diff options
Diffstat (limited to 'drivers/mmc/host/sdhci.c')
-rw-r--r-- | drivers/mmc/host/sdhci.c | 123 |
1 files changed, 73 insertions, 50 deletions
diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c index 7922adb4238..6f0bfc0c8c9 100644 --- a/drivers/mmc/host/sdhci.c +++ b/drivers/mmc/host/sdhci.c @@ -1315,16 +1315,19 @@ static void sdhci_request(struct mmc_host *mmc, struct mmc_request *mrq) */ if ((host->flags & SDHCI_NEEDS_RETUNING) && !(present_state & (SDHCI_DOING_WRITE | SDHCI_DOING_READ))) { - /* eMMC uses cmd21 while sd and sdio use cmd19 */ - tuning_opcode = mmc->card->type == MMC_TYPE_MMC ? - MMC_SEND_TUNING_BLOCK_HS200 : - MMC_SEND_TUNING_BLOCK; - spin_unlock_irqrestore(&host->lock, flags); - sdhci_execute_tuning(mmc, tuning_opcode); - spin_lock_irqsave(&host->lock, flags); - - /* Restore original mmc_request structure */ - host->mrq = mrq; + if (mmc->card) { + /* eMMC uses cmd21 but sd and sdio use cmd19 */ + tuning_opcode = + mmc->card->type == MMC_TYPE_MMC ? + MMC_SEND_TUNING_BLOCK_HS200 : + MMC_SEND_TUNING_BLOCK; + spin_unlock_irqrestore(&host->lock, flags); + sdhci_execute_tuning(mmc, tuning_opcode); + spin_lock_irqsave(&host->lock, flags); + + /* Restore original mmc_request structure */ + host->mrq = mrq; + } } if (mrq->sbc && !(host->flags & SDHCI_AUTO_CMD23)) @@ -1615,7 +1618,7 @@ static int sdhci_do_3_3v_signal_voltage_switch(struct sdhci_host *host, sdhci_writew(host, ctrl, SDHCI_HOST_CONTROL2); if (host->vqmmc) { - ret = regulator_set_voltage(host->vqmmc, 3300000, 3300000); + ret = regulator_set_voltage(host->vqmmc, 2700000, 3600000); if (ret) { pr_warning("%s: Switching to 3.3V signalling voltage " " failed\n", mmc_hostname(host->mmc)); @@ -1659,7 +1662,7 @@ static int sdhci_do_1_8v_signal_voltage_switch(struct sdhci_host *host, */ if (host->vqmmc) ret = regulator_set_voltage(host->vqmmc, - 1800000, 1800000); + 1700000, 1950000); else ret = 0; @@ -1991,30 +1994,11 @@ static void sdhci_enable_preset_value(struct mmc_host *mmc, bool enable) sdhci_runtime_pm_put(host); } -static const struct mmc_host_ops sdhci_ops = { - .request = sdhci_request, - .set_ios = sdhci_set_ios, - .get_ro = sdhci_get_ro, - .hw_reset = sdhci_hw_reset, - .enable_sdio_irq = sdhci_enable_sdio_irq, - .start_signal_voltage_switch = sdhci_start_signal_voltage_switch, - .execute_tuning = sdhci_execute_tuning, - .enable_preset_value = sdhci_enable_preset_value, -}; - -/*****************************************************************************\ - * * - * Tasklets * - * * -\*****************************************************************************/ - -static void sdhci_tasklet_card(unsigned long param) +static void sdhci_card_event(struct mmc_host *mmc) { - struct sdhci_host *host; + struct sdhci_host *host = mmc_priv(mmc); unsigned long flags; - host = (struct sdhci_host*)param; - spin_lock_irqsave(&host->lock, flags); /* Check host->mrq first in case we are runtime suspended */ @@ -2033,6 +2017,31 @@ static void sdhci_tasklet_card(unsigned long param) } spin_unlock_irqrestore(&host->lock, flags); +} + +static const struct mmc_host_ops sdhci_ops = { + .request = sdhci_request, + .set_ios = sdhci_set_ios, + .get_ro = sdhci_get_ro, + .hw_reset = sdhci_hw_reset, + .enable_sdio_irq = sdhci_enable_sdio_irq, + .start_signal_voltage_switch = sdhci_start_signal_voltage_switch, + .execute_tuning = sdhci_execute_tuning, + .enable_preset_value = sdhci_enable_preset_value, + .card_event = sdhci_card_event, +}; + +/*****************************************************************************\ + * * + * Tasklets * + * * +\*****************************************************************************/ + +static void sdhci_tasklet_card(unsigned long param) +{ + struct sdhci_host *host = (struct sdhci_host*)param; + + sdhci_card_event(host->mmc); mmc_detect_change(host->mmc, msecs_to_jiffies(200)); } @@ -2279,6 +2288,8 @@ static void sdhci_data_irq(struct sdhci_host *host, u32 intmask) pr_err("%s: ADMA error\n", mmc_hostname(host->mmc)); sdhci_show_adma_error(host); host->data->error = -EIO; + if (host->ops->adma_workaround) + host->ops->adma_workaround(host, intmask); } if (host->data->error) @@ -2837,6 +2848,9 @@ int sdhci_add_host(struct sdhci_host *host) if (!(host->quirks & SDHCI_QUIRK_FORCE_1_BIT_DATA)) mmc->caps |= MMC_CAP_4_BIT_DATA; + if (host->quirks2 & SDHCI_QUIRK2_HOST_NO_CMD23) + mmc->caps &= ~MMC_CAP_CMD23; + if (caps[0] & SDHCI_CAN_DO_HISPD) mmc->caps |= MMC_CAP_SD_HIGHSPEED | MMC_CAP_MMC_HIGHSPEED; @@ -2846,13 +2860,22 @@ int sdhci_add_host(struct sdhci_host *host) /* If vqmmc regulator and no 1.8V signalling, then there's no UHS */ host->vqmmc = regulator_get(mmc_dev(mmc), "vqmmc"); - if (IS_ERR(host->vqmmc)) { - pr_info("%s: no vqmmc regulator found\n", mmc_hostname(mmc)); - host->vqmmc = NULL; - } - else if (regulator_is_supported_voltage(host->vqmmc, 1800000, 1800000)) + if (IS_ERR_OR_NULL(host->vqmmc)) { + if (PTR_ERR(host->vqmmc) < 0) { + pr_info("%s: no vqmmc regulator found\n", + mmc_hostname(mmc)); + host->vqmmc = NULL; + } + } else { regulator_enable(host->vqmmc); - else + if (!regulator_is_supported_voltage(host->vqmmc, 1700000, + 1950000)) + caps[1] &= ~(SDHCI_SUPPORT_SDR104 | + SDHCI_SUPPORT_SDR50 | + SDHCI_SUPPORT_DDR50); + } + + if (host->quirks2 & SDHCI_QUIRK2_NO_1_8_V) caps[1] &= ~(SDHCI_SUPPORT_SDR104 | SDHCI_SUPPORT_SDR50 | SDHCI_SUPPORT_DDR50); @@ -2904,24 +2927,24 @@ int sdhci_add_host(struct sdhci_host *host) ocr_avail = 0; host->vmmc = regulator_get(mmc_dev(mmc), "vmmc"); - if (IS_ERR(host->vmmc)) { - pr_info("%s: no vmmc regulator found\n", mmc_hostname(mmc)); - host->vmmc = NULL; - } else - regulator_enable(host->vmmc); + if (IS_ERR_OR_NULL(host->vmmc)) { + if (PTR_ERR(host->vmmc) < 0) { + pr_info("%s: no vmmc regulator found\n", + mmc_hostname(mmc)); + host->vmmc = NULL; + } + } #ifdef CONFIG_REGULATOR if (host->vmmc) { - ret = regulator_is_supported_voltage(host->vmmc, 3300000, - 3300000); + ret = regulator_is_supported_voltage(host->vmmc, 2700000, + 3600000); if ((ret <= 0) || (!(caps[0] & SDHCI_CAN_VDD_330))) caps[0] &= ~SDHCI_CAN_VDD_330; - ret = regulator_is_supported_voltage(host->vmmc, 3000000, - 3000000); if ((ret <= 0) || (!(caps[0] & SDHCI_CAN_VDD_300))) caps[0] &= ~SDHCI_CAN_VDD_300; - ret = regulator_is_supported_voltage(host->vmmc, 1800000, - 1800000); + ret = regulator_is_supported_voltage(host->vmmc, 1700000, + 1950000); if ((ret <= 0) || (!(caps[0] & SDHCI_CAN_VDD_180))) caps[0] &= ~SDHCI_CAN_VDD_180; } |