diff options
Diffstat (limited to 'drivers/mmc/core/mmc.c')
| -rw-r--r-- | drivers/mmc/core/mmc.c | 88 |
1 files changed, 57 insertions, 31 deletions
diff --git a/drivers/mmc/core/mmc.c b/drivers/mmc/core/mmc.c index a48066344fa..54df5adc041 100644 --- a/drivers/mmc/core/mmc.c +++ b/drivers/mmc/core/mmc.c @@ -519,6 +519,20 @@ static int mmc_read_ext_csd(struct mmc_card *card, u8 *ext_csd) ext_csd[EXT_CSD_CACHE_SIZE + 1] << 8 | ext_csd[EXT_CSD_CACHE_SIZE + 2] << 16 | ext_csd[EXT_CSD_CACHE_SIZE + 3] << 24; + + if (ext_csd[EXT_CSD_DATA_SECTOR_SIZE] == 1) + card->ext_csd.data_sector_size = 4096; + else + card->ext_csd.data_sector_size = 512; + + if ((ext_csd[EXT_CSD_DATA_TAG_SUPPORT] & 1) && + (ext_csd[EXT_CSD_TAG_UNIT_SIZE] <= 8)) { + card->ext_csd.data_tag_unit_size = + ((unsigned int) 1 << ext_csd[EXT_CSD_TAG_UNIT_SIZE]) * + (card->ext_csd.data_sector_size); + } else { + card->ext_csd.data_tag_unit_size = 0; + } } out: @@ -681,6 +695,11 @@ static int mmc_select_powerclass(struct mmc_card *card, else if (host->ios.clock <= 200000000) index = EXT_CSD_PWR_CL_200_195; break; + case MMC_VDD_27_28: + case MMC_VDD_28_29: + case MMC_VDD_29_30: + case MMC_VDD_30_31: + case MMC_VDD_31_32: case MMC_VDD_32_33: case MMC_VDD_33_34: case MMC_VDD_34_35: @@ -816,6 +835,9 @@ static int mmc_init_card(struct mmc_host *host, u32 ocr, if (!mmc_host_is_spi(host)) mmc_set_bus_mode(host, MMC_BUSMODE_OPENDRAIN); + /* Initialization should be done at 3.3 V I/O voltage. */ + mmc_set_signal_voltage(host, MMC_SIGNAL_VOLTAGE_330, 0); + /* * Since we're changing the OCR value, we seem to * need to tell some cards to go back to the idle @@ -935,7 +957,8 @@ static int mmc_init_card(struct mmc_host *host, u32 ocr, * If enhanced_area_en is TRUE, host needs to enable ERASE_GRP_DEF * bit. This bit will be lost every time after a reset or power off. */ - if (card->ext_csd.enhanced_area_en) { + if (card->ext_csd.enhanced_area_en || + (card->ext_csd.rev >= 3 && (host->caps2 & MMC_CAP2_HC_ERASE_SZ))) { err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL, EXT_CSD_ERASE_GROUP_DEF, 1, card->ext_csd.generic_cmd6_time); @@ -1030,22 +1053,6 @@ static int mmc_init_card(struct mmc_host *host, u32 ocr, } /* - * Enable HPI feature (if supported) - */ - if (card->ext_csd.hpi) { - err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL, - EXT_CSD_HPI_MGMT, 1, 0); - if (err && err != -EBADMSG) - goto free_card; - if (err) { - pr_warning("%s: Enabling HPI failed\n", - mmc_hostname(card->host)); - err = 0; - } else - card->ext_csd.hpi_en = 1; - } - - /* * Compute bus speed. */ max_dtr = (unsigned int)-1; @@ -1094,9 +1101,12 @@ static int mmc_init_card(struct mmc_host *host, u32 ocr, * 4. execute tuning for HS200 */ if ((host->caps2 & MMC_CAP2_HS200) && - card->host->ops->execute_tuning) + card->host->ops->execute_tuning) { + mmc_host_clk_hold(card->host); err = card->host->ops->execute_tuning(card->host, MMC_SEND_TUNING_BLOCK_HS200); + mmc_host_clk_release(card->host); + } if (err) { pr_warning("%s: tuning execution failed\n", mmc_hostname(card->host)); @@ -1106,11 +1116,10 @@ static int mmc_init_card(struct mmc_host *host, u32 ocr, ext_csd_bits = (bus_width == MMC_BUS_WIDTH_8) ? EXT_CSD_BUS_WIDTH_8 : EXT_CSD_BUS_WIDTH_4; err = mmc_select_powerclass(card, ext_csd_bits, ext_csd); - if (err) { - pr_err("%s: power class selection to bus width %d failed\n", - mmc_hostname(card->host), 1 << bus_width); - goto err; - } + if (err) + pr_warning("%s: power class selection to bus width %d" + " failed\n", mmc_hostname(card->host), + 1 << bus_width); } /* @@ -1142,10 +1151,10 @@ static int mmc_init_card(struct mmc_host *host, u32 ocr, err = mmc_select_powerclass(card, ext_csd_bits[idx][0], ext_csd); if (err) - pr_err("%s: power class selection to " - "bus width %d failed\n", - mmc_hostname(card->host), - 1 << bus_width); + pr_warning("%s: power class selection to " + "bus width %d failed\n", + mmc_hostname(card->host), + 1 << bus_width); err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL, EXT_CSD_BUS_WIDTH, @@ -1173,10 +1182,10 @@ static int mmc_init_card(struct mmc_host *host, u32 ocr, err = mmc_select_powerclass(card, ext_csd_bits[idx][1], ext_csd); if (err) - pr_err("%s: power class selection to " - "bus width %d ddr %d failed\n", - mmc_hostname(card->host), - 1 << bus_width, ddr); + pr_warning("%s: power class selection to " + "bus width %d ddr %d failed\n", + mmc_hostname(card->host), + 1 << bus_width, ddr); err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL, EXT_CSD_BUS_WIDTH, @@ -1216,6 +1225,23 @@ static int mmc_init_card(struct mmc_host *host, u32 ocr, } /* + * Enable HPI feature (if supported) + */ + if (card->ext_csd.hpi) { + err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL, + EXT_CSD_HPI_MGMT, 1, + card->ext_csd.generic_cmd6_time); + if (err && err != -EBADMSG) + goto free_card; + if (err) { + pr_warning("%s: Enabling HPI failed\n", + mmc_hostname(card->host)); + err = 0; + } else + card->ext_csd.hpi_en = 1; + } + + /* * If cache size is higher than 0, this indicates * the existence of cache and it can be turned on. */ |