diff options
Diffstat (limited to 'drivers/misc')
| -rw-r--r-- | drivers/misc/eeprom/at24.c | 76 | ||||
| -rw-r--r-- | drivers/misc/hpilo.c | 1 | ||||
| -rw-r--r-- | drivers/misc/ibmasm/command.c | 1 | ||||
| -rw-r--r-- | drivers/misc/ibmasm/event.c | 1 | ||||
| -rw-r--r-- | drivers/misc/ibmasm/r_heartbeat.c | 1 | ||||
| -rw-r--r-- | drivers/misc/phantom.c | 1 | ||||
| -rw-r--r-- | drivers/misc/sgi-gru/gruprocfs.c | 13 |
7 files changed, 57 insertions, 37 deletions
diff --git a/drivers/misc/eeprom/at24.c b/drivers/misc/eeprom/at24.c index db39f4a52f5..2cb2736d65a 100644 --- a/drivers/misc/eeprom/at24.c +++ b/drivers/misc/eeprom/at24.c @@ -158,6 +158,7 @@ static ssize_t at24_eeprom_read(struct at24_data *at24, char *buf, struct i2c_msg msg[2]; u8 msgbuf[2]; struct i2c_client *client; + unsigned long timeout, read_time; int status, i; memset(msg, 0, sizeof(msg)); @@ -183,47 +184,60 @@ static ssize_t at24_eeprom_read(struct at24_data *at24, char *buf, if (count > io_limit) count = io_limit; - /* Smaller eeproms can work given some SMBus extension calls */ if (at24->use_smbus) { + /* Smaller eeproms can work given some SMBus extension calls */ if (count > I2C_SMBUS_BLOCK_MAX) count = I2C_SMBUS_BLOCK_MAX; - status = i2c_smbus_read_i2c_block_data(client, offset, - count, buf); - dev_dbg(&client->dev, "smbus read %zu@%d --> %d\n", - count, offset, status); - return (status < 0) ? -EIO : status; + } else { + /* + * When we have a better choice than SMBus calls, use a + * combined I2C message. Write address; then read up to + * io_limit data bytes. Note that read page rollover helps us + * here (unlike writes). msgbuf is u8 and will cast to our + * needs. + */ + i = 0; + if (at24->chip.flags & AT24_FLAG_ADDR16) + msgbuf[i++] = offset >> 8; + msgbuf[i++] = offset; + + msg[0].addr = client->addr; + msg[0].buf = msgbuf; + msg[0].len = i; + + msg[1].addr = client->addr; + msg[1].flags = I2C_M_RD; + msg[1].buf = buf; + msg[1].len = count; } /* - * When we have a better choice than SMBus calls, use a combined - * I2C message. Write address; then read up to io_limit data bytes. - * Note that read page rollover helps us here (unlike writes). - * msgbuf is u8 and will cast to our needs. + * Reads fail if the previous write didn't complete yet. We may + * loop a few times until this one succeeds, waiting at least + * long enough for one entire page write to work. */ - i = 0; - if (at24->chip.flags & AT24_FLAG_ADDR16) - msgbuf[i++] = offset >> 8; - msgbuf[i++] = offset; - - msg[0].addr = client->addr; - msg[0].buf = msgbuf; - msg[0].len = i; + timeout = jiffies + msecs_to_jiffies(write_timeout); + do { + read_time = jiffies; + if (at24->use_smbus) { + status = i2c_smbus_read_i2c_block_data(client, offset, + count, buf); + } else { + status = i2c_transfer(client->adapter, msg, 2); + if (status == 2) + status = count; + } + dev_dbg(&client->dev, "read %zu@%d --> %d (%ld)\n", + count, offset, status, jiffies); - msg[1].addr = client->addr; - msg[1].flags = I2C_M_RD; - msg[1].buf = buf; - msg[1].len = count; + if (status == count) + return count; - status = i2c_transfer(client->adapter, msg, 2); - dev_dbg(&client->dev, "i2c read %zu@%d --> %d\n", - count, offset, status); + /* REVISIT: at HZ=100, this is sloooow */ + msleep(1); + } while (time_before(read_time, timeout)); - if (status == 2) - return count; - else if (status >= 0) - return -EIO; - else - return status; + return -ETIMEDOUT; } static ssize_t at24_read(struct at24_data *at24, diff --git a/drivers/misc/hpilo.c b/drivers/misc/hpilo.c index 1ad27c6abcc..a92a3a742b4 100644 --- a/drivers/misc/hpilo.c +++ b/drivers/misc/hpilo.c @@ -18,6 +18,7 @@ #include <linux/device.h> #include <linux/file.h> #include <linux/cdev.h> +#include <linux/sched.h> #include <linux/spinlock.h> #include <linux/delay.h> #include <linux/uaccess.h> diff --git a/drivers/misc/ibmasm/command.c b/drivers/misc/ibmasm/command.c index 276d3fb6809..e2031739aa2 100644 --- a/drivers/misc/ibmasm/command.c +++ b/drivers/misc/ibmasm/command.c @@ -22,6 +22,7 @@ * */ +#include <linux/sched.h> #include "ibmasm.h" #include "lowlevel.h" diff --git a/drivers/misc/ibmasm/event.c b/drivers/misc/ibmasm/event.c index 68a0a5b9479..572d41ffc18 100644 --- a/drivers/misc/ibmasm/event.c +++ b/drivers/misc/ibmasm/event.c @@ -22,6 +22,7 @@ * */ +#include <linux/sched.h> #include "ibmasm.h" #include "lowlevel.h" diff --git a/drivers/misc/ibmasm/r_heartbeat.c b/drivers/misc/ibmasm/r_heartbeat.c index bec9e2c44be..2de487ac788 100644 --- a/drivers/misc/ibmasm/r_heartbeat.c +++ b/drivers/misc/ibmasm/r_heartbeat.c @@ -20,6 +20,7 @@ * */ +#include <linux/sched.h> #include "ibmasm.h" #include "dot_command.h" diff --git a/drivers/misc/phantom.c b/drivers/misc/phantom.c index 90a95ce8dc3..04c27266f56 100644 --- a/drivers/misc/phantom.c +++ b/drivers/misc/phantom.c @@ -22,6 +22,7 @@ #include <linux/interrupt.h> #include <linux/cdev.h> #include <linux/phantom.h> +#include <linux/sched.h> #include <linux/smp_lock.h> #include <asm/atomic.h> diff --git a/drivers/misc/sgi-gru/gruprocfs.c b/drivers/misc/sgi-gru/gruprocfs.c index ccd4408a26c..3f2375c5ba5 100644 --- a/drivers/misc/sgi-gru/gruprocfs.c +++ b/drivers/misc/sgi-gru/gruprocfs.c @@ -161,14 +161,15 @@ static int options_show(struct seq_file *s, void *p) static ssize_t options_write(struct file *file, const char __user *userbuf, size_t count, loff_t *data) { - unsigned long val; - char buf[80]; + char buf[20]; - if (strncpy_from_user(buf, userbuf, sizeof(buf) - 1) < 0) + if (count >= sizeof(buf)) + return -EINVAL; + if (copy_from_user(buf, userbuf, count)) return -EFAULT; - buf[count - 1] = '\0'; - if (!strict_strtoul(buf, 10, &val)) - gru_options = val; + buf[count] = '\0'; + if (strict_strtoul(buf, 0, &gru_options)) + return -EINVAL; return count; } |