diff options
Diffstat (limited to 'drivers/mmc/core')
| -rw-r--r-- | drivers/mmc/core/core.c | 200 | ||||
| -rw-r--r-- | drivers/mmc/core/mmc.c | 77 | ||||
| -rw-r--r-- | drivers/mmc/core/sd.c | 68 | ||||
| -rw-r--r-- | drivers/mmc/core/sdio.c | 39 | ||||
| -rw-r--r-- | drivers/mmc/core/sdio_bus.c | 10 |
5 files changed, 320 insertions, 74 deletions
diff --git a/drivers/mmc/core/core.c b/drivers/mmc/core/core.c index 68091dda3f3..89bdeaec718 100644 --- a/drivers/mmc/core/core.c +++ b/drivers/mmc/core/core.c @@ -23,6 +23,7 @@ #include <linux/log2.h> #include <linux/regulator/consumer.h> #include <linux/pm_runtime.h> +#include <linux/suspend.h> #include <linux/mmc/card.h> #include <linux/mmc/host.h> @@ -198,9 +199,109 @@ mmc_start_request(struct mmc_host *host, struct mmc_request *mrq) static void mmc_wait_done(struct mmc_request *mrq) { - complete(mrq->done_data); + complete(&mrq->completion); } +static void __mmc_start_req(struct mmc_host *host, struct mmc_request *mrq) +{ + init_completion(&mrq->completion); + mrq->done = mmc_wait_done; + mmc_start_request(host, mrq); +} + +static void mmc_wait_for_req_done(struct mmc_host *host, + struct mmc_request *mrq) +{ + wait_for_completion(&mrq->completion); +} + +/** + * mmc_pre_req - Prepare for a new request + * @host: MMC host to prepare command + * @mrq: MMC request to prepare for + * @is_first_req: true if there is no previous started request + * that may run in parellel to this call, otherwise false + * + * mmc_pre_req() is called in prior to mmc_start_req() to let + * host prepare for the new request. Preparation of a request may be + * performed while another request is running on the host. + */ +static void mmc_pre_req(struct mmc_host *host, struct mmc_request *mrq, + bool is_first_req) +{ + if (host->ops->pre_req) + host->ops->pre_req(host, mrq, is_first_req); +} + +/** + * mmc_post_req - Post process a completed request + * @host: MMC host to post process command + * @mrq: MMC request to post process for + * @err: Error, if non zero, clean up any resources made in pre_req + * + * Let the host post process a completed request. Post processing of + * a request may be performed while another reuqest is running. + */ +static void mmc_post_req(struct mmc_host *host, struct mmc_request *mrq, + int err) +{ + if (host->ops->post_req) + host->ops->post_req(host, mrq, err); +} + +/** + * mmc_start_req - start a non-blocking request + * @host: MMC host to start command + * @areq: async request to start + * @error: out parameter returns 0 for success, otherwise non zero + * + * Start a new MMC custom command request for a host. + * If there is on ongoing async request wait for completion + * of that request and start the new one and return. + * Does not wait for the new request to complete. + * + * Returns the completed request, NULL in case of none completed. + * Wait for the an ongoing request (previoulsy started) to complete and + * return the completed request. If there is no ongoing request, NULL + * is returned without waiting. NULL is not an error condition. + */ +struct mmc_async_req *mmc_start_req(struct mmc_host *host, + struct mmc_async_req *areq, int *error) +{ + int err = 0; + struct mmc_async_req *data = host->areq; + + /* Prepare a new request */ + if (areq) + mmc_pre_req(host, areq->mrq, !host->areq); + + if (host->areq) { + mmc_wait_for_req_done(host, host->areq->mrq); + err = host->areq->err_check(host->card, host->areq); + if (err) { + mmc_post_req(host, host->areq->mrq, 0); + if (areq) + mmc_post_req(host, areq->mrq, -EINVAL); + + host->areq = NULL; + goto out; + } + } + + if (areq) + __mmc_start_req(host, areq->mrq); + + if (host->areq) + mmc_post_req(host, host->areq->mrq, 0); + + host->areq = areq; + out: + if (error) + *error = err; + return data; +} +EXPORT_SYMBOL(mmc_start_req); + /** * mmc_wait_for_req - start a request and wait for completion * @host: MMC host to start command @@ -212,16 +313,9 @@ static void mmc_wait_done(struct mmc_request *mrq) */ void mmc_wait_for_req(struct mmc_host *host, struct mmc_request *mrq) { - DECLARE_COMPLETION_ONSTACK(complete); - - mrq->done_data = &complete; - mrq->done = mmc_wait_done; - - mmc_start_request(host, mrq); - - wait_for_completion(&complete); + __mmc_start_req(host, mrq); + mmc_wait_for_req_done(host, mrq); } - EXPORT_SYMBOL(mmc_wait_for_req); /** @@ -1245,7 +1339,7 @@ static unsigned int mmc_mmc_erase_timeout(struct mmc_card *card, */ timeout_clks <<= 1; timeout_us += (timeout_clks * 1000) / - (card->host->ios.clock / 1000); + (mmc_host_clk_rate(card->host) / 1000); erase_timeout = timeout_us / 1000; @@ -1516,6 +1610,82 @@ int mmc_erase_group_aligned(struct mmc_card *card, unsigned int from, } EXPORT_SYMBOL(mmc_erase_group_aligned); +static unsigned int mmc_do_calc_max_discard(struct mmc_card *card, + unsigned int arg) +{ + struct mmc_host *host = card->host; + unsigned int max_discard, x, y, qty = 0, max_qty, timeout; + unsigned int last_timeout = 0; + + if (card->erase_shift) + max_qty = UINT_MAX >> card->erase_shift; + else if (mmc_card_sd(card)) + max_qty = UINT_MAX; + else + max_qty = UINT_MAX / card->erase_size; + + /* Find the largest qty with an OK timeout */ + do { + y = 0; + for (x = 1; x && x <= max_qty && max_qty - x >= qty; x <<= 1) { + timeout = mmc_erase_timeout(card, arg, qty + x); + if (timeout > host->max_discard_to) + break; + if (timeout < last_timeout) + break; + last_timeout = timeout; + y = x; + } + qty += y; + } while (y); + + if (!qty) + return 0; + + if (qty == 1) + return 1; + + /* Convert qty to sectors */ + if (card->erase_shift) + max_discard = --qty << card->erase_shift; + else if (mmc_card_sd(card)) + max_discard = qty; + else + max_discard = --qty * card->erase_size; + + return max_discard; +} + +unsigned int mmc_calc_max_discard(struct mmc_card *card) +{ + struct mmc_host *host = card->host; + unsigned int max_discard, max_trim; + + if (!host->max_discard_to) + return UINT_MAX; + + /* + * Without erase_group_def set, MMC erase timeout depends on clock + * frequence which can change. In that case, the best choice is + * just the preferred erase size. + */ + if (mmc_card_mmc(card) && !(card->ext_csd.erase_group_def & 1)) + return card->pref_erase; + + max_discard = mmc_do_calc_max_discard(card, MMC_ERASE_ARG); + if (mmc_can_trim(card)) { + max_trim = mmc_do_calc_max_discard(card, MMC_TRIM_ARG); + if (max_trim < max_discard) + max_discard = max_trim; + } else if (max_discard < card->erase_size) { + max_discard = 0; + } + pr_debug("%s: calculated max. discard sectors %u for timeout %u ms\n", + mmc_hostname(host), max_discard, host->max_discard_to); + return max_discard; +} +EXPORT_SYMBOL(mmc_calc_max_discard); + int mmc_set_blocklen(struct mmc_card *card, unsigned int blocklen) { struct mmc_command cmd = {0}; @@ -1663,6 +1833,10 @@ int mmc_power_save_host(struct mmc_host *host) { int ret = 0; +#ifdef CONFIG_MMC_DEBUG + pr_info("%s: %s: powering down\n", mmc_hostname(host), __func__); +#endif + mmc_bus_get(host); if (!host->bus_ops || host->bus_dead || !host->bus_ops->power_restore) { @@ -1685,6 +1859,10 @@ int mmc_power_restore_host(struct mmc_host *host) { int ret; +#ifdef CONFIG_MMC_DEBUG + pr_info("%s: %s: powering up\n", mmc_hostname(host), __func__); +#endif + mmc_bus_get(host); if (!host->bus_ops || host->bus_dead || !host->bus_ops->power_restore) { diff --git a/drivers/mmc/core/mmc.c b/drivers/mmc/core/mmc.c index 2a7e43bc796..aa7d1d79b8c 100644 --- a/drivers/mmc/core/mmc.c +++ b/drivers/mmc/core/mmc.c @@ -247,12 +247,12 @@ static int mmc_read_ext_csd(struct mmc_card *card, u8 *ext_csd) return 0; /* Version is coded in the CSD_STRUCTURE byte in the EXT_CSD register */ + card->ext_csd.raw_ext_csd_structure = ext_csd[EXT_CSD_STRUCTURE]; if (card->csd.structure == 3) { - int ext_csd_struct = ext_csd[EXT_CSD_STRUCTURE]; - if (ext_csd_struct > 2) { + if (card->ext_csd.raw_ext_csd_structure > 2) { printk(KERN_ERR "%s: unrecognised EXT_CSD structure " "version %d\n", mmc_hostname(card->host), - ext_csd_struct); + card->ext_csd.raw_ext_csd_structure); err = -EINVAL; goto out; } @@ -266,6 +266,10 @@ static int mmc_read_ext_csd(struct mmc_card *card, u8 *ext_csd) goto out; } + card->ext_csd.raw_sectors[0] = ext_csd[EXT_CSD_SEC_CNT + 0]; + card->ext_csd.raw_sectors[1] = ext_csd[EXT_CSD_SEC_CNT + 1]; + card->ext_csd.raw_sectors[2] = ext_csd[EXT_CSD_SEC_CNT + 2]; + card->ext_csd.raw_sectors[3] = ext_csd[EXT_CSD_SEC_CNT + 3]; if (card->ext_csd.rev >= 2) { card->ext_csd.sectors = ext_csd[EXT_CSD_SEC_CNT + 0] << 0 | @@ -277,7 +281,7 @@ static int mmc_read_ext_csd(struct mmc_card *card, u8 *ext_csd) if (card->ext_csd.sectors > (2u * 1024 * 1024 * 1024) / 512) mmc_card_set_blockaddr(card); } - + card->ext_csd.raw_card_type = ext_csd[EXT_CSD_CARD_TYPE]; switch (ext_csd[EXT_CSD_CARD_TYPE] & EXT_CSD_CARD_TYPE_MASK) { case EXT_CSD_CARD_TYPE_DDR_52 | EXT_CSD_CARD_TYPE_52 | EXT_CSD_CARD_TYPE_26: @@ -307,6 +311,11 @@ static int mmc_read_ext_csd(struct mmc_card *card, u8 *ext_csd) mmc_hostname(card->host)); } + card->ext_csd.raw_s_a_timeout = ext_csd[EXT_CSD_S_A_TIMEOUT]; + card->ext_csd.raw_erase_timeout_mult = + ext_csd[EXT_CSD_ERASE_TIMEOUT_MULT]; + card->ext_csd.raw_hc_erase_grp_size = + ext_csd[EXT_CSD_HC_ERASE_GRP_SIZE]; if (card->ext_csd.rev >= 3) { u8 sa_shift = ext_csd[EXT_CSD_S_A_TIMEOUT]; card->ext_csd.part_config = ext_csd[EXT_CSD_PART_CONFIG]; @@ -334,6 +343,16 @@ static int mmc_read_ext_csd(struct mmc_card *card, u8 *ext_csd) card->ext_csd.boot_size = ext_csd[EXT_CSD_BOOT_MULT] << 17; } + card->ext_csd.raw_hc_erase_gap_size = + ext_csd[EXT_CSD_PARTITION_ATTRIBUTE]; + card->ext_csd.raw_sec_trim_mult = + ext_csd[EXT_CSD_SEC_TRIM_MULT]; + card->ext_csd.raw_sec_erase_mult = + ext_csd[EXT_CSD_SEC_ERASE_MULT]; + card->ext_csd.raw_sec_feature_support = + ext_csd[EXT_CSD_SEC_FEATURE_SUPPORT]; + card->ext_csd.raw_trim_mult = + ext_csd[EXT_CSD_TRIM_MULT]; if (card->ext_csd.rev >= 4) { /* * Enhanced area feature support -- check whether the eMMC @@ -341,7 +360,7 @@ static int mmc_read_ext_csd(struct mmc_card *card, u8 *ext_csd) * area offset and size to user by adding sysfs interface. */ if ((ext_csd[EXT_CSD_PARTITION_SUPPORT] & 0x2) && - (ext_csd[EXT_CSD_PARTITION_ATTRIBUTE] & 0x1)) { + (ext_csd[EXT_CSD_PARTITION_ATTRIBUTE] & 0x1)) { u8 hc_erase_grp_sz = ext_csd[EXT_CSD_HC_ERASE_GRP_SIZE]; u8 hc_wp_grp_sz = @@ -401,17 +420,17 @@ static inline void mmc_free_ext_csd(u8 *ext_csd) } -static int mmc_compare_ext_csds(struct mmc_card *card, u8 *ext_csd, - unsigned bus_width) +static int mmc_compare_ext_csds(struct mmc_card *card, unsigned bus_width) { u8 *bw_ext_csd; int err; + if (bus_width == MMC_BUS_WIDTH_1) + return 0; + err = mmc_get_ext_csd(card, &bw_ext_csd); - if (err) - return err; - if ((ext_csd == NULL || bw_ext_csd == NULL)) { + if (err || bw_ext_csd == NULL) { if (bus_width != MMC_BUS_WIDTH_1) err = -EINVAL; goto out; @@ -421,35 +440,40 @@ static int mmc_compare_ext_csds(struct mmc_card *card, u8 *ext_csd, goto out; /* only compare read only fields */ - err = (!(ext_csd[EXT_CSD_PARTITION_SUPPORT] == + err = (!(card->ext_csd.raw_partition_support == bw_ext_csd[EXT_CSD_PARTITION_SUPPORT]) && - (ext_csd[EXT_CSD_ERASED_MEM_CONT] == + (card->ext_csd.raw_erased_mem_count == bw_ext_csd[EXT_CSD_ERASED_MEM_CONT]) && - (ext_csd[EXT_CSD_REV] == + (card->ext_csd.rev == bw_ext_csd[EXT_CSD_REV]) && - (ext_csd[EXT_CSD_STRUCTURE] == + (card->ext_csd.raw_ext_csd_structure == bw_ext_csd[EXT_CSD_STRUCTURE]) && - (ext_csd[EXT_CSD_CARD_TYPE] == + (card->ext_csd.raw_card_type == bw_ext_csd[EXT_CSD_CARD_TYPE]) && - (ext_csd[EXT_CSD_S_A_TIMEOUT] == + (card->ext_csd.raw_s_a_timeout == bw_ext_csd[EXT_CSD_S_A_TIMEOUT]) && - (ext_csd[EXT_CSD_HC_WP_GRP_SIZE] == + (card->ext_csd.raw_hc_erase_gap_size == bw_ext_csd[EXT_CSD_HC_WP_GRP_SIZE]) && - (ext_csd[EXT_CSD_ERASE_TIMEOUT_MULT] == + (card->ext_csd.raw_erase_timeout_mult == bw_ext_csd[EXT_CSD_ERASE_TIMEOUT_MULT]) && - (ext_csd[EXT_CSD_HC_ERASE_GRP_SIZE] == + (card->ext_csd.raw_hc_erase_grp_size == bw_ext_csd[EXT_CSD_HC_ERASE_GRP_SIZE]) && - (ext_csd[EXT_CSD_SEC_TRIM_MULT] == + (card->ext_csd.raw_sec_trim_mult == bw_ext_csd[EXT_CSD_SEC_TRIM_MULT]) && - (ext_csd[EXT_CSD_SEC_ERASE_MULT] == + (card->ext_csd.raw_sec_erase_mult == bw_ext_csd[EXT_CSD_SEC_ERASE_MULT]) && - (ext_csd[EXT_CSD_SEC_FEATURE_SUPPORT] == + (card->ext_csd.raw_sec_feature_support == bw_ext_csd[EXT_CSD_SEC_FEATURE_SUPPORT]) && - (ext_csd[EXT_CSD_TRIM_MULT] == + (card->ext_csd.raw_trim_mult == bw_ext_csd[EXT_CSD_TRIM_MULT]) && - memcmp(&ext_csd[EXT_CSD_SEC_CNT], - &bw_ext_csd[EXT_CSD_SEC_CNT], - 4) != 0); + (card->ext_csd.raw_sectors[0] == + bw_ext_csd[EXT_CSD_SEC_CNT + 0]) && + (card->ext_csd.raw_sectors[1] == + bw_ext_csd[EXT_CSD_SEC_CNT + 1]) && + (card->ext_csd.raw_sectors[2] == + bw_ext_csd[EXT_CSD_SEC_CNT + 2]) && + (card->ext_csd.raw_sectors[3] == + bw_ext_csd[EXT_CSD_SEC_CNT + 3])); if (err) err = -EINVAL; @@ -770,7 +794,6 @@ static int mmc_init_card(struct mmc_host *host, u32 ocr, */ if (!(host->caps & MMC_CAP_BUS_WIDTH_TEST)) err = mmc_compare_ext_csds(card, - ext_csd, bus_width); else err = mmc_bus_test(card, bus_width); diff --git a/drivers/mmc/core/sd.c b/drivers/mmc/core/sd.c index ff2774128aa..633975ff2bb 100644 --- a/drivers/mmc/core/sd.c +++ b/drivers/mmc/core/sd.c @@ -409,52 +409,62 @@ out: static int sd_select_driver_type(struct mmc_card *card, u8 *status) { - int host_drv_type = 0, card_drv_type = 0; + int host_drv_type = SD_DRIVER_TYPE_B; + int card_drv_type = SD_DRIVER_TYPE_B; + int drive_strength; int err; /* * If the host doesn't support any of the Driver Types A,C or D, - * default Driver Type B is used. + * or there is no board specific handler then default Driver + * Type B is used. */ if (!(card->host->caps & (MMC_CAP_DRIVER_TYPE_A | MMC_CAP_DRIVER_TYPE_C | MMC_CAP_DRIVER_TYPE_D))) return 0; - if (card->host->caps & MMC_CAP_DRIVER_TYPE_A) { - host_drv_type = MMC_SET_DRIVER_TYPE_A; - if (card->sw_caps.sd3_drv_type & SD_DRIVER_TYPE_A) - card_drv_type = MMC_SET_DRIVER_TYPE_A; - else if (card->sw_caps.sd3_drv_type & SD_DRIVER_TYPE_B) - card_drv_type = MMC_SET_DRIVER_TYPE_B; - else if (card->sw_caps.sd3_drv_type & SD_DRIVER_TYPE_C) - card_drv_type = MMC_SET_DRIVER_TYPE_C; - } else if (card->host->caps & MMC_CAP_DRIVER_TYPE_C) { - host_drv_type = MMC_SET_DRIVER_TYPE_C; - if (card->sw_caps.sd3_drv_type & SD_DRIVER_TYPE_C) - card_drv_type = MMC_SET_DRIVER_TYPE_C; - } else if (!(card->host->caps & MMC_CAP_DRIVER_TYPE_D)) { - /* - * If we are here, that means only the default driver type - * B is supported by the host. - */ - host_drv_type = MMC_SET_DRIVER_TYPE_B; - if (card->sw_caps.sd3_drv_type & SD_DRIVER_TYPE_B) - card_drv_type = MMC_SET_DRIVER_TYPE_B; - else if (card->sw_caps.sd3_drv_type & SD_DRIVER_TYPE_C) - card_drv_type = MMC_SET_DRIVER_TYPE_C; - } + if (!card->host->ops->select_drive_strength) + return 0; + + if (card->host->caps & MMC_CAP_DRIVER_TYPE_A) + host_drv_type |= SD_DRIVER_TYPE_A; + + if (card->host->caps & MMC_CAP_DRIVER_TYPE_C) + host_drv_type |= SD_DRIVER_TYPE_C; + + if (card->host->caps & MMC_CAP_DRIVER_TYPE_D) + host_drv_type |= SD_DRIVER_TYPE_D; + + if (card->sw_caps.sd3_drv_type & SD_DRIVER_TYPE_A) + card_drv_type |= SD_DRIVER_TYPE_A; + + if (card->sw_caps.sd3_drv_type & SD_DRIVER_TYPE_C) + card_drv_type |= SD_DRIVER_TYPE_C; + + if (card->sw_caps.sd3_drv_type & SD_DRIVER_TYPE_D) + card_drv_type |= SD_DRIVER_TYPE_D; + + /* + * The drive strength that the hardware can support + * depends on the board design. Pass the appropriate + * information and let the hardware specific code + * return what is possible given the options + */ + drive_strength = card->host->ops->select_drive_strength( + card->sw_caps.uhs_max_dtr, + host_drv_type, card_drv_type); - err = mmc_sd_switch(card, 1, 2, card_drv_type, status); + err = mmc_sd_switch(card, 1, 2, drive_strength, status); if (err) return err; - if ((status[15] & 0xF) != card_drv_type) { - printk(KERN_WARNING "%s: Problem setting driver strength!\n", + if ((status[15] & 0xF) != drive_strength) { + printk(KERN_WARNING "%s: Problem setting drive strength!\n", mmc_hostname(card->host)); return 0; } - mmc_set_driver_type(card->host, host_drv_type); + mmc_set_driver_type(card->host, drive_strength); return 0; } diff --git a/drivers/mmc/core/sdio.c b/drivers/mmc/core/sdio.c index 4d0c15bfa51..262fff01917 100644 --- a/drivers/mmc/core/sdio.c +++ b/drivers/mmc/core/sdio.c @@ -691,15 +691,54 @@ static int mmc_sdio_resume(struct mmc_host *host) static int mmc_sdio_power_restore(struct mmc_host *host) { int ret; + u32 ocr; BUG_ON(!host); BUG_ON(!host->card); mmc_claim_host(host); + + /* + * Reset the card by performing the same steps that are taken by + * mmc_rescan_try_freq() and mmc_attach_sdio() during a "normal" probe. + * + * sdio_reset() is technically not needed. Having just powered up the + * hardware, it should already be in reset state. However, some + * platforms (such as SD8686 on OLPC) do not instantly cut power, + * meaning that a reset is required when restoring power soon after + * powering off. It is harmless in other cases. + * + * The CMD5 reset (mmc_send_io_op_cond()), according to the SDIO spec, + * is not necessary for non-removable cards. However, it is required + * for OLPC SD8686 (which expects a [CMD5,5,3,7] init sequence), and + * harmless in other situations. + * + * With these steps taken, mmc_select_voltage() is also required to + * restore the correct voltage setting of the card. + */ + sdio_reset(host); + mmc_go_idle(host); + mmc_send_if_cond(host, host->ocr_avail); + + ret = mmc_send_io_op_cond(host, 0, &ocr); + if (ret) + goto out; + + if (host->ocr_avail_sdio) + host->ocr_avail = host->ocr_avail_sdio; + + host->ocr = mmc_select_voltage(host, ocr & ~0x7F); + if (!host->ocr) { + ret = -EINVAL; + goto out; + } + ret = mmc_sdio_init_card(host, host->ocr, host->card, mmc_card_keep_power(host)); if (!ret && host->sdio_irqs) mmc_signal_sdio_irq(host); + +out: mmc_release_host(host); return ret; diff --git a/drivers/mmc/core/sdio_bus.c b/drivers/mmc/core/sdio_bus.c index d29b9c36919..e4e6822d09e 100644 --- a/drivers/mmc/core/sdio_bus.c +++ b/drivers/mmc/core/sdio_bus.c @@ -167,11 +167,8 @@ static int sdio_bus_remove(struct device *dev) int ret = 0; /* Make sure card is powered before invoking ->remove() */ - if (func->card->host->caps & MMC_CAP_POWER_OFF_CARD) { - ret = pm_runtime_get_sync(dev); - if (ret < 0) - goto out; - } + if (func->card->host->caps & MMC_CAP_POWER_OFF_CARD) + pm_runtime_get_sync(dev); drv->remove(func); @@ -189,9 +186,8 @@ static int sdio_bus_remove(struct device *dev) /* Then undo the runtime PM settings in sdio_bus_probe() */ if (func->card->host->caps & MMC_CAP_POWER_OFF_CARD) - pm_runtime_put_noidle(dev); + pm_runtime_put_sync(dev); -out: return ret; } |