diff options
Diffstat (limited to 'drivers/misc/pch_phub.c')
| -rw-r--r-- | drivers/misc/pch_phub.c | 90 |
1 files changed, 68 insertions, 22 deletions
diff --git a/drivers/misc/pch_phub.c b/drivers/misc/pch_phub.c index 744b804aca1..a19cb710a24 100644 --- a/drivers/misc/pch_phub.c +++ b/drivers/misc/pch_phub.c @@ -1,5 +1,5 @@ /* - * Copyright (C) 2010 OKI SEMICONDUCTOR Co., LTD. + * Copyright (C) 2010 OKI SEMICONDUCTOR CO., LTD. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -27,13 +27,19 @@ #include <linux/mutex.h> #include <linux/if_ether.h> #include <linux/ctype.h> +#include <linux/dmi.h> #define PHUB_STATUS 0x00 /* Status Register offset */ #define PHUB_CONTROL 0x04 /* Control Register offset */ #define PHUB_TIMEOUT 0x05 /* Time out value for Status Register */ #define PCH_PHUB_ROM_WRITE_ENABLE 0x01 /* Enabling for writing ROM */ #define PCH_PHUB_ROM_WRITE_DISABLE 0x00 /* Disabling for writing ROM */ -#define PCH_PHUB_ROM_START_ADDR 0x14 /* ROM data area start address offset */ +#define PCH_PHUB_MAC_START_ADDR 0x20C /* MAC data area start address offset */ +#define PCH_PHUB_ROM_START_ADDR_EG20T 0x14 /* ROM data area start address offset + (Intel EG20T PCH)*/ +#define PCH_PHUB_ROM_START_ADDR_ML7213 0x400 /* ROM data area start address + offset(OKI SEMICONDUCTOR ML7213) + */ /* MAX number of INT_REDUCE_CONTROL registers */ #define MAX_NUM_INT_REDUCE_CONTROL_REG 128 @@ -41,6 +47,21 @@ #define PCH_MINOR_NOS 1 #define CLKCFG_CAN_50MHZ 0x12000000 #define CLKCFG_CANCLK_MASK 0xFF000000 +#define CLKCFG_UART_MASK 0xFFFFFF + +/* CM-iTC */ +#define CLKCFG_UART_48MHZ (1 << 16) +#define CLKCFG_BAUDDIV (2 << 20) +#define CLKCFG_PLL2VCO (8 << 9) +#define CLKCFG_UARTCLKSEL (1 << 18) + +/* Macros for ML7213 */ +#define PCI_VENDOR_ID_ROHM 0x10db +#define PCI_DEVICE_ID_ROHM_ML7213_PHUB 0x801A + +/* Macros for ML7213 */ +#define PCI_VENDOR_ID_ROHM 0x10db +#define PCI_DEVICE_ID_ROHM_ML7213_PHUB 0x801A /* SROM ACCESS Macro */ #define PCH_WORD_ADDR_MASK (~((1 << 2) - 1)) @@ -298,7 +319,7 @@ static void pch_phub_read_serial_rom_val(struct pch_phub_reg *chip, { unsigned int mem_addr; - mem_addr = PCH_PHUB_ROM_START_ADDR + + mem_addr = PCH_PHUB_ROM_START_ADDR_EG20T + pch_phub_mac_offset[offset_address]; pch_phub_read_serial_rom(chip, mem_addr, data); @@ -315,7 +336,7 @@ static int pch_phub_write_serial_rom_val(struct pch_phub_reg *chip, int retval; unsigned int mem_addr; - mem_addr = PCH_PHUB_ROM_START_ADDR + + mem_addr = PCH_PHUB_ROM_START_ADDR_EG20T + pch_phub_mac_offset[offset_address]; retval = pch_phub_write_serial_rom(chip, mem_addr, data); @@ -594,23 +615,46 @@ static int __devinit pch_phub_probe(struct pci_dev *pdev, "pch_phub_extrom_base_address variable is %p\n", __func__, chip->pch_phub_extrom_base_address); - pci_set_drvdata(pdev, chip); - - retval = sysfs_create_file(&pdev->dev.kobj, &dev_attr_pch_mac.attr); - if (retval) - goto err_sysfs_create; - - retval = sysfs_create_bin_file(&pdev->dev.kobj, &pch_bin_attr); - if (retval) - goto exit_bin_attr; - - pch_phub_read_modify_write_reg(chip, (unsigned int)CLKCFG_REG_OFFSET, - CLKCFG_CAN_50MHZ, CLKCFG_CANCLK_MASK); + if (id->driver_data == 1) { + retval = sysfs_create_file(&pdev->dev.kobj, + &dev_attr_pch_mac.attr); + if (retval) + goto err_sysfs_create; - /* set the prefech value */ - iowrite32(0x000affaa, chip->pch_phub_base_address + 0x14); - /* set the interrupt delay value */ - iowrite32(0x25, chip->pch_phub_base_address + 0x44); + retval = sysfs_create_bin_file(&pdev->dev.kobj, &pch_bin_attr); + if (retval) + goto exit_bin_attr; + + pch_phub_read_modify_write_reg(chip, + (unsigned int)CLKCFG_REG_OFFSET, + CLKCFG_CAN_50MHZ, + CLKCFG_CANCLK_MASK); + + /* quirk for CM-iTC board */ + if (strstr(dmi_get_system_info(DMI_BOARD_NAME), "CM-iTC")) + pch_phub_read_modify_write_reg(chip, + (unsigned int)CLKCFG_REG_OFFSET, + CLKCFG_UART_48MHZ | CLKCFG_BAUDDIV | + CLKCFG_PLL2VCO | CLKCFG_UARTCLKSEL, + CLKCFG_UART_MASK); + + /* set the prefech value */ + iowrite32(0x000affaa, chip->pch_phub_base_address + 0x14); + /* set the interrupt delay value */ + iowrite32(0x25, chip->pch_phub_base_address + 0x44); + } else if (id->driver_data == 2) { + retval = sysfs_create_bin_file(&pdev->dev.kobj, &pch_bin_attr); + if (retval) + goto err_sysfs_create; + /* set the prefech value + * Device2(USB OHCI #1/ USB EHCI #1/ USB Device):a + * Device4(SDIO #0,1,2):f + * Device6(SATA 2):f + * Device8(USB OHCI #0/ USB EHCI #0):a + */ + iowrite32(0x000affa0, chip->pch_phub_base_address + 0x14); + } + pci_set_drvdata(pdev, chip); return 0; exit_bin_attr: @@ -687,9 +731,11 @@ static int pch_phub_resume(struct pci_dev *pdev) #endif /* CONFIG_PM */ static struct pci_device_id pch_phub_pcidev_id[] = { - {PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_PCH1_PHUB)}, - {0,} + { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_PCH1_PHUB), 1, }, + { PCI_VDEVICE(ROHM, PCI_DEVICE_ID_ROHM_ML7213_PHUB), 2, }, + { } }; +MODULE_DEVICE_TABLE(pci, pch_phub_pcidev_id); static struct pci_driver pch_phub_driver = { .name = "pch_phub", |