diff options
Diffstat (limited to 'drivers/mmc/host/atmel-mci.c')
| -rw-r--r-- | drivers/mmc/host/atmel-mci.c | 469 |
1 files changed, 337 insertions, 132 deletions
diff --git a/drivers/mmc/host/atmel-mci.c b/drivers/mmc/host/atmel-mci.c index e94476beca1..420aca642b1 100644 --- a/drivers/mmc/host/atmel-mci.c +++ b/drivers/mmc/host/atmel-mci.c @@ -45,19 +45,19 @@ #define ATMCI_DMA_THRESHOLD 16 enum { - EVENT_CMD_COMPLETE = 0, + EVENT_CMD_RDY = 0, EVENT_XFER_COMPLETE, - EVENT_DATA_COMPLETE, + EVENT_NOTBUSY, EVENT_DATA_ERROR, }; enum atmel_mci_state { STATE_IDLE = 0, STATE_SENDING_CMD, - STATE_SENDING_DATA, - STATE_DATA_BUSY, + STATE_DATA_XFER, + STATE_WAITING_NOTBUSY, STATE_SENDING_STOP, - STATE_DATA_ERROR, + STATE_END_REQUEST, }; enum atmci_xfer_dir { @@ -78,6 +78,9 @@ struct atmel_mci_caps { bool has_highspeed; bool has_rwproof; bool has_odd_clk_div; + bool has_bad_data_ordering; + bool need_reset_after_xfer; + bool need_blksz_mul_4; }; struct atmel_mci_dma { @@ -91,6 +94,11 @@ struct atmel_mci_dma { * @regs: Pointer to MMIO registers. * @sg: Scatterlist entry currently being processed by PIO or PDC code. * @pio_offset: Offset into the current scatterlist entry. + * @buffer: Buffer used if we don't have the r/w proof capability. We + * don't have the time to switch pdc buffers so we have to use only + * one buffer for the full transaction. + * @buf_size: size of the buffer. + * @phys_buf_addr: buffer address needed for pdc. * @cur_slot: The slot which is currently using the controller. * @mrq: The request currently being processed on @cur_slot, * or NULL if the controller is idle. @@ -116,6 +124,7 @@ struct atmel_mci_dma { * @queue: List of slots waiting for access to the controller. * @need_clock_update: Update the clock rate before the next request. * @need_reset: Reset controller before next request. + * @timer: Timer to balance the data timeout error flag which cannot rise. * @mode_reg: Value of the MR register. * @cfg_reg: Value of the CFG register. * @bus_hz: The rate of @mck in Hz. This forms the basis for MMC bus @@ -166,6 +175,9 @@ struct atmel_mci { struct scatterlist *sg; unsigned int pio_offset; + unsigned int *buffer; + unsigned int buf_size; + dma_addr_t buf_phys_addr; struct atmel_mci_slot *cur_slot; struct mmc_request *mrq; @@ -189,6 +201,7 @@ struct atmel_mci { bool need_clock_update; bool need_reset; + struct timer_list timer; u32 mode_reg; u32 cfg_reg; unsigned long bus_hz; @@ -480,6 +493,32 @@ err: dev_err(&mmc->class_dev, "failed to initialize debugfs for slot\n"); } +static inline unsigned int atmci_get_version(struct atmel_mci *host) +{ + return atmci_readl(host, ATMCI_VERSION) & 0x00000fff; +} + +static void atmci_timeout_timer(unsigned long data) +{ + struct atmel_mci *host; + + host = (struct atmel_mci *)data; + + dev_dbg(&host->pdev->dev, "software timeout\n"); + + if (host->mrq->cmd->data) { + host->mrq->cmd->data->error = -ETIMEDOUT; + host->data = NULL; + } else { + host->mrq->cmd->error = -ETIMEDOUT; + host->cmd = NULL; + } + host->need_reset = 1; + host->state = STATE_END_REQUEST; + smp_wmb(); + tasklet_schedule(&host->tasklet); +} + static inline unsigned int atmci_ns_to_clocks(struct atmel_mci *host, unsigned int ns) { @@ -591,6 +630,7 @@ static void atmci_send_command(struct atmel_mci *host, static void atmci_send_stop_cmd(struct atmel_mci *host, struct mmc_data *data) { + dev_dbg(&host->pdev->dev, "send stop command\n"); atmci_send_command(host, data->stop, host->stop_cmdr); atmci_writel(host, ATMCI_IER, ATMCI_CMDRDY); } @@ -603,6 +643,7 @@ static void atmci_pdc_set_single_buf(struct atmel_mci *host, enum atmci_xfer_dir dir, enum atmci_pdc_buf buf_nb) { u32 pointer_reg, counter_reg; + unsigned int buf_size; if (dir == XFER_RECEIVE) { pointer_reg = ATMEL_PDC_RPR; @@ -617,8 +658,15 @@ static void atmci_pdc_set_single_buf(struct atmel_mci *host, counter_reg += ATMEL_PDC_SCND_BUF_OFF; } - atmci_writel(host, pointer_reg, sg_dma_address(host->sg)); - if (host->data_size <= sg_dma_len(host->sg)) { + if (!host->caps.has_rwproof) { + buf_size = host->buf_size; + atmci_writel(host, pointer_reg, host->buf_phys_addr); + } else { + buf_size = sg_dma_len(host->sg); + atmci_writel(host, pointer_reg, sg_dma_address(host->sg)); + } + + if (host->data_size <= buf_size) { if (host->data_size & 0x3) { /* If size is different from modulo 4, transfer bytes */ atmci_writel(host, counter_reg, host->data_size); @@ -670,7 +718,20 @@ static void atmci_pdc_cleanup(struct atmel_mci *host) */ static void atmci_pdc_complete(struct atmel_mci *host) { + int transfer_size = host->data->blocks * host->data->blksz; + int i; + atmci_writel(host, ATMEL_PDC_PTCR, ATMEL_PDC_RXTDIS | ATMEL_PDC_TXTDIS); + + if ((!host->caps.has_rwproof) + && (host->data->flags & MMC_DATA_READ)) { + if (host->caps.has_bad_data_ordering) + for (i = 0; i < transfer_size; i++) + host->buffer[i] = swab32(host->buffer[i]); + sg_copy_from_buffer(host->data->sg, host->data->sg_len, + host->buffer, transfer_size); + } + atmci_pdc_cleanup(host); /* @@ -678,9 +739,10 @@ static void atmci_pdc_complete(struct atmel_mci *host) * to send the stop command or waiting for NBUSY in this case. */ if (host->data) { + dev_dbg(&host->pdev->dev, + "(%s) set pending xfer complete\n", __func__); atmci_set_pending(host, EVENT_XFER_COMPLETE); tasklet_schedule(&host->tasklet); - atmci_writel(host, ATMCI_IER, ATMCI_NOTBUSY); } } @@ -716,6 +778,8 @@ static void atmci_dma_complete(void *arg) * to send the stop command or waiting for NBUSY in this case. */ if (data) { + dev_dbg(&host->pdev->dev, + "(%s) set pending xfer complete\n", __func__); atmci_set_pending(host, EVENT_XFER_COMPLETE); tasklet_schedule(&host->tasklet); @@ -791,6 +855,7 @@ atmci_prepare_data_pdc(struct atmel_mci *host, struct mmc_data *data) u32 iflags, tmp; unsigned int sg_len; enum dma_data_direction dir; + int i; data->error = -EINPROGRESS; @@ -806,7 +871,7 @@ atmci_prepare_data_pdc(struct atmel_mci *host, struct mmc_data *data) iflags |= ATMCI_ENDRX | ATMCI_RXBUFF; } else { dir = DMA_TO_DEVICE; - iflags |= ATMCI_ENDTX | ATMCI_TXBUFE; + iflags |= ATMCI_ENDTX | ATMCI_TXBUFE | ATMCI_BLKE; } /* Set BLKLEN */ @@ -818,6 +883,16 @@ atmci_prepare_data_pdc(struct atmel_mci *host, struct mmc_data *data) /* Configure PDC */ host->data_size = data->blocks * data->blksz; sg_len = dma_map_sg(&host->pdev->dev, data->sg, data->sg_len, dir); + + if ((!host->caps.has_rwproof) + && (host->data->flags & MMC_DATA_WRITE)) { + sg_copy_to_buffer(host->data->sg, host->data->sg_len, + host->buffer, host->data_size); + if (host->caps.has_bad_data_ordering) + for (i = 0; i < host->data_size; i++) + host->buffer[i] = swab32(host->buffer[i]); + } + if (host->data_size) atmci_pdc_set_both_buf(host, ((dir == DMA_FROM_DEVICE) ? XFER_RECEIVE : XFER_TRANSMIT)); @@ -931,6 +1006,8 @@ atmci_submit_data_dma(struct atmel_mci *host, struct mmc_data *data) static void atmci_stop_transfer(struct atmel_mci *host) { + dev_dbg(&host->pdev->dev, + "(%s) set pending xfer complete\n", __func__); atmci_set_pending(host, EVENT_XFER_COMPLETE); atmci_writel(host, ATMCI_IER, ATMCI_NOTBUSY); } @@ -940,8 +1017,7 @@ static void atmci_stop_transfer(struct atmel_mci *host) */ static void atmci_stop_transfer_pdc(struct atmel_mci *host) { - atmci_set_pending(host, EVENT_XFER_COMPLETE); - atmci_writel(host, ATMCI_IER, ATMCI_NOTBUSY); + atmci_writel(host, ATMEL_PDC_PTCR, ATMEL_PDC_RXTDIS | ATMEL_PDC_TXTDIS); } static void atmci_stop_transfer_dma(struct atmel_mci *host) @@ -953,6 +1029,8 @@ static void atmci_stop_transfer_dma(struct atmel_mci *host) atmci_dma_cleanup(host); } else { /* Data transfer was stopped by the interrupt handler */ + dev_dbg(&host->pdev->dev, + "(%s) set pending xfer complete\n", __func__); atmci_set_pending(host, EVENT_XFER_COMPLETE); atmci_writel(host, ATMCI_IER, ATMCI_NOTBUSY); } @@ -977,9 +1055,12 @@ static void atmci_start_request(struct atmel_mci *host, host->pending_events = 0; host->completed_events = 0; + host->cmd_status = 0; host->data_status = 0; - if (host->need_reset) { + dev_dbg(&host->pdev->dev, "start request: cmd %u\n", mrq->cmd->opcode); + + if (host->need_reset || host->caps.need_reset_after_xfer) { iflags = atmci_readl(host, ATMCI_IMR); iflags &= (ATMCI_SDIOIRQA | ATMCI_SDIOIRQB); atmci_writel(host, ATMCI_CR, ATMCI_CR_SWRST); @@ -994,7 +1075,7 @@ static void atmci_start_request(struct atmel_mci *host, iflags = atmci_readl(host, ATMCI_IMR); if (iflags & ~(ATMCI_SDIOIRQA | ATMCI_SDIOIRQB)) - dev_warn(&slot->mmc->class_dev, "WARNING: IMR=0x%08x\n", + dev_dbg(&slot->mmc->class_dev, "WARNING: IMR=0x%08x\n", iflags); if (unlikely(test_and_clear_bit(ATMCI_CARD_NEED_INIT, &slot->flags))) { @@ -1043,6 +1124,8 @@ static void atmci_start_request(struct atmel_mci *host, * prepared yet.) */ atmci_writel(host, ATMCI_IER, iflags); + + mod_timer(&host->timer, jiffies + msecs_to_jiffies(2000)); } static void atmci_queue_request(struct atmel_mci *host, @@ -1057,6 +1140,7 @@ static void atmci_queue_request(struct atmel_mci *host, host->state = STATE_SENDING_CMD; atmci_start_request(host, slot); } else { + dev_dbg(&host->pdev->dev, "queue request\n"); list_add_tail(&slot->queue_node, &host->queue); } spin_unlock_bh(&host->lock); @@ -1069,6 +1153,7 @@ static void atmci_request(struct mmc_host *mmc, struct mmc_request *mrq) struct mmc_data *data; WARN_ON(slot->mrq); + dev_dbg(&host->pdev->dev, "MRQ: cmd %u\n", mrq->cmd->opcode); /* * We may "know" the card is gone even though there's still an @@ -1308,6 +1393,8 @@ static void atmci_request_end(struct atmel_mci *host, struct mmc_request *mrq) host->state = STATE_IDLE; } + del_timer(&host->timer); + spin_unlock(&host->lock); mmc_request_done(prev_mmc, mrq); spin_lock(&host->lock); @@ -1330,21 +1417,13 @@ static void atmci_command_complete(struct atmel_mci *host, cmd->error = -EILSEQ; else if (status & (ATMCI_RINDE | ATMCI_RDIRE | ATMCI_RENDE)) cmd->error = -EIO; - else - cmd->error = 0; - - if (cmd->error) { - dev_dbg(&host->pdev->dev, - "command error: status=0x%08x\n", status); - - if (cmd->data) { - host->stop_transfer(host); - host->data = NULL; - atmci_writel(host, ATMCI_IDR, ATMCI_NOTBUSY - | ATMCI_TXRDY | ATMCI_RXRDY - | ATMCI_DATA_ERROR_FLAGS); + else if (host->mrq->data && (host->mrq->data->blksz & 3)) { + if (host->caps.need_blksz_mul_4) { + cmd->error = -EINVAL; + host->need_reset = 1; } - } + } else + cmd->error = 0; } static void atmci_detect_change(unsigned long data) @@ -1407,23 +1486,21 @@ static void atmci_detect_change(unsigned long data) break; case STATE_SENDING_CMD: mrq->cmd->error = -ENOMEDIUM; - if (!mrq->data) - break; - /* fall through */ - case STATE_SENDING_DATA: + if (mrq->data) + host->stop_transfer(host); + break; + case STATE_DATA_XFER: mrq->data->error = -ENOMEDIUM; host->stop_transfer(host); break; - case STATE_DATA_BUSY: - case STATE_DATA_ERROR: - if (mrq->data->error == -EINPROGRESS) - mrq->data->error = -ENOMEDIUM; - if (!mrq->stop) - break; - /* fall through */ + case STATE_WAITING_NOTBUSY: + mrq->data->error = -ENOMEDIUM; + break; case STATE_SENDING_STOP: mrq->stop->error = -ENOMEDIUM; break; + case STATE_END_REQUEST: + break; } atmci_request_end(host, mrq); @@ -1451,7 +1528,6 @@ static void atmci_tasklet_func(unsigned long priv) struct atmel_mci *host = (struct atmel_mci *)priv; struct mmc_request *mrq = host->mrq; struct mmc_data *data = host->data; - struct mmc_command *cmd = host->cmd; enum atmel_mci_state state = host->state; enum atmel_mci_state prev_state; u32 status; @@ -1467,107 +1543,186 @@ static void atmci_tasklet_func(unsigned long priv) do { prev_state = state; + dev_dbg(&host->pdev->dev, "FSM: state=%d\n", state); switch (state) { case STATE_IDLE: break; case STATE_SENDING_CMD: + /* + * Command has been sent, we are waiting for command + * ready. Then we have three next states possible: + * END_REQUEST by default, WAITING_NOTBUSY if it's a + * command needing it or DATA_XFER if there is data. + */ + dev_dbg(&host->pdev->dev, "FSM: cmd ready?\n"); if (!atmci_test_and_clear_pending(host, - EVENT_CMD_COMPLETE)) + EVENT_CMD_RDY)) break; + dev_dbg(&host->pdev->dev, "set completed cmd ready\n"); host->cmd = NULL; - atmci_set_completed(host, EVENT_CMD_COMPLETE); + atmci_set_completed(host, EVENT_CMD_RDY); atmci_command_complete(host, mrq->cmd); - if (!mrq->data || cmd->error) { - atmci_request_end(host, host->mrq); - goto unlock; - } + if (mrq->data) { + dev_dbg(&host->pdev->dev, + "command with data transfer"); + /* + * If there is a command error don't start + * data transfer. + */ + if (mrq->cmd->error) { + host->stop_transfer(host); + host->data = NULL; + atmci_writel(host, ATMCI_IDR, + ATMCI_TXRDY | ATMCI_RXRDY + | ATMCI_DATA_ERROR_FLAGS); + state = STATE_END_REQUEST; + } else + state = STATE_DATA_XFER; + } else if ((!mrq->data) && (mrq->cmd->flags & MMC_RSP_BUSY)) { + dev_dbg(&host->pdev->dev, + "command response need waiting notbusy"); + atmci_writel(host, ATMCI_IER, ATMCI_NOTBUSY); + state = STATE_WAITING_NOTBUSY; + } else + state = STATE_END_REQUEST; - prev_state = state = STATE_SENDING_DATA; - /* fall through */ + break; - case STATE_SENDING_DATA: + case STATE_DATA_XFER: if (atmci_test_and_clear_pending(host, EVENT_DATA_ERROR)) { - host->stop_transfer(host); - if (data->stop) - atmci_send_stop_cmd(host, data); - state = STATE_DATA_ERROR; + dev_dbg(&host->pdev->dev, "set completed data error\n"); + atmci_set_completed(host, EVENT_DATA_ERROR); + state = STATE_END_REQUEST; break; } + /* + * A data transfer is in progress. The event expected + * to move to the next state depends of data transfer + * type (PDC or DMA). Once transfer done we can move + * to the next step which is WAITING_NOTBUSY in write + * case and directly SENDING_STOP in read case. + */ + dev_dbg(&host->pdev->dev, "FSM: xfer complete?\n"); if (!atmci_test_and_clear_pending(host, EVENT_XFER_COMPLETE)) break; + dev_dbg(&host->pdev->dev, + "(%s) set completed xfer complete\n", + __func__); atmci_set_completed(host, EVENT_XFER_COMPLETE); - prev_state = state = STATE_DATA_BUSY; - /* fall through */ - case STATE_DATA_BUSY: - if (!atmci_test_and_clear_pending(host, - EVENT_DATA_COMPLETE)) - break; - - host->data = NULL; - atmci_set_completed(host, EVENT_DATA_COMPLETE); - status = host->data_status; - if (unlikely(status & ATMCI_DATA_ERROR_FLAGS)) { - if (status & ATMCI_DTOE) { - dev_dbg(&host->pdev->dev, - "data timeout error\n"); - data->error = -ETIMEDOUT; - } else if (status & ATMCI_DCRCE) { - dev_dbg(&host->pdev->dev, - "data CRC error\n"); - data->error = -EILSEQ; - } else { - dev_dbg(&host->pdev->dev, - "data FIFO error (status=%08x)\n", - status); - data->error = -EIO; - } + if (host->data->flags & MMC_DATA_WRITE) { + atmci_writel(host, ATMCI_IER, ATMCI_NOTBUSY); + state = STATE_WAITING_NOTBUSY; + } else if (host->mrq->stop) { + atmci_writel(host, ATMCI_IER, ATMCI_CMDRDY); + atmci_send_stop_cmd(host, data); + state = STATE_SENDING_STOP; } else { + host->data = NULL; data->bytes_xfered = data->blocks * data->blksz; data->error = 0; - atmci_writel(host, ATMCI_IDR, ATMCI_DATA_ERROR_FLAGS); + state = STATE_END_REQUEST; } + break; - if (!data->stop) { - atmci_request_end(host, host->mrq); - goto unlock; - } + case STATE_WAITING_NOTBUSY: + /* + * We can be in the state for two reasons: a command + * requiring waiting not busy signal (stop command + * included) or a write operation. In the latest case, + * we need to send a stop command. + */ + dev_dbg(&host->pdev->dev, "FSM: not busy?\n"); + if (!atmci_test_and_clear_pending(host, + EVENT_NOTBUSY)) + break; - prev_state = state = STATE_SENDING_STOP; - if (!data->error) - atmci_send_stop_cmd(host, data); - /* fall through */ + dev_dbg(&host->pdev->dev, "set completed not busy\n"); + atmci_set_completed(host, EVENT_NOTBUSY); + + if (host->data) { + /* + * For some commands such as CMD53, even if + * there is data transfer, there is no stop + * command to send. + */ + if (host->mrq->stop) { + atmci_writel(host, ATMCI_IER, + ATMCI_CMDRDY); + atmci_send_stop_cmd(host, data); + state = STATE_SENDING_STOP; + } else { + host->data = NULL; + data->bytes_xfered = data->blocks + * data->blksz; + data->error = 0; + state = STATE_END_REQUEST; + } + } else + state = STATE_END_REQUEST; + break; case STATE_SENDING_STOP: + /* + * In this state, it is important to set host->data to + * NULL (which is tested in the waiting notbusy state) + * in order to go to the end request state instead of + * sending stop again. + */ + dev_dbg(&host->pdev->dev, "FSM: cmd ready?\n"); if (!atmci_test_and_clear_pending(host, - EVENT_CMD_COMPLETE)) + EVENT_CMD_RDY)) break; + dev_dbg(&host->pdev->dev, "FSM: cmd ready\n"); host->cmd = NULL; + host->data = NULL; + data->bytes_xfered = data->blocks * data->blksz; + data->error = 0; atmci_command_complete(host, mrq->stop); - atmci_request_end(host, host->mrq); - goto unlock; + if (mrq->stop->error) { + host->stop_transfer(host); + atmci_writel(host, ATMCI_IDR, + ATMCI_TXRDY | ATMCI_RXRDY + | ATMCI_DATA_ERROR_FLAGS); + state = STATE_END_REQUEST; + } else { + atmci_writel(host, ATMCI_IER, ATMCI_NOTBUSY); + state = STATE_WAITING_NOTBUSY; + } + break; - case STATE_DATA_ERROR: - if (!atmci_test_and_clear_pending(host, - EVENT_XFER_COMPLETE)) - break; + case STATE_END_REQUEST: + atmci_writel(host, ATMCI_IDR, ATMCI_TXRDY | ATMCI_RXRDY + | ATMCI_DATA_ERROR_FLAGS); + status = host->data_status; + if (unlikely(status)) { + host->stop_transfer(host); + host->data = NULL; + if (status & ATMCI_DTOE) { + data->error = -ETIMEDOUT; + } else if (status & ATMCI_DCRCE) { + data->error = -EILSEQ; + } else { + data->error = -EIO; + } + } - state = STATE_DATA_BUSY; + atmci_request_end(host, host->mrq); + state = STATE_IDLE; break; } } while (state != prev_state); host->state = state; -unlock: spin_unlock(&host->lock); } @@ -1620,9 +1775,6 @@ static void atmci_read_data_pio(struct atmel_mci *host) | ATMCI_DATA_ERROR_FLAGS)); host->data_status = status; data->bytes_xfered += nbytes; - smp_wmb(); - atmci_set_pending(host, EVENT_DATA_ERROR); - tasklet_schedule(&host->tasklet); return; } } while (status & ATMCI_RXRDY); @@ -1691,9 +1843,6 @@ static void atmci_write_data_pio(struct atmel_mci *host) | ATMCI_DATA_ERROR_FLAGS)); host->data_status = status; data->bytes_xfered += nbytes; - smp_wmb(); - atmci_set_pending(host, EVENT_DATA_ERROR); - tasklet_schedule(&host->tasklet); return; } } while (status & ATMCI_TXRDY); @@ -1711,16 +1860,6 @@ done: atmci_set_pending(host, EVENT_XFER_COMPLETE); } -static void atmci_cmd_interrupt(struct atmel_mci *host, u32 status) -{ - atmci_writel(host, ATMCI_IDR, ATMCI_CMDRDY); - - host->cmd_status = status; - smp_wmb(); - atmci_set_pending(host, EVENT_CMD_COMPLETE); - tasklet_schedule(&host->tasklet); -} - static void atmci_sdio_interrupt(struct atmel_mci *host, u32 status) { int i; @@ -1748,17 +1887,21 @@ static irqreturn_t atmci_interrupt(int irq, void *dev_id) break; if (pending & ATMCI_DATA_ERROR_FLAGS) { + dev_dbg(&host->pdev->dev, "IRQ: data error\n"); atmci_writel(host, ATMCI_IDR, ATMCI_DATA_ERROR_FLAGS - | ATMCI_RXRDY | ATMCI_TXRDY); - pending &= atmci_readl(host, ATMCI_IMR); + | ATMCI_RXRDY | ATMCI_TXRDY + | ATMCI_ENDRX | ATMCI_ENDTX + | ATMCI_RXBUFF | ATMCI_TXBUFE); host->data_status = status; + dev_dbg(&host->pdev->dev, "set pending data error\n"); smp_wmb(); atmci_set_pending(host, EVENT_DATA_ERROR); tasklet_schedule(&host->tasklet); } if (pending & ATMCI_TXBUFE) { + dev_dbg(&host->pdev->dev, "IRQ: tx buffer empty\n"); atmci_writel(host, ATMCI_IDR, ATMCI_TXBUFE); atmci_writel(host, ATMCI_IDR, ATMCI_ENDTX); /* @@ -1774,6 +1917,7 @@ static irqreturn_t atmci_interrupt(int irq, void *dev_id) atmci_pdc_complete(host); } } else if (pending & ATMCI_ENDTX) { + dev_dbg(&host->pdev->dev, "IRQ: end of tx buffer\n"); atmci_writel(host, ATMCI_IDR, ATMCI_ENDTX); if (host->data_size) { @@ -1784,6 +1928,7 @@ static irqreturn_t atmci_interrupt(int irq, void *dev_id) } if (pending & ATMCI_RXBUFF) { + dev_dbg(&host->pdev->dev, "IRQ: rx buffer full\n"); atmci_writel(host, ATMCI_IDR, ATMCI_RXBUFF); atmci_writel(host, ATMCI_IDR, ATMCI_ENDRX); /* @@ -1799,6 +1944,7 @@ static irqreturn_t atmci_interrupt(int irq, void *dev_id) atmci_pdc_complete(host); } } else if (pending & ATMCI_ENDRX) { + dev_dbg(&host->pdev->dev, "IRQ: end of rx buffer\n"); atmci_writel(host, ATMCI_IDR, ATMCI_ENDRX); if (host->data_size) { @@ -1808,23 +1954,44 @@ static irqreturn_t atmci_interrupt(int irq, void *dev_id) } } + /* + * First mci IPs, so mainly the ones having pdc, have some + * issues with the notbusy signal. You can't get it after + * data transmission if you have not sent a stop command. + * The appropriate workaround is to use the BLKE signal. + */ + if (pending & ATMCI_BLKE) { + dev_dbg(&host->pdev->dev, "IRQ: blke\n"); + atmci_writel(host, ATMCI_IDR, ATMCI_BLKE); + smp_wmb(); + dev_dbg(&host->pdev->dev, "set pending notbusy\n"); + atmci_set_pending(host, EVENT_NOTBUSY); + tasklet_schedule(&host->tasklet); + } if (pending & ATMCI_NOTBUSY) { - atmci_writel(host, ATMCI_IDR, - ATMCI_DATA_ERROR_FLAGS | ATMCI_NOTBUSY); - if (!host->data_status) - host->data_status = status; + dev_dbg(&host->pdev->dev, "IRQ: not_busy\n"); + atmci_writel(host, ATMCI_IDR, ATMCI_NOTBUSY); smp_wmb(); - atmci_set_pending(host, EVENT_DATA_COMPLETE); + dev_dbg(&host->pdev->dev, "set pending notbusy\n"); + atmci_set_pending(host, EVENT_NOTBUSY); tasklet_schedule(&host->tasklet); } + if (pending & ATMCI_RXRDY) atmci_read_data_pio(host); if (pending & ATMCI_TXRDY) atmci_write_data_pio(host); - if (pending & ATMCI_CMDRDY) - atmci_cmd_interrupt(host, status); + if (pending & ATMCI_CMDRDY) { + dev_dbg(&host->pdev->dev, "IRQ: cmd ready\n"); + atmci_writel(host, ATMCI_IDR, ATMCI_CMDRDY); + host->cmd_status = status; + smp_wmb(); + dev_dbg(&host->pdev->dev, "set pending cmd rdy\n"); + atmci_set_pending(host, EVENT_CMD_RDY); + tasklet_schedule(&host->tasklet); + } if (pending & (ATMCI_SDIOIRQA | ATMCI_SDIOIRQB)) atmci_sdio_interrupt(host, status); @@ -1877,13 +2044,26 @@ static int __init atmci_init_slot(struct atmel_mci *host, mmc->caps |= MMC_CAP_SDIO_IRQ; if (host->caps.has_highspeed) mmc->caps |= MMC_CAP_SD_HIGHSPEED; - if (slot_data->bus_width >= 4) + /* + * Without the read/write proof capability, it is strongly suggested to + * use only one bit for data to prevent fifo underruns and overruns + * which will corrupt data. + */ + if ((slot_data->bus_width >= 4) && host->caps.has_rwproof) mmc->caps |= MMC_CAP_4_BIT_DATA; - mmc->max_segs = 64; - mmc->max_req_size = 32768 * 512; - mmc->max_blk_size = 32768; - mmc->max_blk_count = 512; + if (atmci_get_version(host) < 0x200) { + mmc->max_segs = 256; + mmc->max_blk_size = 4095; + mmc->max_blk_count = 256; + mmc->max_req_size = mmc->max_blk_size * mmc->max_blk_count; + mmc->max_seg_size = mmc->max_blk_size * mmc->max_segs; + } else { + mmc->max_segs = 64; + mmc->max_req_size = 32768 * 512; + mmc->max_blk_size = 32768; + mmc->max_blk_count = 512; + } /* Assume card is present initially */ set_bit(ATMCI_CARD_PRESENT, &slot->flags); @@ -2007,11 +2187,6 @@ static bool atmci_configure_dma(struct atmel_mci *host) } } -static inline unsigned int atmci_get_version(struct atmel_mci *host) -{ - return atmci_readl(host, ATMCI_VERSION) & 0x00000fff; -} - /* * HSMCI (High Speed MCI) module is not fully compatible with MCI module. * HSMCI provides DMA support and a new config register but no more supports @@ -2032,6 +2207,9 @@ static void __init atmci_get_cap(struct atmel_mci *host) host->caps.has_highspeed = 0; host->caps.has_rwproof = 0; host->caps.has_odd_clk_div = 0; + host->caps.has_bad_data_ordering = 1; + host->caps.need_reset_after_xfer = 1; + host->caps.need_blksz_mul_4 = 1; /* keep only major version number */ switch (version & 0xf00) { @@ -2051,7 +2229,11 @@ static void __init atmci_get_cap(struct atmel_mci *host) host->caps.has_highspeed = 1; case 0x200: host->caps.has_rwproof = 1; + host->caps.need_blksz_mul_4 = 0; case 0x100: + host->caps.has_bad_data_ordering = 0; + host->caps.need_reset_after_xfer = 0; + case 0x0: break; default: host->caps.has_pdc = 0; @@ -2138,14 +2320,20 @@ static int __init atmci_probe(struct platform_device *pdev) if (pdata->slot[0].bus_width) { ret = atmci_init_slot(host, &pdata->slot[0], 0, ATMCI_SDCSEL_SLOT_A, ATMCI_SDIOIRQA); - if (!ret) + if (!ret) { nr_slots++; + host->buf_size = host->slot[0]->mmc->max_req_size; + } } if (pdata->slot[1].bus_width) { ret = atmci_init_slot(host, &pdata->slot[1], 1, ATMCI_SDCSEL_SLOT_B, ATMCI_SDIOIRQB); - if (!ret) + if (!ret) { nr_slots++; + if (host->slot[1]->mmc->max_req_size > host->buf_size) + host->buf_size = + host->slot[1]->mmc->max_req_size; + } } if (!nr_slots) { @@ -2153,6 +2341,19 @@ static int __init atmci_probe(struct platform_device *pdev) goto err_init_slot; } + if (!host->caps.has_rwproof) { + host->buffer = dma_alloc_coherent(&pdev->dev, host->buf_size, + &host->buf_phys_addr, + GFP_KERNEL); + if (!host->buffer) { + ret = -ENOMEM; + dev_err(&pdev->dev, "buffer allocation failed\n"); + goto err_init_slot; + } + } + + setup_timer(&host->timer, atmci_timeout_timer, (unsigned long)host); + dev_info(&pdev->dev, "Atmel MCI controller at 0x%08lx irq %d, %u slots\n", host->mapbase, irq, nr_slots); @@ -2179,6 +2380,10 @@ static int __exit atmci_remove(struct platform_device *pdev) platform_set_drvdata(pdev, NULL); + if (host->buffer) + dma_free_coherent(&pdev->dev, host->buf_size, + host->buffer, host->buf_phys_addr); + for (i = 0; i < ATMCI_MAX_NR_SLOTS; i++) { if (host->slot[i]) atmci_cleanup_slot(host->slot[i], i); |