diff options
Diffstat (limited to 'drivers/mmc/host/sdhci-pxa.c')
| -rw-r--r-- | drivers/mmc/host/sdhci-pxa.c | 48 |
1 files changed, 47 insertions, 1 deletions
diff --git a/drivers/mmc/host/sdhci-pxa.c b/drivers/mmc/host/sdhci-pxa.c index 5a61208cbc6..089c9a68b7b 100644 --- a/drivers/mmc/host/sdhci-pxa.c +++ b/drivers/mmc/host/sdhci-pxa.c @@ -69,7 +69,45 @@ static void set_clock(struct sdhci_host *host, unsigned int clock) } } +static int set_uhs_signaling(struct sdhci_host *host, unsigned int uhs) +{ + u16 ctrl_2; + + /* + * Set V18_EN -- UHS modes do not work without this. + * does not change signaling voltage + */ + ctrl_2 = sdhci_readw(host, SDHCI_HOST_CONTROL2); + + /* Select Bus Speed Mode for host */ + ctrl_2 &= ~SDHCI_CTRL_UHS_MASK; + switch (uhs) { + case MMC_TIMING_UHS_SDR12: + ctrl_2 |= SDHCI_CTRL_UHS_SDR12; + break; + case MMC_TIMING_UHS_SDR25: + ctrl_2 |= SDHCI_CTRL_UHS_SDR25; + break; + case MMC_TIMING_UHS_SDR50: + ctrl_2 |= SDHCI_CTRL_UHS_SDR50 | SDHCI_CTRL_VDD_180; + break; + case MMC_TIMING_UHS_SDR104: + ctrl_2 |= SDHCI_CTRL_UHS_SDR104 | SDHCI_CTRL_VDD_180; + break; + case MMC_TIMING_UHS_DDR50: + ctrl_2 |= SDHCI_CTRL_UHS_DDR50 | SDHCI_CTRL_VDD_180; + break; + } + + sdhci_writew(host, ctrl_2, SDHCI_HOST_CONTROL2); + pr_debug("%s:%s uhs = %d, ctrl_2 = %04X\n", + __func__, mmc_hostname(host->mmc), uhs, ctrl_2); + + return 0; +} + static struct sdhci_ops sdhci_pxa_ops = { + .set_uhs_signaling = set_uhs_signaling, .set_clock = set_clock, }; @@ -136,11 +174,19 @@ static int __devinit sdhci_pxa_probe(struct platform_device *pdev) host->hw_name = "MMC"; host->ops = &sdhci_pxa_ops; host->irq = irq; - host->quirks = SDHCI_QUIRK_BROKEN_ADMA | SDHCI_QUIRK_BROKEN_TIMEOUT_VAL; + host->quirks = SDHCI_QUIRK_BROKEN_ADMA + | SDHCI_QUIRK_BROKEN_TIMEOUT_VAL + | SDHCI_QUIRK_32BIT_DMA_ADDR + | SDHCI_QUIRK_32BIT_DMA_SIZE + | SDHCI_QUIRK_32BIT_ADMA_SIZE + | SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC; if (pdata->quirks) host->quirks |= pdata->quirks; + /* enable 1/8V DDR capable */ + host->mmc->caps |= MMC_CAP_1_8V_DDR; + /* If slot design supports 8 bit data, indicate this to MMC. */ if (pdata->flags & PXA_FLAG_SD_8_BIT_CAPABLE_SLOT) host->mmc->caps |= MMC_CAP_8_BIT_DATA; |