diff options
Diffstat (limited to 'drivers/mmc/host/atmel-mci.c')
| -rw-r--r-- | drivers/mmc/host/atmel-mci.c | 78 |
1 files changed, 52 insertions, 26 deletions
diff --git a/drivers/mmc/host/atmel-mci.c b/drivers/mmc/host/atmel-mci.c index e4449a54ae8..e94476beca1 100644 --- a/drivers/mmc/host/atmel-mci.c +++ b/drivers/mmc/host/atmel-mci.c @@ -24,6 +24,7 @@ #include <linux/seq_file.h> #include <linux/slab.h> #include <linux/stat.h> +#include <linux/types.h> #include <linux/mmc/host.h> #include <linux/mmc/sdio.h> @@ -76,6 +77,7 @@ struct atmel_mci_caps { bool has_cstor_reg; bool has_highspeed; bool has_rwproof; + bool has_odd_clk_div; }; struct atmel_mci_dma { @@ -173,6 +175,7 @@ struct atmel_mci { struct atmel_mci_dma dma; struct dma_chan *data_chan; + struct dma_slave_config dma_conf; u32 cmd_status; u32 data_status; @@ -480,7 +483,14 @@ err: static inline unsigned int atmci_ns_to_clocks(struct atmel_mci *host, unsigned int ns) { - return (ns * (host->bus_hz / 1000000) + 999) / 1000; + /* + * It is easier here to use us instead of ns for the timeout, + * it prevents from overflows during calculation. + */ + unsigned int us = DIV_ROUND_UP(ns, 1000); + + /* Maximum clock frequency is host->bus_hz/2 */ + return us * (DIV_ROUND_UP(host->bus_hz, 2000000)); } static void atmci_set_timeout(struct atmel_mci *host, @@ -863,16 +873,17 @@ atmci_prepare_data_dma(struct atmel_mci *host, struct mmc_data *data) if (data->flags & MMC_DATA_READ) { direction = DMA_FROM_DEVICE; - slave_dirn = DMA_DEV_TO_MEM; + host->dma_conf.direction = slave_dirn = DMA_DEV_TO_MEM; } else { direction = DMA_TO_DEVICE; - slave_dirn = DMA_MEM_TO_DEV; + host->dma_conf.direction = slave_dirn = DMA_MEM_TO_DEV; } sglen = dma_map_sg(chan->device->dev, data->sg, data->sg_len, direction); - desc = chan->device->device_prep_slave_sg(chan, + dmaengine_slave_config(chan, &host->dma_conf); + desc = dmaengine_prep_slave_sg(chan, data->sg, sglen, slave_dirn, DMA_PREP_INTERRUPT | DMA_CTRL_ACK); if (!desc) @@ -1124,16 +1135,27 @@ static void atmci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) } /* Calculate clock divider */ - clkdiv = DIV_ROUND_UP(host->bus_hz, 2 * clock_min) - 1; - if (clkdiv > 255) { - dev_warn(&mmc->class_dev, - "clock %u too slow; using %lu\n", - clock_min, host->bus_hz / (2 * 256)); - clkdiv = 255; + if (host->caps.has_odd_clk_div) { + clkdiv = DIV_ROUND_UP(host->bus_hz, clock_min) - 2; + if (clkdiv > 511) { + dev_warn(&mmc->class_dev, + "clock %u too slow; using %lu\n", + clock_min, host->bus_hz / (511 + 2)); + clkdiv = 511; + } + host->mode_reg = ATMCI_MR_CLKDIV(clkdiv >> 1) + | ATMCI_MR_CLKODD(clkdiv & 1); + } else { + clkdiv = DIV_ROUND_UP(host->bus_hz, 2 * clock_min) - 1; + if (clkdiv > 255) { + dev_warn(&mmc->class_dev, + "clock %u too slow; using %lu\n", + clock_min, host->bus_hz / (2 * 256)); + clkdiv = 255; + } + host->mode_reg = ATMCI_MR_CLKDIV(clkdiv); } - host->mode_reg = ATMCI_MR_CLKDIV(clkdiv); - /* * WRPROOF and RDPROOF prevent overruns/underruns by * stopping the clock when the FIFO is full/empty. @@ -1960,10 +1982,6 @@ static bool atmci_configure_dma(struct atmel_mci *host) if (pdata && find_slave_dev(pdata->dma_slave)) { dma_cap_mask_t mask; - setup_dma_addr(pdata->dma_slave, - host->mapbase + ATMCI_TDR, - host->mapbase + ATMCI_RDR); - /* Try to grab a DMA channel */ dma_cap_zero(mask); dma_cap_set(DMA_SLAVE, mask); @@ -1975,8 +1993,16 @@ static bool atmci_configure_dma(struct atmel_mci *host) return false; } else { dev_info(&host->pdev->dev, - "Using %s for DMA transfers\n", + "using %s for DMA transfers\n", dma_chan_name(host->dma.chan)); + + host->dma_conf.src_addr = host->mapbase + ATMCI_RDR; + host->dma_conf.src_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES; + host->dma_conf.src_maxburst = 1; + host->dma_conf.dst_addr = host->mapbase + ATMCI_TDR; + host->dma_conf.dst_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES; + host->dma_conf.dst_maxburst = 1; + host->dma_conf.device_fc = false; return true; } } @@ -2000,35 +2026,35 @@ static void __init atmci_get_cap(struct atmel_mci *host) "version: 0x%x\n", version); host->caps.has_dma = 0; - host->caps.has_pdc = 0; + host->caps.has_pdc = 1; host->caps.has_cfg_reg = 0; host->caps.has_cstor_reg = 0; host->caps.has_highspeed = 0; host->caps.has_rwproof = 0; + host->caps.has_odd_clk_div = 0; /* keep only major version number */ switch (version & 0xf00) { - case 0x100: - case 0x200: - host->caps.has_pdc = 1; - host->caps.has_rwproof = 1; - break; - case 0x300: - case 0x400: case 0x500: + host->caps.has_odd_clk_div = 1; + case 0x400: + case 0x300: #ifdef CONFIG_AT_HDMAC host->caps.has_dma = 1; #else - host->caps.has_dma = 0; dev_info(&host->pdev->dev, "has dma capability but dma engine is not selected, then use pio\n"); #endif + host->caps.has_pdc = 0; host->caps.has_cfg_reg = 1; host->caps.has_cstor_reg = 1; host->caps.has_highspeed = 1; + case 0x200: host->caps.has_rwproof = 1; + case 0x100: break; default: + host->caps.has_pdc = 0; dev_warn(&host->pdev->dev, "Unmanaged mci version, set minimum capabilities\n"); break; |