4 files changed, 46 insertions, 8 deletions

diff --git a/drivers/mmc/core/core.c b/drivers/mmc/core/core.c
index 08a3cf2a761..c40396f2320 100644
--- a/drivers/mmc/core/core.c
+++ b/drivers/mmc/core/core.c
@@ -120,8 +120,8 @@ static void mmc_should_fail_request(struct mmc_host *host,
 	    !should_fail(&host->fail_mmc_request, data->blksz * data->blocks))
 		return;
 
-	data->error = data_errors[random32() % ARRAY_SIZE(data_errors)];
-	data->bytes_xfered = (random32() % (data->bytes_xfered >> 9)) << 9;
+	data->error = data_errors[prandom_u32() % ARRAY_SIZE(data_errors)];
+	data->bytes_xfered = (prandom_u32() % (data->bytes_xfered >> 9)) << 9;
 }
 
 #else /* CONFIG_FAIL_MMC_REQUEST */
@@ -2289,6 +2289,19 @@ int _mmc_detect_card_removed(struct mmc_host *host)
 		return 1;
 
 	ret = host->bus_ops->alive(host);
+
+	/*
+	 * Card detect status and alive check may be out of sync if card is
+	 * removed slowly, when card detect switch changes while card/slot
+	 * pads are still contacted in hardware (refer to "SD Card Mechanical
+	 * Addendum, Appendix C: Card Detection Switch"). So reschedule a
+	 * detect work 200ms later for this case.
+	 */
+	if (!ret && host->ops->get_cd && !host->ops->get_cd(host)) {
+		mmc_detect_change(host, msecs_to_jiffies(200));
+		pr_debug("%s: card removed too slowly\n", mmc_hostname(host));
+	}
+
 	if (ret) {
 		mmc_card_set_removed(host->card);
 		pr_debug("%s: card remove detected\n", mmc_hostname(host));
@@ -2403,7 +2416,10 @@ void mmc_start_host(struct mmc_host *host)
 {
 	host->f_init = max(freqs[0], host->f_min);
 	host->rescan_disable = 0;
-	mmc_power_up(host);
+	if (host->caps2 & MMC_CAP2_NO_PRESCAN_POWERUP)
+		mmc_power_off(host);
+	else
+		mmc_power_up(host);
 	mmc_detect_change(host, 0);
 }
 
diff --git a/drivers/mmc/core/mmc.c b/drivers/mmc/core/mmc.c
index c8f3d6e0684..0cbd1effe96 100644
--- a/drivers/mmc/core/mmc.c
+++ b/drivers/mmc/core/mmc.c
@@ -96,6 +96,7 @@ static int mmc_decode_cid(struct mmc_card *card)
 		card->cid.prod_name[3]	= UNSTUFF_BITS(resp, 72, 8);
 		card->cid.prod_name[4]	= UNSTUFF_BITS(resp, 64, 8);
 		card->cid.prod_name[5]	= UNSTUFF_BITS(resp, 56, 8);
+		card->cid.prv		= UNSTUFF_BITS(resp, 48, 8);
 		card->cid.serial	= UNSTUFF_BITS(resp, 16, 32);
 		card->cid.month		= UNSTUFF_BITS(resp, 12, 4);
 		card->cid.year		= UNSTUFF_BITS(resp, 8, 4) + 1997;
@@ -368,13 +369,13 @@ static int mmc_read_ext_csd(struct mmc_card *card, u8 *ext_csd)
 		ext_csd[EXT_CSD_SEC_FEATURE_SUPPORT];
 	card->ext_csd.raw_trim_mult =
 		ext_csd[EXT_CSD_TRIM_MULT];
+	card->ext_csd.raw_partition_support = ext_csd[EXT_CSD_PARTITION_SUPPORT];
 	if (card->ext_csd.rev >= 4) {
 		/*
 		 * Enhanced area feature support -- check whether the eMMC
 		 * card has the Enhanced area enabled.  If so, export enhanced
 		 * area offset and size to user by adding sysfs interface.
 		 */
-		card->ext_csd.raw_partition_support = ext_csd[EXT_CSD_PARTITION_SUPPORT];
 		if ((ext_csd[EXT_CSD_PARTITION_SUPPORT] & 0x2) &&
 		    (ext_csd[EXT_CSD_PARTITION_ATTRIBUTE] & 0x1)) {
 			hc_erase_grp_sz =
@@ -627,6 +628,7 @@ MMC_DEV_ATTR(hwrev, "0x%x\n", card->cid.hwrev);
 MMC_DEV_ATTR(manfid, "0x%06x\n", card->cid.manfid);
 MMC_DEV_ATTR(name, "%s\n", card->cid.prod_name);
 MMC_DEV_ATTR(oemid, "0x%04x\n", card->cid.oemid);
+MMC_DEV_ATTR(prv, "0x%x\n", card->cid.prv);
 MMC_DEV_ATTR(serial, "0x%08x\n", card->cid.serial);
 MMC_DEV_ATTR(enhanced_area_offset, "%llu\n",
 		card->ext_csd.enhanced_area_offset);
@@ -645,6 +647,7 @@ static struct attribute *mmc_std_attrs[] = {
 	&dev_attr_manfid.attr,
 	&dev_attr_name.attr,
 	&dev_attr_oemid.attr,
+	&dev_attr_prv.attr,
 	&dev_attr_serial.attr,
 	&dev_attr_enhanced_area_offset.attr,
 	&dev_attr_enhanced_area_size.attr,
diff --git a/drivers/mmc/core/sdio.c b/drivers/mmc/core/sdio.c
index aa0719a4dfd..6889a821c1d 100644
--- a/drivers/mmc/core/sdio.c
+++ b/drivers/mmc/core/sdio.c
@@ -861,8 +861,10 @@ static void mmc_sdio_detect(struct mmc_host *host)
 	/* Make sure card is powered before detecting it */
 	if (host->caps & MMC_CAP_POWER_OFF_CARD) {
 		err = pm_runtime_get_sync(&host->card->dev);
-		if (err < 0)
+		if (err < 0) {
+			pm_runtime_put_noidle(&host->card->dev);
 			goto out;
+		}
 	}
 
 	mmc_claim_host(host);
diff --git a/drivers/mmc/core/sdio_bus.c b/drivers/mmc/core/sdio_bus.c
index 5e57048e2c1..546c67c2bbb 100644
--- a/drivers/mmc/core/sdio_bus.c
+++ b/drivers/mmc/core/sdio_bus.c
@@ -16,6 +16,7 @@
 #include <linux/export.h>
 #include <linux/slab.h>
 #include <linux/pm_runtime.h>
+#include <linux/acpi.h>
 
 #include <linux/mmc/card.h>
 #include <linux/mmc/host.h>
@@ -137,7 +138,7 @@ static int sdio_bus_probe(struct device *dev)
 	if (func->card->host->caps & MMC_CAP_POWER_OFF_CARD) {
 		ret = pm_runtime_get_sync(dev);
 		if (ret < 0)
-			goto out;
+			goto disable_runtimepm;
 	}
 
 	/* Set the default block size so the driver is sure it's something
@@ -157,7 +158,6 @@ static int sdio_bus_probe(struct device *dev)
 disable_runtimepm:
 	if (func->card->host->caps & MMC_CAP_POWER_OFF_CARD)
 		pm_runtime_put_noidle(dev);
-out:
 	return ret;
 }
 
@@ -299,6 +299,19 @@ struct sdio_func *sdio_alloc_func(struct mmc_card *card)
 	return func;
 }
 
+#ifdef CONFIG_ACPI
+static void sdio_acpi_set_handle(struct sdio_func *func)
+{
+	struct mmc_host *host = func->card->host;
+	u64 addr = (host->slotno << 16) | func->num;
+
+	ACPI_HANDLE_SET(&func->dev,
+			acpi_get_child(ACPI_HANDLE(host->parent), addr));
+}
+#else
+static inline void sdio_acpi_set_handle(struct sdio_func *func) {}
+#endif
+
 /*
  * Register a new SDIO function with the driver model.
  */
@@ -308,9 +321,12 @@ int sdio_add_func(struct sdio_func *func)
 
 	dev_set_name(&func->dev, "%s:%d", mmc_card_id(func->card), func->num);
 
+	sdio_acpi_set_handle(func);
 	ret = device_add(&func->dev);
-	if (ret == 0)
+	if (ret == 0) {
 		sdio_func_set_present(func);
+		acpi_dev_pm_attach(&func->dev, false);
+	}
 
 	return ret;
 }
@@ -326,6 +342,7 @@ void sdio_remove_func(struct sdio_func *func)
 	if (!sdio_func_present(func))
 		return;
 
+	acpi_dev_pm_detach(&func->dev, false);
 	device_del(&func->dev);
 	put_device(&func->dev);
 }