summaryrefslogtreecommitdiffstats
path: root/drivers/mmc/host/mmci.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/mmc/host/mmci.c')
-rw-r--r--drivers/mmc/host/mmci.c148
1 files changed, 88 insertions, 60 deletions
diff --git a/drivers/mmc/host/mmci.c b/drivers/mmc/host/mmci.c
index 2ed435bd4b6..840b301b567 100644
--- a/drivers/mmc/host/mmci.c
+++ b/drivers/mmc/host/mmci.c
@@ -26,7 +26,6 @@
#include <linux/amba/mmci.h>
#include <linux/regulator/consumer.h>
-#include <asm/cacheflush.h>
#include <asm/div64.h>
#include <asm/io.h>
#include <asm/sizes.h>
@@ -37,12 +36,39 @@
static unsigned int fmax = 515633;
+/**
+ * struct variant_data - MMCI variant-specific quirks
+ * @clkreg: default value for MCICLOCK register
+ * @clkreg_enable: enable value for MMCICLOCK register
+ * @datalength_bits: number of bits in the MMCIDATALENGTH register
+ */
+struct variant_data {
+ unsigned int clkreg;
+ unsigned int clkreg_enable;
+ unsigned int datalength_bits;
+};
+
+static struct variant_data variant_arm = {
+ .datalength_bits = 16,
+};
+
+static struct variant_data variant_u300 = {
+ .clkreg_enable = 1 << 13, /* HWFCEN */
+ .datalength_bits = 16,
+};
+
+static struct variant_data variant_ux500 = {
+ .clkreg = MCI_CLK_ENABLE,
+ .clkreg_enable = 1 << 14, /* HWFCEN */
+ .datalength_bits = 24,
+};
/*
* This must be called with host->lock held
*/
static void mmci_set_clkreg(struct mmci_host *host, unsigned int desired)
{
- u32 clk = 0;
+ struct variant_data *variant = host->variant;
+ u32 clk = variant->clkreg;
if (desired) {
if (desired >= host->mclk) {
@@ -54,8 +80,8 @@ static void mmci_set_clkreg(struct mmci_host *host, unsigned int desired)
clk = 255;
host->cclk = host->mclk / (2 * (clk + 1));
}
- if (host->hw_designer == AMBA_VENDOR_ST)
- clk |= MCI_ST_FCEN; /* Bug fix in ST IP block */
+
+ clk |= variant->clkreg_enable;
clk |= MCI_CLK_ENABLE;
/* This hasn't proven to be worthwhile */
/* clk |= MCI_CLK_PWRSAVE; */
@@ -98,6 +124,18 @@ static void mmci_stop_data(struct mmci_host *host)
host->data = NULL;
}
+static void mmci_init_sg(struct mmci_host *host, struct mmc_data *data)
+{
+ unsigned int flags = SG_MITER_ATOMIC;
+
+ if (data->flags & MMC_DATA_READ)
+ flags |= SG_MITER_TO_SG;
+ else
+ flags |= SG_MITER_FROM_SG;
+
+ sg_miter_start(&host->sg_miter, data->sg, data->sg_len, flags);
+}
+
static void mmci_start_data(struct mmci_host *host, struct mmc_data *data)
{
unsigned int datactrl, timeout, irqmask;
@@ -109,7 +147,7 @@ static void mmci_start_data(struct mmci_host *host, struct mmc_data *data)
data->blksz, data->blocks, data->flags);
host->data = data;
- host->size = data->blksz;
+ host->size = data->blksz * data->blocks;
host->data_xfered = 0;
mmci_init_sg(host, data);
@@ -210,8 +248,17 @@ mmci_data_irq(struct mmci_host *host, struct mmc_data *data,
* We hit an error condition. Ensure that any data
* partially written to a page is properly coherent.
*/
- if (host->sg_len && data->flags & MMC_DATA_READ)
- flush_dcache_page(sg_page(host->sg_ptr));
+ if (data->flags & MMC_DATA_READ) {
+ struct sg_mapping_iter *sg_miter = &host->sg_miter;
+ unsigned long flags;
+
+ local_irq_save(flags);
+ if (sg_miter_next(sg_miter)) {
+ flush_dcache_page(sg_miter->page);
+ sg_miter_stop(sg_miter);
+ }
+ local_irq_restore(flags);
+ }
}
if (status & MCI_DATAEND) {
mmci_stop_data(host);
@@ -314,15 +361,18 @@ static int mmci_pio_write(struct mmci_host *host, char *buffer, unsigned int rem
static irqreturn_t mmci_pio_irq(int irq, void *dev_id)
{
struct mmci_host *host = dev_id;
+ struct sg_mapping_iter *sg_miter = &host->sg_miter;
void __iomem *base = host->base;
+ unsigned long flags;
u32 status;
status = readl(base + MMCISTATUS);
dev_dbg(mmc_dev(host->mmc), "irq1 (pio) %08x\n", status);
+ local_irq_save(flags);
+
do {
- unsigned long flags;
unsigned int remain, len;
char *buffer;
@@ -336,11 +386,11 @@ static irqreturn_t mmci_pio_irq(int irq, void *dev_id)
if (!(status & (MCI_TXFIFOHALFEMPTY|MCI_RXDATAAVLBL)))
break;
- /*
- * Map the current scatter buffer.
- */
- buffer = mmci_kmap_atomic(host, &flags) + host->sg_off;
- remain = host->sg_ptr->length - host->sg_off;
+ if (!sg_miter_next(sg_miter))
+ break;
+
+ buffer = sg_miter->addr;
+ remain = sg_miter->length;
len = 0;
if (status & MCI_RXACTIVE)
@@ -348,31 +398,24 @@ static irqreturn_t mmci_pio_irq(int irq, void *dev_id)
if (status & MCI_TXACTIVE)
len = mmci_pio_write(host, buffer, remain, status);
- /*
- * Unmap the buffer.
- */
- mmci_kunmap_atomic(host, buffer, &flags);
+ sg_miter->consumed = len;
- host->sg_off += len;
host->size -= len;
remain -= len;
if (remain)
break;
- /*
- * If we were reading, and we have completed this
- * page, ensure that the data cache is coherent.
- */
if (status & MCI_RXACTIVE)
- flush_dcache_page(sg_page(host->sg_ptr));
-
- if (!mmci_next_sg(host))
- break;
+ flush_dcache_page(sg_miter->page);
status = readl(base + MMCISTATUS);
} while (1);
+ sg_miter_stop(sg_miter);
+
+ local_irq_restore(flags);
+
/*
* If we're nearing the end of the read, switch to
* "any data available" mode.
@@ -477,16 +520,9 @@ static void mmci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
/* This implicitly enables the regulator */
mmc_regulator_set_ocr(host->vcc, ios->vdd);
#endif
- /*
- * The translate_vdd function is not used if you have
- * an external regulator, or your design is really weird.
- * Using it would mean sending in power control BOTH using
- * a regulator AND the 4 MMCIPWR bits. If we don't have
- * a regulator, we might have some other platform specific
- * power control behind this translate function.
- */
- if (!host->vcc && host->plat->translate_vdd)
- pwr |= host->plat->translate_vdd(mmc_dev(mmc), ios->vdd);
+ if (host->plat->vdd_handler)
+ pwr |= host->plat->vdd_handler(mmc_dev(mmc), ios->vdd,
+ ios->power_mode);
/* The ST version does not have this, fall through to POWER_ON */
if (host->hw_designer != AMBA_VENDOR_ST) {
pwr |= MCI_PWR_UP;
@@ -555,21 +591,10 @@ static const struct mmc_host_ops mmci_ops = {
.get_cd = mmci_get_cd,
};
-static void mmci_check_status(unsigned long data)
-{
- struct mmci_host *host = (struct mmci_host *)data;
- unsigned int status = mmci_get_cd(host->mmc);
-
- if (status ^ host->oldstat)
- mmc_detect_change(host->mmc, 0);
-
- host->oldstat = status;
- mod_timer(&host->timer, jiffies + HZ);
-}
-
static int __devinit mmci_probe(struct amba_device *dev, struct amba_id *id)
{
struct mmci_platform_data *plat = dev->dev.platform_data;
+ struct variant_data *variant = id->data;
struct mmci_host *host;
struct mmc_host *mmc;
int ret;
@@ -613,6 +638,7 @@ static int __devinit mmci_probe(struct amba_device *dev, struct amba_id *id)
goto clk_free;
host->plat = plat;
+ host->variant = variant;
host->mclk = clk_get_rate(host->clk);
/*
* According to the spec, mclk is max 100 MHz,
@@ -673,6 +699,7 @@ static int __devinit mmci_probe(struct amba_device *dev, struct amba_id *id)
if (host->vcc == NULL)
mmc->ocr_avail = plat->ocr_mask;
mmc->caps = plat->capabilities;
+ mmc->caps |= MMC_CAP_NEEDS_POLL;
/*
* We can do SGIO
@@ -681,10 +708,11 @@ static int __devinit mmci_probe(struct amba_device *dev, struct amba_id *id)
mmc->max_phys_segs = NR_SG;
/*
- * Since we only have a 16-bit data length register, we must
- * ensure that we don't exceed 2^16-1 bytes in a single request.
+ * Since only a certain number of bits are valid in the data length
+ * register, we must ensure that we don't exceed 2^num-1 bytes in a
+ * single request.
*/
- mmc->max_req_size = 65535;
+ mmc->max_req_size = (1 << variant->datalength_bits) - 1;
/*
* Set the maximum segment size. Since we aren't doing DMA
@@ -738,7 +766,6 @@ static int __devinit mmci_probe(struct amba_device *dev, struct amba_id *id)
writel(MCI_IRQENABLE, host->base + MMCIMASK0);
amba_set_drvdata(dev, mmc);
- host->oldstat = mmci_get_cd(host->mmc);
mmc_add_host(mmc);
@@ -746,12 +773,6 @@ static int __devinit mmci_probe(struct amba_device *dev, struct amba_id *id)
mmc_hostname(mmc), amba_rev(dev), amba_config(dev),
(unsigned long long)dev->res.start, dev->irq[0], dev->irq[1]);
- init_timer(&host->timer);
- host->timer.data = (unsigned long)host;
- host->timer.function = mmci_check_status;
- host->timer.expires = jiffies + HZ;
- add_timer(&host->timer);
-
return 0;
irq0_free:
@@ -785,8 +806,6 @@ static int __devexit mmci_remove(struct amba_device *dev)
if (mmc) {
struct mmci_host *host = mmc_priv(mmc);
- del_timer_sync(&host->timer);
-
mmc_remove_host(mmc);
writel(0, host->base + MMCIMASK0);
@@ -860,19 +879,28 @@ static struct amba_id mmci_ids[] = {
{
.id = 0x00041180,
.mask = 0x000fffff,
+ .data = &variant_arm,
},
{
.id = 0x00041181,
.mask = 0x000fffff,
+ .data = &variant_arm,
},
/* ST Micro variants */
{
.id = 0x00180180,
.mask = 0x00ffffff,
+ .data = &variant_u300,
},
{
.id = 0x00280180,
.mask = 0x00ffffff,
+ .data = &variant_u300,
+ },
+ {
+ .id = 0x00480180,
+ .mask = 0x00ffffff,
+ .data = &variant_ux500,
},
{ 0, 0 },
};