diff options
Diffstat (limited to 'drivers/misc')
26 files changed, 2735 insertions, 47 deletions
diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig index b7d5ef234ac..4e007c6a4b4 100644 --- a/drivers/misc/Kconfig +++ b/drivers/misc/Kconfig @@ -2,6 +2,14 @@ # Misc strange devices # +# This one has to live outside of the MISC_DEVICES conditional, +# because it may be selected by drivers/platform/x86/hp_accel. +config SENSORS_LIS3LV02D + tristate + depends on INPUT + select INPUT_POLLDEV + default n + menuconfig MISC_DEVICES bool "Misc devices" ---help--- @@ -394,6 +402,16 @@ config DS1682 This driver can also be built as a module. If so, the module will be called ds1682. +config SPEAR13XX_PCIE_GADGET + bool "PCIe gadget support for SPEAr13XX platform" + depends on ARCH_SPEAR13XX + default n + help + This option enables gadget support for PCIe controller. If + board file defines any controller as PCIe endpoint then a sysfs + entry will be created for that controller. User can use these + sysfs node to configure PCIe EP as per his requirements. + config TI_DAC7512 tristate "Texas Instruments DAC7512" depends on SPI && SYSFS @@ -462,5 +480,6 @@ source "drivers/misc/eeprom/Kconfig" source "drivers/misc/cb710/Kconfig" source "drivers/misc/iwmc3200top/Kconfig" source "drivers/misc/ti-st/Kconfig" +source "drivers/misc/lis3lv02d/Kconfig" endif # MISC_DEVICES diff --git a/drivers/misc/Makefile b/drivers/misc/Makefile index 98009cc20cb..f5468602961 100644 --- a/drivers/misc/Makefile +++ b/drivers/misc/Makefile @@ -37,8 +37,10 @@ obj-$(CONFIG_IWMC3200TOP) += iwmc3200top/ obj-$(CONFIG_HMC6352) += hmc6352.o obj-y += eeprom/ obj-y += cb710/ +obj-$(CONFIG_SPEAR13XX_PCIE_GADGET) += spear13xx_pcie_gadget.o obj-$(CONFIG_VMWARE_BALLOON) += vmw_balloon.o obj-$(CONFIG_ARM_CHARLCD) += arm-charlcd.o obj-$(CONFIG_PCH_PHUB) += pch_phub.o obj-y += ti-st/ obj-$(CONFIG_AB8500_PWM) += ab8500-pwm.o +obj-y += lis3lv02d/ diff --git a/drivers/misc/apds9802als.c b/drivers/misc/apds9802als.c index 644d4cd071c..81db7811cf6 100644 --- a/drivers/misc/apds9802als.c +++ b/drivers/misc/apds9802als.c @@ -245,9 +245,8 @@ static int apds9802als_probe(struct i2c_client *client, als_set_default_config(client); mutex_init(&data->mutex); + pm_runtime_set_active(&client->dev); pm_runtime_enable(&client->dev); - pm_runtime_get(&client->dev); - pm_runtime_put(&client->dev); return res; als_error1: @@ -255,12 +254,19 @@ als_error1: return res; } -static int apds9802als_remove(struct i2c_client *client) +static int __devexit apds9802als_remove(struct i2c_client *client) { struct als_data *data = i2c_get_clientdata(client); + pm_runtime_get_sync(&client->dev); + als_set_power_state(client, false); sysfs_remove_group(&client->dev.kobj, &m_als_gr); + + pm_runtime_disable(&client->dev); + pm_runtime_set_suspended(&client->dev); + pm_runtime_put_noidle(&client->dev); + kfree(data); return 0; } @@ -275,9 +281,6 @@ static int apds9802als_suspend(struct i2c_client *client, pm_message_t mesg) static int apds9802als_resume(struct i2c_client *client) { als_set_default_config(client); - - pm_runtime_get(&client->dev); - pm_runtime_put(&client->dev); return 0; } @@ -323,7 +326,7 @@ static struct i2c_driver apds9802als_driver = { .pm = APDS9802ALS_PM_OPS, }, .probe = apds9802als_probe, - .remove = apds9802als_remove, + .remove = __devexit_p(apds9802als_remove), .suspend = apds9802als_suspend, .resume = apds9802als_resume, .id_table = apds9802als_id, diff --git a/drivers/misc/atmel_tclib.c b/drivers/misc/atmel_tclib.c index 3891124001f..a844810b50f 100644 --- a/drivers/misc/atmel_tclib.c +++ b/drivers/misc/atmel_tclib.c @@ -75,7 +75,7 @@ out: return tc; fail_ioremap: - release_resource(r); + release_mem_region(r->start, ATMEL_TC_IOMEM_SIZE); fail: tc = NULL; goto out; @@ -95,7 +95,7 @@ void atmel_tc_free(struct atmel_tc *tc) spin_lock(&tc_list_lock); if (tc->regs) { iounmap(tc->regs); - release_resource(tc->iomem); + release_mem_region(tc->iomem->start, ATMEL_TC_IOMEM_SIZE); tc->regs = NULL; tc->iomem = NULL; } diff --git a/drivers/misc/bh1780gli.c b/drivers/misc/bh1780gli.c index d5f3a3fd231..d07cd67c951 100644 --- a/drivers/misc/bh1780gli.c +++ b/drivers/misc/bh1780gli.c @@ -196,10 +196,11 @@ static int __devexit bh1780_remove(struct i2c_client *client) } #ifdef CONFIG_PM -static int bh1780_suspend(struct i2c_client *client, pm_message_t mesg) +static int bh1780_suspend(struct device *dev) { struct bh1780_data *ddata; int state, ret; + struct i2c_client *client = to_i2c_client(dev); ddata = i2c_get_clientdata(client); state = bh1780_read(ddata, BH1780_REG_CONTROL, "CONTROL"); @@ -217,14 +218,14 @@ static int bh1780_suspend(struct i2c_client *client, pm_message_t mesg) return 0; } -static int bh1780_resume(struct i2c_client *client) +static int bh1780_resume(struct device *dev) { struct bh1780_data *ddata; int state, ret; + struct i2c_client *client = to_i2c_client(dev); ddata = i2c_get_clientdata(client); state = ddata->power_state; - ret = bh1780_write(ddata, BH1780_REG_CONTROL, state, "CONTROL"); @@ -233,9 +234,10 @@ static int bh1780_resume(struct i2c_client *client) return 0; } +static SIMPLE_DEV_PM_OPS(bh1780_pm, bh1780_suspend, bh1780_resume); +#define BH1780_PMOPS (&bh1780_pm) #else -#define bh1780_suspend NULL -#define bh1780_resume NULL +#define BH1780_PMOPS NULL #endif /* CONFIG_PM */ static const struct i2c_device_id bh1780_id[] = { @@ -247,11 +249,10 @@ static struct i2c_driver bh1780_driver = { .probe = bh1780_probe, .remove = bh1780_remove, .id_table = bh1780_id, - .suspend = bh1780_suspend, - .resume = bh1780_resume, .driver = { - .name = "bh1780" - }, + .name = "bh1780", + .pm = BH1780_PMOPS, +}, }; static int __init bh1780_init(void) diff --git a/drivers/misc/bmp085.c b/drivers/misc/bmp085.c index b6e1c9a6679..5f898cb706a 100644 --- a/drivers/misc/bmp085.c +++ b/drivers/misc/bmp085.c @@ -2,7 +2,7 @@ This driver supports the bmp085 digital barometric pressure and temperature sensor from Bosch Sensortec. The datasheet - is avaliable from their website: + is available from their website: http://www.bosch-sensortec.com/content/language1/downloads/BST-BMP085-DS000-05.pdf A pressure measurement is issued by reading from pressure0_input. @@ -402,7 +402,7 @@ exit: return status; } -static int bmp085_probe(struct i2c_client *client, +static int __devinit bmp085_probe(struct i2c_client *client, const struct i2c_device_id *id) { struct bmp085_data *data; @@ -429,7 +429,7 @@ static int bmp085_probe(struct i2c_client *client, if (err) goto exit_free; - dev_info(&data->client->dev, "Succesfully initialized bmp085!\n"); + dev_info(&data->client->dev, "Successfully initialized bmp085!\n"); goto exit; exit_free: @@ -438,7 +438,7 @@ exit: return err; } -static int bmp085_remove(struct i2c_client *client) +static int __devexit bmp085_remove(struct i2c_client *client) { sysfs_remove_group(&client->dev.kobj, &bmp085_attr_group); kfree(i2c_get_clientdata(client)); @@ -458,7 +458,7 @@ static struct i2c_driver bmp085_driver = { }, .id_table = bmp085_id, .probe = bmp085_probe, - .remove = bmp085_remove, + .remove = __devexit_p(bmp085_remove), .detect = bmp085_detect, .address_list = normal_i2c diff --git a/drivers/misc/c2port/c2port-duramar2150.c b/drivers/misc/c2port/c2port-duramar2150.c index 338dcc12150..778fc3fdfb9 100644 --- a/drivers/misc/c2port/c2port-duramar2150.c +++ b/drivers/misc/c2port/c2port-duramar2150.c @@ -41,7 +41,7 @@ static void duramar2150_c2port_access(struct c2port_device *dev, int status) outb(v | (C2D | C2CK), DIR_PORT); else /* When access is "off" is important that both lines are set - * as inputs or hi-impedence */ + * as inputs or hi-impedance */ outb(v & ~(C2D | C2CK), DIR_PORT); mutex_unlock(&update_lock); diff --git a/drivers/misc/cb710/Makefile b/drivers/misc/cb710/Makefile index 7b80cbf1a60..467c8e9ca3c 100644 --- a/drivers/misc/cb710/Makefile +++ b/drivers/misc/cb710/Makefile @@ -1,6 +1,4 @@ -ifeq ($(CONFIG_CB710_DEBUG),y) - EXTRA_CFLAGS += -DDEBUG -endif +ccflags-$(CONFIG_CB710_DEBUG) := -DDEBUG obj-$(CONFIG_CB710_CORE) += cb710.o diff --git a/drivers/misc/ep93xx_pwm.c b/drivers/misc/ep93xx_pwm.c index 46b3439673e..16d7179e2f9 100644 --- a/drivers/misc/ep93xx_pwm.c +++ b/drivers/misc/ep93xx_pwm.c @@ -249,11 +249,11 @@ static ssize_t ep93xx_pwm_set_invert(struct device *dev, static DEVICE_ATTR(min_freq, S_IRUGO, ep93xx_pwm_get_min_freq, NULL); static DEVICE_ATTR(max_freq, S_IRUGO, ep93xx_pwm_get_max_freq, NULL); -static DEVICE_ATTR(freq, S_IWUGO | S_IRUGO, +static DEVICE_ATTR(freq, S_IWUSR | S_IRUGO, ep93xx_pwm_get_freq, ep93xx_pwm_set_freq); -static DEVICE_ATTR(duty_percent, S_IWUGO | S_IRUGO, +static DEVICE_ATTR(duty_percent, S_IWUSR | S_IRUGO, ep93xx_pwm_get_duty_percent, ep93xx_pwm_set_duty_percent); -static DEVICE_ATTR(invert, S_IWUGO | S_IRUGO, +static DEVICE_ATTR(invert, S_IWUSR | S_IRUGO, ep93xx_pwm_get_invert, ep93xx_pwm_set_invert); static struct attribute *ep93xx_pwm_attrs[] = { diff --git a/drivers/misc/hmc6352.c b/drivers/misc/hmc6352.c index 234bfcaf209..ca938fc8a8d 100644 --- a/drivers/misc/hmc6352.c +++ b/drivers/misc/hmc6352.c @@ -75,7 +75,7 @@ static ssize_t compass_heading_data_show(struct device *dev, { struct i2c_client *client = to_i2c_client(dev); unsigned char i2c_data[2]; - unsigned int ret; + int ret; mutex_lock(&compass_mutex); ret = compass_command(client, 'A'); @@ -86,7 +86,7 @@ static ssize_t compass_heading_data_show(struct device *dev, msleep(10); /* sending 'A' cmd we need to wait for 7-10 millisecs */ ret = i2c_master_recv(client, i2c_data, 2); mutex_unlock(&compass_mutex); - if (ret != 1) { + if (ret < 0) { dev_warn(dev, "i2c read data cmd failed\n"); return ret; } diff --git a/drivers/misc/ibmasm/remote.h b/drivers/misc/ibmasm/remote.h index 72acf5af7a2..00dbf1d4373 100644 --- a/drivers/misc/ibmasm/remote.h +++ b/drivers/misc/ibmasm/remote.h @@ -20,7 +20,7 @@ * * Author: Max Asböck <amax@us.ibm.com> * - * Orignally written by Pete Reynolds + * Originally written by Pete Reynolds */ #ifndef _IBMASM_REMOTE_H_ diff --git a/drivers/misc/iwmc3200top/main.c b/drivers/misc/iwmc3200top/main.c index 727af07f1fb..b1f4563be9a 100644 --- a/drivers/misc/iwmc3200top/main.c +++ b/drivers/misc/iwmc3200top/main.c @@ -268,7 +268,7 @@ static void iwmct_irq_read_worker(struct work_struct *ws) LOG_INFO(priv, IRQ, "ACK barker arrived " "- starting FW download\n"); } else { /* REBOOT barker */ - LOG_INFO(priv, IRQ, "Recieved reboot barker: %x\n", barker); + LOG_INFO(priv, IRQ, "Received reboot barker: %x\n", barker); priv->barker = barker; if (barker & BARKER_DNLOAD_SYNC_MSK) { diff --git a/drivers/misc/kgdbts.c b/drivers/misc/kgdbts.c index 59c118c19a9..74f16f167b8 100644 --- a/drivers/misc/kgdbts.c +++ b/drivers/misc/kgdbts.c @@ -645,7 +645,7 @@ static int validate_simple_test(char *put_str) while (*chk_str != '\0' && *put_str != '\0') { /* If someone does a * to match the rest of the string, allow - * it, or stop if the recieved string is complete. + * it, or stop if the received string is complete. */ if (*put_str == '#' || *chk_str == '*') return 0; @@ -988,7 +988,7 @@ static void kgdbts_run_tests(void) static int kgdbts_option_setup(char *opt) { - if (strlen(opt) > MAX_CONFIG_LEN) { + if (strlen(opt) >= MAX_CONFIG_LEN) { printk(KERN_ERR "kgdbts: config string too long\n"); return -ENOSPC; } diff --git a/drivers/misc/lis3lv02d/Kconfig b/drivers/misc/lis3lv02d/Kconfig new file mode 100644 index 00000000000..8f474e6fc7b --- /dev/null +++ b/drivers/misc/lis3lv02d/Kconfig @@ -0,0 +1,37 @@ +# +# STMicroelectonics LIS3LV02D and similar accelerometers +# + +config SENSORS_LIS3_SPI + tristate "STMicroeletronics LIS3LV02Dx three-axis digital accelerometer (SPI)" + depends on !ACPI && SPI_MASTER && INPUT + select SENSORS_LIS3LV02D + default n + help + This driver provides support for the LIS3LV02Dx accelerometer connected + via SPI. The accelerometer data is readable via + /sys/devices/platform/lis3lv02d. + + This driver also provides an absolute input class device, allowing + the laptop to act as a pinball machine-esque joystick. + + This driver can also be built as modules. If so, the core module + will be called lis3lv02d and a specific module for the SPI transport + is called lis3lv02d_spi. + +config SENSORS_LIS3_I2C + tristate "STMicroeletronics LIS3LV02Dx three-axis digital accelerometer (I2C)" + depends on I2C && INPUT + select SENSORS_LIS3LV02D + default n + help + This driver provides support for the LIS3LV02Dx accelerometer connected + via I2C. The accelerometer data is readable via + /sys/devices/platform/lis3lv02d. + + This driver also provides an absolute input class device, allowing + the device to act as a pinball machine-esque joystick. + + This driver can also be built as modules. If so, the core module + will be called lis3lv02d and a specific module for the I2C transport + is called lis3lv02d_i2c. diff --git a/drivers/misc/lis3lv02d/Makefile b/drivers/misc/lis3lv02d/Makefile new file mode 100644 index 00000000000..4bf58b16fcf --- /dev/null +++ b/drivers/misc/lis3lv02d/Makefile @@ -0,0 +1,7 @@ +# +# STMicroelectonics LIS3LV02D and similar accelerometers +# + +obj-$(CONFIG_SENSORS_LIS3LV02D) += lis3lv02d.o +obj-$(CONFIG_SENSORS_LIS3_SPI) += lis3lv02d_spi.o +obj-$(CONFIG_SENSORS_LIS3_I2C) += lis3lv02d_i2c.o diff --git a/drivers/misc/lis3lv02d/lis3lv02d.c b/drivers/misc/lis3lv02d/lis3lv02d.c new file mode 100644 index 00000000000..b928bc14e97 --- /dev/null +++ b/drivers/misc/lis3lv02d/lis3lv02d.c @@ -0,0 +1,999 @@ +/* + * lis3lv02d.c - ST LIS3LV02DL accelerometer driver + * + * Copyright (C) 2007-2008 Yan Burman + * Copyright (C) 2008 Eric Piel + * Copyright (C) 2008-2009 Pavel Machek + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/dmi.h> +#include <linux/module.h> +#include <linux/types.h> +#include <linux/platform_device.h> +#include <linux/interrupt.h> +#include <linux/input-polldev.h> +#include <linux/delay.h> +#include <linux/wait.h> +#include <linux/poll.h> +#include <linux/slab.h> +#include <linux/freezer.h> +#include <linux/uaccess.h> +#include <linux/miscdevice.h> +#include <linux/pm_runtime.h> +#include <linux/atomic.h> +#include "lis3lv02d.h" + +#define DRIVER_NAME "lis3lv02d" + +/* joystick device poll interval in milliseconds */ +#define MDPS_POLL_INTERVAL 50 +#define MDPS_POLL_MIN 0 +#define MDPS_POLL_MAX 2000 + +#define LIS3_SYSFS_POWERDOWN_DELAY 5000 /* In milliseconds */ + +#define SELFTEST_OK 0 +#define SELFTEST_FAIL -1 +#define SELFTEST_IRQ -2 + +#define IRQ_LINE0 0 +#define IRQ_LINE1 1 + +/* + * The sensor can also generate interrupts (DRDY) but it's pretty pointless + * because they are generated even if the data do not change. So it's better + * to keep the interrupt for the free-fall event. The values are updated at + * 40Hz (at the lowest frequency), but as it can be pretty time consuming on + * some low processor, we poll the sensor only at 20Hz... enough for the + * joystick. + */ + +#define LIS3_PWRON_DELAY_WAI_12B (5000) +#define LIS3_PWRON_DELAY_WAI_8B (3000) + +/* + * LIS3LV02D spec says 1024 LSBs corresponds 1 G -> 1LSB is 1000/1024 mG + * LIS302D spec says: 18 mG / digit + * LIS3_ACCURACY is used to increase accuracy of the intermediate + * calculation results. + */ +#define LIS3_ACCURACY 1024 +/* Sensitivity values for -2G +2G scale */ +#define LIS3_SENSITIVITY_12B ((LIS3_ACCURACY * 1000) / 1024) +#define LIS3_SENSITIVITY_8B (18 * LIS3_ACCURACY) + +#define LIS3_DEFAULT_FUZZ_12B 3 +#define LIS3_DEFAULT_FLAT_12B 3 +#define LIS3_DEFAULT_FUZZ_8B 1 +#define LIS3_DEFAULT_FLAT_8B 1 + +struct lis3lv02d lis3_dev = { + .misc_wait = __WAIT_QUEUE_HEAD_INITIALIZER(lis3_dev.misc_wait), +}; +EXPORT_SYMBOL_GPL(lis3_dev); + +/* just like param_set_int() but does sanity-check so that it won't point + * over the axis array size + */ +static int param_set_axis(const char *val, const struct kernel_param *kp) +{ + int ret = param_set_int(val, kp); + if (!ret) { + int val = *(int *)kp->arg; + if (val < 0) + val = -val; + if (!val || val > 3) + return -EINVAL; + } + return ret; +} + +static struct kernel_param_ops param_ops_axis = { + .set = param_set_axis, + .get = param_get_int, +}; + +module_param_array_named(axes, lis3_dev.ac.as_array, axis, NULL, 0644); +MODULE_PARM_DESC(axes, "Axis-mapping for x,y,z directions"); + +static s16 lis3lv02d_read_8(struct lis3lv02d *lis3, int reg) +{ + s8 lo; + if (lis3->read(lis3, reg, &lo) < 0) + return 0; + + return lo; +} + +static s16 lis3lv02d_read_12(struct lis3lv02d *lis3, int reg) +{ + u8 lo, hi; + + lis3->read(lis3, reg - 1, &lo); + lis3->read(lis3, reg, &hi); + /* In "12 bit right justified" mode, bit 6, bit 7, bit 8 = bit 5 */ + return (s16)((hi << 8) | lo); +} + +/** + * lis3lv02d_get_axis - For the given axis, give the value converted + * @axis: 1,2,3 - can also be negative + * @hw_values: raw values returned by the hardware + * + * Returns the converted value. + */ +static inline int lis3lv02d_get_axis(s8 axis, int hw_values[3]) +{ + if (axis > 0) + return hw_values[axis - 1]; + else + return -hw_values[-axis - 1]; +} + +/** + * lis3lv02d_get_xyz - Get X, Y and Z axis values from the accelerometer + * @lis3: pointer to the device struct + * @x: where to store the X axis value + * @y: where to store the Y axis value + * @z: where to store the Z axis value + * + * Note that 40Hz input device can eat up about 10% CPU at 800MHZ + */ +static void lis3lv02d_get_xyz(struct lis3lv02d *lis3, int *x, int *y, int *z) +{ + int position[3]; + int i; + + if (lis3->blkread) { + if (lis3_dev.whoami == WAI_12B) { + u16 data[3]; + lis3->blkread(lis3, OUTX_L, 6, (u8 *)data); + for (i = 0; i < 3; i++) + position[i] = (s16)le16_to_cpu(data[i]); + } else { + u8 data[5]; + /* Data: x, dummy, y, dummy, z */ + lis3->blkread(lis3, OUTX, 5, data); + for (i = 0; i < 3; i++) + position[i] = (s8)data[i * 2]; + } + } else { + position[0] = lis3->read_data(lis3, OUTX); + position[1] = lis3->read_data(lis3, OUTY); + position[2] = lis3->read_data(lis3, OUTZ); + } + + for (i = 0; i < 3; i++) + position[i] = (position[i] * lis3->scale) / LIS3_ACCURACY; + + *x = lis3lv02d_get_axis(lis3->ac.x, position); + *y = lis3lv02d_get_axis(lis3->ac.y, position); + *z = lis3lv02d_get_axis(lis3->ac.z, position); +} + +/* conversion btw sampling rate and the register values */ +static int lis3_12_rates[4] = {40, 160, 640, 2560}; +static int lis3_8_rates[2] = {100, 400}; +static int lis3_3dc_rates[16] = {0, 1, 10, 25, 50, 100, 200, 400, 1600, 5000}; + +/* ODR is Output Data Rate */ +static int lis3lv02d_get_odr(void) +{ + u8 ctrl; + int shift; + + lis3_dev.read(&lis3_dev, CTRL_REG1, &ctrl); + ctrl &= lis3_dev.odr_mask; + shift = ffs(lis3_dev.odr_mask) - 1; + return lis3_dev.odrs[(ctrl >> shift)]; +} + +static int lis3lv02d_set_odr(int rate) +{ + u8 ctrl; + int i, len, shift; + + if (!rate) + return -EINVAL; + + lis3_dev.read(&lis3_dev, CTRL_REG1, &ctrl); + ctrl &= ~lis3_dev.odr_mask; + len = 1 << hweight_long(lis3_dev.odr_mask); /* # of possible values */ + shift = ffs(lis3_dev.odr_mask) - 1; + + for (i = 0; i < len; i++) + if (lis3_dev.odrs[i] == rate) { + lis3_dev.write(&lis3_dev, CTRL_REG1, + ctrl | (i << shift)); + return 0; + } + return -EINVAL; +} + +static int lis3lv02d_selftest(struct lis3lv02d *lis3, s16 results[3]) +{ + u8 ctlreg, reg; + s16 x, y, z; + u8 selftest; + int ret; + u8 ctrl_reg_data; + unsigned char irq_cfg; + + mutex_lock(&lis3->mutex); + + irq_cfg = lis3->irq_cfg; + if (lis3_dev.whoami == WAI_8B) { + lis3->data_ready_count[IRQ_LINE0] = 0; + lis3->data_ready_count[IRQ_LINE1] = 0; + + /* Change interrupt cfg to data ready for selftest */ + atomic_inc(&lis3_dev.wake_thread); + lis3->irq_cfg = LIS3_IRQ1_DATA_READY | LIS3_IRQ2_DATA_READY; + lis3->read(lis3, CTRL_REG3, &ctrl_reg_data); + lis3->write(lis3, CTRL_REG3, (ctrl_reg_data & + ~(LIS3_IRQ1_MASK | LIS3_IRQ2_MASK)) | + (LIS3_IRQ1_DATA_READY | LIS3_IRQ2_DATA_READY)); + } + + if (lis3_dev.whoami == WAI_3DC) { + ctlreg = CTRL_REG4; + selftest = CTRL4_ST0; + } else { + ctlreg = CTRL_REG1; + if (lis3_dev.whoami == WAI_12B) + selftest = CTRL1_ST; + else + selftest = CTRL1_STP; + } + + lis3->read(lis3, ctlreg, ®); + lis3->write(lis3, ctlreg, (reg | selftest)); + msleep(lis3->pwron_delay / lis3lv02d_get_odr()); + + /* Read directly to avoid axis remap */ + x = lis3->read_data(lis3, OUTX); + y = lis3->read_data(lis3, OUTY); + z = lis3->read_data(lis3, OUTZ); + + /* back to normal settings */ + lis3->write(lis3, ctlreg, reg); + msleep(lis3->pwron_delay / lis3lv02d_get_odr()); + + results[0] = x - lis3->read_data(lis3, OUTX); + results[1] = y - lis3->read_data(lis3, OUTY); + results[2] = z - lis3->read_data(lis3, OUTZ); + + ret = 0; + + if (lis3_dev.whoami == WAI_8B) { + /* Restore original interrupt configuration */ + atomic_dec(&lis3_dev.wake_thread); + lis3->write(lis3, CTRL_REG3, ctrl_reg_data); + lis3->irq_cfg = irq_cfg; + + if ((irq_cfg & LIS3_IRQ1_MASK) && + lis3->data_ready_count[IRQ_LINE0] < 2) { + ret = SELFTEST_IRQ; + goto fail; + } + + if ((irq_cfg & LIS3_IRQ2_MASK) && + lis3->data_ready_count[IRQ_LINE1] < 2) { + ret = SELFTEST_IRQ; + goto fail; + } + } + + if (lis3->pdata) { + int i; + for (i = 0; i < 3; i++) { + /* Check against selftest acceptance limits */ + if ((results[i] < lis3->pdata->st_min_limits[i]) || + (results[i] > lis3->pdata->st_max_limits[i])) { + ret = SELFTEST_FAIL; + goto fail; + } + } + } + + /* test passed */ +fail: + mutex_unlock(&lis3->mutex); + return ret; +} + +/* + * Order of registers in the list affects to order of the restore process. + * Perhaps it is a good idea to set interrupt enable register as a last one + * after all other configurations + */ +static u8 lis3_wai8_regs[] = { FF_WU_CFG_1, FF_WU_THS_1, FF_WU_DURATION_1, + FF_WU_CFG_2, FF_WU_THS_2, FF_WU_DURATION_2, + CLICK_CFG, CLICK_SRC, CLICK_THSY_X, CLICK_THSZ, + CLICK_TIMELIMIT, CLICK_LATENCY, CLICK_WINDOW, + CTRL_REG1, CTRL_REG2, CTRL_REG3}; + +static u8 lis3_wai12_regs[] = {FF_WU_CFG, FF_WU_THS_L, FF_WU_THS_H, + FF_WU_DURATION, DD_CFG, DD_THSI_L, DD_THSI_H, + DD_THSE_L, DD_THSE_H, + CTRL_REG1, CTRL_REG3, CTRL_REG2}; + +static inline void lis3_context_save(struct lis3lv02d *lis3) +{ + int i; + for (i = 0; i < lis3->regs_size; i++) + lis3->read(lis3, lis3->regs[i], &lis3->reg_cache[i]); + lis3->regs_stored = true; +} + +static inline void lis3_context_restore(struct lis3lv02d *lis3) +{ + int i; + if (lis3->regs_stored) + for (i = 0; i < lis3->regs_size; i++) + lis3->write(lis3, lis3->regs[i], lis3->reg_cache[i]); +} + +void lis3lv02d_poweroff(struct lis3lv02d *lis3) +{ + if (lis3->reg_ctrl) + lis3_context_save(lis3); + /* disable X,Y,Z axis and power down */ + lis3->write(lis3, CTRL_REG1, 0x00); + if (lis3->reg_ctrl) + lis3->reg_ctrl(lis3, LIS3_REG_OFF); +} +EXPORT_SYMBOL_GPL(lis3lv02d_poweroff); + +void lis3lv02d_poweron(struct lis3lv02d *lis3) +{ + u8 reg; + + lis3->init(lis3); + + /* + * Common configuration + * BDU: (12 bits sensors only) LSB and MSB values are not updated until + * both have been read. So the value read will always be correct. + * Set BOOT bit to refresh factory tuning values. + */ + lis3->read(lis3, CTRL_REG2, ®); + if (lis3->whoami == WAI_12B) + reg |= CTRL2_BDU | CTRL2_BOOT; + else + reg |= CTRL2_BOOT_8B; + lis3->write(lis3, CTRL_REG2, reg); + + /* LIS3 power on delay is quite long */ + msleep(lis3->pwron_delay / lis3lv02d_get_odr()); + + if (lis3->reg_ctrl) + lis3_context_restore(lis3); +} +EXPORT_SYMBOL_GPL(lis3lv02d_poweron); + + +static void lis3lv02d_joystick_poll(struct input_polled_dev *pidev) +{ + int x, y, z; + + mutex_lock(&lis3_dev.mutex); + lis3lv02d_get_xyz(&lis3_dev, &x, &y, &z); + input_report_abs(pidev->input, ABS_X, x); + input_report_abs(pidev->input, ABS_Y, y); + input_report_abs(pidev->input, ABS_Z, z); + input_sync(pidev->input); + mutex_unlock(&lis3_dev.mutex); +} + +static void lis3lv02d_joystick_open(struct input_polled_dev *pidev) +{ + if (lis3_dev.pm_dev) + pm_runtime_get_sync(lis3_dev.pm_dev); + + if (lis3_dev.pdata && lis3_dev.whoami == WAI_8B && lis3_dev.idev) + atomic_set(&lis3_dev.wake_thread, 1); + /* + * Update coordinates for the case where poll interval is 0 and + * the chip in running purely under interrupt control + */ + lis3lv02d_joystick_poll(pidev); +} + +static void lis3lv02d_joystick_close(struct input_polled_dev *pidev) +{ + atomic_set(&lis3_dev.wake_thread, 0); + if (lis3_dev.pm_dev) + pm_runtime_put(lis3_dev.pm_dev); +} + +static irqreturn_t lis302dl_interrupt(int irq, void *dummy) +{ + if (!test_bit(0, &lis3_dev.misc_opened)) + goto out; + + /* + * Be careful: on some HP laptops the bios force DD when on battery and + * the lid is closed. This leads to interrupts as soon as a little move + * is done. + */ + atomic_inc(&lis3_dev.count); + + wake_up_interruptible(&lis3_dev.misc_wait); + kill_fasync(&lis3_dev.async_queue, SIGIO, POLL_IN); +out: + if (atomic_read(&lis3_dev.wake_thread)) + return IRQ_WAKE_THREAD; + return IRQ_HANDLED; +} + +static void lis302dl_interrupt_handle_click(struct lis3lv02d *lis3) +{ + struct input_dev *dev = lis3->idev->input; + u8 click_src; + + mutex_lock(&lis3->mutex); + lis3->read(lis3, CLICK_SRC, &click_src); + + if (click_src & CLICK_SINGLE_X) { + input_report_key(dev, lis3->mapped_btns[0], 1); + input_report_key(dev, lis3->mapped_btns[0], 0); + } + + if (click_src & CLICK_SINGLE_Y) { + input_report_key(dev, lis3->mapped_btns[1], 1); + input_report_key(dev, lis3->mapped_btns[1], 0); + } + + if (click_src & CLICK_SINGLE_Z) { + input_report_key(dev, lis3->mapped_btns[2], 1); + input_report_key(dev, lis3->mapped_btns[2], 0); + } + input_sync(dev); + mutex_unlock(&lis3->mutex); +} + +static inline void lis302dl_data_ready(struct lis3lv02d *lis3, int index) +{ + int dummy; + + /* Dummy read to ack interrupt */ + lis3lv02d_get_xyz(lis3, &dummy, &dummy, &dummy); + lis3->data_ready_count[index]++; +} + +static irqreturn_t lis302dl_interrupt_thread1_8b(int irq, void *data) +{ + struct lis3lv02d *lis3 = data; + u8 irq_cfg = lis3->irq_cfg & LIS3_IRQ1_MASK; + + if (irq_cfg == LIS3_IRQ1_CLICK) + lis302dl_interrupt_handle_click(lis3); + else if (unlikely(irq_cfg == LIS3_IRQ1_DATA_READY)) + lis302dl_data_ready(lis3, IRQ_LINE0); + else + lis3lv02d_joystick_poll(lis3->idev); + + return IRQ_HANDLED; +} + +static irqreturn_t lis302dl_interrupt_thread2_8b(int irq, void *data) +{ + struct lis3lv02d *lis3 = data; + u8 irq_cfg = lis3->irq_cfg & LIS3_IRQ2_MASK; + + if (irq_cfg == LIS3_IRQ2_CLICK) + lis302dl_interrupt_handle_click(lis3); + else if (unlikely(irq_cfg == LIS3_IRQ2_DATA_READY)) + lis302dl_data_ready(lis3, IRQ_LINE1); + else + lis3lv02d_joystick_poll(lis3->idev); + + return IRQ_HANDLED; +} + +static int lis3lv02d_misc_open(struct inode *inode, struct file *file) +{ + if (test_and_set_bit(0, &lis3_dev.misc_opened)) + return -EBUSY; /* already open */ + + if (lis3_dev.pm_dev) + pm_runtime_get_sync(lis3_dev.pm_dev); + + atomic_set(&lis3_dev.count, 0); + return 0; +} + +static int lis3lv02d_misc_release(struct inode *inode, struct file *file) +{ + fasync_helper(-1, file, 0, &lis3_dev.async_queue); + clear_bit(0, &lis3_dev.misc_opened); /* release the device */ + if (lis3_dev.pm_dev) + pm_runtime_put(lis3_dev.pm_dev); + return 0; +} + +static ssize_t lis3lv02d_misc_read(struct file *file, char __user *buf, + size_t count, loff_t *pos) +{ + DECLARE_WAITQUEUE(wait, current); + u32 data; + unsigned char byte_data; + ssize_t retval = 1; + + if (count < 1) + return -EINVAL; + + add_wait_queue(&lis3_dev.misc_wait, &wait); + while (true) { + set_current_state(TASK_INTERRUPTIBLE); + data = atomic_xchg(&lis3_dev.count, 0); + if (data) + break; + + if (file->f_flags & O_NONBLOCK) { + retval = -EAGAIN; + goto out; + } + + if (signal_pending(current)) { + retval = -ERESTARTSYS; + goto out; + } + + schedule(); + } + + if (data < 255) + byte_data = data; + else + byte_data = 255; + + /* make sure we are not going into copy_to_user() with + * TASK_INTERRUPTIBLE state */ + set_current_state(TASK_RUNNING); + if (copy_to_user(buf, &byte_data, sizeof(byte_data))) + retval = -EFAULT; + +out: + __set_current_state(TASK_RUNNING); + remove_wait_queue(&lis3_dev.misc_wait, &wait); + + return retval; +} + +static unsigned int lis3lv02d_misc_poll(struct file *file, poll_table *wait) +{ + poll_wait(file, &lis3_dev.misc_wait, wait); + if (atomic_read(&lis3_dev.count)) + return POLLIN | POLLRDNORM; + return 0; +} + +static int lis3lv02d_misc_fasync(int fd, struct file *file, int on) +{ + return fasync_helper(fd, file, on, &lis3_dev.async_queue); +} + +static const struct file_operations lis3lv02d_misc_fops = { + .owner = THIS_MODULE, + .llseek = no_llseek, + .read = lis3lv02d_misc_read, + .open = lis3lv02d_misc_open, + .release = lis3lv02d_misc_release, + .poll = lis3lv02d_misc_poll, + .fasync = lis3lv02d_misc_fasync, +}; + +static struct miscdevice lis3lv02d_misc_device = { + .minor = MISC_DYNAMIC_MINOR, + .name = "freefall", + .fops = &lis3lv02d_misc_fops, +}; + +int lis3lv02d_joystick_enable(void) +{ + struct input_dev *input_dev; + int err; + int max_val, fuzz, flat; + int btns[] = {BTN_X, BTN_Y, BTN_Z}; + + if (lis3_dev.idev) + return -EINVAL; + + lis3_dev.idev = input_allocate_polled_device(); + if (!lis3_dev.idev) + return -ENOMEM; + + lis3_dev.idev->poll = lis3lv02d_joystick_poll; + lis3_dev.idev->open = lis3lv02d_joystick_open; + lis3_dev.idev->close = lis3lv02d_joystick_close; + lis3_dev.idev->poll_interval = MDPS_POLL_INTERVAL; + lis3_dev.idev->poll_interval_min = MDPS_POLL_MIN; + lis3_dev.idev->poll_interval_max = MDPS_POLL_MAX; + input_dev = lis3_dev.idev->input; + + input_dev->name = "ST LIS3LV02DL Accelerometer"; + input_dev->phys = DRIVER_NAME "/input0"; + input_dev->id.bustype = BUS_HOST; + input_dev->id.vendor = 0; + input_dev->dev.parent = &lis3_dev.pdev->dev; + + set_bit(EV_ABS, input_dev->evbit); + max_val = (lis3_dev.mdps_max_val * lis3_dev.scale) / LIS3_ACCURACY; + if (lis3_dev.whoami == WAI_12B) { + fuzz = LIS3_DEFAULT_FUZZ_12B; + flat = LIS3_DEFAULT_FLAT_12B; + } else { + fuzz = LIS3_DEFAULT_FUZZ_8B; + flat = LIS3_DEFAULT_FLAT_8B; + } + fuzz = (fuzz * lis3_dev.scale) / LIS3_ACCURACY; + flat = (flat * lis3_dev.scale) / LIS3_ACCURACY; + + input_set_abs_params(input_dev, ABS_X, -max_val, max_val, fuzz, flat); + input_set_abs_params(input_dev, ABS_Y, -max_val, max_val, fuzz, flat); + input_set_abs_params(input_dev, ABS_Z, -max_val, max_val, fuzz, flat); + + lis3_dev.mapped_btns[0] = lis3lv02d_get_axis(abs(lis3_dev.ac.x), btns); + lis3_dev.mapped_btns[1] = lis3lv02d_get_axis(abs(lis3_dev.ac.y), btns); + lis3_dev.mapped_btns[2] = lis3lv02d_get_axis(abs(lis3_dev.ac.z), btns); + + err = input_register_polled_device(lis3_dev.idev); + if (err) { + input_free_polled_device(lis3_dev.idev); + lis3_dev.idev = NULL; + } + + return err; +} +EXPORT_SYMBOL_GPL(lis3lv02d_joystick_enable); + +void lis3lv02d_joystick_disable(void) +{ + if (lis3_dev.irq) + free_irq(lis3_dev.irq, &lis3_dev); + if (lis3_dev.pdata && lis3_dev.pdata->irq2) + free_irq(lis3_dev.pdata->irq2, &lis3_dev); + + if (!lis3_dev.idev) + return; + + if (lis3_dev.irq) + misc_deregister(&lis3lv02d_misc_device); + input_unregister_polled_device(lis3_dev.idev); + input_free_polled_device(lis3_dev.idev); + lis3_dev.idev = NULL; +} +EXPORT_SYMBOL_GPL(lis3lv02d_joystick_disable); + +/* Sysfs stuff */ +static void lis3lv02d_sysfs_poweron(struct lis3lv02d *lis3) +{ + /* + * SYSFS functions are fast visitors so put-call + * immediately after the get-call. However, keep + * chip running for a while and schedule delayed + * suspend. This way periodic sysfs calls doesn't + * suffer from relatively long power up time. + */ + + if (lis3->pm_dev) { + pm_runtime_get_sync(lis3->pm_dev); + pm_runtime_put_noidle(lis3->pm_dev); + pm_schedule_suspend(lis3->pm_dev, LIS3_SYSFS_POWERDOWN_DELAY); + } +} + +static ssize_t lis3lv02d_selftest_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + s16 values[3]; + + static const char ok[] = "OK"; + static const char fail[] = "FAIL"; + static const char irq[] = "FAIL_IRQ"; + const char *res; + + lis3lv02d_sysfs_poweron(&lis3_dev); + switch (lis3lv02d_selftest(&lis3_dev, values)) { + case SELFTEST_FAIL: + res = fail; + break; + case SELFTEST_IRQ: + res = irq; + break; + case SELFTEST_OK: + default: + res = ok; + break; + } + return sprintf(buf, "%s %d %d %d\n", res, + values[0], values[1], values[2]); +} + +static ssize_t lis3lv02d_position_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + int x, y, z; + + lis3lv02d_sysfs_poweron(&lis3_dev); + mutex_lock(&lis3_dev.mutex); + lis3lv02d_get_xyz(&lis3_dev, &x, &y, &z); + mutex_unlock(&lis3_dev.mutex); + return sprintf(buf, "(%d,%d,%d)\n", x, y, z); +} + +static ssize_t lis3lv02d_rate_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + lis3lv02d_sysfs_poweron(&lis3_dev); + return sprintf(buf, "%d\n", lis3lv02d_get_odr()); +} + +static ssize_t lis3lv02d_rate_set(struct device *dev, + struct device_attribute *attr, const char *buf, + size_t count) +{ + unsigned long rate; + + if (strict_strtoul(buf, 0, &rate)) + return -EINVAL; + + lis3lv02d_sysfs_poweron(&lis3_dev); + if (lis3lv02d_set_odr(rate)) + return -EINVAL; + + return count; +} + +static DEVICE_ATTR(selftest, S_IRUSR, lis3lv02d_selftest_show, NULL); +static DEVICE_ATTR(position, S_IRUGO, lis3lv02d_position_show, NULL); +static DEVICE_ATTR(rate, S_IRUGO | S_IWUSR, lis3lv02d_rate_show, + lis3lv02d_rate_set); + +static struct attribute *lis3lv02d_attributes[] = { + &dev_attr_selftest.attr, + &dev_attr_position.attr, + &dev_attr_rate.attr, + NULL +}; + +static struct attribute_group lis3lv02d_attribute_group = { + .attrs = lis3lv02d_attributes +}; + + +static int lis3lv02d_add_fs(struct lis3lv02d *lis3) +{ + lis3->pdev = platform_device_register_simple(DRIVER_NAME, -1, NULL, 0); + if (IS_ERR(lis3->pdev)) + return PTR_ERR(lis3->pdev); + + return sysfs_create_group(&lis3->pdev->dev.kobj, &lis3lv02d_attribute_group); +} + +int lis3lv02d_remove_fs(struct lis3lv02d *lis3) +{ + sysfs_remove_group(&lis3->pdev->dev.kobj, &lis3lv02d_attribute_group); + platform_device_unregister(lis3->pdev); + if (lis3->pm_dev) { + /* Barrier after the sysfs remove */ + pm_runtime_barrier(lis3->pm_dev); + + /* SYSFS may have left chip running. Turn off if necessary */ + if (!pm_runtime_suspended(lis3->pm_dev)) + lis3lv02d_poweroff(&lis3_dev); + + pm_runtime_disable(lis3->pm_dev); + pm_runtime_set_suspended(lis3->pm_dev); + } + kfree(lis3->reg_cache); + return 0; +} +EXPORT_SYMBOL_GPL(lis3lv02d_remove_fs); + +static void lis3lv02d_8b_configure(struct lis3lv02d *dev, + struct lis3lv02d_platform_data *p) +{ + int err; + int ctrl2 = p->hipass_ctrl; + + if (p->click_flags) { + dev->write(dev, CLICK_CFG, p->click_flags); + dev->write(dev, CLICK_TIMELIMIT, p->click_time_limit); + dev->write(dev, CLICK_LATENCY, p->click_latency); + dev->write(dev, CLICK_WINDOW, p->click_window); + dev->write(dev, CLICK_THSZ, p->click_thresh_z & 0xf); + dev->write(dev, CLICK_THSY_X, + (p->click_thresh_x & 0xf) | + (p->click_thresh_y << 4)); + + if (dev->idev) { + struct input_dev *input_dev = lis3_dev.idev->input; + input_set_capability(input_dev, EV_KEY, BTN_X); + input_set_capability(input_dev, EV_KEY, BTN_Y); + input_set_capability(input_dev, EV_KEY, BTN_Z); + } + } + + if (p->wakeup_flags) { + dev->write(dev, FF_WU_CFG_1, p->wakeup_flags); + dev->write(dev, FF_WU_THS_1, p->wakeup_thresh & 0x7f); + /* pdata value + 1 to keep this backward compatible*/ + dev->write(dev, FF_WU_DURATION_1, p->duration1 + 1); + ctrl2 ^= HP_FF_WU1; /* Xor to keep compatible with old pdata*/ + } + + if (p->wakeup_flags2) { + dev->write(dev, FF_WU_CFG_2, p->wakeup_flags2); + dev->write(dev, FF_WU_THS_2, p->wakeup_thresh2 & 0x7f); + /* pdata value + 1 to keep this backward compatible*/ + dev->write(dev, FF_WU_DURATION_2, p->duration2 + 1); + ctrl2 ^= HP_FF_WU2; /* Xor to keep compatible with old pdata*/ + } + /* Configure hipass filters */ + dev->write(dev, CTRL_REG2, ctrl2); + + if (p->irq2) { + err = request_threaded_irq(p->irq2, + NULL, + lis302dl_interrupt_thread2_8b, + IRQF_TRIGGER_RISING | IRQF_ONESHOT | + (p->irq_flags2 & IRQF_TRIGGER_MASK), + DRIVER_NAME, &lis3_dev); + if (err < 0) + pr_err("No second IRQ. Limited functionality\n"); + } +} + +/* + * Initialise the accelerometer and the various subsystems. + * Should be rather independent of the bus system. + */ +int lis3lv02d_init_device(struct lis3lv02d *dev) +{ + int err; + irq_handler_t thread_fn; + int irq_flags = 0; + + dev->whoami = lis3lv02d_read_8(dev, WHO_AM_I); + + switch (dev->whoami) { + case WAI_12B: + pr_info("12 bits sensor found\n"); + dev->read_data = lis3lv02d_read_12; + dev->mdps_max_val = 2048; + dev->pwron_delay = LIS3_PWRON_DELAY_WAI_12B; + dev->odrs = lis3_12_rates; + dev->odr_mask = CTRL1_DF0 | CTRL1_DF1; + dev->scale = LIS3_SENSITIVITY_12B; + dev->regs = lis3_wai12_regs; + dev->regs_size = ARRAY_SIZE(lis3_wai12_regs); + break; + case WAI_8B: + pr_info("8 bits sensor found\n"); + dev->read_data = lis3lv02d_read_8; + dev->mdps_max_val = 128; + dev->pwron_delay = LIS3_PWRON_DELAY_WAI_8B; + dev->odrs = lis3_8_rates; + dev->odr_mask = CTRL1_DR; + dev->scale = LIS3_SENSITIVITY_8B; + dev->regs = lis3_wai8_regs; + dev->regs_size = ARRAY_SIZE(lis3_wai8_regs); + break; + case WAI_3DC: + pr_info("8 bits 3DC sensor found\n"); + dev->read_data = lis3lv02d_read_8; + dev->mdps_max_val = 128; + dev->pwron_delay = LIS3_PWRON_DELAY_WAI_8B; + dev->odrs = lis3_3dc_rates; + dev->odr_mask = CTRL1_ODR0|CTRL1_ODR1|CTRL1_ODR2|CTRL1_ODR3; + dev->scale = LIS3_SENSITIVITY_8B; + break; + default: + pr_err("unknown sensor type 0x%X\n", dev->whoami); + return -EINVAL; + } + + dev->reg_cache = kzalloc(max(sizeof(lis3_wai8_regs), + sizeof(lis3_wai12_regs)), GFP_KERNEL); + + if (dev->reg_cache == NULL) { + printk(KERN_ERR DRIVER_NAME "out of memory\n"); + return -ENOMEM; + } + + mutex_init(&dev->mutex); + atomic_set(&dev->wake_thread, 0); + + lis3lv02d_add_fs(dev); + lis3lv02d_poweron(dev); + + if (dev->pm_dev) { + pm_runtime_set_active(dev->pm_dev); + pm_runtime_enable(dev->pm_dev); + } + + if (lis3lv02d_joystick_enable()) + pr_err("joystick initialization failed\n"); + + /* passing in platform specific data is purely optional and only + * used by the SPI transport layer at the moment */ + if (dev->pdata) { + struct lis3lv02d_platform_data *p = dev->pdata; + + if (dev->whoami == WAI_8B) + lis3lv02d_8b_configure(dev, p); + + irq_flags = p->irq_flags1 & IRQF_TRIGGER_MASK; + + dev->irq_cfg = p->irq_cfg; + if (p->irq_cfg) + dev->write(dev, CTRL_REG3, p->irq_cfg); + + if (p->default_rate) + lis3lv02d_set_odr(p->default_rate); + } + + /* bail if we did not get an IRQ from the bus layer */ + if (!dev->irq) { + pr_debug("No IRQ. Disabling /dev/freefall\n"); + goto out; + } + + /* + * The sensor can generate interrupts for free-fall and direction + * detection (distinguishable with FF_WU_SRC and DD_SRC) but to keep + * the things simple and _fast_ we activate it only for free-fall, so + * no need to read register (very slow with ACPI). For the same reason, + * we forbid shared interrupts. + * + * IRQF_TRIGGER_RISING seems pointless on HP laptops because the + * io-apic is not configurable (and generates a warning) but I keep it + * in case of support for other hardware. + */ + if (dev->pdata && dev->whoami == WAI_8B) + thread_fn = lis302dl_interrupt_thread1_8b; + else + thread_fn = NULL; + + err = request_threaded_irq(dev->irq, lis302dl_interrupt, + thread_fn, + IRQF_TRIGGER_RISING | IRQF_ONESHOT | + irq_flags, + DRIVER_NAME, &lis3_dev); + + if (err < 0) { + pr_err("Cannot get IRQ\n"); + goto out; + } + + if (misc_register(&lis3lv02d_misc_device)) + pr_err("misc_register failed\n"); +out: + return 0; +} +EXPORT_SYMBOL_GPL(lis3lv02d_init_device); + +MODULE_DESCRIPTION("ST LIS3LV02Dx three-axis digital accelerometer driver"); +MODULE_AUTHOR("Yan Burman, Eric Piel, Pavel Machek"); +MODULE_LICENSE("GPL"); diff --git a/drivers/misc/lis3lv02d/lis3lv02d.h b/drivers/misc/lis3lv02d/lis3lv02d.h new file mode 100644 index 00000000000..a1939589eb2 --- /dev/null +++ b/drivers/misc/lis3lv02d/lis3lv02d.h @@ -0,0 +1,291 @@ +/* + * lis3lv02d.h - ST LIS3LV02DL accelerometer driver + * + * Copyright (C) 2007-2008 Yan Burman + * Copyright (C) 2008-2009 Eric Piel + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#include <linux/platform_device.h> +#include <linux/input-polldev.h> +#include <linux/regulator/consumer.h> + +/* + * This driver tries to support the "digital" accelerometer chips from + * STMicroelectronics such as LIS3LV02DL, LIS302DL, LIS3L02DQ, LIS331DL, + * LIS35DE, or LIS202DL. They are very similar in terms of programming, with + * almost the same registers. In addition to differing on physical properties, + * they differ on the number of axes (2/3), precision (8/12 bits), and special + * features (freefall detection, click...). Unfortunately, not all the + * differences can be probed via a register. + * They can be connected either via I²C or SPI. + */ + +#include <linux/lis3lv02d.h> + +enum lis3_reg { + WHO_AM_I = 0x0F, + OFFSET_X = 0x16, + OFFSET_Y = 0x17, + OFFSET_Z = 0x18, + GAIN_X = 0x19, + GAIN_Y = 0x1A, + GAIN_Z = 0x1B, + CTRL_REG1 = 0x20, + CTRL_REG2 = 0x21, + CTRL_REG3 = 0x22, + CTRL_REG4 = 0x23, + HP_FILTER_RESET = 0x23, + STATUS_REG = 0x27, + OUTX_L = 0x28, + OUTX_H = 0x29, + OUTX = 0x29, + OUTY_L = 0x2A, + OUTY_H = 0x2B, + OUTY = 0x2B, + OUTZ_L = 0x2C, + OUTZ_H = 0x2D, + OUTZ = 0x2D, +}; + +enum lis302d_reg { + FF_WU_CFG_1 = 0x30, + FF_WU_SRC_1 = 0x31, + FF_WU_THS_1 = 0x32, + FF_WU_DURATION_1 = 0x33, + FF_WU_CFG_2 = 0x34, + FF_WU_SRC_2 = 0x35, + FF_WU_THS_2 = 0x36, + FF_WU_DURATION_2 = 0x37, + CLICK_CFG = 0x38, + CLICK_SRC = 0x39, + CLICK_THSY_X = 0x3B, + CLICK_THSZ = 0x3C, + CLICK_TIMELIMIT = 0x3D, + CLICK_LATENCY = 0x3E, + CLICK_WINDOW = 0x3F, +}; + +enum lis3lv02d_reg { + FF_WU_CFG = 0x30, + FF_WU_SRC = 0x31, + FF_WU_ACK = 0x32, + FF_WU_THS_L = 0x34, + FF_WU_THS_H = 0x35, + FF_WU_DURATION = 0x36, + DD_CFG = 0x38, + DD_SRC = 0x39, + DD_ACK = 0x3A, + DD_THSI_L = 0x3C, + DD_THSI_H = 0x3D, + DD_THSE_L = 0x3E, + DD_THSE_H = 0x3F, +}; + +enum lis3_who_am_i { + WAI_3DC = 0x33, /* 8 bits: LIS3DC, HP3DC */ + WAI_12B = 0x3A, /* 12 bits: LIS3LV02D[LQ]... */ + WAI_8B = 0x3B, /* 8 bits: LIS[23]02D[LQ]... */ + WAI_6B = 0x52, /* 6 bits: LIS331DLF - not supported */ +}; + +enum lis3lv02d_ctrl1_12b { + CTRL1_Xen = 0x01, + CTRL1_Yen = 0x02, + CTRL1_Zen = 0x04, + CTRL1_ST = 0x08, + CTRL1_DF0 = 0x10, + CTRL1_DF1 = 0x20, + CTRL1_PD0 = 0x40, + CTRL1_PD1 = 0x80, +}; + +/* Delta to ctrl1_12b version */ +enum lis3lv02d_ctrl1_8b { + CTRL1_STM = 0x08, + CTRL1_STP = 0x10, + CTRL1_FS = 0x20, + CTRL1_PD = 0x40, + CTRL1_DR = 0x80, +}; + +enum lis3lv02d_ctrl1_3dc { + CTRL1_ODR0 = 0x10, + CTRL1_ODR1 = 0x20, + CTRL1_ODR2 = 0x40, + CTRL1_ODR3 = 0x80, +}; + +enum lis3lv02d_ctrl2 { + CTRL2_DAS = 0x01, + CTRL2_SIM = 0x02, + CTRL2_DRDY = 0x04, + CTRL2_IEN = 0x08, + CTRL2_BOOT = 0x10, + CTRL2_BLE = 0x20, + CTRL2_BDU = 0x40, /* Block Data Update */ + CTRL2_FS = 0x80, /* Full Scale selection */ +}; + +enum lis3lv02d_ctrl4_3dc { + CTRL4_SIM = 0x01, + CTRL4_ST0 = 0x02, + CTRL4_ST1 = 0x04, + CTRL4_FS0 = 0x10, + CTRL4_FS1 = 0x20, +}; + +enum lis302d_ctrl2 { + HP_FF_WU2 = 0x08, + HP_FF_WU1 = 0x04, + CTRL2_BOOT_8B = 0x40, +}; + +enum lis3lv02d_ctrl3 { + CTRL3_CFS0 = 0x01, + CTRL3_CFS1 = 0x02, + CTRL3_FDS = 0x10, + CTRL3_HPFF = 0x20, + CTRL3_HPDD = 0x40, + CTRL3_ECK = 0x80, +}; + +enum lis3lv02d_status_reg { + STATUS_XDA = 0x01, + STATUS_YDA = 0x02, + STATUS_ZDA = 0x04, + STATUS_XYZDA = 0x08, + STATUS_XOR = 0x10, + STATUS_YOR = 0x20, + STATUS_ZOR = 0x40, + STATUS_XYZOR = 0x80, +}; + +enum lis3lv02d_ff_wu_cfg { + FF_WU_CFG_XLIE = 0x01, + FF_WU_CFG_XHIE = 0x02, + FF_WU_CFG_YLIE = 0x04, + FF_WU_CFG_YHIE = 0x08, + FF_WU_CFG_ZLIE = 0x10, + FF_WU_CFG_ZHIE = 0x20, + FF_WU_CFG_LIR = 0x40, + FF_WU_CFG_AOI = 0x80, +}; + +enum lis3lv02d_ff_wu_src { + FF_WU_SRC_XL = 0x01, + FF_WU_SRC_XH = 0x02, + FF_WU_SRC_YL = 0x04, + FF_WU_SRC_YH = 0x08, + FF_WU_SRC_ZL = 0x10, + FF_WU_SRC_ZH = 0x20, + FF_WU_SRC_IA = 0x40, +}; + +enum lis3lv02d_dd_cfg { + DD_CFG_XLIE = 0x01, + DD_CFG_XHIE = 0x02, + DD_CFG_YLIE = 0x04, + DD_CFG_YHIE = 0x08, + DD_CFG_ZLIE = 0x10, + DD_CFG_ZHIE = 0x20, + DD_CFG_LIR = 0x40, + DD_CFG_IEND = 0x80, +}; + +enum lis3lv02d_dd_src { + DD_SRC_XL = 0x01, + DD_SRC_XH = 0x02, + DD_SRC_YL = 0x04, + DD_SRC_YH = 0x08, + DD_SRC_ZL = 0x10, + DD_SRC_ZH = 0x20, + DD_SRC_IA = 0x40, +}; + +enum lis3lv02d_click_src_8b { + CLICK_SINGLE_X = 0x01, + CLICK_DOUBLE_X = 0x02, + CLICK_SINGLE_Y = 0x04, + CLICK_DOUBLE_Y = 0x08, + CLICK_SINGLE_Z = 0x10, + CLICK_DOUBLE_Z = 0x20, + CLICK_IA = 0x40, +}; + +enum lis3lv02d_reg_state { + LIS3_REG_OFF = 0x00, + LIS3_REG_ON = 0x01, +}; + +union axis_conversion { + struct { + int x, y, z; + }; + int as_array[3]; + +}; + +struct lis3lv02d { + void *bus_priv; /* used by the bus layer only */ + struct device *pm_dev; /* for pm_runtime purposes */ + int (*init) (struct lis3lv02d *lis3); + int (*write) (struct lis3lv02d *lis3, int reg, u8 val); + int (*read) (struct lis3lv02d *lis3, int reg, u8 *ret); + int (*blkread) (struct lis3lv02d *lis3, int reg, int len, u8 *ret); + int (*reg_ctrl) (struct lis3lv02d *lis3, bool state); + + int *odrs; /* Supported output data rates */ + u8 *regs; /* Regs to store / restore */ + int regs_size; + u8 *reg_cache; + bool regs_stored; + u8 odr_mask; /* ODR bit mask */ + u8 whoami; /* indicates measurement precision */ + s16 (*read_data) (struct lis3lv02d *lis3, int reg); + int mdps_max_val; + int pwron_delay; + int scale; /* + * relationship between 1 LBS and mG + * (1/1000th of earth gravity) + */ + + struct input_polled_dev *idev; /* input device */ + struct platform_device *pdev; /* platform device */ + struct regulator_bulk_data regulators[2]; + atomic_t count; /* interrupt count after last read */ + union axis_conversion ac; /* hw -> logical axis */ + int mapped_btns[3]; + + u32 irq; /* IRQ number */ + struct fasync_struct *async_queue; /* queue for the misc device */ + wait_queue_head_t misc_wait; /* Wait queue for the misc device */ + unsigned long misc_opened; /* bit0: whether the device is open */ + int data_ready_count[2]; + atomic_t wake_thread; + unsigned char irq_cfg; + + struct lis3lv02d_platform_data *pdata; /* for passing board config */ + struct mutex mutex; /* Serialize poll and selftest */ +}; + +int lis3lv02d_init_device(struct lis3lv02d *lis3); +int lis3lv02d_joystick_enable(void); +void lis3lv02d_joystick_disable(void); +void lis3lv02d_poweroff(struct lis3lv02d *lis3); +void lis3lv02d_poweron(struct lis3lv02d *lis3); +int lis3lv02d_remove_fs(struct lis3lv02d *lis3); + +extern struct lis3lv02d lis3_dev; diff --git a/drivers/misc/lis3lv02d/lis3lv02d_i2c.c b/drivers/misc/lis3lv02d/lis3lv02d_i2c.c new file mode 100644 index 00000000000..b20dfb4522d --- /dev/null +++ b/drivers/misc/lis3lv02d/lis3lv02d_i2c.c @@ -0,0 +1,279 @@ +/* + * drivers/hwmon/lis3lv02d_i2c.c + * + * Implements I2C interface for lis3lv02d (STMicroelectronics) accelerometer. + * Driver is based on corresponding SPI driver written by Daniel Mack + * (lis3lv02d_spi.c (C) 2009 Daniel Mack <daniel@caiaq.de> ). + * + * Copyright (C) 2009 Nokia Corporation and/or its subsidiary(-ies). + * + * Contact: Samu Onkalo <samu.p.onkalo@nokia.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA + * 02110-1301 USA + */ + +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/err.h> +#include <linux/i2c.h> +#include <linux/pm_runtime.h> +#include <linux/delay.h> +#include "lis3lv02d.h" + +#define DRV_NAME "lis3lv02d_i2c" + +static const char reg_vdd[] = "Vdd"; +static const char reg_vdd_io[] = "Vdd_IO"; + +static int lis3_reg_ctrl(struct lis3lv02d *lis3, bool state) +{ + int ret; + if (state == LIS3_REG_OFF) { + ret = regulator_bulk_disable(ARRAY_SIZE(lis3->regulators), + lis3->regulators); + } else { + ret = regulator_bulk_enable(ARRAY_SIZE(lis3->regulators), + lis3->regulators); + /* Chip needs time to wakeup. Not mentioned in datasheet */ + usleep_range(10000, 20000); + } + return ret; +} + +static inline s32 lis3_i2c_write(struct lis3lv02d *lis3, int reg, u8 value) +{ + struct i2c_client *c = lis3->bus_priv; + return i2c_smbus_write_byte_data(c, reg, value); +} + +static inline s32 lis3_i2c_read(struct lis3lv02d *lis3, int reg, u8 *v) +{ + struct i2c_client *c = lis3->bus_priv; + *v = i2c_smbus_read_byte_data(c, reg); + return 0; +} + +static inline s32 lis3_i2c_blockread(struct lis3lv02d *lis3, int reg, int len, + u8 *v) +{ + struct i2c_client *c = lis3->bus_priv; + reg |= (1 << 7); /* 7th bit enables address auto incrementation */ + return i2c_smbus_read_i2c_block_data(c, reg, len, v); +} + +static int lis3_i2c_init(struct lis3lv02d *lis3) +{ + u8 reg; + int ret; + + if (lis3->reg_ctrl) + lis3_reg_ctrl(lis3, LIS3_REG_ON); + + lis3->read(lis3, WHO_AM_I, ®); + if (reg != lis3->whoami) + printk(KERN_ERR "lis3: power on failure\n"); + + /* power up the device */ + ret = lis3->read(lis3, CTRL_REG1, ®); + if (ret < 0) + return ret; + + reg |= CTRL1_PD0 | CTRL1_Xen | CTRL1_Yen | CTRL1_Zen; + return lis3->write(lis3, CTRL_REG1, reg); +} + +/* Default axis mapping but it can be overwritten by platform data */ +static union axis_conversion lis3lv02d_axis_map = + { .as_array = { LIS3_DEV_X, LIS3_DEV_Y, LIS3_DEV_Z } }; + +static int __devinit lis3lv02d_i2c_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + int ret = 0; + struct lis3lv02d_platform_data *pdata = client->dev.platform_data; + + if (pdata) { + /* Regulator control is optional */ + if (pdata->driver_features & LIS3_USE_REGULATOR_CTRL) + lis3_dev.reg_ctrl = lis3_reg_ctrl; + + if ((pdata->driver_features & LIS3_USE_BLOCK_READ) && + (i2c_check_functionality(client->adapter, + I2C_FUNC_SMBUS_I2C_BLOCK))) + lis3_dev.blkread = lis3_i2c_blockread; + + if (pdata->axis_x) + lis3lv02d_axis_map.x = pdata->axis_x; + + if (pdata->axis_y) + lis3lv02d_axis_map.y = pdata->axis_y; + + if (pdata->axis_z) + lis3lv02d_axis_map.z = pdata->axis_z; + + if (pdata->setup_resources) + ret = pdata->setup_resources(); + + if (ret) + goto fail; + } + + if (lis3_dev.reg_ctrl) { + lis3_dev.regulators[0].supply = reg_vdd; + lis3_dev.regulators[1].supply = reg_vdd_io; + ret = regulator_bulk_get(&client->dev, + ARRAY_SIZE(lis3_dev.regulators), + lis3_dev.regulators); + if (ret < 0) + goto fail; + } + + lis3_dev.pdata = pdata; + lis3_dev.bus_priv = client; + lis3_dev.init = lis3_i2c_init; + lis3_dev.read = lis3_i2c_read; + lis3_dev.write = lis3_i2c_write; + lis3_dev.irq = client->irq; + lis3_dev.ac = lis3lv02d_axis_map; + lis3_dev.pm_dev = &client->dev; + + i2c_set_clientdata(client, &lis3_dev); + + /* Provide power over the init call */ + if (lis3_dev.reg_ctrl) + lis3_reg_ctrl(&lis3_dev, LIS3_REG_ON); + + ret = lis3lv02d_init_device(&lis3_dev); + + if (lis3_dev.reg_ctrl) + lis3_reg_ctrl(&lis3_dev, LIS3_REG_OFF); + + if (ret == 0) + return 0; +fail: + if (pdata && pdata->release_resources) + pdata->release_resources(); + return ret; +} + +static int __devexit lis3lv02d_i2c_remove(struct i2c_client *client) +{ + struct lis3lv02d *lis3 = i2c_get_clientdata(client); + struct lis3lv02d_platform_data *pdata = client->dev.platform_data; + + if (pdata && pdata->release_resources) + pdata->release_resources(); + + lis3lv02d_joystick_disable(); + lis3lv02d_remove_fs(&lis3_dev); + + if (lis3_dev.reg_ctrl) + regulator_bulk_free(ARRAY_SIZE(lis3->regulators), + lis3_dev.regulators); + return 0; +} + +#ifdef CONFIG_PM_SLEEP +static int lis3lv02d_i2c_suspend(struct device *dev) +{ + struct i2c_client *client = container_of(dev, struct i2c_client, dev); + struct lis3lv02d *lis3 = i2c_get_clientdata(client); + + if (!lis3->pdata || !lis3->pdata->wakeup_flags) + lis3lv02d_poweroff(lis3); + return 0; +} + +static int lis3lv02d_i2c_resume(struct device *dev) +{ + struct i2c_client *client = container_of(dev, struct i2c_client, dev); + struct lis3lv02d *lis3 = i2c_get_clientdata(client); + + /* + * pm_runtime documentation says that devices should always + * be powered on at resume. Pm_runtime turns them off after system + * wide resume is complete. + */ + if (!lis3->pdata || !lis3->pdata->wakeup_flags || + pm_runtime_suspended(dev)) + lis3lv02d_poweron(lis3); + + return 0; +} +#endif /* CONFIG_PM_SLEEP */ + +#ifdef CONFIG_PM_RUNTIME +static int lis3_i2c_runtime_suspend(struct device *dev) +{ + struct i2c_client *client = container_of(dev, struct i2c_client, dev); + struct lis3lv02d *lis3 = i2c_get_clientdata(client); + + lis3lv02d_poweroff(lis3); + return 0; +} + +static int lis3_i2c_runtime_resume(struct device *dev) +{ + struct i2c_client *client = container_of(dev, struct i2c_client, dev); + struct lis3lv02d *lis3 = i2c_get_clientdata(client); + + lis3lv02d_poweron(lis3); + return 0; +} +#endif /* CONFIG_PM_RUNTIME */ + +static const struct i2c_device_id lis3lv02d_id[] = { + {"lis3lv02d", 0 }, + {} +}; + +MODULE_DEVICE_TABLE(i2c, lis3lv02d_id); + +static const struct dev_pm_ops lis3_pm_ops = { + SET_SYSTEM_SLEEP_PM_OPS(lis3lv02d_i2c_suspend, + lis3lv02d_i2c_resume) + SET_RUNTIME_PM_OPS(lis3_i2c_runtime_suspend, + lis3_i2c_runtime_resume, + NULL) +}; + +static struct i2c_driver lis3lv02d_i2c_driver = { + .driver = { + .name = DRV_NAME, + .owner = THIS_MODULE, + .pm = &lis3_pm_ops, + }, + .probe = lis3lv02d_i2c_probe, + .remove = __devexit_p(lis3lv02d_i2c_remove), + .id_table = lis3lv02d_id, +}; + +static int __init lis3lv02d_init(void) +{ + return i2c_add_driver(&lis3lv02d_i2c_driver); +} + +static void __exit lis3lv02d_exit(void) +{ + i2c_del_driver(&lis3lv02d_i2c_driver); +} + +MODULE_AUTHOR("Nokia Corporation"); +MODULE_DESCRIPTION("lis3lv02d I2C interface"); +MODULE_LICENSE("GPL"); + +module_init(lis3lv02d_init); +module_exit(lis3lv02d_exit); diff --git a/drivers/misc/lis3lv02d/lis3lv02d_spi.c b/drivers/misc/lis3lv02d/lis3lv02d_spi.c new file mode 100644 index 00000000000..c1f8a8fbf69 --- /dev/null +++ b/drivers/misc/lis3lv02d/lis3lv02d_spi.c @@ -0,0 +1,145 @@ +/* + * lis3lv02d_spi - SPI glue layer for lis3lv02d + * + * Copyright (c) 2009 Daniel Mack <daniel@caiaq.de> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * publishhed by the Free Software Foundation. + */ + +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/err.h> +#include <linux/input.h> +#include <linux/interrupt.h> +#include <linux/workqueue.h> +#include <linux/spi/spi.h> +#include <linux/pm.h> + +#include "lis3lv02d.h" + +#define DRV_NAME "lis3lv02d_spi" +#define LIS3_SPI_READ 0x80 + +static int lis3_spi_read(struct lis3lv02d *lis3, int reg, u8 *v) +{ + struct spi_device *spi = lis3->bus_priv; + int ret = spi_w8r8(spi, reg | LIS3_SPI_READ); + if (ret < 0) + return -EINVAL; + + *v = (u8) ret; + return 0; +} + +static int lis3_spi_write(struct lis3lv02d *lis3, int reg, u8 val) +{ + u8 tmp[2] = { reg, val }; + struct spi_device *spi = lis3->bus_priv; + return spi_write(spi, tmp, sizeof(tmp)); +} + +static int lis3_spi_init(struct lis3lv02d *lis3) +{ + u8 reg; + int ret; + + /* power up the device */ + ret = lis3->read(lis3, CTRL_REG1, ®); + if (ret < 0) + return ret; + + reg |= CTRL1_PD0 | CTRL1_Xen | CTRL1_Yen | CTRL1_Zen; + return lis3->write(lis3, CTRL_REG1, reg); +} + +static union axis_conversion lis3lv02d_axis_normal = + { .as_array = { 1, 2, 3 } }; + +static int __devinit lis302dl_spi_probe(struct spi_device *spi) +{ + int ret; + + spi->bits_per_word = 8; + spi->mode = SPI_MODE_0; + ret = spi_setup(spi); + if (ret < 0) + return ret; + + lis3_dev.bus_priv = spi; + lis3_dev.init = lis3_spi_init; + lis3_dev.read = lis3_spi_read; + lis3_dev.write = lis3_spi_write; + lis3_dev.irq = spi->irq; + lis3_dev.ac = lis3lv02d_axis_normal; + lis3_dev.pdata = spi->dev.platform_data; + spi_set_drvdata(spi, &lis3_dev); + + return lis3lv02d_init_device(&lis3_dev); +} + +static int __devexit lis302dl_spi_remove(struct spi_device *spi) +{ + struct lis3lv02d *lis3 = spi_get_drvdata(spi); + lis3lv02d_joystick_disable(); + lis3lv02d_poweroff(lis3); + + return lis3lv02d_remove_fs(&lis3_dev); +} + +#ifdef CONFIG_PM_SLEEP +static int lis3lv02d_spi_suspend(struct device *dev) +{ + struct spi_device *spi = to_spi_device(dev); + struct lis3lv02d *lis3 = spi_get_drvdata(spi); + + if (!lis3->pdata || !lis3->pdata->wakeup_flags) + lis3lv02d_poweroff(&lis3_dev); + + return 0; +} + +static int lis3lv02d_spi_resume(struct device *dev) +{ + struct spi_device *spi = to_spi_device(dev); + struct lis3lv02d *lis3 = spi_get_drvdata(spi); + + if (!lis3->pdata || !lis3->pdata->wakeup_flags) + lis3lv02d_poweron(lis3); + + return 0; +} +#endif + +static SIMPLE_DEV_PM_OPS(lis3lv02d_spi_pm, lis3lv02d_spi_suspend, + lis3lv02d_spi_resume); + +static struct spi_driver lis302dl_spi_driver = { + .driver = { + .name = DRV_NAME, + .owner = THIS_MODULE, + .pm = &lis3lv02d_spi_pm, + }, + .probe = lis302dl_spi_probe, + .remove = __devexit_p(lis302dl_spi_remove), +}; + +static int __init lis302dl_init(void) +{ + return spi_register_driver(&lis302dl_spi_driver); +} + +static void __exit lis302dl_exit(void) +{ + spi_unregister_driver(&lis302dl_spi_driver); +} + +module_init(lis302dl_init); +module_exit(lis302dl_exit); + +MODULE_AUTHOR("Daniel Mack <daniel@caiaq.de>"); +MODULE_DESCRIPTION("lis3lv02d SPI glue layer"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("spi:" DRV_NAME); diff --git a/drivers/misc/pch_phub.c b/drivers/misc/pch_phub.c index 380ba806495..a19cb710a24 100644 --- a/drivers/misc/pch_phub.c +++ b/drivers/misc/pch_phub.c @@ -735,6 +735,7 @@ static struct pci_device_id pch_phub_pcidev_id[] = { { PCI_VDEVICE(ROHM, PCI_DEVICE_ID_ROHM_ML7213_PHUB), 2, }, { } }; +MODULE_DEVICE_TABLE(pci, pch_phub_pcidev_id); static struct pci_driver pch_phub_driver = { .name = "pch_phub", diff --git a/drivers/misc/sgi-gru/Makefile b/drivers/misc/sgi-gru/Makefile index 7c4c306dfa8..0003a1d56f7 100644 --- a/drivers/misc/sgi-gru/Makefile +++ b/drivers/misc/sgi-gru/Makefile @@ -1,6 +1,4 @@ -ifdef CONFIG_SGI_GRU_DEBUG - EXTRA_CFLAGS += -DDEBUG -endif +ccflags-$(CONFIG_SGI_GRU_DEBUG) := -DDEBUG obj-$(CONFIG_SGI_GRU) := gru.o gru-y := grufile.o grumain.o grufault.o grutlbpurge.o gruprocfs.o grukservices.o gruhandles.o grukdump.o diff --git a/drivers/misc/sgi-gru/grufile.c b/drivers/misc/sgi-gru/grufile.c index 28852dfa310..ecafa4ba238 100644 --- a/drivers/misc/sgi-gru/grufile.c +++ b/drivers/misc/sgi-gru/grufile.c @@ -348,15 +348,15 @@ static unsigned long gru_chiplet_cpu_to_mmr(int chiplet, int cpu, int *corep) static int gru_irq_count[GRU_CHIPLETS_PER_BLADE]; -static void gru_noop(unsigned int irq) +static void gru_noop(struct irq_data *d) { } static struct irq_chip gru_chip[GRU_CHIPLETS_PER_BLADE] = { [0 ... GRU_CHIPLETS_PER_BLADE - 1] { - .mask = gru_noop, - .unmask = gru_noop, - .ack = gru_noop + .irq_mask = gru_noop, + .irq_unmask = gru_noop, + .irq_ack = gru_noop } }; @@ -373,7 +373,7 @@ static int gru_chiplet_setup_tlb_irq(int chiplet, char *irq_name, if (gru_irq_count[chiplet] == 0) { gru_chip[chiplet].name = irq_name; - ret = set_irq_chip(irq, &gru_chip[chiplet]); + ret = irq_set_chip(irq, &gru_chip[chiplet]); if (ret) { printk(KERN_ERR "%s: set_irq_chip failed, errno=%d\n", GRU_DRIVER_ID_STR, -ret); diff --git a/drivers/misc/sgi-gru/grukservices.c b/drivers/misc/sgi-gru/grukservices.c index 34749ee88df..9e9bddaa95a 100644 --- a/drivers/misc/sgi-gru/grukservices.c +++ b/drivers/misc/sgi-gru/grukservices.c @@ -229,7 +229,7 @@ again: bid = blade_id < 0 ? uv_numa_blade_id() : blade_id; bs = gru_base[bid]; - /* Handle the case where migration occured while waiting for the sema */ + /* Handle the case where migration occurred while waiting for the sema */ down_read(&bs->bs_kgts_sema); if (blade_id < 0 && bid != uv_numa_blade_id()) { up_read(&bs->bs_kgts_sema); diff --git a/drivers/misc/sgi-gru/grutables.h b/drivers/misc/sgi-gru/grutables.h index 7a8b9068ea0..5c3ce245967 100644 --- a/drivers/misc/sgi-gru/grutables.h +++ b/drivers/misc/sgi-gru/grutables.h @@ -379,7 +379,7 @@ struct gru_thread_state { required for contest */ char ts_cch_req_slice;/* CCH packet slice */ char ts_blade; /* If >= 0, migrate context if - ref from diferent blade */ + ref from different blade */ char ts_force_cch_reload; char ts_cbr_idx[GRU_CBR_AU];/* CBR numbers of each allocated CB */ diff --git a/drivers/misc/spear13xx_pcie_gadget.c b/drivers/misc/spear13xx_pcie_gadget.c new file mode 100644 index 00000000000..ec3b8c91183 --- /dev/null +++ b/drivers/misc/spear13xx_pcie_gadget.c @@ -0,0 +1,908 @@ +/* + * drivers/misc/spear13xx_pcie_gadget.c + * + * Copyright (C) 2010 ST Microelectronics + * Pratyush Anand<pratyush.anand@st.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include <linux/clk.h> +#include <linux/slab.h> +#include <linux/delay.h> +#include <linux/io.h> +#include <linux/interrupt.h> +#include <linux/irq.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/pci_regs.h> +#include <linux/configfs.h> +#include <mach/pcie.h> +#include <mach/misc_regs.h> + +#define IN0_MEM_SIZE (200 * 1024 * 1024 - 1) +/* In current implementation address translation is done using IN0 only. + * So IN1 start address and IN0 end address has been kept same +*/ +#define IN1_MEM_SIZE (0 * 1024 * 1024 - 1) +#define IN_IO_SIZE (20 * 1024 * 1024 - 1) +#define IN_CFG0_SIZE (12 * 1024 * 1024 - 1) +#define IN_CFG1_SIZE (12 * 1024 * 1024 - 1) +#define IN_MSG_SIZE (12 * 1024 * 1024 - 1) +/* Keep default BAR size as 4K*/ +/* AORAM would be mapped by default*/ +#define INBOUND_ADDR_MASK (SPEAR13XX_SYSRAM1_SIZE - 1) + +#define INT_TYPE_NO_INT 0 +#define INT_TYPE_INTX 1 +#define INT_TYPE_MSI 2 +struct spear_pcie_gadget_config { + void __iomem *base; + void __iomem *va_app_base; + void __iomem *va_dbi_base; + char int_type[10]; + ulong requested_msi; + ulong configured_msi; + ulong bar0_size; + ulong bar0_rw_offset; + void __iomem *va_bar0_address; +}; + +struct pcie_gadget_target { + struct configfs_subsystem subsys; + struct spear_pcie_gadget_config config; +}; + +struct pcie_gadget_target_attr { + struct configfs_attribute attr; + ssize_t (*show)(struct spear_pcie_gadget_config *config, + char *buf); + ssize_t (*store)(struct spear_pcie_gadget_config *config, + const char *buf, + size_t count); +}; + +static void enable_dbi_access(struct pcie_app_reg __iomem *app_reg) +{ + /* Enable DBI access */ + writel(readl(&app_reg->slv_armisc) | (1 << AXI_OP_DBI_ACCESS_ID), + &app_reg->slv_armisc); + writel(readl(&app_reg->slv_awmisc) | (1 << AXI_OP_DBI_ACCESS_ID), + &app_reg->slv_awmisc); + +} + +static void disable_dbi_access(struct pcie_app_reg __iomem *app_reg) +{ + /* disable DBI access */ + writel(readl(&app_reg->slv_armisc) & ~(1 << AXI_OP_DBI_ACCESS_ID), + &app_reg->slv_armisc); + writel(readl(&app_reg->slv_awmisc) & ~(1 << AXI_OP_DBI_ACCESS_ID), + &app_reg->slv_awmisc); + +} + +static void spear_dbi_read_reg(struct spear_pcie_gadget_config *config, + int where, int size, u32 *val) +{ + struct pcie_app_reg __iomem *app_reg = config->va_app_base; + ulong va_address; + + /* Enable DBI access */ + enable_dbi_access(app_reg); + + va_address = (ulong)config->va_dbi_base + (where & ~0x3); + + *val = readl(va_address); + + if (size == 1) + *val = (*val >> (8 * (where & 3))) & 0xff; + else if (size == 2) + *val = (*val >> (8 * (where & 3))) & 0xffff; + + /* Disable DBI access */ + disable_dbi_access(app_reg); +} + +static void spear_dbi_write_reg(struct spear_pcie_gadget_config *config, + int where, int size, u32 val) +{ + struct pcie_app_reg __iomem *app_reg = config->va_app_base; + ulong va_address; + + /* Enable DBI access */ + enable_dbi_access(app_reg); + + va_address = (ulong)config->va_dbi_base + (where & ~0x3); + + if (size == 4) + writel(val, va_address); + else if (size == 2) + writew(val, va_address + (where & 2)); + else if (size == 1) + writeb(val, va_address + (where & 3)); + + /* Disable DBI access */ + disable_dbi_access(app_reg); +} + +#define PCI_FIND_CAP_TTL 48 + +static int pci_find_own_next_cap_ttl(struct spear_pcie_gadget_config *config, + u32 pos, int cap, int *ttl) +{ + u32 id; + + while ((*ttl)--) { + spear_dbi_read_reg(config, pos, 1, &pos); + if (pos < 0x40) + break; + pos &= ~3; + spear_dbi_read_reg(config, pos + PCI_CAP_LIST_ID, 1, &id); + if (id == 0xff) + break; + if (id == cap) + return pos; + pos += PCI_CAP_LIST_NEXT; + } + return 0; +} + +static int pci_find_own_next_cap(struct spear_pcie_gadget_config *config, + u32 pos, int cap) +{ + int ttl = PCI_FIND_CAP_TTL; + + return pci_find_own_next_cap_ttl(config, pos, cap, &ttl); +} + +static int pci_find_own_cap_start(struct spear_pcie_gadget_config *config, + u8 hdr_type) +{ + u32 status; + + spear_dbi_read_reg(config, PCI_STATUS, 2, &status); + if (!(status & PCI_STATUS_CAP_LIST)) + return 0; + + switch (hdr_type) { + case PCI_HEADER_TYPE_NORMAL: + case PCI_HEADER_TYPE_BRIDGE: + return PCI_CAPABILITY_LIST; + case PCI_HEADER_TYPE_CARDBUS: + return PCI_CB_CAPABILITY_LIST; + default: + return 0; + } + + return 0; +} + +/* + * Tell if a device supports a given PCI capability. + * Returns the address of the requested capability structure within the + * device's PCI configuration space or 0 in case the device does not + * support it. Possible values for @cap: + * + * %PCI_CAP_ID_PM Power Management + * %PCI_CAP_ID_AGP Accelerated Graphics Port + * %PCI_CAP_ID_VPD Vital Product Data + * %PCI_CAP_ID_SLOTID Slot Identification + * %PCI_CAP_ID_MSI Message Signalled Interrupts + * %PCI_CAP_ID_CHSWP CompactPCI HotSwap + * %PCI_CAP_ID_PCIX PCI-X + * %PCI_CAP_ID_EXP PCI Express + */ +static int pci_find_own_capability(struct spear_pcie_gadget_config *config, + int cap) +{ + u32 pos; + u32 hdr_type; + + spear_dbi_read_reg(config, PCI_HEADER_TYPE, 1, &hdr_type); + + pos = pci_find_own_cap_start(config, hdr_type); + if (pos) + pos = pci_find_own_next_cap(config, pos, cap); + + return pos; +} + +static irqreturn_t spear_pcie_gadget_irq(int irq, void *dev_id) +{ + return 0; +} + +/* + * configfs interfaces show/store functions + */ +static ssize_t pcie_gadget_show_link( + struct spear_pcie_gadget_config *config, + char *buf) +{ + struct pcie_app_reg __iomem *app_reg = config->va_app_base; + + if (readl(&app_reg->app_status_1) & ((u32)1 << XMLH_LINK_UP_ID)) + return sprintf(buf, "UP"); + else + return sprintf(buf, "DOWN"); +} + +static ssize_t pcie_gadget_store_link( + struct spear_pcie_gadget_config *config, + const char *buf, size_t count) +{ + struct pcie_app_reg __iomem *app_reg = config->va_app_base; + + if (sysfs_streq(buf, "UP")) + writel(readl(&app_reg->app_ctrl_0) | (1 << APP_LTSSM_ENABLE_ID), + &app_reg->app_ctrl_0); + else if (sysfs_streq(buf, "DOWN")) + writel(readl(&app_reg->app_ctrl_0) + & ~(1 << APP_LTSSM_ENABLE_ID), + &app_reg->app_ctrl_0); + else + return -EINVAL; + return count; +} + +static ssize_t pcie_gadget_show_int_type( + struct spear_pcie_gadget_config *config, + char *buf) +{ + return sprintf(buf, "%s", config->int_type); +} + +static ssize_t pcie_gadget_store_int_type( + struct spear_pcie_gadget_config *config, + const char *buf, size_t count) +{ + u32 cap, vec, flags; + ulong vector; + + if (sysfs_streq(buf, "INTA")) + spear_dbi_write_reg(config, PCI_INTERRUPT_LINE, 1, 1); + + else if (sysfs_streq(buf, "MSI")) { + vector = config->requested_msi; + vec = 0; + while (vector > 1) { + vector /= 2; + vec++; + } + spear_dbi_write_reg(config, PCI_INTERRUPT_LINE, 1, 0); + cap = pci_find_own_capability(config, PCI_CAP_ID_MSI); + spear_dbi_read_reg(config, cap + PCI_MSI_FLAGS, 1, &flags); + flags &= ~PCI_MSI_FLAGS_QMASK; + flags |= vec << 1; + spear_dbi_write_reg(config, cap + PCI_MSI_FLAGS, 1, flags); + } else + return -EINVAL; + + strcpy(config->int_type, buf); + + return count; +} + +static ssize_t pcie_gadget_show_no_of_msi( + struct spear_pcie_gadget_config *config, + char *buf) +{ + struct pcie_app_reg __iomem *app_reg = config->va_app_base; + u32 cap, vec, flags; + ulong vector; + + if ((readl(&app_reg->msg_status) & (1 << CFG_MSI_EN_ID)) + != (1 << CFG_MSI_EN_ID)) + vector = 0; + else { + cap = pci_find_own_capability(config, PCI_CAP_ID_MSI); + spear_dbi_read_reg(config, cap + PCI_MSI_FLAGS, 1, &flags); + flags &= ~PCI_MSI_FLAGS_QSIZE; + vec = flags >> 4; + vector = 1; + while (vec--) + vector *= 2; + } + config->configured_msi = vector; + + return sprintf(buf, "%lu", vector); +} + +static ssize_t pcie_gadget_store_no_of_msi( + struct spear_pcie_gadget_config *config, + const char *buf, size_t count) +{ + if (strict_strtoul(buf, 0, &config->requested_msi)) + return -EINVAL; + if (config->requested_msi > 32) + config->requested_msi = 32; + + return count; +} + +static ssize_t pcie_gadget_store_inta( + struct spear_pcie_gadget_config *config, + const char *buf, size_t count) +{ + struct pcie_app_reg __iomem *app_reg = config->va_app_base; + ulong en; + + if (strict_strtoul(buf, 0, &en)) + return -EINVAL; + + if (en) + writel(readl(&app_reg->app_ctrl_0) | (1 << SYS_INT_ID), + &app_reg->app_ctrl_0); + else + writel(readl(&app_reg->app_ctrl_0) & ~(1 << SYS_INT_ID), + &app_reg->app_ctrl_0); + + return count; +} + +static ssize_t pcie_gadget_store_send_msi( + struct spear_pcie_gadget_config *config, + const char *buf, size_t count) +{ + struct pcie_app_reg __iomem *app_reg = config->va_app_base; + ulong vector; + u32 ven_msi; + + if (strict_strtoul(buf, 0, &vector)) + return -EINVAL; + + if (!config->configured_msi) + return -EINVAL; + + if (vector >= config->configured_msi) + return -EINVAL; + + ven_msi = readl(&app_reg->ven_msi_1); + ven_msi &= ~VEN_MSI_FUN_NUM_MASK; + ven_msi |= 0 << VEN_MSI_FUN_NUM_ID; + ven_msi &= ~VEN_MSI_TC_MASK; + ven_msi |= 0 << VEN_MSI_TC_ID; + ven_msi &= ~VEN_MSI_VECTOR_MASK; + ven_msi |= vector << VEN_MSI_VECTOR_ID; + + /* generating interrupt for msi vector */ + ven_msi |= VEN_MSI_REQ_EN; + writel(ven_msi, &app_reg->ven_msi_1); + udelay(1); + ven_msi &= ~VEN_MSI_REQ_EN; + writel(ven_msi, &app_reg->ven_msi_1); + + return count; +} + +static ssize_t pcie_gadget_show_vendor_id( + struct spear_pcie_gadget_config *config, + char *buf) +{ + u32 id; + + spear_dbi_read_reg(config, PCI_VENDOR_ID, 2, &id); + + return sprintf(buf, "%x", id); +} + +static ssize_t pcie_gadget_store_vendor_id( + struct spear_pcie_gadget_config *config, + const char *buf, size_t count) +{ + ulong id; + + if (strict_strtoul(buf, 0, &id)) + return -EINVAL; + + spear_dbi_write_reg(config, PCI_VENDOR_ID, 2, id); + + return count; +} + +static ssize_t pcie_gadget_show_device_id( + struct spear_pcie_gadget_config *config, + char *buf) +{ + u32 id; + + spear_dbi_read_reg(config, PCI_DEVICE_ID, 2, &id); + + return sprintf(buf, "%x", id); +} + +static ssize_t pcie_gadget_store_device_id( + struct spear_pcie_gadget_config *config, + const char *buf, size_t count) +{ + ulong id; + + if (strict_strtoul(buf, 0, &id)) + return -EINVAL; + + spear_dbi_write_reg(config, PCI_DEVICE_ID, 2, id); + + return count; +} + +static ssize_t pcie_gadget_show_bar0_size( + struct spear_pcie_gadget_config *config, + char *buf) +{ + return sprintf(buf, "%lx", config->bar0_size); +} + +static ssize_t pcie_gadget_store_bar0_size( + struct spear_pcie_gadget_config *config, + const char *buf, size_t count) +{ + ulong size; + u32 pos, pos1; + u32 no_of_bit = 0; + + if (strict_strtoul(buf, 0, &size)) + return -EINVAL; + /* min bar size is 256 */ + if (size <= 0x100) + size = 0x100; + /* max bar size is 1MB*/ + else if (size >= 0x100000) + size = 0x100000; + else { + pos = 0; + pos1 = 0; + while (pos < 21) { + pos = find_next_bit((ulong *)&size, 21, pos); + if (pos != 21) + pos1 = pos + 1; + pos++; + no_of_bit++; + } + if (no_of_bit == 2) + pos1--; + + size = 1 << pos1; + } + config->bar0_size = size; + spear_dbi_write_reg(config, PCIE_BAR0_MASK_REG, 4, size - 1); + + return count; +} + +static ssize_t pcie_gadget_show_bar0_address( + struct spear_pcie_gadget_config *config, + char *buf) +{ + struct pcie_app_reg __iomem *app_reg = config->va_app_base; + + u32 address = readl(&app_reg->pim0_mem_addr_start); + + return sprintf(buf, "%x", address); +} + +static ssize_t pcie_gadget_store_bar0_address( + struct spear_pcie_gadget_config *config, + const char *buf, size_t count) +{ + struct pcie_app_reg __iomem *app_reg = config->va_app_base; + ulong address; + + if (strict_strtoul(buf, 0, &address)) + return -EINVAL; + + address &= ~(config->bar0_size - 1); + if (config->va_bar0_address) + iounmap(config->va_bar0_address); + config->va_bar0_address = ioremap(address, config->bar0_size); + if (!config->va_bar0_address) + return -ENOMEM; + + writel(address, &app_reg->pim0_mem_addr_start); + + return count; +} + +static ssize_t pcie_gadget_show_bar0_rw_offset( + struct spear_pcie_gadget_config *config, + char *buf) +{ + return sprintf(buf, "%lx", config->bar0_rw_offset); +} + +static ssize_t pcie_gadget_store_bar0_rw_offset( + struct spear_pcie_gadget_config *config, + const char *buf, size_t count) +{ + ulong offset; + + if (strict_strtoul(buf, 0, &offset)) + return -EINVAL; + + if (offset % 4) + return -EINVAL; + + config->bar0_rw_offset = offset; + + return count; +} + +static ssize_t pcie_gadget_show_bar0_data( + struct spear_pcie_gadget_config *config, + char *buf) +{ + ulong data; + + if (!config->va_bar0_address) + return -ENOMEM; + + data = readl((ulong)config->va_bar0_address + config->bar0_rw_offset); + + return sprintf(buf, "%lx", data); +} + +static ssize_t pcie_gadget_store_bar0_data( + struct spear_pcie_gadget_config *config, + const char *buf, size_t count) +{ + ulong data; + + if (strict_strtoul(buf, 0, &data)) + return -EINVAL; + + if (!config->va_bar0_address) + return -ENOMEM; + + writel(data, (ulong)config->va_bar0_address + config->bar0_rw_offset); + + return count; +} + +/* + * Attribute definitions. + */ + +#define PCIE_GADGET_TARGET_ATTR_RO(_name) \ +static struct pcie_gadget_target_attr pcie_gadget_target_##_name = \ + __CONFIGFS_ATTR(_name, S_IRUGO, pcie_gadget_show_##_name, NULL) + +#define PCIE_GADGET_TARGET_ATTR_WO(_name) \ +static struct pcie_gadget_target_attr pcie_gadget_target_##_name = \ + __CONFIGFS_ATTR(_name, S_IWUSR, NULL, pcie_gadget_store_##_name) + +#define PCIE_GADGET_TARGET_ATTR_RW(_name) \ +static struct pcie_gadget_target_attr pcie_gadget_target_##_name = \ + __CONFIGFS_ATTR(_name, S_IRUGO | S_IWUSR, pcie_gadget_show_##_name, \ + pcie_gadget_store_##_name) +PCIE_GADGET_TARGET_ATTR_RW(link); +PCIE_GADGET_TARGET_ATTR_RW(int_type); +PCIE_GADGET_TARGET_ATTR_RW(no_of_msi); +PCIE_GADGET_TARGET_ATTR_WO(inta); +PCIE_GADGET_TARGET_ATTR_WO(send_msi); +PCIE_GADGET_TARGET_ATTR_RW(vendor_id); +PCIE_GADGET_TARGET_ATTR_RW(device_id); +PCIE_GADGET_TARGET_ATTR_RW(bar0_size); +PCIE_GADGET_TARGET_ATTR_RW(bar0_address); +PCIE_GADGET_TARGET_ATTR_RW(bar0_rw_offset); +PCIE_GADGET_TARGET_ATTR_RW(bar0_data); + +static struct configfs_attribute *pcie_gadget_target_attrs[] = { + &pcie_gadget_target_link.attr, + &pcie_gadget_target_int_type.attr, + &pcie_gadget_target_no_of_msi.attr, + &pcie_gadget_target_inta.attr, + &pcie_gadget_target_send_msi.attr, + &pcie_gadget_target_vendor_id.attr, + &pcie_gadget_target_device_id.attr, + &pcie_gadget_target_bar0_size.attr, + &pcie_gadget_target_bar0_address.attr, + &pcie_gadget_target_bar0_rw_offset.attr, + &pcie_gadget_target_bar0_data.attr, + NULL, +}; + +static struct pcie_gadget_target *to_target(struct config_item *item) +{ + return item ? + container_of(to_configfs_subsystem(to_config_group(item)), + struct pcie_gadget_target, subsys) : NULL; +} + +/* + * Item operations and type for pcie_gadget_target. + */ + +static ssize_t pcie_gadget_target_attr_show(struct config_item *item, + struct configfs_attribute *attr, + char *buf) +{ + ssize_t ret = -EINVAL; + struct pcie_gadget_target *target = to_target(item); + struct pcie_gadget_target_attr *t_attr = + container_of(attr, struct pcie_gadget_target_attr, attr); + + if (t_attr->show) + ret = t_attr->show(&target->config, buf); + return ret; +} + +static ssize_t pcie_gadget_target_attr_store(struct config_item *item, + struct configfs_attribute *attr, + const char *buf, + size_t count) +{ + ssize_t ret = -EINVAL; + struct pcie_gadget_target *target = to_target(item); + struct pcie_gadget_target_attr *t_attr = + container_of(attr, struct pcie_gadget_target_attr, attr); + + if (t_attr->store) + ret = t_attr->store(&target->config, buf, count); + return ret; +} + +static struct configfs_item_operations pcie_gadget_target_item_ops = { + .show_attribute = pcie_gadget_target_attr_show, + .store_attribute = pcie_gadget_target_attr_store, +}; + +static struct config_item_type pcie_gadget_target_type = { + .ct_attrs = pcie_gadget_target_attrs, + .ct_item_ops = &pcie_gadget_target_item_ops, + .ct_owner = THIS_MODULE, +}; + +static void spear13xx_pcie_device_init(struct spear_pcie_gadget_config *config) +{ + struct pcie_app_reg __iomem *app_reg = config->va_app_base; + + /*setup registers for outbound translation */ + + writel(config->base, &app_reg->in0_mem_addr_start); + writel(app_reg->in0_mem_addr_start + IN0_MEM_SIZE, + &app_reg->in0_mem_addr_limit); + writel(app_reg->in0_mem_addr_limit + 1, &app_reg->in1_mem_addr_start); + writel(app_reg->in1_mem_addr_start + IN1_MEM_SIZE, + &app_reg->in1_mem_addr_limit); + writel(app_reg->in1_mem_addr_limit + 1, &app_reg->in_io_addr_start); + writel(app_reg->in_io_addr_start + IN_IO_SIZE, + &app_reg->in_io_addr_limit); + writel(app_reg->in_io_addr_limit + 1, &app_reg->in_cfg0_addr_start); + writel(app_reg->in_cfg0_addr_start + IN_CFG0_SIZE, + &app_reg->in_cfg0_addr_limit); + writel(app_reg->in_cfg0_addr_limit + 1, &app_reg->in_cfg1_addr_start); + writel(app_reg->in_cfg1_addr_start + IN_CFG1_SIZE, + &app_reg->in_cfg1_addr_limit); + writel(app_reg->in_cfg1_addr_limit + 1, &app_reg->in_msg_addr_start); + writel(app_reg->in_msg_addr_start + IN_MSG_SIZE, + &app_reg->in_msg_addr_limit); + + writel(app_reg->in0_mem_addr_start, &app_reg->pom0_mem_addr_start); + writel(app_reg->in1_mem_addr_start, &app_reg->pom1_mem_addr_start); + writel(app_reg->in_io_addr_start, &app_reg->pom_io_addr_start); + + /*setup registers for inbound translation */ + + /* Keep AORAM mapped at BAR0 as default */ + config->bar0_size = INBOUND_ADDR_MASK + 1; + spear_dbi_write_reg(config, PCIE_BAR0_MASK_REG, 4, INBOUND_ADDR_MASK); + spear_dbi_write_reg(config, PCI_BASE_ADDRESS_0, 4, 0xC); + config->va_bar0_address = ioremap(SPEAR13XX_SYSRAM1_BASE, + config->bar0_size); + + writel(SPEAR13XX_SYSRAM1_BASE, &app_reg->pim0_mem_addr_start); + writel(0, &app_reg->pim1_mem_addr_start); + writel(INBOUND_ADDR_MASK + 1, &app_reg->mem0_addr_offset_limit); + + writel(0x0, &app_reg->pim_io_addr_start); + writel(0x0, &app_reg->pim_io_addr_start); + writel(0x0, &app_reg->pim_rom_addr_start); + + writel(DEVICE_TYPE_EP | (1 << MISCTRL_EN_ID) + | ((u32)1 << REG_TRANSLATION_ENABLE), + &app_reg->app_ctrl_0); + /* disable all rx interrupts */ + writel(0, &app_reg->int_mask); + + /* Select INTA as default*/ + spear_dbi_write_reg(config, PCI_INTERRUPT_LINE, 1, 1); +} + +static int __devinit spear_pcie_gadget_probe(struct platform_device *pdev) +{ + struct resource *res0, *res1; + unsigned int status = 0; + int irq; + struct clk *clk; + static struct pcie_gadget_target *target; + struct spear_pcie_gadget_config *config; + struct config_item *cg_item; + struct configfs_subsystem *subsys; + + /* get resource for application registers*/ + + res0 = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!res0) { + dev_err(&pdev->dev, "no resource defined\n"); + return -EBUSY; + } + if (!request_mem_region(res0->start, resource_size(res0), + pdev->name)) { + dev_err(&pdev->dev, "pcie gadget region already claimed\n"); + return -EBUSY; + } + /* get resource for dbi registers*/ + + res1 = platform_get_resource(pdev, IORESOURCE_MEM, 1); + if (!res1) { + dev_err(&pdev->dev, "no resource defined\n"); + goto err_rel_res0; + } + if (!request_mem_region(res1->start, resource_size(res1), + pdev->name)) { + dev_err(&pdev->dev, "pcie gadget region already claimed\n"); + goto err_rel_res0; + } + + target = kzalloc(sizeof(*target), GFP_KERNEL); + if (!target) { + dev_err(&pdev->dev, "out of memory\n"); + status = -ENOMEM; + goto err_rel_res; + } + + cg_item = &target->subsys.su_group.cg_item; + sprintf(cg_item->ci_namebuf, "pcie_gadget.%d", pdev->id); + cg_item->ci_type = &pcie_gadget_target_type; + config = &target->config; + config->va_app_base = (void __iomem *)ioremap(res0->start, + resource_size(res0)); + if (!config->va_app_base) { + dev_err(&pdev->dev, "ioremap fail\n"); + status = -ENOMEM; + goto err_kzalloc; + } + + config->base = (void __iomem *)res1->start; + + config->va_dbi_base = (void __iomem *)ioremap(res1->start, + resource_size(res1)); + if (!config->va_dbi_base) { + dev_err(&pdev->dev, "ioremap fail\n"); + status = -ENOMEM; + goto err_iounmap_app; + } + + dev_set_drvdata(&pdev->dev, target); + + irq = platform_get_irq(pdev, 0); + if (irq < 0) { + dev_err(&pdev->dev, "no update irq?\n"); + status = irq; + goto err_iounmap; + } + + status = request_irq(irq, spear_pcie_gadget_irq, 0, pdev->name, NULL); + if (status) { + dev_err(&pdev->dev, "pcie gadget interrupt IRQ%d already \ + claimed\n", irq); + goto err_iounmap; + } + + /* Register configfs hooks */ + subsys = &target->subsys; + config_group_init(&subsys->su_group); + mutex_init(&subsys->su_mutex); + status = configfs_register_subsystem(subsys); + if (status) + goto err_irq; + + /* + * init basic pcie application registers + * do not enable clock if it is PCIE0.Ideally , all controller should + * have been independent from others with respect to clock. But PCIE1 + * and 2 depends on PCIE0.So PCIE0 clk is provided during board init. + */ + if (pdev->id == 1) { + /* + * Ideally CFG Clock should have been also enabled here. But + * it is done currently during board init routne + */ + clk = clk_get_sys("pcie1", NULL); + if (IS_ERR(clk)) { + pr_err("%s:couldn't get clk for pcie1\n", __func__); + goto err_irq; + } + if (clk_enable(clk)) { + pr_err("%s:couldn't enable clk for pcie1\n", __func__); + goto err_irq; + } + } else if (pdev->id == 2) { + /* + * Ideally CFG Clock should have been also enabled here. But + * it is done currently during board init routne + */ + clk = clk_get_sys("pcie2", NULL); + if (IS_ERR(clk)) { + pr_err("%s:couldn't get clk for pcie2\n", __func__); + goto err_irq; + } + if (clk_enable(clk)) { + pr_err("%s:couldn't enable clk for pcie2\n", __func__); + goto err_irq; + } + } + spear13xx_pcie_device_init(config); + + return 0; +err_irq: + free_irq(irq, NULL); +err_iounmap: + iounmap(config->va_dbi_base); +err_iounmap_app: + iounmap(config->va_app_base); +err_kzalloc: + kfree(config); +err_rel_res: + release_mem_region(res1->start, resource_size(res1)); +err_rel_res0: + release_mem_region(res0->start, resource_size(res0)); + return status; +} + +static int __devexit spear_pcie_gadget_remove(struct platform_device *pdev) +{ + struct resource *res0, *res1; + static struct pcie_gadget_target *target; + struct spear_pcie_gadget_config *config; + int irq; + + res0 = platform_get_resource(pdev, IORESOURCE_MEM, 0); + res1 = platform_get_resource(pdev, IORESOURCE_MEM, 1); + irq = platform_get_irq(pdev, 0); + target = dev_get_drvdata(&pdev->dev); + config = &target->config; + + free_irq(irq, NULL); + iounmap(config->va_dbi_base); + iounmap(config->va_app_base); + release_mem_region(res1->start, resource_size(res1)); + release_mem_region(res0->start, resource_size(res0)); + configfs_unregister_subsystem(&target->subsys); + kfree(target); + + return 0; +} + +static void spear_pcie_gadget_shutdown(struct platform_device *pdev) +{ +} + +static struct platform_driver spear_pcie_gadget_driver = { + .probe = spear_pcie_gadget_probe, + .remove = spear_pcie_gadget_remove, + .shutdown = spear_pcie_gadget_shutdown, + .driver = { + .name = "pcie-gadget-spear", + .bus = &platform_bus_type + }, +}; + +static int __init spear_pcie_gadget_init(void) +{ + return platform_driver_register(&spear_pcie_gadget_driver); +} +module_init(spear_pcie_gadget_init); + +static void __exit spear_pcie_gadget_exit(void) +{ + platform_driver_unregister(&spear_pcie_gadget_driver); +} +module_exit(spear_pcie_gadget_exit); + +MODULE_ALIAS("pcie-gadget-spear"); +MODULE_AUTHOR("Pratyush Anand"); +MODULE_LICENSE("GPL"); diff --git a/drivers/misc/ti-st/st_kim.c b/drivers/misc/ti-st/st_kim.c index 9ee4c788aa6..b4488c8f6b2 100644 --- a/drivers/misc/ti-st/st_kim.c +++ b/drivers/misc/ti-st/st_kim.c @@ -649,7 +649,7 @@ static int kim_probe(struct platform_device *pdev) /* multiple devices could exist */ st_kim_devices[pdev->id] = pdev; } else { - /* platform's sure about existance of 1 device */ + /* platform's sure about existence of 1 device */ st_kim_devices[0] = pdev; } |