define TIMB_HW_VER_MASK	0x0f
+#define TIMB_HW_VER0		0x00
+#define TIMB_HW_VER1		0x01
+#define TIMB_HW_VER2		0x02
+#define TIMB_HW_VER3		0x03
+
+#define OCORESOFFSET	0x0
+#define OCORESEND	0x1f
+
+#define SPIOFFSET	0x80
+#define SPIEND		0xff
+
+#define UARTLITEOFFSET	0x100
+#define UARTLITEEND	0x10f
+
+#define RDSOFFSET	0x180
+#define RDSEND		0x183
+
+#define ETHOFFSET	0x300
+#define ETHEND		0x3ff
+
+#define GPIOOFFSET	0x400
+#define GPIOEND		0x7ff
+
+#define CHIPCTLOFFSET	0x800
+#define CHIPCTLEND	0x8ff
+#define CHIPCTLSIZE	(CHIPCTLEND - CHIPCTLOFFSET)
+
+#define INTCOFFSET	0xc00
+#define INTCEND		0xfff
+#define INTCSIZE	(INTCEND - INTCOFFSET)
+
+#define MOSTOFFSET	0x1000
+#define MOSTEND		0x13ff
+
+#define UARTOFFSET	0x1400
+#define UARTEND		0x17ff
+
+#define XIICOFFSET	0x1800
+#define XIICEND		0x19ff
+
+#define I2SOFFSET	0x1C00
+#define I2SEND		0x1fff
+
+#define LOGIWOFFSET	0x30000
+#define LOGIWEND	0x37fff
+
+#define MLCOREOFFSET	0x40000
+#define MLCOREEND	0x43fff
+
+#define DMAOFFSET	0x01000000
+#define DMAEND		0x013fffff
+
+/* SDHC0 is placed in PCI bar 1 */
+#define SDHC0OFFSET	0x00
+#define SDHC0END	0xff
+
+/* SDHC1 is placed in PCI bar 2 */
+#define SDHC1OFFSET	0x00
+#define SDHC1END	0xff
+
+#define PCI_VENDOR_ID_TIMB	0x10ee
+#define PCI_DEVICE_ID_TIMB	0xa123
+
+#define IRQ_TIMBERDALE_INIC		0
+#define IRQ_TIMBERDALE_MLB		1
+#define IRQ_TIMBERDALE_GPIO		2
+#define IRQ_TIMBERDALE_I2C		3
+#define IRQ_TIMBERDALE_UART		4
+#define IRQ_TIMBERDALE_DMA		5
+#define IRQ_TIMBERDALE_I2S		6
+#define IRQ_TIMBERDALE_TSC_INT		7
+#define IRQ_TIMBERDALE_SDHC		8
+#define IRQ_TIMBERDALE_ADV7180		9
+#define IRQ_TIMBERDALE_ETHSW_IF		10
+#define IRQ_TIMBERDALE_SPI		11
+#define IRQ_TIMBERDALE_UARTLITE		12
+#define IRQ_TIMBERDALE_MLCORE		13
+#define IRQ_TIMBERDALE_MLCORE_BUF	14
+#define IRQ_TIMBERDALE_RDS		15
+#define TIMBERDALE_NR_IRQS		16
+
+#define GPIO_PIN_ASCB		8
+#define GPIO_PIN_INIC_RST	14
+#define GPIO_PIN_BT_RST		15
+#define GPIO_NR_PINS		16
+
+#endif
diff --git a/drivers/mfd/twl-core.c b/drivers/mfd/twl-core.c
index 2a760653419..562cd4935e1 100644
--- a/drivers/mfd/twl-core.c
+++ b/drivers/mfd/twl-core.c
@@ -58,13 +58,6 @@
 
 #define DRIVER_NAME			"twl"
 
-#if defined(CONFIG_TWL4030_BCI_BATTERY) || \
-	defined(CONFIG_TWL4030_BCI_BATTERY_MODULE)
-#define twl_has_bci()		true
-#else
-#define twl_has_bci()		false
-#endif
-
 #if defined(CONFIG_KEYBOARD_TWL4030) || defined(CONFIG_KEYBOARD_TWL4030_MODULE)
 #define twl_has_keypad()	true
 #else
@@ -115,7 +108,8 @@
 #define twl_has_watchdog()        false
 #endif
 
-#if defined(CONFIG_TWL4030_CODEC) || defined(CONFIG_TWL4030_CODEC_MODULE)
+#if defined(CONFIG_TWL4030_CODEC) || defined(CONFIG_TWL4030_CODEC_MODULE) ||\
+	defined(CONFIG_SND_SOC_TWL6030) || defined(CONFIG_SND_SOC_TWL6030_MODULE)
 #define twl_has_codec()	true
 #else
 #define twl_has_codec()	false
@@ -129,7 +123,7 @@
 #define TWL_NUM_SLAVES		4
 
 #if defined(CONFIG_INPUT_TWL4030_PWRBUTTON) \
-	|| defined(CONFIG_INPUT_TWL4030_PWBUTTON_MODULE)
+	|| defined(CONFIG_INPUT_TWL4030_PWRBUTTON_MODULE)
 #define twl_has_pwrbutton()	true
 #else
 #define twl_has_pwrbutton()	false
@@ -204,6 +198,7 @@
 /* subchip/slave 3 0x4B - AUDIO */
 #define TWL6030_BASEADD_AUDIO		0x0000
 #define TWL6030_BASEADD_RSV		0x0000
+#define TWL6030_BASEADD_ZERO		0x0000
 
 /* Few power values */
 #define R_CFG_BOOT			0x05
@@ -319,9 +314,11 @@ static struct twl_mapping twl6030_map[] = {
 	{ SUB_CHIP_ID1, TWL6030_BASEADD_CHARGER },
 	{ SUB_CHIP_ID1, TWL6030_BASEADD_GASGAUGE },
 	{ SUB_CHIP_ID1, TWL6030_BASEADD_PWM },
-	{ SUB_CHIP_ID2, TWL6030_BASEADD_RSV },
-	{ SUB_CHIP_ID2, TWL6030_BASEADD_RSV },
+	{ SUB_CHIP_ID0, TWL6030_BASEADD_ZERO },
+	{ SUB_CHIP_ID1, TWL6030_BASEADD_ZERO },
 
+	{ SUB_CHIP_ID2, TWL6030_BASEADD_ZERO },
+	{ SUB_CHIP_ID2, TWL6030_BASEADD_ZERO },
 	{ SUB_CHIP_ID2, TWL6030_BASEADD_RSV },
 	{ SUB_CHIP_ID2, TWL6030_BASEADD_RSV },
 	{ SUB_CHIP_ID2, TWL6030_BASEADD_RSV },
@@ -587,18 +584,6 @@ add_children(struct twl4030_platform_data *pdata, unsigned long features)
 	struct device	*child;
 	unsigned sub_chip_id;
 
-	if (twl_has_bci() && pdata->bci &&
-	    !(features & (TPS_SUBSET | TWL5031))) {
-		child = add_child(3, "twl4030_bci",
-				pdata->bci, sizeof(*pdata->bci),
-				false,
-				/* irq0 = CHG_PRES, irq1 = BCI */
-				pdata->irq_base + BCI_PRES_INTR_OFFSET,
-				pdata->irq_base + BCI_INTR_OFFSET);
-		if (IS_ERR(child))
-			return PTR_ERR(child);
-	}
-
 	if (twl_has_gpio() && pdata->gpio) {
 		child = add_child(SUB_CHIP_ID1, "twl4030_gpio",
 				pdata->gpio, sizeof(*pdata->gpio),
@@ -711,8 +696,19 @@ add_children(struct twl4030_platform_data *pdata, unsigned long features)
 			return PTR_ERR(child);
 	}
 
-	if (twl_has_codec() && pdata->codec) {
-		child = add_child(1, "twl4030_codec",
+	if (twl_has_codec() && pdata->codec && twl_class_is_4030()) {
+		sub_chip_id = twl_map[TWL_MODULE_AUDIO_VOICE].sid;
+		child = add_child(sub_chip_id, "twl4030_codec",
+				pdata->codec, sizeof(*pdata->codec),
+				false, 0, 0);
+		if (IS_ERR(child))
+			return PTR_ERR(child);
+	}
+
+	/* Phoenix*/
+	if (twl_has_codec() && pdata->codec && twl_class_is_6030()) {
+		sub_chip_id = twl_map[TWL_MODULE_AUDIO_VOICE].sid;
+		child = add_child(sub_chip_id, "twl6030_codec",
 				pdata->codec, sizeof(*pdata->codec),
 				false, 0, 0);
 		if (IS_ERR(child))
@@ -965,6 +961,7 @@ twl_probe(struct i2c_client *client, const struct i2c_device_id *id)
 	int				status;
 	unsigned			i;
 	struct twl4030_platform_data	*pdata = client->dev.platform_data;
+	u8 temp;
 
 	if (!pdata) {
 		dev_dbg(&client->dev, "no platform data?\n");
@@ -1032,6 +1029,18 @@ twl_probe(struct i2c_client *client, const struct i2c_device_id *id)
 			goto fail;
 	}
 
+	/* Disable TWL4030/TWL5030 I2C Pull-up on I2C1 and I2C4(SR) interface.
+	 * Program I2C_SCL_CTRL_PU(bit 0)=0, I2C_SDA_CTRL_PU (bit 2)=0,
+	 * SR_I2C_SCL_CTRL_PU(bit 4)=0 and SR_I2C_SDA_CTRL_PU(bit 6)=0.
+	 */
+
+	if (twl_class_is_4030()) {
+		twl_i2c_read_u8(TWL4030_MODULE_INTBR, &temp, REG_GPPUPDCTR1);
+		temp &= ~(SR_I2C_SDA_CTRL_PU | SR_I2C_SCL_CTRL_PU | \
+		I2C_SDA_CTRL_PU | I2C_SCL_CTRL_PU);
+		twl_i2c_write_u8(TWL4030_MODULE_INTBR, temp, REG_GPPUPDCTR1);
+	}
+
 	status = add_children(pdata, id->driver_data);
 fail:
 	if (status < 0)
diff --git a/drivers/mfd/twl4030-power.c b/drivers/mfd/twl4030-power.c
index 0815292fdaf..7efa8789a3a 100644
--- a/drivers/mfd/twl4030-power.c
+++ b/drivers/mfd/twl4030-power.c
@@ -405,7 +405,7 @@ static int __init twl4030_configure_resource(struct twl4030_resconfig *rconfig)
 
 	if (rconfig->remap_sleep != TWL4030_RESCONFIG_UNDEF) {
 		remap &= ~SLEEP_STATE_MASK;
-		remap |= rconfig->remap_off << SLEEP_STATE_SHIFT;
+		remap |= rconfig->remap_sleep << SLEEP_STATE_SHIFT;
 	}
 
 	err = twl_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER,
@@ -461,6 +461,56 @@ out:
 	return err;
 }
 
+int twl4030_remove_script(u8 flags)
+{
+	int err = 0;
+
+	err = twl_i2c_write_u8(TWL4030_MODULE_PM_MASTER, R_KEY_1,
+			R_PROTECT_KEY);
+	if (err) {
+		pr_err("twl4030: unable to unlock PROTECT_KEY\n");
+		return err;
+	}
+
+	err = twl_i2c_write_u8(TWL4030_MODULE_PM_MASTER, R_KEY_2,
+			R_PROTECT_KEY);
+	if (err) {
+		pr_err("twl4030: unable to unlock PROTECT_KEY\n");
+		return err;
+	}
+
+	if (flags & TWL4030_WRST_SCRIPT) {
+		err = twl_i2c_write_u8(TWL4030_MODULE_PM_MASTER, END_OF_SCRIPT,
+				R_SEQ_ADD_WARM);
+		if (err)
+			return err;
+	}
+	if (flags & TWL4030_WAKEUP12_SCRIPT) {
+		if (err)
+		err = twl_i2c_write_u8(TWL4030_MODULE_PM_MASTER, END_OF_SCRIPT,
+				R_SEQ_ADD_S2A12);
+			return err;
+	}
+	if (flags & TWL4030_WAKEUP3_SCRIPT) {
+		err = twl_i2c_write_u8(TWL4030_MODULE_PM_MASTER, END_OF_SCRIPT,
+				R_SEQ_ADD_S2A3);
+		if (err)
+			return err;
+	}
+	if (flags & TWL4030_SLEEP_SCRIPT) {
+		err = twl_i2c_write_u8(TWL4030_MODULE_PM_MASTER, END_OF_SCRIPT,
+				R_SEQ_ADD_A2S);
+		if (err)
+			return err;
+	}
+
+	err = twl_i2c_write_u8(TWL4030_MODULE_PM_MASTER, 0, R_PROTECT_KEY);
+	if (err)
+		pr_err("TWL4030 Unable to relock registers\n");
+
+	return err;
+}
+
 void __init twl4030_power_init(struct twl4030_power_data *twl4030_scripts)
 {
 	int err = 0;
diff --git a/drivers/mfd/ucb1x00-core.c b/drivers/mfd/ucb1x00-core.c
index 252b74188ec..b281217334e 100644
--- a/drivers/mfd/ucb1x00-core.c
+++ b/drivers/mfd/ucb1x00-core.c
@@ -27,6 +27,7 @@
 #include <linux/mutex.h>
 #include <linux/mfd/ucb1x00.h>
 #include <linux/gpio.h>
+#include <linux/semaphore.h>
 
 #include <mach/dma.h>
 #include <mach/hardware.h>
diff --git a/drivers/mfd/wm831x-core.c b/drivers/mfd/wm831x-core.c
index 4b2021af1d9..07101e9e1cb 100644
--- a/drivers/mfd/wm831x-core.c
+++ b/drivers/mfd/wm831x-core.c
@@ -321,7 +321,6 @@ EXPORT_SYMBOL_GPL(wm831x_set_bits);
  */
 int wm831x_auxadc_read(struct wm831x *wm831x, enum wm831x_auxadc input)
 {
-	int tries = 10;
 	int ret, src;
 
 	mutex_lock(&wm831x->auxadc_lock);
@@ -349,13 +348,14 @@ int wm831x_auxadc_read(struct wm831x *wm831x, enum wm831x_auxadc input)
 		goto disable;
 	}
 
-	do {
-		msleep(1);
+	/* Ignore the result to allow us to soldier on without IRQ hookup */
+	wait_for_completion_timeout(&wm831x->auxadc_done, msecs_to_jiffies(5));
 
-		ret = wm831x_reg_read(wm831x, WM831X_AUXADC_CONTROL);
-		if (ret < 0)
-			ret = WM831X_AUX_CVT_ENA;
-	} while ((ret & WM831X_AUX_CVT_ENA) && --tries);
+	ret = wm831x_reg_read(wm831x, WM831X_AUXADC_CONTROL);
+	if (ret < 0) {
+		dev_err(wm831x->dev, "AUXADC status read failed: %d\n", ret);
+		goto disable;
+	}
 
 	if (ret & WM831X_AUX_CVT_ENA) {
 		dev_err(wm831x->dev, "Timed out reading AUXADC\n");
@@ -390,6 +390,15 @@ out:
 }
 EXPORT_SYMBOL_GPL(wm831x_auxadc_read);
 
+static irqreturn_t wm831x_auxadc_irq(int irq, void *irq_data)
+{
+	struct wm831x *wm831x = irq_data;
+
+	complete(&wm831x->auxadc_done);
+
+	return IRQ_HANDLED;
+}
+
 /**
  * wm831x_auxadc_read_uv: Read a voltage from the WM831x AUXADC
  *
@@ -1411,6 +1420,7 @@ static int wm831x_device_init(struct wm831x *wm831x, unsigned long id, int irq)
 	mutex_init(&wm831x->io_lock);
 	mutex_init(&wm831x->key_lock);
 	mutex_init(&wm831x->auxadc_lock);
+	init_completion(&wm831x->auxadc_done);
 	dev_set_drvdata(wm831x->dev, wm831x);
 
 	ret = wm831x_reg_read(wm831x, WM831X_PARENT_ID);
@@ -1449,18 +1459,33 @@ static int wm831x_device_init(struct wm831x *wm831x, unsigned long id, int irq)
 	case WM8310:
 		parent = WM8310;
 		wm831x->num_gpio = 16;
+		if (rev > 0) {
+			wm831x->has_gpio_ena = 1;
+			wm831x->has_cs_sts = 1;
+		}
+
 		dev_info(wm831x->dev, "WM8310 revision %c\n", 'A' + rev);
 		break;
 
 	case WM8311:
 		parent = WM8311;
 		wm831x->num_gpio = 16;
+		if (rev > 0) {
+			wm831x->has_gpio_ena = 1;
+			wm831x->has_cs_sts = 1;
+		}
+
 		dev_info(wm831x->dev, "WM8311 revision %c\n", 'A' + rev);
 		break;
 
 	case WM8312:
 		parent = WM8312;
 		wm831x->num_gpio = 16;
+		if (rev > 0) {
+			wm831x->has_gpio_ena = 1;
+			wm831x->has_cs_sts = 1;
+		}
+
 		dev_info(wm831x->dev, "WM8312 revision %c\n", 'A' + rev);
 		break;
 
@@ -1508,6 +1533,16 @@ static int wm831x_device_init(struct wm831x *wm831x, unsigned long id, int irq)
 	if (ret != 0)
 		goto err;
 
+	if (wm831x->irq_base) {
+		ret = request_threaded_irq(wm831x->irq_base +
+					   WM831X_IRQ_AUXADC_DATA,
+					   NULL, wm831x_auxadc_irq, 0,
+					   "auxadc", wm831x);
+		if (ret < 0)
+			dev_err(wm831x->dev, "AUXADC IRQ request failed: %d\n",
+				ret);
+	}
+
 	/* The core device is up, instantiate the subdevices. */
 	switch (parent) {
 	case WM8310:
@@ -1578,6 +1613,8 @@ static void wm831x_device_exit(struct wm831x *wm831x)
 {
 	wm831x_otp_exit(wm831x);
 	mfd_remove_devices(wm831x->dev);
+	if (wm831x->irq_base)
+		free_irq(wm831x->irq_base + WM831X_IRQ_AUXADC_DATA, wm831x);
 	wm831x_irq_exit(wm831x);
 	kfree(wm831x);
 }
diff --git a/drivers/mfd/wm8350-core.c b/drivers/mfd/wm8350-core.c
index 9a970bd6877..bd75807d530 100644
--- a/drivers/mfd/wm8350-core.c
+++ b/drivers/mfd/wm8350-core.c
@@ -339,7 +339,6 @@ EXPORT_SYMBOL_GPL(wm8350_reg_unlock);
 int wm8350_read_auxadc(struct wm8350 *wm8350, int channel, int scale, int vref)
 {
 	u16 reg, result = 0;
-	int tries = 5;
 
 	if (channel < WM8350_AUXADC_AUX1 || channel > WM8350_AUXADC_TEMP)
 		return -EINVAL;
@@ -363,12 +362,13 @@ int wm8350_read_auxadc(struct wm8350 *wm8350, int channel, int scale, int vref)
 	reg |= 1 << channel | WM8350_AUXADC_POLL;
 	wm8350_reg_write(wm8350, WM8350_DIGITISER_CONTROL_1, reg);
 
-	do {
-		schedule_timeout_interruptible(1);
-		reg = wm8350_reg_read(wm8350, WM8350_DIGITISER_CONTROL_1);
-	} while ((reg & WM8350_AUXADC_POLL) && --tries);
+	/* We ignore the result of the completion and just check for a
+	 * conversion result, allowing us to soldier on if the IRQ
+	 * infrastructure is not set up for the chip. */
+	wait_for_completion_timeout(&wm8350->auxadc_done, msecs_to_jiffies(5));
 
-	if (!tries)
+	reg = wm8350_reg_read(wm8350, WM8350_DIGITISER_CONTROL_1);
+	if (reg & WM8350_AUXADC_POLL)
 		dev_err(wm8350->dev, "adc chn %d read timeout\n", channel);
 	else
 		result = wm8350_reg_read(wm8350,
@@ -385,6 +385,15 @@ int wm8350_read_auxadc(struct wm8350 *wm8350, int channel, int scale, int vref)
 }
 EXPORT_SYMBOL_GPL(wm8350_read_auxadc);
 
+static irqreturn_t wm8350_auxadc_irq(int irq, void *irq_data)
+{
+	struct wm8350 *wm8350 = irq_data;
+
+	complete(&wm8350->auxadc_done);
+
+	return IRQ_HANDLED;
+}
+
 /*
  * Cache is always host endian.
  */
@@ -682,11 +691,22 @@ int wm8350_device_init(struct wm8350 *wm8350, int irq,
 	}
 
 	mutex_init(&wm8350->auxadc_mutex);
+	init_completion(&wm8350->auxadc_done);
 
 	ret = wm8350_irq_init(wm8350, irq, pdata);
 	if (ret < 0)
 		goto err;
 
+	if (wm8350->irq_base) {
+		ret = request_threaded_irq(wm8350->irq_base +
+					   WM8350_IRQ_AUXADC_DATARDY,
+					   NULL, wm8350_auxadc_irq, 0,
+					   "auxadc", wm8350);
+		if (ret < 0)
+			dev_warn(wm8350->dev,
+				 "Failed to request AUXADC IRQ: %d\n", ret);
+	}
+
 	if (pdata && pdata->init) {
 		ret = pdata->init(wm8350);
 		if (ret != 0) {
@@ -736,6 +756,9 @@ void wm8350_device_exit(struct wm8350 *wm8350)
 	platform_device_unregister(wm8350->gpio.pdev);
 	platform_device_unregister(wm8350->codec.pdev);
 
+	if (wm8350->irq_base)
+		free_irq(wm8350->irq_base + WM8350_IRQ_AUXADC_DATARDY, wm8350);
+
 	wm8350_irq_exit(wm8350);
 
 	kfree(wm8350->reg_cache);
diff --git a/drivers/mfd/wm8350-irq.c b/drivers/mfd/wm8350-irq.c
index 9025f29e270..f56c9adf949 100644
--- a/drivers/mfd/wm8350-irq.c
+++ b/drivers/mfd/wm8350-irq.c
@@ -18,7 +18,7 @@
 #include <linux/bug.h>
 #include <linux/device.h>
 #include <linux/interrupt.h>
-#include <linux/workqueue.h>
+#include <linux/irq.h>
 
 #include <linux/mfd/wm8350/core.h>
 #include <linux/mfd/wm8350/audio.h>
@@ -29,8 +29,6 @@
 #include <linux/mfd/wm8350/supply.h>
 #include <linux/mfd/wm8350/wdt.h>
 
-#define WM8350_NUM_IRQ_REGS 7
-
 #define WM8350_INT_OFFSET_1                     0
 #define WM8350_INT_OFFSET_2                     1
 #define WM8350_POWER_UP_INT_OFFSET              2
@@ -366,19 +364,10 @@ static struct wm8350_irq_data wm8350_irqs[] = {
 	},
 };
 
-static void wm8350_irq_call_handler(struct wm8350 *wm8350, int irq)
+static inline struct wm8350_irq_data *irq_to_wm8350_irq(struct wm8350 *wm8350,
+							int irq)
 {
-	mutex_lock(&wm8350->irq_mutex);
-
-	if (wm8350->irq[irq].handler)
-		wm8350->irq[irq].handler(irq, wm8350->irq[irq].data);
-	else {
-		dev_err(wm8350->dev, "irq %d nobody cared. now masked.\n",
-			irq);
-		wm8350_mask_irq(wm8350, irq);
-	}
-
-	mutex_unlock(&wm8350->irq_mutex);
+	return &wm8350_irqs[irq - wm8350->irq_base];
 }
 
 /*
@@ -386,7 +375,9 @@ static void wm8350_irq_call_handler(struct wm8350 *wm8350, int irq)
  * interrupts are clear on read the IRQ line will be reasserted and
  * the physical IRQ will be handled again if another interrupt is
  * asserted while we run - in the normal course of events this is a
- * rare occurrence so we save I2C/SPI reads.
+ * rare occurrence so we save I2C/SPI reads.  We're also assuming that
+ * it's rare to get lots of interrupts firing simultaneously so try to
+ * minimise I/O.
  */
 static irqreturn_t wm8350_irq(int irq, void *irq_data)
 {
@@ -397,7 +388,6 @@ static irqreturn_t wm8350_irq(int irq, void *irq_data)
 	struct wm8350_irq_data *data;
 	int i;
 
-	/* TODO: Use block reads to improve performance? */
 	level_one = wm8350_reg_read(wm8350, WM8350_SYSTEM_INTERRUPTS)
 		& ~wm8350_reg_read(wm8350, WM8350_SYSTEM_INTERRUPTS_MASK);
 
@@ -416,93 +406,101 @@ static irqreturn_t wm8350_irq(int irq, void *irq_data)
 			sub_reg[data->reg] =
 				wm8350_reg_read(wm8350, WM8350_INT_STATUS_1 +
 						data->reg);
-			sub_reg[data->reg] &=
-				~wm8350_reg_read(wm8350,
-						 WM8350_INT_STATUS_1_MASK +
-						 data->reg);
+			sub_reg[data->reg] &= ~wm8350->irq_masks[data->reg];
 			read_done[data->reg] = 1;
 		}
 
 		if (sub_reg[data->reg] & data->mask)
-			wm8350_irq_call_handler(wm8350, i);
+			handle_nested_irq(wm8350->irq_base + i);
 	}
 
 	return IRQ_HANDLED;
 }
 
-int wm8350_register_irq(struct wm8350 *wm8350, int irq,
-			irq_handler_t handler, unsigned long flags,
-			const char *name, void *data)
+static void wm8350_irq_lock(unsigned int irq)
 {
-	if (irq < 0 || irq >= WM8350_NUM_IRQ || !handler)
-		return -EINVAL;
-
-	if (wm8350->irq[irq].handler)
-		return -EBUSY;
-
-	mutex_lock(&wm8350->irq_mutex);
-	wm8350->irq[irq].handler = handler;
-	wm8350->irq[irq].data = data;
-	mutex_unlock(&wm8350->irq_mutex);
-
-	wm8350_unmask_irq(wm8350, irq);
+	struct wm8350 *wm8350 = get_irq_chip_data(irq);
 
-	return 0;
+	mutex_lock(&wm8350->irq_lock);
 }
-EXPORT_SYMBOL_GPL(wm8350_register_irq);
 
-int wm8350_free_irq(struct wm8350 *wm8350, int irq)
+static void wm8350_irq_sync_unlock(unsigned int irq)
 {
-	if (irq < 0 || irq >= WM8350_NUM_IRQ)
-		return -EINVAL;
+	struct wm8350 *wm8350 = get_irq_chip_data(irq);
+	int i;
 
-	wm8350_mask_irq(wm8350, irq);
+	for (i = 0; i < ARRAY_SIZE(wm8350->irq_masks); i++) {
+		/* If there's been a change in the mask write it back
+		 * to the hardware. */
+		if (wm8350->irq_masks[i] !=
+		    wm8350->reg_cache[WM8350_INT_STATUS_1_MASK + i])
+			WARN_ON(wm8350_reg_write(wm8350,
+					 WM8350_INT_STATUS_1_MASK + i,
+						 wm8350->irq_masks[i]));
+	}
 
-	mutex_lock(&wm8350->irq_mutex);
-	wm8350->irq[irq].handler = NULL;
-	mutex_unlock(&wm8350->irq_mutex);
-	return 0;
+	mutex_unlock(&wm8350->irq_lock);
 }
-EXPORT_SYMBOL_GPL(wm8350_free_irq);
 
-int wm8350_mask_irq(struct wm8350 *wm8350, int irq)
+static void wm8350_irq_enable(unsigned int irq)
 {
-	return wm8350_set_bits(wm8350, WM8350_INT_STATUS_1_MASK +
-			       wm8350_irqs[irq].reg,
-			       wm8350_irqs[irq].mask);
+	struct wm8350 *wm8350 = get_irq_chip_data(irq);
+	struct wm8350_irq_data *irq_data = irq_to_wm8350_irq(wm8350, irq);
+
+	wm8350->irq_masks[irq_data->reg] &= ~irq_data->mask;
 }
-EXPORT_SYMBOL_GPL(wm8350_mask_irq);
 
-int wm8350_unmask_irq(struct wm8350 *wm8350, int irq)
+static void wm8350_irq_disable(unsigned int irq)
 {
-	return wm8350_clear_bits(wm8350, WM8350_INT_STATUS_1_MASK +
-				 wm8350_irqs[irq].reg,
-				 wm8350_irqs[irq].mask);
+	struct wm8350 *wm8350 = get_irq_chip_data(irq);
+	struct wm8350_irq_data *irq_data = irq_to_wm8350_irq(wm8350, irq);
+
+	wm8350->irq_masks[irq_data->reg] |= irq_data->mask;
 }
-EXPORT_SYMBOL_GPL(wm8350_unmask_irq);
+
+static struct irq_chip wm8350_irq_chip = {
+	.name = "wm8350",
+	.bus_lock = wm8350_irq_lock,
+	.bus_sync_unlock = wm8350_irq_sync_unlock,
+	.disable = wm8350_irq_disable,
+	.enable = wm8350_irq_enable,
+};
 
 int wm8350_irq_init(struct wm8350 *wm8350, int irq,
 		    struct wm8350_platform_data *pdata)
 {
-	int ret;
+	int ret, cur_irq, i;
 	int flags = IRQF_ONESHOT;
 
 	if (!irq) {
-		dev_err(wm8350->dev, "No IRQ configured\n");
-		return -EINVAL;
+		dev_warn(wm8350->dev, "No interrupt support, no core IRQ\n");
+		return 0;
+	}
+
+	if (!pdata || !pdata->irq_base) {
+		dev_warn(wm8350->dev, "No interrupt support, no IRQ base\n");
+		return 0;
 	}
 
+	/* Mask top level interrupts */
 	wm8350_reg_write(wm8350, WM8350_SYSTEM_INTERRUPTS_MASK, 0xFFFF);
-	wm8350_reg_write(wm8350, WM8350_INT_STATUS_1_MASK, 0xFFFF);
-	wm8350_reg_write(wm8350, WM8350_INT_STATUS_2_MASK, 0xFFFF);
-	wm8350_reg_write(wm8350, WM8350_UNDER_VOLTAGE_INT_STATUS_MASK, 0xFFFF);
-	wm8350_reg_write(wm8350, WM8350_GPIO_INT_STATUS_MASK, 0xFFFF);
-	wm8350_reg_write(wm8350, WM8350_COMPARATOR_INT_STATUS_MASK, 0xFFFF);
 
-	mutex_init(&wm8350->irq_mutex);
+	/* Mask all individual interrupts by default and cache the
+	 * masks.  We read the masks back since there are unwritable
+	 * bits in the mask registers. */
+	for (i = 0; i < ARRAY_SIZE(wm8350->irq_masks); i++) {
+		wm8350_reg_write(wm8350, WM8350_INT_STATUS_1_MASK + i,
+				 0xFFFF);
+		wm8350->irq_masks[i] =
+			wm8350_reg_read(wm8350,
+					WM8350_INT_STATUS_1_MASK + i);
+	}
+
+	mutex_init(&wm8350->irq_lock);
 	wm8350->chip_irq = irq;
+	wm8350->irq_base = pdata->irq_base;
 
-	if (pdata && pdata->irq_high) {
+	if (pdata->irq_high) {
 		flags |= IRQF_TRIGGER_HIGH;
 
 		wm8350_set_bits(wm8350, WM8350_SYSTEM_CONTROL_1,
@@ -514,11 +512,32 @@ int wm8350_irq_init(struct wm8350 *wm8350, int irq,
 				  WM8350_IRQ_POL);
 	}
 
+	/* Register with genirq */
+	for (cur_irq = wm8350->irq_base;
+	     cur_irq < ARRAY_SIZE(wm8350_irqs) + wm8350->irq_base;
+	     cur_irq++) {
+		set_irq_chip_data(cur_irq, wm8350);
+		set_irq_chip_and_handler(cur_irq, &wm8350_irq_chip,
+					 handle_edge_irq);
+		set_irq_nested_thread(cur_irq, 1);
+
+		/* ARM needs us to explicitly flag the IRQ as valid
+		 * and will set them noprobe when we do so. */
+#ifdef CONFIG_ARM
+		set_irq_flags(cur_irq, IRQF_VALID);
+#else
+		set_irq_noprobe(cur_irq);
+#endif
+	}
+
 	ret = request_threaded_irq(irq, NULL, wm8350_irq, flags,
 				   "wm8350", wm8350);
 	if (ret != 0)
 		dev_err(wm8350->dev, "Failed to request IRQ: %d\n", ret);
 
+	/* Allow interrupts to fire */
+	wm8350_reg_write(wm8350, WM8350_SYSTEM_INTERRUPTS_MASK, 0);
+
 	return ret;
 }
 
diff --git a/drivers/mfd/wm8994-core.c b/drivers/mfd/wm8994-core.c
new file mode 100644
index 00000000000..844e1c1b7d9
--- /dev/null
+++ b/drivers/mfd/wm8994-core.c
@@ -0,0 +1,537 @@
+/*
+ * wm8994-core.c  --  Device access for Wolfson WM8994
+ *
+ * Copyright 2009 Wolfson Microelectronics PLC.
+ *
+ * Author: Mark Brown <broonie@opensource.wolfsonmicro.com>
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/i2c.h>
+#include <linux/delay.h>
+#include <linux/mfd/core.h>
+#include <linux/regulator/consumer.h>
+#include <linux/regulator/machine.h>
+
+#include <linux/mfd/wm8994/core.h>
+#include <linux/mfd/wm8994/pdata.h>
+#include <linux/mfd/wm8994/registers.h>
+
+static int wm8994_read(struct wm8994 *wm8994, unsigned short reg,
+		       int bytes, void *dest)
+{
+	int ret, i;
+	u16 *buf = dest;
+
+	BUG_ON(bytes % 2);
+	BUG_ON(bytes <= 0);
+
+	ret = wm8994->read_dev(wm8994, reg, bytes, dest);
+	if (ret < 0)
+		return ret;
+
+	for (i = 0; i < bytes / 2; i++) {
+		buf[i] = be16_to_cpu(buf[i]);
+
+		dev_vdbg(wm8994->dev, "Read %04x from R%d(0x%x)\n",
+			 buf[i], reg + i, reg + i);
+	}
+
+	return 0;
+}
+
+/**
+ * wm8994_reg_read: Read a single WM8994 register.
+ *
+ * @wm8994: Device to read from.
+ * @reg: Register to read.
+ */
+int wm8994_reg_read(struct wm8994 *wm8994, unsigned short reg)
+{
+	unsigned short val;
+	int ret;
+
+	mutex_lock(&wm8994->io_lock);
+
+	ret = wm8994_read(wm8994, reg, 2, &val);
+
+	mutex_unlock(&wm8994->io_lock);
+
+	if (ret < 0)
+		return ret;
+	else
+		return val;
+}
+EXPORT_SYMBOL_GPL(wm8994_reg_read);
+
+/**
+ * wm8994_bulk_read: Read multiple WM8994 registers
+ *
+ * @wm8994: Device to read from
+ * @reg: First register
+ * @count: Number of registers
+ * @buf: Buffer to fill.
+ */
+int wm8994_bulk_read(struct wm8994 *wm8994, unsigned short reg,
+		     int count, u16 *buf)
+{
+	int ret;
+
+	mutex_lock(&wm8994->io_lock);
+
+	ret = wm8994_read(wm8994, reg, count * 2, buf);
+
+	mutex_unlock(&wm8994->io_lock);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(wm8994_bulk_read);
+
+static int wm8994_write(struct wm8994 *wm8994, unsigned short reg,
+			int bytes, void *src)
+{
+	u16 *buf = src;
+	int i;
+
+	BUG_ON(bytes % 2);
+	BUG_ON(bytes <= 0);
+
+	for (i = 0; i < bytes / 2; i++) {
+		dev_vdbg(wm8994->dev, "Write %04x to R%d(0x%x)\n",
+			 buf[i], reg + i, reg + i);
+
+		buf[i] = cpu_to_be16(buf[i]);
+	}
+
+	return wm8994->write_dev(wm8994, reg, bytes, src);
+}
+
+/**
+ * wm8994_reg_write: Write a single WM8994 register.
+ *
+ * @wm8994: Device to write to.
+ * @reg: Register to write to.
+ * @val: Value to write.
+ */
+int wm8994_reg_write(struct wm8994 *wm8994, unsigned short reg,
+		     unsigned short val)
+{
+	int ret;
+
+	mutex_lock(&wm8994->io_lock);
+
+	ret = wm8994_write(wm8994, reg, 2, &val);
+
+	mutex_unlock(&wm8994->io_lock);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(wm8994_reg_write);
+
+/**
+ * wm8994_set_bits: Set the value of a bitfield in a WM8994 register
+ *
+ * @wm8994: Device to write to.
+ * @reg: Register to write to.
+ * @mask: Mask of bits to set.
+ * @val: Value to set (unshifted)
+ */
+int wm8994_set_bits(struct wm8994 *wm8994, unsigned short reg,
+		    unsigned short mask, unsigned short val)
+{
+	int ret;
+	u16 r;
+
+	mutex_lock(&wm8994->io_lock);
+
+	ret = wm8994_read(wm8994, reg, 2, &r);
+	if (ret < 0)
+		goto out;
+
+	r &= ~mask;
+	r |= val;
+
+	ret = wm8994_write(wm8994, reg, 2, &r);
+
+out:
+	mutex_unlock(&wm8994->io_lock);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(wm8994_set_bits);
+
+static struct mfd_cell wm8994_regulator_devs[] = {
+	{ .name = "wm8994-ldo", .id = 1 },
+	{ .name = "wm8994-ldo", .id = 2 },
+};
+
+static struct mfd_cell wm8994_devs[] = {
+	{ .name = "wm8994-codec" },
+	{ .name = "wm8994-gpio" },
+};
+
+/*
+ * Supplies for the main bulk of CODEC; the LDO supplies are ignored
+ * and should be handled via the standard regulator API supply
+ * management.
+ */
+static const char *wm8994_main_supplies[] = {
+	"DBVDD",
+	"DCVDD",
+	"AVDD1",
+	"AVDD2",
+	"CPVDD",
+	"SPKVDD1",
+	"SPKVDD2",
+};
+
+#ifdef CONFIG_PM
+static int wm8994_device_suspend(struct device *dev)
+{
+	struct wm8994 *wm8994 = dev_get_drvdata(dev);
+	int ret;
+
+	/* GPIO configuration state is saved here since we may be configuring
+	 * the GPIO alternate functions even if we're not using the gpiolib
+	 * driver for them.
+	 */
+	ret = wm8994_read(wm8994, WM8994_GPIO_1, WM8994_NUM_GPIO_REGS * 2,
+			  &wm8994->gpio_regs);
+	if (ret < 0)
+		dev_err(dev, "Failed to save GPIO registers: %d\n", ret);
+
+	/* For similar reasons we also stash the regulator states */
+	ret = wm8994_read(wm8994, WM8994_LDO_1, WM8994_NUM_LDO_REGS * 2,
+			  &wm8994->ldo_regs);
+	if (ret < 0)
+		dev_err(dev, "Failed to save LDO registers: %d\n", ret);
+
+	ret = regulator_bulk_disable(ARRAY_SIZE(wm8994_main_supplies),
+				     wm8994->supplies);
+	if (ret != 0) {
+		dev_err(dev, "Failed to disable supplies: %d\n", ret);
+		return ret;
+	}
+
+	return 0;
+}
+
+static int wm8994_device_resume(struct device *dev)
+{
+	struct wm8994 *wm8994 = dev_get_drvdata(dev);
+	int ret;
+
+	ret = regulator_bulk_enable(ARRAY_SIZE(wm8994_main_supplies),
+				    wm8994->supplies);
+	if (ret != 0) {
+		dev_err(dev, "Failed to enable supplies: %d\n", ret);
+		return ret;
+	}
+
+	ret = wm8994_write(wm8994, WM8994_LDO_1, WM8994_NUM_LDO_REGS * 2,
+			   &wm8994->ldo_regs);
+	if (ret < 0)
+		dev_err(dev, "Failed to restore LDO registers: %d\n", ret);
+
+	ret = wm8994_write(wm8994, WM8994_GPIO_1, WM8994_NUM_GPIO_REGS * 2,
+			   &wm8994->gpio_regs);
+	if (ret < 0)
+		dev_err(dev, "Failed to restore GPIO registers: %d\n", ret);
+
+	return 0;
+}
+#endif
+
+#ifdef CONFIG_REGULATOR
+static int wm8994_ldo_in_use(struct wm8994_pdata *pdata, int ldo)
+{
+	struct wm8994_ldo_pdata *ldo_pdata;
+
+	if (!pdata)
+		return 0;
+
+	ldo_pdata = &pdata->ldo[ldo];
+
+	if (!ldo_pdata->init_data)
+		return 0;
+
+	return ldo_pdata->init_data->num_consumer_supplies != 0;
+}
+#else
+static int wm8994_ldo_in_use(struct wm8994_pdata *pdata, int ldo)
+{
+	return 0;
+}
+#endif
+
+/*
+ * Instantiate the generic non-control parts of the device.
+ */
+static int wm8994_device_init(struct wm8994 *wm8994, unsigned long id, int irq)
+{
+	struct wm8994_pdata *pdata = wm8994->dev->platform_data;
+	int ret, i;
+
+	mutex_init(&wm8994->io_lock);
+	dev_set_drvdata(wm8994->dev, wm8994);
+
+	/* Add the on-chip regulators first for bootstrapping */
+	ret = mfd_add_devices(wm8994->dev, -1,
+			      wm8994_regulator_devs,
+			      ARRAY_SIZE(wm8994_regulator_devs),
+			      NULL, 0);
+	if (ret != 0) {
+		dev_err(wm8994->dev, "Failed to add children: %d\n", ret);
+		goto err;
+	}
+
+	wm8994->supplies = kzalloc(sizeof(struct regulator_bulk_data) *
+				   ARRAY_SIZE(wm8994_main_supplies),
+				   GFP_KERNEL);
+	if (!wm8994->supplies)
+		goto err;
+
+	for (i = 0; i < ARRAY_SIZE(wm8994_main_supplies); i++)
+		wm8994->supplies[i].supply = wm8994_main_supplies[i];
+
+	ret = regulator_bulk_get(wm8994->dev, ARRAY_SIZE(wm8994_main_supplies),
+				 wm8994->supplies);
+	if (ret != 0) {
+		dev_err(wm8994->dev, "Failed to get supplies: %d\n", ret);
+		goto err_supplies;
+	}
+
+	ret = regulator_bulk_enable(ARRAY_SIZE(wm8994_main_supplies),
+				    wm8994->supplies);
+	if (ret != 0) {
+		dev_err(wm8994->dev, "Failed to enable supplies: %d\n", ret);
+		goto err_get;
+	}
+
+	ret = wm8994_reg_read(wm8994, WM8994_SOFTWARE_RESET);
+	if (ret < 0) {
+		dev_err(wm8994->dev, "Failed to read ID register\n");
+		goto err_enable;
+	}
+	if (ret != 0x8994) {
+		dev_err(wm8994->dev, "Device is not a WM8994, ID is %x\n",
+			ret);
+		ret = -EINVAL;
+		goto err_enable;
+	}
+
+	ret = wm8994_reg_read(wm8994, WM8994_CHIP_REVISION);
+	if (ret < 0) {
+		dev_err(wm8994->dev, "Failed to read revision register: %d\n",
+			ret);
+		goto err_enable;
+	}
+
+	switch (ret) {
+	case 0:
+	case 1:
+		dev_warn(wm8994->dev, "revision %c not fully supported\n",
+			'A' + ret);
+		break;
+	default:
+		dev_info(wm8994->dev, "revision %c\n", 'A' + ret);
+		break;
+	}
+
+
+	if (pdata) {
+		wm8994->gpio_base = pdata->gpio_base;
+
+		/* GPIO configuration is only applied if it's non-zero */
+		for (i = 0; i < ARRAY_SIZE(pdata->gpio_defaults); i++) {
+			if (pdata->gpio_defaults[i]) {
+				wm8994_set_bits(wm8994, WM8994_GPIO_1 + i,
+						0xffff,
+						pdata->gpio_defaults[i]);
+			}
+		}
+	}
+
+	/* In some system designs where the regulators are not in use,
+	 * we can achieve a small reduction in leakage currents by
+	 * floating LDO outputs.  This bit makes no difference if the
+	 * LDOs are enabled, it only affects cases where the LDOs were
+	 * in operation and are then disabled.
+	 */
+	for (i = 0; i < WM8994_NUM_LDO_REGS; i++) {
+		if (wm8994_ldo_in_use(pdata, i))
+			wm8994_set_bits(wm8994, WM8994_LDO_1 + i,
+					WM8994_LDO1_DISCH, WM8994_LDO1_DISCH);
+		else
+			wm8994_set_bits(wm8994, WM8994_LDO_1 + i,
+					WM8994_LDO1_DISCH, 0);
+	}
+
+	ret = mfd_add_devices(wm8994->dev, -1,
+			      wm8994_devs, ARRAY_SIZE(wm8994_devs),
+			      NULL, 0);
+	if (ret != 0) {
+		dev_err(wm8994->dev, "Failed to add children: %d\n", ret);
+		goto err_enable;
+	}
+
+	return 0;
+
+err_enable:
+	regulator_bulk_disable(ARRAY_SIZE(wm8994_main_supplies),
+			       wm8994->supplies);
+err_get:
+	regulator_bulk_free(ARRAY_SIZE(wm8994_main_supplies), wm8994->supplies);
+err_supplies:
+	kfree(wm8994->supplies);
+err:
+	mfd_remove_devices(wm8994->dev);
+	kfree(wm8994);
+	return ret;
+}
+
+static void wm8994_device_exit(struct wm8994 *wm8994)
+{
+	mfd_remove_devices(wm8994->dev);
+	regulator_bulk_disable(ARRAY_SIZE(wm8994_main_supplies),
+			       wm8994->supplies);
+	regulator_bulk_free(ARRAY_SIZE(wm8994_main_supplies), wm8994->supplies);
+	kfree(wm8994->supplies);
+	kfree(wm8994);
+}
+
+static int wm8994_i2c_read_device(struct wm8994 *wm8994, unsigned short reg,
+				  int bytes, void *dest)
+{
+	struct i2c_client *i2c = wm8994->control_data;
+	int ret;
+	u16 r = cpu_to_be16(reg);
+
+	ret = i2c_master_send(i2c, (unsigned char *)&r, 2);
+	if (ret < 0)
+		return ret;
+	if (ret != 2)
+		return -EIO;
+
+	ret = i2c_master_recv(i2c, dest, bytes);
+	if (ret < 0)
+		return ret;
+	if (ret != bytes)
+		return -EIO;
+	return 0;
+}
+
+/* Currently we allocate the write buffer on the stack; this is OK for
+ * small writes - if we need to do large writes this will need to be
+ * revised.
+ */
+static int wm8994_i2c_write_device(struct wm8994 *wm8994, unsigned short reg,
+				   int bytes, void *src)
+{
+	struct i2c_client *i2c = wm8994->control_data;
+	unsigned char msg[bytes + 2];
+	int ret;
+
+	reg = cpu_to_be16(reg);
+	memcpy(&msg[0], &reg, 2);
+	memcpy(&msg[2], src, bytes);
+
+	ret = i2c_master_send(i2c, msg, bytes + 2);
+	if (ret < 0)
+		return ret;
+	if (ret < bytes + 2)
+		return -EIO;
+
+	return 0;
+}
+
+static int wm8994_i2c_probe(struct i2c_client *i2c,
+			    const struct i2c_device_id *id)
+{
+	struct wm8994 *wm8994;
+
+	wm8994 = kzalloc(sizeof(struct wm8994), GFP_KERNEL);
+	if (wm8994 == NULL) {
+		kfree(i2c);
+		return -ENOMEM;
+	}
+
+	i2c_set_clientdata(i2c, wm8994);
+	wm8994->dev = &i2c->dev;
+	wm8994->control_data = i2c;
+	wm8994->read_dev = wm8994_i2c_read_device;
+	wm8994->write_dev = wm8994_i2c_write_device;
+
+	return wm8994_device_init(wm8994, id->driver_data, i2c->irq);
+}
+
+static int wm8994_i2c_remove(struct i2c_client *i2c)
+{
+	struct wm8994 *wm8994 = i2c_get_clientdata(i2c);
+
+	wm8994_device_exit(wm8994);
+
+	return 0;
+}
+
+#ifdef CONFIG_PM
+static int wm8994_i2c_suspend(struct i2c_client *i2c, pm_message_t state)
+{
+	return wm8994_device_suspend(&i2c->dev);
+}
+
+static int wm8994_i2c_resume(struct i2c_client *i2c)
+{
+	return wm8994_device_resume(&i2c->dev);
+}
+#else
+#define wm8994_i2c_suspend NULL
+#define wm8994_i2c_resume NULL
+#endif
+
+static const struct i2c_device_id wm8994_i2c_id[] = {
+	{ "wm8994", 0 },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, wm8994_i2c_id);
+
+static struct i2c_driver wm8994_i2c_driver = {
+	.driver = {
+		   .name = "wm8994",
+		   .owner = THIS_MODULE,
+	},
+	.probe = wm8994_i2c_probe,
+	.remove = wm8994_i2c_remove,
+	.suspend = wm8994_i2c_suspend,
+	.resume = wm8994_i2c_resume,
+	.id_table = wm8994_i2c_id,
+};
+
+static int __init wm8994_i2c_init(void)
+{
+	int ret;
+
+	ret = i2c_add_driver(&wm8994_i2c_driver);
+	if (ret != 0)
+		pr_err("Failed to register wm8994 I2C driver: %d\n", ret);
+
+	return ret;
+}
+module_init(wm8994_i2c_init);
+
+static void __exit wm8994_i2c_exit(void)
+{
+	i2c_del_driver(&wm8994_i2c_driver);
+}
+module_exit(wm8994_i2c_exit);
+
+MODULE_DESCRIPTION("Core support for the WM8994 audio CODEC");
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Mark Brown <broonie@opensource.wolfsonmicro.com>");