diff options
Diffstat (limited to 'drivers/mmc/host/mmci.c')
| -rw-r--r-- | drivers/mmc/host/mmci.c | 43 |
1 files changed, 37 insertions, 6 deletions
diff --git a/drivers/mmc/host/mmci.c b/drivers/mmc/host/mmci.c index b4a7e4fba90..7721de942c6 100644 --- a/drivers/mmc/host/mmci.c +++ b/drivers/mmc/host/mmci.c @@ -51,6 +51,7 @@ static unsigned int fmax = 515633; * is asserted (likewise for RX) * @sdio: variant supports SDIO * @st_clkdiv: true if using a ST-specific clock divider algorithm + * @blksz_datactrl16: true if Block size is at b16..b30 position in datactrl register */ struct variant_data { unsigned int clkreg; @@ -60,6 +61,7 @@ struct variant_data { unsigned int fifohalfsize; bool sdio; bool st_clkdiv; + bool blksz_datactrl16; }; static struct variant_data variant_arm = { @@ -77,7 +79,7 @@ static struct variant_data variant_arm_extended_fifo = { static struct variant_data variant_u300 = { .fifosize = 16 * 4, .fifohalfsize = 8 * 4, - .clkreg_enable = 1 << 13, /* HWFCEN */ + .clkreg_enable = MCI_ST_U300_HWFCEN, .datalength_bits = 16, .sdio = true, }; @@ -86,12 +88,23 @@ static struct variant_data variant_ux500 = { .fifosize = 30 * 4, .fifohalfsize = 8 * 4, .clkreg = MCI_CLK_ENABLE, - .clkreg_enable = 1 << 14, /* HWFCEN */ + .clkreg_enable = MCI_ST_UX500_HWFCEN, .datalength_bits = 24, .sdio = true, .st_clkdiv = true, }; +static struct variant_data variant_ux500v2 = { + .fifosize = 30 * 4, + .fifohalfsize = 8 * 4, + .clkreg = MCI_CLK_ENABLE, + .clkreg_enable = MCI_ST_UX500_HWFCEN, + .datalength_bits = 24, + .sdio = true, + .st_clkdiv = true, + .blksz_datactrl16 = true, +}; + /* * This must be called with host->lock held */ @@ -103,6 +116,8 @@ static void mmci_set_clkreg(struct mmci_host *host, unsigned int desired) if (desired) { if (desired >= host->mclk) { clk = MCI_CLK_BYPASS; + if (variant->st_clkdiv) + clk |= MCI_ST_UX500_NEG_EDGE; host->cclk = host->mclk; } else if (variant->st_clkdiv) { /* @@ -463,7 +478,10 @@ static void mmci_start_data(struct mmci_host *host, struct mmc_data *data) blksz_bits = ffs(data->blksz) - 1; BUG_ON(1 << blksz_bits != data->blksz); - datactrl = MCI_DPSM_ENABLE | blksz_bits << 4; + if (variant->blksz_datactrl16) + datactrl = MCI_DPSM_ENABLE | (data->blksz << 16); + else + datactrl = MCI_DPSM_ENABLE | blksz_bits << 4; if (data->flags & MMC_DATA_READ) datactrl |= MCI_DPSM_DIRECTION; @@ -1126,9 +1144,17 @@ static int __devinit mmci_probe(struct amba_device *dev, else if (ret != -ENOSYS) goto err_gpio_cd; + /* + * A gpio pin that will detect cards when inserted and removed + * will most likely want to trigger on the edges if it is + * 0 when ejected and 1 when inserted (or mutatis mutandis + * for the inverted case) so we request triggers on both + * edges. + */ ret = request_any_context_irq(gpio_to_irq(plat->gpio_cd), - mmci_cd_irq, 0, - DRIVER_NAME " (cd)", host); + mmci_cd_irq, + IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING, + DRIVER_NAME " (cd)", host); if (ret >= 0) host->gpio_cd_irq = gpio_to_irq(plat->gpio_cd); } @@ -1309,9 +1335,14 @@ static struct amba_id mmci_ids[] = { }, { .id = 0x00480180, - .mask = 0x00ffffff, + .mask = 0xf0ffffff, .data = &variant_ux500, }, + { + .id = 0x10480180, + .mask = 0xf0ffffff, + .data = &variant_ux500v2, + }, { 0, 0 }, }; |