summaryrefslogtreecommitdiffstats
path: root/drivers/misc
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/misc')
-rw-r--r--drivers/misc/Kconfig31
-rw-r--r--drivers/misc/Makefile3
-rw-r--r--drivers/misc/bh1780gli.c273
-rw-r--r--drivers/misc/bmp085.c482
-rw-r--r--drivers/misc/enclosure.c7
-rw-r--r--drivers/misc/hmc6352.c166
-rw-r--r--drivers/misc/hpilo.c17
-rw-r--r--drivers/misc/hpilo.h8
8 files changed, 971 insertions, 16 deletions
diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig
index 9b089dfb173..0b591b65824 100644
--- a/drivers/misc/Kconfig
+++ b/drivers/misc/Kconfig
@@ -72,7 +72,7 @@ config ATMEL_TCLIB
config ATMEL_TCB_CLKSRC
bool "TC Block Clocksource"
- depends on ATMEL_TCLIB && GENERIC_TIME
+ depends on ATMEL_TCLIB
default y
help
Select this to get a high precision clocksource based on a
@@ -240,7 +240,7 @@ config CS5535_MFGPT_DEFAULT_IRQ
config CS5535_CLOCK_EVENT_SRC
tristate "CS5535/CS5536 high-res timer (MFGPT) events"
- depends on GENERIC_TIME && GENERIC_CLOCKEVENTS && CS5535_MFGPT
+ depends on GENERIC_CLOCKEVENTS && CS5535_MFGPT
help
This driver provides a clock event source based on the MFGPT
timer(s) in the CS5535 and CS5536 companion chips.
@@ -304,6 +304,23 @@ config SENSORS_TSL2550
This driver can also be built as a module. If so, the module
will be called tsl2550.
+config SENSORS_BH1780
+ tristate "ROHM BH1780GLI ambient light sensor"
+ depends on I2C && SYSFS
+ help
+ If you say yes here you get support for the ROHM BH1780GLI
+ ambient light sensor.
+
+ This driver can also be built as a module. If so, the module
+ will be called bh1780gli.
+
+config HMC6352
+ tristate "Honeywell HMC6352 compass"
+ depends on I2C
+ help
+ This driver provides support for the Honeywell HMC6352 compass,
+ providing configuration and heading data via sysfs.
+
config EP93XX_PWM
tristate "EP93xx PWM support"
depends on ARCH_EP93XX
@@ -363,6 +380,16 @@ config ARM_CHARLCD
line and the Linux version on the second line, but that's
still useful.
+config BMP085
+ tristate "BMP085 digital pressure sensor"
+ depends on I2C && SYSFS
+ help
+ If you say yes here you get support for the Bosch Sensortec
+ BMP086 digital pressure sensor.
+
+ To compile this driver as a module, choose M here: the
+ module will be called bmp085.
+
source "drivers/misc/c2port/Kconfig"
source "drivers/misc/eeprom/Kconfig"
source "drivers/misc/cb710/Kconfig"
diff --git a/drivers/misc/Makefile b/drivers/misc/Makefile
index 67552d6e932..255a80dc9d7 100644
--- a/drivers/misc/Makefile
+++ b/drivers/misc/Makefile
@@ -9,11 +9,13 @@ obj-$(CONFIG_AD525X_DPOT_SPI) += ad525x_dpot-spi.o
obj-$(CONFIG_ATMEL_PWM) += atmel_pwm.o
obj-$(CONFIG_ATMEL_SSC) += atmel-ssc.o
obj-$(CONFIG_ATMEL_TCLIB) += atmel_tclib.o
+obj-$(CONFIG_BMP085) += bmp085.o
obj-$(CONFIG_ICS932S401) += ics932s401.o
obj-$(CONFIG_LKDTM) += lkdtm.o
obj-$(CONFIG_TIFM_CORE) += tifm_core.o
obj-$(CONFIG_TIFM_7XX1) += tifm_7xx1.o
obj-$(CONFIG_PHANTOM) += phantom.o
+obj-$(CONFIG_SENSORS_BH1780) += bh1780gli.o
obj-$(CONFIG_SGI_IOC4) += ioc4.o
obj-$(CONFIG_ENCLOSURE_SERVICES) += enclosure.o
obj-$(CONFIG_KGDB_TESTS) += kgdbts.o
@@ -28,6 +30,7 @@ obj-$(CONFIG_DS1682) += ds1682.o
obj-$(CONFIG_TI_DAC7512) += ti_dac7512.o
obj-$(CONFIG_C2PORT) += c2port/
obj-$(CONFIG_IWMC3200TOP) += iwmc3200top/
+obj-$(CONFIG_HMC6352) += hmc6352.o
obj-y += eeprom/
obj-y += cb710/
obj-$(CONFIG_VMWARE_BALLOON) += vmware_balloon.o
diff --git a/drivers/misc/bh1780gli.c b/drivers/misc/bh1780gli.c
new file mode 100644
index 00000000000..714c6b48731
--- /dev/null
+++ b/drivers/misc/bh1780gli.c
@@ -0,0 +1,273 @@
+/*
+ * bh1780gli.c
+ * ROHM Ambient Light Sensor Driver
+ *
+ * Copyright (C) 2010 Texas Instruments
+ * Author: Hemanth V <hemanthv@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+#include <linux/i2c.h>
+#include <linux/slab.h>
+#include <linux/mutex.h>
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+
+#define BH1780_REG_CONTROL 0x80
+#define BH1780_REG_PARTID 0x8A
+#define BH1780_REG_MANFID 0x8B
+#define BH1780_REG_DLOW 0x8C
+#define BH1780_REG_DHIGH 0x8D
+
+#define BH1780_REVMASK (0xf)
+#define BH1780_POWMASK (0x3)
+#define BH1780_POFF (0x0)
+#define BH1780_PON (0x3)
+
+/* power on settling time in ms */
+#define BH1780_PON_DELAY 2
+
+struct bh1780_data {
+ struct i2c_client *client;
+ int power_state;
+ /* lock for sysfs operations */
+ struct mutex lock;
+};
+
+static int bh1780_write(struct bh1780_data *ddata, u8 reg, u8 val, char *msg)
+{
+ int ret = i2c_smbus_write_byte_data(ddata->client, reg, val);
+ if (ret < 0)
+ dev_err(&ddata->client->dev,
+ "i2c_smbus_write_byte_data failed error %d\
+ Register (%s)\n", ret, msg);
+ return ret;
+}
+
+static int bh1780_read(struct bh1780_data *ddata, u8 reg, char *msg)
+{
+ int ret = i2c_smbus_read_byte_data(ddata->client, reg);
+ if (ret < 0)
+ dev_err(&ddata->client->dev,
+ "i2c_smbus_read_byte_data failed error %d\
+ Register (%s)\n", ret, msg);
+ return ret;
+}
+
+static ssize_t bh1780_show_lux(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct platform_device *pdev = to_platform_device(dev);
+ struct bh1780_data *ddata = platform_get_drvdata(pdev);
+ int lsb, msb;
+
+ lsb = bh1780_read(ddata, BH1780_REG_DLOW, "DLOW");
+ if (lsb < 0)
+ return lsb;
+
+ msb = bh1780_read(ddata, BH1780_REG_DHIGH, "DHIGH");
+ if (msb < 0)
+ return msb;
+
+ return sprintf(buf, "%d\n", (msb << 8) | lsb);
+}
+
+static ssize_t bh1780_show_power_state(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ struct platform_device *pdev = to_platform_device(dev);
+ struct bh1780_data *ddata = platform_get_drvdata(pdev);
+ int state;
+
+ state = bh1780_read(ddata, BH1780_REG_CONTROL, "CONTROL");
+ if (state < 0)
+ return state;
+
+ return sprintf(buf, "%d\n", state & BH1780_POWMASK);
+}
+
+static ssize_t bh1780_store_power_state(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct platform_device *pdev = to_platform_device(dev);
+ struct bh1780_data *ddata = platform_get_drvdata(pdev);
+ unsigned long val;
+ int error;
+
+ error = strict_strtoul(buf, 0, &val);
+ if (error)
+ return error;
+
+ if (val < BH1780_POFF || val > BH1780_PON)
+ return -EINVAL;
+
+ mutex_lock(&ddata->lock);
+
+ error = bh1780_write(ddata, BH1780_REG_CONTROL, val, "CONTROL");
+ if (error < 0) {
+ mutex_unlock(&ddata->lock);
+ return error;
+ }
+
+ msleep(BH1780_PON_DELAY);
+ ddata->power_state = val;
+ mutex_unlock(&ddata->lock);
+
+ return count;
+}
+
+static DEVICE_ATTR(lux, S_IRUGO, bh1780_show_lux, NULL);
+
+static DEVICE_ATTR(power_state, S_IWUSR | S_IRUGO,
+ bh1780_show_power_state, bh1780_store_power_state);
+
+static struct attribute *bh1780_attributes[] = {
+ &dev_attr_power_state.attr,
+ &dev_attr_lux.attr,
+ NULL
+};
+
+static const struct attribute_group bh1780_attr_group = {
+ .attrs = bh1780_attributes,
+};
+
+static int __devinit bh1780_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ int ret;
+ struct bh1780_data *ddata = NULL;
+ struct i2c_adapter *adapter = to_i2c_adapter(client->dev.parent);
+
+ if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE)) {
+ ret = -EIO;
+ goto err_op_failed;
+ }
+
+ ddata = kzalloc(sizeof(struct bh1780_data), GFP_KERNEL);
+ if (ddata == NULL) {
+ ret = -ENOMEM;
+ goto err_op_failed;
+ }
+
+ ddata->client = client;
+ i2c_set_clientdata(client, ddata);
+
+ ret = bh1780_read(ddata, BH1780_REG_PARTID, "PART ID");
+ if (ret < 0)
+ goto err_op_failed;
+
+ dev_info(&client->dev, "Ambient Light Sensor, Rev : %d\n",
+ (ret & BH1780_REVMASK));
+
+ mutex_init(&ddata->lock);
+
+ ret = sysfs_create_group(&client->dev.kobj, &bh1780_attr_group);
+ if (ret)
+ goto err_op_failed;
+
+ return 0;
+
+err_op_failed:
+ kfree(ddata);
+ return ret;
+}
+
+static int __devexit bh1780_remove(struct i2c_client *client)
+{
+ struct bh1780_data *ddata;
+
+ ddata = i2c_get_clientdata(client);
+ sysfs_remove_group(&client->dev.kobj, &bh1780_attr_group);
+ i2c_set_clientdata(client, NULL);
+ kfree(ddata);
+
+ return 0;
+}
+
+#ifdef CONFIG_PM
+static int bh1780_suspend(struct i2c_client *client, pm_message_t mesg)
+{
+ struct bh1780_data *ddata;
+ int state, ret;
+
+ ddata = i2c_get_clientdata(client);
+ state = bh1780_read(ddata, BH1780_REG_CONTROL, "CONTROL");
+ if (state < 0)
+ return state;
+
+ ddata->power_state = state & BH1780_POWMASK;
+
+ ret = bh1780_write(ddata, BH1780_REG_CONTROL, BH1780_POFF,
+ "CONTROL");
+
+ if (ret < 0)
+ return ret;
+
+ return 0;
+}
+
+static int bh1780_resume(struct i2c_client *client)
+{
+ struct bh1780_data *ddata;
+ int state, ret;
+
+ ddata = i2c_get_clientdata(client);
+ state = ddata->power_state;
+
+ ret = bh1780_write(ddata, BH1780_REG_CONTROL, state,
+ "CONTROL");
+
+ if (ret < 0)
+ return ret;
+
+ return 0;
+}
+#else
+#define bh1780_suspend NULL
+#define bh1780_resume NULL
+#endif /* CONFIG_PM */
+
+static const struct i2c_device_id bh1780_id[] = {
+ { "bh1780", 0 },
+ { },
+};
+
+static struct i2c_driver bh1780_driver = {
+ .probe = bh1780_probe,
+ .remove = bh1780_remove,
+ .id_table = bh1780_id,
+ .suspend = bh1780_suspend,
+ .resume = bh1780_resume,
+ .driver = {
+ .name = "bh1780"
+ },
+};
+
+static int __init bh1780_init(void)
+{
+ return i2c_add_driver(&bh1780_driver);
+}
+
+static void __exit bh1780_exit(void)
+{
+ i2c_del_driver(&bh1780_driver);
+}
+
+module_init(bh1780_init)
+module_exit(bh1780_exit)
+
+MODULE_DESCRIPTION("BH1780GLI Ambient Light Sensor Driver");
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Hemanth V <hemanthv@ti.com>");
diff --git a/drivers/misc/bmp085.c b/drivers/misc/bmp085.c
new file mode 100644
index 00000000000..63ee4c1a531
--- /dev/null
+++ b/drivers/misc/bmp085.c
@@ -0,0 +1,482 @@
+/* Copyright (c) 2010 Christoph Mair <christoph.mair@gmail.com>
+
+ This driver supports the bmp085 digital barometric pressure
+ and temperature sensor from Bosch Sensortec. The datasheet
+ is avaliable from their website:
+ http://www.bosch-sensortec.com/content/language1/downloads/BST-BMP085-DS000-05.pdf
+
+ A pressure measurement is issued by reading from pressure0_input.
+ The return value ranges from 30000 to 110000 pascal with a resulution
+ of 1 pascal (0.01 millibar) which enables measurements from 9000m above
+ to 500m below sea level.
+
+ The temperature can be read from temp0_input. Values range from
+ -400 to 850 representing the ambient temperature in degree celsius
+ multiplied by 10.The resolution is 0.1 celsius.
+
+ Because ambient pressure is temperature dependent, a temperature
+ measurement will be executed automatically even if the user is reading
+ from pressure0_input. This happens if the last temperature measurement
+ has been executed more then one second ago.
+
+ To decrease RMS noise from pressure measurements, the bmp085 can
+ autonomously calculate the average of up to eight samples. This is
+ set up by writing to the oversampling sysfs file. Accepted values
+ are 0, 1, 2 and 3. 2^x when x is the value written to this file
+ specifies the number of samples used to calculate the ambient pressure.
+ RMS noise is specified with six pascal (without averaging) and decreases
+ down to 3 pascal when using an oversampling setting of 3.
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/i2c.h>
+#include <linux/slab.h>
+#include <linux/delay.h>
+
+
+#define BMP085_I2C_ADDRESS 0x77
+#define BMP085_CHIP_ID 0x55
+
+#define BMP085_CALIBRATION_DATA_START 0xAA
+#define BMP085_CALIBRATION_DATA_LENGTH 11 /* 16 bit values */
+#define BMP085_CHIP_ID_REG 0xD0
+#define BMP085_VERSION_REG 0xD1
+#define BMP085_CTRL_REG 0xF4
+#define BMP085_TEMP_MEASUREMENT 0x2E
+#define BMP085_PRESSURE_MEASUREMENT 0x34
+#define BMP085_CONVERSION_REGISTER_MSB 0xF6
+#define BMP085_CONVERSION_REGISTER_LSB 0xF7
+#define BMP085_CONVERSION_REGISTER_XLSB 0xF8
+#define BMP085_TEMP_CONVERSION_TIME 5
+
+#define BMP085_CLIENT_NAME "bmp085"
+
+
+static const unsigned short normal_i2c[] = { BMP085_I2C_ADDRESS,
+ I2C_CLIENT_END };
+
+struct bmp085_calibration_data {
+ s16 AC1, AC2, AC3;
+ u16 AC4, AC5, AC6;
+ s16 B1, B2;
+ s16 MB, MC, MD;
+};
+
+
+/* Each client has this additional data */
+struct bmp085_data {
+ struct i2c_client *client;
+ struct mutex lock;
+ struct bmp085_calibration_data calibration;
+ u32 raw_temperature;
+ u32 raw_pressure;
+ unsigned char oversampling_setting;
+ u32 last_temp_measurement;
+ s32 b6; /* calculated temperature correction coefficient */
+};
+
+
+static s32 bmp085_read_calibration_data(struct i2c_client *client)
+{
+ u16 tmp[BMP085_CALIBRATION_DATA_LENGTH];
+ struct bmp085_data *data = i2c_get_clientdata(client);
+ struct bmp085_calibration_data *cali = &(data->calibration);
+ s32 status = i2c_smbus_read_i2c_block_data(client,
+ BMP085_CALIBRATION_DATA_START,
+ BMP085_CALIBRATION_DATA_LENGTH*sizeof(u16),
+ (u8 *)tmp);
+ if (status < 0)
+ return status;
+
+ if (status != BMP085_CALIBRATION_DATA_LENGTH*sizeof(u16))
+ return -EIO;
+
+ cali->AC1 = be16_to_cpu(tmp[0]);
+ cali->AC2 = be16_to_cpu(tmp[1]);
+ cali->AC3 = be16_to_cpu(tmp[2]);
+ cali->AC4 = be16_to_cpu(tmp[3]);
+ cali->AC5 = be16_to_cpu(tmp[4]);
+ cali->AC6 = be16_to_cpu(tmp[5]);
+ cali->B1 = be16_to_cpu(tmp[6]);
+ cali->B2 = be16_to_cpu(tmp[7]);
+ cali->MB = be16_to_cpu(tmp[8]);
+ cali->MC = be16_to_cpu(tmp[9]);
+ cali->MD = be16_to_cpu(tmp[10]);
+ return 0;
+}
+
+
+static s32 bmp085_update_raw_temperature(struct bmp085_data *data)
+{
+ u16 tmp;
+ s32 status;
+
+ mutex_lock(&data->lock);
+ status = i2c_smbus_write_byte_data(data->client, BMP085_CTRL_REG,
+ BMP085_TEMP_MEASUREMENT);
+ if (status != 0) {
+ dev_err(&data->client->dev,
+ "Error while requesting temperature measurement.\n");
+ goto exit;
+ }
+ msleep(BMP085_TEMP_CONVERSION_TIME);
+
+ status = i2c_smbus_read_i2c_block_data(data->client,
+ BMP085_CONVERSION_REGISTER_MSB, sizeof(tmp), (u8 *)&tmp);
+ if (status < 0)
+ goto exit;
+ if (status != sizeof(tmp)) {
+ dev_err(&data->client->dev,
+ "Error while reading temperature measurement result\n");
+ status = -EIO;
+ goto exit;
+ }
+ data->raw_temperature = be16_to_cpu(tmp);
+ data->last_temp_measurement = jiffies;
+ status = 0; /* everything ok, return 0 */
+
+exit:
+ mutex_unlock(&data->lock);
+ return status;
+}
+
+static s32 bmp085_update_raw_pressure(struct bmp085_data *data)
+{
+ u32 tmp = 0;
+ s32 status;
+
+ mutex_lock(&data->lock);
+ status = i2c_smbus_write_byte_data(data->client, BMP085_CTRL_REG,
+ BMP085_PRESSURE_MEASUREMENT + (data->oversampling_setting<<6));
+ if (status != 0) {
+ dev_err(&data->client->dev,
+ "Error while requesting pressure measurement.\n");
+ goto exit;
+ }
+
+ /* wait for the end of conversion */
+ msleep(2+(3 << data->oversampling_setting));
+
+ /* copy data into a u32 (4 bytes), but skip the first byte. */
+ status = i2c_smbus_read_i2c_block_data(data->client,
+ BMP085_CONVERSION_REGISTER_MSB, 3, ((u8 *)&tmp)+1);
+ if (status < 0)
+ goto exit;
+ if (status != 3) {
+ dev_err(&data->client->dev,
+ "Error while reading pressure measurement results\n");
+ status = -EIO;
+ goto exit;
+ }
+ data->raw_pressure = be32_to_cpu((tmp));
+ data->raw_pressure >>= (8-data->oversampling_setting);
+ status = 0; /* everything ok, return 0 */
+
+exit:
+ mutex_unlock(&data->lock);
+ return status;
+}
+
+
+/*
+ * This function starts the temperature measurement and returns the value
+ * in tenth of a degree celsius.
+ */
+static s32 bmp085_get_temperature(struct bmp085_data *data, int *temperature)
+{
+ struct bmp085_calibration_data *cali = &data->calibration;
+ long x1, x2;
+ int status;
+
+ status = bmp085_update_raw_temperature(data);
+ if (status != 0)
+ goto exit;
+
+ x1 = ((data->raw_temperature - cali->AC6) * cali->AC5) >> 15;
+ x2 = (cali->MC << 11) / (x1 + cali->MD);
+ data->b6 = x1 + x2 - 4000;
+ /* if NULL just update b6. Used for pressure only measurements */
+ if (temperature != NULL)
+ *temperature = (x1+x2+8) >> 4;
+
+exit:
+ return status;;
+}
+
+/*
+ * This function starts the pressure measurement and returns the value
+ * in millibar. Since the pressure depends on the ambient temperature,
+ * a temperature measurement is executed if the last known value is older
+ * than one second.
+ */
+static s32 bmp085_get_pressure(struct bmp085_data *data, int *pressure)
+{
+ struct bmp085_calibration_data *cali = &data->calibration;
+ s32 x1, x2, x3, b3;
+ u32 b4, b7;
+ s32 p;
+ int status;
+
+ /* alt least every second force an update of the ambient temperature */
+ if (data->last_temp_measurement + 1*HZ < jiffies) {
+ status = bmp085_get_temperature(data, NULL);
+ if (status != 0)
+ goto exit;
+ }
+
+ status = bmp085_update_raw_pressure(data);
+ if (status != 0)
+ goto exit;
+
+ x1 = (data->b6 * data->b6) >> 12;
+ x1 *= cali->B2;
+ x1 >>= 11;
+
+ x2 = cali->AC2 * data->b6;
+ x2 >>= 11;
+
+ x3 = x1 + x2;
+
+ b3 = (((((s32)cali->AC1) * 4 + x3) << data->oversampling_setting) + 2);
+ b3 >>= 2;
+
+ x1 = (cali->AC3 * data->b6) >> 13;
+ x2 = (cali->B1 * ((data->b6 * data->b6) >> 12)) >> 16;
+ x3 = (x1 + x2 + 2) >> 2;
+ b4 = (cali->AC4 * (u32)(x3 + 32768)) >> 15;
+
+ b7 = ((u32)data->raw_pressure - b3) *
+ (50000 >> data->oversampling_setting);
+ p = ((b7 < 0x80000000) ? ((b7 << 1) / b4) : ((b7 / b4) * 2));
+
+ x1 = p >> 8;
+ x1 *= x1;
+ x1 = (x1 * 3038) >> 16;
+ x2 = (-7357 * p) >> 16;
+ p += (x1 + x2 + 3791) >> 4;
+
+ *pressure = p;
+
+exit:
+ return status;
+}
+
+/*
+ * This function sets the chip-internal oversampling. Valid values are 0..3.
+ * The chip will use 2^oversampling samples for internal averaging.
+ * This influences the measurement time and the accuracy; larger values
+ * increase both. The datasheet gives on overview on how measurement time,
+ * accuracy and noise correlate.
+ */
+static void bmp085_set_oversampling(struct bmp085_data *data,
+ unsigned char oversampling)
+{
+ if (oversampling > 3)
+ oversampling = 3;
+ data->oversampling_setting = oversampling;
+}
+
+/*
+ * Returns the currently selected oversampling. Range: 0..3
+ */
+static unsigned char bmp085_get_oversampling(struct bmp085_data *data)
+{
+ return data->oversampling_setting;
+}
+
+/* sysfs callbacks */
+static ssize_t set_oversampling(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct bmp085_data *data = i2c_get_clientdata(client);
+ unsigned long oversampling;
+ int success = strict_strtoul(buf, 10, &oversampling);
+ if (success == 0) {
+ bmp085_set_oversampling(data, oversampling);
+ return count;
+ }
+ return success;
+}
+
+static ssize_t show_oversampling(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct bmp085_data *data = i2c_get_clientdata(client);
+ return sprintf(buf, "%u\n", bmp085_get_oversampling(data));
+}
+static DEVICE_ATTR(oversampling, S_IWUSR | S_IRUGO,
+ show_oversampling, set_oversampling);
+
+
+static ssize_t show_temperature(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ int temperature;
+ int status;
+ struct i2c_client *client = to_i2c_client(dev);
+ struct bmp085_data *data = i2c_get_clientdata(client);
+
+ status = bmp085_get_temperature(data, &temperature);
+ if (status != 0)
+ return status;
+ else
+ return sprintf(buf, "%d\n", temperature);
+}
+static DEVICE_ATTR(temp0_input, S_IRUGO, show_temperature, NULL);
+
+
+static ssize_t show_pressure(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ int pressure;
+ int status;
+ struct i2c_client *client = to_i2c_client(dev);
+ struct bmp085_data *data = i2c_get_clientdata(client);
+
+ status = bmp085_get_pressure(data, &pressure);
+ if (status != 0)
+ return status;
+ else
+ return sprintf(buf, "%d\n", pressure);
+}
+static DEVICE_ATTR(pressure0_input, S_IRUGO, show_pressure, NULL);
+
+
+static struct attribute *bmp085_attributes[] = {
+ &dev_attr_temp0_input.attr,
+ &dev_attr_pressure0_input.attr,
+ &dev_attr_oversampling.attr,
+ NULL
+};
+
+static const struct attribute_group bmp085_attr_group = {
+ .attrs = bmp085_attributes,
+};
+
+static int bmp085_detect(struct i2c_client *client, struct i2c_board_info *info)
+{
+ if (client->addr != BMP085_I2C_ADDRESS)
+ return -ENODEV;
+
+ if (i2c_smbus_read_byte_data(client, BMP085_CHIP_ID_REG) != BMP085_CHIP_ID)
+ return -ENODEV;
+
+ return 0;
+}
+
+static int bmp085_init_client(struct i2c_client *client)
+{
+ unsigned char version;
+ int status;
+ struct bmp085_data *data = i2c_get_clientdata(client);
+ data->client = client;
+ status = bmp085_read_calibration_data(client);
+ if (status != 0)
+ goto exit;
+ version = i2c_smbus_read_byte_data(client, BMP085_VERSION_REG);
+ data->last_temp_measurement = 0;
+ data->oversampling_setting = 3;
+ mutex_init(&data->lock);
+ dev_info(&data->client->dev, "BMP085 ver. %d.%d found.\n",
+ (version & 0x0F), (version & 0xF0) >> 4);
+exit:
+ return status;
+}
+
+static int bmp085_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ struct bmp085_data *data;
+ int err = 0;
+
+ data = kzalloc(sizeof(struct bmp085_data), GFP_KERNEL);
+ if (!data) {
+ err = -ENOMEM;
+ goto exit;
+ }
+
+ /* default settings after POR */
+ data->oversampling_setting = 0x00;
+
+ i2c_set_clientdata(client, data);
+
+ /* Initialize the BMP085 chip */
+ err = bmp085_init_client(client);
+ if (err != 0)
+ goto exit_free;
+
+ /* Register sysfs hooks */
+ err = sysfs_create_group(&client->dev.kobj, &bmp085_attr_group);
+ if (err)
+ goto exit_free;
+
+ dev_info(&data->client->dev, "Succesfully initialized bmp085!\n");
+ goto exit;
+
+exit_free:
+ kfree(data);
+exit:
+ return err;
+}
+
+static int bmp085_remove(struct i2c_client *client)
+{
+ sysfs_remove_group(&client->dev.kobj, &bmp085_attr_group);
+ kfree(i2c_get_clientdata(client));
+ return 0;
+}
+
+static const struct i2c_device_id bmp085_id[] = {
+ { "bmp085", 0 },
+ { }
+};
+
+static struct i2c_driver bmp085_driver = {
+ .driver = {
+ .owner = THIS_MODULE,
+ .name = "bmp085"
+ },
+ .id_table = bmp085_id,
+ .probe = bmp085_probe,
+ .remove = bmp085_remove,
+
+ .detect = bmp085_detect,
+ .address_list = normal_i2c
+};
+
+static int __init bmp085_init(void)
+{
+ return i2c_add_driver(&bmp085_driver);
+}
+
+static void __exit bmp085_exit(void)
+{
+ i2c_del_driver(&bmp085_driver);
+}
+
+
+MODULE_AUTHOR("Christoph Mair <christoph.mair@gmail.com");
+MODULE_DESCRIPTION("BMP085 driver");
+MODULE_LICENSE("GPL");
+
+module_init(bmp085_init);
+module_exit(bmp085_exit);
diff --git a/drivers/misc/enclosure.c b/drivers/misc/enclosure.c
index 48c84a58163..00e5fcac8fd 100644
--- a/drivers/misc/enclosure.c
+++ b/drivers/misc/enclosure.c
@@ -285,8 +285,11 @@ enclosure_component_register(struct enclosure_device *edev,
cdev->groups = enclosure_groups;
err = device_register(cdev);
- if (err)
- ERR_PTR(err);
+ if (err) {
+ ecomp->number = -1;
+ put_device(cdev);
+ return ERR_PTR(err);
+ }
return ecomp;
}
diff --git a/drivers/misc/hmc6352.c b/drivers/misc/hmc6352.c
new file mode 100644
index 00000000000..234bfcaf209
--- /dev/null
+++ b/drivers/misc/hmc6352.c
@@ -0,0 +1,166 @@
+/*
+ * hmc6352.c - Honeywell Compass Driver
+ *
+ * Copyright (C) 2009 Intel Corp
+ *
+ * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
+ * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/i2c.h>
+#include <linux/err.h>
+#include <linux/delay.h>
+#include <linux/sysfs.h>
+
+static DEFINE_MUTEX(compass_mutex);
+
+static int compass_command(struct i2c_client *c, u8 cmd)
+{
+ int ret = i2c_master_send(c, &cmd, 1);
+ if (ret < 0)
+ dev_warn(&c->dev, "command '%c' failed.\n", cmd);
+ return ret;
+}
+
+static int compass_store(struct device *dev, const char *buf, size_t count,
+ const char *map)
+{
+ struct i2c_client *c = to_i2c_client(dev);
+ int ret;
+ unsigned long val;
+
+ if (strict_strtoul(buf, 10, &val))
+ return -EINVAL;
+ if (val >= strlen(map))
+ return -EINVAL;
+ mutex_lock(&compass_mutex);
+ ret = compass_command(c, map[val]);
+ mutex_unlock(&compass_mutex);
+ if (ret < 0)
+ return ret;
+ return count;
+}
+
+static ssize_t compass_calibration_store(struct device *dev,
+ struct device_attribute *attr, const char *buf, size_t count)
+{
+ return compass_store(dev, buf, count, "EC");
+}
+
+static ssize_t compass_power_mode_store(struct device *dev,
+ struct device_attribute *attr, const char *buf, size_t count)
+{
+ return compass_store(dev, buf, count, "SW");
+}
+
+static ssize_t compass_heading_data_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ unsigned char i2c_data[2];
+ unsigned int ret;
+
+ mutex_lock(&compass_mutex);
+ ret = compass_command(client, 'A');
+ if (ret != 1) {
+ mutex_unlock(&compass_mutex);
+ return ret;
+ }
+ msleep(10); /* sending 'A' cmd we need to wait for 7-10 millisecs */
+ ret = i2c_master_recv(client, i2c_data, 2);
+ mutex_unlock(&compass_mutex);
+ if (ret != 1) {
+ dev_warn(dev, "i2c read data cmd failed\n");
+ return ret;
+ }
+ ret = (i2c_data[0] << 8) | i2c_data[1];
+ return sprintf(buf, "%d.%d\n", ret/10, ret%10);
+}
+
+
+static DEVICE_ATTR(heading0_input, S_IRUGO, compass_heading_data_show, NULL);
+static DEVICE_ATTR(calibration, S_IWUSR, NULL, compass_calibration_store);
+static DEVICE_ATTR(power_state, S_IWUSR, NULL, compass_power_mode_store);
+
+static struct attribute *mid_att_compass[] = {
+ &dev_attr_heading0_input.attr,
+ &dev_attr_calibration.attr,
+ &dev_attr_power_state.attr,
+ NULL
+};
+
+static const struct attribute_group m_compass_gr = {
+ .name = "hmc6352",
+ .attrs = mid_att_compass
+};
+
+static int hmc6352_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ int res;
+
+ res = sysfs_create_group(&client->dev.kobj, &m_compass_gr);
+ if (res) {
+ dev_err(&client->dev, "device_create_file failed\n");
+ return res;
+ }
+ dev_info(&client->dev, "%s HMC6352 compass chip found\n",
+ client->name);
+ return 0;
+}
+
+static int hmc6352_remove(struct i2c_client *client)
+{
+ sysfs_remove_group(&client->dev.kobj, &m_compass_gr);
+ return 0;
+}
+
+static struct i2c_device_id hmc6352_id[] = {
+ { "hmc6352", 0 },
+ { }
+};
+
+MODULE_DEVICE_TABLE(i2c, hmc6352_id);
+
+static struct i2c_driver hmc6352_driver = {
+ .driver = {
+ .name = "hmc6352",
+ },
+ .probe = hmc6352_probe,
+ .remove = hmc6352_remove,
+ .id_table = hmc6352_id,
+};
+
+static int __init sensor_hmc6352_init(void)
+{
+ return i2c_add_driver(&hmc6352_driver);
+}
+
+static void __exit sensor_hmc6352_exit(void)
+{
+ i2c_del_driver(&hmc6352_driver);
+}
+
+module_init(sensor_hmc6352_init);
+module_exit(sensor_hmc6352_exit);
+
+MODULE_AUTHOR("Kalhan Trisal <kalhan.trisal@intel.com");
+MODULE_DESCRIPTION("hmc6352 Compass Driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/misc/hpilo.c b/drivers/misc/hpilo.c
index 98ad0120aa9..557a8c2a733 100644
--- a/drivers/misc/hpilo.c
+++ b/drivers/misc/hpilo.c
@@ -256,7 +256,8 @@ static void ilo_ccb_close(struct pci_dev *pdev, struct ccb_data *data)
static int ilo_ccb_setup(struct ilo_hwinfo *hw, struct ccb_data *data, int slot)
{
- char *dma_va, *dma_pa;
+ char *dma_va;
+ dma_addr_t dma_pa;
struct ccb *driver_ccb, *ilo_ccb;
driver_ccb = &data->driver_ccb;
@@ -272,12 +273,12 @@ static int ilo_ccb_setup(struct ilo_hwinfo *hw, struct ccb_data *data, int slot)
return -ENOMEM;
dma_va = (char *)data->dma_va;
- dma_pa = (char *)data->dma_pa;
+ dma_pa = data->dma_pa;
memset(dma_va, 0, data->dma_size);
dma_va = (char *)roundup((unsigned long)dma_va, ILO_START_ALIGN);
- dma_pa = (char *)roundup((unsigned long)dma_pa, ILO_START_ALIGN);
+ dma_pa = roundup(dma_pa, ILO_START_ALIGN);
/*
* Create two ccb's, one with virt addrs, one with phys addrs.
@@ -288,26 +289,26 @@ static int ilo_ccb_setup(struct ilo_hwinfo *hw, struct ccb_data *data, int slot)
fifo_setup(dma_va, NR_QENTRY);
driver_ccb->ccb_u1.send_fifobar = dma_va + FIFOHANDLESIZE;
- ilo_ccb->ccb_u1.send_fifobar = dma_pa + FIFOHANDLESIZE;
+ ilo_ccb->ccb_u1.send_fifobar_pa = dma_pa + FIFOHANDLESIZE;
dma_va += fifo_sz(NR_QENTRY);
dma_pa += fifo_sz(NR_QENTRY);
dma_va = (char *)roundup((unsigned long)dma_va, ILO_CACHE_SZ);
- dma_pa = (char *)roundup((unsigned long)dma_pa, ILO_CACHE_SZ);
+ dma_pa = roundup(dma_pa, ILO_CACHE_SZ);
fifo_setup(dma_va, NR_QENTRY);
driver_ccb->ccb_u3.recv_fifobar = dma_va + FIFOHANDLESIZE;
- ilo_ccb->ccb_u3.recv_fifobar = dma_pa + FIFOHANDLESIZE;
+ ilo_ccb->ccb_u3.recv_fifobar_pa = dma_pa + FIFOHANDLESIZE;
dma_va += fifo_sz(NR_QENTRY);
dma_pa += fifo_sz(NR_QENTRY);
driver_ccb->ccb_u2.send_desc = dma_va;
- ilo_ccb->ccb_u2.send_desc = dma_pa;
+ ilo_ccb->ccb_u2.send_desc_pa = dma_pa;
dma_pa += desc_mem_sz(NR_QENTRY);
dma_va += desc_mem_sz(NR_QENTRY);
driver_ccb->ccb_u4.recv_desc = dma_va;
- ilo_ccb->ccb_u4.recv_desc = dma_pa;
+ ilo_ccb->ccb_u4.recv_desc_pa = dma_pa;
driver_ccb->channel = slot;
ilo_ccb->channel = slot;
diff --git a/drivers/misc/hpilo.h b/drivers/misc/hpilo.h
index 247eb386a97..54e43adbdea 100644
--- a/drivers/misc/hpilo.h
+++ b/drivers/misc/hpilo.h
@@ -79,21 +79,21 @@ struct ilo_hwinfo {
struct ccb {
union {
char *send_fifobar;
- u64 padding1;
+ u64 send_fifobar_pa;
} ccb_u1;
union {
char *send_desc;
- u64 padding2;
+ u64 send_desc_pa;
} ccb_u2;
u64 send_ctrl;
union {
char *recv_fifobar;
- u64 padding3;
+ u64 recv_fifobar_pa;
} ccb_u3;
union {
char *recv_desc;
- u64 padding4;
+ u64 recv_desc_pa;
} ccb_u4;
u64 recv_ctrl;
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-11-24 04:17:38 +0000