diff options
Diffstat (limited to 'drivers/mmc/host/sdhci-pxav3.c')
| -rw-r--r-- | drivers/mmc/host/sdhci-pxav3.c | 289 |
1 files changed, 289 insertions, 0 deletions
diff --git a/drivers/mmc/host/sdhci-pxav3.c b/drivers/mmc/host/sdhci-pxav3.c new file mode 100644 index 00000000000..901f00fb252 --- /dev/null +++ b/drivers/mmc/host/sdhci-pxav3.c @@ -0,0 +1,289 @@ +/* + * Copyright (C) 2010 Marvell International Ltd. + * Zhangfei Gao <zhangfei.gao@marvell.com> + * Kevin Wang <dwang4@marvell.com> + * Mingwei Wang <mwwang@marvell.com> + * Philip Rakity <prakity@marvell.com> + * Mark Brown <markb@marvell.com> + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ +#include <linux/err.h> +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/clk.h> +#include <linux/io.h> +#include <linux/gpio.h> +#include <linux/mmc/card.h> +#include <linux/mmc/host.h> +#include <plat/sdhci.h> +#include <linux/slab.h> +#include <linux/delay.h> +#include "sdhci.h" +#include "sdhci-pltfm.h" + +#define SD_CLOCK_BURST_SIZE_SETUP 0x10A +#define SDCLK_SEL 0x100 +#define SDCLK_DELAY_SHIFT 9 +#define SDCLK_DELAY_MASK 0x1f + +#define SD_CFG_FIFO_PARAM 0x100 +#define SDCFG_GEN_PAD_CLK_ON (1<<6) +#define SDCFG_GEN_PAD_CLK_CNT_MASK 0xFF +#define SDCFG_GEN_PAD_CLK_CNT_SHIFT 24 + +#define SD_SPI_MODE 0x108 +#define SD_CE_ATA_1 0x10C + +#define SD_CE_ATA_2 0x10E +#define SDCE_MISC_INT (1<<2) +#define SDCE_MISC_INT_EN (1<<1) + +static void pxav3_set_private_registers(struct sdhci_host *host, u8 mask) +{ + struct platform_device *pdev = to_platform_device(mmc_dev(host->mmc)); + struct sdhci_pxa_platdata *pdata = pdev->dev.platform_data; + + if (mask == SDHCI_RESET_ALL) { + /* + * tune timing of read data/command when crc error happen + * no performance impact + */ + if (pdata && 0 != pdata->clk_delay_cycles) { + u16 tmp; + + tmp = readw(host->ioaddr + SD_CLOCK_BURST_SIZE_SETUP); + tmp |= (pdata->clk_delay_cycles & SDCLK_DELAY_MASK) + << SDCLK_DELAY_SHIFT; + tmp |= SDCLK_SEL; + writew(tmp, host->ioaddr + SD_CLOCK_BURST_SIZE_SETUP); + } + } +} + +#define MAX_WAIT_COUNT 5 +static void pxav3_gen_init_74_clocks(struct sdhci_host *host, u8 power_mode) +{ + struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); + struct sdhci_pxa *pxa = pltfm_host->priv; + u16 tmp; + int count; + + if (pxa->power_mode == MMC_POWER_UP + && power_mode == MMC_POWER_ON) { + + dev_dbg(mmc_dev(host->mmc), + "%s: slot->power_mode = %d," + "ios->power_mode = %d\n", + __func__, + pxa->power_mode, + power_mode); + + /* set we want notice of when 74 clocks are sent */ + tmp = readw(host->ioaddr + SD_CE_ATA_2); + tmp |= SDCE_MISC_INT_EN; + writew(tmp, host->ioaddr + SD_CE_ATA_2); + + /* start sending the 74 clocks */ + tmp = readw(host->ioaddr + SD_CFG_FIFO_PARAM); + tmp |= SDCFG_GEN_PAD_CLK_ON; + writew(tmp, host->ioaddr + SD_CFG_FIFO_PARAM); + + /* slowest speed is about 100KHz or 10usec per clock */ + udelay(740); + count = 0; + + while (count++ < MAX_WAIT_COUNT) { + if ((readw(host->ioaddr + SD_CE_ATA_2) + & SDCE_MISC_INT) == 0) + break; + udelay(10); + } + + if (count == MAX_WAIT_COUNT) + dev_warn(mmc_dev(host->mmc), "74 clock interrupt not cleared\n"); + + /* clear the interrupt bit if posted */ + tmp = readw(host->ioaddr + SD_CE_ATA_2); + tmp |= SDCE_MISC_INT; + writew(tmp, host->ioaddr + SD_CE_ATA_2); + } + pxa->power_mode = power_mode; +} + +static int pxav3_set_uhs_signaling(struct sdhci_host *host, unsigned int uhs) +{ + u16 ctrl_2; + + /* + * Set V18_EN -- UHS modes do not work without this. + * does not change signaling voltage + */ + ctrl_2 = sdhci_readw(host, SDHCI_HOST_CONTROL2); + + /* Select Bus Speed Mode for host */ + ctrl_2 &= ~SDHCI_CTRL_UHS_MASK; + switch (uhs) { + case MMC_TIMING_UHS_SDR12: + ctrl_2 |= SDHCI_CTRL_UHS_SDR12; + break; + case MMC_TIMING_UHS_SDR25: + ctrl_2 |= SDHCI_CTRL_UHS_SDR25; + break; + case MMC_TIMING_UHS_SDR50: + ctrl_2 |= SDHCI_CTRL_UHS_SDR50 | SDHCI_CTRL_VDD_180; + break; + case MMC_TIMING_UHS_SDR104: + ctrl_2 |= SDHCI_CTRL_UHS_SDR104 | SDHCI_CTRL_VDD_180; + break; + case MMC_TIMING_UHS_DDR50: + ctrl_2 |= SDHCI_CTRL_UHS_DDR50 | SDHCI_CTRL_VDD_180; + break; + } + + sdhci_writew(host, ctrl_2, SDHCI_HOST_CONTROL2); + dev_dbg(mmc_dev(host->mmc), + "%s uhs = %d, ctrl_2 = %04X\n", + __func__, uhs, ctrl_2); + + return 0; +} + +static struct sdhci_ops pxav3_sdhci_ops = { + .platform_reset_exit = pxav3_set_private_registers, + .set_uhs_signaling = pxav3_set_uhs_signaling, + .platform_send_init_74_clocks = pxav3_gen_init_74_clocks, +}; + +static int __devinit sdhci_pxav3_probe(struct platform_device *pdev) +{ + struct sdhci_pltfm_host *pltfm_host; + struct sdhci_pxa_platdata *pdata = pdev->dev.platform_data; + struct device *dev = &pdev->dev; + struct sdhci_host *host = NULL; + struct sdhci_pxa *pxa = NULL; + int ret; + struct clk *clk; + + pxa = kzalloc(sizeof(struct sdhci_pxa), GFP_KERNEL); + if (!pxa) + return -ENOMEM; + + host = sdhci_pltfm_init(pdev, NULL); + if (IS_ERR(host)) { + kfree(pxa); + return PTR_ERR(host); + } + pltfm_host = sdhci_priv(host); + pltfm_host->priv = pxa; + + clk = clk_get(dev, "PXA-SDHCLK"); + if (IS_ERR(clk)) { + dev_err(dev, "failed to get io clock\n"); + ret = PTR_ERR(clk); + goto err_clk_get; + } + pltfm_host->clk = clk; + clk_enable(clk); + + host->quirks = SDHCI_QUIRK_BROKEN_TIMEOUT_VAL + | SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC; + + /* enable 1/8V DDR capable */ + host->mmc->caps |= MMC_CAP_1_8V_DDR; + + if (pdata) { + if (pdata->flags & PXA_FLAG_CARD_PERMANENT) { + /* on-chip device */ + host->quirks |= SDHCI_QUIRK_BROKEN_CARD_DETECTION; + host->mmc->caps |= MMC_CAP_NONREMOVABLE; + } + + /* If slot design supports 8 bit data, indicate this to MMC. */ + if (pdata->flags & PXA_FLAG_SD_8_BIT_CAPABLE_SLOT) + host->mmc->caps |= MMC_CAP_8_BIT_DATA; + + if (pdata->quirks) + host->quirks |= pdata->quirks; + if (pdata->host_caps) + host->mmc->caps |= pdata->host_caps; + if (pdata->pm_caps) + host->mmc->pm_caps |= pdata->pm_caps; + } + + host->ops = &pxav3_sdhci_ops; + + ret = sdhci_add_host(host); + if (ret) { + dev_err(&pdev->dev, "failed to add host\n"); + goto err_add_host; + } + + platform_set_drvdata(pdev, host); + + return 0; + +err_add_host: + clk_disable(clk); + clk_put(clk); +err_clk_get: + sdhci_pltfm_free(pdev); + kfree(pxa); + return ret; +} + +static int __devexit sdhci_pxav3_remove(struct platform_device *pdev) +{ + struct sdhci_host *host = platform_get_drvdata(pdev); + struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); + struct sdhci_pxa *pxa = pltfm_host->priv; + + sdhci_remove_host(host, 1); + + clk_disable(pltfm_host->clk); + clk_put(pltfm_host->clk); + sdhci_pltfm_free(pdev); + kfree(pxa); + + platform_set_drvdata(pdev, NULL); + + return 0; +} + +static struct platform_driver sdhci_pxav3_driver = { + .driver = { + .name = "sdhci-pxav3", + .owner = THIS_MODULE, + }, + .probe = sdhci_pxav3_probe, + .remove = __devexit_p(sdhci_pxav3_remove), +#ifdef CONFIG_PM + .suspend = sdhci_pltfm_suspend, + .resume = sdhci_pltfm_resume, +#endif +}; +static int __init sdhci_pxav3_init(void) +{ + return platform_driver_register(&sdhci_pxav3_driver); +} + +static void __exit sdhci_pxav3_exit(void) +{ + platform_driver_unregister(&sdhci_pxav3_driver); +} + +module_init(sdhci_pxav3_init); +module_exit(sdhci_pxav3_exit); + +MODULE_DESCRIPTION("SDHCI driver for pxav3"); +MODULE_AUTHOR("Marvell International Ltd."); +MODULE_LICENSE("GPL v2"); + |