diff options
Diffstat (limited to 'drivers/mmc/core/mmc.c')
-rw-r--r-- | drivers/mmc/core/mmc.c | 103 |
1 files changed, 54 insertions, 49 deletions
diff --git a/drivers/mmc/core/mmc.c b/drivers/mmc/core/mmc.c index 02ad79229f6..1d41e8541f3 100644 --- a/drivers/mmc/core/mmc.c +++ b/drivers/mmc/core/mmc.c @@ -483,11 +483,13 @@ static int mmc_decode_ext_csd(struct mmc_card *card, u8 *ext_csd) /* check whether the eMMC card supports BKOPS */ if (ext_csd[EXT_CSD_BKOPS_SUPPORT] & 0x1) { card->ext_csd.bkops = 1; - card->ext_csd.bkops_en = ext_csd[EXT_CSD_BKOPS_EN]; + card->ext_csd.man_bkops_en = + (ext_csd[EXT_CSD_BKOPS_EN] & + EXT_CSD_MANUAL_BKOPS_MASK); card->ext_csd.raw_bkops_status = ext_csd[EXT_CSD_BKOPS_STATUS]; - if (!card->ext_csd.bkops_en) - pr_info("%s: BKOPS_EN bit is not set\n", + if (!card->ext_csd.man_bkops_en) + pr_info("%s: MAN_BKOPS_EN bit is not set\n", mmc_hostname(card->host)); } @@ -886,7 +888,7 @@ static int mmc_select_bus_width(struct mmc_card *card) unsigned idx, bus_width = 0; int err = 0; - if (!mmc_can_ext_csd(card) && + if (!mmc_can_ext_csd(card) || !(host->caps & (MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA))) return 0; @@ -1155,38 +1157,6 @@ bus_speed: return err; } -const u8 tuning_blk_pattern_4bit[MMC_TUNING_BLK_PATTERN_4BIT_SIZE] = { - 0xff, 0x0f, 0xff, 0x00, 0xff, 0xcc, 0xc3, 0xcc, - 0xc3, 0x3c, 0xcc, 0xff, 0xfe, 0xff, 0xfe, 0xef, - 0xff, 0xdf, 0xff, 0xdd, 0xff, 0xfb, 0xff, 0xfb, - 0xbf, 0xff, 0x7f, 0xff, 0x77, 0xf7, 0xbd, 0xef, - 0xff, 0xf0, 0xff, 0xf0, 0x0f, 0xfc, 0xcc, 0x3c, - 0xcc, 0x33, 0xcc, 0xcf, 0xff, 0xef, 0xff, 0xee, - 0xff, 0xfd, 0xff, 0xfd, 0xdf, 0xff, 0xbf, 0xff, - 0xbb, 0xff, 0xf7, 0xff, 0xf7, 0x7f, 0x7b, 0xde, -}; -EXPORT_SYMBOL(tuning_blk_pattern_4bit); - -const u8 tuning_blk_pattern_8bit[MMC_TUNING_BLK_PATTERN_8BIT_SIZE] = { - 0xff, 0xff, 0x00, 0xff, 0xff, 0xff, 0x00, 0x00, - 0xff, 0xff, 0xcc, 0xcc, 0xcc, 0x33, 0xcc, 0xcc, - 0xcc, 0x33, 0x33, 0xcc, 0xcc, 0xcc, 0xff, 0xff, - 0xff, 0xee, 0xff, 0xff, 0xff, 0xee, 0xee, 0xff, - 0xff, 0xff, 0xdd, 0xff, 0xff, 0xff, 0xdd, 0xdd, - 0xff, 0xff, 0xff, 0xbb, 0xff, 0xff, 0xff, 0xbb, - 0xbb, 0xff, 0xff, 0xff, 0x77, 0xff, 0xff, 0xff, - 0x77, 0x77, 0xff, 0x77, 0xbb, 0xdd, 0xee, 0xff, - 0xff, 0xff, 0xff, 0x00, 0xff, 0xff, 0xff, 0x00, - 0x00, 0xff, 0xff, 0xcc, 0xcc, 0xcc, 0x33, 0xcc, - 0xcc, 0xcc, 0x33, 0x33, 0xcc, 0xcc, 0xcc, 0xff, - 0xff, 0xff, 0xee, 0xff, 0xff, 0xff, 0xee, 0xee, - 0xff, 0xff, 0xff, 0xdd, 0xff, 0xff, 0xff, 0xdd, - 0xdd, 0xff, 0xff, 0xff, 0xbb, 0xff, 0xff, 0xff, - 0xbb, 0xbb, 0xff, 0xff, 0xff, 0x77, 0xff, 0xff, - 0xff, 0x77, 0x77, 0xff, 0x77, 0xbb, 0xdd, 0xee, -}; -EXPORT_SYMBOL(tuning_blk_pattern_8bit); - /* * Execute tuning sequence to seek the proper bus operating * conditions for HS200 and HS400, which sends CMD21 to the device. @@ -1194,7 +1164,6 @@ EXPORT_SYMBOL(tuning_blk_pattern_8bit); static int mmc_hs200_tuning(struct mmc_card *card) { struct mmc_host *host = card->host; - int err = 0; /* * Timing should be adjusted to the HS400 target @@ -1205,18 +1174,7 @@ static int mmc_hs200_tuning(struct mmc_card *card) if (host->ops->prepare_hs400_tuning) host->ops->prepare_hs400_tuning(host, &host->ios); - if (host->ops->execute_tuning) { - mmc_host_clk_hold(host); - err = host->ops->execute_tuning(host, - MMC_SEND_TUNING_BLOCK_HS200); - mmc_host_clk_release(host); - - if (err) - pr_err("%s: tuning execution failed\n", - mmc_hostname(host)); - } - - return err; + return mmc_execute_tuning(card); } /* @@ -1297,6 +1255,12 @@ static int mmc_init_card(struct mmc_host *host, u32 ocr, } /* + * Call the optional HC's init_card function to handle quirks. + */ + if (host->ops->init_card) + host->ops->init_card(host, card); + + /* * For native busses: set card RCA and quit open drain mode. */ if (!mmc_host_is_spi(host)) { @@ -1821,6 +1785,46 @@ static int mmc_power_restore(struct mmc_host *host) return ret; } +int mmc_can_reset(struct mmc_card *card) +{ + u8 rst_n_function; + + rst_n_function = card->ext_csd.rst_n_function; + if ((rst_n_function & EXT_CSD_RST_N_EN_MASK) != EXT_CSD_RST_N_ENABLED) + return 0; + return 1; +} +EXPORT_SYMBOL(mmc_can_reset); + +static int mmc_reset(struct mmc_host *host) +{ + struct mmc_card *card = host->card; + u32 status; + + if (!(host->caps & MMC_CAP_HW_RESET) || !host->ops->hw_reset) + return -EOPNOTSUPP; + + if (!mmc_can_reset(card)) + return -EOPNOTSUPP; + + mmc_host_clk_hold(host); + mmc_set_clock(host, host->f_init); + + host->ops->hw_reset(host); + + /* If the reset has happened, then a status command will fail */ + if (!mmc_send_status(card, &status)) { + mmc_host_clk_release(host); + return -ENOSYS; + } + + /* Set initial state and call mmc_set_ios */ + mmc_set_initial_state(host); + mmc_host_clk_release(host); + + return mmc_power_restore(host); +} + static const struct mmc_bus_ops mmc_ops = { .remove = mmc_remove, .detect = mmc_detect, @@ -1831,6 +1835,7 @@ static const struct mmc_bus_ops mmc_ops = { .power_restore = mmc_power_restore, .alive = mmc_alive, .shutdown = mmc_shutdown, + .reset = mmc_reset, }; /* |