diff options
Diffstat (limited to 'drivers/mfd')
| -rw-r--r-- | drivers/mfd/mcp-core.c | 2 | ||||
| -rw-r--r-- | drivers/mfd/mcp-sa11x0.c | 3 | ||||
| -rw-r--r-- | drivers/mfd/mcp.h | 66 | ||||
| -rw-r--r-- | drivers/mfd/twl4030-core.c | 2 | ||||
| -rw-r--r-- | drivers/mfd/ucb1x00-assabet.c | 2 | ||||
| -rw-r--r-- | drivers/mfd/ucb1x00-core.c | 89 | ||||
| -rw-r--r-- | drivers/mfd/ucb1x00-ts.c | 2 | ||||
| -rw-r--r-- | drivers/mfd/ucb1x00.h | 255 | ||||
| -rw-r--r-- | drivers/mfd/wm831x-core.c | 2 |
9 files changed, 93 insertions, 330 deletions
diff --git a/drivers/mfd/mcp-core.c b/drivers/mfd/mcp-core.c index 57271cb3b31..84815f9ef63 100644 --- a/drivers/mfd/mcp-core.c +++ b/drivers/mfd/mcp-core.c @@ -17,11 +17,11 @@ #include <linux/device.h> #include <linux/slab.h> #include <linux/string.h> +#include <linux/mfd/mcp.h> #include <mach/dma.h> #include <asm/system.h> -#include "mcp.h" #define to_mcp(d) container_of(d, struct mcp, attached_device) #define to_mcp_driver(d) container_of(d, struct mcp_driver, drv) diff --git a/drivers/mfd/mcp-sa11x0.c b/drivers/mfd/mcp-sa11x0.c index 62b32dabf62..25842723272 100644 --- a/drivers/mfd/mcp-sa11x0.c +++ b/drivers/mfd/mcp-sa11x0.c @@ -19,6 +19,7 @@ #include <linux/spinlock.h> #include <linux/slab.h> #include <linux/platform_device.h> +#include <linux/mfd/mcp.h> #include <mach/dma.h> #include <mach/hardware.h> @@ -28,7 +29,6 @@ #include <mach/assabet.h> -#include "mcp.h" struct mcp_sa11x0 { u32 mccr0; @@ -163,6 +163,7 @@ static int mcp_sa11x0_probe(struct platform_device *pdev) mcp->dma_audio_wr = DMA_Ser4MCP0Wr; mcp->dma_telco_rd = DMA_Ser4MCP1Rd; mcp->dma_telco_wr = DMA_Ser4MCP1Wr; + mcp->gpio_base = data->gpio_base; platform_set_drvdata(pdev, mcp); diff --git a/drivers/mfd/mcp.h b/drivers/mfd/mcp.h deleted file mode 100644 index c093a93b880..00000000000 --- a/drivers/mfd/mcp.h +++ /dev/null @@ -1,66 +0,0 @@ -/* - * linux/drivers/mfd/mcp.h - * - * Copyright (C) 2001 Russell King, All Rights Reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License. - */ -#ifndef MCP_H -#define MCP_H - -struct mcp_ops; - -struct mcp { - struct module *owner; - struct mcp_ops *ops; - spinlock_t lock; - int use_count; - unsigned int sclk_rate; - unsigned int rw_timeout; - dma_device_t dma_audio_rd; - dma_device_t dma_audio_wr; - dma_device_t dma_telco_rd; - dma_device_t dma_telco_wr; - struct device attached_device; -}; - -struct mcp_ops { - void (*set_telecom_divisor)(struct mcp *, unsigned int); - void (*set_audio_divisor)(struct mcp *, unsigned int); - void (*reg_write)(struct mcp *, unsigned int, unsigned int); - unsigned int (*reg_read)(struct mcp *, unsigned int); - void (*enable)(struct mcp *); - void (*disable)(struct mcp *); -}; - -void mcp_set_telecom_divisor(struct mcp *, unsigned int); -void mcp_set_audio_divisor(struct mcp *, unsigned int); -void mcp_reg_write(struct mcp *, unsigned int, unsigned int); -unsigned int mcp_reg_read(struct mcp *, unsigned int); -void mcp_enable(struct mcp *); -void mcp_disable(struct mcp *); -#define mcp_get_sclk_rate(mcp) ((mcp)->sclk_rate) - -struct mcp *mcp_host_alloc(struct device *, size_t); -int mcp_host_register(struct mcp *); -void mcp_host_unregister(struct mcp *); - -struct mcp_driver { - struct device_driver drv; - int (*probe)(struct mcp *); - void (*remove)(struct mcp *); - int (*suspend)(struct mcp *, pm_message_t); - int (*resume)(struct mcp *); -}; - -int mcp_driver_register(struct mcp_driver *); -void mcp_driver_unregister(struct mcp_driver *); - -#define mcp_get_drvdata(mcp) dev_get_drvdata(&(mcp)->attached_device) -#define mcp_set_drvdata(mcp,d) dev_set_drvdata(&(mcp)->attached_device, d) - -#define mcp_priv(mcp) ((void *)((mcp)+1)) - -#endif diff --git a/drivers/mfd/twl4030-core.c b/drivers/mfd/twl4030-core.c index cf462b90dee..40449cdf09d 100644 --- a/drivers/mfd/twl4030-core.c +++ b/drivers/mfd/twl4030-core.c @@ -777,7 +777,7 @@ static int twl4030_remove(struct i2c_client *client) } /* NOTE: this driver only handles a single twl4030/tps659x0 chip */ -static int +static int __init twl4030_probe(struct i2c_client *client, const struct i2c_device_id *id) { int status; diff --git a/drivers/mfd/ucb1x00-assabet.c b/drivers/mfd/ucb1x00-assabet.c index 86fed4870f9..cea9da60850 100644 --- a/drivers/mfd/ucb1x00-assabet.c +++ b/drivers/mfd/ucb1x00-assabet.c @@ -14,10 +14,10 @@ #include <linux/fs.h> #include <linux/proc_fs.h> #include <linux/device.h> +#include <linux/mfd/ucb1x00.h> #include <mach/dma.h> -#include "ucb1x00.h" #define UCB1X00_ATTR(name,input)\ static ssize_t name##_show(struct device *dev, struct device_attribute *attr, \ diff --git a/drivers/mfd/ucb1x00-core.c b/drivers/mfd/ucb1x00-core.c index 60c3988f3cf..252b74188ec 100644 --- a/drivers/mfd/ucb1x00-core.c +++ b/drivers/mfd/ucb1x00-core.c @@ -25,12 +25,12 @@ #include <linux/interrupt.h> #include <linux/device.h> #include <linux/mutex.h> +#include <linux/mfd/ucb1x00.h> +#include <linux/gpio.h> #include <mach/dma.h> #include <mach/hardware.h> -#include "ucb1x00.h" - static DEFINE_MUTEX(ucb1x00_mutex); static LIST_HEAD(ucb1x00_drivers); static LIST_HEAD(ucb1x00_devices); @@ -108,6 +108,60 @@ unsigned int ucb1x00_io_read(struct ucb1x00 *ucb) return ucb1x00_reg_read(ucb, UCB_IO_DATA); } +static void ucb1x00_gpio_set(struct gpio_chip *chip, unsigned offset, int value) +{ + struct ucb1x00 *ucb = container_of(chip, struct ucb1x00, gpio); + unsigned long flags; + + spin_lock_irqsave(&ucb->io_lock, flags); + if (value) + ucb->io_out |= 1 << offset; + else + ucb->io_out &= ~(1 << offset); + + ucb1x00_reg_write(ucb, UCB_IO_DATA, ucb->io_out); + spin_unlock_irqrestore(&ucb->io_lock, flags); +} + +static int ucb1x00_gpio_get(struct gpio_chip *chip, unsigned offset) +{ + struct ucb1x00 *ucb = container_of(chip, struct ucb1x00, gpio); + return ucb1x00_reg_read(ucb, UCB_IO_DATA) & (1 << offset); +} + +static int ucb1x00_gpio_direction_input(struct gpio_chip *chip, unsigned offset) +{ + struct ucb1x00 *ucb = container_of(chip, struct ucb1x00, gpio); + unsigned long flags; + + spin_lock_irqsave(&ucb->io_lock, flags); + ucb->io_dir &= ~(1 << offset); + ucb1x00_reg_write(ucb, UCB_IO_DIR, ucb->io_dir); + spin_unlock_irqrestore(&ucb->io_lock, flags); + + return 0; +} + +static int ucb1x00_gpio_direction_output(struct gpio_chip *chip, unsigned offset + , int value) +{ + struct ucb1x00 *ucb = container_of(chip, struct ucb1x00, gpio); + unsigned long flags; + + spin_lock_irqsave(&ucb->io_lock, flags); + ucb->io_dir |= (1 << offset); + ucb1x00_reg_write(ucb, UCB_IO_DIR, ucb->io_dir); + + if (value) + ucb->io_out |= 1 << offset; + else + ucb->io_out &= ~(1 << offset); + ucb1x00_reg_write(ucb, UCB_IO_DATA, ucb->io_out); + spin_unlock_irqrestore(&ucb->io_lock, flags); + + return 0; +} + /* * UCB1300 data sheet says we must: * 1. enable ADC => 5us (including reference startup time) @@ -476,6 +530,7 @@ static int ucb1x00_probe(struct mcp *mcp) struct ucb1x00_driver *drv; unsigned int id; int ret = -ENODEV; + int temp; mcp_enable(mcp); id = mcp_reg_read(mcp, UCB_ID); @@ -508,12 +563,27 @@ static int ucb1x00_probe(struct mcp *mcp) goto err_free; } + ucb->gpio.base = -1; + if (mcp->gpio_base != 0) { + ucb->gpio.label = dev_name(&ucb->dev); + ucb->gpio.base = mcp->gpio_base; + ucb->gpio.ngpio = 10; + ucb->gpio.set = ucb1x00_gpio_set; + ucb->gpio.get = ucb1x00_gpio_get; + ucb->gpio.direction_input = ucb1x00_gpio_direction_input; + ucb->gpio.direction_output = ucb1x00_gpio_direction_output; + ret = gpiochip_add(&ucb->gpio); + if (ret) + goto err_free; + } else + dev_info(&ucb->dev, "gpio_base not set so no gpiolib support"); + ret = request_irq(ucb->irq, ucb1x00_irq, IRQF_TRIGGER_RISING, "UCB1x00", ucb); if (ret) { printk(KERN_ERR "ucb1x00: unable to grab irq%d: %d\n", ucb->irq, ret); - goto err_free; + goto err_gpio; } mcp_set_drvdata(mcp, ucb); @@ -522,6 +592,7 @@ static int ucb1x00_probe(struct mcp *mcp) if (ret) goto err_irq; + INIT_LIST_HEAD(&ucb->devs); mutex_lock(&ucb1x00_mutex); list_add(&ucb->node, &ucb1x00_devices); @@ -529,10 +600,14 @@ static int ucb1x00_probe(struct mcp *mcp) ucb1x00_add_dev(ucb, drv); } mutex_unlock(&ucb1x00_mutex); + goto out; err_irq: free_irq(ucb->irq, ucb); + err_gpio: + if (ucb->gpio.base != -1) + temp = gpiochip_remove(&ucb->gpio); err_free: kfree(ucb); err_disable: @@ -545,6 +620,7 @@ static void ucb1x00_remove(struct mcp *mcp) { struct ucb1x00 *ucb = mcp_get_drvdata(mcp); struct list_head *l, *n; + int ret; mutex_lock(&ucb1x00_mutex); list_del(&ucb->node); @@ -554,6 +630,12 @@ static void ucb1x00_remove(struct mcp *mcp) } mutex_unlock(&ucb1x00_mutex); + if (ucb->gpio.base != -1) { + ret = gpiochip_remove(&ucb->gpio); + if (ret) + dev_err(&ucb->dev, "Can't remove gpio chip: %d\n", ret); + } + free_irq(ucb->irq, ucb); device_unregister(&ucb->dev); } @@ -604,6 +686,7 @@ static int ucb1x00_resume(struct mcp *mcp) struct ucb1x00 *ucb = mcp_get_drvdata(mcp); struct ucb1x00_dev *dev; + ucb1x00_reg_write(ucb, UCB_IO_DIR, ucb->io_dir); mutex_lock(&ucb1x00_mutex); list_for_each_entry(dev, &ucb->devs, dev_node) { if (dev->drv->resume) diff --git a/drivers/mfd/ucb1x00-ts.c b/drivers/mfd/ucb1x00-ts.c index 61b7d3eb9a2..000cb414a78 100644 --- a/drivers/mfd/ucb1x00-ts.c +++ b/drivers/mfd/ucb1x00-ts.c @@ -30,12 +30,12 @@ #include <linux/freezer.h> #include <linux/slab.h> #include <linux/kthread.h> +#include <linux/mfd/ucb1x00.h> #include <mach/dma.h> #include <mach/collie.h> #include <asm/mach-types.h> -#include "ucb1x00.h" struct ucb1x00_ts { diff --git a/drivers/mfd/ucb1x00.h b/drivers/mfd/ucb1x00.h deleted file mode 100644 index a8ad8a0ed5d..00000000000 --- a/drivers/mfd/ucb1x00.h +++ /dev/null @@ -1,255 +0,0 @@ -/* - * linux/drivers/mfd/ucb1x00.h - * - * Copyright (C) 2001 Russell King, All Rights Reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License. - */ -#ifndef UCB1200_H -#define UCB1200_H - -#define UCB_IO_DATA 0x00 -#define UCB_IO_DIR 0x01 - -#define UCB_IO_0 (1 << 0) -#define UCB_IO_1 (1 << 1) -#define UCB_IO_2 (1 << 2) -#define UCB_IO_3 (1 << 3) -#define UCB_IO_4 (1 << 4) -#define UCB_IO_5 (1 << 5) -#define UCB_IO_6 (1 << 6) -#define UCB_IO_7 (1 << 7) -#define UCB_IO_8 (1 << 8) -#define UCB_IO_9 (1 << 9) - -#define UCB_IE_RIS 0x02 -#define UCB_IE_FAL 0x03 -#define UCB_IE_STATUS 0x04 -#define UCB_IE_CLEAR 0x04 -#define UCB_IE_ADC (1 << 11) -#define UCB_IE_TSPX (1 << 12) -#define UCB_IE_TSMX (1 << 13) -#define UCB_IE_TCLIP (1 << 14) -#define UCB_IE_ACLIP (1 << 15) - -#define UCB_IRQ_TSPX 12 - -#define UCB_TC_A 0x05 -#define UCB_TC_A_LOOP (1 << 7) /* UCB1200 */ -#define UCB_TC_A_AMPL (1 << 7) /* UCB1300 */ - -#define UCB_TC_B 0x06 -#define UCB_TC_B_VOICE_ENA (1 << 3) -#define UCB_TC_B_CLIP (1 << 4) -#define UCB_TC_B_ATT (1 << 6) -#define UCB_TC_B_SIDE_ENA (1 << 11) -#define UCB_TC_B_MUTE (1 << 13) -#define UCB_TC_B_IN_ENA (1 << 14) -#define UCB_TC_B_OUT_ENA (1 << 15) - -#define UCB_AC_A 0x07 -#define UCB_AC_B 0x08 -#define UCB_AC_B_LOOP (1 << 8) -#define UCB_AC_B_MUTE (1 << 13) -#define UCB_AC_B_IN_ENA (1 << 14) -#define UCB_AC_B_OUT_ENA (1 << 15) - -#define UCB_TS_CR 0x09 -#define UCB_TS_CR_TSMX_POW (1 << 0) -#define UCB_TS_CR_TSPX_POW (1 << 1) -#define UCB_TS_CR_TSMY_POW (1 << 2) -#define UCB_TS_CR_TSPY_POW (1 << 3) -#define UCB_TS_CR_TSMX_GND (1 << 4) -#define UCB_TS_CR_TSPX_GND (1 << 5) -#define UCB_TS_CR_TSMY_GND (1 << 6) -#define UCB_TS_CR_TSPY_GND (1 << 7) -#define UCB_TS_CR_MODE_INT (0 << 8) -#define UCB_TS_CR_MODE_PRES (1 << 8) -#define UCB_TS_CR_MODE_POS (2 << 8) -#define UCB_TS_CR_BIAS_ENA (1 << 11) -#define UCB_TS_CR_TSPX_LOW (1 << 12) -#define UCB_TS_CR_TSMX_LOW (1 << 13) - -#define UCB_ADC_CR 0x0a -#define UCB_ADC_SYNC_ENA (1 << 0) -#define UCB_ADC_VREFBYP_CON (1 << 1) -#define UCB_ADC_INP_TSPX (0 << 2) -#define UCB_ADC_INP_TSMX (1 << 2) -#define UCB_ADC_INP_TSPY (2 << 2) -#define UCB_ADC_INP_TSMY (3 << 2) -#define UCB_ADC_INP_AD0 (4 << 2) -#define UCB_ADC_INP_AD1 (5 << 2) -#define UCB_ADC_INP_AD2 (6 << 2) -#define UCB_ADC_INP_AD3 (7 << 2) -#define UCB_ADC_EXT_REF (1 << 5) -#define UCB_ADC_START (1 << 7) -#define UCB_ADC_ENA (1 << 15) - -#define UCB_ADC_DATA 0x0b -#define UCB_ADC_DAT_VAL (1 << 15) -#define UCB_ADC_DAT(x) (((x) & 0x7fe0) >> 5) - -#define UCB_ID 0x0c -#define UCB_ID_1200 0x1004 -#define UCB_ID_1300 0x1005 -#define UCB_ID_TC35143 0x9712 - -#define UCB_MODE 0x0d -#define UCB_MODE_DYN_VFLAG_ENA (1 << 12) -#define UCB_MODE_AUD_OFF_CAN (1 << 13) - -#include "mcp.h" - -struct ucb1x00_irq { - void *devid; - void (*fn)(int, void *); -}; - -struct ucb1x00 { - spinlock_t lock; - struct mcp *mcp; - unsigned int irq; - struct semaphore adc_sem; - spinlock_t io_lock; - u16 id; - u16 io_dir; - u16 io_out; - u16 adc_cr; - u16 irq_fal_enbl; - u16 irq_ris_enbl; - struct ucb1x00_irq irq_handler[16]; - struct device dev; - struct list_head node; - struct list_head devs; -}; - -struct ucb1x00_driver; - -struct ucb1x00_dev { - struct list_head dev_node; - struct list_head drv_node; - struct ucb1x00 *ucb; - struct ucb1x00_driver *drv; - void *priv; -}; - -struct ucb1x00_driver { - struct list_head node; - struct list_head devs; - int (*add)(struct ucb1x00_dev *dev); - void (*remove)(struct ucb1x00_dev *dev); - int (*suspend)(struct ucb1x00_dev *dev, pm_message_t state); - int (*resume)(struct ucb1x00_dev *dev); -}; - -#define classdev_to_ucb1x00(cd) container_of(cd, struct ucb1x00, dev) - -int ucb1x00_register_driver(struct ucb1x00_driver *); -void ucb1x00_unregister_driver(struct ucb1x00_driver *); - -/** - * ucb1x00_clkrate - return the UCB1x00 SIB clock rate - * @ucb: UCB1x00 structure describing chip - * - * Return the SIB clock rate in Hz. - */ -static inline unsigned int ucb1x00_clkrate(struct ucb1x00 *ucb) -{ - return mcp_get_sclk_rate(ucb->mcp); -} - -/** - * ucb1x00_enable - enable the UCB1x00 SIB clock - * @ucb: UCB1x00 structure describing chip - * - * Enable the SIB clock. This can be called multiple times. - */ -static inline void ucb1x00_enable(struct ucb1x00 *ucb) -{ - mcp_enable(ucb->mcp); -} - -/** - * ucb1x00_disable - disable the UCB1x00 SIB clock - * @ucb: UCB1x00 structure describing chip - * - * Disable the SIB clock. The SIB clock will only be disabled - * when the number of ucb1x00_enable calls match the number of - * ucb1x00_disable calls. - */ -static inline void ucb1x00_disable(struct ucb1x00 *ucb) -{ - mcp_disable(ucb->mcp); -} - -/** - * ucb1x00_reg_write - write a UCB1x00 register - * @ucb: UCB1x00 structure describing chip - * @reg: UCB1x00 4-bit register index to write - * @val: UCB1x00 16-bit value to write - * - * Write the UCB1x00 register @reg with value @val. The SIB - * clock must be running for this function to return. - */ -static inline void ucb1x00_reg_write(struct ucb1x00 *ucb, unsigned int reg, unsigned int val) -{ - mcp_reg_write(ucb->mcp, reg, val); -} - -/** - * ucb1x00_reg_read - read a UCB1x00 register - * @ucb: UCB1x00 structure describing chip - * @reg: UCB1x00 4-bit register index to write - * - * Read the UCB1x00 register @reg and return its value. The SIB - * clock must be running for this function to return. - */ -static inline unsigned int ucb1x00_reg_read(struct ucb1x00 *ucb, unsigned int reg) -{ - return mcp_reg_read(ucb->mcp, reg); -} -/** - * ucb1x00_set_audio_divisor - - * @ucb: UCB1x00 structure describing chip - * @div: SIB clock divisor - */ -static inline void ucb1x00_set_audio_divisor(struct ucb1x00 *ucb, unsigned int div) -{ - mcp_set_audio_divisor(ucb->mcp, div); -} - -/** - * ucb1x00_set_telecom_divisor - - * @ucb: UCB1x00 structure describing chip - * @div: SIB clock divisor - */ -static inline void ucb1x00_set_telecom_divisor(struct ucb1x00 *ucb, unsigned int div) -{ - mcp_set_telecom_divisor(ucb->mcp, div); -} - -void ucb1x00_io_set_dir(struct ucb1x00 *ucb, unsigned int, unsigned int); -void ucb1x00_io_write(struct ucb1x00 *ucb, unsigned int, unsigned int); -unsigned int ucb1x00_io_read(struct ucb1x00 *ucb); - -#define UCB_NOSYNC (0) -#define UCB_SYNC (1) - -unsigned int ucb1x00_adc_read(struct ucb1x00 *ucb, int adc_channel, int sync); -void ucb1x00_adc_enable(struct ucb1x00 *ucb); -void ucb1x00_adc_disable(struct ucb1x00 *ucb); - -/* - * Which edges of the IRQ do you want to control today? - */ -#define UCB_RISING (1 << 0) -#define UCB_FALLING (1 << 1) - -int ucb1x00_hook_irq(struct ucb1x00 *ucb, unsigned int idx, void (*fn)(int, void *), void *devid); -void ucb1x00_enable_irq(struct ucb1x00 *ucb, unsigned int idx, int edges); -void ucb1x00_disable_irq(struct ucb1x00 *ucb, unsigned int idx, int edges); -int ucb1x00_free_irq(struct ucb1x00 *ucb, unsigned int idx, void *devid); - -#endif diff --git a/drivers/mfd/wm831x-core.c b/drivers/mfd/wm831x-core.c index 49b7885c270..7f27576ca04 100644 --- a/drivers/mfd/wm831x-core.c +++ b/drivers/mfd/wm831x-core.c @@ -29,7 +29,7 @@ /* Current settings - values are 2*2^(reg_val/4) microamps. These are * exported since they are used by multiple drivers. */ -int wm831x_isinkv_values[WM831X_ISINK_MAX_ISEL] = { +int wm831x_isinkv_values[WM831X_ISINK_MAX_ISEL + 1] = { 2, 2, 3, |